[ 1.907435] [drm:intel_dp_init_connector], Adding DP connector on port B [ 1.907625] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 1.908119] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010 [ 1.908609] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010 [ 1.909096] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010 [ 1.909580] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010 [ 1.910066] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010 [ 1.910078] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064 [ 1.910086] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.910567] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010 [ 1.911052] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010 [ 1.911536] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010 [ 1.912022] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010 [ 1.912506] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000010 [ 1.912527] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064 [ 1.912539] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.912911] [drm:intel_dp_init_connector], Adding eDP connector on port C [ 1.913059] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 1.913065] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 1.913073] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d [ 1.913204] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 1.923531] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 1.923662] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 1.934532] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 1.934573] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 1.934580] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0005 [ 1.934722] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 1.934727] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.934731] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.934734] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 1.934737] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 1.934744] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d [ 1.934999] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 1.945539] [drm:intel_dp_get_dpcd], DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 1.945690] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 1.956537] [drm:intel_dp_get_dpcd], Detected EDP PSR Panel. [ 1.956546] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f06 [ 1.956674] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 1.967673] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 1.978656] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 1.989671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.000655] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.011535] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 2.011662] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.022671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.033655] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.044670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.055670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.066670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.077671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.088670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.090288] asix 1-1:1.0 eth0: register 'asix' at usb-0000:00:14.0-1, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:95:30 [ 2.099690] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.110670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.121669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.132668] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.142531] tsc: Refined TSC clocksource calibration: 2133.332 MHz [ 2.143670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.154671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.165671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.176670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.187670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.198672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.209672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.220670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.231670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.242551] usb 1-2: new low-speed USB device number 3 using xhci_hcd [ 2.242672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.253672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.259062] usb 1-2: New USB device found, idVendor=0461, idProduct=0010 [ 2.259070] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.259077] usb 1-2: Product: USB Keyboard [ 2.259082] usb 1-2: Manufacturer: NOVATEK [ 2.259328] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.259339] usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.262602] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input4 [ 2.262835] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-2/input0 [ 2.264688] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.267630] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/input/input5 [ 2.267935] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-2/input1 [ 2.275691] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.286672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.297670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.308669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.319666] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.330670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.341671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.352671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.363670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.374673] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.385671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.396670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.407670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.418670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.420560] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 2.429674] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.431682] usb 1-6: New USB device found, idVendor=0424, idProduct=2640 [ 2.431692] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.432245] hub 1-6:1.0: USB hub found [ 2.432280] hub 1-6:1.0: 3 ports detected [ 2.440678] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.451672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.462672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.473670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.484671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.495670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.506670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.517670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.528670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.539672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.550670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.561670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.572670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.583669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.594669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.605670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.616670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.627670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.638672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.649672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.660672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.671670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.682672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.693670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.704682] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.705561] usb 1-6.1: new high-speed USB device number 5 using xhci_hcd [ 2.715673] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.723158] usb 1-6.1: New USB device found, idVendor=0424, idProduct=4040 [ 2.723167] usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.723175] usb 1-6.1: Product: Ultra Fast Media Reader [ 2.723181] usb 1-6.1: Manufacturer: Generic [ 2.723186] usb 1-6.1: SerialNumber: 000000264001 [ 2.723746] usb-storage 1-6.1:1.0: USB Mass Storage device detected [ 2.723854] scsi2 : usb-storage 1-6.1:1.0 [ 2.726689] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.737682] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.748669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.759669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.770669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.781669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.792668] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.796550] usb 1-6.2: new low-speed USB device number 6 using xhci_hcd [ 2.803669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.811743] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 2.811752] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.811759] usb 1-6.2: Product: USB Optical Mouse [ 2.811765] usb 1-6.2: Manufacturer: Logitech [ 2.811952] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.814236] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input6 [ 2.814689] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.814750] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 2.825687] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.836674] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.847671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.858670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.869670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.880670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.891669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.902670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.913670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.924670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.935670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.946670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.957670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.968669] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.979670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 2.990670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.001670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.012670] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.023672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.034672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.045672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.056672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.067672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.078672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.089671] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.100672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.111672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.122672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.133672] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.142629] Switched to clocksource tsc [ 3.144658] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.155659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.166660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.177660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.188660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.199660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.210660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.221660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.232660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.243660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.254660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.265660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.276660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.287660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.298660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.309660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.320659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.331660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.342659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.353660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.364660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.375660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.386659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.397659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.408659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.419660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.430659] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.441660] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.452644] [drm:valleyview_irq_handler], hotplug