[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0_drm-intel-next-queued_4c0e55_20140219+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #198 SMP Wed Feb 19 08:44:53 CST 2014 [ 0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_02_19/drm-intel-next-queued/4c0e552882114d1edb588242d45035246ab078a0/bzImage_x86_64 root=/dev/sda4 acpi_rsdp=0x000000007951c014 drm.debug=0xe modules_path=kernels//nightly_parents/2014_02_19/drm-intel-next-queued/4c0e552882114d1edb588242d45035246ab078a0/modules_x86_64/lib/modules/3.13.0_drm-intel-next-queued_4c0e55_20140219+ acpi_rsdp=0x7951c014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000078adcfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078add000-0x00000000793dcfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000793dd000-0x00000000794dcfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000794dd000-0x000000007951cfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007951d000-0x0000000079ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 1 base 000000000 mask FC0000000 write-back [ 0.000000] 2 base 040000000 mask FE0000000 write-back [ 0.000000] 3 base 060000000 mask FF0000000 write-back [ 0.000000] 4 base 070000000 mask FF8000000 write-back [ 0.000000] 5 base 078000000 mask FFC000000 write-back [ 0.000000] 6 base 07B000000 mask FFF000000 uncachable [ 0.000000] 7 base 07AE00000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0320c000, 0x0320cfff] PGTABLE [ 0.000000] BRK [0x0320d000, 0x0320dfff] PGTABLE [ 0.000000] BRK [0x0320e000, 0x0320efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x79e00000-0x79ffffff] [ 0.000000] [mem 0x79e00000-0x79ffffff] page 2M [ 0.000000] BRK [0x0320f000, 0x0320ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x78000000-0x78adcfff] [ 0.000000] [mem 0x78000000-0x789fffff] page 2M [ 0.000000] [mem 0x78a00000-0x78adcfff] page 4k [ 0.000000] BRK [0x03210000, 0x03210fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7951d000-0x79dfffff] [ 0.000000] [mem 0x7951d000-0x795fffff] page 4k [ 0.000000] [mem 0x79600000-0x79dfffff] page 2M [ 0.000000] BRK [0x03211000, 0x03211fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff] [ 0.000000] [mem 0x20100000-0x201fffff] page 4k [ 0.000000] [mem 0x20200000-0x77ffffff] page 2M [ 0.000000] ACPI: RSDP 000000007951c014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 000000007951b0e8 00008C (v01 INTEL EDK2 00000003 01000013) [ 0.000000] ACPI: FACP 0000000079519000 00010C (v05 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: DSDT 0000000079509000 00B1A0 (v02 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: FACS 000000007947c000 000040 [ 0.000000] ACPI: SSDT 000000007951a000 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20120518) [ 0.000000] ACPI: UEFI 0000000079485000 000042 (v01 00000000 00000000) [ 0.000000] ACPI: HPET 0000000079518000 000038 (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: LPIT 0000000079517000 000104 (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: APIC 0000000079516000 000084 (v03 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: MCFG 0000000079515000 00003C (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0000000079503000 00080A (v01 INTEL SgPch 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0000000079502000 000763 (v01 PmRef CpuPm 00003000 INTL 20120518) [ 0.000000] ACPI: SSDT 0000000079501000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120518) [ 0.000000] ACPI: SSDT 0000000079500000 00017A (v01 PmRef ApTst 00003000 INTL 20120518) [ 0.000000] ACPI: SSDT 00000000794ff000 0003E6 (v01 Intel_ IsctTabl 00001000 INTL 20120518) [ 0.000000] ACPI: FPDT 00000000794fe000 000044 (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x79ffffff] [ 0.000000] NODE_DATA [mem 0x79ffb000-0x79ffefff] [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076a00000-ffff8800789fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008efff] [ 0.000000] node 0: [mem 0x00090000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20100000-0x78adcfff] [ 0.000000] node 0: [mem 0x7951d000-0x79ffffff] [ 0.000000] On node 0 totalpages: 496732 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7744 pages used for memmap [ 0.000000] DMA32 zone: 492736 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 103 [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x78add000-0x793dcfff] [ 0.000000] PM: Registered nosave memory: [mem 0x793dd000-0x794dcfff] [ 0.000000] PM: Registered nosave memory: [mem 0x794dd000-0x7951cfff] [ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880079c00000 s74496 r8192 d23808 u524288 [ 0.000000] pcpu-alloc: s74496 r8192 d23808 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 488903 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_02_19/drm-intel-next-queued/4c0e552882114d1edb588242d45035246ab078a0/bzImage_x86_64 root=/dev/sda4 acpi_rsdp=0x000000007951c014 drm.debug=0xe modules_path=kernels//nightly_parents/2014_02_19/drm-intel-next-queued/4c0e552882114d1edb588242d45035246ab078a0/modules_x86_64/lib/modules/3.13.0_drm-intel-next-queued_4c0e55_20140219+ acpi_rsdp=0x7951c014 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1918640K/1986928K available (7294K kernel code, 703K rwdata, 3544K rodata, 22684K init, 588K bss, 68288K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2133.421 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.84 BogoMIPS (lpj=2133421) [ 0.000013] pid_max: default: 32768 minimum: 301 [ 0.000050] Security Framework initialized [ 0.000259] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001193] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001657] Mount-cache hash table entries: 256 [ 0.001965] CPU: Physical Processor ID: 0 [ 0.001972] CPU: Processor Core ID: 0 [ 0.007886] mce: CPU supports 6 MCE banks [ 0.007897] CPU0: Thermal LVT vector (0xfa) already installed [ 0.007907] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0 tlb_flushall_shift: 6 [ 0.008050] Freeing SMP alternatives memory: 32K (ffffffff83170000 - ffffffff83178000) [ 0.008058] ACPI: Core revision 20131115 [ 0.020563] ACPI: All ACPI Tables successfully acquired [ 0.021660] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.031668] smpboot: CPU0: Intel(R) Celeron(R) CPU N2820 @ 2.13GHz (fam: 06, model: 37, stepping: 03) [ 0.031686] TSC deadline timer enabled [ 0.031699] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.031716] ... version: 3 [ 0.031720] ... bit width: 40 [ 0.031724] ... generic registers: 2 [ 0.031728] ... value mask: 000000ffffffffff [ 0.031733] ... max period: 000000ffffffffff [ 0.031737] ... fixed-purpose events: 3 [ 0.031741] ... event mask: 0000000700000003 [ 0.032156] x86: Booting SMP configuration: [ 0.049039] CPU1: Thermal LVT vector (0xfa) already installed [ 0.032163] .... node #0, CPUs: #1 [ 0.051164] x86: Booted up 1 node, 2 CPUs [ 0.051176] smpboot: Total of 2 processors activated (8533.68 BogoMIPS) [ 0.051677] devtmpfs: initialized [ 0.052149] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.052158] PM: Registering ACPI NVS region [mem 0x793dd000-0x794dcfff] (1048576 bytes) [ 0.052367] xor: measuring software checksum speed [ 0.062134] prefetch64-sse: 7452.000 MB/sec [ 0.072149] generic_sse: 6620.000 MB/sec [ 0.072155] xor: using function: prefetch64-sse (7452.000 MB/sec) [ 0.072180] RTC time: 4:20:42, date: 01/02/01 [ 0.072251] NET: Registered protocol family 16 [ 0.072970] cpuidle: using governor ladder [ 0.072977] cpuidle: using governor menu [ 0.073121] ACPI: bus type PCI registered [ 0.073243] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.073252] PCI: not using MMCONFIG [ 0.073256] PCI: Using configuration type 1 for base access [ 0.093593] bio: create slab at 0 [ 0.110302] raid6: sse2x1 523 MB/s [ 0.127317] raid6: sse2x2 632 MB/s [ 0.144363] raid6: sse2x4 1031 MB/s [ 0.144369] raid6: using algorithm sse2x4 (1031 MB/s) [ 0.144374] raid6: using ssse3x2 recovery algorithm [ 0.144487] ACPI: Added _OSI(Module Device) [ 0.144494] ACPI: Added _OSI(Processor Device) [ 0.144498] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.144503] ACPI: Added _OSI(Processor Aggregator Device) [ 0.164236] ACPI: SSDT 00000000793d4598 0004DF (v01 PmRef Cpu0Ist 00003000 INTL 20120518) [ 0.164960] ACPI: Dynamic OEM Table Load: [ 0.164968] ACPI: SSDT (null) 0004DF (v01 PmRef Cpu0Ist 00003000 INTL 20120518) [ 0.165149] ACPI: SSDT 00000000793d3918 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20120518) [ 0.165857] ACPI: Dynamic OEM Table Load: [ 0.165865] ACPI: SSDT (null) 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20120518) [ 0.173788] ACPI: SSDT 00000000793d6e18 00015F (v01 PmRef ApIst 00003000 INTL 20120518) [ 0.174535] ACPI: Dynamic OEM Table Load: [ 0.174543] ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20120518) [ 0.178524] ACPI: SSDT 00000000793d5f18 00008D (v01 PmRef ApCst 00003000 INTL 20120518) [ 0.179231] ACPI: Dynamic OEM Table Load: [ 0.179238] ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20120518) [ 0.415821] ACPI: Interpreter enabled [ 0.415834] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.415847] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.415877] ACPI: (supports S0 S3 S4 S5) [ 0.415883] ACPI: Using IOAPIC for interrupt routing [ 0.415925] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.416632] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources [ 0.422030] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.422363] ACPI: No dock devices found. [ 0.427559] ACPI: Power Resource [PC05] (on) [ 0.435956] ACPI: Power Resource [USBC] (on) [ 0.440614] ACPI: Power Resource [FN00] (off) [ 0.441628] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.441643] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.441719] \_SB_.PCI0:_OSC invalid UUID [ 0.441722] _OSC request data:1 1f 0 [ 0.441729] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.442184] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.442277] PCI host bridge to bus 0000:00 [ 0.442287] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.442294] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.442301] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.442308] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.442315] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.442322] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.442329] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.442336] pci_bus 0000:00: root bus resource [mem 0x90800000-0x90bfffff] [ 0.442342] pci_bus 0000:00: root bus resource [mem 0x80000000-0x906ffffe] [ 0.442359] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.442543] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.442561] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff] [ 0.442575] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 0.442588] pci 0000:00:02.0: reg 0x20: [io 0x1050-0x1057] [ 0.442789] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.442812] pci 0000:00:13.0: reg 0x10: [io 0x1048-0x104f] [ 0.442824] pci 0000:00:13.0: reg 0x14: [io 0x105c-0x105f] [ 