[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.12.0-wl+ (finger@larrylap.lan) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #9 SMP PREEMPT Sat Nov 9 18:49:47 CST 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-wl+ root=UUID=569e7933-a06e-4ec9-88a8-2581adca98ad resume=/dev/disk/by-id/ata-ST9250315AS_5VC2GXQZ-part3 splash=silent quiet showopts crashkernel=128M [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bbf4ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbf50000-0x00000000bbf64fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbf65000-0x00000000bbf65fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf66000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv2700 Notebook PC/30D6, BIOS F.27 11/27/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xbbf50 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-protect [ 0.000000] E0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f8090-0x000f809f] mapped at [ffff8800000f8090] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02654000, 0x02654fff] PGTABLE [ 0.000000] BRK [0x02655000, 0x02655fff] PGTABLE [ 0.000000] BRK [0x02656000, 0x02656fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbbc00000-0xbbdfffff] [ 0.000000] [mem 0xbbc00000-0xbbdfffff] page 2M [ 0.000000] BRK [0x02657000, 0x02657fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xb8000000-0xbbbfffff] [ 0.000000] [mem 0xb8000000-0xbbbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x80000000-0xb7ffffff] [ 0.000000] [mem 0x80000000-0xb7ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0xbbe00000-0xbbf4ffff] [ 0.000000] [mem 0xbbe00000-0xbbf4ffff] page 4k [ 0.000000] BRK [0x02658000, 0x02658fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31c78000-0x34e33fff] [ 0.000000] Reserving 128MB of memory at 656MB for crashkernel (System RAM: 3006MB) [ 0.000000] ACPI: RSDP 00000000000f80c0 00024 (v03 HPQOEM) [ 0.000000] ACPI: XSDT 00000000bbf5d343 0006C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bbf64874 000F4 (v03 HPQOEM SLIC-MPC 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 00000000bbf5d3af 074C5 (v01 HPQOEM SLIC-MPC 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bbf65fc0 00040 [ 0.000000] ACPI: SLIC 00000000bbf649dc 00176 (v01 HPQOEM SLIC-MPC 06040000 HPQ 00000001) [ 0.000000] ACPI: WDAT 00000000bbf64b52 00104 (v01 PTLTD WDATTBL 06040000 LTP 00000001) [ 0.000000] ACPI: SRAT 00000000bbf64c56 000A0 (v01 AMD HAMMER 06040000 AMD 00000001) [ 0.000000] ACPI: MCFG 00000000bbf64cf6 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 00000000bbf64d32 00038 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 00000000bbf64d6a 00068 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bbf64dd2 00028 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bbf64dfa 00206 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbbf4ffff] -> [mem 0x00000000-0xbbf4ffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbbf4ffff] [ 0.000000] NODE_DATA [mem 0xbbf4c000-0xbbf4ffff] [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800b8400000-ffff8800bb3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xbbf4ffff] [ 0.000000] On node 0 totalpages: 769773 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11966 pages used for memmap [ 0.000000] DMA32 zone: 765776 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000fffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bba00000 s82432 r8192 d24064 u1048576 [ 0.000000] pcpu-alloc: s82432 r8192 d24064 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 757722 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-wl+ root=UUID=569e7933-a06e-4ec9-88a8-2581adca98ad resume=/dev/disk/by-id/ata-ST9250315AS_5VC2GXQZ-part3 splash=silent quiet showopts crashkernel=128M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ f002000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2824376K/3079092K available (4495K kernel code, 570K rwdata, 2072K rodata, 920K init, 11104K bss, 254716K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:8448 nr_irqs:512 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2000.305 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.61 BogoMIPS (lpj=8001220) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004826] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011281] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013160] Mount-cache hash table entries: 256 [ 0.015592] tseg: 00bbf80000 [ 0.015596] CPU: Physical Processor ID: 0 [ 0.015599] CPU: Processor Core ID: 0 [ 0.015601] mce: CPU supports 5 MCE banks [ 0.015615] LVT offset 0 assigned for vector 0xf9 [ 0.015622] process: using AMD E400 aware idle routine [ 0.015626] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 tlb_flushall_shift: 4 [ 0.015810] Freeing SMP alternatives memory: 16K (ffffffff81b76000 - ffffffff81b7a000) [ 0.015817] ACPI: Core revision 20130725 [ 0.078728] ACPI: All ACPI Tables successfully acquired [ 0.081429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.122518] smpboot: CPU0: AMD Turion(tm) 64 X2 TL-60 (fam: 0f, model: 68, stepping: 02) [ 0.124000] Performance Events: AMD PMU driver. [ 0.124000] ... version: 0 [ 0.124000] ... bit width: 48 [ 0.124000] ... generic registers: 4 [ 0.124000] ... value mask: 0000ffffffffffff [ 0.124000] ... max period: 00007fffffffffff [ 0.124000] ... fixed-purpose events: 0 [ 0.124000] ... event mask: 000000000000000f [ 0.124000] process: System has AMD C1E enabled [ 0.124000] process: Switch to broadcast mode on CPU0 [ 0.144527] SMP alternatives: lockdep: fixing up alternatives [ 0.144558] smpboot: Booting Node 0, Processors # 1 OK [ 0.008000] process: Switch to broadcast mode on CPU1 [ 0.236323] Brought up 2 CPUs [ 0.236329] smpboot: Total of 2 processors activated (8001.08 BogoMIPS) [ 0.236893] devtmpfs: initialized [ 0.240000] PM: Registering ACPI NVS region [mem 0xbbf65000-0xbbf65fff] (4096 bytes) [ 0.240367] NET: Registered protocol family 16 [ 0.248000] cpuidle: using governor ladder [ 0.248000] cpuidle: using governor menu [ 0.248000] node 0 link 0: io port [1000, fffff] [ 0.248000] TOM: 00000000c0000000 aka 3072M [ 0.248000] node 0 link 0: mmio [a0000, bffff] [ 0.248000] node 0 link 0: mmio [c0000000, dfffffff] [ 0.248000] node 0 link 0: mmio [e0000000, efffffff] [ 0.248000] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.248000] bus: [bus 00-ff] on node 0 link 0 [ 0.248000] bus: 00 [io 0x0000-0xffff] [ 0.248000] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.248000] bus: 00 [mem 0xc0000000-0xfcffffffff] [ 0.248000] ACPI: bus type PCI registered [ 0.248447] PCI: Using configuration type 1 for base access [ 0.248447] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.248447] mtrr: probably your BIOS does not setup all CPUs. [ 0.248447] mtrr: corrected