[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.5-302.fc20.i686+PAE (mockbuild@bkernel02) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #1 SMP Tue Dec 17 20:51:40 UTC 2013 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: System manufacturer P5K/P5K, BIOS 1201 10/14/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 120000000 mask FF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x36a00000-0x36bfffff] [ 0.000000] [mem 0x36a00000-0x36bfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x369fffff] [ 0.000000] [mem 0x34000000-0x369fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x36c00000-0x375fdfff] [ 0.000000] [mem 0x36c00000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x375fdfff] page 4k [ 0.000000] BRK [0x00e6f000, 0x00e6ffff] PGTABLE [ 0.000000] BRK [0x00e70000, 0x00e72fff] PGTABLE [ 0.000000] BRK [0x00e73000, 0x00e73fff] PGTABLE [ 0.000000] BRK [0x00e74000, 0x00e74fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36d4c000-0x3769dfff] [ 0.000000] Allocated new RAMDISK: [mem 0x363fa000-0x36d4b22b] [ 0.000000] Move RAMDISK from [mem 0x36d4c000-0x3769d22b] to [mem 0x363fa000-0x36d4b22b] [ 0.000000] ACPI: RSDP 000fbcd0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT cff80100 00054 (v01 A_M_I_ OEMXSDT 10000814 MSFT 00000097) [ 0.000000] ACPI: FACP cff80290 000F4 (v03 A_M_I_ OEMFACP 10000814 MSFT 00000097) [ 0.000000] ACPI: DSDT cff80440 090AA (v01 A0751 A0751077 00000077 INTL 20060113) [ 0.000000] ACPI: FACS cff8e000 00040 [ 0.000000] ACPI: APIC cff80390 0006C (v01 A_M_I_ OEMAPIC 10000814 MSFT 00000097) [ 0.000000] ACPI: MCFG cff80400 0003C (v01 A_M_I_ OEMMCFG 10000814 MSFT 00000097) [ 0.000000] ACPI: OEMB cff8e040 00081 (v01 A_M_I_ AMI_OEM 10000814 MSFT 00000097) [ 0.000000] ACPI: HPET cff894f0 00038 (v01 A_M_I_ OEMHPET 10000814 MSFT 00000097) [ 0.000000] ACPI: OSFR cff89530 000B0 (v01 A_M_I_ OEMOSFR 10000814 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3978MB HIGHMEM available. [ 0.000000] 885MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 375fe000 [ 0.000000] low ram: 0 - 375fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x375fdfff] [ 0.000000] HighMem [mem 0x375fe000-0x2fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xcff7ffff] [ 0.000000] node 0: [mem 0x00000000-0x2fffffff] [ 0.000000] On node 0 totalpages: 1048349 [ 0.000000] free_area_init_node: node 0, pgdat c0c8c900, node_mem_map f3dfa020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 1740 pages used for memmap [ 0.000000] Normal zone: 222718 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7957 pages used for memmap [ 0.000000] HighMem zone: 821634 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f75b3000 s35584 r0 d21760 u57344 [ 0.000000] pcpu-alloc: s35584 r0 d21760 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1046577 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.5-302.fc20.i686+PAE root=UUID=7ce82e54-d807-4eff-8538-c260183d0e65 ro vconsole.font=latarcyrheb-sun16 rhgb quiet LANG=en_US.UTF-8 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 9961464 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000375fe:00130000) [ 0.000000] Memory: 4123348K/4193396K available (5865K kernel code, 578K rwdata, 2400K rodata, 752K init, 1012K bss, 70048K reserved, 3286536K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xffa95000 - 0xfffff000 (5544 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) .init : 0xc0ca5000 - 0xc0d61000 ( 752 kB) .data : 0xc09ba98d - 0xc0ca4b80 (2984 kB) .text : 0xc0400000 - 0xc09ba98d (5866 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2405.573 MHz processor [ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4811.14 BogoMIPS (lpj=2405573) [ 0.001005] pid_max: default: 32768 minimum: 301 [ 0.001040] Security Framework initialized [ 0.001047] SELinux: Initializing. [ 0.001055] SELinux: Starting in permissive mode [ 0.001098] Mount-cache hash table entries: 512 [ 0.001324] Initializing cgroup subsys memory [ 0.001334] Initializing cgroup subsys devices [ 0.001337] Initializing cgroup subsys freezer [ 0.001339] Initializing cgroup subsys net_cls [ 0.001341] Initializing cgroup subsys blkio [ 0.001343] Initializing cgroup subsys perf_event [ 0.001371] CPU: Physical Processor ID: 0 [ 0.001372] CPU: Processor Core ID: 0 [ 0.001375] mce: CPU supports 6 MCE banks [ 0.001383] CPU0: Thermal monitoring enabled (TM2) [ 0.001394] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 tlb_flushall_shift: -1 [ 0.001513] Freeing SMP alternatives memory: 24K (c0d61000 - c0d67000) [ 0.002782] ACPI: Core revision 20130725 [ 0.006082] ACPI: All ACPI Tables successfully acquired [ 0.007009] ftrace: allocating 24905 entries in 49 pages [ 0.014085] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.014441] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.025071] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b) [ 0.026000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.026000] perf_event_intel: PEBS disabled due to CPU errata [ 0.026000] ... version: 2 [ 0.026000] ... bit width: 40 [ 0.026000] ... generic registers: 2 [ 0.026000] ... value mask: 000000ffffffffff [ 0.026000] ... max period: 000000007fffffff [ 0.026000] ... fixed-purpose events: 3 [ 0.026000] ... event mask: 0000000700000003 [ 0.026697] CPU 1 irqstacks, hard=f70e6000 soft=f70f0000 [ 0.002000] Initializing CPU#1 [ 0.038099] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.026699] smpboot: Booting Node 0, Processors # 1 [ 0.039034] CPU 2 irqstacks, hard=f7168000 soft=f716a000 [ 0.002000] Initializing CPU#2 [ 0.039036] # 2 [ 0.051109] CPU 3 irqstacks, hard=f718e000 soft=f7190000 [ 0.051112] # 3 OK [ 0.002000] Initializing CPU#3 [ 0.063027] Brought up 4 CPUs [ 0.063031] smpboot: Total of 4 processors activated (19244.58 BogoMIPS) [ 0.065118] devtmpfs: initialized [ 0.065335] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes) [ 0.066806] atomic64 test passed for i586+ platform with CX8 and with SSE [ 0.066808] pinctrl core: initialized pinctrl subsystem [ 0.066856] RTC time: 11:56:16, date: 12/22/13 [ 0.066903] NET: Registered protocol family 16 [ 0.067041] cpuidle: using governor menu [ 0.067134] ACPI: bus type PCI registered [ 0.067137] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.067194] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.067197] PCI: not using MMCONFIG [ 0.067329] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.067390] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.067392] PCI: Using configuration type 1 for base access [ 0.068564] bio: create slab at 0 [ 0.068564] ACPI: Added _OSI(Module Device) [ 0.068564] ACPI: Added _OSI(Processor Device) [ 0.068564] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.068564] ACPI: Added _OSI(Processor Aggregator Device) [ 0.069868] ACPI: EC: Look up EC in DSDT [ 0.070908] ACPI: Executed 1 blocks of module-level executable AML code [ 0.076035] ACPI: SSDT cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.076288] ACPI: Dynamic OEM Table Load: [ 0.076290] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.076474] ACPI: SSDT cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.076717] ACPI: Dynamic OEM Table Load: [ 0.076720] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.076901] ACPI: SSDT cff8e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) [ 0.077150] ACPI: Dynamic OEM Table Load: [ 0.077152] ACPI: SSDT (null) 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) [ 0.077337] ACPI: SSDT cff8e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) [ 0.077586] ACPI: Dynamic OEM Table Load: [ 0.077588] ACPI: SSDT (null) 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) [ 0.077741] ACPI: Interpreter enabled [ 0.077760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.077776] ACPI: (supports S0 S1 S3 S4 S5) [ 0.077777] ACPI: Using IOAPIC for interrupt routing [ 0.077799] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.078316] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.078318] PCI: Using MMCONFIG for extended config space [ 0.078331] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.078456] ACPI: No dock devices found. [ 0.086039] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.086044] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.086047] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.086227] ACPI: \_SB_.PCI0.MCH_: can't evaluate _ADR (0x5) [ 0.086250] ACPI: \_SB_.PCI0.PCIE: can't evaluate _ADR (0x5) [ 0.086339] PCI host bridge to bus 0000:00 [ 0.086342] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.086345] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.086348] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.086350] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.086352] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.086355] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff] [ 0.086364] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.086462] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.086501] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.086549] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.086607] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.086648] pci 0000:00:1a.0: reg 0x20: [io 0xb800-0xb81f] [ 0.086740] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.086776] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.086816] pci 0000:00:1a.1: reg 0x20: [io 0xb880-0xb89f] [ 0.086906] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.086944] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.086994] pci 0000:00:1a.2: reg 0x20: [io 0xbc00-0xbc1f] [ 0.087089] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.087134] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.087155] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff] [ 0.087239] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.087290] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.087329] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.087344] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit] [ 0.087407] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.087487] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.087551] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.087602] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.087642] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.087706] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.087758] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.087795] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 [ 0.087859] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.087910] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.087951] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.088004] pci 0000:00:1d.0: reg 0x20: [io 0xb080-0xb09f] [ 0.088095] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.088134] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.088173] pci 0000:00:1d.1: reg 0x20: [io 0xb400-0xb41f] [ 0.088264] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.088300] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.088340] pci 0000:00:1d.2: reg 0x20: [io 0xb480-0xb49f] [ 0.088432] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.088476] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.088497] pci 0000:00:1d.7: reg 0x10: [mem 0xf9fff800-0xf9fffbff] [ 0.088581] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.088632] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.088668] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.088755] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.088796] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.088870] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000] [ 0.088875] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.088879] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.088984] pci 0000:00:1f.2: [8086:2923] type 00 class 0x010601 [ 0.089011] pci 0000:00:1f.2: reg 0x10: [io 0xac00-0xac07] [ 0.089019] pci 0000:00:1f.2: reg 0x14: [io 0xa880-0xa883] [ 0.089027] pci 0000:00:1f.2: reg 0x18: [io 0xa800-0xa807] [ 0.089034] pci 0000:00:1f.2: reg 0x1c: [io 0xa480-0xa483] [ 0.089042] pci 0000:00:1f.2: reg 0x20: [io 0xa400-0xa41f] [ 0.089050] pci 0000:00:1f.2: reg 0x24: [mem 0xf9ffe800-0xf9ffefff] [ 0.089093] pci 0000:00:1f.2: PME# supported from D3hot [ 0.089172] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.089187] pci 0000:00:1f.3: reg 0x10: [mem 0xf9fff400-0xf9fff4ff 64bit] [ 0.089206] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.089334] pci 0000:01:00.0: [10de:0611] type 00 class 0x030000 [ 0.089345] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.089356] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.089366] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.089374] pci 0000:01:00.0: reg 0x24: [io 0xcc00-0xcc7f] [ 0.089381] pci 0000:01:00.0: reg 0x30: [mem 0xfe8e0000-0xfe8fffff pref] [ 0.089459] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.089463] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.089466] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff] [ 0.089470] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.089522] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.089531] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.089621] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185 [ 0.089707] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff] [ 0.089720] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref] [ 0.089770] pci 0000:03:00.0: PME# supported from D3hot [ 0.089832] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 0.089852] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07] [ 0.089863] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883] [ 0.089873] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807] [ 0.089883] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483] [ 0.089894] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f] [ 0.090003] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.090012] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.090016] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.090024] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.090101] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000 [ 0.090123] pci 0000:02:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit] [ 0.090174] pci 0000:02:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref] [ 