[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.0-rc7 (root@tm-stc) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.3, pie-0.5.5) ) #1 SMP Mon Oct 28 10:26:55 CET 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-3.12 root=/dev/sda3 radeon.dpm=0 quiet ro [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd9ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfda0000-0x00000000bfdd0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfdd1000-0x00000000bfdfffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-970A-UD3/GA-970A-UD3, BIOS F7 10/22/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000043f000000 aka 17392M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbfda0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4c60-0x000f4c6f] mapped at [ffff8800000f4c60] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x020e5000, 0x020e5fff] PGTABLE [ 0.000000] BRK [0x020e6000, 0x020e6fff] PGTABLE [ 0.000000] BRK [0x020e7000, 0x020e7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43ee00000-0x43effffff] [ 0.000000] [mem 0x43ee00000-0x43effffff] page 2M [ 0.000000] BRK [0x020e8000, 0x020e8fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43edfffff] [ 0.000000] [mem 0x43c000000-0x43edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff] [ 0.000000] [mem 0x400000000-0x43bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfd9ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbfbfffff] page 2M [ 0.000000] [mem 0xbfc00000-0xbfd9ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] ACPI: RSDP 00000000000f6b80 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000bfdd1000 00050 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000bfdd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000bfdd1100 0792A (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bfda0000 00040 [ 0.000000] ACPI: MSDM 00000000bfdd8b00 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: HPET 00000000bfdd8b80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000bfdd8bc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000bfdd8c40 00860 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: MATS 00000000bfdd94a0 00034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000bfdd9510 00182 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000bfdd8a40 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 00000000bfdd96c0 061FD (v01 MATS RCM 80000001 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bfddf930 01714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: IVRS 00000000bfde10c0 000E0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43effffff] [ 0.000000] NODE_DATA [mem 0x43effa000-0x43effdfff] [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x43effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbfd9ffff] [ 0.000000] node 0: [mem 0x100000000-0x43effffff] [ 0.000000] On node 0 totalpages: 4189502 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12215 pages used for memmap [ 0.000000] DMA32 zone: 781728 pages, LIFO batch:31 [ 0.000000] Normal zone: 53184 pages used for memmap [ 0.000000] Normal zone: 3403776 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfda0000-0xbfdd0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfdd1000-0xbfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xbff00000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88043ec00000 s79936 r8192 d22464 u262144 [ 0.000000] pcpu-alloc: s79936 r8192 d22464 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4124018 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-3.12 root=/dev/sda3 radeon.dpm=0 quiet ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ b4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 16345828K/16758008K available (10216K kernel code, 872K rwdata, 4084K rodata, 1008K init, 1028K bss, 412180K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 4026.896 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 8053.79 BogoMIPS (lpj=4026896) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000023] Security Framework initialized [ 0.000025] SELinux: Initializing. [ 0.000030] SELinux: Starting in permissive mode [ 0.000958] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.004847] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006512] Mount-cache hash table entries: 256 [ 0.006660] Initializing cgroup subsys freezer [ 0.006678] tseg: 00bff00000 [ 0.006679] CPU: Physical Processor ID: 0 [ 0.006680] CPU: Processor Core ID: 0 [ 0.006681] mce: CPU supports 7 MCE banks [ 0.006687] LVT offset 1 assigned for vector 0xf9 [ 0.006692] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512 tlb_flushall_shift: 5 [ 0.006794] Freeing SMP alternatives memory: 40K (ffffffff81fd8000 - ffffffff81fe2000) [ 0.006795] ACPI: Core revision 20130725 [ 0.008510] ACPI: All ACPI Tables successfully acquired [ 0.067900] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.077896] smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (fam: 15, model: 02, stepping: 00) [ 0.179691] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.179696] ... version: 0 [ 0.179697] ... bit width: 48 [ 0.179697] ... generic registers: 6 [ 0.179698] ... value mask: 0000ffffffffffff [ 0.179699] ... max period: 00007fffffffffff [ 0.179700] ... fixed-purpose events: 0 [ 0.179701] ... event mask: 000000000000003f [ 0.179828] MCE: In-kernel MCE decoding enabled. [ 0.179906] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK [ 0.272380] Brought up 8 CPUs [ 0.272383] smpboot: Total of 8 processors activated (64430.33 BogoMIPS) [ 0.281907] devtmpfs: initialized [ 0.282052] PM: Registering ACPI NVS region [mem 0xbfda0000-0xbfdd0fff] (200704 bytes) [ 0.282159] kworker/u16:0 (42) used greatest stack depth: 5688 bytes left [ 0.282304] xor: automatically using best checksumming function: [ 0.291549] avx : 4540.000 MB/sec [ 0.291564] RTC time: 16:41:43, date: 11/01/13 [ 0.291597] NET: Registered protocol family 16 [ 0.291902] cpuidle: using governor ladder [ 0.291903] cpuidle: using governor menu [ 0.291948] ACPI: bus type PCI registered [ 0.291950] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.292020] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.292022] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.301449] PCI: Using configuration type 1 for base access [ 0.301854] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.301856] mtrr: probably your BIOS does not setup all CPUs. [ 0.301857] mtrr: corrected configuration. [ 0.310713] bio: create slab at 0 [ 0.327506] raid6: sse2x1 6722 MB/s [ 0.344487] raid6: sse2x2 10859 MB/s [ 0.361462] raid6: sse2x4 12050 MB/s [ 0.361464] raid6: using algorithm sse2x4 (12050 MB/s) [ 0.361465] raid6: using ssse3x2 recovery algorithm [ 0.361539] ACPI: Added _OSI(Module Device) [ 0.361541] ACPI: Added _OSI(Processor Device) [ 0.361541] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361542] ACPI: Added _OSI(Processor Aggregator Device) [ 0.362034] ACPI: EC: Look up EC in DSDT [ 0.368552] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0xD2, should be 0xD1 (20130725/tbprint-204) [ 0.368652] ACPI: Interpreter enabled [ 0.368656] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.368659] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.368668] ACPI: (supports S0 S3 S4 S5) [ 0.368669] ACPI: Using IOAPIC for interrupt routing [ 0.368731] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.368797] ACPI: No dock devices found. [ 0.413519] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.413524] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.413525] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.413670] ACPI: \_SB_.PCI0.SYSR: can't evaluate _ADR (0x5) [ 0.413770] ACPI: \_SB_.PCI0.FDC0: can't evaluate _ADR (0x5) [ 0.413772] ACPI: \_SB_.PCI0.UAR1: can't evaluate _ADR (0x5) [ 0.413773] ACPI: \_SB_.PCI0.PS2M: can't evaluate _ADR (0x5) [ 0.413775] ACPI: \_SB_.PCI0.PS2K: can't evaluate _ADR (0x5) [ 0.413777] ACPI: \_SB_.PCI0.PSMR: can't evaluate _ADR (0x5) [ 0.413778] ACPI: \_SB_.PCI0.EXPL: can't evaluate _ADR (0x5) [ 0.413779] PCI host bridge to bus 0000:00 [ 0.413781] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.413783] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.413785] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.413786] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.413787] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.413789] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.413790] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] [ 0.413801] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.413811] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.413916] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.414020] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.414049] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.414087] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.414133] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.414162] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.414200] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.414245] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.414274] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.414310] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.414352] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.414381] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.414419] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.414471] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.414485] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.414493] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.414500] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.414507] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.414514] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.414521] pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff] [ 0.414535] pci 0000:00:11.0: set SATA to AHCI mode [ 0.414634] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.414644] pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff] [ 0.414716] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.414765] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.414779] pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff] [ 0.414840] pci 0000:00:12.2: supports D1 D2 [ 0.414841] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.414878] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.414927] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.414937] pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff] [ 0.415008] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.415056] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.415070] pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff] [ 0.415129] pci 0000:00:13.2: supports D1 D2 [ 0.415131] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.415169] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.415220] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.415333] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.415343] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.415350] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.415357] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.415364] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.415371] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 0.415463] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.415479] pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit] [ 0.415527] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.415562] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.415606] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.415722] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.415778] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.415820] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.415830] pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff] [ 0.415903] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.415952] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.416004] pci 0000:00:15.0: supports D1 D2 [ 0.416044] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.416087] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.416097] pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff] [ 0.416168] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.416220] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.416234] pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff] [ 0.416294] pci 0000:00:16.2: supports D1 D2 [ 0.416295] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.416332] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.416378] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.416457] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.416529] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.416607] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.416683] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.416757] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.416894] pci 0000:01:00.0: [1002:665c] type 00 class 0x030000 [ 0.416907] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.416917] pci 0000:01:00.0: reg 0x18: [mem 0xdf800000-0xdfffffff 64bit pref] [ 0.416923] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff] [ 0.416930] pci 0000:01:00.0: reg 0x24: [mem 0xfd580000-0xfd5bffff] [ 0.416937] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.416974] pci 0000:01:00.0: supports D1 D2 [ 0.416976] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.417045] pci 0000:01:00.1: [1002:aac0] type 00 class 0x040300 [ 0.417057] pci 0000:01:00.1: reg 0x10: [mem 0xfd5fc000-0xfd5fffff 64bit] [ 0.417121] pci 0000:01:00.1: supports D1 D2 [ 0.418420] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.418424] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.418426] pci 0000:00:02.0: bridge window [mem 0xfd500000-0xfd5fffff] [ 0.418429] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.418496] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.418511] pci 0000:02:00.0: reg 0x10: [mem 0xfd4f8000-0xfd4fffff 64bit] [ 0.418577] pci 0000:02:00.0: supports D1 D2 [ 0.418578] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.420417] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.420421] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] [ 0.420423] pci 0000:00:04.0: bridge window [mem 0xfd400000-0xfd4fffff] [ 0.420426] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.420495] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.420507] pci 0000:03:00.0: reg 0x10: [io 0xee00-0xeeff] [ 0.420525] pci 0000:03:00.0: reg 0x18: [mem 0xfdcff000-0xfdcfffff 64bit pref] [ 0.420537] pci 0000:03:00.0: reg 0x20: [mem 0xfdcf8000-0xfdcfbfff 64bit pref] [ 0.420589] pci 0000:03:00.0: supports D1 D2 [ 0.420591] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.422415] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.422418] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.422421] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.422424] pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.422490] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.422505] pci 0000:04:00.0: reg 0x10: [mem 0xfdbf8000-0xfdbfffff 64bit] [ 0.422570] pci 0000:04:00.0: supports D1 D2 [ 0.422572] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.424412] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.424415] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.424418] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.424421] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.424494] pci 0000:05:0e.0: [1106:3044] type 00 class 0x0c0010 [ 0.424513] pci 0000:05:0e.0: reg 0x10: [mem 0xfdaff000-0xfdaff7ff] [ 0.424523] pci 0000:05:0e.0: reg 0x14: [io 0xaf00-0xaf7f] [ 0.424598] pci 0000:05:0e.0: supports D2 [ 0.424600] pci 0000:05:0e.0: PME# supported from D2 D3hot D3cold [ 0.424667] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 0.424671] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.424674] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff] [ 0.424677] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref] [ 0.424679] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.424680] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.424681] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.424683] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.424684] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.424686] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.424751] pci 0000:00:15.0: PCI bridge to [bus 06] [ 0.424755] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff] [ 0.424758] pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.424762] pci 0000:00:15.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.439451] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 0.439488] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 0.439522] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 0.439557] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 0.439591] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 0.439624] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 0.439657] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 0.439690] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 0.440018] ACPI: \_SB_.PCI0: notify handler is installed [ 0.440040] Found 1 acpi root devices [ 0.440185] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.440186] vgaarb: loaded [ 0.440187] vgaarb: bridge control possible 0000:01:00.0 [ 0.440301] SCSI subsystem initialized [ 0.440409] libata version 3.00 loaded. [ 0.440505] ACPI: bus type USB registered [ 0.440562] usbcore: registered new interface driver usbfs [ 0.440589] usbcore: registered new interface driver hub [ 0.440630] usbcore: registered new device driver usb [ 0.440729] pps_core: LinuxPPS API ver. 1 registered [ 0.440730] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.440754] PTP clock support registered [ 0.440962] Advanced Linux Sound Architecture Driver Initialized. [ 0.440963] PCI: Using ACPI for IRQ routing [ 0.447118] PCI: pci_cache_line_size set to 64 bytes [ 0.447125] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.447172] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.447173] e820: reserve RAM buffer [mem 0xbfda0000-0xbfffffff] [ 0.447174] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] [ 0.447335] NetLabel: Initializing [ 0.447336] NetLabel: domain hash size = 128 [ 0.447337] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.447345] NetLabel: unlabeled traffic allowed by default [ 0.447373] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.447375] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.449414] Switched to clocksource hpet [ 0.452590] FS-Cache: Loaded [ 0.452633] pnp: PnP ACPI init [ 0.452640] ACPI: bus type PNP registered [ 0.452720] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.452722] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.452724] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.452726] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.478475] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.478494] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.478561] system 00:01: [io 0x0900-0x091f] has been reserved [ 0.478563] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.478564] system 00:01: [io 0x040b] has been reserved [ 0.478566] system 00:01: [io 0x04d6] has been reserved [ 0.478567] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.478569] system 00:01: [io 0x0c14] has been reserved [ 0.478571] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.478572] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.478573] system 00:01: [io 0x0c6f] has been reserved [ 0.478575] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.478577] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.478578] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.478580] system 00:01: [io 0x0800-0x08fe] could not be reserved [ 0.478581] system 00:01: [io 0x0a10-0x0a17] has been reserved [ 0.478583] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.478584] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.478586] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.478588] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.478590] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.478660] pnp 00:02: [dma 4] [ 0.478702] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.478785] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.478845] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.478892] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.478938] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.479212] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.479283] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.479352] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.479354] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.479449] pnp 00:0a: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.479451] pnp 00:0a: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.479453] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.479455] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.479457] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.479458] pnp 00:0a: disabling [mem 0x00100000-0xbfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.479520] system 00:0a: [mem 0xbfda0000-0xbfdfffff] could not be reserved [ 0.479522] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved [ 0.479524] system 00:0a: [mem 0xbfe00000-0xbfefffff] has been reserved [ 0.479525] system 00:0a: [mem 0xbff00000-0xbfffffff] could not be reserved [ 0.479527] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.479528] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.479530] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.479532] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.479546] pnp: PnP ACPI: found 11 devices [ 0.479547] ACPI: bus type PNP unregistered [ 0.488034] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref] [ 0.488036] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.488038] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.488041] pci 0000:00:02.0: bridge window [mem 0xfd500000-0xfd5fffff] [ 0.488043] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.488046] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.488048] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] [ 0.488050] pci 0000:00:04.0: bridge window [mem 0xfd400000-0xfd4fffff] [ 0.488052] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.488055] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.488057] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.488059] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.488061] pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.488064] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.488065] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.488067] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.488069] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.488072] pci 0000:00:14.4: PCI bridge to [bus 05] [ 0.488074] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 0.488078] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff] [ 0.488081] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref] [ 0.488085] pci 0000:00:15.0: PCI bridge to [bus 06] [ 0.488087] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff] [ 0.488090] pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.488093] pci 0000:00:15.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.488097] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.488098] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.488100] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.488101] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.488103] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.488104] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff] [ 0.488105] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.488107] pci_bus 0000:01: resource 1 [mem 0xfd500000-0xfd5fffff] [ 0.488108] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.488110] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.488111] pci_bus 0000:02: resource 1 [mem 0xfd400000-0xfd4fffff] [ 0.488112] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.488114] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.488115] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.488117] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.488118] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.488119] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.488121] pci_bus 0000:04: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.488122] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 0.488123] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.488125] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff pref] [ 0.488126] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.488127] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.488129] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.488130] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.488131] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.488133] pci_bus 0000:05: resource 9 [mem 0xc0000000-0xfebfffff] [ 0.488134] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff] [ 0.488135] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.488137] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.488156] NET: Registered protocol family 2 [ 0.488395] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.488788] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.488978] TCP: Hash tables configured (established 131072 bind 65536) [ 0.489008] TCP: reno registered [ 0.489025] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.489093] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.489191] NET: Registered protocol family 1 [ 0.489273] RPC: Registered named UNIX socket transport module. [ 0.489274] RPC: Registered udp transport module. [ 0.489275] RPC: Registered tcp transport module. [ 0.489275] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.747417] pci 0000:01:00.0: Boot video device [ 0.747690] PCI: CLS 64 bytes, default 64 [ 0.826707] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.826709] pci 0000:00:00.2: PCI INT A: no GSI [ 0.826852] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.826862] pci 0000:00:00.2: irq 40 for MSI/MSI-X [ 0.833257] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.911768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.911770] software IO TLB [mem 0xbbda0000-0xbfda0000] (64MB) mapped at [ffff8800bbda0000-ffff8800bfd9ffff] [ 0.911890] kvm: Nested Virtualization enabled [ 0.911893] kvm: Nested Paging enabled [ 0.912220] perf: AMD NB counters detected [ 0.912247] LVT offset 0 assigned for vector 0x400 [ 0.912269] perf: AMD IBS detected (0x000000ff) [ 0.913178] microcode: CPU0: patch_level=0x0600081c [ 0.913184] microcode: CPU1: patch_level=0x0600081c [ 0.913191] microcode: CPU2: patch_level=0x0600081c [ 0.913198] microcode: CPU3: patch_level=0x0600081c [ 0.913203] microcode: CPU4: patch_level=0x0600081c [ 0.913209] microcode: CPU5: patch_level=0x0600081c [ 0.913215] microcode: CPU6: patch_level=0x0600081c [ 0.913220] microcode: CPU7: patch_level=0x0600081c [ 0.913270] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.913272] Scanning for low memory corruption every 60 seconds [ 0.913903] audit: initializing netlink socket (disabled) [ 0.913911] type=2000 audit(1383324103.736:1): initialized [ 0.933916] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.936769] VFS: Disk quotas dquot_6.5.2 [ 0.936827] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.937442] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.938047] NFS: Registering the id_resolver key type [ 0.938055] Key type id_resolver registered [ 0.938056] Key type id_legacy registered [ 0.938058] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.938275] FS-Cache: Netfs 'cifs' registered for caching [ 0.938369] Key type cifs.spnego registered [ 0.938373] Key type cifs.idmap registered [ 0.938375] NTFS driver 2.1.30 [Flags: R/W]. [ 0.938554] fuse init (API version 7.22) [ 0.939071] bio: create slab at 1 [ 0.939293] Btrfs loaded [ 0.939297] msgmni has been set to 31925 [ 0.939373] SELinux: Registering netfilter hooks [ 0.939868] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.939870] io scheduler noop registered [ 0.939871] io scheduler deadline registered [ 0.939917] io scheduler cfq registered (default) [ 0.940446] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.940541] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.940738] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.940741] ACPI: Power Button [PWRB] [ 0.940795] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.940797] ACPI: Power Button [PWRF] [ 0.940954] ACPI: acpi_idle registered with cpuidle [ 0.941620] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.962133] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.962868] Non-volatile memory driver v1.3 [ 0.962876] Linux agpgart interface v0.103 [ 0.962929] [drm] Initialized drm 1.1.0 20060810 [ 0.962974] [drm] radeon kernel modesetting enabled. [ 0.963033] pcieport 0000:00:02.0: driver skip pci_set_master, fix it! [ 0.963220] [drm] initializing kernel modesetting (BONAIRE 0x1002:0x665C 0x1043:0x045A). [ 0.963234] [drm] register mmio base: 0xFD580000 [ 0.963235] [drm] register mmio size: 262144 [ 0.963392] [drm] doorbell mmio base: 0xDF800000 [ 0.963393] [drm] doorbell mmio