[ 259.208] X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 259.208] X Protocol Version 11, Revision 0 [ 259.208] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu [ 259.208] Current Operating System: Linux usb-key 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64 [ 259.208] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=65746657-cf3b-4b9f-8c7a-744c0ec49103 ro quiet splash vt.handoff=7 [ 259.208] Build Date: 16 April 2014 01:36:29PM [ 259.208] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 259.208] Current version of pixman: 0.30.2 [ 259.208] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 259.208] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 259.208] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 15 18:45:21 2014 [ 259.208] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 259.209] (==) No Layout section. Using the first Screen section. [ 259.209] (==) No screen section available. Using defaults. [ 259.209] (**) |-->Screen "Default Screen Section" (0) [ 259.209] (**) | |-->Monitor "" [ 259.209] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 259.209] (==) Automatically adding devices [ 259.209] (==) Automatically enabling devices [ 259.209] (==) Automatically adding GPU devices [ 259.209] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 259.209] Entry deleted from font path. [ 259.209] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 259.209] Entry deleted from font path. [ 259.209] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 259.209] Entry deleted from font path. [ 259.209] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 259.209] Entry deleted from font path. [ 259.209] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 259.209] Entry deleted from font path. [ 259.209] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 259.209] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 259.209] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 259.209] (II) Loader magic: 0x7faace82bd60 [ 259.209] (II) Module ABI versions: [ 259.209] X.Org ANSI C Emulation: 0.4 [ 259.209] X.Org Video Driver: 15.0 [ 259.209] X.Org XInput driver : 20.0 [ 259.209] X.Org Server Extension : 8.0 [ 259.209] (II) xfree86: Adding drm device (/dev/dri/card0) [ 259.211] (--) PCI:*(0:0:2:0) 8086:29b2:8086:4f4a rev 2, Mem @ 0xe0380000/524288, 0xd0000000/268435456, 0xe0200000/1048576, I/O @ 0x00002430/8 [ 259.211] (--) PCI: (0:0:2:1) 8086:29b3:8086:4f4a rev 2, Mem @ 0xe0300000/524288 [ 259.211] Initializing built-in extension Generic Event Extension [ 259.211] Initializing built-in extension SHAPE [ 259.211] Initializing built-in extension MIT-SHM [ 259.211] Initializing built-in extension XInputExtension [ 259.211] Initializing built-in extension XTEST [ 259.211] Initializing built-in extension BIG-REQUESTS [ 259.211] Initializing built-in extension SYNC [ 259.211] Initializing built-in extension XKEYBOARD [ 259.211] Initializing built-in extension XC-MISC [ 259.211] Initializing built-in extension SECURITY [ 259.211] Initializing built-in extension XINERAMA [ 259.211] Initializing built-in extension XFIXES [ 259.211] Initializing built-in extension RENDER [ 259.211] Initializing built-in extension RANDR [ 259.211] Initializing built-in extension COMPOSITE [ 259.211] Initializing built-in extension DAMAGE [ 259.211] Initializing built-in extension MIT-SCREEN-SAVER [ 259.211] Initializing built-in extension DOUBLE-BUFFER [ 259.211] Initializing built-in extension RECORD [ 259.211] Initializing built-in extension DPMS [ 259.211] Initializing built-in extension Present [ 259.211] Initializing built-in extension DRI3 [ 259.211] Initializing built-in extension X-Resource [ 259.211] Initializing built-in extension XVideo [ 259.211] Initializing built-in extension XVideo-MotionCompensation [ 259.211] Initializing built-in extension SELinux [ 259.211] Initializing built-in extension XFree86-VidModeExtension [ 259.211] Initializing built-in extension XFree86-DGA [ 259.211] Initializing built-in extension XFree86-DRI [ 259.211] Initializing built-in extension DRI2 [ 259.211] (II) LoadModule: "glx" [ 259.211] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 259.212] (II) Module glx: vendor="X.Org Foundation" [ 259.212] compiled for 1.15.1, module version = 1.0.0 [ 259.212] ABI class: X.Org Server Extension, version 8.0 [ 259.212] (==) AIGLX enabled [ 259.212] Loading extension GLX [ 259.212] (==) Matched intel as autoconfigured driver 0 [ 259.212] (==) Matched intel as autoconfigured driver 1 [ 259.212] (==) Matched modesetting as autoconfigured driver 2 [ 259.212] (==) Matched fbdev as autoconfigured driver 3 [ 259.212] (==) Matched vesa as autoconfigured driver 4 [ 259.212] (==) Assigned the driver to the xf86ConfigLayout [ 259.212] (II) LoadModule: "intel" [ 259.213] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 259.213] (II) Module intel: vendor="X.Org Foundation" [ 259.213] compiled for 1.15.0, module version = 2.99.910 [ 259.213] Module class: X.Org Video Driver [ 259.213] ABI class: X.Org Video Driver, version 15.0 [ 259.213] (II) LoadModule: "modesetting" [ 259.213] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 259.213] (II) Module modesetting: vendor="X.Org Foundation" [ 259.213] compiled for 1.15.0, module version = 0.8.1 [ 259.213] Module class: X.Org Video Driver [ 259.213] ABI class: X.Org Video Driver, version 15.0 [ 259.213] (II) LoadModule: "fbdev" [ 259.213] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 259.213] (II) Module fbdev: vendor="X.Org Foundation" [ 259.213] compiled for 1.15.0, module version = 0.4.4 [ 259.213] Module class: X.Org Video Driver [ 259.213] ABI class: X.Org Video Driver, version 15.0 [ 259.213] (II) LoadModule: "vesa" [ 259.214] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 259.214] (II) Module vesa: vendor="X.Org Foundation" [ 259.214] compiled for 1.15.0, module version = 2.3.3 [ 259.214] Module class: X.Org Video Driver [ 259.214] ABI class: X.Org Video Driver, version 15.0 [ 259.214] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 259.214] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000 [ 259.214] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100 [ 259.214] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200 [ 259.214] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 259.214] (II) FBDEV: driver for framebuffer: fbdev [ 259.214] (II) VESA: driver for VESA chipsets: vesa [ 259.214] (++) using VT number 7 [ 259.214] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 (Timo Aaltonen ) [ 259.214] (WW) Falling back to old probe method for modesetting [ 259.214] (WW) Falling back to old probe method for fbdev [ 259.214] (II) Loading sub module "fbdevhw" [ 259.214] (II) LoadModule: "fbdevhw" [ 259.215] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 259.215] (II) Module fbdevhw: vendor="X.Org Foundation" [ 259.215] compiled for 1.15.1, module version = 0.0.2 [ 259.215] ABI class: X.Org Video Driver, version 15.0 [ 259.215] (WW) Falling back to old probe method for vesa [ 259.215] (--) intel(0): Integrated Graphics Chipset: Intel(R) Q35 [ 259.215] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1 [ 259.215] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 259.215] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 259.215] (==) intel(0): RGB weight 888 [ 259.215] (==) intel(0): Default visual is TrueColor [ 259.215] (**) intel(0): Framebuffer tiled [ 259.215] (**) intel(0): Pixmaps tiled [ 259.215] (**) intel(0): "Tear free" disabled [ 259.215] (**) intel(0): Forcing per-crtc-pixmaps? no [ 259.216] (II) intel(0): Output VGA1 has no monitor section [ 259.216] (II) intel(0): Output DVI1 has no monitor section [ 259.216] (II) intel(0): Output VIRTUAL1 has no monitor section [ 259.216] (--) intel(0): Output VGA1 using initial mode on pipe 0 [ 259.216] (==) intel(0): DPI set to (96, 96) [ 259.216] (II) Loading sub module "dri2" [ 259.216] (II) LoadModule: "dri2" [ 259.216] (II) Module "dri2" already built-in [ 259.216] (II) UnloadModule: "modesetting" [ 259.216] (II) Unloading modesetting [ 259.216] (II) UnloadModule: "fbdev" [ 259.216] (II) Unloading fbdev [ 259.216] (II) UnloadSubModule: "fbdevhw" [ 259.216] (II) Unloading fbdevhw [ 259.216] (II) UnloadModule: "vesa" [ 259.216] (II) Unloading vesa [ 259.216] (==) Depth 24 pixmap format is 32 bpp [ 259.216] (II) intel(0): SNA initialized with Alviso (gen3) backend [ 259.216] (==) intel(0): Backing store enabled [ 259.216] (==) intel(0): Silken mouse enabled [ 259.216] (II) intel(0): HW Cursor enabled [ 259.216] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 259.216] (==) intel(0): DPMS enabled [ 259.216] (II) intel(0): [XvMC] i915_xvmc driver initialized. [ 259.216] (II) intel(0): [DRI2] Setup complete [ 259.216] (II) intel(0): [DRI2] DRI driver: i915 [ 259.216] (II) intel(0): [DRI2] VDPAU driver: i915 [ 259.216] (II) intel(0): direct rendering: DRI2 Enabled [ 259.216] (==) intel(0): hotplug detection: "enabled" [ 259.216] (--) RandR disabled [ 259.223] (II) SELinux: Disabled on system [ 259.226] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 259.226] (II) AIGLX: enabled GLX_ARB_create_context [ 259.226] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 259.226] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 259.226] (II) AIGLX: enabled GLX_INTEL_swap_event [ 259.226] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 259.226] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 259.226] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 259.226] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 259.226] (II) AIGLX: Loaded and initialized i915 [ 259.226] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 259.232] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 259.296] (II) intel(0): Setting screen physical size to 338 x 270 [ 259.307] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 259.311] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 259.311] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 259.311] (II) LoadModule: "evdev" [ 259.311] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 259.311] (II) Module evdev: vendor="X.Org Foundation" [ 259.311] compiled for 1.15.0, module version = 2.8.2 [ 259.311] Module class: X.Org XInput Driver [ 259.311] ABI class: X.Org XInput driver, version 20.0 [ 259.311] (II) Using input driver 'evdev' for 'Power Button' [ 259.311] (**) Power Button: always reports core events [ 259.311] (**) evdev: Power Button: Device: "/dev/input/event1" [ 259.311] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 259.311] (--) evdev: Power Button: Found keys [ 