radeonfb_pci_register BEGIN ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16 radeonfb (0000:05:00.0): Found 262144k of DDR 128 bits wide videoram radeonfb (0000:05:00.0): mapped 16384k videoram radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=400.00 Mhz, System=250.00 MHz radeonfb: PLL min 20000 max 40000 1 chips in connector info - chip 1 has 2 connectors * connector 0 of type 2 (CRT) : 2300 * connector 1 of type 3 (DVI-I) : 3221 Starting monitor auto detection... i2c_adapter i2c-0: unable to read EDID block. i2c_adapter i2c-0: unable to read EDID block. i2c_adapter i2c-0: unable to read EDID block. radeonfb: I2C (port 1) ... not found i2c_adapter i2c-1: unable to read EDID block. i2c_adapter i2c-1: unable to read EDID block. i2c_adapter i2c-1: unable to read EDID block. radeonfb: I2C (port 2) ... not found radeonfb: I2C (port 3) ... found CRT display radeonfb: I2C (port 4) ... not found i2c_adapter i2c-1: unable to read EDID block. i2c_adapter i2c-1: unable to read EDID block. i2c_adapter i2c-1: unable to read EDID block. radeonfb: I2C (port 2) ... not found radeonfb: I2C (port 4) ... not found radeonfb: I2C (port 3) ... found CRT display radeonfb: Monitor 1 type CRT found radeonfb: EDID probed radeonfb: Monitor 2 type no found hStart = 1040, hEnd = 1136, hTotal = 1312 vStart = 769, vEnd = 772, vTotal = 800 h_total_disp = 0x7f00a3 hsync_strt_wid = 0xc040d v_total_disp = 0x2ff031f vsync_strt_wid = 0x30300 pixclock = 12690 freq = 7880 freq = 7880, PLL min = 20000, PLL max = 40000 ref_div = 12, ref_clk = 2700, output_freq = 31520 ref_div = 12, ref_clk = 2700, output_freq = 31520 post div = 0x2 fb_div = 0x8c ppll_div_3 = 0x2008c Console: switching to colour frame buffer device 128x48 radeonfb (0000:05:00.0): ATI Radeon [c radeonfb_pci_register END [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.25.0 20060524 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs