[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.0-rc3_drm-intel-nightly_513e58_20140228+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #362 SMP Fri Feb 28 08:57:14 CST 2014 [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f3f7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f3f8000-0x000000007f43dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f43e000-0x000000007f444fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f445000-0x000000007f447fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f448000-0x000000007f46bfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f46c000-0x000000007f46cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f46d000-0x000000007f476fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f477000-0x000000007f497fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f498000-0x000000007f49efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f49f000-0x000000007f5fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-N014/MS-N014, BIOS EN014IMS.10B 11/30/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7f600 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 080000000 write-back [ 0.000000] 1 base 07F600000 mask 0FFF00000 write-through [ 0.000000] 2 base 07F700000 mask 0FFF00000 uncachable [ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000fcac0-0x000fcacf] mapped at [c00fcac0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x033fffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff] [ 0.000000] [mem 0x37000000-0x373fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff] [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff] [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x02e77000, 0x02e77fff] PGTABLE [ 0.000000] ACPI: RSDP 000f0410 000024 (v03 MSI_NB) [ 0.000000] ACPI: XSDT 7f43e080 00004C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 7f444ad0 0000F4 (v04 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0x7F473F40/0x000000007F473F80, using 64-bit address (20131218/tbfadt-271) [ 0.000000] ACPI: DSDT 7f43e158 006975 (v02 MSI_NB MEGABOOK 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 7f473f80 000040 [ 0.000000] ACPI: APIC 7f444bc8 000062 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 7f444c30 00003C (v01 A M I ITL 945. 01072009 MSFT 00000097) [ 0.000000] ACPI: SLIC 7f444c70 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: HPET 7f444de8 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000003) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x02e78000, 0x02e78fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0x7f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x7f3f7fff] [ 0.000000] node 0: [mem 0x7f46c000-0x7f46cfff] [ 0.000000] node 0: [mem 0x7f49f000-0x7f5fffff] [ 0.000000] On node 0 totalpages: 521463 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 294236 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f67da000 s26400 r0 d22752 u49152 [ 0.000000] pcpu-alloc: s26400 r0 d22752 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519687 [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_02_28/drm-intel-nightly/513e589d9dfd6c46617a7875d79242bf2ce68490/bzImage_i386 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_02_28/drm-intel-nightly/513e589d9dfd6c46617a7875d79242bf2ce68490/modules_i386/lib/modules/3.14.0-rc3_drm-intel-nightly_513e58_20140228+ [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f600) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 2037252K/2085852K available (6781K kernel code, 411K rwdata, 3236K rodata, 20288K init, 384K bss, 48600K reserved, 1176944K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1a31000 - 0xc2e01000 (20288 kB) .data : 0xc169f845 - 0xc1a30c40 (3652 kB) .text : 0xc1000000 - 0xc169f845 (6782 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000 [ 0.000000] ACPI: Core revision 20131218 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1662.514 MHz processor [ 0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.02 BogoMIPS (lpj=1662514) [ 0.002311] pid_max: default: 32768 minimum: 301 [ 0.003069] Security Framework initialized [ 0.003238] Mount-cache hash table entries: 512 [ 0.003801] Disabled fast string operations [ 0.004022] CPU: Physical Processor ID: 0 [ 0.004171] CPU: Processor Core ID: 0 [ 0.004319] mce: CPU supports 5 MCE banks [ 0.004476] CPU0: Thermal monitoring enabled (TM2) [ 0.004646] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 tlb_flushall_shift: 6 [ 0.005230] Freeing SMP alternatives memory: 32K (c2e01000 - c2e09000) [ 0.005500] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.006145] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.016310] smpboot: CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz (fam: 06, model: 1c, stepping: 0a) [ 0.017000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver. [ 0.017000] ... version: 3 [ 0.017000] ... bit width: 40 [ 0.017000] ... generic registers: 2 [ 0.017000] ... value mask: 000000ffffffffff [ 0.017005] ... max period: 000000007fffffff [ 0.017159] ... fixed-purpose events: 3 [ 0.017308] ... event mask: 0000000700000003 [ 0.018076] CPU 1 irqstacks, hard=f60a2000 soft=f60b0000 [ 0.018081] x86: Booting SMP configuration: [ 0.018234] .... node #0, CPUs: #1 [ 0.003000] Initializing CPU#1 [ 0.003000] Disabled fast string operations [ 0.030093] x86: Booted up 1 node, 2 CPUs [ 0.031006] smpboot: Total of 2 processors activated (6650.05 BogoMIPS) [ 0.032004] devtmpfs: initialized [ 0.032933] PM: Registering ACPI NVS region [mem 0x7f3f8000-0x7f43dfff] (286720 bytes) [ 0.033016] PM: Registering ACPI NVS region [mem 0x7f445000-0x7f447fff] (12288 bytes) [ 0.033273] PM: Registering ACPI NVS region [mem 0x7f46d000-0x7f476fff] (40960 bytes) [ 0.033531] PM: Registering ACPI NVS region [mem 0x7f498000-0x7f49efff] (28672 bytes) [ 0.034211] xor: measuring software checksum speed [ 0.043496] pIII_sse : 5192.000 MB/sec [ 0.053496] prefetch64-sse: 5784.000 MB/sec [ 0.053650] xor: using function: prefetch64-sse (5784.000 MB/sec) [ 0.053830] RTC time: 20:17:05, date: 02/28/14 [ 0.054094] NET: Registered protocol family 16 [ 0.055086] cpuidle: using governor ladder [ 0.055170] cpuidle: using governor menu [ 0.055504] ACPI: bus type PCI registered [ 0.056144] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.057008] PCI: not using MMCONFIG [ 0.078673] PCI: Using configuration type 1 for base access [ 0.123156] bio: create slab at 0 [ 0.140156] raid6: mmxx1 382 MB/s [ 0.157058] raid6: mmxx2 742 MB/s [ 0.174050] raid6: sse1x1 308 MB/s [ 0.191094] raid6: sse1x2 574 MB/s [ 0.208056] raid6: sse2x1 613 MB/s [ 0.225047] raid6: sse2x2 1148 MB/s [ 0.225196] raid6: using algorithm sse2x2 (1148 MB/s) [ 0.225349] raid6: using ssse3x1 recovery algorithm [ 0.225553] ACPI: Added _OSI(Module Device) [ 0.225553] ACPI: Added _OSI(Processor Device) [ 0.225553] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.226013] ACPI: Added _OSI(Processor Aggregator Device) [ 0.229451] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.230029] ACPI Error: No handler for Region [EC__] (f600eae0) [EmbeddedControl] (20131218/evregion-162) [ 0.230379] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131218/exfldio-299) [ 0.230727] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC__._REG] (Node f60112a0), AE_NOT_EXIST (20131218/psparse-536) [ 0.232252] ACPI: Executed 1 blocks of module-level executable AML code [ 0.237723] ACPI: SSDT 7f46e918 000444 (v01 AMI IST 00000001 MSFT 03000001) [ 0.239554] ACPI: Dynamic OEM Table Load: [ 0.239788] ACPI: SSDT (null) 000444 (v01 AMI IST 00000001 MSFT 03000001) [ 0.242282] ACPI: Interpreter enabled [ 0.242471] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.242843] ACPI: (supports S0 S1 S3 S4 S5) [ 0.242995] ACPI: Using