[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0 (root@tm-stc) (gcc version 4.6.3 (Gentoo 4.6.3 p1.13, pie-0.5.2) ) #3 SMP Thu Sep 5 01:47:16 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-3.11 root=/dev/sda3 ro radeon.dpm=1 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd9ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfda0000-0x00000000bfdd0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfdd1000-0x00000000bfdfffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-970A-UD3/GA-970A-UD3, BIOS F7 10/22/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000043f000000 aka 17392M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbfda0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4c60-0x000f4c6f] mapped at [ffff8800000f4c60] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x020c8000, 0x020c8fff] PGTABLE [ 0.000000] BRK [0x020c9000, 0x020c9fff] PGTABLE [ 0.000000] BRK [0x020ca000, 0x020cafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43ee00000-0x43effffff] [ 0.000000] [mem 0x43ee00000-0x43effffff] page 2M [ 0.000000] BRK [0x020cb000, 0x020cbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43edfffff] [ 0.000000] [mem 0x43c000000-0x43edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff] [ 0.000000] [mem 0x400000000-0x43bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfd9ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbfbfffff] page 2M [ 0.000000] [mem 0xbfc00000-0xbfd9ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] ACPI: RSDP 00000000000f6b80 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000bfdd1000 0004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000bfdd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000bfdd1100 0792A (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bfda0000 00040 [ 0.000000] ACPI: MSDM 00000000bfdd8b00 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: HPET 00000000bfdd8b80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000bfdd8bc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000bfdd8c40 00860 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: MATS 00000000bfdd94a0 00034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000bfdd9510 00182 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000bfdd8a40 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 00000000bfdd96c0 061FD (v01 MATS RCM 80000001 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bfddf930 01714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43effffff] [ 0.000000] NODE_DATA [mem 0x43effa000-0x43effdfff] [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x43effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbfd9ffff] [ 0.000000] node 0: [mem 0x100000000-0x43effffff] [ 0.000000] On node 0 totalpages: 4189502 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12215 pages used for memmap [ 0.000000] DMA32 zone: 781728 pages, LIFO batch:31 [ 0.000000] Normal zone: 53184 pages used for memmap [ 0.000000] Normal zone: 3403776 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfda0000-0xbfdd0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfdd1000-0xbfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xbff00000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88043ec00000 s80384 r8192 d22016 u262144 [ 0.000000] pcpu-alloc: s80384 r8192 d22016 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4124018 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-3.11 root=/dev/sda3 ro radeon.dpm=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 6cfe000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 16345944K/16758008K available (9308K kernel code, 814K rwdata, 3656K rodata, 968K init, 1020K bss, 412064K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 3523.643 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7047.28 BogoMIPS (lpj=3523643) [ 0.000144] pid_max: default: 32768 minimum: 301 [ 0.000232] Security Framework initialized [ 0.000303] SELinux: Initializing. [ 0.000377] SELinux: Starting in permissive mode [ 0.001194] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.005178] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006978] Mount-cache hash table entries: 256 [ 0.007196] Initializing cgroup subsys freezer [ 0.007281] tseg: 00bff00000 [ 0.007282] CPU: Physical Processor ID: 0 [ 0.007352] CPU: Processor Core ID: 0 [ 0.007421] mce: CPU supports 7 MCE banks [ 0.007495] LVT offset 1 assigned for vector 0xf9 [ 0.007568] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512 tlb_flushall_shift: 5 [ 0.007818] Freeing SMP alternatives memory: 32K (ffffffff81fbf000 - ffffffff81fc7000) [ 0.007928] ACPI: Core revision 20130517 [ 0.009722] ACPI: All ACPI Tables successfully acquired [ 0.069518] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079609] smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (fam: 15, model: 02, stepping: 00) [ 0.180995] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.181159] ... version: 0 [ 0.181229] ... bit width: 48 [ 0.181299] ... generic registers: 6 [ 0.181369] ... value mask: 0000ffffffffffff [ 0.181440] ... max period: 00007fffffffffff [ 0.181510] ... fixed-purpose events: 0 [ 0.181580] ... event mask: 000000000000003f [ 0.181774] MCE: In-kernel MCE decoding enabled. [ 0.181925] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK [ 0.274909] Brought up 8 CPUs [ 0.274982] smpboot: Total of 8 processors activated (56378.28 BogoMIPS) [ 0.284982] devtmpfs: initialized [ 0.285200] PM: Registering ACPI NVS region [mem 0xbfda0000-0xbfdd0fff] (200704 bytes) [ 0.285414] kworker/u16:0 (42) used greatest stack depth: 5648 bytes left [ 0.285528] xor: automatically using best checksumming function: [ 0.295131] avx : 4564.000 MB/sec [ 0.295214] RTC time: 15:33:28, date: 09/05/13 [ 0.295315] NET: Registered protocol family 16 [ 0.295757] ACPI: bus type PCI registered [ 0.295899] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.296011] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.305552] PCI: Using configuration type 1 for base access [ 0.305995] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.306065] mtrr: probably your BIOS does not setup all CPUs. [ 0.306135] mtrr: corrected configuration. [ 0.314248] bio: create slab at 0 [ 0.331179] raid6: sse2x1 6796 MB/s [ 0.348198] raid6: sse2x2 10371 MB/s [ 0.365219] raid6: sse2x4 12050 MB/s [ 0.365288] raid6: using algorithm sse2x4 (12050 MB/s) [ 0.365358] raid6: using ssse3x2 recovery algorithm [ 0.365504] ACPI: Added _OSI(Module Device) [ 0.365573] ACPI: Added _OSI(Processor Device) [ 0.365642] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.366912] ACPI: Added _OSI(Processor Aggregator Device) [ 0.367467] ACPI: EC: Look up EC in DSDT [ 0.373391] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0xD2, should be 0xD1 (20130517/tbprint-204) [ 0.373667] ACPI: Interpreter enabled [ 0.373742] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) [ 0.373916] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.374096] ACPI: (supports S0 S3 S4 S5) [ 0.374168] ACPI: Using IOAPIC for interrupt routing [ 0.374325] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.374485] ACPI: No dock devices found. [ 0.419460] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.419674] PCI host bridge to bus 0000:00 [ 0.419746] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.419818] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.419889] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.419960] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.420032] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.420104] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.420176] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] [ 