[ 0.475495] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.475503] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.475509] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.475517] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.475524] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.475531] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.475538] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff] [ 0.475545] pci_bus 0000:00: root bus resource [mem 0x80000000-0x907ffffe] [ 0.475562] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.475729] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.475747] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff] [ 0.475761] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 0.475774] pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057] [ 0.475947] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.475971] pci 0000:00:13.0: reg 0x10: [io 0x2048-0x204f] [ 0.475983] pci 0000:00:13.0: reg 0x14: [io 0x205c-0x205f] [ 0.475994] pci 0000:00:13.0: reg 0x18: [io 0x2040-0x2047] [ 0.476006] pci 0000:00:13.0: reg 0x1c: [io 0x2058-0x205b] [ 0.476017] pci 0000:00:13.0: reg 0x20: [io 0x2020-0x203f] [ 0.476029] pci 0000:00:13.0: reg 0x24: [mem 0x90717000-0x907177ff] [ 0.476081] pci 0000:00:13.0: PME# supported from D3hot [ 0.476217] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.476240] pci 0000:00:14.0: reg 0x10: [mem 0x90700000-0x9070ffff 64bit] [ 0.476305] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.476394] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.476487] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.476517] pci 0000:00:1a.0: reg 0x10: [mem 0x90600000-0x906fffff] [ 0.476533] pci 0000:00:1a.0: reg 0x14: [mem 0x90500000-0x905fffff] [ 0.476647] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.476786] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.476813] pci 0000:00:1b.0: reg 0x10: [mem 0x90710000-0x90713fff 64bit] [ 0.476890] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.477024] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.477093] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.477160] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.477239] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.477307] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.477374] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.477453] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.477521] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.477588] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.477672] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.477740] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.477807] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.477892] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.478097] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.478136] pci 0000:00:1f.3: reg 0x10: [mem 0x90714000-0x9071401f] [ 0.478211] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f] [ 0.478510] pci 0000:01:00.0: [8086:107d] type 00 class 0x020000 [ 0.478539] pci 0000:01:00.0: reg 0x10: [mem 0x90420000-0x9043ffff] [ 0.478559] pci 0000:01:00.0: reg 0x14: [mem 0x90400000-0x9041ffff] [ 0.478579] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f] [ 0.478743] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.478882] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.478956] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.478978] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.478987] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.478993] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x904fffff] [ 0.479070] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.479080] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.479154] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.479163] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.479239] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.479249] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.479255] pci 0000:00:1c.3: bridge window [mem 0x90c00000-0x90dfffff] [ 0.479263] pci 0000:00:1c.3: bridge window [mem 0x90e00000-0x90ffffff 64bit pref] [ 0.480082] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.480203] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.480322] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.480440] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.480559] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.480684] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.480804] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.480922] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.482955] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.483031] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.483118] initcall acpi_init+0x0/0x273 returned 0 after 335937 usecs [ 0.483124] calling pnp_init+0x0/0xc @ 1 [ 0.483151] initcall pnp_init+0x0/0xc returned 0 after 0 usecs [ 0.483156] calling misc_init+0x0/0xad @ 1 [ 0.483181] initcall misc_init+0x0/0xad returned 0 after 0 usecs [ 0.483185] calling vga_arb_device_init+0x0/0xe2 @ 1 [ 0.483257] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.483269] vgaarb: loaded [ 0.483273] vgaarb: bridge control possible 0000:00:02.0 [ 0.483281] initcall vga_arb_device_init+0x0/0xe2 returned 0 after 0 usecs [ 0.483287] calling cn_init+0x0/0xb5 @ 1 [ 0.483310] initcall cn_init+0x0/0xb5 returned 0 after 0 usecs [ 0.483314] calling dma_buf_init+0x0/0x74 @ 1 [ 0.483324] initcall dma_buf_init+0x0/0x74 returned 0 after 0 usecs [ 0.483328] calling init_scsi+0x0/0x87 @ 1 [ 0.483458] SCSI subsystem initialized [ 0.483466] initcall init_scsi+0x0/0x87 returned 0 after 0 usecs [ 0.483471] calling ata_init+0x0/0x317 @ 1 [ 0.483609] libata version 3.00 loaded. [ 0.483616] initcall ata_init+0x0/0x317 returned 0 after 0 usecs [ 0.483622] calling phy_init+0x0/0x34 @ 1 [ 0.483696] initcall phy_init+0x0/0x34 returned 0 after 976 usecs [ 0.483700] calling init_pcmcia_cs+0x0/0x3b @ 1 [ 0.483717] initcall init_pcmcia_cs+0x0/0x3b returned 0 after 0 usecs [ 0.483721] calling usb_init+0x0/0x163 @ 1 [ 0.483730] ACPI: bus type USB registered [ 0.483798] usbcore: registered new interface driver usbfs [ 0.483830] usbcore: registered new interface driver hub [ 0.483904] usbcore: registered new device driver usb [ 0.483913] initcall usb_init+0x0/0x163 returned 0 after 0 usecs [ 0.483917] calling serio_init+0x0/0x27 @ 1 [ 0.483943] initcall serio_init+0x0/0x27 returned 0 after 0 usecs [ 0.483948] calling input_init+0x0/0x101 @ 1 [ 0.483968] initcall input_init+0x0/0x101 returned 0 after 0 usecs [ 0.483972] calling rtc_init+0x0/0x58 @ 1 [ 0.483989] initcall rtc_init+0x0/0x58 returned 0 after 0 usecs [ 0.483993] calling pps_init+0x0/0xad @ 1 [ 0.484008] pps_core: LinuxPPS API ver. 1 registered [ 0.484014] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.484022] initcall pps_init+0x0/0xad returned 0 after 0 usecs [ 0.484026] calling ptp_init+0x0/0x9a @ 1 [ 0.484041] PTP clock support registered [ 0.484048] initcall ptp_init+0x0/0x9a returned 0 after 0 usecs [ 0.484052] calling power_supply_class_init+0x0/0x3d @ 1 [ 0.484068] initcall power_supply_class_init+0x0/0x3d returned 0 after 0 usecs [ 0.484072] calling hwmon_init+0x0/0xe7 @ 1 [ 0.484091] initcall hwmon_init+0x0/0xe7 returned 0 after 0 usecs [ 0.484096] calling watchdog_init+0x0/0x64 @ 1 [ 0.484113] initcall watchdog_init+0x0/0x64 returned 0 after 0 usecs [ 0.484117] calling md_init+0x0/0x13d @ 1 [ 0.484178] initcall md_init+0x0/0x13d returned 0 after 0 usecs [ 0.484183] calling leds_init+0x0/0x39 @ 1 [ 0.484200] initcall leds_init+0x0/0x39 returned 0 after 0 usecs [ 0.484205] calling efisubsys_init+0x0/0x138 @ 1 [ 0.484209] initcall efisubsys_init+0x0/0x138 returned 0 after 0 usecs [ 0.484214] calling pci_subsys_init+0x0/0x43 @ 1 [ 0.484216] PCI: Using ACPI for IRQ routing [ 0.485747] PCI: pci_cache_line_size set to 64 bytes [ 0.485797] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.485801] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.485805] e820: reserve RAM buffer [mem 0x78adf000-0x7bffffff] [ 0.485808] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.485815] initcall pci_subsys_init+0x0/0x43 returned 0 after 1953 usecs [ 0.485819] calling proto_init+0x0/0xc @ 1 [ 0.485827] initcall proto_init+0x0/0xc returned 0 after 0 usecs [ 0.485831] calling net_dev_init+0x0/0x1be @ 1 [ 0.486017] initcall net_dev_init+0x0/0x1be returned 0 after 0 usecs [ 0.486022] calling neigh_init+0x0/0x7d @ 1 [ 0.486027] initcall neigh_init+0x0/0x7d returned 0 after 0 usecs [ 0.486031] calling fib_rules_init+0x0/0xa5 @ 1 [ 0.486036] initcall fib_rules_init+0x0/0xa5 returned 0 after 0 usecs [ 0.486041] calling pktsched_init+0x0/0x100 @ 1 [ 0.486049] initcall pktsched_init+0x0/0x100 returned 0 after 0 usecs [ 0.486054] calling tc_filter_init+0x0/0x52 @ 1 [ 0.486058] initcall tc_filter_init+0x0/0x52 returned 0 after 0 usecs [ 0.486062] calling tc_action_init+0x0/0x52 @ 1 [ 0.486067] initcall tc_action_init+0x0/0x52 returned 0 after 0 usecs [ 0.486071] calling genl_init+0x0/0x91 @ 1 [ 0.486083] initcall genl_init+0x0/0x91 returned 0 after 0 usecs [ 0.486088] calling cipso_v4_init+0x0/0x62 @ 1 [ 0.486092] initcall cipso_v4_init+0x0/0x62 returned 0 after 0 usecs [ 0.486097] calling wireless_nlevent_init+0x0/0xc @ 1 [ 0.486101] initcall wireless_nlevent_init+0x0/0xc returned 0 after 0 usecs [ 0.486105] calling netlbl_init+0x0/0x80 @ 1 [ 0.486107] NetLabel: Initializing [ 0.486112] NetLabel: domain hash size = 128 [ 0.486116] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.486140] NetLabel: unlabeled traffic allowed by default [ 0.486148] initcall netlbl_init+0x0/0x80 returned 0 after 0 usecs [ 0.486276] calling nmi_warning_debugfs+0x0/0x24 @ 1 [ 0.486286] initcall nmi_warning_debugfs+0x0/0x24 returned 0 after 0 usecs [ 0.486291] calling hpet_late_init+0x0/0xe6 @ 1 [ 0.486299] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.486309] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.488395] initcall hpet_late_init+0x0/0xe6 returned 0 after 1953 usecs [ 0.488400] calling init_amd_nbs+0x0/0xa8 @ 1 [ 0.488410] initcall init_amd_nbs+0x0/0xa8 returned 0 after 0 usecs [ 0.488415] calling clocksource_done_booting+0x0/0x3d @ 1 [ 0.488457] Switched to clocksource hpet [ 0.488467] initcall clocksource_done_booting+0x0/0x3d returned 0 after 12 usecs [ 0.488473] calling init_pipe_fs+0x0/0x42 @ 1 [ 0.488499] initcall init_pipe_fs+0x0/0x42 returned 0 after 19 usecs [ 0.488503] calling eventpoll_init+0x0/0xd7 @ 1 [ 0.488516] initcall eventpoll_init+0x0/0xd7 returned 0 after 6 usecs [ 0.488519] calling anon_inode_init+0x0/0x55 @ 1 [ 0.488534] initcall anon_inode_init+0x0/0x55 returned 0 after 9 usecs [ 0.488538] calling proc_cmdline_init+0x0/0x1f @ 1 [ 0.488547] initcall proc_cmdline_init+0x0/0x1f returned 0 after 3 usecs [ 0.488551] calling proc_consoles_init+0x0/0x21 @ 1 [ 0.488559] initcall proc_consoles_init+0x0/0x21 returned 0 after 2 usecs [ 0.488563] calling proc_cpuinfo_init+0x0/0x1f @ 1 [ 0.488570] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 2 usecs [ 0.488574] calling proc_devices_init+0x0/0x1f @ 1 [ 0.488581] initcall proc_devices_init+0x0/0x1f returned 0 after 2 usecs [ 0.488585] calling proc_interrupts_init+0x0/0x1f @ 1 [ 0.488592] initcall proc_interrupts_init+0x0/0x1f returned 0 after 2 usecs [ 0.488596] calling proc_loadavg_init+0x0/0x1f @ 1 [ 0.488603] initcall proc_loadavg_init+0x0/0x1f returned 0 after 1 usecs [ 0.488607] calling proc_meminfo_init+0x0/0x1f @ 1 [ 0.488614] initcall proc_meminfo_init+0x0/0x1f returned 0 after 2 usecs [ 0.488618] calling proc_stat_init+0x0/0x1f @ 1 [ 0.488625] initcall proc_stat_init+0x0/0x1f returned 0 after 2 usecs [ 0.488629] calling proc_uptime_init+0x0/0x20 @ 1 [ 0.488636] initcall proc_uptime_init+0x0/0x20 returned 0 after 2 usecs [ 0.488640] calling proc_version_init+0x0/0x1f @ 1 [ 0.488647] initcall proc_version_init+0x0/0x1f returned 0 after 2 usecs [ 0.488651] calling proc_softirqs_init+0x0/0x1f @ 1 [ 0.488658] initcall proc_softirqs_init+0x0/0x1f returned 0 after 2 usecs [ 0.488662] calling proc_kcore_init+0x0/0xa8 @ 1 [ 0.488674] initcall proc_kcore_init+0x0/0xa8 returned 0 after 6 usecs [ 0.488742] calling vmcore_init+0x0/0x573 @ 1 [ 0.488749] initcall vmcore_init+0x0/0x573 returned 0 after 1 usecs [ 0.488753] calling proc_kmsg_init+0x0/0x23 @ 1 [ 0.488781] initcall proc_kmsg_init+0x0/0x23 returned 0 after 21 usecs [ 0.488785] calling proc_page_init+0x0/0x3f @ 1 [ 0.488794] initcall proc_page_init+0x0/0x3f returned 0 after 3 usecs [ 0.488798] calling init_ramfs_fs+0x0/0x4d @ 1 [ 0.488804] initcall init_ramfs_fs+0x0/0x4d returned 0 after 1 usecs [ 0.488808] calling blk_scsi_ioctl_init+0x0/0x2c0 @ 1 [ 0.488815] initcall blk_scsi_ioctl_init+0x0/0x2c0 returned 0 after 1 usecs [ 0.488819] calling acpi_event_init+0x0/0x3a @ 1 [ 0.488834] initcall acpi_event_init+0x0/0x3a returned 0 after 9 usecs [ 0.488838] calling pnp_system_init+0x0/0xc @ 1 [ 0.488867] initcall pnp_system_init+0x0/0xc returned 0 after 22 usecs [ 0.488871] calling pnpacpi_init+0x0/0x8b @ 1 [ 0.488874] pnp: PnP ACPI init [ 0.488896] ACPI: bus type PNP registered [ 