[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.0-rc2_drm-intel-next-queued_13992e_20130925_+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #262 SMP Wed Sep 25 12:21:45 CST 2013 [ 0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2013_09_25/drm-intel-next-queued/13992eba94ab34220e8e754c5cd6beb89c96bd73/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2013_09_25/drm-intel-next-queued/13992eba94ab34220e8e754c5cd6beb89c96bd73/modules_x86_64/lib/modules/3.12.0-rc2_drm-intel-next-queued_13992e_20130925_+ [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000091bff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000091c00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9b4afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9b4b000-0x00000000da170fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da171000-0x00000000da3d7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da3d8000-0x00000000da3e3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da3e4000-0x00000000da3f0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da3f1000-0x00000000da3f5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da3f6000-0x00000000da438fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da439000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. OptiPlex 9010/03JR84, BIOS A01 05/04/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DBFFF write-protect [ 0.000000] DC000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 5 base 11F000000 mask FFF000000 uncachable [ 0.000000] 6 base 11E800000 mask FFF800000 uncachable [ 0.000000] 7 base 11E600000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fce10-0x000fce1f] mapped at [ffff8800000fce10] [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x058bf000, 0x058bffff] PGTABLE [ 0.000000] BRK [0x058c0000, 0x058c0fff] PGTABLE [ 0.000000] BRK [0x058c1000, 0x058c1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11e400000-0x11e5fffff] [ 0.000000] [mem 0x11e400000-0x11e5fffff] page 2M [ 0.000000] BRK [0x058c2000, 0x058c2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11e3fffff] [ 0.000000] [mem 0x11c000000-0x11e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x058c3000, 0x058c3fff] PGTABLE [ 0.000000] BRK [0x058c4000, 0x058c4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xd9b4afff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xd99fffff] page 2M [ 0.000000] [mem 0xd9a00000-0xd9b4afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xda439000-0xdaffffff] [ 0.000000] [mem 0xda439000-0xda5fffff] page 4k [ 0.000000] [mem 0xda600000-0xdaffffff] page 2M [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000da3d8078 00074 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000da3e1ac8 000F4 (v04 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000da3d8180 09944 (v02 DELL CBX3 00000117 INTL 20091112) [ 0.000000] ACPI: FACS 00000000da3eff80 00040 [ 0.000000] ACPI: APIC 00000000da3e1bc0 00072 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000da3e1c38 0003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000da3e1c78 00038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000da3e1cb0 00386 (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 00000000da3e2038 009B9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000da3e29f8 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR 00000000da3e3490 000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: ASF! 00000000da3e3548 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SLIC 00000000da3e35f0 00176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11e5fffff] [ 0.000000] NODE_DATA [mem 0x11e5f8000-0x11e5fbfff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff880119c00000-ffff88011dbfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00090fff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xd9b4afff] [ 0.000000] node 0: [mem 0xda439000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11e5fffff] [ 0.000000] On node 0 totalpages: 1018529 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3984 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13909 pages used for memmap [ 0.000000] DMA32 zone: 890129 pages, LIFO batch:31 [ 0.000000] Normal zone: 1944 pages used for memmap [ 0.000000] Normal zone: 124416 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9b4b000-0xda170fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda171000-0xda3d7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda3d8000-0xda3e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda3e4000-0xda3f0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda3f1000-0xda3f5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda3f6000-0xda438fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88011e200000 s74304 r8192 d24000 u524288 [ 0.000000] pcpu-alloc: s74304 r8192 d24000 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1002591 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2013_09_25/drm-intel-next-queued/13992eba94ab34220e8e754c5cd6beb89c96bd73/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2013_09_25/drm-intel-next-queued/13992eba94ab34220e8e754c5cd6beb89c96bd73/modules_x86_64/lib/modules/3.12.0-rc2_drm-intel-next-queued_13992e_20130925_+ [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3867408K/4074116K available (7239K kernel code, 699K rwdata, 3524K rodata, 62388K init, 584K bss, 206708K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.001000] tsc: Fast TSC calibration using PIT [ 0.002000] tsc: Detected 3292.446 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.89 BogoMIPS (lpj=3292446) [ 0.000188] pid_max: default: 32768 minimum: 301 [ 0.000293] Security Framework initialized [ 0.000555] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001501] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001970] Mount-cache hash table entries: 256 [ 0.002188] CPU: Physical Processor ID: 0 [ 0.002282] CPU: Processor Core ID: 0 [ 0.002645] mce: CPU supports 9 MCE banks [ 0.002747] CPU0: Thermal monitoring enabled (TM1) [ 0.002855] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 1 [ 0.003151] Freeing SMP alternatives memory: 32K (ffffffff85823000 - ffffffff8582b000) [ 0.003293] ACPI: Core revision 20130725 [ 0.006397] ACPI: All ACPI Tables successfully acquired [ 0.007048] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.017143] smpboot: CPU0: Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz (fam: 06, model: 3a, stepping: 09) [ 0.017414] TSC deadline timer enabled [ 0.017419] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.017771] ... version: 3 [ 0.017863] ... bit width: 48 [ 0.017953] ... generic registers: 8 [ 0.018045] ... value mask: 0000ffffffffffff [ 0.018136] ... max period: 0000ffffffffffff [ 0.018229] ... fixed-purpose events: 3 [ 0.018321] ... event mask: 00000007000000ff [ 0.029728] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.018517] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK [ 0.059602] Brought up 4 CPUs [ 0.059696] smpboot: Total of 4 processors activated (26339.56 BogoMIPS) [ 0.061923] devtmpfs: initialized [ 0.062186] PM: Registering ACPI NVS region [mem 0xda171000-0xda3d7fff] (2519040 bytes) [ 0.062348] PM: Registering ACPI NVS region [mem 0xda3e4000-0xda3f0fff] (53248 bytes) [ 0.062489] PM: Registering ACPI NVS region [mem 0xda3f6000-0xda438fff] (274432 bytes) [ 0.062693] xor: automatically using best checksumming function: [ 0.073957] avx : 25344.000 MB/sec [ 0.074073] RTC time: 2:44:12, date: 09/26/13 [ 0.074187] NET: Registered protocol family 16 [ 0.074473] cpuidle: using governor ladder [ 0.074567] cpuidle: using governor menu [ 0.074704] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.074845] ACPI: bus type PCI registered [ 0.075006] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.075147] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.077496] PCI: Using configuration type 1 for base access [ 0.077595] dmi type 0xB1 record - unknown flag [ 0.082684] bio: create slab at 0 [ 0.098974] raid6: sse2x1 8914 MB/s [ 0.115985] raid6: sse2x2 11078 MB/s [ 0.132991] raid6: sse2x4 12671 MB/s [ 0.133084] raid6: using algorithm sse2x4 (12671 MB/s) [ 0.133176] raid6: using ssse3x2 recovery algorithm [ 0.133297] ACPI: Added _OSI(Module Device) [ 0.133391] ACPI: Added _OSI(Processor Device) [ 0.133483] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.133575] ACPI: Added _OSI(Processor Aggregator Device) [ 0.134524] ACPI: EC: Look up EC in DSDT [ 0.135403] ACPI: Executed 1 blocks of module-level executable AML code [ 0.145290] ACPI: SSDT 00000000da118018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.145725] ACPI: Dynamic OEM Table Load: [ 0.145902] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.151211] ACPI: SSDT 00000000da119a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.151664] ACPI: Dynamic OEM Table Load: [ 0.151840] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.157156] ACPI: SSDT 00000000da11fc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.157587] ACPI: Dynamic OEM Table Load: [ 0.157763] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.162433] ACPI: Interpreter enabled [ 0.162530] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.162756] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.162991] ACPI: (supports S0 S3 S4 S5) [ 0.163084] ACPI: Using IOAPIC for interrupt