0.420258] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.420269] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.420396] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.420425] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.420462] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.420576] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.420606] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.420642] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.420758] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.420786] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.420822] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.420934] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.420962] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.420998] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.421120] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.421134] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.421141] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.421148] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.421155] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.421162] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.421169] pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff] [ 0.421184] pci 0000:00:11.0: set SATA to AHCI mode [ 0.421352] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.421362] pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff] [ 0.421433] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.421550] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.421564] pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff] [ 0.421624] pci 0000:00:12.2: supports D1 D2 [ 0.421626] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.421663] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.421779] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.421789] pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff] [ 0.421860] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.421977] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.421991] pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff] [ 0.422051] pci 0000:00:13.2: supports D1 D2 [ 0.422053] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.422091] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.422207] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.422322] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.422332] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.422339] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.422346] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.422353] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.422360] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 0.422449] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.422465] pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit] [ 0.422512] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.422548] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.422661] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.422779] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.422835] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.422946] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.422956] pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff] [ 0.423028] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.423144] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.423197] pci 0000:00:15.0: supports D1 D2 [ 0.423235] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.423349] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.423359] pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff] [ 0.423431] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.423547] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.423561] pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff] [ 0.423622] pci 0000:00:16.2: supports D1 D2 [ 0.423623] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.423662] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.423777] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.423853] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.423925] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.423998] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.424074] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.424145] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.424282] pci 0000:01:00.0: [1002:665c] type 00 class 0x030000 [ 0.424297] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.424308] pci 0000:01:00.0: reg 0x18: [mem 0xdf800000-0xdfffffff 64bit pref] [ 0.424314] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff] [ 0.424321] pci 0000:01:00.0: reg 0x24: [mem 0xfd580000-0xfd5bffff] [ 0.424328] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.424365] pci 0000:01:00.0: supports D1 D2 [ 0.424367] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.424429] pci 0000:01:00.1: [1002:aac0] type 00 class 0x040300 [ 0.424442] pci 0000:01:00.1: reg 0x10: [mem 0xfd5fc000-0xfd5fffff 64bit] [ 0.424505] pci 0000:01:00.1: supports D1 D2 [ 0.426303] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.426376] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.426378] pci 0000:00:02.0: bridge window [mem 0xfd500000-0xfd5fffff] [ 0.426381] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.426456] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.426470] pci 0000:02:00.0: reg 0x10: [mem 0xfd4f8000-0xfd4fffff 64bit] [ 0.426534] pci 0000:02:00.0: supports D1 D2 [ 0.426535] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.428304] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.428377] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] [ 0.428379] pci 0000:00:04.0: bridge window [mem 0xfd400000-0xfd4fffff] [ 0.428382] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.428457] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.428469] pci 0000:03:00.0: reg 0x10: [io 0xee00-0xeeff] [ 0.428487] pci 0000:03:00.0: reg 0x18: [mem 0xfdcff000-0xfdcfffff 64bit pref] [ 0.428499] pci 0000:03:00.0: reg 0x20: [mem 0xfdcf8000-0xfdcfbfff 64bit pref] [ 0.428550] pci 0000:03:00.0: supports D1 D2 [ 0.428551] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.430307] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.430380] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.430382] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.430385] pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.430462] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.430477] pci 0000:04:00.0: reg 0x10: [mem 0xfdbf8000-0xfdbfffff 64bit] [ 0.430541] pci 0000:04:00.0: supports D1 D2 [ 0.430543] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.432309] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.432382] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.432385] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.432388] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.432465] pci 0000:05:0e.0: [1106:3044] type 00 class 0x0c0010 [ 0.432484] pci 0000:05:0e.0: reg 0x10: [mem 0xfdaff000-0xfdaff7ff] [ 0.432494] pci 0000:05:0e.0: reg 0x14: [io 0xaf00-0xaf7f] [ 0.432568] pci 0000:05:0e.0: supports D2 [ 0.432569] pci 0000:05:0e.0: PME# supported from D2 D3hot D3cold [ 0.432638] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 0.432711] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.432714] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff] [ 0.432717] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref] [ 0.432719] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.432720] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.432722] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.432723] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.432725] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.432726] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.432791] pci 0000:00:15.0: PCI bridge to [bus 06] [ 0.432864] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff] [ 0.432867] pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.432871] pci 0000:00:15.