configuration. [ 0.284365] bio: create slab at 0 [ 0.284502] ACPI: Added _OSI(Module Device) [ 0.284502] ACPI: Added _OSI(Processor Device) [ 0.284502] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.284502] ACPI: Added _OSI(Processor Aggregator Device) [ 0.291802] ACPI: EC: Look up EC in DSDT [ 0.336419] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.356370] ACPI: Interpreter enabled [ 0.356400] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.356422] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.356555] ACPI: (supports S0 S3 S4 S5) [ 0.356558] ACPI: Using IOAPIC for interrupt routing [ 0.356813] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.553096] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.560000] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.560000] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf3ff]) [ 0.560000] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d0fff]) [ 0.564030] PCI host bridge to bus 0000:00 [ 0.564030] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.564030] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.564030] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] [ 0.564030] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] [ 0.564030] pci 0000:00:00.0: [10de:0547] type 00 class 0x050000 [ 0.564447] pci 0000:00:01.0: [10de:0548] type 00 class 0x060100 [ 0.568915] pci 0000:00:01.1: [10de:0542] type 00 class 0x0c0500 [ 0.568915] pci 0000:00:01.1: reg 0x10: [io 0x3080-0x30bf] [ 0.568915] pci 0000:00:01.1: reg 0x20: [io 0x3040-0x307f] [ 0.568915] pci 0000:00:01.1: reg 0x24: [io 0x3000-0x303f] [ 0.568915] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.570033] pci 0000:00:01.2: [10de:0541] type 00 class 0x050000 [ 0.573053] pci 0000:00:01.3: [10de:0543] type 00 class 0x0b4000 [ 0.573053] pci 0000:00:01.3: reg 0x10: [mem 0xfc200000-0xfc27ffff] [ 0.573973] pci 0000:00:02.0: [10de:055e] type 00 class 0x0c0310 [ 0.573973] pci 0000:00:02.0: reg 0x10: [mem 0xfc486000-0xfc486fff] [ 0.573973] pci 0000:00:02.0: supports D1 D2 [ 0.573973] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.577297] pci 0000:00:02.1: [10de:055f] type 00 class 0x0c0320 [ 0.577297] pci 0000:00:02.1: reg 0x10: [mem 0xfc489000-0xfc4890ff] [ 0.577297] pci 0000:00:02.1: supports D1 D2 [ 0.577297] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.577971] pci 0000:00:04.0: [10de:055e] type 00 class 0x0c0310 [ 0.577971] pci 0000:00:04.0: reg 0x10: [mem 0xfc487000-0xfc487fff] [ 0.577971] pci 0000:00:04.0: supports D1 D2 [ 0.577971] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.581590] pci 0000:00:04.1: [10de:055f] type 00 class 0x0c0320 [ 0.581590] pci 0000:00:04.1: reg 0x10: [mem 0xfc489400-0xfc4894ff] [ 0.581590] pci 0000:00:04.1: supports D1 D2 [ 0.581590] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.581955] pci 0000:00:06.0: [10de:0560] type 00 class 0x01018a [ 0.581955] pci 0000:00:06.0: reg 0x20: [io 0x30c0-0x30cf] [ 0.585715] pci 0000:00:07.0: [10de:055c] type 00 class 0x040300 [ 0.585715] pci 0000:00:07.0: reg 0x10: [mem 0xfc480000-0xfc483fff] [ 0.585715] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.588355] pci 0000:00:08.0: [10de:0561] type 01 class 0x060401 [ 0.589882] pci 0000:00:08.0: System wakeup disabled by ACPI [ 0.590513] pci 0000:00:09.0: [10de:0550] type 00 class 0x010185 [ 0.590513] pci 0000:00:09.0: reg 0x10: [io 0x30f0-0x30f7] [ 0.590513] pci 0000:00:09.0: reg 0x14: [io 0x30e4-0x30e7] [ 0.590513] pci 0000:00:09.0: reg 0x18: [io 0x30e8-0x30ef] [ 0.590513] pci 0000:00:09.0: reg 0x1c: [io 0x30e0-0x30e3] [ 0.590513] pci 0000:00:09.0: reg 0x20: [io 0x30d0-0x30df] [ 0.590513] pci 0000:00:09.0: reg 0x24: [mem 0xfc484000-0xfc485fff] [ 0.592626] pci 0000:00:0a.0: [10de:054c] type 00 class 0x020000 [ 0.592626] pci 0000:00:0a.0: reg 0x10: [mem 0xfc488000-0xfc488fff] [ 0.592626] pci 0000:00:0a.0: reg 0x14: [io 0x30f8-0x30ff] [ 0.592626] pci 0000:00:0a.0: reg 0x18: [mem 0xfc489c00-0xfc489cff] [ 0.592626] pci 0000:00:0a.0: reg 0x1c: [mem 0xfc489800-0xfc48980f] [ 0.592626] pci 0000:00:0a.0: supports D1 D2 [ 0.592626] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.596097] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.596617] pci 0000:00:0c.0: [10de:0563] type 01 class 0x060400 [ 0.596617] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.598025] pci 0000:00:0d.0: [10de:0563] type 01 class 0x060400 [ 0.598025] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.600785] pci 0000:00:12.0: [10de:0531] type 00 class 0x030000 [ 0.600785] pci 0000:00:12.0: reg 0x10: [mem 0xf4000000-0xf4ffffff] [ 0.600785] pci 0000:00:12.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.600785] pci 0000:00:12.0: reg 0x1c: [mem 0xf0000000-0xf0ffffff 64bit] [ 0.600785] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.601871] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.605044] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.605712] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.608823] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.609731] pci 0000:01:09.0: [1180:0832] type 00 class 0x0c0010 [ 0.609731] pci 0000:01:09.0: reg 0x10: [mem 0x00000000-0x000007ff] [ 0.609731] pci 0000:01:09.0: supports D1 D2 [ 0.609731] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.612099] pci 0000:01:09.1: [1180:0822] type 00 class 0x080500 [ 0.612099] pci 0000:01:09.1: reg 0x10: [mem 0xfc100800-0xfc1008ff] [ 0.612175] pci 0000:01:09.1: supports D1 D2 [ 0.612179] pci 0000:01:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.612742] pci 0000:01:09.2: [1180:0592] type 00 class 0x088000 [ 0.612742] pci 0000:01:09.2: reg 0x10: [mem 0xfc100c00-0xfc100cff] [ 0.612742] pci 0000:01:09.2: supports D1 D2 [ 0.612742] pci 0000:01:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.612751] pci 0000:01:09.3: [1180:0852] type 00 class 0x088000 [ 0.612751] pci 0000:01:09.3: reg 0x10: [mem 0xfc101000-0xfc1010ff] [ 0.612751] pci 0000:01:09.3: supports D1 D2 [ 0.612751] pci 0000:01:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.612751] pci 0000:00:08.0: PCI bridge to [bus 01-06] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0xfc100000-0xfc1fffff] [ 0.612751] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode) [ 0.612751] pci 0000:00:08.