0.442850] pci 0000:00:13.0: reg 0x18: [io 0x1040-0x1047] [ 0.442862] pci 0000:00:13.0: reg 0x1c: [io 0x1058-0x105b] [ 0.442874] pci 0000:00:13.0: reg 0x20: [io 0x1020-0x103f] [ 0.442885] pci 0000:00:13.0: reg 0x24: [mem 0x90617000-0x906177ff] [ 0.442936] pci 0000:00:13.0: PME# supported from D3hot [ 0.443095] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.443118] pci 0000:00:14.0: reg 0x10: [mem 0x90600000-0x9060ffff 64bit] [ 0.443181] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.443274] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.443388] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.443418] pci 0000:00:1a.0: reg 0x10: [mem 0x90500000-0x905fffff] [ 0.443433] pci 0000:00:1a.0: reg 0x14: [mem 0x90400000-0x904fffff] [ 0.443540] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.443706] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.443733] pci 0000:00:1b.0: reg 0x10: [mem 0x90610000-0x90613fff 64bit] [ 0.443822] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.443976] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.444041] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.444113] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.444208] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.444272] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.444346] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.444443] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.444508] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.444579] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.444676] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.444740] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.444825] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.444928] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.445154] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.445193] pci 0000:00:1f.3: reg 0x10: [mem 0x90614000-0x9061401f] [ 0.445267] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f] [ 0.445601] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.445610] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.445715] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.445724] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.445834] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.445845] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.445950] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.445960] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.445966] pci 0000:00:1c.3: bridge window [mem 0x90800000-0x909fffff] [ 0.445973] pci 0000:00:1c.3: bridge window [mem 0x90a00000-0x90bfffff 64bit pref] [ 0.446984] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.447103] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.447220] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.447336] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.447453] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.447571] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.447696] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.447820] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.450142] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.450164] ACPI: \_SB_.PCI0: notify handler is installed [ 0.450275] Found 1 acpi root devices [ 0.450341] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.450652] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.450663] vgaarb: loaded [ 0.450668] vgaarb: bridge control possible 0000:00:02.0 [ 0.450951] SCSI subsystem initialized [ 0.451150] libata version 3.00 loaded. [ 0.451365] ACPI: bus type USB registered [ 0.451499] usbcore: registered new interface driver usbfs [ 0.451568] usbcore: registered new interface driver hub [ 0.451653] usbcore: registered new device driver usb [ 0.451868] pps_core: LinuxPPS API ver. 1 registered [ 0.451874] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.451929] PTP clock support registered [ 0.452192] PCI: Using ACPI for IRQ routing [ 0.453689] PCI: pci_cache_line_size set to 64 bytes [ 0.453730] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.453734] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.453737] e820: reserve RAM buffer [mem 0x78add000-0x7bffffff] [ 0.453740] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.454079] NetLabel: Initializing [ 0.454086] NetLabel: domain hash size = 128 [ 0.454090] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.454116] NetLabel: unlabeled traffic allowed by default [ 0.454267] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.454277] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.456332] Switched to clocksource hpet [ 0.456440] pnp: PnP ACPI init [ 0.456459] ACPI: bus type PNP registered [ 0.456578] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.456724] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.456962] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.457091] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.457100] system 00:03: [io 0x0400-0x047f] has been reserved [ 0.457108] system 00:03: [io 0x0500-0x05fe] has been reserved [ 0.457115] system 00:03: [io 0x0600-0x061f] has been reserved [ 0.457123] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.457326] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.457511] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.457649] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.458136] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.458147] system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.458154] system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.458162] system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.458169] system 00:07: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.458176] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.458183] system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.458190] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.458198] system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.458206] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.460114] pnp 00:08: Plug and Play ACPI device, IDs INT33bd (active) [ 0.460159] pnp: PnP ACPI: found 9 devices [ 0.460165] ACPI: bus type PNP unregistered [ 0.472065] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.472073] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.472083] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.472088] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.472099] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.472104] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 [ 0.472123] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.472128] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.472133] pci 0000:00:1c.1: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.472137] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.472142] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.472146] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.472156] pci 0000:00:1c.0: BAR 8: can't assign mem (size 0x200000) [ 0.472169] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000) [ 0.472178] pci 0000:00:1c.1: BAR 8: can't assign mem (size 0x200000) [ 0.472187] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000) [ 0.472196] pci 0000:00:1c.2: BAR 8: can't assign mem (size 0x200000) [ 0.472205] pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x200000) [ 0.472215] pci 0000:00:1c.2: BAR 8: can't assign mem (size 0x200000) [ 0.472225] pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x200000) [ 0.472234] pci 0000:00:1c.1: BAR 8: can't assign mem (size 0x200000) [ 0.472243] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000) [ 0.472252] pci 0000:00:1c.0: BAR 8: can't assign mem (size 0x200000) [ 0.472261] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000) [ 0.472268] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.472276] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.472291] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.472298] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.472311] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.472318] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.472348] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.472356] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.472365] pci 0000:00:1c.3: bridge window [mem 0x90800000-0x909fffff] [ 0.472374] pci 0000:00:1c.3: bridge window [mem 0x90a00000-0x90bfffff 64bit pref] [ 0.472385] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 0.472390] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 0.472394] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 0.472398] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.472402] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 0.472406] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 0.472410] pci_bus 0000:00: resource 10 [mem 0x90800000-0x90bfffff] [ 0.472414] pci_bus 0000:00: resource 11 [mem 0x80000000-0x906ffffe] [ 0.472419] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.472423] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.472427] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.472431] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.472435] pci_bus 0000:04: resource 1 [mem 0x90800000-0x909fffff] [ 0.472440] pci_bus 0000:04: resource 2 [mem 0x90a00000-0x90bfffff 64bit pref] [ 0.472490] NET: Registered protocol family 2 [ 0.472704] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.472781] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.472861] TCP: Hash tables configured (established 16384 bind 16384) [ 0.472914] TCP: reno registered [ 0.472925] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.472948] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.473047] NET: Registered protocol family 1 [ 0.473173] RPC: Registered named UNIX socket transport module. [ 0.473179] RPC: Registered udp transport module. [ 0.473184] RPC: Registered tcp transport module. [ 0.473188] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.473206] pci 0000:00:02.0: Boot video device [ 0.473563] PCI: CLS 0 bytes, default 64 [ 1.110780] audit: initializing netlink socket (disabled) [ 1.110803] type=2000 audit(978409243.108:1): initialized [ 1.147862] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.153266] VFS: Disk quotas dquot_6.5.2 [ 1.153402] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.155621] NFS: Registering the id_resolver key type [ 1.155660] Key type id_resolver registered [ 1.155665] Key type id_legacy registered [ 1.155673] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.156086] fuse init (API version 7.22) [ 1.156891] bio: create slab at 1 [ 1.157313] Btrfs loaded [ 1.157388] msgmni has been set to 3747 [ 1.157934] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.157943] io scheduler noop registered [ 1.157948] io scheduler deadline registered [ 1.158044] io scheduler cfq registered (default) [ 1.158904] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.159120] efifb: probing