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.432886] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.432995] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.447387] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 0.447795] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 0.448202] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 0.448610] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 0.449016] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 0.449428] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 0.449832] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 0.450237] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 0.450957] ACPI: \_SB_.PCI0: notify handler is installed [ 0.450980] Found 1 acpi root devices [ 0.451136] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.451246] vgaarb: loaded [ 0.451314] vgaarb: bridge control possible 0000:01:00.0 [ 0.451498] SCSI subsystem initialized [ 0.451567] ACPI: bus type ATA registered [ 0.451752] libata version 3.00 loaded. [ 0.451854] ACPI: bus type USB registered [ 0.451977] usbcore: registered new interface driver usbfs [ 0.452074] usbcore: registered new interface driver hub [ 0.452183] usbcore: registered new device driver usb [ 0.452353] pps_core: LinuxPPS API ver. 1 registered [ 0.452423] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.452553] PTP clock support registered [ 0.452896] wmi: Mapper loaded [ 0.452997] Advanced Linux Sound Architecture Driver Initialized. [ 0.453068] PCI: Using ACPI for IRQ routing [ 0.459305] PCI: pci_cache_line_size set to 64 bytes [ 0.459311] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.459467] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.459469] e820: reserve RAM buffer [mem 0xbfda0000-0xbfffffff] [ 0.459471] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] [ 0.459628] NetLabel: Initializing [ 0.459700] NetLabel: domain hash size = 128 [ 0.459770] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.459847] NetLabel: unlabeled traffic allowed by default [ 0.460008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.460202] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.462329] Switched to clocksource hpet [ 0.464937] FS-Cache: Loaded [ 0.465054] pnp: PnP ACPI init [ 0.465129] ACPI: bus type PNP registered [ 0.465280] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.465358] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.465429] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.465502] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.489460] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.489590] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.489766] system 00:01: [io 0x0900-0x091f] has been reserved [ 0.489838] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.489910] system 00:01: [io 0x040b] has been reserved [ 0.489980] system 00:01: [io 0x04d6] has been reserved [ 0.490051] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.490123] system 00:01: [io 0x0c14] has been reserved [ 0.490196] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.490266] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.490337] system 00:01: [io 0x0c6f] has been reserved [ 0.490414] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.490485] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.490555] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.490626] system 00:01: [io 0x0800-0x08fe] could not be reserved [ 0.490696] system 00:01: [io 0x0a10-0x0a17] has been reserved [ 0.490767] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.490840] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.490910] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.490981] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.491091] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.491163] pnp 00:02: [dma 4] [ 0.491218] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.491305] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.491369] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.491413] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.491462] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.491739] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.491812] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.491881] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.491953] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.492043] pnp 00:0a: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.492154] pnp 00:0a: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.492264] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.492382] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.492493] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.492605] pnp 00:0a: disabling [mem 0x00100000-0xbfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.492784] system 00:0a: [mem 0xbfda0000-0xbfdfffff] could not be reserved [ 0.492855] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved [ 0.492926] system 00:0a: [mem 0xbfe00000-0xbfefffff] has been reserved [ 0.492998] system 00:0a: [mem 0xbff00000-0xbfffffff] could not be reserved [ 0.493068] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.493138] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.493211] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.493282] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.493296] pnp: PnP ACPI: found 11 devices [ 0.493365] ACPI: bus type PNP unregistered [ 0.501901] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref] [ 0.502011] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.502083] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.502155] pci 0000:00:02.0: bridge window [mem 0xfd500000-0xfd5fffff] [ 0.502227] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.502338] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.502416] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] [ 0.502488] pci 0000:00:04.0: bridge window [mem 0xfd400000-0xfd4fffff] [ 0.502560] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.502672] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.502742] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.502815] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.502888] pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.502999] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.503070] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.503142] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.503214] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.503325] pci 0000:00:14.4: PCI bridge to [bus 05] [ 0.503403] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.503477] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff] [ 0.503549] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref] [ 0.503662] pci 0000:00:15.0: PCI bridge to [bus 06] [ 0.503733] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff] [ 0.503807] pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.503879] pci 0000:00:15.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.504435] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.504436] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.504438] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.504439] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.504441] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.504442] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff] [ 0.504444] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.504445] pci_bus 0000:01: resource 1 [mem 0xfd500000-0xfd5fffff] [ 0.504446] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.504448] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.504449] pci_bus 0000:02: resource 1 [mem 0xfd400000-0xfd4fffff] [ 0.504451] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.504452] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.504453] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.504455] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.504456] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.504457] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.504459] pci_bus 0000:04: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.504460] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 0.504462] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.504463] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff pref] [ 0.504464] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.504466] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.504467] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.504468] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.504469] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.504471] pci_bus 0000:05: resource 9 [mem 0xc0000000-0xfebfffff] [ 0.504472] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff] [ 0.504473] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.504475] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.504494] NET: Registered protocol family 2 [ 0.504766] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.505253] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.505505] TCP: Hash tables configured (established 131072 bind 65536) [ 0.505600] TCP: reno registered [ 0.505684] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.505816] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.505986] NET: Registered protocol family 1 [ 0.506130] RPC: Registered named UNIX socket transport module. [ 0.506199] RPC: Registered udp transport module. [ 0.506269] RPC: Registered tcp transport module. [ 0.506338] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.763046] pci 0000:01:00.0: Boot video device [ 0.763144] PCI: CLS 64 bytes, default 64 [ 0.763191] PCI-DMA: Disabling AGP. [ 0.763350] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.763420] PCI-DMA: using GART IOMMU. [ 0.764732] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.768586] kvm: Nested Virtualization enabled [ 0.768661] kvm: Nested Paging enabled [ 0.769081] perf: AMD NB counters detected [ 0.769179] LVT offset 0 assigned for vector 0x400 [ 0.769271] perf: AMD IBS detected (0x000000ff) [ 0.770237] microcode: CPU0: patch_level=0x0600081c [ 0.770312] microcode: CPU1: patch_level=0x0600081c [ 0.770388] microcode: CPU2: patch_level=0x0600081c [ 0.770465] microcode: CPU3: patch_level=0x0600081c [ 0.770541] microcode: CPU4: patch_level=0x0600081c [ 0.770618] microcode: CPU5: patch_level=0x0600081c [ 0.770693] microcode: CPU6: patch_level=0x0600081c [ 0.770780] microcode: CPU7: patch_level=0x0600081c [ 0.770903] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.771013] Scanning for low memory corruption every 60 seconds [ 0.771767] audit: initializing netlink socket (disabled) [ 0.771852] type=2000 audit(1378395208.592:1): initialized [ 0.789146] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.792093] VFS: Disk quotas dquot_6.5.2 [ 0.792219] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.793326] NFS: Registering the id_resolver key type [ 0.793402] Key type id_resolver registered [ 0.793472] Key type id_legacy registered [ 0.793700] Key type cifs.idmap registered [ 0.793779] NTFS driver 2.1.30 [Flags: R/W]. [ 0.793992] fuse init (API version 7.22) [ 0.794457] bio: create slab at 1 [ 0.794705] Btrfs loaded, integrity-checker=on [ 0.794785] btrfs: selftest: Running btrfs free space cache tests [ 0.794856] btrfs: selftest: Running extent only tests [ 0.794929] btrfs: selftest: Running bitmap only tests [ 0.795004] btrfs: selftest: Running bitmap and extent tests [ 0.795078] btrfs: selftest: Free space cache tests finished [ 0.795151] msgmni has been set to 32054 [ 0.795303] SELinux: Registering netfilter hooks [ 0.795806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.795916] io scheduler noop registered [ 0.795986] io scheduler deadline registered [ 0.796102] io scheduler cfq registered (default) [ 0.796429] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.796663] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.796785] ACPI: Power Button [PWRB] [ 0.796910] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.797021] ACPI: Power Button [PWRF] [ 0.797221] ACPI: acpi_idle registered with cpuidle [ 0.797702] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.818315] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.818999] Non-volatile memory driver v1.3 [ 0.819106] [drm] Initialized drm 1.1.0 20060810 [ 0.819210] [drm] radeon kernel modesetting enabled. [ 0.819485] [drm] initializing kernel modesetting (BONAIRE 0x1002:0x665C 0x1043:0x045A). [ 0.819607] [drm] register mmio base: 0xFD580000 [ 0.819675] [drm] register mmio size: 262144 [ 0.819909] [drm] doorbell mmio base: 0xDF800000 [ 0.819978] [drm] doorbell mmio size: 4194304 [ 0.820411] ATOM BIOS: 665C.15.32.0.1.AS06 [ 0.820540] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 0.820651] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 0.820760] [drm] Detected VRAM RAM=1024M, BAR=256M [ 0.820839] [drm] RAM width 128bits DDR [ 0.820942] [TTM] Zone kernel: Available graphics memory: 8205964 kiB [ 0.821013] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 0.821082] [TTM] Initializing pool allocator [ 0.821152] [TTM] Initializing DMA pool allocator [ 0.821239] [drm] radeon: 1024M of VRAM memory ready [ 0.821310] [drm] radeon: 512M of GTT memory ready. [ 0.821479] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 0.833456] [drm] Loading BONAIRE Microcode [ 0.834410] [drm] PCIE GART of 512M enabled (table at 0x0000000000277000). [ 0.834564] radeon 0000:01:00.0: WB enabled [ 0.834642] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88042b991c00 [ 0.834752] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88042b991c04 [ 0.834872] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88042b991c08 [ 0.834981] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88042b991c0c [ 0.835092] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88042b991c10 [ 0.835585] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90012236c98 [ 0.835696] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.835766] [drm] Driver supports precise vblank timestamp query. [ 0.835860] radeon 0000:01:00.0: irq 40 for MSI/MSI-X [ 0.835869] radeon 0000:01:00.0: radeon: using MSI. [ 0.835959] [drm] radeon: irq initialized. [ 0.853010] [drm] ring test on 0 succeeded in 3 usecs [ 0.853149] [drm] ring test on 1 succeeded in 3 usecs [ 0.853230] [drm] ring test on 2 succeeded in 2 usecs [ 0.853445] [drm] ring test on 3 succeeded in 2 usecs [ 0.853522] [drm] ring test on 4 succeeded in 1 usecs [ 0.909707] [drm] ring test on 5 succeeded in 1 usecs [ 0.909779] [drm] UVD initialized successfully. [ 0.930715] [drm] ib test on ring 0 succeeded in 0 usecs [ 0.930922] [drm] ib test on ring 1 succeeded in 0 usecs [ 0.931136] [drm] ib test on ring 2 succeeded in 0 usecs [ 0.931344] [drm] ib test on ring 3 succeeded in 0 usecs [ 0.931554] [drm] ib test on ring 4 succeeded in 0 usecs [ 0.961145] [drm] ib test on ring 5 succeeded [ 0.982170] [drm] Radeon Display Connectors [ 0.982240] [drm] Connector 0: [ 0.982310] [drm] DP-1 [ 0.982379] [drm] HPD2 [ 0.982450] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 0.982558] [drm] Encoders: [ 0.982628] [drm] DFP1: INTERNAL_UNIPHY2 [ 0.982698] [drm] Connector 1: [ 0.982767] [drm] HDMI-A-1 [ 0.982836] [drm] HPD3 [ 0.982905] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 0.983027] [drm] Encoders: [ 0.983097] [drm] DFP2: INTERNAL_UNIPHY2 [ 0.983167] [drm] Connector 2: [ 0.983236] [drm] DVI-D-1 [ 0.983306] [drm] HPD1 [ 0.983375] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 0.983485] [drm] Encoders: [ 0.983554] [drm] DFP3: INTERNAL_UNIPHY1 [ 0.983623] [drm] Connector 3: [ 0.983692] [drm] DVI-I-1 [ 0.983761] [drm] HPD6 [ 0.983830] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 0.983939] [drm] Encoders: [ 0.984007] [drm] DFP4: INTERNAL_UNIPHY [ 0.984086] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 0.984251] [drm] Internal thermal controller with fan control [ 0.984326] [drm] radeon: power management initialized [ 1.023303] [drm] fb mappable at 0xC1388000 [ 1.023373] [drm] vram apper at 0xC0000000 [ 1.023442] [drm] size 5324800 [ 1.023513] [drm] fb depth is 24 [ 1.023582] [drm] pitch is 5888 [ 1.023732] fbcon: radeondrmfb (fb0) is primary device [ 1.033088] Console: switching to colour frame buffer device 180x56 [ 1.035347] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 1.035366] radeon 0000:01:00.0: registered panic notifier [ 1.035384] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0 [ 1.036427] loop: module loaded [ 1.036652] ahci 0000:00:11.0: version 3.0 [ 1.036828] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.036853] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.037537] scsi0 : ahci [ 1.037657] scsi1 : ahci [ 1.037769] scsi2 : ahci [ 1.037879] scsi3 : ahci [ 1.037979] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19 [ 1.038001] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19 [ 1.038023] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19 [ 1.038045] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19 [ 1.038786] scsi4 : pata_atiixp [ 1.039073] scsi5 : pata_atiixp [ 1.039334] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.039355] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.039552] tun: Universal TUN/TAP device driver, 1.6 [ 1.039567] tun: (C) 1999-2004 Max Krasnyansky [ 1.039680] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.039698] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.039756] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.039776] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.039834] sky2: driver version 1.30 [ 1.039967] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.039988] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.040178] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 1.040355] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90001870000, 90:2b:34:a8:3f:a3, XID 0c900800 IRQ 41 [ 1.040385] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.040586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.041208] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 1.041210] ehci-pci: EHCI PCI platform driver [ 1.041928] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.042620] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.043264] QUIRK: Enable AMD PLL fix [ 1.043266] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.043921] ehci-pci 0000:00:12.2: debug port 1 [ 1.044563] ehci-pci 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 [ 1.044566] ehci-pci 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.044578] ehci-pci 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.044584] ehci-pci 0000:00:12.2: MWI active [ 1.044585] ehci-pci 0000:00:12.2: supports USB remote wakeup [ 1.044596] ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000 [ 1.045232] ehci-pci 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.051156] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.051810] usb usb1: default language 0x0409 [ 1.051815] usb usb1: udev 1, busnum 1, minor = 0 [ 1.051816] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.052463] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.053118] usb usb1: Product: EHCI Host Controller [ 1.053767] usb usb1: Manufacturer: Linux 3.11.0 ehci_hcd [ 1.054427] usb usb1: SerialNumber: 0000:00:12.2 [ 1.055173] usb usb1: usb_probe_device [ 1.055176] usb usb1: configuration #1 chosen from 1 choice [ 1.055181] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.055221] hub 1-0:1.0: usb_probe_interface [ 1.055223] hub 1-0:1.0: usb_probe_interface - got id [ 1.055225] hub 1-0:1.0: USB hub found [ 1.055865] hub 1-0:1.0: 5 ports detected [ 1.056508] hub 1-0:1.0: standalone hub [ 1.056509] hub 1-0:1.0: no power switching (usb 1.0) [ 1.056510] hub 1-0:1.0: individual port over-current protection [ 1.056512] hub 1-0:1.0: power on to power good time: 20ms [ 1.056515] hub 1-0:1.0: local power source is good [ 1.056544] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.056685] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.057396] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.058053] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.058728] ehci-pci 0000:00:13.2: debug port 1 [ 1.059390] ehci-pci 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 [ 1.059392] ehci-pci 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.059404] ehci-pci 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.059410] ehci-pci 0000:00:13.2: MWI active [ 1.059411] ehci-pci 0000:00:13.2: supports USB remote wakeup [ 1.059414] ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000 [ 1.060072] ehci-pci 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.065172] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.065848] usb usb2: default language 0x0409 [ 1.065852] usb usb2: udev 1, busnum 2, minor = 128 [ 1.065854] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.066527] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.067207] usb usb2: Product: EHCI Host Controller [ 1.067886] usb usb2: Manufacturer: Linux 3.11.0 ehci_hcd [ 1.068569] usb usb2: SerialNumber: 0000:00:13.2 [ 1.069330] usb usb2: usb_probe_device [ 1.069332] usb usb2: configuration #1 chosen from 1 choice [ 1.069336] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.069375] hub 2-0:1.0: usb_probe_interface [ 1.069376] hub 2-0:1.0: usb_probe_interface - got id [ 1.069378] hub 2-0:1.0: USB hub found [ 1.070047] hub 2-0:1.0: 5 ports detected [ 1.070714] hub 2-0:1.0: standalone hub [ 1.070715] hub 2-0:1.0: no power switching (usb 1.0) [ 1.070716] hub 2-0:1.0: individual port over-current protection [ 1.070717] hub 2-0:1.0: power on to power good time: 20ms [ 1.070720] hub 2-0:1.0: local power source is good [ 1.070747] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.070887] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.071625] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.072293] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.072960] ehci-pci 0000:00:16.2: debug port 1 [ 1.073619] ehci-pci 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4 [ 1.073622] ehci-pci 0000:00:16.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.073633] ehci-pci 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.073639] ehci-pci 0000:00:16.2: MWI active [ 1.073640] ehci-pci 0000:00:16.2: supports USB remote wakeup [ 1.073643] ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000 [ 1.074296] ehci-pci 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.080192] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.080860] usb usb3: default language 0x0409 [ 1.080863] usb usb3: udev 1, busnum 3, minor = 256 [ 1.080865] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.081535] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.082216] usb usb3: Product: EHCI Host Controller [ 1.082884] usb usb3: Manufacturer: Linux 3.11.0 ehci_hcd [ 1.083563] usb usb3: SerialNumber: 0000:00:16.2 [ 1.084337] usb usb3: usb_probe_device [ 1.084339] usb usb3: configuration #1 chosen from 1 choice [ 1.084342] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.084382] hub 3-0:1.0: usb_probe_interface [ 1.084383] hub 3-0:1.0: usb_probe_interface - got id [ 1.084385] hub 3-0:1.0: USB hub found [ 1.085071] hub 3-0:1.0: 4 ports detected [ 1.085751] hub 3-0:1.0: standalone hub [ 1.085752] hub 3-0:1.0: no power switching (usb 1.0) [ 1.085753] hub 3-0:1.0: individual port over-current protection [ 1.085755] hub 3-0:1.0: power on to power good time: 20ms [ 1.085757] hub 3-0:1.0: local power source is good [ 1.085780] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.085858] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.086553] ohci_hcd: block sizes: ed 80 td 96 [ 1.086556] ohci-pci: OHCI PCI platform driver [ 1.087350] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.088115] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.088819] ohci-pci 0000:00:12.0: enabled AMD prefetch quirk [ 1.088828] ohci-pci 0000:00:12.0: created debug files [ 1.088829] ohci-pci 0000:00:12.0: supports USB remote wakeup [ 1.088839] ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000 [ 1.144292] ohci-pci 0000:00:12.0: OHCI controller state [ 1.144296] ohci-pci 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.144298] ohci-pci 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.144301] ohci-pci 0000:00:12.0: cmdstatus 0x00000 SOC=0 [ 1.144304] ohci-pci 0000:00:12.0: intrstatus 0x00000004 SF [ 1.144306] ohci-pci 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.144313] ohci-pci 0000:00:12.0: hcca frame #0005 [ 1.144316] ohci-pci 0000:00:12.