[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002045000) (16MB) [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002045000-0x0000000020000000) (479MB) [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB) [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020100000-0x000000003f86c000) (503MB) [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000003f86c000-0x0000000040000000) (7MB) [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000040000000-0x0000000052343000) (291MB) [ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x0000000052343000-0x0000000070000000) (476MB) [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x0000000070000000-0x0000000070020000) (0MB) [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x0000000070020000-0x0000000077167000) (113MB) [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x0000000077167000-0x0000000077168000) (0MB) [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x0000000077168000-0x0000000077246000) (0MB) [ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x0000000077246000-0x000000007816e000) (15MB) [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x000000007816e000-0x0000000078723000) (5MB) [ 0.000000] efi: mem22: type=3, attr=0xf, range=[0x0000000078723000-0x000000007896e000) (2MB) [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x000000007896e000-0x0000000078a6d000) (0MB) [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x0000000078a6d000-0x0000000078a6e000) (0MB) [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x0000000078a6e000-0x0000000078a8b000) (0MB) [ 0.000000] efi: mem26: type=1, attr=0xf, range=[0x0000000078a8b000-0x0000000078b6e000) (0MB) [ 0.000000] efi: mem27: type=6, attr=0x800000000000000f, range=[0x0000000078b6e000-0x0000000078c6e000) (1MB) [ 0.000000] efi: mem28: type=5, attr=0x800000000000000f, range=[0x0000000078c6e000-0x0000000078e6e000) (2MB) [ 0.000000] efi: mem29: type=0, attr=0xf, range=[0x0000000078e6e000-0x000000007946e000) (6MB) [ 0.000000] efi: mem30: type=10, attr=0xf, range=[0x000000007946e000-0x000000007956e000) (1MB) [ 0.000000] efi: mem31: type=9, attr=0xf, range=[0x000000007956e000-0x00000000795ae000) (0MB) [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000795ae000-0x000000007a000000) (10MB) [ 0.000000] efi: mem33: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) [ 0.000000] efi: mem34: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Intel Corp. VALLEYVIEW B3 PLATFORM/NOTEBOOK, BIOS BBAYCRB1.X64.0068.R30.1311051945 BBAY_X64_R_V68_30 11/05/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFD00000 mask FFFD00000 write-protect [ 0.000000] 1 base 000000000 mask FC0000000 write-back [ 0.000000] 2 base 040000000 mask FE0000000 write-back [ 0.000000] 3 base 060000000 mask FF0000000 write-back [ 0.000000] 4 base 070000000 mask FF8000000 write-back [ 0.000000] 5 base 078000000 mask FFC000000 write-back [ 0.000000] 6 base 07B000000 mask FFF000000 uncachable [ 0.000000] 7 base 07AE00000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01cac000, 0x01cacfff] PGTABLE [ 0.000000] BRK [0x01cad000, 0x01cadfff] PGTABLE [ 0.000000] BRK [0x01cae000, 0x01caefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x78400000-0x785fffff] [ 0.000000] [mem 0x78400000-0x785fffff] page 2M [ 0.000000] BRK [0x01caf000, 0x01caffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x78000000-0x783fffff] [ 0.000000] [mem 0x78000000-0x783fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff] [ 0.000000] [mem 0x20100000-0x201fffff] page 4k [ 0.000000] [mem 0x20200000-0x77ffffff] page 2M [ 0.000000] BRK [0x01cb0000, 0x01cb0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x78600000-0x78b6dfff] [ 0.000000] [mem 0x78600000-0x789fffff] page 2M [ 0.000000] [mem 0x78a00000-0x78b6dfff] page 4k [ 0.000000] BRK [0x01cb1000, 0x01cb1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x795ae000-0x79ffffff] [ 0.000000] [mem 0x795ae000-0x795fffff] page 4k [ 0.000000] [mem 0x79600000-0x79ffffff] page 2M [ 0.000000] RAMDISK: [mem 0x3f86c000-0x3fffafff] [ 0.000000] ACPI: RSDP 00000000795ad014 00024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 00000000795ac0e8 00084 (v01 INTEL EDK2 00000003 01000013) [ 0.000000] ACPI: FACP 00000000795aa000 0010C (v05 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: DSDT 000000007959b000 0AF15 (v02 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: FACS 000000007950d000 00040 [ 0.000000] ACPI: SSDT 00000000795ab000 000B1 (v01 Intel_ ADebTabl 00001000 INTL 20120518) [ 0.000000] ACPI: UEFI 0000000079516000 00042 (v01 00000000 00000000) [ 0.000000] ACPI: HPET 00000000795a9000 00038 (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: LPIT 00000000795a8000 00104 (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: APIC 00000000795a7000 00084 (v03 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: MCFG 00000000795a6000 0003C (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0000000079595000 00763 (v01 PmRef CpuPm 00003000 INTL 20120518) [ 0.000000] ACPI: SSDT 0000000079594000 00290 (v01 PmRef Cpu0Tst 00003000 INTL 20120518) [ 0.000000] ACPI: SSDT 0000000079593000 0017A (v01 PmRef ApTst 00003000 INTL 20120518) [ 0.000000] ACPI: SSDT 0000000079592000 003E6 (v01 Intel_ IsctTabl 00001000 INTL 20120518) [ 0.000000] ACPI: FPDT 0000000079591000 00044 (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x79ffffff] [ 0.000000] NODE_DATA [mem 0x78b69000-0x78b6cfff] [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880074c00000-ffff880076bfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008efff] [ 0.000000] node 0: [mem 0x00090000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20100000-0x78b6dfff] [ 0.000000] node 0: [mem 0x795ae000-0x79ffffff] [ 0.000000] On node 0 totalpages: 496734 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 90 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7744 pages used for memmap [ 0.000000] DMA32 zone: 492736 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 103 [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x78b6e000-0x7946dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7946e000-0x7956dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7956e000-0x795adfff] [ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880078400000 s74304 r8192 d24000 u524288 [ 0.000000] pcpu-alloc: s74304 r8192 d24000 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 488836 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.12.0_drm-intel-fixes_f727b4_20131121_+ root=UUID=a54784e1-b39c-41f0-aab7-c0e8f906e348 ro rd.md=0 rd.lvm=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rhgb quiet i915.i915_enable_rc6=1 drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1903956K/1986936K available (7241K kernel code, 699K rwdata, 3524K rodata, 872K init, 584K bss, 82980K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2166.668 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4333.33 BogoMIPS (lpj=2166668) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000029] init_memory_mapping: [mem 0x78b6e000-0x78c6dfff] [ 0.000033] [mem 0x78b6e000-0x78c6dfff] page 4k [ 0.000050] init_memory_mapping: [mem 0x78c6e000-0x78e6dfff] [ 0.000052] [mem 0x78c6e000-0x78e6dfff] page 4k [ 0.000420] Security Framework initialized [ 0.000627] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001495] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001919] Mount-cache hash table entries: 256 [ 0.002203] CPU: Physical Processor ID: 0 [ 0.002207] CPU: Processor Core ID: 0 [ 0.002212] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.007009] mce: CPU supports 6 MCE banks [ 0.007019] CPU0: Thermal monitoring enabled (TM1) [ 0.007027] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0 tlb_flushall_shift: 6 [ 0.007161] Freeing SMP alternatives memory: 32K (ffffffff81c10000 - ffffffff81c18000) [ 0.007165] ACPI: Core revision 20130725 [ 0.018282] ACPI: All ACPI Tables successfully acquired [ 0.020844] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.030858] smpboot: CPU0: Intel(R) Pentium(R) CPU N3520 @ 2.16GHz (fam: 06, model: 37, stepping: 03) [ 0.030870] TSC deadline timer enabled [ 0.030883] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.030894] ... version: 3 [ 0.030896] ... bit width: 40 [ 0.030898] ... generic registers: 2 [ 0.030900] ... value mask: 000000ffffffffff [ 0.030902] ... max period: 000000ffffffffff [ 0.030904] ... fixed-purpose events: 3 [ 0.030906] ... event mask: 0000000700000003 [ 0.031211] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK [ 0.085089] Brought up 4 CPUs [ 0.085094] smpboot: Total of 4 processors activated (17333.34 BogoMIPS) [ 0.085814] devtmpfs: initialized [ 0.086499] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.086504] PM: Registering ACPI NVS region [mem 0x7946e000-0x7956dfff] (1048576 bytes) [ 0.086702] xor: measuring software checksum speed [ 0.096089] prefetch64-sse: 7564.000 MB/sec [ 0.106115] generic_sse: 6728.000 MB/sec [ 0.106118] xor: using function: prefetch64-sse (7564.000 MB/sec) [ 0.106139] RTC time: 16:09:45, date: 08/02/12 [ 0.106199] NET: Registered protocol family 16 [ 0.106982] cpuidle: using governor ladder [ 0.106986] cpuidle: using governor menu [ 0.107248] ACPI: bus type PCI registered [ 0.107456] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.107460] PCI: not using MMCONFIG [ 0.107463] PCI: Using configuration type 1 for base access [ 0.126456] bio: create slab at 0 [ 0.143285] raid6: sse2x1 566 MB/s [ 0.160358] raid6: sse2x2 730 MB/s [ 0.177393] raid6: sse2x4 1285 MB/s [ 0.177396] raid6: using algorithm sse2x4 (1285 MB/s) [ 0.177398] raid6: using ssse3x2 recovery algorithm [ 0.177505] ACPI: Added _OSI(Module Device) [ 0.177509] ACPI: Added _OSI(Processor Device) [ 0.177511] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.177513] ACPI: Added _OSI(Processor Aggregator Device) [ 0.180362] ACPI: EC: Look up EC in DSDT [ 0.198150] ACPI: SSDT 0000000079466a18 0045B (v01 PmRef Cpu0Ist 00003000 INTL 20120518) [ 0.198858] ACPI: Dynamic OEM Table Load: [ 0.198862] ACPI: SSDT (null) 0045B (v01 PmRef Cpu0Ist 00003000 INTL 20120518) [ 0.199030] ACPI: SSDT 0000000079465918 00433 (v01 PmRef Cpu0Cst 00003001 INTL 20120518) [ 0.199726] ACPI: Dynamic OEM Table Load: [ 0.199730] ACPI: SSDT (null) 00433 (v01 PmRef Cpu0Cst 00003001 INTL 20120518) [ 0.205874] ACPI: SSDT 0000000079468e18 0015F (v01 PmRef ApIst 00003000 INTL 20120518) [ 0.206611] ACPI: Dynamic OEM Table Load: [ 0.206615] ACPI: SSDT (null) 0015F (v01 PmRef ApIst 00003000 INTL 20120518) [ 0.209621] ACPI: SSDT 0000000079467f18 0008D (v01 PmRef ApCst 00003000 INTL 20120518) [ 0.210319] ACPI: Dynamic OEM Table Load: [ 0.210323] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20120518) [ 0.415579] ACPI: Interpreter enabled [ 0.415591] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.415599] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.415623] ACPI: (supports S0 S3 S4 S5) [ 0.415626] ACPI: Using IOAPIC for interrupt routing [ 0.415664] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.416351] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources [ 0.421581] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.421884] ACPI: No dock devices found. [ 0.436153] ACPI: Power Resource [USBC] (on) [ 0.440448] ACPI: Power Resource [FN00] (off) [ 0.441429] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.441503] \_SB_.PCI0:_OSC invalid UUID [ 0.441506] _OSC request data:1 8 0 [ 0.441576] \_SB_.PCI0:_OSC invalid UUID [ 0.441579] _OSC request data:1 1f 0 [ 0.441586] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.441590] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.442024] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.442105] PCI host bridge to bus 0000:00 [ 0.442111] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.442115] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.442119] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.442123] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.442127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.442131] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.442135] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.442139] pci_bus 