[    0.920755] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.920877] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.921000] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.921015] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.921139] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.921173] initcall pcie_pme_service_init+0x0/0xc returned 0 after 565 usecs
[    0.921176] calling  pci_hotplug_init+0x0/0x1a @ 1
[    0.921178] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.921298] initcall pci_hotplug_init+0x0/0x1a returned 0 after 115 usecs
[    0.921301] calling  fb_console_init+0x0/0x10b @ 1
[    0.921347] initcall fb_console_init+0x0/0x10b returned 0 after 40 usecs
[    0.921350] calling  genericbl_driver_init+0x0/0xe @ 1
[    0.921387] initcall genericbl_driver_init+0x0/0xe returned 0 after 32 usecs
[    0.921390] calling  vesafb_driver_init+0x0/0xe @ 1
[    0.921424] initcall vesafb_driver_init+0x0/0xe returned 0 after 29 usecs
[    0.921427] calling  efifb_driver_init+0x0/0xe @ 1
[    0.921460] initcall efifb_driver_init+0x0/0xe returned 0 after 28 usecs
[    0.921463] calling  acpi_reserve_resources+0x0/0xe9 @ 1
[    0.921469] initcall acpi_reserve_resources+0x0/0xe9 returned 0 after 2 usecs
[    0.921473] calling  acpi_fan_driver_init+0x0/0xc @ 1
[    0.921657] initcall acpi_fan_driver_init+0x0/0xc returned 0 after 175 usecs
[    0.921661] calling  acpi_processor_driver_init+0x0/0x42 @ 1
[    0.922068] Monitor-Mwait will be used to enter C-1 state
[    0.922073] Monitor-Mwait will be used to enter C-2 state
[    0.922079] ACPI: acpi_idle registered with cpuidle
[    0.923100] initcall acpi_processor_driver_init+0x0/0x42 returned 0 after 1398 usecs
[    0.923104] calling  acpi_thermal_init+0x0/0x40 @ 1
[    0.926819] thermal LNXTHERM:00: registered as thermal_zone0
[    0.926942] ACPI: Thermal Zone [TZ00] (44 C)
[    0.927155] initcall acpi_thermal_init+0x0/0x40 returned 0 after 3945 usecs
[    0.927160] calling  pty_init+0x0/0x20a @ 1
[    0.927239] initcall pty_init+0x0/0x20a returned 0 after 72 usecs
[    0.927242] calling  serial8250_init+0x0/0x13c @ 1
[    0.927245] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.927874] initcall serial8250_init+0x0/0x13c returned 0 after 612 usecs
[    0.927877] calling  serial_pci_driver_init+0x0/0x15 @ 1
[    0.927927] initcall serial_pci_driver_init+0x0/0x15 returned 0 after 45 usecs
[    0.927930] calling  hpet_init+0x0/0x62 @ 1
[    0.928140] initcall hpet_init+0x0/0x62 returned 0 after 200 usecs
[    0.928143] calling  nvram_init+0x0/0x78 @ 1
[    0.928200] Non-volatile memory driver v1.3
[    0.928317] initcall nvram_init+0x0/0x78 returned 0 after 166 usecs
[    0.928319] calling  mod_init+0x0/0x49 @ 1
[    0.928323] initcall mod_init+0x0/0x49 returned -19 after 0 usecs
[    0.928325] calling  agp_init+0x0/0x26 @ 1
[    0.928327] Linux agpgart interface v0.103
[    0.928442] initcall agp_init+0x0/0x26 returned 0 after 112 usecs
[    0.928445] calling  agp_amd64_mod_init+0x0/0x1b @ 1
[    0.928535] initcall agp_amd64_mod_init+0x0/0x1b returned -19 after 83 usecs
[    0.928537] calling  agp_intel_init+0x0/0x24 @ 1
[    0.928579] initcall agp_intel_init+0x0/0x24 returned 0 after 38 usecs
[    0.928581] calling  agp_sis_init+0x0/0x24 @ 1
[    0.928621] initcall agp_sis_init+0x0/0x24 returned 0 after 35 usecs
[    0.928623] calling  agp_via_init+0x0/0x24 @ 1
[    0.928661] initcall agp_via_init+0x0/0x24 returned 0 after 33 usecs
[    0.928663] calling  cn_proc_init+0x0/0x33 @ 1
[    0.928667] initcall cn_proc_init+0x0/0x33 returned 0 after 1 usecs
[    0.928671] calling  topology_sysfs_init+0x0/0x52 @ 1
[    0.928693] initcall topology_sysfs_init+0x0/0x52 returned 0 after 17 usecs
[    0.928695] calling  brd_init+0x0/0x1bf @ 1
[    0.930638] brd: module loaded
[    0.930754] initcall brd_init+0x0/0x1bf returned 0 after 2005 usecs
[    0.930757] calling  mac_hid_init+0x0/0x1f @ 1
[    0.930764] initcall mac_hid_init+0x0/0x1f returned 0 after 4 usecs
[    0.930766] calling  scsi_tgt_init+0x0/0x83 @ 1
[    0.930865] initcall scsi_tgt_init+0x0/0x83 returned 0 after 92 usecs
[    0.930868] calling  raid_init+0x0/0xc @ 1
[    0.930900] initcall raid_init+0x0/0xc returned 0 after 28 usecs
[    0.930903] calling  spi_transport_init+0x0/0x74 @ 1
[    0.930964] initcall spi_transport_init+0x0/0x74 returned 0 after 56 usecs
[    0.930967] calling  fc_transport_init+0x0/0x8f @ 1
[    0.931086] initcall fc_transport_init+0x0/0x8f returned 0 after 112 usecs
[    0.931088] calling  iscsi_transport_init+0x0/0x1b4 @ 1
[    0.931090] Loading iSCSI transport class v2.0-870.
[    0.931446] initcall iscsi_transport_init+0x0/0x1b4 returned 0 after 345 usecs
[    0.931450] calling  sas_transport_init+0x0/0xd5 @ 1
[    0.931636] initcall sas_transport_init+0x0/0xd5 returned 0 after 178 usecs
[    0.931638] calling  sas_class_init+0x0/0x31 @ 1
[    0.931646] initcall sas_class_init+0x0/0x31 returned 0 after 4 usecs
[    0.931648] calling  srp_transport_init+0x0/0x3d @ 1
[    0.931708] initcall srp_transport_init+0x0/0x3d returned 0 after 54 usecs
[    0.931710] calling  iscsi_sw_tcp_init+0x0/0x3f @ 1
[    0.931750] iscsi: registered transport (tcp)
[    0.931868] initcall iscsi_sw_tcp_init+0x0/0x3f returned 0 after 150 usecs
[    0.931871] calling  blogic_init+0x0/0xfcb @ 1
[    0.931895] initcall blogic_init+0x0/0xfcb returned 0 after 20 usecs
[    0.931900] calling  arcmsr_module_init+0x0/0x15 @ 1
[    0.931946] initcall arcmsr_module_init+0x0/0x15 returned 0 after 40 usecs
[    0.931948] calling  ahc_linux_init+0x0/0x62 @ 1
[    0.931990] initcall ahc_linux_init+0x0/0x62 returned 0 after 37 usecs
[    0.931993] calling  ahd_linux_init+0x0/0x7c @ 1
[    0.932036] initcall ahd_linux_init+0x0/0x7c returned 0 after 38 usecs
[    0.932038] calling  aac_init+0x0/0x72 @ 1
[    0.932040] Adaptec aacraid driver 1.2-0[30200]-ms
[    0.932198] initcall aac_init+0x0/0x72 returned 0 after 152 usecs
[    0.932200] calling  init_this_scsi_driver+0x0/0xd8 @ 1
[    0.932237] initcall init_this_scsi_driver+0x0/0xd8 returned -19 after 32 usecs
[    0.932240] calling  aic94xx_init+0x0/0x139 @ 1
[    0.932242] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    0.932415] initcall aic94xx_init+0x0/0x139 returned 0 after 167 usecs
[    0.932418] calling  ips_module_init+0x0/0x18b @ 1
[    0.932488] initcall ips_module_init+0x0/0x18b returned -19 after 65 usecs
[    0.932491] calling  qla1280_init+0x0/0x15 @ 1
[    0.932554] initcall qla1280_init+0x0/0x15 returned 0 after 57 usecs
[    0.932556] calling  qla2x00_module_init+0x0/0x202 @ 1
[    0.932569] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
[    0.932804] initcall qla2x00_module_init+0x0/0x202 returned 0 after 237 usecs
[    0.932806] calling  qla4xxx_module_init+0x0/0xda @ 1
[    0.932854] iscsi: registered transport (qla4xxx)
[    0.933007] QLogic iSCSI HBA Driver
[    0.933124] initcall qla4xxx_module_init+0x0/0xda returned 0 after 305 usecs
[    0.933126] calling  sym2_init+0x0/0xfe @ 1
[    0.933170] initcall sym2_init+0x0/0xfe returned 0 after 39 usecs
[    0.933173] calling  dc395x_module_init+0x0/0x15 @ 1
[    0.933214] initcall dc395x_module_init+0x0/0x15 returned 0 after 36 usecs
[    0.933216] calling  dc390_module_init+0x0/0x95 @ 1
[    0.933218] DC390: clustering now enabled by default. If you get problems load
[    0.933407]        with "disable_clustering=1" and report to maintainers
[    0.933584] initcall dc390_module_init+0x0/0x95 returned 0 after 353 usecs
[    0.933586] calling  atp870u_init+0x0/0x15 @ 1
[    0.933628] initcall atp870u_init+0x0/0x15 returned 0 after 36 usecs
[    0.933630] calling  gdth_init+0x0/0xe6 @ 1
[    0.933632] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    0.933791] initcall gdth_init+0x0/0xe6 returned 0 after 153 usecs
[    0.933793] calling  initio_init_driver+0x0/0x15 @ 1
[    0.933833] initcall initio_init_driver+0x0/0x15 returned 0 after 34 usecs
[    0.933835] calling  inia100_init+0x0/0x15 @ 1
[    0.933874] initcall inia100_init+0x0/0x15 returned 0 after 34 usecs
[    0.933877] calling  hptiop_module_init+0x0/0x33 @ 1
[    0.933879] RocketRAID 3xxx/4xxx Controller driver v1.8
[    0.934035] initcall hptiop_module_init+0x0/0x33 returned 0 after 150 usecs
[    0.934038] calling  stex_init+0x0/0x2c @ 1
[    0.934039] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    0.934200] initcall stex_init+0x0/0x2c returned 0 after 154 usecs
[    0.934203] calling  mvs_init+0x0/0xa2 @ 1
[    0.934250] initcall mvs_init+0x0/0xa2 returned 0 after 42 usecs
[    0.934253] calling  init_st+0x0/0x169 @ 1
[    0.934255] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    0.934445] initcall init_st+0x0/0x169 returned 0 after 184 usecs
[    0.934448] calling  init_osst+0x0/0x140 @ 1
[    0.934450] osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    0.934733] initcall init_osst+0x0/0x140 returned 0 after 274 usecs
[    0.934735] calling  init_sd+0x0/0x157 @ 1
[    0.934814] initcall init_sd+0x0/0x157 returned 0 after 72 usecs
[    0.934816] calling  init_sr+0x0/0x47 @ 1
[    0.934851] initcall init_sr+0x0/0x47 returned 0 after 30 usecs
[    0.934854] calling  init_sg+0x0/0x121 @ 1
[    0.934896] initcall init_sg+0x0/0x121 returned 0 after 38 usecs
[    0.934899] calling  init_ch_module+0x0/0xad @ 1
[    0.934901] SCSI Media Changer driver v0.25 
[    0.935080] initcall init_ch_module+0x0/0xad returned 0 after 172 usecs
[    0.935083] calling  ahci_pci_driver_init+0x0/0x15 @ 1
[    0.935099] ahci 0000:00:1f.2: version 3.0
[    0.935227] ahci 0000:00:1f.2: irq 59 for MSI/MSI-X
[    0.945569] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
[    0.945763] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.946555] scsi0 : ahci
[    0.946792] scsi1 : ahci
[    0.947018] scsi2 : ahci
[    0.947227] ata1: SATA max UDMA/133 abar m2048@0xb251b000 port 0xb251b100 irq 59
[    0.947417] ata2: SATA max UDMA/133 abar m2048@0xb251b000 port 0xb251b180 irq 59
[    0.947615] ata3: DUMMY
[    0.947739] calling  1_async_port_probe+0x0/0x44 @ 6
[    0.947792] calling  2_async_port_probe+0x0/0x44 @ 24
[    0.947816] calling  3_async_port_probe+0x0/0x44 @ 982
[    0.947835] async_waiting @ 982
[    0.947876] initcall ahci_pci_driver_init+0x0/0x15 returned 0 after 12482 usecs
[    0.947879] calling  inic_pci_driver_init+0x0/0x15 @ 1
[    0.947927] initcall inic_pci_driver_init+0x0/0x15 returned 0 after 42 usecs
[    0.947930] calling  sil24_pci_driver_init+0x0/0x15 @ 1
[    0.947975] initcall sil24_pci_driver_init+0x0/0x15 returned 0 after 40 usecs
[    0.947978] calling  qs_ata_pci_driver_init+0x0/0x15 @ 1
[    0.948023] initcall qs_ata_pci_driver_init+0x0/0x15 returned 0 after 39 usecs
[    0.948026] calling  pdc_sata_pci_driver_init+0x0/0x15 @ 1
[    0.948068] initcall pdc_sata_pci_driver_init+0x0/0x15 returned 0 after 36 usecs
[    0.948070] calling  piix_init+0x0/0x26 @ 1
[    0.948115] initcall piix_init+0x0/0x26 returned 0 after 39 usecs
[    0.948118] calling  mv_init+0x0/0x48 @ 1
[    0.948195] initcall mv_init+0x0/0x48 returned 0 after 71 usecs
[    0.948198] calling  nv_pci_driver_init+0x0/0x15 @ 1
[    0.948241] initcall nv_pci_driver_init+0x0/0x15 returned 0 after 38 usecs
[    0.948244] calling  pdc_ata_pci_driver_init+0x0/0x15 @ 1
[    0.948286] initcall pdc_ata_pci_driver_init+0x0/0x15 returned 0 after 36 usecs
[    0.948289] calling  sil_pci_driver_init+0x0/0x15 @ 1
[    0.948330] initcall sil_pci_driver_init+0x0/0x15 returned 0 after 36 usecs
[    0.948333] calling  sis_pci_driver_init+0x0/0x15 @ 1
[    0.948376] initcall sis_pci_driver_init+0x0/0x15 returned 0 after 38 usecs
[    0.948379] calling  k2_sata_pci_driver_init+0x0/0x15 @ 1
[    0.948421] initcall k2_sata_pci_driver_init+0x0/0x15 returned 0 after 36 usecs
[    0.948424] calling  uli_pci_driver_init+0x0/0x15 @ 1
[    0.948465] initcall uli_pci_driver_init+0x0/0x15 returned 0 after 36 usecs
[    0.948468] calling  svia_pci_driver_init+0x0/0x15 @ 1
[    0.948509] initcall svia_pci_driver_init+0x0/0x15 returned 0 after 36 usecs
[    0.948512] calling  vsc_sata_pci_driver_init+0x0/0x15 @ 1
[    0.948561] initcall vsc_sata_pci_driver_init+0x0/0x15 returned 0 after 44 usecs
[    0.948564] calling  ali_init+0x0/0x4e @ 1
[    0.948605] initcall ali_init+0x0/0x4e returned 0 after 35 usecs
[    0.948608] calling  amd_pci_driver_init+0x0/0x15 @ 1
[    0.948649] initcall amd_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
