[ 306.125259] [drm:intel_runtime_resume] Device resumed [ 306.125267] [drm:intel_display_power_get] enabling display [ 306.133152] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 306.137007] [drm:intel_display_power_get] enabling dpio-common [ 306.149175] [drm:intel_display_power_get] enabling dpio-tx-b-01 [ 306.161198] [drm:intel_display_power_get] enabling dpio-tx-b-23 [ 306.173220] [drm:intel_display_power_get] enabling dpio-tx-c-01 [ 306.185245] [drm:intel_display_power_get] enabling dpio-tx-c-23 [ 306.197271] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 306.245362] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 306.245368] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 306.484154] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000 [ 306.484174] [drm:wait_panel_status] Wait complete [ 306.484196] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 306.484209] [drm:_edp_panel_vdd_on] eDP was not running [ 306.733613] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 306.785710] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 306.837810] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 306.889914] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 306.942018] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 306.994116] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 307.019890] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 307.044081] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 307.044086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 307.337207] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 307.338347] [drm:valleyview_enable_rps] GPLL enabled? yes [ 307.338352] [drm:valleyview_enable_rps] GPU status: 0x0000c090 [ 307.338356] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192) [ 307.338359] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 307.338363] [drm:valleyview_set_rps] GPU freq request from 200 MHz (192) to 400 MHz (201) [ 308.252266] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 308.252278] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 308.252283] [drm:intel_display_power_put] disabling dpio-tx-c-23 [ 308.264285] [drm:intel_display_power_put] disabling dpio-tx-c-01 [ 308.276308] [drm:intel_display_power_put] disabling dpio-tx-b-23 [ 308.288331] [drm:intel_display_power_put] disabling dpio-tx-b-01 [ 308.300355] [drm:intel_display_power_put] disabling dpio-common [ 308.312380] [drm:intel_display_power_put] disabling display [ 308.324409] [drm:intel_runtime_suspend] Suspending device [ 308.326301] [drm:intel_runtime_suspend] Device suspended [ 308.421160] [drm:intel_runtime_resume] Resuming device [ 308.424600] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 308.428605] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 308.428712] [drm:intel_runtime_resume] Device resumed [ 310.338633] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 310.338664] [drm:valleyview_enable_rps] GPLL enabled? yes [ 310.338677] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 310.338680] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 310.338684] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 310.338688] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 310.652944] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 378 MHz (200) [ 310.967229] [drm:valleyview_set_rps] GPU freq request from 378 MHz (200) to 333 MHz (198) [ 311.281989] [drm:valleyview_set_rps] GPU freq request from 333 MHz (198) to 244 MHz (194) [ 311.596322] [drm:valleyview_set_rps] GPU freq request from 244 MHz (194) to 178 MHz (191) [ 318.448426] [drm:intel_runtime_suspend] Suspending device [ 318.448440] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 318.454041] [drm:intel_runtime_suspend] Device suspended [ 318.549261] [drm:intel_crtc_cursor_set] cursor off [ 318.549266] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 318.549271] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 318.549273] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0 [ 318.549274] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 318.549277] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 318.549279] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 318.549281] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 318.549284] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 318.549287] [drm:connected_sink_compute_bpp] [CONNECTOR:23:eDP-1] checking for sink bpp constrains [ 318.549292] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 318.549294] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 318.549295] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 318.549304] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 318.549306] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 318.549309] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 318.549311] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 318.549312] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 318.549313] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 318.549316] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 318.549318] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 318.549319] [drm:intel_dump_pipe_config] requested mode: [ 318.549323] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 318.549324] [drm:intel_dump_pipe_config] adjusted mode: [ 318.549328] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 318.549331] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 318.549332] [drm:intel_dump_pipe_config] port clock: 270000 [ 318.549333] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 318.549335] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 318.549337] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 318.549338] [drm:intel_dump_pipe_config] ips: 0 [ 318.549339] [drm:intel_dump_pipe_config] double wide: 0 [ 318.560247] [drm:intel_runtime_resume] Resuming device [ 318.568394] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 318.568534] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz [ 318.568534] [drm:intel_runtime_resume] Device resumed [ 318.568537] [drm:intel_display_power_get] enabling display [ 318.576419] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 318.588431] [drm:intel_display_power_get] enabling dpio-common [ 318.600454] [drm:intel_display_power_get] enabling dpio-tx-b-01 [ 318.612477] [drm:intel_display_power_get] enabling dpio-tx-b-23 [ 318.624499] [drm:intel_display_power_get] enabling dpio-tx-c-01 [ 318.636521] [drm:intel_display_power_get] enabling dpio-tx-c-23 [ 318.670599] [drm:i9xx_update_primary_plane] Writing base 00855000 00000000 0 0 7680 [ 318.670603] [drm:intel_edp_psr_match_conditions] PSR not supported on this platform [ 318.670607] [drm:intel_crtc_mode_set] [ENCODER:22:TMDS-22] set [MODE:0:1920x1080] [ 318.692631] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000 [ 318.692634] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 318.692636] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 318.692638] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 318.692643] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05 [ 318.740717] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 318.740719] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 318.740723] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 319.071679] [drm:wait_panel_status] Wait complete [ 319.071695] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 319.071700] [drm:_edp_panel_vdd_on] eDP was not running [ 319.103156] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 319.103164] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 319.429063] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 319.525278] [drm:intel_dp_start_link_train] clock recovery OK [ 319.525280] [drm:intel_edp_panel_on] Turn eDP power on [ 319.525282] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 319.525286] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 319.525287] [drm:wait_panel_status] Wait complete [ 319.525289] [drm:wait_panel_on] Wait for panel power on [ 319.525292] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 319.679543] [drm:wait_panel_status] Wait complete [ 319.703594] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 319.703599] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 319.775748] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 319.775753] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 319.799969] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 319.824028] [drm:g4x_check_srwm] SR watermark: display plane 107, cursor 2 [ 319.824030] [drm:g4x_check_srwm] SR watermark: display plane 211, cursor 2 [ 319.824033] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=61, cursor=2, B: plane=2, cursor=2, SR: plane=107, cursor=2 [ 319.824041] [drm:intel_edp_backlight_on] [ 319.824044] [drm:intel_panel_enable_backlight] pipe A [ 319.824047] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812 [ 319.865765] [drm:intel_connector_check_state] [CONNECTOR:23:eDP-1] [ 319.970123] [drm:check_encoder_state] [ENCODER:13:DAC-13] [ 319.978137] [drm:check_encoder_state] [ENCODER:14:TMDS-14] [ 320.002182] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 320.026227] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 320.050271] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 320.074317] [drm:check_crtc_state] [CRTC:5] [ 320.104378] [drm:check_crtc_state] [CRTC:9] [ 320.108384] [drm:intel_crtc_cursor_set] cursor off [ 320.108387] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 320.108390] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 320.108393] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 320.108403] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 320.108405] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 320.108407] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 320.156728] [drm:intel_dp_get_dpcd] DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 320.180671] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 320.252652] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 320.300909] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 320.325021] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 320.348840] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 320.373152] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 320.373161] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 320.373164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 320.374963] [drm:valleyview_enable_rps] GPLL enabled? yes [ 320.374965] [drm:valleyview_enable_rps] GPU status: 0x0000c090 [ 320.374967] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192) [ 320.374968] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 320.374971] [drm:valleyview_set_rps] GPU freq request from 200 MHz (192) to 400 MHz (201) [ 320.401026] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 320.401030] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 320.401033] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 320.401052] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 320.401054] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 320.401057] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 320.416895] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 755 MHz (217) [ 320.419002] [drm:intel_crtc_cursor_set] cursor off [ 320.419009] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 320.419015] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 320.419020] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 320.419024] [drm:intel_crtc_cursor_set] cursor off [ 320.419027] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 320.419031] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 320.419035] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 322.311665] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 322.311675] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 358.988704] [drm:i915_gem_open] [ 358.988763] [drm:intel_crtc_cursor_set] cursor off [ 358.988770] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 358.988777] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 358.988783] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 358.988787] [drm:intel_crtc_cursor_set] cursor off [ 358.988791] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 358.988795] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 358.988799] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 358.988820] [drm:i915_gem_open] [ 358.988979] [drm:valleyview_set_rps] GPU freq request from 178 MHz (191) to 755 MHz (217) [ 358.990091] [drm:i915_gem_open] [ 358.990128] [drm:i915_gem_open] [ 358.990150] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 358.990173] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 358.990190] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 358.990196] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:eDP-1] [ 359.014193] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 359.062283] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 