size: 4194304 [ 0.963762] ATOM BIOS: 665C.15.32.0.1.AS06 [ 0.963824] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 0.963842] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 0.963844] [drm] Detected VRAM RAM=1024M, BAR=256M [ 0.963845] [drm] RAM width 128bits DDR [ 0.963887] [TTM] Zone kernel: Available graphics memory: 8172934 kiB [ 0.963888] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 0.963889] [TTM] Initializing pool allocator [ 0.963891] [TTM] Initializing DMA pool allocator [ 0.963909] [drm] radeon: 1024M of VRAM memory ready [ 0.963910] [drm] radeon: 1024M of GTT memory ready. [ 0.964014] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 0.965098] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0 [ 0.965101] [drm] PCIE gen 2 link speeds already enabled [ 0.970957] [drm] Loading BONAIRE Microcode [ 0.972283] [drm] PCIE GART of 1024M enabled (table at 0x0000000000277000). [ 0.972380] radeon 0000:01:00.0: WB enabled [ 0.972390] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88042b58ec00 [ 0.972392] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88042b58ec04 [ 0.972394] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88042b58ec08 [ 0.972395] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88042b58ec0c [ 0.972396] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88042b58ec10 [ 0.972781] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90012236c98 [ 0.972784] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.972784] [drm] Driver supports precise vblank timestamp query. [ 0.972801] radeon 0000:01:00.0: irq 41 for MSI/MSI-X [ 0.972809] radeon 0000:01:00.0: radeon: using MSI. [ 0.972845] [drm] radeon: irq initialized. [ 0.975641] [drm] ring test on 0 succeeded in 3 usecs [ 0.975714] [drm] ring test on 1 succeeded in 3 usecs [ 0.975729] [drm] ring test on 2 succeeded in 3 usecs [ 0.975875] [drm] ring test on 3 succeeded in 2 usecs [ 0.975885] [drm] ring test on 4 succeeded in 2 usecs [ 1.031864] [drm] ring test on 5 succeeded in 2 usecs [ 1.051856] [drm] UVD initialized successfully. [ 1.052791] [drm] Enabling audio 0 support [ 1.052792] [drm] Enabling audio 1 support [ 1.052793] [drm] Enabling audio 2 support [ 1.052793] [drm] Enabling audio 3 support [ 1.052794] [drm] Enabling audio 4 support [ 1.052795] [drm] Enabling audio 5 support [ 1.052796] [drm] Enabling audio 6 support [ 1.052938] [drm] ib test on ring 0 succeeded in 0 usecs [ 1.053078] [drm] ib test on ring 1 succeeded in 0 usecs [ 1.053218] [drm] ib test on ring 2 succeeded in 0 usecs [ 1.053359] [drm] ib test on ring 3 succeeded in 0 usecs [ 1.053500] [drm] ib test on ring 4 succeeded in 0 usecs [ 1.074282] [drm] ib test on ring 5 succeeded [ 1.095427] [drm] Radeon Display Connectors [ 1.095428] [drm] Connector 0: [ 1.095429] [drm] DP-1 [ 1.095430] [drm] HPD2 [ 1.095431] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 1.095432] [drm] Encoders: [ 1.095433] [drm] DFP1: INTERNAL_UNIPHY2 [ 1.095434] [drm] Connector 1: [ 1.095434] [drm] HDMI-A-1 [ 1.095435] [drm] HPD3 [ 1.095436] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 1.095437] [drm] Encoders: [ 1.095437] [drm] DFP2: INTERNAL_UNIPHY2 [ 1.095438] [drm] Connector 2: [ 1.095439] [drm] DVI-D-1 [ 1.095440] [drm] HPD1 [ 1.095441] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 1.095441] [drm] Encoders: [ 1.095442] [drm] DFP3: INTERNAL_UNIPHY1 [ 1.095443] [drm] Connector 3: [ 1.095443] [drm] DVI-I-1 [ 1.095444] [drm] HPD6 [ 1.095445] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 1.095446] [drm] Encoders: [ 1.095446] [drm] DFP4: INTERNAL_UNIPHY [ 1.095447] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 1.095546] [drm] Internal thermal controller with fan control [ 1.095600] [drm] radeon: power management initialized [ 1.134872] [drm] fb mappable at 0xC1488000 [ 1.134873] [drm] vram apper at 0xC0000000 [ 1.134874] [drm] size 5324800 [ 1.134875] [drm] fb depth is 24 [ 1.134876] [drm] pitch is 5888 [ 1.134970] fbcon: radeondrmfb (fb0) is primary device [ 1.143763] Console: switching to colour frame buffer device 180x56 [ 1.145987] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 1.145988] radeon 0000:01:00.0: registered panic notifier [ 1.145991] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0 [ 1.147237] loop: module loaded [ 1.147487] ahci 0000:00:11.0: version 3.0 [ 1.147670] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.147673] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.148428] scsi0 : ahci [ 1.148552] scsi1 : ahci [ 1.148679] scsi2 : ahci [ 1.148798] scsi3 : ahci [ 1.148888] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19 [ 1.148890] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19 [ 1.148892] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19 [ 1.148894] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19 [ 1.150052] scsi4 : pata_atiixp [ 1.150173] scsi5 : pata_atiixp [ 1.150262] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.150263] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.150374] tun: Universal TUN/TAP device driver, 1.6 [ 1.150375] tun: (C) 1999-2004 Max Krasnyansky [ 1.150497] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.150498] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.150548] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.150549] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.150595] sky2: driver version 1.30 [ 1.150802] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.150809] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.150812] pcieport 0000:00:09.0: driver skip pci_set_master, fix it! [ 1.150982] r8169 0000:03:00.0: irq 42 for MSI/MSI-X [ 1.151195] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011c7a000, 90:2b:34:a8:3f:a3, XID 0c900800 IRQ 42 [ 1.151197] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.151430] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.151432] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 1.151434] ehci-pci: EHCI PCI platform driver [ 1.151542] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.151608] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.151625] QUIRK: Enable AMD PLL fix [ 1.151626] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.151636] ehci-pci 0000:00:12.2: debug port 1 [ 1.151640] ehci-pci 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 [ 1.151643] ehci-pci 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.151657] ehci-pci 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.151663] ehci-pci 0000:00:12.2: MWI active [ 1.151664] ehci-pci 0000:00:12.2: supports USB remote wakeup [ 1.151673] ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000 [ 1.151677] ehci-pci 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.157693] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.157726] usb usb1: default language 0x0409 [ 1.157735] usb usb1: udev 1, busnum 1, minor = 0 [ 1.157736] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.157738] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.157739] usb usb1: Product: EHCI Host Controller [ 1.157741] usb usb1: Manufacturer: Linux 3.12.0-rc7 ehci_hcd [ 1.157742] usb usb1: SerialNumber: 0000:00:12.2 [ 1.157850] usb usb1: usb_probe_device [ 1.157852] usb usb1: configuration #1 chosen from 1 choice [ 1.157859] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.157910] hub 1-0:1.0: usb_probe_interface [ 1.157912] hub 1-0:1.0: usb_probe_interface - got id [ 1.157913] hub 1-0:1.0: USB hub found [ 1.157918] hub 1-0:1.0: 5 ports detected [ 1.157919] hub 1-0:1.0: standalone hub [ 1.157920] hub 1-0:1.0: no power switching (usb 1.0) [ 1.157921] hub 1-0:1.0: individual port over-current protection [ 1.157923] hub 1-0:1.0: power on to power good time: 20ms [ 1.157928] hub 1-0:1.0: local power source is good [ 1.157957] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.158109] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.158184] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.158187] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.158196] ehci-pci 0000:00:13.2: debug port 1 [ 1.158200] ehci-pci 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 [ 1.158202] ehci-pci 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.158215] ehci-pci 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.158221] ehci-pci 0000:00:13.2: MWI active [ 1.158222] ehci-pci 0000:00:13.2: supports USB remote wakeup [ 1.158226] ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000 [ 1.158229] ehci-pci 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.163639] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.163657] usb usb2: default language 0x0409 [ 1.163667] usb usb2: udev 1, busnum 2, minor = 128 [ 1.163668] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.163670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.163672] usb usb2: Product: EHCI Host Controller [ 1.163673] usb usb2: Manufacturer: Linux 3.12.0-rc7 ehci_hcd [ 1.163676] usb usb2: SerialNumber: 0000:00:13.2 [ 1.163782] usb usb2: usb_probe_device [ 1.163784] usb usb2: configuration #1 chosen from 1 choice [ 1.163789] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.163837] hub 2-0:1.0: usb_probe_interface [ 1.163838] hub 2-0:1.0: usb_probe_interface - got id [ 1.163840] hub 2-0:1.0: USB hub found [ 1.163845] hub 2-0:1.0: 5 ports detected [ 1.163846] hub 2-0:1.0: standalone hub [ 1.163847] hub 2-0:1.0: no power switching (usb 1.0) [ 1.163848] hub 2-0:1.0: individual port over-current protection [ 1.163849] hub 2-0:1.0: power on to power good time: 20ms [ 1.163854] hub 2-0:1.0: local power source is good [ 1.163881] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.164028] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.164099] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.164102] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.164111] ehci-pci 0000:00:16.2: debug port 1 [ 1.164114] ehci-pci 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4 [ 1.164117] ehci-pci 0000:00:16.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.164129] ehci-pci 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.164135] ehci-pci 0000:00:16.2: MWI active [ 1.164136] ehci-pci 0000:00:16.2: supports USB remote wakeup [ 1.164140] ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000 [ 1.164143] ehci-pci 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.169694] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.169742] usb usb3: default language 0x0409 [ 1.169750] usb usb3: udev 1, busnum 3, minor = 256 [ 1.169752] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.169754] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.169755] usb usb3: Product: EHCI Host Controller [ 1.169756] usb usb3: Manufacturer: Linux 3.12.0-rc7 ehci_hcd [ 1.169757] usb usb3: SerialNumber: 0000:00:16.2 [ 1.169859] usb usb3: usb_probe_device [ 1.169861] usb usb3: configuration #1 chosen from 1 choice [ 1.169867] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.169917] hub 3-0:1.0: usb_probe_interface [ 1.169918] hub 3-0:1.0: usb_probe_interface - got id [ 1.169920] hub 3-0:1.0: USB hub found [ 1.169924] hub 3-0:1.0: 4 ports detected [ 1.169925] hub 3-0:1.0: standalone hub [ 1.169926] hub 3-0:1.0: no power switching (usb 1.0) [ 1.169927] hub 3-0:1.0: individual port over-current protection [ 1.169928] hub 3-0:1.0: power on to power good time: 20ms [ 1.169933] hub 3-0:1.0: local power source is good [ 1.169957] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.170033] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.170034] ohci_hcd: block sizes: ed 80 td 96 [ 1.170037] ohci-pci: OHCI PCI platform driver [ 1.170148] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.170215] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.170219] ohci-pci 0000:00:12.0: enabled AMD prefetch quirk [ 1.170229] ohci-pci 0000:00:12.0: created debug files [ 1.170230] ohci-pci 0000:00:12.0: supports USB remote wakeup [ 1.170240] ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000 [ 1.224625] ohci-pci 0000:00:12.0: OHCI controller state [ 1.224629] ohci-pci 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.224632] ohci-pci 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.224634] ohci-pci 0000:00:12.0: cmdstatus 0x00000 SOC=0 [ 1.224637] ohci-pci 0000:00:12.0: intrstatus 0x00000004 SF [ 1.224639] ohci-pci 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.224646] ohci-pci 0000:00:12.0: hcca frame #0005 [ 1.224649] ohci-pci 0000:00:12.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5) [ 1.224651] ohci-pci 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.224653] ohci-pci 0000:00:12.0: roothub.status 00008000 DRWE [ 1.224655] ohci-pci 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS [ 1.224658] ohci-pci 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS [ 1.224660] ohci-pci 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS [ 1.224662] ohci-pci 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS [ 1.224664] ohci-pci 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS [ 1.224676] usb usb4: default language 0x0409 [ 1.224683] usb usb4: udev 1, busnum 4, minor = 384 [ 1.224685] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.224686] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.224687] usb usb4: Product: OHCI PCI host controller [ 1.224688] usb usb4: Manufacturer: Linux 3.12.0-rc7 ohci_hcd [ 1.224689] usb usb4: SerialNumber: 0000:00:12.0 [ 1.224872] usb usb4: usb_probe_device [ 1.224874] usb usb4: configuration #1 chosen from 1 choice [ 1.224883] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.224933] hub 4-0:1.0: usb_probe_interface [ 1.224934] hub 4-0:1.0: usb_probe_interface - got id [ 1.224936] hub 4-0:1.0: USB hub found [ 1.224943] hub 4-0:1.0: 5 ports detected [ 1.224944] hub 4-0:1.0: standalone hub [ 1.224945] hub 4-0:1.0: no power switching (usb 1.0) [ 1.224946] hub 4-0:1.0: global over-current protection [ 1.224948] hub 4-0:1.0: power on to power good time: 4ms [ 1.224953] hub 4-0:1.0: local power source is good [ 1.224955] hub 4-0:1.0: no over-current condition exists [ 1.224981] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.225016] ohci-pci 0000:00:12.0: FS/LS companion for 0000:00:12.2 [ 1.225128] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.225201] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.225204] ohci-pci 0000:00:13.0: enabled AMD prefetch quirk [ 1.225218] ohci-pci 0000:00:13.0: created debug files [ 1.225219] ohci-pci 0000:00:13.0: supports USB remote wakeup [ 1.225223] ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000 [ 1.257603] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.257714] hub 1-0:1.0: hub_suspend [ 1.257721] usb usb1: bus auto-suspend, wakeup 1 [ 1.257723] ehci-pci 0000:00:12.2: suspend root hub [ 1.263579] ehci-pci 0000:00:13.2: GetStatus port:3 status 001c03 0 ACK POWER sig=? CSC CONNECT [ 1.263583] hub 2-0:1.0: port 3: status 0501 change 0001 [ 1.263593] ehci-pci 0000:00:13.2: GetStatus port:5 status 001403 0 ACK POWER sig=k CSC CONNECT [ 1.263595] hub 2-0:1.0: port 5: status 0501 change 0001 [ 1.269587] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 1.269592] hub 3-0:1.0: hub_suspend [ 1.269596] usb usb3: bus auto-suspend, wakeup 1 [ 1.269597] ehci-pci 0000:00:16.2: suspend root hub [ 1.279563] ohci-pci 0000:00:13.0: OHCI controller state [ 1.279567] ohci-pci 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.279570] ohci-pci 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.279572] ohci-pci 0000:00:13.0: cmdstatus 0x00000 SOC=0 [ 1.279575] ohci-pci 0000:00:13.0: intrstatus 0x00000004 SF [ 1.279577] ohci-pci 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.279584] ohci-pci 0000:00:13.0: hcca frame #0005 [ 1.279587] ohci-pci 0000:00:13.