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.612751] pci 0000:0e:00.0: [10ec:8174] type 00 class 0x028000 [ 0.616017] pci 0000:0e:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.616030] pci 0000:0e:00.0: reg 0x14: [mem 0xf8000000-0xf8003fff] [ 0.616144] pci 0000:0e:00.0: supports D1 D2 [ 0.616147] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.624038] pci 0000:00:0c.0: PCI bridge to [bus 0e-13] [ 0.624046] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff] [ 0.624051] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.624434] pci 0000:08:00.0: [14e4:4315] type 00 class 0x028000 [ 0.624434] pci 0000:08:00.0: reg 0x10: [mem 0xfc000000-0xfc003fff 64bit] [ 0.624434] pci 0000:08:00.0: supports D1 D2 [ 0.632028] pci 0000:00:0d.0: PCI bridge to [bus 08-0d] [ 0.632038] pci 0000:00:0d.0: bridge window [mem 0xfc000000-0xfc0fffff] [ 0.640000] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.642457] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15) [ 0.645297] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15) [ 0.652015] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.652015] ACPI: PCI Interrupt Link [LK1E] (IRQs 19 20 21 22 23) *0, disabled. [ 0.653954] ACPI: PCI Interrupt Link [LK2E] (IRQs 19 20 21 22 23) *0, disabled. [ 0.660001] ACPI: PCI Interrupt Link [LK3E] (IRQs 19 20 21 22 23) *0, disabled. [ 0.660001] ACPI: PCI Interrupt Link [LK4E] (IRQs 19 20 21 22 23) *10 [ 0.662468] ACPI: PCI Interrupt Link [LSMB] (IRQs 18) *10 [ 0.668001] ACPI: PCI Interrupt Link [LUS0] (IRQs 17) *11 [ 0.668336] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7 [ 0.671108] ACPI: PCI Interrupt Link [LMAC] (IRQs 19 20 21 22 23) *11 [ 0.676001] ACPI: PCI Interrupt Link [LAZA] (IRQs 19 20 21 22 23) *10 [ 0.676965] ACPI: PCI Interrupt Link [LGPU] (IRQs 19 20 21 22 23) *10 [ 0.679760] ACPI: PCI Interrupt Link [LPID] (IRQs 19 20 21 22 23) *0, disabled. [ 0.684001] ACPI: PCI Interrupt Link [LSI0] (IRQs 19 20 21 22 23) *5 [ 0.685618] ACPI: PCI Interrupt Link [Z012] (IRQs 16) *10 [ 0.692001] ACPI: PCI Interrupt Link [Z013] (IRQs 16) *11 [ 0.692001] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11 [ 0.696181] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.696232] ACPI: \_SB_.PCI0: notify handler is installed [ 0.696415] Found 1 acpi root devices [ 0.697122] ACPI: EC: GPE = 0x2a, I/O: command/status = 0x66, data = 0x62 [ 0.697269] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none [ 0.697269] vgaarb: loaded [ 0.697269] vgaarb: bridge control possible 0000:00:12.0 [ 0.700751] SCSI subsystem initialized [ 0.700751] libata version 3.00 loaded. [ 0.700751] ACPI: bus type USB registered [ 0.700751] usbcore: registered new interface driver usbfs [ 0.700751] usbcore: registered new interface driver hub [ 0.700751] usbcore: registered new device driver usb [ 0.704237] PCI: Using ACPI for IRQ routing [ 0.704237] PCI: pci_cache_line_size set to 64 bytes [ 0.704237] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.704237] e820: reserve RAM buffer [mem 0xbbf50000-0xbbffffff] [ 0.708213] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.708276] Switched to clocksource hpet [ 0.740960] pnp: PnP ACPI init [ 0.741097] ACPI: bus type PNP registered [ 0.743989] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved [ 0.744051] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.744077] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.744099] system 00:00: [mem 0xfec80000-0xfec80fff] has been reserved [ 0.744122] system 00:00: [mem 0xfef00000-0xfef00fff] has been reserved [ 0.744174] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.746843] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.747684] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 0.747693] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.753580] system 00:03: [io 0x0360-0x0361] has been reserved [ 0.753613] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.753624] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.753863] pnp 00:04: [dma 4] [ 0.754335] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.754930] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.755849] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.756516] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.757224] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.757944] pnp 00:09: Plug and Play ACPI device, IDs AUI1500 SYN0300 SYN0002 PNP0f13 (active) [ 0.763019] system 00:0a: [io 0x1000-0x107f] could not be reserved [ 0.763044] system 00:0a: [io 0x1080-0x10ff] has been reserved [ 0.763066] system 00:0a: [io 0x1400-0x147f] has been reserved [ 0.763089] system 00:0a: [io 0x1480-0x14ff] has been reserved [ 0.763116] system 00:0a: [io 0x1800-0x187f] has been reserved [ 0.763137] system 00:0a: [io 0x1880-0x18ff] has been reserved [ 0.763148] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.767552] pnp: PnP ACPI: found 11 devices [ 0.767557] ACPI: bus type PNP unregistered [ 0.811977] pci 0000:00:12.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref] [ 0.811997] pci 0000:01:09.0: BAR 0: assigned [mem 0xfc100000-0xfc1007ff] [ 0.812024] pci 0000:00:08.0: PCI bridge to [bus 01-06] [ 0.812033] pci 0000:00:08.0: bridge window [mem 0xfc100000-0xfc1fffff] [ 0.812042] pci 0000:00:0c.0: PCI bridge to [bus 0e-13] [ 0.812047] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff] [ 0.812053] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.812061] pci 0000:00:0d.0: PCI bridge to [bus 08-0d] [ 0.812067] pci 0000:00:0d.0: bridge window [mem 0xfc000000-0xfc0fffff] [ 0.812076] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.812080] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.812083] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.812087] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.812090] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.812094] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.812097] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff] [ 0.812101] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff] [ 0.812104] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff] [ 0.812108] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff] [ 0.812111] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff] [ 0.812115] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff] [ 0.812119] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff] [ 0.812122] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff] [ 0.812126] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xfebfffff] [ 0.812130] pci_bus 0000:01: resource 1 [mem 0xfc100000-0xfc1fffff] [ 0.812133] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.812136] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.812140] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.812144] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.812147] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.812151] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.812154] pci_bus 0000:01: resource 10 [mem 0x000d4000-0x000d7fff] [ 0.812158] pci_bus 0000:01: resource 11 [mem 0x000d8000-0x000dbfff] [ 0.812161] pci_bus 0000:01: resource 12 [mem 0x000dc000-0x000dffff] [ 0.812165] pci_bus 0000:01: resource 13 [mem 0x000e0000-0x000e3fff] [ 0.812168] pci_bus 0000:01: resource 14 [mem 