0.488987] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.489102] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.489296] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.489340] pnp 00:03: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.0 BAR 7 [io 0x1000-0x1fff] [ 0.489407] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.489416] system 00:03: [io 0x0400-0x047f] has been reserved [ 0.489423] system 00:03: [io 0x0500-0x05fe] has been reserved [ 0.489431] system 00:03: [io 0x0600-0x061f] has been reserved [ 0.489440] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.489613] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.489774] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.489889] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.490373] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.490383] system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.490392] system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.490399] system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.490407] system 00:07: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.490415] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.490422] system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.490430] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.490438] system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.490446] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.492398] pnp 00:08: Plug and Play ACPI device, IDs INT33bd (active) [ 0.492445] pnp: PnP ACPI: found 9 devices [ 0.492452] ACPI: bus type PNP unregistered [ 0.492462] initcall pnpacpi_init+0x0/0x8b returned 0 after 3492 usecs [ 0.492478] calling chr_dev_init+0x0/0xbf @ 1 [ 0.496183] initcall chr_dev_init+0x0/0xbf returned 0 after 3601 usecs [ 0.496189] calling firmware_class_init+0x0/0xe7 @ 1 [ 0.496214] initcall firmware_class_init+0x0/0xe7 returned 0 after 17 usecs [ 0.496219] calling init_pcmcia_bus+0x0/0x5b @ 1 [ 0.496252] initcall init_pcmcia_bus+0x0/0x5b returned 0 after 26 usecs [ 0.496256] calling thermal_init+0x0/0x95 @ 1 [ 0.496289] initcall thermal_init+0x0/0x95 returned 0 after 26 usecs [ 0.496294] calling cpufreq_gov_performance_init+0x0/0xc @ 1 [ 0.496301] initcall cpufreq_gov_performance_init+0x0/0xc returned 0 after 1 usecs [ 0.496305] calling cpufreq_gov_userspace_init+0x0/0xc @ 1 [ 0.496311] initcall cpufreq_gov_userspace_init+0x0/0xc returned 0 after 1 usecs [ 0.496315] calling init_acpi_pm_clocksource+0x0/0xe0 @ 1 [ 0.500897] initcall init_acpi_pm_clocksource+0x0/0xe0 returned 0 after 4458 usecs [ 0.500902] calling ssb_modinit+0x0/0x58 @ 1 [ 0.500971] initcall ssb_modinit+0x0/0x58 returned 0 after 61 usecs [ 0.500976] calling pcibios_assign_resources+0x0/0xb3 @ 1 [ 0.500998] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.501009] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.501014] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.501025] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.501030] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 [ 0.501048] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.501052] pci 0000:00:1c.1: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.501057] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.501062] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.501067] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.501081] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000) [ 0.501096] pci 0000:00:1c.1: BAR 8: can't assign mem (size 0x200000) [ 0.501109] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000) [ 0.501120] pci 0000:00:1c.2: BAR 8: can't assign mem (size 0x200000) [ 0.501133] pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x200000) [ 0.501144] pci 0000:00:1c.2: BAR 8: can't assign mem (size 0x200000) [ 0.501158] pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x200000) [ 0.501169] pci 0000:00:1c.1: BAR 8: can't assign mem (size 0x200000) [ 0.501182] pci 0000:00:1c.1: BAR 9: can't assign mem pref (size 0x200000) [ 0.501195] pci 0000:00:1c.0: BAR 9: can't assign mem pref (size 0x200000) [ 0.501203] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.501211] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.501221] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x904fffff] [ 0.501233] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.501241] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.501255] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.501262] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.501276] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.501283] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.501293] pci 0000:00:1c.3: bridge window [mem 0x90c00000-0x90dfffff] [ 0.501302] pci 0000:00:1c.3: bridge window [mem 0x90e00000-0x90ffffff 64bit pref] [ 0.501314] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 0.501318] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 0.501322] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 0.501326] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.501331] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 0.501335] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 0.501339] pci_bus 0000:00: resource 10 [mem 0x90c00000-0x90ffffff] [ 0.501343] pci_bus 0000:00: resource 11 [mem 0x80000000-0x907ffffe] [ 0.501348] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.501352] pci_bus 0000:01: resource 1 [mem 0x90400000-0x904fffff] [ 0.501356] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.501361] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.501365] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff] [ 0.501369] pci_bus 0000:04: resource 1 [mem 0x90c00000-0x90dfffff] [ 0.501373] pci_bus 0000:04: resource 2 [mem 0x90e00000-0x90ffffff 64bit pref] [ 0.501380] initcall pcibios_assign_resources+0x0/0xb3 returned 0 after 387 usecs [ 0.501385] calling sysctl_core_init+0x0/0x28 @ 1 [ 0.501409] initcall sysctl_core_init+0x0/0x28 returned 0 after 18 usecs [ 0.501414] calling inet_init+0x0/0x291 @ 1 [ 0.501442] NET: Registered protocol family 2 [ 0.501731] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.501816] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.501901] TCP: Hash tables configured (established 16384 bind 16384) [ 0.501954] TCP: reno registered [ 0.501965] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.501990] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.502082] initcall inet_init+0x0/0x291 returned 0 after 640 usecs [ 0.502088] calling ipv4_offload_init+0x0/0x5e @ 1 [ 0.502095] initcall ipv4_offload_init+0x0/0x5e returned 0 after 1 usecs [ 0.502099] calling af_unix_init+0x0/0x4b @ 1 [ 0.502104] NET: Registered protocol family 1 [ 0.502119] initcall af_unix_init+0x0/0x4b returned 0 after 14 usecs [ 0.502123] calling ipv6_offload_init+0x0/0x7c @ 1 [ 0.502129] initcall ipv6_offload_init+0x0/0x7c returned 0 after 1 usecs [ 0.502133] calling init_sunrpc+0x0/0x5f @ 1 [ 0.502275] RPC: Registered named UNIX socket transport module. [ 0.502283] RPC: Registered udp transport module. [ 0.502288] RPC: Registered tcp transport module. [ 0.502292] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.502301] initcall init_sunrpc+0x0/0x5f returned 0 after 157 usecs [ 0.502307] calling pci_apply_final_quirks+0x0/0xf1 @ 1 [ 0.502325] pci 0000:00:02.0: Boot video device [ 0.502742] PCI: CLS 64 bytes, default 64 [ 0.502749] initcall pci_apply_final_quirks+0x0/0xf1 returned 0 after 424 usecs [ 0.502755] calling populate_rootfs+0x0/0xd5 @ 1 [ 1.189313] initcall populate_rootfs+0x0/0xd5 returned 0 after 669146 usecs [ 1.189322] calling pci_iommu_init+0x0/0x37 @ 1 [ 1.189329] initcall pci_iommu_init+0x0/0x37 returned 0 after 1 usecs [ 1.189334] calling calgary_fixup_tce_spaces+0x0/0xef @ 1 [ 1.189340] initcall calgary_fixup_tce_spaces+0x0/0xef returned -19 after 1 usecs [ 1.189468] calling register_kernel_offset_dumper+0x0/0x18 @ 1 [ 1.189475] initcall register_kernel_offset_dumper+0x0/0x18 returned 0 after 1 usecs [ 1.189479] calling i8259A_init_ops+0x0/0x21 @ 1 [ 1.189485] initcall i8259A_init_ops+0x0/0x21 returned 0 after 1 usecs [ 1.189489] calling vsyscall_init+0x0/0x2e @ 1 [ 1.189502] initcall vsyscall_init+0x0/0x2e returned 0 after 7 usecs [ 1.189506] calling sbf_init+0x0/0xed @ 1 [ 1.189512] initcall sbf_init+0x0/0xed returned 0 after 1 usecs [ 1.189516] calling init_tsc_clocksource+0x0/0xb6 @ 1 [ 1.189526] initcall init_tsc_clocksource+0x0/0xb6 returned 0 after 4 usecs [ 1.189530] calling add_rtc_cmos+0x0/0xb0 @ 1 [ 1.189537] initcall add_rtc_cmos+0x0/0xb0 returned 0 after 2 usecs [ 1.189542] calling i8237A_init_ops+0x0/0x11 @ 1 [ 1.189555] initcall i8237A_init_ops+0x0/0x11 returned 0 after 7 usecs [ 1.189559] calling cache_sysfs_init+0x0/0x6f @ 1 [ 1.189673] initcall cache_sysfs_init+0x0/0x6f returned 0 after 104 usecs [ 1.189678] calling amd_uncore_init+0x0/0x137 @ 1 [ 1.189685] initcall amd_uncore_init+0x0/0x137 returned -19 after 1 usecs [ 1.189689] calling intel_uncore_init+0x0/0x418 @ 1 [ 1.189701] initcall intel_uncore_init+0x0/0x418 returned 0 after 6 usecs [ 1.189705] calling rapl_pmu_init+0x0/0x199 @ 1 [ 1.189712] initcall rapl_pmu_init+0x0/0x199 returned 0 after 1 usecs [ 1.189716] calling thermal_throttle_init_device+0x0/0x7c @ 1 [ 1.189723] initcall thermal_throttle_init_device+0x0/0x7c returned 0 after 1 usecs [ 1.189727] calling amd_ibs_init+0x0/0x1bb @ 1 [ 1.189734] initcall amd_ibs_init+0x0/0x1bb returned -19 after 1 usecs [ 1.189737] calling msr_init+0x0/0x11e @ 1 [ 1.189935] initcall msr_init+0x0/0x11e returned 0 after 186 usecs [ 1.189939] calling cpuid_init+0x0/0x11e @ 1 [ 1.190064] initcall cpuid_init+0x0/0x11e returned 0 after 115 usecs [ 1.190069] calling ioapic_init_ops+0x0/0x13 @ 1 [ 1.190076] initcall ioapic_init_ops+0x0/0x13 returned 0 after 1 usecs [ 1.190080] calling add_pcspkr+0x0/0x3f @ 1 [ 1.190124] initcall add_pcspkr+0x0/0x3f returned 0 after 37 usecs [ 1.190129] calling sysfb_init+0x0/0x6f @ 1 [ 1.190169] initcall sysfb_init+0x0/0x6f returned 0 after 33 usecs [ 1.190174] calling audit_classes_init+0x0/0xac @ 1 [ 1.190184] initcall audit_classes_init+0x0/0xac returned 0 after 4 usecs [ 1.190188] calling ia32_binfmt_init+0x0/0x11 @ 1 [ 1.190201] initcall ia32_binfmt_init+0x0/0x11 returned 0 after 7 usecs [ 1.190206] calling proc_execdomains_init+0x0/0x1f @ 1 [ 1.190218] initcall proc_execdomains_init+0x0/0x1f returned 0 after 6 usecs [ 1.190222] calling ioresources_init+0x0/0x39 @ 1 [ 1.190231] initcall ioresources_init+0x0/0x39 returned 0 after 3 usecs [ 1.190236] calling init_posix_timers+0x0/0x236 @ 1 [ 1.190257] initcall init_posix_timers+0x0/0x236 returned 0 after 15 usecs [ 1.190261] calling init_posix_cpu_timers+0x0/0xc1 @ 1 [ 1.190267] initcall init_posix_cpu_timers+0x0/0xc1 returned 0 after 1 usecs [ 1.190271] calling snapshot_device_init+0x0/0xc @ 1 [ 1.190334] initcall snapshot_device_init+0x0/0xc returned 0 after 54 usecs [ 1.190338] calling irq_pm_init_ops+0x0/0x11 @ 1 [ 1.190345] initcall irq_pm_init_ops+0x0/0x11 returned 0 after 1 usecs [ 1.190348] calling timekeeping_init_ops+0x0/0x11 @ 1 [ 1.190355] initcall timekeeping_init_ops+0x0/0x11 returned 0 after 1 usecs [ 1.190359] calling init_clocksource_sysfs+0x0/0x67 @ 1 [ 1.190436] initcall init_clocksource_sysfs+0x0/0x67 returned 0 after 69 usecs [ 1.190441] calling init_timer_list_procfs+0x0/0x2b @ 1 [ 1.190449] initcall init_timer_list_procfs+0x0/0x2b returned 0 after 3 usecs [ 1.190454] calling alarmtimer_init+0x0/0x193 @ 1 [ 1.190526] initcall alarmtimer_init+0x0/0x193 returned 0 after 63 usecs [ 1.190530] calling clockevents_init_sysfs+0x0/0xc5 @ 1 [ 1.190717] initcall clockevents_init_sysfs+0x0/0xc5 returned 0 after 175 usecs [ 1.190722] calling futex_init+0x0/0xda @ 1 [ 1.190743] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.190777] initcall futex_init+0x0/0xda returned 0 after 47 usecs [ 1.190781] calling proc_dma_init+0x0/0x1f @ 1 [ 1.190791] initcall proc_dma_init+0x0/0x1f returned 0 after 4 usecs [ 1.190795] calling proc_modules_init+0x0/0x20 @ 1 [ 1.190803] initcall proc_modules_init+0x0/0x20 returned 0 after 2 usecs [ 1.190807] calling kallsyms_init+0x0/0x22 @ 1 [ 1.190814] initcall kallsyms_init+0x0/0x22 returned 0 after 2 usecs [ 1.190818] calling pid_namespaces_init+0x0/0x2a @ 1 [ 1.190849] initcall pid_namespaces_init+0x0/0x2a returned 0 after 8 usecs [ 1.190854] calling ikconfig_init+0x0/0x3b @ 1 [ 1.190863] initcall ikconfig_init+0x0/0x3b returned 0 after 3 usecs [ 1.190867] calling audit_init+0x0/0xfd @ 1 [ 1.190870] audit: initializing netlink subsys (disabled) [ 1.190892] audit: type=2000 audit(1399498208.157:1): initialized [ 1.190902] initcall audit_init+0x0/0xfd returned 0 after 29 usecs [ 1.190906] calling audit_watch_init+0x0/0x37 @ 1 [ 1.190912] initcall audit_watch_init+0x0/0x37 returned 0 after 1 usecs [ 1.190916] calling audit_tree_init+0x0/0x54 @ 1 [ 1.190923] initcall audit_tree_init+0x0/0x54 returned 0 after 1 usecs [ 1.190927] calling init_kprobes+0x0/0x148 @ 1 [ 1.230613] initcall init_kprobes+0x0/0x148 returned 0 after 38673 usecs [ 1.230618] calling utsname_sysctl_init+0x0/0x11 @ 1 [ 1.230634] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 10 usecs [ 1.230638] calling irq_work_init_cpu_notifier+0x0/0x26 @ 1 [ 1.230648] initcall irq_work_init_cpu_notifier+0x0/0x26 returned 0 after 3 usecs [ 1.230652] calling