IOAPIC for interrupt routing [ 0.243062] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.246334] [Firmware Info]: PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] not reserved in ACPI motherboard resources [ 0.246603] PCI: not using MMCONFIG [ 0.246782] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.246782] ACPI: No dock devices found. [ 0.768278] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.768453] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.769202] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.769662] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.770080] PCI host bridge to bus 0000:00 [ 0.770202] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.770360] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.770523] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.770684] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.770847] pci_bus 0000:00: root bus resource [mem 0x7f700000-0xffffffff] [ 0.771030] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000 [ 0.771233] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000 [ 0.771233] pci 0000:00:02.0: reg 0x10: [mem 0xfea80000-0xfeafffff] [ 0.771233] pci 0000:00:02.0: reg 0x14: [io 0xf0f0-0xf0f7] [ 0.771233] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] [ 0.771233] pci 0000:00:02.0: reg 0x1c: [mem 0xfe700000-0xfe7fffff] [ 0.772051] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000 [ 0.772067] pci 0000:00:02.1: reg 0x10: [mem 0xfea00000-0xfea7ffff] [ 0.772264] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.772264] pci 0000:00:1b.0: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.772264] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.773012] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.773012] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.773012] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.773062] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.773174] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.773268] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.774058] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.774121] pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f] [ 0.774319] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.774319] pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f] [ 0.774322] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.774322] pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f] [ 0.775053] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.775116] pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f] [ 0.775316] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.775316] pci 0000:00:1d.7: reg 0x10: [mem 0xfeb05000-0xfeb053ff] [ 0.775316] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.775420] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.775420] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.776038] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 [ 0.776331] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.776331] pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.776331] pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3] [ 0.776331] pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7] [ 0.776331] pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3] [ 0.776331] pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af] [ 0.777016] pci 0000:00:1f.2: reg 0x24: [mem 0xfeb04000-0xfeb043ff] [ 0.777070] pci 0000:00:1f.2: PME# supported from D3hot [ 0.777267] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.777267] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.777318] pci 0000:01:00.0: [1814:3090] type 00 class 0x028000 [ 0.777318] pci 0000:01:00.0: reg 0x10: [mem 0xfe900000-0xfe90ffff] [ 0.780034] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.780196] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.780205] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.780217] pci 0000:00:1c.0: bridge window [mem 0x7f700000-0x7f8fffff 64bit pref] [ 0.780344] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000 [ 0.780344] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.780344] pci 0000:02:00.0: reg 0x18: [mem 0xe0010000-0xe0010fff 64bit pref] [ 0.780344] pci 0000:02:00.0: reg 0x20: [mem 0xe0000000-0xe000ffff 64bit pref] [ 0.780344] pci 0000:02:00.0: reg 0x30: [mem 0xfe800000-0xfe81ffff pref] [ 0.780344] pci 0000:02:00.0: supports D1 D2 [ 0.780344] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.782032] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.782192] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.782201] pci 0000:00:1c.3: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.782213] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe00fffff 64bit pref] [ 0.782311] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.782311] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.782311] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.782311] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.782311] pci 0000:00:1e.0: bridge window [mem 0x7f700000-0xffffffff] (subtractive decode) [ 0.782323] pci_bus 0000:00: on NUMA node 0 [ 0.783150] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.783935] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.784863] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.785686] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.786472] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.787443] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.788308] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.789308] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.790130] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.790427] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.791083] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.792016] vgaarb: loaded [ 0.792162] vgaarb: bridge control possible 0000:00:02.0 [ 0.792498] SCSI subsystem initialized [ 0.793061] libata version 3.00 loaded. [ 0.793081] ACPI: bus type USB registered [ 0.793216] usbcore: registered new interface driver usbfs [ 0.794060] usbcore: registered new interface driver hub [ 0.794204] usbcore: registered new device driver usb [ 0.795007] pps_core: LinuxPPS API ver. 1 registered [ 0.795007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.795023] PTP clock support registered [ 0.796067] PCI: Using ACPI for IRQ routing [ 0.796192] PCI: pci_cache_line_size set to 64 bytes [ 0.796260] Expanded resource reserved due to conflict with PCI Bus 0000:01 [ 0.796423] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.796429] e820: reserve RAM buffer [mem 0x7f3f8000-0x7fffffff] [ 0.796434] e820: reserve RAM buffer [mem 0x7f46d000-0x7fffffff] [ 0.796439] e820: reserve RAM buffer [mem 0x7f600000-0x7fffffff] [ 0.797082] NetLabel: Initializing [ 0.797233] NetLabel: domain hash size = 128 [ 0.797382] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.797382] NetLabel: unlabeled traffic allowed by default [ 0.797382] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.797540] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.797859] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.800036] Switched to clocksource hpet [ 0.800428] pnp: PnP ACPI init [ 0.800613] ACPI: bus type PNP registered [ 0.800997] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.801195] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.801422] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.801938] system 00:02: [io 0x0800-0x087f] could not be reserved [ 0.802134] system 00:02: [io 0x0480-0x04bf] has been reserved [ 0.802300] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.802464] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.802626] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.802787] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.802949] system 