routing [ 0.163205] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.163434] ACPI: No dock devices found. [ 0.192267] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.192452] \_SB_.PCI0:_OSC invalid UUID [ 0.192453] _OSC request data:1 8 0 [ 0.192481] \_SB_.PCI0:_OSC invalid UUID [ 0.192482] _OSC request data:1 1f 0 [ 0.192485] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.192626] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.193054] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.193221] PCI host bridge to bus 0000:00 [ 0.193317] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.193412] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.193507] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.193601] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.193697] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.193793] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.193889] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.193984] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.194085] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.194160] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 [ 0.194167] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.194172] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.194175] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.194264] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.194284] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.194349] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.194383] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.194518] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.194539] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c00f 64bit] [ 0.194610] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.194678] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002 [ 0.194695] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.194703] pci 0000:00:16.3: reg 0x14: [mem 0xf7c3a000-0xf7c3afff] [ 0.194832] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.194848] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.194855] pci 0000:00:19.0: reg 0x14: [mem 0xf7c39000-0xf7c39fff] [ 0.194863] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.194920] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.194954] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.195079] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.195098] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c38000-0xf7c383ff] [ 0.195181] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.195219] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.195349] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.195362] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.195424] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.195458] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.195591] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.195609] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c37000-0xf7c373ff] [ 0.195692] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.195729] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.195856] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.195927] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.196052] pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100 [ 0.196213] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 0.196229] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.196236] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.196243] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.196250] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.196257] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.196265] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c36000-0xf7c367ff] [ 0.196305] pci 0000:00:1f.2: PME# supported from D3hot [ 0.196367] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.196381] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c35000-0xf7c350ff 64bit] [ 0.196400] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.196535] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 0.196633] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.196634] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.196635] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.196637] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.196638] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.196639] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.196641] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode) [ 0.196977] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.197540] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.198252] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 0.198917] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.199504] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.200092] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200803] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.201394] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.202085] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.202265] ACPI: \_SB_.PCI0: notify handler is installed [ 0.202300] Found 1 acpi root devices [ 0.202380] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.202522] vgaarb: loaded [ 0.202612] vgaarb: bridge control possible 0000:00:02.0 [ 0.202774] SCSI subsystem initialized [ 0.202922] libata version 3.00 loaded. [ 0.202972] ACPI: bus type USB registered [ 0.203096] usbcore: registered new interface driver usbfs [ 0.203206] usbcore: registered new interface driver hub [ 0.203323] usbcore: registered new device driver usb [ 0.203466] pps_core: LinuxPPS API ver. 1 registered [ 0.203562] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.203713] PTP clock support registered [ 0.203871] PCI: Using ACPI for IRQ routing [ 0.205406] PCI: pci_cache_line_size set to 64 bytes [ 0.205437] e820: reserve RAM buffer [mem 0x00091c00-0x0009ffff] [ 0.205438] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.205439] e820: reserve RAM buffer [mem 0xd9b4b000-0xdbffffff] [ 0.205440] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.205441] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff] [ 0.205532] NetLabel: Initializing [ 0.205625] NetLabel: domain hash size = 128 [ 0.205716] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.205814] NetLabel: unlabeled traffic allowed by default [ 0.205966] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.206436] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.208545] Switched to clocksource hpet [ 0.208678] pnp: PnP ACPI init [ 0.208771] ACPI: bus type PNP registered [ 0.208924] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.209020] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.209026] pnp 00:01: [dma 4] [ 0.209053] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.209085] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.209171] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.209216] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.209309] system 00:04: [io 0x0200-0x020f] has been reserved [ 0.209405] system 00:04: [io 0xffff] has been reserved [ 0.209499] system 00:04: [io 0xffff] has been reserved [ 0.209608] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.209704] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.209799] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.209893] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.209987] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.210030] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.210077] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.210174] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.210255] system 00:07: [io 0x0a40-0x0a4f] has been reserved [ 0.210350] system 00:07: [io 0x0a00-0x0a3f] has been reserved [ 0.210445] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.210497] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.210604] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.210645] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.211132] pnp 00:0a: [dma 0 disabled] [ 0.211183] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.211348] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.211446] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.211542] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.211646] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.211742] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.211839] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.211934] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.212029] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.212125] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.212220] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.212315] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.212410] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.212556] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 0.212654] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved [ 0.212748] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.212756] pnp: PnP ACPI: found 13 devices [ 0.212848] ACPI: bus type PNP unregistered [ 