0.090227] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.090274] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.090283] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.090288] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.090342] pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010 [ 0.090359] pci 0000:05:03.0: reg 0x10: [mem 0xfebff800-0xfebfffff] [ 0.090369] pci 0000:05:03.0: reg 0x14: [io 0xec00-0xec7f] [ 0.090435] pci 0000:05:03.0: supports D2 [ 0.090437] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold [ 0.090505] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.090509] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.090513] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.090519] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.090521] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.090524] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.090526] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.090528] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) [ 0.090553] pci_bus 0000:00: on NUMA node 0 [ 0.091129] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.091191] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.091250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.091309] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.091368] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.091428] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.091487] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.091546] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.091646] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.091652] ACPI: \_SB_.PCI0: notify handler is installed [ 0.091689] Found 1 acpi root devices [ 0.091752] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.091752] vgaarb: loaded [ 0.091752] vgaarb: bridge control possible 0000:01:00.0 [ 0.091752] SCSI subsystem initialized [ 0.091752] libata version 3.00 loaded. [ 0.091752] ACPI: bus type USB registered [ 0.092022] usbcore: registered new interface driver usbfs [ 0.092032] usbcore: registered new interface driver hub [ 0.092036] usbcore: registered new device driver usb [ 0.092073] PCI: Using ACPI for IRQ routing [ 0.092073] PCI: pci_cache_line_size set to 64 bytes [ 0.092091] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.092093] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff] [ 0.092182] NetLabel: Initializing [ 0.092184] NetLabel: domain hash size = 128 [ 0.092185] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.092195] NetLabel: unlabeled traffic allowed by default [ 0.092291] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.092295] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.092300] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.094026] Switched to clocksource hpet [ 0.101605] pnp: PnP ACPI init [ 0.101620] ACPI: bus type PNP registered [ 0.101691] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.101696] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.101736] pnp 00:01: [dma 4] [ 0.101760] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.101796] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.101824] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.101855] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.102126] pnp 00:05: [dma 2] [ 0.102174] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.102237] system 00:06: [io 0x0290-0x0297] has been reserved [ 0.102240] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.102403] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.102406] system 00:07: [io 0x0800-0x087f] could not be reserved [ 0.102409] system 00:07: [io 0x0480-0x04bf] has been reserved [ 0.102412] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.102415] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.102418] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.102421] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved [ 0.102423] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.102426] system 00:07: [mem 0xffe00000-0xffefffff] has been reserved [ 0.102429] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved [ 0.102432] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.102517] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.102735] pnp 00:09: [dma 0 disabled] [ 0.102798] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.102874] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.102877] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.102880] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.102937] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.103000] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.103009] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.103215] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.103218] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.103221] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.103223] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.103227] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.103357] pnp: PnP ACPI: found 14 devices [ 0.103359] ACPI: bus type PNP unregistered [ 0.141227] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.141232] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 [ 0.141240] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.141248] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.141251] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.141262] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment [ 0.141266] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.141268] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.141271] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.141273] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.141276] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.141281] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff] [ 0.141284] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.141287] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.141290] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.141293] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff] [ 0.141296] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.141299] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.141303] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff] [ 0.141307] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.141311] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.141314] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.141318] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff] [ 0.141322] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.141328] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.141331] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.141336] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.141340] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.141345] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.141348] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.141352] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.141356] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.141362] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.141365] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.141370] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.141377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.141379] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.141382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.141384] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.141386] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff] [ 