[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-13 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.0-rc7-ore (romain@kima) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Mon Mar 17 10:15:22 CET 2014 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.14.0-rc7-ore root=/dev/mapper/carbonite-root ro quiet pcie_aspm=force nmi_watchdog=0 drm.debug=0xe [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a52e7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a52e8000-0x00000000baeedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000baeee000-0x00000000baf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Dell System XPS L322X/0PJHXN, BIOS A09 05/15/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23F800000 mask FFF800000 uncachable [ 0.000000] 8 base 23F600000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xa52e8 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a32000, 0x01a32fff] PGTABLE [ 0.000000] BRK [0x01a33000, 0x01a33fff] PGTABLE [ 0.000000] BRK [0x01a34000, 0x01a34fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23f400000-0x23f5fffff] [ 0.000000] [mem 0x23f400000-0x23f5fffff] page 2M [ 0.000000] BRK [0x01a35000, 0x01a35fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23f3fffff] [ 0.000000] [mem 0x23c000000-0x23f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01a36000, 0x01a36fff] PGTABLE [ 0.000000] BRK [0x01a37000, 0x01a37fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xa52e7fff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xa51fffff] page 2M [ 0.000000] [mem 0xa5200000-0xa52e7fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x36be2000-0x375e8fff] [ 0.000000] ACPI: RSDP 00000000000f0120 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000baffe170 00009C (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FACP 00000000bafe3000 00010C (v05 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: DSDT 00000000baff1000 00A56F (v02 DELL IVB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf7c000 000040 [ 0.000000] ACPI: SLIC 00000000baffd000 000176 (v01 DELL QA09 00000002 LOHR 00000001) [ 0.000000] ACPI: SSDT 00000000baffc000 000166 (v01 DELL PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000baff0000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: HPET 00000000bafed000 000038 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: APIC 00000000bafec000 000098 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: MCFG 00000000bafeb000 00003C (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: FPDT 00000000bafea000 000064 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: SSDT 00000000bafe9000 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafe8000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000bafe7000 00003E (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: UEFI 00000000bafe6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 00000000bafe5000 000055 (v03 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: UEFI 00000000bafe2000 00027E (v01 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: DBG2 00000000bafe0000 000070 (v00 DELL QA09 00000002 LOHR 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237200000-ffff88023ebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xa52e7fff] [ 0.000000] node 0: [mem 0x100000000-0x23f5fffff] [ 0.000000] On node 0 totalpages: 1984131 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10500 pages used for memmap [ 0.000000] DMA32 zone: 671975 pages, LIFO batch:31 [ 0.000000] Normal zone: 20440 pages used for memmap [ 0.000000] Normal zone: 1308160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa52e8000-0xbaeedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbaeee000-0xbaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbafff000-0xbf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff] [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023f200000 s80128 r8192 d22272 u262144 [ 0.000000] pcpu-alloc: s80128 r8192 d22272 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1953106 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.14.0-rc7-ore root=/dev/mapper/carbonite-root ro quiet pcie_aspm=force nmi_watchdog=0 drm.debug=0xe [ 0.000000] PCIe ASPM is forcibly enabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 7711396K/7936524K available (4122K kernel code, 534K rwdata, 1428K rodata, 888K init, 796K bss, 225128K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.162 MHz processor [ 0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.32 BogoMIPS (lpj=2494162) [ 0.000040] pid_max: default: 32768 minimum: 301 [ 0.000045] ACPI: Core revision 20131218 [ 0.005146] ACPI: All ACPI Tables successfully acquired [ 0.005492] Security Framework initialized [ 0.005496] Yama: becoming mindful. [ 0.005510] Mount-cache hash table entries: 256 [ 0.005665] Initializing cgroup subsys devices [ 0.005668] Initializing cgroup subsys freezer [ 0.005669] Initializing cgroup subsys net_cls [ 0.005671] Initializing cgroup subsys blkio [ 0.005697] CPU: Physical Processor ID: 0 [ 0.005698] CPU: Processor Core ID: 0 [ 0.005703] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.005703] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.006182] mce: CPU supports 7 MCE banks [ 0.006191] CPU0: Thermal monitoring handled by SMI [ 0.006200] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.006200] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.006200] tlb_flushall_shift: 2 [ 0.006336] Freeing SMP alternatives memory: 16K (ffffffff81965000 - ffffffff81969000) [ 0.007932] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.017946] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09) [ 0.017953] TSC deadline timer enabled [ 0.017962] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.017969] ... version: 3 [ 0.017970] ... bit width: 48 [ 0.017971] ... generic registers: 4 [ 0.017972] ... value mask: 0000ffffffffffff [ 0.017973] ... max period: 0000ffffffffffff [ 0.017974] ... fixed-purpose events: 3 [ 0.017975] ... event mask: 000000070000000f [ 0.018204] x86: Booting SMP configuration: [ 0.018206] .... node #0, CPUs: #1 [ 0.029834] CPU1: Thermal monitoring handled by SMI [ 0.032030] #2<6>[ 0.042988] CPU2 microcode updated early to revision 0x19, date = 2013-06-13 [ 0.043654] CPU2: Thermal monitoring handled by SMI [ 0.057464] #3 [ 0.057464] CPU3: Thermal monitoring handled by SMI [ 0.059597] x86: Booted up 1 node, 4 CPUs [ 0.059600] smpboot: Total of 4 processors activated (19953.29 BogoMIPS) [ 0.064139] devtmpfs: initialized [ 0.064313] PM: Registering ACPI NVS region [mem 0xbaeee000-0xbaf9efff] (724992 bytes) [ 0.064436] prandom: seed boundary self test passed [ 0.064944] prandom: 100 self tests passed [ 0.064947] pinctrl core: initialized pinctrl subsystem [ 0.064994] NET: Registered protocol family 16 [ 0.065067] cpuidle: using governor ladder [ 0.065068] cpuidle: using governor menu [ 0.065088] ACPI: bus type PCI registered [ 0.065140] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.065143] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.071605] PCI: Using configuration type 1 for base access [ 0.071719] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.071720] mtrr: probably your BIOS does not setup all CPUs. [ 0.071721] mtrr: corrected configuration. [ 0.072206] bio: create slab at 0 [ 0.072290] ACPI: Added _OSI(Module Device) [ 0.072291] ACPI: Added _OSI(Processor Device) [ 0.072293] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.072294] ACPI: Added _OSI(Processor Aggregator Device) [ 0.074970] ACPI: Executed 2 blocks of module-level executable AML code [ 