359.062291] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 359.086571] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 359.110696] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 359.164561] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 359.188605] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:eDP-1] probed modes : [ 359.188613] [drm:drm_mode_debug_printmodeline] Modeline 24:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 359.188625] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 359.188689] [drm:drm_mode_getconnector] [CONNECTOR:12:?] [ 359.188695] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] [ 359.188699] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1 [ 359.196613] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000 [ 359.200618] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0 [ 359.200623] [drm:intel_crt_detect] CRT not detected via hotplug [ 359.200776] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 359.200780] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 359.200783] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 359.200787] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 359.202701] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 359.202706] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 359.202709] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 359.210636] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] disconnected [ 359.210645] [drm:drm_mode_getconnector] [CONNECTOR:12:?] [ 359.210649] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] [ 359.210653] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1 [ 359.218653] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000 [ 359.222659] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0 [ 359.222664] [drm:intel_crt_detect] CRT not detected via hotplug [ 359.222814] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 359.222818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 359.222821] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 359.222825] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 359.224746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 359.224751] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 359.224754] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 359.232486] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] disconnected [ 359.232512] [drm:drm_mode_getconnector] [CONNECTOR:15:?] [ 359.232517] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] [ 359.232521] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] [ 359.256869] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 359.256875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 359.280770] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected [ 359.280779] [drm:drm_mode_getconnector] [CONNECTOR:15:?] [ 359.280783] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] [ 359.280787] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] [ 359.304960] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 359.304965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 359.328859] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected [ 359.328889] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 359.328895] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] [ 359.352905] [drm:intel_dp_detect] [CONNECTOR:19:DP-1] [ 359.376766] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected [ 359.376774] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 359.376779] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] [ 359.400994] [drm:intel_dp_detect] [CONNECTOR:19:DP-1] [ 359.425040] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected [ 359.425068] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 359.425074] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] [ 359.425077] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 359.449230] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 359.449235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 359.473130] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] disconnected [ 359.473138] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 359.473142] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] [ 359.473146] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 359.497319] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 359.497324] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 359.521220] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] disconnected [ 359.521582] [drm:drm_mode_setcrtc] [CRTC:5] [ 359.521587] [drm:intel_crtc_set_config] [CRTC:5] [NOFB] [ 359.521593] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0 [ 359.521597] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [NOCRTC] [ 359.521600] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 359.521604] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 359.521607] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 359.521612] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [ 359.559291] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 359.559297] [drm:intel_edp_backlight_off] [ 359.583556] [drm:intel_edp_panel_off] Turn eDP power off [ 359.760843] [drm:wait_panel_off] Wait for panel power off time [ 359.760853] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 359.802459] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 359.802483] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 359.804598] [drm:wait_panel_status] Wait complete [ 359.834792] [drm:intel_dp_link_down] [ 359.887916] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 359.899929] [drm:intel_display_power_put] disabling dpio-tx-c-23 [ 359.911951] [drm:intel_display_power_put] disabling dpio-tx-c-01 [ 359.923976] [drm:intel_display_power_put] disabling dpio-tx-b-23 [ 359.935999] [drm:intel_display_power_put] disabling dpio-tx-b-01 [ 359.948022] [drm:intel_display_power_put] disabling dpio-common [ 359.960044] [drm:intel_display_power_put] disabling display [ 359.972082] [drm:intel_runtime_suspend] Suspending device [ 359.973959] [drm:intel_runtime_suspend] Device suspended [ 359.974041] ------------[ cut here ]------------ [ 359.974072] WARNING: CPU: 1 PID: 3936 at drivers/gpu/drm/i915/intel_uncore.c:47 vlv_read32+0x17/0xee [i915]() [ 359.974075] Device suspended [ 359.974077] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support serio_raw pcspkr i2c_i801 lpc_ich mfd_core snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore battery ac acpi_cpufreq i915 video button drm_kms_helper drm [ 359.974105] CPU: 1 PID: 3936 Comm: pm_pc8 Tainted: G W 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ #2606 [ 359.974108] 0000000000000000 0000000000000009 ffffffff81723497 ffff88007198da38 [ 359.974113] ffffffff8103516a 0000000000000000 ffffffffa008efb0 0000000000000286 [ 359.974118] ffff880002da0000 0000000000182100 000000010000e76f ffff880002da0070 [ 359.974123] Call Trace: [ 359.974132] [] ? dump_stack+0x41/0x51 [ 359.974139] [] ? warn_slowpath_common+0x73/0x8b [ 359.974159] [] ? vlv_read32+0x17/0xee [i915] [ 359.974164] [] ? warn_slowpath_fmt+0x45/0x4a [ 359.974185] [] ? vlv_read32+0x17/0xee [i915] [ 359.974206] [] ? vlv_sideband_rw+0x1bb/0x2bb [i915] [ 359.974227] [] ? vlv_punit_read+0x60/0x75 [i915] [ 359.974242] [] ? vlv_power_well_enabled+0x34/0x91 [i915] [ 359.974259] [] ? intel_display_power_enabled+0x58/0x8b [i915] [ 359.974278] [] ? intel_dp_get_hw_state+0x2f/0x139 [i915] [ 359.974299] [] ? __intel_set_mode+0x10d4/0x1195 [i915] [ 359.974320] [] ? intel_connector_get_hw_state+0x21/0x26 [i915] [ 359.974341] [] ? intel_modeset_check_state+0x26/0x5f3 [i915] [ 359.974362] [] ? intel_set_mode+0x1d/0x27 [i915] [ 359.974383] [] ? intel_crtc_set_config+0x715/0xa17 [i915] [ 359.974396] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.974408] [] ? drm_mode_set_config_internal+0x48/0xad [drm] [ 359.974419] [] ? drm_mode_setcrtc+0x3f2/0x490 [drm] [ 359.974429] [] ? drm_ioctl+0x25c/0x3ad [drm] [ 359.974440] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.974448] [] ? do_vfs_ioctl+0x3ec/0x435 [ 359.974453] [] ? dentry_kill+0x1c0/0x1dc [ 359.974458] [] ? task_work_run+0x78/0x87 [ 359.974464] [] ? SyS_ioctl+0x49/0x78 [ 359.974469] [] ? int_signal+0x12/0x17 [ 359.974474] [] ? system_call_fastpath+0x16/0x1b [ 359.974478] ---[ end trace ae43ead642b73c95 ]--- [ 359.974481] ------------[ cut here ]------------ [ 359.974500] WARNING: CPU: 1 PID: 3936 at drivers/gpu/drm/i915/intel_uncore.c:47 vlv_read32+0x17/0xee [i915]() [ 359.974502] Device suspended [ 359.974504] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support serio_raw pcspkr i2c_i801 lpc_ich mfd_core snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore battery ac acpi_cpufreq i915 video button drm_kms_helper drm [ 359.974529] CPU: 1 PID: 3936 Comm: pm_pc8 Tainted: G W 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ #2606 [ 359.974531] 0000000000000000 0000000000000009 ffffffff81723497 ffff88007198da38 [ 359.974536] ffffffff8103516a 0000000000000000 ffffffffa008efb0 0000000000000286 [ 359.974540] ffff880002da0000 0000000000182104 000000010000e76f ffff880002da0070 [ 359.974544] Call Trace: [ 359.974550] [] ? dump_stack+0x41/0x51 [ 359.974555] [] ? warn_slowpath_common+0x73/0x8b [ 359.974574] [] ? vlv_read32+0x17/0xee [i915] [ 359.974579] [] ? warn_slowpath_fmt+0x45/0x4a [ 359.974600] [] ? vlv_read32+0x17/0xee [i915] [ 359.974620] [] ? vlv_sideband_rw+0x206/0x2bb [i915] [ 359.974641] [] ? vlv_punit_read+0x60/0x75 [i915] [ 359.974656] [] ? vlv_power_well_enabled+0x34/0x91 [i915] [ 359.974672] [] ? intel_display_power_enabled+0x58/0x8b [i915] [ 359.974692] [] ? intel_dp_get_hw_state+0x2f/0x139 [i915] [ 359.974712] [] ? __intel_set_mode+0x10d4/0x1195 [i915] [ 359.974733] [] ? intel_connector_get_hw_state+0x21/0x26 [i915] [ 359.974753] [] ? intel_modeset_check_state+0x26/0x5f3 [i915] [ 359.974774] [] ? intel_set_mode+0x1d/0x27 [i915] [ 359.974795] [] ? intel_crtc_set_config+0x715/0xa17 [i915] [ 359.974807] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.974819] [] ? drm_mode_set_config_internal+0x48/0xad [drm] [ 359.974830] [] ? drm_mode_setcrtc+0x3f2/0x490 [drm] [ 359.974839] [] ? drm_ioctl+0x25c/0x3ad [drm] [ 359.974850] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.974856] [] ? do_vfs_ioctl+0x3ec/0x435 [ 359.974861] [] ? dentry_kill+0x1c0/0x1dc [ 359.974866] [] ? task_work_run+0x78/0x87 [ 359.974872] [] ? SyS_ioctl+0x49/0x78 [ 359.974877] [] ? int_signal+0x12/0x17 [ 359.974882] [] ? system_call_fastpath+0x16/0x1b [ 359.974885] ---[ end trace ae43ead642b73c96 ]--- [ 359.974888] ------------[ cut here ]------------ [ 359.974907] WARNING: CPU: 1 PID: 3936 at drivers/gpu/drm/i915/intel_uncore.c:47 gen6_write32+0x1a/0x6b [i915]() [ 359.974909] Device suspended [ 359.974911] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support serio_raw pcspkr i2c_i801 lpc_ich mfd_core snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore battery ac acpi_cpufreq i915 video button drm_kms_helper drm [ 359.975045] CPU: 1 PID: 3936 Comm: pm_pc8 Tainted: G W 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ #2606 [ 359.975047] 0000000000000000 0000000000000009 ffffffff81723497 ffff88007198da38 [ 359.975052] ffffffff8103516a 0000000000000000 ffffffffa008f824 0000000000000286 [ 359.975056] ffff880002da0000 0000000000182104 ffff880002da0070 ffff88007198db24 [ 359.975061] Call Trace: [ 359.975066] [] ? dump_stack+0x41/0x51 [ 359.975071] [] ? warn_slowpath_common+0x73/0x8b [ 359.975092] [] ? gen6_write32+0x1a/0x6b [i915] [ 359.975097] [] ? warn_slowpath_fmt+0x45/0x4a [ 359.975117] [] ? gen6_write32+0x1a/0x6b [i915] [ 359.975138] [] ? vlv_sideband_rw+0x21f/0x2bb [i915] [ 359.975158] [] ? vlv_punit_read+0x60/0x75 [i915] [ 359.975173] [] ? vlv_power_well_enabled+0x34/0x91 [i915] [ 359.975189] [] ? intel_display_power_enabled+0x58/0x8b [i915] [ 359.975223] [] ? intel_dp_get_hw_state+0x2f/0x139 [i915] [ 359.975260] [] ? __intel_set_mode+0x10d4/0x1195 [i915] [ 359.975297] [] ? intel_connector_get_hw_state+0x21/0x26 [i915] [ 359.975334] [] ? intel_modeset_check_state+0x26/0x5f3 [i915] [ 359.975371] [] ? intel_set_mode+0x1d/0x27 [i915] [ 359.975403] [] ? intel_crtc_set_config+0x715/0xa17 [i915] [ 359.975415] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.975426] [] ? drm_mode_set_config_internal+0x48/0xad [drm] [ 359.975437] [] ? drm_mode_setcrtc+0x3f2/0x490 [drm] [ 359.975447] [] ? drm_ioctl+0x25c/0x3ad [drm] [ 359.975458] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.975464] [] ? do_vfs_ioctl+0x3ec/0x435 [ 359.975469] [] ? dentry_kill+0x1c0/0x1dc [ 359.975474] [] ? task_work_run+0x78/0x87 [ 359.975479] [] ? SyS_ioctl+0x49/0x78 [ 359.975484] [] ? int_signal+0x12/0x17 [ 359.975489] [] ? system_call_fastpath+0x16/0x1b [ 359.975492] ---[ end trace ae43ead642b73c97 ]--- [ 359.975495] ------------[ cut here ]------------ [ 359.975515] WARNING: CPU: 1 PID: 3936 at drivers/gpu/drm/i915/intel_uncore.c:47 vlv_read32+0x17/0xee [i915]() [ 