[    1.263824] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    1.263835] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[    1.263838] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    1.263843] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    1.263861] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    1.263863] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    1.263864] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    1.263866] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    1.263868] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    1.263870] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    1.263871] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    1.263873] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    1.263879] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[    1.267309] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[    1.267312] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[    1.267314] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[    1.267478] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    1.267481] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    1.267484] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[    1.267490] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[    1.267493] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[    1.267495] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[    1.267650] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    1.267653] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    1.267656] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[    1.267662] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[    1.267664] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[    1.267667] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[    1.268004] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[    1.269045] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    1.293229] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    1.294096] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    1.318121] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    1.318130] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    1.318135] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes :
[    1.318137] [drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[    1.318139] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    1.318142] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    1.318145] [drm:drm_mode_debug_printmodeline], Modeline 28:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    1.318147] [drm:drm_mode_debug_printmodeline], Modeline 35:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    1.318150] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    1.318153] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    1.318155] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    1.318158] [drm:drm_mode_debug_printmodeline], Modeline 31:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    1.318160] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    1.318163] [drm:drm_mode_debug_printmodeline], Modeline 33:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    1.318167] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[    1.328606] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[    1.328609] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    1.328611] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[    1.328612] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[    1.328614] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[    1.328616] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    1.328617] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[    1.328618] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[    1.338221] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.338255] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.338660] hub 2-1:1.0: USB hub found
[    1.338717] hub 2-1:1.0: 8 ports detected
[    1.377714] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[    1.377799] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.377871] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    1.377952] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.378014] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    1.378084] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.378150] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    1.378204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.378264] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.378769] iTCO_vendor_support: vendor-support=0
[    1.378774] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    1.378964] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    1.379013] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    1.379190] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    1.380945] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    1.386528] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    1.388261] hda_codec: ALC269VB: SKU not ready 0x411111f0
[    1.388931] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[    1.388938] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    1.388940] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    1.388941] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
[    1.388942] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
[    1.388943] ALSA sound/pci/hda/hda_auto_parser.c:410      Rear Mic=0x19
[    1.388945] ALSA sound/pci/hda/hda_auto_parser.c:410      Front Mic=0x18
[    1.388946] ALSA sound/pci/hda/patch_realtek.c:490 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[    1.388947] ALSA sound/pci/hda/patch_realtek.c:573 realtek: Enable default setup for auto mode as fallback
[    1.393523] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[    1.393525] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    1.393527] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[    1.393528] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[    1.393530] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[    1.393531] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    1.393532] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[    1.393533] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[    1.397004] ACPI Warning: 0x00003040-0x0000305f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[    1.397005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.400946] tsc: Refined TSC clocksource calibration: 3392.293 MHz
[    1.404776] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.421350] dracut: Checking ext4: /dev/sda2
[    1.422658] dracut: issuing e2fsck -a  /dev/sda2
[    1.430237] dracut: /dev/sda2: clean, 2016351/7266304 files, 25561930/29048832 blocks
[    1.432059] dracut: Remounting /dev/sda2 with -o ro
[    1.437646] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.443926] dracut: Mounted root filesystem /dev/sda2
[    1.458110] device-mapper: uevent: version 1.0.3
[    1.459660] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    1.474761] dracut: Switching root
[    1.622861] udevd[2366]: starting version 182
[    1.666750] EXT4-fs (sda2): re-mounted. Opts: (null)
[    1.759075] Adding 1023996k swap on /dev/sda1.  Priority:0 extents:1 across:1023996k SS
[    2.071331] watchdog (3329): /proc/3329/oom_adj is deprecated, please use /proc/3329/oom_score_adj instead.
[    2.288544] [drm:intel_crtc_cursor_set], cursor off
[    2.288547] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[    2.288550] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    2.288552] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[    2.288554] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[    2.288555] [drm:intel_crtc_cursor_set], cursor off
[    2.288556] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[    2.288558] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    2.288559] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[    2.288561] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[    2.409643] Switched to clocksource tsc
[    2.429818] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    2.530525] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    2.726906] [drm:intel_enable_rc6], Sandybridge: deep RC6 disabled
[    2.726909] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    2.731551] [drm:gen6_enable_rps], Overclocking supported. Max: 1350MHz, Overclock max: 1350MHz
[    4.061174] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[    4.062533] e1000e 0000:00:19.0 em1: 10/100 speed: disabling TSO
[   41.772701] NET: Registered protocol family 10
[   86.549689] [drm:i915_driver_open], 
[   86.549701] [drm:intel_crtc_cursor_set], cursor off
[   86.549703] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[   86.549706] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[   86.549708] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   86.549710] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   86.549711] [drm:intel_crtc_cursor_set], cursor off
[   86.549712] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[   86.549714] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[   86.549715] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   86.549717] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   86.549721] [drm:i915_driver_open], 
[   86.550040] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.550044] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.550048] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.550050] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.550053] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   86.550054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[   86.550056] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1
[   86.550059] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[   86.550060] [drm:intel_crt_detect], CRT detected via hotplug
[   86.563206] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   86.563217] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[   86.563220] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[   86.563232] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   86.563234] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   86.563236] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   86.563238] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   86.563239] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   86.563241] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   86.563243] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   86.563244] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   86.563246] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   86.563251] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   86.563257] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.563259] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.563263] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.563264] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.563266] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   86.563268] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[   86.563269] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[   86.563463] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   86.563467] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   86.563470] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[   86.563476] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   86.563478] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[   86.563481] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[   86.563678] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   86.563682] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   86.563684] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[   86.563693] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.563697] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.563700] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   86.563703] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[   86.563705] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1
