[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.15.0-rc3_drm-intel-next-queued_1cf0ba_20140512+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2546 SMP Mon May 12 11:44:41 CST 2014 [ 0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_12/drm-intel-next-queued/1cf0ba14740d96fbf6f58a201f000a34b74f4725/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_12/drm-intel-next-queued/1cf0ba14740d96fbf6f58a201f000a34b74f4725/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-next-queued_1cf0ba_20140512+ kexec_jump_back_entry=0x0002bffe [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009a3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a27eefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a27ef000-0x00000000a2aaefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a2aaf000-0x00000000a2faefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a2faf000-0x00000000a2fe9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a2fea000-0x00000000a2ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a3000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Intel Corporation Shark Bay Client platform/SthiPpvRsvd2, BIOS HSWLPTU1.86C.0134.R00.1310022130 10/02/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x44e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00AD800000 mask 7FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xa3000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0323c000, 0x0323cfff] PGTABLE [ 0.000000] BRK [0x0323d000, 0x0323dfff] PGTABLE [ 0.000000] BRK [0x0323e000, 0x0323efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x44e400000-0x44e5fffff] [ 0.000000] [mem 0x44e400000-0x44e5fffff] page 2M [ 0.000000] BRK [0x0323f000, 0x0323ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x44c000000-0x44e3fffff] [ 0.000000] [mem 0x44c000000-0x44e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x44bffffff] [ 0.000000] [mem 0x400000000-0x43fffffff] page 1G [ 0.000000] [mem 0x440000000-0x44bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xa27eefff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xa25fffff] page 2M [ 0.000000] [mem 0xa2600000-0xa27eefff] page 4k [ 0.000000] init_memory_mapping: [mem 0xa2fea000-0xa2ffffff] [ 0.000000] [mem 0xa2fea000-0xa2ffffff] page 4k [ 0.000000] BRK [0x03240000, 0x03240fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000A2FB3188 0000CC (v01 INTEL HSW-LPT 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000A2FE4000 0000F4 (v05 INTEL HSW-LPT 00000000 MSFT 0000005F) [ 0.000000] ACPI: DSDT 0x00000000A2FC4000 01A1A5 (v02 INTEL HSW-LPT 00000000 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000A2F8B000 000040 [ 0.000000] ACPI: SSDT 0x00000000A2FE7000 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000A2FA3000 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000A2FE6000 0006B2 (v01 Intel PerfTune 00001000 INTL 20120913) [ 0.000000] ACPI: DBGP 0x00000000A2FE5000 000034 (v01 INTEL HSW-LPT 00000000 MSFT 0000005F) [ 0.000000] ACPI: HPET 0x00000000A2FE3000 000038 (v01 INTEL HSW-LPT 00000001 MSFT 0000005F) [ 0.000000] ACPI: LPIT 0x00000000A2FE2000 000094 (v01 INTEL HSW-LPT 00000000 MSFT 0000005F) [ 0.000000] ACPI: APIC 0x00000000A2FE1000 0000BC (v01 INTEL HSW-LPT 00000001 MSFT 0000005F) [ 0.000000] ACPI: MCFG 0x00000000A2FE0000 00003C (v01 INTEL HSW-LPT 00000001 MSFT 0000005F) [ 0.000000] ACPI: WDAT 0x00000000A2FDF000 000104 (v01 INTEL HSW-LPT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000A2FC1000 002028 (v01 INTEL PtidDevc 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000A2FC0000 000228 (v01 INTEL sensrhub 00000000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000A2FBF000 000183 (v01 INTEL zpodd 00001000 INTL 20120913) [ 0.000000] ACPI: BOOT 0x00000000A2FBE000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000A2FBD000 00057D (v01 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000A2FBC000 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000A2FB8000 0034FC (v01 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: DMAR 0x00000000A2FB7000 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: FPDT 0x00000000A2FB6000 000044 (v01 INTEL TIANO 00000001 MSFT 01000013) [ 0.000000] ACPI: ASF! 0x00000000A2FB5000 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: BGRT 0x00000000A2FB4000 000038 (v01 INTEL TIANO 00000001 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000044e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x44e5fffff] [ 0.000000] NODE_DATA [mem 0x44e5fa000-0x44e5fdfff] [ 0.000000] [ffffea0000000000-ffffea00113fffff] PMD -> [ffff88043de00000-ffff88044dbfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x44e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0xa27eefff] [ 0.000000] node 0: [mem 0xa2fea000-0xa2ffffff] [ 0.000000] node 0: [mem 0x100000000-0x44e5fffff] [ 0.000000] On node 0 totalpages: 4132254 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3993 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10337 pages used for memmap [ 0.000000] DMA32 zone: 661509 pages, LIFO batch:31 [ 0.000000] Normal zone: 54168 pages used for memmap [ 0.000000] Normal zone: 3466752 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa27ef000-0xa2aaefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa2aaf000-0xa2faefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa2faf000-0xa2fe9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa3000000-0xaf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed83fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88044e200000 s74752 r8192 d23552 u262144 [ 0.000000] pcpu-alloc: s74752 r8192 d23552 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4067664 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_12/drm-intel-next-queued/1cf0ba14740d96fbf6f58a201f000a34b74f4725/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_12/drm-intel-next-queued/1cf0ba14740d96fbf6f58a201f000a34b74f4725/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-next-queued_1cf0ba_20140512+ kexec_jump_back_entry=0x0002bffe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16166692K/16529016K available (7365K kernel code, 723K rwdata, 3568K rodata, 22744K init, 600K bss, 362324K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3192.729 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.45 BogoMIPS (lpj=3192729) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000009] ACPI: Core revision 20140214 [ 0.011600] ACPI: All ACPI Tables successfully acquired [ 0.011617] Security Framework initialized [ 0.012238] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.014199] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.015051] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.015064] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.015236] CPU: Physical Processor ID: 0 [ 0.015238] CPU: Processor Core ID: 0 [ 0.016014] mce: CPU supports 9 MCE banks [ 0.016023] CPU0: Thermal LVT vector (0xfa) already installed [ 0.016029] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.016029] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.016029] tlb_flushall_shift: 6 [ 0.016120] Freeing SMP alternatives memory: 32K (ffffffff8319c000 - ffffffff831a4000) [ 0.016551] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.026565] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (fam: 06, model: 3c, stepping: 03) [ 0.026572] TSC deadline timer enabled [ 0.026578] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.026584] ... version: 3 [ 0.026586] ... bit width: 48 [ 0.026587] ... generic registers: 8 [ 0.026588] ... value mask: 0000ffffffffffff [ 0.026589] ... max period: 0000ffffffffffff [ 0.026590] ... fixed-purpose events: 3 [ 0.026592] ... event mask: 00000007000000ff [ 0.026727] x86: Booting SMP configuration: [ 0.026729] .... node #0, CPUs: #1 [ 0.038640] CPU1: Thermal LVT vector (0xfa) already installed [ 0.040804] #2<7>[ 0.052727] CPU2: Thermal LVT vector (0xfa) already installed [ 0.066806] #3 [ 0.066806] CPU3: Thermal LVT vector (0xfa) already installed [ 0.068912] x86: Booted up 1 node, 4 CPUs [ 0.068917] smpboot: Total of 4 processors activated (25541.83 BogoMIPS) [ 0.071269] devtmpfs: initialized [ 0.071476] PM: Registering ACPI NVS region [mem 0xa2aaf000-0xa2faefff] (5242880 bytes) [ 0.071569] xor: automatically using best checksumming function: [ 0.081167] avx : 32244.000 MB/sec [ 0.081188] RTC time: 2:49:44, date: 05/13/14 [ 0.081218] NET: Registered protocol family 16 [ 0.081338] cpuidle: using governor ladder [ 0.081340] cpuidle: using governor menu [ 0.081403] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.081405] ACPI: bus type PCI registered [ 0.081447] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.081450] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.086590] PCI: Using configuration type 1 for base access [ 0.105205] raid6: sse2x1 10273 MB/s [ 0.122232] raid6: sse2x2 12730 MB/s [ 0.139255] raid6: sse2x4 15058 MB/s [ 