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5) [ 1.279589] ohci-pci 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.279591] ohci-pci 0000:00:13.0: roothub.status 00008000 DRWE [ 1.279593] ohci-pci 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS [ 1.279596] ohci-pci 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS [ 1.279598] ohci-pci 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS [ 1.279600] ohci-pci 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS [ 1.279602] ohci-pci 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS [ 1.279614] usb usb5: default language 0x0409 [ 1.279621] usb usb5: udev 1, busnum 5, minor = 512 [ 1.279623] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.279624] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.279625] usb usb5: Product: OHCI PCI host controller [ 1.279626] usb usb5: Manufacturer: Linux 3.12.0-rc7 ohci_hcd [ 1.279627] usb usb5: SerialNumber: 0000:00:13.0 [ 1.279812] usb usb5: usb_probe_device [ 1.279814] usb usb5: configuration #1 chosen from 1 choice [ 1.279820] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.279871] hub 5-0:1.0: usb_probe_interface [ 1.279872] hub 5-0:1.0: usb_probe_interface - got id [ 1.279874] hub 5-0:1.0: USB hub found [ 1.279881] hub 5-0:1.0: 5 ports detected [ 1.279882] hub 5-0:1.0: standalone hub [ 1.279883] hub 5-0:1.0: no power switching (usb 1.0) [ 1.279884] hub 5-0:1.0: global over-current protection [ 1.279885] hub 5-0:1.0: power on to power good time: 4ms [ 1.279891] hub 5-0:1.0: local power source is good [ 1.279892] hub 5-0:1.0: no over-current condition exists [ 1.279919] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.279955] ohci-pci 0000:00:13.0: FS/LS companion for 0000:00:13.2 [ 1.280067] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.280140] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.280144] ohci-pci 0000:00:14.5: enabled AMD prefetch quirk [ 1.280154] ohci-pci 0000:00:14.5: created debug files [ 1.280155] ohci-pci 0000:00:14.5: supports USB remote wakeup [ 1.280160] ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000 [ 1.324614] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.324633] hub 4-0:1.0: hub_suspend [ 1.324649] usb usb4: bus auto-suspend, wakeup 1 [ 1.324655] ohci-pci 0000:00:12.0: suspend root hub [ 1.334507] ohci-pci 0000:00:14.5: OHCI controller state [ 1.334511] ohci-pci 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running [ 1.334514] ohci-pci 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3 [ 1.334517] ohci-pci 0000:00:14.5: cmdstatus 0x00000 SOC=0 [ 1.334519] ohci-pci 0000:00:14.5: intrstatus 0x00000004 SF [ 1.334521] ohci-pci 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.334528] ohci-pci 0000:00:14.5: hcca frame #0005 [ 1.334531] ohci-pci 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2) [ 1.334533] ohci-pci 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.334535] ohci-pci 0000:00:14.5: roothub.status 00008000 DRWE [ 1.334537] ohci-pci 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS [ 1.334540] ohci-pci 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS [ 1.334554] usb usb6: default language 0x0409 [ 1.334561] usb usb6: udev 1, busnum 6, minor = 640 [ 1.334563] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.334564] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.334565] usb usb6: Product: OHCI PCI host controller [ 1.334566] usb usb6: Manufacturer: Linux 3.12.0-rc7 ohci_hcd [ 1.334567] usb usb6: SerialNumber: 0000:00:14.5 [ 1.334801] usb usb6: usb_probe_device [ 1.334803] usb usb6: configuration #1 chosen from 1 choice [ 1.334809] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.334859] hub 6-0:1.0: usb_probe_interface [ 1.334861] hub 6-0:1.0: usb_probe_interface - got id [ 1.334862] hub 6-0:1.0: USB hub found [ 1.334868] hub 6-0:1.0: 2 ports detected [ 1.334869] hub 6-0:1.0: standalone hub [ 1.334870] hub 6-0:1.0: no power switching (usb 1.0) [ 1.334871] hub 6-0:1.0: global over-current protection [ 1.334872] hub 6-0:1.0: power on to power good time: 4ms [ 1.334878] hub 6-0:1.0: local power source is good [ 1.334879] hub 6-0:1.0: no over-current condition exists [ 1.334892] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.335031] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.335102] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.335106] ohci-pci 0000:00:16.0: enabled AMD prefetch quirk [ 1.335116] ohci-pci 0000:00:16.0: created debug files [ 1.335117] ohci-pci 0000:00:16.0: supports USB remote wakeup [ 1.335121] ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000 [ 1.363539] hub 2-0:1.0: state 7 ports 5 chg 0028 evt 0000 [ 1.363580] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 1.389446] ohci-pci 0000:00:16.0: OHCI controller state [ 1.389449] ohci-pci 0000:00:16.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.389452] ohci-pci 0000:00:16.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.389455] ohci-pci 0000:00:16.0: cmdstatus 0x00000 SOC=0 [ 1.389457] ohci-pci 0000:00:16.0: intrstatus 0x00000004 SF [ 1.389460] ohci-pci 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.389467] ohci-pci 0000:00:16.0: hcca frame #0005 [ 1.389469] ohci-pci 0000:00:16.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) [ 1.389471] ohci-pci 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.389473] ohci-pci 0000:00:16.0: roothub.status 00008000 DRWE [ 1.389476] ohci-pci 0000:00:16.0: roothub.portstatus [0] 0x00000100 PPS [ 1.389478] ohci-pci 0000:00:16.0: roothub.portstatus [1] 0x00000100 PPS [ 1.389480] ohci-pci 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS [ 1.389483] ohci-pci 0000:00:16.0: roothub.portstatus [3] 0x00000100 PPS [ 1.389494] usb usb7: default language 0x0409 [ 1.389501] usb usb7: udev 1, busnum 7, minor = 768 [ 1.389502] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.389504] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.389505] usb usb7: Product: OHCI PCI host controller [ 1.389506] usb usb7: Manufacturer: Linux 3.12.0-rc7 ohci_hcd [ 1.389507] usb usb7: SerialNumber: 0000:00:16.0 [ 1.389738] usb usb7: usb_probe_device [ 1.389740] usb usb7: configuration #1 chosen from 1 choice [ 1.389746] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.389798] hub 7-0:1.0: usb_probe_interface [ 1.389800] hub 7-0:1.0: usb_probe_interface - got id [ 1.389801] hub 7-0:1.0: USB hub found [ 1.389807] hub 7-0:1.0: 4 ports detected [ 1.389809] hub 7-0:1.0: standalone hub [ 1.389810] hub 7-0:1.0: no power switching (usb 1.0) [ 1.389811] hub 7-0:1.0: global over-current protection [ 1.389812] hub 7-0:1.0: power on to power good time: 4ms [ 1.389817] hub 7-0:1.0: local power source is good [ 1.389819] hub 7-0:1.0: no over-current condition exists [ 1.389844] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.389877] ohci-pci 0000:00:16.0: FS/LS companion for 0000:00:16.2 [ 1.389926] uhci_hcd: USB Universal Host Controller Interface driver [ 1.390026] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.390098] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 1.390107] xhci_hcd 0000:02:00.0: xHCI capability registers at ffffc90011cd0000: [ 1.390109] xhci_hcd 0000:02:00.0: CAPLENGTH AND HCIVERSION 0x1000020: [ 1.390111] xhci_hcd 0000:02:00.0: CAPLENGTH: 0x20 [ 1.390112] xhci_hcd 0000:02:00.0: HCIVERSION: 0x100 [ 1.390114] xhci_hcd 0000:02:00.0: HCSPARAMS 1: 0x4000440 [ 1.390115] xhci_hcd 0000:02:00.0: Max device slots: 64 [ 1.390116] xhci_hcd 0000:02:00.0: Max interrupters: 4 [ 1.390117] xhci_hcd 0000:02:00.0: Max ports: 4 [ 1.390119] xhci_hcd 0000:02:00.0: HCSPARAMS 2: 0x240000f9 [ 1.390120] xhci_hcd 0000:02:00.0: Isoc scheduling threshold: 9 [ 1.390121] xhci_hcd 0000:02:00.0: Maximum allowed segments in event ring: 15 [ 1.390123] xhci_hcd 0000:02:00.0: HCSPARAMS 3 0x7ff0003: [ 1.390124] xhci_hcd 0000:02:00.0: Worst case U1 device exit latency: 3 [ 1.390126] xhci_hcd 0000:02:00.0: Worst case U2 device exit latency: 2047 [ 1.390127] xhci_hcd 0000:02:00.0: HCC PARAMS 0x40040a5: [ 1.390129] xhci_hcd 0000:02:00.0: HC generates 64 bit addresses [ 1.390130] xhci_hcd 0000:02:00.0: FIXME: more HCCPARAMS debugging [ 1.390132] xhci_hcd 0000:02:00.0: RTSOFF 0x2000: [ 1.390133] xhci_hcd 0000:02:00.0: xHCI operational registers at ffffc90011cd0020: [ 1.390135] xhci_hcd 0000:02:00.0: USBCMD 0x0: [ 1.390136] xhci_hcd 0000:02:00.0: HC is being stopped [ 1.390137] xhci_hcd 0000:02:00.0: HC has finished hard reset [ 1.390138] xhci_hcd 0000:02:00.0: Event Interrupts disabled [ 1.390139] xhci_hcd 0000:02:00.0: Host System Error Interrupts disabled [ 1.390140] xhci_hcd 0000:02:00.0: HC has finished light reset [ 1.390142] xhci_hcd 0000:02:00.0: USBSTS 0x1: [ 1.390143] xhci_hcd 0000:02:00.0: Event ring is empty [ 1.390144] xhci_hcd 0000:02:00.0: No Host System Error [ 1.390145] xhci_hcd 0000:02:00.0: HC is halted [ 1.390148] xhci_hcd 0000:02:00.0: ffffc90011cd0420 port status reg = 0x2a0 [ 1.390150] xhci_hcd 0000:02:00.0: ffffc90011cd0424 port power reg = 0x0 [ 1.390152] xhci_hcd 0000:02:00.0: ffffc90011cd0428 port link reg = 0x0 [ 1.390154] xhci_hcd 0000:02:00.0: ffffc90011cd042c port reserved reg = 0x0 [ 1.390157] xhci_hcd 0000:02:00.0: ffffc90011cd0430 port status reg = 0x2a0 [ 1.390159] xhci_hcd 0000:02:00.0: ffffc90011cd0434 port power reg = 0x0 [ 1.390161] xhci_hcd 0000:02:00.0: ffffc90011cd0438 port link reg = 0x0 [ 1.390163] xhci_hcd 0000:02:00.0: ffffc90011cd043c port reserved reg = 0x0 [ 1.390165] xhci_hcd 0000:02:00.0: ffffc90011cd0440 port status reg = 0x2a0 [ 1.390167] xhci_hcd 0000:02:00.0: ffffc90011cd0444 port power reg = 0x0 [ 1.390170] xhci_hcd 0000:02:00.0: ffffc90011cd0448 port link reg = 0x0 [ 1.390172] xhci_hcd 0000:02:00.0: ffffc90011cd044c port reserved reg = 0x0 [ 1.390174] xhci_hcd 0000:02:00.0: ffffc90011cd0450 port status reg = 0x2a0 [ 1.390176] xhci_hcd 0000:02:00.0: ffffc90011cd0454 port power reg = 0x0 [ 1.390178] xhci_hcd 0000:02:00.0: ffffc90011cd0458 port link reg = 0x0 [ 1.390180] xhci_hcd 0000:02:00.0: ffffc90011cd045c port reserved reg = 0x0 [ 1.390182] xhci_hcd 0000:02:00.0: QUIRK: Resetting on resume [ 1.390183] xhci_hcd 0000:02:00.0: // Halt the HC [ 1.390187] xhci_hcd 0000:02:00.0: Resetting HCD [ 1.390189] xhci_hcd 0000:02:00.0: // Reset the HC [ 1.390194] xhci_hcd 0000:02:00.0: Wait for controller to be ready for doorbell rings [ 1.390196] xhci_hcd 0000:02:00.0: Reset complete [ 1.390197] xhci_hcd 0000:02:00.0: Enabling 64-bit DMA addresses. [ 1.390198] xhci_hcd 0000:02:00.0: Calling HCD init [ 1.390199] xhci_hcd 0000:02:00.0: xhci_init [ 1.390200] xhci_hcd 0000:02:00.0: xHCI doesn't need link TRB QUIRK [ 1.390202] xhci_hcd 0000:02:00.0: Supported page size register = 0x1 [ 1.390204] xhci_hcd 0000:02:00.0: Supported page size of 4K [ 1.390205] xhci_hcd 0000:02:00.0: HCD page size set to 4K [ 1.390207] xhci_hcd 0000:02:00.0: // xHC can handle at most 64 device slots. [ 1.390209] xhci_hcd 0000:02:00.0: // Setting Max device slots reg = 0x40. [ 1.390213] xhci_hcd 0000:02:00.0: // Device context base array address = 0x1000 (DMA), ffff88042aea4000 (virt) [ 1.390216] xhci_hcd 0000:02:00.0: Allocated command ring at ffff88042b4d1d80 [ 1.390217] xhci_hcd 0000:02:00.0: First segment DMA is 0x2000 [ 1.390220] xhci_hcd 0000:02:00.0: // Setting command ring address to 0x40 [ 1.390223] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr low bits + flags = @00000000 [ 1.390225] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr high bits = @00000000 [ 1.390228] xhci_hcd 0000:02:00.0: // Doorbell array is located at offset 0x3000 from cap regs base addr [ 1.390229] xhci_hcd 0000:02:00.0: // xHCI capability registers at ffffc90011cd0000: [ 1.390231] xhci_hcd 0000:02:00.0: // @ffffc90011cd0000 = 0x1000020 (CAPLENGTH AND HCIVERSION) [ 1.390232] xhci_hcd 0000:02:00.0: // CAPLENGTH: 0x20 [ 1.390234] xhci_hcd 0000:02:00.0: // xHCI operational registers at ffffc90011cd0020: [ 1.390236] xhci_hcd 0000:02:00.0: // @ffffc90011cd0018 = 0x2000 RTSOFF [ 1.390237] xhci_hcd 0000:02:00.0: // xHCI runtime registers at ffffc90011cd2000: [ 1.390239] xhci_hcd 0000:02:00.0: // @ffffc90011cd0014 = 0x3000 DBOFF [ 1.390240] xhci_hcd 0000:02:00.0: // Doorbell array at ffffc90011cd3000: [ 1.390241] xhci_hcd 0000:02:00.0: xHCI runtime registers at ffffc90011cd2000: [ 1.390243] xhci_hcd 0000:02:00.0: ffffc90011cd2000: Microframe index = 0x0 [ 1.390250] xhci_hcd 0000:02:00.0: // Allocating event ring [ 1.390252] xhci_hcd 0000:02:00.0: TRB math tests passed. [ 1.390254] xhci_hcd 0000:02:00.0: // Allocated event ring segment table at 0x4000 [ 1.390255] xhci_hcd 0000:02:00.0: Set ERST to 0; private num segs = 1, virt addr = ffff88042aea1000, dma addr = 0x4000 [ 1.390257] xhci_hcd 0000:02:00.0: // Write ERST size = 1 to ir_set 0 (some bits preserved) [ 1.390259] xhci_hcd 0000:02:00.0: // Set ERST entries to point to event ring. [ 1.390260] xhci_hcd 0000:02:00.0: // Set ERST base address for ir_set 0 = 0x4000 [ 1.390265] xhci_hcd 0000:02:00.0: // Write event ring dequeue pointer, preserving EHB bit [ 1.390266] xhci_hcd 0000:02:00.0: Wrote ERST address to ir_set 0. [ 1.390268] xhci_hcd 0000:02:00.0: Allocating 4 scratchpad buffers [ 1.390279] xhci_hcd 0000:02:00.0: Ext Cap ffffc90011cd1010, port offset = 1, count = 2, revision = 0x2 [ 1.390280] xhci_hcd 0000:02:00.0: xHCI 1.0: support USB2 software lpm [ 1.390283] xhci_hcd 0000:02:00.0: Ext Cap ffffc90011cd1020, port offset = 3, count = 2, revision = 0x3 [ 1.390285] xhci_hcd 0000:02:00.0: Found 2 USB 2.0 ports and 2 USB 3.0 ports. [ 1.390286] xhci_hcd 0000:02:00.0: USB 2.0 port at index 0, addr = ffffc90011cd0420 [ 1.390288] xhci_hcd 0000:02:00.0: USB 2.0 port at index 1, addr = ffffc90011cd0430 [ 1.390289] xhci_hcd 0000:02:00.0: USB 3.0 port at index 2, addr = ffffc90011cd0440 [ 1.390290] xhci_hcd 