for efifb [ 1.159995] efifb: framebuffer at 0x80000000, mapped to 0xffffc90004400000, using 8100k, total 8100k [ 1.160003] efifb: mode is 1920x1080x32, linelength=7680, pages=2025 [ 1.160008] efifb: scrolling: redraw [ 1.160013] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.174757] Console: switching to colour frame buffer device 240x67 [ 1.188313] fb0: EFI VGA frame buffer device [ 1.188588] ACPI: Fan [FAN0] (off) [ 1.190718] Monitor-Mwait will be used to enter C-1 state [ 1.190727] Monitor-Mwait will be used to enter C-2 state [ 1.190752] ACPI: acpi_idle registered with cpuidle [ 1.192220] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.192291] ACPI: Thermal Zone [TZ01] (27 C) [ 1.192536] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.212904] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.214159] Non-volatile memory driver v1.3 [ 1.214215] Linux agpgart interface v0.103 [ 1.218313] brd: module loaded [ 1.219011] Loading iSCSI transport class v2.0-870. [ 1.220105] iscsi: registered transport (tcp) [ 1.220506] Adaptec aacraid driver 1.2-0[30200]-ms [ 1.220660] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 1.221045] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k. [ 1.221285] iscsi: registered transport (qla4xxx) [ 1.221421] QLogic iSCSI HBA Driver [ 1.221606] DC390: clustering now enabled by default. If you get problems load [ 1.221689] with "disable_clustering=1" and report to maintainers [ 1.221896] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 1.222166] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 1.222291] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 1.222523] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1.222720] osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 1.223246] SCSI Media Changer driver v0.25 [ 1.223527] ahci 0000:00:13.0: version 3.0 [ 1.223715] ahci 0000:00:13.0: irq 103 for MSI/MSI-X [ 1.234358] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode [ 1.234458] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds [ 1.235254] scsi0 : ahci [ 1.235534] scsi1 : ahci [ 1.235739] ata1: SATA max UDMA/133 abar m2048@0x90617000 port 0x90617100 irq 103 [ 1.235826] ata2: DUMMY [ 1.239960] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013) [ 1.240097] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11) [ 1.240414] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.240485] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.240624] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.240705] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.243974] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.247154] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.250408] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 1.253604] igb: Copyright (c) 2007-2013 Intel Corporation. [ 1.256923] usbcore: registered new interface driver zd1201 [ 1.260184] usbcore: registered new interface driver catc [ 1.263430] usbcore: registered new interface driver kaweth [ 1.266579] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.269808] usbcore: registered new interface driver pegasus [ 1.273065] usbcore: registered new interface driver rtl8150 [ 1.276299] usbcore: registered new interface driver asix [ 1.279525] usbcore: registered new interface driver ax88179_178a [ 1.282702] usbcore: registered new interface driver cdc_ether [ 1.285837] usbcore: registered new interface driver r815x [ 1.288939] usbcore: registered new interface driver dm9601 [ 1.292041] usbcore: registered new interface driver gl620a [ 1.295117] usbcore: registered new interface driver net1080 [ 1.298175] usbcore: registered new interface driver plusb [ 1.301185] usbcore: registered new interface driver rndis_host [ 1.304175] usbcore: registered new interface driver cdc_subset [ 1.307096] usbcore: registered new interface driver zaurus [ 1.309978] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.312865] usbcore: registered new interface driver cdc_ncm [ 1.316005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.318797] ehci-pci: EHCI PCI platform driver [ 1.321706] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.324520] ohci-pci: OHCI PCI platform driver [ 1.327384] uhci_hcd: USB Universal Host Controller Interface driver [ 1.330488] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.333595] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.336795] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.336825] xhci_hcd 0000:00:14.0: irq 104 for MSI/MSI-X [ 1.336924] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.339729] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.342532] usb usb1: Product: xHCI Host Controller [ 1.345339] usb usb1: Manufacturer: Linux 3.13.0_drm-intel-next-queued_4c0e55_20140219+ xhci_hcd [ 1.348214] usb usb1: SerialNumber: 0000:00:14.0 [ 1.351430] hub 1-0:1.0: USB hub found [ 1.354296] hub 1-0:1.0: 6 ports detected [ 1.357761] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.360781] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.363654] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.366474] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.369274] usb usb2: Product: xHCI Host Controller [ 1.372039] usb usb2: Manufacturer: Linux 3.13.0_drm-intel-next-queued_4c0e55_20140219+ xhci_hcd [ 1.374859] usb usb2: SerialNumber: 0000:00:14.0 [ 1.377947] hub 2-0:1.0: USB hub found [ 1.380740] hub 2-0:1.0: 1 port detected [ 1.387518] usbcore: registered new interface driver usb-storage [ 1.390458] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.447484] i8042: No controller found [ 1.450507] mousedev: PS/2 mouse device common for all mice [ 1.453531] rtc_cmos 00:00: RTC can wake from S4 [ 1.456519] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.459305] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.462174] i2c /dev entries driver [ 1.465136] hidraw: raw HID events driver (C) Jiri Kosina [ 1.469255] usbcore: registered new interface driver usbhid [ 1.472031] usbhid: USB HID core driver [ 1.474932] TCP: cubic registered [ 1.477589] Initializing XFRM netlink socket [ 1.480218] NET: Registered protocol family 17 [ 1.482866] Key type dns_resolver registered [ 1.486261] registered taskstats version 1 [ 1.489184] Magic number: 1:808:311 [ 1.491866] PM: Hibernation image not present or could not be loaded. [ 1.491909] Warning: unable to open an initial console. [ 1.549494] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.554397] ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133 [ 1.557734] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.564416] ata1.00: configured for UDMA/133 [ 1.567572] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5 [ 1.571117] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.571264] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.576573] sd 0:0:0:0: [sda] Write Protect is off [ 1.579285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.579322] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.583529] sda: sda1 sda2 sda3 sda4 sda5 [ 1.587356] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.601765] Freeing unused kernel memory: 22684K (ffffffff81b49000 - ffffffff83170000) [ 1.677234] dracut: dracut-018-35.git20120510.fc17 [ 1.713379] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.748330] usb 1-1: New USB device found, idVendor=0b95, idProduct=7720 [ 1.751426] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.754533] usb 1-1: Product: AX88772 [ 1.756729] udevd[1124]: starting version 182 [ 1.760744] usb 1-1: SerialNumber: 00D13B [ 1.786324] [drm] Initialized drm 1.1.0 20060810 [ 1.799012] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.804745] ACPI: Lid Switch [LID0] [ 1.809025] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.812448] ACPI: Power Button [PWRB] [ 1.815896] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.819614] ACPI: Sleep Button [SLPB] [ 1.823369] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.827087] ACPI: Power Button [PWRF] [ 1.836279] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0f31 flags=is_mobile,need_gfx_hws,is_valleyview,has_hotplug, [ 1.836279] [drm:intel_detect_pch], No PCH found? [ 1.836574] [drm] Memory usable by graphics device = 2048M [ 1.836576] [drm:i915_gem_gtt_init], GMADR size = 256M [ 1.836578] [drm:i915_gem_gtt_init], GTT stolen size = 64M [ 1.836581] checking generic (80000000 7e9000) vs hw (80000000 10000000) [ 1.836582] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver [ 1.851924] Console: switching to colour dummy device 80x25 [ 1.888355] [drm:intel_opregion_setup], graphic opregion physical addr: 0x794d7018 [ 1.888375] [drm:intel_opregion_setup], Public ACPI methods supported [ 1.888379] [drm:intel_opregion_setup], ASLE supported [ 1.888433] i915 0000:00:02.0: irq 105 for MSI/MSI-X [ 1.888446] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.888455] [drm] Driver supports precise vblank timestamp query. [ 1.888462] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz [ 1.888466] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT VALLEYVIEW [ 1.888470] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.888474] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 1.888479] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.888484] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.888488] [drm:parse_lfp_panel_data], VBT initial LVDS value 0 [ 1.888492] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.888495] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.888499] [drm:parse_mipi], No MIPI BDB found [ 1.888507] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 1.888518] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at 7b000000 [ 1.888562] [drm:intel_modeset_init], 2 display pipes available. [ 1.888601] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.889122] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 1.889284] [drm:intel_dp_init_connector], Adding DP connector on port B [ 1.889460] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 1.891884] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064 [ 1.891892] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.894312] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064 [ 1.894320] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.894788] [drm:intel_dp_init_connector], Adding eDP connector on port C [ 1.894940] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 1.894945] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.894949] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.894952] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 1.894955] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 1.894959] [drm:edp_panel_vdd_on], Turning eDP VDD on [ 1.894966] [drm:edp_panel_vdd_on], PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d [ 1.895110] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 1.895249] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 1.895795] [drm:intel_dp_get_dpcd], DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 