perf_event_sysfs_init+0x0/0x8c @ 1 [ 1.230808] initcall perf_event_sysfs_init+0x0/0x8c returned 0 after 146 usecs [ 1.230814] calling init_per_zone_wmark_min+0x0/0x9b @ 1 [ 1.230860] initcall init_per_zone_wmark_min+0x0/0x9b returned 0 after 38 usecs [ 1.230864] calling kswapd_init+0x0/0x69 @ 1 [ 1.230932] initcall kswapd_init+0x0/0x69 returned 0 after 60 usecs [ 1.230937] calling setup_vmstat+0x0/0xdf @ 1 [ 1.230955] initcall setup_vmstat+0x0/0xdf returned 0 after 12 usecs [ 1.230960] calling mm_compute_batch_init+0x0/0x4d @ 1 [ 1.230966] initcall mm_compute_batch_init+0x0/0x4d returned 0 after 1 usecs [ 1.230970] calling slab_proc_init+0x0/0x22 @ 1 [ 1.230978] initcall slab_proc_init+0x0/0x22 returned 0 after 2 usecs [ 1.230982] calling workingset_init+0x0/0x44 @ 1 [ 1.230989] initcall workingset_init+0x0/0x44 returned 0 after 1 usecs [ 1.230993] calling proc_vmalloc_init+0x0/0x22 @ 1 [ 1.231001] initcall proc_vmalloc_init+0x0/0x22 returned 0 after 2 usecs [ 1.231006] calling procswaps_init+0x0/0x21 @ 1 [ 1.231014] initcall procswaps_init+0x0/0x21 returned 0 after 2 usecs [ 1.231018] calling hugetlb_init+0x0/0x49c @ 1 [ 1.231024] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.231063] initcall hugetlb_init+0x0/0x49c returned 0 after 37 usecs [ 1.231068] calling slab_sysfs_init+0x0/0xef @ 1 [ 1.234177] initcall slab_sysfs_init+0x0/0xef returned 0 after 3021 usecs [ 1.234185] calling fcntl_init+0x0/0x27 @ 1 [ 1.234198] initcall fcntl_init+0x0/0x27 returned 0 after 7 usecs [ 1.234202] calling proc_filesystems_init+0x0/0x1f @ 1 [ 1.234213] initcall proc_filesystems_init+0x0/0x1f returned 0 after 6 usecs [ 1.234217] calling dio_init+0x0/0x2a @ 1 [ 1.234226] initcall dio_init+0x0/0x2a returned 0 after 4 usecs [ 1.234230] calling fsnotify_mark_init+0x0/0x3d @ 1 [ 1.234276] initcall fsnotify_mark_init+0x0/0x3d returned 0 after 37 usecs [ 1.234282] calling dnotify_init+0x0/0x78 @ 1 [ 1.234362] initcall dnotify_init+0x0/0x78 returned 0 after 72 usecs [ 1.234367] calling inotify_user_setup+0x0/0x48 @ 1 [ 1.234376] initcall inotify_user_setup+0x0/0x48 returned 0 after 3 usecs [ 1.234379] calling aio_setup+0x0/0x7a @ 1 [ 1.234405] initcall aio_setup+0x0/0x7a returned 0 after 19 usecs [ 1.234409] calling proc_locks_init+0x0/0x1f @ 1 [ 1.234418] initcall proc_locks_init+0x0/0x1f returned 0 after 3 usecs [ 1.234421] calling init_sys32_ioctl+0x0/0x25 @ 1 [ 1.234540] initcall init_sys32_ioctl+0x0/0x25 returned 0 after 110 usecs [ 1.234544] calling init_mbcache+0x0/0x11 @ 1 [ 1.234550] initcall init_mbcache+0x0/0x11 returned 0 after 1 usecs [ 1.234553] calling dquot_init+0x0/0x10f @ 1 [ 1.234556] VFS: Disk quotas dquot_6.5.2 [ 1.234637] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.234647] initcall dquot_init+0x0/0x10f returned 0 after 86 usecs [ 1.234651] calling init_v2_quota_format+0x0/0x23 @ 1 [ 1.234657] initcall init_v2_quota_format+0x0/0x23 returned 0 after 1 usecs [ 1.234661] calling quota_init+0x0/0x2e @ 1 [ 1.234680] initcall quota_init+0x0/0x2e returned 0 after 13 usecs [ 1.234685] calling init_devpts_fs+0x0/0x5e @ 1 [ 1.234712] initcall init_devpts_fs+0x0/0x5e returned 0 after 20 usecs [ 1.234716] calling init_reiserfs_fs+0x0/0x68 @ 1 [ 1.234779] initcall init_reiserfs_fs+0x0/0x68 returned 0 after 54 usecs [ 1.234784] calling init_ext3_fs+0x0/0x7e @ 1 [ 1.234849] initcall init_ext3_fs+0x0/0x7e returned 0 after 58 usecs [ 1.234854] calling init_ext2_fs+0x0/0x7e @ 1 [ 1.234922] initcall init_ext2_fs+0x0/0x7e returned 0 after 60 usecs [ 1.234926] calling ext4_init_fs+0x0/0x20e @ 1 [ 1.235215] initcall ext4_init_fs+0x0/0x20e returned 0 after 275 usecs [ 1.235220] calling journal_init+0x0/0xa3 @ 1 [ 1.235443] initcall journal_init+0x0/0xa3 returned 0 after 211 usecs [ 1.235448] calling journal_init+0x0/0x109 @ 1 [ 1.235526] initcall journal_init+0x0/0x109 returned 0 after 69 usecs [ 1.235530] calling init_hugetlbfs_fs+0x0/0x160 @ 1 [ 1.235620] initcall init_hugetlbfs_fs+0x0/0x160 returned 0 after 81 usecs [ 1.235625] calling init_fat_fs+0x0/0x45 @ 1 [ 1.235731] initcall init_fat_fs+0x0/0x45 returned 0 after 97 usecs [ 1.235736] calling init_vfat_fs+0x0/0xc @ 1 [ 1.235743] initcall init_vfat_fs+0x0/0xc returned 0 after 2 usecs [ 1.235747] calling init_iso9660_fs+0x0/0x80 @ 1 [ 1.235818] initcall init_iso9660_fs+0x0/0x80 returned 0 after 63 usecs [ 1.235823] calling init_nfs_fs+0x0/0x136 @ 1 [ 1.236322] initcall init_nfs_fs+0x0/0x136 returned 0 after 478 usecs [ 1.236327] calling init_nfs_v2+0x0/0x11 @ 1 [ 1.236334] initcall init_nfs_v2+0x0/0x11 returned 0 after 1 usecs [ 1.236337] calling init_nfs_v3+0x0/0x11 @ 1 [ 1.236344] initcall init_nfs_v3+0x0/0x11 returned 0 after 1 usecs [ 1.236348] calling init_nfs_v4+0x0/0x3a @ 1 [ 1.236351] NFS: Registering the id_resolver key type [ 1.236390] Key type id_resolver registered [ 1.236395] Key type id_legacy registered [ 1.236407] initcall init_nfs_v4+0x0/0x3a returned 0 after 51 usecs [ 1.236411] calling init_nfsd+0x0/0x106 @ 1 [ 1.236414] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.236640] initcall init_nfsd+0x0/0x106 returned 0 after 216 usecs [ 1.236644] calling init_nlm+0x0/0x40 @ 1 [ 1.236659] initcall init_nlm+0x0/0x40 returned 0 after 8 usecs [ 1.236663] calling init_nls_cp437+0x0/0xe @ 1 [ 1.236669] initcall init_nls_cp437+0x0/0xe returned 0 after 1 usecs [ 1.236673] calling init_nls_ascii+0x0/0xe @ 1 [ 1.236679] initcall init_nls_ascii+0x0/0xe returned 0 after 0 usecs [ 1.236683] calling init_autofs4_fs+0x0/0x2b @ 1 [ 1.236767] initcall init_autofs4_fs+0x0/0x2b returned 0 after 75 usecs [ 1.236772] calling fuse_init+0x0/0x140 @ 1 [ 1.236775] fuse init (API version 7.23) [ 1.237020] initcall fuse_init+0x0/0x140 returned 0 after 235 usecs [ 1.237026] calling ipc_init+0x0/0x20 @ 1 [ 1.237035] msgmni has been set to 3746 [ 1.237048] initcall ipc_init+0x0/0x20 returned 0 after 15 usecs [ 1.237052] calling ipc_sysctl_init+0x0/0x11 @ 1 [ 1.237068] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 10 usecs [ 1.237072] calling init_mqueue_fs+0x0/0x99 @ 1 [ 1.237162] initcall init_mqueue_fs+0x0/0x99 returned 0 after 80 usecs [ 1.237167] calling key_proc_init+0x0/0x56 @ 1 [ 1.237177] initcall key_proc_init+0x0/0x56 returned 0 after 4 usecs [ 1.237181] calling crypto_algapi_init+0x0/0xa @ 1 [ 1.237189] initcall crypto_algapi_init+0x0/0xa returned 0 after 2 usecs [ 1.237193] calling chainiv_module_init+0x0/0xc @ 1 [ 1.237200] initcall chainiv_module_init+0x0/0xc returned 0 after 1 usecs [ 1.237204] calling eseqiv_module_init+0x0/0xc @ 1 [ 1.237210] initcall eseqiv_module_init+0x0/0xc returned 0 after 1 usecs [ 1.237214] calling hmac_module_init+0x0/0xc @ 1 [ 1.237220] initcall hmac_module_init+0x0/0xc returned 0 after 1 usecs [ 1.237224] calling md5_mod_init+0x0/0xc @ 1 [ 1.237287] initcall md5_mod_init+0x0/0xc returned 0 after 53 usecs [ 1.237292] calling sha1_generic_mod_init+0x0/0xc @ 1 [ 1.237346] initcall sha1_generic_mod_init+0x0/0xc returned 0 after 45 usecs [ 1.237351] calling aes_init+0x0/0xc @ 1 [ 1.237404] initcall aes_init+0x0/0xc returned 0 after 45 usecs [ 1.237409] calling crc32c_mod_init+0x0/0xc @ 1 [ 1.237463] initcall crc32c_mod_init+0x0/0xc returned 0 after 45 usecs [ 1.237468] calling krng_mod_init+0x0/0xc @ 1 [ 1.237521] initcall krng_mod_init+0x0/0xc returned 0 after 44 usecs [ 1.237526] calling proc_genhd_init+0x0/0x39 @ 1 [ 1.237538] initcall proc_genhd_init+0x0/0x39 returned 0 after 5 usecs [ 1.237542] calling bsg_init+0x0/0x16c @ 1 [ 1.237627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.237638] initcall bsg_init+0x0/0x16c returned 0 after 87 usecs [ 1.237642] calling noop_init+0x0/0xc @ 1 [ 1.237647] io scheduler noop registered [ 1.237654] initcall noop_init+0x0/0xc returned 0 after 6 usecs [ 1.237658] calling deadline_init+0x0/0xc @ 1 [ 1.237661] io scheduler deadline registered [ 1.237668] initcall deadline_init+0x0/0xc returned 0 after 5 usecs [ 1.237672] calling cfq_init+0x0/0x7f @ 1 [ 1.237738] io scheduler cfq registered (default) [ 1.237747] initcall cfq_init+0x0/0x7f returned 0 after 67 usecs [ 1.237752] calling libcrc32c_mod_init+0x0/0x27 @ 1 [ 1.237761] initcall libcrc32c_mod_init+0x0/0x27 returned 0 after 3 usecs [ 1.237765] calling percpu_counter_startup+0x0/0x16 @ 1 [ 1.237774] initcall percpu_counter_startup+0x0/0x16 returned 0 after 3 usecs [ 1.237778] calling phy_core_init+0x0/0x4a @ 1 [ 1.237797] initcall phy_core_init+0x0/0x4a returned 0 after 12 usecs [ 1.237802] calling pci_proc_init+0x0/0x60 @ 1 [ 1.237843] initcall pci_proc_init+0x0/0x60 returned 0 after 34 usecs [ 1.237847] calling pcie_portdrv_init+0x0/0x6c @ 1 [ 1.238528] initcall pcie_portdrv_init+0x0/0x6c returned 0 after 654 usecs [ 1.238534] calling aer_service_init+0x0/0x1e @ 1 [ 1.238558] initcall aer_service_init+0x0/0x1e returned 0 after 16 usecs [ 1.238563] calling pcie_pme_service_init+0x0/0xc @ 1 [ 1.238592] initcall pcie_pme_service_init+0x0/0xc returned 0 after 22 usecs [ 1.238597] calling pci_hotplug_init+0x0/0x1a @ 1 [ 1.238600] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.238610] initcall pci_hotplug_init+0x0/0x1a returned 0 after 7 usecs [ 1.238615] calling fb_console_init+0x0/0x10b @ 1 [ 1.238664] initcall fb_console_init+0x0/0x10b returned 0 after 42 usecs [ 1.238669] calling genericbl_driver_init+0x0/0xe @ 1 [ 1.238696] initcall genericbl_driver_init+0x0/0xe returned 0 after 19 usecs [ 1.238701] calling vesafb_driver_init+0x0/0xe @ 1 [ 1.238722] initcall vesafb_driver_init+0x0/0xe returned 0 after 14 usecs [ 1.238727] calling efifb_driver_init+0x0/0xe @ 1 [ 1.238749] efifb: probing for efifb [ 1.239677] efifb: framebuffer at 0x80000000, mapped to 0xffffc90004480000, using 8100k, total 8100k [ 1.239686] efifb: mode is 1920x1080x32, linelength=7680, pages=2032 [ 1.239691] efifb: scrolling: redraw [ 1.239696] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.255394] Console: switching to colour frame buffer device 240x67 [ 1.269897] fb0: EFI VGA frame buffer device [ 1.269971] initcall efifb_driver_init+0x0/0xe returned 0 after 30444 usecs [ 1.269987] calling acpi_reserve_resources+0x0/0xea @ 1 [ 1.269997] initcall acpi_reserve_resources+0x0/0xea returned 0 after 3 usecs [ 1.270001] calling acpi_fan_driver_init+0x0/0xc @ 1 [ 1.270157] ACPI: Fan [FAN0] (off) [ 1.270222] initcall acpi_fan_driver_init+0x0/0xc returned 0 after 209 usecs [ 1.270227] calling acpi_processor_driver_init+0x0/0x42 @ 1 [ 1.272223] Monitor-Mwait will be used to enter C-1 state [ 1.272232] Monitor-Mwait will be used to enter C-2 state [ 1.272259] ACPI: acpi_idle registered with cpuidle [ 1.272915] initcall acpi_processor_driver_init+0x0/0x42 returned 0 after 2611 usecs [ 1.272920] calling acpi_thermal_init+0x0/0x7e @ 1 [ 1.273633] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.273710] ACPI: Thermal Zone [TZ01] (27 C) [ 1.273786] initcall acpi_thermal_init+0x0/0x7e returned 0 after 836 usecs [ 1.273791] calling pty_init+0x0/0x20a @ 1 [ 1.273876] initcall pty_init+0x0/0x20a returned 0 after 76 usecs [ 1.273881] calling serial8250_init+0x0/0x13c @ 1 [ 1.273885] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.294308] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.294901] initcall serial8250_init+0x0/0x13c returned 0 after 20480 usecs [ 1.294907] calling serial_pci_driver_init+0x0/0x15 @ 1 [ 1.294964] initcall serial_pci_driver_init+0x0/0x15 returned 0 after 49 usecs [ 1.294969] calling hpet_init+0x0/0x62 @ 1 [ 1.295174] initcall hpet_init+0x0/0x62 returned 0 after 193 usecs [ 1.295179] calling nvram_init+0x0/0x78 @ 1 [ 1.295248] Non-volatile memory driver v1.3 [ 1.295307] initcall nvram_init+0x0/0x78 returned 0 after 118 usecs [ 1.295311] calling mod_init+0x0/0x49 @ 1 [ 1.295317] initcall mod_init+0x0/0x49 returned -19 after 0 usecs [ 1.295321] calling agp_init+0x0/0x26 @ 1 [ 1.295324] Linux agpgart interface v0.103 [ 1.295378] initcall agp_init+0x0/0x26 returned 0 after 50 usecs [ 1.295382] calling agp_amd64_mod_init+0x0/0x1b @ 1 [ 1.295439] initcall agp_amd64_mod_init+0x0/0x1b returned -19 after 49 usecs [ 1.295444] calling agp_intel_init+0x0/0x24 @ 1 [ 1.295476] initcall agp_intel_init+0x0/0x24 returned 0 after 25 usecs [ 1.295480] calling agp_sis_init+0x0/0x24 @ 1 [ 1.295508] initcall agp_sis_init+0x0/0x24 returned 0 after 21 usecs [ 1.295512] calling agp_via_init+0x0/0x24 @ 1 [ 1.295541] initcall agp_via_init+0x0/0x24 returned 0 after 22 usecs [ 1.295545] calling cn_proc_init+0x0/0x33 @ 1 [ 1.295552] initcall cn_proc_init+0x0/0x33 returned 0 after 2 usecs [ 1.295558] calling topology_sysfs_init+0x0/0x6e @ 1 [ 1.295585] initcall topology_sysfs_init+0x0/0x6e returned 0 after 21 usecs [ 1.295590] calling brd_init+0x0/0x1bf @ 1 [ 1.297936] brd: module loaded [ 1.297991] initcall brd_init+0x0/0x1bf returned 0 after 2332 usecs [ 1.297997] calling mac_hid_init+0x0/0x1f @ 1 [ 1.298011] initcall mac_hid_init+0x0/0x1f returned 0 after 7 usecs [ 1.298015] calling scsi_tgt_init+0x0/0x83 @ 1 [ 1.298206] initcall scsi_tgt_init+0x0/0x83 returned 0 after 180 usecs [ 1.298211] calling raid_init+0x0/0xc @ 1 [ 1.298230] initcall raid_init+0x0/0xc returned 0 after 12 usecs [ 1.298235] calling spi_transport_init+0x0/0x74 @ 1 [ 1.298273] initcall spi_transport_init+0x0/0x74 returned 0 after 31 usecs [ 1.298277] calling fc_transport_init+0x0/0x8f @ 1 [ 1.298320] initcall