0000:02:00.0: USB 3.0 port at index 3, addr = ffffc90011cd0450 [ 1.390292] xhci_hcd 0000:02:00.0: Finished xhci_init [ 1.390293] xhci_hcd 0000:02:00.0: Called HCD init [ 1.390295] xhci_hcd 0000:02:00.0: Got SBRN 48 [ 1.390299] xhci_hcd 0000:02:00.0: MWI active [ 1.390300] xhci_hcd 0000:02:00.0: Finished xhci_pci_reinit [ 1.390301] xhci_hcd 0000:02:00.0: supports USB remote wakeup [ 1.390302] xhci_hcd 0000:02:00.0: xhci_run [ 1.390304] xhci_hcd 0000:02:00.0: Failed to enable MSI-X [ 1.390320] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X [ 1.390337] xhci_hcd 0000:02:00.0: Command ring memory map follows: [ 1.390339] xhci_hcd 0000:02:00.0: @0000000000002000 00000000 00000000 00000000 00000000 [ 1.390341] xhci_hcd 0000:02:00.0: @0000000000002010 00000000 00000000 00000000 00000000 [ 1.390351] xhci_hcd 0000:02:00.0: @0000000000002020 00000000 00000000 00000000 00000000 [ 1.390352] xhci_hcd 0000:02:00.0: @0000000000002030 00000000 00000000 00000000 00000000 [ 1.390354] xhci_hcd 0000:02:00.0: @0000000000002040 00000000 00000000 00000000 00000000 [ 1.390355] xhci_hcd 0000:02:00.0: @0000000000002050 00000000 00000000 00000000 00000000 [ 1.390357] xhci_hcd 0000:02:00.0: @0000000000002060 00000000 00000000 00000000 00000000 [ 1.390358] xhci_hcd 0000:02:00.0: @0000000000002070 00000000 00000000 00000000 00000000 [ 1.390359] xhci_hcd 0000:02:00.0: @0000000000002080 00000000 00000000 00000000 00000000 [ 1.390361] xhci_hcd 0000:02:00.0: @0000000000002090 00000000 00000000 00000000 00000000 [ 1.390362] xhci_hcd 0000:02:00.0: @00000000000020a0 00000000 00000000 00000000 00000000 [ 1.390364] xhci_hcd 0000:02:00.0: @00000000000020b0 00000000 00000000 00000000 00000000 [ 1.390365] xhci_hcd 0000:02:00.0: @00000000000020c0 00000000 00000000 00000000 00000000 [ 1.390366] xhci_hcd 0000:02:00.0: @00000000000020d0 00000000 00000000 00000000 00000000 [ 1.390368] xhci_hcd 0000:02:00.0: @00000000000020e0 00000000 00000000 00000000 00000000 [ 1.390369] xhci_hcd 0000:02:00.0: @00000000000020f0 00000000 00000000 00000000 00000000 [ 1.390371] xhci_hcd 0000:02:00.0: @0000000000002100 00000000 00000000 00000000 00000000 [ 1.390372] xhci_hcd 0000:02:00.0: @0000000000002110 00000000 00000000 00000000 00000000 [ 1.390373] xhci_hcd 0000:02:00.0: @0000000000002120 00000000 00000000 00000000 00000000 [ 1.390375] xhci_hcd 0000:02:00.0: @0000000000002130 00000000 00000000 00000000 00000000 [ 1.390376] xhci_hcd 0000:02:00.0: @0000000000002140 00000000 00000000 00000000 00000000 [ 1.390377] xhci_hcd 0000:02:00.0: @0000000000002150 00000000 00000000 00000000 00000000 [ 1.390379] xhci_hcd 0000:02:00.0: @0000000000002160 00000000 00000000 00000000 00000000 [ 1.390380] xhci_hcd 0000:02:00.0: @0000000000002170 00000000 00000000 00000000 00000000 [ 1.390382] xhci_hcd 0000:02:00.0: @0000000000002180 00000000 00000000 00000000 00000000 [ 1.390383] xhci_hcd 0000:02:00.0: @0000000000002190 00000000 00000000 00000000 00000000 [ 1.390384] xhci_hcd 0000:02:00.0: @00000000000021a0 00000000 00000000 00000000 00000000 [ 1.390386] xhci_hcd 0000:02:00.0: @00000000000021b0 00000000 00000000 00000000 00000000 [ 1.390387] xhci_hcd 0000:02:00.0: @00000000000021c0 00000000 00000000 00000000 00000000 [ 1.390388] xhci_hcd 0000:02:00.0: @00000000000021d0 00000000 00000000 00000000 00000000 [ 1.390390] xhci_hcd 0000:02:00.0: @00000000000021e0 00000000 00000000 00000000 00000000 [ 1.390391] xhci_hcd 0000:02:00.0: @00000000000021f0 00000000 00000000 00000000 00000000 [ 1.390393] xhci_hcd 0000:02:00.0: @0000000000002200 00000000 00000000 00000000 00000000 [ 1.390394] xhci_hcd 0000:02:00.0: @0000000000002210 00000000 00000000 00000000 00000000 [ 1.390395] xhci_hcd 0000:02:00.0: @0000000000002220 00000000 00000000 00000000 00000000 [ 1.390397] xhci_hcd 0000:02:00.0: @0000000000002230 00000000 00000000 00000000 00000000 [ 1.390398] xhci_hcd 0000:02:00.0: @0000000000002240 00000000 00000000 00000000 00000000 [ 1.390399] xhci_hcd 0000:02:00.0: @0000000000002250 00000000 00000000 00000000 00000000 [ 1.390401] xhci_hcd 0000:02:00.0: @0000000000002260 00000000 00000000 00000000 00000000 [ 1.390402] xhci_hcd 0000:02:00.0: @0000000000002270 00000000 00000000 00000000 00000000 [ 1.390403] xhci_hcd 0000:02:00.0: @0000000000002280 00000000 00000000 00000000 00000000 [ 1.390405] xhci_hcd 0000:02:00.0: @0000000000002290 00000000 00000000 00000000 00000000 [ 1.390406] xhci_hcd 0000:02:00.0: @00000000000022a0 00000000 00000000 00000000 00000000 [ 1.390408] xhci_hcd 0000:02:00.0: @00000000000022b0 00000000 00000000 00000000 00000000 [ 1.390409] xhci_hcd 0000:02:00.0: @00000000000022c0 00000000 00000000 00000000 00000000 [ 1.390410] xhci_hcd 0000:02:00.0: @00000000000022d0 00000000 00000000 00000000 00000000 [ 1.390412] xhci_hcd 0000:02:00.0: @00000000000022e0 00000000 00000000 00000000 00000000 [ 1.390413] xhci_hcd 0000:02:00.0: @00000000000022f0 00000000 00000000 00000000 00000000 [ 1.390414] xhci_hcd 0000:02:00.0: @0000000000002300 00000000 00000000 00000000 00000000 [ 1.390416] xhci_hcd 0000:02:00.0: @0000000000002310 00000000 00000000 00000000 00000000 [ 1.390417] xhci_hcd 0000:02:00.0: @0000000000002320 00000000 00000000 00000000 00000000 [ 1.390419] xhci_hcd 0000:02:00.0: @0000000000002330 00000000 00000000 00000000 00000000 [ 1.390420] xhci_hcd 0000:02:00.0: @0000000000002340 00000000 00000000 00000000 00000000 [ 1.390421] xhci_hcd 0000:02:00.0: @0000000000002350 00000000 00000000 00000000 00000000 [ 1.390423] xhci_hcd 0000:02:00.0: @0000000000002360 00000000 00000000 00000000 00000000 [ 1.390424] xhci_hcd 0000:02:00.0: @0000000000002370 00000000 00000000 00000000 00000000 [ 1.390425] xhci_hcd 0000:02:00.0: @0000000000002380 00000000 00000000 00000000 00000000 [ 1.390427] xhci_hcd 0000:02:00.0: @0000000000002390 00000000 00000000 00000000 00000000 [ 1.390428] xhci_hcd 0000:02:00.0: @00000000000023a0 00000000 00000000 00000000 00000000 [ 1.390430] xhci_hcd 0000:02:00.0: @00000000000023b0 00000000 00000000 00000000 00000000 [ 1.390431] xhci_hcd 0000:02:00.0: @00000000000023c0 00000000 00000000 00000000 00000000 [ 1.390432] xhci_hcd 0000:02:00.0: @00000000000023d0 00000000 00000000 00000000 00000000 [ 1.390434] xhci_hcd 0000:02:00.0: @00000000000023e0 00000000 00000000 00000000 00000000 [ 1.390435] xhci_hcd 0000:02:00.0: @00000000000023f0 00002000 00000000 00000000 00001802 [ 1.390436] xhci_hcd 0000:02:00.0: Ring has not been updated [ 1.390438] xhci_hcd 0000:02:00.0: Ring deq = ffff88042aea5000 (virt), 0x2000 (dma) [ 1.390439] xhci_hcd 0000:02:00.0: Ring deq updated 0 times [ 1.390440] xhci_hcd 0000:02:00.0: Ring enq = ffff88042aea5000 (virt), 0x2000 (dma) [ 1.390441] xhci_hcd 0000:02:00.0: Ring enq updated 0 times [ 1.390444] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr low bits + flags = @00000000 [ 1.390445] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr high bits = @00000000 [ 1.390446] xhci_hcd 0000:02:00.0: ERST memory map follows: [ 1.390448] xhci_hcd 0000:02:00.0: @0000000000004000 00002400 00000000 00000040 00000000 [ 1.390449] xhci_hcd 0000:02:00.0: Event ring: [ 1.390450] xhci_hcd 0000:02:00.0: @0000000000002400 00000000 00000000 00000000 00000000 [ 1.390452] xhci_hcd 0000:02:00.0: @0000000000002410 00000000 00000000 00000000 00000000 [ 1.390453] xhci_hcd 0000:02:00.0: @0000000000002420 00000000 00000000 00000000 00000000 [ 1.390454] xhci_hcd 0000:02:00.0: @0000000000002430 00000000 00000000 00000000 00000000 [ 1.390456] xhci_hcd 0000:02:00.0: @0000000000002440 00000000 00000000 00000000 00000000 [ 1.390457] xhci_hcd 0000:02:00.0: @0000000000002450 00000000 00000000 00000000 00000000 [ 1.390458] xhci_hcd 0000:02:00.0: @0000000000002460 00000000 00000000 00000000 00000000 [ 1.390460] xhci_hcd 0000:02:00.0: @0000000000002470 00000000 00000000 00000000 00000000 [ 1.390461] xhci_hcd 0000:02:00.0: @0000000000002480 00000000 00000000 00000000 00000000 [ 1.390463] xhci_hcd 0000:02:00.0: @0000000000002490 00000000 00000000 00000000 00000000 [ 1.390464] xhci_hcd 0000:02:00.0: @00000000000024a0 00000000 00000000 00000000 00000000 [ 1.390465] xhci_hcd 0000:02:00.0: @00000000000024b0 00000000 00000000 00000000 00000000 [ 1.390467] xhci_hcd 0000:02:00.0: @00000000000024c0 00000000 00000000 00000000 00000000 [ 1.390468] xhci_hcd 0000:02:00.0: @00000000000024d0 00000000 00000000 00000000 00000000 [ 1.390469] xhci_hcd 0000:02:00.0: @00000000000024e0 00000000 00000000 00000000 00000000 [ 1.390471] xhci_hcd 0000:02:00.0: @00000000000024f0 00000000 00000000 00000000 00000000 [ 1.390472] xhci_hcd 0000:02:00.0: @0000000000002500 00000000 00000000 00000000 00000000 [ 1.390473] xhci_hcd 0000:02:00.0: @0000000000002510 00000000 00000000 00000000 00000000 [ 1.390475] xhci_hcd 0000:02:00.0: @0000000000002520 00000000 00000000 00000000 00000000 [ 1.390476] xhci_hcd 0000:02:00.0: @0000000000002530 00000000 00000000 00000000 00000000 [ 1.390477] xhci_hcd 0000:02:00.0: @0000000000002540 00000000 00000000 00000000 00000000 [ 1.390479] xhci_hcd 0000:02:00.0: @0000000000002550 00000000 00000000 00000000 00000000 [ 1.390480] xhci_hcd 0000:02:00.0: @0000000000002560 00000000 00000000 00000000 00000000 [ 1.390482] xhci_hcd 0000:02:00.0: @0000000000002570 00000000 00000000 00000000 00000000 [ 1.390483] xhci_hcd 0000:02:00.0: @0000000000002580 00000000 00000000 00000000 00000000 [ 1.390484] xhci_hcd 0000:02:00.0: @0000000000002590 00000000 00000000 00000000 00000000 [ 1.390486] xhci_hcd 0000:02:00.0: @00000000000025a0 00000000 00000000 00000000 00000000 [ 1.390487] xhci_hcd 0000:02:00.0: @00000000000025b0 00000000 00000000 00000000 00000000 [ 1.390488] xhci_hcd 0000:02:00.0: @00000000000025c0 00000000 00000000 00000000 00000000 [ 1.390490] xhci_hcd 0000:02:00.0: @00000000000025d0 00000000 00000000 00000000 00000000 [ 1.390491] xhci_hcd 0000:02:00.0: @00000000000025e0 00000000 00000000 00000000 00000000 [ 1.390492] xhci_hcd 0000:02:00.0: @00000000000025f0 00000000 00000000 00000000 00000000 [ 1.390494] xhci_hcd 0000:02:00.0: @0000000000002600 00000000 00000000 00000000 00000000 [ 1.390495] xhci_hcd 0000:02:00.0: @0000000000002610 00000000 00000000 00000000 00000000 [ 1.390497] xhci_hcd 0000:02:00.0: @0000000000002620 00000000 00000000 00000000 00000000 [ 1.390498] xhci_hcd 0000:02:00.0: @0000000000002630 00000000 00000000 00000000 00000000 [ 1.390499] xhci_hcd 0000:02:00.0: @0000000000002640 00000000 00000000 00000000 00000000 [ 1.390501] xhci_hcd 0000:02:00.0: @0000000000002650 00000000 00000000 00000000 00000000 [ 1.390502] xhci_hcd 0000:02:00.0: @0000000000002660 00000000 00000000 00000000 00000000 [ 1.390503] xhci_hcd 0000:02:00.0: @0000000000002670 00000000 00000000 00000000 00000000 [ 1.390505] xhci_hcd 0000:02:00.0: @0000000000002680 00000000 00000000 00000000 00000000 [ 1.390506] xhci_hcd 0000:02:00.0: @0000000000002690 00000000 00000000 00000000 00000000 [ 1.390507] xhci_hcd 0000:02:00.0: @00000000000026a0 00000000 00000000 00000000 00000000 [ 1.390509] xhci_hcd 0000:02:00.0: @00000000000026b0 00000000 00000000 00000000 00000000 [ 1.390510] xhci_hcd 0000:02:00.0: @00000000000026c0 00000000 00000000 00000000 00000000 [ 1.390511] xhci_hcd 0000:02:00.0: @00000000000026d0 00000000 00000000 00000000 00000000 [ 1.390513] xhci_hcd 0000:02:00.0: @00000000000026e0 00000000 00000000 00000000 00000000 [ 1.390514] xhci_hcd 0000:02:00.0: @00000000000026f0 00000000 00000000 00000000 00000000 [ 1.390516] xhci_hcd 0000:02:00.0: @0000000000002700 00000000 00000000 00000000 00000000 [ 1.390517] xhci_hcd 0000:02:00.0: @0000000000002710 00000000 00000000 00000000 00000000 [ 1.390518] xhci_hcd 0000:02:00.0: @0000000000002720 00000000 00000000 00000000 00000000 [ 1.390520] xhci_hcd 0000:02:00.0: @0000000000002730 00000000 00000000 00000000 00000000 [ 1.390521] xhci_hcd 0000:02:00.0: @0000000000002740 00000000 00000000 00000000 00000000 [ 1.390522] xhci_hcd 0000:02:00.0: @0000000000002750 00000000 00000000 00000000 00000000 [ 1.390524] xhci_hcd 0000:02:00.0: @0000000000002760 00000000 00000000 00000000 00000000 [ 1.390525] xhci_hcd 0000:02:00.0: @0000000000002770 00000000 00000000 00000000 00000000 [ 1.390526] xhci_hcd 0000:02:00.0: @0000000000002780 00000000 00000000 00000000 00000000 [ 1.390528] xhci_hcd 0000:02:00.0: @0000000000002790 00000000 00000000 00000000 00000000 [ 1.390529] xhci_hcd 0000:02:00.0: @00000000000027a0 00000000 00000000 00000000 00000000 [ 1.390531] xhci_hcd 0000:02:00.0: @00000000000027b0 00000000 00000000 00000000 00000000 [ 1.390532] xhci_hcd 0000:02:00.0: @00000000000027c0 00000000 00000000 00000000 00000000 [ 1.390533] xhci_hcd 0000:02:00.0: @00000000000027d0 00000000 00000000 00000000 00000000 [ 1.390535] xhci_hcd 0000:02:00.0: @00000000000027e0 00000000 00000000 00000000 00000000 [ 1.390536] xhci_hcd 0000:02:00.0: @00000000000027f0 00000000 00000000 00000000 00000000 [ 1.390537] xhci_hcd 0000:02:00.0: Ring has not been updated [ 1.390538] xhci_hcd 0000:02:00.0: Ring deq = ffff88042aea5400 (virt), 0x2400 (dma) [ 1.390539] xhci_hcd 0000:02:00.0: Ring deq updated 0 times [ 1.390541] xhci_hcd 0000:02:00.0: Ring enq = ffff88042aea5400 (virt), 0x2400 (dma) [ 1.390542] xhci_hcd 0000:02:00.0: Ring enq updated 0 times [ 1.390545] xhci_hcd 0000:02:00.0: ERST deq = 64'h2400 [ 1.390546] xhci_hcd 0000:02:00.0: // Set the interrupt modulation register [ 1.390549] xhci_hcd 0000:02:00.0: // Enable interrupts, cmd = 0x4. [ 1.390551] xhci_hcd 0000:02:00.0: // Enabling event ring interrupter ffffc90011cd2020 by writing 0x2 to irq_pending [ 1.390553] xhci_hcd 0000:02:00.0: ffffc90011cd2020: ir_set[0] [ 1.390554] xhci_hcd 0000:02:00.0: ffffc90011cd2020: ir_set.pending = 0x2 [ 1.390556] xhci_hcd 0000:02:00.0: ffffc90011cd2024: ir_set.control = 0xa0 [ 1.390558] xhci_hcd 0000:02:00.0: ffffc90011cd2028: ir_set.erst_size = 0x1 [ 1.390562] xhci_hcd 0000:02:00.0: ffffc90011cd2030: ir_set.erst_base = @00004000 [ 1.390565] xhci_hcd 0000:02:00.0: ffffc90011cd2038: ir_set.erst_dequeue = @00002400 [ 1.390566] xhci_hcd 0000:02:00.0: Finished xhci_run for USB2 roothub [ 1.390576] usb usb8: default language 0x0409 [ 1.390584] usb usb8: udev 1, busnum 8, minor = 896 [ 1.390585] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.390587] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.390588] usb usb8: Product: xHCI Host Controller [ 1.390589] usb usb8: Manufacturer: Linux 3.12.0-rc7 xhci_hcd [ 1.390590] usb usb8: SerialNumber: 0000:02:00.0 [ 1.390670] usb usb8: usb_probe_device [ 1.390672] usb usb8: configuration #1 chosen from 1 choice [ 1.390674] xHCI xhci_add_endpoint called for root hub [ 1.390675] xHCI xhci_check_bandwidth called for root hub [ 1.390680] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 1.390728] hub 8-0:1.0: usb_probe_interface [ 1.390729] hub 8-0:1.0: usb_probe_interface - got id [ 1.390731] hub 8-0:1.0: USB hub found [ 1.390737] hub 8-0:1.0: 2 ports detected [ 