[   86.563709] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[   86.563712] [drm:intel_crt_detect], CRT detected via hotplug
[   86.576814] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   86.576822] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[   86.576825] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[   86.576829] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   86.576832] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   86.576836] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   86.576840] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   86.576843] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   86.576854] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   86.576855] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   86.576857] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   86.576859] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   86.576865] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   86.576870] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.576871] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.576874] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.576876] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.576878] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   86.576879] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[   86.576881] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[   86.577180] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[   86.578128] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   86.600031] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   86.600819] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   86.622713] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   86.622720] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   86.622725] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes :
[   86.622727] [drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[   86.622730] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   86.622733] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   86.622735] [drm:drm_mode_debug_printmodeline], Modeline 28:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   86.622738] [drm:drm_mode_debug_printmodeline], Modeline 35:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   86.622741] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   86.622743] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   86.622746] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   86.622748] [drm:drm_mode_debug_printmodeline], Modeline 31:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   86.622751] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   86.622754] [drm:drm_mode_debug_printmodeline], Modeline 33:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   86.622758] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   86.622764] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.622766] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   86.622799] [drm:drm_mode_addfb], [FB:41]
[   86.622803] [drm:drm_mode_addfb], [FB:42]
[   86.622808] [drm:drm_mode_addfb], [FB:43]
[   86.713443] [drm:drm_mode_setcrtc], [CRTC:3]
[   86.713450] [drm:drm_mode_setcrtc], [CONNECTOR:7:VGA-1]
[   86.713452] [drm:intel_crtc_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
[   86.713455] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
[   86.713458] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   86.713460] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   86.714874] [drm:ironlake_update_plane], Writing base 0085C000 00000000 0 0 5120
[   86.718270] [drm:drm_mode_setcrtc], [CRTC:5]
[   86.718272] [drm:drm_mode_setcrtc], [CONNECTOR:14:DP-1]
[   86.718274] [drm:intel_crtc_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0)
[   86.718276] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[   86.718278] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[   86.718281] [drm:drm_mode_debug_printmodeline], Modeline 44:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   86.718284] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=1
[   86.718286] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   86.718288] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   86.718290] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[   86.718292] [drm:connected_sink_compute_bpp], [CONNECTOR:14:DP-1] checking for sink bpp constrains
[   86.718295] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 108000KHz
[   86.718300] [drm:intel_dp_compute_config], DP link bw 06 lane count 2 clock 162000 bpp 24
[   86.718302] [drm:intel_dp_compute_config], DP link bw required 259200 available 259200
[   86.718304] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[   86.718306] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[   86.718308] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[   86.718309] [drm:intel_dump_pipe_config], cpu_transcoder: B
[   86.718311] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[   86.718312] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[   86.718315] [drm:intel_dump_pipe_config], requested mode:
[   86.718316] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   86.718319] [drm:intel_dump_pipe_config], adjusted mode:
[   86.718320] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   86.718323] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   86.718324] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   86.718326] [drm:intel_dump_pipe_config], ips: 0
[   86.718507] [drm:intel_dp_link_down], 
[   86.777301] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[   86.777307] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[   86.777716] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[   86.777718] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[   86.777721] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[   86.777723] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[   86.777738] [drm:intel_get_shared_dpll], CRTC:5 dropping existing PCH DPLL B
[   86.777740] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[   86.777741] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[   86.777743] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[   86.777752] [drm:ironlake_update_plane], Writing base 0085C000 00000000 0 0 5120
[   86.777755] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[   86.777757] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[   86.777759] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[   86.777761] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[   86.777763] [drm:intel_crtc_mode_set], [ENCODER:13:TMDS-13] set [MODE:0:1280x1024]
[   86.777767] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[   86.777769] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[   86.830318] [drm:ironlake_wait_for_vblank], vblank wait timed out
[   86.882342] [drm:ironlake_wait_for_vblank], vblank wait timed out
[   86.883152] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[   86.883155] [drm:gen6_fdi_link_train], FDI train 1 done.
[   86.883810] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[   86.883813] [drm:gen6_fdi_link_train], FDI train 2 done.
[   86.883814] [drm:gen6_fdi_link_train], FDI train done.
[   86.883817] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[   86.883819] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[   86.885565] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[   86.887778] [drm:intel_dp_start_link_train], clock recovery OK
[   86.887780] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[   86.889220] [drm:intel_dp_set_signal_levels], Using signal levels 00400000
[   86.890660] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[   86.908355] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[   86.908361] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1]
[   86.908366] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[   86.908369] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[   86.908372] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[   86.908376] [drm:check_crtc_state], [CRTC:3]
[   86.908387] [drm:check_crtc_state], [CRTC:5]
[   86.908397] [drm:check_shared_dpll_state], PCH DPLL A
[   86.908401] [drm:check_shared_dpll_state], PCH DPLL B
[   88.084507] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[   88.084509] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
[   88.084511] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   88.084512] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   88.084514] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
[   88.101948] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[   88.101952] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[   88.101956] [drm:drm_mode_debug_printmodeline], Modeline 44:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   88.101959] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[   88.101961] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=1
[   88.101964] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   88.101966] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   88.101968] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[   88.101971] [drm:connected_sink_compute_bpp], [CONNECTOR:14:DP-1] checking for sink bpp constrains
[   88.101982] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 148500KHz
[   88.101984] [drm:intel_dp_compute_config], DP link bw 06 lane count 4 clock 162000 bpp 24
[   88.101985] [drm:intel_dp_compute_config], DP link bw required 356400 available 518400
[   88.101986] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[   88.101987] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[   88.101987] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[   88.101988] [drm:intel_dump_pipe_config], cpu_transcoder: B
[   88.101989] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[   88.101990] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
[   88.101991] [drm:intel_dump_pipe_config], requested mode:
[   88.101992] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[   88.101993] [drm:intel_dump_pipe_config], adjusted mode:
[   88.101994] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[   88.101995] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   88.101996] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   88.101996] [drm:intel_dump_pipe_config], ips: 0
[   88.102190] [drm:intel_dp_link_down], 
[   88.158938] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[   88.158942] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[   88.159350] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[   88.159352] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[   88.159353] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[   88.159355] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[   88.159368] [drm:intel_get_shared_dpll], CRTC:5 dropping existing PCH DPLL B
[   88.159369] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[   88.159370] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[   88.159371] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[   88.159381] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
[   88.159383] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[   88.159384] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[   88.159386] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[   88.159388] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[   88.159389] [drm:intel_crtc_mode_set], [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
[   88.159392] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[   88.159393] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
[   88.210955] [drm:ironlake_wait_for_vblank], vblank wait timed out
[   88.262979] [drm:ironlake_wait_for_vblank], vblank wait timed out
[   88.263788] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[   88.263790] [drm:gen6_fdi_link_train], FDI train 1 done.
[   88.264445] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[   88.264447] [drm:gen6_fdi_link_train], FDI train 2 done.
[   88.264448] [drm:gen6_fdi_link_train], FDI train done.