0.141388] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.141390] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff] [ 0.141393] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.141395] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.141397] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff] [ 0.141399] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.141402] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.141404] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.141406] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.141408] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.141410] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.141412] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.141415] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.141417] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.141419] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.141421] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.141423] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.141425] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.141427] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff] [ 0.141463] NET: Registered protocol family 2 [ 0.141625] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.141651] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.141674] TCP: Hash tables configured (established 8192 bind 8192) [ 0.141694] TCP: reno registered [ 0.141696] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.141704] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.141772] NET: Registered protocol family 1 [ 1.264027] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 1.264235] pci 0000:01:00.0: Boot video device [ 1.264248] PCI: CLS 32 bytes, default 64 [ 1.264293] Unpacking initramfs... [ 1.444265] Freeing initrd memory: 9544K (f63fa000 - f6d4c000) [ 1.444923] apm: BIOS not found. [ 1.445319] Initialise system trusted keyring [ 1.445369] audit: initializing netlink socket (disabled) [ 1.445389] type=2000 audit(1387713377.444:1): initialized [ 1.464999] bounce pool size: 64 pages [ 1.465029] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.466372] zbud: loaded [ 1.466477] VFS: Disk quotas dquot_6.5.2 [ 1.466548] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.467041] msgmni has been set to 1653 [ 1.467106] Key type big_key registered [ 1.467108] SELinux: Registering netfilter hooks [ 1.468263] alg: No test for stdrng (krng) [ 1.468275] NET: Registered protocol family 38 [ 1.468279] Key type asymmetric registered [ 1.468282] Asymmetric key parser 'x509' registered [ 1.468330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.468405] io scheduler noop registered [ 1.468406] io scheduler deadline registered [ 1.468439] io scheduler cfq registered (default) [ 1.468657] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.468701] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 1.468777] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 1.468898] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 1.468951] pcieport 0000:00:1c.5: enabling device (0106 -> 0107) [ 1.469033] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 1.469110] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.469126] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.469185] intel_idle: does not run on family 6 model 15 [ 1.469265] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.469269] ACPI: Power Button [PWRB] [ 1.469308] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.469311] ACPI: Power Button [PWRF] [ 1.469376] ACPI: Requesting acpi_cpufreq [ 1.470504] GHES: HEST is not enabled! [ 1.470561] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.491153] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.491635] Non-volatile memory driver v1.3 [ 1.491637] Linux agpgart interface v0.103 [ 1.491883] ahci 0000:00:1f.2: version 3.0 [ 1.491976] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 1.492037] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.492069] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.492073] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 1.492077] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.498618] scsi0 : ahci [ 1.498727] scsi1 : ahci [ 1.498817] scsi2 : ahci [ 1.498904] scsi3 : ahci [ 1.498992] scsi4 : ahci [ 1.499076] scsi5 : ahci [ 1.499149] ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 44 [ 1.499153] ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 44 [ 1.499156] ata3: DUMMY [ 1.499158] ata4: DUMMY [ 1.499161] ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 44 [ 1.499164] ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 44 [ 1.510073] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.510079] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.510423] scsi6 : ahci [ 1.510518] scsi7 : ahci [ 1.510577] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16 [ 1.510582] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16 [ 1.510687] libphy: Fixed MDIO Bus: probed [ 1.510762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.510768] ehci-pci: EHCI PCI platform driver [ 1.510872] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 1.510882] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.510928] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.510941] ehci-pci 0000:00:1a.7: debug port 1 [ 1.514832] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.514846] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 1.520023] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.520085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.520090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.520093] usb usb1: Product: EHCI Host Controller [ 1.520097] usb usb1: Manufacturer: Linux 3.12.5-302.fc20.i686+PAE ehci_hcd [ 1.520100] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.520234] hub 1-0:1.0: USB hub found [ 1.520242] hub 1-0:1.0: 6 ports detected [ 1.520449] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 1.520458] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.520496] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.520507] ehci-pci 0000:00:1d.7: debug port 1 [ 1.524413] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.524427] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 1.530065] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.530134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.530138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.530141] usb usb2: Product: EHCI Host Controller [ 1.530144] usb usb2: Manufacturer: Linux 3.12.5-302.fc20.i686+PAE ehci_hcd [ 1.530147] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.530269] hub 2-0:1.0: USB hub found [ 1.530277] hub 2-0:1.0: 6 ports detected [ 1.530416] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.530418] ohci-pci: OHCI PCI platform driver [ 1.530429] uhci_hcd: USB Universal Host Controller Interface driver [ 