1.390738] hub 8-0:1.0: standalone hub [ 1.390739] hub 8-0:1.0: no power switching (usb 1.0) [ 1.390740] hub 8-0:1.0: individual port over-current protection [ 1.390741] hub 8-0:1.0: Single TT [ 1.390742] hub 8-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.390743] hub 8-0:1.0: power on to power good time: 20ms [ 1.390748] hub 8-0:1.0: local power source is good [ 1.390762] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 1.390766] xhci_hcd 0000:02:00.0: set port power, actual port 0 status = 0x2a0 [ 1.390773] xhci_hcd 0000:02:00.0: set port power, actual port 1 status = 0x2a0 [ 1.390794] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.390861] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 1.390863] xhci_hcd 0000:02:00.0: supports USB remote wakeup [ 1.390865] xhci_hcd 0000:02:00.0: // Turn on HC, cmd = 0x5. [ 1.390867] xhci_hcd 0000:02:00.0: Finished xhci_run for USB3 roothub [ 1.390882] usb usb9: skipped 1 descriptor after endpoint [ 1.390885] usb usb9: default language 0x0409 [ 1.390892] usb usb9: udev 1, busnum 9, minor = 1024 [ 1.390894] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.390895] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.390896] usb usb9: Product: xHCI Host Controller [ 1.390897] usb usb9: Manufacturer: Linux 3.12.0-rc7 xhci_hcd [ 1.390899] usb usb9: SerialNumber: 0000:02:00.0 [ 1.390982] usb usb9: usb_probe_device [ 1.390983] usb usb9: configuration #1 chosen from 1 choice [ 1.390985] xHCI xhci_add_endpoint called for root hub [ 1.390985] xHCI xhci_check_bandwidth called for root hub [ 1.390990] usb usb9: adding 9-0:1.0 (config #1, interface 0) [ 1.391037] hub 9-0:1.0: usb_probe_interface [ 1.391038] hub 9-0:1.0: usb_probe_interface - got id [ 1.391040] hub 9-0:1.0: USB hub found [ 1.391045] hub 9-0:1.0: 2 ports detected [ 1.391046] hub 9-0:1.0: standalone hub [ 1.391047] hub 9-0:1.0: no power switching (usb 1.0) [ 1.391048] hub 9-0:1.0: individual port over-current protection [ 1.391050] hub 9-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.391051] hub 9-0:1.0: power on to power good time: 20ms [ 1.391055] hub 9-0:1.0: local power source is good [ 1.391066] hub 9-0:1.0: trying to enable port power on non-switchable hub [ 1.391070] xhci_hcd 0000:02:00.0: set port power, actual port 0 status = 0x2a0 [ 1.391076] xhci_hcd 0000:02:00.0: set port power, actual port 1 status = 0x2a0 [ 1.403519] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.403684] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10 [ 1.403693] xhci_hcd 0000:04:00.0: xHCI capability registers at ffffc90011ce0000: [ 1.403696] xhci_hcd 0000:04:00.0: CAPLENGTH AND HCIVERSION 0x1000020: [ 1.403697] xhci_hcd 0000:04:00.0: CAPLENGTH: 0x20 [ 1.403698] xhci_hcd 0000:04:00.0: HCIVERSION: 0x100 [ 1.403700] xhci_hcd 0000:04:00.0: HCSPARAMS 1: 0x4000440 [ 1.403701] xhci_hcd 0000:04:00.0: Max device slots: 64 [ 1.403702] xhci_hcd 0000:04:00.0: Max interrupters: 4 [ 1.403703] xhci_hcd 0000:04:00.0: Max ports: 4 [ 1.403705] xhci_hcd 0000:04:00.0: HCSPARAMS 2: 0x240000f9 [ 1.403706] xhci_hcd 0000:04:00.0: Isoc scheduling threshold: 9 [ 1.403707] xhci_hcd 0000:04:00.0: Maximum allowed segments in event ring: 15 [ 1.403709] xhci_hcd 0000:04:00.0: HCSPARAMS 3 0x7ff0003: [ 1.403710] xhci_hcd 0000:04:00.0: Worst case U1 device exit latency: 3 [ 1.403712] xhci_hcd 0000:04:00.0: Worst case U2 device exit latency: 2047 [ 1.403714] xhci_hcd 0000:04:00.0: HCC PARAMS 0x40040a5: [ 1.403715] xhci_hcd 0000:04:00.0: HC generates 64 bit addresses [ 1.403716] xhci_hcd 0000:04:00.0: FIXME: more HCCPARAMS debugging [ 1.403718] xhci_hcd 0000:04:00.0: RTSOFF 0x2000: [ 1.403719] xhci_hcd 0000:04:00.0: xHCI operational registers at ffffc90011ce0020: [ 1.403721] xhci_hcd 0000:04:00.0: USBCMD 0x0: [ 1.403722] xhci_hcd 0000:04:00.0: HC is being stopped [ 1.403723] xhci_hcd 0000:04:00.0: HC has finished hard reset [ 1.403724] xhci_hcd 0000:04:00.0: Event Interrupts disabled [ 1.403725] xhci_hcd 0000:04:00.0: Host System Error Interrupts disabled [ 1.403726] xhci_hcd 0000:04:00.0: HC has finished light reset [ 1.403728] xhci_hcd 0000:04:00.0: USBSTS 0x1: [ 1.403729] xhci_hcd 0000:04:00.0: Event ring is empty [ 1.403730] xhci_hcd 0000:04:00.0: No Host System Error [ 1.403732] xhci_hcd 0000:04:00.0: HC is halted [ 1.403734] xhci_hcd 0000:04:00.0: ffffc90011ce0420 port status reg = 0x2a0 [ 1.403736] xhci_hcd 0000:04:00.0: ffffc90011ce0424 port power reg = 0x0 [ 1.403738] xhci_hcd 0000:04:00.0: ffffc90011ce0428 port link reg = 0x0 [ 1.403740] xhci_hcd 0000:04:00.0: ffffc90011ce042c port reserved reg = 0x0 [ 1.403743] xhci_hcd 0000:04:00.0: ffffc90011ce0430 port status reg = 0x2a0 [ 1.403745] xhci_hcd 0000:04:00.0: ffffc90011ce0434 port power reg = 0x0 [ 1.403747] xhci_hcd 0000:04:00.0: ffffc90011ce0438 port link reg = 0x0 [ 1.403749] xhci_hcd 0000:04:00.0: ffffc90011ce043c port reserved reg = 0x0 [ 1.403751] xhci_hcd 0000:04:00.0: ffffc90011ce0440 port status reg = 0x2a0 [ 1.403754] xhci_hcd 0000:04:00.0: ffffc90011ce0444 port power reg = 0x0 [ 1.403756] xhci_hcd 0000:04:00.0: ffffc90011ce0448 port link reg = 0x0 [ 1.403758] xhci_hcd 0000:04:00.0: ffffc90011ce044c port reserved reg = 0x0 [ 1.403760] xhci_hcd 0000:04:00.0: ffffc90011ce0450 port status reg = 0x2a0 [ 1.403762] xhci_hcd 0000:04:00.0: ffffc90011ce0454 port power reg = 0x0 [ 1.403765] xhci_hcd 0000:04:00.0: ffffc90011ce0458 port link reg = 0x0 [ 1.403767] xhci_hcd 0000:04:00.0: ffffc90011ce045c port reserved reg = 0x0 [ 1.403768] xhci_hcd 0000:04:00.0: QUIRK: Resetting on resume [ 1.403769] xhci_hcd 0000:04:00.0: // Halt the HC [ 1.403773] xhci_hcd 0000:04:00.0: Resetting HCD [ 1.403775] xhci_hcd 0000:04:00.0: // Reset the HC [ 1.403780] xhci_hcd 0000:04:00.0: Wait for controller to be ready for doorbell rings [ 1.403781] xhci_hcd 0000:04:00.0: Reset complete [ 1.403783] xhci_hcd 0000:04:00.0: Enabling 64-bit DMA addresses. [ 1.403784] xhci_hcd 0000:04:00.0: Calling HCD init [ 1.403785] xhci_hcd 0000:04:00.0: xhci_init [ 1.403786] xhci_hcd 0000:04:00.0: xHCI doesn't need link TRB QUIRK [ 1.403788] xhci_hcd 0000:04:00.0: Supported page size register = 0x1 [ 1.403789] xhci_hcd 0000:04:00.0: Supported page size of 4K [ 1.403790] xhci_hcd 0000:04:00.0: HCD page size set to 4K [ 1.403792] xhci_hcd 0000:04:00.0: // xHC can handle at most 64 device slots. [ 1.403795] xhci_hcd 0000:04:00.0: // Setting Max device slots reg = 0x40. [ 1.403798] xhci_hcd 0000:04:00.0: // Device context base array address = 0x1000 (DMA), ffff88042b625000 (virt) [ 1.403801] xhci_hcd 0000:04:00.0: Allocated command ring at ffff88042ae86780 [ 1.403802] xhci_hcd 0000:04:00.0: First segment DMA is 0x2000 [ 1.403805] xhci_hcd 0000:04:00.0: // Setting command ring address to 0x40 [ 1.403808] xhci_hcd 0000:04:00.0: // xHC command ring deq ptr low bits + flags = @00000000 [ 1.403809] xhci_hcd 0000:04:00.0: // xHC command ring deq ptr high bits = @00000000 [ 1.403812] xhci_hcd 0000:04:00.0: // Doorbell array is located at offset 0x3000 from cap regs base addr [ 1.403814] xhci_hcd 0000:04:00.0: // xHCI capability registers at ffffc90011ce0000: [ 1.403816] xhci_hcd 0000:04:00.0: // @ffffc90011ce0000 = 0x1000020 (CAPLENGTH AND HCIVERSION) [ 1.403817] xhci_hcd 0000:04:00.0: // CAPLENGTH: 0x20 [ 1.403818] xhci_hcd 0000:04:00.0: // xHCI operational registers at ffffc90011ce0020: [ 1.403820] xhci_hcd 0000:04:00.0: // @ffffc90011ce0018 = 0x2000 RTSOFF [ 1.403821] xhci_hcd 0000:04:00.0: // xHCI runtime registers at ffffc90011ce2000: [ 1.403823] xhci_hcd 0000:04:00.0: // @ffffc90011ce0014 = 0x3000 DBOFF [ 1.403825] xhci_hcd 0000:04:00.0: // Doorbell array at ffffc90011ce3000: [ 1.403826] xhci_hcd 0000:04:00.0: xHCI runtime registers at ffffc90011ce2000: [ 1.403828] xhci_hcd 0000:04:00.0: ffffc90011ce2000: Microframe index = 0x0 [ 1.403834] xhci_hcd 0000:04:00.0: // Allocating event ring [ 1.403836] xhci_hcd 0000:04:00.0: TRB math tests passed. [ 1.403838] xhci_hcd 0000:04:00.0: // Allocated event ring segment table at 0x4000 [ 1.403840] xhci_hcd 0000:04:00.0: Set ERST to 0; private num segs = 1, virt addr = ffff88042b5b8000, dma addr = 0x4000 [ 1.403842] xhci_hcd 0000:04:00.0: // Write ERST size = 1 to ir_set 0 (some bits preserved) [ 1.403843] xhci_hcd 0000:04:00.0: // Set ERST entries to point to event ring. [ 1.403844] xhci_hcd 0000:04:00.0: // Set ERST base address for ir_set 0 = 0x4000 [ 1.403849] xhci_hcd 0000:04:00.0: // Write event ring dequeue pointer, preserving EHB bit [ 1.403850] xhci_hcd 0000:04:00.0: Wrote ERST address to ir_set 0. [ 1.403853] xhci_hcd 0000:04:00.0: Allocating 4 scratchpad buffers [ 1.403864] xhci_hcd 0000:04:00.0: Ext Cap ffffc90011ce1010, port offset = 1, count = 2, revision = 0x2 [ 1.403865] xhci_hcd 0000:04:00.0: xHCI 1.0: support USB2 software lpm [ 1.403868] xhci_hcd 0000:04:00.0: Ext Cap ffffc90011ce1020, port offset = 3, count = 2, revision = 0x3 [ 1.403869] xhci_hcd 0000:04:00.0: Found 2 USB 2.0 ports and 2 USB 3.0 ports. [ 1.403871] xhci_hcd 0000:04:00.0: USB 2.0 port at index 0, addr = ffffc90011ce0420 [ 1.403872] xhci_hcd 0000:04:00.0: USB 2.0 port at index 1, addr = ffffc90011ce0430 [ 1.403873] xhci_hcd 0000:04:00.0: USB 3.0 port at index 2, addr = ffffc90011ce0440 [ 1.403875] xhci_hcd 0000:04:00.0: USB 3.0 port at index 3, addr = ffffc90011ce0450 [ 1.403877] xhci_hcd 0000:04:00.0: Finished xhci_init [ 1.403878] xhci_hcd 0000:04:00.0: Called HCD init [ 1.403880] xhci_hcd 0000:04:00.0: Got SBRN 48 [ 1.403884] xhci_hcd 0000:04:00.0: MWI active [ 1.403885] xhci_hcd 0000:04:00.0: Finished xhci_pci_reinit [ 1.403886] xhci_hcd 0000:04:00.0: supports USB remote wakeup [ 1.403887] xhci_hcd 0000:04:00.0: xhci_run [ 1.403888] xhci_hcd 0000:04:00.0: Failed to enable MSI-X [ 1.403905] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.403922] xhci_hcd 0000:04:00.0: Command ring memory map follows: [ 1.403924] xhci_hcd 0000:04:00.0: @0000000000002000 00000000 00000000 00000000 00000000 [ 1.403926] xhci_hcd 0000:04:00.0: @0000000000002010 00000000 00000000 00000000 00000000 [ 1.403927] xhci_hcd 0000:04:00.0: @0000000000002020 00000000 00000000 00000000 00000000 [ 1.403929] xhci_hcd 0000:04:00.0: @0000000000002030 00000000 00000000 00000000 00000000 [ 1.403930] xhci_hcd 0000:04:00.0: @0000000000002040 00000000 00000000 00000000 00000000 [ 1.403931] xhci_hcd 0000:04:00.0: @0000000000002050 00000000 00000000 00000000 00000000 [ 1.403933] xhci_hcd 0000:04:00.0: @0000000000002060 00000000 00000000 00000000 00000000 [ 1.403934] xhci_hcd 0000:04:00.0: @0000000000002070 00000000 00000000 00000000 00000000 [ 1.403935] xhci_hcd 0000:04:00.0: @0000000000002080 00000000 00000000 00000000 00000000 [ 1.403937] xhci_hcd 0000:04:00.0: @0000000000002090 00000000 00000000 00000000 00000000 [ 1.403938] xhci_hcd 0000:04:00.0: @00000000000020a0 00000000 00000000 00000000 00000000 [ 1.403939] xhci_hcd 0000:04:00.0: @00000000000020b0 00000000 00000000 00000000 00000000 [ 1.403941] xhci_hcd 0000:04:00.0: @00000000000020c0 00000000 00000000 00000000 00000000 [ 1.403942] xhci_hcd 0000:04:00.0: @00000000000020d0 00000000 00000000 00000000 00000000 [ 1.403943] xhci_hcd 0000:04:00.0: @00000000000020e0 00000000 00000000 00000000 00000000 [ 1.403945] xhci_hcd 0000:04:00.0: @00000000000020f0 00000000 00000000 00000000 00000000 [ 1.403946] xhci_hcd 0000:04:00.0: @0000000000002100 00000000 00000000 00000000 00000000 [ 1.403948] xhci_hcd 0000:04:00.0: @0000000000002110 00000000 00000000 00000000 00000000 [ 1.403949] xhci_hcd 0000:04:00.0: @0000000000002120 00000000 00000000 00000000 00000000 [ 1.403950] xhci_hcd 0000:04:00.0: @0000000000002130 00000000 00000000 00000000 00000000 [ 1.403952] xhci_hcd 0000:04:00.0: @0000000000002140 00000000 00000000 00000000 00000000 [ 1.403953] xhci_hcd 0000:04:00.0: @0000000000002150 00000000 00000000 00000000 00000000 [ 1.403954] xhci_hcd 0000:04:00.0: @0000000000002160 00000000 00000000 00000000 00000000 [ 1.403956] xhci_hcd 0000:04:00.0: @0000000000002170 00000000 00000000 00000000 00000000 [ 1.403957] xhci_hcd 0000:04:00.0: @0000000000002180 00000000 00000000 00000000 00000000 [ 1.403958] xhci_hcd 0000:04:00.0: @0000000000002190 00000000 00000000 00000000 00000000 [ 1.403960] xhci_hcd 0000:04:00.0: @00000000000021a0 00000000 00000000 00000000 00000000 [ 1.403961] xhci_hcd 0000:04:00.0: @00000000000021b0 00000000 00000000 00000000 00000000 [ 1.403962] xhci_hcd 0000:04:00.0: @00000000000021c0 00000000 00000000 00000000 00000000 [ 1.403964] xhci_hcd 0000:04:00.0: @00000000000021d0 00000000 00000000 00000000 00000000 [ 1.403965] xhci_hcd 0000:04:00.0: @00000000000021e0 00000000 00000000 00000000 00000000 [ 1.403966] xhci_hcd 0000:04:00.0: @00000000000021f0 00000000 00000000 00000000 00000000 [ 1.403968] xhci_hcd 0000:04:00.0: @0000000000002200 00000000 00000000 00000000 00000000 [ 1.403969] xhci_hcd 0000:04:00.0: @0000000000002210 00000000 00000000 00000000 00000000 [ 1.403970] xhci_hcd 0000:04:00.0: @0000000000002220 00000000 00000000 00000000 00000000 [ 1.403972] xhci_hcd 0000:04:00.0: @0000000000002230 00000000 00000000 00000000 00000000 [ 1.403973] xhci_hcd 0000:04:00.0: @0000000000002240 00000000 00000000 00000000 00000000 [ 1.403974] xhci_hcd 0000:04:00.0: @0000000000002250 00000000 00000000 00000000 00000000 [ 1.403976] xhci_hcd 0000:04:00.0: @0000000000002260 00000000 00000000 00000000 00000000 [ 1.403977] xhci_hcd 0000:04:00.0: @0000000000002270 00000000 00000000 00000000 00000000 [ 1.403978] xhci_hcd 0000:04:00.0: @0000000000002280 00000000 00000000 00000000 00000000 [ 1.403980] xhci_hcd 0000:04:00.0: @0000000000002290 00000000 00000000 00000000 00000000 [ 1.403981] xhci_hcd 0000:04:00.0: @00000000000022a0 00000000 00000000 00000000 00000000 [ 1.403982] xhci_hcd 0000:04:00.0: @00000000000022b0 00000000 00000000 00000000 00000000 [ 1.403984] xhci_hcd 0000:04:00.0: @00000000000022c0 00000000 00000000 00000000 00000000 [ 1.403985] xhci_hcd 0000:04:00.0: @00000000000022d0 00000000 00000000 00000000 00000000 [ 1.403986] xhci_hcd 0000:04:00.0: @00000000000022e0 00000000 00000000 00000000 00000000 [ 1.403988] xhci_hcd 0000:04:00.0: @00000000000022f0 00000000 00000000 00000000 00000000 [ 1.403989] xhci_hcd 0000:04:00.0: @0000000000002300 00000000 00000000 00000000 00000000 [ 1.403990] xhci_hcd 0000:04:00.0: @0000000000002310 00000000 00000000 00000000 00000000 [ 1.403992] xhci_hcd 0000:04:00.0: @0000000000002320 00000000 00000000 00000000 00000000 [ 1.403993] xhci_hcd 0000:04:00.0: @0000000000002330 00000000 00000000 00000000 00000000 [ 1.403994] xhci_hcd 0000:04:00.0: @0000000000002340 00000000 00000000 00000000 00000000 [ 1.403996] xhci_hcd 0000:04:00.0: @0000000000002350 00000000 00000000 00000000 00000000 [ 1.403997] xhci_hcd 0000:04:00.0: @0000000000002360 00000000 00000000 00000000 00000000 [ 1.403998] xhci_hcd 0000:04:00.0: @0000000000002370 00000000 00000000 00000000 00000000 [ 1.404000] xhci_hcd 0000:04:00.0: @0000000000002380 00000000 00000000 00000000 00000000 [ 1.404001] xhci_hcd 0000:04:00.0: @0000000000002390 00000000 00000000 00000000 00000000 [ 1.404002] xhci_hcd 0000:04:00.0: @00000000000023a0 00000000 00000000 00000000 00000000 [ 1.404004] xhci_hcd 0000:04:00.0: @00000000000023b0 00000000 00000000 00000000 00000000 [ 1.404005] xhci_hcd 0000:04:00.0: @00000000000023c0 00000000 00000000 00000000 00000000 [ 1.404006] xhci_hcd 0000:04:00.0: @00000000000023d0 00000000 00000000 00000000 00000000 [ 1.404008] xhci_hcd 0000:04:00.0: @00000000000023e0 00000000 00000000 00000000 00000000 [ 1.404009] xhci_hcd 0000:04:00.0: @00000000000023f0 00002000 00000000 00000000 00001802 [ 1.404010] xhci_hcd 0000:04:00.0: Ring has not been updated [ 1.404012] xhci_hcd 0000:04:00.0: Ring deq = ffff88042b626000 (virt), 0x2000 (dma) [ 1.404013] xhci_hcd 0000:04:00.0: Ring deq updated 0 times [ 1.404014] xhci_hcd 0000:04:00.0: Ring enq = ffff88042b626000 (virt), 0x2000 (dma) [ 1.404015] xhci_hcd 0000:04:00.0: Ring enq updated 0 times [ 1.404018] xhci_hcd 0000:04:00.0: // xHC command ring deq ptr low bits + flags = @00000000 [ 1.404019] xhci_hcd 0000:04:00.0: // xHC command ring deq ptr high bits = @00000000 [ 1.404020] xhci_hcd 0000:04:00.0: ERST memory map follows: [ 1.404022] xhci_hcd 0000:04:00.0: @0000000000004000 00002400 00000000 00000040 00000000 [ 1.404023] xhci_hcd 0000:04:00.0: Event ring: [ 1.404024] xhci_hcd 0000:04:00.0: @0000000000002400 00000000 00000000 00000000 00000000 [ 1.404025] xhci_hcd 0000:04:00.0: @0000000000002410 00000000 00000000 00000000 00000000 [ 1.404027] xhci_hcd 0000:04:00.0: @0000000000002420 00000000 00000000 00000000 00000000 [ 1.404028] xhci_hcd 0000:04:00.0: @0000000000002430 00000000 00000000 00000000 00000000 [ 1.404029] xhci_hcd 0000:04:00.0: @0000000000002440 00000000 00000000 00000000 00000000 [ 1.404031] xhci_hcd 0000:04:00.0: @0000000000002450 00000000 00000000 00000000 00000000 [ 1.404032] xhci_hcd 0000:04:00.0: @0000000000002460 00000000 00000000 00000000 00000000 [ 1.404033] xhci_hcd 0000:04:00.0: @0000000000002470 00000000 00000000 00000000 00000000 [ 1.404035] xhci_hcd 0000:04:00.0: @0000000000002480 00000000 00000000 00000000 00000000 [ 1.404036] xhci_hcd 0000:04:00.0: @0000000000002490 00000000 00000000 00000000 00000000 [ 1.404037] xhci_hcd 0000:04:00.0: @00000000000024a0 00000000 00000000 00000000 00000000 [ 1.404039] xhci_hcd 0000:04:00.0: @00000000000024b0 00000000 00000000 00000000 00000000 [ 1.404040] xhci_hcd 0000:04:00.0: @00000000000024c0 00000000 00000000 00000000 00000000 [ 1.404041] xhci_hcd 0000:04:00.0: @00000000000024d0 00000000 00000000 00000000 00000000 [ 1.404043] xhci_hcd 0000:04:00.0: @00000000000024e0 00000000 00000000 00000000 00000000 [ 1.404044] xhci_hcd 0000:04:00.0: @00000000000024f0 00000000 00000000 00000000 00000000 [ 1.404045] xhci_hcd 0000:04:00.0: @0000000000002500 00000000 00000000 00000000 00000000 [ 1.404047] xhci_hcd 0000:04:00.0: @0000000000002510 00000000 00000000 00000000 00000000 [ 1.404049] xhci_hcd 0000:04:00.0: @0000000000002520 00000000 00000000 00000000 00000000 [ 1.404051] xhci_hcd 0000:04:00.0: @0000000000002530 00000000 00000000 00000000 00000000 [ 1.404052] xhci_hcd 0000:04:00.0: @0000000000002540 00000000 00000000 00000000 00000000 [ 1.404053] xhci_hcd 0000:04:00.0: @0000000000002550 00000000 00000000 00000000 00000000 [ 1.404055] xhci_hcd 0000:04:00.0: @0000000000002560 00000000 00000000 00000000 00000000 [ 1.404056] xhci_hcd 0000:04:00.0: @0000000000002570 00000000 00000000 00000000 00000000 [ 1.404057] xhci_hcd 0000:04:00.0: @0000000000002580 00000000 00000000 00000000 00000000 [ 1.404059] xhci_hcd 0000:04:00.0: @0000000000002590 00000000 00000000 00000000 00000000 [ 1.404060] xhci_hcd 0000:04:00.0: @00000000000025a0 00000000 00000000 00000000 00000000 [ 1.404061] xhci_hcd 0000:04:00.0: @00000000000025b0 00000000 00000000 00000000 00000000 [ 1.404063] xhci_hcd 0000:04:00.0: @00000000000025c0 00000000 00000000 00000000 00000000 [ 1.404064] xhci_hcd 0000:04:00.0: @00000000000025d0 00000000 00000000 00000000 00000000 [ 1.404065] xhci_hcd 0000:04:00.0: @00000000000025e0 00000000 00000000 00000000 00000000 [ 1.404067] xhci_hcd 0000:04:00.0: @00000000000025f0 00000000 00000000 00000000 00000000 [ 1.404068] xhci_hcd 0000:04:00.0: @0000000000002600 00000000 00000000 00000000 00000000 [ 1.404069] xhci_hcd 0000:04:00.0: @0000000000002610 00000000 00000000 00000000 00000000 [ 1.404071] xhci_hcd 0000:04:00.0: @0000000000002620 00000000 00000000 00000000 00000000 [ 1.404072] xhci_hcd 0000:04:00.0: @0000000000002630 00000000 00000000 00000000 00000000 [ 1.404073] xhci_hcd 0000:04:00.0: @0000000000002640 00000000 00000000 00000000 00000000 [ 1.404075] xhci_hcd 0000:04:00.0: @0000000000002650 00000000 00000000 00000000 00000000 [ 1.404076] xhci_hcd 0000:04:00.0: @0000000000002660 00000000 00000000 00000000 00000000 [ 1.404077] xhci_hcd 0000:04:00.0: @0000000000002670 00000000 00000000 00000000 00000000 [ 1.404079] xhci_hcd 0000:04:00.0: @0000000000002680 00000000 00000000 00000000 00000000 [ 1.404080] xhci_hcd 0000:04:00.0: @0000000000002690 00000000 00000000 00000000 00000000 [ 1.404081] xhci_hcd 0000:04:00.0: @00000000000026a0 00000000 00000000 00000000 00000000 [ 1.404083] xhci_hcd 0000:04:00.0: @00000000000026b0 00000000 00000000 00000000 00000000 [ 1.404084] xhci_hcd 0000:04:00.0: @00000000000026c0 00000000 00000000 00000000 00000000 [ 1.404085] xhci_hcd 0000:04:00.0: @00000000000026d0 00000000 00000000 00000000 00000000 [ 1.404087] xhci_hcd 0000:04:00.0: @00000000000026e0 00000000 00000000 00000000 00000000 [ 1.404088] xhci_hcd 0000:04:00.0: @00000000000026f0 00000000 00000000 00000000 00000000 [ 1.404089] xhci_hcd 0000:04:00.0: @0000000000002700 00000000 00000000 00000000 00000000 [ 1.404091] xhci_hcd 0000:04:00.0: @0000000000002710 00000000 00000000 00000000 00000000 [ 1.404092] xhci_hcd 0000:04:00.0: @0000000000002720 00000000 00000000 00000000 00000000 [ 1.404093] xhci_hcd 0000:04:00.0: @0000000000002730 00000000 00000000 00000000 00000000 [ 1.404095] xhci_hcd 0000:04:00.0: @0000000000002740 00000000 00000000 00000000 00000000 [ 1.404096] xhci_hcd 0000:04:00.0: @0000000000002750 00000000 00000000 00000000 00000000 [ 1.404097] xhci_hcd 0000:04:00.0: @0000000000002760 00000000 00000000 00000000 00000000 [ 1.404099] xhci_hcd 0000:04:00.0: @0000000000002770 00000000 00000000 00000000 00000000 [ 1.404100] xhci_hcd 0000:04:00.0: @0000000000002780 00000000 00000000 00000000 00000000 [ 1.404101] xhci_hcd 0000:04:00.0: @0000000000002790 00000000 00000000 00000000 00000000 [ 1.404103] xhci_hcd 0000:04:00.0: @00000000000027a0 00000000 00000000 00000000 00000000 [ 1.404104] xhci_hcd 0000:04:00.0: @00000000000027b0 00000000 00000000 00000000 00000000 [ 1.404105] xhci_hcd 0000:04:00.0: @00000000000027c0 00000000 00000000 00000000 00000000 [ 1.404107] xhci_hcd 0000:04:00.0: @00000000000027d0 00000000 00000000 00000000 00000000 [ 1.404108] xhci_hcd 0000:04:00.0: @00000000000027e0 00000000 00000000 00000000 00000000 [ 1.404109] xhci_hcd 0000:04:00.0: @00000000000027f0 00000000 00000000 00000000 00000000 [ 1.404111] xhci_hcd 0000:04:00.0: Ring has not been updated [ 1.404114] xhci_hcd 0000:04:00.0: Ring deq = ffff88042b626400 (virt), 0x2400 (dma) [ 1.404115] xhci_hcd 0000:04:00.0: Ring deq updated 0 times [ 1.404116] xhci_hcd 0000:04:00.0: Ring enq = ffff88042b626400 (virt), 0x2400 (dma) [ 1.404117] xhci_hcd 0000:04:00.0: Ring enq updated 0 times [ 1.404120] xhci_hcd 0000:04:00.0: ERST deq = 64'h2400 [ 1.404121] xhci_hcd 0000:04:00.0: // Set the interrupt modulation register [ 1.404124] xhci_hcd 0000:04:00.0: // Enable interrupts, cmd = 0x4. [ 1.404126] xhci_hcd 0000:04:00.0: // Enabling event ring interrupter ffffc90011ce2020 by writing 0x2 to irq_pending [ 1.404128] xhci_hcd 0000:04:00.0: ffffc90011ce2020: ir_set[0] [ 1.404129] xhci_hcd 0000:04:00.0: ffffc90011ce2020: ir_set.pending = 0x2 [ 1.404131] xhci_hcd 0000:04:00.0: ffffc90011ce2024: ir_set.control = 0xa0 [ 1.404133] xhci_hcd 0000:04:00.0: ffffc90011ce2028: ir_set.erst_size = 0x1 [ 1.404137] xhci_hcd 0000:04:00.0: ffffc90011ce2030: ir_set.erst_base = @00004000 [ 1.404140] xhci_hcd 0000:04:00.0: ffffc90011ce2038: ir_set.erst_dequeue = @00002400 [ 1.404141] xhci_hcd 0000:04:00.0: Finished xhci_run for USB2 roothub [ 1.404154] usb usb10: default language 0x0409 [ 1.404161] usb usb10: udev 1, busnum 10, minor = 1152 [ 1.404163] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.404164] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.404166] usb usb10: Product: xHCI Host Controller [ 1.404167] usb usb10: Manufacturer: Linux 3.12.0-rc7 xhci_hcd [ 1.404168] usb usb10: SerialNumber: 0000:04:00.0 [ 1.404414] usb usb10: usb_probe_device [ 1.404415] usb usb10: configuration #1 chosen from 1 choice [ 1.404417] xHCI xhci_add_endpoint called for root hub [ 1.404419] xHCI xhci_check_bandwidth called for root hub [ 1.404424] usb usb10: adding 10-0:1.0 (config #1, interface 0) [ 1.404472] hub 10-0:1.0: usb_probe_interface [ 1.404474] hub 10-0:1.0: usb_probe_interface - got id [ 1.404475] hub 10-0:1.0: USB hub found [ 1.404481] hub 10-0:1.0: 2 ports detected [ 1.404482] hub 10-0:1.0: standalone hub [ 1.404483] hub 10-0:1.0: no power switching (usb 1.0) [ 1.404484] hub 10-0:1.0: individual port over-current protection [ 1.404485] hub 10-0:1.0: Single TT [ 1.404487] hub 10-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.404488] hub 10-0:1.0: power on to power good time: 20ms [ 1.404493] hub 10-0:1.0: local power source is good [ 1.404505] hub 10-0:1.0: trying to enable port power on non-switchable hub [ 1.404509] xhci_hcd 0000:04:00.0: set port power, actual port 0 status = 0x2a0 [ 1.404515] xhci_hcd 0000:04:00.0: set port power, actual port 1 status = 0x2a0 [ 1.404540] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.404607] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11 [ 1.404609] xhci_hcd 0000:04:00.0: supports USB remote wakeup [ 1.404611] xhci_hcd 0000:04:00.0: // Turn on HC, cmd = 0x5. [ 1.404613] xhci_hcd 0000:04:00.0: Finished xhci_run for USB3 roothub [ 1.404627] usb usb11: skipped 1 descriptor after endpoint [ 1.404631] usb usb11: default language 0x0409 [ 1.404638] usb usb11: udev 1, busnum 11, minor = 1280 [ 1.404639] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.404641] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.404642] usb usb11: Product: xHCI Host Controller [ 1.404643] usb usb11: Manufacturer: Linux 3.12.0-rc7 xhci_hcd [ 1.404644] usb usb11: SerialNumber: 0000:04:00.0 [ 1.404720] usb usb11: usb_probe_device [ 1.404722] usb usb11: configuration #1 chosen from 1 choice [ 1.404723] xHCI xhci_add_endpoint called for root hub [ 1.404724] xHCI xhci_check_bandwidth called for root hub [ 1.404728] usb usb11: adding 11-0:1.0 (config #1, interface 0) [ 1.404774] hub 11-0:1.0: usb_probe_interface [ 1.404775] hub 11-0:1.0: usb_probe_interface - got id [ 1.404777] hub 11-0:1.0: USB hub found [ 1.404782] hub 11-0:1.0: 2 ports detected [ 1.404783] hub 11-0:1.0: standalone hub [ 1.404784] hub 11-0:1.0: no power switching (usb 1.0) [ 1.404785] hub 11-0:1.0: individual port over-current protection [ 1.404786] hub 11-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.404787] hub 11-0:1.0: power on to power good time: 20ms [ 1.404792] hub 11-0:1.0: local power source is good [ 1.404803] hub 11-0:1.0: trying to enable port power on non-switchable hub [ 1.404808] xhci_hcd 0000:04:00.0: set port power, actual port 0 status = 0x2a0 [ 1.404814] xhci_hcd 0000:04:00.0: set port power, actual port 1 status = 0x2a0 [ 1.409656] usbcore: registered new interface driver usb-storage [ 1.409754] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.409755] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.409903] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.410053] mousedev: PS/2 mouse device common for all mice [ 1.410385] rtc_cmos 00:04: RTC can wake from S4 [ 1.410509] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.410527] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.411004] md: raid0 personality registered for level 0 [ 1.411005] md: raid1 personality registered for level 1 [ 1.411007] md: raid10 personality registered for level 10 [ 1.411042] md: raid6 personality registered for level 6 [ 1.411043] md: raid5 personality registered for level 5 [ 1.411043] md: raid4 personality registered for level 4 [ 1.411044] md: multipath personality registered for level -4 [ 1.411165] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 1.411221] device-mapper: raid: Loading target version 1.5.2 [ 1.411333] hidraw: raw HID events driver (C) Jiri Kosina [ 1.412118] usbcore: registered new interface driver usbhid [ 1.412119] usbhid: USB HID core driver [ 1.414345] ehci-pci 0000:00:13.2: port 3 full speed --> companion [ 1.414349] ehci-pci 0000:00:13.2: GetStatus port:3 status 003c01 0 ACK POWER OWNER sig=? CONNECT [ 1.414405] hub 2-0:1.0: port_wait_reset: err = -16 [ 1.414408] hub 2-0:1.0: port 3 not enabled, trying reset again... [ 1.430584] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.432644] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 1.436014] Too many HDMI devices [ 1.436015] Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 1.436016] Too many HDMI devices [ 1.436017] Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 1.436018] Too many HDMI devices [ 1.436018] Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 1.436019] Too many HDMI devices [ 1.436020] Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y [ 1.436313] hda_codec: cannot build controls for #0 (error -16) [ 1.436781] pktgen: Packet Generator for packet performance testing. Version: 2.74 [ 1.437083] Netfilter messages via NETLINK v0.30. [ 1.437085] nfnl_acct: registering with nfnetlink. [ 1.437094] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.437203] ctnetlink v0.93: registering with nfnetlink. [ 1.437210] ip_set: protocol 6 [ 1.437212] IPVS: Registered protocols () [ 1.437217] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 1.437240] IPVS: Creating netns size=1280 id=0 [ 1.437247] IPVS: ipvs loaded. [ 1.437271] ipip: IPv4 over IPv4 tunneling driver [ 1.437475] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.440818] tcp_probe: probe registered (port=0/fwmark=0) bufsize=4096 [ 1.440819] TCP: cubic registered [ 1.440820] Initializing XFRM netlink socket [ 1.441145] NET: Registered protocol family 10 [ 1.441279] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.441325] sit: IPv6 over IPv4 tunneling driver [ 1.441696] NET: Registered protocol family 17 [ 1.441711] Key type dns_resolver registered [ 1.442664] registered taskstats version 1 [ 1.442917] Magic number: 5:933:690 [ 1.442941] mem