[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.1 (tenchi@tenchi-htpc) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #1 SMP Mon Nov 25 15:39:12 CET 2013 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077edffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077ee0000-0x0000000077ee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000077ee3000-0x0000000077eeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000077ef0000-0x0000000077efffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: nknow Unknow/NF-MCP78, BIOS 6.00 PG 11/17/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x77ee0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f3e40-0x000f3e4f] mapped at [c00f3e40] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01ae6000, 0x01ae6fff] PGTABLE [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 127540(97%) [ 0.000000] RAMDISK: [mem 0x20c68000-0x2c62bfff] [ 0.000000] ACPI: RSDP 000f80a0 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 77ee3000 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: FACP 77ee3080 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130725/tbfadt-603) [ 0.000000] ACPI: DSDT 77ee3100 0951D (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 77ee1900 00040 [ 0.000000] ACPI: SSDT 77eec700 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 77eec9c0 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098) [ 0.000000] ACPI: MCFG 77eeca00 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: APIC 77eec640 0008E (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1026MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01ae7000, 0x01ae7fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x77edffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x77edffff] [ 0.000000] On node 0 totalpages: 491133 [ 0.000000] free_area_init_node: node 0, pgdat c1918440, node_mem_map f64fe020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2054 pages used for memmap [ 0.000000] HighMem zone: 262882 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f64ba000 s33088 r0 d24256 u57344 [ 0.000000] pcpu-alloc: s33088 r0 d24256 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 489349 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.12.1 root=UUID=c52e229d-be9c-4d85-b262-5085459dc2d9 ro rootflags=subvol=@ sysrq_always_enabled ignore_loglevel debug log_buf_len=5M nouveau.config=NvMSI=0 nouveau.config=NvForcePost=1 sysrq_always_enabled [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] sysrq: sysrq always enabled. [ 7.148861] udevd[98]: starting version 175 [ 7.289547] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 7.289880] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 7.289900] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 7.360775] usb-storage 2-4:1.0: USB Mass Storage device detected [ 7.360983] hidraw: raw HID events driver (C) Jiri Kosina [ 7.381175] usb-storage 2-4:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 7.401304] scsi0 : usb-storage 2-4:1.0 [ 7.401445] usbcore: registered new interface driver usb-storage [ 7.667576] wmi: Mapper loaded [ 7.678655] usbcore: registered new interface driver usbhid [ 7.678675] usbhid: USB HID core driver [ 7.689715] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input4 [ 7.689772] [drm] Initialized drm 1.1.0 20060810 [ 7.689866] hid-generic 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3/input0 [ 7.694258] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.1/input/input5 [ 7.694536] hid-generic 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-3/input1 [ 7.812949] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:30:18:a9:b3:e4 [ 7.812977] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 7.813431] pata_amd 0000:00:06.0: version 0.4.1 [ 7.813488] pata_amd 0000:00:06.0: setting latency timer to 64 [ 7.815074] scsi1 : pata_amd [ 7.815242] scsi2 : pata_amd [ 7.815290] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 7.815297] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 7.815352] ahci 0000:00:09.0: version 3.0 [ 7.815538] ata1: port disabled--ignoring [ 7.815600] ata2: port disabled--ignoring [ 7.815709] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 [ 7.815763] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP [ 7.815895] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 7.815907] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh [ 7.815920] ahci 0000:00:09.0: setting latency timer to 64 [ 7.826264] scsi3 : ahci [ 7.827062] scsi4 : ahci [ 7.827237] scsi5 : ahci [ 7.827322] scsi6 : ahci [ 7.827406] scsi7 : ahci [ 7.827488] scsi8 : ahci [ 7.827545] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 22 [ 7.827552] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 22 [ 7.827562] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 22 [ 7.827568] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 22 [ 7.827578] ata7: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 22 [ 7.827584] ata8: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 22 [ 8.144032] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.144067] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.144083] ata7: SATA link down (SStatus 0 SControl 300) [ 8.144108] ata8: SATA link down (SStatus 0 SControl 300) [ 8.144128] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.144144] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.144210] ata4.00: ATA-8: OCZ-VERTEX, 1.7, max UDMA/133 [ 8.144216] ata4.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 8.145615] ata3.00: ATA-8: Hitachi HDS724040ALE640, MJAOA3B0, max UDMA/133 [ 8.145621] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.146618] ata4.00: configured for UDMA/133 [ 8.147164] ata3.00: configured for UDMA/133 [ 8.147312] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72404 MJAO PQ: 0 ANSI: 5 [ 8.147498] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 8.147630] scsi 4:0:0:0: Direct-Access ATA OCZ-VERTEX 1.7 PQ: 0 ANSI: 5 [ 8.147755] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 8.147824] sd 4:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 8.147898] sd 4:0:0:0: [sdb] Write Protect is off [ 8.147906] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.147936] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.147976] sd 3:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 8.147985] sd 3:0:0:0: [sda] 4096-byte physical blocks [ 8.148138] sd 3:0:0:0: [sda] Write Protect is off [ 8.148145] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.148195] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.148784] sdb: sdb1 sdb2 < sdb5 > sdb3 [ 8.149144] sd 4:0:0:0: [sdb] Attached SCSI disk [ 8.149991] ata6.00: ATA-8: SAMSUNG HD203WI, 1AN10002, max UDMA/133 [ 8.150004] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.155894] ata6.00: configured for UDMA/133 [ 8.159234] sda: unknown partition table [ 8.159452] sd 3:0:0:0: [sda] Attached SCSI disk [ 8.455042] ata5.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 [ 8.455051] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.459130] ata5.00: configured for UDMA/133 [ 8.459249] scsi 5:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5 [ 8.459428] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 8.459561] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5 [ 8.459683] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 8.459758] sd 6:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8.459813] sd 6:0:0:0: [sdd] Write Protect is off [ 8.459821] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 8.459856] sd 5:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8.459894] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.459995] sd 5:0:0:0: [sdc] Write Protect is off [ 8.460020] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 8.460085] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.478019] sdd: unknown partition table [ 8.478250] sd 6:0:0:0: [sdd] Attached SCSI disk [ 8.879984] sdc: unknown partition table [ 8.880185] sd 5:0:0:0: [sdc] Attached SCSI disk [ 9.026149] scsi 0:0:0:0: Direct-Access Intenso USB 3.0 Device CC44 PQ: 0 ANSI: 0 [ 9.026465] sd 0:0:0:0: Attached scsi generic sg4 type 0 [ 9.027132] sd 0:0:0:0: [sde] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 9.029079] sd 0:0:0:0: [sde] Write Protect is off [ 9.029105] sd 0:0:0:0: [sde] Mode Sense: 23 00 00 00 [ 9.031443] sd 0:0:0:0: [sde] No Caching mode page found [ 9.031461] sd 0:0:0:0: [sde] Assuming drive cache: write through [ 9.032456] nouveau 0000:02:00.0: setting latency timer to 64 [ 9.032484] pci 0000:00:0b.0: setting latency