0.082021] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.082442] ACPI: SSDT 00000000bae8c018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.082786] ACPI: Dynamic OEM Table Load: [ 0.082788] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.085270] ACPI: SSDT 00000000bae8da98 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.085644] ACPI: Dynamic OEM Table Load: [ 0.085646] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.089106] ACPI: SSDT 00000000bae8bd98 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.089442] ACPI: Dynamic OEM Table Load: [ 0.089444] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.095917] ACPI: Interpreter enabled [ 0.095926] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.095931] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.095945] ACPI: (supports S0 S3 S4 S5) [ 0.095947] ACPI: Using IOAPIC for interrupt routing [ 0.095980] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.096114] ACPI: No dock devices found. [ 0.102289] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.102295] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.102423] \_SB_.PCI0:_OSC invalid UUID [ 0.102424] _OSC request data:1 1f 0 [ 0.102429] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.103020] PCI host bridge to bus 0000:00 [ 0.103023] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.103025] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.103027] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.103029] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.103031] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff] [ 0.103040] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.103123] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.103135] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.103142] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.103147] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.103243] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.103268] pci 0000:00:14.0: reg 0x10: [mem 0xd0500000-0xd050ffff 64bit] [ 0.103347] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.103377] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.103422] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.103448] pci 0000:00:16.0: reg 0x10: [mem 0xd0515000-0xd051500f 64bit] [ 0.103530] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.103606] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.103630] pci 0000:00:1a.0: reg 0x10: [mem 0xd051a000-0xd051a3ff] [ 0.103729] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.103772] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.103815] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.103833] pci 0000:00:1b.0: reg 0x10: [mem 0xd0510000-0xd0513fff 64bit] [ 0.103917] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.103981] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.104077] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.104110] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.104161] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.104185] pci 0000:00:1d.0: reg 0x10: [mem 0xd0519000-0xd05193ff] [ 0.104283] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.104325] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.104367] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100 [ 0.104538] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.104559] pci 0000:00:1f.2: reg 0x10: [io 0x2098-0x209f] [ 0.104569] pci 0000:00:1f.2: reg 0x14: [io 0x20bc-0x20bf] [ 0.104578] pci 0000:00:1f.2: reg 0x18: [io 0x2090-0x2097] [ 0.104588] pci 0000:00:1f.2: reg 0x1c: [io 0x20b8-0x20bb] [ 0.104597] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] [ 0.104607] pci 0000:00:1f.2: reg 0x24: [mem 0xd0518000-0xd05187ff] [ 0.104659] pci 0000:00:1f.2: PME# supported from D3hot [ 0.104720] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.104737] pci 0000:00:1f.3: reg 0x10: [mem 0xd0514000-0xd05140ff 64bit] [ 0.104761] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.104913] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000 [ 0.104943] pci 0000:01:00.0: reg 0x10: [mem 0xd0400000-0xd047ffff 64bit] [ 0.105010] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.105104] pci 0000:01:00.0: supports D1 D2 [ 0.105106] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.105135] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.108113] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.108120] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd04fffff] [ 0.108139] pci_bus 0000:00: on NUMA node 0 [ 0.108301] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.108353] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.108403] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.108451] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.108499] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.108547] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.108596] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.108644] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.108760] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.108862] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.108934] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.108936] vgaarb: loaded [ 0.108937] vgaarb: bridge control possible 0000:00:02.0 [ 0.109010] PCI: Using ACPI for IRQ routing [ 0.110808] PCI: pci_cache_line_size set to 64 bytes [ 0.110848] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.110850] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.110852] e820: reserve RAM buffer [mem 0xa52e8000-0xa7ffffff] [ 0.110853] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff] [ 0.110977] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.110982] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.113010] Switched to clocksource hpet [ 0.114360] pnp: PnP ACPI init [ 0.114373] ACPI: bus type PNP registered [ 0.114401] pnp 00:00: [dma 4] [ 0.114423] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.114520] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.114550] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.114591] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.114593] system 00:03: [io 0x1000-0x1003] has been reserved [ 0.114595] system 00:03: [io 0x1004-0x1013] has been reserved [ 0.114597] system 00:03: [io 0xffff] has been reserved [ 0.114600] system 00:03: [io 0x0400-0x0453] could not be reserved [ 0.114602] system 00:03: [io 0x0458-0x047f] has been reserved [ 0.114604] system 00:03: [io 0x0500-0x057f] has been reserved [ 0.114606] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.114608] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.114635] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.114680] system 00:05: [io 0x0454-0x0457] has been reserved [ 0.114683] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.114731] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.114762] pnp 00:07: Plug and Play ACPI device, IDs DLL058b PNP0f13 (active) [ 0.114897] pnp 00:08: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref] [ 0.114920] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.114922] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.114924] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.114926] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.114928] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.114930] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.114932] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.114934] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.114936] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved [ 0.114938] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.114941] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.115137] pnp: PnP ACPI: found 9 devices [ 0.115139] ACPI: bus type PNP unregistered [ 0.121885] pci 0000:01:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.121904] pci 0000:00:1c.0: BAR 9: assigned [mem 0xbfa00000-0xbfafffff pref] [ 0.121907] pci 0000:01:00.0: BAR 6: assigned [mem 0xbfa00000-0xbfa0ffff pref] [ 0.121909] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.121915] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd04fffff] [ 0.121920] pci 0000:00:1c.0: bridge window [mem 0xbfa00000-0xbfafffff pref] [ 0.121928] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.121930] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.121932] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.121934] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] [ 0.121936] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd04fffff] [ 0.121938] pci_bus 0000:01: resource 2 [mem 0xbfa00000-0xbfafffff pref] [ 0.121968] NET: Registered protocol family 2 [ 0.122107] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.122218] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.122353] TCP: Hash tables configured (established 65536 bind 65536) [ 0.122371] TCP: reno registered [ 0.122374] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.122398] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.122470] NET: Registered protocol family 1 [ 0.122481] pci 0000:00:02.0: Boot video device [ 0.122908] PCI: CLS 64 bytes, default 64 [ 0.122946] Unpacking initramfs... [ 0.333605] Freeing initrd memory: 10268K (ffff880036be2000 - ffff8800375e9000) [ 0.333609] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.333612] software IO TLB [mem 0xa12e8000-0xa52e8000] (64MB) mapped at [ffff8800a12e8000-ffff8800a52e7fff] [ 0.333826] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.333859] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x19 [ 0.333867] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x19 [ 0.333877] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x19 [ 0.333885] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x19 [ 0.333932] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.334185] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.334206] Initialise system trusted keyring [ 0.348418] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.349812] VFS: Disk quotas dquot_6.5.2 [ 0.349855] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.349932] msgmni has been set to 15081 [ 0.350322] alg: No test for stdrng (krng) [ 0.350333] Key type asymmetric registered [ 0.350335] Asymmetric key parser 'x509' registered [ 0.350370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.350372] io scheduler noop registered [ 0.350373] io scheduler deadline registered [ 0.350400] io scheduler cfq registered (default) [ 0.350871] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 0.350873] crc32: self tests passed, processed 225944 bytes in 232292 nsec [ 0.351110] crc32c: CRC_LE_BITS = 64 [ 0.351111] crc32c: self tests passed, processed 225944 bytes in 116985 nsec [ 0.607121] crc32_combine: 8373 self tests passed [ 0.863276] crc32c_combine: 8373 self tests passed [ 0.863512] intel_idle: MWAIT substates: 0x21120 [ 0.863514] intel_idle: v0.4 model 0x3A [ 0.863515] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.863727] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.863731] ACPI: Power Button [PWRB] [ 0.863771] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.863774] ACPI: Sleep Button [SLPB] [ 0.863811] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.864113] ACPI: Lid Switch [LID0] [ 0.864161] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.864164] ACPI: Power Button [PWRF] [ 0.864196] GHES: HEST is not enabled! [ 0.864239] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.864708] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.867498] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.867505] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.867620] mousedev: PS/2 mouse device common for all mice [ 0.867667] rtc_cmos 00:04: RTC can wake from S4 [ 0.867803] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.867834] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.867844] Intel P-state driver initializing. [ 0.867854] Intel pstate controlling: cpu 0 [ 0.867886] Intel pstate controlling: cpu 1 [ 0.867908] Intel pstate controlling: cpu 2 [ 0.867924] Intel pstate controlling: cpu 3 [ 0.867988] drop_monitor: Initializing network drop monitor service [ 0.868026] TCP: cubic registered [ 0.868091] NET: Registered protocol family 10 [ 0.868194] mip6: Mobile IPv6 [ 0.868196] NET: Registered protocol family 17 [ 0.868200] Key type dns_resolver registered [ 0.868388] Loading compiled-in X.509 certificates [ 0.869076] Loaded X.509 cert 'Magrathea: Glacier signing key: 018a85b13db64c65317f65589ebd0b3f97c8f74c' [ 0.869082] registered taskstats version 1 [ 0.869345] rtc_cmos 00:04: setting system clock to 2014-03-17 16:17:01 UTC (1395073021) [ 0.869384] PM: Hibernation image not present or could not be loaded. [ 0.869794] Freeing unused kernel memory: 888K (ffffffff81887000 - ffffffff81965000) [ 0.869795] Write protecting the kernel read-only data: 8192k [ 0.873083] Freeing unused kernel memory: 2012K (ffff880001409000 - ffff880001600000) [ 0.874107] Freeing unused kernel memory: 620K (ffff880001765000 - ffff880001800000) [ 0.875090] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.918905] systemd-udevd[69]: starting version 204 [ 0.934352] Linux agpgart interface v0.103 [ 0.940215] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.940218] ACPI: Thermal Zone [TZ00] (66 C) [ 0.940449] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.940451] ACPI: Thermal Zone [TZ01] (66 C) [ 0.940669] ACPI: bus type USB registered [ 0.940692] usbcore: registered new interface driver usbfs [ 0.940702] usbcore: registered new interface driver hub [ 0.941589] usbcore: registered new device driver usb [ 0.941735] [drm] Initialized drm 1.1.0 20060810 [ 0.944836] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.944845] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.944944] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.944978] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X [ 0.945046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.945048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.945050] usb usb1: Product: xHCI Host Controller [ 0.945052] usb usb1: Manufacturer: Linux 3.14.0-rc7-ore xhci_hcd [ 0.945054] usb usb1: SerialNumber: 0000:00:14.0 [ 0.945775] hub 1-0:1.0: USB hub found [ 0.945786] hub 1-0:1.0: 4 ports detected [ 0.946184] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.946188] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.946227] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.946229] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.946231] usb usb2: Product: xHCI Host Controller [ 0.946233] usb usb2: Manufacturer: Linux 3.14.0-rc7-ore xhci_hcd [ 0.946235] usb usb2: SerialNumber: 0000:00:14.0 [ 0.946573] hub 2-0:1.0: USB hub found [ 0.946586] hub 2-0:1.0: 4 ports detected [ 0.950434] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.951956] ehci-pci: EHCI PCI platform driver [ 0.952092] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.952099] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.952114] ehci-pci 0000:00:1a.0: debug port 2 [ 0.956032] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.956054] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd051a000 [ 0.962036] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.962070] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.962073] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.962075] usb usb3: Product: EHCI Host Controller [ 0.962077] usb usb3: Manufacturer: Linux 3.14.0-rc7-ore ehci_hcd [ 0.962079] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.962432] hub 3-0:1.0: USB hub found [ 0.962439] hub 3-0:1.0: 2 ports detected [ 0.962661] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.962668] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.962682] ehci-pci 0000:00:1d.0: debug port 2 [ 0.966572] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.966722] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0519000 [ 0.966833] AVX version of gcm_enc/dec engaged. [ 0.972009] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.972044] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.972046] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.972048] usb usb4: Product: EHCI Host Controller [ 0.972050] usb usb4: Manufacturer: Linux 3.14.0-rc7-ore ehci_hcd [ 0.972052] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.972181] hub 4-0:1.0: USB hub found [ 0.972188] hub 4-0:1.0: 2 ports detected [ 0.972572] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0166 flags=is_mobile,need_gfx_hws,is_ivybridge,has_fbc,has_hotplug,has_llc, [ 0.972795] [drm:intel_detect_pch], Found PantherPoint PCH [ 0.973396] [drm] Memory usable by graphics device = 2048M [ 0.973398] [drm:i915_gem_gtt_init], GMADR size = 256M [ 0.973400] [drm:i915_gem_gtt_init], GTT stolen size = 64M [ 0.975161] SCSI subsystem initialized [ 0.980499] libata version 3.00 loaded. [ 0.980672] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.998798] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbaf78018 [ 0.998805] [drm:intel_opregion_setup], Public ACPI methods supported [ 0.998806] [drm:intel_opregion_setup], SWSCI supported [ 0.999816] alg: No test for crc32 (crc32-pclmul) [ 1.004044] [drm:swsci_setup], SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241 [ 1.004047] [drm:intel_opregion_setup], ASLE supported [ 1.004083] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 1.004091] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.004092] [drm] Driver supports precise vblank timestamp query. [ 1.004094] [drm:init_vbt_defaults], Set default to SSC at 120000 kHz [ 1.004096] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SNB/IVB-MOBILE d [ 1.004099] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.004100] [drm:parse_general_definitions], crt_ddc_bus_pin: 0 [ 1.004112] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.004115] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa [ 1.004116] [drm:parse_lfp_panel_data], VBT initial LVDS value 20033c [ 1.004118] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 21, level 255 [ 1.004119] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 1.004121] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.004122] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.004124] [drm:parse_mipi], No MIPI BDB found [ 1.004130] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 1.004134] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at bba00000 [ 1.004158] [drm:intel_print_wm_latency], Primary WM0 latency 12 (1.2 usec) [ 1.004160] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec) [ 1.004161] [drm:intel_print_wm_latency], Primary WM2 latency 16 (8.0 usec) [ 1.004162] [drm:intel_print_wm_latency], Primary WM3 latency 32 (16.0 usec) [ 1.004163] [drm:intel_print_wm_latency], Sprite WM0 latency 12 (1.2 usec) [ 1.004164] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec) [ 1.004165] [drm:intel_print_wm_latency], Sprite WM2 latency 16 (8.0 usec) [ 1.004166] [drm:intel_print_wm_latency], Sprite WM3 latency 32 (16.0 usec) [ 1.004167] [drm:intel_print_wm_latency], Cursor WM0 latency 12 (1.2 usec) [ 1.004168] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec) [ 1.004169] [drm:intel_print_wm_latency], Cursor WM2 latency 16 (8.0 usec) [ 1.004170] [drm:intel_print_wm_latency], Cursor WM3 latency 64 (32.0 usec) [ 1.004172] [drm:intel_modeset_init], 3 display pipes available. [ 1.004182] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.004488] [drm:intel_lvds_init], LVDS is not present in VBT [ 1.004515] [drm:intel_dp_init_connector], Adding eDP connector on port A [ 1.004532] [drm:intel_dp_i2c_init], i2c_init DPDDC-A [ 1.004535] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 1.004543] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.004714] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 1.004883] [drm:intel_dp_i2c_aux_ch], aux_i2c nack [ 1.004887] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 1.004894] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 1.004926] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 1.004928] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.004930] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.004932] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200 [ 1.004935] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on [ 1.004940] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.005215] [drm:intel_dp_get_dpcd], DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00 [ 1.005388] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x47d0000a, PP_OFF 0x1f407d0, PP_DIV 0x186906 [ 1.006207] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.028763] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2 [ 1.028770] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 1.028798] [drm:intel_panel_setup_backlight], backlight initialized, disabled, brightness 0/4882, sysfs interface registered [ 1.028836] [drm:intel_dp_init_connector], Adding DP connector on port C [ 1.028860] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 1.031323] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f [ 1.031329] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.033787] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f [ 1.033792] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.033813] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 0 has_ck505 0 [ 1.033817] [drm:ironlake_init_pch_refclk], Using SSC on panel [ 1.034021] [drm:ironlake_init_pch_refclk], Using SSC on eDP [ 1.034227] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000] [ 1.036504] [drm:init_status_page], render ring hws offset: 0x00000000 [ 1.038089] [drm:init_pipe_control], render ring pipe control offset: 0x00021000 [ 1.038093] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 1.038142] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 1.038198] [drm:create_default_context], Default HW context loaded [ 1.038199] [drm:i915_gem_context_init], HW context support initialized [ 1.038232] [drm:intel_crt_reset], pch crt adpa set to 0xf40000 [ 1.038237] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled [ 1.038239] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled [ 1.038241] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled [ 1.038246] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 0, on 0 [ 1.038252] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0, on 0 [ 1.038256] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe A [ 1.038259] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: enabled, pipe A [ 1.038263] [drm:intel_modeset_readout_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A [ 1.038267] [drm:intel_modeset_readout_hw_state], [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A [ 