mem: hash matches [ 1.442954] console [netcon0] enabled [ 1.442955] netconsole: network logging started [ 1.443014] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.443460] PM: Hibernation image not present or could not be loaded. [ 1.443461] ALSA device list: [ 1.443462] #0: HDA ATI SB at 0xfdff4000 irq 16 [ 1.443463] #1: HD-Audio Generic at 0xfd5fc000 irq 45 [ 1.453388] ata4: SATA link down (SStatus 0 SControl 300) [ 1.455373] ata1: SATA link down (SStatus 0 SControl 300) [ 1.490323] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0 [ 1.490330] xhci_hcd 0000:02:00.0: Get port status returned 0x100 [ 1.490344] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0 [ 1.490348] xhci_hcd 0000:02:00.0: Get port status returned 0x2a0 [ 1.490362] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0 [ 1.490365] xhci_hcd 0000:02:00.0: Get port status returned 0x2a0 [ 1.490380] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0 [ 1.490383] xhci_hcd 0000:02:00.0: Get port status returned 0x100 [ 1.504318] xhci_hcd 0000:04:00.0: get port status, actual port 0 status = 0x2a0 [ 1.504325] xhci_hcd 0000:04:00.0: Get port status returned 0x100 [ 1.504345] xhci_hcd 0000:04:00.0: get port status, actual port 1 status = 0x2a0 [ 1.504348] xhci_hcd 0000:04:00.0: Get port status returned 0x100 [ 1.504364] xhci_hcd 0000:04:00.0: get port status, actual port 0 status = 0x2a0 [ 1.504367] xhci_hcd 0000:04:00.0: Get port status returned 0x2a0 [ 1.504379] xhci_hcd 0000:04:00.0: get port status, actual port 1 status = 0x2a0 [ 1.504382] xhci_hcd 0000:04:00.0: Get port status returned 0x2a0 [ 1.608253] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.608924] ata2.00: ATA-8: ST2000DM001-9YN164, CC4H, max UDMA/133 [ 1.608931] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.609636] ata2.00: configured for UDMA/133 [ 1.609943] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4H PQ: 0 ANSI: 5 [ 1.610405] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.610411] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.610551] sd 1:0:0:0: [sda] Write Protect is off [ 1.610556] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.610572] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.610617] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.615204] ehci-pci 0000:00:13.2: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.615399] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 1.615419] ehci-pci 0000:00:13.2: port 5 low speed --> companion [ 1.645450] sda: sda1 sda2 < sda5 > sda3 sda4 [ 1.646830] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.666192] ehci-pci 0000:00:13.2: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.666359] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0028 [ 1.666370] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS [ 1.666411] hub 5-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s [ 1.770140] hub 5-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 [ 1.791061] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00000311 [ 1.841982] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 1.842001] hub 5-0:1.0: port_wait_reset: err = -16 [ 1.842006] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 1.862970] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.862979] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 1.864929] ata3.00: ATAPI: HL-DT-STDVD-RAM GSA-H55L, 1.06, max UDMA/66 [ 1.867429] ata3.00: configured for UDMA/66 [ 1.871099] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55L 1.06 PQ: 0 ANSI: 5 [ 1.874541] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.874546] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.875004] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.875216] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.875432] md: Waiting for all devices to be available before autodetect [ 1.875436] md: If you don't use raid, use raid=noautodetect [ 1.875764] md: Autodetecting RAID arrays. [ 1.875767] md: Scanned 0 and added 0 devices. [ 1.875769] md: autorun ... [ 1.875770] md: ... autorun DONE. [ 1.894394] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240) [ 1.902698] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities [ 1.904841] EXT4-fs (sda3): INFO: recovery required on readonly filesystem [ 1.904846] EXT4-fs (sda3): write access will be enabled during recovery [ 1.912858] tsc: Refined TSC clocksource calibration: 4026.925 MHz [ 2.063716] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 2.063804] hub 5-0:1.0: port_wait_reset: err = -16 [ 2.063811] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 2.084727] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 2.178384] EXT4-fs (sda3): orphan cleanup on readonly fs [ 2.178552] EXT4-fs (sda3): 3 orphan inodes deleted [ 2.178556] EXT4-fs (sda3): recovery complete [ 2.249977] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.249999] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 2.270127] devtmpfs: mounted [ 2.271884] Freeing unused kernel memory: 1008K (ffffffff81edc000 - ffffffff81fd8000) [ 2.271887] Write protecting the kernel read-only data: 14336k [ 2.272326] Freeing unused kernel memory: 12K (ffff8800019fd000 - ffff880001a00000) [ 2.272455] Freeing unused kernel memory: 12K (ffff880001dfd000 - ffff880001e00000) [ 2.285480] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 2.285499] hub 5-0:1.0: port_wait_reset: err = -16 [ 2.285503] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 2.306476] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 2.507188] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 2.507207] hub 5-0:1.0: port_wait_reset: err = -16 [ 2.507212] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 2.528182] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 2.728977] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 2.728996] hub 5-0:1.0: port_wait_reset: err = -16 [ 2.729000] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 2.729004] hub 5-0:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 2.749854] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 2.770206] setfont (1189) used greatest stack depth: 5040 bytes left [ 2.800331] init-early.sh (1188) used greatest stack depth: 4312 bytes left [ 2.800788] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 2.800793] hub 5-0:1.0: port_wait_reset: err = -16 [ 2.800794] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 2.821838] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 2.911834] Switched to clocksource tsc [ 3.022579] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 3.022663] hub 5-0:1.0: port_wait_reset: err = -16 [ 3.022670] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 3.043577] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 3.244268] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 3.244303] hub 5-0:1.0: port_wait_reset: err = -16 [ 3.244310] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 3.265389] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 3.466009] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 3.466091] hub 5-0:1.0: port_wait_reset: err = -16 [ 3.466098] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 3.487068] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 3.687823] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 3.687852] hub 5-0:1.0: port_wait_reset: err = -16 [ 3.687855] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 3.687857] hub 5-0:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 3.708841] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 3.759802] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 3.759821] hub 5-0:1.0: port_wait_reset: err = -16 [ 3.759826] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 3.780798] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 3.792704] systemd-udevd[1353]: starting version 208 [ 3.981424] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 3.981468] hub 5-0:1.0: port_wait_reset: err = -16 [ 3.981476] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 4.003445] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 4.204186] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 4.204211] hub 5-0:1.0: port_wait_reset: err = -16 [ 4.204218] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 4.225175] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 4.276211] firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 4.425972] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 4.425986] hub 5-0:1.0: port_wait_reset: err = -16 [ 4.425990] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 4.446959] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 4.647736] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 4.647754] hub 5-0:1.0: port_wait_reset: err = -16 [ 4.647758] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 4.647761] hub 5-0:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 4.668793] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 4.719596] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 4.719615] hub 5-0:1.0: port_wait_reset: err = -16 [ 4.719620] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 4.740712] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 4.776778] firewire_core 0000:05:0e.0: created device fw0: GUID 0049e55067670a00, S400 [ 4.941407] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 4.941426] hub 5-0:1.0: port_wait_reset: err = -16 [ 4.941430] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 4.962416] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 5.163158] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 5.163177] hub 5-0:1.0: port_wait_reset: err = -16 [ 5.163181] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 5.184148] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 5.384957] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 5.384975] hub 5-0:1.0: port_wait_reset: err = -16 [ 5.384980] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 5.405953] ohci-pci 0000:00:13.0: port[2] reset timeout, stat 00020311 [ 5.606705] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 5.606724] hub 5-0:1.0: port_wait_reset: err = -16 [ 5.606728] hub 5-0:1.0: port 3 not enabled, trying reset again... [ 5.606732] hub 5-0:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 5.606746] hub 5-0:1.0: unable to enumerate USB device on port 3 [ 5.606759] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [4] = 0x00010301 CSC LSDA PPS CCS [ 5.606772] hub 5-0:1.0: port 5, status 0301, change 0001, 1.5 Mb/s [ 5.710597] hub 5-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x301 [ 5.731583] ohci-pci 0000:00:13.0: port[4] reset timeout, stat 00000311 [ 5.782491] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [4] = 0x00100303 PRSC LSDA PPS PES CCS [ 5.833457] usb 5-5: new low-speed USB device number 6 using ohci-pci [ 5.855441] ohci-pci 0000:00:13.0: port[4] reset timeout, stat 00000313 [ 5.906365] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [4] = 0x00100303 PRSC LSDA PPS PES CCS [ 5.977335] usb 5-5: skipped 1 descriptor after interface [ 5.979331] usb 5-5: default language 0x0409 [ 5.984328] usb 5-5: udev 6, busnum 5, minor = 517 [ 5.984335] usb 5-5: New USB device found, idVendor=145f, idProduct=011a [ 5.984340] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.984344] usb 5-5: Product: GM-4200 Gamer Optical Mouse [ 5.984347] usb 5-5: Manufacturer: Trust [ 5.984539] usb 5-5: usb_probe_device [ 5.984544] usb 5-5: configuration #1 chosen from 1 choice [ 5.986336] usb 5-5: adding 5-5:1.0 (config #1, interface 0) [ 5.986402] usbhid 5-5:1.0: usb_probe_interface [ 5.986407] usbhid 5-5:1.0: usb_probe_interface - got id [ 5.991846] input: Trust GM-4200 Gamer Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/input/input3 [ 5.992086] hid-generic 0003:145F:011A.0001: input,hidraw0: USB HID v1.11 Mouse [Trust GM-4200 Gamer Optical Mouse] on usb-0000:00:13.0-5/input0 [ 5.992172] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0028 [ 5.992187] ehci-pci 0000:00:13.2: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 5.992208] hub 2-0:1.0: port 3, status 0100, change 0001, 12 Mb/s [ 6.096160] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100 [ 6.096172] ehci-pci 0000:00:13.2: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 6.096189] hub 2-0:1.0: port 5, status 0100, change 0001, 12 Mb/s [ 6.119885] rc (1187) used greatest stack depth: 4232 bytes left [ 6.199968] hub 2-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100 [ 6.199981] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.199989] hub 2-0:1.0: hub_suspend [ 6.200003] usb usb2: bus auto-suspend, wakeup 1 [ 6.200007] ehci-pci 0000:00:13.2: suspend root hub [ 6.200851] hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 6.200858] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.200863] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.200869] hub 10-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.200874] hub 11-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.200879] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0008 [ 6.200907] ohci-pci 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00120301 PRSC PESC LSDA PPS CCS [ 6.200919] hub 6-0:1.0: hub_suspend [ 6.200950] usb usb6: bus auto-suspend, wakeup 1 [ 6.200956] ohci-pci 0000:00:14.5: suspend root hub [ 6.200970] hub 7-0:1.0: hub_suspend [ 6.200983] usb usb7: bus auto-suspend, wakeup 1 [ 6.200988] ohci-pci 0000:00:16.0: suspend root hub [ 6.201009] xhci_hcd 0000:02:00.0: set port remote wake mask, actual port 0 status = 0xe0002a0 [ 6.201024] xhci_hcd 0000:02:00.0: set port remote wake mask, actual port 1 status = 0xe0002a0 [ 6.201041] hub 8-0:1.0: hub_suspend [ 6.201052] usb usb8: bus auto-suspend, wakeup 1 [ 6.201061] xhci_hcd 0000:02:00.0: xhci_hub_status_data: stopping port polling. [ 6.201067] hub 9-0:1.0: hub_suspend [ 6.201075] hub 10-0:1.0: hub_suspend [ 6.201086] usb usb10: bus auto-suspend, wakeup 1 [ 6.201094] xhci_hcd 0000:04:00.0: xhci_hub_status_data: stopping port polling. [ 6.201100] usb usb9: bus auto-suspend, wakeup 1 [ 6.201108] xhci_hcd 0000:02:00.0: xhci_hub_status_data: stopping port polling. [ 6.201118] xhci_hcd 0000:04:00.0: set port remote wake mask, actual port 0 status = 0xe0002a0 [ 6.201132] xhci_hcd 0000:04:00.0: set port remote wake mask, actual port 1 status = 0xe0002a0 [ 6.201141] hub 11-0:1.0: hub_suspend [ 6.201150] usb usb11: bus auto-suspend, wakeup 1 [ 6.201158] xhci_hcd 0000:04:00.0: xhci_hub_status_data: stopping port polling. [ 6.201165] hub 5-0:1.0: port 3 enable change, status 00000301 [ 6.201178] hub 5-0:1.0: reset change on port 3 [ 6.712833] EXT4-fs (sda3): re-mounted. Opts: (null) [ 7.359435] EXT4-fs (sda4): recovery complete [ 7.389441] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)