359.975517] Device suspended [ 359.975519] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support serio_raw pcspkr i2c_i801 lpc_ich mfd_core snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore battery ac acpi_cpufreq i915 video button drm_kms_helper drm [ 359.975578] CPU: 1 PID: 3936 Comm: pm_pc8 Tainted: G W 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ #2606 [ 359.975581] 0000000000000000 0000000000000009 ffffffff81723497 ffff88007198da38 [ 359.975585] ffffffff8103516a 0000000000000000 ffffffffa008efb0 0000000000000286 [ 359.975590] ffff880002da0000 0000000000182100 0000000000000006 ffff880002da0070 [ 359.975594] Call Trace: [ 359.975599] [] ? dump_stack+0x41/0x51 [ 359.975604] [] ? warn_slowpath_common+0x73/0x8b [ 359.975624] [] ? vlv_read32+0x17/0xee [i915] [ 359.975629] [] ? warn_slowpath_fmt+0x45/0x4a [ 359.975659] [] ? vlv_read32+0x17/0xee [i915] [ 359.975688] [] ? vlv_sideband_rw+0xc5/0x2bb [i915] [ 359.975709] [] ? vlv_punit_read+0x60/0x75 [i915] [ 359.975729] [] ? vlv_power_well_enabled+0x51/0x91 [i915] [ 359.975745] [] ? intel_display_power_enabled+0x58/0x8b [i915] [ 359.975765] [] ? intel_dp_get_hw_state+0x2f/0x139 [i915] [ 359.975786] [] ? __intel_set_mode+0x10d4/0x1195 [i915] [ 359.975807] [] ? intel_connector_get_hw_state+0x21/0x26 [i915] [ 359.975827] [] ? intel_modeset_check_state+0x26/0x5f3 [i915] [ 359.975848] [] ? intel_set_mode+0x1d/0x27 [i915] [ 359.975869] [] ? intel_crtc_set_config+0x715/0xa17 [i915] [ 359.975881] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.975893] [] ? drm_mode_set_config_internal+0x48/0xad [drm] [ 359.975904] [] ? drm_mode_setcrtc+0x3f2/0x490 [drm] [ 359.975914] [] ? drm_ioctl+0x25c/0x3ad [drm] [ 359.975939] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.975962] [] ? do_vfs_ioctl+0x3ec/0x435 [ 359.975975] [] ? dentry_kill+0x1c0/0x1dc [ 359.975980] [] ? task_work_run+0x78/0x87 [ 359.975985] [] ? SyS_ioctl+0x49/0x78 [ 359.975991] [] ? int_signal+0x12/0x17 [ 359.975996] [] ? system_call_fastpath+0x16/0x1b [ 359.975999] ---[ end trace ae43ead642b73c98 ]--- [ 359.976002] ------------[ cut here ]------------ [ 359.976022] WARNING: CPU: 1 PID: 3936 at drivers/gpu/drm/i915/intel_uncore.c:47 gen6_write32+0x1a/0x6b [i915]() [ 359.976030] Device suspended [ 359.976042] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support serio_raw pcspkr i2c_i801 lpc_ich mfd_core snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore battery ac acpi_cpufreq i915 video button drm_kms_helper drm [ 359.976068] CPU: 1 PID: 3936 Comm: pm_pc8 Tainted: G W 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ #2606 [ 359.976071] 0000000000000000 0000000000000009 ffffffff81723497 ffff88007198da38 [ 359.976082] ffffffff8103516a 0000000000000000 ffffffffa008f824 0000000000000286 [ 359.976086] ffff880002da0000 0000000000182108 ffff880002da0070 ffff88007198db24 [ 359.976090] Call Trace: [ 359.976096] [] ? dump_stack+0x41/0x51 [ 359.976111] [] ? warn_slowpath_common+0x73/0x8b [ 359.976131] [] ? gen6_write32+0x1a/0x6b [i915] [ 359.976141] [] ? warn_slowpath_fmt+0x45/0x4a [ 359.976162] [] ? gen6_write32+0x1a/0x6b [i915] [ 359.976187] [] ? vlv_sideband_rw+0x252/0x2bb [i915] [ 359.976208] [] ? vlv_punit_read+0x60/0x75 [i915] [ 359.976223] [] ? vlv_power_well_enabled+0x51/0x91 [i915] [ 359.976239] [] ? intel_display_power_enabled+0x58/0x8b [i915] [ 359.976259] [] ? intel_dp_get_hw_state+0x2f/0x139 [i915] [ 359.976279] [] ? __intel_set_mode+0x10d4/0x1195 [i915] [ 359.976300] [] ? intel_connector_get_hw_state+0x21/0x26 [i915] [ 359.976321] [] ? intel_modeset_check_state+0x26/0x5f3 [i915] [ 359.976342] [] ? intel_set_mode+0x1d/0x27 [i915] [ 359.976363] [] ? intel_crtc_set_config+0x715/0xa17 [i915] [ 359.976375] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.976387] [] ? drm_mode_set_config_internal+0x48/0xad [drm] [ 359.976398] [] ? drm_mode_setcrtc+0x3f2/0x490 [drm] [ 359.976408] [] ? drm_ioctl+0x25c/0x3ad [drm] [ 359.976419] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.976425] [] ? do_vfs_ioctl+0x3ec/0x435 [ 359.976430] [] ? dentry_kill+0x1c0/0x1dc [ 359.976435] [] ? task_work_run+0x78/0x87 [ 359.976440] [] ? SyS_ioctl+0x49/0x78 [ 359.976445] [] ? int_signal+0x12/0x17 [ 359.976450] [] ? system_call_fastpath+0x16/0x1b [ 359.976453] ---[ end trace ae43ead642b73c99 ]--- [ 359.976456] ------------[ cut here ]------------ [ 359.976475] WARNING: CPU: 1 PID: 3936 at drivers/gpu/drm/i915/intel_uncore.c:47 gen6_write32+0x1a/0x6b [i915]() [ 359.976478] Device suspended [ 359.976480] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support serio_raw pcspkr i2c_i801 lpc_ich mfd_core snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore battery ac acpi_cpufreq i915 video button drm_kms_helper drm [ 359.976504] CPU: 1 PID: 3936 Comm: pm_pc8 Tainted: G W 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ #2606 [ 359.976506] 0000000000000000 0000000000000009 ffffffff81723497 ffff88007198da38 [ 359.976511] ffffffff8103516a 0000000000000000 ffffffffa008f824 0000000000000286 [ 359.976515] ffff880002da0000 0000000000182100 ffff880002da0070 ffff88007198db24 [ 359.976519] Call Trace: [ 359.976525] [] ? dump_stack+0x41/0x51 [ 359.976530] [] ? warn_slowpath_common+0x73/0x8b [ 359.976550] [] ? gen6_write32+0x1a/0x6b [i915] [ 359.976555] [] ? warn_slowpath_fmt+0x45/0x4a [ 359.976575] [] ? gen6_write32+0x1a/0x6b [i915] [ 359.976596] [] ? vlv_sideband_rw+0x141/0x2bb [i915] [ 359.976617] [] ? vlv_punit_read+0x60/0x75 [i915] [ 359.976632] [] ? vlv_power_well_enabled+0x51/0x91 [i915] [ 359.976648] [] ? intel_display_power_enabled+0x58/0x8b [i915] [ 359.976668] [] ? intel_dp_get_hw_state+0x2f/0x139 [i915] [ 359.976688] [] ? __intel_set_mode+0x10d4/0x1195 [i915] [ 359.976709] [] ? intel_connector_get_hw_state+0x21/0x26 [i915] [ 359.976730] [] ? intel_modeset_check_state+0x26/0x5f3 [i915] [ 359.976751] [] ? intel_set_mode+0x1d/0x27 [i915] [ 359.976772] [] ? intel_crtc_set_config+0x715/0xa17 [i915] [ 359.976784] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.976795] [] ? drm_mode_set_config_internal+0x48/0xad [drm] [ 359.976806] [] ? drm_mode_setcrtc+0x3f2/0x490 [drm] [ 359.976816] [] ? drm_ioctl+0x25c/0x3ad [drm] [ 359.976827] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.976833] [] ? do_vfs_ioctl+0x3ec/0x435 [ 359.976838] [] ? dentry_kill+0x1c0/0x1dc [ 359.976843] [] ? task_work_run+0x78/0x87 [ 359.976848] [] ? SyS_ioctl+0x49/0x78 [ 359.976853] [] ? int_signal+0x12/0x17 [ 359.976858] [] ? system_call_fastpath+0x16/0x1b [ 359.976861] ---[ end trace ae43ead642b73c9a ]--- [ 359.976864] ------------[ cut here ]------------ [ 359.976883] WARNING: CPU: 1 PID: 3936 at drivers/gpu/drm/i915/intel_uncore.c:47 vlv_read32+0x17/0xee [i915]() [ 359.976886] Device suspended [ 359.976887] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support serio_raw pcspkr i2c_i801 lpc_ich mfd_core snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore battery ac acpi_cpufreq i915 video button drm_kms_helper drm [ 359.976911] CPU: 1 PID: 3936 Comm: pm_pc8 Tainted: G W 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ #2606 [ 359.976914] 0000000000000000 0000000000000009 ffffffff81723497 ffff88007198da38 [ 359.976927] ffffffff8103516a 0000000000000000 ffffffffa008efb0 0000000000000286 [ 359.976954] ffff880002da0000 0000000000182100 000000010000e773 ffff880002da0070 [ 359.976998] Call Trace: [ 359.977020] [] ? dump_stack+0x41/0x51 [ 359.977042] [] ? warn_slowpath_common+0x73/0x8b [ 359.977067] [] ? vlv_read32+0x17/0xee [i915] [ 359.977072] [] ? warn_slowpath_fmt+0x45/0x4a [ 359.977092] [] ? vlv_read32+0x17/0xee [i915] [ 359.977113] [] ? vlv_sideband_rw+0x1bb/0x2bb [i915] [ 359.977133] [] ? vlv_punit_read+0x60/0x75 [i915] [ 359.977148] [] ? vlv_power_well_enabled+0x51/0x91 [i915] [ 359.977164] [] ? intel_display_power_enabled+0x58/0x8b [i915] [ 359.977184] [] ? intel_dp_get_hw_state+0x2f/0x139 [i915] [ 359.977205] [] ? __intel_set_mode+0x10d4/0x1195 [i915] [ 359.977239] [] ? intel_connector_get_hw_state+0x21/0x26 [i915] [ 359.977276] [] ? intel_modeset_check_state+0x26/0x5f3 [i915] [ 359.977313] [] ? intel_set_mode+0x1d/0x27 [i915] [ 359.977345] [] ? intel_crtc_set_config+0x715/0xa17 [i915] [ 359.977357] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.977368] [] ? drm_mode_set_config_internal+0x48/0xad [drm] [ 359.977379] [] ? drm_mode_setcrtc+0x3f2/0x490 [drm] [ 359.977389] [] ? drm_ioctl+0x25c/0x3ad [drm] [ 359.977400] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.977406] [] ? do_vfs_ioctl+0x3ec/0x435 [ 359.977411] [] ? dentry_kill+0x1c0/0x1dc [ 359.977416] [] ? task_work_run+0x78/0x87 [ 359.977421] [] ? SyS_ioctl+0x49/0x78 [ 359.977426] [] ? int_signal+0x12/0x17 [ 359.977431] [] ? system_call_fastpath+0x16/0x1b [ 359.977435] ---[ end trace ae43ead642b73c9b ]--- [ 359.977447] ------------[ cut here ]------------ [ 359.977476] WARNING: CPU: 1 PID: 3936 at drivers/gpu/drm/i915/intel_uncore.c:47 vlv_read32+0x17/0xee [i915]() [ 359.977488] Device suspended [ 359.977493] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support serio_raw pcspkr i2c_i801 lpc_ich mfd_core snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore battery ac acpi_cpufreq i915 video button drm_kms_helper drm [ 359.977517] CPU: 1 PID: 3936 Comm: pm_pc8 Tainted: G W 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ #2606 [ 359.977519] 0000000000000000 0000000000000009 ffffffff81723497 ffff88007198da38 [ 359.977524] ffffffff8103516a 0000000000000000 ffffffffa008efb0 0000000000000286 [ 359.977528] ffff880002da0000 0000000000182104 000000010000e773 ffff880002da0070 [ 359.977533] Call Trace: [ 359.977538] [] ? dump_stack+0x41/0x51 [ 359.977543] [] ? warn_slowpath_common+0x73/0x8b [ 359.977563] [] ? vlv_read32+0x17/0xee [i915] [ 359.977586] [] ? warn_slowpath_fmt+0x45/0x4a [ 359.977609] [] ? vlv_read32+0x17/0xee [i915] [ 359.977630] [] ? vlv_sideband_rw+0x206/0x2bb [i915] [ 359.977650] [] ? vlv_punit_read+0x60/0x75 [i915] [ 359.977672] [] ? vlv_power_well_enabled+0x51/0x91 [i915] [ 359.977688] [] ? intel_display_power_enabled+0x58/0x8b [i915] [ 359.977708] [] ? intel_dp_get_hw_state+0x2f/0x139 [i915] [ 359.977729] [] ? __intel_set_mode+0x10d4/0x1195 [i915] [ 359.977750] [] ? intel_connector_get_hw_state+0x21/0x26 [i915] [ 359.977770] [] ? intel_modeset_check_state+0x26/0x5f3 [i915] [ 359.977791] [] ? intel_set_mode+0x1d/0x27 [i915] [ 359.977812] [] ? intel_crtc_set_config+0x715/0xa17 [i915] [ 359.977824] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.977836] [] ? drm_mode_set_config_internal+0x48/0xad [drm] [ 359.977847] [] ? drm_mode_setcrtc+0x3f2/0x490 [drm] [ 359.977857] [] ? drm_ioctl+0x25c/0x3ad [drm] [ 359.977868] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.977874] [] ? do_vfs_ioctl+0x3ec/0x435 [ 359.977878] [] ? dentry_kill+0x1c0/0x1dc [ 359.977884] [] ? task_work_run+0x78/0x87 [ 359.977889] [] ? SyS_ioctl+0x49/0x78 [ 359.977894] [] ? int_signal+0x12/0x17 [ 359.977899] [] ? system_call_fastpath+0x16/0x1b [ 359.977902] ---[ end trace ae43ead642b73c9c ]--- [ 359.977905] ------------[ cut here ]------------ [ 359.977925] WARNING: CPU: 1 PID: 3936 at drivers/gpu/drm/i915/intel_uncore.c:47 gen6_write32+0x1a/0x6b [i915]() [ 359.977935] Device suspended [ 359.977944] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support serio_raw pcspkr i2c_i801 lpc_ich mfd_core snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore battery ac acpi_cpufreq i915 video button drm_kms_helper drm [ 359.978008] CPU: 1 PID: 3936 Comm: pm_pc8 Tainted: G W 3.15.0-rc3_drm-intel-nightly_2be456_20140514+ #2606 [ 359.978010] 0000000000000000 0000000000000009 ffffffff81723497 ffff88007198da38 [ 359.978015] ffffffff8103516a 0000000000000000 ffffffffa008f824 0000000000000286 [ 359.978019] ffff880002da0000 0000000000182104 ffff880002da0070 ffff88007198db24 [ 359.978024] Call Trace: [ 359.978029] [] ? dump_stack+0x41/0x51 [ 359.978034] [] ? warn_slowpath_common+0x73/0x8b [ 359.978054] [] ? gen6_write32+0x1a/0x6b [i915] [ 359.978059] [] ? warn_slowpath_fmt+0x45/0x4a [ 359.978080] [] ? gen6_write32+0x1a/0x6b [i915] [ 359.978118] [] ? vlv_sideband_rw+0x21f/0x2bb [i915] [ 359.978145] [] ? vlv_punit_read+0x60/0x75 [i915] [ 359.978160] [] ? vlv_power_well_enabled+0x51/0x91 [i915] [ 359.978176] [] ? intel_display_power_enabled+0x58/0x8b [i915] [ 359.978203] [] ? intel_dp_get_hw_state+0x2f/0x139 [i915] [ 359.978224] [] ? __intel_set_mode+0x10d4/0x1195 [i915] [ 359.978245] [] ? intel_connector_get_hw_state+0x21/0x26 [i915] [ 359.978266] [] ? intel_modeset_check_state+0x26/0x5f3 [i915] [ 359.978287] [] ? intel_set_mode+0x1d/0x27 [i915] [ 359.978308] [] ? intel_crtc_set_config+0x715/0xa17 [i915] [ 359.978319] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.978331] [] ? drm_mode_set_config_internal+0x48/0xad [drm] [ 359.978342] [] ? drm_mode_setcrtc+0x3f2/0x490 [drm] [ 359.978352] [] ? drm_ioctl+0x25c/0x3ad [drm] [ 359.978363] [] ? drm_mode_setplane+0x342/0x342 [drm] [ 359.978369] [] ? do_vfs_ioctl+0x3ec/0x435 [ 359.978374] [] ? dentry_kill+0x1c0/0x1dc [ 