0x000e4000-0x000e7fff] [ 0.812172] pci_bus 0000:01: resource 15 [mem 0x000e8000-0x000ebfff] [ 0.812175] pci_bus 0000:01: resource 16 [mem 0x000ec000-0x000effff] [ 0.812179] pci_bus 0000:01: resource 17 [mem 0x000f0000-0x000fffff] [ 0.812182] pci_bus 0000:01: resource 18 [mem 0xc0000000-0xfebfffff] [ 0.812186] pci_bus 0000:0e: resource 0 [io 0x4000-0x4fff] [ 0.812190] pci_bus 0000:0e: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.812194] pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc0fffff] [ 0.812463] NET: Registered protocol family 2 [ 0.813526] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.814174] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes) [ 0.817097] TCP: Hash tables configured (established 32768 bind 32768) [ 0.817349] TCP: reno registered [ 0.817432] UDP hash table entries: 2048 (order: 6, 327680 bytes) [ 0.817895] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes) [ 0.819017] NET: Registered protocol family 1 [ 0.824541] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17 [ 0.885657] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17 [ 0.891394] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 16 [ 0.949690] ACPI: PCI Interrupt Link [Z013] enabled at IRQ 16 [ 0.950327] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.950407] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.950497] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.950596] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.950707] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.950827] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.950840] pci 0000:00:12.0: Boot video device [ 0.950883] PCI: CLS 64 bytes, default 64 [ 0.951416] Unpacking initramfs... [ 2.273439] Freeing initrd memory: 50928K (ffff880031c78000 - ffff880034e34000) [ 2.582101] DMA-API: preallocated 65536 debug entries [ 2.582108] DMA-API: debugging enabled by kernel config [ 2.585858] Simple Boot Flag at 0x36 set to 0x1 [ 2.591688] audit: initializing netlink socket (disabled) [ 2.591796] type=2000 audit(1384045000.588:1): initialized [ 2.633350] msgmni has been set to 5615 [ 2.635293] io scheduler noop registered [ 2.635298] io scheduler deadline registered [ 2.636646] io scheduler cfq registered (default) [ 2.641446] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 2.641450] vesafb: scrolling: redraw [ 2.641454] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.641860] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000980000, using 3072k, total 3072k [ 2.661161] Console: switching to colour frame buffer device 128x48 [ 2.678028] fb0: VESA VGA frame buffer device [ 2.682731] ACPI: AC Adapter [ADP1] (on-line) [ 2.684800] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 2.687255] ACPI: Lid Switch [LID0] [ 2.688053] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 2.688130] ACPI: Sleep Button [SLPB] [ 2.688877] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 2.688894] ACPI: Power Button [PWRB] [ 2.689673] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.689690] ACPI: Power Button [PWRF] [ 2.690351] ACPI: processor limited to max C-state 1 [ 2.729576] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.729583] ACPI: Thermal Zone [TZS0] (63 C) [ 2.748336] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.748344] ACPI: Thermal Zone [TZS1] (66 C) [ 2.821768] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.825809] ACPI: Battery Slot [BAT0] (battery present) [ 2.830641] Non-volatile memory driver v1.3 [ 2.830648] Linux agpgart interface v0.103 [ 2.831665] ahci 0000:00:09.0: version 3.0 [ 2.838156] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 2.838467] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ [ 2.838470] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP [ 2.838663] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 2.838669] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio [ 2.838675] ahci 0000:00:09.0: setting latency timer to 64 [ 2.849781] scsi0 : ahci [ 2.851464] scsi1 : ahci [ 2.852931] scsi2 : ahci [ 2.854215] scsi3 : ahci [ 2.855384] ata1: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484100 irq 23 [ 2.855388] ata2: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484180 irq 23 [ 2.855392] ata3: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484200 irq 23 [ 2.855394] ata4: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484280 irq 23 [ 2.857034] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 2.857507] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.857513] ehci-pci: EHCI PCI platform driver [ 2.858343] ehci-pci 0000:00:02.1: setting latency timer to 64 [ 2.858440] ehci-pci 0000:00:02.1: EHCI Host Controller [ 2.858651] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 2.858712] ehci-pci 0000:00:02.1: debug port 1 [ 2.858926] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 2.859150] ehci-pci 0000:00:02.1: irq 17, io mem 0xfc489000 [ 2.868178] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 2.871626] hub 1-0:1.0: USB hub found [ 2.871846] hub 1-0:1.0: 5 ports detected [ 2.875950] ehci-pci 0000:00:04.1: setting latency timer to 64 [ 2.875977] ehci-pci 0000:00:04.1: EHCI Host Controller [ 2.876156] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 2.876190] ehci-pci 0000:00:04.1: debug port 1 [ 2.876319] ehci-pci 0000:00:04.1: cache line size of 64 is not supported [ 2.876506] ehci-pci 0000:00:04.1: irq 16, io mem 0xfc489400 [ 2.888152] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 2.890686] hub 2-0:1.0: USB hub found [ 2.890814] hub 2-0:1.0: 5 ports detected [ 2.893836] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.893841] ohci-pci: OHCI PCI platform driver [ 2.894692] ohci-pci 0000:00:02.0: setting latency timer to 64 [ 2.894713] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 2.894778] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 2.894884] ohci-pci 0000:00:02.0: irq 17, io mem 0xfc486000 [ 2.952494] hub 3-0:1.0: USB hub found [ 2.952618] hub 3-0:1.0: 5 ports detected [ 2.956119] ohci-pci 0000:00:04.0: setting latency timer to 64 [ 2.956126] ohci-pci 0000:00:04.0: OHCI PCI host controller [ 2.956182] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 2.956284] ohci-pci 0000:00:04.0: irq 16, io mem 0xfc487000 [ 3.016435] hub 4-0:1.0: USB hub found [ 3.016561] hub 4-0:1.0: 5 ports detected [ 3.019535] uhci_hcd: USB Universal Host Controller Interface driver [ 3.020971] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.032396] i8042: Detected active multiplexing controller, rev 1.1 [ 3.039680] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.040338] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.040370] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.040393] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.040413] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.043085] mousedev: PS/2 mouse device common for all mice [ 3.047495] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 3.048633] rtc_cmos 00:06: RTC can wake from S4 [ 3.049865] rtc rtc0: rtc_cmos: dev (254:0) [ 3.049910] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 3.050011] rtc_cmos 00:06: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 3.051223] Key type dns_resolver registered [ 3.055306] registered taskstats version 1 [ 3.055556] kmemleak: Kernel memory leak detector initialized [ 3.055563] kmemleak: Automatic memory scanning thread started [ 3.058929] rtc_cmos 00:06: setting system clock to 2013-11-10 00:56:41 UTC (1384045001) [ 3.073793] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.180048] ata2: SATA link down (SStatus 0 SControl 300) [ 3.180113] ata4: SATA link down (SStatus 0 SControl 300) [ 3.180183] ata3: SATA link down (SStatus 0 SControl 300) [ 3.180227] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.188118] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.225571] ata1.00: ATA-8: ST9250315AS, 0003DEM1, max UDMA/133 [ 3.225575] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.227390] ata1.00: configured for UDMA/133 [ 3.228873] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0003 PQ: 0 ANSI: 5 [ 3.232106] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.232863] sd 0:0:0:0: [sda] Write Protect is off [ 3.232871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.233197] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.276519] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.284075] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.455675] Freeing unused kernel memory: 920K (ffffffff81a90000 - ffffffff81b76000) [ 3.455682] Write protecting the kernel read-only data: 10240k [ 3.462656] Freeing unused kernel memory: 1636K (ffff880001467000 - ffff880001600000) [ 3.468095] usb 1-4: new high-speed USB device number 3 using ehci-pci [ 3.470666] Freeing unused kernel memory: 2024K (ffff880001806000 - ffff880001a00000) [ 3.627661] pata_amd 0000:00:06.0: version 0.4.1 [ 3.627871] pata_amd 0000:00:06.0: setting latency timer to 64 [ 3.642093] scsi4 : pata_amd [ 3.643373] scsi5 : pata_amd [ 3.645178] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 3.645183] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 3.682467] emc: device handler registered [ 3.691688] rdac: device handler registered [ 3.699531] hp_sw: device handler registered [ 3.707343] alua: device handler registered [ 3.728041] systemd-udevd[831]: starting version 208 [ 3.800699] ata5.00: ATAPI: Optiarc DVD RW AD-7561A, GH09, max MWDMA2 [ 3.800714] ata5: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc700) ACPI=0x39f (120:600:0x12) [ 3.816350] ata5.00: configured for MWDMA2 [ 3.818404] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7561A GH09 PQ: 0 ANSI: 5 [ 3.828611] ata6: port disabled--ignoring [ 3.877126] acpi device:1c: registered as cooling_device2 [ 3.877981] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.882150] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 3.957624] wmi: Mapper loaded [ 4.093919] [drm] Initialized drm 1.1.0 20060810 [ 4.264192] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 4.264199] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver [ 4.264489] Console: switching to colour dummy device 80x25 [ 4.270907] nouveau 0000:00:12.0: setting latency timer to 64 [ 4.282373] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 22 [ 4.289052] [drm] hdmi device not found 0 18 1 [ 4.289312] nouveau [ DEVICE][0000:00:12.0] BOOT0 : 0x067000a1 [ 4.289316] nouveau [ DEVICE][0000:00:12.0] Chipset: C67 (NV67) [ 4.289320] nouveau [ DEVICE][0000:00:12.0] Family : NV40 [ 4.291177] nouveau [ VBIOS][0000:00:12.0] checking PRAMIN for image... [ 4.355860] nouveau [ VBIOS][0000:00:12.0] ... appears to be valid [ 4.355868] nouveau [ VBIOS][0000:00:12.0] using image from PRAMIN [ 4.356203] nouveau [ VBIOS][0000:00:12.0] BIT signature found [ 4.356208] nouveau [ VBIOS][0000:00:12.0] version 05.67.32.16.06 [ 4.375143] nouveau [ PFB][0000:00:12.0] RAM type: unknown [ 4.375150] nouveau [ PFB][0000:00:12.0] RAM size: 64 MiB [ 4.375153] nouveau [ PFB][0000:00:12.0] ZCOMP: 0 tags [ 4.405261] nouveau [ PTHERM][0000:00:12.0] FAN control: none / external [ 4.405278] nouveau [ PTHERM][0000:00:12.0] fan management: disabled [ 4.405403] nouveau [ PTHERM][0000:00:12.0] internal sensor: yes [ 4.426744] [TTM] Zone kernel: Available graphics memory: 1439950 kiB [ 4.426750] [TTM] Initializing pool allocator [ 4.426916] [TTM] Initializing DMA pool allocator [ 4.427316] nouveau [ DRM] VRAM: 61 MiB [ 4.427319] nouveau [ DRM] GART: 512 MiB [ 4.427326] nouveau [ DRM] TMDS table version 1.1 [ 4.427329] nouveau W[ DRM] TMDS table script pointers not stubbed [ 4.427332] nouveau [ DRM] DCB version 3.0 [ 4.427337] nouveau [ DRM] DCB outp 00: 03015323 00000004 [ 4.427341] nouveau [ DRM] DCB outp 01: 01400310 00000023 [ 4.427345] nouveau [ DRM] DCB outp 02: 024223f1 0040c080 [ 4.427348] nouveau [ DRM] DCB conn 00: 0000 [ 4.427353] nouveau [ DRM] DCB conn 01: 1161 [ 4.427357] nouveau [ DRM] DCB conn 02: 0210 [ 4.427361] nouveau [ DRM] DCB conn 03: 0211 [ 4.427365] nouveau [ DRM] DCB conn 04: 0213 [ 4.427369] nouveau [ DRM] DCB conn 05: 0340 [ 4.441406] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.441414] [drm] No driver support for vblank timestamp query. [ 4.441422] nouveau [ DRM] ACPI backlight interface available, not registering our own [ 4.442022] nouveau [ DRM] 3 available performance level(s) [ 4.442029] nouveau [ DRM] 0: core 100MHz shader 100MHz voltage 1100mV fanspeed 100% [ 4.442033] nouveau [ DRM] 1: core 250MHz shader 250MHz voltage 1200mV fanspeed 100% [ 4.442038] nouveau [ DRM] 2: core 425MHz shader 425MHz voltage 1200mV fanspeed 100% [ 4.442041] nouveau [ DRM] c: core 39MHz [ 4.450158] nouveau [ DRM] MM: using M2MF for buffer copies [ 4.450260] nouveau [ DRM] Calling LVDS script 6: [ 4.450264] nouveau [ DRM] 0xD680: Parsing digital output script table [ 4.450274] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2) [ 4.548056] nouveau [ DRM] Load detected on output B [ 4.549646] nouveau [ DRM] allocated 1280x800 fb: 0x9000, bo ffff8800327f7400 [ 4.551303] fbcon: nouveaufb (fb0) is primary device [ 4.552842] ====================================================== [ 4.552842] [ INFO: possible circular locking dependency detected ] [ 4.552848] 3.12.0-wl+ #9 Not tainted [ 4.552848] ------------------------------------------------------- [ 4.552851] udevd/857 is trying to acquire lock: [ 4.552890] (&(&dev->vblank_time_lock)->rlock){-.....}, at: [] drm_handle_vblank+0x5a/0x410 [drm] [ 4.552890] but task is already holding lock: [ 4.552952] (&(&event->lock)->rlock){-.....