[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.0_nightlytop_06653b_20131110_+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2485 SMP Sun Nov 10 10:20:15 CST 2013 [ 0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2013_11_10/nightlytop/06653b713abd59935eb1fd049cc1fc072784b61e/bzImage_x86_64 root=/dev/sda1 drm.debug=0xe modules_path=kernels//nightly_parents/2013_11_10/nightlytop/06653b713abd59935eb1fd049cc1fc072784b61e/modules_x86_64/lib/modules/3.12.0_nightlytop_06653b_20131110_+ kexec_jump_back_entry=0x00000040 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007a4b5fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a4b6000-0x000000007a4bcfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007a4bd000-0x000000007a907fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a908000-0x000000007ad56fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ad57000-0x000000008c658fff] usable [ 0.000000] BIOS-e820: [mem 0x000000008c659000-0x000000008c860fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008c861000-0x000000008c876fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000008c877000-0x000000008cdb8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008cdb9000-0x000000008dffefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008dfff000-0x000000008dffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000008f000000-0x000000009f1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: ASUS All Series/Z87-EXPERT, BIOS 1008 05/17/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FC0000000 write-back [ 0.000000] 2 base 0240000000 mask 7FE0000000 write-back [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 5 base 0090000000 mask 7FF0000000 uncachable [ 0.000000] 6 base 008F000000 mask 7FFF000000 uncachable [ 0.000000] 7 base 025FE00000 mask 7FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: update [mem 0x8f000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x8e000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [ffff8800000fd800] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x058be000, 0x058befff] PGTABLE [ 0.000000] BRK [0x058bf000, 0x058bffff] PGTABLE [ 0.000000] BRK [0x058c0000, 0x058c0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25fc00000-0x25fdfffff] [ 0.000000] [mem 0x25fc00000-0x25fdfffff] page 2M [ 0.000000] BRK [0x058c1000, 0x058c1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25fbfffff] [ 0.000000] [mem 0x25c000000-0x25fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff] [ 0.000000] [mem 0x200000000-0x23fffffff] page 1G [ 0.000000] [mem 0x240000000-0x25bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7a4b5fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7a3fffff] page 2M [ 0.000000] [mem 0x7a400000-0x7a4b5fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x7a4bd000-0x7a907fff] [ 0.000000] [mem 0x7a4bd000-0x7a5fffff] page 4k [ 0.000000] [mem 0x7a600000-0x7a7fffff] page 2M [ 0.000000] [mem 0x7a800000-0x7a907fff] page 4k [ 0.000000] BRK [0x058c2000, 0x058c2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7ad57000-0x8c658fff] [ 0.000000] [mem 0x7ad57000-0x7adfffff] page 4k [ 0.000000] [mem 0x7ae00000-0x8c5fffff] page 2M [ 0.000000] [mem 0x8c600000-0x8c658fff] page 4k [ 0.000000] BRK [0x058c3000, 0x058c3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x8dfff000-0x8dffffff] [ 0.000000] [mem 0x8dfff000-0x8dffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 000000008c865080 00074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 000000008c871aa8 0010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 000000008c865188 0C920 (v02 ALASKA A M I 00000024 INTL 20091112) [ 0.000000] ACPI: FACS 000000008cdb7080 00040 [ 0.000000] ACPI: APIC 000000008c871bb8 00092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 000000008c871c50 00044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 000000008c871c98 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 000000008c8721d8 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: MCFG 000000008c872cb0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 000000008c872cf0 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 000000008c872d28 0036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 000000008c873098 0329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: BGRT 000000008c876390 00038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25fdfffff] [ 0.000000] NODE_DATA [mem 0x25fdf7000-0x25fdfafff] [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257800000-ffff88025f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x25fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x7a4b5fff] [ 0.000000] node 0: [mem 0x7a4bd000-0x7a907fff] [ 0.000000] node 0: [mem 0x7ad57000-0x8c658fff] [ 0.000000] node 0: [mem 0x8dfff000-0x8dffffff] [ 0.000000] node 0: [mem 0x100000000-0x25fdfffff] [ 0.000000] On node 0 totalpages: 2015136 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8905 pages used for memmap [ 0.000000] DMA32 zone: 569860 pages, LIFO batch:31 [ 0.000000] Normal zone: 22520 pages used for memmap [ 0.000000] Normal zone: 1441280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a4b6000-0x7a4bcfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a908000-0x7ad56fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8c659000-0x8c860fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8c861000-0x8c876fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8c877000-0x8cdb8fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8cdb9000-0x8dffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x8e000000-0x8effffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8f000000-0x9f1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9f200000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x9f200000-0xefffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88025fa00000 s74304 r8192 d24000 u262144 [ 0.000000] pcpu-alloc: s74304 r8192 d24000 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1983626 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2013_11_10/nightlytop/06653b713abd59935eb1fd049cc1fc072784b61e/bzImage_x86_64 root=/dev/sda1 drm.debug=0xe modules_path=kernels//nightly_parents/2013_11_10/nightlytop/06653b713abd59935eb1fd049cc1fc072784b61e/modules_x86_64/lib/modules/3.12.0_nightlytop_06653b_20131110_+ kexec_jump_back_entry=0x00000040 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7791896K/8060544K available (7241K kernel code, 699K rwdata, 3524K rodata, 62384K init, 584K bss, 268648K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.001000] tsc: Fast TSC calibration using PIT [ 0.002000] tsc: Detected 3497.968 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6995.93 BogoMIPS (lpj=3497968) [ 0.000174] pid_max: default: 32768 minimum: 301 [ 0.000270] Security Framework initialized [ 0.000634] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.001738] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002222] Mount-cache hash table entries: 256 [ 0.002418] CPU: Physical Processor ID: 0 [ 0.002502] CPU: Processor Core ID: 0 [ 0.003316] mce: CPU supports 9 MCE banks [ 0.003407] CPU0: Thermal LVT vector (0xfa) already installed [ 0.003412] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0 tlb_flushall_shift: 6 [ 0.003687] Freeing SMP alternatives memory: 32K (ffffffff85822000 - ffffffff8582a000) [ 0.003832] ACPI: Core revision 20130725 [ 0.008033] ACPI: All ACPI Tables successfully acquired [ 0.008581] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.018678] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (fam: 06, model: 3c, stepping: 03) [ 0.018911] TSC deadline timer enabled [ 0.018915] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.019207] ... version: 3 [ 0.019291] ... bit width: 48 [ 0.019376] ... generic registers: 4 [ 0.019460] ... value mask: 0000ffffffffffff [ 0.019546] ... max period: 0000ffffffffffff [ 0.019632] ... fixed-purpose events: 3 [ 0.019716] ... event mask: 000000070000000f [ 0.031833] CPU1: Thermal LVT vector (0xfa) already installed [ 0.045845] CPU2: Thermal LVT vector (0xfa) already installed [ 0.059847] CPU3: Thermal LVT vector (0xfa) already installed [ 0.073816] CPU4: Thermal LVT vector (0xfa) already installed [ 0.087865] CPU5: Thermal LVT vector (0xfa) already installed [ 0.101879] CPU6: Thermal LVT vector (0xfa) already installed [ 0.019896] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK [ 0.115931] CPU7: Thermal LVT vector (0xfa) already installed [ 0.117976] Brought up 8 CPUs [ 0.118061] smpboot: Total of 8 processors activated (55967.48 BogoMIPS) [ 0.123738] devtmpfs: initialized [ 0.123993] PM: Registering ACPI NVS region [mem 0x7a4b6000-0x7a4bcfff] (28672 bytes) [ 0.124133] PM: Registering ACPI NVS region [mem 0x8c877000-0x8cdb8fff] (5513216 bytes) [ 0.124376] xor: automatically using best checksumming function: [ 0.133634] avx : 35492.000 MB/sec [ 0.133736] RTC time: 20:02:20, date: 11/11/13 [ 0.133842] NET: Registered protocol family 16 [ 0.135537] cpuidle: using governor ladder [ 0.135622] cpuidle: using governor menu [ 0.135760] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.135898] ACPI: bus type PCI registered [ 0.136038] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.136179] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.139783] PCI: Using configuration type 1 for base access [ 0.144534] bio: create slab at 0 [ 0.161396] raid6: sse2x1 11250 MB/s [ 0.178419] raid6: sse2x2 13972 MB/s [ 0.195444] raid6: sse2x4 16523 MB/s [ 0.212468] raid6: avx2x1 22093 MB/s [ 0.229494] raid6: avx2x2 24882 MB/s [ 0.246519] raid6: avx2x4 29148 MB/s [ 0.246603] raid6: using algorithm avx2x4 (29148 MB/s) [ 0.246688] raid6: using avx2x2 recovery algorithm [ 0.246808] ACPI: Added _OSI(Module Device) [ 0.246892] ACPI: Added _OSI(Processor Device) [ 0.246977] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.247063] ACPI: Added _OSI(Processor Aggregator Device) [ 0.248173] ACPI: EC: Look up EC in DSDT [ 0.249206] ACPI: Executed 1 blocks of module-level executable AML code [ 0.250744] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.272695] ACPI: SSDT 000000008c856c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.273147] ACPI: Dynamic OEM Table Load: [ 0.273290] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.277779] ACPI: SSDT 000000008c856618 005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.278270] ACPI: Dynamic OEM Table Load: [ 0.278413] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.282720] ACPI: SSDT 000000008c855d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.283169] ACPI: Dynamic OEM Table Load: [ 0.283312] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.288375] ACPI: Interpreter enabled [ 0.288462] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.288664] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.288874] ACPI: (supports S0 S3 S4 S5) [ 0.288958] ACPI: Using IOAPIC for interrupt routing [ 0.289070] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.289310] ACPI: No dock devices found. [ 0.294966] ACPI: Power Resource [FN00] (off) [ 0.295107] ACPI: Power Resource [FN01] (off) [ 0.295246] ACPI: Power Resource [FN02] (on) [ 0.295389] ACPI: Power Resource [FN03] (on) [ 0.295532] ACPI: Power Resource [FN04] (on) [ 0.296140] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.296336] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.296527] acpi PNP0A08:00: ACPI _OSC control (0x18) granted [ 0.296840] PCI host bridge to bus 0000:00 [ 0.296926] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.297013] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.297101] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.297189] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.297278] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.297367] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.297456] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.297545] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.297634] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.297725] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.297814] pci_bus 0000:00: root bus resource [mem 0x9f200000-0xfeafffff] [ 0.297907] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.297968] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.297990] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.298022] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.298135] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.298143] pci 0000:00:02.0: reg 0x10: [mem 0xee400000-0xee7fffff 64bit] [ 0.298147] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.298150] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.298205] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.298209] pci 0000:00:03.0: reg 0x10: [mem 0xeeb34000-0xeeb37fff 64bit] [ 0.298283] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.298297] pci 0000:00:14.0: reg 0x10: [mem 0xeeb20000-0xeeb2ffff 64bit] [ 0.298345] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.298370] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.298483] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.298498] pci 0000:00:16.0: reg 0x10: [mem 0xeeb3e000-0xeeb3e00f 64bit] [ 0.298549] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.298605] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 0.298619] pci 0000:00:19.0: reg 0x10: [mem 0xeeb00000-0xeeb1ffff] [ 0.298625] pci 0000:00:19.0: reg 0x14: [mem 0xeeb3c000-0xeeb3cfff] [ 0.298631] pci 0000:00:19.0: reg 0x18: [io 0xf060-0xf07f] [ 0.298678] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.298704] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.298822] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.298838] pci 0000:00:1a.0: reg 0x10: [mem 0xeeb3b000-0xeeb3b3ff] [ 0.298911] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.298947] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.299063] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.299074] pci 0000:00:1b.0: reg 0x10: [mem 0xeeb30000-0xeeb33fff 64bit] [ 0.299125] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.299152] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.299263] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.299313] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.299341] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.299451] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.299501] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.299531] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.299642] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.299692] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.299721] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.299832] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.299883] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.299911] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.300029] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.300046] pci 0000:00:1d.0: reg 0x10: [mem 0xeeb3a000-0xeeb3a3ff] [ 0.300119] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.300154] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.300269] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 0.300398] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.300409] pci 0000:00:1f.3: reg 0x10: [mem 0xeeb39000-0xeeb390ff 64bit] [ 0.300425] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.300504] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.300633] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.300720] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.300722] pci 0000:00:1c.0: bridge window [mem 0x9f200000-0x9f3fffff] [ 0.300726] pci 0000:00:1c.0: bridge window [mem 0x9f400000-0x9f5fffff 64bit pref] [ 0.300781] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601 [ 0.300794] pci 0000:03:00.0: reg 0x10: [io 0xe050-0xe057] [ 0.300804] pci 0000:03:00.0: reg 0x14: [io 0xe040-0xe043] [ 0.300815] pci 0000:03:00.0: reg 0x18: [io 0xe030-0xe037] [ 0.300825] pci 0000:03:00.0: reg 0x1c: [io 0xe020-0xe023] [ 0.300834] pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe01f] [ 0.300844] pci 0000:03:00.0: reg 0x24: [mem 0xeea00000-0xeea001ff] [ 0.300912] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.302845] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.302932] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.302935] pci 0000:00:1c.1: bridge window [mem 0xeea00000-0xeeafffff] [ 0.302999] pci 0000:04:00.0: [10b5:8605] type 01 class 0x060400 [ 0.303015] pci 0000:04:00.0: reg 0x10: [mem 0xee900000-0xee903fff] [ 0.303111] pci 0000:04:00.0: supports D1 D2 [ 0.303112] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.304853] pci 0000:00:1c.3: PCI bridge to [bus 04-08] [ 0.304942] pci 0000:00:1c.3: bridge window [mem 0xee800000-0xee9fffff] [ 0.305043] pci 0000:05:01.0: [10b5:8605] type 01 class 0x060400 [ 0.305156] pci 0000:05:01.0: supports D1 D2 [ 0.305157] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305216] pci 0000:05:02.0: [10b5:8605] type 01 class 0x060400 [ 0.305329] pci 0000:05:02.0: supports D1 D2 [ 0.305330] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305388] pci 0000:05:03.0: [10b5:8605] type 01 class 0x060400 [ 0.305501] pci 0000:05:03.0: supports D1 D2 [ 0.305502] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305581] pci 0000:04:00.0: PCI bridge to [bus 05-08] [ 0.305677] pci 0000:04:00.0: bridge window [mem 0xee800000-0xee8fffff] [ 0.305762] pci 0000:05:01.0: PCI bridge to [bus 06] [ 0.305944] pci 0000:05:02.0: PCI bridge to [bus 07] [ 0.306150] pci 0000:08:00.0: [168c:0034] type 00 class 0x028000 [ 0.306181] pci 0000:08:00.0: reg 0x10: [mem 0xee800000-0xee87ffff 64bit] [ 0.306259] pci 0000:08:00.0: reg 0x30: [mem 0xee880000-0xee88ffff pref] [ 0.306338] pci 0000:08:00.0: supports D1 D2 [ 0.306339] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.307887] pci 0000:05:03.0: PCI bridge to [bus 08] [ 0.307982] pci 0000:05:03.0: bridge window [mem 0xee800000-0xee8fffff] [ 0.308060] pci 0000:00:1c.4: PCI bridge to [bus 09-41] [ 0.308147] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.308149] pci 0000:00:1c.4: bridge window [mem 0xd8000000-0xee0fffff] [ 0.308153] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xd1ffffff 64bit pref] [ 0.308185] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.308702] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled. [ 0.309253] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15), disabled. [ 0.309799] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15), disabled. [ 0.310347] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled. [ 0.310893] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled. [ 0.311438] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15), disabled. [ 0.311985] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15), disabled. [ 0.312532] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15), disabled. [ 0.313299] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.313447] ACPI: \_SB_.PCI0: notify handler is installed [ 0.313485] Found 1 acpi root devices [ 0.313493] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62 [ 0.313647] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.313787] vgaarb: loaded [ 0.313869] vgaarb: bridge control possible 0000:00:02.0 [ 0.314018] SCSI subsystem initialized [ 0.314150] libata version 3.00 loaded. [ 0.314197] ACPI: bus type USB registered [ 0.314308] usbcore: registered new interface driver usbfs [ 0.314407] usbcore: registered new interface driver hub [ 0.314511] usbcore: registered new device driver usb [ 0.314643] pps_core: LinuxPPS API ver. 1 registered [ 