[   88.264451] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[   88.264452] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[   88.266192] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[   88.268454] [drm:intel_dp_start_link_train], clock recovery OK
[   88.268455] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[   88.269925] [drm:intel_dp_set_signal_levels], Using signal levels 00400000
[   88.271399] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[   88.289993] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[   88.289998] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1]
[   88.290002] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[   88.290004] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[   88.290007] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[   88.290010] [drm:check_crtc_state], [CRTC:3]
[   88.290019] [drm:check_crtc_state], [CRTC:5]
[   88.290029] [drm:check_shared_dpll_state], PCH DPLL A
[   88.290033] [drm:check_shared_dpll_state], PCH DPLL B
[   88.290038] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[   88.290040] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[   88.290042] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   88.290043] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   88.290045] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[   88.290046] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[   88.290047] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   88.290049] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   88.290058] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[   88.290060] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[   88.290061] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   88.290062] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   88.290063] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[   88.290065] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[   88.290066] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   88.290067] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   88.294792] [drm:i915_driver_open], 
[   88.294802] [drm:i915_driver_open], 
[   88.295513] [drm:intel_crtc_cursor_set], cursor off
[   88.295515] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[   88.295518] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[   88.295523] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   88.295525] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   88.295527] [drm:intel_crtc_cursor_set], cursor off
[   88.295528] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[   88.295530] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[   88.295532] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   88.295534] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   98.517872] [drm:i915_driver_open], 
[   98.517881] [drm:intel_crtc_cursor_set], cursor off
[   98.517883] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[   98.517885] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[   98.517887] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   98.517888] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   98.517890] [drm:intel_crtc_cursor_set], cursor off
[   98.517890] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[   98.517892] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[   98.517893] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   98.517895] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   98.517899] [drm:i915_driver_open], 
[   98.518211] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.518215] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.518219] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.518221] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.518223] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   98.518225] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[   98.518227] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1
[   98.518229] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[   98.518230] [drm:intel_crt_detect], CRT detected via hotplug
[   98.531376] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   98.531387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[   98.531391] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[   98.531403] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   98.531406] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   98.531408] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   98.531409] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   98.531411] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   98.531413] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   98.531415] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   98.531416] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   98.531418] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   98.531423] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   98.531429] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.531431] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.531435] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.531436] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.531438] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   98.531440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[   98.531441] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[   98.531595] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   98.531599] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   98.531602] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[   98.531606] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   98.531608] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[   98.531610] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[   98.531767] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   98.531774] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   98.531778] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[   98.531793] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.531797] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.531808] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   98.531810] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[   98.531811] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1
[   98.531814] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[   98.531815] [drm:intel_crt_detect], CRT detected via hotplug
[   98.544891] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   98.544899] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[   98.544901] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[   98.544905] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   98.544909] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   98.544913] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   98.544917] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   98.544928] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   98.544930] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   98.544932] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   98.544933] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   98.544935] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   98.544941] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   98.544945] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.544947] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.544950] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.544952] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.544953] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   98.544955] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[   98.544956] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[   98.545261] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[   98.546208] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   98.568092] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   98.568879] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   98.590756] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   98.590763] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   98.590768] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes :
[   98.590770] [drm:drm_mode_debug_printmodeline], Modeline 27:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[   98.590773] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   98.590775] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   98.590778] [drm:drm_mode_debug_printmodeline], Modeline 28:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   98.590781] [drm:drm_mode_debug_printmodeline], Modeline 35:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   98.590783] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   98.590786] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   98.590789] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   98.590791] [drm:drm_mode_debug_printmodeline], Modeline 31:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   98.590794] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   98.590797] [drm:drm_mode_debug_printmodeline], Modeline 33:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   98.590801] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   98.590807] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.590809] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[   98.590843] [drm:drm_mode_addfb], [FB:41]
[   98.590846] [drm:drm_mode_addfb], [FB:42]
[   98.590851] [drm:drm_mode_addfb], [FB:43]
[   98.651386] [drm:drm_mode_setcrtc], [CRTC:3]
[   98.651391] [drm:drm_mode_setcrtc], [CONNECTOR:7:VGA-1]
[   98.651393] [drm:intel_crtc_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
[   98.651397] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
[   98.651399] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   98.651402] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   98.652825] [drm:ironlake_update_plane], Writing base 0085C000 00000000 0 0 5120
[   98.668781] [drm:drm_mode_setcrtc], [CRTC:5]
[   98.668784] [drm:drm_mode_setcrtc], [CONNECTOR:14:DP-1]
[   98.668786] [drm:intel_crtc_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0)
[   98.668788] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[   98.668789] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[   98.668792] [drm:drm_mode_debug_printmodeline], Modeline 44:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   98.668795] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=1
[   98.668798] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[   98.668799] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[   98.668802] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[   98.668804] [drm:connected_sink_compute_bpp], [CONNECTOR:14:DP-1] checking for sink bpp constrains
[   98.668806] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 108000KHz
[   98.668811] [drm:intel_dp_compute_config], DP link bw 06 lane count 2 clock 162000 bpp 24
[   98.668813] [drm:intel_dp_compute_config], DP link bw required 259200 available 259200
[   98.668815] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[   98.668817] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[   98.668819] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[   98.668820] [drm:intel_dump_pipe_config], cpu_transcoder: B
[   98.668822] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[   98.668823] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[   98.668825] [drm:intel_dump_pipe_config], requested mode:
[   98.668827] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   98.668830] [drm:intel_dump_pipe_config], adjusted mode:
[   98.668831] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   98.668833] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   98.668835] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   98.668837] [drm:intel_dump_pipe_config], ips: 0
[   98.669017] [drm:intel_dp_link_down], 
[   98.727812] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[   98.727817] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[   98.728226] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[   98.728228] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[   98.728230] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[   98.728232] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[   98.728247] [drm:intel_get_shared_dpll], CRTC:5 dropping existing PCH DPLL B
[   98.728249] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[   98.728250] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[   98.728252] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[   98.728261] [drm:ironlake_update_plane], Writing base 0085C000 00000000 0 0 5120
[   98.728264] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[   98.728265] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[   98.728267] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[   98.728269] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[   98.728272] [drm:intel_crtc_mode_set], [ENCODER:13:TMDS-13] set [MODE:0:1280x1024]
[   98.728275] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[   98.728277] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[   98.780830] [drm:ironlake_wait_for_vblank], vblank wait timed out
[   98.832853] [drm:ironlake_wait_for_vblank], vblank wait timed out
[   98.833664] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[   98.833666] [drm:gen6_fdi_link_train], FDI train 1 done.
[   98.834322] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[   98.834324] [drm:gen6_fdi_link_train], FDI train 2 done.
[   98.834326] [drm:gen6_fdi_link_train], FDI train done.