0000:00: root bus resource [mem 0x90800000-0x90bfffff] [ 0.442142] pci_bus 0000:00: root bus resource [mem 0x80000000-0x906ffffe] [ 0.442155] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.442325] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.442341] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff] [ 0.442353] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 0.442365] pci 0000:00:02.0: reg 0x20: [io 0x1050-0x1057] [ 0.442547] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.442570] pci 0000:00:13.0: reg 0x10: [io 0x1048-0x104f] [ 0.442580] pci 0000:00:13.0: reg 0x14: [io 0x105c-0x105f] [ 0.442591] pci 0000:00:13.0: reg 0x18: [io 0x1040-0x1047] [ 0.442602] pci 0000:00:13.0: reg 0x1c: [io 0x1058-0x105b] [ 0.442612] pci 0000:00:13.0: reg 0x20: [io 0x1020-0x103f] [ 0.442623] pci 0000:00:13.0: reg 0x24: [mem 0x90617000-0x906177ff] [ 0.442670] pci 0000:00:13.0: PME# supported from D3hot [ 0.442818] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.442839] pci 0000:00:14.0: reg 0x10: [mem 0x90600000-0x9060ffff 64bit] [ 0.442897] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.442962] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.443065] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.443093] pci 0000:00:1a.0: reg 0x10: [mem 0x90500000-0x905fffff] [ 0.443108] pci 0000:00:1a.0: reg 0x14: [mem 0x90400000-0x904fffff] [ 0.443220] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.443378] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.443403] pci 0000:00:1b.0: reg 0x10: [mem 0x90610000-0x90613fff 64bit] [ 0.443473] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.443618] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.443678] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.443753] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.443843] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.443902] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.443968] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.444067] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.444125] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.444199] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.444293] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.444352] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.444418] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.444513] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.444719] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.444756] pci 0000:00:1f.3: reg 0x10: [mem 0x90614000-0x9061401f] [ 0.444828] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f] [ 0.445136] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.445250] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.445346] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.445442] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.446362] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.446473] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.446583] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.446693] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.446802] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.446912] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.447021] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.447130] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.449233] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.449248] ACPI: \_SB_.PCI0: notify handler is installed [ 0.449350] Found 1 acpi root devices [ 0.449408] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.449742] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.449752] vgaarb: loaded [ 0.449754] vgaarb: bridge control possible 0000:00:02.0 [ 0.450028] SCSI subsystem initialized [ 0.450222] libata version 3.00 loaded. [ 0.450423] ACPI: bus type USB registered [ 0.450546] usbcore: registered new interface driver usbfs [ 0.450605] usbcore: registered new interface driver hub [ 0.450683] usbcore: registered new device driver usb [ 0.450885] pps_core: LinuxPPS API ver. 1 registered [ 0.450888] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.450940] PTP clock support registered [ 0.451211] PCI: Using ACPI for IRQ routing [ 0.452576] PCI: pci_cache_line_size set to 64 bytes [ 0.452614] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.452618] e820: reserve RAM buffer [mem 0x78b6e000-0x7bffffff] [ 0.452621] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.452928] NetLabel: Initializing [ 0.452932] NetLabel: domain hash size = 128 [ 0.452934] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.452948] NetLabel: unlabeled traffic allowed by default [ 0.453216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.453223] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.455263] Switched to clocksource hpet [ 0.455380] pnp: PnP ACPI init [ 0.455391] ACPI: bus type PNP registered [ 0.455508] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.455656] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.455870] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.455999] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.456004] system 00:03: [io 0x0400-0x047f] has been reserved [ 0.456009] system 00:03: [io 0x0500-0x05fe] has been reserved [ 0.456013] system 00:03: [io 0x0600-0x061f] has been reserved [ 0.456018] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.456023] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.456215] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.456430] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.456566] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.456982] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.456988] system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.456992] system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.456997] system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.457001] system 00:07: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.457005] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.457010] system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.457014] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.457018] system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.457024] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.458817] pnp 00:08: Plug and Play ACPI device, IDs INT33bd (active) [ 0.458861] pnp: PnP ACPI: found 9 devices [ 0.458864] ACPI: bus type PNP unregistered [ 0.471130] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.471137] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.471142] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.471152] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.471157] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.471162] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.471171] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.471175] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.471180] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 [ 0.471189] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.471199] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 [ 0.471204] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 [ 0.471215] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.471219] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.471224] pci 0000:00:1c.1: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.471228] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.471232] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.471237] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.471241] pci 0000:00:1c.3: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.471246] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.471250] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.471254] pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.471258] pci 0000:00:1c.2: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.471262] pci 0000:00:1c.3: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.471271] pci 0000:00:1c.0: BAR 8: assigned [mem 0x90800000-0x909fffff] [ 0.471292] pci 0000:00:1c.0: BAR 9: assigned [mem 0x90a00000-0x90bfffff 64bit pref] [ 0.471299] pci 0000:00:1c.1: BAR 8: can't assign mem (size 0x200000) [ 0.471306] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000) [ 0.471312] pci 0000:00:1c.2: BAR 8: can't assign mem (size 0x200000) [ 0.471318] pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x200000) [ 0.471324] pci 0000:00:1c.3: BAR 8: can't assign mem (size 0x200000) [ 0.471330] pci 0000:00:1c.3: BAR 9: can't assign mem pref (size 0x200000) [ 0.471337] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] [ 0.471343] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] [ 0.471348] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff] [ 0.471354] pci 0000:00:1c.3: BAR 7: assigned [io 0x5000-0x5fff] [ 0.471362] pci 0000:00:1c.3: BAR 8: assigned [mem 0x90800000-0x909fffff] [ 0.471368] pci 0000:00:1c.3: BAR 9: assigned [mem 0x90a00000-0x90bfffff 64bit pref] [ 0.471374] pci 0000:00:1c.2: BAR 8: can't assign mem (size 0x200000) [ 0.471381] pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x200000) [ 0.471386] pci 0000:00:1c.1: BAR 8: can't assign mem (size 0x200000) [ 0.471393] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000) [ 0.471398] pci 0000:00:1c.0: BAR 8: can't assign mem (size 0x200000) [ 0.471405] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000) [ 0.471409] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.471414] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.471425] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.471430] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.471440] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.471444] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.471454] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.471459] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.471465] pci 0000:00:1c.3: bridge window [mem 0x90800000-0x909fffff] [ 0.471470] pci 0000:00:1c.3: bridge window [mem 0x90a00000-0x90bfffff 64bit pref] [ 0.471478] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 0.471482] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 0.471485] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 0.471489] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.471493] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 0.471497] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 0.471501] pci_bus 0000:00: resource 10 [mem 0x90800000-0x90bfffff] [ 0.471505] pci_bus 0000:00: resource 11 [mem 0x80000000-0x906ffffe] [ 0.471509] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.471513] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.471517] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.471521] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff] [ 0.471525] pci_bus 0000:04: resource 1 [mem 0x90800000-0x909fffff] [ 0.471529] pci_bus 0000:04: resource 2 [mem 0x90a00000-0x90bfffff 64bit pref] [ 0.471579] NET: Registered protocol family 2 [ 0.471836] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.471940] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.472015] TCP: Hash tables configured (established 16384 bind 16384) [ 0.472058] TCP: reno registered [ 0.472069] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.472090] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.472189] NET: Registered protocol family 1 [ 0.472341] RPC: Registered named UNIX socket transport module. [ 0.472345] RPC: Registered udp transport module. [ 0.472347] RPC: Registered tcp transport module. [ 0.472349] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.472365] pci 0000:00:02.0: Boot video device [ 0.472660] PCI: CLS 0 bytes, default 64 [ 0.472723] Trying to unpack