event received, stat 0x00000020 [ 3.463525] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 3.463540] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 3.463737] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 7812/7812, sysfs interface registered [ 3.463746] [drm:intel_dsi_init], [ 3.463751] [drm:intel_dsi_init], no device found [ 3.463761] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000] [ 3.466013] [drm:i915_gem_context_init], HW context support initialized [ 3.466035] [drm:init_status_page], render ring hws offset: 0x00001000 [ 3.466039] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 3.466043] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072 [ 3.467540] [drm:init_pipe_control], render ring pipe control offset: 0x00024000 [ 3.467554] [drm:init_status_page], bsd ring hws offset: 0x00025000 [ 3.467557] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 3.467561] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072 [ 3.467606] [drm:init_status_page], blitter ring hws offset: 0x00048000 [ 3.467610] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 3.467613] [drm:i915_pages_create_for_stolen], offset=0x40000, size=131072 [ 3.469522] [drm:valleyview_init_clock_gating], DDR speed: 1333 MHz [ 3.469541] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 3.471522] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 3.471527] [drm:intel_modeset_readout_hw_state], [CRTC:6] hw state readout: disabled [ 3.471532] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe A [ 3.471537] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe A [ 3.471541] [drm:intel_modeset_readout_hw_state], [ENCODER:15:TMDS-15] hw state readout: disabled, pipe A [ 3.471545] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A [ 3.471552] [drm:intel_dp_get_config], pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 3.471556] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: enabled, pipe A [ 3.471561] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:eDP-1] hw state readout: enabled [ 3.471565] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled [ 3.471569] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:HDMI-A-1] hw state readout: disabled [ 3.471573] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:DP-1] hw state readout: disabled [ 3.471577] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: disabled [ 3.471582] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 3.471585] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 3.471588] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 3.471592] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.471596] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.471599] [drm:intel_dump_pipe_config], requested mode: [ 3.471604] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 3.471606] [drm:intel_dump_pipe_config], adjusted mode: [ 3.471611] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 3.471615] [drm:intel_dump_crtc_timings], crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 3.471618] [drm:intel_dump_pipe_config], port clock: 270000 [ 3.471621] [drm:intel_dump_pipe_config], pipe src size: 1920x1080 [ 3.471625] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.471628] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.471631] [drm:intel_dump_pipe_config], ips: 0 [ 3.471633] [drm:intel_dump_pipe_config], double wide: 0 [ 3.471637] [drm:intel_dump_pipe_config], [CRTC:6][setup_hw_state] config for pipe B [ 3.471640] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 3.471643] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 3.471647] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.471650] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.471653] [drm:intel_dump_pipe_config], requested mode: [ 3.471657] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.471660] [drm:intel_dump_pipe_config], adjusted mode: [ 3.471664] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.471668] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.471671] [drm:intel_dump_pipe_config], port clock: 0 [ 3.471674] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 3.471677] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.471680] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.471683] [drm:intel_dump_pipe_config], ips: 0 [ 3.471686] [drm:intel_dump_pipe_config], double wide: 0 [ 3.471690] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 3.471696] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 3.471700] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 3.471704] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 3.471707] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 3.471711] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 3.471714] [drm:check_crtc_state], [CRTC:3] [ 3.473525] [drm:check_crtc_state], [CRTC:6] [ 3.473538] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] [ 3.473542] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 3.473701] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 3.484525] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 3.484678] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 3.495524] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 3.495536] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 3.495543] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes : [ 3.495548] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.495552] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 3.495556] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 3.495559] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 3.501519] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 3.501523] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.501676] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.501681] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.501684] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3.501687] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3.503799] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.503804] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3.503807] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.503810] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 3.503814] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 3.503818] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 3.503966] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 3.503970] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 3.503973] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 3.503977] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 3.503980] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 3.503984] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 3.503988] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 3.503991] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 3.504138] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.504142] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 3.504145] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 3.504149] [drm:drm_setup_crtcs], [ 3.504152] [drm:drm_enable_connectors], connector 20 enabled? yes [ 3.504155] [drm:drm_enable_connectors], connector 9 enabled? no [ 3.504158] [drm:drm_enable_connectors], connector 12 enabled? no [ 3.504161] [drm:drm_enable_connectors], connector 16 enabled? no [ 3.504164] [drm:drm_enable_connectors], connector 18 enabled? no [ 3.504167] [drm:drm_target_preferred], looking for cmdline mode on connector 20 [ 3.504170] [drm:drm_target_preferred], looking for preferred mode on connector 20 [ 3.504173] [drm:drm_target_preferred], found mode 1920x1080 [ 3.504176] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 3.504180] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3 [ 3.504185] [drm:intelfb_create], no BIOS fb, allocating a new one [ 3.504188] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000 [ 3.504196] [drm:i915_pages_create_for_stolen], offset=0x60000, size=8294400 [ 3.509087] [drm:intelfb_create], allocated 1920x1080 fb: 0x0006e000, bo ffff88000296e000 [ 3.509351] fbcon: inteldrmfb (fb0) is primary device [ 3.509464] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 3.509468] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 3.509469] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 3.509473] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.509477] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.509478] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 [ 3.509481] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.509485] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.509489] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains [ 3.509493] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 3.509502] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 24 [ 3.509504] [drm:intel_dp_compute_config], DP link bw required 333072 available 432000 [ 3.509507] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 3.509509] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 3.509523] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 3.509525] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 3.509528] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.509530] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.509532] [drm:intel_dump_pipe_config], requested mode: [ 3.509535] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.509536] [drm:intel_dump_pipe_config], adjusted mode: [ 3.509540] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.509543] [drm:intel_dump_crtc_timings], crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 3.509544] [drm:intel_dump_pipe_config], port clock: 270000 [ 3.509546] [drm:intel_dump_pipe_config], pipe src size: 1920x1080 [ 3.509548] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.509550] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.509551] [drm:intel_dump_pipe_config], ips: 0 [ 3.509552] [drm:intel_dump_pipe_config], double wide: 0 [ 3.517521] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 3.517524] [drm:ironlake_edp_backlight_off], [ 3.718664] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 3.725283] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 2.01 PQ: 0 ANSI: 0 [ 3.726392] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.729537] [drm:ironlake_edp_panel_off], Turn eDP power off [ 3.729540] [drm:ironlake_wait_panel_off], Wait for panel power off time [ 3.729544] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status c0000008 control abcd0008 [ 3.729667] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 4.257975] [drm:ironlake_wait_panel_status], Wait complete [ 4.275518] [drm:intel_dp_link_down], [ 4.327517] [drm:g4x_wait_for_vblank], vblank wait timed out [ 4.378527] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 4.420530] [drm:i9xx_update_plane], Writing base 0006E000 00000000 0 0 7680 [ 4.420534] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 4.420538] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080] [ 4.438524] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 4.438527] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 4.438529] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 4.438531] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 4.438536] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f06 [ 4.438771] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 4.449671] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 4.460668] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 4.485522] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 4.485679] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 4.496803] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 4.507530] [drm:intel_dp_start_link_train], clock recovery OK [ 4.507533] [drm:ironlake_edp_panel_on], Turn eDP power on [ 4.507535] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 4.507540] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008 [ 4.507542] [drm:ironlake_wait_panel_status], Wait complete [ 4.507546] [drm:ironlake_wait_panel_on], Wait for panel power on [ 4.507550] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b [ 4.661667] [drm:ironlake_wait_panel_status], Wait complete [ 4.661671] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 4.661677] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 4.661836] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 4.673108] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 4.683534] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful [ 4.683674] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 4.694587] [drm:g4x_check_srwm], SR watermark: display plane 107, cursor 6 [ 4.694590] [drm:g4x_check_srwm], SR watermark: display plane 211, cursor 10 [ 4.694595] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=2, cursor=2, SR: plane=107, cursor=10 [ 4.704531] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000 [ 4.704538] [drm:i915_pages_create_for_stolen], offset=0x3efa000, size=24576 [ 4.704552] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 4.706530] [drm:valleyview_enable_rps], GPLL enabled? yes [ 4.706533] [drm:valleyview_enable_rps], GPU status: 0x0000c590 [ 4.706536] [drm:valleyview_enable_rps], current GPU freq: 292 MHz (197) [ 4.708530] [drm:valleyview_enable_rps], max GPU freq: 708 MHz (217) [ 4.712527] [drm:valleyview_enable_rps], RPe GPU freq: 375 MHz (201) [ 4.714529] [drm:valleyview_enable_rps], min GPU freq: 167 MHz (191) [ 4.714532] [drm:valleyview_enable_rps], setting GPU freq to 375 MHz (201) [ 4.714535] [drm:valleyview_set_rps], GPU freq request from 292 MHz (197) to 375 MHz (201) [ 4.728518] [drm:ironlake_edp_backlight_on], [ 4.730521] [drm:intel_panel_enable_backlight], pipe A [ 4.730525] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7812 [ 4.730532] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 4.730537] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 4.730539] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 4.730541] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 4.730544] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 4.730546] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 4.730548] [drm:check_crtc_state], [CRTC:3] [ 4.732524] [drm:check_crtc_state], [CRTC:6] [ 4.732529] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 4.732532] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 4.732535] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.732543] Console: switching to colour frame buffer device 240x67 [ 4.732557] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.732559] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.732562] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.747542] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.747613] i915 0000:00:02.0: registered panic notifier [ 4.753550] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.754997] acpi device:20: registered as cooling_device3 [ 4.755847] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 4.756190] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.764701] dracut: Starting plymouth daemon [ 4.778457] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.778463] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.778466] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.798795] [drm:i915_gem_open], [ 4.798842] [drm:intel_crtc_cursor_set], cursor off [ 4.798848] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.798856] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.798861] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.798865] [drm:intel_crtc_cursor_set], cursor off [ 4.798868] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 4.798871] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 4.798875] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.798897] [drm:i915_gem_open], [ 4.798922] [drm:intel_crtc_cursor_set], cursor off [ 4.798926] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.798930] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.798935] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.798938] [drm:intel_crtc_cursor_set], cursor off [ 4.798941] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 4.798944] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 4.798948] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.798965] [drm:i915_gem_open], [ 4.799433] [drm:intel_crtc_cursor_set], cursor off [ 4.799439] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.799444] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.799449] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.799452] [drm:intel_crtc_cursor_set], cursor off [ 4.799455] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 4.799459] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 4.799462] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.799955] dracut: error: unexpectedly disconnected from boot status daemon [ 4.810440] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.810445] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.810449] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.964443] ACPI: AC Adapter [ADP1] (on-line) [ 4.975606] ACPI: Battery Slot [BAT0] (battery present) [ 4.975740] ACPI: Battery Slot [BAT1] (battery absent) [ 5.037332] snd_hda_intel 0000:00:1b.0: irq 106 for MSI/MSI-X [ 5.040481] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 5.070151] ALSA sound/pci/hda/patch_realtek.c:419 SKU: Nid=0x1d sku_cfg=0x4014c601 [ 5.070156] ALSA sound/pci/hda/patch_realtek.c:421 SKU: port_connectivity=0x1 [ 5.070159] ALSA sound/pci/hda/patch_realtek.c:422 SKU: enable_pcbeep=0x1 [ 5.070162] ALSA sound/pci/hda/patch_realtek.c:423 SKU: check_sum=0x00000004 [ 5.070165] ALSA sound/pci/hda/patch_realtek.c:424 SKU: customization=0x000000c6 [ 5.070168] ALSA sound/pci/hda/patch_realtek.c:425 SKU: external_amp=0x0 [ 5.070171] ALSA sound/pci/hda/patch_realtek.c:426 SKU: platform_type=0x0 [ 5.070174] ALSA sound/pci/hda/patch_realtek.c:427 SKU: swap=0x0 [ 5.070177] ALSA sound/pci/hda/patch_realtek.c:428 SKU: override=0x1 [ 5.071306] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 5.071311] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.071315] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.071318] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 5.071321] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 5.071325] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x19 [ 5.071329] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18 [ 5.071332] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a [ 5.071336] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x4014c601 for NID 0x1d [ 5.071340] ALSA sound/pci/hda/patch_realtek.c:507 realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0262 [ 5.127161] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 5.127167] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 5.127170] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 5.156294] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 5.198063] dracut: Checking ext4: /dev/sda4 [ 5.198462] dracut: issuing e2fsck -a /dev/sda4 [ 5.207264] dracut: /dev/sda4: clean, 513594/3276800 files, 11040306/13107200 blocks [ 5.208410] dracut: Remounting /dev/sda4 with -o ro [ 5.214895] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 5.221329] dracut: Mounted root filesystem /dev/sda4 [ 5.244061] device-mapper: uevent: version 1.0.3 [ 5.244452] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 5.282022] dracut: Switching root [ 5.333604] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 5.340042] systemd[1]: Failed to insert module 'ipv6' [ 5.340386] systemd[1]: Set hostname to . [ 5.341886] random: systemd urandom read with 102 bits of entropy available [ 5.365292] LVM: Logical Volume autoactivation enabled. [ 5.365366] LVM: Activation generator successfully completed. [ 5.418472] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 5.418723] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.418839] systemd[1]: Starting Syslog Socket. [ 5.419093] systemd[1]: Listening on Syslog Socket. [ 5.422952] systemd[1]: Starting Replay Read-Ahead Data... [ 5.431399] systemd[1]: Starting Collect Read-Ahead Data... [ 5.433777] systemd-readahead[2190]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 5.443931] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 5.445895] systemd-readahead[2191]: Failed to create fanotify object: Function not implemented [ 5.456600] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.460725] systemd[1]: Starting Delayed Shutdown Socket. [ 5.469452] systemd[1]: Listening on Delayed Shutdown Socket. [ 5.473701] systemd[1]: Starting udev Kernel Socket. [ 5.482387] systemd[1]: Listening on udev Kernel Socket. [ 5.486561] systemd[1]: Starting udev Control Socket. [ 5.491857] random: nonblocking pool is initialized [ 5.499077] systemd[1]: Listening on udev Control Socket. [ 5.503117] systemd[1]: Starting Encrypted Volumes. [ 5.511352] systemd[1]: Reached target Encrypted Volumes. [ 5.515358] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 5.523910] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.528011] systemd[1]: Starting Journal Socket. [ 5.536523] systemd[1]: Listening on Journal Socket. [ 5.540706] systemd[1]: Starting Create static device nodes in /dev... [ 5.550176] systemd[1]: Mounting POSIX Message Queue File System... [ 5.561192] systemd[1]: Starting udev Coldplug all Devices... [ 5.570255] systemd[1]: Mounting Debug File System... [ 5.579466] systemd[1]: Starting Journal Service... [ 5.596197] systemd[1]: Started Journal Service. [ 5.600389] systemd[1]: Mounting Huge Pages File System... [ 5.609091] systemd[1]: Starting LVM2 metadata daemon socket. [ 5.619835] systemd[1]: Listening on LVM2 metadata daemon socket. [ 5.623778] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 5.631901] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 5.635842] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 5.644777] systemd[1]: Expecting device dev-disk-by\x2duuid-1a1b79a3\x2d6d33\x2d48d2\x2da27e\x2d1b5805d88291.device... [ 5.653188] systemd[1]: Mounting Temporary Directory... [ 5.663568] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 5.668354] systemd[1]: Expecting device dev-disk-by\x2duuid-ABCD\x2d535B.device... [ 5.677589] systemd[1]: Expecting device dev-disk-by\x2duuid-0a7e090c\x2dd2b9\x2d498e\x2dbc0d\x2d05c33717cb8c.device... [ 5.686335] systemd[1]: Expecting device dev-disk-by\x2duuid-d79f918f\x2d693d\x2d4480\x2d91cf\x2d6840792221db.device... [ 5.700201] systemd[1]: Started Replay Read-Ahead Data. [ 5.704674] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE [ 5.713826] systemd[1]: Started Collect Read-Ahead Data. [ 5.723395] systemd[1]: Started Create static device nodes in /dev. [ 5.732822] systemd[1]: Mounted POSIX Message Queue File System. [ 5.742596] systemd[1]: Mounted Debug File System. [ 5.751681] systemd[1]: Mounted Huge Pages File System. [ 5.760584] systemd[1]: Mounted Temporary Directory. [ 5.764981] systemd[1]: Starting udev Kernel Device Manager... [ 5.774577] systemd[1]: Starting Load legacy module configuration... [ 5.778225] systemd-udevd[2575]: starting version 204 [ 5.788326] systemd[1]: Started File System Check on Root Device. [ 5.794893] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.808458] systemd[1]: Started Load Kernel Modules. [ 5.816639] systemd[1]: Mounting FUSE Control File System... [ 5.826349] systemd[1]: Mounted Configuration File System. [ 5.831477] EXT4-fs (sda4): re-mounted. Opts: (null) [ 5.836647] systemd[1]: Started Set Up Additional Binary Formats. [ 5.841005] systemd[1]: Starting Setup Virtual Console... [ 5.852991] systemd[1]: Starting Apply Kernel Variables... [ 5.870050] systemd[1]: Started udev Kernel Device Manager. [ 5.880415] systemd[1]: Mounted FUSE Control File System. [ 5.885698] systemd[1]: Starting LVM2 metadata daemon... [ 5.900452] systemd[1]: Started Load legacy module configuration. [ 5.909393] systemd[1]: Started Remount Root and Kernel File Systems. [ 5.921106] systemd[1]: Started Apply Kernel Variables. [ 5.925411] systemd[1]: Starting Local