0.314729] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.314880] PTP clock support registered [ 0.315031] PCI: Using ACPI for IRQ routing [ 0.317411] PCI: pci_cache_line_size set to 64 bytes [ 0.317457] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.317458] e820: reserve RAM buffer [mem 0x7a4b6000-0x7bffffff] [ 0.317459] e820: reserve RAM buffer [mem 0x7a908000-0x7bffffff] [ 0.317460] e820: reserve RAM buffer [mem 0x8c659000-0x8fffffff] [ 0.317461] e820: reserve RAM buffer [mem 0x8e000000-0x8fffffff] [ 0.317462] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff] [ 0.317539] NetLabel: Initializing [ 0.317623] NetLabel: domain hash size = 128 [ 0.317707] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.317797] NetLabel: unlabeled traffic allowed by default [ 0.317943] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.318299] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.320402] Switched to clocksource hpet [ 0.320519] pnp: PnP ACPI init [ 0.320603] ACPI: bus type PNP registered [ 0.320730] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.320819] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.320825] pnp 00:01: [dma 4] [ 0.320844] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.320865] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.320940] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.320978] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.321053] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.321141] system 00:05: [io 0xffff] has been reserved [ 0.321228] system 00:05: [io 0xffff] has been reserved [ 0.321315] system 00:05: [io 0xffff] has been reserved [ 0.321408] system 00:05: [io 0x1c00-0x1cfe] has been reserved [ 0.321496] system 00:05: [io 0x1d00-0x1dfe] has been reserved [ 0.321584] system 00:05: [io 0x1e00-0x1efe] has been reserved [ 0.321672] system 00:05: [io 0x1f00-0x1ffe] has been reserved [ 0.321759] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 0.321847] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.321935] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.321964] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.322002] system 00:07: [io 0x1854-0x1857] has been reserved [ 0.322090] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.322150] system 00:08: [io 0x0290-0x029f] has been reserved [ 0.322238] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.322279] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.322368] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.322629] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.322718] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.322807] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.322897] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.322986] system 00:0a: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.323075] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.323164] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.323253] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.323341] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved [ 0.323436] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.323526] system 00:0a: [mem 0xeffef000-0xeffeffff] has been reserved [ 0.323615] system 00:0a: [mem 0xefff0000-0xefff0fff] has been reserved [ 0.323704] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.323845] pnp: PnP ACPI: found 11 devices [ 0.323930] ACPI: bus type PNP unregistered [ 0.330716] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.330806] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.330892] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.330983] pci 0000:00:1c.0: bridge window [mem 0x9f200000-0x9f3fffff] [ 0.331073] pci 0000:00:1c.0: bridge window [mem 0x9f400000-0x9f5fffff 64bit pref] [ 0.331214] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.331301] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.331391] pci 0000:00:1c.1: bridge window [mem 0xeea00000-0xeeafffff] [ 0.331491] pci 0000:05:01.0: PCI bridge to [bus 06] [ 0.331590] pci 0000:05:02.0: PCI bridge to [bus 07] [ 0.331690] pci 0000:05:03.0: PCI bridge to [bus 08] [ 0.331781] pci 0000:05:03.0: bridge window [mem 0xee800000-0xee8fffff] [ 0.331879] pci 0000:04:00.0: PCI bridge to [bus 05-08] [ 0.331970] pci 0000:04:00.0: bridge window [mem 0xee800000-0xee8fffff] [ 0.332068] pci 0000:00:1c.3: PCI bridge to [bus 04-08] [ 0.332156] pci 0000:00:1c.3: bridge window [mem 0xee800000-0xee9fffff] [ 0.332250] pci 0000:00:1c.4: PCI bridge to [bus 09-41] [ 0.332337] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.332431] pci 0000:00:1c.4: bridge window [mem 0xd8000000-0xee0fffff] [ 0.333948] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xd1ffffff 64bit pref] [ 0.334090] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.334091] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.334092] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.334093] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.334094] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.334095] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.334096] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.334097] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.334098] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.334099] pci_bus 0000:00: resource 13 [mem 0x9f200000-0xfeafffff] [ 0.334100] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.334101] pci_bus 0000:02: resource 1 [mem 0x9f200000-0x9f3fffff] [ 0.334102] pci_bus 0000:02: resource 2 [mem 0x9f400000-0x9f5fffff 64bit pref] [ 0.334103] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.334104] pci_bus 0000:03: resource 1 [mem 0xeea00000-0xeeafffff] [ 0.334105] pci_bus 0000:04: resource 1 [mem 0xee800000-0xee9fffff] [ 0.334106] pci_bus 0000:05: resource 1 [mem 0xee800000-0xee8fffff] [ 0.334107] pci_bus 0000:08: resource 1 [mem 0xee800000-0xee8fffff] [ 0.334108] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff] [ 0.334109] pci_bus 0000:09: resource 1 [mem 0xd8000000-0xee0fffff] [ 0.334111] pci_bus 0000:09: resource 2 [mem 0xb0000000-0xd1ffffff 64bit pref] [ 0.334125] NET: Registered protocol family 2 [ 0.334319] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.334567] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.334726] TCP: Hash tables configured (established 65536 bind 65536) [ 0.334823] TCP: reno registered [ 0.334911] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.335015] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.335139] NET: Registered protocol family 1 [ 0.335266] RPC: Registered named UNIX socket transport module. [ 0.335353] RPC: Registered udp transport module. [ 0.335443] RPC: Registered tcp transport module. [ 0.335529] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.335620] pci 0000:00:02.0: Boot video device [ 0.335785] PCI: CLS mismatch (64 != 128), using 64 bytes [ 0.360361] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.360462] software IO TLB [mem 0x88659000-0x8c659000] (64MB) mapped at [ffff880088659000-ffff88008c658fff] [ 0.361592] audit: initializing netlink socket (disabled) [ 0.361684] type=2000 audit(1384200139.344:1): initialized [ 0.377797] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.379500] VFS: Disk quotas dquot_6.5.2 [ 0.379623] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.380406] NFS: Registering the id_resolver key type [ 0.380507] Key type id_resolver registered [ 0.380591] Key type id_legacy registered [ 0.380678] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.380894] fuse init (API version 7.22) [ 0.381248] bio: create slab at 1 [ 0.381478] Btrfs loaded [ 0.381563] msgmni has been set to 15218 [ 0.381847] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.381985] io scheduler noop registered [ 0.382069] io scheduler deadline registered [ 0.382182] io scheduler cfq registered (default) [ 0.382381] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.382648] pcieport 0000:00:1c.3: driver skip pci_set_master, fix it! [ 0.382789] pcieport 0000:04:00.0: irq 41 for MSI/MSI-X [ 0.382934] pcieport 0000:05:01.0: irq 42 for MSI/MSI-X [ 0.383078] pcieport 0000:05:02.0: irq 43 for MSI/MSI-X [ 0.383223] pcieport 0000:05:03.0: irq 44 for MSI/MSI-X [ 0.383355] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.383568] ACPI: Fan [FAN0] (off) [ 0.383679] ACPI: Fan [FAN1] (off) [ 0.383788] ACPI: Fan [FAN2] (on) [ 0.383898] ACPI: Fan [FAN3] (on) [ 0.384007] ACPI: Fan [FAN4] (on) [ 0.384130] ACPI: Requesting acpi_cpufreq [ 0.384501] Monitor-Mwait will be used to enter C-1 state [ 0.384510] Monitor-Mwait will be used to enter C-2 state [ 0.384519] ACPI: acpi_idle registered with cpuidle [ 0.385810] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.385898] ACPI: Thermal Zone [TZ00] (28 C) [ 0.386110] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.386197] ACPI: Thermal Zone [TZ01] (30 C) [ 0.386340] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.386924] Non-volatile memory driver v1.3 [ 0.387009] Linux agpgart interface v0.103 [ 0.388290] brd: module loaded [ 0.388574] Loading iSCSI transport class v2.0-870. [ 0.388991] iscsi: registered transport (tcp) [ 0.389165] Adaptec aacraid driver 1.2-0[30200]-ms [ 0.389297] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.389493] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k. [ 0.389679] iscsi: registered transport (qla4xxx) [ 0.389787] QLogic iSCSI HBA Driver [ 0.389926] DC390: clustering now enabled by default. If you get problems load [ 0.390064] with "disable_clustering=1" and report to maintainers [ 0.390208] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.390362] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.390479] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.390615] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.390755] osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.391028] SCSI