rootfs image as initramfs... [ 0.672363] Freeing initrd memory: 7740K (ffff88003f86c000 - ffff88003fffb000) [ 0.674773] audit: initializing netlink socket (disabled) [ 0.674790] type=2000 audit(1343923784.668:1): initialized [ 0.710951] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.716533] VFS: Disk quotas dquot_6.5.2 [ 0.716659] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.719000] NFS: Registering the id_resolver key type [ 0.719021] Key type id_resolver registered [ 0.719023] Key type id_legacy registered [ 0.719029] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.719452] fuse init (API version 7.22) [ 0.720381] bio: create slab at 1 [ 0.720904] Btrfs loaded [ 0.720915] msgmni has been set to 3790 [ 0.721532] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.721536] io scheduler noop registered [ 0.721539] io scheduler deadline registered [ 0.721638] io scheduler cfq registered (default) [ 0.722412] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.722641] efifb: probing for efifb [ 0.723556] efifb: framebuffer at 0x80000000, mapped to 0xffffc90004480000, using 8100k, total 8100k [ 0.723559] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.723561] efifb: scrolling: redraw [ 0.723564] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.738331] Console: switching to colour frame buffer device 240x67 [ 0.751957] fb0: EFI VGA frame buffer device [ 0.752171] ACPI: Fan [FAN0] (off) [ 0.752299] ACPI: Requesting acpi_cpufreq [ 0.754360] Monitor-Mwait will be used to enter C-1 state [ 0.754374] Monitor-Mwait will be used to enter C-3 state [ 0.754392] ACPI: acpi_idle registered with cpuidle [ 0.757032] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.757037] ACPI: Thermal Zone [TZ01] (27 C) [ 0.757242] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.777547] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.779618] Non-volatile memory driver v1.3 [ 0.779623] Linux agpgart interface v0.103 [ 0.784083] brd: module loaded [ 0.784792] Loading iSCSI transport class v2.0-870. [ 0.786053] iscsi: registered transport (tcp) [ 0.786388] Adaptec aacraid driver 1.2-0[30200]-ms [ 0.786504] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.786895] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k. [ 0.787067] iscsi: registered transport (qla4xxx) [ 0.787158] QLogic iSCSI HBA Driver [ 0.787328] DC390: clustering now enabled by default. If you get problems load [ 0.787331] with "disable_clustering=1" and report to maintainers [ 0.787496] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.787761] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.787844] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.788030] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.788189] osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.788689] SCSI Media Changer driver v0.25 [ 0.788859] ahci 0000:00:13.0: version 3.0 [ 0.789046] ahci 0000:00:13.0: irq 103 for MSI/MSI-X [ 0.799576] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.799582] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds [ 0.799588] ahci 0000:00:13.0: setting latency timer to 64 [ 0.800370] scsi0 : ahci [ 0.800643] scsi1 : ahci [ 0.800827] ata1: SATA max UDMA/133 abar m2048@0x90617000 port 0x90617100 irq 103 [ 0.800832] ata2: SATA max UDMA/133 abar m2048@0x90617000 port 0x90617180 irq 103 [ 0.805729] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013) [ 0.805790] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11) [ 0.806012] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.806015] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.806106] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.806109] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.806198] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.806201] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 0.806289] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 0.806292] igb: Copyright (c) 2007-2013 Intel Corporation. [ 0.806469] usbcore: registered new interface driver zd1201 [ 0.806554] usbcore: registered new interface driver catc [ 0.806635] usbcore: registered new interface driver kaweth [ 0.806639] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.806719] usbcore: registered new interface driver pegasus [ 0.806798] usbcore: registered new interface driver rtl8150 [ 0.806880] usbcore: registered new interface driver asix [ 0.806965] usbcore: registered new interface driver ax88179_178a [ 0.807046] usbcore: registered new interface driver cdc_ether [ 0.807126] usbcore: registered new interface driver r815x [ 0.807208] usbcore: registered new interface driver dm9601 [ 0.807290] usbcore: registered new interface driver gl620a [ 0.807370] usbcore: registered new interface driver net1080 [ 0.807454] usbcore: registered new interface driver plusb [ 0.807534] usbcore: registered new interface driver rndis_host [ 0.807628] usbcore: registered new interface driver cdc_subset [ 0.807708] usbcore: registered new interface driver zaurus [ 0.807788] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.807885] usbcore: registered new interface driver cdc_ncm [ 0.808274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.808277] ehci-pci: EHCI PCI platform driver [ 0.808440] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.808443] ohci-pci: OHCI PCI platform driver [ 0.808529] uhci_hcd: USB Universal Host Controller Interface driver [ 0.808807] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.808812] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.808945] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.809336] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.809369] xhci_hcd 0000:00:14.0: irq 104 for MSI/MSI-X [ 0.809460] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.809465] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.809469] usb usb1: Product: xHCI Host Controller [ 0.809472] usb usb1: Manufacturer: Linux 3.12.0_drm-intel-fixes_f727b4_20131121_+ xhci_hcd [ 0.809476] usb usb1: SerialNumber: 0000:00:14.0 [ 0.809786] hub 1-0:1.0: USB hub found [ 0.809802] hub 1-0:1.0: 6 ports detected [ 0.810376] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.810503] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.810571] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.810576] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.810579] usb usb2: Product: xHCI Host Controller [ 0.810583] usb usb2: Manufacturer: Linux 3.12.0_drm-intel-fixes_f727b4_20131121_+ xhci_hcd [ 0.810586] usb usb2: SerialNumber: 0000:00:14.0 [ 0.810873] hub 2-0:1.0: USB hub found [ 0.810889] hub 2-0:1.0: 1 port detected [ 0.817764] usbcore: registered new interface driver usb-storage [ 0.817956] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.818362] i8042: Warning: Keylock active [ 0.819644] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.819656] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.819981] mousedev: PS/2 mouse device common for all mice [ 0.820234] rtc_cmos 00:00: RTC can wake from S4 [ 0.820440] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 0.820470] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.820545] i2c /dev entries driver [ 0.820634] EFI Variables Facility v0.08 2004-May-17 [ 0.830563] hidraw: raw HID events driver (C) Jiri Kosina [ 0.832104] usbcore: registered new interface driver usbhid [ 0.832106] usbhid: USB HID core driver [ 0.832355] TCP: cubic registered [ 0.832358] Initializing XFRM netlink socket [ 0.832365] NET: Registered protocol family 17 [ 0.832407] Key type dns_resolver registered [ 0.833546] registered taskstats version 1 [ 0.833851] Magic number: 8:474:185 [ 0.833977] PM: Hibernation image not present or could not be loaded. [ 1.043124] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 1.106231] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.108214] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.117636] ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133 [ 1.117659] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.124524] ata2.00: ATAPI: TSSTcorp CDDVDW SN-S083C, SB01, max UDMA/100 [ 1.124531] ata2.00: applying bridge limits [ 1.127594] ata1.00: configured for UDMA/133 [ 1.128414] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5 [ 1.130522] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.130625] sd 0:0:0:0: [sda] Write Protect is off [ 1.130631] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.130665] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.131595] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.133834] sda: sda1 sda2 sda3 sda4 sda5 [ 1.134694] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.140580] ata2.00: configured for UDMA/100 [ 1.144669] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SN-S083C SB01 PQ: 0 ANSI: 5 [ 1.150285] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.150289] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.151001] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.151806] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.153015] Freeing unused kernel memory: 872K (ffffffff81b36000 - ffffffff81c10000) [ 1.159062] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 1.159238] systemd[1]: Running in initial RAM disk. [ 1.159814] systemd[1]: Failed to insert module 'ipv6' [ 1.159987] systemd[1]: Set hostname to . [ 1.162893] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 1.169768] systemd[1]: Expecting device dev-disk-by\x2duuid-a54784e1\x2db39c\x2d41f0\x2daab7\x2dc0e8f906e348.device... [ 1.169798] systemd[1]: Expecting device dev-disk-by\x2duuid-1a1b79a3\x2d6d33\x2d48d2\x2da27e\x2d1b5805d88291.device... [ 1.169820] systemd[1]: Expecting device dev-disk-by\x2duuid-0a7e090c\x2dd2b9\x2d498e\x2dbc0d\x2d05c33717cb8c.device... [ 1.169873] systemd[1]: Starting Timers. [ 1.169897] systemd[1]: Reached target Timers. [ 1.169923] systemd[1]: Starting Journal Socket. [ 1.170023] systemd[1]: Listening on Journal Socket. [ 1.170342] systemd[1]: Started dracut cmdline hook. [ 1.170681] systemd[1]: Starting dracut pre-udev hook... [ 1.171689] systemd[1]: Started Load Kernel Modules. [ 1.171723] systemd[1]: Starting Setup Virtual Console... [ 1.172422] systemd[1]: Starting Journal Service... [ 1.173161] systemd[1]: Started Journal Service. [ 1.175206] systemd[1]: Starting udev Kernel Socket. [ 1.175275] systemd[1]: Listening on udev Kernel Socket. [ 1.175367] systemd[1]: Starting udev Control Socket. [ 1.175427] systemd[1]: Listening on udev Control Socket. [ 1.175450] systemd[1]: Starting Sockets. [ 1.175476] systemd[1]: Reached target Sockets. [ 1.175499] systemd[1]: Starting Swap. [ 1.175521] systemd[1]: Reached target Swap. [ 1.175544] systemd[1]: Starting Local File Systems. [ 1.175566] systemd[1]: Reached target Local File Systems. [ 1.182455] usb 1-1: New USB device found, idVendor=03f0, idProduct=0024 [ 1.182458] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.182460] usb 1-1: Product: HP Basic USB Keyboard [ 1.182463] usb 1-1: Manufacturer: CHICONY [ 1.184842] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.190379] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input1 [ 1.190596] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-1/input0 [ 1.228052] systemd-udevd[1187]: starting version 204 [ 1.283350] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.283989] ACPI: Lid Switch [LID0] [ 1.284799] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 1.284972] ACPI: Power Button [PWRB] [ 1.286356] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 1.286862] ACPI: Sleep Button [SLPB] [ 1.287089] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 1.287504] ACPI: Power Button [PWRF] [ 1.297980] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 1.298993] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.300836] [drm] Initialized drm 1.1.0 20060810 [ 1.309186] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0f31 flags=is_mobile,need_gfx_hws,is_valleyview,has_hotplug, [ 