[    0.948652] calling  artop_pci_driver_init+0x0/0x15 @ 1
[    0.948693] initcall artop_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
[    0.948695] calling  atiixp_pci_driver_init+0x0/0x15 @ 1
[    0.948738] initcall atiixp_pci_driver_init+0x0/0x15 returned 0 after 37 usecs
[    0.948742] calling  atp867x_driver_init+0x0/0x15 @ 1
[    0.948781] initcall atp867x_driver_init+0x0/0x15 returned 0 after 34 usecs
[    0.948784] calling  cmd64x_pci_driver_init+0x0/0x15 @ 1
[    0.948825] initcall cmd64x_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
[    0.948828] calling  cs5520_pci_driver_init+0x0/0x15 @ 1
[    0.948867] initcall cs5520_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
[    0.948870] calling  cs5530_pci_driver_init+0x0/0x15 @ 1
[    0.948911] initcall cs5530_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
[    0.948914] calling  cy82c693_pci_driver_init+0x0/0x15 @ 1
[    0.948956] initcall cy82c693_pci_driver_init+0x0/0x15 returned 0 after 36 usecs
[    0.948958] calling  efar_pci_driver_init+0x0/0x15 @ 1
[    0.948999] initcall efar_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
[    0.949002] calling  hpt36x_pci_driver_init+0x0/0x15 @ 1
[    0.949042] initcall hpt36x_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
[    0.949045] calling  hpt37x_pci_driver_init+0x0/0x15 @ 1
[    0.949088] initcall hpt37x_pci_driver_init+0x0/0x15 returned 0 after 37 usecs
[    0.949090] calling  hpt3x2n_pci_driver_init+0x0/0x15 @ 1
[    0.949131] initcall hpt3x2n_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
[    0.949134] calling  hpt3x3_pci_driver_init+0x0/0x15 @ 1
[    0.949177] initcall hpt3x3_pci_driver_init+0x0/0x15 returned 0 after 37 usecs
[    0.949180] calling  it8213_pci_driver_init+0x0/0x15 @ 1
[    0.949220] initcall it8213_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
[    0.949223] calling  it821x_pci_driver_init+0x0/0x15 @ 1
[    0.949265] initcall it821x_pci_driver_init+0x0/0x15 returned 0 after 37 usecs
[    0.949268] calling  jmicron_pci_driver_init+0x0/0x15 @ 1
[    0.949308] initcall jmicron_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
[    0.949311] calling  marvell_pci_driver_init+0x0/0x15 @ 1
[    0.949351] initcall marvell_pci_driver_init+0x0/0x15 returned 0 after 35 usecs
[    0.949354] calling  netcell_pci_driver_init+0x0/0x15 @ 1
[    0.949397] initcall netcell_pci_driver_init+0x0/0x15 returned 0 after 37 usecs
[    0.949400] calling  ninja32_pci_driver_init+0x0/0x15 @ 1
[    0.949442] initcall ninja32_pci_driver_init+0x0/0x15 returned 0 after 37 usecs
[    0.949445] calling  ns87415_pci_driver_init+0x0/0x15 @ 1
[    0.949485] initcall ns87415_pci_driver_init+0x0/0x15 returned 0 after 34 usecs
[    0.949488] calling  oldpiix_pci_driver_init+0x0/0x15 @ 1
[    0.949544] initcall oldpiix_pci_driver_init+0x0/0x15 returned 0 after 49 usecs
[    0.949548] calling  optidma_pci_driver_init+0x0/0x15 @ 1
[    0.949606] initcall optidma_pci_driver_init+0x0/0x15 returned 0 after 52 usecs
[    0.949610] calling  pdc2027x_pci_driver_init+0x0/0x15 @ 1
[    0.949661] initcall pdc2027x_pci_driver_init+0x0/0x15 returned 0 after 45 usecs
[    0.949664] calling  pdc202xx_pci_driver_init+0x0/0x15 @ 1
[    0.949710] initcall pdc202xx_pci_driver_init+0x0/0x15 returned 0 after 40 usecs
[    0.949713] calling  serverworks_pci_driver_init+0x0/0x15 @ 1
[    0.949758] initcall serverworks_pci_driver_init+0x0/0x15 returned 0 after 39 usecs
[    0.949761] calling  sil680_pci_driver_init+0x0/0x15 @ 1
[    0.949805] initcall sil680_pci_driver_init+0x0/0x15 returned 0 after 38 usecs
[    0.949808] calling  sis_pci_driver_init+0x0/0x15 @ 1
[    0.949854] initcall sis_pci_driver_init+0x0/0x15 returned 0 after 40 usecs
[    0.949857] calling  triflex_pci_driver_init+0x0/0x15 @ 1
[    0.949901] initcall triflex_pci_driver_init+0x0/0x15 returned 0 after 38 usecs
[    0.949904] calling  via_pci_driver_init+0x0/0x15 @ 1
[    0.949947] initcall via_pci_driver_init+0x0/0x15 returned 0 after 37 usecs
[    0.949950] calling  sl82c105_pci_driver_init+0x0/0x15 @ 1
[    0.949994] initcall sl82c105_pci_driver_init+0x0/0x15 returned 0 after 38 usecs
[    0.949997] calling  cmd640_pci_driver_init+0x0/0x15 @ 1
[    0.950044] initcall cmd640_pci_driver_init+0x0/0x15 returned 0 after 40 usecs
[    0.950047] calling  mpiix_pci_driver_init+0x0/0x15 @ 1
[    0.950092] initcall mpiix_pci_driver_init+0x0/0x15 returned 0 after 39 usecs
[    0.950095] calling  ns87410_pci_driver_init+0x0/0x15 @ 1
[    0.950140] initcall ns87410_pci_driver_init+0x0/0x15 returned 0 after 39 usecs
[    0.950143] calling  opti_pci_driver_init+0x0/0x15 @ 1
[    0.950188] initcall opti_pci_driver_init+0x0/0x15 returned 0 after 40 usecs
[    0.950192] calling  pcmcia_driver_init+0x0/0xc @ 1
[    0.950243] initcall pcmcia_driver_init+0x0/0xc returned 0 after 46 usecs
[    0.950246] calling  pacpi_pci_driver_init+0x0/0x15 @ 1
[    0.950294] initcall pacpi_pci_driver_init+0x0/0x15 returned 0 after 42 usecs
[    0.950297] calling  ata_generic_pci_driver_init+0x0/0x15 @ 1
[    0.950342] initcall ata_generic_pci_driver_init+0x0/0x15 returned 0 after 39 usecs
[    0.950345] calling  net_olddevs_init+0x0/0x53 @ 1
[    0.950351] initcall net_olddevs_init+0x0/0x53 returned 0 after 2 usecs
[    0.950354] calling  b44_init+0x0/0x49 @ 1
[    0.950429] initcall b44_init+0x0/0x49 returned 0 after 69 usecs
[    0.950433] calling  bnx2_pci_driver_init+0x0/0x15 @ 1
[    0.950477] initcall bnx2_pci_driver_init+0x0/0x15 returned 0 after 38 usecs
[    0.950480] calling  cnic_init+0x0/0x79 @ 1
[    0.950482] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013)
[    0.950713] initcall cnic_init+0x0/0x79 returned 0 after 222 usecs
[    0.950717] calling  bnx2x_init+0x0/0x92 @ 1
[    0.950719] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
[    0.950985] initcall bnx2x_init+0x0/0x92 returned 0 after 257 usecs
[    0.950989] calling  tg3_driver_init+0x0/0x15 @ 1
[    0.951036] initcall tg3_driver_init+0x0/0x15 returned 0 after 41 usecs
[    0.951039] calling  e100_init_module+0x0/0x5b @ 1
[    0.951041] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.951160] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.951323] initcall e100_init_module+0x0/0x5b returned 0 after 272 usecs
[    0.951326] calling  e1000_init_module+0x0/0x7d @ 1
[    0.951328] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    0.951449] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.951627] initcall e1000_init_module+0x0/0x7d returned 0 after 289 usecs
[    0.951630] calling  e1000_init_module+0x0/0x3a @ 1
[    0.951632] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.951750] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    0.951917] initcall e1000_init_module+0x0/0x3a returned 0 after 276 usecs
[    0.951921] calling  igb_init_module+0x0/0x48 @ 1
[    0.951923] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[    0.952044] igb: Copyright (c) 2007-2013 Intel Corporation.
[    0.952207] initcall igb_init_module+0x0/0x48 returned 0 after 275 usecs
[    0.952210] calling  zd1201_usb_init+0x0/0x15 @ 1
[    0.952254] usbcore: registered new interface driver zd1201
[    0.952375] initcall zd1201_usb_init+0x0/0x15 returned 0 after 157 usecs
[    0.952379] calling  catc_driver_init+0x0/0x15 @ 1
[    0.952417] usbcore: registered new interface driver catc
[    0.952546] initcall catc_driver_init+0x0/0x15 returned 0 after 158 usecs
[    0.952550] calling  kaweth_driver_init+0x0/0x15 @ 1
[    0.952597] usbcore: registered new interface driver kaweth
[    0.952719] initcall kaweth_driver_init+0x0/0x15 returned 0 after 159 usecs
[    0.952722] calling  pegasus_init+0x0/0x16a @ 1
[    0.952724] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    0.952951] usbcore: registered new interface driver pegasus
[    0.953072] initcall pegasus_init+0x0/0x16a returned 0 after 337 usecs
[    0.953075] calling  rtl8150_driver_init+0x0/0x15 @ 1
[    0.953113] usbcore: registered new interface driver rtl8150
[    0.953235] initcall rtl8150_driver_init+0x0/0x15 returned 0 after 151 usecs
[    0.953238] calling  asix_driver_init+0x0/0x15 @ 1
[    0.953278] usbcore: registered new interface driver asix
[    0.953398] initcall asix_driver_init+0x0/0x15 returned 0 after 153 usecs
[    0.953401] calling  ax88179_178a_driver_init+0x0/0x15 @ 1
[    0.953441] usbcore: registered new interface driver ax88179_178a
[    0.953571] initcall ax88179_178a_driver_init+0x0/0x15 returned 0 after 161 usecs
[    0.953574] calling  cdc_driver_init+0x0/0x15 @ 1
[    0.953616] usbcore: registered new interface driver cdc_ether
[    0.953737] initcall cdc_driver_init+0x0/0x15 returned 0 after 155 usecs
[    0.953740] calling  r815x_driver_init+0x0/0x15 @ 1
[    0.953785] usbcore: registered new interface driver r815x
[    0.953906] initcall r815x_driver_init+0x0/0x15 returned 0 after 157 usecs
[    0.953909] calling  dm9601_driver_init+0x0/0x15 @ 1
[    0.953948] usbcore: registered new interface driver dm9601
[    0.954068] initcall dm9601_driver_init+0x0/0x15 returned 0 after 151 usecs
[    0.954071] calling  gl620a_driver_init+0x0/0x15 @ 1
[    0.954111] usbcore: registered new interface driver gl620a
[    0.954232] initcall gl620a_driver_init+0x0/0x15 returned 0 after 152 usecs
[    0.954235] calling  net1080_driver_init+0x0/0x15 @ 1
[    0.954274] usbcore: registered new interface driver net1080
[    0.954395] initcall net1080_driver_init+0x0/0x15 returned 0 after 152 usecs
[    0.954398] calling  plusb_driver_init+0x0/0x15 @ 1
[    0.954437] usbcore: registered new interface driver plusb
[    0.954564] initcall plusb_driver_init+0x0/0x15 returned 0 after 158 usecs
[    0.954567] calling  rndis_driver_init+0x0/0x15 @ 1
[    0.954608] usbcore: registered new interface driver rndis_host
[    0.954730] initcall rndis_driver_init+0x0/0x15 returned 0 after 154 usecs
[    0.954733] calling  cdc_subset_driver_init+0x0/0x15 @ 1
[    0.954774] usbcore: registered new interface driver cdc_subset
[    0.954896] initcall cdc_subset_driver_init+0x0/0x15 returned 0 after 154 usecs
[    0.954899] calling  zaurus_driver_init+0x0/0x15 @ 1
[    0.954938] usbcore: registered new interface driver zaurus
[    0.955059] initcall zaurus_driver_init+0x0/0x15 returned 0 after 151 usecs
[    0.955062] calling  mcs7830_driver_init+0x0/0x15 @ 1
[    0.955102] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    0.955293] initcall mcs7830_driver_init+0x0/0x15 returned 0 after 221 usecs
[    0.955296] calling  usbnet_init+0x0/0x28 @ 1
[    0.955303] initcall usbnet_init+0x0/0x28 returned 0 after 3 usecs
[    0.955306] calling  cdc_ncm_driver_init+0x0/0x15 @ 1
[    0.955347] usbcore: registered new interface driver cdc_ncm
[    0.955468] initcall cdc_ncm_driver_init+0x0/0x15 returned 0 after 154 usecs
[    0.955471] calling  uio_init+0x0/0xe8 @ 1
[    0.955511] initcall uio_init+0x0/0xe8 returned 0 after 34 usecs
[    0.955514] calling  cdrom_init+0x0/0x18 @ 1
[    0.955524] initcall cdrom_init+0x0/0x18 returned 0 after 6 usecs
[    0.955533] calling  nonstatic_sysfs_init+0x0/0xc @ 1
[    0.955539] initcall nonstatic_sysfs_init+0x0/0xc returned 0 after 0 usecs
[    0.955544] calling  yenta_cardbus_driver_init+0x0/0x15 @ 1
[    0.955641] initcall yenta_cardbus_driver_init+0x0/0x15 returned 0 after 89 usecs
[    0.955644] calling  mon_init+0x0/0xf4 @ 1
[    0.955767] initcall mon_init+0x0/0xf4 returned 0 after 115 usecs
[    0.955770] calling  ehci_hcd_init+0x0/0x57 @ 1
[    0.955772] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.955895] initcall ehci_hcd_init+0x0/0x57 returned 0 after 118 usecs
[    0.955898] calling  ehci_pci_init+0x0/0x63 @ 1
[    0.955900] ehci-pci: EHCI PCI platform driver
[    0.956145] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.956333] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.956540] ehci-pci 0000:00:1d.0: debug port 2
[    0.960542] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.960559] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb251c000
[    0.966556] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.966705] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.966828] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.967016] usb usb1: Product: EHCI Host Controller
[    0.967132] usb usb1: Manufacturer: Linux 3.13.0-rc8_drm-intel-nightly_9438de_20140128+ ehci_hcd
[    0.967324] usb usb1: SerialNumber: 0000:00:1d.0
[    0.967615] hub 1-0:1.0: USB hub found