00:02: [mem 0xfff00000-0xffffffff] has been reserved [ 0.803134] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.803174] pnp 00:03: [dma 4] [ 0.803331] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.803579] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.803742] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.803975] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.804170] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.804352] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.804571] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.804809] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.805665] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.806042] pnp: PnP ACPI: found 11 devices [ 0.806196] ACPI: bus type PNP unregistered [ 0.854378] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.854543] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.854707] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.854872] pci 0000:00:1c.0: bridge window [mem 0x7f700000-0x7f8fffff 64bit pref] [ 0.855162] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.855320] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.855483] pci 0000:00:1c.3: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.855649] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe00fffff 64bit pref] [ 0.855911] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.856104] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.856111] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.856117] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.856124] pci_bus 0000:00: resource 7 [mem 0x7f700000-0xffffffff] [ 0.856130] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.856137] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.856143] pci_bus 0000:01: resource 2 [mem 0x7f700000-0x7f8fffff 64bit pref] [ 0.856150] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.856156] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.856163] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref] [ 0.856169] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.856176] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.856182] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.856188] pci_bus 0000:03: resource 7 [mem 0x7f700000-0xffffffff] [ 0.856261] NET: Registered protocol family 2 [ 0.856708] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.856903] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.857145] TCP: Hash tables configured (established 8192 bind 8192) [ 0.857348] TCP: reno registered [ 0.857498] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.857669] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.857954] NET: Registered protocol family 1 [ 0.858325] RPC: Registered named UNIX socket transport module. [ 0.858484] RPC: Registered udp transport module. [ 0.858635] RPC: Registered tcp transport module. [ 0.858785] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.858958] pci 0000:00:02.0: Boot video device [ 0.859883] PCI: CLS 64 bytes, default 64 [ 1.852974] futex hash table entries: 512 (order: 2, 16384 bytes) [ 1.853258] audit: initializing netlink subsys (disabled) [ 1.853437] audit: type=2000 audit(1393618626.852:1): initialized [ 1.912985] bounce pool size: 64 pages [ 1.913214] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.925385] VFS: Disk quotas dquot_6.5.2 [ 1.925770] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.929642] NFS: Registering the id_resolver key type [ 1.929823] Key type id_resolver registered [ 1.929973] Key type id_legacy registered [ 1.930157] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.930814] fuse init (API version 7.22) [ 1.931590] msgmni has been set to 1680 [ 1.932727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.932985] io scheduler noop registered [ 1.933170] io scheduler deadline registered [ 1.933694] io scheduler cfq registered (default) [ 1.934703] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.935921] Monitor-Mwait will be used to enter C-1 state [ 1.935945] Monitor-Mwait will be used to enter C-2 state [ 1.935966] Monitor-Mwait will be used to enter C-3 state [ 1.935983] tsc: Marking TSC unstable due to TSC halts in idle [ 1.936188] ACPI: acpi_idle registered with cpuidle [ 1.939269] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.939432] ACPI: Thermal Zone [THRM] (65 C) [ 1.939923] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.942717] Non-volatile memory driver v1.3 [ 1.942887] Linux agpgart interface v0.103 [ 1.943385] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset [ 1.943686] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.944190] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.944762] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.953531] brd: module loaded [ 1.954807] Loading iSCSI transport class v2.0-870. [ 1.956811] iscsi: registered transport (tcp) [ 1.957525] Adaptec aacraid driver 1.2-0[30200]-ms [ 1.957838] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 1.958610] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k. [ 1.959196] iscsi: registered transport (qla4xxx) [ 1.959483] QLogic iSCSI HBA Driver [ 1.959634] Emulex LightPulse Fibre Channel SCSI driver 8.3.43 [ 1.959790] Copyright(c) 2004-2013 Emulex. All rights reserved. [ 1.960637] DC390: clustering now enabled by default. If you get problems load [ 1.960896] with "disable_clustering=1" and report to maintainers [ 1.961361] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 1.961893] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 1.962359] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 1.962645] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 1.963120] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1.963516] osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 1.964566] SCSI Media Changer driver v0.25 [ 1.965890] ata_piix 0000:00:1f.2: version 2.13 [ 1.966106] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.969769] scsi0 : ata_piix [ 1.970437] scsi1 : ata_piix [ 1.970923] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19 [ 1.971157] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19 [ 1.979374] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.19 (December 19, 2013) [ 1.979717] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11) [ 1.980384] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.980545] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.980850] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.981033] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.981369] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.981527] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.981838] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 1.982023] igb: Copyright (c) 2007-2013 Intel Corporation. [ 1.982493] usbcore: registered new interface driver zd1201 [ 1.982774] usbcore: registered new interface driver catc [ 1.983124] usbcore: registered new interface driver kaweth [ 1.985903] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.986353] usbcore: registered new interface driver pegasus [ 1.986633] usbcore: registered new interface driver rtl8150 [ 1.986924] usbcore: registered new interface driver asix [ 1.987245] usbcore: registered new interface driver ax88179_178a [ 1.987526] usbcore: registered new interface driver cdc_ether [ 1.987806] usbcore: registered new interface driver r815x [ 1.988128] usbcore: registered new interface driver dm9601 [ 1.988428] usbcore: registered new interface driver CoreChips [ 1.988717] usbcore: registered new interface driver gl620a [ 1.989021] usbcore: registered new interface driver