1.309439] [drm:intel_detect_pch], [ 1.309442] No PCH found? [ 1.309716] [drm] Memory usable by graphics device = 2048M [ 1.309719] [drm:i915_gem_gtt_init], GMADR size = 256M [ 1.309722] [drm:i915_gem_gtt_init], GTT stolen size = 64M [ 1.309727] checking generic (80000000 7e9000) vs hw (80000000 10000000) [ 1.309730] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver [ 1.309752] Console: switching to colour dummy device 80x25 [ 1.310086] i915 0000:00:02.0: setting latency timer to 64 [ 1.343039] usb 1-2: new low-speed USB device number 3 using xhci_hcd [ 1.349524] [drm:intel_opregion_setup], graphic opregion physical addr: 0x79568018 [ 1.349548] [drm:intel_opregion_setup], Public ACPI methods supported [ 1.349551] [drm:intel_opregion_setup], ASLE supported [ 1.349673] i915 0000:00:02.0: irq 105 for MSI/MSI-X [ 1.349688] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.349691] [drm] Driver supports precise vblank timestamp query. [ 1.349694] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 1.349699] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT VALLEYVIEW [ 1.349702] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.349706] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 1.349712] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.349715] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.349720] [drm:parse_lfp_panel_data], VBT initial LVDS value 0 [ 1.349724] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.349762] [drm:parse_mipi], No MIPI BDB found [ 1.349772] [drm:intel_dsm_pci_probe], [ 1.349775] no _DSM method for intel device [ 1.349783] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at 7b000000 [ 1.349861] [drm:intel_modeset_init], 2 display pipes available. [ 1.349930] [drm:intel_shared_dpll_init], 0 shared PLLs initialized [ 1.349938] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.351937] [drm:intel_dp_init_connector], Adding DP connector on port B [ 1.352752] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 1.355117] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 1.355170] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.357536] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064 [ 1.357583] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.357712] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a [ 1.357717] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.357722] usb 1-2: Product: USB Optical Mouse [ 1.357725] usb 1-2: Manufacturer: Logitech [ 1.358047] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.359173] [drm:intel_dp_init_connector], Adding eDP connector on port C [ 1.359383] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 1.359391] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 1.359397] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d [ 1.359526] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 1.359700] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 1.359709] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 1.359714] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0005 [ 1.360023] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 1.360032] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.360035] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.360039] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 1.360046] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 1.360052] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d [ 1.360364] [drm:intel_dp_get_dpcd], DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 1.360514] [drm:intel_dp_get_dpcd], Detected EDP PSR Panel. [ 1.360521] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f06 [ 1.361248] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.361512] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input7 [ 1.361999] hid-generic 0003:046D:C05A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0 [ 1.383733] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.383751] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 1.383758] [drm:intel_panel_get_backlight], get backlight PWM = 7812 [ 1.383762] [drm:intel_panel_get_max_backlight], max backlight PWM = 7812 [ 1.383935] [drm:intel_dsi_init], [ 1.383941] [drm:intel_dsi_init], no device found [ 1.383950] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000] [ 1.386208] [drm:init_status_page], render ring hws offset: 0x00001000 [ 1.386214] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.386218] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072 [ 1.388515] [drm:init_pipe_control], render ring pipe control offset: 0x00024000 [ 1.388537] [drm:init_status_page], bsd ring hws offset: 0x00025000 [ 1.388541] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.388545] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072 [ 1.388593] [drm:init_status_page], blitter ring hws offset: 0x00048000 [ 1.388597] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.388600] [drm:i915_pages_create_for_stolen], offset=0x40000, size=131072 [ 1.388649] [drm:create_default_context], Default HW context loaded [ 1.388652] [drm:i915_gem_context_init], HW context support initialized [ 1.390048] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 1.390054] [drm:intel_modeset_readout_hw_state], [CRTC:6] hw state readout: disabled [ 1.390059] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe A [ 1.390063] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe A [ 1.390068] [drm:intel_modeset_readout_hw_state], [ENCODER:15:TMDS-15] hw state readout: disabled, pipe A [ 1.390072] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A [ 1.390079] [drm:intel_dp_get_config], pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 1.390082] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: enabled, pipe A [ 1.390087] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:eDP-1] hw state readout: enabled [ 1.390091] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled [ 1.390095] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:HDMI-A-1] hw state readout: disabled [ 1.390099] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:DP-1] hw state readout: disabled [ 1.390103] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: disabled [ 1.390108] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 1.390112] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.390114] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.390117] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.390121] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.390124] [drm:intel_dump_pipe_config], requested mode: [ 1.390127] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 1.390132] [drm:intel_dump_pipe_config], adjusted mode: [ 1.390134] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.390139] [drm:intel_dump_crtc_timings], crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 1.390143] [drm:intel_dump_pipe_config], port clock: 270000 [ 1.390146] [drm:intel_dump_pipe_config], pipe src size: 1920x1080 [ 1.390148] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.390152] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.390155] [drm:intel_dump_pipe_config], ips: 0 [ 1.390157] [drm:intel_dump_pipe_config], double wide: 0 [ 1.390161] [drm:intel_dump_pipe_config], [CRTC:6][setup_hw_state] config for pipe B [ 1.390163] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.390166] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.390169] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.390172] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.390176] [drm:intel_dump_pipe_config], requested mode: [ 1.390178] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.390182] [drm:intel_dump_pipe_config], adjusted mode: [ 1.390185] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.390189] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.390193] [drm:intel_dump_pipe_config], port clock: 0 [ 1.390195] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 1.390198] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.390201] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.390204] [drm:intel_dump_pipe_config], ips: 0 [ 1.390207] [drm:intel_dump_pipe_config], double wide: 0 [ 1.390211] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 1.390216] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 1.390220] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 1.390223] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 1.390227] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 1.390230] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 1.390234] [drm:check_crtc_state], [CRTC:3] [ 1.392062] [drm:check_crtc_state], [CRTC:6] [ 1.392072] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 1.392086] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] [ 1.392090] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 1.392255] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 1.392410] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 1.392426] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 1.392432] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes : [ 1.392436] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.392444] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 1.392447] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 1.392451] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 1.398072] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 1.398079] [drm:intel_crt_detect], CRT not detected via hotplug [ 1.398239] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 1.398246] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.398250] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 1.398252] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 1.398528] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.398531] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 1.398534] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 1.398538] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 1.398543] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 1.398547] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 1.398695] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.398699] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 1.398703] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 1.398707] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 1.398710] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 1.398714] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 1.398717] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 1.398721] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 1.398868] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.398872] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.398876] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 1.398880] [drm:drm_setup_crtcs], [ 1.398884] [drm:drm_enable_connectors], connector 20 enabled? yes [ 1.398886] [drm:drm_enable_connectors], connector 9 enabled? no [ 1.398889] [drm:drm_enable_connectors], connector 12 enabled? no [ 1.398892] [drm:drm_enable_connectors], connector 16 enabled? no [ 1.398895] [drm:drm_enable_connectors], connector 18 enabled? no [ 1.398898] [drm:drm_target_preferred], looking for cmdline mode on connector 20 [ 1.398901] [drm:drm_target_preferred], looking for preferred mode on connector 20 [ 1.398904] [drm:drm_target_preferred], found mode 1920x1080 [ 1.398906] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 1.398911] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3 [ 1.398918] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000 [ 1.398929] [drm:i915_pages_create_for_stolen], offset=0x60000, size=8294400 [ 1.403345] [drm:intelfb_create], allocated 1920x1080 fb: 0x00073000, bo ffff88003fbea000 [ 1.403588] fbcon: inteldrmfb (fb0) is primary device [ 1.403761] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 1.403765] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 1.403767] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 