[    0.967735] hub 1-0:1.0: 2 ports detected
[    0.968001] initcall ehci_pci_init+0x0/0x63 returned 0 after 11807 usecs
[    0.968005] calling  isp116x_driver_init+0x0/0xe @ 1
[    0.968047] initcall isp116x_driver_init+0x0/0xe returned 0 after 35 usecs
[    0.968050] calling  ohci_hcd_mod_init+0x0/0x30 @ 1
[    0.968053] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.968175] initcall ohci_hcd_mod_init+0x0/0x30 returned 0 after 117 usecs
[    0.968178] calling  ohci_pci_init+0x0/0x65 @ 1
[    0.968180] ohci-pci: OHCI PCI platform driver
[    0.968338] initcall ohci_pci_init+0x0/0x65 returned 0 after 150 usecs
[    0.968341] calling  uhci_hcd_init+0x0/0xbc @ 1
[    0.968343] uhci_hcd: USB Universal Host Controller Interface driver
[    0.968516] initcall uhci_hcd_init+0x0/0xbc returned 0 after 166 usecs
[    0.968519] calling  xhci_hcd_init+0x0/0x12 @ 1
[    0.968642] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.968839] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.969105] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.969125] xhci_hcd 0000:00:14.0: irq 60 for MSI/MSI-X
[    0.969184] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.969306] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.969496] usb usb2: Product: xHCI Host Controller
[    0.969624] usb usb2: Manufacturer: Linux 3.13.0-rc8_drm-intel-nightly_9438de_20140128+ xhci_hcd
[    0.969817] usb usb2: SerialNumber: 0000:00:14.0
[    0.970126] hub 2-0:1.0: USB hub found
[    0.970251] hub 2-0:1.0: 9 ports detected
[    0.971753] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.971971] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.972192] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    0.972314] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.972502] usb usb3: Product: xHCI Host Controller
[    0.972630] usb usb3: Manufacturer: Linux 3.13.0-rc8_drm-intel-nightly_9438de_20140128+ xhci_hcd
[    0.972822] usb usb3: SerialNumber: 0000:00:14.0
[    0.973132] hub 3-0:1.0: USB hub found
[    0.973254] hub 3-0:1.0: 4 ports detected
[    0.981652] initcall xhci_hcd_init+0x0/0x12 returned 0 after 12812 usecs
[    0.981658] calling  usb_storage_driver_init+0x0/0x15 @ 1
[    0.981791] usbcore: registered new interface driver usb-storage
[    0.981919] initcall usb_storage_driver_init+0x0/0x15 returned 0 after 248 usecs
[    0.981923] calling  i8042_init+0x0/0x3df @ 1
[    0.982037] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2D] at 0x60,0x64 irq 1,12
[    1.001871] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.001992] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.002232] initcall i8042_init+0x0/0x3df returned 0 after 19816 usecs
[    1.002239] calling  serport_init+0x0/0x2a @ 1
[    1.002246] initcall serport_init+0x0/0x2a returned 0 after 1 usecs
[    1.002250] calling  mousedev_init+0x0/0x57 @ 1
[    1.002333] mousedev: PS/2 mouse device common for all mice
[    1.002456] initcall mousedev_init+0x0/0x57 returned 0 after 196 usecs
[    1.002459] calling  evdev_init+0x0/0xc @ 1
[    1.002464] initcall evdev_init+0x0/0xc returned 0 after 0 usecs
[    1.002467] calling  atkbd_init+0x0/0x23 @ 1
[    1.002518] initcall atkbd_init+0x0/0x23 returned 0 after 44 usecs
[    1.002521] calling  psmouse_init+0x0/0x83 @ 1
[    1.002621] initcall psmouse_init+0x0/0x83 returned 0 after 93 usecs
[    1.002625] calling  cmos_init+0x0/0x6b @ 1
[    1.002646] rtc_cmos 00:04: RTC can wake from S4
[    1.002922] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.003069] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.003295] initcall cmos_init+0x0/0x6b returned 0 after 649 usecs
[    1.003299] calling  i2c_dev_init+0x0/0xc8 @ 1
[    1.003301] i2c /dev entries driver
[    1.003446] initcall i2c_dev_init+0x0/0xc8 returned 0 after 139 usecs
[    1.003451] calling  efivars_sysfs_init+0x0/0x1f4 @ 1
[    1.003455] initcall efivars_sysfs_init+0x0/0x1f4 returned -19 after 0 usecs
[    1.003458] calling  hid_init+0x0/0x5c @ 1
[    1.003519] hidraw: raw HID events driver (C) Jiri Kosina
[    1.003661] initcall hid_init+0x0/0x5c returned 0 after 195 usecs
[    1.003664] calling  hid_generic_init+0x0/0x15 @ 1
[    1.003729] initcall hid_generic_init+0x0/0x15 returned 0 after 59 usecs
[    1.003731] calling  a4_driver_init+0x0/0x15 @ 1
[    1.003771] initcall a4_driver_init+0x0/0x15 returned 0 after 36 usecs
[    1.003774] calling  apple_driver_init+0x0/0x15 @ 1
[    1.003813] initcall apple_driver_init+0x0/0x15 returned 0 after 35 usecs
[    1.003815] calling  belkin_driver_init+0x0/0x15 @ 1
[    1.003849] initcall belkin_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.003852] calling  ch_driver_init+0x0/0x15 @ 1
[    1.003886] initcall ch_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.003888] calling  ch_driver_init+0x0/0x15 @ 1
[    1.003922] initcall ch_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.003924] calling  cp_driver_init+0x0/0x15 @ 1
[    1.003958] initcall cp_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.003961] calling  ez_driver_init+0x0/0x15 @ 1
[    1.003995] initcall ez_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.003997] calling  gyration_driver_init+0x0/0x15 @ 1
[    1.004033] initcall gyration_driver_init+0x0/0x15 returned 0 after 32 usecs
[    1.004035] calling  ks_driver_init+0x0/0x15 @ 1
[    1.004070] initcall ks_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.004072] calling  lg_driver_init+0x0/0x15 @ 1
[    1.004106] initcall lg_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.004109] calling  ms_driver_init+0x0/0x15 @ 1
[    1.004143] initcall ms_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.004145] calling  mr_driver_init+0x0/0x15 @ 1
[    1.004178] initcall mr_driver_init+0x0/0x15 returned 0 after 29 usecs
[    1.004181] calling  ntrig_driver_init+0x0/0x15 @ 1
[    1.004218] initcall ntrig_driver_init+0x0/0x15 returned 0 after 32 usecs
[    1.004220] calling  pl_driver_init+0x0/0x15 @ 1
[    1.004254] initcall pl_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.004257] calling  pl_driver_init+0x0/0x15 @ 1
[    1.004294] initcall pl_driver_init+0x0/0x15 returned 0 after 33 usecs
[    1.004297] calling  samsung_driver_init+0x0/0x15 @ 1
[    1.004331] initcall samsung_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.004333] calling  sony_driver_init+0x0/0x15 @ 1
[    1.004371] initcall sony_driver_init+0x0/0x15 returned 0 after 33 usecs
[    1.004373] calling  sp_driver_init+0x0/0x15 @ 1
[    1.004407] initcall sp_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.004410] calling  ts_driver_init+0x0/0x15 @ 1
[    1.004444] initcall ts_driver_init+0x0/0x15 returned 0 after 30 usecs
[    1.004446] calling  hid_init+0x0/0x47 @ 1
[    1.004484] usbcore: registered new interface driver usbhid
[    1.004616] usbhid: USB HID core driver
[    1.004732] initcall hid_init+0x0/0x47 returned 0 after 276 usecs
[    1.004735] calling  sock_diag_init+0x0/0xc @ 1
[    1.004748] initcall sock_diag_init+0x0/0xc returned 0 after 9 usecs
[    1.004751] calling  flow_cache_init_global+0x0/0x177 @ 1
[    1.004833] initcall flow_cache_init_global+0x0/0x177 returned 0 after 75 usecs
[    1.004836] calling  blackhole_module_init+0x0/0xc @ 1
[    1.004840] initcall blackhole_module_init+0x0/0xc returned 0 after 0 usecs
[    1.004844] calling  sysctl_ipv4_init+0x0/0x7f @ 1
[    1.004905] initcall sysctl_ipv4_init+0x0/0x7f returned 0 after 56 usecs
[    1.004908] calling  ipv4_netfilter_init+0x0/0xc @ 1
[    1.004912] initcall ipv4_netfilter_init+0x0/0xc returned 0 after 0 usecs
[    1.004916] calling  cubictcp_register+0x0/0x53 @ 1
[    1.004917] TCP: cubic registered
[    1.005033] initcall cubictcp_register+0x0/0x53 returned 0 after 110 usecs
[    1.005036] calling  xfrm_user_init+0x0/0x4b @ 1
[    1.005038] Initializing XFRM netlink socket
[    1.005157] initcall xfrm_user_init+0x0/0x4b returned 0 after 114 usecs
[    1.005160] calling  packet_init+0x0/0x3d @ 1
[    1.005162] NET: Registered protocol family 17
[    1.005286] initcall packet_init+0x0/0x3d returned 0 after 118 usecs
[    1.005289] calling  init_rpcsec_gss+0x0/0x5a @ 1
[    1.005303] initcall init_rpcsec_gss+0x0/0x5a returned 0 after 9 usecs
[    1.005306] calling  init_dns_resolver+0x0/0xde @ 1
[    1.005317] Key type dns_resolver registered
[    1.005435] initcall init_dns_resolver+0x0/0xde returned 0 after 122 usecs
[    1.005439] calling  mcheck_init_device+0x0/0xec @ 1
[    1.005718] initcall mcheck_init_device+0x0/0xec returned 0 after 267 usecs
[    1.005894] calling  mcheck_debugfs_init+0x0/0x38 @ 1
[    1.005901] initcall mcheck_debugfs_init+0x0/0x38 returned 0 after 3 usecs
[    1.005905] calling  severities_debugfs_init+0x0/0x3a @ 1
[    1.005910] initcall severities_debugfs_init+0x0/0x3a returned 0 after 1 usecs
[    1.005913] calling  threshold_init_device+0x0/0x40 @ 1
[    1.005917] initcall threshold_init_device+0x0/0x40 returned 0 after 1 usecs
[    1.005921] calling  hpet_insert_resource+0x0/0x1e @ 1
[    1.005926] initcall hpet_insert_resource+0x0/0x1e returned 0 after 1 usecs
[    1.005928] calling  update_mp_table+0x0/0x436 @ 1
[    1.005931] initcall update_mp_table+0x0/0x436 returned 0 after 0 usecs
[    1.005933] calling  lapic_insert_resource+0x0/0x3e @ 1
[    1.005937] initcall lapic_insert_resource+0x0/0x3e returned 0 after 0 usecs
[    1.005940] calling  io_apic_bug_finalize+0x0/0x16 @ 1
[    1.005943] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs
[    1.005945] calling  print_ICs+0x0/0x423 @ 1
[    1.005949] initcall print_ICs+0x0/0x423 returned 0 after 0 usecs
[    1.005952] calling  check_early_ioremap_leak+0x0/0x4d @ 1
[    1.005956] initcall check_early_ioremap_leak+0x0/0x4d returned 0 after 0 usecs
[    1.005959] calling  pat_memtype_list_init+0x0/0x34 @ 1
[    1.005964] initcall pat_memtype_list_init+0x0/0x34 returned 0 after 1 usecs
[    1.005968] calling  init_oops_id+0x0/0x31 @ 1
[    1.005975] initcall init_oops_id+0x0/0x31 returned 0 after 2 usecs
[    1.005978] calling  pm_qos_power_init+0x0/0x5a @ 1
[    1.006129] initcall pm_qos_power_init+0x0/0x5a returned 0 after 142 usecs
[    1.006133] calling  pm_debugfs_init+0x0/0x21 @ 1
[    1.006138] initcall pm_debugfs_init+0x0/0x21 returned 0 after 1 usecs
[    1.006140] calling  printk_late_init+0x0/0x3a @ 1
[    1.006144] initcall printk_late_init+0x0/0x3a returned 0 after 1 usecs
[    1.006146] calling  tk_debug_sleep_time_init+0x0/0x39 @ 1
[    1.006151] initcall tk_debug_sleep_time_init+0x0/0x39 returned 0 after 1 usecs
[    1.006154] calling  debugfs_kprobe_init+0x0/0x83 @ 1
[    1.006160] initcall debugfs_kprobe_init+0x0/0x83 returned 0 after 3 usecs
[    1.006163] calling  taskstats_init+0x0/0x69 @ 1
[    1.006172] registered taskstats version 1
[    1.006288] initcall taskstats_init+0x0/0x69 returned 0 after 119 usecs
[    1.006291] calling  max_swapfiles_check+0x0/0x3 @ 1
[    1.006295] initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs
[    1.006298] calling  init_root_keyring+0x0/0x5 @ 1
[    1.006313] initcall init_root_keyring+0x0/0x5 returned 0 after 11 usecs
[    1.006316] calling  prandom_reseed+0x0/0x44 @ 1
[    1.006348] initcall prandom_reseed+0x0/0x44 returned 0 after 28 usecs
[    1.006352] calling  pci_resource_alignment_sysfs_init+0x0/0x17 @ 1
[    1.006356] initcall pci_resource_alignment_sysfs_init+0x0/0x17 returned 0 after 1 usecs
[    1.006359] calling  pci_sysfs_init+0x0/0x4e @ 1
[    1.006643] initcall pci_sysfs_init+0x0/0x4e returned 0 after 272 usecs
[    1.006649] calling  deferred_probe_initcall+0x0/0x65 @ 1
[    1.006698] initcall deferred_probe_initcall+0x0/0x65 returned 0 after 40 usecs
[    1.006704] calling  late_resume_init+0x0/0xde @ 1
[    1.006707]   Magic number: 14:554:943
[    1.006845] tty tty0: hash matches
[    1.006964] tty console: hash matches
[    1.007102] initcall late_resume_init+0x0/0xde returned 0 after 384 usecs
[    1.007105] calling  firmware_memmap_init+0x0/0x2a @ 1
[    1.007150] initcall firmware_memmap_init+0x0/0x2a returned 0 after 40 usecs
[    1.007153] calling  pci_mmcfg_late_insert_resources+0x0/0x46 @ 1
[    1.007158] initcall pci_mmcfg_late_insert_resources+0x0/0x46 returned 0 after 1 usecs
[    1.007161] calling  tcp_congestion_default+0x0/0xc @ 1
[    1.007166] initcall tcp_congestion_default+0x0/0xc returned 0 after 0 usecs
[    1.007170] calling  software_resume+0x0/0x285 @ 1
[    1.007172] PM: Hibernation image not present or could not be loaded.