1.530507] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.530510] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.530553] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.530575] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 1.530618] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.530621] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.530623] usb usb3: Product: UHCI Host Controller [ 1.530625] usb usb3: Manufacturer: Linux 3.12.5-302.fc20.i686+PAE uhci_hcd [ 1.530627] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.530715] hub 3-0:1.0: USB hub found [ 1.530722] hub 3-0:1.0: 2 ports detected [ 1.530868] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.530872] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.530912] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.530941] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 1.530984] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.530986] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.530988] usb usb4: Product: UHCI Host Controller [ 1.530991] usb usb4: Manufacturer: Linux 3.12.5-302.fc20.i686+PAE uhci_hcd [ 1.530993] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.531095] hub 4-0:1.0: USB hub found [ 1.531102] hub 4-0:1.0: 2 ports detected [ 1.531248] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.531252] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.531289] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.531310] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 [ 1.531356] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.531359] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.531361] usb usb5: Product: UHCI Host Controller [ 1.531363] usb usb5: Manufacturer: Linux 3.12.5-302.fc20.i686+PAE uhci_hcd [ 1.531366] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.531452] hub 5-0:1.0: USB hub found [ 1.531459] hub 5-0:1.0: 2 ports detected [ 1.531603] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.531607] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.531643] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.531663] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 1.531706] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.531709] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.531711] usb usb6: Product: UHCI Host Controller [ 1.531713] usb usb6: Manufacturer: Linux 3.12.5-302.fc20.i686+PAE uhci_hcd [ 1.531715] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.531806] hub 6-0:1.0: USB hub found [ 1.531813] hub 6-0:1.0: 2 ports detected [ 1.531955] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.531958] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.531994] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.532032] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 1.532074] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.532077] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.532079] usb usb7: Product: UHCI Host Controller [ 1.532081] usb usb7: Manufacturer: Linux 3.12.5-302.fc20.i686+PAE uhci_hcd [ 1.532083] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.532174] hub 7-0:1.0: USB hub found [ 1.532181] hub 7-0:1.0: 2 ports detected [ 1.532329] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.532332] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.532369] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.532389] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 1.532432] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.532434] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.532436] usb usb8: Product: UHCI Host Controller [ 1.532438] usb usb8: Manufacturer: Linux 3.12.5-302.fc20.i686+PAE uhci_hcd [ 1.532440] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.532529] hub 8-0:1.0: USB hub found [ 1.532535] hub 8-0:1.0: 2 ports detected [ 1.532664] usbcore: registered new interface driver usbserial [ 1.532673] usbcore: registered new interface driver usbserial_generic [ 1.532680] usbserial: USB Serial support registered for generic [ 1.532729] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.532730] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.533260] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.533331] mousedev: PS/2 mouse device common for all mice [ 1.533519] rtc_cmos 00:02: RTC can wake from S4 [ 1.533660] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.533687] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.533792] device-mapper: uevent: version 1.0.3 [ 1.533873] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 1.534194] hidraw: raw HID events driver (C) Jiri Kosina [ 1.534292] usbcore: registered new interface driver usbhid [ 1.534293] usbhid: USB HID core driver [ 1.534333] drop_monitor: Initializing network drop monitor service [ 1.534428] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.534469] TCP: cubic registered [ 1.534471] Initializing XFRM netlink socket [ 1.534603] NET: Registered protocol family 10 [ 1.534801] mip6: Mobile IPv6 [ 1.534803] NET: Registered protocol family 17 [ 1.535029] Using IPI No-Shortcut mode [ 1.535118] Loading compiled-in X.509 certificates [ 1.538748] Loaded X.509 cert 'Fedora kernel signing key: 73e837a719d32ee4d5994fb9c3f6edc969f4afda' [ 1.538761] registered taskstats version 1 [ 1.539159] Magic number: 9:746:934 [ 1.539235] rtc_cmos 00:02: setting system clock to 2013-12-22 11:56:18 UTC (1387713378) [ 1.539283] PM: Hibernation image not present or could not be loaded. [ 1.804029] ata1: SATA link down (SStatus 0 SControl 300) [ 1.815042] ata8: SATA link down (SStatus 0 SControl 300) [ 1.815075] ata7: SATA link down (SStatus 0 SControl 300) [ 1.822042] usb 1-4: new high-speed USB device number 2 using ehci-pci [ 1.937396] usb 1-4: New USB device found, idVendor=2109, idProduct=0811 [ 1.937402] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.937406] usb 1-4: Product: USB2.0 Hub [ 1.937684] hub 1-4:1.0: USB hub found [ 1.937890] hub 1-4:1.0: 4 ports detected [ 2.109031] ata2: SATA link down (SStatus 0 SControl 300) [ 2.363277] usb 1-4.1: new high-speed USB device number 3 using ehci-pci [ 2.437641] usb 1-4.1: New USB device found, idVendor=1a40, idProduct=0201 [ 2.437646] usb 1-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.437650] usb 1-4.1: Product: USB 2.0 Hub [MTT] [ 2.437938] hub 1-4.1:1.0: USB hub found [ 2.438028] hub 1-4.1:1.0: 7 ports detected [ 2.447040] tsc: Refined TSC clocksource calibration: 2405.454 MHz [ 2.541087] usb 7-2: new full-speed USB device number 2 using uhci_hcd [ 2.569037] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.580802] ata5.00: ATA-8: OCZ-VERTEX3, 2.25, max UDMA/133 [ 2.580807] ata5.00: 175836528 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.590714] ata5.00: configured for UDMA/133 [ 2.590892] scsi 4:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.25 PQ: 0 ANSI: 5 [ 2.591054] sd 4:0:0:0: [sda] 175836528 512-byte logical blocks: (90.0 GB/83.8 GiB) [ 2.591071] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 2.591121] sd 4:0:0:0: [sda] Write Protect is off [ 2.591124] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.591166] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.591689] sda: sda1 sda2 [ 2.591978] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.681060] usb 7-2: New USB device found, idVendor=0a12, idProduct=0001 [ 2.681064] usb 7-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.746142] usb 1-4.1.1: new low-speed USB device number 4 using ehci-pci [ 2.828894] usb 1-4.1.1: New USB device found, idVendor=046d, idProduct=c326 [ 2.828899] usb 1-4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.828902] usb 1-4.1.1: Product: USB Keyboard [ 2.828905] usb 1-4.1.1: Manufacturer: Logitech [ 2.834997] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/input/input3 [ 2.835091] hid-generic 0003:046D:C326.