1.403771] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.403775] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.403777] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 [ 1.403781] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 1.403785] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.403789] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains [ 1.403794] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 1.403805] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.403807] [drm:intel_dp_compute_config], DP link bw required 333072 available 432000 [ 1.403810] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.403813] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 1.403814] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.403816] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.403818] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.403821] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.403822] [drm:intel_dump_pipe_config], requested mode: [ 1.403826] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.403827] [drm:intel_dump_pipe_config], adjusted mode: [ 1.403831] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.403834] [drm:intel_dump_crtc_timings], crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 1.403835] [drm:intel_dump_pipe_config], port clock: 270000 [ 1.403837] [drm:intel_dump_pipe_config], pipe src size: 1920x1080 [ 1.403839] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.403841] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.403843] [drm:intel_dump_pipe_config], ips: 0 [ 1.403844] [drm:intel_dump_pipe_config], double wide: 0 [ 1.403849] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 1.403852] [drm:ironlake_edp_backlight_off], [ 1.408584] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 1.515281] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 1.526495] usb 1-6: New USB device found, idVendor=0424, idProduct=2640 [ 1.526498] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.527726] hub 1-6:1.0: USB hub found [ 1.527753] hub 1-6:1.0: 3 ports detected [ 1.604950] [drm:ironlake_edp_panel_off], Turn eDP power off [ 1.604960] [drm:ironlake_wait_panel_off], Wait for panel power off time [ 1.604976] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status c0000008 control abcd0000 [ 1.675398] tsc: Refined TSC clocksource calibration: 2166.666 MHz [ 1.759056] [drm:valleyview_irq_handler], hotplug event received, stat 0x00100000 [ 1.759066] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 0 [ 1.801850] usb 1-6.1: new high-speed USB device number 5 using xhci_hcd [ 1.821948] usb 1-6.1: New USB device found, idVendor=0424, idProduct=4040 [ 1.821961] usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.821971] usb 1-6.1: Product: Ultra Fast Media Reader [ 1.821979] usb 1-6.1: Manufacturer: Generic [ 1.821987] usb 1-6.1: SerialNumber: 000000264001 [ 1.824303] usb-storage 1-6.1:1.0: USB Mass Storage device detected [ 1.824783] scsi2 : usb-storage 1-6.1:1.0 [ 1.897952] usb 1-6.2: new high-speed USB device number 6 using xhci_hcd [ 1.935673] usb 1-6.2: New USB device found, idVendor=0b95, idProduct=7720 [ 1.935686] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.935696] usb 1-6.2: Product: AX88772 [ 1.935704] usb 1-6.2: SerialNumber: 006B04 [ 2.129640] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 2.135644] [drm:intel_dp_link_down], [ 2.187686] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 2.238734] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 2.242975] asix 1-6.2:1.0 eth0: register 'asix' at usb-0000:00:14.0-6.2, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:b1:d9:50 [ 2.260763] [drm:i9xx_update_plane], Writing base 00073000 00000000 0 0 7680 [ 2.260767] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 2.260772] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080] [ 2.278761] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 2.278763] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 2.278766] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.278767] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 2.278772] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f06 [ 2.278775] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 2.278777] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 2.278780] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000 [ 2.278784] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 2.278786] [drm:ironlake_edp_panel_vdd_on], eDP was not running [ 2.308440] [drm:valleyview_irq_handler], hotplug event received, stat 0x10100000 [ 2.308443] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 1 [ 2.493933] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.507946] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.508376] [drm:intel_dp_start_link_train], clock recovery OK [ 2.508378] [drm:ironlake_edp_panel_on], Turn eDP power on [ 2.508380] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 2.508383] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008 [ 2.508386] [drm:ironlake_wait_panel_on], Wait for panel power on [ 2.508389] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b [ 2.629157] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 2.629161] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 2.676760] Switched to clocksource tsc [ 2.681018] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful [ 2.681197] [drm:g4x_check_srwm], SR watermark: display plane 107, cursor 6 [ 2.681199] [drm:g4x_check_srwm], SR watermark: display plane 211, cursor 10 [ 2.681202] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=2, cursor=2, SR: plane=107, cursor=10 [ 2.702111] [drm:valleyview_enable_rps], GT fifo had a previous error 10 [ 2.702115] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000 [ 2.702119] [drm:i915_pages_create_for_stolen], offset=0x3efa000, size=24576 [ 2.702127] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 2.704100] [drm:valleyview_enable_rps], DDR speed: 1333 MHz [ 2.704101] [drm:valleyview_enable_rps], GPLL enabled? yes [ 2.704103] [drm:valleyview_enable_rps], GPU status: 0x0000c6d0 [ 2.704105] [drm:valleyview_enable_rps], current GPU freq: 314 MHz (198) [ 2.706103] [drm:valleyview_enable_rps], max GPU freq: 860 MHz (224) [ 2.710104] [drm:valleyview_enable_rps], RPe GPU freq: 419 MHz (203) [ 2.712102] [drm:valleyview_enable_rps], min GPU freq: 167 MHz (191) [ 2.712104] [drm:valleyview_enable_rps], setting GPU freq to 419 MHz (203) [ 2.714107] [drm:valleyview_set_rps], GPU freq request from 314 MHz (198) to 419 MHz (203) [ 2.733120] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 2.785162] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 2.785165] [drm:ironlake_edp_backlight_on], [ 2.787168] [drm:intel_panel_enable_backlight], pipe A [ 2.787171] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7812 [ 2.787177] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 2.787183] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 2.787186] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 2.787188] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 2.787190] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 2.787192] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 2.787195] [drm:check_crtc_state], [CRTC:3] [ 2.789171] [drm:check_crtc_state], [CRTC:6] [ 2.789177] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 2.789180] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 2.789183] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 2.789190] Console: switching to colour frame buffer device 240x67 [ 2.789203] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 2.789206] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.789208] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 2.803865] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.803867] i915 0000:00:02.0: registered panic notifier [ 2.813240] acpi device:20: registered as cooling_device5 [ 2.813297] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.813573] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 2.814615] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.818782] [drm:i915_gem_open], [ 2.818809] [drm:intel_crtc_cursor_set], cursor off [ 2.818814] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 2.818821] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.818826] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 2.818830] [drm:intel_crtc_cursor_set], cursor off [ 2.818833] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 2.818836] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 2.818840] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 2.818855] [drm:i915_gem_open], [ 2.818869] [drm:intel_crtc_cursor_set], cursor off [ 2.818872] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 2.818876] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.818880] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 2.818884] [drm:intel_crtc_cursor_set], cursor off [ 2.818887] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 2.818890] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 2.818893] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 2.818907] [drm:i915_gem_open], [ 2.818970] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 2.818977] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 2.818985] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 2.818989] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] [ 2.818993] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 2.818998] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 2.819002] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 2.819162] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 2.820483] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 2.820503] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 2.820510] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes : [ 2.820513] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.820526] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 2.826988] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 2.01 PQ: 0 ANSI: 0 [ 2.828887] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.832912] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 2.832924] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 2.832928] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 2.832933] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 2.835474] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 2.838212] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 2.838220] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.838375] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 2.838381] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.838384] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 2.838387] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 2.838665] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.838668] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 2.838671] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.838676] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 2.838689] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 2.838693] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 2.838696] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 2.838700] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 2.844212] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 2.844218] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.844374] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 2.844379] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.844382] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 2.844385] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 2.844660] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.844663] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 2.844666] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.844670] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 