0.220463] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.220573] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.220574] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.220576] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.220577] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff] [ 0.220578] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff] [ 0.220579] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff] [ 0.220581] pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xfeafffff] [ 0.220582] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.220583] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.220584] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.220586] pci_bus 0000:01: resource 7 [mem 0x000dc000-0x000dffff] [ 0.220587] pci_bus 0000:01: resource 8 [mem 0x000e0000-0x000e3fff] [ 0.220588] pci_bus 0000:01: resource 9 [mem 0x000e4000-0x000e7fff] [ 0.220589] pci_bus 0000:01: resource 10 [mem 0xdfa00000-0xfeafffff] [ 0.220606] NET: Registered protocol family 2 [ 0.220803] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.221021] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.221177] TCP: Hash tables configured (established 32768 bind 32768) [ 0.221283] TCP: reno registered [ 0.221381] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.221485] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.221638] NET: Registered protocol family 1 [ 0.221774] RPC: Registered named UNIX socket transport module. [ 0.221867] RPC: Registered udp transport module. [ 0.221960] RPC: Registered tcp transport module. [ 0.222050] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.222149] pci 0000:00:02.0: Boot video device [ 0.222489] PCI: CLS 64 bytes, default 64 [ 0.257169] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.257272] software IO TLB [mem 0xd5b4b000-0xd9b4b000] (64MB) mapped at [ffff8800d5b4b000-ffff8800d9b4afff] [ 0.258348] audit: initializing netlink socket (disabled) [ 0.258453] type=2000 audit(1380163452.250:1): initialized [ 0.275939] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.278288] VFS: Disk quotas dquot_6.5.2 [ 0.278427] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.279470] NFS: Registering the id_resolver key type [ 0.279579] Key type id_resolver registered [ 0.279673] Key type id_legacy registered [ 0.279766] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.280042] fuse init (API version 7.22) [ 0.280505] bio: create slab at 1 [ 0.280785] Btrfs loaded [ 0.280879] msgmni has been set to 7553 [ 0.281226] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.281365] io scheduler noop registered [ 0.281456] io scheduler deadline registered [ 0.281614] io scheduler cfq registered (default) [ 0.281810] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.282093] ACPI: Requesting acpi_cpufreq [ 0.290787] Monitor-Mwait will be used to enter C-1 state [ 0.290790] Monitor-Mwait will be used to enter C-2 state [ 0.290792] Monitor-Mwait will be used to enter C-3 state [ 0.290801] ACPI: acpi_idle registered with cpuidle [ 0.296667] ACPI: Invalid active0 threshold [ 0.297027] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.297124] ACPI: Thermal Zone [TZ00] (28 C) [ 0.297436] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.297534] ACPI: Thermal Zone [TZ01] (30 C) [ 0.297841] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.318831] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.341494] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.342481] Non-volatile memory driver v1.3 [ 0.342602] Linux agpgart interface v0.103 [ 0.344652] brd: module loaded [ 0.344993] Loading iSCSI transport class v2.0-870. [ 0.345690] iscsi: registered transport (tcp) [ 0.345907] Adaptec aacraid driver 1.2-0[30200]-ms [ 0.346047] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.346292] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k. [ 0.346494] iscsi: registered transport (qla4xxx) [ 0.346654] QLogic iSCSI HBA Driver [ 0.346841] DC390: clustering now enabled by default. If you get problems load [ 0.346978] with "disable_clustering=1" and report to maintainers [ 0.347150] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.347324] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.347444] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.347633] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.347816] osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.348140] SCSI Media Changer driver v0.25 [ 0.348289] ahci 0000:00:1f.2: version 3.0 [ 0.348379] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 0.348423] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode [ 0.348571] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.348716] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.351736] scsi0 : ahci [ 0.351915] scsi1 : ahci [ 0.352080] scsi2 : ahci [ 0.352248] scsi3 : ahci [ 0.352415] scsi4 : ahci [ 0.352591] scsi5 : ahci [ 0.352743] ata1: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36100 irq 40 [ 0.352881] ata2: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36180 irq 40 [ 0.353016] ata3: DUMMY [ 0.353106] ata4: DUMMY [ 0.353194] ata5: DUMMY [ 0.353284] ata6: DUMMY [ 0.355320] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013) [ 0.355481] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11) [ 0.355742] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.355836] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.355964] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.356059] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.356188] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.356281] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 0.356445] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.356483] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.356656] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 0.557794] e1000e 0000:00:19.0 eth0: registered PHC clock [ 0.557893] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:f9:dd:71:a3:0d [ 0.558031] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.558159] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1011FF-0FF [ 0.558367] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 0.558466] igb: Copyright (c) 2007-2013 Intel Corporation. [ 0.558827] usbcore: registered new interface driver zd1201 [ 0.559010] usbcore: registered new interface driver catc [ 0.559221] usbcore: registered new interface driver kaweth [ 0.559314] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.559532] usbcore: registered new interface driver pegasus [ 0.559742] usbcore: registered new interface driver rtl8150 [ 0.559911] usbcore: registered new interface driver asix [ 0.560051] usbcore: registered new interface driver ax88179_178a [ 0.560193] usbcore: registered new interface driver cdc_ether [ 0.560313] usbcore: registered new interface driver r815x [ 0.560434] usbcore: registered new interface driver dm9601 [ 0.560564] usbcore: registered new interface driver gl620a [ 0.560701] usbcore: registered new interface driver net1080 [ 0.560839] usbcore: registered new interface driver plusb [ 0.560978] usbcore: registered new interface driver rndis_host [ 0.561119] usbcore: registered new interface driver cdc_subset [ 0.561242] usbcore: registered new interface driver zaurus [ 0.561362] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.561529] usbcore: registered new interface driver cdc_ncm [ 0.561923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.562018] ehci-pci: EHCI PCI platform driver [ 0.562181] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.562186] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.562345] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.562493] ehci-pci 0000:00:1a.0: debug port 2 [ 0.566476] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.566488] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c38000 [ 0.572556] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.572680] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.572775] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.572913] usb usb1: Product: EHCI Host Controller [ 0.573005] usb usb1: Manufacturer: Linux 3.12.0-rc2_drm-intel-next-queued_13992e_20130925_+ ehci_hcd [ 0.573145] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.573403] hub 1-0:1.0: USB hub found [ 0.573499] hub 1-0:1.0: 3 ports detected [ 0.573741] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.573745] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.573954] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.574101] ehci-pci 0000:00:1d.0: debug port 2 [ 0.578072] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.578083] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c37000 [ 0.583554] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.583680] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.583778] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.583914] usb usb2: Product: EHCI Host Controller [ 0.584007] usb usb2: Manufacturer: Linux 3.12.0-rc2_drm-intel-next-queued_13992e_20130925_+ ehci_hcd [ 0.584147] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.584448] hub 2-0:1.0: USB hub found [ 0.584549] hub 2-0:1.0: 3 ports detected [ 0.584966] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.585064] ohci-pci: OHCI PCI platform driver [ 0.585244] uhci_hcd: USB Universal Host Controller Interface driver [ 