[    1.007175] initcall software_resume+0x0/0x285 returned -2 after 1 usecs
[    1.007194] Warning: unable to open an initial console.
[    1.007313] async_waiting @ 1
[    1.022122] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.252695] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.253639] ata2.00: ATA-9: WDC WD5000LPCX-24C6HT0, 01.01A01, max UDMA/133
[    1.253779] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.253922] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.254822] ata2.00: configured for UDMA/133
[    1.254954] async_waiting @ 24
[    1.256710] ata1.00: ATA-8: LITEONIT LSS-16L6G, DS46201, max UDMA/133
[    1.256841] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.257333] ata1.00: configured for UDMA/133
[    1.257476] async_waiting @ 6
[    1.257480] async_continuing @ 6 after 0 usec
[    1.257623] scsi 0:0:0:0: Direct-Access     ATA      LITEONIT LSS-16L DS46 PQ: 0 ANSI: 5
[    1.258098] calling  4_sd_probe_async+0x0/0x1c2 @ 983
[    1.258129] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    1.258259] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.258336] initcall 1_async_port_probe+0x0/0x44 returned 0 after 303182 usecs
[    1.258349] async_continuing @ 24 after 3310 usec
[    1.258446] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000LPCX-2 01.0 PQ: 0 ANSI: 5
[    1.258633] calling  5_sd_probe_async+0x0/0x1c2 @ 6
[    1.258675] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.258677] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.258752] sd 1:0:0:0: [sdb] Write Protect is off
[    1.258754] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.258757] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.258780] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.258838] initcall 2_async_port_probe+0x0/0x44 returned 0 after 303621 usecs
[    1.259500] async_continuing @ 982 after 304230 usec
[    1.259507] initcall 3_async_port_probe+0x0/0x44 returned 0 after 304250 usecs
[    1.259551] sd 0:0:0:0: [sda] Write Protect is off
[    1.259678] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.259689] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.260151]  sda: sda1 sda2
[    1.262567] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.262702] initcall 4_sd_probe_async+0x0/0x1c2 returned 0 after 4486 usecs
[    1.269688] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.384201] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[    1.384327] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.384897] hub 1-1:1.0: USB hub found
[    1.385188] hub 1-1:1.0: 8 ports detected
[    1.539856] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[    1.566391] usb 2-2: New USB device found, idVendor=0b95, idProduct=772b
[    1.566517] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.566640] usb 2-2: Product: AX88772B
[    1.566755] usb 2-2: Manufacturer: ASIX Elec. Corp.
[    1.566882] usb 2-2: SerialNumber: 00001B
[    1.871576] asix 2-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:86:27
[    1.875946] tsc: Refined TSC clocksource calibration: 1696.073 MHz
[    2.024121] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[    2.066462] usb 2-5: New USB device found, idVendor=13d3, idProduct=5173
[    2.066598] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.066730] usb 2-5: Product: Lenovo EasyCamera
[    2.066853] usb 2-5: Manufacturer: Azurewave
[    2.066975] usb 2-5: SerialNumber: NULL
[    2.222117] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[    2.234584] usb 2-6: New USB device found, idVendor=8087, idProduct=07dc
[    2.234710] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.235030] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[    2.810656]  sdb: sdb1
[    2.811323] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.811450] initcall 5_sd_probe_async+0x0/0x1c2 returned 0 after 1515781 usecs
[    2.811460] async_continuing @ 1 after 1761121 usec
[    2.815363] Freeing unused kernel memory: 22680K (ffffffff81b49000 - ffffffff8316f000)
[    2.857773] dracut: dracut-018-35.git20120510.fc17
[    2.876386] Switched to clocksource tsc
[    2.894377] udevd[1233]: starting version 182
[    2.911386] calling  drm_core_init+0x0/0x107 [drm] @ 1241
[    2.911440] [drm] Initialized drm 1.1.0 20060810
[    2.911576] initcall drm_core_init+0x0/0x107 [drm] returned 0 after 167 usecs
[    2.912140] calling  acpi_button_driver_init+0x0/0xc [button] @ 1241
[    2.912286] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    2.934510] ACPI: Lid Switch [LID0]
[    2.934820] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    2.935118] ACPI: Power Button [PWRB]
[    2.935335] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    2.935676] ACPI: Power Button [PWRF]
[    2.936047] initcall acpi_button_driver_init+0x0/0xc [button] returned 0 after 23328 usecs
[    2.936309] calling  acpi_video_init+0x0/0x8b [video] @ 1241
[    2.936325] initcall acpi_video_init+0x0/0x8b [video] returned 0 after 9 usecs
[    2.938539] calling  i915_init+0x0/0x68 [i915] @ 1241
[    2.938980] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0a16 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
[    2.939112] [drm:intel_detect_pch], Found LynxPoint LP PCH
[    2.939267] [drm] Memory usable by graphics device = 2048M
[    2.939395] [drm:i915_gem_gtt_init], GMADR size = 256M
[    2.939397] [drm:i915_gem_gtt_init], GTT stolen size = 64M
[    2.954718] [drm:intel_opregion_setup], graphic opregion physical addr: 0x90fb1018
[    2.954728] [drm:intel_opregion_setup], Public ACPI methods supported
[    2.954729] [drm:intel_opregion_setup], SWSCI supported
[    2.960444] [drm:swsci_setup], SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
[    2.960450] [drm:intel_opregion_setup], ASLE supported
[    2.960520] i915 0000:00:02.0: irq 61 for MSI/MSI-X
[    2.960535] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.960658] [drm] Driver supports precise vblank timestamp query.
[    2.960779] [drm:init_vbt_defaults], Set default to SSC at 120000 kHz
[    2.960783] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL        d
[    2.960786] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[    2.960788] [drm:parse_general_definitions], crt_ddc_bus_pin: 0
[    2.960792] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[    2.960796] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 75600 1366 1404 1426 1592 768 771 777 790 0x8 0xa
[    2.960798] [drm:parse_lfp_panel_data], VBT initial LVDS value 300300
[    2.960801] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 0, level 255
[    2.960804] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[    2.960807] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[    2.960809] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[    2.960812] [drm:parse_mipi], No MIPI BDB found
[    2.960815] [drm:parse_ddi_port], Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
[    2.960817] [drm:parse_ddi_port], VBT HDMI level shift for port A: 0
[    2.960819] [drm:parse_ddi_port], Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
[    2.960821] [drm:parse_ddi_port], VBT HDMI level shift for port C: 6
[    2.960830] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    2.960836] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at 9ba00000
[    2.960873] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.961076] [drm:intel_print_wm_latency], Primary WM0 latency 20 (2.0 usec)
[    2.961078] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec)
[    2.961080] [drm:intel_print_wm_latency], Primary WM2 latency 36 (18.0 usec)
[    2.961082] [drm:intel_print_wm_latency], Primary WM3 latency 90 (45.0 usec)
[    2.961084] [drm:intel_print_wm_latency], Primary WM4 latency 160 (80.0 usec)
[    2.961086] [drm:intel_print_wm_latency], Sprite WM0 latency 20 (2.0 usec)
[    2.961088] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec)
[    2.961090] [drm:intel_print_wm_latency], Sprite WM2 latency 36 (18.0 usec)
[    2.961092] [drm:intel_print_wm_latency], Sprite WM3 latency 90 (45.0 usec)
[    2.961093] [drm:intel_print_wm_latency], Sprite WM4 latency 160 (80.0 usec)
[    2.961095] [drm:intel_print_wm_latency], Cursor WM0 latency 20 (2.0 usec)
[    2.961097] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec)
[    2.961099] [drm:intel_print_wm_latency], Cursor WM2 latency 36 (18.0 usec)
[    2.961101] [drm:intel_print_wm_latency], Cursor WM3 latency 90 (45.0 usec)
[    2.961103] [drm:intel_print_wm_latency], Cursor WM4 latency 160 (80.0 usec)
[    2.961105] [drm:intel_modeset_init], 3 display pipes available.
[    2.961120] [drm:intel_ddi_pll_init], CDCLK running at 450000KHz
[    2.961428] [drm:intel_dp_init_connector], Adding eDP connector on port A
[    2.961596] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
[    2.961599] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[    2.961601] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
[    2.961603] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
[    2.961605] [drm:intel_dp_i2c_init], i2c_init DPDDC-A
[    2.961609] [drm:edp_panel_vdd_on], Turning eDP VDD on
[    2.961616] [drm:edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[    2.961886] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
[    2.962032] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
[    2.962445] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00
[    2.962608] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
[    2.963685] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    2.994265] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    2.994275] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    2.994345] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 851/851, sysfs interface registered
[    3.000402] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000]
[    3.002639] [drm:gen6_ppgtt_init], Allocated pde space (2M) at GTT entry: 20
[    3.002643] [drm:i915_gem_context_init], HW context support initialized
[    3.002652] [drm:init_status_page], render ring hws offset: 0x00220000
[    3.004422] [drm:init_pipe_control], render ring pipe control offset: 0x00241000
[    3.004430] [drm:init_status_page], bsd ring hws offset: 0x00242000
[    3.004494] [drm:init_status_page], blitter ring hws offset: 0x00263000
[    3.004561] [drm:init_status_page], video enhancement ring hws offset: 0x00284000
[    3.004720] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
[    3.004723] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
[    3.004725] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
[    3.004728] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port A using clock 0x20000000
[    3.004734] [drm:intel_modeset_readout_hw_state], [ENCODER:9:TMDS-9] hw state readout: enabled, pipe A
[    3.004736] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
[    3.004740] [drm:intel_modeset_readout_hw_state], [CONNECTOR:10:eDP-1] hw state readout: enabled
[    3.004742] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-1] hw state readout: disabled
[    3.004744] [drm:intel_modeset_setup_hw_state], [CRTC:3] found active mode: 
[    3.004748] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 75599 1366 1404 1426 1592 768 771 777 790 0x0 0x5
[    3.004752] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[    3.004753] [drm:intel_dump_pipe_config], cpu_transcoder: P
[    3.004755] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 0
[    3.004758] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    3.004760] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 5284823, gmch_n: 8388608, link_m: 146800, link_n: 524288, tu: 64
[    3.004762] [drm:intel_dump_pipe_config], requested mode:
[    3.004765] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
[    3.004767] [drm:intel_dump_pipe_config], adjusted mode:
[    3.004769] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
[    3.004772] [drm:intel_dump_crtc_timings], crtc timings: 75599 1366 1404 1426 1592 768 771 777 790, type: 0x0 flags: 0x5
[    3.004774] [drm:intel_dump_pipe_config], port clock: 270000
[    3.004776] [drm:intel_dump_pipe_config], pipe src size: 720x400
[    3.004778] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    3.004781] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x05560300, enabled
[    3.004782] [drm:intel_dump_pipe_config], ips: 0
[    3.004784] [drm:intel_dump_pipe_config], double wide: 0
[    3.004787] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
[    3.004788] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    3.004790] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    3.004792] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    3.004794] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    3.004796] [drm:intel_dump_pipe_config], requested mode:
[    3.004799] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    3.004800] [drm:intel_dump_pipe_config], adjusted mode:
[    3.004803] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    3.004806] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    3.004807] [drm:intel_dump_pipe_config], port clock: 0
[    3.004809] [drm:intel_dump_pipe_config], pipe src size: 0x0
[    3.004811] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    3.004813] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    3.004815] [drm:intel_dump_pipe_config], ips: 0
[    3.004816] [drm:intel_dump_pipe_config], double wide: 0
[    3.004819] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
[    3.004820] [drm:intel_dump_pipe_config], cpu_transcoder: C
[    3.004822] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    3.004824] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    3.004827] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    3.004828] [drm:intel_dump_pipe_config], requested mode:
[    3.004831] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    3.004832] [drm:intel_dump_pipe_config], adjusted mode:
[    3.004835] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    3.004838] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    3.004839] [drm:intel_dump_pipe_config], port clock: 0
[    3.004841] [drm:intel_dump_pipe_config], pipe src size: 0x0
[    3.004843] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    3.004845] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    3.004847] [drm:intel_dump_pipe_config], ips: 0
[    3.004848] [drm:intel_dump_pipe_config], double wide: 0
[    3.004855] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
[    3.004858] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[    3.004860] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[    3.004863] [drm:check_crtc_state], [CRTC:3]
[    3.004870] [drm:check_crtc_state], [CRTC:5]
[    3.004872] [drm:check_crtc_state], [CRTC:7]
[    3.004883] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
[    3.004885] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
[    3.005056] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
[    3.005219] [drm:intel_dp_probe_oui], Branch OUI: 000000
[    3.005228] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    3.005233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
[    3.005239] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
[    3.005244] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[    3.005247] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[    3.005405] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    3.005408] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    3.005412] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
[    3.005415] [drm:drm_setup_crtcs], 
[    3.005418] [drm:drm_enable_connectors], connector 10 enabled? yes
[    3.005420] [drm:drm_enable_connectors], connector 18 enabled? no
[    3.005423] [drm:drm_target_preferred], looking for cmdline mode on connector 10
[    3.005426] [drm:drm_target_preferred], looking for preferred mode on connector 10
[    3.005429] [drm:drm_target_preferred], found mode 1366x768
[    3.005432] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[    3.005435] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
[    3.005439] [drm:intelfb_create], no BIOS fb, allocating a new one
[    3.005442] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000
[    3.005449] [drm:i915_pages_create_for_stolen], offset=0x0, size=4227072
[    3.006256] [drm:intelfb_create], allocated 1366x768 fb: 0x002a5000, bo ffff880002e2a000
[    3.006395] fbcon: inteldrmfb (fb0) is primary device
[    3.007750] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[    3.007752] [drm:intel_set_config_compute_mode_changes], crtc has no fb, will flip
[    3.007753] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[    3.007756] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 75599 1366 1404 1426 1592 768 771 777 790 0x0 0x5
[    3.007759] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
[    3.007760] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=1
[    3.007763] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    3.007765] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    3.007767] [drm:connected_sink_compute_bpp], [CONNECTOR:10:eDP-1] checking for sink bpp constrains
[    3.007769] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
[    3.007771] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 75600KHz
[    3.007774] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
[    3.007775] [drm:intel_dp_compute_config], DP link bw required 136080 available 216000
[    3.007777] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[    3.007779] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[    3.007779] [drm:intel_dump_pipe_config], cpu_transcoder: P
[    3.007780] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[    3.007782] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    3.007784] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 2642411, gmch_n: 4194304, link_m: 146800, link_n: 524288, tu: 64