2.844684] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 2.844689] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 2.844692] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 2.844840] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 2.844844] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.844848] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 2.844853] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 2.844856] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 2.844859] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 2.845006] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 2.845010] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.845013] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 2.845020] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 2.845024] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 2.845027] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 2.845031] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 2.845035] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 2.845038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 2.845041] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 2.845044] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 2.845049] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 2.845053] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 2.845056] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 2.845225] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.845229] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 2.845233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 2.845238] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 2.845241] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 2.845245] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 2.845393] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.845397] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 2.845400] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 2.845429] [drm:drm_mode_addfb], [FB:27] [ 2.906359] [drm:drm_mode_addfb], [FB:27] [ 2.906394] [drm:drm_mode_setcrtc], [CRTC:3] [ 2.906402] [drm:drm_mode_setcrtc], [CONNECTOR:20:eDP-1] [ 2.906406] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 2.906412] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 [ 2.906416] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 2.911884] [drm:i9xx_update_plane], Writing base 0085C000 00000000 0 0 7680 [ 2.963306] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 2.963312] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 2.969805] [drm:drm_mode_setcrtc], [CRTC:3] [ 2.969817] [drm:drm_mode_setcrtc], [CONNECTOR:20:eDP-1] [ 2.969821] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 2.969827] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.969831] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.020951] systemd-journald[1160]: Received SIGTERM [ 3.094493] NET: Registered protocol family 10 [ 3.115354] LVM: Logical Volume autoactivation enabled. [ 3.115362] LVM: Activation generator successfully completed. [ 3.175486] systemd-readahead[2005]: Failed to create fanotify object: Function not implemented [ 3.176497] systemd-readahead[2004]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 3.244198] systemd-udevd[2371]: starting version 204 [ 3.259311] EXT4-fs (sda4): re-mounted. Opts: (null) [ 3.361572] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 3.361745] ACPI: AC Adapter [ADP1] (on-line) [ 3.369018] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 3.369031] ACPI: Battery Slot [BAT0] (battery present) [ 3.369101] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 3.369109] ACPI: Battery Slot [BAT1] (battery absent) [ 3.399434] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 3.467981] snd_hda_intel 0000:00:1b.0: irq 106 for MSI/MSI-X [ 3.468026] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 3.473984] Adding 3964924k swap on /dev/sda3. Priority:-1 extents:1 across:3964924k SS [ 3.491916] systemd-udevd[2640]: renamed network interface eth0 to enp0s20u6u2 [ 3.499159] ALSA sound/pci/hda/patch_realtek.c:419 SKU: Nid=0x1d sku_cfg=0x4014c601 [ 3.499165] ALSA sound/pci/hda/patch_realtek.c:421 SKU: port_connectivity=0x1 [ 3.499168] ALSA sound/pci/hda/patch_realtek.c:422 SKU: enable_pcbeep=0x1 [ 3.499171] ALSA sound/pci/hda/patch_realtek.c:423 SKU: check_sum=0x00000004 [ 3.499174] ALSA sound/pci/hda/patch_realtek.c:424 SKU: customization=0x000000c6 [ 3.499177] ALSA sound/pci/hda/patch_realtek.c:425 SKU: external_amp=0x0 [ 3.499180] ALSA sound/pci/hda/patch_realtek.c:426 SKU: platform_type=0x0 [ 3.499182] ALSA sound/pci/hda/patch_realtek.c:427 SKU: swap=0x0 [ 3.499185] ALSA sound/pci/hda/patch_realtek.c:428 SKU: override=0x1 [ 3.500314] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 3.500319] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.500323] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.500326] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 3.500328] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 3.500332] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x19 [ 3.500336] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18 [ 3.500339] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a [ 3.500343] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x4014c601 for NID 0x1d [ 3.500346] ALSA sound/pci/hda/patch_realtek.c:507 realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0262 [ 3.513500] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 3.513507] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.513511] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.513513] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 3.513516] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x4/0x5 [ 3.513519] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 3.540769] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.547790] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 3.552351] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 3.571324] type=1305 audit(1343923787.562:2): audit_pid=2885 old=0 auid=4294967295 ses=4294967295 res=1 [ 3.607211] systemd[1]: Unit rngd.service entered failed state. [ 3.656535] systemd-logind[2920]: Watching system buttons on /dev/input/event4 (Power Button) [ 3.656681] systemd-logind[2920]: Watching system buttons on /dev/input/event7 (Video Bus) [ 3.656818] systemd-logind[2920]: Watching system buttons on /dev/input/event2 (Power Button) [ 3.656979] systemd-logind[2920]: Watching system buttons on /dev/input/event1 (Lid Switch) [ 3.657114] systemd-logind[2920]: Watching system buttons on /dev/input/event3 (Sleep Button) [ 4.169365] Bluetooth: Core ver 2.16 [ 4.175941] NET: Registered protocol family 31 [ 4.175948] Bluetooth: HCI device and connection manager initialized [ 4.175964] Bluetooth: HCI socket layer initialized [ 4.175968] Bluetooth: L2CAP socket layer initialized [ 4.175984] Bluetooth: SCO socket layer initialized [ 4.185020] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.185026] Bluetooth: BNEP filters: protocol multicast [ 4.185040] Bluetooth: BNEP socket layer initialized [ 4.367667] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 4.367676] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 4.466990] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.466996] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 [ 4.466999] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.467009] [drm:i9xx_update_plane], Writing base 00073000 00000000 0 0 7680 [ 4.518583] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 4.518588] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 4.518595] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 4.518599] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 4.518603] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.518608] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.518611] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.518614] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.518630] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.518633] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.518635] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.536740] [drm:intel_crtc_cursor_set], cursor off [ 4.536747] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.536755] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.536760] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.536764] [drm:intel_crtc_cursor_set], cursor off [ 4.536767] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 4.536770] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 4.536774] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.857028] Ebtables v2.0 registered [ 4.870615] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.883053] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.910932] IPv6: ADDRCONF(NETDEV_UP): enp0s20u6u2: link is not ready [ 5.038343] asix 1-6.2:1.0 enp0s20u6u2: link down [ 6.703636] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u6u2: link becomes ready [ 6.704063] asix 1-6.2:1.0 enp0s20u6u2: link up, 100Mbps, full-duplex, lpa 0x43E1 [ 28.903829] [drm:i915_gem_open], [ 28.903897] [drm:intel_crtc_cursor_set], cursor off [ 28.903902] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 28.903909] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 28.903913] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 28.903918] [drm:intel_crtc_cursor_set], cursor off [ 28.903920] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 28.903923] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 28.903927] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 28.916341] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 28.916346] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 28.916349] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 28.931026] [drm:i915_gem_open], [ 28.931046] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 28.934044] [drm:drm_mode_addfb], [FB:27] [ 28.934082] [drm:drm_mode_addfb], [FB:27] [ 28.934887] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 28.934897] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 28.934972] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 28.934980] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 28.935290] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 28.935298] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 28.935337] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 28.935344] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 28.935377] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 28.935384] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 28.935442] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 28.935449] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 28.975013] [drm:drm_mode_addfb], [FB:27] [ 28.975033] [drm:drm_mode_setcrtc], [CRTC:3] [ 28.975042] [drm:drm_mode_setcrtc], [CONNECTOR:20:eDP-1] [ 28.975046] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0) [ 28.975051] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 [ 28.975056] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 28.976457] [drm:valleyview_set_rps], GPU freq request from 419 MHz (203) to 167 MHz (191) [ 28.980457] [drm:vlv_update_rps_cur_delay], Punit overrode GPU freq: 167 MHz (191) requested, but got 188 Mhz (192) [ 28.980463] [drm:valleyview_set_rps], GPU freq request from 188 MHz (192) to 860 MHz (224) [ 28.982470] [drm:i9xx_update_plane], Writing base 0087C000 00000000 0 0 7680 [ 29.034497] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 29.034503] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 30.835111] [drm:valleyview_set_rps], GPU freq request from 860 MHz (224) to 167 MHz (191) [ 31.726620] [drm:vlv_update_rps_cur_delay], Punit overrode GPU freq: 167 MHz (191) requested, but got 188 Mhz (192) [ 31.726648] [drm:valleyview_set_rps], GPU freq request from 188 MHz (192) to 167 MHz (191) [ 33.728273] [drm:vlv_update_rps_cur_delay], Punit overrode GPU freq: 167 MHz (191) requested, but got 188 Mhz (192) [ 33.728301] [drm:valleyview_set_rps], GPU freq request from 188 MHz (192) to 167 MHz (191) [ 44.293561] PM: Syncing filesystems ... done. [ 44.301674] PM: Preparing system for mem sleep [ 44.301806] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 44.302997] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 44.303925] PM: Entering mem sleep [ 44.304025] Suspending console(s) (use no_console_suspend to debug) [ 44.304737] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 44.304818] sd 0:0:0:0: [sda] Stopping disk [ 44.504899] serial 00:04: disabled [ 44.507079] [drm:vlv_update_rps_cur_delay], Punit overrode GPU freq: 167 MHz (191) requested, but got 188 Mhz (192) [ 44.507082] [drm:valleyview_set_rps], GPU freq request from 188 MHz (192) to 860 MHz (224) [ 44.509124] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 44.509136] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 44.509140] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 44.509142] ------------[ cut here ]------------ [ 44.509166] WARNING: CPU: 2 PID: 925 at drivers/gpu/drm/i915/intel_display.c:9948 intel_get_pipe_from_connector+0x26/0x3c [i915]() [ 44.509186] Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables bnep bluetooth rfkill snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer snd serio_raw pcspkr soundcore battery ac acpi_cpufreq freq_table uinput ipv6 i915 drm_kms_helper drm video button [ 44.509189] CPU: 2 PID: 925 Comm: kworker/u8:2 Not tainted 3.12.0_drm-intel-fixes_f727b4_20131121_+ #2660 [ 44.509191] Hardware name: Intel Corp. VALLEYVIEW B3 PLATFORM/NOTEBOOK, BIOS BBAYCRB1.X64.0068.R30.1311051945 BBAY_X64_R_V68_30 11/05/2013 [ 44.509197] Workqueue: events_unbound async_run_entry_fn [ 44.509201] 0000000000000000 0000000000000009 ffffffff817046dc 0000000000000000 [ 44.509204] ffffffff8103319e 00000000001e1200 ffffffffa008e962 ffff88003f884b10 [ 44.509206] ffff88003f886800 ffff88003f884800 0000000000000002 ffff88003f884800 [ 44.509207] Call Trace: [ 44.509214] [] ? dump_stack+0x41/0x51 [ 44.509219] [] ? warn_slowpath_common+0x73/0x8b [ 44.509234] [] ? intel_get_pipe_from_connector+0x26/0x3c [i915] [ 44.509250] [] ? intel_get_pipe_from_connector+0x26/0x3c [i915] [ 44.509266] [] ? intel_panel_disable_backlight+0x1b/0x14c [i915] [ 44.509282] [] ? ironlake_edp_backlight_off+0x2a/0x9a [i915] [ 44.509297] [] ? intel_disable_dp+0x25/0x61 [i915] [ 44.509312] [] ? i9xx_crtc_disable+0x5e/0x25e [i915] [ 44.509323] [] ? i915_drm_freeze+0xd7/0x12f [i915] [ 44.509334] [] ? i915_pm_suspend+0x4c/0x6e [i915] [ 44.509339] [] ? pci_pm_suspend+0x6e/0xee [ 44.509341] [] ? pci_pm_poweroff+0xb4/0xb4 [ 44.509345] [] ? dpm_run_callback.isra.14+0x24/0x52 [ 44.509348] [] ? __device_suspend+0x109/0x16c [ 44.509351] [] ? ttwu_do_wakeup+0xe/0x7e [ 44.509354] [] ? async_suspend+0x16/0x7d [ 44.509357] [] ? async_run_entry_fn+0x55/0x10b [ 44.509361] [] ? process_one_work+0x1c5/0x2e4 [ 44.509365] [] ? pwq_activate_delayed_work+0x1e/0x28 [ 44.509367] [] ? worker_thread+0x1c7/0x2bc [ 44.509370] [] ? rescuer_thread+0x251/0x251 [ 44.509373] [] ? kthread+0xad/0xb5 [ 44.509377] [] ? kthread_freezable_should_stop+0x40/0x40 [ 44.509380] [] ? ret_from_fork+0x7c/0xb0 [ 44.509383] [] ? kthread_freezable_should_stop+0x40/0x40 [ 44.509385] ---[ end trace 4c8cb7379159b17b ]--- [ 44.509387] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 44.509390] [drm:ironlake_edp_backlight_off], [ 44.511086] [drm:valleyview_set_rps], GPU freq request from 860 MHz (224) to 419 MHz (203) [ 44.710883] [drm:ironlake_edp_panel_off], Turn eDP power off [ 44.710886] [drm:ironlake_wait_panel_off], Wait for panel power off time [ 44.710890] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000 [ 45.235671] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 45.249679] [drm:intel_dp_link_down], [ 45.301720] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 45.352769] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 45.365993] PM: suspend of devices complete after 1060.987 msecs [ 45.366156] PM: late suspend of devices complete after 0.159 msecs [ 45.366604] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 45.376810] PM: noirq suspend of devices complete after 10.642 msecs [ 45.376843] ACPI: Preparing to enter system sleep state S3 [ 45.377078] PM: Saving platform NVS memory [ 45.378448] Disabling non-boot CPUs ... [ 45.379804] smpboot: CPU 1 is now offline [ 45.381369] smpboot: CPU 2 is now offline [ 45.381934] Broke affinity for irq 103 [ 45.381937] Broke affinity for irq 104 [ 45.382970] smpboot: CPU 3 is now offline [ 45.383619] ACPI: Low-level resume complete [ 45.383684] PM: Restoring platform NVS memory [ 45.384627] Enabling non-boot CPUs ... [ 45.384678] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 45.402961] CPU1 is up [ 45.402989] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 45.421160] CPU2 is up [ 45.421183] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 45.439361] CPU3 is up [ 45.440065] ACPI: Waking up from system sleep state S3 [ 45.448318] acpi LNXPOWER:00: Turning OFF [ 45.481220] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 45.492522] PM: noirq resume of devices complete after 44.156 msecs [ 45.492594] PM: early resume of devices complete after 0.046 msecs [ 45.492645] i915 0000:00:02.0: setting latency timer to 64 [ 45.492648] ahci 0000:00:13.0: setting latency timer to 64 [ 45.492701] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 45.492879] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 45.492911] snd_hda_intel 0000:00:1b.0: irq 106 for MSI/MSI-X [ 45.495351] dpm_run_callback(): pnp_bus_resume+0x0/0x8f returns -19 [ 45.495353] PM: Device 00:05 failed to resume: error -19 [ 45.495356] dpm_run_callback(): pnp_bus_resume+0x0/0x8f returns -19 [ 45.495358] PM: Device 00:06 failed to resume: error -19 [ 45.499498] [drm:i915_redisable_vga], Something enabled VGA plane, disabling it [ 45.501202] [drm:intel_opregion_setup], graphic opregion physical addr: 0x79568018 [ 45.501220] [drm:intel_opregion_setup], Public ACPI methods supported [ 45.501222] [drm:intel_opregion_setup], ASLE supported [ 45.501255] [drm:init_status_page], render ring hws offset: 0x00001000 [ 45.501258] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 45.501261] [drm:i915_pages_create_for_stolen], offset=0x849000, size=131072 [ 45.503219] [drm:init_pipe_control], render ring pipe control offset: 0x00024000 [ 45.503231] [drm:init_status_page], bsd ring hws offset: 0x00025000 [ 45.503233] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 45.503236] [drm:i915_pages_create_for_stolen], offset=0x869000, size=131072 [ 45.503315] [drm:init_status_page], blitter ring hws offset: 0x00048000 [ 45.503317] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 45.503320] [drm:i915_pages_create_for_stolen], offset=0x889000, size=131072 [ 45.503424] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled [ 45.503427] [drm:intel_modeset_readout_hw_state], [CRTC:6] hw state readout: disabled [ 45.503431] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe A [ 45.503435] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe A [ 45.503438] [drm:intel_modeset_readout_hw_state], [ENCODER:15:TMDS-15] hw state readout: disabled, pipe A [ 45.503441] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A [ 45.503444] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe A [ 45.503447] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:eDP-1] hw state readout: disabled [ 45.503451] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled [ 45.503454] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:HDMI-A-1] hw state readout: disabled [ 45.503456] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:DP-1] hw state readout: disabled [ 45.503459] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: disabled [ 45.503463] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 45.503465] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 45.503467] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 45.503469] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 45.503472] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 45.503473] [drm:intel_dump_pipe_config], requested mode: [ 45.503477] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 45.503479] [drm:intel_dump_pipe_config], adjusted mode: [ 45.503482] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 45.503485] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 45.503486] [drm:intel_dump_pipe_config], port clock: 0 [ 45.503488] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 45.503491] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 45.503493] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 45.503494] [drm:intel_dump_pipe_config], ips: 0 [ 45.503496] [drm:intel_dump_pipe_config], double wide: 0 [ 45.503498] [drm:intel_dump_pipe_config], [CRTC:6][setup_hw_state] config for pipe B [ 45.503500] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 45.503502] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 45.503504] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 45.503507] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 45.503508] [drm:intel_dump_pipe_config], requested mode: [ 45.503512] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 45.503513] [drm:intel_dump_pipe_config], adjusted mode: [ 45.503516] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 45.503519] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 45.503521] [drm:intel_dump_pipe_config], port clock: 0 [ 45.503522] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 45.503525] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 45.503527] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 45.503528] [drm:intel_dump_pipe_config], ips: 0 [ 45.503530] [drm:intel_dump_pipe_config], double wide: 0 [ 45.503534] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 45.503538] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains [ 45.503543] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 45.503554] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 24 [ 45.503556] [drm:intel_dp_compute_config], DP link bw required 333072 available 432000 [ 45.503559] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 45.503561] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 45.503563] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 45.503564] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 45.503567] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 45.503570] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 45.503571] [drm:intel_dump_pipe_config], requested mode: [ 45.503575] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 45.503576] [drm:intel_dump_pipe_config], adjusted mode: [ 45.503580] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 45.503583] [drm:intel_dump_crtc_timings], crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 45.503585] [drm:intel_dump_pipe_config], port clock: 270000 [ 45.503587] [drm:intel_dump_pipe_config], pipe src size: 1920x1080 [ 45.503589] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 45.503591] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 45.503593] [drm:intel_dump_pipe_config], ips: 0 [ 45.503594] [drm:intel_dump_pipe_config], double wide: 0 [ 45.525223] [drm:i9xx_update_plane], Writing base 0087C000 00000000 0 0 7680 [ 45.525228] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 45.525231] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080] [ 45.543233] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000 [ 45.543236] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 45.543238] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 500 [ 45.543240] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 45.543245] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f05 [ 45.543248] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 