File Systems (Pre). [ 5.938956] systemd[1]: Reached target Local File Systems (Pre). [ 5.943224] systemd[1]: Starting Configure read-only root support... [ 5.955293] systemd[1]: Started Import network configuration from initramfs. [ 5.972427] systemd[1]: Started LVM2 metadata daemon. [ 5.993070] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 6.000774] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 6.000779] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 6.000783] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 6.022050] systemd[1]: Started Configure read-only root support. [ 6.027113] systemd[1]: Starting Load Random Seed... [ 6.045587] systemd[1]: Started Setup Virtual Console. [ 6.055360] systemd[1]: Started Load Random Seed. [ 6.124411] systemd[1]: Starting Sound Card. [ 6.134475] systemd[1]: Reached target Sound Card. [ 6.148669] systemd[1]: Started udev Coldplug all Devices. [ 6.152617] systemd[1]: Starting Show Plymouth Boot Screen... [ 6.221577] [drm:i915_gem_open], [ 6.221625] [drm:intel_crtc_cursor_set], cursor off [ 6.221632] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 6.221638] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 6.221644] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 6.221648] [drm:intel_crtc_cursor_set], cursor off [ 6.221651] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 6.221655] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 6.221658] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 6.221681] [drm:i915_gem_open], [ 6.221707] [drm:intel_crtc_cursor_set], cursor off [ 6.221712] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 6.221716] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 6.221720] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 6.221723] [drm:intel_crtc_cursor_set], cursor off [ 6.221726] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 6.221730] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 6.221733] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 6.221752] [drm:i915_gem_open], [ 6.221845] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 6.221852] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 6.221863] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 6.221868] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] [ 6.221873] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 6.221878] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 6.221884] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 6.222047] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 6.232612] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 6.232775] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 6.244044] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 6.244066] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 6.244073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes : [ 6.244079] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 6.244093] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 6.251749] Adding 3964924k swap on /dev/sda3. Priority:-1 extents:1 across:3964924k SS [ 6.281242] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 6.281252] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 6.281257] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 6.281262] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 6.286550] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 6.286556] [drm:intel_crt_detect], CRT not detected via hotplug [ 6.286716] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 6.286721] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 6.286724] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 6.286727] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 6.288818] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 6.288827] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 6.288830] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 6.288836] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 6.288850] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 6.288854] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 6.288858] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 6.288862] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 6.295634] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 6.295641] [drm:intel_crt_detect], CRT not detected via hotplug [ 6.295879] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 6.295885] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 6.295888] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 6.295891] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 6.297822] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 6.297830] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 6.297834] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 6.297839] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 6.297859] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 6.297864] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 6.297868] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 6.298033] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 6.298038] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 6.298043] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 6.298051] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 6.298054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 6.298073] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 6.298241] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 6.298246] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 6.298250] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 6.298262] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 6.298266] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 6.298270] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 6.298275] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 6.298279] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 6.298283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 6.298286] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 6.298290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 6.298296] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 6.298299] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 6.298303] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 6.298472] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 6.298477] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 6.298481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 6.298488] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 6.298492] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 6.298495] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 6.298646] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 6.298651] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 6.298655] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 6.298685] [drm:drm_mode_addfb], [FB:27] [ 6.317641] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 6.342679] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 6.358942] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 6.368062] systemd-udevd[2594]: renamed network interface eth0 to enp0s20u1 [ 6.406932] type=1305 audit(978307884.404:2): audit_pid=3031 old=0 auid=4294967295 ses=4294967295 res=1 [ 6.501406] systemd[1]: Unit rngd.service entered failed state. [ 6.540074] traps: alsactl[3047] general protection ip:372f048c39 sp:7fff87080cf0 error:0 in libc-2.17.so[372f000000+1b5000] [ 7.665200] asix 1-1:1.0 enp0s20u1: link down [ 9.248528] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 9.248538] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 9.330186] asix 1-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0x43E1 [ 10.921286] [drm:intel_crtc_cursor_set], cursor off [ 10.921296] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 10.921303] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 10.921308] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 10.921312] [drm:intel_crtc_cursor_set], cursor off [ 10.921315] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 10.921319] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 10.921323] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 11.729861] Ebtables v2.0 registered [ 11.817087] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.933365] NET: Registered protocol family 10 [ 11.959992] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 62.833285] usb 1-6.2: USB disconnect, device number 6 [ 64.290040] usb 1-6.2: new low-speed USB device number 7 using xhci_hcd [ 64.308534] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 64.308872] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 64.309208] usb 1-6.2: Product: USB Optical Mouse [ 64.309429] usb 1-6.2: Manufacturer: Logitech [ 64.310167] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 64.312814] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input9 [ 64.313351] hid-generic 0003:046D:C05A.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 124.529274] usb 1-6.2: USB disconnect, device number 7 [ 125.986012] usb 1-6.2: new low-speed USB device number 8 using xhci_hcd [ 126.004538] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 126.004879] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 126.005214] usb 1-6.2: Product: USB Optical Mouse [ 126.005502] usb 1-6.2: Manufacturer: Logitech [ 126.007508] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 126.011685] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input10 [ 126.013158] hid-generic 0003:046D:C05A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 186.225257] usb 1-6.2: USB disconnect, device number 8 [ 187.681956] usb 1-6.2: new low-speed USB device number 9 using xhci_hcd [ 187.700563] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 187.700904] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 187.701239] usb 1-6.2: Product: USB Optical Mouse [ 187.701527] usb 1-6.2: Manufacturer: Logitech [ 187.703392] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 187.708917] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input11 [ 187.709611] hid-generic 0003:046D:C05A.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 247.921265] usb 1-6.2: USB disconnect, device number 9 [ 249.377902] usb 1-6.2: new low-speed USB device number 10 using xhci_hcd [ 249.396519] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 249.396860] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 249.397196] usb 1-6.2: Product: USB Optical Mouse [ 249.397485] usb 1-6.2: Manufacturer: Logitech [ 249.398902] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 249.402256] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input12 [ 249.403851] hid-generic 0003:046D:C05A.