0.585472] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.585475] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.585764] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.585986] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.586002] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 0.586048] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.586145] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.586282] usb usb3: Product: xHCI Host Controller [ 0.586375] usb usb3: Manufacturer: Linux 3.12.0-rc2_drm-intel-next-queued_13992e_20130925_+ xhci_hcd [ 0.586515] usb usb3: SerialNumber: 0000:00:14.0 [ 0.586841] hub 3-0:1.0: USB hub found [ 0.586939] hub 3-0:1.0: 4 ports detected [ 0.587239] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.587401] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.587565] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.587663] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.587800] usb usb4: Product: xHCI Host Controller [ 0.587893] usb usb4: Manufacturer: Linux 3.12.0-rc2_drm-intel-next-queued_13992e_20130925_+ xhci_hcd [ 0.588032] usb usb4: SerialNumber: 0000:00:14.0 [ 0.588281] hub 4-0:1.0: USB hub found [ 0.588378] hub 4-0:1.0: 4 ports detected [ 0.601890] usbcore: registered new interface driver usb-storage [ 0.602423] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.605493] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.605603] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.606033] mousedev: PS/2 mouse device common for all mice [ 0.606291] rtc_cmos 00:05: RTC can wake from S4 [ 0.606578] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.606700] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.606940] i2c /dev entries driver [ 0.607139] hidraw: raw HID events driver (C) Jiri Kosina [ 0.607749] usbcore: registered new interface driver usbhid [ 0.607843] usbhid: USB HID core driver [ 0.608025] TCP: cubic registered [ 0.608118] Initializing XFRM netlink socket [ 0.608212] NET: Registered protocol family 17 [ 0.608317] Key type dns_resolver registered [ 0.608781] PM: Hibernation image not present or could not be loaded. [ 0.608788] registered taskstats version 1 [ 0.609039] Magic number: 13:864:713 [ 0.609193] Warning: unable to open an initial console. [ 0.657585] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.657713] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.658809] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 0.658814] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 0.658975] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.659120] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 0.659123] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 0.659264] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.659452] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 0.659658] ata2.00: ATAPI: TSSTcorp DVD+/-RW SH-216AB, D300, max UDMA/100 [ 0.659759] ata2.00: applying bridge limits [ 0.661131] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 0.661137] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 0.661292] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.661689] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 0.663579] ata2.00: configured for UDMA/100 [ 0.669427] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133 [ 0.669544] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.678988] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 0.678994] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 0.679149] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.679405] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 0.689421] ata1.00: configured for UDMA/133 [ 0.691756] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5 [ 0.692436] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 0.692682] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.692806] sd 0:0:0:0: [sda] Write Protect is off [ 0.692808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.692843] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.693303] sda: sda1 sda2 [ 0.693851] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW SH-216AB D300 PQ: 0 ANSI: 5 [ 0.693922] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.696902] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.697042] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.697396] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.697466] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 0.704259] Freeing unused kernel memory: 62388K (ffffffff81b36000 - ffffffff85823000) [ 0.728186] dracut: dracut-018-35.git20120510.fc17 [ 0.746761] udevd[1242]: starting version 182 [ 0.756160] [drm] Initialized drm 1.1.0 20060810 [ 0.756680] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.756920] ACPI: Power Button [PWRB] [ 0.757173] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.757394] ACPI: Power Button [PWRF] [ 0.760066] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0152 flags=need_gfx_hws,is_ivybridge,has_force_wake,has_hotplug,has_bsd_ring,has_blt_ring,has_llc, [ 0.760271] [drm] Memory usable by graphics device = 2048M [ 0.760383] [drm:i915_gem_gtt_init], GMADR size = 256M [ 0.760384] [drm:i915_gem_gtt_init], GTT stolen size = 64M [ 0.760388] i915 0000:00:02.0: setting latency timer to 64 [ 0.771572] [drm:intel_detect_pch], Found PatherPoint PCH [ 0.772628] [drm:intel_opregion_setup], graphic opregion physical addr: 0xda3ec018 [ 0.772633] [drm:intel_opregion_setup], SWSCI supported [ 0.778575] [drm:swsci_setup], SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241 [ 0.778621] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 0.778627] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.778725] [drm] Driver supports precise vblank timestamp query. [ 0.778820] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 0.778822] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd [ 0.778823] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 0.778825] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 0.778827] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 0.778828] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 0.778830] [drm:parse_lfp_panel_data], VBT initial LVDS value 300 [ 0.778832] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 0.778833] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 0.778835] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 0.778836] [drm:parse_mipi], No MIPI BDB found [ 0.778839] [drm:intel_dsm_pci_probe], [ 0.778840] no _DSM method for intel device [ 0.778933] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at dba00000 [ 0.778959] [drm:intel_print_wm_latency], Primary WM0 latency 6 (0.6 usec) [ 0.778961] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec) [ 0.778962] [drm:intel_print_wm_latency], Primary WM2 latency 16 (8.0 usec) [ 0.778963] [drm:intel_print_wm_latency], Primary WM3 latency 32 (16.0 usec) [ 0.778964] [drm:intel_print_wm_latency], Sprite WM0 latency 6 (0.6 usec) [ 0.778965] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec) [ 0.778966] [drm:intel_print_wm_latency], Sprite WM2 latency 16 (8.0 usec) [ 0.778967] [drm:intel_print_wm_latency], Sprite WM3 latency 32 (16.0 usec) [ 0.778968] [drm:intel_print_wm_latency], Cursor WM0 latency 6 (0.6 usec) [ 0.778969] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec) [ 0.778970] [drm:intel_print_wm_latency], Cursor WM2 latency 16 (8.0 usec) [ 0.778971] [drm:intel_print_wm_latency], Cursor WM3 latency 64 (32.0 usec) [ 0.778973] [drm:intel_modeset_init], 3 display pipes available. [ 0.778981] [drm:intel_shared_dpll_init], 2 shared PLLs initialized [ 0.779286] [drm:intel_lvds_init], LVDS is not present in VBT [ 0.779433] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 0.779957] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 0.779959] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 0.780098] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 0.780191] [drm:intel_dp_init_connector], Adding DP connector on port B [ 0.780249] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 0.782710] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f [ 0.782720] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.785166] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f [ 0.785171] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.785332] [drm:intel_dp_init_connector], Adding DP connector on port C [ 0.785394] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 0.787842] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f [ 0.787847] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.790288] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f [ 0.790293] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.790388] [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0 has_ck505 0 [ 0.790392] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000] [ 0.792075] [drm:init_status_page], render ring hws offset: 0x00000000 [ 0.793570] [drm:init_pipe_control], render ring pipe control offset: 0x00021000 [ 0.793582] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 0.793638] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 0.793680] [drm:create_default_context], Default HW context loaded [ 0.793681] [drm:i915_gem_context_init], HW context support initialized [ 0.793707] [drm] Wrong MCH_SSKPD value: 0x20100406 [ 0.793800] [drm] This can cause pipe underruns and