0.156277] raid6: avx2x1 20175 MB/s [ 0.173301] raid6: avx2x2 22945 MB/s [ 0.190326] raid6: avx2x4 26867 MB/s [ 0.190327] raid6: using algorithm avx2x4 (26867 MB/s) [ 0.190328] raid6: using avx2x2 recovery algorithm [ 0.190347] ACPI: Added _OSI(Module Device) [ 0.190349] ACPI: Added _OSI(Processor Device) [ 0.190350] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.190351] ACPI: Added _OSI(Processor Aggregator Device) [ 0.200953] ACPI: Executed 2 blocks of module-level executable AML code [ 0.212402] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.217470] ACPI: SSDT 0x00000000A2A47A18 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.217869] ACPI: Dynamic OEM Table Load: [ 0.217871] ACPI: SSDT 0x0000000000000000 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.221560] ACPI: SSDT 0x00000000A2A48818 000792 (v01 PmRef ApIst 00003000 INTL 20120913) [ 0.222118] ACPI: Dynamic OEM Table Load: [ 0.222120] ACPI: SSDT 0x0000000000000000 000792 (v01 PmRef ApIst 00003000 INTL 20120913) [ 0.226485] ACPI: SSDT 0x00000000A2A46D98 000119 (v01 PmRef ApCst 00003000 INTL 20120913) [ 0.226886] ACPI: Dynamic OEM Table Load: [ 0.226888] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20120913) [ 0.241592] ACPI: Interpreter enabled [ 0.241599] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 0.241604] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 0.241617] ACPI: (supports S0 S3 S4 S5) [ 0.241619] ACPI: Using IOAPIC for interrupt routing [ 0.241637] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.255198] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.261678] ACPI: Power Resource [FN00] (off) [ 0.261727] ACPI: Power Resource [FN01] (on) [ 0.262039] ACPI: Power Resource [FN02] (on) [ 0.262093] ACPI: Power Resource [FN03] (on) [ 0.262146] ACPI: Power Resource [FN04] (on) [ 0.262692] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.262697] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.263092] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.263393] PCI host bridge to bus 0000:00 [ 0.263396] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.263398] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.263400] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.263402] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.263404] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff] [ 0.263410] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.263518] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.263526] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.263530] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.263534] pci 0000:00:02.0: reg 0x20: [io 0x7000-0x703f] [ 0.263633] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.263638] pci 0000:00:03.0: reg 0x10: [mem 0xc2730000-0xc2733fff 64bit] [ 0.263756] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.263772] pci 0000:00:14.0: reg 0x10: [mem 0xc2720000-0xc272ffff 64bit] [ 0.263824] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.263893] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.263922] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.263939] pci 0000:00:16.0: reg 0x10: [mem 0xc2739000-0xc273900f 64bit] [ 0.263994] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.264088] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.264102] pci 0000:00:16.3: reg 0x10: [io 0x70b0-0x70b7] [ 0.264110] pci 0000:00:16.3: reg 0x14: [mem 0xc273f000-0xc273ffff] [ 0.264256] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.264271] pci 0000:00:19.0: reg 0x10: [mem 0xc2700000-0xc271ffff] [ 0.264278] pci 0000:00:19.0: reg 0x14: [mem 0xc273e000-0xc273efff] [ 0.264285] pci 0000:00:19.0: reg 0x18: [io 0x7080-0x709f] [ 0.264337] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.264407] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.264438] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.264456] pci 0000:00:1a.0: reg 0x10: [mem 0xc273d000-0xc273d3ff] [ 0.264535] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.264619] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.264649] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.264661] pci 0000:00:1b.0: reg 0x10: [mem 0xc2734000-0xc2737fff 64bit] [ 0.264722] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.264792] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.264818] pci 0000:00:1c.0: [8086:8c18] type 01 class 0x060400 [ 0.264876] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.264947] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.264976] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400 [ 0.265034] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.265105] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 0.265137] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.265155] pci 0000:00:1d.0: reg 0x10: [mem 0xc273c000-0xc273c3ff] [ 0.265235] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.265313] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.265344] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100 [ 0.265524] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.265537] pci 0000:00:1f.2: reg 0x10: [io 0x70a8-0x70af] [ 0.265546] pci 0000:00:1f.2: reg 0x14: [io 0x70bc-0x70bf] [ 0.265552] pci 0000:00:1f.2: reg 0x18: [io 0x70a0-0x70a7] [ 0.265559] pci 0000:00:1f.2: reg 0x1c: [io 0x70b8-0x70bb] [ 0.265565] pci 0000:00:1f.2: reg 0x20: [io 0x7060-0x707f] [ 0.265572] pci 0000:00:1f.2: reg 0x24: [mem 0xc273b000-0xc273b7ff] [ 0.265604] pci 0000:00:1f.2: PME# supported from D3hot [ 0.265694] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.265706] pci 0000:00:1f.3: reg 0x10: [mem 0xc2738000-0xc27380ff 64bit] [ 0.265723] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.265887] pci 0000:01:00.0: [8086:0082] type 00 class 0x028000 [ 0.265925] pci 0000:01:00.0: reg 0x10: [mem 0xc2600000-0xc2601fff 64bit] [ 0.266123] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.266153] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.267562] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.267568] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc26fffff] [ 0.267612] pci 0000:00:1c.6: PCI bridge to [bus 02-09] [ 0.267616] pci 0000:00:1c.6: bridge window [io 0x3000-0x6fff] [ 0.267619] pci 0000:00:1c.6: bridge window [mem 0xc1500000-0xc25fffff] [ 0.267624] pci 0000:00:1c.6: bridge window [mem 0xc0400000-0xc14fffff 64bit pref] [ 0.267636] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.273001] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.273035] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.273066] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.273096] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 0.273127] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.273157] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.273186] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.273216] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.273364] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.273447] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.273502] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.273505] vgaarb: loaded [ 0.273506] vgaarb: bridge control possible 0000:00:02.0 [ 0.273550] SCSI subsystem initialized [ 0.273577] libata version 3.00 loaded. [ 0.273598] ACPI: bus type USB registered [ 0.273616] usbcore: registered new interface driver usbfs [ 0.273624] usbcore: registered new interface driver hub [ 0.273645] usbcore: registered new device driver usb [ 0.273666] pps_core: LinuxPPS API ver. 1 registered [ 0.273668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.273672] PTP clock support registered [ 0.273717] PCI: Using ACPI for IRQ routing [ 0.278944] PCI: pci_cache_line_size set to 64 bytes [ 0.278979] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff] [ 0.278980] e820: reserve RAM buffer [mem 0xa27ef000-0xa3ffffff] [ 0.278981] e820: reserve RAM buffer [mem 0xa3000000-0xa3ffffff] [ 0.278982] e820: reserve RAM buffer [mem 0x44e600000-0x44fffffff] [ 0.279052] NetLabel: Initializing [ 0.279054] NetLabel: domain hash size = 128 [ 0.279055] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.279063] NetLabel: unlabeled traffic allowed by default [ 0.279140] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.279145] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.281166] Switched to clocksource hpet [ 0.281194] pnp: PnP ACPI init [ 0.281199] ACPI: bus type PNP registered [ 0.281389] system 00:00: [io 0x06a4] has been reserved [ 0.281391] system 00:00: [io 0x06a0] has been reserved [ 0.281394] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.286201] pnp 00:01: [dma 4] [ 0.286215] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.286229] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.286295] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.286325] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.286351] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.286354] system 00:05: [io 0xffff] has been reserved [ 0.286355] system 00:05: [io 0xffff] has been reserved [ 0.286357] system 00:05: [io 0xffff] has been reserved [ 0.286359] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 0.286361] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.286363] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.286391] system 00:06: [io 0x0800-0x087f] has been reserved [ 0.286393] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.286411] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.286441] system 00:08: [io 0x1854-0x1857] has been reserved [ 0.286443] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.286509] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.286570] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.286695] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.286698] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.286699] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.286701] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.286703] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.286705] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.286707] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.286709] system 00:0b: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.286711] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved [ 0.286713] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.286715] system 00:0b: [mem 0xafa20000-0xafa20fff] has been reserved [ 0.286717] system 00:0b: [mem 0xafa10000-0xafa1ffff] has been reserved [ 0.286719] system 00:0b: [mem 0xa2a9f000-0xa2aaefff] has been reserved [ 0.286721] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.287118] system 00:0c: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.287120] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.287195] pnp: PnP ACPI: found 13 devices [ 0.287196] ACPI: bus type PNP unregistered [ 0.292946] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.292952] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc26fffff] [ 0.292959] pci 0000:00:1c.6: PCI bridge to [bus 02-09] [ 0.292962] pci 0000:00:1c.6: bridge window [io 0x3000-0x6fff] [ 0.292967] pci 0000:00:1c.6: bridge window [mem 0xc1500000-0xc25fffff] [ 0.292971] pci 0000:00:1c.6: bridge window [mem 0xc0400000-0xc14fffff 64bit pref] [ 0.292978] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.292979] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.292980] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.292981] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff] [ 0.292982] pci_bus 0000:01: resource 1 [mem 0xc2600000-0xc26fffff] [ 0.292984] pci_bus 0000:02: resource 0 [io 0x3000-0x6fff] [ 0.292985] pci_bus 0000:02: resource 1 [mem 0xc1500000-0xc25fffff] [ 0.292986] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc14fffff 64bit pref] [ 0.293000] NET: Registered protocol family 2 [ 0.293125] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.293276] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.293382] TCP: Hash tables configured (established 131072 bind 65536) [ 0.293393] TCP: reno registered [ 0.293405] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.293445] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.293497] NET: Registered protocol family 1 [ 0.293533] RPC: Registered named UNIX socket transport module. [ 0.293535] RPC: Registered udp transport module. [ 0.293536] RPC: Registered tcp transport module. [ 0.293537] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.293542] pci 0000:00:02.0: Boot video device [ 0.293594] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.293596] pci 0000:00:14.0: PCI INT A: no GSI [ 0.293655] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.293839] PCI: CLS 0 bytes, default 64 [ 0.572033] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.572040] software IO TLB [mem 0x9e7ef000-0xa27ef000] (64MB) mapped at [ffff88009e7ef000-ffff8800a27eefff] [ 0.572122] Simple Boot Flag at 0x47 set to 0x1 [ 0.572605] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.572630] audit: initializing netlink subsys (disabled) [ 0.572638] audit: type=2000 audit(1399949384.568:1): initialized [ 0.590270] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.591260] VFS: Disk quotas dquot_6.5.2 [ 0.591283] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.591697] NFS: Registering the id_resolver key type [ 0.591703] Key type id_resolver registered [ 0.591705] Key type id_legacy registered [ 0.591707] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.591791] fuse init (API version 7.23) [ 0.591847] msgmni has been set to 31575 [ 0.592008] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.592011] io scheduler noop registered [ 0.592013] io scheduler deadline registered [ 0.592030] io scheduler cfq registered (default) [ 0.592154] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.592258] pcieport 0000:00:1c.6: irq 41 for MSI/MSI-X [ 0.592338] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.592340] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.592344] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.592356] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt [ 0.592360] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded [ 0.592363] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.592387] vesafb: mode is 1920x1080x32, linelength=7680, pages=2032 [ 0.592388] vesafb: scrolling: redraw [ 0.592390] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.592601] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k [ 0.726702] Console: switching to colour frame buffer device 240x67 [ 0.852665] fb0: VESA VGA frame buffer device [ 0.853149] ACPI: Fan [FAN0] (off) [ 0.853490] ACPI: Fan [FAN1] (on) [ 0.853830] ACPI: Fan [FAN2] (on) [ 0.854161] ACPI: Fan [FAN3] (on) [ 0.854490] ACPI: Fan [FAN4] (on) [ 0.855073] Monitor-Mwait will be used to enter C-1 state [ 0.855076] Monitor-Mwait will be used to enter C-2 state [ 0.855079] ACPI: acpi_idle registered with cpuidle [ 0.893379] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.893918] ACPI: Thermal Zone [TZ00] (72 C) [ 0.895406] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.895943] ACPI: Thermal Zone [TZ01] (72 C) [ 0.896387] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.917554] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.938823] 0000:00:16.3: ttyS1 at I/O 0x70b0 (irq = 19, base_baud = 115200) is a 16550A [ 0.939769] Non-volatile memory driver v1.3 [ 0.940163] Linux agpgart interface v0.103 [ 0.941311] brd: module loaded [ 0.941656] Loading iSCSI transport class v2.0-870. [ 0.942223] iscsi: registered transport (tcp) [ 0.942715] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.943182] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.943873] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k. [ 0.944674] iscsi: registered transport (qla4xxx) [ 0.945135] QLogic iSCSI HBA Driver [ 0.945483] DC390: clustering now enabled by default. If you get problems load [ 0.946173] with "disable_clustering=1" and report to maintainers [ 0.946823] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.947416] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.947924] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.948517] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.949123] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.949123] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.950379] SCSI Media Changer driver v0.25 [ 0.950808] ahci 0000:00:1f.2: version 3.0 [ 0.950881] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 0.950896] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.951540] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x18 impl SATA mode [ 0.952319] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.955058] scsi0 : ahci [ 0.955371] scsi1 : ahci [ 0.981145] scsi2 : ahci [ 1.006459] scsi3 : ahci [ 1.031291] scsi4 : ahci [ 1.055894] scsi5 : ahci [ 1.079772] ata1: DUMMY [ 1.103417] ata2: DUMMY [ 1.126973] ata3: DUMMY [ 1.150134] ata4: SATA max UDMA/133 abar m2048@0xc273b000 port 0xc273b280 irq 42 [ 1.173813] ata5: SATA max UDMA/133 abar m2048@0xc273b000 port 0xc273b300 irq 42 [ 1.197325] ata6: DUMMY [ 1.220785] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 1.244336] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 1.268737] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.293267] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.317954] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.342790] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.367569] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.392284] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 1.416994] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.442139] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 1.525207] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.552315] ata4.