Media Changer driver v0.25 [ 0.391159] ahci 0000:03:00.0: version 3.0 [ 0.391162] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it! [ 0.391294] ahci 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.391314] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled [ 0.391429] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.391583] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc [ 0.391938] scsi0 : ahci [ 0.392090] scsi1 : ahci [ 0.392223] ata1: SATA max UDMA/133 abar m512@0xeea00000 port 0xeea00100 irq 45 [ 0.392362] ata2: SATA max UDMA/133 abar m512@0xeea00000 port 0xeea00180 irq 45 [ 0.393847] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013) [ 0.394004] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11) [ 0.394210] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.394297] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.394410] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.394512] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.394642] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.394729] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 0.394863] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.394894] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.395044] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 0.560537] e1000e 0000:00:19.0 eth0: registered PHC clock [ 0.560633] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d0:2b:95:69:65 [ 0.560772] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.560884] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.561018] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 0.561109] igb: Copyright (c) 2007-2013 Intel Corporation. [ 0.561278] usbcore: registered new interface driver zd1201 [ 0.561403] usbcore: registered new interface driver catc [ 0.561527] usbcore: registered new interface driver kaweth [ 0.561619] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.561795] usbcore: registered new interface driver pegasus [ 0.561920] usbcore: registered new interface driver rtl8150 [ 0.562047] usbcore: registered new interface driver asix [ 0.562171] usbcore: registered new interface driver ax88179_178a [ 0.562296] usbcore: registered new interface driver cdc_ether [ 0.562420] usbcore: registered new interface driver r815x [ 0.562543] usbcore: registered new interface driver dm9601 [ 0.562663] usbcore: registered new interface driver gl620a [ 0.562788] usbcore: registered new interface driver net1080 [ 0.562912] usbcore: registered new interface driver plusb [ 0.563035] usbcore: registered new interface driver rndis_host [ 0.563160] usbcore: registered new interface driver cdc_subset [ 0.563283] usbcore: registered new interface driver zaurus [ 0.563405] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.563582] usbcore: registered new interface driver cdc_ncm [ 0.563795] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.563884] ehci-pci: EHCI PCI platform driver [ 0.564022] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.564026] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.564154] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.564300] ehci-pci 0000:00:1a.0: debug port 2 [ 0.568270] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.568278] ehci-pci 0000:00:1a.0: irq 16, io mem 0xeeb3b000 [ 0.573651] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.573754] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.573844] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.573982] usb usb1: Product: EHCI Host Controller [ 0.574068] usb usb1: Manufacturer: Linux 3.12.0_nightlytop_06653b_20131110_+ ehci_hcd [ 0.574207] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.574377] hub 1-0:1.0: USB hub found [ 0.574464] hub 1-0:1.0: 2 ports detected [ 0.574645] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.574649] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.574783] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.574929] ehci-pci 0000:00:1d.0: debug port 2 [ 0.578899] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.578907] ehci-pci 0000:00:1d.0: irq 23, io mem 0xeeb3a000 [ 0.584660] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.584758] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.584847] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.584985] usb usb2: Product: EHCI Host Controller [ 0.585071] usb usb2: Manufacturer: Linux 3.12.0_nightlytop_06653b_20131110_+ ehci_hcd [ 0.585210] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.585412] hub 2-0:1.0: USB hub found [ 0.585498] hub 2-0:1.0: 2 ports detected [ 0.585684] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.585773] ohci-pci: OHCI PCI platform driver [ 0.585880] uhci_hcd: USB Universal Host Controller Interface driver [ 0.586047] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.586049] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.586191] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.586392] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.586403] xhci_hcd 0000:00:14.0: irq 47 for MSI/MSI-X [ 0.586436] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.586526] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.586674] usb usb3: Product: xHCI Host Controller [ 0.586765] usb usb3: Manufacturer: Linux 3.12.0_nightlytop_06653b_20131110_+ xhci_hcd [ 0.586904] usb usb3: SerialNumber: 0000:00:14.0 [ 0.587107] hub 3-0:1.0: USB hub found [ 0.587201] hub 3-0:1.0: 14 ports detected [ 0.588516] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.588666] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.588820] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.588909] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.589046] usb usb4: Product: xHCI Host Controller [ 0.589133] usb usb4: Manufacturer: Linux 3.12.0_nightlytop_06653b_20131110_+ xhci_hcd [ 0.589271] usb usb4: SerialNumber: 0000:00:14.0 [ 0.589469] hub 4-0:1.0: USB hub found [ 0.591003] hub 4-0:1.0: 6 ports detected [ 0.595799] usbcore: registered new interface driver usb-storage [ 0.596060] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.598446] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.598538] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.598776] mousedev: PS/2 mouse device common for all mice [ 0.599007] rtc_cmos 00:06: RTC can wake from S4 [ 0.599208] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.599317] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.599502] i2c /dev entries driver [ 0.599683] hidraw: raw HID events driver (C) Jiri Kosina [ 0.600247] usbcore: registered new interface driver usbhid [ 0.600333] usbhid: USB HID core driver [ 0.600498] TCP: cubic registered [ 0.600582] Initializing XFRM netlink socket [ 0.600680] NET: Registered protocol family 17 [ 0.600776] Key type dns_resolver registered [ 0.601295] registered taskstats version 1 [ 0.601767] Magic number: 5:939:42 [ 0.601902] PM: Hibernation image not present or could not be loaded. [ 0.601912] Warning: unable to open an initial console. [ 0.698787] ata1: SATA link down (SStatus 0 SControl 300) [ 0.875962] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.990429] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 0.990520] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.990949] hub 1-1:1.0: USB hub found [ 0.991179] hub 1-1:1.0: 6 ports detected [ 1.094130] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159189] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.170409] ata2.00: ATA-9: INTEL SSDSC2CW480A3, 400i, max UDMA/133 [ 1.170499] ata2.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.180342] ata2.00: configured for UDMA/133 [ 1.180588] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CW48 400i PQ: 0 ANSI: 5 [ 1.181066] sd 1:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 1.181116] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.181461] sd 1:0:0:0: [sda] Write Protect is off [ 1.181549] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.181571] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.182262] sda: sda1 sda2 [ 1.182731] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.187057] Freeing unused kernel memory: 62384K (ffffffff81b36000 - ffffffff85822000) [ 1.206361] dracut: dracut-018-35.git20120510.fc17 [ 1.208598] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.208691] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.209009] hub 2-1:1.0: USB hub found [ 1.209224] hub 2-1:1.0: 8 ports detected [ 1.222237] udevd[1303]: starting version 182 [ 1.230424] [drm] Initialized drm 1.1.0 20060810 [ 1.230881] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 1.231125] ACPI: Power Button [PWRB] [ 1.231303] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.231562] ACPI: Power Button [PWRF] [ 1.233331] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0412 flags=need_gfx_hws,is_haswell,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 1.233422] [drm:intel_detect_pch], [ 1.233424] Found LynxPoint PCH [ 1.233635] [drm] Memory usable by graphics device = 2048M [ 1.233749] [drm:i915_gem_gtt_init], GMADR size = 256M [ 1.233751] [drm:i915_gem_gtt_init], GTT stolen size = 256M [ 1.233755] i915 0000:00:02.0: setting latency timer to 64 [ 1.243105] [drm:intel_opregion_setup], graphic opregion physical addr: 0x8cab1018 [ 1.243112] [drm:intel_opregion_setup], Public ACPI methods supported [ 1.243113] [drm:intel_opregion_setup], SWSCI supported [ 1.248278] [drm:swsci_setup], SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 1.248280] [drm:intel_opregion_setup], ASLE supported [ 1.248316] i915 0000:00:02.0: irq 48 for MSI/MSI-X [ 1.248321] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.248410] [drm] Driver supports precise vblank timestamp query. [ 1.248498] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 