1.895956] [drm:intel_dp_get_dpcd], Detected EDP PSR Panel. [ 1.895964] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 1.896664] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.916417] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.916431] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 1.916522] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 7812/7812, sysfs interface registered [ 1.916529] [drm:intel_dsi_init], [ 1.916534] [drm:intel_dsi_init], no device found [ 1.918344] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 1.918348] [drm:intel_modeset_readout_hw_state], [CRTC:6] hw state readout: disabled [ 1.918354] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe A [ 1.918358] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe A [ 1.918362] [drm:intel_modeset_readout_hw_state], [ENCODER:15:TMDS-15] hw state readout: disabled, pipe A [ 1.918367] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A [ 1.918373] [drm:intel_dp_get_config], pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 1.918377] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: enabled, pipe A [ 1.918382] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:eDP-1] hw state readout: enabled [ 1.918386] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled [ 1.918390] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:HDMI-A-1] hw state readout: disabled [ 1.918394] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:DP-1] hw state readout: disabled [ 1.918398] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: disabled [ 1.918404] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 1.918407] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.918410] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.918414] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.918418] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.918421] [drm:intel_dump_pipe_config], requested mode: [ 1.918426] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 1.918429] [drm:intel_dump_pipe_config], adjusted mode: [ 1.918433] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.918438] [drm:intel_dump_crtc_timings], crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 1.918441] [drm:intel_dump_pipe_config], port clock: 270000 [ 1.918444] [drm:intel_dump_pipe_config], pipe src size: 1920x1080 [ 1.918447] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.918451] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.918454] [drm:intel_dump_pipe_config], ips: 0 [ 1.918456] [drm:intel_dump_pipe_config], double wide: 0 [ 1.918460] [drm:intel_dump_pipe_config], [CRTC:6][setup_hw_state] config for pipe B [ 1.918463] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.918466] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.918470] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.918474] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.918476] [drm:intel_dump_pipe_config], requested mode: [ 1.918481] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.918484] [drm:intel_dump_pipe_config], adjusted mode: [ 1.918488] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.918492] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.918495] [drm:intel_dump_pipe_config], port clock: 0 [ 1.918498] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 1.918501] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.918505] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.918508] [drm:intel_dump_pipe_config], ips: 0 [ 1.918510] [drm:intel_dump_pipe_config], double wide: 0 [ 1.918515] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 1.918521] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 1.918525] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 1.918528] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 1.918532] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 1.918536] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 1.918539] [drm:check_crtc_state], [CRTC:3] [ 1.920357] [drm:check_crtc_state], [CRTC:6] [ 1.920365] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000] [ 1.922634] [drm:i915_gem_context_init], HW context support initialized [ 1.922650] [drm:init_status_page], render ring hws offset: 0x00004000 [ 1.922654] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.922658] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072 [ 1.924369] [drm:init_pipe_control], render ring pipe control offset: 0x00027000 [ 1.924382] [drm:init_status_page], bsd ring hws offset: 0x00028000 [ 1.924386] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.924390] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072 [ 1.924434] [drm:init_status_page], blitter ring hws offset: 0x0004b000 [ 1.924438] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.924442] [drm:i915_pages_create_for_stolen], offset=0x40000, size=131072 [ 1.926352] [drm:valleyview_init_clock_gating], DDR speed: 1333 MHz [ 1.926378] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] [ 1.926382] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 1.926562] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 1.926730] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 1.926741] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 1.926747] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes : [ 1.926753] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.926757] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 1.926761] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 1.926764] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 1.932347] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 1.932350] [drm:intel_crt_detect], CRT not detected via hotplug [ 1.932510] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 1.932514] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.932517] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 1.932520] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 1.934624] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.934628] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 1.934631] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 1.934634] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 1.934638] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 1.934642] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 1.934797] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.934800] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 1.934804] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 1.934808] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 1.934811] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 1.934815] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 1.934819] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 1.934822] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 1.934971] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.934975] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.934979] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 1.934982] [drm:drm_setup_crtcs], [ 1.934986] [drm:drm_enable_connectors], connector 20 enabled? yes [ 1.934989] [drm:drm_enable_connectors], connector 9 enabled? no [ 1.934992] [drm:drm_enable_connectors], connector 12 enabled? no [ 1.934995] [drm:drm_enable_connectors], connector 16 enabled? no [ 1.934998] [drm:drm_enable_connectors], connector 18 enabled? no [ 1.935002] [drm:intel_fb_initial_config], looking for cmdline mode on connector 20 [ 1.935005] [drm:intel_fb_initial_config], looking for preferred mode on connector 20 [ 1.935009] [drm:intel_fb_initial_config], connector eDP-1 on crtc 3: 1920x1080 [ 1.935011] [drm:intel_fb_initial_config], connector 9 not enabled, skipping [ 1.935014] [drm:intel_fb_initial_config], connector 12 not enabled, skipping [ 1.935017] [drm:intel_fb_initial_config], connector 16 not enabled, skipping [ 1.935020] [drm:intel_fb_initial_config], connector 18 not enabled, skipping [ 1.935024] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3 [ 1.935028] [drm:intelfb_create], no BIOS fb, allocating a new one [ 1.935031] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000 [ 1.935039] [drm:i915_pages_create_for_stolen], offset=0x60000, size=8294400 [ 1.939911] [drm:intelfb_create], allocated 1920x1080 fb: 0x0006d000, bo ffff880002940000 [ 1.940116] fbcon: inteldrmfb (fb0) is primary device [ 1.940234] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 1.940238] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 1.940239] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 1.940242] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.940246] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.940248] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 [ 1.940251] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 1.940254] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.940257] [drm:connected_sink_compute_bpp], [CONNECTOR:20:eDP-1] checking for sink bpp constrains [ 1.940262] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 1.940272] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.940274] [drm:intel_dp_compute_config], DP link bw required 333072 available 432000 [ 1.940277] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.940279] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 1.940280] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.940282] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.940284] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.940287] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.940288] [drm:intel_dump_pipe_config], requested mode: [ 1.940292] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.940293] [drm:intel_dump_pipe_config], adjusted mode: [ 1.940296] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.940299] [drm:intel_dump_crtc_timings], crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 1.940301] [drm:intel_dump_pipe_config], port clock: 270000 [ 1.940302] [drm:intel_dump_pipe_config], pipe src size: 1920x1080 [ 1.940304] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.940306] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.940307] [drm:intel_dump_pipe_config], ips: 0 [ 1.940309] [drm:intel_dump_pipe_config], double wide: 0 [ 1.947354] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 1.947357] [drm:intel_edp_backlight_off], [ 1.947522] [drm:intel_edp_panel_off], Turn eDP power off [ 2.068710] asix 1-1:1.0 eth0: register 'asix' at usb-0000:00:14.0-1, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:61:c8 [ 2.109357] tsc: Refined TSC clocksource calibration: 2133.333 MHz [ 2.148498] [drm:wait_panel_off], Wait for panel power off time [ 2.148503] [drm:wait_panel_status], mask b0000000 value 00000000 status c0000008 control abcd0008 [ 2.181787] [drm:wait_panel_status], Wait complete [ 2.215491] [drm:intel_dp_link_down], [ 2.221589] usb 1-2: new low-speed USB device number 3 using xhci_hcd [ 2.237964] usb 1-2: New USB device found, idVendor=0461, idProduct=0010 [ 2.237967] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.237970] usb 