timer to 64 [ 9.032753] sd 0:0:0:0: [sde] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 9.032864] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21 [ 9.033438] [drm] hdmi device not found 2 0 1 [ 9.033532] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0aa480a2 [ 9.033540] nouveau [ DEVICE][0000:02:00.0] Chipset: MCP77/MCP78 (NVAA) [ 9.033550] nouveau [ DEVICE][0000:02:00.0] Family : NV50 [ 9.034485] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image... [ 9.037869] sd 0:0:0:0: [sde] No Caching mode page found [ 9.037889] sd 0:0:0:0: [sde] Assuming drive cache: write through [ 9.057760] sde: unknown partition table [ 9.058755] sd 0:0:0:0: [sde] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 9.063865] sd 0:0:0:0: [sde] No Caching mode page found [ 9.063880] sd 0:0:0:0: [sde] Assuming drive cache: write through [ 9.063889] sd 0:0:0:0: [sde] Attached SCSI disk [ 9.079148] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid [ 9.079158] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN [ 9.079341] nouveau [ VBIOS][0000:02:00.0] BIT signature found [ 9.079350] nouveau [ VBIOS][0000:02:00.0] version 62.77.22.00.08 [ 9.184179] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory [ 9.184187] nouveau [ PFB][0000:02:00.0] RAM size: 128 MiB [ 9.184197] nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags [ 10.477376] nouveau [ PTHERM][0000:02:00.0] FAN control: none / external [ 10.477400] nouveau [ PTHERM][0000:02:00.0] fan management: disabled [ 10.477408] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes [ 10.477577] [TTM] Zone kernel: Available graphics memory: 437060 kiB [ 10.477585] [TTM] Zone highmem: Available graphics memory: 962824 kiB [ 10.477596] [TTM] Initializing pool allocator [ 10.477616] nouveau [ DRM] VRAM: 128 MiB [ 10.477621] nouveau [ DRM] GART: 1048576 MiB [ 10.477633] nouveau [ DRM] TMDS table version 2.0 [ 10.477640] nouveau [ DRM] DCB version 4.0 [ 10.477650] nouveau [ DRM] DCB outp 00: 01000300 0000001e [ 10.477657] nouveau [ DRM] DCB outp 01: 01011332 00020010 [ 10.477667] nouveau [ DRM] DCB conn 00: 00000100 [ 10.477676] nouveau [ DRM] DCB conn 01: 00001261 [ 10.483905] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.483912] [drm] No driver support for vblank timestamp query. [ 10.496059] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00020002 FAULT at 0x100220 [ 10.512060] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100228 [ 10.532051] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x10022c [ 10.548044] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100230 [ 10.572031] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100238 [ 10.592021] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100240 [ 10.604017] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100228 [ 10.616016] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002c0 [ 10.632013] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002e0 [ 10.652012] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002e4 [ 10.652017] nouveau [ DRM] 1 available performance level(s) [ 10.652022] nouveau [ DRM] 0: core 500MHz shader 1200MHz voltage 1100mV fanspeed 100% [ 10.652023] nouveau [ DRM] c: [ 10.660013] nouveau [ DRM] MM: using M2MF for buffer copies [ 10.715495] nouveau [ DRM] allocated 1680x1050 fb: 0x50000, bo ebea1200 [ 10.715592] fbcon: nouveaufb (fb0) is primary device [ 10.783103] Console: switching to colour frame buffer device 160x64 [ 10.784448] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device [ 10.784458] nouveau 0000:02:00.0: registered panic notifier [ 10.784487] [drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 0 [ 11.392038] raid6: mmxx1 2075 MB/s [ 11.460015] raid6: mmxx2 3723 MB/s [ 11.528026] raid6: sse1x1 565 MB/s [ 11.596060] raid6: sse1x2 1004 MB/s [ 11.664063] raid6: sse2x1 1037 MB/s [ 11.732019] raid6: sse2x2 1716 MB/s [ 11.800048] raid6: int32x1 1011 MB/s [ 11.868019] raid6: int32x2 922 MB/s [ 11.936036] raid6: int32x4 660 MB/s [ 12.004018] raid6: int32x8 925 MB/s [ 12.004025] raid6: using algorithm mmxx2 (3723 MB/s) [ 12.004038] raid6: using intx1 recovery algorithm [ 12.013867] xor: measuring software checksum speed [ 12.052010] pIII_sse : 7517.000 MB/sec [ 12.092010] prefetch64-sse: 7498.000 MB/sec [ 12.092018] xor: using function: pIII_sse (7517.000 MB/sec) [ 12.474619] bio: create slab at 1 [ 12.475583] Btrfs loaded [ 12.478518] btrfs: device fsid c52e229d-be9c-4d85-b262-5085459dc2d9 devid 1 transid 367462 /dev/sdb3 [ 12.635181] btrfs: device fsid c52e229d-be9c-4d85-b262-5085459dc2d9 devid 1 transid 367462 /dev/disk/by-uuid/c52e229d-be9c-4d85-b262-5085459dc2d9 [ 12.635965] btrfs: disk space caching is enabled [ 12.649755] Btrfs detected SSD devices, enabling SSD mode [ 16.187425] Adding 1961980k swap on /dev/sdb5. Priority:-1 extents:1 across:1961980k SSFS [ 16.231285] btrfs: disk space caching is enabled [ 16.283812] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 16.322141] btrfs: device fsid c52e229d-be9c-4d85-b262-5085459dc2d9 devid 1 transid 367462 /dev/sdb3 [ 16.326518] udevd[773]: starting version 175 [ 16.434852] lp: driver loaded but no devices found [ 16.455833] f71805f: Found F71872F/FG or F71806F/FG chip at 0x290, revision 33 [ 16.455919] ACPI Warning: 0x00000290-0x00000297 SystemIO conflicts with Region \IP__ 1 (20130725/utaddress-251) [ 16.455945] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.541575] i2c i2c-7: nForce2 SMBus adapter at 0x1c00 [ 16.541726] i2c i2c-8: nForce2 SMBus adapter at 0x1c40 [ 16.915646] FS-Cache: Loaded [ 17.160139] RPC: Registered named UNIX socket transport module. [ 17.160181] RPC: Registered udp transport module. [ 17.160188] RPC: Registered tcp transport module. [ 17.160198] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.617762] Bluetooth: Core ver 2.16 [ 17.621681] NET: Registered protocol family 31 [ 17.621712] Bluetooth: HCI device and connection manager initialized [ 17.621744] Bluetooth: HCI socket layer initialized [ 17.621753] Bluetooth: L2CAP socket layer initialized [ 17.621779] Bluetooth: SCO socket layer initialized [ 17.626914] ppdev: user-space parallel port driver [ 17.644852] init: avahi-cups-reload main process (1043) terminated with status 1 [ 17.650665] FS-Cache: Netfs 'nfs' registered for caching [ 17.745014] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.745045] Bluetooth: BNEP filters: protocol multicast [ 17.745076] Bluetooth: BNEP socket layer initialized [ 17.784109] Bluetooth: RFCOMM TTY layer initialized [ 17.784164] Bluetooth: RFCOMM socket layer initialized [ 17.784173] Bluetooth: RFCOMM ver 1.11 [ 18.070275] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 18.354593] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.572539] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 19.056115] init: failsafe main process (1311) killed by TERM signal [ 19.388851] device-mapper: multipath: version 1.5.1 loaded [ 19.663061] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [ 19.663513] forcedeth 0000:00:0a.0 eth1: MSI enabled [ 19.664015] forcedeth 0000:00:0a.0 eth1: no link during initialization [ 19.665904] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 20.390787] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 20.391177] hda_intel: Disabling MSI [ 20.391520] snd_hda_intel 0000:00:07.0: setting latency timer to 64 [ 20.827479] init: alsa-restore main process (1783) terminated with status 19 [ 21.013628] init: kdm main process (1799) killed by TERM signal [ 23.420297] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:07.0/sound/card0/input15 [ 23.420632] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input14 [ 23.420823] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input13 [ 23.421012] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input12 [ 23.421199] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input11 [ 23.421382] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input10 [ 23.421590] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input9 [ 23.421782] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input8 [ 23.421970] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input7 [ 23.617067] init: plymouth-stop pre-start process (2507) terminated with status 1 [ 480.627601] bio: create slab at 2 [ 480.836292] bio: create slab at 2 [ 484.225839] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 492.323669] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 499.091578] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 504.535270] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)