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133 [ 1.575239] tsc: Refined TSC clocksource calibration: 3192.606 MHz [ 1.603294] ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.609849] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.609850] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fb:63:6e [ 1.609851] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.609898] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.609914] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 1.609915] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.609940] usbcore: registered new interface driver catc [ 1.609946] usbcore: registered new interface driver kaweth [ 1.609947] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.609952] usbcore: registered new interface driver pegasus [ 1.609957] usbcore: registered new interface driver rtl8150 [ 1.609965] usbcore: registered new interface driver asix [ 1.609970] usbcore: registered new interface driver ax88179_178a [ 1.609975] usbcore: registered new interface driver cdc_ether [ 1.609982] usbcore: registered new interface driver dm9601 [ 1.609987] usbcore: registered new interface driver gl620a [ 1.609992] usbcore: registered new interface driver net1080 [ 1.609997] usbcore: registered new interface driver plusb [ 1.610002] usbcore: registered new interface driver rndis_host [ 1.610008] usbcore: registered new interface driver cdc_subset [ 1.610014] usbcore: registered new interface driver zaurus [ 1.610019] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.610029] usbcore: registered new interface driver cdc_ncm [ 1.610084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.610085] ehci-pci: EHCI PCI platform driver [ 1.610189] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.610223] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.610235] ehci-pci 0000:00:1a.0: debug port 2 [ 1.614137] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.614149] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc273d000 [ 1.619255] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.619274] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.619274] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.619275] usb usb1: Product: EHCI Host Controller [ 1.619276] usb usb1: Manufacturer: Linux 3.15.0-rc3_drm-intel-next-queued_1cf0ba_20140512+ ehci_hcd [ 1.619277] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.619363] hub 1-0:1.0: USB hub found [ 1.619366] hub 1-0:1.0: 3 ports detected [ 2.521231] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.524783] ata4.00: configured for UDMA/133 [ 2.524896] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5 [ 2.525059] sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 2.525063] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 2.525099] sd 3:0:0:0: [sda] Write Protect is off [ 2.525100] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.525114] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.525577] sda: sda1 sda2 [ 2.525755] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.726509] Switched to clocksource tsc [ 2.726540] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.726550] ehci-pci 0000:00:1d.0: debug port 2 [ 2.730451] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.730463] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc273c000 [ 2.736168] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.736186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.736187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.736188] usb usb2: Product: EHCI Host Controller [ 2.736188] usb usb2: Manufacturer: Linux 3.15.0-rc3_drm-intel-next-queued_1cf0ba_20140512+ ehci_hcd [ 2.736189] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.736288] hub 2-0:1.0: USB hub found [ 2.736291] hub 2-0:1.0: 3 ports detected [ 2.736401] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.736403] ohci-pci: OHCI PCI platform driver [ 2.736415] uhci_hcd: USB Universal Host Controller Interface driver [ 2.736473] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 2.736474] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 2.736486] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.736518] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.736594] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.736607] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X [ 2.736645] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.736646] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.736647] usb usb3: Product: xHCI Host Controller [ 2.736648] usb usb3: Manufacturer: Linux 3.15.0-rc3_drm-intel-next-queued_1cf0ba_20140512+ xhci_hcd [ 2.736648] usb usb3: SerialNumber: 0000:00:14.0 [ 2.736705] hub 3-0:1.0: USB hub found [ 2.736720] hub 3-0:1.0: 15 ports detected [ 2.739289] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.739324] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.739352] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.739352] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.739353] usb usb4: Product: xHCI Host Controller [ 2.739354] usb usb4: Manufacturer: Linux 3.15.0-rc3_drm-intel-next-queued_1cf0ba_20140512+ xhci_hcd [ 2.739355] usb usb4: SerialNumber: 0000:00:14.0 [ 2.739410] hub 4-0:1.0: USB hub found [ 2.739420] hub 4-0:1.0: 6 ports detected [ 2.740190] usbcore: registered new interface driver usb-storage [ 2.740219] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.740219] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.740652] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.740692] mousedev: PS/2 mouse device common for all mice [ 2.740747] rtc_cmos 00:07: RTC can wake from S4 [ 2.740848] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.740873] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.740879] i2c /dev entries driver [ 2.740893] hidraw: raw HID events driver (C) Jiri Kosina [ 2.741005] usbcore: registered new interface driver usbhid [ 2.741005] usbhid: USB HID core driver [ 2.741045] TCP: cubic registered [ 2.741045] Initializing XFRM netlink socket [ 2.741047] NET: Registered protocol family 17 [ 2.741060] Key type dns_resolver registered [ 2.741261] registered taskstats version 1 [ 2.741482] Btrfs loaded [ 2.741737] Magic number: 14:964:813 [ 2.741764] ehci-pci 0000:00:1a.0: hash matches [ 2.741836] PM: Hibernation image not present or could not be loaded. [ 2.741845] Warning: unable to open an initial console. [ 2.852267] ata5: SATA link down (SStatus 0 SControl 300) [ 2.928331] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.939908] Freeing unused kernel memory: 22744K (ffffffff81b66000 - ffffffff8319c000) [ 2.983944] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.357906] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 3.357907] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.452815] hub 1-1:1.0: USB hub found [ 3.552516] hub 1-1:1.0: 6 ports detected [ 4.285142] dracut: dracut-018-35.git20120510.fc17 [ 4.326696] udevd[1411]: starting version 182 [ 4.360699] [drm] Initialized drm 1.1.0 20060810 [ 4.381509] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.412520] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 4.438933] ACPI: Lid Switch [LID0] [ 4.438976] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 4.439030] ACPI: Power Button [PWRB] [ 4.439062] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.439253] ACPI: Power Button [PWRF] [ 4.440748] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0412 flags=need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 4.440748] [drm:intel_detect_pch] Found LynxPoint PCH [ 4.440822] [drm] Memory usable by graphics device = 2048M [ 4.440822] [drm:i915_gem_gtt_init] GMADR size = 256M [ 4.440823] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 4.440824] checking generic (b0000000 7f0000) vs hw (b0000000 10000000) [ 4.440824] fb: switching to inteldrmfb from VESA VGA [ 4.495903] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 4.495905] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.496163] hub 2-1:1.0: USB hub found [ 4.496264] hub 2-1:1.0: 8 ports detected [ 4.650729] usb 3-3: new low-speed USB device number 2 using xhci_hcd [ 4.917683] Console: switching to colour dummy device 80x25 [ 4.920476] usb 3-3: New USB device found, idVendor=046d, idProduct=c077 [ 4.920480] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.920482] usb 3-3: Product: USB Optical Mouse [ 4.920484] usb 3-3: Manufacturer: Logitech [ 4.920544] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 4.922516] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C077.0001/input/input4 [ 4.922574] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-3/input0 [ 4.924337] [drm:intel_opregion_setup] graphic opregion physical addr: 0xa2fa8018 [ 4.924342] [drm:intel_opregion_setup] Public ACPI methods supported [ 4.924343] [drm:intel_opregion_setup] SWSCI supported [ 