net1080 [ 1.989318] usbcore: registered new interface driver plusb [ 1.989601] usbcore: registered new interface driver rndis_host [ 1.989883] usbcore: registered new interface driver cdc_subset [ 1.990208] usbcore: registered new interface driver zaurus [ 1.990490] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.990888] usbcore: registered new interface driver cdc_ncm [ 1.991690] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.991855] ehci-pci: EHCI PCI platform driver [ 1.992235] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.992639] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.992916] ehci-pci 0000:00:1d.7: debug port 1 [ 1.997039] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.997085] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeb05000 [ 2.003120] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.003397] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.003561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.003815] usb usb1: Product: EHCI Host Controller [ 2.003969] usb usb1: Manufacturer: Linux 3.14.0-rc3_drm-intel-nightly_513e58_20140228+ ehci_hcd [ 2.004243] usb usb1: SerialNumber: 0000:00:1d.7 [ 2.005052] hub 1-0:1.0: USB hub found [ 2.005240] hub 1-0:1.0: 8 ports detected [ 2.006529] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.006701] ohci-pci: OHCI PCI platform driver [ 2.006994] uhci_hcd: USB Universal Host Controller Interface driver [ 2.007361] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.007774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.008104] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 2.008502] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.008667] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.008921] usb usb2: Product: UHCI Host Controller [ 2.009100] usb usb2: Manufacturer: Linux 3.14.0-rc3_drm-intel-nightly_513e58_20140228+ uhci_hcd [ 2.009369] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.010124] hub 2-0:1.0: USB hub found [ 2.010309] hub 2-0:1.0: 2 ports detected [ 2.010909] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.011372] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.011669] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 2.012109] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.012275] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.012529] usb usb3: Product: UHCI Host Controller [ 2.012682] usb usb3: Manufacturer: Linux 3.14.0-rc3_drm-intel-nightly_513e58_20140228+ uhci_hcd [ 2.012941] usb usb3: SerialNumber: 0000:00:1d.1 [ 2.013731] hub 3-0:1.0: USB hub found [ 2.013915] hub 3-0:1.0: 2 ports detected [ 2.014574] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.015001] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.015357] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 2.015749] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.015913] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.016205] usb usb4: Product: UHCI Host Controller [ 2.016360] usb usb4: Manufacturer: Linux 3.14.0-rc3_drm-intel-nightly_513e58_20140228+ uhci_hcd [ 2.016618] usb usb4: SerialNumber: 0000:00:1d.2 [ 2.017410] hub 4-0:1.0: USB hub found [ 2.017592] hub 4-0:1.0: 2 ports detected [ 2.018245] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.018679] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.018999] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 [ 2.019426] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.019590] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.019845] usb usb5: Product: UHCI Host Controller [ 2.019999] usb usb5: Manufacturer: Linux 3.14.0-rc3_drm-intel-nightly_513e58_20140228+ uhci_hcd [ 2.020282] usb usb5: SerialNumber: 0000:00:1d.3 [ 2.021060] hub 5-0:1.0: USB hub found [ 2.021244] hub 5-0:1.0: 2 ports detected [ 2.022270] usbcore: registered new interface driver usb-storage [ 2.022719] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.046464] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.046639] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.047456] mousedev: PS/2 mouse device common for all mice [ 2.048078] rtc_cmos 00:04: RTC can wake from S4 [ 2.048594] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.048800] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.049219] i2c /dev entries driver [ 2.049703] hidraw: raw HID events driver (C) Jiri Kosina [ 2.052541] usbcore: registered new interface driver usbhid [ 2.052700] usbhid: USB HID core driver [ 2.052988] TCP: cubic registered [ 2.053170] Initializing XFRM netlink socket [ 2.053348] NET: Registered protocol family 17 [ 2.053583] Key type dns_resolver registered [ 2.054726] Using IPI No-Shortcut mode [ 2.055512] registered taskstats version 1 [ 2.056396] bio: create slab at 1 [ 2.057775] Btrfs loaded [ 2.058583] Magic number: 2:920:296 [ 2.058786] tty tty29: hash matches [ 2.059229] PM: Hibernation image not present or could not be loaded. [ 2.059281] Warning: unable to open an initial console. [ 2.071461] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.472548] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133 [ 2.472715] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.476592] ata1.00: configured for UDMA/133 [ 2.477028] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5 [ 2.478157] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.478660] sd 0:0:0:0: [sda] Write Protect is off [ 2.478829] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.478934] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.479184] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.490213] sda: sda1 sda2 [ 2.491596] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.508751] Freeing unused kernel memory: 20288K (c1a31000 - c2e01000) [ 2.563089] usb 1-6: new high-speed USB device number 3 using ehci-pci [ 2.622385] dracut: dracut-018-35.git20120510.fc17 [ 2.732232] udevd[1214]: starting version 182 [ 2.790684] [drm] Initialized drm 1.1.0 20060810 [ 2.793203] usb 1-6: New USB device found, idVendor=5986, idProduct=02c1 [ 2.793409] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.793606] usb 1-6: Product: BisonCam, NB Pro [ 2.793786] usb 1-6: Manufacturer: BISON Corporation [ 2.793973] usb 1-6: SerialNumber: 20090702 [ 2.802701] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0D:00/input/input3 [ 2.804171] ACPI: Lid Switch [LID0] [ 2.805528] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 2.814038] ACPI: Power Button [PWRB] [ 2.815235] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 2.816185] ACPI: Power Button [PWRF] [ 2.838169] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0xa011 flags=is_mobile,is_g33,need_gfx_hws,is_pineview,has_hotplug,has_overlay, [ 2.838349] [drm:intel_detect_pch], No PCH found? [ 2.838359] [drm] Memory usable by graphics device = 512M [ 2.838551] [drm:i915_gem_gtt_init], GMADR size = 256M [ 2.838558] [drm:i915_gem_gtt_init], GTT stolen size = 8M [ 2.852486] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7f445018 [ 2.852522] [drm:intel_opregion_setup], Public ACPI methods supported [ 2.852530] [drm:intel_opregion_setup], SWSCI supported [ 2.858111] [drm:swsci_setup], SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241 [ 2.858120] [drm:intel_opregion_setup], ASLE supported [ 2.858225] i915 0000:00:02.0: irq 40 for MSI/MSI-X [ 2.858253] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.858449] [drm] Driver supports precise vblank timestamp query. [ 2.858635] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz [ 2.858646] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT PINEVIEW d [ 2.858657] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.858664] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 2.858675] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 