[    3.007785] [drm:intel_dump_pipe_config], requested mode:
[    3.007788] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
[    3.007789] [drm:intel_dump_pipe_config], adjusted mode:
[    3.007791] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
[    3.007793] [drm:intel_dump_crtc_timings], crtc timings: 75600 1366 1404 1426 1592 768 771 777 790, type: 0x48 flags: 0xa
[    3.007794] [drm:intel_dump_pipe_config], port clock: 270000
[    3.007795] [drm:intel_dump_pipe_config], pipe src size: 1366x768
[    3.007797] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    3.007798] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    3.007799] [drm:intel_dump_pipe_config], ips: 1
[    3.007800] [drm:intel_dump_pipe_config], double wide: 0
[    3.007806] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    3.007810] [drm:intel_edp_backlight_off], 
[    3.009643] [drm:intel_edp_panel_off], Turn eDP power off
[    3.208545] [drm:wait_panel_off], Wait for panel power off time
[    3.208551] [drm:wait_panel_status], mask b0000000 value 00000000 status 80000008 control abcd0008
[    3.263566] [drm:wait_panel_status], Wait complete
[    3.263573] [drm:intel_update_fbc], no output, disabling
[    3.263579] [drm:hsw_set_power_well], Requesting to disable the power well
[    3.263602] [drm:hsw_unclaimed_reg_check] *ERROR* Unclaimed write to 68080
[    3.263604] [drm:hsw_unclaimed_reg_check] *ERROR* Unclaimed write to 68070
[    3.263607] [drm:hsw_unclaimed_reg_check] *ERROR* Unclaimed write to 68074
[    3.263610] [drm:intel_uncore_check_errors] *ERROR* Unclaimed register before interrupt
[    3.263614] [drm:ironlake_update_plane], Writing base 002A5000 00000000 0 0 5504
[    3.263624] [drm:intel_crtc_mode_set], [ENCODER:9:TMDS-9] set [MODE:0:1366x768]
[    3.263626] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
[    3.263629] [drm:intel_edp_panel_on], Turn eDP power on
[    3.263632] [drm:wait_panel_power_cycle], Wait for panel power cycle
[    3.809796] [drm:wait_panel_status], mask b800000f value 00000000 status 08000001 control abcd0008
[    3.831804] [drm:wait_panel_status], Wait complete
[    3.831809] [drm:wait_panel_on], Wait for panel power on
[    3.831814] [drm:wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
[    4.040892] [drm:wait_panel_status], Wait complete
[    4.041982] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[    4.042419] [drm:intel_dp_start_link_train], clock recovery OK
[    4.043158] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[    4.094842] [drm:g4x_wait_for_vblank], vblank wait timed out
[    4.094989] [drm:intel_edp_backlight_on], 
[    4.094994] [drm:intel_panel_enable_backlight], pipe A
[    4.094998] [drm:intel_panel_actually_set_backlight], set backlight PWM = 851
[    4.095004] [drm:intel_edp_psr_match_conditions], PSR condition failed: fb not tiled or fenced
[    4.128856] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
[    4.146867] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
[    4.146870] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[    4.146873] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[    4.146875] [drm:check_crtc_state], [CRTC:3]
[    4.146884] [drm:check_crtc_state], [CRTC:5]
[    4.146886] [drm:check_crtc_state], [CRTC:7]
[    4.146890] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[    4.146894] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    4.146897] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.146899] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[    4.146901] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[    4.146903] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.146931] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[    4.146933] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    4.146936] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.154191] Console: switching to colour frame buffer device 170x48
[    4.154196] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[    4.154198] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    4.154200] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.161756] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.161827] i915 0000:00:02.0: registered panic notifier
[    4.168637] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.169113] [drm:asle_set_backlight], bclp = 0x800000ff
[    4.169116] [drm:asle_set_backlight], updating opregion backlight 255/255
[    4.169120] [drm:intel_panel_actually_set_backlight], set backlight PWM = 765
[    4.169260] [drm:asle_set_backlight], bclp = 0x800000ff
[    4.169263] [drm:asle_set_backlight], updating opregion backlight 255/255
[    4.169266] [drm:intel_panel_actually_set_backlight], set backlight PWM = 765
[    4.169548] acpi device:49: registered as cooling_device4
[    4.169775] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    4.170230] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.170571] initcall i915_init+0x0/0x68 [i915] returned 0 after 1202624 usecs
[    4.174264] dracut: Starting plymouth daemon
[    4.183273] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[    4.183277] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    4.183280] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.191322] [drm:i915_gem_open], 
[    4.191835] [drm:gen6_ppgtt_init], Allocated pde space (2M) at GTT entry: 6b0
[    4.191942] [drm:intel_crtc_cursor_set], cursor off
[    4.191947] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[    4.191950] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    4.191953] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.191956] [drm:intel_crtc_cursor_set], cursor off
[    4.191958] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[    4.191960] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    4.191962] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.191964] [drm:intel_crtc_cursor_set], cursor off
[    4.191966] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[    4.191968] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[    4.191970] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.191986] [drm:i915_gem_open], 
[    4.192467] [drm:gen6_ppgtt_init], Allocated pde space (2M) at GTT entry: 6b0
[    4.192533] [drm:intel_crtc_cursor_set], cursor off
[    4.192535] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[    4.192538] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    4.192540] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.192542] [drm:intel_crtc_cursor_set], cursor off
[    4.192544] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[    4.192546] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    4.192548] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.192550] [drm:intel_crtc_cursor_set], cursor off
[    4.192551] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[    4.192553] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[    4.192556] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[    4.192563] [drm:i915_gem_open], 
[    4.193048] [drm:gen6_ppgtt_init], Allocated pde space (2M) at GTT entry: 6b0
[    4.193130] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[2] ENCODERS[2]
[    4.193133] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[2] ENCODERS[2]
[    4.193141] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[    4.193144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
[    4.193147] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
[    4.193344] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
[    4.193508] [drm:intel_dp_probe_oui], Branch OUI: 000000
[    4.193520] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[    4.193525] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
[    4.193531] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
[    4.193537] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[    4.197171] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[    4.197175] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[    4.197178] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[    4.197340] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    4.197343] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    4.197345] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
[    4.197349] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[    4.197351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[    4.197353] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[    4.197512] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    4.197513] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    4.197516] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
[    4.275886] calling  acpi_cpufreq_init+0x0/0x1ef [acpi_cpufreq] @ 1451
[    4.276975] initcall acpi_cpufreq_init+0x0/0x1ef [acpi_cpufreq] returned 0 after 1052 usecs
[    4.277763] calling  acpi_ac_init+0x0/0x34 [ac] @ 1489
[    4.278764] ACPI: AC Adapter [ACAD] (off-line)
[    4.278907] initcall acpi_ac_init+0x0/0x34 [ac] returned 0 after 1108 usecs
[    4.291419] calling  acpi_battery_init+0x0/0x13 [battery] @ 1471
[    4.291431] initcall acpi_battery_init+0x0/0x13 [battery] returned 0 after 3 usecs
[    4.292879] calling  acpi_wmi_init+0x0/0x6a [wmi] @ 1479
[    4.293055] calling  init_soundcore+0x0/0x9b [soundcore] @ 1475
[    4.293103] initcall init_soundcore+0x0/0x9b [soundcore] returned 0 after 39 usecs
[    4.293663] calling  alsa_sound_init+0x0/0x93 [snd] @ 1475
[    4.293687] initcall alsa_sound_init+0x0/0x93 [snd] returned 0 after 14 usecs
[    4.295795] calling  alsa_timer_init+0x0/0x17c [snd_timer] @ 1475
[    4.295914] initcall alsa_timer_init+0x0/0x17c [snd_timer] returned 0 after 105 usecs
[    4.296199] calling  videodev_init+0x0/0x7f [videodev] @ 1467
[    4.296203] Linux video capture interface: v2.00
[    4.296343] calling  snd_mem_init+0x0/0x2a [snd_page_alloc] @ 1475
[    4.296355] initcall snd_mem_init+0x0/0x2a [snd_page_alloc] returned 0 after 6 usecs
[    4.297352] initcall videodev_init+0x0/0x7f [videodev] returned 0 after 1110 usecs
[    4.298057] calling  alsa_pcm_init+0x0/0x67 [snd_pcm] @ 1475
[    4.298073] initcall alsa_pcm_init+0x0/0x67 [snd_pcm] returned 0 after 5 usecs
[    4.299290] calling  alsa_hwdep_init+0x0/0x5f [snd_hwdep] @ 1475
[    4.299303] initcall alsa_hwdep_init+0x0/0x5f [snd_hwdep] returned 0 after 4 usecs
[    4.300186] calling  lpc_ich_driver_init+0x0/0x1a [lpc_ich] @ 1772
[    4.301243] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[    4.301383] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.301423] calling  azx_driver_init+0x0/0x1a [snd_hda_intel] @ 1773
[    4.301501] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    4.301640] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    4.301780] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.301894] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    4.302046] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    4.302184] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
[    4.302323] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.303735] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.305558] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module
[    4.305566] [drm:hsw_set_power_well], Enabling power well
[    4.305607] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
[    4.305760] initcall lpc_ich_driver_init+0x0/0x1a [lpc_ich] returned 0 after 5429 usecs
[    4.305926] calling  uvc_init+0x0/0x4b [uvcvideo] @ 1467
[    4.305983] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5173)
[    4.306553] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
[    4.308792] calling  iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] @ 1463
[    4.308796] iTCO_vendor_support: vendor-support=0
[    4.309827] initcall iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] returned 0 after 1002 usecs
[    4.310077] calling  iTCO_wdt_init_module+0x0/0x2b [iTCO_wdt] @ 1463
[    4.310080] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    4.311264] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    4.313336] calling  patch_hdmi_init+0x0/0xc [snd_hda_codec_hdmi] @ 2020
[    4.313345] initcall patch_hdmi_init+0x0/0xc [snd_hda_codec_hdmi] returned 0 after 0 usecs
[    4.313539] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.313557] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input7
[    4.315158] calling  i2c_i801_init+0x0/0xa4 [i2c_i801] @ 1487
[    4.315238] usbcore: registered new interface driver uvcvideo
[    4.315239] USB Video Class driver (1.1.1)
[    4.315248] initcall uvc_init+0x0/0x4b [uvcvideo] returned 0 after 9079 usecs
[    4.317503] calling  patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] @ 2034
[    4.317510] initcall patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] returned 0 after 0 usecs
[    4.317838] ALSA sound/pci/hda/patch_realtek.c:419 SKU: Nid=0x1d sku_cfg=0x40f41905
[    4.317841] ALSA sound/pci/hda/patch_realtek.c:421 SKU: port_connectivity=0x1
[    4.317842] ALSA sound/pci/hda/patch_realtek.c:422 SKU: enable_pcbeep=0x1
[    4.317843] ALSA sound/pci/hda/patch_realtek.c:423 SKU: check_sum=0x00000004
[    4.317844] ALSA sound/pci/hda/patch_realtek.c:424 SKU: customization=0x00000019
[    4.317845] ALSA sound/pci/hda/patch_realtek.c:425 SKU: external_amp=0x0
[    4.317846] ALSA sound/pci/hda/patch_realtek.c:426 SKU: platform_type=0x1
[    4.317847] ALSA sound/pci/hda/patch_realtek.c:427 SKU: swap=0x0
[    4.317848] ALSA sound/pci/hda/patch_realtek.c:428 SKU: override=0x1
[    4.318070] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.318073] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.318076] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.318077] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
[    4.318079] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
[    4.318081] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x19
[    4.318084] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x12
[    4.318086] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x40f41905 for NID 0x1d
[    4.318089] ALSA sound/pci/hda/patch_realtek.c:507 realtek: Enabling init ASM_ID=0x1905 CODEC_ID=10ec0283
[    4.324199] calling  pcspkr_platform_driver_init+0x0/0x13 [pcspkr] @ 1490
[    4.324325] initcall iTCO_wdt_init_module+0x0/0x2b [iTCO_wdt] returned 0 after 13899 usecs
[    4.324406] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    4.326076] initcall pcspkr_platform_driver_init+0x0/0x13 [pcspkr] returned 0 after 1823 usecs
[    4.326179] initcall azx_driver_init+0x0/0x1a [snd_hda_intel] returned 0 after 24157 usecs
[    4.326214] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[    4.328217] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.329562] initcall i2c_i801_init+0x0/0xa4 [i2c_i801] returned 0 after 14051 usecs
[    4.359720] ACPI: Battery Slot [BAT1] (battery present)
[    4.362601] wmi: Mapper loaded
[    4.362613] initcall acpi_wmi_init+0x0/0x6a [wmi] returned 0 after 68057 usecs
[    4.477065] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    4.594920] random: nonblocking pool is initialized
[    4.683215] dracut: Checking ext4: /dev/sdb1
[    4.684766] dracut: issuing e2fsck -a  /dev/sdb1
[    4.713216] [drm:intel_print_rc6_info], Haswell: only RC6 available
[    4.713220] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    4.902228] dracut: /dev/sdb1: clean, 1949843/30081024 files, 27743279/120320000 blocks
[    4.904131] dracut: Remounting /dev/sdb1 with -o ro
[    4.941871] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    5.050752] dracut: Mounted root filesystem /dev/sdb1
[    5.178993] calling  dm_init+0x0/0x43 [dm_mod] @ 2307
[    5.179222] device-mapper: uevent: version 1.0.3
[    5.181001] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    5.182580] initcall dm_init+0x0/0x43 [dm_mod] returned 0 after 3488 usecs
[    5.279959] dracut: Switching root
[    5.969648] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
[    5.969658] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[    6.101949] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    6.212931] systemd[1]: Failed to insert module 'ipv6'
[    6.236920] systemd[1]: Set hostname to <x-hswu22>.
[    6.633863] LVM: Logical Volume autoactivation enabled.
[    6.635493] LVM: Activation generator successfully completed.
[    7.287852] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.289529] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.291135] systemd[1]: Starting Syslog Socket.
[    7.292790] systemd[1]: Listening on Syslog Socket.
[    7.294389] systemd[1]: Starting Remote File Systems.
[    7.296058] systemd[1]: Reached target Remote File Systems.
[    7.296092] systemd[1]: Starting Replay Read-Ahead Data...
[    7.301074] systemd[1]: Starting Collect Read-Ahead Data...
[    7.303976] systemd[1]: Starting Delayed Shutdown Socket.
[    7.306589] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.306610] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.309607] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.309647] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.313968] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.313987] systemd[1]: Starting Journal Socket.
[    7.316990] systemd[1]: Listening on Journal Socket.
[    7.317073] systemd[1]: Starting Create static device nodes in /dev...
[    7.321722] systemd[1]: Mounting Huge Pages File System...
[    7.324572] systemd[1]: Starting Journal Service...
[    7.327081] systemd-readahead[2334]: Failed to create fanotify object: Function not implemented
[    7.327128] systemd-readahead[2333]: Bumped block_nr parameter of 8:16 to 20480. This is a temporary hack and should be removed one day.
[    7.331629] systemd[1]: Started Journal Service.
[    7.331972] systemd[1]: Mounting Debug File System...