display issues. [ 0.793894] [drm] Please upgrade your BIOS to fix this. [ 0.793996] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 0.793997] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled [ 0.793998] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled [ 0.794004] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1, on 1 [ 0.794008] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0, on 0 [ 0.794012] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: enabled, pipe=0 [ 0.794015] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0 [ 0.794018] [drm:intel_modeset_readout_hw_state], [ENCODER:15:TMDS-15] hw state readout: disabled, pipe=0 [ 0.794021] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe=0 [ 0.794023] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0 [ 0.794026] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: enabled [ 0.794029] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:HDMI-A-1] hw state readout: disabled [ 0.794032] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:DP-1] hw state readout: disabled [ 0.794034] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: disabled [ 0.794037] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:DP-2] hw state readout: disabled [ 0.794039] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 0.794040] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 0.794041] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 0.794042] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 1, gmch_m: 2639615, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64 [ 0.794043] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.794045] [drm:intel_dump_pipe_config], requested mode: [ 0.794046] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0 [ 0.794047] [drm:intel_dump_pipe_config], adjusted mode: [ 0.794048] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 28200 0 0 0 0 0 0 0 0 0x0 0x6 [ 0.794050] [drm:intel_dump_crtc_timings], crtc timings: 28200 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6 [ 0.794051] [drm:intel_dump_pipe_config], port clock: 28200 [ 0.794052] [drm:intel_dump_pipe_config], pipe src size: 720x400 [ 0.794053] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 0.794054] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x02d00190, enabled [ 0.794055] [drm:intel_dump_pipe_config], ips: 0 [ 0.794056] [drm:intel_dump_pipe_config], double wide: 0 [ 0.794057] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B [ 0.794058] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 0.794059] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 0.794060] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.794061] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.794062] [drm:intel_dump_pipe_config], requested mode: [ 0.794063] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.794065] [drm:intel_dump_pipe_config], adjusted mode: [ 0.794066] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.794067] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 0.794068] [drm:intel_dump_pipe_config], port clock: 0 [ 0.794069] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 0.794070] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 0.794071] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.794072] [drm:intel_dump_pipe_config], ips: 0 [ 0.794073] [drm:intel_dump_pipe_config], double wide: 0 [ 0.794074] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C [ 0.794075] [drm:intel_dump_pipe_config], cpu_transcoder: C [ 0.794076] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 0.794077] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.794078] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.794079] [drm:intel_dump_pipe_config], requested mode: [ 0.794080] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.794081] [drm:intel_dump_pipe_config], adjusted mode: [ 0.794082] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.794083] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 0.794085] [drm:intel_dump_pipe_config], port clock: 0 [ 0.794086] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 0.794086] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 0.794087] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.794088] [drm:intel_dump_pipe_config], ips: 0 [ 0.794089] [drm:intel_dump_pipe_config], double wide: 0 [ 0.794094] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1] [ 0.794100] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 0.794102] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 0.794105] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 0.794108] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 0.794110] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 0.794113] [drm:check_crtc_state], [CRTC:3] [ 0.794125] [drm:check_crtc_state], [CRTC:5] [ 0.794126] [drm:check_crtc_state], [CRTC:7] [ 0.794127] [drm:check_shared_dpll_state], PCH DPLL A [ 0.794131] [drm:check_shared_dpll_state], PCH DPLL B [ 0.794136] [drm:intel_crt_reset], pch crt adpa set to 0x80f40010 [ 0.794144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 0.794146] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 0.794148] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x83f40010 [ 0.802548] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 1 - cnt: 0 [ 0.803560] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x80f40010, result 0 [ 0.803565] [drm:intel_crt_detect], CRT not detected via hotplug [ 0.803738] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 0.803742] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 0.803744] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 0.803746] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 0.804177] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 0.804178] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 0.804179] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 0.804180] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 0.804182] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 0.804183] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 0.804352] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 0.804358] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 0.804361] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 0.804365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 0.804367] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 0.804371] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 0.804373] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 0.804383] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 0.804560] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 0.804563] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 0.804565] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 0.804568] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] [ 0.804570] [drm:intel_dp_detect], [CONNECTOR:20:DP-2] [ 0.804576] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected [ 0.804580] i915 0000:00:02.0: No connectors reported connected with modes [ 0.804688] [drm:drm_setup_crtcs], [ 0.804689] [drm:drm_enable_connectors], connector 9 enabled? no [ 0.804690] [drm:drm_enable_connectors], connector 12 enabled? no [ 0.804691] [drm:drm_enable_connectors], connector 16 enabled? no [ 0.804692] [drm:drm_enable_connectors], connector 18 enabled? no [ 0.804692] [drm:drm_enable_connectors], connector 20 enabled? no [ 0.804694] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 0.804695] [drm] Cannot find any crtc or sizes - going 1024x768 [ 0.804791] [drm:i915_gem_object_create_stolen], creating stolen object: size=300000 [ 0.804793] [drm:i915_pages_create_for_stolen], offset=0x0, size=3145728 [ 0.805258] [drm:intelfb_create], allocated 1024x768 fb: 0x00072000, bo ffff8800dabce000 [ 0.805405] fbcon: inteldrmfb (fb0) is primary device [ 0.806355] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 0.806357] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 0.806358] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [NOCRTC] [ 0.806358] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 0.806359] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 0.806360] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [ 0.831582] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3 [ 0.831589] [drm:intel_disable_shared_dpll], disabling PCH DPLL A [ 0.832012] [drm:ivb_modeset_global_resources], disabling fdi C rx [ 0.832017] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 0.832020] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 0.832021] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 0.832023] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 0.832025] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 0.832027] [drm:check_crtc_state], [CRTC:3] [ 0.832027] [drm:check_crtc_state], [CRTC:5] [ 0.832028] [drm:check_crtc_state], [CRTC:7] [ 0.832029] [drm:check_shared_dpll_state], PCH DPLL A [ 0.832033] [drm:check_shared_dpll_state], PCH DPLL B [ 0.832036] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 0.832037] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 0.832038] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 0.832039] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 0.833810] Console: switching to colour frame buffer device 128x48 [ 