1.248500] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL d [ 1.248501] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.248502] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 1.248504] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.248505] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.248507] [drm:parse_lfp_panel_data], VBT initial LVDS value 300 [ 1.248508] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 1.248509] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.248511] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.248512] [drm:parse_mipi], No MIPI BDB found [ 1.248513] [drm:parse_ddi_port], [ 1.248514] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.248599] [drm:parse_ddi_port], VBT HDMI level shift for port B: 11 [ 1.248600] [drm:parse_ddi_port], Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.248601] [drm:parse_ddi_port], VBT HDMI level shift for port C: 6 [ 1.248602] [drm:parse_ddi_port], Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.248603] [drm:parse_ddi_port], VBT HDMI level shift for port D: 6 [ 1.248606] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 1.248609] [drm:i915_gem_init_stolen], found 268435456 bytes of stolen memory at 8f200000 [ 1.248633] [drm:intel_print_wm_latency], Primary WM0 latency 20 (2.0 usec) [ 1.248634] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec) [ 1.248635] [drm:intel_print_wm_latency], Primary WM2 latency 36 (18.0 usec) [ 1.248636] [drm:intel_print_wm_latency], Primary WM3 latency 90 (45.0 usec) [ 1.248636] [drm:intel_print_wm_latency], Primary WM4 latency 160 (80.0 usec) [ 1.248637] [drm:intel_print_wm_latency], Sprite WM0 latency 20 (2.0 usec) [ 1.248638] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec) [ 1.248639] [drm:intel_print_wm_latency], Sprite WM2 latency 36 (18.0 usec) [ 1.248640] [drm:intel_print_wm_latency], Sprite WM3 latency 90 (45.0 usec) [ 1.248641] [drm:intel_print_wm_latency], Sprite WM4 latency 160 (80.0 usec) [ 1.248642] [drm:intel_print_wm_latency], Cursor WM0 latency 20 (2.0 usec) [ 1.248643] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec) [ 1.248643] [drm:intel_print_wm_latency], Cursor WM2 latency 36 (18.0 usec) [ 1.248644] [drm:intel_print_wm_latency], Cursor WM3 latency 90 (45.0 usec) [ 1.248645] [drm:intel_print_wm_latency], Cursor WM4 latency 160 (80.0 usec) [ 1.248646] [drm:intel_modeset_init], 3 display pipes available. [ 1.248653] [drm:intel_ddi_pll_init], CDCLK running at 540000KHz [ 1.248654] [drm:intel_shared_dpll_init], 0 shared PLLs initialized [ 1.248656] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.249373] [drm:intel_dp_init_connector], Adding DP connector on port D [ 1.249426] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 1.251877] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f [ 1.251886] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.254332] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f [ 1.254338] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.268246] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000] [ 1.269677] [drm:init_status_page], render ring hws offset: 0x00000000 [ 1.271262] [drm:init_pipe_control], render ring pipe control offset: 0x00021000 [ 1.271266] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 1.271311] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 1.271349] [drm:init_status_page], video enhancement ring hws offset: 0x00064000 [ 1.271412] [drm:create_default_context], Default HW context loaded [ 1.271413] [drm:i915_gem_context_init], HW context support initialized [ 1.271478] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 1.271480] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled [ 1.271482] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled [ 1.271483] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port E using clock 0x60000000 [ 1.271487] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: enabled, pipe A [ 1.271489] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe A [ 1.271490] [drm:intel_modeset_readout_hw_state], [ENCODER:15:TMDS-15] hw state readout: disabled, pipe A [ 1.271492] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A [ 1.271494] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: enabled [ 1.271496] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:HDMI-A-1] hw state readout: disabled [ 1.271497] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:HDMI-A-2] hw state readout: disabled [ 1.271499] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:DP-1] hw state readout: disabled [ 1.271500] [drm:intel_modeset_readout_hw_state], [CONNECTOR:19:HDMI-A-3] hw state readout: disabled [ 1.271503] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 1.271504] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.271505] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.271507] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 1, gmch_m: 2639615, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64 [ 1.271509] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.271510] [drm:intel_dump_pipe_config], requested mode: [ 1.271511] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0 [ 1.271514] [drm:intel_dump_pipe_config], adjusted mode: [ 1.271515] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6 [ 1.271517] [drm:intel_dump_crtc_timings], crtc timings: 0 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6 [ 1.271519] [drm:intel_dump_pipe_config], port clock: 0 [ 1.271520] [drm:intel_dump_pipe_config], pipe src size: 720x400 [ 1.271521] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.271523] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x02d00190, enabled [ 1.271524] [drm:intel_dump_pipe_config], ips: 0 [ 1.271525] [drm:intel_dump_pipe_config], double wide: 0 [ 1.271527] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B [ 1.271528] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.271529] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.271530] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.271532] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.271533] [drm:intel_dump_pipe_config], requested mode: [ 1.271534] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.271536] [drm:intel_dump_pipe_config], adjusted mode: [ 1.271537] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.271539] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.271541] [drm:intel_dump_pipe_config], port clock: 0 [ 1.271542] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 1.271543] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.271545] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.271546] [drm:intel_dump_pipe_config], ips: 0 [ 1.271547] [drm:intel_dump_pipe_config], double wide: 0 [ 1.271549] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C [ 1.271550] [drm:intel_dump_pipe_config], cpu_transcoder: C [ 1.271551] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.271552] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.271554] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.271555] [drm:intel_dump_pipe_config], requested mode: [ 1.271556] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.271558] [drm:intel_dump_pipe_config], adjusted mode: [ 1.271559] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.271561] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.271563] [drm:intel_dump_pipe_config], port clock: 0 [ 1.271564] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 1.271565] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.271566] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.271568] [drm:intel_dump_pipe_config], ips: 0 [ 1.271569] [drm:intel_dump_pipe_config], double wide: 0 [ 1.271572] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1] [ 1.271575] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 1.271577] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 1.271578] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 1.271579] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 1.271581] [drm:check_crtc_state], [CRTC:3] [ 1.271587] [drm:check_crtc_state], [CRTC:5] [ 1.271588] [drm:check_crtc_state], [CRTC:7] [ 1.271592] [drm:intel_crt_reset], pch crt adpa set to 0x80f40010 [ 1.271600] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 1.271602] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 1.271604] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x83f40010 [ 1.280258] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40010, result 1 [ 1.280259] [drm:intel_crt_detect], CRT detected via hotplug [ 1.293282] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 1.293290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes : [ 1.293291] [drm:drm_mode_debug_printmodeline], Modeline 21:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5 [ 1.293294] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.293296] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.293298] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.293300] [drm:drm_mode_debug_printmodeline], Modeline 24:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.293303] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.293305] [drm:drm_mode_debug_printmodeline], Modeline 34:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 1.293307] [drm:drm_mode_debug_printmodeline], Modeline 35:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.293309] [drm:drm_mode_debug_printmodeline], Modeline 36:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 1.293311] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.293314] [drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 1.293316] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.293318] [drm:drm_mode_debug_printmodeline], Modeline 26:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1.293320] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.293322] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 1.293324] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 1.293326] [drm:drm_mode_debug_printmodeline], Modeline 30:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.293329] [drm:drm_mode_debug_printmodeline], Modeline 31:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.293331] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 1.293333] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 1.293483] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.293484] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 1.293486] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 1.293487] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] [ 1.293489] [drm:intel_hdmi_detect], [CONNECTOR:16:HDMI-A-2] [ 1.293638] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.293640] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.293641] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] disconnected [ 1.293643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 1.293644] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 1.293646] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 1.293648] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:HDMI-A-3] [ 1.293649] [drm:intel_hdmi_detect], [CONNECTOR:19:HDMI-A-3] [ 1.293798] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 1.293799] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 1.293801] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:HDMI-A-3] disconnected [ 1.293802] [drm:drm_setup_crtcs], [ 1.293803] [drm:drm_enable_connectors], connector 9 enabled? yes [ 1.293804] [drm:drm_enable_connectors], connector 12 enabled? no [ 1.293806] [drm:drm_enable_connectors], connector 16 enabled? no [ 1.293807] [drm:drm_enable_connectors], connector 18 enabled? no [ 1.293808] [drm:drm_enable_connectors], connector 19 enabled? no [ 1.293809] [drm:drm_target_preferred], looking for cmdline mode on connector 9 [ 1.293810] [drm:drm_target_preferred], looking for preferred mode on connector 9 [ 1.293811] [drm:drm_target_preferred], found mode 1680x1050 [ 1.293813] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 1.293814] [drm:drm_setup_crtcs], desired mode 1680x1050 set on crtc 3 [ 1.293816] [drm:i915_gem_object_create_stolen], creating stolen object: size=6bb000 [ 1.293818] [drm:i915_pages_create_for_stolen], offset=0x0, size=7057408 [ 1.294478] [drm:intelfb_create], allocated 1680x1050 fb: 0x000a1000, bo ffff88025111cf00 [ 1.294575] fbcon: inteldrmfb (fb0) is primary device [ 1.295583] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 1.295584] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 1.295585] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 1.295587] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.295590] [drm:drm_mode_debug_printmodeline], Modeline 39:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5 [ 1.295591] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 [ 1.295592] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.295594] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.295595] [drm:connected_sink_compute_bpp], [CONNECTOR:9:VGA-1] checking for sink bpp constrains [ 1.295596] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 2 [ 1.295598] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.295599] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 1.295599] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.295600] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.295602] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 2, gmch_m: 6815744, gmch_n: 8388608, link_m: 283989, link_n: 524288, tu: 64 [ 1.295603] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.295603] [drm:intel_dump_pipe_config], requested mode: [ 1.295605] [drm:drm_mode_debug_printmodeline], Modeline 0:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5 [ 1.295606] [drm:intel_dump_pipe_config], adjusted mode: [ 1.295608] [drm:drm_mode_debug_printmodeline], Modeline 0:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5 [ 1.295610] [drm:intel_dump_crtc_timings], crtc timings: 146250 1680 1784 1960 2240 1050 1053 1059 1089, type: 0x48 flags: 0x5 [ 1.295610] [drm:intel_dump_pipe_config], port clock: 146250 [ 1.295611] [drm:intel_dump_pipe_config], pipe src size: 1680x1050 [ 1.295612] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.295613] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.295614] [drm:intel_dump_pipe_config], ips: 0 [ 1.295614] [drm:intel_dump_pipe_config], double wide: 0 [ 1.311298] [drm:intel_ddi_put_crtc_pll], Disabling SPLL [ 1.311300] [drm:intel_ddi_pll_mode_set], Using SPLL on pipe A [ 1.311332] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 6720 [ 1.311335] [drm:intel_crtc_mode_set], [ENCODER:10:DAC-10] set [MODE:0:1680x1050] [ 1.312200] [drm:hsw_fdi_link_train], FDI link training done on step 0 [ 1.363342] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.364329] [drm:g4x_wait_for_vblank], vblank wait timed out [ 1.364340] [drm:lpt_program_iclkip], iCLKIP clock: found settings for 146250KHz refresh rate: auxdiv=0, divsel=10, phasedir=0, phaseinc=1d [ 1.364349] tsc: Refined TSC clocksource calibration: 3497.972 MHz [ 1.376252] usb 3-3: New USB device found, idVendor=174c, idProduct=2074 [ 1.376253] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.376254] usb 3-3: Product: ASM107x [ 1.376255] usb 3-3: Manufacturer: Asmedia [ 1.376256] usb 3-3: SerialNumber: 00000000A001 [ 1.376630] hub 3-3:1.0: USB hub found [ 1.376768] hub 3-3:1.0: 4 ports detected [ 1.406369] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1] [ 1.406371] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 1.406372] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 1.406373] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 1.406374] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 1.406375] [drm:check_crtc_state], [CRTC:3] [ 1.406381] [drm:check_crtc_state], [CRTC:5] [ 1.406382] [drm:check_crtc_state], [CRTC:7] [ 1.406383] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 1.406385] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 1.406386] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.406387] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 1.406388] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 1.406389] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.406402] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 1.406403] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.406404] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.411647] Console: switching to colour frame buffer device 210x65 [ 1.411649] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 1.411650] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.411651] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.417222] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.417252] i915 0000:00:02.0: registered panic notifier [ 1.423400] [drm:asle_set_backlight], bclp = 0x80000002 [ 1.423402] [drm:asle_set_backlight], updating opregion backlight 2/255 [ 1.423404] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 1.423457] [drm:asle_set_backlight], bclp = 0x800000ff [ 1.423458] [drm:asle_set_backlight], updating opregion backlight 255/255 [ 1.423460] [drm:intel_panel_get_max_backlight], max backlight PWM = 0 [ 1.423605] acpi device:5d: registered as cooling_device13 [ 1.423659] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.423759] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.423875] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.426308] dracut: Starting plymouth daemon [ 1.430662] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 1.430664] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.430665] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.436414] [drm:i915_gem_open], [ 1.436421] [drm:intel_crtc_cursor_set], cursor off [ 1.436422] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 1.436424] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.436425] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.436426] [drm:intel_crtc_cursor_set], cursor off [ 1.436427] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 1.436428] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 1.436429] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.436430] [drm:intel_crtc_cursor_set], cursor off [ 1.436431] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 1.436432] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 1.436433] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.436436] [drm:i915_gem_open], [ 1.436438] [drm:intel_crtc_cursor_set], cursor off [ 1.436439] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 1.436440] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.436441] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.436442] [drm:intel_crtc_cursor_set], cursor off [ 1.436443] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 1.436444] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 1.436445] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.436445] [drm:intel_crtc_cursor_set], cursor off [ 1.436446] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 1.436447] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 1.436448] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.436450] [drm:i915_gem_open], [ 1.436479] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[4] [ 1.436481] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[4] [ 1.436484] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 1.436485] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 1.436487] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 1.436488] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x83f40018, result 1 [ 