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5) [ 1.144318] ohci-pci 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.144321] ohci-pci 0000:00:12.0: roothub.status 00008000 DRWE [ 1.144323] ohci-pci 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS [ 1.144326] ohci-pci 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS [ 1.144328] ohci-pci 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS [ 1.144331] ohci-pci 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS [ 1.144333] ohci-pci 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS [ 1.144339] usb usb4: default language 0x0409 [ 1.144343] usb usb4: udev 1, busnum 4, minor = 384 [ 1.144345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.145046] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.145748] usb usb4: Product: OHCI PCI host controller [ 1.146443] usb usb4: Manufacturer: Linux 3.11.0 ohci_hcd [ 1.147129] usb usb4: SerialNumber: 0000:00:12.0 [ 1.147906] usb usb4: usb_probe_device [ 1.147908] usb usb4: configuration #1 chosen from 1 choice [ 1.147913] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.147953] hub 4-0:1.0: usb_probe_interface [ 1.147954] hub 4-0:1.0: usb_probe_interface - got id [ 1.147956] hub 4-0:1.0: USB hub found [ 1.148642] hub 4-0:1.0: 5 ports detected [ 1.149312] hub 4-0:1.0: standalone hub [ 1.149314] hub 4-0:1.0: no power switching (usb 1.0) [ 1.149315] hub 4-0:1.0: global over-current protection [ 1.149316] hub 4-0:1.0: power on to power good time: 4ms [ 1.149319] hub 4-0:1.0: local power source is good [ 1.149321] hub 4-0:1.0: no over-current condition exists [ 1.149348] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.149377] ohci-pci 0000:00:12.0: FS/LS companion for 0000:00:12.2 [ 1.149484] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.150217] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.150883] ohci-pci 0000:00:13.0: enabled AMD prefetch quirk [ 1.150896] ohci-pci 0000:00:13.0: created debug files [ 1.150898] ohci-pci 0000:00:13.0: supports USB remote wakeup [ 1.150901] ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000 [ 1.156307] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.156338] hub 1-0:1.0: hub_suspend [ 1.156342] usb usb1: bus auto-suspend, wakeup 1 [ 1.156343] ehci-pci 0000:00:12.2: suspend root hub [ 1.170320] ehci-pci 0000:00:13.2: GetStatus port:4 status 001403 0 ACK POWER sig=k CSC CONNECT [ 1.170322] hub 2-0:1.0: port 4: status 0501 change 0001 [ 1.170328] ehci-pci 0000:00:13.2: GetStatus port:5 status 001403 0 ACK POWER sig=k CSC CONNECT [ 1.170330] hub 2-0:1.0: port 5: status 0501 change 0001 [ 1.185344] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 1.185349] hub 3-0:1.0: hub_suspend [ 1.185351] usb usb3: bus auto-suspend, wakeup 1 [ 1.185352] ehci-pci 0000:00:16.2: suspend root hub [ 1.206338] ohci-pci 0000:00:13.0: OHCI controller state [ 1.206341] ohci-pci 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.206344] ohci-pci 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.206346] ohci-pci 0000:00:13.0: cmdstatus 0x00000 SOC=0 [ 1.206349] ohci-pci 0000:00:13.0: intrstatus 0x00000004 SF [ 1.206351] ohci-pci 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.206359] ohci-pci 0000:00:13.0: hcca frame #0005 [ 1.206361] ohci-pci 0000:00:13.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5) [ 1.206364] ohci-pci 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.206366] ohci-pci 0000:00:13.0: roothub.status 00008000 DRWE [ 1.206368] ohci-pci 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS [ 1.206371] ohci-pci 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS [ 1.206373] ohci-pci 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS [ 1.206376] ohci-pci 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS [ 1.206378] ohci-pci 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS [ 1.206384] usb usb5: default language 0x0409 [ 1.206388] usb usb5: udev 1, busnum 5, minor = 512 [ 1.206389] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.207047] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.207708] usb usb5: Product: OHCI PCI host controller [ 1.208366] usb usb5: Manufacturer: Linux 3.11.0 ohci_hcd [ 1.209014] usb usb5: SerialNumber: 0000:00:13.0 [ 1.209752] usb usb5: usb_probe_device [ 1.209754] usb usb5: configuration #1 chosen from 1 choice [ 1.209758] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.209798] hub 5-0:1.0: usb_probe_interface [ 1.209800] hub 5-0:1.0: usb_probe_interface - got id [ 1.209801] hub 5-0:1.0: USB hub found [ 1.210453] hub 5-0:1.0: 5 ports detected [ 1.211090] hub 5-0:1.0: standalone hub [ 1.211091] hub 5-0:1.0: no power switching (usb 1.0) [ 1.211092] hub 5-0:1.0: global over-current protection [ 1.211093] hub 5-0:1.0: power on to power good time: 4ms [ 1.211097] hub 5-0:1.0: local power source is good [ 1.211098] hub 5-0:1.0: no over-current condition exists [ 1.211128] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.211160] ohci-pci 0000:00:13.0: FS/LS companion for 0000:00:13.2 [ 1.211269] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.211985] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.212638] ohci-pci 0000:00:14.5: enabled AMD prefetch quirk [ 1.212647] ohci-pci 0000:00:14.5: created debug files [ 1.212648] ohci-pci 0000:00:14.5: supports USB remote wakeup [ 1.212652] ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000 [ 1.249431] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.249436] hub 4-0:1.0: hub_suspend [ 1.249439] usb usb4: bus auto-suspend, wakeup 1 [ 1.249442] ohci-pci 0000:00:12.0: suspend root hub [ 1.267453] ohci-pci 0000:00:14.5: OHCI controller state [ 1.267456] ohci-pci 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running [ 1.267459] ohci-pci 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3 [ 1.267461] ohci-pci 0000:00:14.5: cmdstatus 0x00000 SOC=0 [ 1.267463] ohci-pci 0000:00:14.5: intrstatus 0x00000004 SF [ 1.267466] ohci-pci 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.267473] ohci-pci 0000:00:14.5: hcca frame #0005 [ 1.267475] ohci-pci 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2) [ 1.267478] ohci-pci 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.267480] ohci-pci 0000:00:14.5: roothub.status 00008000 DRWE [ 1.267482] ohci-pci 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS [ 1.267485] ohci-pci 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS [ 1.267491] usb usb6: default language 0x0409 [ 1.267495] usb usb6: udev 1, busnum 6, minor = 640 [ 1.267496] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.268148] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.268804] usb usb6: Product: OHCI PCI host controller [ 1.269459] usb usb6: Manufacturer: Linux 3.11.0 ohci_hcd [ 1.270114] usb usb6: SerialNumber: 0000:00:14.5 [ 1.270779] hub 2-0:1.0: state 7 ports 5 chg 0030 evt 0000 [ 1.270789] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 1.270797] ehci-pci 0000:00:13.2: port 4 low speed --> companion [ 1.270887] usb usb6: usb_probe_device [ 1.270888] usb usb6: configuration #1 chosen from 1 choice [ 1.270892] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.270929] hub 6-0:1.0: usb_probe_interface [ 1.270930] hub 6-0:1.0: usb_probe_interface - got id [ 1.270932] hub 6-0:1.0: USB hub found [ 1.271590] hub 6-0:1.0: 2 ports detected [ 1.272227] hub 6-0:1.0: standalone hub [ 1.272228] hub 6-0:1.0: no power switching (usb 1.0) [ 1.272229] hub 6-0:1.0: global over-current protection [ 1.272231] hub 6-0:1.0: power on to power good time: 4ms [ 1.272234] hub 6-0:1.0: local power source is good [ 1.272235] hub 6-0:1.0: no over-current condition exists [ 1.272247] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.272378] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.273090] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.273744] ohci-pci 0000:00:16.0: enabled AMD prefetch quirk [ 1.273754] ohci-pci 0000:00:16.0: created debug files [ 1.273755] ohci-pci 0000:00:16.0: supports USB remote wakeup [ 1.273759] ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000 [ 1.310505] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [3] = 0x00010301 CSC LSDA PPS CCS [ 1.310507] hub 5-0:1.0: port 4: status 0301 change 0001 [ 1.321516] ehci-pci 0000:00:13.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.321531] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 1.321535] ehci-pci 0000:00:13.2: port 5 low speed --> companion [ 1.329538] ohci-pci 0000:00:16.0: OHCI controller state [ 1.329541] ohci-pci 0000:00:16.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.329544] ohci-pci 0000:00:16.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.329546] ohci-pci 0000:00:16.0: cmdstatus 0x00000 SOC=0 [ 1.329549] ohci-pci 0000:00:16.0: intrstatus 0x00000004 SF [ 1.329551] ohci-pci 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.329558] ohci-pci 0000:00:16.0: hcca frame #0005 [ 1.329561] ohci-pci 0000:00:16.