359.978379] [] ? task_work_run+0x78/0x87 [ 359.978384] [] ? SyS_ioctl+0x49/0x78 [ 359.978389] [] ? int_signal+0x12/0x17 [ 359.978395] [] ? system_call_fastpath+0x16/0x1b [ 359.978398] ---[ end trace ae43ead642b73c9d ]--- [ 359.978405] [drm:check_encoder_state] [ENCODER:13:DAC-13] [ 359.978409] [drm:check_encoder_state] [ENCODER:14:TMDS-14] [ 359.978412] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 359.978416] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 359.978420] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 359.978423] [drm:check_crtc_state] [CRTC:5] [ 359.978427] [drm:check_crtc_state] [CRTC:9] [ 359.978443] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 359.978449] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 359.978453] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 359.996463] [drm:intel_runtime_resume] Resuming device [ 360.000113] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 360.004117] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 360.004233] [drm:intel_runtime_resume] Device resumed [ 360.004241] [drm:intel_display_power_get] enabling display [ 360.012142] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 360.016140] [drm:intel_display_power_get] enabling dpio-common [ 360.028164] [drm:intel_display_power_get] enabling dpio-tx-b-01 [ 360.040187] [drm:intel_display_power_get] enabling dpio-tx-b-23 [ 360.052211] [drm:intel_display_power_get] enabling dpio-tx-c-01 [ 360.064234] [drm:intel_display_power_get] enabling dpio-tx-c-23 [ 360.076261] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 360.124355] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 360.124362] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 360.262876] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000 [ 360.273937] [drm:wait_panel_status] Wait complete [ 360.273971] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 360.273985] [drm:_edp_panel_vdd_on] eDP was not running [ 360.523441] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 360.575538] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 360.627639] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 360.679740] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 360.731843] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 360.783943] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 360.809703] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 360.833893] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 360.833899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 360.857882] [drm:drm_mode_setcrtc] [CRTC:9] [ 360.857888] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 360.857895] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 361.442620] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 361.443790] [drm:valleyview_enable_rps] GPLL enabled? yes [ 361.443795] [drm:valleyview_enable_rps] GPU status: 0x0000c090 [ 361.443799] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192) [ 361.443802] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 361.443806] [drm:valleyview_set_rps] GPU freq request from 200 MHz (192) to 400 MHz (201) [ 361.644332] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 361.644344] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 361.644348] [drm:intel_display_power_put] disabling dpio-tx-c-23 [ 361.656347] [drm:intel_display_power_put] disabling dpio-tx-c-01 [ 361.668229] [drm:intel_display_power_put] disabling dpio-tx-b-23 [ 361.680398] [drm:intel_display_power_put] disabling dpio-tx-b-01 [ 361.692418] [drm:intel_display_power_put] disabling dpio-common [ 361.704444] [drm:intel_display_power_put] disabling display [ 361.716471] [drm:intel_runtime_suspend] Suspending device [ 361.718353] [drm:intel_runtime_suspend] Device suspended [ 361.774138] [drm:intel_runtime_resume] Resuming device [ 361.777576] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 361.781582] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 361.781689] [drm:intel_runtime_resume] Device resumed [ 363.446504] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 363.447696] [drm:valleyview_enable_rps] GPLL enabled? yes [ 363.447700] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 363.447704] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 363.447707] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 363.447711] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 363.447722] [drm:intel_runtime_suspend] Suspending device [ 363.447731] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 363.451867] [drm:intel_runtime_suspend] Device suspended [ 363.502315] [drm:intel_runtime_resume] Resuming device [ 363.505956] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 363.509964] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 363.510088] [drm:intel_runtime_resume] Device resumed [ 365.450427] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 365.451601] [drm:valleyview_enable_rps] GPLL enabled? yes [ 365.451605] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 365.451609] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 365.451612] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 365.451616] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 365.451627] [drm:intel_runtime_suspend] Suspending device [ 365.451636] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 365.455782] [drm:intel_runtime_suspend] Device suspended [ 365.533275] [drm:intel_runtime_resume] Resuming device [ 365.536913] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 365.540923] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 365.541043] [drm:intel_runtime_resume] Device resumed [ 367.453950] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 367.455506] [drm:valleyview_enable_rps] GPLL enabled? yes [ 367.455511] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 367.455514] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 367.455518] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 367.455522] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 367.455533] [drm:intel_runtime_suspend] Suspending device [ 367.455541] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 367.459676] [drm:intel_runtime_suspend] Device suspended [ 367.564217] [drm:intel_runtime_resume] Resuming device [ 367.567726] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 367.571883] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 367.572004] [drm:intel_runtime_resume] Device resumed [ 369.458283] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 369.459412] [drm:valleyview_enable_rps] GPLL enabled? yes [ 369.459416] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 369.459420] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 369.459423] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 369.459427] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 369.459438] [drm:intel_runtime_suspend] Suspending device [ 369.459446] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 369.463593] [drm:intel_runtime_suspend] Device suspended [ 369.493674] [drm:intel_runtime_resume] Resuming device [ 369.497645] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 369.501652] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 369.501774] [drm:intel_runtime_resume] Device resumed [ 371.462127] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 371.463317] [drm:valleyview_enable_rps] GPLL enabled? yes [ 371.463321] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 371.463325] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 371.463328] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 371.463332] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 371.463343] [drm:intel_runtime_suspend] Suspending device [ 371.463352] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 371.467489] [drm:intel_runtime_suspend] Device suspended [ 371.523949] [drm:intel_runtime_resume] Resuming device [ 371.527656] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 371.531662] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 371.531787] [drm:intel_runtime_resume] Device resumed [ 373.465729] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 373.467222] [drm:valleyview_enable_rps] GPLL enabled? yes [ 373.467227] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 373.467230] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 373.467234] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 373.467238] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 373.467248] [drm:intel_runtime_suspend] Suspending device [ 373.467257] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 373.471391] [drm:intel_runtime_suspend] Device suspended [ 373.554906] [drm:intel_runtime_resume] Resuming device [ 373.558548] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 373.562555] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 373.562664] [drm:intel_runtime_resume] Device resumed [ 375.469930] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 375.471127] [drm:valleyview_enable_rps] GPLL enabled? yes [ 375.471132] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 375.471136] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 375.471139] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 375.471143] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 375.471154] [drm:intel_runtime_suspend] Suspending device [ 375.471162] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 375.475297] [drm:intel_runtime_suspend] Device suspended [ 375.584855] [drm:intel_runtime_resume] Resuming device [ 375.588505] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 375.592509] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 375.592617] [drm:intel_runtime_resume] Device resumed [ 375.592654] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 375.594366] [drm:valleyview_enable_rps] GPLL enabled? yes [ 375.594371] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 375.594374] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 375.594378] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 375.594382] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 375.594547] [drm:intel_runtime_suspend] Suspending device [ 375.594558] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (00000081) [ 375.600403] [drm:intel_runtime_suspend] Device suspended [ 375.706097] [drm:intel_runtime_resume] Resuming device [ 375.709740] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 375.713751] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 375.713859] [drm:intel_runtime_resume] Device resumed [ 377.469818] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 377.471026] [drm:valleyview_enable_rps] GPLL enabled? yes [ 377.471030] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 377.471034] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 377.471037] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 377.471041] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 377.471052] [drm:intel_runtime_suspend] Suspending device [ 377.471060] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 377.475209] [drm:intel_runtime_suspend] Device suspended [ 377.535642] [drm:intel_runtime_resume] Resuming device [ 377.539305] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 377.543311] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 377.543421] [drm:intel_runtime_resume] Device resumed [ 379.473707] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 379.474930] [drm:valleyview_enable_rps] GPLL enabled? yes [ 379.474935] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 379.474938] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 379.474942] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 379.474946] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 379.474957] [drm:intel_runtime_suspend] Suspending device [ 379.474966] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 379.479112] [drm:intel_runtime_suspend] Device suspended [ 379.566628] [drm:intel_runtime_resume] Resuming device [ 379.570266] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 379.574273] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 379.574395] [drm:intel_runtime_resume] Device resumed [ 381.477615] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 381.478835] [drm:valleyview_enable_rps] GPLL enabled? yes [ 381.478840] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 381.478844] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 381.478847] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 381.478851] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 381.478862] [drm:intel_runtime_suspend] Suspending device [ 381.478871] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 381.483016] [drm:intel_runtime_suspend] Device suspended [ 381.597627] [drm:intel_runtime_resume] Resuming device [ 381.601232] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 381.605240] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 381.605348] [drm:intel_runtime_resume] Device resumed [ 381.605382] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 