1-2: Product: USB Keyboard [ 2.237972] usb 1-2: Manufacturer: NOVATEK [ 2.238265] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.238271] usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.241298] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input4 [ 2.241551] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-2/input0 [ 2.246445] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/input/input5 [ 2.246644] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-2/input1 [ 2.267483] [drm:g4x_wait_for_vblank], vblank wait timed out [ 2.318503] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 2.360502] [drm:i9xx_update_plane], Writing base 0006D000 00000000 0 0 7680 [ 2.360513] [drm:intel_edp_psr_match_conditions], PSR not supported on this platform [ 2.360517] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080] [ 2.378497] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 [ 2.378500] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 2.378502] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.378503] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 2.378508] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 2.392494] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.399448] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 2.406493] [drm:intel_dp_set_signal_levels], Using signal levels 00000000 [ 2.407018] [drm:intel_dp_start_link_train], clock recovery OK [ 2.407019] [drm:intel_edp_panel_on], Turn eDP power on [ 2.407021] [drm:wait_panel_power_cycle], Wait for panel power cycle [ 2.410747] usb 1-6: New USB device found, idVendor=0424, idProduct=2640 [ 2.410750] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.411349] hub 1-6:1.0: USB hub found [ 2.411378] hub 1-6:1.0: 3 ports detected [ 2.684866] usb 1-6.1: new high-speed USB device number 5 using xhci_hcd [ 2.705054] usb 1-6.1: New USB device found, idVendor=0424, idProduct=4040 [ 2.705066] usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.705076] usb 1-6.1: Product: Ultra Fast Media Reader [ 2.705084] usb 1-6.1: Manufacturer: Generic [ 2.705092] usb 1-6.1: SerialNumber: 000000264001 [ 2.706135] usb-storage 1-6.1:1.0: USB Mass Storage device detected [ 2.706228] scsi2 : usb-storage 1-6.1:1.0 [ 2.749354] [drm:wait_panel_status], mask b800000f value 00000000 status 08000001 control abcd0008 [ 2.780233] usb 1-6.2: new low-speed USB device number 6 using xhci_hcd [ 2.798572] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 2.798585] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.798594] usb 1-6.2: Product: USB Optical Mouse [ 2.798602] usb 1-6.2: Manufacturer: Logitech [ 2.799595] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.801811] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input6 [ 2.802166] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 2.815350] [drm:wait_panel_status], Wait complete [ 2.815355] [drm:wait_panel_on], Wait for panel power on [ 2.815358] [drm:wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b [ 2.969482] [drm:wait_panel_status], Wait complete [ 2.969485] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off [ 2.969489] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 2.970263] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful [ 2.970465] [drm:g4x_check_srwm], SR watermark: display plane 107, cursor 6 [ 2.970467] [drm:g4x_check_srwm], SR watermark: display plane 211, cursor 10 [ 2.970470] [drm:valleyview_update_wm], Setting FIFO watermarks - A: plane=61, cursor=6, B: plane=2, cursor=2, SR: plane=107, cursor=10 [ 3.004349] [drm:intel_edp_backlight_on], [ 3.004353] [drm:intel_panel_enable_backlight], pipe A [ 3.004356] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7812 [ 3.004363] [drm:intel_connector_check_state], [CONNECTOR:20:eDP-1] [ 3.004369] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 3.004371] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 3.004373] [drm:check_encoder_state], [ENCODER:15:TMDS-15] [ 3.004375] [drm:check_encoder_state], [ENCODER:17:TMDS-17] [ 3.004377] [drm:check_encoder_state], [ENCODER:19:TMDS-19] [ 3.004380] [drm:check_crtc_state], [CRTC:3] [ 3.006501] [drm:check_crtc_state], [CRTC:6] [ 3.006506] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 3.006510] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 3.006513] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.006522] Console: switching to colour frame buffer device 240x67 [ 3.006536] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 3.006539] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.006541] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.023931] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.024002] i915 0000:00:02.0: registered panic notifier [ 3.030370] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.031238] acpi device:21: registered as cooling_device3 [ 3.031510] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 3.031824] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.040576] dracut: Starting plymouth daemon [ 3.058661] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 3.058667] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.058671] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.079142] [drm:i915_gem_open], [ 3.079189] [drm:intel_crtc_cursor_set], cursor off [ 3.079196] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 3.079202] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.079208] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.079212] [drm:intel_crtc_cursor_set], cursor off [ 3.079215] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 3.079219] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 3.079223] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.079245] [drm:i915_gem_open], [ 3.079269] [drm:intel_crtc_cursor_set], cursor off [ 3.079274] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 3.079278] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.079282] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.079286] [drm:intel_crtc_cursor_set], cursor off [ 3.079289] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 3.079293] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 3.079296] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.079314] [drm:i915_gem_open], [ 3.083874] [drm:intel_crtc_cursor_set], cursor off [ 3.083881] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 3.083886] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.083890] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.083894] [drm:intel_crtc_cursor_set], cursor off [ 3.083897] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 3.083901] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 3.083904] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.084402] dracut: error: unexpectedly disconnected from boot status daemon [ 3.098954] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 3.098960] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.098964] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.114205] Switched to clocksource tsc [ 3.270588] ACPI: AC Adapter [ADP1] (on-line) [ 3.277005] ACPI: Battery Slot [BAT0] (battery present) [ 3.287327] ACPI: Battery Slot [BAT1] (battery absent) [ 3.345170] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 3.356002] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 3.356008] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.356012] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 3.364143] snd_hda_intel 0000:00:1b.0: irq 106 for MSI/MSI-X [ 3.368127] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 3.394643] ALSA sound/pci/hda/patch_realtek.c:419 SKU: Nid=0x1d sku_cfg=0x4014c601 [ 3.394649] ALSA sound/pci/hda/patch_realtek.c:421 SKU: port_connectivity=0x1 [ 3.394652] ALSA sound/pci/hda/patch_realtek.c:422 SKU: enable_pcbeep=0x1 [ 3.394655] ALSA sound/pci/hda/patch_realtek.c:423 SKU: check_sum=0x00000004 [ 3.394658] ALSA sound/pci/hda/patch_realtek.c:424 SKU: customization=0x000000c6 [ 3.394661] ALSA sound/pci/hda/patch_realtek.c:425 SKU: external_amp=0x0 [ 3.394664] ALSA sound/pci/hda/patch_realtek.c:426 SKU: platform_type=0x0 [ 3.394667] ALSA sound/pci/hda/patch_realtek.c:427 SKU: swap=0x0 [ 3.394670] ALSA sound/pci/hda/patch_realtek.c:428 SKU: override=0x1 [ 3.395808] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 3.395813] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.395817] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.395819] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 3.395822] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 3.395826] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x19 [ 3.395830] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18 [ 3.395833] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a [ 3.395837] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x4014c601 for NID 0x1d [ 3.395841] ALSA sound/pci/hda/patch_realtek.c:507 realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0262 [ 3.423735] dracut: Checking ext4: /dev/sda4 [ 3.428240] dracut: issuing e2fsck -a /dev/sda4 [ 3.441855] dracut: /dev/sda4: clean, 415687/3276800 files, 8384872/13107200 blocks [ 3.448154] dracut: Remounting /dev/sda4 with -o ro [ 3.463026] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 3.473868] dracut: Mounted root filesystem /dev/sda4 [ 3.501019] device-mapper: uevent: version 1.0.3 [ 3.505327] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 3.548049] dracut: Switching root [ 3.604631] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 3.627049] systemd[1]: Failed to insert module 'ipv6' [ 3.631494] systemd[1]: Set hostname to . [ 3.637089] random: systemd urandom read with 106 bits of entropy available [ 3.663460] LVM: Logical Volume autoactivation enabled. [ 3.667563] LVM: Activation generator successfully completed. [ 3.705350] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000 [ 3.705360] [drm:i915_pages_create_for_stolen], offset=0x3efa000, size=24576 [ 3.705373] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 3.710228] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 2.01 PQ: 0 ANSI: 0 [ 3.714342] [drm:valleyview_enable_rps], GPLL enabled? yes [ 3.714347] [drm:valleyview_enable_rps], GPU status: 0x0000c590 [ 3.714350] [drm:valleyview_enable_rps], current GPU freq: 292 MHz (197) [ 3.715327] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.716345] [drm:valleyview_enable_rps], max GPU freq: 708 MHz (217) [ 3.718336] [drm:valleyview_enable_rps], RPe GPU freq: 375 MHz (201) [ 3.720352] [drm:valleyview_enable_rps], min GPU freq: 167 MHz (191) [ 3.720358] [drm:valleyview_enable_rps], setting GPU freq to 375 MHz (201) [ 3.720362] [drm:valleyview_set_rps], GPU freq request from 292 MHz (197) to 375 MHz (201) [ 3.720613] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 3.743474] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 3.747729] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.751868] systemd[1]: Starting Syslog Socket. [ 3.760254] systemd[1]: Listening on Syslog Socket. [ 3.764340] systemd[1]: Starting Replay Read-Ahead Data... [ 3.773083] systemd[1]: Starting Collect Read-Ahead Data... [ 3.777000] random: nonblocking pool is initialized [ 3.782218] systemd-readahead[2194]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 3.789904] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 3.791575] systemd-readahead[2195]: Failed to create fanotify object: Function not implemented [ 3.802818] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.806963] systemd[1]: Starting Delayed Shutdown Socket. [ 3.815487] systemd[1]: Listening on Delayed Shutdown Socket. [ 3.819776] systemd[1]: Starting udev Kernel Socket. [ 3.828515] systemd[1]: Listening on udev Kernel Socket. [ 3.832745] systemd[1]: Starting udev Control Socket. [ 3.841495] systemd[1]: Listening on udev Control Socket. [ 3.845639] systemd[1]: Starting Encrypted Volumes. [ 3.854234] systemd[1]: Reached target Encrypted Volumes. [ 3.858365] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 3.867009] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.871114] systemd[1]: Starting Journal Socket. [ 3.879541] systemd[1]: Listening on Journal Socket. [ 3.883756] systemd[1]: Starting Create static device nodes in /dev... [ 3.892954] systemd[1]: Mounting POSIX Message Queue File System... [ 3.902370] systemd[1]: Starting udev Coldplug all Devices... [ 3.911745] systemd[1]: Mounting Debug File System... [ 3.921058] systemd[1]: Starting Journal Service... [ 3.939276] systemd[1]: Started Journal Service. [ 3.948512] systemd[1]: Mounting Huge Pages File System... [ 3.957931] systemd[1]: Starting LVM2 metadata daemon socket. [ 3.967023] systemd[1]: Listening on LVM2 metadata daemon socket. [ 3.971073] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 3.979463] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3.983514] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3.993165] systemd[1]: Expecting device dev-disk-by\x2duuid-1a1b79a3\x2d6d33\x2d48d2\x2da27e\x2d1b5805d88291.device... [ 4.001523] systemd[1]: Mounting Temporary Directory... [ 4.014034] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 4.018839] systemd[1]: Expecting device dev-disk-by\x2duuid-ABCD\x2d535B.device... [ 4.029042] systemd[1]: Expecting device dev-disk-by\x2duuid-0a7e090c\x2dd2b9\x2d498e\x2dbc0d\x2d05c33717cb8c.device... [ 4.037795] systemd[1]: Expecting device dev-disk-by\x2duuid-d79f918f\x2d693d\x2d4480\x2d91cf\x2d6840792221db.device... [ 4.052646] systemd[1]: Started Replay Read-Ahead Data. [ 4.057208] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE [ 4.066760] systemd[1]: Started Collect Read-Ahead Data. [ 4.076641] systemd[1]: Started Create static device nodes in /dev. [ 4.086893] systemd[1]: Mounted POSIX Message Queue File System. [ 4.098610] systemd[1]: Mounted Debug File System. [ 4.109275] systemd[1]: Mounted Huge Pages File System. [ 4.119594] systemd[1]: Mounted Temporary Directory. [ 4.124112] systemd[1]: Starting udev Kernel Device Manager... [ 4.134116] systemd[1]: Starting Load legacy module configuration... [ 4.140897] systemd-udevd[2903]: starting version 204 [ 4.153875] systemd[1]: Started File System Check on Root Device. [ 4.158266] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.171123] systemd[1]: Started Load Kernel Modules. [ 4.176952] systemd[1]: Mounting FUSE Control File System... [ 4.183506] EXT4-fs (sda4): re-mounted. Opts: (null) [ 4.192376] systemd[1]: Mounted Configuration File System. [ 4.200545] systemd[1]: Started Set Up Additional Binary Formats. [ 4.205909] systemd[1]: Starting Setup Virtual Console... [ 4.218076] systemd[1]: Starting Apply Kernel Variables... [ 4.234527] systemd[1]: Started udev Kernel Device Manager. [ 4.245912] systemd[1]: Mounted FUSE Control File System. [ 4.250886] systemd[1]: Starting LVM2 metadata daemon... [ 4.266650] systemd[1]: Started udev Coldplug all Devices. [ 4.276416] systemd[1]: Started Load legacy module configuration. [ 4.286810] systemd[1]: Started Remount Root and Kernel File Systems. [ 4.298555] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.298560] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.298564] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.313275] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 4.322239] systemd[1]: Started Apply Kernel Variables. [ 4.332128] systemd[1]: Started LVM2 metadata daemon. [ 4.337688] systemd[1]: Starting Local File Systems (Pre). [ 4.348446] systemd[1]: Reached target Local File Systems (Pre). [ 4.352782] systemd[1]: Starting Configure read-only root support... [ 4.364178] systemd[1]: Started Import network configuration from initramfs. [ 4.373954] systemd[1]: Started Setup Virtual Console. [ 4.378380] systemd[1]: Starting Show Plymouth Boot Screen... [ 4.398221] systemd[1]: Started Configure read-only root support. [ 4.407082] systemd[1]: Starting Load Random Seed... [ 4.459291] [drm:i915_gem_open], [ 4.459367] [drm:intel_crtc_cursor_set], cursor off [ 4.459375] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.459382] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.459387] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.459392] [drm:intel_crtc_cursor_set], cursor off [ 4.459395] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 4.459399] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 4.459403] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.459426] [drm:i915_gem_open], [ 4.459451] [drm:intel_crtc_cursor_set], cursor off [ 4.459456] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 4.459460] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 4.459464] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.459468] [drm:intel_crtc_cursor_set], cursor off [ 4.459471] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 4.459475] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 4.459479] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 4.459496] [drm:i915_gem_open], [ 4.459590] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 4.459596] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5] [ 4.459608] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 4.459613] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] [ 4.459617] [drm:intel_dp_detect], [CONNECTOR:20:eDP-1] [ 4.459623] [drm:edp_panel_vdd_on], Turning eDP VDD on [ 4.459629] [drm:edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 4.460730] [drm:intel_dp_probe_oui], Sink OUI: 001cf8 [ 4.460903] [drm:intel_dp_probe_oui], Branch OUI: 000000 [ 4.460922] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 4.461008] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:eDP-1] probed modes : [ 4.461015] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 4.461027] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 4.477471] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 4.477481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 4.477485] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 4.477490] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 4.483355] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 4.483361] [drm:intel_crt_detect], CRT not detected via hotplug [ 4.483518] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4.483522] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4.483526] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4.483529] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4.485663] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4.485671] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4.485674] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4.485680] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 4.485702] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 4.485706] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 4.485710] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 4.485714] [drm:valleyview_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 4.491404] [drm:valleyview_crt_detect_hotplug], valleyview hotplug adpa=0xf40000, result 0 [ 4.491410] [drm:intel_crt_detect], CRT not detected via hotplug [ 4.491575] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4.491580] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4.491583] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4.491586] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4.493733] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4.493742] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4.493745] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4.493751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 4.493780] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 4.493786] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 4.493790] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 4.493950] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 4.493955] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 4.493959] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 4.493967] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 4.493971] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 4.493975] [drm:intel_hdmi_detect], [CONNECTOR:12:HDMI-A-1] [ 4.494131] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 4.494136] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 4.494140] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 4.494151] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 4.494155] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 4.494159] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 4.494164] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 4.494168] [drm:drm_mode_getconnector], [CONNECTOR:16:?] [ 4.494172] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] [ 4.494175] [drm:intel_dp_detect], [CONNECTOR:16:DP-1] [ 4.494179] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-1] disconnected [ 4.494184] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 4.494188] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 4.494191] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 4.494647] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 4.494653] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 4.494658] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 4.494667] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 4.494672] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 4.494675] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-2] [ 4.494829] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 4.494833] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 4.494838] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 4.494869] [drm:drm_mode_addfb], [FB:27] [ 4.627472] systemd-udevd[2957]: renamed network interface eth0 to enp0s20u1 [ 4.651686] Adding 3964924k swap on /dev/sda3. Priority:-1 extents:1 across:3964924k SS [ 4.718790] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.743622] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.763789] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 4.788889] type=1305 audit(978409246.786:2): audit_pid=3041 old=0 auid=4294967295 ses=4294967295 res=1 [ 4.837384] traps: alsactl[3059] general protection ip:372f048c39 sp:7fff96b0fcb0 error:0 in libc-2.17.so[372f000000+1b5000] [ 4.897440] [drm:edp_panel_vdd_off_sync], Turning eDP VDD off [ 4.897445] [drm:edp_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 5.971941] asix 1-1:1.0 enp0s20u1: link down [ 7.765073] asix 1-1:1.0 enp0s20u1: link up, 100Mbps, full-duplex, lpa 0x43E1 [ 9.138743] [drm:intel_crtc_cursor_set], cursor off [ 9.138752] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 9.138760] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 9.138765] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 9.138770] [drm:intel_crtc_cursor_set], cursor off [ 9.138774] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 9.138778] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 9.138782] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 62.804109] usb 1-6.2: USB disconnect, device number 6 [ 64.260864] usb 1-6.2: new low-speed USB device number 7 using xhci_hcd [ 64.275884] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 64.275967] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 64.276051] usb 1-6.2: Product: USB Optical Mouse [ 64.276107] usb 1-6.2: Manufacturer: Logitech [ 64.276475] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 64.279412] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input9 [ 64.279938] hid-generic 0003:046D:C05A.