2.858688] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 0 45000 1024 1072 1104 1200 600 603 609 625 0x8 0xa [ 2.858697] [drm:parse_lfp_panel_data], VBT initial LVDS value 40300300 [ 2.858705] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active low, min brightness 0, level 0 [ 2.858716] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 2.858727] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.858734] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 2.858742] [drm:parse_mipi], No MIPI BDB found [ 2.858773] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 2.858798] [drm:i915_stolen_to_physical] *ERROR* conflict detected with stolen region: [0x7f800000 - 0x80000000] [ 2.859223] [drm:intel_modeset_init], 2 display pipes available. [ 2.859250] [drm:intel_modeset_init], pipe A sprite A init failed: -19 [ 2.859273] [drm:intel_modeset_init], pipe B sprite B init failed: -19 [ 2.859284] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.885955] [drm:intel_lvds_init], using preferred mode from EDID: [ 2.885969] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa [ 2.885983] [drm:intel_lvds_init], detected single-link lvds configuration [ 2.886760] [drm:intel_panel_setup_backlight], failed to setup backlight for connector LVDS-1 [ 2.887390] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled [ 2.887409] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled [ 2.887421] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B [ 2.887430] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: disabled, pipe A [ 2.887438] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled [ 2.887447] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: disabled [ 2.887458] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 2.887463] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 2.887467] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 2.887473] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.887479] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.887483] [drm:intel_dump_pipe_config], requested mode: [ 2.887491] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.887495] [drm:intel_dump_pipe_config], adjusted mode: [ 2.887502] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.887509] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.887513] [drm:intel_dump_pipe_config], port clock: 0 [ 2.887517] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 2.887523] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.887528] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.887532] [drm:intel_dump_pipe_config], ips: 0 [ 2.887536] [drm:intel_dump_pipe_config], double wide: 0 [ 2.887542] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B [ 2.887547] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 2.887551] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 2.887557] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.887563] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.887567] [drm:intel_dump_pipe_config], requested mode: [ 2.887574] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0 [ 2.887578] [drm:intel_dump_pipe_config], adjusted mode: [ 2.887585] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 2.887593] [drm:intel_dump_crtc_timings], crtc timings: 45000 1024 1072 1104 1200 600 603 609 625, type: 0x0 flags: 0xa [ 2.887597] [drm:intel_dump_pipe_config], port clock: 45000 [ 2.887602] [drm:intel_dump_pipe_config], pipe src size: 640x400 [ 2.887607] [drm:intel_dump_pipe_config], gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000 [ 2.887612] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.887616] [drm:intel_dump_pipe_config], ips: 0 [ 2.887620] [drm:intel_dump_pipe_config], double wide: 0 [ 2.887627] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 2.887633] [drm:check_encoder_state], [ENCODER:6:LVDS-6] [ 2.887639] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 2.887644] [drm:check_crtc_state], [CRTC:3] [ 2.887649] [drm:check_crtc_state], [CRTC:4] [ 2.887665] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 1ffff000] [ 2.889159] [drm:init_status_page], render ring hws offset: 0x00001000 [ 2.889440] [drm] initialized overlay support [ 2.889609] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 2.889615] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] [ 2.889634] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 2.889644] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa [ 2.889650] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 2.889656] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 2.904119] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.905112] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 2.905118] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.905123] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 2.905129] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 2.905413] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.905419] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 2.905423] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.905429] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 2.905434] [drm:drm_setup_crtcs], [ 2.905453] [drm:drm_enable_connectors], connector 5 enabled? yes [ 2.905457] [drm:drm_enable_connectors], connector 11 enabled? no [ 2.905463] [drm:intel_fb_initial_config], looking for cmdline mode on connector 5 [ 2.905468] [drm:intel_fb_initial_config], looking for preferred mode on connector 5 [ 2.905473] [drm:intel_fb_initial_config], connector LVDS-1 on crtc 4: 1024x600 [ 2.905478] [drm:intel_fb_initial_config], connector 11 not enabled, skipping [ 2.905483] [drm:drm_setup_crtcs], desired mode 1024x600 set on crtc 4 [ 2.905490] [drm:intelfb_create], no BIOS fb, allocating a new one [ 2.910072] [drm:intelfb_create], allocated 1024x600 fb: 0x00030000, bo f5980000 [ 2.910464] fbcon: inteldrmfb (fb0) is primary device [ 2.912587] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 2.912594] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.912599] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 2.912604] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 2.912607] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 2.912610] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 2.912616] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.912622] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa [ 2.912625] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0 [ 2.912629] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 2.912634] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 2.912640] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains [ 2.912645] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18) [ 2.912652] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1 [ 2.912655] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B [ 2.912657] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 2.912660] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1 [ 2.912664] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.912667] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.912669] [drm:intel_dump_pipe_config], requested mode: [ 2.912675] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa [ 2.912677] [drm:intel_dump_pipe_config], adjusted mode: [ 2.912683] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa [ 2.912689] [drm:intel_dump_crtc_timings], crtc timings: 45000 1024 1072 1104 1200 600 603 609 625, type: 0x48 flags: 0xa [ 2.912691] [drm:intel_dump_pipe_config], port clock: 45000 [ 2.912693] [drm:intel_dump_pipe_config], pipe src size: 1024x600 [ 2.912697] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000 [ 