381.607084] [drm:valleyview_enable_rps] GPLL enabled? yes [ 381.607089] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 381.607092] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 381.607095] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 381.607099] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 381.613267] [drm:intel_runtime_suspend] Suspending device [ 381.615128] [drm:intel_runtime_suspend] Device suspended [ 381.724892] [drm:intel_runtime_resume] Resuming device [ 381.728474] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 381.732480] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 381.732588] [drm:intel_runtime_resume] Device resumed [ 383.485543] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 383.486749] [drm:valleyview_enable_rps] GPLL enabled? yes [ 383.486753] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 383.486757] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 383.486761] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 383.486765] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 383.486776] [drm:intel_runtime_suspend] Suspending device [ 383.486784] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 383.490918] [drm:intel_runtime_suspend] Device suspended [ 383.554392] [drm:intel_runtime_resume] Resuming device [ 383.558037] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 383.562044] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 383.562166] [drm:intel_runtime_resume] Device resumed [ 385.489462] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 385.490654] [drm:valleyview_enable_rps] GPLL enabled? yes [ 385.490658] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 385.490662] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 385.490666] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 385.490670] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 385.490681] [drm:intel_runtime_suspend] Suspending device [ 385.490690] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 385.494823] [drm:intel_runtime_suspend] Device suspended [ 385.586336] [drm:intel_runtime_resume] Resuming device [ 385.589992] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 385.594000] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 385.594109] [drm:intel_runtime_resume] Device resumed [ 387.493354] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 387.494559] [drm:valleyview_enable_rps] GPLL enabled? yes [ 387.494563] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 387.494567] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 387.494571] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 387.494575] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 387.494586] [drm:intel_runtime_suspend] Suspending device [ 387.494594] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 387.498729] [drm:intel_runtime_suspend] Device suspended [ 387.617307] [drm:intel_runtime_resume] Resuming device [ 387.620955] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 387.624960] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 387.625084] [drm:intel_runtime_resume] Device resumed [ 389.497016] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 389.498466] [drm:valleyview_enable_rps] GPLL enabled? yes [ 389.498470] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 389.498474] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 389.498477] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 389.498482] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 389.498493] [drm:intel_runtime_suspend] Suspending device [ 389.498501] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 389.502662] [drm:intel_runtime_suspend] Device suspended [ 389.546591] [drm:intel_runtime_resume] Resuming device [ 389.550567] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 389.554707] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz<7>[ 389.554814] [drm:intel_runtime_resume] Device resumed [ 391.501189] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 391.502370] [drm:valleyview_enable_rps] GPLL enabled? yes [ 391.502374] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 391.502378] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 391.502381] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 391.502385] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 391.502396] [drm:intel_runtime_suspend] Suspending device [ 391.502405] [drm:vlv_wait_for_gt_wells] waiting for GT wells to go off (000000a1) [ 391.506552] [drm:intel_runtime_suspend] Device suspended [ 391.566437] [drm:intel_crtc_cursor_set] cursor off [ 391.566441] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 391.566445] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 391.566447] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0 [ 391.566448] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 391.566451] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 391.566453] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 391.566455] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 391.566458] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 391.566462] [drm:connected_sink_compute_bpp] [CONNECTOR:23:eDP-1] checking for sink bpp constrains [ 391.566502] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 391.566504] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 391.566505] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 391.566514] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 391.566516] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 391.566519] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 391.566521] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 391.566522] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 391.566524] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 391.566526] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 391.566528] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 391.566529] [drm:intel_dump_pipe_config] requested mode: [ 391.566533] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 391.566534] [drm:intel_dump_pipe_config] adjusted mode: [ 391.566538] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 391.566541] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 391.566542] [drm:intel_dump_pipe_config] port clock: 270000 [ 391.566543] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 391.566545] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 391.566547] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 391.566548] [drm:intel_dump_pipe_config] ips: 0 [ 391.566549] [drm:intel_dump_pipe_config] double wide: 0 [ 391.578010] [drm:intel_runtime_resume] Resuming device [ 391.585675] [drm:valleyview_init_clock_gating] DDR speed: 1066 MHz [ 391.585809] [drm:valleyview_init_clock_gating] Current CD clock rate: 266 MHz [ 391.585809] [drm:intel_runtime_resume] Device resumed [ 391.585814] [drm:intel_display_power_get] enabling display [ 391.593701] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 391.605714] [drm:intel_display_power_get] enabling dpio-common [ 391.617738] [drm:intel_display_power_get] enabling dpio-tx-b-01 [ 391.629762] [drm:intel_display_power_get] enabling dpio-tx-b-23 [ 391.641787] [drm:intel_display_power_get] enabling dpio-tx-c-01 [ 391.653812] [drm:intel_display_power_get] enabling dpio-tx-c-23 [ 391.687889] [drm:i9xx_update_primary_plane] Writing base 00855000 00000000 0 0 7680 [ 391.687900] [drm:intel_edp_psr_match_conditions] PSR not supported on this platform [ 391.687904] [drm:intel_crtc_mode_set] [ENCODER:22:TMDS-22] set [MODE:0:1920x1080] [ 391.709924] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000 [ 391.709927] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 391.709929] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 391.709931] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 391.709936] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05 [ 391.758018] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 391.758020] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 391.758024] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 392.088951] [drm:wait_panel_status] Wait complete [ 392.088967] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 392.088972] [drm:_edp_panel_vdd_on] eDP was not running [ 392.120608] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 392.120616] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 392.446363] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 392.542578] [drm:intel_dp_start_link_train] clock recovery OK [ 392.542580] [drm:intel_edp_panel_on] Turn eDP power on [ 392.542582] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 392.542586] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 392.542587] [drm:wait_panel_status] Wait complete [ 392.542589] [drm:wait_panel_on] Wait for panel power on [ 392.542592] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 392.696837] [drm:wait_panel_status] Wait complete [ 392.720891] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 392.720896] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 392.793032] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 392.793037] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 392.817269] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 392.841327] [drm:g4x_check_srwm] SR watermark: display plane 107, cursor 2 [ 392.841329] [drm:g4x_check_srwm] SR watermark: display plane 211, cursor 2 [ 392.841332] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=61, cursor=2, B: plane=2, cursor=2, SR: plane=107, cursor=2 [ 392.841340] [drm:intel_edp_backlight_on] [ 392.841343] [drm:intel_panel_enable_backlight] pipe A [ 392.841346] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812 [ 392.883210] [drm:intel_connector_check_state] [CONNECTOR:23:eDP-1] [ 392.987410] [drm:check_encoder_state] [ENCODER:13:DAC-13] [ 392.995425] [drm:check_encoder_state] [ENCODER:14:TMDS-14] [ 393.019471] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 393.043520] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 393.067567] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 393.091615] [drm:check_crtc_state] [CRTC:5] [ 393.121679] [drm:check_crtc_state] [CRTC:9] [ 393.125705] [drm:intel_crtc_cursor_set] cursor off [ 393.125708] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 393.125711] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 393.125714] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 393.125724] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 393.125726] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 393.125729] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 393.174049] [drm:intel_dp_get_dpcd] DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 393.197976] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 393.269966] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 393.318220] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 393.342267] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 393.366150] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 393.390346] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 393.390348] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 393.414254] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 393.414258] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 393.414261] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 393.414279] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 393.414282] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 393.414284] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 393.430427] [drm:intel_crtc_cursor_set] cursor off [ 393.430437] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 393.430450] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 393.430463] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 393.430475] [drm:intel_crtc_cursor_set] cursor off [ 393.430488] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 393.430501] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 393.430515] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 393.505116] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 393.506275] [drm:valleyview_enable_rps] GPLL enabled? yes [ 393.506280] [drm:valleyview_enable_rps] GPU status: 0x0000c990 [ 393.506284] [drm:valleyview_enable_rps] current GPU freq: 400 MHz (201) [ 393.506287] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201) [ 393.506291] [drm:valleyview_set_rps] GPU freq request from 400 MHz (201) to 400 MHz (201) [ 395.325972] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 395.325982] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 408.958454] [drm:i915_gem_open] [ 408.958505] [drm:intel_crtc_cursor_set] cursor off [ 408.958512] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 408.958520] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 408.958525] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 408.958530] [drm:intel_crtc_cursor_set] cursor off [ 408.958533] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 