[   98.834329] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[   98.834331] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[   98.836076] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[   98.838290] [drm:intel_dp_start_link_train], clock recovery OK
[   98.838292] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[   98.839732] [drm:intel_dp_set_signal_levels], Using signal levels 00400000
[   98.841171] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[   98.858867] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[   98.858873] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1]
[   98.858877] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[   98.858880] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[   98.858883] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[   98.858887] [drm:check_crtc_state], [CRTC:3]
[   98.858897] [drm:check_crtc_state], [CRTC:5]
[   98.858907] [drm:check_shared_dpll_state], PCH DPLL A
[   98.858911] [drm:check_shared_dpll_state], PCH DPLL B
[  100.036003] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[  100.036005] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
[  100.036006] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  100.036007] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  100.036009] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
[  100.053430] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[  100.053432] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[  100.053434] [drm:drm_mode_debug_printmodeline], Modeline 44:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[  100.053437] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[  100.053438] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=1
[  100.053440] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  100.053441] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  100.053443] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[  100.053444] [drm:connected_sink_compute_bpp], [CONNECTOR:14:DP-1] checking for sink bpp constrains
[  100.053446] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 148500KHz
[  100.053459] [drm:intel_dp_compute_config], DP link bw 06 lane count 4 clock 162000 bpp 24
[  100.053460] [drm:intel_dp_compute_config], DP link bw required 356400 available 518400
[  100.053461] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[  100.053462] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[  100.053463] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[  100.053463] [drm:intel_dump_pipe_config], cpu_transcoder: B
[  100.053464] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[  100.053466] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
[  100.053466] [drm:intel_dump_pipe_config], requested mode:
[  100.053468] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[  100.053468] [drm:intel_dump_pipe_config], adjusted mode:
[  100.053470] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[  100.053471] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  100.053472] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  100.053472] [drm:intel_dump_pipe_config], ips: 0
[  100.053663] [drm:intel_dp_link_down], 
[  100.108449] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[  100.108453] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[  100.108861] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  100.108863] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[  100.108864] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[  100.108866] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[  100.108880] [drm:intel_get_shared_dpll], CRTC:5 dropping existing PCH DPLL B
[  100.108881] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[  100.108882] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[  100.108882] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[  100.108892] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
[  100.108894] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  100.108895] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[  100.108897] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[  100.108898] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[  100.108900] [drm:intel_crtc_mode_set], [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
[  100.108903] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  100.108904] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
[  100.160466] [drm:ironlake_wait_for_vblank], vblank wait timed out
[  100.212490] [drm:ironlake_wait_for_vblank], vblank wait timed out
[  100.213299] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[  100.213301] [drm:gen6_fdi_link_train], FDI train 1 done.
[  100.213956] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[  100.213958] [drm:gen6_fdi_link_train], FDI train 2 done.
[  100.213959] [drm:gen6_fdi_link_train], FDI train done.
[  100.213962] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[  100.213963] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[  100.215703] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[  100.217966] [drm:intel_dp_start_link_train], clock recovery OK
[  100.217967] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[  100.219439] [drm:intel_dp_set_signal_levels], Using signal levels 00400000
[  100.220911] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[  100.239504] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[  100.239509] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1]
[  100.239513] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[  100.239515] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[  100.239517] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[  100.239521] [drm:check_crtc_state], [CRTC:3]
[  100.239529] [drm:check_crtc_state], [CRTC:5]
[  100.239539] [drm:check_shared_dpll_state], PCH DPLL A
[  100.239542] [drm:check_shared_dpll_state], PCH DPLL B
[  100.239547] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[  100.239549] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[  100.239551] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  100.239552] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  100.239553] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[  100.239555] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[  100.239556] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  100.239557] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  100.239567] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[  100.239568] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[  100.239569] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  100.239571] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  100.239572] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[  100.239574] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[  100.239575] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  100.239576] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  100.244268] [drm:i915_driver_open], 
[  100.244277] [drm:i915_driver_open], 
[  100.245005] [drm:intel_crtc_cursor_set], cursor off
[  100.245007] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[  100.245010] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[  100.245012] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  100.245014] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  100.245016] [drm:intel_crtc_cursor_set], cursor off
[  100.245017] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[  100.245019] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[  100.245021] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  100.245023] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  488.126375] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 0
[  488.126403] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  488.126407] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event.
[  488.126410] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event.
[  488.126414] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  488.126609] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  488.126617] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  488.126621] [drm:intel_hpd_irq_event], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
[  488.127130] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[  488.127601] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  488.127604] [drm:intel_hpd_irq_event], [CONNECTOR:14:DP-1] status updated from 1 to 2
[  488.127652] [drm:drm_fb_helper_hotplug_event], 
[  488.127654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[  488.127657] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1
[  488.127660] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[  488.127662] [drm:intel_crt_detect], CRT detected via hotplug
[  488.140725] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[  488.140731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[  488.140732] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[  488.140735] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[  488.140737] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[  488.140739] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[  488.140740] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  488.140742] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[  488.140744] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  488.140746] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[  488.140748] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  488.140749] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  488.140751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[  488.140752] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  488.140922] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  488.140924] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  488.140926] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[  488.140927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[  488.140929] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  488.140931] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[  488.140933] [drm:drm_setup_crtcs], 
[  488.140935] [drm:drm_enable_connectors], connector 7 enabled? yes
[  488.140936] [drm:drm_enable_connectors], connector 10 enabled? no
[  488.140937] [drm:drm_enable_connectors], connector 14 enabled? no
[  488.140938] [drm:drm_target_preferred], looking for cmdline mode on connector 7
[  488.140939] [drm:drm_target_preferred], looking for preferred mode on connector 7
[  488.140940] [drm:drm_target_preferred], found mode 1280x1024
[  488.140941] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[  488.140943] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3
[  488.140945] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[  488.140947] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[  488.140949] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  488.140951] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  488.140952] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[  488.140954] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=0
[  488.140955] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [NOCRTC]
[  488.140956] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[  488.140957] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  488.140958] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[  488.140960] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
[  488.141144] [drm:intel_dp_link_down], 
[  488.199436] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[  488.199441] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[  488.199851] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  488.199853] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[  488.199855] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[  488.199857] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[  488.199863] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[  488.199867] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[  488.199870] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[  488.199873] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[  488.199876] [drm:check_crtc_state], [CRTC:3]
[  488.199885] [drm:check_crtc_state], [CRTC:5]
[  488.199887] [drm:check_shared_dpll_state], PCH DPLL A
[  488.199891] [drm:check_shared_dpll_state], PCH DPLL B
[  488.309187] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 1
[  488.309197] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  488.309199] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event.
[  488.309201] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event.