1.038269] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:eDP-1] hw state readout: enabled [ 1.038272] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled [ 1.038276] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-1] hw state readout: disabled [ 1.038279] [drm:intel_modeset_readout_hw_state], [CONNECTOR:23:DP-1] hw state readout: disabled [ 1.038282] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 1.038284] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.038285] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.038287] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.038290] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.038291] [drm:intel_dump_pipe_config], requested mode: [ 1.038294] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0 [ 1.038295] [drm:intel_dump_pipe_config], adjusted mode: [ 1.038298] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x9 [ 1.038301] [drm:intel_dump_crtc_timings], crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0x9 [ 1.038302] [drm:intel_dump_pipe_config], port clock: 270000 [ 1.038304] [drm:intel_dump_pipe_config], pipe src size: 720x400 [ 1.038306] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.038307] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.038309] [drm:intel_dump_pipe_config], ips: 0 [ 1.038310] [drm:intel_dump_pipe_config], double wide: 0 [ 1.038312] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B [ 1.038313] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.038315] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.038317] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.038319] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.038320] [drm:intel_dump_pipe_config], requested mode: [ 1.038323] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.038324] [drm:intel_dump_pipe_config], adjusted mode: [ 1.038326] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.038329] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.038330] [drm:intel_dump_pipe_config], port clock: 0 [ 1.038332] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 1.038333] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.038335] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.038336] [drm:intel_dump_pipe_config], ips: 0 [ 1.038338] [drm:intel_dump_pipe_config], double wide: 0 [ 1.038339] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C [ 1.038341] [drm:intel_dump_pipe_config], cpu_transcoder: C [ 1.038342] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.038344] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.038346] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.038347] [drm:intel_dump_pipe_config], requested mode: [ 1.038350] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.038351] [drm:intel_dump_pipe_config], adjusted mode: [ 1.038354] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.038356] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.038357] [drm:intel_dump_pipe_config], port clock: 0 [ 1.038359] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 1.038360] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.038362] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.038363] [drm:intel_dump_pipe_config], ips: 0 [ 1.038365] [drm:intel_dump_pipe_config], double wide: 0 [ 1.038368] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1] [ 1.038374] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 1.038377] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 1.038379] [drm:check_encoder_state], [ENCODER:20:TMDS-20] [ 1.038382] [drm:check_encoder_state], [ENCODER:22:TMDS-22] [ 1.038385] [drm:check_crtc_state], [CRTC:3] [ 1.038391] [drm:check_crtc_state], [CRTC:5] [ 1.038392] [drm:check_crtc_state], [CRTC:7] [ 1.038394] [drm:check_shared_dpll_state], PCH DPLL A [ 1.038399] [drm:check_shared_dpll_state], PCH DPLL B [ 1.038413] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] [ 1.038415] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1] [ 1.038421] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 1.038425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes : [ 1.038429] [drm:drm_mode_debug_printmodeline], Modeline 13:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9 [ 1.038431] [drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9 [ 1.038433] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 1.038435] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 1.038438] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 1.048154] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 1.048164] [drm:intel_crt_detect], CRT not detected via hotplug [ 1.099227] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [ 1.107170] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.107172] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 1.107176] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 1.107179] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] [ 1.107182] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-1] [ 1.107444] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.107447] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.107450] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] disconnected [ 1.107452] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-1] [ 1.107454] [drm:intel_dp_detect], [CONNECTOR:23:DP-1] [ 1.107458] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-1] disconnected [ 1.107460] [drm:drm_setup_crtcs], [ 1.107462] [drm:drm_enable_connectors], connector 12 enabled? yes [ 1.107464] [drm:drm_enable_connectors], connector 9 enabled? no [ 1.107465] [drm:drm_enable_connectors], connector 21 enabled? no [ 1.107466] [drm:drm_enable_connectors], connector 23 enabled? no [ 1.107468] [drm:drm_target_preferred], looking for cmdline mode on connector 12 [ 1.107470] [drm:drm_target_preferred], looking for preferred mode on connector 12 [ 1.107471] [drm:drm_target_preferred], found mode 1920x1080 [ 1.107473] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 1.107476] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3 [ 1.107480] [drm:intelfb_create], no BIOS fb, allocating a new one [ 1.107482] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000 [ 1.107490] [drm:i915_pages_create_for_stolen], offset=0x0, size=8294400 [ 1.109673] [drm:intelfb_create], allocated 1920x1080 fb: 0x00072000, bo ffff880037074000 [ 1.109770] fbcon: inteldrmfb (fb0) is primary device [ 1.110797] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0) [ 1.110799] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 1.110800] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 1.110802] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.110805] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9 [ 1.110806] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 [ 1.110807] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 1.110809] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.110811] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains [ 1.110814] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 1.110818] [drm:intel_dp_compute_config], DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.110819] [drm:intel_dp_compute_config], DP link bw required 333072 available 432000 [ 1.110821] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.110822] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 1.110823] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.110823] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.110825] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.110826] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.110827] [drm:intel_dump_pipe_config], requested mode: [ 