4.929969] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 4.929984] [drm:intel_opregion_setup] ASLE supported [ 4.930034] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 4.930040] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.930041] [drm] Driver supports precise vblank timestamp query. [ 4.930043] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 4.930045] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 4.930047] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 4.930048] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 4.930049] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 4.930051] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 4.930053] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 4.930054] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 4.930055] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 4.930057] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 4.930058] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 4.930059] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 4.930060] [drm:parse_driver_features] DRRS State Enabled:1 [ 4.930061] [drm:parse_mipi] No MIPI config BDB found [ 4.930063] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 4.930064] [drm:parse_ddi_port] VBT HDMI level shift for port B: 6 [ 4.930065] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 4.930066] [drm:parse_ddi_port] VBT HDMI level shift for port C: 6 [ 4.930067] [drm:parse_ddi_port] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 4.930068] [drm:parse_ddi_port] VBT HDMI level shift for port D: 6 [ 4.930099] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 4.930102] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ada00000 [ 4.930104] [drm:intel_display_power_get] enabling always-on [ 4.930105] [drm:intel_display_power_get] enabling display [ 4.930107] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.930144] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 4.930145] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec) [ 4.930146] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec) [ 4.930147] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec) [ 4.930148] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 4.930149] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 4.930150] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec) [ 4.930150] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec) [ 4.930151] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec) [ 4.930152] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 4.930153] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 4.930154] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec) [ 4.930155] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec) [ 4.930156] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec) [ 4.930157] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 4.930158] [drm:intel_modeset_init] 3 display pipes available. [ 4.930168] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz [ 4.930496] [drm:intel_crt_reset] pch crt adpa set to 0xf40000 [ 4.930498] [drm:intel_dp_init_connector] Adding DP connector on port B [ 4.930515] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 4.930606] [drm:intel_dp_init_connector] Adding DP connector on port D [ 4.930622] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-2 [ 5.002032] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled [ 5.002036] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 5.002038] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled [ 5.002039] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port C using clock 0x80000000 [ 5.002042] [drm:intel_modeset_readout_hw_state] [ENCODER:14:DAC-14] hw state readout: disabled, pipe A [ 5.002043] [drm:intel_modeset_readout_hw_state] [ENCODER:15:TMDS-15] hw state readout: disabled, pipe A [ 5.002046] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: enabled, pipe A [ 5.002047] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A [ 5.002049] [drm:intel_modeset_readout_hw_state] [CONNECTOR:13:VGA-1] hw state readout: disabled [ 5.002050] [drm:intel_modeset_readout_hw_state] [CONNECTOR:16:DP-1] hw state readout: disabled [ 5.002052] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-1] hw state readout: disabled [ 5.002053] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:HDMI-A-2] hw state readout: enabled [ 5.002055] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-2] hw state readout: disabled [ 5.002056] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:HDMI-A-3] hw state readout: disabled [ 5.002059] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A [ 5.002060] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 5.002061] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 5.002062] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.002063] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.002064] [drm:intel_dump_pipe_config] requested mode: [ 5.002066] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 5.002067] [drm:intel_dump_pipe_config] adjusted mode: [ 5.002068] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 5.002070] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x0 flags: 0x5 [ 5.002071] [drm:intel_dump_pipe_config] port clock: 148500 [ 5.002072] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 5.002073] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.002074] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 5.002075] [drm:intel_dump_pipe_config] ips: 0 [ 5.002075] [drm:intel_dump_pipe_config] double wide: 0 [ 5.002077] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B [ 5.002078] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 5.002079] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 5.002080] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.002081] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.002082] [drm:intel_dump_pipe_config] requested mode: [ 5.002083] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.002084] [drm:intel_dump_pipe_config] adjusted mode: [ 5.002085] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.002086] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 5.002087] [drm:intel_dump_pipe_config] port clock: 0 [ 5.002088] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 5.002089] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.002090] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.002090] [drm:intel_dump_pipe_config] ips: 0 [ 5.002091] [drm:intel_dump_pipe_config] double wide: 0 [ 5.002092] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C [ 5.002093] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 5.002094] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 5.002095] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.002096] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.002097] [drm:intel_dump_pipe_config] requested mode: [ 5.002098] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.002099] [drm:intel_dump_pipe_config] adjusted mode: [ 5.002100] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.002101] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 5.002102] [drm:intel_dump_pipe_config] port clock: 0 [ 5.002103] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 5.002104] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.002105] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.002105] [drm:intel_dump_pipe_config] ips: 0 [ 5.002106] [drm:intel_dump_pipe_config] double wide: 0 [ 5.002111] [drm:intel_connector_check_state] [CONNECTOR:21:HDMI-A-2] [ 5.002113] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 5.002114] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 5.002115] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 5.002117] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 5.002118] [drm:check_crtc_state] [CRTC:5] [ 5.002122] [drm:check_crtc_state] [CRTC:8] [ 5.002123] [drm:check_crtc_state] [CRTC:11] [ 5.002127] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 5.002129] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 5.002131] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 5.002135] [drm:intel_alloc_plane_obj] plane fb obj ffff88009e048180 [ 5.002137] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 5.002138] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, 7ffff000] [ 5.003468] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0 [ 5.003470] [drm:i915_gem_context_init] HW context support initialized [ 5.003475] [drm:init_status_page] render ring hws offset: 0x7fff0000 [ 5.005036] [drm:init_pipe_control] render ring pipe control offset: 0x0081a000 [ 5.005043] [drm:init_status_page] bsd ring hws offset: 0x0081b000 [ 5.005088] [drm:init_status_page] blitter ring hws offset: 0x0083c000 [ 5.005130] [drm:init_status_page] video enhancement ring hws offset: 0x0085d000 [ 5.005313] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:VGA-1] [ 