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) [ 1.329563] ohci-pci 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.329565] ohci-pci 0000:00:16.0: roothub.status 00008000 DRWE [ 1.329568] ohci-pci 0000:00:16.0: roothub.portstatus [0] 0x00000100 PPS [ 1.329570] ohci-pci 0000:00:16.0: roothub.portstatus [1] 0x00000100 PPS [ 1.329573] ohci-pci 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS [ 1.329575] ohci-pci 0000:00:16.0: roothub.portstatus [3] 0x00000100 PPS [ 1.329581] usb usb7: default language 0x0409 [ 1.329585] usb usb7: udev 1, busnum 7, minor = 768 [ 1.329587] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.330242] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.330898] usb usb7: Product: OHCI PCI host controller [ 1.331549] usb usb7: Manufacturer: Linux 3.11.0 ohci_hcd [ 1.332197] usb usb7: SerialNumber: 0000:00:16.0 [ 1.332934] usb usb7: usb_probe_device [ 1.332936] usb usb7: configuration #1 chosen from 1 choice [ 1.332940] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.332977] hub 7-0:1.0: usb_probe_interface [ 1.332979] hub 7-0:1.0: usb_probe_interface - got id [ 1.332980] hub 7-0:1.0: USB hub found [ 1.333630] hub 7-0:1.0: 4 ports detected [ 1.334273] hub 7-0:1.0: standalone hub [ 1.334274] hub 7-0:1.0: no power switching (usb 1.0) [ 1.334275] hub 7-0:1.0: global over-current protection [ 1.334276] hub 7-0:1.0: power on to power good time: 4ms [ 1.334280] hub 7-0:1.0: local power source is good [ 1.334281] hub 7-0:1.0: no over-current condition exists [ 1.334303] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.334332] ohci-pci 0000:00:16.0: FS/LS companion for 0000:00:16.2 [ 1.334382] uhci_hcd: USB Universal Host Controller Interface driver [ 1.335133] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.335840] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 1.336561] xhci_hcd 0000:02:00.0: supports USB remote wakeup [ 1.336578] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X [ 1.336612] usb usb8: default language 0x0409 [ 1.336616] usb usb8: udev 1, busnum 8, minor = 896 [ 1.336617] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.337271] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.337933] usb usb8: Product: xHCI Host Controller [ 1.338595] usb usb8: Manufacturer: Linux 3.11.0 xhci_hcd [ 1.339248] usb usb8: SerialNumber: 0000:02:00.0 [ 1.339984] usb usb8: usb_probe_device [ 1.339986] usb usb8: configuration #1 chosen from 1 choice [ 1.339988] xHCI xhci_add_endpoint called for root hub [ 1.339989] xHCI xhci_check_bandwidth called for root hub [ 1.339992] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 1.340029] hub 8-0:1.0: usb_probe_interface [ 1.340031] hub 8-0:1.0: usb_probe_interface - got id [ 1.340032] hub 8-0:1.0: USB hub found [ 1.340684] hub 8-0:1.0: 2 ports detected [ 1.341322] hub 8-0:1.0: standalone hub [ 1.341324] hub 8-0:1.0: no power switching (usb 1.0) [ 1.341325] hub 8-0:1.0: individual port over-current protection [ 1.341326] hub 8-0:1.0: Single TT [ 1.341327] hub 8-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.341328] hub 8-0:1.0: power on to power good time: 20ms [ 1.341331] hub 8-0:1.0: local power source is good [ 1.341343] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 1.341372] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.342083] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 1.342741] xhci_hcd 0000:02:00.0: supports USB remote wakeup [ 1.342751] usb usb9: skipped 1 descriptor after endpoint [ 1.342753] usb usb9: default language 0x0409 [ 1.342757] usb usb9: udev 1, busnum 9, minor = 1024 [ 1.342758] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.343419] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.343544] ata1: SATA link down (SStatus 0 SControl 300) [ 1.343566] ata4: SATA link down (SStatus 0 SControl 300) [ 1.345388] usb usb9: Product: xHCI Host Controller [ 1.346039] usb usb9: Manufacturer: Linux 3.11.0 xhci_hcd [ 1.346691] usb usb9: SerialNumber: 0000:02:00.0 [ 1.347411] usb usb9: usb_probe_device [ 1.347412] usb usb9: configuration #1 chosen from 1 choice [ 1.347414] xHCI xhci_add_endpoint called for root hub [ 1.347415] xHCI xhci_check_bandwidth called for root hub [ 1.347417] usb usb9: adding 9-0:1.0 (config #1, interface 0) [ 1.347454] hub 9-0:1.0: usb_probe_interface [ 1.347455] hub 9-0:1.0: usb_probe_interface - got id [ 1.347457] hub 9-0:1.0: USB hub found [ 1.348103] hub 9-0:1.0: 2 ports detected [ 1.348734] hub 9-0:1.0: standalone hub [ 1.348735] hub 9-0:1.0: no power switching (usb 1.0) [ 1.348736] hub 9-0:1.0: individual port over-current protection [ 1.348737] hub 9-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.348738] hub 9-0:1.0: power on to power good time: 20ms [ 1.348741] hub 9-0:1.0: local power source is good [ 1.348752] hub 9-0:1.0: trying to enable port power on non-switchable hub [ 1.354588] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.355302] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10 [ 1.356013] xhci_hcd 0000:04:00.0: supports USB remote wakeup [ 1.356030] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 1.356063] usb usb10: default language 0x0409 [ 1.356067] usb usb10: udev 1, busnum 10, minor = 1152 [ 1.356069] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.356714] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.357359] usb usb10: Product: xHCI Host Controller [ 1.358004] usb usb10: Manufacturer: Linux 3.11.0 xhci_hcd [ 1.358648] usb usb10: SerialNumber: 0000:04:00.0 [ 1.359367] usb usb10: usb_probe_device [ 1.359368] usb usb10: configuration #1 chosen from 1 choice [ 1.359370] xHCI xhci_add_endpoint called for root hub [ 1.359371] xHCI xhci_check_bandwidth called for root hub [ 1.359374] usb usb10: adding 10-0:1.0 (config #1, interface 0) [ 1.359412] hub 10-0:1.0: usb_probe_interface [ 1.359413] hub 10-0:1.0: usb_probe_interface - got id [ 1.359415] hub 10-0:1.0: USB hub found [ 1.360055] hub 10-0:1.0: 2 ports detected [ 1.360682] hub 10-0:1.0: standalone hub [ 1.360683] hub 10-0:1.0: no power switching (usb 1.0) [ 1.360685] hub 10-0:1.0: individual port over-current protection [ 1.360686] hub 10-0:1.0: Single TT [ 1.360687] hub 10-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.360688] hub 10-0:1.0: power on to power good time: 20ms [ 1.360691] hub 10-0:1.0: local power source is good [ 1.360703] hub 10-0:1.0: trying to enable port power on non-switchable hub [ 1.360732] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.361430] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11 [ 1.362074] xhci_hcd 0000:04:00.0: supports USB remote wakeup [ 1.362083] usb usb11: skipped 1 descriptor after endpoint [ 1.362085] usb usb11: default language 0x0409 [ 1.362089] usb usb11: udev 1, busnum 11, minor = 1280 [ 1.362090] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.362729] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.363375] usb usb11: Product: xHCI Host Controller [ 1.364029] usb usb11: Manufacturer: Linux 3.11.0 xhci_hcd [ 1.364680] usb usb11: SerialNumber: 0000:04:00.0 [ 1.365404] usb usb11: usb_probe_device [ 1.365405] usb usb11: configuration #1 chosen from 1 choice [ 1.365407] xHCI xhci_add_endpoint called for root hub [ 1.365408] xHCI xhci_check_bandwidth called for root hub [ 1.365411] usb usb11: adding 11-0:1.0 (config #1, interface 0) [ 1.365447] hub 11-0:1.0: usb_probe_interface [ 1.365449] hub 11-0:1.0: usb_probe_interface - got id [ 1.365450] hub 11-0:1.0: USB hub found [ 1.366102] hub 11-0:1.0: 2 ports detected [ 1.366735] hub 11-0:1.0: standalone hub [ 1.366736] hub 11-0:1.0: no power switching (usb 1.0) [ 1.366737] hub 11-0:1.0: individual port over-current protection [ 1.366739] hub 11-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.366740] hub 11-0:1.0: power on to power good time: 20ms [ 1.366742] hub 11-0:1.0: local power source is good [ 1.366755] hub 11-0:1.0: trying to enable port power on non-switchable hub [ 1.372584] ehci-pci 0000:00:13.2: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.372604] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0030 [ 1.372608] ehci-pci 0000:00:13.