1.110829] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9 [ 1.110829] [drm:intel_dump_pipe_config], adjusted mode: [ 1.110831] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9 [ 1.110833] [drm:intel_dump_crtc_timings], crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0x9 [ 1.110833] [drm:intel_dump_pipe_config], port clock: 270000 [ 1.110834] [drm:intel_dump_pipe_config], pipe src size: 1920x1080 [ 1.110835] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.110836] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.110837] [drm:intel_dump_pipe_config], ips: 0 [ 1.110837] [drm:intel_dump_pipe_config], double wide: 0 [ 1.110840] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 1.110844] [drm:ironlake_edp_backlight_off], [ 1.299519] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.311665] [drm:ironlake_edp_panel_off], Turn eDP power off [ 1.311669] [drm:ironlake_wait_panel_off], Wait for panel power off time [ 1.311674] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0008 [ 1.336420] tsc: Refined TSC clocksource calibration: 2494.332 MHz [ 1.469225] usb 1-2: New USB device found, idVendor=0b95, idProduct=1790 [ 1.469226] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.469227] usb 1-2: Product: AX88179 [ 1.469228] usb 1-2: Manufacturer: ASIX Elec. Corp. [ 1.469229] usb 1-2: SerialNumber: 0000249B08436F [ 1.573819] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.688651] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.688653] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.689041] hub 3-1:1.0: USB hub found [ 1.689204] hub 3-1:1.0: 6 ports detected [ 1.792067] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.906884] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.906886] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.907275] hub 4-1:1.0: USB hub found [ 1.907449] hub 4-1:1.0: 8 ports detected [ 1.982298] usb 3-1.5: new high-speed USB device number 3 using ehci-pci [ 2.093361] [drm:ironlake_wait_panel_status], Wait complete [ 2.103374] [drm:intel_dp_link_down], [ 2.155426] [drm:g4x_wait_for_vblank], vblank wait timed out [ 2.206693] [drm:intel_update_fbc], no output, disabling [ 2.206702] [drm:ivb_modeset_global_resources], disabling fdi C rx [ 2.206739] [drm:ironlake_update_plane], Writing base 00072000 00000000 0 0 7680 [ 2.206742] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1920x1080] [ 2.206744] [drm:ironlake_set_pll_cpu_edp], eDP PLL enable for clock 270000 [ 2.207246] [drm:ironlake_edp_pll_on], [ 2.259551] [drm:g4x_wait_for_vblank], vblank wait timed out [ 2.311609] [drm:g4x_wait_for_vblank], vblank wait timed out [ 2.311614] [drm:intel_update_fbc], disabled per chip default [ 2.312152] [drm:intel_dp_set_signal_levels], Using signal levels 09000000 [ 2.312626] [drm:intel_dp_set_signal_levels], Using signal levels 0c000000 [ 2.313089] [drm:intel_dp_set_signal_levels], Using signal levels 0e000000 [ 2.313553] [drm:intel_dp_set_signal_levels], Using signal levels 09000000 [ 2.314021] [drm:intel_dp_set_signal_levels], Using signal levels 0e000000 [ 2.314483] [drm:intel_dp_set_signal_levels], Using signal levels 09000000 [ 2.314953] [drm:intel_dp_set_signal_levels], Using signal levels 0e000000 [ 2.315414] [drm:intel_dp_set_signal_levels], Using signal levels 09000000 [ 2.315888] [drm:intel_dp_set_signal_levels], Using signal levels 0e000000 [ 2.316351] [drm:intel_dp_set_signal_levels], Using signal levels 09000000 [ 2.316832] [drm:intel_dp_set_signal_levels], Using signal levels 0e000000 [ 2.317292] [drm:intel_dp_start_link_train] *ERROR* too many full retries, give up [ 2.317292] [drm:ironlake_edp_panel_on], Turn eDP power on [ 2.317295] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle [ 2.317298] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008 [ 2.317300] [drm:ironlake_wait_panel_status], Wait complete [ 2.317303] [drm:ironlake_wait_panel_on], Wait for panel power on [ 2.317305] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b [ 2.337632] Switched to clocksource tsc [ 2.361418] usb 3-1.5: New USB device found, idVendor=1bcf, idProduct=288f [ 2.361420] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.361422] usb 3-1.5: Product: Laptop_Integrated_Webcam_1.3M [ 2.361423] usb 3-1.5: Manufacturer: CN01RH7172487272D81NA00 [ 2.525866] [drm:ironlake_wait_panel_status], Wait complete [ 2.525872] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off [ 2.525890] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 2.526671] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful [ 2.526819] [drm:ironlake_edp_backlight_on], [ 2.528776] [drm:intel_panel_enable_backlight], pipe A [ 2.528781] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4882 [ 2.544793] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1] [ 2.544799] [drm:check_encoder_state], [ENCODER:10:DAC-10] [ 2.544801] [drm:check_encoder_state], [ENCODER:11:TMDS-11] [ 2.544803] [drm:check_encoder_state], [ENCODER:20:TMDS-20] [ 2.544805] [drm:check_encoder_state], [ENCODER:22:TMDS-22] [ 2.544808] [drm:check_crtc_state], [CRTC:3] [ 2.544813] [drm:check_crtc_state], [CRTC:5] [ 2.544814] [drm:check_crtc_state], [CRTC:7] [ 2.544815] [drm:check_shared_dpll_state], PCH DPLL A [ 2.544820] [drm:check_shared_dpll_state], PCH DPLL B [ 2.544825] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 2.544827] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.544829] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 2.544830] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 2.544832] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 2.544833] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 2.544860] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0) [ 2.544861] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.544863] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 2.550930] Console: switching to colour frame buffer device 240x67 [ 2.550934] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0) [ 2.550935] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.550936] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 2.557703] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.557705] i915 0000:00:02.0: registered panic notifier [ 2.572403] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.579943] acpi device:2e: registered as cooling_device0 [ 2.580025] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.580046] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.580122] ahci 0000:00:1f.2: version 3.0 [ 2.580226] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 2.580262] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode [ 2.580264] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 2.580801] scsi0 : ahci [ 2.580936] scsi1 : ahci [ 2.581014] scsi2 : ahci [ 2.581093] scsi3 : ahci [ 2.581164] scsi4 : ahci [ 2.581232] scsi5 : ahci [ 2.581278] ata1: SATA max UDMA/133 abar m2048@0xd0518000 port 0xd0518100 irq 42 [ 2.581280] ata2: DUMMY [ 2.581281] ata3: DUMMY [ 2.581282] ata4: DUMMY [ 2.581283] ata5: DUMMY [ 2.581284] ata6: DUMMY [ 2.653041] usb 4-1.5: new full-speed USB device number 3 using ehci-pci [ 2.720463] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 2.724039] [drm:gen6_enable_rps], Overclocking supported. Max: 1200MHz, Overclock max: 1200MHz [ 2.740291] usb 4-1.5: string descriptor 0 read error: -22 [ 2.740330] usb 4-1.5: New USB device found, idVendor=0cf3, idProduct=3004 [ 2.740332] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.886241] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.886940] ata1.00: ATA-8: SAMSUNG SSD PM830 mSATA 256GB, CXM13D1Q, max UDMA/133 [ 