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.7-4.1.1/input0 [ 2.842015] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.1/input/input4 [ 2.842237] hid-generic 0003:046D:C326.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.7-4.1.1/input1 [ 2.904142] usb 1-4.1.2: new full-speed USB device number 5 using ehci-pci [ 2.981393] usb 1-4.1.2: New USB device found, idVendor=046d, idProduct=c52b [ 2.981398] usb 1-4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.981401] usb 1-4.1.2: Product: USB Receiver [ 2.981405] usb 1-4.1.2: Manufacturer: Logitech [ 3.048140] usb 1-4.1.6: new full-speed USB device number 6 using ehci-pci [ 3.051081] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.076457] ata6.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133 [ 3.076461] ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.077103] ata6.00: configured for UDMA/133 [ 3.077237] scsi 5:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5 [ 3.077382] sd 5:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 3.077387] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 3.077421] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 3.077444] sd 5:0:0:0: [sdb] Write Protect is off [ 3.077448] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.077490] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.089564] sdb: unknown partition table [ 3.089744] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3.090057] Freeing unused kernel memory: 752K (c0ca5000 - c0d61000) [ 3.090142] Write protecting the kernel text: 5868k [ 3.090162] Write protecting the kernel read-only data: 2404k [ 3.090167] NX-protecting the kernel data: 4372k [ 3.093897] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 3.094120] systemd[1]: Running in initial RAM disk. [ 3.094180] systemd[1]: Set hostname to . [ 3.100173] systemd[1]: Expecting device dev-disk-by\x2duuid-7ce82e54\x2dd807\x2d4eff\x2d8538\x2dc260183d0e65.device... [ 3.100188] systemd[1]: Starting -.slice. [ 3.100355] systemd[1]: Created slice -.slice. [ 3.100369] systemd[1]: Starting System Slice. [ 3.100444] systemd[1]: Created slice System Slice. [ 3.100455] systemd[1]: Starting Slices. [ 3.100468] systemd[1]: Reached target Slices. [ 3.100478] systemd[1]: Starting Timers. [ 3.100489] systemd[1]: Reached target Timers. [ 3.100501] systemd[1]: Starting Journal Socket. [ 3.100564] systemd[1]: Listening on Journal Socket. [ 3.100749] systemd[1]: Starting dracut cmdline hook... [ 3.101256] systemd[1]: Started Load Kernel Modules. [ 3.101319] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 3.101661] systemd[1]: Starting Setup Virtual Console... [ 3.102022] systemd[1]: Starting Journal Service... [ 3.102423] systemd[1]: Started Journal Service. [ 3.107570] systemd-journald[80]: Vacuuming done, freed 0 bytes [ 3.172685] systemd-udevd[142]: starting version 208 [ 3.218411] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 3.218509] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 3.220173] scsi8 : pata_jmicron [ 3.220251] scsi9 : pata_jmicron [ 3.220294] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 3.220297] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 3.221670] [drm] Initialized drm 1.1.0 20060810 [ 3.231835] pci 0000:00:1e.0: setting latency timer to 64 [ 3.241988] wmi: Mapper loaded [ 3.266744] [drm] hdmi device not found 1 0 1 [ 3.266840] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x092880a2 [ 3.266843] nouveau [ DEVICE][0000:01:00.0] Chipset: G92 (NV92) [ 3.266845] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 3.267706] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.287071] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 3.314907] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 3.314911] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 3.315021] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 3.315024] nouveau [ VBIOS][0000:01:00.0] version 62.92.24.00.00 [ 3.335182] nouveau [ PFB][0000:01:00.0] RAM type: GDDR3 [ 3.335186] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB [ 3.335188] nouveau [ PFB][0000:01:00.0] ZCOMP: 4032 tags [ 3.338401] usb 1-4.1.6: New USB device found, idVendor=0a12, idProduct=0001 [ 3.338406] usb 1-4.1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.338408] usb 1-4.1.6: Product: BT2.0 [ 3.348283] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.7-4.1.2/input2 [ 3.351177] input: Logitech Unifying Device. Wireless PID:4026 as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2:1.2/0003:046D:C52B.0005/input/input5 [ 3.351278] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4026] on usb-0000:00:1a.7-4.1.2:1 [ 3.363497] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 3.363507] nouveau [ PTHERM][0000:01:00.0] fan management: disabled [ 3.363511] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 3.363656] [TTM] Zone kernel: Available graphics memory: 423566 kiB [ 3.363659] [TTM] Zone highmem: Available graphics memory: 2066834 kiB [ 3.363661] [TTM] Initializing pool allocator [ 3.363668] [TTM] Initializing DMA pool allocator [ 3.363682] nouveau [ DRM] VRAM: 512 MiB [ 3.363685] nouveau [ DRM] GART: 1048576 MiB [ 3.363691] nouveau [ DRM] TMDS table version 2.0 [ 3.363694] nouveau [ DRM] DCB version 4.0 [ 3.363699] nouveau [ DRM] DCB outp 00: 02000300 00000028 [ 3.363703] nouveau [ DRM] DCB outp 01: 01000302 00020030 [ 3.363706] nouveau [ DRM] DCB outp 02: 04011310 00000028 [ 3.363709] nouveau [ DRM] DCB outp 03: 02011312 00020030 [ 3.363712] nouveau [ DRM] DCB outp 04: 010223f1 00c0c083 [ 3.363715] nouveau [ DRM] DCB conn 00: 00001030 [ 3.363719] nouveau [ DRM] DCB conn 01: 00002130 [ 3.363723] nouveau [ DRM] DCB conn 02: 00000210 [ 3.363726] nouveau [ DRM] DCB conn 03: 00000211 [ 3.363729] nouveau [ DRM] DCB conn 04: 00000213 [ 3.373732] nouveau W[ DRM] failed to create encoder 0/1/0: -19 [ 3.373735] nouveau W[ DRM] TV-1 has no encoders, removing [ 3.373757] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.373759] [drm] No driver support for vblank timestamp query. [ 3.373871] nouveau [ DRM] 1 available performance level(s) [ 3.373875] nouveau [ DRM] 3: core 660MHz shader 1600MHz memory 900MHz fanspeed 100% [ 3.373878] nouveau [ DRM] c: core 399MHz shader 810MHz memory 499MHz voltage 1100mV [ 3.383981] nouveau [ DRM] MM: using CRYPT for buffer copies [ 3.450908] Switched to clocksource tsc [ 3.456066] nouveau [ DRM] allocated 1920x1080 fb: 0x70000, bo f64b3c00 [ 3.456147] fbcon: nouveaufb (fb0) is primary device [ 3.525744] Console: switching to colour frame buffer device 240x67 [ 3.530899] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 3.530902] nouveau 0000:01:00.0: registered panic notifier [ 3.530906] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0 [ 