5.005314] [drm:intel_crt_detect] [CONNECTOR:13:VGA-1] force=1 [ 5.005317] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 5.015039] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 5.015042] [drm:intel_crt_detect] CRT not detected via hotplug [ 5.015251] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 5.015255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 5.015256] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.015257] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.015638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 5.015639] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.015640] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 5.015643] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:VGA-1] disconnected [ 5.015645] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:DP-1] [ 5.015647] [drm:intel_dp_detect] [CONNECTOR:16:DP-1] [ 5.015650] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:DP-1] disconnected [ 5.015651] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] [ 5.015652] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 5.015804] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 5.015805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 5.015806] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected [ 5.015807] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] [ 5.015808] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 5.042757] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 5.069770] [drm:drm_edid_to_eld] ELD monitor HP 2309 [ 5.069773] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 5.069774] [drm:drm_edid_to_eld] ELD size 8, SAD count 1 [ 5.069785] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] probed modes : [ 5.069788] [drm:drm_mode_debug_printmodeline] Modeline 27:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.069789] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 5.069791] [drm:drm_mode_debug_printmodeline] Modeline 47:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 5.069793] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 5.069795] [drm:drm_mode_debug_printmodeline] Modeline 36:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 5.069797] [drm:drm_mode_debug_printmodeline] Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.069799] [drm:drm_mode_debug_printmodeline] Modeline 34:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 5.069800] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 5.069802] [drm:drm_mode_debug_printmodeline] Modeline 28:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 5.069804] [drm:drm_mode_debug_printmodeline] Modeline 49:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 5.069806] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 5.069808] [drm:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.069810] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 5.069811] [drm:drm_mode_debug_printmodeline] Modeline 31:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 5.069813] [drm:drm_mode_debug_printmodeline] Modeline 50:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 5.069815] [drm:drm_mode_debug_printmodeline] Modeline 30:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 5.069817] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 5.069818] [drm:drm_mode_debug_printmodeline] Modeline 41:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 5.069820] [drm:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 5.069822] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] [ 5.069825] [drm:intel_dp_detect] [CONNECTOR:23:DP-2] [ 5.069828] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected [ 5.069829] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:HDMI-A-3] [ 5.069830] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-3] [ 5.075125] usb 3-4: new low-speed USB device number 3 using xhci_hcd [ 5.120119] [drm] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 [ 5.128102] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 5.128106] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:HDMI-A-3] disconnected [ 5.128108] [drm:drm_setup_crtcs] [ 5.128109] [drm:drm_enable_connectors] connector 13 enabled? no [ 5.128110] [drm:drm_enable_connectors] connector 16 enabled? no [ 5.128111] [drm:drm_enable_connectors] connector 19 enabled? no [ 5.128112] [drm:drm_enable_connectors] connector 21 enabled? yes [ 5.128113] [drm:drm_enable_connectors] connector 23 enabled? no [ 5.128114] [drm:drm_enable_connectors] connector 24 enabled? no [ 5.128116] [drm:intel_fb_initial_config] connector 13 not enabled, skipping [ 5.128116] [drm:intel_fb_initial_config] connector 16 not enabled, skipping [ 5.128117] [drm:intel_fb_initial_config] connector 19 not enabled, skipping [ 5.128118] [drm:intel_fb_initial_config] looking for cmdline mode on connector 21 [ 5.128119] [drm:intel_fb_initial_config] looking for preferred mode on connector 21 [ 5.128121] [drm:intel_fb_initial_config] connector HDMI-A-2 on crtc 5: 1920x1080 [ 5.128121] [drm:intel_fb_initial_config] connector 23 not enabled, skipping [ 5.128122] [drm:intel_fb_initial_config] connector 24 not enabled, skipping [ 5.128123] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5 [ 5.128126] [drm:intelfb_create] no BIOS fb, allocating a new one [ 5.128128] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 5.128130] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400 [ 5.128815] [drm:intelfb_create] allocated 1920x1080 fb: 0x0087e000, bo ffff88009e08e600 [ 5.128941] fbcon: inteldrmfb (fb0) is primary device [ 5.128967] [drm:intel_crtc_cursor_set] cursor off [ 5.128968] [drm:intel_crtc_set_config] [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 5.128969] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 5.128971] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.128972] [drm:drm_mode_debug_printmodeline] Modeline 42:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.128973] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 5.128974] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.128976] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 5.128977] [drm:connected_sink_compute_bpp] [CONNECTOR:21:HDMI-A-2] checking for sink bpp constrains [ 5.128979] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output [ 5.128979] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI [ 5.128980] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 5.128981] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 5.128981] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 5.128982] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 5.128983] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.128984] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.128984] [drm:intel_dump_pipe_config] requested mode: [ 5.128985] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.128986] [drm:intel_dump_pipe_config] adjusted mode: [ 5.128987] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.128988] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 5.128988] [drm:intel_dump_pipe_config] port clock: 148500 [ 5.128989] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 5.128990] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.128990] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.128991] [drm:intel_dump_pipe_config] ips: 0 [ 5.128991] [drm:intel_dump_pipe_config] double wide: 0 [ 5.160158] [drm:intel_update_fbc] no output, disabling [ 5.160165] [drm:intel_ddi_put_crtc_pll] Disabling WRPLL 1 [ 5.160986] [drm:intel_ddi_pll_select] Using WRPLL 1 on pipe A [ 5.160987] [drm:intel_ddi_pll_select] WRPLL: 148500KHz refresh rate with p=6, n2=33 r2=20 [ 5.161842] [drm:ironlake_update_primary_plane] Writing base 0087E000 00000000 0 0 7680 [ 5.161845] [drm:intel_crtc_mode_set] [ENCODER:20:TMDS-20] set [MODE:0:1920x1080] [ 5.161846] [drm:intel_ddi_mode_set] Preparing DDI mode on port C, pipe A [ 5.161847] [drm:intel_ddi_mode_set] HDMI audio on pipe A on DDI [ 5.161847] [drm:intel_ddi_mode_set] HDMI audio: write eld information [ 5.161848] [drm:intel_write_eld] ELD on [CONNECTOR:21:HDMI-A-2], [ENCODER:20:TMDS-20] [ 5.161849] [drm:haswell_write_eld] HDMI audio: enable codec [ 5.161851] [drm:haswell_write_eld] HDMI audio: pin eld vld status=0x00000004 [ 5.161852] [drm:haswell_write_eld] HDMI audio: eld vld status=0x00000005 [ 5.161852] [drm:haswell_write_eld] HDMI audio: audio conf: 0x0070fa60 [ 5.161853] [drm:haswell_write_eld] ELD on pipe A [ 5.161854] [drm:audio_config_hdmi_pixel_clock] Configuring HDMI audio for pixel clock 148500 (0x00090000) [ 5.161856] [drm:haswell_write_eld] port num:0 [ 5.161857] [drm:haswell_write_eld] ELD size 8 [ 5.179186] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 5.179192] [drm:intel_connector_check_state] [CONNECTOR:21:HDMI-A-2] [ 5.179195] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 5.179196] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 