[    7.336462] systemd[1]: Starting Encrypted Volumes.
[    7.339010] systemd[1]: Reached target Encrypted Volumes.
[    7.339084] systemd[1]: Starting udev Kernel Socket.
[    7.343218] systemd[1]: Listening on udev Kernel Socket.
[    7.343280] systemd[1]: Starting udev Control Socket.
[    7.347293] systemd[1]: Listening on udev Control Socket.
[    7.347344] systemd[1]: Starting udev Coldplug all Devices...
[    7.351596] systemd[1]: Mounting POSIX Message Queue File System...
[    7.354210] systemd[1]: Starting LVM2 metadata daemon socket.
[    7.356532] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.356547] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    7.360520] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.360534] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    7.363681] systemd[1]: Expecting device dev-disk-by\x2duuid-6a28c748\x2d80f9\x2d48ad\x2d8ff8\x2dba93ce869566.device...
[    7.366109] systemd[1]: Mounting Temporary Directory...
[    7.573844] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    7.575797] systemd[1]: Expecting device dev-disk-by\x2duuid-93D4\x2d471C.device...
[    7.579286] systemd[1]: Started Replay Read-Ahead Data.
[    7.579765] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
[    7.582690] systemd[1]: Started Collect Read-Ahead Data.
[    7.689831] systemd[1]: Starting Load legacy module configuration...
[    7.692081] systemd[1]: Started File System Check on Root Device.
[    7.692126] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.755896] systemd[1]: Started Set Up Additional Binary Formats.
[    7.757823] systemd[1]: Started Load Kernel Modules.
[    7.759312] systemd[1]: Mounted Configuration File System.
[    7.760766] systemd[1]: Mounting FUSE Control File System...
[    7.762763] systemd[1]: Starting Setup Virtual Console...
[    7.802648] systemd[1]: Starting Apply Kernel Variables...
[    8.181692] EXT4-fs (sdb1): re-mounted. Opts: (null)
[    9.434849] systemd-udevd[3194]: starting version 204
[    9.799869] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    9.962668] Adding 2047996k swap on /dev/sda2.  Priority:-1 extents:1 across:2047996k SS
[   10.417128] type=1305 audit(1390924489.403:2): audit_pid=3234 old=0 auid=4294967295 ses=4294967295 res=1
[   12.993372] [drm:intel_crtc_cursor_set], cursor off
[   12.993379] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[   12.993383] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[   12.993386] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[   12.993389] [drm:intel_crtc_cursor_set], cursor off
[   12.993391] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[   12.993393] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[   12.993396] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[   12.993398] [drm:intel_crtc_cursor_set], cursor off
[   12.993399] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[   12.993402] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[   12.993404] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[   14.810203] systemd-logind[3267]: Watching system buttons on /dev/input/event4 (Power Button)
[   14.811429] systemd-logind[3267]: Watching system buttons on /dev/input/event5 (Video Bus)
[   14.812533] systemd-logind[3267]: Watching system buttons on /dev/input/event3 (Power Button)
[   14.813654] systemd-logind[3267]: Watching system buttons on /dev/input/event2 (Lid Switch)
[   14.888455] systemd-udevd[3195]: renamed network interface eth0 to enp0s20u2
[   22.869574] asix 2-2:1.0 enp0s20u2: link down
[   24.534816] asix 2-2:1.0 enp0s20u2: link up, 100Mbps, full-duplex, lpa 0x43E1
[   73.052431] PM: Syncing filesystems ... done.
[   73.199683] PM: Preparing system for mem sleep
[   73.199840] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   73.201029] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[   73.201770] PM: Entering mem sleep
[   73.201846] Suspending console(s) (use no_console_suspend to debug)
[   73.201990] calling  input8+ @ 3472, parent: pcspkr
[   73.201992] call input8+ returned 0 after 0 usecs
[   73.201999] calling  input7+ @ 3472, parent: 2-5:1.0
[   73.202000] call input7+ returned 0 after 0 usecs
[   73.202002] calling  iTCO_wdt+ @ 3472, parent: 0000:00:1f.0
[   73.202003] call iTCO_wdt+ returned 0 after 0 usecs
[   73.202006] calling  input6+ @ 3472, parent: LNXVIDEO:00
[   73.202007] call input6+ returned 0 after 0 usecs
[   73.202009] calling  acpi_video0+ @ 3472, parent: 0000:00:02.0
[   73.202010] call acpi_video0+ returned 0 after 0 usecs
[   73.202013] calling  card0-HDMI-A-1+ @ 3472, parent: card0
[   73.202014] call card0-HDMI-A-1+ returned 0 after 0 usecs
[   73.202015] calling  intel_backlight+ @ 3472, parent: card0-eDP-1
[   73.202016] call intel_backlight+ returned 0 after 0 usecs
[   73.202018] calling  i2c-6+ @ 3472, parent: card0-eDP-1
[   73.202020] call i2c-6+ returned 0 after 0 usecs
[   73.202021] calling  card0-eDP-1+ @ 3472, parent: card0
[   73.202022] call card0-eDP-1+ returned 0 after 0 usecs
[   73.202024] calling  i2c-5+ @ 3472, parent: 0000:00:02.0
[   73.202024] call i2c-5+ returned 0 after 0 usecs
[   73.202026] calling  i2c-4+ @ 3472, parent: 0000:00:02.0
[   73.202027] call i2c-4+ returned 0 after 0 usecs
[   73.202029] calling  i2c-3+ @ 3472, parent: 0000:00:02.0
[   73.202029] call i2c-3+ returned 0 after 0 usecs
[   73.202031] calling  i2c-2+ @ 3472, parent: 0000:00:02.0
[   73.202032] call i2c-2+ returned 0 after 0 usecs
[   73.202033] calling  i2c-1+ @ 3472, parent: 0000:00:02.0
[   73.202034] call i2c-1+ returned 0 after 0 usecs
[   73.202036] calling  i2c-0+ @ 3472, parent: 0000:00:02.0
[   73.202036] call i2c-0+ returned 0 after 0 usecs
[   73.202038] calling  card0+ @ 3472, parent: 0000:00:02.0
[   73.202039] call card0+ returned 0 after 0 usecs
[   73.202040] calling  controlD64+ @ 3472, parent: 0000:00:02.0
[   73.202041] call controlD64+ returned 0 after 0 usecs
[   73.202043] calling  input5+ @ 3472, parent: LNXPWRBN:00
[   73.202044] call input5+ returned 0 after 0 usecs
[   73.202046] calling  input4+ @ 3472, parent: PNP0C0C:00
[   73.202047] call input4+ returned 0 after 0 usecs
[   73.202049] calling  input3+ @ 3472, parent: PNP0C0D:00
[   73.202050] call input3+ returned 0 after 0 usecs
[   73.202058] calling  input2+ @ 3472, parent: serio1
[   73.202059] call input2+ returned 0 after 0 usecs
[   73.202089] calling  input0+ @ 3472, parent: serio0
[   73.202090] call input0+ returned 0 after 0 usecs
[   73.202095] calling  rtc0+ @ 3472, parent: 00:04
[   73.202096] call rtc0+ returned 0 after 0 usecs
[   73.202098] calling  serio1+ @ 3472, parent: i8042
[   73.202108] calling  2-5+ @ 982, parent: usb2
[   73.202111] call 2-5+ returned 0 after 0 usecs
[   73.202113] calling  2-2+ @ 982, parent: usb2
[   73.202126] calling  1-1+ @ 6, parent: usb1
[   73.202216] calling  1:0:0:0+ @ 984, parent: target1:0:0
[   73.202222] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[   73.202235] calling  2-6+ @ 983, parent: usb2
[   73.202238] call 2-2+ returned 0 after 119 usecs
[   73.202239] call 2-6+ returned 0 after 1 usecs
[   73.202242] calling  0:0:0:0+ @ 983, parent: target0:0:0
[   73.202245] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   73.202306] sd 1:0:0:0: [sdb] Stopping disk
[   73.204655] sd 0:0:0:0: [sda] Stopping disk
[   73.214170] call serio1+ returned 0 after 11779 usecs
[   73.214176] calling  serio0+ @ 3472, parent: i8042
[   73.214780] call serio0+ returned 0 after 589 usecs
[   73.214782] calling  i8042+ @ 3472, parent: platform
[   73.219988] call i8042+ returned 0 after 5080 usecs
[   73.220036] calling  usb3+ @ 3528, parent: 0000:00:14.0
[   73.220045] calling  serial8250+ @ 3472, parent: platform
[   73.220047] call serial8250+ returned 0 after 0 usecs
[   73.220064] calling  alarmtimer+ @ 3472, parent: platform
[   73.220066] call alarmtimer+ returned 0 after 0 usecs
[   73.220070] calling  platform-framebuffer.0+ @ 3472, parent: platform
[   73.220071] call platform-framebuffer.0+ returned 0 after 0 usecs
[   73.220073] calling  pcspkr+ @ 3472, parent: platform
[   73.220081] call pcspkr+ returned 0 after 6 usecs
[   73.220093] calling  usb2+ @ 1141, parent: 0000:00:14.0
[   73.220126] calling  00:08+ @ 3472, parent: pnp0
[   73.220128] call 00:08+ returned 0 after 1 usecs
[   73.220130] calling  00:07+ @ 3472, parent: pnp0
[   73.220132] call usb3+ returned 0 after 90 usecs
[   73.220133] call 00:07+ returned 0 after 0 usecs
[   73.220135] calling  00:06+ @ 3472, parent: pnp0
[   73.220137] calling  host2+ @ 3528, parent: ata3
[   73.220138] call 00:06+ returned 0 after 0 usecs
[   73.220139] call host2+ returned 0 after 0 usecs
[   73.220140] calling  00:05+ @ 3472, parent: pnp0
[   73.220143] call 00:05+ returned 0 after 0 usecs
[   73.220145] calling  00:04+ @ 3472, parent: pnp0
[   73.220150] call 00:04+ returned 0 after 4 usecs
[   73.220151] calling  00:03+ @ 3472, parent: pnp0
[   73.220153] call 00:03+ returned 0 after 0 usecs
[   73.220154] calling  00:02+ @ 3472, parent: pnp0
[   73.220155] call 00:02+ returned 0 after 0 usecs
[   73.220156] calling  00:01+ @ 3472, parent: pnp0
[   73.220157] call 00:01+ returned 0 after 0 usecs
[   73.220158] calling  00:00+ @ 3472, parent: pnp0
[   73.220159] call 00:00+ returned 0 after 0 usecs
[   73.220165] calling  VPC2004:00+ @ 3472, parent: platform
[   73.220166] call VPC2004:00+ returned 0 after 0 usecs
[   73.220171] calling  ata3+ @ 3531, parent: 0000:00:1f.2
[   73.220189] call ata3+ returned 0 after 16 usecs
[   73.220205] call usb2+ returned 0 after 106 usecs
[   73.220214] calling  0000:02:00.0+ @ 1141, parent: 0000:00:1c.2
[   73.220217] call 0000:02:00.0+ returned 0 after 1 usecs
[   73.220219] calling  0000:00:1f.3+ @ 1141, parent: pci0000:00
[   73.220324] call 0000:00:1f.3+ returned 0 after 101 usecs
[   73.220348] calling  0000:00:1f.0+ @ 3533, parent: pci0000:00
[   73.220349] call 0000:00:1f.0+ returned 0 after 0 usecs
[   73.220380] calling  0000:00:1c.3+ @ 3534, parent: pci0000:00
[   73.220387] call 0000:00:1c.3+ returned 0 after 6 usecs
[   73.220392] calling  0000:00:1c.2+ @ 3534, parent: pci0000:00
[   73.220398] call 0000:00:1c.2+ returned 0 after 4 usecs
[   73.220401] calling  0000:00:1c.0+ @ 3534, parent: pci0000:00
[   73.220406] call 0000:00:1c.0+ returned 0 after 4 usecs
[   73.220409] calling  0000:00:16.0+ @ 3534, parent: pci0000:00
[   73.220410] call 0000:00:16.0+ returned 0 after 0 usecs
[   73.220413] calling  0000:00:14.0+ @ 3534, parent: pci0000:00
[   73.220416] calling  0000:00:1b.0+ @ 3535, parent: pci0000:00
[   73.220436] calling  0000:00:03.0+ @ 3536, parent: pci0000:00
[   73.220457] calling  0000:00:02.0+ @ 3537, parent: pci0000:00
[   73.220459] call 0000:00:14.0+ returned 0 after 43 usecs
[   73.220463] calling  0000:00:00.0+ @ 3534, parent: pci0000:00
[   73.220464] call 0000:00:00.0+ returned 0 after 0 usecs
[   73.220722] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
[   73.220723] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
[   73.241753] call 0000:00:03.0+ returned 0 after 20806 usecs
[   73.243214] call 1-1+ returned 0 after 40105 usecs
[   73.243240] calling  usb1+ @ 3529, parent: 0000:00:1d.0
[   73.243762] call 0000:00:1b.0+ returned 0 after 22786 usecs
[   73.244210] call usb1+ returned 0 after 944 usecs
[   73.244217] calling  0000:00:1d.0+ @ 3533, parent: pci0000:00
[   73.246809] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[   73.246815] [drm:intel_edp_backlight_off], 
[   73.254931] call 0000:00:1d.0+ returned 0 after 10455 usecs
[   73.275756] [drm:intel_edp_panel_off], Turn eDP power off
[   73.447853] [drm:wait_panel_off], Wait for panel power off time
[   73.447858] [drm:wait_panel_status], mask b0000000 value 00000000 status a0000003 control abcd0000
[   73.502871] [drm:wait_panel_status], Wait complete
[   73.502882] [drm:intel_update_fbc], no output, disabling
[   73.514879] call 0000:00:02.0+ returned 0 after 287398 usecs
[   73.689629] call 0:0:0:0+ returned 0 after 475762 usecs
[   73.689658] calling  target0:0:0+ @ 982, parent: host0
[   73.689659] call target0:0:0+ returned 0 after 0 usecs
[   73.689692] calling  host0+ @ 3528, parent: ata1
[   73.689694] call host0+ returned 0 after 0 usecs
[   73.689727] calling  ata1+ @ 3532, parent: 0000:00:1f.2
[   73.689794] call ata1+ returned 0 after 61 usecs
[   73.765909] call 1:0:0:0+ returned 0 after 550249 usecs
[   73.765920] calling  target1:0:0+ @ 24, parent: host1
[   73.765922] call target1:0:0+ returned 0 after 0 usecs
[   73.765932] calling  host1+ @ 3530, parent: ata2
[   73.765934] call host1+ returned 0 after 0 usecs
[   73.765943] calling  ata2+ @ 3531, parent: 0000:00:1f.2
[   73.765982] call ata2+ returned 0 after 36 usecs
[   73.766011] calling  0000:00:1f.2+ @ 1141, parent: pci0000:00
[   73.776991] call 0000:00:1f.2+ returned 0 after 10715 usecs
[   73.777031] PM: suspend of devices complete after 574.810 msecs
[   73.777126] calling  ACPI0003:00+ @ 3472, parent: platform
[   73.777129] call ACPI0003:00+ returned 0 after 1 usecs
[   73.777169] PM: late suspend of devices complete after 0.135 msecs
[   73.777272] calling  0000:02:00.0+ @ 3472, parent: 0000:00:1c.2
[   73.777339] call 0000:02:00.0+ returned 0 after 63 usecs
[   73.777340] calling  0000:00:1f.3+ @ 3472, parent: pci0000:00
[   73.777356] call 0000:00:1f.3+ returned 0 after 14 usecs
[   73.777357] calling  0000:00:1f.2+ @ 3472, parent: pci0000:00
[   73.777358] call 0000:00:1f.2+ returned 0 after 0 usecs
[   73.777359] calling  0000:00:1f.0+ @ 3472, parent: pci0000:00
[   73.777389] call 0000:00:1f.0+ returned 0 after 28 usecs
[   73.777390] calling  0000:00:1d.0+ @ 3472, parent: pci0000:00
[   73.777457] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[   73.787988] call 0000:00:1d.0+ returned 0 after 10344 usecs
[   73.787989] calling  0000:00:1c.3+ @ 3472, parent: pci0000:00
[   73.788017] call 0000:00:1c.3+ returned 0 after 26 usecs
[   73.788018] calling  0000:00:1c.2+ @ 3472, parent: pci0000:00
[   73.788045] call 0000:00:1c.2+ returned 0 after 26 usecs
[   73.788046] calling  0000:00:1c.0+ @ 3472, parent: pci0000:00
[   73.788074] call 0000:00:1c.0+ returned 0 after 26 usecs
[   73.788075] calling  0000:00:1b.0+ @ 3472, parent: pci0000:00
[   73.788076] call 0000:00:1b.0+ returned 0 after 0 usecs
[   73.788077] calling  0000:00:16.0+ @ 3472, parent: pci0000:00
[   73.788100] call 0000:00:16.0+ returned 0 after 22 usecs
[   73.788102] calling  0000:00:14.0+ @ 3472, parent: pci0000:00
[   73.788127] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[   73.798985] call 0000:00:14.0+ returned 0 after 10622 usecs
[   73.798986] calling  0000:00:03.0+ @ 3472, parent: pci0000:00
[   73.798987] call 0000:00:03.0+ returned 0 after 0 usecs
[   73.798988] calling  0000:00:02.0+ @ 3472, parent: pci0000:00
[   73.798989] call 0000:00:02.0+ returned 0 after 0 usecs
[   73.798990] calling  0000:00:00.0+ @ 3472, parent: pci0000:00
[   73.799001] call 0000:00:00.0+ returned 0 after 10 usecs
[   73.799025] PM: noirq suspend of devices complete after 21.845 msecs
[   73.799394] ACPI: Preparing to enter system sleep state S3
[   73.800786] PM: Saving platform NVS memory
[   73.801433] Disabling non-boot CPUs ...