}, at: [] nouveau_event_trigger+0x35/0xb0 [nouveau] [ 4.552952] which lock already depends on the new lock. [ 4.552953] the existing dependency chain (in reverse order) is: [ 4.552956] -> #1 (&(&event->lock)->rlock){-.....}: [ 4.552961] [] lock_acquire+0x9c/0x1f0 [ 4.552966] [] _raw_spin_lock_irqsave+0x41/0x60 [ 4.552991] [] nouveau_event_get+0x1b/0x90 [nouveau] [ 4.553030] [] nouveau_drm_vblank_enable+0x7b/0xe0 [nouveau] [ 4.553041] [] drm_vblank_get+0xe0/0x2c0 [drm] [ 4.553052] [] drm_vblank_pre_modeset.part.2+0x3b/0x50 [drm] [ 4.553062] [] drm_vblank_pre_modeset+0x15/0x20 [drm] [ 4.553098] [] nv_crtc_prepare+0x6e/0x1f0 [nouveau] [ 4.553105] [] drm_crtc_helper_set_mode+0x327/0x4e0 [drm_kms_helper] [ 4.553109] [] drm_crtc_helper_set_config+0x9f3/0xb50 [drm_kms_helper] [ 4.553145] [] nouveau_crtc_set_config+0x47/0x130 [nouveau] [ 4.553159] [] drm_mode_set_config_internal+0x63/0xf0 [drm] [ 4.553163] [] drm_fb_helper_set_par+0x69/0xf0 [drm_kms_helper] [ 4.553167] [] fbcon_init+0x504/0x590 [ 4.553171] [] visual_init+0xb7/0x120 [ 4.553174] [] do_bind_con_driver+0x153/0x370 [ 4.553176] [] do_take_over_console+0x114/0x1c0 [ 4.553178] [] do_fbcon_takeover+0x5b/0xc0 [ 4.553181] [] fbcon_event_notify+0x6fd/0x850 [ 4.553185] [] notifier_call_chain+0x55/0x110 [ 4.553187] [] __blocking_notifier_call_chain+0x5c/0xb0 [ 4.553190] [] blocking_notifier_call_chain+0x11/0x20 [ 4.553193] [] fb_notifier_call_chain+0x16/0x20 [ 4.553196] [] register_framebuffer+0x1e3/0x310 [ 4.553200] [] drm_fb_helper_initial_config+0x327/0x500 [drm_kms_helper] [ 4.553236] [] nouveau_fbcon_init+0xf2/0x130 [nouveau] [ 4.553271] [] nouveau_drm_load+0x4a2/0x740 [nouveau] [ 4.553284] [] drm_get_pci_dev+0x126/0x2f0 [drm] [ 4.553319] [] nouveau_drm_probe+0x1e4/0x280 [nouveau] [ 4.553323] [] local_pci_probe+0x39/0x70 [ 4.553327] [] work_for_cpu_fn+0xf/0x20 [ 4.553330] [] process_one_work+0x1d1/0x670 [ 4.553332] [] worker_thread+0x258/0x3a0 [ 4.553335] [] kthread+0xd6/0xe0 [ 4.553338] [] ret_from_fork+0x7c/0xb0 [ 4.553340] -> #0 (&(&dev->vblank_time_lock)->rlock){-.....}: [ 4.553343] [] __lock_acquire+0x1a3a/0x1e60 [ 4.553345] [] lock_acquire+0x9c/0x1f0 [ 4.553348] [] _raw_spin_lock_irqsave+0x41/0x60 [ 4.553359] [] drm_handle_vblank+0x5a/0x410 [drm] [ 4.553394] [] nouveau_drm_vblank_handler+0x22/0x30 [nouveau] [ 4.553419] [] nouveau_event_trigger+0x78/0xb0 [nouveau] [ 4.553450] [] nv04_disp_intr+0x89/0xb0 [nouveau] [ 4.553479] [] nouveau_mc_intr+0xb6/0x170 [nouveau] [ 4.553483] [] handle_irq_event_percpu+0x57/0x380 [ 4.553485] [] handle_irq_event+0x38/0x60 [ 4.553488] [] handle_fasteoi_irq+0x55/0x100 [ 4.553492] [] handle_irq+0x66/0x190 [ 4.553495] [] do_IRQ+0x48/0xc0 [ 4.553498] [] ret_from_intr+0x0/0x13 [ 4.553499] other info that might help us debug this: [ 4.553500] Possible unsafe locking scenario: [ 4.553500] CPU0 CPU1 [ 4.553501] ---- ---- [ 4.553503] lock(&(&event->lock)->rlock); [ 4.553504] lock(&(&dev->vblank_time_lock)->rlock); [ 4.553506] lock(&(&event->lock)->rlock); [ 4.553507] lock(&(&dev->vblank_time_lock)->rlock); [ 4.553508] *** DEADLOCK *** [ 4.553509] 1 lock held by udevd/857: [ 4.553536] #0: (&(&event->lock)->rlock){-.....}, at: [] nouveau_event_trigger+0x35/0xb0 [nouveau] [ 4.553537] stack backtrace: [ 4.553539] CPU: 1 PID: 857 Comm: udevd Not tainted 3.12.0-wl+ #9 [ 4.553541] Hardware name: Hewlett-Packard HP Pavilion dv2700 Notebook PC/30D6, BIOS F.27 11/27/2008 [ 4.553544] ffffffff821c0aa0 ffff8800bbb03b98 ffffffff8145852b ffffffff821c0aa0 [ 4.553547] ffff8800bbb03bd8 ffffffff81455627 ffff8800bbb03c30 ffff8800b7a30650 [ 4.553549] 0000000000000000 ffff8800b7a30628 ffff8800b7a30650 ffff8800b7a30000 [ 4.553550] Call Trace: [ 4.553554] [] dump_stack+0x4e/0x82 [ 4.553557] [] print_circular_bug+0x2b0/0x2bf [ 4.553559] [] __lock_acquire+0x1a3a/0x1e60 [ 4.553562] [] ? mark_lock+0x47b/0x650 [ 4.553564] [] lock_acquire+0x9c/0x1f0 [ 4.553575] [] ? drm_handle_vblank+0x5a/0x410 [drm] [ 4.553579] [] _raw_spin_lock_irqsave+0x41/0x60 [ 4.553588] [] ? drm_handle_vblank+0x5a/0x410 [drm] [ 4.553599] [] drm_handle_vblank+0x5a/0x410 [drm] [ 4.553624] [] ? nouveau_event_trigger+0x35/0xb0 [nouveau] [ 4.553660] [] nouveau_drm_vblank_handler+0x22/0x30 [nouveau] [ 4.553685] [] nouveau_event_trigger+0x78/0xb0 [nouveau] [ 4.553716] [] nv04_disp_intr+0x89/0xb0 [nouveau] [ 4.553745] [] nouveau_mc_intr+0xb6/0x170 [nouveau] [ 4.553748] [] handle_irq_event_percpu+0x57/0x380 [ 4.553750] [] handle_irq_event+0x38/0x60 [ 4.553753] [] handle_fasteoi_irq+0x55/0x100 [ 4.553756] [] handle_irq+0x66/0x190 [ 4.553760] [] ? trace_hardirqs_off+0xd/0x10 [ 4.553764] [] ? rcu_irq_enter+0x60/0xb0 [ 4.553767] [] do_IRQ+0x48/0xc0 [ 4.553770] [] common_interrupt+0x6f/0x6f [ 4.553773] [] ? retint_swapgs+0xe/0x13 [ 4.573046] nouveau [ DRM] Calling LVDS script 2: [ 4.573050] nouveau [ DRM] 0xD6D8: Parsing digital output script table [ 4.620574] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input13 [ 4.649424] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [ 4.704032] nouveau [ DRM] Calling LVDS script 5: [ 4.704035] nouveau [ DRM] 0xD676: Parsing digital output script table [ 4.724406] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2) [ 4.724415] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B [ 4.724433] Console: switching to colour frame buffer device 90x36 [ 4.756540] nouveau 0000:00:12.0: fb0: nouveaufb frame buffer device [ 4.756879] nouveau 0000:00:12.0: registered panic notifier [ 4.757235] [drm] Initialized nouveau 1.1.1 20120801 for 0000:00:12.0 on minor 0 [ 5.168042] nouveau [ DRM] Load detected on output B [ 5.958134] nouveau [ DRM] Calling LVDS script 6: [ 5.958143] nouveau [ DRM] 0xD680: Parsing digital output script table [ 5.978397] nouveau [ DRM] Calling LVDS script 2: [ 5.978402] nouveau [ DRM] 0xD6D8: Parsing digital output script table [ 5.998663] xor: measuring software checksum speed [ 6.036570] prefetch64-sse: 5752.000 MB/sec [ 6.076040] generic_sse: 5803.000 MB/sec [ 6.076043] xor: using function: generic_sse (5803.000 MB/sec) [ 6.110354] nouveau [ DRM] Calling LVDS script 5: [ 6.110363] nouveau [ DRM] 0xD676: Parsing digital output script table [ 6.113988] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2) [ 6.134312] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2) [ 6.134321] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B [ 6.148035] raid6: sse2x1 2604 MB/s [ 6.216030] raid6: sse2x2 3511 MB/s [ 6.284016] raid6: sse2x4 3587 MB/s [ 6.284019] raid6: using algorithm sse2x4 (3587 MB/s) [ 6.284021] raid6: using intx1 recovery algorithm [ 6.331162] bio: create slab at 1 [ 6.337579] Btrfs loaded [ 6.535056] video LNXVIDEO:00: Restoring backlight state [ 6.695827] PM: Starting manual resume from disk [ 6.906312] EXT4-fs (sda2): acl option not supported [ 6.936669] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 7.414449] EXT4-fs (sda2): acl option not supported [ 7.414470] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr [ 9.336732] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 9.498098] systemd[1]: Inserted module 'autofs4' [ 9.735090] NET: Registered protocol family 10 [ 9.737107] systemd[1]: Inserted module 'ipv6' [ 9.756516] systemd[1]: Set hostname to . [ 10.337980] LVM: Activation generator successfully completed. [ 11.868699] systemd[1]: Starting Replay Read-Ahead Data... [ 11.871827] systemd[1]: Starting Collect Read-Ahead Data... [ 11.874691] systemd[1]: Starting Syslog Socket. [ 11.875095] systemd[1]: Listening on Syslog Socket. [ 11.875181] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 11.875407] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 11.875435] systemd[1]: Starting Delayed Shutdown Socket. [ 11.875716] systemd[1]: Listening on Delayed Shutdown Socket. [ 11.875862] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 11.876674] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 11.876734] systemd[1]: Starting Journal Socket. [ 11.877139] systemd[1]: Listening on Journal Socket. [ 11.877442] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 11.880152] systemd[1]: Starting Create dynamic rule for /dev/root link... [ 11.883047] systemd[1]: Mounting POSIX Message Queue File System... [ 11.885967] systemd[1]: Starting LSB: Set default boot entry if called... [ 11.888649] systemd[1]: Starting Journal Service... [ 11.893191] systemd[1]: Started Journal Service. [ 12.001897] systemd-readahead[1632]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 12.002338] systemd-readahead[1633]: Failed to create fanotify object: Function not implemented [ 12.715927] systemd-journald[1638]: Vacuuming done, freed 0 bytes [ 13.711585] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.712505] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 13.968088] systemd-udevd[1885]: starting version 208 [ 14.621205] EXT4-fs (sda2): acl option not supported [ 14.621227] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr [ 15.032329] i2c i2c-4: nForce2 SMBus adapter at 0x3040 [ 15.032826] i2c i2c-5: nForce2 SMBus adapter at 0x3000 [ 15.492205] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 15.492216] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 15.494392] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 15.549206] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 15.641373] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 15.646744] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 15.646825] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 15.662838] pci 0000:00:08.0: setting latency timer to 64 [ 15.667468] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10 [ 15.668844] r592: driver successfully loaded [ 15.668852] memstick_host memstick0: memstick_check started [ 15.772110] memstick_host memstick0: memstick_check finished [ 16.173460] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:72:4c:a5:52 [ 16.173469] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 16.417374] Linux video capture interface: v2.00 [ 17.316344] pcieport 0000:00:0d.0: driver skip pci_set_master, fix it! [ 17.321147] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 20 [ 17.340095] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00 [ 17.340104] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243) [ 17.340114] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243) [ 17.340123] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243) [ 17.340132] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243) [ 17.360056] ssb: chipcommon status is 0x10 [ 17.360065] ssb: Found rev 1 PMU (capabilities 0x02A62F01) [ 17.360073] ssb: GPIO driver not activated [ 17.360075] ssb: SPROM offset is 0x1000 [ 17.368789] ssb: SPROM revision 8 detected [ 17.404550] ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0 [ 17.477007] sdhci: Secure Digital Host Controller Interface driver [ 17.477015] sdhci: Copyright(c) Pierre Ossman [ 17.496141] sdhci-pci 0000:01:09.1: SDHCI controller found [1180:0822] (rev 22) [ 17.496567] sdhci-pci 0000:01:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 17.496579] sdhci-pci 0000:01:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 17.499360] mmc0: SDHCI controller on PCI [0000:01:09.1] using DMA [ 17.626153] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b016) [ 17.631200] input: HP Webcam as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/input/input16 [ 17.632889] usbcore: registered new interface driver uvcvideo [ 17.632894] USB Video Class driver (1.1.1) [ 18.109025] cfg80211: Calling CRDA to update world regulatory domain [ 18.109777] cfg80211: Pending regulatory request, waiting for it to be processed... [ 19.449181] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 19 [ 19.449287] hda_intel: Disabling MSI [ 19.449544] snd_hda_intel 0000:00:07.0: setting latency timer to 64 [ 20.177780] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k [ 20.210393] hda_codec: CX20561 (Hermosa): BIOS auto-probing. [ 20.412375] cfg80211: World regulatory domain updated: [ 20.412384] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.412388] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.412391] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.412394] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.412397] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.412400] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.412458] cfg80211: Calling CRDA for country: US [ 20.420700] cfg80211: Regulatory domain changed to country: US [ 20.420708] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.420712] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 20.420715] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 20.420718] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.420721] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.420723] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.420726] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 20.420729] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 21.420071] r8188eu: module is from the staging directory, the quality is unknown, you have been warned. [ 21.428446] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0) [ 21.470276] usbcore: registered new interface driver r8188eu [ 21.500394] systemd-udevd[2319]: renamed network interface wlan0 to wlan2 [ 21.649272] kvm: Nested Virtualization enabled [ 23.317749] pcieport 0000:00:0c.0: driver skip pci_set_master, fix it! [ 23.322973] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 23 [ 23.335482] cfg80211: Updating information on frequency 2412 MHz with