5.179197] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 5.179197] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 5.179199] [drm:check_crtc_state] [CRTC:5] [ 5.179203] [drm:check_crtc_state] [CRTC:8] [ 5.179205] [drm:check_crtc_state] [CRTC:11] [ 5.179208] [drm:intel_crtc_cursor_set] cursor off [ 5.179209] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 5.179210] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 5.179211] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.179212] [drm:intel_crtc_cursor_set] cursor off [ 5.179212] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 5.179213] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 5.179214] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.179217] Console: switching to colour frame buffer device 240x67 [ 5.179223] [drm:intel_crtc_set_config] [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 5.179224] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 5.179225] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.183295] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.183314] i915 0000:00:02.0: registered panic notifier [ 5.188957] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.189209] [drm:asle_set_backlight] bclp = 0x80000002 [ 5.189211] [drm:asle_set_backlight] updating opregion backlight 2/255 [ 5.189271] [drm:asle_set_backlight] bclp = 0x800000ff [ 5.189272] [drm:asle_set_backlight] updating opregion backlight 255/255 [ 5.189338] acpi device:5d: registered as cooling_device9 [ 5.189410] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 5.189529] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.191858] dracut: Starting plymouth daemon [ 5.196094] [drm:intel_crtc_set_config] [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 5.196096] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 5.196098] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.201754] [drm:i915_gem_open] [ 5.201768] [drm:intel_crtc_cursor_set] cursor off [ 5.201770] [drm:intel_crtc_set_config] [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 5.201772] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 5.201774] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.201775] [drm:intel_crtc_cursor_set] cursor off [ 5.201776] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 5.201777] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 5.201778] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.201779] [drm:intel_crtc_cursor_set] cursor off [ 5.201780] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 5.201781] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 5.201782] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.201787] [drm:i915_gem_open] [ 5.201792] [drm:intel_crtc_cursor_set] cursor off [ 5.201793] [drm:intel_crtc_set_config] [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 5.201794] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 5.201796] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.201796] [drm:intel_crtc_cursor_set] cursor off [ 5.201797] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 5.201798] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 5.201799] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.201800] [drm:intel_crtc_cursor_set] cursor off [ 5.201801] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 5.201802] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 5.201803] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 5.201806] [drm:i915_gem_open] [ 5.201833] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[4] [ 5.201835] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[4] [ 5.201839] [drm:drm_mode_getconnector] [CONNECTOR:13:?] [ 5.201841] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:VGA-1] [ 5.201842] [drm:intel_crt_detect] [CONNECTOR:13:VGA-1] force=1 [ 5.201846] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 5.201846] [drm:intel_crt_detect] CRT not detected via hotplug [ 5.202011] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 5.202013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 5.202015] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.202016] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.202399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 5.202400] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.202401] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 5.202403] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:VGA-1] disconnected [ 5.202406] [drm:drm_mode_getconnector] [CONNECTOR:13:?] [ 5.202407] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:VGA-1] [ 5.202408] [drm:intel_crt_detect] [CONNECTOR:13:VGA-1] force=1 [ 5.202411] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 5.202411] [drm:intel_crt_detect] CRT not detected via hotplug [ 5.202563] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 5.202564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 5.202565] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.202565] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.202944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 5.202945] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.202946] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 5.202947] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:13:VGA-1] disconnected [ 5.202949] [drm:drm_mode_getconnector] [CONNECTOR:16:?] [ 5.202950] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:DP-1] [ 5.202952] [drm:intel_dp_detect] [CONNECTOR:16:DP-1] [ 5.202955] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:DP-1] disconnected [ 5.202956] [drm:drm_mode_getconnector] [CONNECTOR:16:?] [ 5.202957] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:DP-1] [ 5.202958] [drm:intel_dp_detect] [CONNECTOR:16:DP-1] [ 5.202959] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:DP-1] disconnected [ 5.202961] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 5.202962] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] [ 5.202963] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 5.203121] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 5.203122] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 5.203124] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected [ 5.203125] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 5.203126] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] [ 5.203126] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 5.203321] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 5.203323] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 5.203326] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected [ 5.203331] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 5.203333] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] [ 5.203335] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 5.230265] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 5.255957] usb 3-4: New USB device found, idVendor=03f0, idProduct=0024 [ 5.255983] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.256008] usb 3-4: Product: HP Basic USB Keyboard [ 5.256025] usb 3-4: Manufacturer: CHICONY [ 5.256128] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5.257157] [drm:drm_edid_to_eld] ELD monitor HP 2309 [ 5.257159] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 5.257160] [drm:drm_edid_to_eld] ELD size 8, SAD count 1 [ 5.257173] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] probed modes : [ 5.257175] [drm:drm_mode_debug_printmodeline] Modeline 27:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 5.257176] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 5.257178] [drm:drm_mode_debug_printmodeline] Modeline 47:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 5.257182] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 5.257184] [drm:drm_mode_debug_printmodeline] Modeline 36:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 5.257185] [drm:drm_mode_debug_printmodeline] Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.257187] [drm:drm_mode_debug_printmodeline] Modeline 34:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 5.257188] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 5.257190] [drm:drm_mode_debug_printmodeline] Modeline 28:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 5.257191] [drm:drm_mode_debug_printmodeline] Modeline 49:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 5.257192] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 5.257194] [drm:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.257195] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 5.257197] [drm:drm_mode_debug_printmodeline] Modeline 31:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 5.257198] [drm:drm_mode_debug_printmodeline] Modeline 50:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 5.257200] [drm:drm_mode_debug_printmodeline] Modeline 30:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 5.257201] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 