3.761581] PM: Starting manual resume from disk [ 3.761587] PM: Hibernation image partition 8:2 present [ 3.761589] PM: Looking for hibernation image. [ 3.763090] PM: Image not found (code -22) [ 3.763094] PM: Hibernation image not present or could not be loaded. [ 3.772634] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.772639] EXT4-fs (sda1): write access will be enabled during recovery [ 3.788161] firewire_core 0000:05:03.0: created device fw0: GUID 001e8c0001010037, S400 [ 3.877210] EXT4-fs (sda1): recovery complete [ 3.877676] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.977532] systemd-journald[80]: Received SIGTERM [ 4.025365] type=1404 audit(1387713380.985:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 4.193844] SELinux: 2048 avtab hash slots, 101316 rules. [ 4.215858] SELinux: 2048 avtab hash slots, 101316 rules. [ 4.235448] SELinux: 8 users, 83 roles, 4634 types, 265 bools, 1 sens, 1024 cats [ 4.235453] SELinux: 83 classes, 101316 rules [ 4.242579] SELinux: Completing initialization. [ 4.242583] SELinux: Setting up existing superblocks. [ 4.242591] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 4.242597] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 4.242613] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 4.242619] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 4.242633] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.242654] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 4.243496] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 4.244895] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 4.244900] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 4.244905] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 4.244909] SELinux: initialized (dev aio, type aio), not configured for labeling [ 4.244912] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 4.244932] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 4.244940] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 4.244947] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 4.244964] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 4.245543] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 4.245546] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.245551] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.245640] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.245671] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.245684] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts [ 4.245687] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.245695] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.245702] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.245714] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.245719] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.245725] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.245729] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.245741] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 4.245752] SELinux: initialized (dev sda1, type ext4), uses xattr [ 4.262106] type=1403 audit(1387713381.222:3): policy loaded auid=4294967295 ses=4294967295 [ 4.267006] systemd[1]: Successfully loaded SELinux policy in 243.642ms. [ 4.312695] systemd[1]: Relabelled /dev and /run in 22.730ms. [ 4.430246] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 4.430930] systemd-readahead[280]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 4.454533] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 4.455287] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.466622] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts [ 4.473414] systemd-journald[297]: Vacuuming done, freed 0 bytes [ 4.523113] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 4.525475] EXT4-fs (sda1): re-mounted. Opts: (null) [ 4.527290] systemd-udevd[314]: starting version 208 [ 4.639617] atl1 0000:02:00.0: version 2.1.3 [ 4.654761] Bluetooth: Core ver 2.16 [ 4.654780] NET: Registered protocol family 31 [ 4.654782] Bluetooth: HCI device and connection manager initialized [ 4.654790] Bluetooth: HCI socket layer initialized [ 4.654793] Bluetooth: L2CAP socket layer initialized [ 4.654799] Bluetooth: SCO socket layer initialized [ 4.662864] usbcore: registered new interface driver btusb [ 4.688136] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \SMRG 1 (20130725/utaddress-251) [ 4.688145] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.693886] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 4.701931] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6 [ 4.704367] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6 [ 4.705002] microcode: CPU0 updated to revision 0xba, date = 2010-10-03 [ 4.709973] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6 [ 4.710035] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6 [ 4.711002] microcode: CPU1 updated to revision 0xba, date = 2010-10-03 [ 4.715612] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6 [ 4.715661] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6 [ 4.716000] microcode: CPU2 updated to revision 0xba, date = 2010-10-03 [ 4.721691] ALSA sound/pci/hda/patch_realtek.c:419 SKU: Nid=0x1d sku_cfg=0x4015e601 [ 4.721695] ALSA sound/pci/hda/patch_realtek.c:421 SKU: port_connectivity=0x1 [ 4.721697] ALSA sound/pci/hda/patch_realtek.c:422 SKU: enable_pcbeep=0x1 [ 4.721699] ALSA sound/pci/hda/patch_realtek.c:423 SKU: check_sum=0x00000005 [ 4.721701] ALSA sound/pci/hda/patch_realtek.c:424 SKU: customization=0x000000e6 [ 4.721703] ALSA sound/pci/hda/patch_realtek.c:425 SKU: external_amp=0x0 [ 4.721705] ALSA sound/pci/hda/patch_realtek.c:426 SKU: platform_type=0x0 [ 4.721707] ALSA sound/pci/hda/patch_realtek.c:427 SKU: swap=0x0 [ 4.721708] ALSA sound/pci/hda/patch_realtek.c:428 SKU: override=0x1 [ 4.722368] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 4.722372] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.722374] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.722376] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 4.722378] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x1e/0x0 [ 4.722380] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 4.722382] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x19 [ 4.722385] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18 [ 4.722387] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a [ 4.722389] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d [ 4.722391] ALSA sound/pci/hda/patch_realtek.c:507 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0883 [ 4.732553] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6 [ 4.733391] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6 [ 4.737395] microcode: CPU3 updated to revision 0xba, date = 2010-10-03 [ 4.747800] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 4.758947] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 4.759388] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 4.759475] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 4.759550] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 4.759621] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.759721] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.759792] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 