regulatory rule: [ 23.335486] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335489] cfg80211: Updating information on frequency 2417 MHz with regulatory rule: [ 23.335492] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335494] cfg80211: Updating information on frequency 2422 MHz with regulatory rule: [ 23.335497] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335500] cfg80211: Updating information on frequency 2427 MHz with regulatory rule: [ 23.335502] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335505] cfg80211: Updating information on frequency 2432 MHz with regulatory rule: [ 23.335508] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335510] cfg80211: Updating information on frequency 2437 MHz with regulatory rule: [ 23.335513] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335515] cfg80211: Updating information on frequency 2442 MHz with regulatory rule: [ 23.335518] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335521] cfg80211: Updating information on frequency 2447 MHz with regulatory rule: [ 23.335523] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335526] cfg80211: Updating information on frequency 2452 MHz with regulatory rule: [ 23.335528] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335531] cfg80211: Updating information on frequency 2457 MHz with regulatory rule: [ 23.335534] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335536] cfg80211: Updating information on frequency 2462 MHz with regulatory rule: [ 23.335539] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335541] cfg80211: Updating information on frequency 2467 MHz with regulatory rule: [ 23.335544] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335546] cfg80211: Updating information on frequency 2472 MHz with regulatory rule: [ 23.335549] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 23.335552] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits it [ 23.338940] rtl8192se: FW Power Save off (module option) [ 23.339167] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE Loading firmware rtlwifi/rtl8192sefw.bin [ 23.458193] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 23.670709] cfg80211: Updating information on frequency 2412 MHz with regulatory rule: [ 23.670718] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670721] cfg80211: Updating information on frequency 2417 MHz with regulatory rule: [ 23.670724] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670726] cfg80211: Updating information on frequency 2422 MHz with regulatory rule: [ 23.670729] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670731] cfg80211: Updating information on frequency 2427 MHz with regulatory rule: [ 23.670734] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670736] cfg80211: Updating information on frequency 2432 MHz with regulatory rule: [ 23.670738] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670741] cfg80211: Updating information on frequency 2437 MHz with regulatory rule: [ 23.670743] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670746] cfg80211: Updating information on frequency 2442 MHz with regulatory rule: [ 23.670748] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670750] cfg80211: Updating information on frequency 2447 MHz with regulatory rule: [ 23.670753] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670755] cfg80211: Updating information on frequency 2452 MHz with regulatory rule: [ 23.670758] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670760] cfg80211: Updating information on frequency 2457 MHz with regulatory rule: [ 23.670763] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670765] cfg80211: Updating information on frequency 2462 MHz with regulatory rule: [ 23.670767] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 23.670770] cfg80211: Disabling freq 2467 MHz [ 23.670772] cfg80211: Disabling freq 2472 MHz [ 23.670774] cfg80211: Disabling freq 2484 MHz [ 23.671992] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 23.964390] systemd-udevd[2319]: renamed network interface wlan0 to wlp14s0 [ 24.083748] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 26.893364] vboxdrv: Found 2 processor cores. [ 26.894534] vboxdrv: fAsync=1 offMin=0x184f38 offMax=0x184f38 [ 26.895425] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 26.895428] vboxdrv: Successfully loaded version 4.3.2 (interface 0x001a0005). [ 27.717380] vboxpci: pci-stub module not available, cannot detach PCI devices [ 27.717386] vboxpci: IOMMU not found (not compiled) [ 28.644686] MAC Address = a0:f3:c1:15:41:cf [ 28.653449] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 28.673685] R8188EU: ERROR indicate disassoc [ 28.679214] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 28.693508] RPC: Registered named UNIX socket transport module. [ 28.693515] RPC: Registered udp transport module. [ 28.693518] RPC: Registered tcp transport module. [ 28.693520] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 28.695190] R8188EU: ERROR indicate disassoc [ 28.697383] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 28.731878] forcedeth 0000:00:0a.0: irq 40 for MSI/MSI-X [ 28.732951] forcedeth 0000:00:0a.0 eth0: MSI enabled [ 28.733231] forcedeth 0000:00:0a.0 eth0: no link during initialization [ 28.733797] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.904860] IPv6: ADDRCONF(NETDEV_UP): wlp14s0: link is not ready [ 29.226196] NET: Registered protocol family 17 [ 29.659612] Bluetooth: Core ver 2.17 [ 29.659923] NET: Registered protocol family 31 [ 29.659927] Bluetooth: HCI device and connection manager initialized [ 29.659960] Bluetooth: HCI socket layer initialized [ 29.659982] Bluetooth: L2CAP socket layer initialized [ 29.660099] Bluetooth: SCO socket layer initialized [ 29.714335] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 29.714341] Bluetooth: BNEP filters: protocol multicast [ 29.714375] Bluetooth: BNEP socket layer initialized [ 30.303281] systemd-journald[1638]: Received request to flush runtime journal from PID 1 [ 70.069950] nouveau [ DRM] Calling LVDS script 6: [ 70.069956] nouveau [ DRM] 0xD680: Parsing digital output script table [ 70.090395] nouveau [ DRM] Calling LVDS script 2: [ 70.090399] nouveau [ DRM] 0xD6D8: Parsing digital output script table [ 70.221411] nouveau [ DRM] Calling LVDS script 5: [ 70.221413] nouveau [ DRM] 0xD676: Parsing digital output script table [ 70.221524] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 2) [ 70.241821] nouveau [ DRM] Setting dpms mode 0 on TV encoder (output 2) [ 70.241828] nouveau [ DRM] Output TV-1 is running on CRTC 1 using output B [ 221.829463] systemd-journald[1638]: Failed to read ACL on /var/log/journal/ed58edc2575c5ff40b5d658600000aab/user-1000.journal, ignoring: Operation not supported