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 291.391928] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000800 [ 291.391951] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 1 - cnt: 0 [ 291.392045] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 291.392066] [drm:i915_hotplug_work_func], Connector VGA-1 (pin 1) received hotplug event. [ 291.392084] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=0 [ 291.392098] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40000 [ 291.397372] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0x3f40000, result 1 [ 291.397388] [drm:intel_crt_detect], CRT detected via hotplug [ 291.397405] [drm:intel_hpd_irq_event], [CONNECTOR:9:VGA-1] status updated from disconnected to connected [ 291.398790] [drm:drm_fb_helper_hotplug_event], [ 291.398812] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] [ 291.398828] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 291.398844] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 291.398863] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 291.399056] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 291.409354] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 291.409514] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 291.420345] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 291.420364] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 291.420371] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes : [ 291.420377] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 291.420382] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 291.420386] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 291.420390] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0x3f40000 [ 291.426336] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0x3f40000, result 1 [ 291.426340] [drm:intel_crt_detect], CRT detected via hotplug [ 291.438765] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 159 [ 291.438865] Raw EDID: [ 291.438895] 00 ff ff ff ff ff ff 00 04 69 b1 23 4b 0c 01 00 [ 291.438960] 10 17 01 03 68 33 1d 78 2a 5e a5 a2 55 4d a0 26 [ 291.439025] 11 50 54 bf ef 00 d1 c0 95 00 81 40 81 80 81 c0 [ 291.439090] 95 0f b3 00 71 4f 02 3a 80 18 71 38 2d 40 58 2c [ 291.439155] 45 00 fd 1e 11 00 00 1e 00 00 00 ff 00 44 34 4c [ 291.439220] 4d 54 46 30 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.439284] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.439361] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.451379] Raw EDID: [ 291.451413] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.451478] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.451543] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.451608] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.451673] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.451738] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.451803] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.451868] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.463883] Raw EDID: [ 291.463916] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.463981] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.464046] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.467613] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.471151] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.474631] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.478051] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.481429] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.496713] Raw EDID: [ 291.500012] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.503344] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.506631] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.509870] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.513068] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.516232] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.519348] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.522440] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 291.525476] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 291.528457] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 291.528463] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 291.530617] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 291.530622] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 291.530639] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes : [ 291.530646] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 291.530651] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 291.530656] [drm:drm_mode_debug_printmodeline], Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 291.530661] [drm:drm_mode_debug_printmodeline], Modeline 30:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 291.530666] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 291.530671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 291.530675] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 291.530825] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 291.530829] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 291.530833] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 291.530837] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 291.530841] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 291.530845] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 291.530849] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 291.530852] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 291.530999] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 291.531002] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 291.531006] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 291.531010] [drm:drm_setup_crtcs], [ 291.531014] [drm:drm_enable_connectors], connector 20 enabled? yes [ 291.531017] [drm:drm_enable_connectors], connector 9 enabled? yes [ 291.531020] [drm:drm_enable_connectors], connector 12 enabled? no [ 291.531023] [drm:drm_enable_connectors], connector 16 enabled? no [ 291.531026] [drm:drm_enable_connectors], connector 18 enabled? no [ 291.531029] [drm:drm_target_preferred], looking for cmdline mode on connector 20 [ 291.531032] [drm:drm_target_preferred], looking for preferred mode on connector 20 [ 291.531035] [drm:drm_target_preferred], found mode 1920x1080 [ 291.531038] [drm:drm_target_preferred], looking for cmdline mode on connector 9 [ 291.531041] [drm:drm_target_preferred], looking for preferred mode on connector 9 [ 291.531044] [drm:drm_target_preferred], found mode 1024x768 [ 291.531047] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 291.531054] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3 [ 291.531059] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 6 [ 291.531065] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 291.531070] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 291.531074] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 291.531079] [drm:intel_crtc_set_config], [CRTC:6] [FB:26] #connectors=1 (x y) (0 0) [ 291.531082] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 291.531085] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 291.531090] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 291.531095] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 291.531098] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=1, fb_changed=0 [ 291.531101] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 291.531105] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 291.531109] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6] [ 291.531111] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 291.531116] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 291.531121] [drm:connected_sink_compute_bpp], [CONNECTOR:9:VGA-1] checking for sink bpp constrains [ 291.531125] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 291.531129] [drm:intel_dump_pipe_config], [CRTC:6][modeset] config for pipe B [ 291.531132] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 291.531135] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 291.531139] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 291.531142] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 291.531145] [drm:intel_dump_pipe_config], requested mode: [ 291.531150] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 291.531153] [drm:intel_dump_pipe_config], adjusted mode: [ 291.531158] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 291.531162] [drm:intel_dump_crtc_timings], crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa [ 291.531165] [drm:intel_dump_pipe_config], port clock: 65000 [ 291.531168] [drm:intel_dump_pipe_config], pipe src size: 1024x768 [ 291.531172] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 291.531175] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 291.531178] [drm:intel_dump_pipe_config], ips: 0 [ 291.531181] [drm:intel_dump_pipe_config], double wide: 0 [ 291.584346] [drm:i9xx_update_plane], Writing base 0006E000 00000000 0 0 7680 [ 291.584359] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 291.584364] [drm:intel_crtc_mode_set], [ENCODER:10:DAC-10] set [MODE:0:1024x768] [ 291.585021] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=150, cursor=6, SR: plane=0, cursor=0 [ 291.602341] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 291.602347] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1] [ 291.602353] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 291.602357] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 291.602361] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 291.602364] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 291.602368] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 291.602371] [drm:check_crtc_state], [CRTC:3] [ 291.604343] [drm:check_crtc_state], [CRTC:6] [ 294.424496] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 294.424505] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 309.617320] usb 1-6.2: USB disconnect, device number 10 [ 311.073861] usb 1-6.2: new low-speed USB device number 11 using xhci_hcd [ 311.094413] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 311.098378] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 311.101235] usb 1-6.2: Product: USB Optical Mouse [ 311.104076] usb 1-6.2: Manufacturer: Logitech [ 311.108430] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 311.114635] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input13 [ 311.118225] hid-generic 0003:046D:C05A.0008: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 371.313229] usb 1-6.2: USB disconnect, device number 11 [ 372.770336] usb 1-6.2: new low-speed USB device number 12 using xhci_hcd [ 372.791502] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 372.795256] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 372.797984] usb 1-6.2: Product: USB Optical Mouse [ 372.800734] usb 1-6.2: Manufacturer: Logitech [ 372.806619] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 372.812979] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input14 [ 372.816513] hid-generic 0003:046D:C05A.0009: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 392.541897] [drm:i915_gem_open], [ 392.541953] [drm:intel_crtc_cursor_set], cursor off [ 392.541960] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 392.541967] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 392.541972] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 392.541976] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6] [ 392.541980] [drm:intel_crtc_cursor_set], cursor off [ 392.541984] [drm:intel_crtc_set_config], [CRTC:6] [FB:26] #connectors=1 (x y) (0 0) [ 392.541988] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 392.541992] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 392.541996] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6] [ 392.542016] [drm:i915_gem_open], [ 392.542141] [drm:valleyview_set_rps], GPU freq request from 375 MHz (201) to 708 MHz (217) [ 392.543289] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 375 MHz (201) [ 392.543774] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 392.543789] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 392.543809] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 392.543814] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 392.543823] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 392.543829] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] [ 392.543834] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 392.543839] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 392.543845] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 392.544009] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 392.554280] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 392.554436] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 392.565279] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 392.565297] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 392.565304] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes : [ 392.565310] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 392.565321] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 392.565337] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 392.565343] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 392.565375] [drm:drm_mode_addfb], [FB:33] [ 392.640420] [drm:drm_mode_setcrtc], [CRTC:3] [ 392.640432] [drm:drm_mode_setcrtc], [CONNECTOR:20:eDP-1] [ 392.640438] [drm:intel_crtc_set_config], [CRTC:3] [FB:33] #connectors=1 (x y) (0 0) [ 392.640443] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 392.640449] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 392.640455] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0 [ 392.640458] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=1 [ 392.640463] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 392.640466] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6] [ 392.640472] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 