[  488.309203] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  488.309357] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  488.309360] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  488.309361] [drm:intel_hpd_irq_event], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
[  488.309364] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  488.309655] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[  488.310596] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  488.319402] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 2
[  488.332472] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  488.332474] [drm:intel_hpd_irq_event], [CONNECTOR:14:DP-1] status updated from 2 to 1
[  488.332511] [drm:drm_fb_helper_hotplug_event], 
[  488.332513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[  488.332515] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1
[  488.332518] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[  488.332519] [drm:intel_crt_detect], CRT detected via hotplug
[  488.345544] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[  488.345549] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[  488.345550] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[  488.345553] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[  488.345554] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[  488.345556] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[  488.345558] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  488.345560] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[  488.345562] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  488.345563] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[  488.345565] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  488.345567] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  488.345569] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[  488.345570] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  488.345740] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  488.345742] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  488.345743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[  488.345745] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[  488.345746] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  488.346043] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[  488.347035] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  488.368922] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  488.369708] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  488.390495] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 3
[  488.391598] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  488.391605] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[  488.391610] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes :
[  488.391611] [drm:drm_mode_debug_printmodeline], Modeline 28:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[  488.391614] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[  488.391617] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[  488.391620] [drm:drm_mode_debug_printmodeline], Modeline 29:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[  488.391623] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[  488.391626] [drm:drm_mode_debug_printmodeline], Modeline 37:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  488.391628] [drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[  488.391631] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  488.391634] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[  488.391636] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  488.391639] [drm:drm_mode_debug_printmodeline], Modeline 34:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  488.391642] [drm:drm_setup_crtcs], 
[  488.391643] [drm:drm_enable_connectors], connector 7 enabled? yes
[  488.391645] [drm:drm_enable_connectors], connector 10 enabled? no
[  488.391646] [drm:drm_enable_connectors], connector 14 enabled? yes
[  488.391648] [drm:drm_target_preferred], looking for cmdline mode on connector 7
[  488.391649] [drm:drm_target_preferred], looking for preferred mode on connector 7
[  488.391651] [drm:drm_target_preferred], found mode 1280x1024
[  488.391652] [drm:drm_target_preferred], looking for cmdline mode on connector 14
[  488.391653] [drm:drm_target_preferred], looking for preferred mode on connector 14
[  488.391655] [drm:drm_target_preferred], found mode 1920x1080
[  488.391656] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[  488.391659] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3
[  488.391661] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5
[  488.391663] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[  488.391665] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[  488.391667] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  488.391669] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[  488.391671] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[  488.391673] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=0
[  488.391675] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[  488.391676] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  488.391678] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  488.391680] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[  488.391681] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[  488.391684] [drm:connected_sink_compute_bpp], [CONNECTOR:14:DP-1] checking for sink bpp constrains
[  488.391686] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 148500KHz
[  488.391689] [drm:intel_dp_compute_config], DP link bw 06 lane count 4 clock 162000 bpp 24
[  488.391691] [drm:intel_dp_compute_config], DP link bw required 356400 available 518400
[  488.391693] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[  488.391695] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[  488.391697] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[  488.391698] [drm:intel_dump_pipe_config], cpu_transcoder: B
[  488.391700] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[  488.391701] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
[  488.391704] [drm:intel_dump_pipe_config], requested mode:
[  488.391705] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[  488.391708] [drm:intel_dump_pipe_config], adjusted mode:
[  488.391709] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[  488.391712] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  488.391714] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  488.391715] [drm:intel_dump_pipe_config], ips: 0
[  488.391729] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[  488.391731] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[  488.391732] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[  488.391743] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
[  488.391746] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  488.391748] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[  488.391750] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[  488.391752] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[  488.391754] [drm:intel_crtc_mode_set], [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
[  488.391758] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  488.391760] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
[  488.443541] [drm:ironlake_wait_for_vblank], vblank wait timed out
[  488.495566] [drm:ironlake_wait_for_vblank], vblank wait timed out
[  488.496376] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[  488.496378] [drm:gen6_fdi_link_train], FDI train 1 done.
[  488.497034] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[  488.497036] [drm:gen6_fdi_link_train], FDI train 2 done.
[  488.497038] [drm:gen6_fdi_link_train], FDI train done.
[  488.497041] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[  488.497042] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[  488.498783] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[  488.501048] [drm:intel_dp_start_link_train], clock recovery OK
[  488.501049] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[  488.502521] [drm:intel_dp_set_signal_levels], Using signal levels 00400000
[  488.503993] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[  488.522579] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[  488.522585] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1]
[  488.522589] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[  488.522592] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[  488.522595] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[  488.522599] [drm:check_crtc_state], [CRTC:3]
[  488.522609] [drm:check_crtc_state], [CRTC:5]
[  488.522619] [drm:check_shared_dpll_state], PCH DPLL A
[  488.522623] [drm:check_shared_dpll_state], PCH DPLL B
[  488.522627] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  488.522629] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event.
[  488.522631] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event.
[  488.522633] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  488.522787] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  488.522790] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  488.522791] [drm:intel_hpd_irq_event], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
[  488.523253] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[  488.523708] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  488.523974] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[  488.524924] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  488.546803] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  488.546805] [drm:intel_hpd_irq_event], [CONNECTOR:14:DP-1] status updated from 1 to 1
[  701.794969] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
[  701.794973] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
[  701.795383] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
[  701.795385] [drm:ironlake_check_srwm], watermark 1: display plane 16, fbc lines 3, cursor 6
[  701.795386] [drm:ironlake_check_srwm], watermark 2: display plane 21, fbc lines 3, cursor 6
[  701.795387] [drm:ironlake_check_srwm], watermark 3: display plane 105, fbc lines 3, cursor 6
[  701.795393] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1]
[  701.795396] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[  701.795398] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[  701.795400] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[  701.795403] [drm:check_crtc_state], [CRTC:3]
[  701.795404] [drm:check_crtc_state], [CRTC:5]
[  701.795414] [drm:check_shared_dpll_state], PCH DPLL A
[  701.795417] [drm:check_shared_dpll_state], PCH DPLL B
[  701.795612] [drm:intel_dp_link_down], 
[  701.851973] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[  701.851976] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[  701.852388] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[  701.852390] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[  701.852393] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[  701.852395] [drm:check_crtc_state], [CRTC:3]
[  701.852397] [drm:check_crtc_state], [CRTC:5]
[  701.852399] [drm:check_shared_dpll_state], PCH DPLL A
[  701.852403] [drm:check_shared_dpll_state], PCH DPLL B
[  702.009779] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 0
[  702.009790] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  702.009795] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event.
[  702.009797] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event.
[  702.009799] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  702.009950] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  702.009952] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  702.009954] [drm:intel_hpd_irq_event], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
[  702.009956] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  702.010227] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[  702.011174] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  702.033168] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  702.033170] [drm:intel_hpd_irq_event], [CONNECTOR:14:DP-1] status updated from 1 to 1
[  804.644093] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 0
[  804.644120] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  804.644123] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event.
[  804.644126] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event.