2.886944] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.887508] ata1.00: configured for UDMA/133 [ 2.887757] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 CXM1 PQ: 0 ANSI: 5 [ 2.892573] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.892641] sd 0:0:0:0: [sda] Write Protect is off [ 2.892644] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.892662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.893949] sda: sda1 sda2 sda3 [ 2.894147] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.896021] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.923559] device-mapper: uevent: version 1.0.3 [ 2.923652] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.925846] random: lvm urandom read with 30 bits of entropy available [ 6.049622] bio: create slab at 1 [ 6.207640] bio: create slab at 0 [ 6.208795] random: nonblocking pool is initialized [ 6.274047] raid6: sse2x1 5191 MB/s [ 6.291066] raid6: sse2x2 6453 MB/s [ 6.308092] raid6: sse2x4 7578 MB/s [ 6.308094] raid6: using algorithm sse2x4 (7578 MB/s) [ 6.308096] raid6: using ssse3x2 recovery algorithm [ 6.309462] xor: automatically using best checksumming function: [ 6.319097] avx : 21720.000 MB/sec [ 6.328338] bio: create slab at 2 [ 6.328779] Btrfs loaded [ 6.363853] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 6.508129] systemd-udevd[464]: starting version 204 [ 6.557398] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 6.580792] ACPI: Battery Slot [BAT0] (battery present) [ 6.589635] wmi: Mapper loaded [ 6.595677] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258) [ 6.595685] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.595689] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 6.595693] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.595694] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 6.595698] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.595700] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 6.619938] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6.621659] Bluetooth: Core ver 2.18 [ 6.621671] NET: Registered protocol family 31 [ 6.621672] Bluetooth: HCI device and connection manager initialized [ 6.621678] Bluetooth: HCI socket layer initialized [ 6.621680] Bluetooth: L2CAP socket layer initialized [ 6.621687] Bluetooth: SCO socket layer initialized [ 6.624628] cfg80211: Calling CRDA to update world regulatory domain [ 6.634668] usbcore: registered new interface driver btusb [ 6.639964] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258) [ 6.639972] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.641824] usbcore: registered new interface driver ath3k [ 6.648281] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 6.654120] Linux video capture interface: v2.00 [ 6.662003] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 6.670397] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 6.674896] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 6.678645] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (1bcf:288f) [ 6.685997] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 6.695600] ath: phy0: ASPM enabled: 0x42 [ 6.695604] ath: EEPROM regdomain: 0x6c [ 6.695605] ath: EEPROM indicates we should expect a direct regpair map [ 6.695608] ath: Country alpha2 being used: 00 [ 6.695609] ath: Regpair used: 0x6c [ 6.709570] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 6.709785] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90015000000, irq=16 [ 6.718315] input: Dell WMI hotkeys as /devices/virtual/input/input12 [ 6.759293] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input13 [ 6.759363] usbcore: registered new interface driver uvcvideo [ 6.759365] USB Video Class driver (1.1.1) [ 6.766685] ACPI: AC Adapter [ADP0] (on-line) [ 6.959698] ax88179_178a 1-2:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-2, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:08:43:6f [ 6.959740] usbcore: registered new interface driver ax88179_178a [ 7.530679] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 7.563673] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 7.605344] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio1/input/input7 [ 7.707302] fuse init (API version 7.22) [ 7.714906] loop: module loaded [ 7.807364] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 7.813493] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 7.904185] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.911028] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 7.923056] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.102653] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0) [ 9.102656] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 9.102658] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 9.232711] NET: Registered protocol family 15 [ 9.260409] Initializing XFRM netlink socket [ 9.306852] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.309171] device eth0 entered promiscuous mode [ 9.315816] device eth0 left promiscuous mode [ 9.455666] [drm:i915_gem_open], [ 9.455762] [drm:intel_crtc_cursor_set], cursor off [ 9.455769] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0) [ 9.455776] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 9.455783] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 9.455788] [drm:intel_crtc_cursor_set], cursor off [ 9.455791] [drm:intel_crtc_set_config], [CRTC:5] [NOFB] [ 9.455796] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 9.455800] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 9.455804] [drm:intel_crtc_cursor_set], cursor off [ 9.455807] [drm:intel_crtc_set_config], [CRTC:7] [NOFB] [ 9.455811] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 9.455815] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 9.475462] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0) [ 9.475471] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 9.475477] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 9.488565] [drm:i915_gem_open], [ 9.488583] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[4] [ 9.491430] [drm:drm_mode_addfb], [FB:26] [ 9.491493] [drm:drm_mode_addfb], [FB:26] [ 9.492029] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[4] [ 9.492037] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[4] [ 9.492104] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 9.492111] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 9.492457] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 9.492465] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 9.492496] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 9.492502] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 9.492530] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 9.492535] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 9.552548] [drm:drm_mode_addfb], [FB:26] [ 9.552556] [drm:drm_mode_setcrtc], [CRTC:3] [ 9.552560] [drm:drm_mode_setcrtc], [CONNECTOR:12:eDP-1] [ 9.552563] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0) [ 9.552567] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1 [ 9.552569] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3] [ 9.556521] [drm:ironlake_update_plane], Writing base 0087B000 00000000 0 0 7680 [ 9.656447] zram: Created 1 device(s) ... [ 9.668961] Adding 15450396k swap on /dev/zram0. Priority:-1 extents:1 across:15450396k SS [ 9.686014] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.283792] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 10.283798] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] [ 10.283801] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1] [ 