2.912700] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.912702] [drm:intel_dump_pipe_config], ips: 0 [ 2.912704] [drm:intel_dump_pipe_config], double wide: 0 [ 3.024138] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 3.176042] [drm:i9xx_pfit_disable], disabling pfit, current: 0x80002668 [ 3.176049] [drm:pineview_update_wm], Self-refresh is disabled [ 3.176056] [drm:i9xx_get_refclk], using SSC reference clock of 100000 kHz [ 3.178109] [drm:i9xx_update_plane], Writing base 00030000 00000000 0 0 4096 [ 3.178115] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x600] [ 3.178810] [drm:intel_calculate_wm], FIFO entries required for mode: 10 [ 3.178812] [drm:intel_calculate_wm], FIFO watermark level: 492 [ 3.178816] [drm:pineview_update_wm], DSPFW1 register is f6030f0f [ 3.178818] [drm:intel_calculate_wm], FIFO entries required for mode: 12 [ 3.178820] [drm:intel_calculate_wm], FIFO watermark level: 495 [ 3.178823] [drm:intel_calculate_wm], FIFO entries required for mode: 95 [ 3.178825] [drm:intel_calculate_wm], FIFO watermark level: 407 [ 3.178828] [drm:intel_calculate_wm], FIFO entries required for mode: 96 [ 3.178830] [drm:intel_calculate_wm], FIFO watermark level: 411 [ 3.178833] [drm:pineview_update_wm], DSPFW3 register is 3f3f0197 [ 3.178835] [drm:pineview_update_wm], Self-refresh is enabled [ 3.206636] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0, board id: 3655, fw id: 430020 [ 3.261617] usb 4-1: New USB device found, idVendor=0db0, idProduct=3801 [ 3.261623] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.291539] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 [ 3.567125] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 3.567131] [drm:check_encoder_state], [ENCODER:6:LVDS-6] [ 3.567135] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 3.567138] [drm:check_crtc_state], [CRTC:3] [ 3.567143] [drm:check_crtc_state], [CRTC:4] [ 3.567200] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 3.567206] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 3.567210] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 3.574648] Console: switching to colour frame buffer device 128x37 [ 3.574659] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 3.574663] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 3.574667] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 3.583197] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.583318] i915 0000:00:02.0: registered panic notifier [ 3.589130] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.592332] acpi device:20: registered as cooling_device2 [ 3.592994] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 3.597675] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.615208] dracut: Starting plymouth daemon [ 3.641509] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 3.641517] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 3.641522] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 3.658523] [drm:i915_gem_open], [ 3.658562] [drm:intel_crtc_cursor_set], cursor off [ 3.658569] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 3.658577] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.658584] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 3.658590] [drm:intel_crtc_cursor_set], cursor off [ 3.658596] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 3.658604] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 3.658610] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 3.658634] [drm:i915_gem_open], [ 3.658656] [drm:intel_crtc_cursor_set], cursor off [ 3.658661] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 3.658667] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.658673] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 3.658678] [drm:intel_crtc_cursor_set], cursor off [ 3.658684] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 3.658690] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 3.658696] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 3.658720] [drm:i915_gem_open], [ 3.658886] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 3.658896] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 3.658914] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 3.658921] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 3.658927] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] [ 3.658946] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 3.658956] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa [ 3.658965] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 3.663984] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 3.663996] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 3.664002] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 3.678115] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.679109] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.679116] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.679121] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3.679126] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3.679412] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.679417] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3.679421] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.679428] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 3.679444] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 3.679450] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 3.679455] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 3.693113] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.694110] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.694116] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.694121] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3.694126] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3.694410] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.694415] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3.694419] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.694425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 4.045710] ACPI: AC Adapter [ADP1] (on-line) [ 4.071482] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.079746] r8169 0000:02:00.0: irq 41 for MSI/MSI-X [ 4.102367] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 4.131731] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 4.137664] r8169 0000:02:00.0 eth0: RTL8102e at 0xf86da000, 40:61:86:1a:f7:ec, XID 04c00000 IRQ 41 [ 4.148830] ACPI: Battery Slot [BAT1] (battery present) [ 4.168373] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 4.171340] msi_laptop: Identified laptop model 'MSI N014' [ 4.176532] iTCO_vendor_support: vendor-support=0 [ 4.182614] msi_laptop: Brightness ignored, must be controlled by ACPI video driver [ 4.193476] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 4.198975] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860) [ 4.213178] wmi: Mapper loaded [ 4.215963] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.222915] input: MSI Laptop hotkeys as /devices/virtual/input/input8 [ 4.225611] msi_laptop: driver 0.5 successfully loaded [ 4.234683] ALSA sound/pci/hda/patch_realtek.c:434 SKU: Nid=0x1d sku_cfg=0x4006922d [ 4.234693] ALSA sound/pci/hda/patch_realtek.c:436 SKU: port_connectivity=0x1 [ 4.234699] ALSA sound/pci/hda/patch_realtek.c:437 SKU: enable_pcbeep=0x0 [ 4.234705] ALSA sound/pci/hda/patch_realtek.c:438 SKU: check_sum=0x00000006 [ 4.234711] ALSA sound/pci/hda/patch_realtek.c:439 SKU: customization=0x00000092 [ 4.234717] ALSA sound/pci/hda/patch_realtek.c:440 SKU: external_amp=0x5 [ 4.234722] ALSA sound/pci/hda/patch_realtek.c:441 SKU: platform_type=0x1 [ 4.234728] ALSA sound/pci/hda/patch_realtek.c:442 SKU: swap=0x0 [ 4.234734] ALSA sound/pci/hda/patch_realtek.c:443 SKU: override=0x1 [ 4.236311] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker [ 4.236322] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.236331] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 4.236337] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 4.236344] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 4.236352] ALSA sound/pci/hda/hda_auto_parser.c:410 Internal Mic=0x19 [ 4.236361] ALSA sound/pci/hda/hda_auto_parser.c:410 Mic=0x18 [ 4.236369] ALSA sound/pci/hda/patch_realtek.c:504 realtek: No valid SSID, checking pincfg 0x4006922d for NID 0x1d [ 4.236377] ALSA sound/pci/hda/patch_realtek.c:520 realtek: Enabling init ASM_ID=0x922d CODEC_ID=10ec0662 [ 4.458528] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.554458] random: nonblocking pool is initialized [ 4.658605] dracut: Checking ext4: /dev/sda2 [ 4.663153] dracut: issuing e2fsck -a /dev/sda2 [ 4.839325] dracut: /dev/sda2: clean, 752027/9641984 files, 15209148/38558720 blocks [ 4.844588] dracut: Remounting /dev/sda2 with -o ro [ 4.892087] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.010376] dracut: Mounted root filesystem /dev/sda2 [ 5.146554] device-mapper: uevent: version 1.0.3 [ 5.151395] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 5.293994] dracut: Switching root [ 6.182948] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 6.387264] systemd[1]: Failed to insert module 'ipv6' [ 6.446819] systemd[1]: Set hostname to . [ 6.867161] LVM: Logical Volume autoactivation enabled. [ 6.870869] LVM: Activation generator successfully completed. [ 8.072548] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 8.076467] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.080237] systemd[1]: Starting Syslog Socket. [ 8.084189] systemd[1]: Listening on Syslog Socket. [ 8.088053] systemd[1]: Starting Replay Read-Ahead Data... [ 8.096948] systemd[1]: Starting Collect Read-Ahead Data... [ 8.104996] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 8.111939] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 8.112029] systemd[1]: Starting Delayed Shutdown Socket. [ 8.122182] systemd-readahead[2282]: Failed to create fanotify object: Function not implemented [ 8.122632] systemd[1]: Listening on Delayed Shutdown Socket. [ 8.122714] systemd[1]: Starting Encrypted Volumes. [ 8.125127] systemd-readahead[2281]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 8.143547] systemd[1]: Reached target Encrypted Volumes. [ 8.143826] systemd[1]: Starting udev Kernel Socket. [ 8.151381] systemd[1]: Listening on udev Kernel Socket. [ 8.151621] systemd[1]: Starting udev Control Socket. [ 8.162615] systemd[1]: Listening on udev Control Socket. [ 8.162777] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 8.170206] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.170297] systemd[1]: Starting Journal Socket. [ 8.181485] systemd[1]: Listening on Journal Socket. [ 8.181653] systemd[1]: Mounting Huge Pages File System... [ 8.193358] systemd[1]: Mounting Debug File System... [ 8.201533] systemd[1]: Starting Create static device nodes in /dev... [ 8.210142] systemd[1]: Starting udev Coldplug all Devices... [ 8.218373] systemd[1]: Starting Journal Service... [ 8.230385] systemd[1]: Started Journal Service. [ 8.231554] systemd[1]: Mounting POSIX Message Queue File System... [ 8.243040] systemd[1]: Starting LVM2 metadata daemon socket. [ 8.250184] systemd[1]: Listening on LVM2 metadata daemon socket. [ 8.250260] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 8.261263] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 8.261335] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 8.274273] systemd[1]: Expecting device dev-disk-by\x2duuid-7096f098\x2daaba\x2d44e6\x2db8f0\x2dbc6243220e51.device... [ 8.281601] systemd[1]: Mounting Temporary Directory... [ 8.467248] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 8.474235] systemd[1]: Started Replay Read-Ahead Data. [ 8.475237] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE [ 8.483240] systemd[1]: Started Collect Read-Ahead Data. [ 8.484364] systemd[1]: Starting Load legacy module configuration... [ 8.497101] systemd[1]: Started File System Check on Root Device. [ 8.497245] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.536575] systemd[1]: Starting Apply Kernel Variables... [ 8.542272] systemd[1]: Starting Setup Virtual Console... [ 8.586175] systemd[1]: Started Load Kernel Modules. [ 8.590269] systemd[1]: Mounting FUSE Control File System... [ 8.595657] systemd[1]: Mounted Configuration File System. [ 8.627222] systemd[1]: Started Set Up Additional Binary Formats. [ 9.753109] EXT4-fs (sda2): re-mounted. Opts: (null) [ 10.034981] systemd-udevd[3086]: starting version 204 [ 11.718813] audit: type=1305 audit(1393618636.717:2): audit_pid=3095 old=0 auid=4294967295 ses=4294967295 res=1 [ 14.080178] systemd-udevd[3129]: renamed network interface p1p1 to enp2s0 [ 15.899198] Adding 2047996k swap on /dev/sda1. Priority:-1 extents:1 across:2047996k [ 22.411268] r8169 0000:02:00.0 enp2s0: link down [ 22.413637] r8169 0000:02:00.0 enp2s0: link down [ 24.093111] r8169 0000:02:00.0 enp2s0: link up [ 26.320083] NET: Registered protocol family 10 [ 26.421247] [drm:intel_crtc_cursor_set], cursor off [ 26.421257] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 26.421266] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 26.421273] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 26.421279] [drm:intel_crtc_cursor_set], cursor off [ 26.421286] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 26.421294] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 26.421300] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 26.891788] systemd[1]: PID file /run/sendmail.pid not readable (yet?) after start. [ 28.085064] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 28.085073] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 28.085080] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 29.428480] Bridge firewalling registered [ 31.035372] ip_tables: (C) 2000-2006 Netfilter Core Team [ 31.315758] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 32.715056] Ebtables v2.0 registered [ 32.763304] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 120.337760] [drm:i915_gem_open], [ 120.337816] [drm:intel_crtc_cursor_set], cursor off [ 120.337826] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 120.337836] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 120.337845] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 120.337853] [drm:intel_crtc_cursor_set], cursor off [ 120.337862] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 120.337872] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 120.337896] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 120.337931] [drm:i915_gem_open], [ 120.340167] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.340197] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.340228] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.340238] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.340250] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 120.340257] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 120.340264] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] [ 120.340284] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 120.340294] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa [ 120.340303] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 120.340326] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.340334] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.340343] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 120.340349] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 120.340354] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] [ 120.340367] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 