fc_transport_init+0x0/0x8f returned 0 after 36 usecs [ 1.298325] calling iscsi_transport_init+0x0/0x1b4 @ 1 [ 1.298328] Loading iSCSI transport class v2.0-870. [ 1.298526] initcall iscsi_transport_init+0x0/0x1b4 returned 0 after 189 usecs [ 1.298532] calling sas_transport_init+0x0/0xd5 @ 1 [ 1.298602] initcall sas_transport_init+0x0/0xd5 returned 0 after 62 usecs [ 1.298607] calling sas_class_init+0x0/0x31 @ 1 [ 1.298623] initcall sas_class_init+0x0/0x31 returned 0 after 10 usecs [ 1.298627] calling srp_transport_init+0x0/0x3d @ 1 [ 1.298653] initcall srp_transport_init+0x0/0x3d returned 0 after 19 usecs [ 1.298658] calling iscsi_sw_tcp_init+0x0/0x3f @ 1 [ 1.298701] iscsi: registered transport (tcp) [ 1.298761] initcall iscsi_sw_tcp_init+0x0/0x3f returned 0 after 95 usecs [ 1.298766] calling blogic_init+0x0/0xfcb @ 1 [ 1.298840] initcall blogic_init+0x0/0xfcb returned 0 after 66 usecs [ 1.298846] calling arcmsr_module_init+0x0/0x15 @ 1 [ 1.298889] initcall arcmsr_module_init+0x0/0x15 returned 0 after 35 usecs [ 1.298894] calling ahc_linux_init+0x0/0x62 @ 1 [ 1.298934] initcall ahc_linux_init+0x0/0x62 returned 0 after 33 usecs [ 1.298939] calling ahd_linux_init+0x0/0x7c @ 1 [ 1.298985] initcall ahd_linux_init+0x0/0x7c returned 0 after 39 usecs [ 1.298989] calling aac_init+0x0/0x72 @ 1 [ 1.298993] Adaptec aacraid driver 1.2-0[30300]-ms [ 1.299107] initcall aac_init+0x0/0x72 returned 0 after 108 usecs [ 1.299112] calling aic94xx_init+0x0/0x139 @ 1 [ 1.299116] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 1.299253] initcall aic94xx_init+0x0/0x139 returned 0 after 130 usecs [ 1.299258] calling ips_module_init+0x0/0x18b @ 1 [ 1.299309] initcall ips_module_init+0x0/0x18b returned -19 after 43 usecs [ 1.299314] calling qla1280_init+0x0/0x15 @ 1 [ 1.299348] initcall qla1280_init+0x0/0x15 returned 0 after 26 usecs [ 1.299352] calling qla2x00_module_init+0x0/0x202 @ 1 [ 1.299376] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k. [ 1.299511] initcall qla2x00_module_init+0x0/0x202 returned 0 after 148 usecs [ 1.299516] calling qla4xxx_module_init+0x0/0xda @ 1 [ 1.299561] iscsi: registered transport (qla4xxx) [ 1.299650] QLogic iSCSI HBA Driver [ 1.299701] initcall qla4xxx_module_init+0x0/0xda returned 0 after 173 usecs [ 1.299705] calling sym2_init+0x0/0xfe @ 1 [ 1.299744] initcall sym2_init+0x0/0xfe returned 0 after 32 usecs [ 1.299749] calling dc395x_module_init+0x0/0x15 @ 1 [ 1.299786] initcall dc395x_module_init+0x0/0x15 returned 0 after 30 usecs [ 1.299791] calling dc390_module_init+0x0/0x95 @ 1 [ 1.299794] DC390: clustering now enabled by default. If you get problems load [ 1.299881] with "disable_clustering=1" and report to maintainers [ 1.299992] initcall dc390_module_init+0x0/0x95 returned 0 after 189 usecs [ 1.299997] calling atp870u_init+0x0/0x15 @ 1 [ 1.300026] initcall atp870u_init+0x0/0x15 returned 0 after 22 usecs [ 1.300030] calling gdth_init+0x0/0xe6 @ 1 [ 1.300071] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 1.300186] initcall gdth_init+0x0/0xe6 returned 0 after 109 usecs [ 1.300191] calling initio_init_driver+0x0/0x15 @ 1 [ 1.300221] initcall initio_init_driver+0x0/0x15 returned 0 after 23 usecs [ 1.300226] calling inia100_init+0x0/0x15 @ 1 [ 1.300255] initcall inia100_init+0x0/0x15 returned 0 after 22 usecs [ 1.300260] calling hptiop_module_init+0x0/0x33 @ 1 [ 1.300264] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 1.300359] initcall hptiop_module_init+0x0/0x33 returned 0 after 90 usecs [ 1.300364] calling stex_init+0x0/0x2c @ 1 [ 1.300367] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 1.300471] initcall stex_init+0x0/0x2c returned 0 after 99 usecs [ 1.300476] calling mvs_init+0x0/0xa2 @ 1 [ 1.300522] initcall mvs_init+0x0/0xa2 returned 0 after 39 usecs [ 1.300527] calling init_st+0x0/0x169 @ 1 [ 1.300531] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1.300643] initcall init_st+0x0/0x169 returned 0 after 107 usecs [ 1.300648] calling init_osst+0x0/0x140 @ 1 [ 1.300652] osst :I: Tape driver with OnStream support version 0.99.4 [ 1.300652] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 1.300843] initcall init_osst+0x0/0x140 returned 0 after 183 usecs [ 1.300847] calling init_sd+0x0/0x157 @ 1 [ 1.300894] initcall init_sd+0x0/0x157 returned 0 after 39 usecs [ 1.300898] calling init_sr+0x0/0x47 @ 1 [ 1.300920] initcall init_sr+0x0/0x47 returned 0 after 15 usecs [ 1.300925] calling init_sg+0x0/0x121 @ 1 [ 1.300963] initcall init_sg+0x0/0x121 returned 0 after 30 usecs [ 1.300967] calling init_ch_module+0x0/0xad @ 1 [ 1.300970] SCSI Media Changer driver v0.25 [ 1.301074] initcall init_ch_module+0x0/0xad returned 0 after 97 usecs [ 1.301079] calling ahci_pci_driver_init+0x0/0x15 @ 1 [ 1.301117] ahci 0000:00:13.0: version 3.0 [ 1.301326] ahci 0000:00:13.0: irq 103 for MSI/MSI-X [ 1.312091] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode [ 1.312197] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds [ 1.312796] scsi0 : ahci [ 1.313029] scsi1 : ahci [ 1.313175] ata1: SATA max UDMA/133 abar m2048@0x90717000 port 0x90717100 irq 103 [ 1.313268] ata2: DUMMY [ 1.313319] calling 1_async_port_probe+0x0/0x48 @ 6 [ 1.313352] initcall ahci_pci_driver_init+0x0/0x15 returned 0 after 11953 usecs [ 1.313358] calling inic_pci_driver_init+0x0/0x15 @ 1 [ 1.313373] calling 2_async_port_probe+0x0/0x48 @ 16 [ 1.313392] initcall inic_pci_driver_init+0x0/0x15 returned 0 after 26 usecs [ 1.313397] calling sil24_pci_driver_init+0x0/0x15 @ 1 [ 1.313441] initcall sil24_pci_driver_init+0x0/0x15 returned 0 after 36 usecs [ 1.313446] calling qs_ata_pci_driver_init+0x0/0x15 @ 1 [ 1.313484] initcall qs_ata_pci_driver_init+0x0/0x15 returned 0 after 30 usecs [ 1.313489] calling pdc_sata_pci_driver_init+0x0/0x15 @ 1 [ 1.313522] initcall pdc_sata_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.313527] calling piix_init+0x0/0x26 @ 1 [ 1.313566] initcall piix_init+0x0/0x26 returned 0 after 31 usecs [ 1.313571] calling mv_init+0x0/0x48 @ 1 [ 1.313626] initcall mv_init+0x0/0x48 returned 0 after 48 usecs [ 1.313631] calling nv_pci_driver_init+0x0/0x15 @ 1 [ 1.313673] initcall nv_pci_driver_init+0x0/0x15 returned 0 after 34 usecs [ 1.313678] calling pdc_ata_pci_driver_init+0x0/0x15 @ 1 [ 1.313710] initcall pdc_ata_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.313715] calling sil_pci_driver_init+0x0/0x15 @ 1 [ 1.313746] initcall sil_pci_driver_init+0x0/0x15 returned 0 after 24 usecs [ 1.313751] calling sis_pci_driver_init+0x0/0x15 @ 1 [ 1.313787] initcall sis_pci_driver_init+0x0/0x15 returned 0 after 28 usecs [ 1.313792] calling k2_sata_pci_driver_init+0x0/0x15 @ 1 [ 1.313824] initcall k2_sata_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.313829] calling uli_pci_driver_init+0x0/0x15 @ 1 [ 1.313861] initcall uli_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.313866] calling svia_pci_driver_init+0x0/0x15 @ 1 [ 1.313897] initcall svia_pci_driver_init+0x0/0x15 returned 0 after 24 usecs [ 1.313902] calling vsc_sata_pci_driver_init+0x0/0x15 @ 1 [ 1.313938] initcall vsc_sata_pci_driver_init+0x0/0x15 returned 0 after 28 usecs [ 1.313943] calling ali_init+0x0/0x4e @ 1 [ 1.313976] initcall ali_init+0x0/0x4e returned 0 after 27 usecs [ 1.313981] calling amd_pci_driver_init+0x0/0x15 @ 1 [ 1.314014] initcall amd_pci_driver_init+0x0/0x15 returned 0 after 26 usecs [ 1.314019] calling artop_pci_driver_init+0x0/0x15 @ 1 [ 1.314051] initcall artop_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.314056] calling atiixp_pci_driver_init+0x0/0x15 @ 1 [ 1.314093] async_waiting @ 16 [ 1.314110] initcall atiixp_pci_driver_init+0x0/0x15 returned 0 after 46 usecs [ 1.314116] calling atp867x_driver_init+0x0/0x15 @ 1 [ 1.314151] initcall atp867x_driver_init+0x0/0x15 returned 0 after 27 usecs [ 1.314156] calling cmd64x_pci_driver_init+0x0/0x15 @ 1 [ 1.314188] initcall cmd64x_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.314193] calling cy82c693_pci_driver_init+0x0/0x15 @ 1 [ 1.314226] initcall cy82c693_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.314231] calling efar_pci_driver_init+0x0/0x15 @ 1 [ 1.314267] initcall efar_pci_driver_init+0x0/0x15 returned 0 after 29 usecs [ 1.314272] calling hpt36x_pci_driver_init+0x0/0x15 @ 1 [ 1.314305] initcall hpt36x_pci_driver_init+0x0/0x15 returned 0 after 26 usecs [ 1.314310] calling hpt37x_pci_driver_init+0x0/0x15 @ 1 [ 1.314344] initcall hpt37x_pci_driver_init+0x0/0x15 returned 0 after 27 usecs [ 1.314349] calling hpt3x2n_pci_driver_init+0x0/0x15 @ 1 [ 1.314383] initcall hpt3x2n_pci_driver_init+0x0/0x15 returned 0 after 27 usecs [ 1.314388] calling hpt3x3_pci_driver_init+0x0/0x15 @ 1 [ 1.314424] initcall hpt3x3_pci_driver_init+0x0/0x15 returned 0 after 29 usecs [ 1.314429] calling it8213_pci_driver_init+0x0/0x15 @ 1 [ 1.314462] initcall it8213_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.314467] calling it821x_pci_driver_init+0x0/0x15 @ 1 [ 1.314499] initcall it821x_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.314504] calling jmicron_pci_driver_init+0x0/0x15 @ 1 [ 1.314537] initcall jmicron_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.314541] calling marvell_pci_driver_init+0x0/0x15 @ 1 [ 1.314578] initcall marvell_pci_driver_init+0x0/0x15 returned 0 after 29 usecs [ 1.314583] calling netcell_pci_driver_init+0x0/0x15 @ 1 [ 1.314620] initcall netcell_pci_driver_init+0x0/0x15 returned 0 after 29 usecs [ 1.314625] calling ninja32_pci_driver_init+0x0/0x15 @ 1 [ 1.314658] initcall ninja32_pci_driver_init+0x0/0x15 returned 0 after 26 usecs [ 1.314663] calling ns87415_pci_driver_init+0x0/0x15 @ 1 [ 1.314696] initcall ns87415_pci_driver_init+0x0/0x15 returned 0 after 26 usecs [ 1.314701] calling oldpiix_pci_driver_init+0x0/0x15 @ 1 [ 1.314738] initcall oldpiix_pci_driver_init+0x0/0x15 returned 0 after 29 usecs [ 1.314743] calling optidma_pci_driver_init+0x0/0x15 @ 1 [ 1.314777] initcall optidma_pci_driver_init+0x0/0x15 returned 0 after 26 usecs [ 1.314782] calling pdc2027x_pci_driver_init+0x0/0x15 @ 1 [ 1.314815] initcall pdc2027x_pci_driver_init+0x0/0x15 returned 0 after 26 usecs [ 1.314820] calling pdc202xx_pci_driver_init+0x0/0x15 @ 1 [ 1.314853] initcall pdc202xx_pci_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.314858] calling serverworks_pci_driver_init+0x0/0x15 @ 1 [ 1.314894] initcall serverworks_pci_driver_init+0x0/0x15 returned 0 after 29 usecs [ 1.314899] calling sil680_pci_driver_init+0x0/0x15 @ 1 [ 1.314933] initcall sil680_pci_driver_init+0x0/0x15 returned 0 after 26 usecs [ 1.314938] calling sis_pci_driver_init+0x0/0x15 @ 1 [ 1.314971] initcall sis_pci_driver_init+0x0/0x15 returned 0 after 26 usecs [ 1.314976] calling triflex_pci_driver_init+0x0/0x15 @ 1 [ 1.315010] initcall triflex_pci_driver_init+0x0/0x15 returned 0 after 26 usecs [ 1.315015] calling via_pci_driver_init+0x0/0x15 @ 1 [ 1.315055] initcall via_pci_driver_init+0x0/0x15 returned 0 after 32 usecs [ 1.315060] calling sl82c105_pci_driver_init+0x0/0x15 @ 1 [ 1.315109] initcall sl82c105_pci_driver_init+0x0/0x15 returned 0 after 30 usecs [ 1.315114] calling cmd640_pci_driver_init+0x0/0x15 @ 1 [ 1.315149] initcall cmd640_pci_driver_init+0x0/0x15 returned 0 after 28 usecs [ 1.315154] calling mpiix_pci_driver_init+0x0/0x15 @ 1 [ 1.315189] initcall mpiix_pci_driver_init+0x0/0x15 returned 0 after 28 usecs [ 1.315194] calling ns87410_pci_driver_init+0x0/0x15 @ 1 [ 1.315233] initcall ns87410_pci_driver_init+0x0/0x15 returned 0 after 31 usecs [ 1.315239] calling opti_pci_driver_init+0x0/0x15 @ 1 [ 1.315275] initcall opti_pci_driver_init+0x0/0x15 returned 0 after 29 usecs [ 1.315280] calling pcmcia_driver_init+0x0/0xc @ 1 [ 1.315322] initcall pcmcia_driver_init+0x0/0xc returned 0 after 35 usecs [ 1.315327] calling pacpi_pci_driver_init+0x0/0x15 @ 1 [ 1.315362] initcall pacpi_pci_driver_init+0x0/0x15 returned 0 after 27 usecs [ 1.315367] calling ata_generic_pci_driver_init+0x0/0x15 @ 1 [ 1.315401] initcall ata_generic_pci_driver_init+0x0/0x15 returned 0 after 27 usecs [ 1.315406] calling net_olddevs_init+0x0/0x53 @ 1 [ 1.315416] initcall net_olddevs_init+0x0/0x53 returned 0 after 4 usecs [ 1.315420] calling b44_init+0x0/0x49 @ 1 [ 1.315473] initcall b44_init+0x0/0x49 returned 0 after 45 usecs [ 1.315478] calling bnx2_pci_driver_init+0x0/0x15 @ 1 [ 1.315512] initcall bnx2_pci_driver_init+0x0/0x15 returned 0 after 27 usecs [ 1.315517] calling cnic_init+0x0/0x79 @ 1 [ 1.315520] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 1.315669] initcall cnic_init+0x0/0x79 returned 0 after 140 usecs [ 1.315674] calling bnx2x_init+0x0/0xe8 @ 1 [ 1.315677] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 1.315931] initcall bnx2x_init+0x0/0xe8 returned 0 after 244 usecs [ 1.315937] calling tg3_driver_init+0x0/0x15 @ 1 [ 1.315976] initcall tg3_driver_init+0x0/0x15 returned 0 after 31 usecs [ 1.315981] calling e100_init_module+0x0/0x5b @ 1 [ 1.315984] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.316060] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.316193] initcall e100_init_module+0x0/0x5b returned 0 after 200 usecs [ 1.316199] calling e1000_init_module+0x0/0x7d @ 1 [ 1.316202] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.316287] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.319777] initcall e1000_init_module+0x0/0x7d returned 0 after 3481 