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 124.500137] usb 1-6.2: USB disconnect, device number 7 [ 125.956865] usb 1-6.2: new low-speed USB device number 8 using xhci_hcd [ 125.974435] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 125.974576] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 125.974660] usb 1-6.2: Product: USB Optical Mouse [ 125.974716] usb 1-6.2: Manufacturer: Logitech [ 125.975089] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 125.978159] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input10 [ 125.978817] hid-generic 0003:046D:C05A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 186.196123] usb 1-6.2: USB disconnect, device number 8 [ 187.652865] usb 1-6.2: new low-speed USB device number 9 using xhci_hcd [ 187.670451] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 187.670792] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 187.671128] usb 1-6.2: Product: USB Optical Mouse [ 187.671421] usb 1-6.2: Manufacturer: Logitech [ 187.673209] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 187.677824] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input11 [ 187.680052] hid-generic 0003:046D:C05A.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 247.892137] usb 1-6.2: USB disconnect, device number 9 [ 249.348838] usb 1-6.2: new low-speed USB device number 10 using xhci_hcd [ 249.366363] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 249.366486] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 249.366570] usb 1-6.2: Product: USB Optical Mouse [ 249.366626] usb 1-6.2: Manufacturer: Logitech [ 249.367241] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 249.370160] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input12 [ 249.370895] hid-generic 0003:046D:C05A.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 309.588117] usb 1-6.2: USB disconnect, device number 10 [ 311.044833] usb 1-6.2: new low-speed USB device number 11 using xhci_hcd [ 311.062276] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 311.062449] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 311.062535] usb 1-6.2: Product: USB Optical Mouse [ 311.062590] usb 1-6.2: Manufacturer: Logitech [ 311.063747] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 311.066346] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input13 [ 311.066865] hid-generic 0003:046D:C05A.0008: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 371.284149] usb 1-6.2: USB disconnect, device number 11 [ 372.740840] usb 1-6.2: new low-speed USB device number 12 using xhci_hcd [ 372.758439] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 372.758779] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 372.759115] usb 1-6.2: Product: USB Optical Mouse [ 372.759406] usb 1-6.2: Manufacturer: Logitech [ 372.763524] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 372.767762] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input14 [ 372.769563] hid-generic 0003:046D:C05A.0009: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 432.980109] usb 1-6.2: USB disconnect, device number 12 [ 434.436824] usb 1-6.2: new low-speed USB device number 13 using xhci_hcd [ 434.454489] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 434.454639] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 434.454723] usb 1-6.2: Product: USB Optical Mouse [ 434.454778] usb 1-6.2: Manufacturer: Logitech [ 434.456419] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 434.463629] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input15 [ 434.464080] hid-generic 0003:046D:C05A.000A: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 494.676139] usb 1-6.2: USB disconnect, device number 13 [ 496.132812] usb 1-6.2: new low-speed USB device number 14 using xhci_hcd [ 496.155469] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 496.160262] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 496.164986] usb 1-6.2: Product: USB Optical Mouse [ 496.169642] usb 1-6.2: Manufacturer: Logitech [ 496.174479] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 496.181589] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input16 [ 496.186859] hid-generic 0003:046D:C05A.000B: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 556.372139] usb 1-6.2: USB disconnect, device number 14 [ 557.828814] usb 1-6.2: new low-speed USB device number 15 using xhci_hcd [ 557.851363] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 557.856202] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 557.860886] usb 1-6.2: Product: USB Optical Mouse [ 557.865548] usb 1-6.2: Manufacturer: Logitech [ 557.871435] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 557.879571] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input17 [ 557.884868] hid-generic 0003:046D:C05A.000C: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 569.795927] [drm:i915_gem_open], [ 569.795978] [drm:intel_crtc_cursor_set], cursor off [ 569.795984] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 569.795992] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 569.795997] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 569.796002] [drm:intel_crtc_cursor_set], cursor off [ 569.796005] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 569.796009] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 569.796013] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 569.796034] [drm:i915_gem_open], [ 569.796154] [drm:valleyview_set_rps], GPU freq request from 375 MHz (201) to 708 MHz (217) [ 569.797406] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 375 MHz (201) [ 569.913930] [drm:valleyview_set_rps], GPU freq request from 375 MHz (201) to 708 MHz (217) [ 570.041279] [drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit [ 570.657450] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 570.666038] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 571.060727] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 571.073515] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 571.160066] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 571.286528] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 571.291736] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 601.057290] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=7812/7812 [ 601.057293] [drm:intel_panel_actually_set_backlight], set backlight PWM = 7812 [ 606.115703] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 606.317025] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 606.441218] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 606.518915] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 606.654925] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 606.768659] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 606.881832] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 606.894533] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 607.001083] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 607.100679] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 607.106689] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 607.118667] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 607.181879] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 607.319819] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 618.067643] usb 1-6.2: USB disconnect, device number 15 [ 619.524281] usb 1-6.2: new low-speed USB device number 16 using xhci_hcd [ 619.544259] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 619.548973] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 619.553670] usb 1-6.2: Product: USB Optical Mouse [ 619.558345] usb 1-6.2: Manufacturer: Logitech [ 619.595318] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 619.686292] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input18 [ 619.733914] hid-generic 0003:046D:C05A.000D: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 641.707573] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 641.877101] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 642.084277] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 642.219254] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 642.506038] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 642.665757] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 642.777844] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 642.876166] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 642.892854] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 642.941660] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 642.953833] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 643.080326] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 643.103386] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 643.135266] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 643.157509] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 643.273160] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 677.229780] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 677.497966] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 677.799875] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 678.137917] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 678.418847] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 678.528411] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 678.725940] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 678.794768] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 678.808046] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 678.821121] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 678.830361] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 