0.835620] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 0.835645] i915 0000:00:02.0: registered panic notifier [ 0.835666] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io:owns=io [ 0.841107] acpi device:4a: registered as cooling_device4 [ 0.841228] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.841382] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.841574] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 0.844574] dracut: Starting plymouth daemon [ 0.853863] [drm:i915_driver_open], [ 0.853872] [drm:intel_crtc_cursor_set], cursor off [ 0.853874] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 0.853876] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 0.853877] [drm:intel_crtc_cursor_set], cursor off [ 0.853878] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 0.853879] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 0.853880] [drm:intel_crtc_cursor_set], cursor off [ 0.853881] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 0.853882] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 0.853887] [drm:i915_driver_open], [ 0.853890] [drm:intel_crtc_cursor_set], cursor off [ 0.853890] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 0.853891] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 0.853893] [drm:intel_crtc_cursor_set], cursor off [ 0.853893] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 0.853894] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 0.853895] [drm:intel_crtc_cursor_set], cursor off [ 0.853896] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 0.853897] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 0.853900] [drm:i915_driver_open], [ 0.853933] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[5] [ 0.853935] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[5] [ 0.853940] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 0.853941] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 0.853943] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 0.853948] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 0.853949] [drm:intel_crt_detect], CRT not detected via hotplug [ 0.854117] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 0.854121] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 0.854123] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 0.854125] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 0.854560] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 0.854561] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 0.854562] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 0.854563] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 0.854566] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 0.854567] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 0.854568] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 0.854573] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 0.854574] [drm:intel_crt_detect], CRT not detected via hotplug [ 0.854740] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 0.854743] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 0.854745] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 0.854746] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 0.855187] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 0.855188] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 0.855189] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 0.855190] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 0.855192] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 0.855194] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 0.855195] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 0.855355] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 0.855357] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 0.855360] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 0.855363] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 0.855365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 0.855367] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 0.855537] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 0.855539] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 0.855542] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 0.855546] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 0.855548] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 0.855551] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 0.855554] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 0.855557] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 0.855559] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 0.855561] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 0.855564] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 0.855567] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 0.855569] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 0.855571] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 0.855743] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 0.855745] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 0.855748] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 0.855751] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 0.855753] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 0.855755] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 0.855916] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 0.855918] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 0.855921] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 0.855924] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 0.855927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] [ 0.855929] [drm:intel_dp_detect], [CONNECTOR:20:DP-2] [ 0.855935] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected [ 0.855937] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 0.855939] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] [ 0.855941] [drm:intel_dp_detect], [CONNECTOR:20:DP-2] [ 0.855955] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected [ 0.855972] [drm:intel_crtc_cursor_set], cursor off [ 0.855973] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 0.855974] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 0.855975] [drm:intel_crtc_cursor_set], cursor off [ 0.855976] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 0.855977] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 0.855978] [drm:intel_crtc_cursor_set], cursor off [ 0.855979] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 0.855980] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 0.875587] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.911100] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 0.911163] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.911207] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 0.911261] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.911301] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 0.911357] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.911400] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.911764] iTCO_vendor_support: vendor-support=0 [ 0.911939] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 0.911981] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 0.912662] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 0.913164] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 0.915202] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 0.921394] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 0.922393] hda_codec: ALC269VB: SKU not ready 0x411111f0 [ 0.923765] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 0.923767] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 0.923768] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 0.923769] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 0.923770] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 0.923772] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x19 [ 0.923773] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x18 [ 0.923775] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d [ 0.923775] ALSA sound/pci/hda/patch_realtek.c:574 realtek: Enable default setup for auto mode as fallback [ 0.932066] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251) [ 0.933694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.946424] kjournald starting. Commit interval 5 seconds [ 0.946448] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 0.958441] dracut: Checking ext3: /dev/sda2 [ 0.959463] dracut: issuing e2fsck -a /dev/sda2 [ 0.971565] dracut: /dev/sda2: clean, 598778/7200768 files, 7115824/28791808 blocks [ 0.972772] dracut: Remounting /dev/sda2 with -o ro [ 0.976301] kjournald starting. Commit interval 5 seconds [ 0.976325] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 0.978218] dracut: Mounted root filesystem /dev/sda2 [ 0.986094] device-mapper: uevent: version 1.0.3 [ 0.987303] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 0.991888] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.992979] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.994284] hub 1-1:1.0: USB hub found [ 0.995498] hub 1-1:1.0: 6 ports detected [ 1.003242] dracut: Switching root [ 1.039116] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 1.043576] systemd[1]: Failed to insert module 'ipv6' [ 1.043779] systemd[1]: Set hostname to . [ 1.058125] LVM: Logical Volume autoactivation enabled. [ 1.059245] LVM: Activation generator