usecs [ 1.319782] calling e1000_init_module+0x0/0x3a @ 1 [ 1.319785] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.323228] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 1.326936] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.330477] e1000e 0000:01:00.0: irq 104 for MSI/MSI-X [ 1.506561] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:15:17:0d:5f:a4 [ 1.510076] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.513647] e1000e 0000:01:00.0 eth0: MAC: 1, PHY: 4, PBA No: D28777-004 [ 1.517167] initcall e1000_init_module+0x0/0x3a returned 0 after 192373 usecs [ 1.517174] calling igb_init_module+0x0/0x48 @ 1 [ 1.517178] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 1.520677] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.524239] initcall igb_init_module+0x0/0x48 returned 0 after 6879 usecs [ 1.524244] calling catc_driver_init+0x0/0x15 @ 1 [ 1.524283] usbcore: registered new interface driver catc [ 1.527796] initcall catc_driver_init+0x0/0x15 returned 0 after 3454 usecs [ 1.527801] calling kaweth_driver_init+0x0/0x15 @ 1 [ 1.527826] usbcore: registered new interface driver kaweth [ 1.531296] initcall kaweth_driver_init+0x0/0x15 returned 0 after 3399 usecs [ 1.531301] calling pegasus_init+0x0/0x16a @ 1 [ 1.531304] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.534847] usbcore: registered new interface driver pegasus [ 1.538359] initcall pegasus_init+0x0/0x16a returned 0 after 6873 usecs [ 1.538364] calling rtl8150_driver_init+0x0/0x15 @ 1 [ 1.538388] usbcore: registered new interface driver rtl8150 [ 1.541842] initcall rtl8150_driver_init+0x0/0x15 returned 0 after 3383 usecs [ 1.541847] calling asix_driver_init+0x0/0x15 @ 1 [ 1.541881] usbcore: registered new interface driver asix [ 1.545308] initcall asix_driver_init+0x0/0x15 returned 0 after 3366 usecs [ 1.545313] calling ax88179_178a_driver_init+0x0/0x15 @ 1 [ 1.545341] usbcore: registered new interface driver ax88179_178a [ 1.548768] initcall ax88179_178a_driver_init+0x0/0x15 returned 0 after 3360 usecs [ 1.548773] calling cdc_driver_init+0x0/0x15 @ 1 [ 1.548798] usbcore: registered new interface driver cdc_ether [ 1.552212] initcall cdc_driver_init+0x0/0x15 returned 0 after 3345 usecs [ 1.552217] calling dm9601_driver_init+0x0/0x15 @ 1 [ 1.552241] usbcore: registered new interface driver dm9601 [ 1.555619] initcall dm9601_driver_init+0x0/0x15 returned 0 after 3309 usecs [ 1.555624] calling gl620a_driver_init+0x0/0x15 @ 1 [ 1.555648] usbcore: registered new interface driver gl620a [ 1.558990] initcall gl620a_driver_init+0x0/0x15 returned 0 after 3274 usecs [ 1.558995] calling net1080_driver_init+0x0/0x15 @ 1 [ 1.559019] usbcore: registered new interface driver net1080 [ 1.562319] initcall net1080_driver_init+0x0/0x15 returned 0 after 3232 usecs [ 1.562323] calling plusb_driver_init+0x0/0x15 @ 1 [ 1.562347] usbcore: registered new interface driver plusb [ 1.565584] initcall plusb_driver_init+0x0/0x15 returned 0 after 3172 usecs [ 1.565589] calling rndis_driver_init+0x0/0x15 @ 1 [ 1.565617] usbcore: registered new interface driver rndis_host [ 1.568808] initcall rndis_driver_init+0x0/0x15 returned 0 after 3131 usecs [ 1.568812] calling cdc_subset_driver_init+0x0/0x15 @ 1 [ 1.568836] usbcore: registered new interface driver cdc_subset [ 1.571991] initcall cdc_subset_driver_init+0x0/0x15 returned 0 after 3092 usecs [ 1.571996] calling zaurus_driver_init+0x0/0x15 @ 1 [ 1.572019] usbcore: registered new interface driver zaurus [ 1.575147] initcall zaurus_driver_init+0x0/0x15 returned 0 after 3066 usecs [ 1.575152] calling mcs7830_driver_init+0x0/0x15 @ 1 [ 1.575176] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.578299] initcall mcs7830_driver_init+0x0/0x15 returned 0 after 3061 usecs [ 1.578303] calling usbnet_init+0x0/0x28 @ 1 [ 1.578318] initcall usbnet_init+0x0/0x28 returned 0 after 10 usecs [ 1.578322] calling cdc_ncm_driver_init+0x0/0x15 @ 1 [ 1.578353] usbcore: registered new interface driver cdc_ncm [ 1.581431] initcall cdc_ncm_driver_init+0x0/0x15 returned 0 after 3024 usecs [ 1.581435] calling uio_init+0x0/0xe8 @ 1 [ 1.581457] initcall uio_init+0x0/0xe8 returned 0 after 15 usecs [ 1.581461] calling cdrom_init+0x0/0x18 @ 1 [ 1.581474] initcall cdrom_init+0x0/0x18 returned 0 after 7 usecs [ 1.581478] calling nonstatic_sysfs_init+0x0/0xc @ 1 [ 1.581484] initcall nonstatic_sysfs_init+0x0/0xc returned 0 after 1 usecs [ 1.581488] calling yenta_cardbus_driver_init+0x0/0x15 @ 1 [ 1.581533] initcall yenta_cardbus_driver_init+0x0/0x15 returned 0 after 37 usecs [ 1.581537] calling mon_init+0x0/0xf4 @ 1 [ 1.581669] initcall mon_init+0x0/0xf4 returned 0 after 122 usecs [ 1.581675] calling ehci_hcd_init+0x0/0x57 @ 1 [ 1.581679] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.584797] initcall ehci_hcd_init+0x0/0x57 returned 0 after 3037 usecs [ 1.584802] calling ehci_pci_init+0x0/0x63 @ 1 [ 1.584805] ehci-pci: EHCI PCI platform driver [ 1.587930] initcall ehci_pci_init+0x0/0x63 returned 0 after 3043 usecs [ 1.587934] calling isp116x_driver_init+0x0/0xe @ 1 [ 1.587964] initcall isp116x_driver_init+0x0/0xe returned 0 after 22 usecs [ 1.587968] calling ohci_hcd_mod_init+0x0/0x5c @ 1 [ 1.587971] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.591089] initcall ohci_hcd_mod_init+0x0/0x5c returned 0 after 3036 usecs [ 1.591093] calling ohci_pci_init+0x0/0x65 @ 1 [ 1.591097] ohci-pci: OHCI PCI platform driver [ 1.594215] initcall ohci_pci_init+0x0/0x65 returned 0 after 3037 usecs [ 1.594220] calling uhci_hcd_init+0x0/0xa4 @ 1 [ 1.594223] uhci_hcd: USB Universal Host Controller Interface driver [ 1.597363] initcall uhci_hcd_init+0x0/0xa4 returned 0 after 3057 usecs [ 1.597367] calling xhci_hcd_init+0x0/0x12 @ 1 [ 1.597556] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.600714] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.604285] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.604315] xhci_hcd 0000:00:14.0: irq 105 for MSI/MSI-X [ 1.604419] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.607550] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.610694] usb usb1: Product: xHCI Host Controller [ 1.613826] usb usb1: Manufacturer: Linux 3.15.0-rc3_drm-intel-fixes_e4c610_20140508+ xhci_hcd [ 1.617034] usb usb1: SerialNumber: 0000:00:14.0 [ 1.620425] hub 1-0:1.0: USB hub found [ 1.620689] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.622451] ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133 [ 1.622453] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.632385] ata1.00: configured for UDMA/133 [ 1.632398] async_waiting @ 6 [ 1.632402] async_continuing @ 6 after 1 usec [ 1.632535] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5 [ 1.632896] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.632969] initcall 1_async_port_probe+0x0/0x48 returned 0 after 311539 usecs [ 1.632978] calling 3_sd_probe_async+0x0/0x1c2 @ 6 [ 1.632993] async_continuing @ 16 after 310813 usec [ 1.632998] initcall 2_async_port_probe+0x0/0x48 returned 0 after 311518 usecs [ 1.633039] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.633177] sd 0:0:0:0: [sda] Write Protect is off [ 1.633181] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.633225] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.634757] sda: sda1 sda2 sda3 [ 1.635301] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.635308] initcall 3_sd_probe_async+0x0/0x1c2 returned 0 after 2264 usecs [ 1.658139] hub 1-0:1.0: 6 ports detected [ 1.662006] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.665212] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.668405] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.671580] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.674740] usb usb2: Product: xHCI Host Controller [ 1.677868] usb usb2: Manufacturer: Linux 3.15.0-rc3_drm-intel-fixes_e4c610_20140508+ xhci_hcd [ 1.681045] usb usb2: SerialNumber: 0000:00:14.0 [ 1.684361] hub 2-0:1.0: USB hub found [ 1.687413] hub 2-0:1.0: 1 port detected [ 1.690665] initcall xhci_hcd_init+0x0/0x12 returned 0 after 90925 usecs [ 1.690672] calling usb_storage_driver_init+0x0/0x15 @ 1 [ 1.690715] usbcore: registered new interface driver usb-storage [ 1.693748] initcall usb_storage_driver_init+0x0/0x15 returned 0 after 2992 usecs [ 1.693753] calling i8042_init+0x0/0x3df @ 1 [ 1.693838] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.697261] i8042: Warning: Keylock active [ 1.701574] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.704645] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.707766] initcall i8042_init+0x0/0x3df returned 0 after 13651 usecs [ 1.707771] calling serport_init+0x0/0x2a @ 1 [ 1.707777] initcall serport_init+0x0/0x2a returned 0 after 1 usecs [ 1.707781] calling mousedev_init+0x0/0x57 @ 1 [ 1.707878] mousedev: PS/2 mouse device common for all mice [ 1.710863] initcall mousedev_init+0x0/0x57 returned 0 after 2998 usecs [ 1.710868] calling evdev_init+0x0/0xc @ 1 [ 1.710874] initcall evdev_init+0x0/0xc returned 0 after 1 usecs [ 1.710877] calling atkbd_init+0x0/0x23 @ 1 [ 1.710914] initcall atkbd_init+0x0/0x23 returned 0 after 30 usecs [ 1.710919] calling psmouse_init+0x0/0x83 @ 1 [ 1.711026] initcall psmouse_init+0x0/0x83 returned 0 after 98 usecs [ 1.711030] calling cmos_init+0x0/0x6d @ 1 [ 1.711106] rtc_cmos 00:00: RTC can wake from S4 [ 1.714262] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.717286] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.720289] initcall cmos_init+0x0/0x6d returned 0 after 9017 usecs [ 1.720294] calling i2c_dev_init+0x0/0xc8 @ 1 [ 1.720297] i2c /dev entries driver [ 1.723256] initcall i2c_dev_init+0x0/0xc8 returned 0 after 2880 usecs [ 1.723262] calling efivars_sysfs_init+0x0/0x1f1 @ 1 [ 1.723269] initcall efivars_sysfs_init+0x0/0x1f1 returned -19 after 1 usecs [ 1.723273] calling hid_init+0x0/0x5c @ 1 [ 1.723314] hidraw: raw HID events driver (C) Jiri Kosina [ 1.726287] initcall hid_init+0x0/0x5c returned 0 after 2930 usecs [ 1.726291] calling hid_generic_init+0x0/0x15 @ 1 [ 1.726320] initcall hid_generic_init+0x0/0x15 returned 0 after 22 usecs [ 1.726325] calling a4_driver_init+0x0/0x15 @ 1 [ 1.726352] initcall a4_driver_init+0x0/0x15 returned 0 after 20 usecs [ 1.726357] calling apple_driver_init+0x0/0x15 @ 1 [ 1.726392] initcall apple_driver_init+0x0/0x15 returned 0 after 28 usecs [ 1.726396] calling belkin_driver_init+0x0/0x15 @ 1 [ 1.726423] initcall belkin_driver_init+0x0/0x15 returned 0 after 19 usecs [ 1.726427] calling ch_driver_init+0x0/0x15 @ 1 [ 1.726453] initcall ch_driver_init+0x0/0x15 returned 0 after 19 usecs [ 1.726458] calling ch_driver_init+0x0/0x15 @ 1 [ 1.726489] initcall ch_driver_init+0x0/0x15 returned 0 after 24 usecs [ 1.726494] calling cp_driver_init+0x0/0x15 @ 1 [ 1.726520] initcall cp_driver_init+0x0/0x15 returned 0 after 19 usecs [ 1.726525] calling ez_driver_init+0x0/0x15 @ 1 [ 1.726550] initcall ez_driver_init+0x0/0x15 returned 0 after 19 usecs [ 1.726555] calling gyration_driver_init+0x0/0x15 @ 1 [ 1.726581] initcall gyration_driver_init+0x0/0x15 returned 0 after 19 usecs [ 1.726585] calling ks_driver_init+0x0/0x15 @ 1 [ 1.726613] initcall ks_driver_init+0x0/0x15 returned 0 after 20 usecs [ 1.726617] calling lg_driver_init+0x0/0x15 @ 1 [ 1.726650] initcall lg_driver_init+0x0/0x15 returned 0 after 25 usecs [ 1.726654] calling ms_driver_init+0x0/0x15 @ 1 [ 1.726682] initcall ms_driver_init+0x0/0x15 returned 0 after 20 usecs [ 1.726686] calling mr_driver_init+0x0/0x15 @ 1 [ 1.726717] initcall mr_driver_init+0x0/0x15 returned 0 after 24 usecs [ 1.726722] calling ntrig_driver_init+0x0/0x15 @ 1 [ 1.726759] initcall ntrig_driver_init+0x0/0x15 returned 0 after 30 usecs [ 1.726764] calling pl_driver_init+0x0/0x15 @ 1 [ 1.726791] initcall pl_driver_init+0x0/0x15 returned 0 after 21 usecs [ 1.726796] calling pl_driver_init+0x0/0x15 @ 1 [ 1.726823] initcall pl_driver_init+0x0/0x15 returned 0 after 20 usecs [ 1.726827] calling samsung_driver_init+0x0/0x15 @ 1 [ 1.726854] initcall samsung_driver_init+0x0/0x15 returned 0 after 19 usecs [ 1.726858] calling sony_driver_init+0x0/0x15 @ 1 [ 1.726897] initcall sony_driver_init+0x0/0x15 returned 0 after 31 usecs [ 1.726901] calling sp_driver_init+0x0/0x15 @ 1 [ 1.726928] initcall sp_driver_init+0x0/0x15 returned 0 after 20 usecs [ 1.726932] calling ts_driver_init+0x0/0x15 @ 1 [ 1.726964] initcall ts_driver_init+0x0/0x15 returned 0 after 24 usecs [ 1.726968] calling hid_init+0x0/0x47 @ 1 [ 1.727006] usbcore: registered new interface driver usbhid [ 1.730012] usbhid: USB HID core driver [ 1.732977] initcall hid_init+0x0/0x47 returned 0 after 5850 usecs [ 1.732983] calling sock_diag_init+0x0/0xc @ 1 [ 1.732997] initcall sock_diag_init+0x0/0xc returned 0 after 8 usecs [ 1.733001] calling blackhole_module_init+0x0/0xc @ 1 [ 1.733009] initcall blackhole_module_init+0x0/0xc returned 0 after 1 usecs [ 1.733013] calling gre_offload_init+0x0/0x11 @ 1 [ 1.733019] initcall gre_offload_init+0x0/0x11 returned 0 after 1 usecs [ 1.733022] calling sysctl_ipv4_init+0x0/0x7f @ 1 [ 1.733091] initcall sysctl_ipv4_init+0x0/0x7f returned 0 after 61 usecs [ 1.733095] calling ipv4_netfilter_init+0x0/0xc @ 1 [ 1.733101] initcall ipv4_netfilter_init+0x0/0xc returned 0 after 1 usecs [ 1.733105] calling cubictcp_register+0x0/0x53 @ 1 [ 1.733109] TCP: cubic