5.257202] [drm:drm_mode_debug_printmodeline] Modeline 41:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 5.257204] [drm:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 5.257210] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 5.260490] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 5.260492] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] [ 5.260495] [drm:intel_dp_detect] [CONNECTOR:23:DP-2] [ 5.260498] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected [ 5.260500] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 5.260501] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] [ 5.260502] [drm:intel_dp_detect] [CONNECTOR:23:DP-2] [ 5.260504] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-2] disconnected [ 5.260506] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 5.260507] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:HDMI-A-3] [ 5.260508] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-3] [ 5.263787] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:03F0:0024.0002/input/input6 [ 5.263922] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-4/input0 [ 5.268209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 5.268210] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:HDMI-A-3] disconnected [ 5.268212] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 5.268213] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:HDMI-A-3] [ 5.268213] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-3] [ 5.276218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 5.276219] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:HDMI-A-3] disconnected [ 5.308598] ACPI: AC Adapter [ADP1] (off-line) [ 5.315036] ACPI: Battery Slot [BAT0] (battery present) [ 5.315080] ACPI: Battery Slot [BAT1] (battery absent) [ 5.315155] ACPI: Battery Slot [BAT2] (battery absent) [ 5.320500] snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X [ 5.320533] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 5.324058] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258) [ 5.324115] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.324278] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 5.332310] sound hdaudioC1D2: ALC889: SKU not ready 0x598301f0 [ 5.332683] sound hdaudioC1D2: autoconfig: line_outs=3 (0x14/0x19/0x16/0x0/0x0) type:line [ 5.332711] sound hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.332733] sound hdaudioC1D2: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 5.332754] sound hdaudioC1D2: mono: mono_out=0x0 [ 5.332771] sound hdaudioC1D2: dig-out=0x1e/0x0 [ 5.332788] sound hdaudioC1D2: inputs: [ 5.332802] sound hdaudioC1D2: Front Mic=0x18 [ 5.332817] sound hdaudioC1D2: Rear Mic=0x1b [ 5.332834] sound hdaudioC1D2: Line=0x1a [ 5.343917] iTCO_vendor_support: vendor-support=0 [ 5.344126] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 5.344166] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 5.344279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.345127] ppdev: user-space parallel port driver [ 5.347897] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.364399] dracut: Checking ext4: /dev/sda2 [ 5.364497] dracut: issuing e2fsck -a /dev/sda2 [ 5.369070] dracut: /dev/sda2: clean, 794111/14409728 files, 45895042/57607666 blocks [ 5.369364] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro [ 5.373858] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 5.377529] dracut: Mounted root filesystem /dev/sda2 [ 5.386253] device-mapper: uevent: version 1.0.3 [ 5.387316] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 5.402257] dracut: Switching root [ 5.425960] random: init urandom read with 89 bits of entropy available [ 5.538950] systemd-udevd[2865]: starting version 204 [ 5.605786] systemd-udevd[2924]: could not open moddep file '/lib/modules/3.15.0-rc3_drm-intel-next-queued_1cf0ba_20140512+/modules.dep.bin' [ 5.687700] Adding 3998716k swap on /dev/sda1. Priority:-1 extents:1 across:3998716k SS [ 5.695600] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 5.738903] random: nonblocking pool is initialized [ 5.764581] init: bluetooth main process (3724) terminated with status 1 [ 5.764599] init: bluetooth main process ended, respawning [ 5.768312] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 5.792847] init: avahi-cups-reload main process (3751) terminated with status 1 [ 5.794238] init: bluetooth main process (3778) terminated with status 1 [ 5.794249] init: bluetooth main process ended, respawning [ 5.809479] init: bluetooth main process (3809) terminated with status 1 [ 5.809490] init: bluetooth main process ended, respawning [ 5.818050] init: bluetooth main process (3838) terminated with status 1 [ 5.818061] init: bluetooth main process ended, respawning [ 5.827915] init: bluetooth main process (3862) terminated with status 1 [ 5.827927] init: bluetooth main process ended, respawning [ 5.838077] init: bluetooth main process (3886) terminated with status 1 [ 5.838088] init: bluetooth main process ended, respawning [ 5.846315] init: bluetooth main process (3911) terminated with status 1 [ 5.846325] init: bluetooth main process ended, respawning [ 5.855647] init: bluetooth main process (3935) terminated with status 1 [ 5.855657] init: bluetooth main process ended, respawning [ 5.864424] init: bluetooth main process (3959) terminated with status 1 [ 5.864435] init: bluetooth main process ended, respawning [ 5.868710] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 5.893381] init: bluetooth main process (3984) terminated with status 1 [ 5.893393] init: bluetooth main process ended, respawning [ 5.910689] init: bluetooth main process (4050) terminated with status 1 [ 5.910700] init: bluetooth respawning too fast, stopped [ 5.957915] WARNING! power/level is deprecated; use power/control instead [ 6.711523] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 6.715393] [drm:gen6_enable_rps] Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz [ 7.377547] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 7.377551] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 8.537176] init: failsafe main process (3995) killed by TERM signal [ 8.750842] [drm:intel_crtc_cursor_set] cursor off [ 8.750846] [drm:intel_crtc_set_config] [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 8.750849] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 8.750851] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 8.750853] [drm:intel_crtc_cursor_set] cursor off [ 8.750854] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 8.750855] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 8.750856] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 8.750857] [drm:intel_crtc_cursor_set] cursor off [ 8.750858] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 8.750859] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 8.750860] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 8.755977] init: lightdm main process (4448) terminated with status 1 [ 8.758015] init: plymouth-ready (startup) main process (2739) terminated with status 1 [ 13.701669] init: failsafe-x main process (4548) terminated with status 127 [ 182.017491] [drm:i915_gem_open] [ 182.017508] [drm:intel_crtc_cursor_set] cursor off [ 182.017510] [drm:intel_crtc_set_config] [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 182.017513] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 182.017514] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 182.017516] [drm:intel_crtc_cursor_set] cursor off [ 182.017517] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 182.017518] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 182.017519] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 182.017520] [drm:intel_crtc_cursor_set] cursor off [ 182.017521] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 182.017522] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 182.017523] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 182.017529] [drm:i915_gem_open] [ 182.017792] [drm:i915_gem_open] [ 182.017807] [drm:i915_gem_open] [ 182.017848] [drm:check_cmd] CMD: Rejected command: 0x01079000 [ 182.017990] [drm:intel_crtc_cursor_set] cursor off [ 182.017993] [drm:intel_crtc_set_config] [CRTC:5] [FB:43] #connectors=1 (x y) (0 0) [ 182.017994] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 182.017996] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 182.017997] [drm:intel_crtc_cursor_set] cursor off [ 182.017998] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 182.017999] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 182.018000] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [ 182.018001] [drm:intel_crtc_cursor_set] cursor off [ 182.018002] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 182.018003] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 182.018004] [drm:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5]