392.640478] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains [ 392.640484] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 392.640496] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 24 [ 392.640499] [drm:intel_dp_compute_config], DP link bw required 333072 available 432000 [ 392.640504] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 392.640508] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 392.640511] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 392.640514] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 392.640518] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 392.640522] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 392.640525] [drm:intel_dump_pipe_config], requested mode: [ 392.640530] [drm:drm_mode_debug_printmodeline], Modeline 0:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0 [ 392.640532] [drm:intel_dump_pipe_config], adjusted mode: [ 392.640537] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 392.640542] [drm:intel_dump_crtc_timings], crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 392.640545] [drm:intel_dump_pipe_config], port clock: 270000 [ 392.640548] [drm:intel_dump_pipe_config], pipe src size: 800x600 [ 392.640552] [drm:intel_dump_pipe_config], gmch pfit: control: 0x88000000, ratios: 0x00000000, lvds border: 0x00000000 [ 392.640555] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 392.640558] [drm:intel_dump_pipe_config], ips: 0 [ 392.640561] [drm:intel_dump_pipe_config], double wide: 0 [ 392.643280] [drm:valleyview_set_rps], GPU freq request from 375 MHz (201) to 167 MHz (191) [ 392.650276] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 392.650282] [drm:ironlake_edp_backlight_off], [ 392.851999] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 392.862336] [drm:ironlake_edp_panel_off], Turn eDP power off [ 392.862356] [drm:ironlake_wait_panel_off], Wait for panel power off time [ 392.862377] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status e0000003 control abcd0008 [ 393.478717] [drm:ironlake_wait_panel_status], Wait complete [ 393.506273] [drm:intel_dp_link_down], [ 393.558272] [drm:g4x_wait_for_vblank], vblank wait timed out [ 393.609739] [drm:g4x_check_srwm], SR watermark: display plane 51, cursor 6 [ 393.609761] [drm:g4x_check_srwm], SR watermark: display plane 100, cursor 10 [ 393.609779] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=150, cursor=6, SR: plane=51, cursor=10 [ 393.637283] [drm:i9xx_update_plane], Writing base 0085C000 00000000 0 0 3200 [ 393.637290] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 393.637296] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:800x600] [ 393.655274] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 393.655279] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 393.655283] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 393.655286] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 393.655292] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f06 [ 393.655521] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.666424] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.677422] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.702271] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 393.702523] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.713625] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.724282] [drm:intel_dp_start_link_train], clock recovery OK [ 393.724286] [drm:ironlake_edp_panel_on], Turn eDP power on [ 393.724290] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 393.724295] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008 [ 393.724298] [drm:ironlake_wait_panel_status], Wait complete [ 393.724302] [drm:ironlake_wait_panel_on], Wait for panel power on [ 393.724307] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b [ 393.808748] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191) [ 393.878691] [drm:ironlake_wait_panel_status], Wait complete [ 393.878716] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 393.878736] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 393.879010] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.889855] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.914271] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 393.914420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.925853] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.950270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 393.950419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.961853] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.986270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 393.986419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 393.997853] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.022270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.022419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.033854] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.058270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.058420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.069852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.094270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.094419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.105852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.116280] [drm:intel_dp_link_down], [ 394.168272] [drm:g4x_wait_for_vblank], vblank wait timed out [ 394.219629] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.230423] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.255271] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.255428] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.266554] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.277279] [drm:intel_dp_start_link_train], clock recovery OK [ 394.277435] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.288852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.313270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.313419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.324852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.349270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.349419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.360852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.385270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.385419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.396853] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.421270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.421419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.432852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.457270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.457419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.468852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.493271] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.493421] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.504852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.515279] [drm:intel_dp_link_down], [ 394.567271] [drm:g4x_wait_for_vblank], vblank wait timed out [ 394.618995] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.629423] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.654270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.654521] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.665552] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.676279] [drm:intel_dp_start_link_train], clock recovery OK [ 394.676435] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.687852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.712542] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191) [ 394.712609] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.712760] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.723851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.748270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.748420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.759850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.784270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.784420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.795848] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.820272] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.820422] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.831851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.856270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.856419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.867851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.892270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 394.892420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.903851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 394.914279] [drm:intel_dp_link_down], [ 394.966272] [drm:g4x_wait_for_vblank], vblank wait timed out [ 395.018013] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.028491] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.053270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.053430] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.064552] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.075278] [drm:intel_dp_start_link_train], clock recovery OK [ 395.075436] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.086851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.111269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.111419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.122851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.147270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.147524] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.158853] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.183269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.183419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.194851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.219270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.219419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.230850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.255269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.255419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.266851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.291269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.291419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.302850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.313278] [drm:intel_dp_link_down], [ 395.365271] [drm:g4x_wait_for_vblank], vblank wait timed out [ 395.417023] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.427421] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.452270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.452429] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.463552] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.474278] [drm:intel_dp_start_link_train], clock recovery OK [ 395.474435] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.485851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.510269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.510419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.521850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.546270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.546420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.557851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.582269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.582514] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.593851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.618269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.618419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.629850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.654269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.654419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.665850] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.690269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.690419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.701852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.712281] [drm:intel_dp_link_down], [ 395.764269] [drm:g4x_wait_for_vblank], vblank wait timed out [ 