408.958537] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 408.958541] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 408.958563] [drm:i915_gem_open] [ 408.958735] [drm:valleyview_set_rps] GPU freq request from 178 MHz (191) to 755 MHz (217) [ 408.960471] [drm:i915_gem_open] [ 408.960507] [drm:i915_gem_open] [ 408.960528] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 408.960549] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 408.960566] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 408.960572] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:eDP-1] [ 408.984574] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 409.032668] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 409.032676] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 409.056956] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 409.080994] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 409.134877] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 409.158916] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:eDP-1] probed modes : [ 409.158924] [drm:drm_mode_debug_printmodeline] Modeline 24:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 409.158934] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 409.158986] [drm:drm_mode_getconnector] [CONNECTOR:12:?] [ 409.158991] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] [ 409.158995] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1 [ 409.166929] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000 [ 409.170961] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0 [ 409.170966] [drm:intel_crt_detect] CRT not detected via hotplug [ 409.171119] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 409.171124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 409.171127] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 409.171131] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 409.173086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 409.173091] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 409.173094] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 409.180957] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] disconnected [ 409.180965] [drm:drm_mode_getconnector] [CONNECTOR:12:?] [ 409.180970] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] [ 409.180974] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1 [ 409.188972] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000 [ 409.192984] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0 [ 409.192988] [drm:intel_crt_detect] CRT not detected via hotplug [ 409.193138] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 409.193142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 409.193145] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 409.193149] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 409.195128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 409.195133] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 409.195136] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 409.203025] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] disconnected [ 409.203050] [drm:drm_mode_getconnector] [CONNECTOR:15:?] [ 409.203055] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] [ 409.203059] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] [ 409.227192] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 409.227197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 409.251119] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected [ 409.251127] [drm:drm_mode_getconnector] [CONNECTOR:15:?] [ 409.251131] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] [ 409.251135] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] [ 409.275284] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 409.275290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 409.299213] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected [ 409.299243] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 409.299249] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] [ 409.323234] [drm:intel_dp_detect] [CONNECTOR:19:DP-1] [ 409.347306] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected [ 409.347314] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 409.347318] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] [ 409.371327] [drm:intel_dp_detect] [CONNECTOR:19:DP-1] [ 409.395243] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected [ 409.395271] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 409.395276] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] [ 409.395280] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 409.419568] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 409.419573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 409.443495] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] disconnected [ 409.443503] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 409.443508] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] [ 409.443511] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 409.467661] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 409.467666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 409.491592] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] disconnected [ 409.531643] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 409.531649] [drm:intel_edp_backlight_off] [ 409.555937] [drm:intel_edp_panel_off] Turn eDP power off [ 409.733310] [drm:wait_panel_off] Wait for panel power off time [ 409.733338] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 409.774985] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 409.775008] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 409.777127] [drm:wait_panel_status] Wait complete [ 409.809185] [drm:intel_dp_link_down] [ 409.864338] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 409.968533] [drm:check_encoder_state] [ENCODER:13:DAC-13] [ 409.976548] [drm:check_encoder_state] [ENCODER:14:TMDS-14] [ 410.000590] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 410.024636] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 410.048680] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 410.072725] [drm:check_crtc_state] [CRTC:5] [ 410.100801] [drm:check_crtc_state] [CRTC:9] [ 410.104858] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 410.104865] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 410.104869] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 410.128826] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 410.176915] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 410.176921] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 410.235028] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 410.235033] [drm:wait_panel_status] Wait complete [ 410.235038] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 410.235042] [drm:_edp_panel_vdd_on] eDP was not running [ 410.264517] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 410.264542] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 410.482524] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 410.530611] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 410.554650] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 410.578838] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 410.578844] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 410.602741] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 410.602747] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 410.602751] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 410.626786] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 410.698939] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 410.747032] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 410.771066] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 410.795258] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 410.795263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 411.613713] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 411.613723] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 411.714920] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 411.714926] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 411.714944] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 411.714950] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 411.714955] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 411.738941] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 411.787035] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 411.787041] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 412.115901] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 412.115908] [drm:wait_panel_status] Wait complete [ 412.115914] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 412.115917] [drm:_edp_panel_vdd_on] eDP was not running [ 412.145541] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 412.145566] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 412.363191] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 412.411276] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 412.435315] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 412.459507] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 412.459512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 412.483406] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 412.483413] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 412.483417] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 412.507451] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 412.579605] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 412.627698] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 412.651722] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 412.675913] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 412.675918] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 414.940196] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 414.940205] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 415.041404] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 415.041410] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 415.041428] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 415.041434] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 415.041439] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 415.065424] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 415.113518] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 415.113523] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 415.442157] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 415.442176] [drm:wait_panel_status] Wait complete [ 415.442194] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 415.442205] [drm:_edp_panel_vdd_on] eDP was not running [ 415.471841] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 415.471866] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 415.689672] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 415.737759] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 415.761798] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 415.785989] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 415.785995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 415.809890] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 415.809896] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 415.809901] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 415.833935] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 415.906087] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 415.954180] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 415.978212] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 416.002406] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 416.002411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 418.266678] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 418.266688] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 418.368254] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 418.368278] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 418.368363] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 418.368381] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 418.368396] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 418.389913] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 418.438007] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 418.438013] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 418.768850] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 418.768869] [drm:wait_panel_status] Wait complete [ 418.768887] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 418.768899] [drm:_edp_panel_vdd_on] eDP was not running [ 418.798482] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 418.798507] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 419.016155] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 419.064246] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 419.088278] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 419.112468] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 