registered [ 1.736028] initcall cubictcp_register+0x0/0x53 returned 0 after 2843 usecs [ 1.736032] calling xfrm_user_init+0x0/0x4b @ 1 [ 1.736036] Initializing XFRM netlink socket [ 1.738995] initcall xfrm_user_init+0x0/0x4b returned 0 after 2881 usecs [ 1.738999] calling packet_init+0x0/0x3d @ 1 [ 1.739004] NET: Registered protocol family 17 [ 1.741990] initcall packet_init+0x0/0x3d returned 0 after 2909 usecs [ 1.741994] calling init_rpcsec_gss+0x0/0x5a @ 1 [ 1.742016] initcall init_rpcsec_gss+0x0/0x5a returned 0 after 16 usecs [ 1.742021] calling init_dns_resolver+0x0/0xde @ 1 [ 1.742039] Key type dns_resolver registered [ 1.745037] initcall init_dns_resolver+0x0/0xde returned 0 after 2934 usecs [ 1.745043] calling mcheck_init_device+0x0/0x100 @ 1 [ 1.745249] initcall mcheck_init_device+0x0/0x100 returned 0 after 194 usecs [ 1.745378] calling mcheck_debugfs_init+0x0/0x38 @ 1 [ 1.745393] initcall mcheck_debugfs_init+0x0/0x38 returned 0 after 7 usecs [ 1.745397] calling severities_debugfs_init+0x0/0x3a @ 1 [ 1.745406] initcall severities_debugfs_init+0x0/0x3a returned 0 after 2 usecs [ 1.745410] calling threshold_init_device+0x0/0x40 @ 1 [ 1.745418] initcall threshold_init_device+0x0/0x40 returned 0 after 2 usecs [ 1.745423] calling hpet_insert_resource+0x0/0x1e @ 1 [ 1.745431] initcall hpet_insert_resource+0x0/0x1e returned 0 after 2 usecs [ 1.745435] calling update_mp_table+0x0/0x436 @ 1 [ 1.745441] initcall update_mp_table+0x0/0x436 returned 0 after 1 usecs [ 1.745445] calling lapic_insert_resource+0x0/0x3e @ 1 [ 1.745452] initcall lapic_insert_resource+0x0/0x3e returned 0 after 1 usecs [ 1.745457] calling io_apic_bug_finalize+0x0/0x16 @ 1 [ 1.745463] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 1 usecs [ 1.745466] calling print_ICs+0x0/0x423 @ 1 [ 1.745473] initcall print_ICs+0x0/0x423 returned 0 after 1 usecs [ 1.745477] calling pat_memtype_list_init+0x0/0x34 @ 1 [ 1.745487] initcall pat_memtype_list_init+0x0/0x34 returned 0 after 3 usecs [ 1.745492] calling init_oops_id+0x0/0x31 @ 1 [ 1.745505] initcall init_oops_id+0x0/0x31 returned 0 after 7 usecs [ 1.745510] calling pm_qos_power_init+0x0/0x5a @ 1 [ 1.745688] initcall pm_qos_power_init+0x0/0x5a returned 0 after 166 usecs [ 1.745693] calling pm_debugfs_init+0x0/0x21 @ 1 [ 1.745703] initcall pm_debugfs_init+0x0/0x21 returned 0 after 4 usecs [ 1.745707] calling printk_late_init+0x0/0x3a @ 1 [ 1.745714] initcall printk_late_init+0x0/0x3a returned 0 after 2 usecs [ 1.745718] calling tk_debug_sleep_time_init+0x0/0x39 @ 1 [ 1.745727] initcall tk_debug_sleep_time_init+0x0/0x39 returned 0 after 3 usecs [ 1.745732] calling debugfs_kprobe_init+0x0/0x83 @ 1 [ 1.745744] initcall debugfs_kprobe_init+0x0/0x83 returned 0 after 6 usecs [ 1.745748] calling taskstats_init+0x0/0x69 @ 1 [ 1.745764] registered taskstats version 1 [ 1.748836] initcall taskstats_init+0x0/0x69 returned 0 after 3002 usecs [ 1.748842] calling fault_around_debugfs+0x0/0x32 @ 1 [ 1.748885] initcall fault_around_debugfs+0x0/0x32 returned 0 after 35 usecs [ 1.748891] calling max_swapfiles_check+0x0/0x3 @ 1 [ 1.748897] initcall max_swapfiles_check+0x0/0x3 returned 0 after 1 usecs [ 1.748901] calling check_early_ioremap_leak+0x0/0x3f @ 1 [ 1.748908] initcall check_early_ioremap_leak+0x0/0x3f returned 0 after 1 usecs [ 1.748925] calling init_btrfs_fs+0x0/0xff @ 1 [ 1.749704] Btrfs loaded [ 1.752730] initcall init_btrfs_fs+0x0/0xff returned 0 after 3700 usecs [ 1.752735] calling init_root_keyring+0x0/0x5 @ 1 [ 1.752770] initcall init_root_keyring+0x0/0x5 returned 0 after 28 usecs [ 1.752775] calling prandom_reseed+0x0/0x44 @ 1 [ 1.752817] initcall prandom_reseed+0x0/0x44 returned 0 after 35 usecs [ 1.752822] calling pci_resource_alignment_sysfs_init+0x0/0x17 @ 1 [ 1.752832] initcall pci_resource_alignment_sysfs_init+0x0/0x17 returned 0 after 4 usecs [ 1.752836] calling pci_sysfs_init+0x0/0x4e @ 1 [ 1.753152] initcall pci_sysfs_init+0x0/0x4e returned 0 after 301 usecs [ 1.753159] calling deferred_probe_initcall+0x0/0x65 @ 1 [ 1.753223] initcall deferred_probe_initcall+0x0/0x65 returned 0 after 55 usecs [ 1.753229] calling late_resume_init+0x0/0xde @ 1 [ 1.753233] Magic number: 14:225:550 [ 1.756304] clockevents clockevent1: hash matches [ 1.759423] acpi PNP0C0F:01: hash matches [ 1.762547] initcall late_resume_init+0x0/0xde returned 0 after 9074 usecs [ 1.762552] calling firmware_memmap_init+0x0/0x2a @ 1 [ 1.762638] initcall firmware_memmap_init+0x0/0x2a returned 0 after 78 usecs [ 1.762644] calling pci_mmcfg_late_insert_resources+0x0/0x46 @ 1 [ 1.762652] initcall pci_mmcfg_late_insert_resources+0x0/0x46 returned 0 after 3 usecs [ 1.762657] calling tcp_congestion_default+0x0/0xc @ 1 [ 1.762665] initcall tcp_congestion_default+0x0/0xc returned 0 after 2 usecs [ 1.762671] calling software_resume+0x0/0x285 @ 1 [ 1.762675] PM: Hibernation image not present or could not be loaded. [ 1.762680] initcall software_resume+0x0/0x285 returned -2 after 3 usecs [ 1.762727] Warning: unable to open an initial console. [ 1.765879] async_waiting @ 1 [ 1.765884] async_continuing @ 1 after 1 usec [ 1.777928] Freeing unused kernel memory: 22736K (ffffffff81b66000 - ffffffff8319a000) [ 1.856518] dracut: dracut-018-35.git20120510.fc17 [ 1.928404] udevd[1213]: starting version 182 [ 1.934301] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 1.965140] calling drm_core_init+0x0/0x107 [drm] @ 1221 [ 1.965501] [drm] Initialized drm 1.1.0 20060810 [ 1.968893] initcall drm_core_init+0x0/0x107 [drm] returned 0 after 3627 usecs [ 1.976733] calling acpi_button_driver_init+0x0/0xc [button] @ 1221 [ 1.976913] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.990056] ACPI: Lid Switch [LID0] [ 1.996545] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 2.000339] ACPI: Power Button [PWRB] [ 2.004253] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 2.009263] ACPI: Sleep Button [SLPB] [ 2.013671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 2.014265] ACPI: Power Button [PWRF] [ 2.014519] initcall acpi_button_driver_init+0x0/0xc [button] returned 0 after 36814 usecs [ 2.015081] calling acpi_video_init+0x0/0x8b [video] @ 1221 [ 2.015099] initcall acpi_video_init+0x0/0x8b [video] returned 0 after 12 usecs [ 2.015495] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 2.019008] calling i915_init+0x0/0x6a [i915] @ 1221 [ 2.020086] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0f31 flags=is_mobile,need_gfx_hws,is_valleyview,has_hotplug, [ 2.020086] [drm:intel_detect_pch] No PCH found. [ 2.020368] [drm] Memory usable by graphics device = 2048M [ 2.020370] [drm:i915_gem_gtt_init] GMADR size = 256M [ 2.020372] [drm:i915_gem_gtt_init] GTT stolen size = 64M [ 2.020373] [drm:i915_gem_gtt_init] ppgtt mode: 0 [ 2.020376] checking generic (80000000 7e9000) vs hw (80000000 10000000) [ 2.020377] fb: switching to inteldrmfb from EFI VGA [ 2.046868] Console: switching to colour dummy device 80x25 [ 2.081585] [drm:intel_opregion_setup] graphic opregion physical addr: 0x794d9018 [ 2.081608] [drm:intel_opregion_setup] Public ACPI methods supported [ 2.081611] [drm:intel_opregion_setup] ASLE supported [ 2.081667] i915 0000:00:02.0: irq 106 for MSI/MSI-X [ 2.081680] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.081689] [drm] Driver supports precise vblank timestamp query. [ 2.081696] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 2.081700] [drm:intel_parse_bios] Using VBT from OpRegion: $VBT VALLEYVIEW [ 2.081705] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.081708] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 2.081713] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 2.081718] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 2.081722] [drm:parse_lfp_panel_data] VBT initial LVDS value 0 [ 2.081726] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 2.081729] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 2.081744] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 2.081755] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at 7b000000 [ 2.081759] [drm:intel_display_power_get] enabling always-on [ 2.081762] [drm:intel_display_power_get] enabling display [ 2.087589] [drm:intel_display_power_get] enabling dpio-common [ 2.093597] [drm:intel_display_power_get] enabling dpio-tx-b-01 [ 2.099609] [drm:intel_display_power_get] enabling dpio-tx-b-23 [ 2.105758] [drm:intel_display_power_get] enabling dpio-tx-c-01 [ 2.111769] [drm:intel_display_power_get] enabling dpio-tx-c-23 [ 2.129849] [drm:intel_modeset_init] 2 display pipes available. [ 2.129889] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.130308] [drm:intel_crt_reset] pch crt adpa set to 0xf40000 [ 2.130393] [drm:intel_dp_init_connector] Adding DP connector on port B [ 2.130464] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 2.130889] [drm:intel_dp_init_connector] Adding eDP connector on port C [ 2.130957] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 2.130962] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 2.130966] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.130969] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 2.130972] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-eDP-1 [ 2.131300] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 2.131310] [drm:_edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d [ 2.131608] [drm:intel_dp_get_dpcd] DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 2.131773] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 2.131783] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 2.152308] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.152369] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 7812/7812, sysfs interface registered [ 2.152378] [drm:intel_dsi_init] [ 2.152382] [drm:intel_dsi_init] no device found [ 2.157873] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled [ 2.161870] [drm:intel_modeset_readout_hw_state] [CRTC:9] hw state readout: disabled [ 2.169884] [drm:intel_modeset_readout_hw_state] [ENCODER:13:DAC-13] hw state readout: disabled, pipe A [ 2.192974] tsc: Refined TSC clocksource calibration: 1999.999 MHz [ 2.193794] [drm:intel_modeset_readout_hw_state] [ENCODER:14:TMDS-14] hw state readout: disabled, pipe A [ 2.197063] usb 1-1: New USB device found, idVendor=03f0, idProduct=0024 [ 2.197072] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.197080] usb 1-1: Product: HP Basic USB Keyboard [ 2.197086] usb 1-1: Manufacturer: CHICONY [ 2.197363] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.202474] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:03F0:0024.0001/input/input5 [ 2.202710] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-1/input0 [ 2.203831] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 2.203972] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.215843] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A [ 2.236012] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A [ 2.260065] [drm:intel_dp_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 2.260071] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: enabled, pipe A [ 2.284107] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:eDP-1] hw state readout: enabled [ 2.292123] [drm:intel_modeset_readout_hw_state] [CONNECTOR:12:VGA-1] hw state readout: disabled [ 2.316169] [drm:intel_modeset_readout_hw_state] [CONNECTOR:15:HDMI-A-1] hw state readout: disabled [ 2.340217] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:DP-1] hw state readout: disabled [ 2.356376] usb 1-6: new high-speed USB device number 3 using xhci_hcd [ 2.364264] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:HDMI-A-2] hw state readout: disabled [ 2.364272] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A [ 2.364275] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 2.364278] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.364282] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.364286] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.364289] [drm:intel_dump_pipe_config] requested mode: [ 2.364294] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 2.364297] [drm:intel_dump_pipe_config] adjusted mode: [ 2.364302] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 2.364306] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 2.364309] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.364312] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.364316] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.364319] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.364322] [drm:intel_dump_pipe_config] ips: 0 [ 2.364325] [drm:intel_dump_pipe_config] double wide: 0 [ 2.364329] [drm:intel_dump_pipe_config] [CRTC:9][setup_hw_state] config for pipe B [ 2.364332] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 2.364334] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 2.364338] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.364342] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.364345] [drm:intel_dump_pipe_config] requested mode: [ 2.364349] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.364352] [drm:intel_dump_pipe_config] adjusted mode: [ 2.364356] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.364361] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.364363] [drm:intel_dump_pipe_config] port clock: 