[  804.644129] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  804.644293] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  804.644297] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  804.644300] [drm:intel_hpd_irq_event], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
[  804.644303] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  804.644307] [drm:intel_hpd_irq_event], [CONNECTOR:14:DP-1] status updated from 1 to 2
[  804.644424] [drm:drm_fb_helper_hotplug_event], 
[  804.644426] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[  804.644428] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1
[  804.644430] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40018, result 1
[  804.644432] [drm:intel_crt_detect], CRT detected via hotplug
[  804.657477] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[  804.657488] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[  804.657492] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[  804.657496] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[  804.657507] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[  804.657509] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[  804.657510] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  804.657512] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[  804.657514] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  804.657516] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[  804.657517] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  804.657519] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  804.657521] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[  804.657522] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  804.657715] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  804.657719] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  804.657723] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[  804.657726] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[  804.657729] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  804.657733] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[  804.657737] [drm:drm_setup_crtcs], 
[  804.657739] [drm:drm_enable_connectors], connector 7 enabled? yes
[  804.657741] [drm:drm_enable_connectors], connector 10 enabled? no
[  804.657744] [drm:drm_enable_connectors], connector 14 enabled? no
[  804.657746] [drm:drm_target_preferred], looking for cmdline mode on connector 7
[  804.657756] [drm:drm_target_preferred], looking for preferred mode on connector 7
[  804.657758] [drm:drm_target_preferred], found mode 1280x1024
[  804.657758] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[  804.657760] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3
[  804.657762] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[  804.657764] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[  804.657766] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  804.657768] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  804.657769] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  804.657771] [drm:connected_sink_compute_bpp], [CONNECTOR:7:VGA-1] checking for sink bpp constrains
[  804.657773] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 2
[  804.657774] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[  804.657776] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[  804.657777] [drm:intel_dump_pipe_config], cpu_transcoder: A
[  804.657778] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[  804.657779] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[  804.657781] [drm:intel_dump_pipe_config], requested mode:
[  804.657782] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[  804.657784] [drm:intel_dump_pipe_config], adjusted mode:
[  804.657784] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[  804.657786] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  804.657788] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  804.657789] [drm:intel_dump_pipe_config], ips: 0
[  804.657798] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A
[  804.657800] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A
[  804.657801] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
[  804.657802] [drm:intel_get_shared_dpll], setting up PCH DPLL A
[  804.657810] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
[  804.657813] [drm:intel_crtc_mode_set], [ENCODER:8:DAC-8] set [MODE:0:1280x1024]
[  804.657816] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  804.657817] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[  804.657819] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[  804.657821] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[  804.709419] [drm:ironlake_wait_for_vblank], vblank wait timed out
[  804.761443] [drm:ironlake_wait_for_vblank], vblank wait timed out
[  804.762257] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[  804.762259] [drm:gen6_fdi_link_train], FDI train 1 done.
[  804.762915] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[  804.762917] [drm:gen6_fdi_link_train], FDI train 2 done.
[  804.762918] [drm:gen6_fdi_link_train], FDI train done.
[  804.762920] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
[  804.762922] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
[  804.782476] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[  804.782484] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[  804.782488] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[  804.782492] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[  804.782496] [drm:check_crtc_state], [CRTC:3]
[  804.782516] [drm:check_crtc_state], [CRTC:5]
[  804.782518] [drm:check_shared_dpll_state], PCH DPLL A
[  804.782521] [drm:check_shared_dpll_state], PCH DPLL B
[  804.782525] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[  804.782527] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=0
[  804.782528] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [NOCRTC]
[  804.782530] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[  804.782531] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  804.782532] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[  804.782533] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
[  804.782537] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[  804.782541] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[  804.782543] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[  804.782545] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[  804.782547] [drm:check_crtc_state], [CRTC:3]
[  804.782556] [drm:check_crtc_state], [CRTC:5]
[  804.782557] [drm:check_shared_dpll_state], PCH DPLL A
[  804.782560] [drm:check_shared_dpll_state], PCH DPLL B
[  805.798412] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 0
[  805.798438] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  805.798441] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event.
[  805.798444] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event.
[  805.798447] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  805.798644] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  805.798651] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  805.798655] [drm:intel_hpd_irq_event], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
[  805.798658] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  805.798978] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[  805.799928] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  805.800470] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 1
[  805.821804] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  805.821807] [drm:intel_hpd_irq_event], [CONNECTOR:14:DP-1] status updated from 2 to 1
[  805.821845] [drm:drm_fb_helper_hotplug_event], 
[  805.821847] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[  805.821849] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1
[  805.821852] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[  805.821853] [drm:intel_crt_detect], CRT detected via hotplug
[  805.834871] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[  805.834877] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[  805.834878] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[  805.834880] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[  805.834882] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[  805.834884] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[  805.834886] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  805.834888] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[  805.834889] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  805.834891] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[  805.834893] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  805.834895] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  805.834897] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[  805.834898] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  805.835066] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  805.835068] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  805.835070] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[  805.835071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[  805.835072] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  805.835370] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[  805.836312] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  805.858191] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  805.858975] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  805.880851] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  805.880859] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[  805.880863] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes :
[  805.880865] [drm:drm_mode_debug_printmodeline], Modeline 28:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[  805.880867] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[  805.880870] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[  805.880873] [drm:drm_mode_debug_printmodeline], Modeline 29:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[  805.880876] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[  805.880879] [drm:drm_mode_debug_printmodeline], Modeline 37:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  805.880881] [drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[  805.880884] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  805.880886] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[  805.880889] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  805.880892] [drm:drm_mode_debug_printmodeline], Modeline 34:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  805.880894] [drm:drm_setup_crtcs], 
[  805.880896] [drm:drm_enable_connectors], connector 7 enabled? yes
[  805.880897] [drm:drm_enable_connectors], connector 10 enabled? no
[  805.880899] [drm:drm_enable_connectors], connector 14 enabled? yes
[  805.880900] [drm:drm_target_preferred], looking for cmdline mode on connector 7
[  805.880902] [drm:drm_target_preferred], looking for preferred mode on connector 7
[  805.880903] [drm:drm_target_preferred], found mode 1280x1024
[  805.880905] [drm:drm_target_preferred], looking for cmdline mode on connector 14
[  805.880906] [drm:drm_target_preferred], looking for preferred mode on connector 14
[  805.880908] [drm:drm_target_preferred], found mode 1920x1080
[  805.880909] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[  805.880912] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3
[  805.880913] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5
[  805.880915] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[  805.880918] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[  805.880920] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  805.880922] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[  805.880924] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[  805.880926] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=0
[  805.880927] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[  805.880929] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[  805.880931] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[  805.880932] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[  805.880934] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[  805.880936] [drm:connected_sink_compute_bpp], [CONNECTOR:14:DP-1] checking for sink bpp constrains
[  805.880938] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 148500KHz
[  805.880946] [drm:intel_dp_compute_config], DP link bw 06 lane count 4 clock 162000 bpp 24
[  805.880955] [drm:intel_dp_compute_config], DP link bw required 356400 available 518400
[  805.880964] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[  805.880972] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[  805.880981] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[  805.880989] [drm:intel_dump_pipe_config], cpu_transcoder: B
[  805.880992] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[  805.880993] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
[  805.880996] [drm:intel_dump_pipe_config], requested mode:
[  805.880997] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[  805.881000] [drm:intel_dump_pipe_config], adjusted mode:
[  805.881001] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[  805.881004] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  805.881005] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  805.881007] [drm:intel_dump_pipe_config], ips: 0
[  805.881021] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[  805.881022] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[  805.881024] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[  805.881033] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
[  805.881036] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  805.881038] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[  805.881040] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[  805.881042] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[  805.881044] [drm:intel_crtc_mode_set], [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
[  805.881048] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[  805.881050] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
[  805.932967] [drm:ironlake_wait_for_vblank], vblank wait timed out
[  805.984991] [drm:ironlake_wait_for_vblank], vblank wait timed out
[  805.985801] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[  805.985804] [drm:gen6_fdi_link_train], FDI train 1 done.