4.759862] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 4.763660] iTCO_vendor_support: vendor-support=0 [ 4.767691] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 4.767729] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) [ 4.774756] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.787187] systemd-udevd[343]: renamed network interface eth0 to em1 [ 4.796454] coretemp coretemp.0: Using relative temperature scale! [ 4.796473] coretemp coretemp.0: Using relative temperature scale! [ 4.796493] coretemp coretemp.0: Using relative temperature scale! [ 4.796515] coretemp coretemp.0: Using relative temperature scale! [ 4.811208] Adding 57196212k swap on /dev/sda2. Priority:-1 extents:1 across:57196212k SSFS [ 5.990446] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null) [ 5.990462] SELinux: initialized (dev sdb, type ext4), uses xattr [ 6.000252] systemd-journald[297]: Received request to flush runtime journal from PID 1 [ 6.010942] type=1305 audit(1387713382.970:4): audit_pid=401 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 6.214438] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.214443] Bluetooth: BNEP filters: protocol multicast [ 6.214453] Bluetooth: BNEP socket layer initialized [ 6.363601] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 6.397410] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.458283] Ebtables v2.0 registered [ 6.482177] Bridge firewalling registered [ 6.653278] cfg80211: Calling CRDA to update world regulatory domain [ 6.662373] cfg80211: World regulatory domain updated: [ 6.662378] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.662380] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.662382] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.662384] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.662386] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.662388] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.703752] atl1 0000:02:00.0: irq 46 for MSI/MSI-X [ 6.704916] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready [ 6.844448] atl1 0000:02:00.0: em1 link is up 1000 Mbps full duplex [ 6.844462] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready [ 16.702622] fuse init (API version 7.22) [ 16.707402] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 16.719145] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts [ 24.439072] Bluetooth: RFCOMM TTY layer initialized [ 24.439088] Bluetooth: RFCOMM socket layer initialized [ 24.439090] Bluetooth: RFCOMM ver 1.11 [ 36.368048] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 133.130391] perf samples too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 7080.782589] nouveau E[ PFIFO][0000:01:00.0] CACHE_ERROR - ch 7 [Anna[7914]] subc 0 mthd 0x0060 data 0xbeef0201 [ 7151.678580] warning: process `MetroLL' used the deprecated sysctl system call with 10.1. [ 7152.408808] MetroLL[8098]: segfault at 0 ip 08f1a809 sp bff37510 error 4 in MetroLL[8048000+1336000] [ 7208.835103] fm (8122): /proc/8177/oom_adj is deprecated, please use /proc/8177/oom_score_adj instead. [ 7283.219248] nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - ch 4 [gnome-shell[1368]] get 0x0020080cf4 put 0x0020081678 ib_get 0x000001c2 ib_put 0x000001c3 state 0x80000024 (err: INVALID_CMD) push 0x00406040 [ 7283.222138] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 0 - Unknown fault at address 004a9e0000 [ 7283.222144] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00002a00, e24: 00030000 [ 7283.222155] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 1 - Unknown fault at address 004a9e1200 [ 7283.222160] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 1 - e0c: 00000000, e18: 00000000, e1c: 00080010, e20: 00002a00, e24: 00030000 [ 7283.222170] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 2 - Unknown fault at address 004a9e2000 [ 7283.222174] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 2 - e0c: 00000000, e18: 00000000, e1c: 00000020, e20: 00002a00, e24: 00030000 [ 7283.222184] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 3 - Unknown fault at address 004a9e1400 [ 7283.222189] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 3 - e0c: 00000000, e18: 00000000, e1c: 0010001c, e20: 00002a00, e24: 00030000 [ 7283.222199] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 4 - Unknown fault at address 004a9e2400 [ 7283.222203] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 4 - e0c: 00000000, e18: 00000000, e1c: 00100020, e20: 00002a00, e24: 00030000 [ 7283.222212] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 5 - Unknown fault at address 004a9e3600 [ 7283.222216] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 5 - e0c: 00000000, e18: 00000000, e1c: 00180030, e20: 00002a00, e24: 00030000 [ 7283.222226] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 6 - Unknown fault at address 004a9e4400 [ 7283.222230] nouveau E[ PGRAPH][0000:01:00.0] TRAP_TPDMA_RT - TP 6 - e0c: 00000000, e18: 00000000, e1c: 00100040, e20: 00002a00, e24: 00030000 [ 7283.222234] nouveau E[ PGRAPH][0000:01:00.0] TRAP [ 7283.222242] nouveau E[ PGRAPH][0000:01:00.0] ch 4 [0x001fbe9000 gnome-shell[1368]] subc 3 class 0x8297 mthd 0x1ac4 data 0x24500001 [ 7283.222254] nouveau E[ PFB][0000:01:00.0] trapped write at 0x004a9e0000 on channel 0x0001fbe9 [gnome-shell[1368]] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT [ 7283.230968] nouveau E[ PFB][0000:01:00.0] trapped write at 0x004aa91900 on channel 0x0001fbe9 [gnome-shell[1368]] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT [ 7401.313131] usb 1-4.1.3: new high-speed USB device number 7 using ehci-pci [ 7401.387876] usb 1-4.1.3: New USB device found, idVendor=1bbb, idProduct=019b [ 7401.387883] usb 1-4.1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 7401.387886] usb 1-4.1.3: Product: MegaFon_SP-AI [ 7401.387890] usb 1-4.1.3: Manufacturer: MegaFon [ 7401.387893] usb 1-4.1.3: SerialNumber: 0123456789ABCDE [ 7401.462206] usb-storage 1-4.1.3:1.0: USB Mass Storage device detected [ 7401.463564] scsi10 : usb-storage 1-4.1.3:1.0 [ 7401.463708] usbcore: registered new interface driver usb-storage [ 7402.465797] scsi 10:0:0:0: Direct-Access MegaFon SP-AI 0000 PQ: 0 ANSI: 2 [ 7402.466166] scsi 10:0:0:1: Direct-Access MegaFon SP-AI 0000 PQ: 0 ANSI: 2 [ 7402.466708] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 7402.467252] sd 10:0:0:1: Attached scsi generic sg3 type 0 [ 7402.473287] sd 10:0:0:0: [sdc] Attached SCSI removable disk [ 7402.475150] sd 10:0:0:1: [sdd] Attached SCSI removable disk [28159.180118] nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - ch 7 [multiwinia.bin.[17032]] get 0x0020048fb0 put 0x0020049650 ib_get 0x000001a9 ib_put 0x000001aa state 0x80000024 (err: INVALID_CMD) push 0x00406040 [28161.317610] nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - ch 7 [multiwinia.bin.[17032]] get 0x002003ff68 put 0x00200405e8 ib_get 0x00000153 ib_put 0x00000154 state 0x80000024 (err: INVALID_CMD) push 0x00406040 [28164.156831] nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - ch 7 [multiwinia.bin.[17032]] get 0x0020164bc8 put 0x0020165248 ib_get 0x0000030e ib_put 0x0000030f state 0x80000024 (err: INVALID_CMD) push 0x00406040 [28282.019598] SELinux: initialized (dev proc, type proc), uses genfs_contexts