10.283812] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 10.283816] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes : [ 10.283820] [drm:drm_mode_debug_printmodeline], Modeline 13:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9 [ 10.283823] [drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9 [ 10.283827] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 10.284029] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 10.284033] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 10.284035] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 10.284039] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 10.284040] [drm:intel_crt_detect], CRT not detected via hotplug [ 10.291657] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 10.291661] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 10.291665] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 10.291682] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 10.291683] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] [ 10.291685] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-1] [ 10.291842] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 10.291844] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 10.291846] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] disconnected [ 10.291851] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 10.291853] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-1] [ 10.291855] [drm:intel_dp_detect], [CONNECTOR:23:DP-1] [ 10.291859] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-1] disconnected [ 10.292128] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 10.292131] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] [ 10.292134] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1] [ 10.292143] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 10.292146] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes : [ 10.292150] [drm:drm_mode_debug_printmodeline], Modeline 13:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9 [ 10.292153] [drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9 [ 10.292155] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 10.292280] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 10.292282] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 10.292284] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 10.292288] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 10.292290] [drm:intel_crt_detect], CRT not detected via hotplug [ 10.299665] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 10.299669] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 10.299672] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 10.299686] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 10.299688] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] [ 10.299689] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-1] [ 10.299902] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 10.299904] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 10.299905] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] disconnected [ 10.299909] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 10.299911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-1] [ 10.299913] [drm:intel_dp_detect], [CONNECTOR:23:DP-1] [ 10.299916] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-1] disconnected [ 10.313980] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 10.313986] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] [ 10.313989] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1] [ 10.313999] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 10.314003] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes : [ 10.314007] [drm:drm_mode_debug_printmodeline], Modeline 13:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9 [ 10.314010] [drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9 [ 10.314013] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 10.314142] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 10.314145] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 10.314147] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 10.314151] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 10.314152] [drm:intel_crt_detect], CRT not detected via hotplug [ 10.321693] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 10.321696] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 10.321699] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 10.321722] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 10.321725] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] [ 10.321726] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-1] [ 10.321898] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 10.321900] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 10.321901] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] disconnected [ 10.321904] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 10.321906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-1] [ 10.321908] [drm:intel_dp_detect], [CONNECTOR:23:DP-1] [ 10.321911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-1] disconnected [ 10.322140] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 10.322143] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] [ 10.322145] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1] [ 10.322154] [drm:drm_edid_to_eld], ELD: no CEA Extension found [ 10.322158] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes : [ 10.322161] [drm:drm_mode_debug_printmodeline], Modeline 13:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9 [ 10.322163] [drm:drm_mode_debug_printmodeline], Modeline 14:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9 [ 10.322166] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 10.322287] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 10.322289] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 10.322291] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 10.322295] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 10.322297] [drm:intel_crt_detect], CRT not detected via hotplug [ 10.329698] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 10.329702] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 10.329704] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 10.329718] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 10.329720] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] [ 10.329721] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-1] [ 10.329895] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 10.329896] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 10.329897] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] disconnected [ 10.329901] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 10.329902] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-1] [ 10.329904] [drm:intel_dp_detect], [CONNECTOR:23:DP-1] [ 10.329907] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-1] disconnected [ 10.558862] [drm:intel_dp_detect], [CONNECTOR:23:DP-1] [ 10.558897] [drm:intel_hdmi_detect], [CONNECTOR:21:HDMI-A-1] [ 10.559079] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 10.559086] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 10.559145] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1 [ 10.559153] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 10.559158] [drm:intel_crt_detect], CRT not detected via hotplug [ 10.566973] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 10.566977] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 10.567013] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1] [ 11.078654] [drm:intel_crtc_cursor_set], cursor off