[   73.802661] smpboot: CPU 1 is now offline
[   73.804844] smpboot: CPU 2 is now offline
[   73.805177] Broke affinity for irq 23
[   73.805181] Broke affinity for irq 60
[   73.806202] smpboot: CPU 3 is now offline
[   73.806383] PM: Calling mce_syscore_suspend+0x0/0x2
[   73.806390] PM: Calling acpi_processor_suspend+0x0/0x16
[   73.806394] PM: Calling timekeeping_suspend+0x0/0x139
[   73.806420] PM: Calling save_ioapic_entries+0x0/0x5f
[   73.806555] PM: Calling i8259A_suspend+0x0/0x1e
[   73.806563] PM: Calling fw_suspend+0x0/0xd
[   73.806568] PM: Calling cpufreq_bp_suspend+0x0/0x5c
[   73.806574] PM: Calling lapic_suspend+0x0/0x168
[   73.807854] ACPI: Low-level resume complete
[   73.807959] PM: Restoring platform NVS memory
[   73.808128] PM: Calling lapic_resume+0x0/0x20b
[   73.808163] PM: Calling cpufreq_bp_resume+0x0/0x62
[   73.808174] PM: Calling irqrouter_resume+0x0/0x35
[   73.808177] PM: Calling i8259A_resume+0x0/0x26
[   73.808331] PM: Calling i8237A_resume+0x0/0x80
[   73.808481] PM: Calling ioapic_resume+0x0/0x6e
[   73.808540] PM: Calling irq_pm_syscore_resume+0x0/0xa
[   73.808551] PM: Calling timekeeping_resume+0x0/0x15c
[   73.808609] PM: Calling acpi_processor_resume+0x0/0x2e
[   73.808615] PM: Calling mce_syscore_resume+0x0/0x1c
[   73.808629] CPU0: Thermal LVT vector (0xfa) already installed
[   73.808652] Enabling non-boot CPUs ...
[   73.808679] x86: Booting SMP configuration:
[   73.808680] smpboot: Booting Node 0 Processor 1 APIC 0x1
[   73.819910] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[   73.821156] CPU1: Thermal LVT vector (0xfa) already installed
[   73.823478] CPU1 is up
[   73.823494] smpboot: Booting Node 0 Processor 2 APIC 0x2
[   73.835888] CPU2: Thermal LVT vector (0xfa) already installed
[   73.838209] CPU2 is up
[   73.838224] smpboot: Booting Node 0 Processor 3 APIC 0x3
[   73.850615] CPU3: Thermal LVT vector (0xfa) already installed
[   73.852972] CPU3 is up
[   73.857146] ACPI: Waking up from system sleep state S3
[   73.884111] calling  0000:00:00.0+ @ 3472, parent: pci0000:00
[   73.884126] call 0000:00:00.0+ returned 0 after 13 usecs
[   73.884127] calling  0000:00:02.0+ @ 3472, parent: pci0000:00
[   73.894228] call 0000:00:02.0+ returned 0 after 9858 usecs
[   73.894229] calling  0000:00:03.0+ @ 3472, parent: pci0000:00
[   73.905225] call 0000:00:03.0+ returned 0 after 10732 usecs
[   73.905226] calling  0000:00:14.0+ @ 3472, parent: pci0000:00
[   73.916308] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[   73.916314] call 0000:00:14.0+ returned 0 after 10822 usecs
[   73.916315] calling  0000:00:16.0+ @ 3472, parent: pci0000:00
[   73.916382] call 0000:00:16.0+ returned 0 after 64 usecs
[   73.916383] calling  0000:00:1b.0+ @ 3472, parent: pci0000:00
[   73.927275] call 0000:00:1b.0+ returned 0 after 10631 usecs
[   73.927276] calling  0000:00:1c.0+ @ 3472, parent: pci0000:00
[   73.927401] call 0000:00:1c.0+ returned 0 after 120 usecs
[   73.927402] calling  0000:00:1c.2+ @ 3472, parent: pci0000:00
[   73.927518] call 0000:00:1c.2+ returned 0 after 111 usecs
[   73.927519] calling  0000:00:1c.3+ @ 3472, parent: pci0000:00
[   73.927628] call 0000:00:1c.3+ returned 0 after 106 usecs
[   73.927629] calling  0000:00:1d.0+ @ 3472, parent: pci0000:00
[   73.938313] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[   73.938319] call 0000:00:1d.0+ returned 0 after 10434 usecs
[   73.938320] calling  0000:00:1f.0+ @ 3472, parent: pci0000:00
[   73.938383] call 0000:00:1f.0+ returned 0 after 60 usecs
[   73.938384] calling  0000:00:1f.2+ @ 3472, parent: pci0000:00
[   73.949296] call 0000:00:1f.2+ returned 0 after 10650 usecs
[   73.949297] calling  0000:00:1f.3+ @ 3472, parent: pci0000:00
[   73.949337] call 0000:00:1f.3+ returned 0 after 38 usecs
[   73.949338] calling  0000:02:00.0+ @ 3472, parent: 0000:00:1c.2
[   73.949433] call 0000:02:00.0+ returned 0 after 91 usecs
[   73.949481] PM: noirq resume of devices complete after 65.360 msecs
[   73.949530] calling  ACPI0003:00+ @ 3472, parent: platform
[   73.949532] call ACPI0003:00+ returned 0 after 0 usecs
[   73.949597] PM: early resume of devices complete after 0.094 msecs
[   73.949613] calling  0000:00:00.0+ @ 3534, parent: pci0000:00
[   73.949616] call 0000:00:00.0+ returned 0 after 1 usecs
[   73.949620] calling  0000:00:02.0+ @ 1141, parent: pci0000:00
[   73.949622] calling  0000:00:03.0+ @ 3534, parent: pci0000:00
[   73.949626] calling  0000:00:14.0+ @ 3531, parent: pci0000:00
[   73.949684] calling  PNP0C0A:00+ @ 3472, parent: device:00
[   73.949690] call 0000:00:14.0+ returned 0 after 61 usecs
[   73.949693] calling  0000:00:16.0+ @ 3531, parent: pci0000:00
[   73.949694] call 0000:00:16.0+ returned 0 after 0 usecs
[   73.949696] calling  0000:00:1b.0+ @ 3531, parent: pci0000:00
[   73.949700] calling  0000:00:1c.0+ @ 3530, parent: pci0000:00
[   73.949708] call 0000:00:1c.0+ returned 0 after 6 usecs
[   73.949710] calling  0000:00:1c.2+ @ 3530, parent: pci0000:00
[   73.949717] call 0000:00:1c.2+ returned 0 after 5 usecs
[   73.949719] calling  0000:00:1c.3+ @ 3530, parent: pci0000:00
[   73.949725] call 0000:00:1c.3+ returned 0 after 4 usecs
[   73.949727] calling  0000:00:1d.0+ @ 3530, parent: pci0000:00
[   73.949738] calling  0000:00:1f.0+ @ 24, parent: pci0000:00
[   73.949740] call 0000:00:1f.0+ returned 0 after 0 usecs
[   73.949742] calling  0000:00:1f.2+ @ 24, parent: pci0000:00
[   73.949756] calling  0000:00:1f.3+ @ 984, parent: pci0000:00
[   73.949765] calling  0000:02:00.0+ @ 3532, parent: 0000:00:1c.2
[   73.949767] call 0000:02:00.0+ returned 0 after 0 usecs
[   73.949781] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
[   73.949870] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
[   73.949984] call 0000:00:1d.0+ returned 0 after 249 usecs
[   73.949989] calling  usb2+ @ 3530, parent: 0000:00:14.0
[   73.949999] calling  usb1+ @ 3536, parent: 0000:00:1d.0
[   73.950140] call 0000:00:1f.3+ returned 0 after 372 usecs
[   73.950180] calling  usb3+ @ 3554, parent: 0000:00:14.0
[   73.950232] call usb3+ returned 0 after 48 usecs
[   73.951657] [drm:intel_opregion_setup], graphic opregion physical addr: 0x90fb1018
[   73.951674] [drm:intel_opregion_setup], Public ACPI methods supported
[   73.951675] [drm:intel_opregion_setup], SWSCI supported
[   73.952327] call 0000:00:03.0+ returned 0 after 2639 usecs
[   73.955187] call 0000:00:1b.0+ returned 0 after 5357 usecs
[   73.960227] call 0000:00:1f.2+ returned 0 after 10233 usecs
[   73.960233] calling  ata1+ @ 3532, parent: 0000:00:1f.2
[   73.960235] calling  ata2+ @ 3528, parent: 0000:00:1f.2
[   73.960236] calling  ata3+ @ 982, parent: 0000:00:1f.2
[   73.960265] call ata3+ returned 0 after 26 usecs
[   73.960270] calling  host2+ @ 3535, parent: ata3
[   73.960273] call host2+ returned 0 after 0 usecs
[   73.981305] call usb1+ returned 0 after 30556 usecs
[   73.981319] calling  1-1+ @ 3560, parent: usb1
[   73.989147] call PNP0C0A:00+ returned 0 after 38519 usecs
[   73.989149] calling  PNP0C0D:00+ @ 3472, parent: device:00
[   73.989579] call PNP0C0D:00+ returned 0 after 418 usecs
[   73.989580] calling  PNP0C0C:00+ @ 3472, parent: device:00
[   73.989581] call PNP0C0C:00+ returned 0 after 0 usecs
[   73.989584] calling  LNXTHERM:00+ @ 3472, parent: device:4a
[   73.993009] call LNXTHERM:00+ returned 0 after 3341 usecs
[   73.993013] calling  VPC2004:00+ @ 3472, parent: platform
[   73.993014] call VPC2004:00+ returned 0 after 0 usecs
[   73.993016] calling  ACPI0003:00+ @ 3472, parent: platform
[   73.993463] call ACPI0003:00+ returned 0 after 433 usecs
[   73.993466] calling  LNXPWRBN:00+ @ 3472, parent: LNXSYSTM:00
[   73.993467] call LNXPWRBN:00+ returned 0 after 0 usecs
[   73.993469] calling  00:00+ @ 3472, parent: pnp0
[   73.993470] call 00:00+ returned 0 after 0 usecs
[   73.993471] calling  00:01+ @ 3472, parent: pnp0
[   73.993472] call 00:01+ returned 0 after 0 usecs
[   73.993473] calling  00:02+ @ 3472, parent: pnp0
[   73.993473] call 00:02+ returned 0 after 0 usecs
[   73.993474] calling  00:03+ @ 3472, parent: pnp0
[   73.993476] call 00:03+ returned 0 after 0 usecs
[   73.993477] calling  00:04+ @ 3472, parent: pnp0
[   73.993479] call 00:04+ returned 0 after 1 usecs
[   73.993480] calling  00:05+ @ 3472, parent: pnp0
[   73.993481] call 00:05+ returned 0 after 0 usecs
[   73.993482] calling  00:06+ @ 3472, parent: pnp0
[   73.993487] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -19
[   73.993488] call 00:06+ returned -19 after 4 usecs
[   73.993490] PM: Device 00:06 failed to resume: error -19
[   73.993491] calling  00:07+ @ 3472, parent: pnp0
[   73.993492] call 00:07+ returned 0 after 0 usecs
[   73.993493] calling  00:08+ @ 3472, parent: pnp0
[   73.993494] call 00:08+ returned 0 after 0 usecs
[   73.993512] calling  pcspkr+ @ 3472, parent: platform
[   73.993513] call pcspkr+ returned 0 after 0 usecs
[   73.993514] calling  platform-framebuffer.0+ @ 3472, parent: platform
[   73.993515] call platform-framebuffer.0+ returned 0 after 0 usecs
[   73.993517] calling  alarmtimer+ @ 3472, parent: platform
[   73.993518] call alarmtimer+ returned 0 after 0 usecs
[   73.993524] calling  serial8250+ @ 3472, parent: platform
[   73.993525] call serial8250+ returned 0 after 0 usecs
[   74.003278] [drm:swsci], SWSCI request timed out
[   74.003280] [drm:swsci], SWSCI request already in progress
[   74.003282] [drm:swsci_setup], SWSCI GBDA callbacks 00000001, SBCB callbacks 00000001
[   74.003283] [drm:intel_opregion_setup], ASLE supported
[   74.009304] [drm:init_status_page], render ring hws offset: 0x00220000
[   74.011308] [drm:init_pipe_control], render ring pipe control offset: 0x00241000
[   74.011316] [drm:init_status_page], bsd ring hws offset: 0x00242000
[   74.011384] [drm:init_status_page], blitter ring hws offset: 0x00263000
[   74.011446] [drm:init_status_page], video enhancement ring hws offset: 0x00284000
[   74.011628] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[   74.011630] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
[   74.011632] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
[   74.011635] [drm:intel_modeset_readout_hw_state], [ENCODER:9:TMDS-9] hw state readout: disabled, pipe A
[   74.011638] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
[   74.011640] [drm:intel_modeset_readout_hw_state], [CONNECTOR:10:eDP-1] hw state readout: disabled
[   74.011642] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-1] hw state readout: disabled
[   74.011645] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[   74.011646] [drm:intel_dump_pipe_config], cpu_transcoder: A
[   74.011648] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[   74.011650] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   74.011651] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   74.011652] [drm:intel_dump_pipe_config], requested mode:
[   74.011655] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   74.011656] [drm:intel_dump_pipe_config], adjusted mode:
[   74.011658] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   74.011660] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[   74.011661] [drm:intel_dump_pipe_config], port clock: 0
[   74.011662] [drm:intel_dump_pipe_config], pipe src size: 0x0
[   74.011664] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   74.011665] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   74.011666] [drm:intel_dump_pipe_config], ips: 0
[   74.011667] [drm:intel_dump_pipe_config], double wide: 0
[   74.011669] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
[   74.011670] [drm:intel_dump_pipe_config], cpu_transcoder: B
[   74.011671] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[   74.011673] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   74.011674] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   74.011675] [drm:intel_dump_pipe_config], requested mode:
[   74.011677] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   74.011678] [drm:intel_dump_pipe_config], adjusted mode:
[   74.011680] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   74.011682] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[   74.011683] [drm:intel_dump_pipe_config], port clock: 0
[   74.011683] [drm:intel_dump_pipe_config], pipe src size: 0x0
[   74.011685] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   74.011686] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   74.011687] [drm:intel_dump_pipe_config], ips: 0
[   74.011688] [drm:intel_dump_pipe_config], double wide: 0
[   74.011690] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
[   74.011690] [drm:intel_dump_pipe_config], cpu_transcoder: C
[   74.011691] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[   74.011693] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   74.011694] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   74.011695] [drm:intel_dump_pipe_config], requested mode:
[   74.011697] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   74.011698] [drm:intel_dump_pipe_config], adjusted mode:
[   74.011700] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   74.011702] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[   74.011703] [drm:intel_dump_pipe_config], port clock: 0