successfully completed. [ 1.097719] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 1.098876] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.100000] systemd[1]: Starting Syslog Socket. [ 1.100570] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.102202] systemd[1]: Listening on Syslog Socket. [ 1.103391] systemd[1]: Starting Replay Read-Ahead Data... [ 1.105662] systemd[1]: Starting Collect Read-Ahead Data... [ 1.107059] systemd-readahead[2324]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 1.109665] systemd[1]: Starting Delayed Shutdown Socket. [ 1.110266] systemd-readahead[2325]: Failed to create fanotify object: Function not implemented [ 1.112466] systemd[1]: Listening on Delayed Shutdown Socket. [ 1.112480] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 1.114507] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.114542] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 1.116560] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.116575] systemd[1]: Starting Journal Socket. [ 1.119552] systemd[1]: Listening on Journal Socket. [ 1.119576] systemd[1]: Mounting Debug File System... [ 1.121688] systemd[1]: Starting Journal Service... [ 1.124359] systemd[1]: Started Journal Service. [ 1.124614] systemd[1]: Starting Create static device nodes in /dev... [ 1.127457] systemd[1]: Starting udev Kernel Socket. [ 1.129141] systemd[1]: Listening on udev Kernel Socket. [ 1.129186] systemd[1]: Starting udev Control Socket. [ 1.131063] systemd[1]: Listening on udev Control Socket. [ 1.131110] systemd[1]: Starting udev Coldplug all Devices... [ 1.134052] systemd[1]: Starting Encrypted Volumes. [ 1.135710] systemd[1]: Reached target Encrypted Volumes. [ 1.135727] systemd[1]: Mounting POSIX Message Queue File System... [ 1.137850] systemd[1]: Mounting Huge Pages File System... [ 1.139688] systemd[1]: Starting LVM2 metadata daemon socket. [ 1.141395] systemd[1]: Listening on LVM2 metadata daemon socket. [ 1.141408] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 1.143283] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 1.143295] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 1.145422] systemd[1]: Expecting device dev-disk-by\x2duuid-a80a5e7e\x2dffe6\x2d4e47\x2db9ee\x2d71d020959c0e.device... [ 1.147213] systemd[1]: Mounting Temporary Directory... [ 1.149966] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 1.151298] systemd[1]: Started Replay Read-Ahead Data. [ 1.151477] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE [ 1.153394] systemd[1]: Started Collect Read-Ahead Data. [ 1.155720] systemd[1]: Mounted Debug File System. [ 1.157740] systemd[1]: Started Create static device nodes in /dev. [ 1.158766] systemd[1]: Mounted POSIX Message Queue File System. [ 1.160711] systemd[1]: Mounted Huge Pages File System. [ 1.161745] systemd[1]: Mounted Temporary Directory. [ 1.161916] systemd[1]: Starting udev Kernel Device Manager... [ 1.165072] systemd[1]: Starting Load legacy module configuration... [ 1.166086] systemd-udevd[2826]: starting version 204 [ 1.168234] systemd[1]: Started File System Check on Root Device. [ 1.168258] systemd[1]: Starting Remount Root and Kernel File Systems... [ 1.171975] systemd[1]: Started Load Kernel Modules. [ 1.172000] systemd[1]: Mounting FUSE Control File System... [ 1.174349] systemd[1]: Mounted Configuration File System. [ 1.174372] systemd[1]: Starting Setup Virtual Console... [ 1.177713] systemd[1]: Starting Apply Kernel Variables... [ 1.178670] EXT3-fs (sda2): using internal journal [ 1.181055] systemd[1]: Started Set Up Additional Binary Formats. [ 1.182598] systemd[1]: Started udev Kernel Device Manager. [ 1.183588] systemd[1]: Mounted FUSE Control File System. [ 1.185589] systemd[1]: Started Load legacy module configuration. [ 1.186613] systemd[1]: Started Remount Root and Kernel File Systems. [ 1.189068] systemd[1]: Started Apply Kernel Variables. [ 1.190228] systemd[1]: Starting Local File Systems (Pre). [ 1.192112] systemd[1]: Reached target Local File Systems (Pre). [ 1.192130] systemd[1]: Starting Configure read-only root support... [ 1.194412] systemd[1]: Started Import network configuration from initramfs. [ 1.194506] systemd[1]: Starting LVM2 metadata daemon... [ 1.198021] systemd[1]: Started udev Coldplug all Devices. [ 1.217020] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.217021] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.219744] hub 2-1:1.0: USB hub found [ 1.219995] hub 2-1:1.0: 8 ports detected [ 1.250215] type=1305 audit(1380163453.242:2): audit_pid=3187 old=0 auid=4294967295 ses=4294967295 res=1 [ 1.256615] systemd-udevd[3073]: renamed network interface em1 to eno1 [ 1.257531] tsc: Refined TSC clocksource calibration: 3292.520 MHz [ 1.287448] Adding 2047996k swap on /dev/sda1. Priority:-1 extents:1 across:2047996k SS [ 1.293473] traps: alsactl[3228] general protection ip:372a048c39 sp:7fffb1c17550 error:0 in libc-2.17.so[372a000000+1b5000] [ 1.653626] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 1.754630] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 2.257670] Switched to clocksource tsc [ 2.713832] [drm:intel_enable_rc6], RC6 and deep RC6 enabled [ 2.713835] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 2.717501] [drm:gen6_enable_rps], Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz [ 4.890728] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 4.891351] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO [ 5.109525] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 1 - cnt: 0 [ 5.109554] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 5.109558] [drm:i915_hotplug_work_func], Connector VGA-1 (pin 1) received hotplug event. [ 5.109561] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=0 [ 5.109568] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40010, result 1 [ 5.109579] [drm:intel_crt_detect], CRT detected via hotplug [ 5.109580] [drm:intel_hpd_irq_event], [CONNECTOR:9:VGA-1] status updated from disconnected to connected [ 5.109641] [drm:drm_fb_helper_hotplug_event], [ 5.109643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 5.109645] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 5.109649] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x3f40010, result 1 [ 5.109651] [drm:intel_crt_detect], CRT detected via hotplug [ 5.109810] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 5.109813] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 5.109814] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.109815] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.110247] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 5.110248] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.110255] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes : [ 5.110256] [drm:drm_mode_debug_printmodeline], Modeline 26:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.110258] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 5.110260] [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 5.110262] [drm:drm_mode_debug_printmodeline], Modeline 25:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 5.110263] [drm:drm_mode_debug_printmodeline], Modeline 22:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 5.110265] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 5.110267] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 5.110437] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 5.110444] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 5.110446] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 5.110448] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 5.110449] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 5.110455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 5.110456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 5.110457] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 5.110616] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 5.110618] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 5.110619] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 5.110620] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] [ 5.110622] [drm:intel_dp_detect], [CONNECTOR:20:DP-2] [ 5.110627] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected [ 5.110628] [drm:drm_setup_crtcs], [ 5.110629] [drm:drm_enable_connectors], connector 9 enabled? yes [ 5.110631] [drm:drm_enable_connectors], connector 12 enabled? no [ 5.110631] [drm:drm_enable_connectors], connector 16 enabled? no [ 5.110632] [drm:drm_enable_connectors], connector 18 enabled? no [ 5.110633] [drm:drm_enable_connectors], connector 20 enabled? no [ 5.110634] [drm:drm_target_preferred], looking for cmdline mode on connector 9 [ 5.110635] [drm:drm_target_preferred], looking for preferred mode on connector 9 [ 5.110636] [drm:drm_target_preferred], found mode 1024x768 [ 5.110637] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 5.110639] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3 [ 5.110641] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0) [ 5.110643] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 5.110644] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 5.110645] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.110647] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.110649] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 [ 