[  805.986460] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[  805.986462] [drm:gen6_fdi_link_train], FDI train 2 done.
[  805.986463] [drm:gen6_fdi_link_train], FDI train done.
[  805.986466] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[  805.986468] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[  805.988808] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[  805.991037] [drm:intel_dp_set_signal_levels], Using signal levels 02000000
[  805.992732] [drm:intel_dp_start_link_train], clock recovery OK
[  805.992733] [drm:intel_dp_set_signal_levels], Using signal levels 02000000
[  805.994205] [drm:intel_dp_set_signal_levels], Using signal levels 02800000
[  805.995676] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[  806.014006] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[  806.014012] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1]
[  806.014016] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[  806.014019] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[  806.014022] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[  806.014026] [drm:check_crtc_state], [CRTC:3]
[  806.014036] [drm:check_crtc_state], [CRTC:5]
[  806.014046] [drm:check_shared_dpll_state], PCH DPLL A
[  806.014050] [drm:check_shared_dpll_state], PCH DPLL B
[  806.014054] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  806.014056] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event.
[  806.014058] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event.
[  806.014060] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[  806.014215] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  806.014217] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  806.014219] [drm:intel_hpd_irq_event], [CONNECTOR:10:HDMI-A-1] status updated from 2 to 2
[  806.014673] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[  806.015127] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[  806.015917] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[  806.016860] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  806.038732] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[  806.038735] [drm:intel_hpd_irq_event], [CONNECTOR:14:DP-1] status updated from 1 to 1
[ 1215.259372] [drm:i915_driver_open], 
[ 1215.259385] [drm:intel_crtc_cursor_set], cursor off
[ 1215.259387] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[ 1215.259390] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1215.259393] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1215.259394] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1215.259396] [drm:intel_crtc_cursor_set], cursor off
[ 1215.259397] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[ 1215.259399] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 1215.259400] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1215.259401] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1215.259406] [drm:i915_driver_open], 
[ 1215.259727] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.259730] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.259735] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.259737] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.259739] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 1215.259741] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[ 1215.259743] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1
[ 1215.259751] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[ 1215.259756] [drm:intel_crt_detect], CRT detected via hotplug
[ 1215.272863] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 1215.272874] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[ 1215.272878] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 1215.272890] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1215.272892] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 1215.272894] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 1215.272896] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 1215.272898] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 1215.272899] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 1215.272901] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 1215.272903] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 1215.272904] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 1215.272909] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 1215.272915] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.272917] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.272922] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.272923] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.272925] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 1215.272927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[ 1215.272928] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[ 1215.273107] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 1215.273112] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 1215.273115] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[ 1215.273120] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 1215.273123] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1]
[ 1215.273125] [drm:intel_hdmi_detect], [CONNECTOR:10:HDMI-A-1]
[ 1215.273318] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 1215.273322] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 1215.273325] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI-A-1] disconnected
[ 1215.273334] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.273337] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.273341] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 1215.273343] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1]
[ 1215.273346] [drm:intel_crt_detect], [CONNECTOR:7:VGA-1] force=1
[ 1215.273350] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1
[ 1215.273360] [drm:intel_crt_detect], CRT detected via hotplug
[ 1215.286433] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 1215.286441] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:VGA-1] probed modes :
[ 1215.286444] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 1215.286448] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1215.286451] [drm:drm_mode_debug_printmodeline], Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 1215.286455] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 1215.286459] [drm:drm_mode_debug_printmodeline], Modeline 24:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 1215.286469] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 1215.286471] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 1215.286472] [drm:drm_mode_debug_printmodeline], Modeline 19:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 1215.286474] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 1215.286476] [drm:drm_mode_debug_printmodeline], Modeline 21:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 1215.286482] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[ 1215.286486] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.286488] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.286491] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.286493] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.286495] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 1215.286496] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[ 1215.286498] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[ 1215.286807] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00
[ 1215.287754] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 1215.309636] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 1215.310425] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 1215.332300] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 1215.332307] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 1215.332312] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] probed modes :
[ 1215.332314] [drm:drm_mode_debug_printmodeline], Modeline 28:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 1215.332317] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1215.332320] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1215.332322] [drm:drm_mode_debug_printmodeline], Modeline 29:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 1215.332325] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 1215.332328] [drm:drm_mode_debug_printmodeline], Modeline 37:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 1215.332330] [drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 1215.332333] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 1215.332336] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 1215.332338] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 1215.332341] [drm:drm_mode_debug_printmodeline], Modeline 34:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 1215.332346] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 1215.332351] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.332354] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 1215.332389] [drm:drm_mode_addfb], [FB:41]
[ 1215.332393] [drm:drm_mode_addfb], [FB:42]
[ 1215.332398] [drm:drm_mode_addfb], [FB:43]
[ 1215.392986] [drm:drm_mode_setcrtc], [CRTC:3]
[ 1215.392992] [drm:drm_mode_setcrtc], [CONNECTOR:7:VGA-1]
[ 1215.392995] [drm:intel_crtc_set_config], [CRTC:3] [FB:41] #connectors=1 (x y) (0 0)
[ 1215.392998] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
[ 1215.393000] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1215.393003] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1215.394421] [drm:ironlake_update_plane], Writing base 0085C000 00000000 0 0 5120
[ 1215.399817] [drm:drm_mode_setcrtc], [CRTC:5]
[ 1215.399820] [drm:drm_mode_setcrtc], [CONNECTOR:14:DP-1]
[ 1215.399821] [drm:intel_crtc_set_config], [CRTC:5] [FB:41] #connectors=1 (x y) (0 0)
[ 1215.399824] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 1215.399826] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 1215.399829] [drm:drm_mode_debug_printmodeline], Modeline 44:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1215.399832] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=1
[ 1215.399834] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1215.399836] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1215.399838] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 1215.399840] [drm:connected_sink_compute_bpp], [CONNECTOR:14:DP-1] checking for sink bpp constrains
[ 1215.399842] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 108000KHz
[ 1215.399847] [drm:intel_dp_compute_config], DP link bw 06 lane count 2 clock 162000 bpp 24
[ 1215.399849] [drm:intel_dp_compute_config], DP link bw required 259200 available 259200
[ 1215.399851] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[ 1215.399853] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 1215.399855] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[ 1215.399857] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1215.399858] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1215.399859] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[ 1215.399862] [drm:intel_dump_pipe_config], requested mode:
[ 1215.399863] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1215.399866] [drm:intel_dump_pipe_config], adjusted mode:
[ 1215.399867] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1215.399870] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1215.399872] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1215.399874] [drm:intel_dump_pipe_config], ips: 0
[ 1215.400032] [drm:intel_dp_link_down], 
[ 1215.467852] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[ 1215.467856] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[ 1215.468266] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[ 1215.468268] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[ 1215.468270] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[ 1215.468272] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[ 1215.468287] [drm:intel_get_shared_dpll], CRTC:5 dropping existing PCH DPLL B
[ 1215.468289] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[ 1215.468290] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[ 1215.468292] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[ 1215.468302] [drm:ironlake_update_plane], Writing base 0085C000 00000000 0 0 5120
[ 1215.468305] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[ 1215.468307] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[ 1215.468309] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[ 1215.468311] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[ 1215.468313] [drm:intel_crtc_mode_set], [ENCODER:13:TMDS-13] set [MODE:0:1280x1024]
[ 1215.468317] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[ 1215.468319] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 7, cursor: 6
[ 1215.520869] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 1215.572893] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 1215.573703] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[ 1215.573706] [drm:gen6_fdi_link_train], FDI train 1 done.