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.372612] hub 2-0:1.0: port 4, status 0100, change 0001, 12 Mb/s [ 1.372667] usbcore: registered new interface driver usblp [ 1.373376] usbcore: registered new interface driver usb-storage [ 1.374101] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.374739] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.375551] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.376333] mousedev: PS/2 mouse device common for all mice [ 1.377233] rtc_cmos 00:04: RTC can wake from S4 [ 1.378016] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.378700] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.379418] i2c /dev entries driver [ 1.380720] cpuidle: using governor ladder [ 1.381481] cpuidle: using governor menu [ 1.382255] hidraw: raw HID events driver (C) Jiri Kosina [ 1.383705] usbcore: registered new interface driver usbhid [ 1.384361] usbhid: USB HID core driver [ 1.398658] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.406512] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X [ 1.411023] Netfilter messages via NETLINK v0.30. [ 1.411724] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.412604] ctnetlink v0.93: registering with nfnetlink. [ 1.413351] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.414038] TCP: cubic registered [ 1.414662] Initializing XFRM netlink socket [ 1.415635] NET: Registered protocol family 10 [ 1.416597] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.417293] sit: IPv6 over IPv4 tunneling driver [ 1.418140] NET: Registered protocol family 17 [ 1.418831] Key type dns_resolver registered [ 1.420532] PM: Hibernation image not present or could not be loaded. [ 1.420540] registered taskstats version 1 [ 1.421540] Magic number: 13:14:588 [ 1.422230] console [netcon0] enabled [ 1.422882] netconsole: network logging started [ 1.423542] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.424747] ALSA device list: [ 1.425407] #0: HDA ATI SB at 0xfdff4000 irq 16 [ 1.426051] #1: HD-Audio Generic at 0xfd5fc000 irq 44 [ 1.476820] hub 2-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100 [ 1.476833] ehci-pci 0000:00:13.2: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.476842] hub 2-0:1.0: port 5, status 0100, change 0001, 12 Mb/s [ 1.498852] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.501335] ata2.00: ATA-8: ST2000DM001-9YN164, CC4H, max UDMA/133 [ 1.502452] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.504226] ata2.00: configured for UDMA/133 [ 1.506383] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4H PQ: 0 ANSI: 5 [ 1.508818] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.508935] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.512516] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.514420] sd 1:0:0:0: [sda] Write Protect is off [ 1.516264] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.516291] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.552793] sda: sda1 sda2 < sda5 > sda3 sda4 [ 1.555734] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.580958] hub 2-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100 [ 1.580972] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.580979] hub 5-0:1.0: state 7 ports 5 chg 0010 evt 0020 [ 1.580988] hub 5-0:1.0: port 4, status 0301, change 0000, 1.5 Mb/s [ 1.581007] hub 2-0:1.0: hub_suspend [ 1.581014] usb usb2: bus auto-suspend, wakeup 1 [ 1.581017] ehci-pci 0000:00:13.2: suspend root hub [ 1.581703] hub 6-0:1.0: hub_suspend [ 1.581707] usb usb6: bus auto-suspend, wakeup 1 [ 1.581712] ohci-pci 0000:00:14.5: suspend root hub [ 1.602005] ohci-pci 0000:00:13.0: port[3] reset timeout, stat 00000311 [ 1.653053] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [3] = 0x00100303 PRSC LSDA PPS PES CCS [ 1.704121] usb 5-4: new low-speed USB device number 2 using ohci-pci [ 1.728173] ohci-pci 0000:00:13.0: port[3] reset timeout, stat 00000313 [ 1.754191] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.757949] ata3.00: ATAPI: HL-DT-STDVD-RAM GSA-H55L, 1.06, max UDMA/66 [ 1.762115] ata3.00: configured for UDMA/66 [ 1.767702] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55L 1.06 PQ: 0 ANSI: 5 [ 1.772161] tsc: Refined TSC clocksource calibration: 3523.556 MHz [ 1.772652] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.772654] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.773101] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.773340] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.779160] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [3] = 0x00100303 PRSC LSDA PPS PES CCS [ 1.785597] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240) [ 1.788151] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities [ 1.791639] EXT4-fs (sda3): INFO: recovery required on readonly filesystem [ 1.793640] EXT4-fs (sda3): write access will be enabled during recovery [ 1.848290] usb 5-4: skipped 1 descriptor after interface [ 1.850292] usb 5-4: default language 0x0409 [ 1.854299] usb 5-4: udev 2, busnum 5, minor = 513 [ 1.854306] usb 5-4: New USB device found, idVendor=093a, idProduct=2510 [ 1.856330] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.858334] usb 5-4: Product: USB OPTICAL MOUSE [ 1.860322] usb 5-4: Manufacturer: PIXART [ 1.862619] usb 5-4: usb_probe_device [ 1.862625] usb 5-4: configuration #1 chosen from 1 choice [ 1.866345] usb 5-4: adding 5-4:1.0 (config #1, interface 0) [ 1.866496] usbhid 5-4:1.0: usb_probe_interface [ 1.866501] usbhid 5-4:1.0: usb_probe_interface - got id [ 1.871863] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb5/5-4/5-4:1.0/input/input3 [ 1.874510] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-4/input0 [ 1.876683] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [4] = 0x00010301 CSC LSDA PPS CCS [ 1.876691] hub 5-0:1.0: port 5, status 0301, change 0001, 1.5 Mb/s [ 1.980488] hub 5-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x301 [ 2.001534] ohci-pci 0000:00:13.0: port[4] reset timeout, stat 00000311 [ 2.052570] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [4] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.061054] EXT4-fs (sda3): recovery complete [ 2.066620] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.068799] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 2.072966] Freeing unused kernel memory: 968K (ffffffff81ecd000 - ffffffff81fbf000) [ 2.075145] Write protecting the kernel read-only data: 14336k [ 2.079554] Freeing unused kernel memory: 920K (ffff88000191a000 - ffff880001a00000) [ 2.081344] Freeing unused kernel memory: 440K (ffff880001d92000 - ffff880001e00000) [ 2.103649] usb 5-5: new low-speed USB device number 3 using ohci-pci [ 2.126699] ohci-pci 0000:00:13.0: port[4] reset timeout, stat 00000313 [ 2.177639] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [4] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.248801] usb 5-5: skipped 1 descriptor after interface [ 2.250756] usb 5-5: default language 0x0409 [ 2.255830] usb 5-5: udev 3, busnum 5, minor = 514 [ 2.255837] usb 5-5: New USB device found, idVendor=145f, idProduct=011a [ 2.257975] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.260096] usb 5-5: Product: GM-4200 Gamer Optical Mouse [ 2.262233] usb 5-5: Manufacturer: Trust [ 2.264747] usb 5-5: usb_probe_device [ 2.264754] usb 5-5: configuration #1 chosen from 1 choice [ 2.265799] usb 5-5: adding 5-5:1.0 (config #1, interface 0) [ 2.265992] usbhid 5-5:1.0: usb_probe_interface [ 2.265997] usbhid 5-5:1.0: usb_probe_interface - got id [ 2.271325] input: Trust GM-4200 Gamer Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/input/input4 [ 2.274069] hid-generic 0003:145F:011A.0002: input,hidraw1: USB HID v1.11 Mouse [Trust GM-4200 Gamer Optical Mouse] on usb-0000:00:13.0-5/input0 [ 2.276695] hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 2.276704] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.276711] hub 7-0:1.0: hub_suspend [ 2.276718] usb usb7: bus auto-suspend, wakeup 1 [ 2.276732] ohci-pci 0000:00:16.0: suspend root hub [ 2.276762] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.276768] hub 8-0:1.0: hub_suspend [ 2.276772] usb usb8: bus auto-suspend, wakeup 1 [ 2.276790] hub 10-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.276807] hub 9-0:1.0: hub_suspend [ 2.276812] usb usb9: bus auto-suspend, wakeup 1 [ 2.276826] hub 11-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.276831] hub 10-0:1.0: hub_suspend [ 2.276836] usb usb10: bus auto-suspend, wakeup 1 [ 2.276852] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0020 [ 2.276867] hub 11-0:1.0: hub_suspend [ 2.276872] usb usb11: bus auto-suspend, wakeup 1 [ 2.730514] cat (1161) used greatest stack depth: 4824 bytes left [ 2.780693] Switched to clocksource tsc [ 2.864895] loadkeys (1166) used greatest stack depth: 4776 bytes left [ 2.867680] init-early.sh (1160) used greatest stack depth: 4024 bytes left