5.110650] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 5.110652] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 5.110653] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 5.110654] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 5.110656] [drm:connected_sink_compute_bpp], [CONNECTOR:9:VGA-1] checking for sink bpp constrains [ 5.110658] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 1 [ 5.110659] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 5.110660] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 5.110661] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 5.110662] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 5.110663] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64 [ 5.110665] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.110667] [drm:intel_dump_pipe_config], requested mode: [ 5.110667] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.110669] [drm:intel_dump_pipe_config], adjusted mode: [ 5.110670] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.110672] [drm:intel_dump_crtc_timings], crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa [ 5.110673] [drm:intel_dump_pipe_config], port clock: 65000 [ 5.110674] [drm:intel_dump_pipe_config], pipe src size: 1024x768 [ 5.110675] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.110677] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.110678] [drm:intel_dump_pipe_config], ips: 0 [ 5.110679] [drm:intel_dump_pipe_config], double wide: 0 [ 5.110686] [drm:ivb_modeset_global_resources], disabling fdi C rx [ 5.110696] [drm:intel_get_shared_dpll], CRTC:3 allocated PCH DPLL A [ 5.110698] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A [ 5.110699] [drm:intel_get_shared_dpll], setting up PCH DPLL A [ 5.110710] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 4096 [ 5.110713] [drm:intel_crtc_mode_set], [ENCODER:10:DAC-10] set [MODE:0:1024x768] [ 5.111251] [drm:ivybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 6 [ 5.111253] [drm:ironlake_check_srwm], watermark 1: display plane 11, fbc lines 3, cursor 6 [ 5.111254] [drm:ironlake_check_srwm], watermark 2: display plane 35, fbc lines 3, cursor 6 [ 5.111255] [drm:ironlake_check_srwm], watermark 3: display plane 66, fbc lines 4, cursor 6 [ 5.111256] [drm:ironlake_check_srwm], watermark 3: display plane 130, fbc lines 5, cursor 10 [ 5.162450] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 5.214450] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 5.214616] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR before link train 0x700 [ 5.214625] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x700 [ 5.214627] [drm:ivb_manual_fdi_link_train], FDI train 1 done, level 0. [ 5.214634] [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600 [ 5.214636] [drm:ivb_manual_fdi_link_train], FDI train 2 done, level 0. [ 5.214637] [drm:ivb_manual_fdi_link_train], FDI train done. [ 5.214640] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3 [ 5.214641] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A [ 5.232773] [drm:cpt_serr_int_handler], PCH transcoder A FIFO underrun [ 5.234456] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1] [ 5.234468] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 5.234473] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 5.234477] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 5.234480] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 5.234484] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 5.234498] [drm:check_crtc_state], [CRTC:3] [ 5.234510] [drm:check_crtc_state], [CRTC:5] [ 5.234511] [drm:check_crtc_state], [CRTC:7] [ 5.234512] [drm:check_shared_dpll_state], PCH DPLL A [ 5.234517] [drm:check_shared_dpll_state], PCH DPLL B [ 5.234521] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 5.234523] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 5.234524] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 5.234526] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 5.234526] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 5.234528] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 30.844350] [drm:i915_driver_open], [ 30.844369] [drm:intel_crtc_cursor_set], cursor off [ 30.844371] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0) [ 30.844374] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 30.844376] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 30.844378] [drm:intel_crtc_cursor_set], cursor off [ 30.844379] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 30.844380] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 30.844381] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 30.844382] [drm:intel_crtc_cursor_set], cursor off [ 30.844383] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 30.844384] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 30.844385] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 30.853415] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0) [ 30.853417] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 30.853418] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 30.855275] [drm:i915_driver_open], [ 30.855281] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[5] [ 30.856694] [drm:drm_mode_addfb], [FB:28] [ 30.856727] [drm:drm_mode_addfb], [FB:28] [ 30.856889] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[5] [ 30.856892] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[5] [ 30.856914] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 30.856916] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 30.856932] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 30.856934] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 30.856942] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 30.856943] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 30.856951] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 30.856952] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 30.856959] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 30.856961] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 30.875011] [drm:drm_mode_addfb], [FB:28] [ 30.875017] [drm:drm_mode_setcrtc], [CRTC:3] [ 30.875019] [drm:drm_mode_setcrtc], [CONNECTOR:9:VGA-1] [ 30.875020] [drm:intel_crtc_set_config], [CRTC:3] [FB:28] #connectors=1 (x y) (0 0) [ 30.875023] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 [ 30.875024] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 30.877972] [drm:ironlake_update_plane], Writing base 00392000 00000000 0 0 4096 [ 33.038771] [drm:i915_driver_open], [ 33.047251] [drm:i915_gem_context_create_ioctl], HW context 1 created [ 33.052248] ------------[ cut here ]------------ [ 33.052272] kernel BUG at drivers/gpu/drm/i915/intel_ringbuffer.h:268! [ 33.052297] invalid opcode: 0000 [#1] SMP [ 33.052315] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek dcdbas pcspkr serio_raw i2c_i801 snd_hda_intel iTCO_wdt iTCO_vendor_support snd_hda_codec lpc_ich snd_hwdep snd_pcm mfd_core snd_page_alloc snd_timer snd soundcore acpi_cpufreq i915 video button drm_kms_helper drm freq_table [ 33.052441] CPU: 2 PID: 3628 Comm: X Not tainted 3.12.0-rc2_drm-intel-next-queued_13992e_20130925_+ #262 [ 33.052474] Hardware name: Dell Inc. OptiPlex 9010/03JR84, BIOS A01 05/04/2012 [ 33.052501] task: ffff880118ca06f0 ti: ffff88000271a000 task.ti: ffff88000271a000 [ 33.052528] RIP: 0010:[] [] i915_vma_move_to_active+0x5c/0x17e [i915] [ 33.052571] RSP: 0018:ffff88000271bc58 EFLAGS: 00010246 [ 33.052590] RAX: ffff8800daa0c800 RBX: ffff8800dabced80 RCX: ffff8800dabccad8 [ 33.052616] RDX: ffff880002768ad8 RSI: ffff8800dabcc1d8 RDI: ffff8800dabcca80 [ 33.052641] RBP: ffff8800051b15a0 R08: 0000000000000000 R09: 0000000000000003 [ 33.052666] R10: ffff88000271bfd8 R11: ffff880002768780 R12: ffff8800051b0000 [ 33.052692] R13: 0000000000000000 R14: ffff88000271bdf8 R15: 0000000000000000 [ 33.052717] FS: 00007f50626998c0(0000) GS:ffff88011e300000(0000) knlGS:0000000000000000 [ 33.052746] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 33.052767] CR2: 0000000002159ff0 CR3: 0000000002781000 CR4: 00000000001407e0 [ 33.052792] Stack: [ 33.052801] 0000000000000000 ffff8800051b15a0 ffff880002777980 0000000000000001 [ 33.052831] ffffffffa0079657 ffffffffa0078683 0000000000000292 ffffffffa0007a3d [ 33.052861] ffff88000271be28 ffff8800051b0000 ffff880004e99d80 ffffffff81707294 [ 33.052891] Call Trace: [ 33.052907] [] ? gen6_ppgtt_insert_entries+0x114/0x114 [i915] [ 33.052937] [] ? i915_gem_do_execbuffer.isra.16+0xa4e/0xf08 [i915] [ 33.052969] [] ? drm_vblank_get+0x20f/0x220 [drm] [ 33.052994] [] ? mutex_lock_interruptible+0xe/0x3b [ 33.053021] [] ? i915_gem_execbuffer2+0x15e/0x1e4 [i915] [ 33.053049] [] ? drm_ioctl+0x2a5/0x3c4 [drm] [ 33.053073] [] ? sock_aio_read.part.11+0xe6/0xf6 [ 33.053099] [] ? i915_gem_execbuffer+0x37f/0x37f [i915] [ 33.053125] [] ? vfs_ioctl+0x1e/0x31 [ 33.053145] [] ? do_vfs_ioctl+0x3ad/0x3ef [ 33.053166] [] ? SyS_ioctl+0x4e/0x7e [ 33.053186] [] ? system_call_fastpath+0x16/0x1b [ 33.053208] Code: 05 e0 00 00 00 48 89 47 58 48 89 57 60 48 89 0a 48 8b 5f 48 44 8b ad 18 01 00 00 48 8b 43 08 45 85 ed 4c 8b a0 b8 02 00 00 75 02 <0f> 0b 48 85 ed 75 02 0f 0b 48 39 ab 38 01 00 00 74 10 83 bb 44 [ 33.053343] RIP [] i915_vma_move_to_active+0x5c/0x17e [i915] [ 33.053374] RSP [ 33.056879] ---[ end trace 00bc62bccea5219c ]---