1.436489] [drm:intel_crt_detect], CRT detected via hotplug [ 1.449590] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 1.449598] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes : [ 1.449599] [drm:drm_mode_debug_printmodeline], Modeline 21:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x5 [ 1.449601] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.449602] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.449604] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.449605] [drm:drm_mode_debug_printmodeline], Modeline 24:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.449606] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.449608] [drm:drm_mode_debug_printmodeline], Modeline 34:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 1.449609] [drm:drm_mode_debug_printmodeline], Modeline 35:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.449610] [drm:drm_mode_debug_printmodeline], Modeline 36:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 1.449612] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.449613] [drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 1.449615] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.449616] [drm:drm_mode_debug_printmodeline], Modeline 26:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1.449617] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.449618] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 1.449620] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 1.449621] [drm:drm_mode_debug_printmodeline], Modeline 30:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.449623] [drm:drm_mode_debug_printmodeline], Modeline 31:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.449626] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 1.452184] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 1.452186] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 1.452187] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 1.452339] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.452340] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 1.452342] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 1.452344] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 1.452344] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 1.452345] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 1.452529] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.452531] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 1.452533] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 1.452537] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 1.452538] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] [ 1.452539] [drm:intel_hdmi_detect], [CONNECTOR:16:HDMI-A-2] [ 1.452717] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.452720] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.452721] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] disconnected [ 1.452724] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 1.452725] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] [ 1.452726] [drm:intel_hdmi_detect], [CONNECTOR:16:HDMI-A-2] [ 1.452875] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.452876] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.452877] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI-A-2] disconnected [ 1.452879] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 1.452880] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 1.452881] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 1.452883] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 1.452884] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 1.452885] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 1.452886] [drm:intel_dp_detect], [CONNECTOR:18:DP-1] [ 1.452887] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 1.452888] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 1.452890] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:HDMI-A-3] [ 1.452890] [drm:intel_hdmi_detect], [CONNECTOR:19:HDMI-A-3] [ 1.453039] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 1.453040] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 1.453041] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:HDMI-A-3] disconnected [ 1.453042] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 1.453043] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:HDMI-A-3] [ 1.453044] [drm:intel_hdmi_detect], [CONNECTOR:19:HDMI-A-3] [ 1.453192] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 1.453193] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 1.453194] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:HDMI-A-3] disconnected [ 1.456826] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 1.456827] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.456828] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.489126] wmi: Mapper loaded [ 1.497113] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 1.497148] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module [ 1.497158] snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X [ 1.497942] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 1.502992] ALSA sound/pci/hda/hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 6[1]:0 [ 1.503107] ALSA sound/pci/hda/hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 7[1]:0 [ 1.505897] hda_codec: ALC1150: SKU not ready 0x00000000 [ 1.506304] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 1.506306] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 1.506307] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 1.506308] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 1.506309] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x11/0x1e [ 1.506310] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 1.506311] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x19 [ 1.506312] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18 [ 1.506313] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a [ 1.506314] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d [ 1.506315] ALSA sound/pci/hda/patch_realtek.c:574 realtek: Enable default setup for auto mode as fallback [ 1.509013] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 1.509015] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.509017] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.516391] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 1.516437] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.516486] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251) [ 1.516529] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251) [ 1.516571] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.516605] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251) [ 1.516647] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251) [ 1.516708] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.516763] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.516815] kjournald starting. Commit interval 5 seconds [ 1.516900] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 1.516872] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251) [ 1.516981] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.517064] iTCO_vendor_support: vendor-support=0 [ 1.517186] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 1.517224] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 1.517344] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.526325] dracut: Checking ext3: /dev/sda1 [ 1.527239] dracut: issuing e2fsck -a /dev/sda1 [ 1.530536] usb 3-4: new full-speed USB device number 3 using xhci_hcd [ 1.538049] dracut: /dev/sda1: clean, 801789/29179904 files, 24117956/116700160 blocks [ 1.539156] dracut: Remounting /dev/sda1 with -o ro [ 1.542764] usb 3-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 [ 1.544161] kjournald starting. Commit interval 5 seconds [ 1.544209] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 1.545600] usb 3-4: New USB device found, idVendor=0b05, idProduct=17d0 [ 1.545601] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.545838] dracut: Mounted root filesystem /dev/sda1 [ 1.552204] device-mapper: uevent: version 1.0.3 [ 1.553352] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 1.699691] usb 3-9: new low-speed USB device number 4 using xhci_hcd [ 1.720437] usb 3-9: New USB device found, idVendor=03f0, idProduct=0024 [ 1.721515] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.722599] usb 3-9: Product: HP Basic USB Keyboard [ 1.723690] usb 3-9: Manufacturer: CHICONY [ 1.725048] usb 3-9: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.731525] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input7 [ 1.733185] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-9/input0 [ 1.739121] dracut: Switching root [ 1.771265] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 1.774941] systemd[1]: Failed to insert module 'ipv6' [ 1.775055] systemd[1]: Set hostname to . [ 1.788318] LVM: Logical Volume autoactivation enabled. [ 1.789601] LVM: Activation generator successfully completed. [ 1.817274] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 1.818594] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.819905] systemd[1]: Starting Syslog Socket. [ 1.821243] systemd[1]: Listening on Syslog Socket. [ 1.822747] systemd[1]: Starting Replay Read-Ahead Data... [ 1.825439] systemd[1]: Starting Collect Read-Ahead Data... [ 1.826761] systemd-readahead[2459]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 1.829785] systemd[1]: Starting Delayed Shutdown Socket. [ 1.830349] systemd-readahead[2460]: Failed to create fanotify object: Function not implemented [ 1.833673] systemd[1]: Listening on Delayed Shutdown Socket. [ 1.835029] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 1.835857] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 