395.815981] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.826417] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.851272] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.851429] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.862552] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.873278] [drm:intel_dp_start_link_train], clock recovery OK [ 395.873434] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.884851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.909269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.909418] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.920851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.945269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.945418] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.956851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.981269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 395.981418] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 395.992852] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.017270] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 396.017419] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.028851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.053269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 396.053418] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.064854] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.089269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 396.089418] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.100851] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.111278] [drm:intel_dp_link_down], [ 396.163271] [drm:g4x_wait_for_vblank], vblank wait timed out [ 396.215019] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.225422] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.250269] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 396.250427] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.261552] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.272278] [drm:intel_dp_start_link_train], clock recovery OK [ 396.272434] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.283277] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting [ 396.283283] [drm:intel_dp_link_down], [ 396.335271] [drm:g4x_wait_for_vblank], vblank wait timed out [ 396.387021] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 396.397329] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=201, cursor=6, B: plane=150, cursor=6, SR: plane=0, cursor=0 [ 396.431271] [drm:ironlake_edp_backlight_on], [ 396.433273] [drm:intel_panel_enable_backlight], pipe A [ 396.433278] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7812 [ 396.433287] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 396.433292] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1] [ 396.433299] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 396.433303] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 396.433307] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 396.433310] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 396.433314] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 396.433318] [drm:check_crtc_state], [CRTC:3] [ 396.435276] [drm:check_crtc_state], [CRTC:6] [ 396.437306] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 396.437315] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 396.437324] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 396.437329] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 396.437334] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 396.437337] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xc3f40000 [ 396.447269] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xc3f40000, result 1 [ 396.447273] [drm:intel_crt_detect], CRT detected via hotplug [ 396.459728] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 396.459749] [drm:drm_mode_debug_printmodeline], Modeline 30:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 396.459752] [drm:drm_mode_prune_invalid], Not using 848x480 mode -3 [ 396.459758] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 396.459761] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3 [ 396.459769] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes : [ 396.459775] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 396.459780] [drm:drm_mode_debug_printmodeline], Modeline 41:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 396.459785] [drm:drm_mode_debug_printmodeline], Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 396.459790] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 396.459795] [drm:drm_mode_debug_printmodeline], Modeline 40:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 [ 396.459800] [drm:drm_mode_debug_printmodeline], Modeline 36:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 396.459805] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 396.459810] [drm:drm_mode_debug_printmodeline], Modeline 42:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 396.459815] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6 [ 396.459821] [drm:drm_mode_debug_printmodeline], Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 396.459826] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 396.459831] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 396.459836] [drm:drm_mode_debug_printmodeline], Modeline 54:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 396.459841] [drm:drm_mode_debug_printmodeline], Modeline 55:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 396.459846] [drm:drm_mode_debug_printmodeline], Modeline 56:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 396.459851] [drm:drm_mode_debug_printmodeline], Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 396.459856] [drm:drm_mode_debug_printmodeline], Modeline 28:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 396.459861] [drm:drm_mode_debug_printmodeline], Modeline 45:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 396.459866] [drm:drm_mode_debug_printmodeline], Modeline 46:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 396.459871] [drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 396.459876] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 396.459881] [drm:drm_mode_debug_printmodeline], Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 396.459893] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 396.459911] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 396.459917] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 396.459949] [drm:drm_mode_addfb], [FB:27] [ 396.521088] [drm:drm_mode_setcrtc], [CRTC:6] [ 396.521100] [drm:drm_mode_setcrtc], [CONNECTOR:9:VGA-1] [ 396.521106] [drm:intel_crtc_set_config], [CRTC:6] [FB:27] #connectors=1 (x y) (0 0) [ 396.521111] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 396.521117] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 396.521122] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0 [ 396.521126] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=1, fb_changed=1 [ 396.521131] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 396.521135] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6] [ 396.521140] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 396.521145] [drm:connected_sink_compute_bpp], [CONNECTOR:9:VGA-1] checking for sink bpp constrains [ 396.521150] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 396.521154] [drm:intel_dump_pipe_config], [CRTC:6][modeset] config for pipe B [ 396.521156] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 396.521159] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 396.521163] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 396.521167] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 396.521170] [drm:intel_dump_pipe_config], requested mode: [ 396.521175] [drm:drm_mode_debug_printmodeline], Modeline 0:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0 [ 396.521178] [drm:intel_dump_pipe_config], adjusted mode: [ 396.521182] [drm:drm_mode_debug_printmodeline], Modeline 0:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0xa [ 396.521187] [drm:intel_dump_crtc_timings], crtc timings: 38250 800 832 912 1024 600 603 607 624, type: 0x0 flags: 0xa [ 396.521190] [drm:intel_dump_pipe_config], port clock: 38250 [ 396.521193] [drm:intel_dump_pipe_config], pipe src size: 800x600 [ 396.521196] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 396.521200] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 396.521203] [drm:intel_dump_pipe_config], ips: 0 [ 396.521205] [drm:intel_dump_pipe_config], double wide: 0 [ 396.546274] [drm:g4x_check_srwm], SR watermark: display plane 52, cursor 6 [ 396.546280] [drm:g4x_check_srwm], SR watermark: display plane 102, cursor 10 [ 396.546284] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=201, cursor=6, B: plane=2, cursor=2, SR: plane=52, cursor=10 [ 396.592278] [drm:i9xx_update_plane], Writing base 00A31000 00000000 0 0 3200 [ 396.592291] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 396.592297] [drm:intel_crtc_mode_set], [ENCODER:10:DAC-10] set [MODE:0:800x600] [ 396.592951] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=201, cursor=6, B: plane=169, cursor=6, SR: plane=0, cursor=0 [ 396.628275] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 396.628281] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1] [ 396.628287] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 396.628291] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 396.628294] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 396.628298] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 396.628302] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 396.628305] [drm:check_crtc_state], [CRTC:3] [ 396.630275] [drm:check_crtc_state], [CRTC:6] [ 396.632288] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 396.632296] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 396.632304] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 396.632310] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 396.632314] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 396.632464] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 396.632469] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 396.632473] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 396.632480] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 396.632483] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 396.632487] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 396.632635] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 396.632639] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 396.632643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 396.632654] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 396.632660] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 396.632666] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 396.632670] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 396.632674] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 396.632678] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 396.632683] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 396.632686] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 396.632690] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 396.632694] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 396.632701] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 396.632706] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 396.632712] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 396.632715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 396.632719] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 396.632866] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 396.632870] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 396.632873] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 396.632879] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 396.632883] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 396.632886] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 396.633033] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 396.633037] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 396.633040] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 396.709086] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191) [ 404.962649] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 404.962654] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 404.962658] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0 [ 