120.340376] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa [ 120.340384] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 120.340398] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.340407] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.340430] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.340439] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.340448] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 120.340455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 120.340461] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 120.354047] [drm:intel_crt_detect], CRT not detected via hotplug [ 120.355052] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 120.355061] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 120.355069] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 120.355076] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 120.355380] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 120.355390] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 120.355397] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 120.355407] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 120.355431] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 120.355440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 120.355448] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 120.369110] [drm:intel_crt_detect], CRT not detected via hotplug [ 120.370139] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 120.370150] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 120.370157] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 120.370165] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 120.370468] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 120.370478] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 120.370485] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 120.370494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 120.370527] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.370541] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.370558] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 120.370568] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 120.370576] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 120.384118] [drm:intel_crt_detect], CRT not detected via hotplug [ 120.385125] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 120.385134] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 120.385145] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 120.385152] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 120.385456] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 120.385466] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 120.385472] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 120.385482] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 120.385503] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 120.385512] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 120.385521] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 120.399117] [drm:intel_crt_detect], CRT not detected via hotplug [ 120.400134] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 120.400147] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 120.400154] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 120.400163] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 120.400469] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 120.400479] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 120.400486] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 120.400496] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 120.400535] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.400548] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.400563] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 120.400573] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 120.400581] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] [ 120.400610] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 120.400624] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa [ 120.400639] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 120.400675] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.400689] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.400704] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 120.400712] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 120.400720] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] [ 120.400740] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 120.400753] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 45000 1024 1072 1104 1200 600 603 609 625 0x48 0xa [ 120.400768] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 120.400790] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.400804] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 120.400909] [drm:drm_mode_addfb], [FB:15] [ 120.400935] [drm:drm_mode_addfb], [FB:16] [ 120.400965] [drm:drm_mode_addfb], [FB:17] [ 121.269878] [drm:drm_mode_setcrtc], [CRTC:4] [ 121.269898] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] [ 121.269906] [drm:intel_crtc_set_config], [CRTC:4] [FB:15] #connectors=1 (x y) (0 0) [ 121.269915] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=1 [ 121.269921] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 121.269979] [drm:i9xx_update_plane], Writing base 00C00000 00000000 0 0 4096 [ 121.585120] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008 [ 121.585133] [drm:pineview_update_wm], Self-refresh is disabled [ 121.585142] [drm:check_encoder_state], [ENCODER:6:LVDS-6] [ 121.585148] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 121.585154] [drm:check_crtc_state], [CRTC:3] [ 121.585159] [drm:check_crtc_state], [CRTC:4] [ 121.585872] [drm:intel_calculate_wm], FIFO entries required for mode: 10 [ 121.585877] [drm:intel_calculate_wm], FIFO watermark level: 492 [ 121.585883] [drm:pineview_update_wm], DSPFW1 register is f6030f0f [ 121.585887] [drm:intel_calculate_wm], FIFO entries required for mode: 12 [ 121.585892] [drm:intel_calculate_wm], FIFO watermark level: 495 [ 121.585897] [drm:intel_calculate_wm], FIFO entries required for mode: 95 [ 121.585901] [drm:intel_calculate_wm], FIFO watermark level: 407 [ 121.585906] [drm:intel_calculate_wm], FIFO entries required for mode: 96 [ 121.585911] [drm:intel_calculate_wm], FIFO watermark level: 411 [ 121.585916] [drm:pineview_update_wm], DSPFW3 register is 3f3f0197 [ 121.585921] [drm:pineview_update_wm], Self-refresh is enabled [ 121.999126] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 121.999135] [drm:check_encoder_state], [ENCODER:6:LVDS-6] [ 121.999142] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 121.999148] [drm:check_crtc_state], [CRTC:3] [ 121.999153] [drm:check_crtc_state], [CRTC:4] [ 122.067323] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 122.067330] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 122.067335] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 122.067340] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 122.067346] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=1 [ 122.067349] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 122.067360] [drm:i9xx_update_plane], Writing base 00030000 00000000 0 0 4096 [ 122.085540] [drm:intel_crtc_cursor_set], cursor off [ 122.085549] [drm:intel_crtc_set_config], [CRTC:3] [NOFB] [ 122.085557] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 122.085564] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4] [ 122.085570] [drm:intel_crtc_cursor_set], cursor off [ 122.085577] [drm:intel_crtc_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [ 122.085585] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 122.085591] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]