Linux version 2.6.8-1.541 (bhcompile@porky.build.redhat.com) (gcc version 3.4.1 20040831 (Red Hat 3.4.1-10)) #1 Wed Sep 1 18:01:20 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000013cf0000 (usable) BIOS-e820: 0000000013cf0000 - 0000000013cfc000 (ACPI data) BIOS-e820: 0000000013cfc000 - 0000000013d00000 (ACPI NVS) BIOS-e820: 0000000013d00000 - 0000000013e80000 (usable) BIOS-e820: 0000000013e80000 - 0000000014000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 318MB LOWMEM available. zapping low mappings. On node 0 totalpages: 81536 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 77440 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f7120 ACPI: RSDT (v001 SONY U1 0x20010312 PTL 0x00000000) @ 0x13cf74cb ACPI: FADT (v001 SONY U1 0x20010312 PTL 0x01000000) @ 0x13cfbf64 ACPI: BOOT (v001 SONY U1 0x20010312 PTL 0x00000001) @ 0x13cfbfd8 ACPI: DSDT (v001 SONY U1 0x20010312 PTL 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Built 1 zonelists Kernel command line: ro root=LABEL=/1 mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=023c6000 soft=023c5000 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 745.549 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 318988k/326144k available (2024k kernel code, 6520k reserved, 631k data, 144k init, 0k highmem) Calibrating delay loop... 1470.46 BogoMIPS (lpj=735232) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. checking if image is initramfs... it is Freeing initrd memory: 325k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040715 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: Embedded Controller [EC0] (gpe 28) ACPI: PCI Interrupt Link [LNKA] (IRQs 9) *0 ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs *9) ACPI: PCI Interrupt Link [LNKE] (IRQs *9) ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0 Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 9 (level, low) -> IRQ 9 get_random_bytes called before random driver initialization vesafb: probe of vesafb0 failed with error -6 Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1094884297.4294966409:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key EB180CB126A51024 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states) ACPI: Thermal Zone [ATF0] (57 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i815 Chipset. agpgart: Maximum main memory to use for agp memory: 261M agpgart: AGP aperture is 64M @ 0xf8000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2M: IDE controller at PCI slot 0000:00:1f.1 ICH2M: chipset revision 3 ICH2M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: TOSHIBA MK6026GAX, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 > ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 16Kbytes TCP: Hash tables configured (established 32768 bind 9362) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S3 S4 S5) ACPI wakeup devices: PWRB LAN CRD0 EC0 COMA USB1 USB2 MODE Freeing unused kernel memory: 144k freed SCSI subsystem initialized ohci1394: $Rev: 1223 $ Ben Collins ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 9 (level, low) -> IRQ 9 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[f4101000-f41017ff] Max Packet=[2048] sbp2: $Rev: 1219 $ Ben Collins kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks ieee1394: Node added: ID:BUS[0-00:1023] GUID[0800460300c95afb] ieee1394: Host added: ID:BUS[0-01:1023] GUID[0800460300c2f7fa] scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices ieee1394: sbp2: Logged into SBP-2 device ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] Vendor: MATSHITA Model: UJDA710 Rev: 1.04 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 kmodule: Using deprecated /dev/sg mechanism instead of SG_IO on the actual device inserting floppy driver for 2.6.8-1.541 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 9 (level, low) -> IRQ 9 divert: allocating divert_blk for eth0 e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 08:00:46:16:AE:D5 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49339 usecs intel8x0: clocking to 48000 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1f.6 to 64 MC'97 1 converters and GPIO not ready (0xff00) i8xx TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware hw_random hardware driver 1.0.0 loaded USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:1f.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 9, io base 00001820 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:1f.4: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 9, io base 00002400 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 9 (level, low) -> IRQ 9 Yenta: CardBus bridge found at 0000:01:02.0 [104d:80e0] Yenta: ISA IRQ mask 0x0090, PCI irq 9 Socket status: 30000006 usb 1-1: new full speed USB device using address 2 hub 1-1:1.0: USB hub found hub 1-1:1.0: 3 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 2-1: new full speed USB device using address 2 usb 1-1.1: new low speed USB device using address 3 Initializing USB Mass Storage driver... scsi1 : SCSI emulation for USB Mass Storage devices Vendor: Sony Model: MSC-U02 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1f.2-1.1 input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1f.2-1.1 usb 1-1.2: new low speed USB device using address 4 ACPI: AC Adapter [ACAD] (on-line) input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1f.2-1.2 ACPI: Battery Slot [BAT1] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PWRB] EXT3 FS on hda9, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 650592k swap on /dev/hda7. Priority:-1 extents:1 Adding 650592k swap on /dev/hda10. Priority:-2 extents:1