1.837766] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.837786] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 1.841837] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.841874] systemd[1]: Starting udev Kernel Socket. [ 1.844533] systemd[1]: Listening on udev Kernel Socket. [ 1.844565] systemd[1]: Starting udev Control Socket. [ 1.847199] systemd[1]: Listening on udev Control Socket. [ 1.847208] systemd[1]: Starting Journal Socket. [ 1.848658] usb 4-3: New USB device found, idVendor=174c, idProduct=3074 [ 1.848659] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.848660] usb 4-3: Product: ASM107x [ 1.848661] usb 4-3: Manufacturer: Asmedia [ 1.848661] usb 4-3: SerialNumber: 00000000A001 [ 1.849667] hub 4-3:1.0: USB hub found [ 1.849787] hub 4-3:1.0: 4 ports detected [ 1.859504] systemd[1]: Listening on Journal Socket. [ 1.859523] systemd[1]: Mounting POSIX Message Queue File System... [ 1.862003] systemd[1]: Mounting Debug File System... [ 1.864406] systemd[1]: Starting Create static device nodes in /dev... [ 1.866836] systemd[1]: Starting udev Coldplug all Devices... [ 1.869178] systemd[1]: Mounting Huge Pages File System... [ 1.871507] systemd[1]: Starting Journal Service... [ 1.874926] systemd[1]: Started Journal Service. [ 1.875164] systemd[1]: Starting Encrypted Volumes. [ 1.878429] systemd[1]: Reached target Encrypted Volumes. [ 1.878442] systemd[1]: Starting LVM2 metadata daemon socket. [ 1.881843] systemd[1]: Listening on LVM2 metadata daemon socket. [ 1.881852] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 1.885236] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 1.885246] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 1.888737] systemd[1]: Expecting device dev-disk-by\x2duuid-37594da4\x2d4444\x2d4d4b\x2da930\x2d5787e753e191.device... [ 1.890682] systemd[1]: Mounting Temporary Directory... [ 1.893328] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 1.895184] systemd[1]: Started Replay Read-Ahead Data. [ 1.895334] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE [ 1.897557] systemd[1]: Started Collect Read-Ahead Data. [ 1.899903] systemd[1]: Mounted POSIX Message Queue File System. [ 1.901185] systemd[1]: Mounted Debug File System. [ 1.903604] systemd[1]: Started Create static device nodes in /dev. [ 1.904845] systemd[1]: Mounted Huge Pages File System. [ 1.907259] systemd[1]: Mounted Temporary Directory. [ 1.907401] systemd[1]: Starting udev Kernel Device Manager... [ 1.911073] systemd[1]: Starting Load legacy module configuration... [ 1.911986] systemd-udevd[3028]: starting version 204 [ 1.914659] systemd[1]: Started File System Check on Root Device. [ 1.914678] systemd[1]: Starting Remount Root and Kernel File Systems... [ 1.918037] systemd[1]: Starting Setup Virtual Console... [ 1.919645] EXT3-fs (sda1): using internal journal [ 1.922336] systemd[1]: Starting Apply Kernel Variables... [ 1.924726] systemd[1]: Started Load Kernel Modules. [ 1.924755] systemd[1]: Mounted Configuration File System. [ 1.924770] systemd[1]: Mounting FUSE Control File System... [ 1.930275] systemd[1]: Started Set Up Additional Binary Formats. [ 1.931821] systemd[1]: Started udev Kernel Device Manager. [ 1.933276] systemd[1]: Mounted FUSE Control File System. [ 1.933463] systemd[1]: Starting LVM2 metadata daemon... [ 1.937326] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 1.937328] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.937330] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 1.942094] systemd[1]: Started udev Coldplug all Devices. [ 1.943580] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 1.946277] systemd[1]: Started Load legacy module configuration. [ 1.947521] systemd[1]: Started Remount Root and Kernel File Systems. [ 1.949974] systemd[1]: Started Setup Virtual Console. [ 1.951266] systemd[1]: Started Apply Kernel Variables. [ 1.953750] systemd[1]: Started LVM2 metadata daemon. [ 1.955190] systemd[1]: Starting Local File Systems (Pre). [ 1.957300] systemd[1]: Reached target Local File Systems (Pre). [ 1.957319] systemd[1]: Started Import network configuration from initramfs. [ 1.957341] systemd[1]: Starting Configure read-only root support... [ 1.962367] systemd[1]: Starting Show Plymouth Boot Screen... [ 1.965811] systemd[1]: Starting Sound Card. [ 1.967215] systemd[1]: Reached target Sound Card. [ 1.970924] systemd-udevd[3345]: renamed network interface em1 to eno1 [ 1.979593] type=1305 audit(1384200140.960:2): audit_pid=3427 old=0 auid=4294967295 ses=4294967295 res=1 [ 2.011006] Adding 2047996k swap on /dev/sda2. Priority:-1 extents:1 across:2047996k SS [ 2.014682] alsactl[3449]: segfault at 0 ip 0000003f79e4888d sp 00007fff78707290 error 4 in libc-2.17.so[3f79e00000+1b5000] [ 2.221200] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 2.322231] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 2.365423] Switched to clocksource tsc [ 2.725660] [drm:intel_print_rc6_info], Haswell: only RC6 available [ 2.725662] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.729569] [drm:gen6_enable_rps], Overclocking supported. Max: 1250MHz, Overclock max: 1250MHz [ 5.096225] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 13.123667] [drm:intel_crtc_cursor_set], cursor off [ 13.123670] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 13.123673] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 13.123675] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 13.123676] [drm:intel_crtc_cursor_set], cursor off [ 13.123677] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 13.123678] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 13.123679] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 13.123680] [drm:intel_crtc_cursor_set], cursor off [ 13.123681] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 13.123682] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 13.123683] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 37.442913] NET: Registered protocol family 10 [ 42.846679] Console: switching to colour VGA+ 80x25 [ 42.853417] [drm:intel_crtc_cursor_set], cursor off [ 42.853420] [drm:intel_crtc_set_config], [CRTC:3] [FB:40] #connectors=1 (x y) (0 0) [ 42.853422] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 42.853424] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 42.853425] [drm:intel_crtc_cursor_set], cursor off [ 42.853426] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 42.853427] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 42.853428] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 42.853429] [drm:intel_crtc_cursor_set], cursor off [ 42.853430] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 42.853431] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 42.853432] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:3] [ 42.871331] drm_kms_helper: drm: unregistered panic notifier [ 42.879073] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 42.879075] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C [ 42.879429] [drm:intel_crtc_cursor_set], cursor off [ 42.879431] [drm:intel_crtc_cursor_set], cursor off [ 42.879432] [drm:intel_crtc_cursor_set], cursor off [ 42.880163] BUG: unable to handle kernel NULL pointer dereference at 000000000000004c [ 42.880271] IP: [] drm_unplug_minor+0xd/0x31 [drm] [ 42.880349] PGD 882d0067 PUD 3073067 PMD 0 [ 42.880480] Oops: 0000 [#1] SMP [ 42.880577] Modules linked in: ipv6 dm_mod iTCO_wdt iTCO_vendor_support snd_hda_codec_realtek snd_hda_codec_hdmi serio_raw pcspkr lpc_ich i2c_i801 mfd_core snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore wmi acpi_cpufreq i915(-) video button drm_kms_helper drm freq_table [last unloaded: snd_hda_intel] [ 42.881493] CPU: 4 PID: 3995 Comm: rmmod Not tainted 3.12.0_nightlytop_06653b_20131110_+ #2485 [ 42.881538] Hardware name: ASUS All Series/Z87-EXPERT, BIOS 1008 05/17/2013 [ 42.881580] task: ffff880256713780 ti: ffff8800881f4000 task.ti: ffff8800881f4000 [ 42.881623] RIP: 0010:[] [] drm_unplug_minor+0xd/0x31 [drm] [ 42.881700] RSP: 0018:ffff8800881f5e18 EFLAGS: 00010286 [ 42.881787] RAX: 0000000000000000 RBX: ffff880251d979c0 RCX: ffffffffa00284d2 [ 42.881877] RDX: ffffffffa001d350 RSI: ffffffffa00283de RDI: ffff880251d979c0 [ 42.881968] RBP: ffff88025631d000 R08: 0000000000000040 R09: 00000000000143e0 [ 42.882058] R10: dead000000100100 R11: dead000000100100 R12: ffff88025631d0f8 [ 42.882148] R13: 0000000002081010 R14: 0000000000000000 R15: 0000000002081090 [ 42.882239] FS: 00007fb70f77a740(0000) GS:ffff88025fb00000(0000) knlGS:0000000000000000 [ 42.882379] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.882467] CR2: 000000000000004c CR3: 00000000882cd000 CR4: 00000000001407e0 [ 42.882557] Stack: [ 42.882638] ffff880251d979c0 ffffffffa000996a ffff880251500000 ffffffffa0009985 [ 42.882895] ffff88025631d098 ffffffff812eb020 ffff88025631d098 ffff88025631d098 [ 42.883153] ffffffffa00de0e8 ffffffff8136d1df ffffea0002205a40 ffff88025631d098 [ 42.883410] Call Trace: [ 42.883496] [] ? drm_put_minor+0x35/0x40 [drm] [ 42.883587] [] ? drm_dev_free+0x10/0x66 [drm] [ 42.883677] [] ? pci_device_remove+0x24/0x48 [ 42.883768] [] ? __device_release_driver+0x68/0xc1 [ 42.883858] [] ? driver_detach+0x6e/0x99 [ 42.883946] [] ? bus_remove_driver+0x78/0xb9 [ 42.884035] [] ? pci_unregister_driver+0x17/0x75 [ 42.884127] [] ? drm_pci_exit+0x3b/0x72 [drm] [ 42.884217] [] ? SyS_delete_module+0x1a3/0x219 [ 42.884307] [] ? task_work_run+0x78/0x89 [ 42.884396] [] ? page_fault+0x22/0x30 [ 42.884484] [] ? system_call_fastpath+0x16/0x1b [ 42.884573] Code: 18 be 2f 00 00 00 48 c7 c7 a4 83 02 a0 e8 7a 99 02 e1 c6 05 be 36 02 00 01 48 89 d8 5b c3 48 85 ff 53 48 89 fb 74 26 48 8b 47 10 40 4c 02 74 1c e8 63 d3 00 00 48 89 df e8 4c 2d 00 00 8b 33 [ 42.886706] RIP [] drm_unplug_minor+0xd/0x31 [drm] [ 42.886827] RSP [ 42.886911] CR2: 000000000000004c [ 42.887000] ---[ end trace 04d77421c25f93bf ]---