45.543250] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 45.543253] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 08000001 control abcd0000 [ 45.743549] usb 1-6: reset high-speed USB device number 4 using xhci_hcd [ 45.754692] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003fa057c0 [ 45.810461] ata1: SATA link down (SStatus 0 SControl 300) [ 45.818827] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 45.818836] [drm:ironlake_edp_panel_vdd_on], eDP was not running [ 45.837608] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 45.864625] ata2.00: configured for UDMA/100 [ 46.029871] usb 1-6.1: reset high-speed USB device number 5 using xhci_hcd [ 46.034635] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 46.043913] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003fadf500 [ 46.043916] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003fadf540 [ 46.048644] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 46.049182] [drm:intel_dp_start_link_train], clock recovery OK [ 46.049183] [drm:ironlake_edp_panel_on], Turn eDP power on [ 46.049186] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 46.049189] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008 [ 46.049192] [drm:ironlake_wait_panel_on], Wait for panel power on [ 46.049195] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b [ 46.115588] usb 1-6.2: reset high-speed USB device number 6 using xhci_hcd [ 46.135607] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079a5ac00 [ 46.135610] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079a5ac40 [ 46.135612] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079a5ac80 [ 46.136048] asix 1-6.2:1.0: no reset_resume for driver asix? [ 46.136059] asix 1-6.2:1.0 enp0s20u6u2: unregister 'asix' usb-0000:00:14.0-6.2, ASIX AX88772 USB 2.0 Ethernet [ 46.141731] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 46.170131] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 46.170148] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 46.222126] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful [ 46.222305] [drm:g4x_check_srwm], SR watermark: display plane 107, cursor 6 [ 46.222308] [drm:g4x_check_srwm], SR watermark: display plane 211, cursor 10 [ 46.222311] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=2, cursor=2, SR: plane=107, cursor=10 [ 46.273827] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 46.325869] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 46.325872] [drm:ironlake_edp_backlight_on], [ 46.327870] [drm:intel_panel_enable_backlight], pipe A [ 46.327874] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7812 [ 46.327885] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 46.327890] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 46.327895] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 46.327898] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 46.327900] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 46.327903] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 46.327905] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 46.327908] [drm:check_crtc_state], [CRTC:3] [ 46.329879] [drm:check_crtc_state], [CRTC:6] [ 46.329884] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 46.329888] [drm:intel_resume_hotplug], running encoder hotplug functions [ 46.330375] [drm:intel_dp_get_dpcd], DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 46.330517] [drm:intel_dp_get_dpcd], Detected EDP PSR Panel. [ 46.330787] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 46.330789] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 46.330793] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 46.330946] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 46.331096] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 46.331103] [drm:drm_helper_hpd_irq_event], [CONNECTOR:20:eDP-1] status updated from unknown to connected [ 46.331106] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=0 [ 46.331108] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 46.336879] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 46.336880] [drm:intel_crt_detect], CRT not detected via hotplug [ 46.337086] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 46.337088] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 46.337090] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 46.337092] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 46.337367] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 46.337369] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 46.337370] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 46.337373] [drm:drm_helper_hpd_irq_event], [CONNECTOR:9:VGA-1] status updated from unknown to disconnected [ 46.337376] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 46.337583] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 46.337585] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 46.337588] [drm:drm_helper_hpd_irq_event], [CONNECTOR:12:HDMI-A-1] status updated from unknown to disconnected [ 46.337590] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 46.337593] [drm:drm_helper_hpd_irq_event], [CONNECTOR:16:DP-1] status updated from unknown to disconnected [ 46.337595] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 46.337802] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 46.337803] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 46.337806] [drm:drm_helper_hpd_irq_event], [CONNECTOR:18:HDMI-A-2] status updated from unknown to disconnected [ 46.743613] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000 [ 46.743630] [drm:i915_pages_create_for_stolen], offset=0x3efa000, size=24576 [ 46.743651] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 46.743669] [drm:valleyview_enable_rps], DDR speed: 1333 MHz [ 46.743673] [drm:valleyview_enable_rps], GPLL enabled? yes [ 46.743681] [drm:valleyview_enable_rps], GPU status: 0x0000c6d0 [ 46.743690] [drm:valleyview_enable_rps], current GPU freq: 314 MHz (198) [ 46.745211] [drm:valleyview_enable_rps], max GPU freq: 860 MHz (224) [ 46.749212] [drm:valleyview_enable_rps], RPe GPU freq: 419 MHz (203) [ 46.751216] [drm:valleyview_enable_rps], min GPU freq: 167 MHz (191) [ 46.751218] [drm:valleyview_enable_rps], setting GPU freq to 419 MHz (203) [ 46.753216] [drm:valleyview_set_rps], GPU freq request from 314 MHz (198) to 419 MHz (203) [ 47.007671] ata1.00: configured for UDMA/133 [ 47.008234] sd 0:0:0:0: [sda] Starting disk [ 47.008999] PM: resume of devices complete after 1515.160 msecs [ 47.230971] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 47.312552] asix 1-6.2:1.0 eth0: register 'asix' at usb-0000:00:14.0-6.2, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:b1:d9:50 [ 47.313056] PM: Finishing wakeup. [ 47.313058] Restarting tasks ... done. [ 47.315441] video LNXVIDEO:00: Restoring backlight state [ 47.337880] systemd-udevd[3263]: renamed network interface eth0 to enp0s20u6u2 [ 47.485824] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 48.294746] IPv6: ADDRCONF(NETDEV_UP): enp0s20u6u2: link is not ready [ 48.837367] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 48.837393] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 50.105745] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u6u2: link becomes ready [ 50.106540] asix 1-6.2:1.0 enp0s20u6u2: link up, 100Mbps, full-duplex, lpa 0x43E1 [ 105.151811] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 105.151816] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 [ 105.151820] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 105.151829] [drm:i9xx_update_plane], Writing base 00073000 00000000 0 0 7680 [ 105.203723] [drm:ironlake_wait_for_vblank], vblank wait timed out [ 105.203727] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 105.203730] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 105.203733] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 105.203736] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 105.203738] [drm:drm_fb_helper_hotplug_event], [ 105.203741] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] [ 105.203744] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 105.203747] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 105.203751] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 105.204274] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 105.204429] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 105.204445] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 105.204450] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes : [ 105.204454] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 105.204457] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 105.204460] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 105.204462] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 105.209729] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 105.209731] [drm:intel_crt_detect], CRT not detected via hotplug [ 105.209909] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 105.209913] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 105.209915] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 105.209918] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 105.210193] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 105.210195] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 105.210196] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 105.210200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 105.210205] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 105.210207] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 105.210353] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 105.210355] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 105.210358] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 105.210360] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 105.210363] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 105.210366] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 105.210368] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 105.210370] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 105.210516] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 105.210518] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 105.210520] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 105.210523] [drm:drm_setup_crtcs], [ 105.210527] [drm:drm_enable_connectors], connector 20 enabled? yes [ 105.210529] [drm:drm_enable_connectors], connector 9 enabled? no [ 105.210530] [drm:drm_enable_connectors], connector 12 enabled? no [ 105.210532] [drm:drm_enable_connectors], connector 16 enabled? no [ 105.210533] [drm:drm_enable_connectors], connector 18 enabled? no [ 105.210536] [drm:drm_target_preferred], looking for cmdline mode on connector 20 [ 105.210537] [drm:drm_target_preferred], looking for preferred mode on connector 20 [ 105.210539] [drm:drm_target_preferred], found mode 1920x1080 [ 105.210541] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 105.210545] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3 [ 105.210553] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 105.210557] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 105.210559] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 105.210562] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 105.210565] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 105.210567] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 105.210571] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 105.210574] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 105.210576] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 105.210593] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 105.210596] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 105.210598] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 107.709211] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 107.709237] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007