0 [ 2.364366] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 2.364370] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.364373] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.364376] [drm:intel_dump_pipe_config] ips: 0 [ 2.364378] [drm:intel_dump_pipe_config] double wide: 0 [ 2.388336] [drm:intel_connector_check_state] [CONNECTOR:23:eDP-1] [ 2.492515] [drm:check_encoder_state] [ENCODER:13:DAC-13] [ 2.500556] [drm:check_encoder_state] [ENCODER:14:TMDS-14] [ 2.520825] usb 1-6: New USB device found, idVendor=0424, idProduct=2640 [ 2.520834] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.521509] hub 1-6:1.0: USB hub found [ 2.521603] hub 1-6:1.0: 3 ports detected [ 2.524445] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 2.548639] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 2.572685] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 2.596731] [drm:check_crtc_state] [CRTC:5] [ 2.626788] [drm:check_crtc_state] [CRTC:9] [ 2.630794] [drm:i9xx_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 2.630800] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 2.630806] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 2.630815] [drm:intel_alloc_plane_obj] plane fb obj ffff8800719cc180 [ 2.630821] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 2.630824] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, 7ffff000] [ 2.633231] [drm:i915_gem_context_init] HW context support initialized [ 2.633248] [drm:init_status_page] render ring hws offset: 0x007ed000 [ 2.633252] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 2.633256] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=131072 [ 2.634817] [drm:init_pipe_control] render ring pipe control offset: 0x00810000 [ 2.634833] [drm:init_status_page] bsd ring hws offset: 0x00811000 [ 2.634837] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 2.634841] [drm:i915_pages_create_for_stolen] offset=0x809000, size=131072 [ 2.634891] [drm:init_status_page] blitter ring hws offset: 0x00834000 [ 2.634895] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 2.634899] [drm:i915_pages_create_for_stolen] offset=0x829000, size=131072 [ 2.634947] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000 [ 2.634952] [drm:i915_pages_create_for_stolen] offset=0x3efa000, size=24576 [ 2.636803] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 2.636831] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:eDP-1] [ 2.660851] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 2.661037] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 2.661210] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 2.708957] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.733081] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:eDP-1] probed modes : [ 2.733089] [drm:drm_mode_debug_printmodeline] Modeline 24:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.733093] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [ 2.733097] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1 [ 2.740859] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 2.747019] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, result 0 [ 2.747023] [drm:intel_crt_detect] CRT not detected via hotplug [ 2.747178] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 2.747182] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 2.747185] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 2.747189] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 2.749301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 2.749307] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 2.749310] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 2.757039] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [ 2.757045] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] [ 2.757049] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] [ 2.781233] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 2.781238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 2.795142] usb 1-6.1: new high-speed USB device number 4 using xhci_hcd [ 2.805135] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] disconnected [ 2.805140] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1] [ 2.829182] [drm:intel_dp_detect] [CONNECTOR:19:DP-1] [ 2.853230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1] disconnected [ 2.853235] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-2] [ 2.853239] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 2.877423] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.877427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 2.885907] usb 1-6.1: New USB device found, idVendor=0424, idProduct=4040 [ 2.885917] usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.885925] usb 1-6.1: Product: Ultra Fast Media Reader [ 2.885932] usb 1-6.1: Manufacturer: Generic [ 2.885937] usb 1-6.1: SerialNumber: 000000264001 [ 2.886466] usb-storage 1-6.1:1.0: USB Mass Storage device detected [ 2.886676] scsi2 : usb-storage 1-6.1:1.0 [ 2.901176] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-2] disconnected [ 2.901182] [drm:drm_setup_crtcs] [ 2.901186] [drm:drm_enable_connectors] connector 23 enabled? yes [ 2.901190] [drm:drm_enable_connectors] connector 12 enabled? no [ 2.901193] [drm:drm_enable_connectors] connector 15 enabled? no [ 2.901196] [drm:drm_enable_connectors] connector 19 enabled? no [ 2.901199] [drm:drm_enable_connectors] connector 21 enabled? no [ 2.901203] [drm:intel_fb_initial_config] looking for cmdline mode on connector 23 [ 2.901206] [drm:intel_fb_initial_config] looking for preferred mode on connector 23 [ 2.901210] [drm:intel_fb_initial_config] connector eDP-1 on crtc 5: 1920x1080 [ 2.901213] [drm:intel_fb_initial_config] connector 12 not enabled, skipping [ 2.901216] [drm:intel_fb_initial_config] connector 15 not enabled, skipping [ 2.901218] [drm:intel_fb_initial_config] connector 19 not enabled, skipping [ 2.901221] [drm:intel_fb_initial_config] connector 21 not enabled, skipping [ 2.901225] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5 [ 2.901231] [drm:intelfb_create] no BIOS fb, allocating a new one [ 2.901235] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 2.901240] [drm:i915_pages_create_for_stolen] offset=0x849000, size=8294400 [ 2.906138] [drm:intelfb_create] allocated 1920x1080 fb: 0x00856000, bo ffff880071a48480 [ 2.906286] fbcon: inteldrmfb (fb0) is primary device [ 2.906394] [drm:intel_crtc_cursor_set] cursor off [ 2.906399] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 2.906402] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 2.906406] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.906410] [drm:drm_mode_debug_printmodeline] Modeline 29:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.906412] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 2.906414] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 2.906419] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.906423] [drm:connected_sink_compute_bpp] [CONNECTOR:23:eDP-1] checking for sink bpp constrains [ 2.906428] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 2.906429] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 2.906430] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 2.906440] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 2.906442] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 2.906445] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 2.906447] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 2.906448] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 2.906450] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.906452] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.906455] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.906456] [drm:intel_dump_pipe_config] requested mode: [ 2.906460] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.906461] [drm:intel_dump_pipe_config] adjusted mode: [ 2.906464] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.906467] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 2.906468] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.906470] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.906472] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.906473] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.906475] [drm:intel_dump_pipe_config] ips: 0 [ 2.906476] [drm:intel_dump_pipe_config] double wide: 0 [ 2.912201] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 2.912204] [drm:intel_edp_backlight_off] [ 2.912370] [drm:intel_edp_panel_off] Turn eDP power off [ 2.960427] usb 1-6.2: new high-speed USB device number 5 using xhci_hcd [ 3.059623] usb 1-6.2: New USB device found, idVendor=0b95, idProduct=772b [ 3.059626] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.059629] usb 1-6.2: Product: AX88772B [ 3.059631] usb 1-6.2: Manufacturer: ASIX Elec. Corp. [ 3.059633] usb 1-6.2: SerialNumber: 000310 [ 3.113593] [drm:wait_panel_off] Wait for panel power off time [ 3.113597] [drm:wait_panel_status] mask b0000000 value 00000000 status c0000008 control abcd0000 [ 3.147096] [drm:wait_panel_status] Wait complete [ 3.148553] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 3.148555] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 3.178851] [drm:intel_dp_link_down] [ 3.195212] Switched to clocksource tsc [ 3.230942] [drm:g4x_wait_for_vblank] vblank wait timed out [ 3.286094] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 3.362211] [drm:intel_display_power_put] disabling always-on [ 3.364955] asix 1-6.2:1.0 eth1: register 'asix' at usb-0000:00:14.0-6.2, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:73:82 [ 3.384122] [drm:i9xx_update_primary_plane] Writing base 00856000 00000000 0 0 7680 [ 3.384136] [drm:intel_edp_psr_match_conditions] PSR not supported on this platform [ 3.384141] [drm:intel_crtc_mode_set] [ENCODER:22:TMDS-22] set [MODE:0:1920x1080] [ 3.406303] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 [ 3.406306] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 3.406308] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 3.406309] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 3.406314] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 3.406317] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 3.406319] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3.716178] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 3.746275] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 3.746290] [drm:valleyview_enable_rps] GPLL enabled? yes [ 3.746297] [drm:valleyview_enable_rps] GPU status: 0x0000c590 [ 3.746305] [drm:valleyview_enable_rps] current GPU freq: 311 MHz (197) [ 3.747965] [drm:valleyview_enable_rps] max GPU freq: 755 MHz (217) [ 3.751973] [drm:valleyview_enable_rps] RPe GPU freq: 400 MHz (201) [ 3.753977] [drm:valleyview_enable_rps] min GPU freq: 178 MHz (191) [ 3.753978] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 3.753981] [drm:valleyview_set_rps] GPU freq request from 311 MHz (197) to 400 MHz (201) [ 3.804350] [drm:wait_panel_status] Wait complete [ 3.804366] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 3.804372] [drm:_edp_panel_vdd_on] eDP was not running [ 3.834352] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 3.834361] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 3.892253] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 2.01 PQ: 0 ANSI: 0 [ 3.893292] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.895842] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 4.019482] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 4.033509] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 4.033954] [drm:intel_dp_start_link_train] clock recovery OK [ 4.033956] [drm:intel_edp_panel_on] Turn eDP power on [ 4.033958] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 4.033962] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 4.033963] [drm:wait_panel_status] Wait complete [ 4.033965] [drm:wait_panel_on] Wait for panel power on [ 4.033968] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 4.188100] [drm:wait_panel_status] Wait complete [ 4.188109] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 4.188122] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 4.188133] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 4.188143] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 4.189007] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 4.189202] [drm:g4x_check_srwm] SR watermark: display plane 107, cursor 2 [ 4.189204] [drm:g4x_check_srwm] SR watermark: display plane 211, cursor 2 [ 4.189208] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=61, cursor=2, B: plane=2, cursor=2, SR: plane=107, cursor=2 [ 4.222745] [drm:intel_edp_backlight_on] [ 4.222749] [drm:intel_panel_enable_backlight] pipe A [ 4.222752] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812 [ 4.246925] [drm:intel_connector_check_state] [CONNECTOR:23:eDP-1] [ 4.351128] [drm:check_encoder_state] [ENCODER:13:DAC-13] [ 4.359143] [drm:check_encoder_state] [ENCODER:14:TMDS-14] [ 4.383190] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 4.407247] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 4.431294] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 4.455340] [drm:check_crtc_state] [CRTC:5] [ 4.485405] [drm:check_crtc_state] [CRTC:9] [ 