678.841975] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 678.886728] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 678.933530] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 679.228017] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 679.763638] usb 1-6.2: USB disconnect, device number 16 [ 681.220272] usb 1-6.2: new low-speed USB device number 17 using xhci_hcd [ 681.240234] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 681.244950] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 681.249649] usb 1-6.2: Product: USB Optical Mouse [ 681.254326] usb 1-6.2: Manufacturer: Logitech [ 681.289268] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 681.365278] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input19 [ 681.421279] hid-generic 0003:046D:C05A.000E: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 712.955680] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 713.098198] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 713.408755] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 713.705147] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 713.882954] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 714.138427] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 714.253118] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 714.422716] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 714.555127] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 714.687647] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 714.788429] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 714.803920] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 714.847729] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 714.868752] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 714.919947] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 715.210404] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 741.459641] usb 1-6.2: USB disconnect, device number 17 [ 742.916266] usb 1-6.2: new low-speed USB device number 18 using xhci_hcd [ 742.936270] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 742.940994] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 742.945696] usb 1-6.2: Product: USB Optical Mouse [ 742.950376] usb 1-6.2: Manufacturer: Logitech [ 742.981259] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 743.074268] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input20 [ 743.119269] hid-generic 0003:046D:C05A.000F: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 748.574641] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 748.829490] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 748.965420] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 749.069557] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 749.249750] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 749.631244] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 749.910167] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 750.079629] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 750.195331] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 750.312552] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 750.441962] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 750.530253] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 750.542112] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 750.703730] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 750.835973] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 751.013075] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 784.264023] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 784.487400] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 784.724850] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 785.010728] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 785.343316] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 785.618250] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 785.747904] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 785.887976] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 785.996955] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 786.098725] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 786.250465] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 786.369109] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 786.495891] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 786.511286] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 786.564636] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 786.574784] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 786.789187] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 803.155639] usb 1-6.2: USB disconnect, device number 18 [ 804.612259] usb 1-6.2: new low-speed USB device number 19 using xhci_hcd [ 804.634271] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 804.639010] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 804.643720] usb 1-6.2: Product: USB Optical Mouse [ 804.648406] usb 1-6.2: Manufacturer: Logitech [ 804.685280] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 804.755267] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input21 [ 804.804263] hid-generic 0003:046D:C05A.0010: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 819.982164] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 820.202946] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 820.458187] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 820.594982] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 821.238977] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 821.361236] [drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit [ 821.391318] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 821.513078] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 821.645881] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 821.836655] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 821.948553] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 822.124196] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 822.126016] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 822.241534] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 822.360680] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 822.483147] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 822.677341] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 855.764017] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 855.994374] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 856.272506] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 856.666091] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 856.903541] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 857.440787] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 857.637995] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 857.756432] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 857.940210] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 858.003274] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 858.047714] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 858.050499] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 858.151894] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 858.290823] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 858.464962] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 864.851640] usb 1-6.2: USB disconnect, device number 19 [ 866.308250] usb 1-6.2: new low-speed USB device number 20 using xhci_hcd [ 866.328238] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 866.332978] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 866.337701] usb 1-6.2: Product: USB Optical Mouse [ 866.342409] usb 1-6.2: Manufacturer: Logitech [ 866.373276] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 866.455260] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input22 [ 866.497258] hid-generic 0003:046D:C05A.0011: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 891.191361] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 891.459347] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 891.790444] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 892.440905] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 892.744047] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 892.926257] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 893.208014] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 893.353192] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 893.503882] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 893.631106] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 893.854181] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 893.894645] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 893.917330] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 893.919950] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 893.974070] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 894.020754] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 894.170008] [drm:valleyview_set_rps], GPU freq request from 708 MHz (217) to 708 MHz (217) [ 894.512315] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 926.547643] usb 1-6.2: USB disconnect, device number 20 [ 928.004242] usb 1-6.2: new low-speed USB device number 21 using xhci_hcd [ 928.024270] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 928.029016] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 928.033744] usb 1-6.2: Product: USB Optical Mouse [ 928.038458] usb 1-6.2: Manufacturer: Logitech [ 928.055271] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 928.117258] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input23 [ 928.145790] hid-generic 0003:046D:C05A.0012: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 929.086231] [drm:valleyview_set_rps], GPU freq request from 167 MHz (191) to 708 MHz (217) [ 929.088828] [drm:intel_crtc_cursor_set], cursor off [ 929.088837] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 929.088844] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 929.088849] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 929.088854] [drm:intel_crtc_cursor_set], cursor off [ 929.088857] [drm:intel_crtc_set_config], [CRTC:6] [NOFB] [ 929.088861] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 929.088865] [drm:intel_modeset_stage_output_state], [CONNECTOR:20:eDP-1] to [CRTC:3] [ 988.244145] usb 1-6.2: USB disconnect, device number 21 [ 989.701749] usb 1-6.2: new low-speed USB device number 22 using xhci_hcd [ 989.724604] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c05a [ 989.729432] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 989.734195] usb 1-6.2: Product: USB Optical Mouse [ 989.738919] usb 1-6.2: Manufacturer: Logitech [ 989.744165] usb 1-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 989.751566] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input24 [ 989.757039] hid-generic 0003:046D:C05A.0013: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.2/input0 [ 991.316134] usb 1-6.2: USB disconnect, device number 22