[ 1215.574361] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[ 1215.574364] [drm:gen6_fdi_link_train], FDI train 2 done.
[ 1215.574365] [drm:gen6_fdi_link_train], FDI train done.
[ 1215.574368] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[ 1215.574370] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[ 1215.576133] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 1215.578345] [drm:intel_dp_start_link_train], clock recovery OK
[ 1215.578347] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 1215.579786] [drm:intel_dp_set_signal_levels], Using signal levels 00400000
[ 1215.581226] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[ 1215.598907] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[ 1215.598913] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1]
[ 1215.598917] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[ 1215.598920] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[ 1215.598923] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1215.598927] [drm:check_crtc_state], [CRTC:3]
[ 1215.598937] [drm:check_crtc_state], [CRTC:5]
[ 1215.598947] [drm:check_shared_dpll_state], PCH DPLL A
[ 1215.598951] [drm:check_shared_dpll_state], PCH DPLL B
[ 1216.783694] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[ 1216.783696] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
[ 1216.783697] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1216.783698] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1216.783701] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
[ 1216.799470] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[ 1216.799472] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 1216.799474] [drm:drm_mode_debug_printmodeline], Modeline 44:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1216.799477] [drm:drm_mode_debug_printmodeline], Modeline 39:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 1216.799478] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=1
[ 1216.799480] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1216.799481] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1216.799483] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 1216.799484] [drm:connected_sink_compute_bpp], [CONNECTOR:14:DP-1] checking for sink bpp constrains
[ 1216.799486] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 148500KHz
[ 1216.799489] [drm:intel_dp_compute_config], DP link bw 06 lane count 4 clock 162000 bpp 24
[ 1216.799490] [drm:intel_dp_compute_config], DP link bw required 356400 available 518400
[ 1216.799491] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 2
[ 1216.799502] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 1216.799504] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[ 1216.799504] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1216.799505] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1216.799506] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
[ 1216.799507] [drm:intel_dump_pipe_config], requested mode:
[ 1216.799509] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 1216.799509] [drm:intel_dump_pipe_config], adjusted mode:
[ 1216.799511] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 1216.799512] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1216.799513] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1216.799513] [drm:intel_dump_pipe_config], ips: 0
[ 1216.799704] [drm:intel_dp_link_down], 
[ 1216.866498] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[ 1216.866501] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[ 1216.866910] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[ 1216.866911] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[ 1216.866913] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[ 1216.866914] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[ 1216.866928] [drm:intel_get_shared_dpll], CRTC:5 dropping existing PCH DPLL B
[ 1216.866929] [drm:intel_get_shared_dpll], CRTC:5 allocated PCH DPLL B
[ 1216.866930] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[ 1216.866931] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[ 1216.866940] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680
[ 1216.866942] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[ 1216.866944] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6
[ 1216.866945] [drm:ironlake_check_srwm], watermark 2: display plane 16, fbc lines 3, cursor 6
[ 1216.866947] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[ 1216.866949] [drm:intel_crtc_mode_set], [ENCODER:13:TMDS-13] set [MODE:0:1920x1080]
[ 1216.866951] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[ 1216.866953] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6
[ 1216.918515] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 1216.970538] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 1216.971348] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100
[ 1216.971350] [drm:gen6_fdi_link_train], FDI train 1 done.
[ 1216.972005] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[ 1216.972007] [drm:gen6_fdi_link_train], FDI train 2 done.
[ 1216.972007] [drm:gen6_fdi_link_train], FDI train done.
[ 1216.972010] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[ 1216.972011] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[ 1216.973773] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 1216.976034] [drm:intel_dp_start_link_train], clock recovery OK
[ 1216.976035] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 1216.977507] [drm:intel_dp_set_signal_levels], Using signal levels 00400000
[ 1216.978978] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[ 1216.997552] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[ 1216.997557] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1]
[ 1216.997561] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[ 1216.997563] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[ 1216.997566] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1216.997569] [drm:check_crtc_state], [CRTC:3]
[ 1216.997578] [drm:check_crtc_state], [CRTC:5]
[ 1216.997588] [drm:check_shared_dpll_state], PCH DPLL A
[ 1216.997591] [drm:check_shared_dpll_state], PCH DPLL B
[ 1216.997596] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[ 1216.997598] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1216.997600] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1216.997601] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1216.997602] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[ 1216.997604] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 1216.997606] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1216.997607] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1216.997617] [drm:intel_connector_check_state], [CONNECTOR:7:VGA-1]
[ 1216.997621] [drm:intel_connector_check_state], [CONNECTOR:14:DP-1]
[ 1216.997625] [drm:check_encoder_state], [ENCODER:8:DAC-8]
[ 1216.997627] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[ 1216.997630] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1216.997633] [drm:check_crtc_state], [CRTC:3]
[ 1216.997641] [drm:check_crtc_state], [CRTC:5]
[ 1216.997651] [drm:check_shared_dpll_state], PCH DPLL A
[ 1216.997654] [drm:check_shared_dpll_state], PCH DPLL B
[ 1216.997713] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[ 1216.997715] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1216.997716] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1216.997717] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1216.997719] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[ 1216.997720] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 1216.997722] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1216.997723] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1217.002459] [drm:i915_driver_open], 
[ 1217.002469] [drm:i915_driver_open], 
[ 1217.003186] [drm:intel_crtc_cursor_set], cursor off
[ 1217.003188] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0)
[ 1217.003190] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1217.003193] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1217.003195] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]
[ 1217.003197] [drm:intel_crtc_cursor_set], cursor off
[ 1217.003198] [drm:intel_crtc_set_config], [CRTC:5] [FB:40] #connectors=1 (x y) (0 0)
[ 1217.003200] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 1217.003202] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:VGA-1] to [CRTC:3]
[ 1217.003204] [drm:intel_modeset_stage_output_state], [CONNECTOR:14:DP-1] to [CRTC:5]