[   74.011704] [drm:intel_dump_pipe_config], pipe src size: 0x0
[   74.011705] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   74.011706] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   74.011707] [drm:intel_dump_pipe_config], ips: 0
[   74.011708] [drm:intel_dump_pipe_config], double wide: 0
[   74.011714] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[   74.011717] [drm:connected_sink_compute_bpp], [CONNECTOR:10:eDP-1] checking for sink bpp constrains
[   74.011718] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
[   74.011721] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 75600KHz
[   74.011723] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
[   74.011725] [drm:intel_dp_compute_config], DP link bw required 136080 available 216000
[   74.011727] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[   74.011728] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[   74.011729] [drm:intel_dump_pipe_config], cpu_transcoder: P
[   74.011730] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[   74.011732] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   74.011734] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 2642411, gmch_n: 4194304, link_m: 146800, link_n: 524288, tu: 64
[   74.011734] [drm:intel_dump_pipe_config], requested mode:
[   74.011737] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
[   74.011738] [drm:intel_dump_pipe_config], adjusted mode:
[   74.011740] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
[   74.011743] [drm:intel_dump_crtc_timings], crtc timings: 75600 1366 1404 1426 1592 768 771 777 790, type: 0x48 flags: 0xa
[   74.011744] [drm:intel_dump_pipe_config], port clock: 270000
[   74.011745] [drm:intel_dump_pipe_config], pipe src size: 1366x768
[   74.011746] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   74.011747] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   74.011748] [drm:intel_dump_pipe_config], ips: 1
[   74.011749] [drm:intel_dump_pipe_config], double wide: 0
[   74.011773] [drm:ironlake_update_plane], Writing base 002A5000 00000000 0 0 5504
[   74.011778] [drm:intel_crtc_mode_set], [ENCODER:9:TMDS-9] set [MODE:0:1366x768]
[   74.011779] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
[   74.011781] [drm:intel_edp_panel_on], Turn eDP power on
[   74.011783] [drm:wait_panel_power_cycle], Wait for panel power cycle
[   74.051283] [drm:wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
[   74.051285] [drm:wait_panel_status], Wait complete
[   74.051289] [drm:wait_panel_on], Wait for panel power on
[   74.051292] [drm:wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
[   74.083317] call 1-1+ returned 0 after 99563 usecs
[   74.145339] call usb2+ returned 0 after 190688 usecs
[   74.145372] calling  2-5+ @ 3580, parent: usb2
[   74.145380] calling  2-2+ @ 3572, parent: usb2
[   74.145386] calling  2-6+ @ 3586, parent: usb2
[   74.145429] call 2-2+ returned 0 after 46 usecs
[   74.260388] [drm:wait_panel_status], Wait complete
[   74.261480] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[   74.261918] [drm:intel_dp_start_link_train], clock recovery OK
[   74.262658] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[   74.265359] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   74.266039] ata1.00: configured for UDMA/133
[   74.266051] call ata1+ returned 0 after 298523 usecs
[   74.266059] calling  host0+ @ 983, parent: ata1
[   74.266062] call host0+ returned 0 after 0 usecs
[   74.266075] calling  target0:0:0+ @ 3554, parent: host0
[   74.266078] call target0:0:0+ returned 0 after 0 usecs
[   74.266097] calling  0:0:0:0+ @ 3555, parent: target0:0:0
[   74.266101] sd 0:0:0:0: [sda] Starting disk
[   74.266168] call 0:0:0:0+ returned 0 after 66 usecs
[   74.298575] usb 2-5: reset high-speed USB device number 3 using xhci_hcd
[   74.314408] [drm:g4x_wait_for_vblank], vblank wait timed out
[   74.314589] [drm:intel_edp_backlight_on], 
[   74.314603] [drm:intel_panel_enable_backlight], pipe A
[   74.314608] [drm:intel_panel_actually_set_backlight], set backlight PWM = 765
[   74.314614] [drm:intel_edp_psr_match_conditions], PSR condition failed: fb not tiled or fenced
[   74.337205] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a361300
[   74.337208] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015a361340
[   74.338926] call 2-5+ returned 0 after 188936 usecs
[   74.348421] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
[   74.366413] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[   74.366418] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[   74.366421] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
[   74.366424] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
[   74.366426] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
[   74.366428] [drm:check_crtc_state], [CRTC:3]
[   74.366435] [drm:check_crtc_state], [CRTC:5]
[   74.366437] [drm:check_crtc_state], [CRTC:7]
[   74.366445] [drm:intel_resume_hotplug], running encoder hotplug functions
[   74.366903] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00
[   74.367345] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[   74.367502] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   74.367505] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   74.367508] [drm:drm_helper_hpd_irq_event], [CONNECTOR:18:HDMI-A-1] status updated from unknown to disconnected
[   74.367529] [drm:drm_fb_helper_hotplug_event], 
[   74.367531] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
[   74.367534] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
[   74.367536] [drm:edp_panel_vdd_on], Turning eDP VDD on
[   74.367544] [drm:edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[   74.367707] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
[   74.367868] [drm:intel_dp_probe_oui], Branch OUI: 000000
[   74.367881] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   74.367884] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
[   74.367889] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
[   74.367892] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[   74.367893] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
[   74.368048] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   74.368050] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   74.368053] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
[   74.368054] [drm:drm_setup_crtcs], 
[   74.368056] [drm:drm_enable_connectors], connector 10 enabled? yes
[   74.368058] [drm:drm_enable_connectors], connector 18 enabled? no
[   74.368060] [drm:drm_target_preferred], looking for cmdline mode on connector 10
[   74.368061] [drm:drm_target_preferred], looking for preferred mode on connector 10
[   74.368063] [drm:drm_target_preferred], found mode 1366x768
[   74.368065] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[   74.368067] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
[   74.368072] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[   74.368075] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[   74.368077] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[   74.368080] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[   74.368082] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[   74.368085] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[   74.368086] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[   74.368089] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[   74.368090] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[   74.369033] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[   74.369036] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[   74.369038] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
[   74.369402] call 0000:00:02.0+ returned 0 after 409768 usecs
[   74.463655] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
[   74.475168] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c436cc0
[   74.475170] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c436d00
[   74.475172] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c436d40
[   74.475174] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880159d43580
[   74.475175] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880159d435c0
[   74.475665] call 2-6+ returned 0 after 322399 usecs
[   75.749030] [drm:intel_print_rc6_info], Haswell: only RC6 available
[   75.749031] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   76.000149] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   76.100338] ata2.00: configured for UDMA/133
[   76.100354] call ata2+ returned 0 after 2089083 usecs
[   76.100376] calling  i8042+ @ 3472, parent: platform
[   76.100383] calling  host1+ @ 3533, parent: ata2
[   76.100386] call host1+ returned 0 after 0 usecs
[   76.100398] calling  target1:0:0+ @ 3557, parent: host1
[   76.100399] call target1:0:0+ returned 0 after 0 usecs
[   76.100405] calling  1:0:0:0+ @ 3558, parent: target1:0:0
[   76.100410] sd 1:0:0:0: [sdb] Starting disk
[   76.108429] call i8042+ returned 0 after 7858 usecs
[   76.108438] calling  serio0+ @ 3472, parent: i8042
[   76.108440] call serio0+ returned 0 after 1 usecs
[   76.108605] calling  serio1+ @ 3472, parent: i8042
[   76.108607] call serio1+ returned 0 after 0 usecs
[   76.108610] calling  rtc0+ @ 3472, parent: 00:04
[   76.108611] call rtc0+ returned 0 after 0 usecs
[   76.108614] calling  input0+ @ 3472, parent: serio0
[   76.108626] call input0+ returned 0 after 10 usecs
[   76.127466] call 1:0:0:0+ returned 0 after 26411 usecs
[   76.127483] calling  input2+ @ 3472, parent: serio1
[   76.127485] call input2+ returned 0 after 0 usecs
[   76.127488] calling  input3+ @ 3472, parent: PNP0C0D:00
[   76.127490] call input3+ returned 0 after 0 usecs
[   76.127492] calling  input4+ @ 3472, parent: PNP0C0C:00
[   76.127505] call input4+ returned 0 after 12 usecs
[   76.127507] calling  input5+ @ 3472, parent: LNXPWRBN:00
[   76.127515] call input5+ returned 0 after 6 usecs
[   76.127518] calling  controlD64+ @ 3472, parent: 0000:00:02.0
[   76.127519] call controlD64+ returned 0 after 0 usecs
[   76.127521] calling  card0+ @ 3472, parent: 0000:00:02.0
[   76.127522] call card0+ returned 0 after 0 usecs
[   76.127524] calling  i2c-0+ @ 3472, parent: 0000:00:02.0
[   76.127525] call i2c-0+ returned 0 after 0 usecs
[   76.127527] calling  i2c-1+ @ 3472, parent: 0000:00:02.0
[   76.127528] call i2c-1+ returned 0 after 0 usecs
[   76.127530] calling  i2c-2+ @ 3472, parent: 0000:00:02.0
[   76.127531] call i2c-2+ returned 0 after 0 usecs
[   76.127533] calling  i2c-3+ @ 3472, parent: 0000:00:02.0
[   76.127534] call i2c-3+ returned 0 after 0 usecs
[   76.127535] calling  i2c-4+ @ 3472, parent: 0000:00:02.0
[   76.127537] call i2c-4+ returned 0 after 0 usecs
[   76.127538] calling  i2c-5+ @ 3472, parent: 0000:00:02.0
[   76.127539] call i2c-5+ returned 0 after 0 usecs
[   76.127541] calling  card0-eDP-1+ @ 3472, parent: card0
[   76.127542] call card0-eDP-1+ returned 0 after 0 usecs
[   76.127544] calling  i2c-6+ @ 3472, parent: card0-eDP-1
[   76.127545] call i2c-6+ returned 0 after 0 usecs
[   76.127547] calling  intel_backlight+ @ 3472, parent: card0-eDP-1
[   76.127548] call intel_backlight+ returned 0 after 0 usecs
[   76.127550] calling  card0-HDMI-A-1+ @ 3472, parent: card0
[   76.127551] call card0-HDMI-A-1+ returned 0 after 0 usecs
[   76.127553] calling  acpi_video0+ @ 3472, parent: 0000:00:02.0
[   76.127555] call acpi_video0+ returned 0 after 0 usecs
[   76.127557] calling  input6+ @ 3472, parent: LNXVIDEO:00
[   76.127565] call input6+ returned 0 after 6 usecs
[   76.127568] calling  iTCO_wdt+ @ 3472, parent: 0000:00:1f.0
[   76.127569] call iTCO_wdt+ returned 0 after 0 usecs
[   76.127572] calling  input7+ @ 3472, parent: 2-5:1.0
[   76.127579] call input7+ returned 0 after 6 usecs
[   76.127584] calling  input8+ @ 3472, parent: pcspkr
[   76.127597] call input8+ returned 0 after 12 usecs
[   76.127606] PM: resume of devices complete after 2177.096 msecs
[   76.538201] PM: Finishing wakeup.
[   76.538203] Restarting tasks ... done.
[   76.540795] video LNXVIDEO:00: Restoring backlight state
[   77.369721] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off
[   77.369731] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  169.247425] usb 2-2: USB disconnect, device number 2
[  169.248672] asix 2-2:1.0 enp0s20u2: unregister 'asix' usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet
[  171.876284] usb 2-2: new high-speed USB device number 5 using xhci_hcd
[  171.903738] usb 2-2: New USB device found, idVendor=0b95, idProduct=772b
[  171.904898] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  171.906059] usb 2-2: Product: AX88772B
[  171.907190] usb 2-2: Manufacturer: ASIX Elec. Corp.
[  171.908329] usb 2-2: SerialNumber: 00001B
[  172.215241] asix 2-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:86:27
[  172.235478] systemd-udevd[3639]: renamed network interface eth0 to enp0s20u2
[  174.728564] asix 2-2:1.0 enp0s20u2: link up, 100Mbps, full-duplex, lpa 0x43E1
[  300.839086] mce: [Hardware Error]: Machine check events logged