404.962662] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 404.962664] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=1 [ 404.962668] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 404.962670] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6] [ 404.962674] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 404.962678] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains [ 404.962683] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 404.962692] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 24 [ 404.962694] [drm:intel_dp_compute_config], DP link bw required 333072 available 432000 [ 404.962697] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 404.962699] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 404.962701] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 404.962702] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 404.962705] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 404.962708] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 404.962709] [drm:intel_dump_pipe_config], requested mode: [ 404.962713] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 404.962714] [drm:intel_dump_pipe_config], adjusted mode: [ 404.962717] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 404.962720] [drm:intel_dump_crtc_timings], crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 404.962722] [drm:intel_dump_pipe_config], port clock: 270000 [ 404.962723] [drm:intel_dump_pipe_config], pipe src size: 1920x1080 [ 404.962725] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 404.962727] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 404.962729] [drm:intel_dump_pipe_config], ips: 0 [ 404.962730] [drm:intel_dump_pipe_config], double wide: 0 [ 404.970269] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 404.970273] [drm:ironlake_edp_backlight_off], [ 405.171961] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 405.182272] [drm:ironlake_edp_panel_off], Turn eDP power off [ 405.182274] [drm:ironlake_wait_panel_off], Wait for panel power off time [ 405.182278] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000 [ 405.373232] [drm:valleyview_irq_handler], hotplug event received, stat 0x00100000 [ 405.373235] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 0 [ 405.776710] [drm:ironlake_wait_panel_status], Wait complete [ 405.798265] [drm:i9xx_pfit_disable], disabling pfit, current: 0x88000000 [ 405.798268] [drm:intel_dp_link_down], [ 405.850262] [drm:g4x_wait_for_vblank], vblank wait timed out [ 405.901270] [drm:g4x_check_srwm], SR watermark: display plane 31, cursor 6 [ 405.901272] [drm:g4x_check_srwm], SR watermark: display plane 52, cursor 6 [ 405.901275] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=169, cursor=6, SR: plane=31, cursor=6 [ 405.931272] [drm:i9xx_update_plane], Writing base 0006E000 00000000 0 0 7680 [ 405.931277] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 405.931281] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080] [ 405.949267] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 405.949270] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 405.949272] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 405.949274] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 405.949278] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d0000a, PP_OFF 0x1f407d0, PP_DIV 0x270f06 [ 405.949281] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 405.949283] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 405.949286] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000 [ 405.949288] [drm:ironlake_wait_panel_status], Wait complete [ 405.949291] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 405.949293] [drm:ironlake_edp_panel_vdd_on], eDP was not running [ 405.979696] [drm:valleyview_irq_handler], hotplug event received, stat 0x10100000 [ 405.979698] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 1 [ 406.150998] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.161413] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.172410] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.197263] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 406.197420] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.208543] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.219269] [drm:intel_dp_start_link_train], clock recovery OK [ 406.219271] [drm:ironlake_edp_panel_on], Turn eDP power on [ 406.219273] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 406.219277] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008 [ 406.219278] [drm:ironlake_wait_panel_status], Wait complete [ 406.219281] [drm:ironlake_wait_panel_on], Wait for panel power on [ 406.219284] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b [ 406.373402] [drm:ironlake_wait_panel_status], Wait complete [ 406.373405] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 406.373409] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 406.373564] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.384842] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.395270] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful [ 406.395406] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.406317] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=169, cursor=6, SR: plane=0, cursor=0 [ 406.440264] [drm:ironlake_edp_backlight_on], [ 406.442265] [drm:intel_panel_enable_backlight], pipe A [ 406.442268] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7812 [ 406.442276] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 406.442280] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1] [ 406.442285] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 406.442288] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 406.442290] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 406.442292] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 406.442294] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 406.442296] [drm:check_crtc_state], [CRTC:3] [ 406.444268] [drm:check_crtc_state], [CRTC:6] [ 406.446271] [drm:intel_crtc_set_config], [CRTC:6] [FB:26] #connectors=1 (x y) (0 0) [ 406.446274] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 406.446278] [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 59 38250 800 832 912 1024 600 603 607 624 0x0 0x0 [ 406.446282] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 406.446283] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=1, fb_changed=1 [ 406.446286] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 406.446288] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6] [ 406.446291] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 406.446295] [drm:connected_sink_compute_bpp], [CONNECTOR:9:VGA-1] checking for sink bpp constrains [ 406.446298] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 406.446301] [drm:intel_dump_pipe_config], [CRTC:6][modeset] config for pipe B [ 406.446302] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 406.446304] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 406.446306] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 406.446308] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 406.446310] [drm:intel_dump_pipe_config], requested mode: [ 406.446313] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 406.446314] [drm:intel_dump_pipe_config], adjusted mode: [ 406.446318] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 406.446321] [drm:intel_dump_crtc_timings], crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa [ 406.446323] [drm:intel_dump_pipe_config], port clock: 65000 [ 406.446324] [drm:intel_dump_pipe_config], pipe src size: 1024x768 [ 406.446326] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 406.446328] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 406.446329] [drm:intel_dump_pipe_config], ips: 0 [ 406.446331] [drm:intel_dump_pipe_config], double wide: 0 [ 406.474266] [drm:g4x_check_srwm], SR watermark: display plane 107, cursor 6 [ 406.474268] [drm:g4x_check_srwm], SR watermark: display plane 211, cursor 10 [ 406.474271] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=2, cursor=2, SR: plane=107, cursor=10 [ 406.520271] [drm:i9xx_update_plane], Writing base 0006E000 00000000 0 0 7680 [ 406.520276] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 406.520279] [drm:intel_crtc_mode_set], [ENCODER:10:DAC-10] set [MODE:0:1024x768] [ 406.520931] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=150, cursor=6, SR: plane=0, cursor=0 [ 406.556265] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 406.556268] [drm:intel_connector_check_state], [CONNECTOR:9:VGA-1] [ 406.556271] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 406.556273] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 406.556276] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 406.556278] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 406.556280] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 406.556282] [drm:check_crtc_state], [CRTC:3] [ 406.558268] [drm:check_crtc_state], [CRTC:6] [ 406.560275] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 406.560278] [drm:i915_hotplug_work_func], Connector eDP-1 (pin 5) received hotplug event. [ 406.560280] [drm:i915_hotplug_work_func], Connector HDMI-A-2 (pin 5) received hotplug event. [ 406.560457] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.571522] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.582271] [drm:intel_dp_get_dpcd], DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 406.582415] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.593268] [drm:intel_dp_get_dpcd], Detected EDP PSR Panel. [ 406.593404] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.604402] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.615269] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 406.615272] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 406.615276] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 406.615428] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.626269] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 406.626421] [drm:valleyview_irq_handler], hotplug event received, stat 0x10000020 [ 406.637268] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 406.637275] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 406.637422] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 406.637424] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 406.637431] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 406.652043] [drm:i915_gem_open], [ 406.652096] [drm:i915_gem_open], [ 406.652197] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 406.654599] [drm:intel_crtc_cursor_set], cursor off [ 406.654608] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 406.654617] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 406.654622] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 406.654626] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6] [ 406.654630] [drm:intel_crtc_cursor_set], cursor off [ 406.654634] [drm:intel_crtc_set_config], [CRTC:6] [FB:26] #connectors=1 (x y) (0 0) [ 406.654638] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 406.654642] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 406.654646] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:VGA-1] to [CRTC:6] [ 406.655854] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 375 MHz (201) [ 406.753884] [drm:valleyview_set_rps], GPU freq request from 375 MHz (201) to 167 MHz (191) [ 407.804739] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191) [ 408.705349] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191) [ 409.648712] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 409.648742] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 410.705086] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 167 MHz (191) [ 433.009237] usb 1-6.2: USB disconnect, device number 12 [ 434.466780] usb 1-6.2: new low-speed USB device number 13 using xhci_hcd [ 434.488538] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 434.492055] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 434.495287] usb 1-6.2: Product: USB Optical Mouse [ 434.498538] usb 1-6.2: Manufacturer: Logitech [ 434.503343] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 434.510037] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input15 [ 434.515014] hid-generic 0003:046D:C05A.000A: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0