419.112474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 419.136227] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 419.136233] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 419.136237] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 419.160417] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 419.232573] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 419.280664] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 419.304700] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 419.328891] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 419.328896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 420.159349] [drm:intel_crtc_cursor_set] cursor off [ 420.159354] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 420.159360] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0 [ 420.159363] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 420.159367] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 420.159371] [drm:connected_sink_compute_bpp] [CONNECTOR:23:eDP-1] checking for sink bpp constrains [ 420.159375] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 420.159377] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 420.159378] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 420.159387] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 420.159389] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 420.159392] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 420.159394] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 420.159395] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 420.159396] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 420.159399] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 420.159401] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 420.159402] [drm:intel_dump_pipe_config] requested mode: [ 420.159406] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 420.159407] [drm:intel_dump_pipe_config] adjusted mode: [ 420.159410] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 420.159413] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 420.159415] [drm:intel_dump_pipe_config] port clock: 270000 [ 420.159416] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 420.159418] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 420.159420] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 420.159421] [drm:intel_dump_pipe_config] ips: 0 [ 420.159422] [drm:intel_dump_pipe_config] double wide: 0 [ 420.245399] [drm:i9xx_update_primary_plane] Writing base 00855000 00000000 0 0 7680 [ 420.245411] [drm:intel_edp_psr_match_conditions] PSR not supported on this platform [ 420.245415] [drm:intel_crtc_mode_set] [ENCODER:22:TMDS-22] set [MODE:0:1920x1080] [ 420.267600] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 5000 [ 420.267603] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 420.267605] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 420.267606] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 420.267611] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05 [ 420.449941] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 420.546158] [drm:intel_dp_start_link_train] clock recovery OK [ 420.546160] [drm:intel_edp_panel_on] Turn eDP power on [ 420.546162] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 420.546166] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 420.546167] [drm:wait_panel_status] Wait complete [ 420.546169] [drm:wait_panel_on] Wait for panel power on [ 420.546173] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 420.700696] [drm:wait_panel_status] Wait complete [ 420.722461] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 420.722466] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 420.794600] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 420.794605] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 420.818835] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 420.842892] [drm:g4x_check_srwm] SR watermark: display plane 107, cursor 2 [ 420.842894] [drm:g4x_check_srwm] SR watermark: display plane 211, cursor 2 [ 420.842897] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=61, cursor=2, B: plane=2, cursor=2, SR: plane=107, cursor=2 [ 420.842905] [drm:intel_edp_backlight_on] [ 420.842909] [drm:intel_panel_enable_backlight] pipe A [ 420.842912] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812 [ 420.884787] [drm:intel_connector_check_state] [CONNECTOR:23:eDP-1] [ 420.988990] [drm:check_encoder_state] [ENCODER:13:DAC-13] [ 420.997004] [drm:check_encoder_state] [ENCODER:14:TMDS-14] [ 421.021048] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 421.045097] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 421.069145] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 421.093192] [drm:check_crtc_state] [CRTC:5] [ 421.123252] [drm:check_crtc_state] [CRTC:9] [ 421.127257] [drm:intel_crtc_cursor_set] cursor off [ 421.127260] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 421.127263] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 421.127266] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 421.127271] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 421.127274] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 421.127277] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 421.127293] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 421.127296] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 421.127298] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 421.143072] [drm:valleyview_set_rps] GPU freq request from 178 MHz (191) to 755 MHz (217) [ 421.144300] [drm:intel_crtc_cursor_set] cursor off [ 421.144306] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 421.144313] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 421.144318] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 421.144322] [drm:intel_crtc_cursor_set] cursor off [ 421.144325] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 421.144329] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 421.144333] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 421.593161] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 421.593170] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 431.726374] [drm:i915_gem_open] [ 431.726427] [drm:intel_crtc_cursor_set] cursor off [ 431.726434] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 431.726442] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 431.726447] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 431.726452] [drm:intel_crtc_cursor_set] cursor off [ 431.726455] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 431.726459] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 431.726464] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 431.726485] [drm:i915_gem_open] [ 431.726645] [drm:valleyview_set_rps] GPU freq request from 178 MHz (191) to 755 MHz (217) [ 431.727841] [drm:i915_gem_open] [ 431.727877] [drm:i915_gem_open] [ 431.727897] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 431.727919] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5] [ 431.727936] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 431.727942] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:eDP-1] [ 431.751990] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 431.800079] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 431.800087] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 431.824368] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 431.848412] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 431.902279] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 431.926318] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:eDP-1] probed modes : [ 431.926326] [drm:drm_mode_debug_printmodeline] Modeline 24:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 431.926335] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 431.926388] [drm:drm_mode_getconnector] [CONNECTOR:12:?] [ 431.926393] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] [ 431.926398] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1 [ 431.934329] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000 [ 431.938171] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0 [ 431.938175] [drm:intel_crt_detect] CRT not detected via hotplug [ 431.938328] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 431.938332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 431.938335] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 431.938339] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 431.940456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 431.940460] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 431.940463] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 431.948355] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] disconnected [ 431.948364] [drm:drm_mode_getconnector] [CONNECTOR:12:?] [ 431.948368] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] [ 431.948373] [drm:intel_crt_detect] [CONNECTOR:12:VGA-1] force=1 [ 431.956369] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000 [ 431.960375] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0 [ 431.960380] [drm:intel_crt_detect] CRT not detected via hotplug [ 431.960532] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 431.960536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 431.960539] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 431.960543] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 431.962498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 431.962503] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 431.962506] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 431.970421] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:12:VGA-1] disconnected [ 431.970447] [drm:drm_mode_getconnector] [CONNECTOR:15:?] [ 431.970452] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] [ 431.970456] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] [ 431.994588] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 431.994593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 432.018486] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected [ 432.018495] [drm:drm_mode_getconnector] [CONNECTOR:15:?] [ 432.018499] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] [ 432.018503] [drm:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] [ 432.042676] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 432.042681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 432.066578] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:15:HDMI-A-1] disconnected [ 432.066607] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 432.066613] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] [ 432.090621] [drm:intel_dp_detect] [CONNECTOR:19:DP-1] [ 432.114667] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected [ 432.114675] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 432.114679] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] [ 432.138711] [drm:intel_dp_detect] [CONNECTOR:19:DP-1] [ 432.162760] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:DP-1] disconnected [ 432.162788] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 432.162793] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] [ 432.162797] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 432.186952] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 432.186957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 432.210851] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] disconnected [ 432.210859] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 432.210863] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] [ 432.210867] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 432.235043] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 432.235048] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 432.258945] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-2] disconnected [ 432.291011] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 432.291017] [drm:intel_edp_backlight_off] [ 432.315272] [drm:intel_edp_panel_off] Turn eDP power off [ 432.492528] [drm:wait_panel_off] Wait for panel power off time [ 432.492557] [drm:wait_panel_status] mask b0000000 value 00000000 status e0000003 control abcd0000 [ 432.534207] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 432.534231] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 432.536344] [drm:wait_panel_status] Wait complete [ 432.566543] [drm:intel_dp_link_down] [ 432.621691] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 432.725892] [drm:check_encoder_state] [ENCODER:13:DAC-13] [ 432.733905] [drm:check_encoder_state] [ENCODER:14:TMDS-14] [ 432.757775] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 432.781995] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 432.806039] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 432.830082] [drm:check_crtc_state] [CRTC:5] [ 432.858133] [drm:check_crtc_state] [CRTC:9] [ 432.862149] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 