4.489412] [drm:intel_crtc_cursor_set] cursor off [ 4.489414] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 4.489418] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 4.489422] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.489431] Console: switching to colour frame buffer device 240x67 [ 4.489445] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 4.489448] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 4.489451] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.506059] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.506135] i915 0000:00:02.0: registered panic notifier [ 4.512391] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.513184] acpi device:38: registered as cooling_device3 [ 4.513422] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8 [ 4.513694] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.513874] initcall i915_init+0x0/0x6a [i915] returned 0 after 2431610 usecs [ 4.523106] dracut: Starting plymouth daemon [ 4.537360] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 4.537365] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 4.537369] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.558952] [drm:i915_gem_open] [ 4.559000] [drm:intel_crtc_cursor_set] cursor off [ 4.559007] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 4.559014] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 4.559019] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.559023] [drm:intel_crtc_cursor_set] cursor off [ 4.559026] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 4.559030] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 4.559034] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.559057] [drm:i915_gem_open] [ 4.559084] [drm:intel_crtc_cursor_set] cursor off [ 4.559088] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 4.559093] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 4.559097] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.559100] [drm:intel_crtc_cursor_set] cursor off [ 4.559103] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 4.559107] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 4.559111] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.559130] [drm:i915_gem_open] [ 4.559629] [drm:intel_crtc_cursor_set] cursor off [ 4.559635] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 4.559640] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 4.559645] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.559648] [drm:intel_crtc_cursor_set] cursor off [ 4.559652] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 4.559655] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 4.559659] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.560110] dracut: error: unexpectedly disconnected from boot status daemon [ 4.570908] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 4.570914] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 4.570918] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.765359] calling acpi_cpufreq_init+0x0/0x1c6 [acpi_cpufreq] @ 1444 [ 4.765993] initcall acpi_cpufreq_init+0x0/0x1c6 [acpi_cpufreq] returned 0 after 604 usecs [ 4.776840] calling acpi_ac_init+0x0/0x36 [ac] @ 1443 [ 4.777966] ACPI: AC Adapter [ADP1] (on-line) [ 4.778176] initcall acpi_ac_init+0x0/0x36 [ac] returned 0 after 1290 usecs [ 4.788016] calling acpi_battery_init+0x0/0x13 [battery] @ 1444 [ 4.788028] initcall acpi_battery_init+0x0/0x13 [battery] returned 0 after 3 usecs [ 4.788394] ACPI: Battery Slot [BAT0] (battery present) [ 4.788511] ACPI: Battery Slot [BAT1] (battery absent) [ 4.813099] calling init_soundcore+0x0/0x9b [soundcore] @ 1446 [ 4.813128] initcall init_soundcore+0x0/0x9b [soundcore] returned 0 after 19 usecs [ 4.813858] calling alsa_sound_init+0x0/0x84 [snd] @ 1446 [ 4.813915] initcall alsa_sound_init+0x0/0x84 [snd] returned 0 after 42 usecs [ 4.814320] calling alsa_timer_init+0x0/0x15e [snd_timer] @ 1446 [ 4.814422] initcall alsa_timer_init+0x0/0x15e [snd_timer] returned 0 after 89 usecs [ 4.815313] calling alsa_pcm_init+0x0/0x67 [snd_pcm] @ 1446 [ 4.815331] initcall alsa_pcm_init+0x0/0x67 [snd_pcm] returned 0 after 5 usecs [ 4.815679] calling alsa_hwdep_init+0x0/0x5f [snd_hwdep] @ 1446 [ 4.815693] initcall alsa_hwdep_init+0x0/0x5f [snd_hwdep] returned 0 after 5 usecs [ 4.817810] calling azx_driver_init+0x0/0x1a [snd_hda_intel] @ 1446 [ 4.818099] snd_hda_intel 0000:00:1b.0: irq 107 for MSI/MSI-X [ 4.818234] initcall azx_driver_init+0x0/0x1a [snd_hda_intel] returned 0 after 400 usecs [ 4.823535] calling i2c_i801_init+0x0/0xa4 [i2c_i801] @ 1448 [ 4.823731] ACPI Warning: SystemIO range 0x0000000000002000-0x000000000000201f conflicts with OpRegion 0x0000000000002000-0x000000000000200f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258) [ 4.823956] calling lpc_ich_driver_init+0x0/0x1a [lpc_ich] @ 1447 [ 4.823962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.824123] initcall i2c_i801_init+0x0/0xa4 [i2c_i801] returned 0 after 562 usecs [ 4.824189] initcall lpc_ich_driver_init+0x0/0x1a [lpc_ich] returned 0 after 220 usecs [ 4.826298] calling pcspkr_platform_driver_init+0x0/0x13 [pcspkr] @ 1443 [ 4.826416] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 4.826614] initcall pcspkr_platform_driver_init+0x0/0x13 [pcspkr] returned 0 after 297 usecs [ 4.827278] calling serio_raw_drv_init+0x0/0x1a [serio_raw] @ 1447 [ 4.827323] initcall serio_raw_drv_init+0x0/0x1a [serio_raw] returned 0 after 34 usecs [ 4.848999] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 4.849109] EXT4-fs (sda2): write access will be enabled during recovery [ 4.883397] calling patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] @ 2335 [ 4.883408] initcall patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] returned 0 after 0 usecs [ 4.885120] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 4.885231] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.885312] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.885387] sound hdaudioC0D0: mono: mono_out=0x0 [ 4.885449] sound hdaudioC0D0: inputs: [ 4.885501] sound hdaudioC0D0: Front Mic=0x19 [ 4.885562] sound hdaudioC0D0: Rear Mic=0x18 [ 4.885621] sound hdaudioC0D0: Line=0x1a [ 4.900930] calling patch_hdmi_init+0x0/0xc [snd_hda_codec_hdmi] @ 2339 [ 4.900940] initcall patch_hdmi_init+0x0/0xc [snd_hda_codec_hdmi] returned 0 after 0 usecs [ 4.923171] EXT4-fs (sda2): recovery complete [ 4.923759] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.934909] calling iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] @ 1441 [ 4.934915] iTCO_vendor_support: vendor-support=0 [ 4.934985] initcall iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] returned 0 after 65 usecs [ 4.935231] calling iTCO_wdt_init_module+0x0/0x2b [iTCO_wdt] @ 1441 [ 4.935235] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.943183] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 4.943189] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 4.943193] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 4.946040] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 4.946256] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.946290] initcall iTCO_wdt_init_module+0x0/0x2b [iTCO_wdt] returned 0 after 10768 usecs [ 4.983132] dracut: Checking ext4: /dev/sda2 [ 4.987525] dracut: issuing e2fsck -a /dev/sda2 [ 5.006932] dracut: /dev/sda2: clean, 716421/13598720 files, 24175513/54372608 blocks [ 5.011988] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro [ 5.023897] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 5.036716] dracut: Mounted root filesystem /dev/sda2 [ 5.063724] calling dm_init+0x0/0x43 [dm_mod] @ 2396 [ 5.063827] device-mapper: uevent: version 1.0.3 [ 5.067955] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 5.071951] initcall dm_init+0x0/0x43 [dm_mod] returned 0 after 8000 usecs [ 5.130889] dracut: Switching root [ 5.144560] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 5.144570] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 5.193473] random: init urandom read with 99 bits of entropy available [ 5.258676] init: ureadahead main process (2419) terminated with status 5 [ 5.352839] random: nonblocking pool is initialized [ 5.577333] systemd-udevd[2528]: starting version 204 [ 6.044675] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 6.044681] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 6.044684] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 6.060449] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 6.060455] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 6.060459] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 6.109875] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 6.109881] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 6.109885] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 6.238945] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 6.238952] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 6.238956] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 6.330846] Adding 16440316k swap on /dev/sda3. Priority:-1 extents:1 across:16440316k SS [ 6.336810] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.377615] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 6.399937] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 6.479295] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 6.485618] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 6.604353] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 6.613282] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 6.822450] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 6.838941] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 6.984631] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory [ 7.208256] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 7.227996] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 7.264130] init: failsafe main process (3221) killed by TERM signal [ 7.781664] init: avahi-cups-reload main process (3421) terminated with status 1 [ 8.044888] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 8.594401] asix 1-6.2:1.0 eth4: link down [ 8.738120] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 8.738127] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 8.738131] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 8.740202] e1000e 0000:01:00.0: irq 104 for MSI/MSI-X [ 8.764324] init: lightdm main process (3540) terminated with status 1 [ 8.849626] e1000e 0000:01:00.0: irq 104 for MSI/MSI-X [ 8.856862] init: plymouth-ready (startup) main process (2416) terminated with status 1 [ 8.890425] init: plymouth-stop pre-start process (3638) terminated with status 1 [ 10.391161] asix 1-6.2:1.0 eth4: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 13.562444] init: failsafe-x main process (3810) terminated with status 1 [ 212.750639] [drm:i915_gem_open] [ 212.750690] [drm:intel_crtc_cursor_set] cursor off [ 212.750697] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 212.750704] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 212.750710] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 212.750715] [drm:intel_crtc_cursor_set] cursor off [ 212.750718] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 212.750722] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 212.750726] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 212.750748] [drm:i915_gem_open] [ 212.750933] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 755 MHz (217) [ 212.752201] [drm:i915_gem_open] [ 212.752240] [drm:i915_gem_open] [ 212.752248] [drm:valleyview_set_rps] GPU freq request from 755 MHz (217) to 400 MHz (201) [ 212.754314] [drm:intel_crtc_cursor_set] cursor off [ 212.754323] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 212.754330] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 212.754336] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 212.754340] [drm:intel_crtc_cursor_set] cursor off [ 212.754343] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 212.754347] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 212.754352] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 231.544810] [drm:i915_gem_open] [ 231.544865] [drm:intel_crtc_cursor_set] cursor off [ 231.544872] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 231.544880] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 231.544886] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 231.544891] [drm:intel_crtc_cursor_set] cursor off [ 231.544894] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 231.544898] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 231.544902] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 231.544924] [drm:i915_gem_open] [ 231.545087] [drm:valleyview_set_rps] GPU freq request from 178 MHz (191) to 755 MHz (217) [ 231.546839] [drm:i915_gem_open] [ 231.546886] [drm:i915_gem_open] [ 231.547735] [drm:intel_crtc_cursor_set] cursor off [ 231.547744] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 231.547770] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 231.547776] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 231.547780] [drm:intel_crtc_cursor_set] cursor off [ 231.547855] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 231.547860] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 231.547864] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5]