432.862155] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 432.862159] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 432.886186] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 432.934280] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 432.934286] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 432.994399] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 432.994405] [drm:wait_panel_status] Wait complete [ 432.994411] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 432.994415] [drm:_edp_panel_vdd_on] eDP was not running [ 433.023902] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 433.023926] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 433.241878] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 433.289967] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 433.314004] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 433.338193] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 433.338199] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 433.362096] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 433.362102] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 433.362107] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 433.386140] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 433.458293] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 433.506387] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 433.530427] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 433.554625] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 433.554630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 434.378065] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 434.378074] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 434.479584] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 434.479607] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 434.479692] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 434.479710] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 434.479726] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 434.501380] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 434.549470] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 434.549476] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 434.880032] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 434.880051] [drm:wait_panel_status] Wait complete [ 434.880064] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 434.880067] [drm:_edp_panel_vdd_on] eDP was not running [ 434.909651] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 434.909676] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 435.127554] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 435.175640] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 435.199698] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 435.223887] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 435.223893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 435.247787] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 435.247793] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 435.247797] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 435.271830] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 435.343970] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 435.392061] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 435.416086] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 435.440277] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 435.440282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 437.706566] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 437.706576] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 437.808082] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 437.808106] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 437.808191] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 437.808210] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 437.808225] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 437.829800] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 437.877895] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 437.877900] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 438.208688] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 438.208707] [drm:wait_panel_status] Wait complete [ 438.208726] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 438.208737] [drm:_edp_panel_vdd_on] eDP was not running [ 438.238394] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 438.238418] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 438.456044] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 438.504127] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 438.528165] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 438.552355] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 438.552360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 438.576255] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 438.576262] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 438.576266] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 438.600299] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 438.672454] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 438.720548] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 438.744585] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 438.768775] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 438.768781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 441.041065] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 441.041075] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 441.142570] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 441.142593] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 441.142678] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 441.142697] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 441.142713] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 441.164295] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 441.212250] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 441.212255] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 441.543020] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 441.543040] [drm:wait_panel_status] Wait complete [ 441.543058] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 441.543069] [drm:_edp_panel_vdd_on] eDP was not running [ 441.572650] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000 [ 441.572675] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 441.790542] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 441.838625] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 441.862665] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 441.886856] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 441.886861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 441.910611] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 441.910617] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 5) received hotplug event. [ 441.910621] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event. [ 441.934800] [drm:intel_dp_detect] [CONNECTOR:23:eDP-1] [ 442.006953] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 442.055046] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 442.079085] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-2] [ 442.103276] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 442.103281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 443.634860] [drm:intel_crtc_cursor_set] cursor off [ 443.634865] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 443.634870] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0 [ 443.634873] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 443.634877] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 443.634881] [drm:connected_sink_compute_bpp] [CONNECTOR:23:eDP-1] checking for sink bpp constrains [ 443.634886] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 443.634888] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 443.634889] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 443.634898] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 443.634900] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 443.634903] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 443.634905] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 443.634906] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 443.634907] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 443.634910] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 443.634912] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 443.634913] [drm:intel_dump_pipe_config] requested mode: [ 443.634917] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 443.634918] [drm:intel_dump_pipe_config] adjusted mode: [ 443.634922] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 443.634925] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 443.634926] [drm:intel_dump_pipe_config] port clock: 270000 [ 443.634927] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 443.634929] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 443.634931] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 443.634932] [drm:intel_dump_pipe_config] ips: 0 [ 443.634933] [drm:intel_dump_pipe_config] double wide: 0 [ 443.720295] [drm:i9xx_update_primary_plane] Writing base 00855000 00000000 0 0 7680 [ 443.720300] [drm:intel_edp_psr_match_conditions] PSR not supported on this platform [ 443.720303] [drm:intel_crtc_mode_set] [ENCODER:22:TMDS-22] set [MODE:0:1920x1080] [ 443.742454] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 5000 [ 443.742457] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 443.742459] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 443.742461] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 443.742466] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05 [ 443.924682] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 444.020902] [drm:intel_dp_start_link_train] clock recovery OK [ 444.020904] [drm:intel_edp_panel_on] Turn eDP power on [ 444.020906] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 444.020910] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 444.020912] [drm:wait_panel_status] Wait complete [ 444.020914] [drm:wait_panel_on] Wait for panel power on [ 444.020917] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 444.175160] [drm:wait_panel_status] Wait complete [ 444.199218] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 444.199222] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 444.271356] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 444.271361] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 444.295589] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 444.319645] [drm:g4x_check_srwm] SR watermark: display plane 107, cursor 2 [ 444.319647] [drm:g4x_check_srwm] SR watermark: display plane 211, cursor 2 [ 444.319650] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=61, cursor=2, B: plane=2, cursor=2, SR: plane=107, cursor=2 [ 444.319658] [drm:intel_edp_backlight_on] [ 444.319661] [drm:intel_panel_enable_backlight] pipe A [ 444.319664] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812 [ 444.361533] [drm:intel_connector_check_state] [CONNECTOR:23:eDP-1] [ 444.465738] [drm:check_encoder_state] [ENCODER:13:DAC-13] [ 444.473752] [drm:check_encoder_state] [ENCODER:14:TMDS-14] [ 444.497799] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 444.521846] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 444.545892] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 444.569939] [drm:check_crtc_state] [CRTC:5] [ 444.600154] [drm:check_crtc_state] [CRTC:9] [ 444.604007] [drm:intel_crtc_cursor_set] cursor off [ 444.604009] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 444.604012] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 444.604015] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 444.604022] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 444.604025] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 444.604027] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 444.604043] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 444.604046] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 444.604048] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 444.620031] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 444.620036] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 444.659912] [drm:valleyview_set_rps] GPU freq request from 178 MHz (191) to 755 MHz (217) [ 444.661124] [drm:intel_crtc_cursor_set] cursor off [ 444.661131] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 444.661137] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 444.661142] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5] [ 444.661147] [drm:intel_crtc_cursor_set] cursor off [ 444.661150] [drm:intel_crtc_set_config] [CRTC:9] [NOFB] [ 444.661154] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], mode_changed=0, fb_changed=0 [ 444.661158] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:eDP-1] to [CRTC:5]