259.311] (II) evdev: Power Button: Configuring as keyboard [ 259.312] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 259.312] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 259.312] (**) Option "xkb_rules" "evdev" [ 259.312] (**) Option "xkb_model" "pc105" [ 259.312] (**) Option "xkb_layout" "it" [ 259.314] (II) XKB: reuse xkmfile /var/lib/xkb/server-3781FECB9CB8D26EE03343DB2C93394EA704B98F.xkm [ 259.315] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 259.315] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 259.315] (II) Using input driver 'evdev' for 'Sleep Button' [ 259.315] (**) Sleep Button: always reports core events [ 259.315] (**) evdev: Sleep Button: Device: "/dev/input/event0" [ 259.315] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 259.315] (--) evdev: Sleep Button: Found keys [ 259.315] (II) evdev: Sleep Button: Configuring as keyboard [ 259.315] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0" [ 259.315] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7) [ 259.315] (**) Option "xkb_rules" "evdev" [ 259.315] (**) Option "xkb_model" "pc105" [ 259.315] (**) Option "xkb_layout" "it" [ 259.315] (II) config/udev: Adding drm device (/dev/dri/card0) [ 259.315] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 259.316] (II) config/udev: Adding input device LITEON Technology USB Multimedia Keyboard (/dev/input/event2) [ 259.316] (**) LITEON Technology USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" [ 259.316] (II) Using input driver 'evdev' for 'LITEON Technology USB Multimedia Keyboard' [ 259.316] (**) LITEON Technology USB Multimedia Keyboard: always reports core events [ 259.316] (**) evdev: LITEON Technology USB Multimedia Keyboard: Device: "/dev/input/event2" [ 259.316] (--) evdev: LITEON Technology USB Multimedia Keyboard: Vendor 0x46d Product 0xc312 [ 259.316] (--) evdev: LITEON Technology USB Multimedia Keyboard: Found keys [ 259.316] (II) evdev: LITEON Technology USB Multimedia Keyboard: Configuring as keyboard [ 259.316] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input4/event2" [ 259.316] (II) XINPUT: Adding extended input device "LITEON Technology USB Multimedia Keyboard" (type: KEYBOARD, id 8) [ 259.316] (**) Option "xkb_rules" "evdev" [ 259.316] (**) Option "xkb_model" "pc105" [ 259.316] (**) Option "xkb_layout" "it" [ 259.316] (II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse v2.0 (/dev/input/event3) [ 259.316] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall" [ 259.317] (II) Using input driver 'evdev' for 'Microsoft Microsoft Basic Optical Mouse v2.0 ' [ 259.317] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : always reports core events [ 259.317] (**) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event3" [ 259.317] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Vendor 0x45e Product 0xcb [ 259.317] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons [ 259.317] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s) [ 259.317] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found relative axes [ 259.317] (--) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes [ 259.317] (II) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Configuring as mouse [ 259.317] (II) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support [ 259.317] (**) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5 [ 259.317] (**) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 259.317] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input12/event3" [ 259.317] (II) XINPUT: Adding extended input device "Microsoft Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 9) [ 259.317] (II) evdev: Microsoft Microsoft Basic Optical Mouse v2.0 : initialized for relative axes. [ 259.317] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1 [ 259.317] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0 [ 259.317] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000 [ 259.317] (**) Microsoft Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4 [ 259.317] (II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse v2.0 (/dev/input/mouse0) [ 259.317] (II) No input driver specified, ignoring this device. [ 259.317] (II) This device may have been added with another device file. [ 259.317] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event5) [ 259.317] (II) No input driver specified, ignoring this device. [ 259.317] (II) This device may have been added with another device file. [ 259.318] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event4) [ 259.318] (II) No input driver specified, ignoring this device. [ 259.318] (II) This device may have been added with another device file. [ 259.318] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8) [ 259.318] (II) No input driver specified, ignoring this device. [ 259.318] (II) This device may have been added with another device file. [ 259.318] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event7) [ 259.318] (II) No input driver specified, ignoring this device. [ 259.318] (II) This device may have been added with another device file. [ 259.318] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6) [ 259.318] (II) No input driver specified, ignoring this device. [ 259.318] (II) This device may have been added with another device file. [ 261.728] (II) intel(0): EDID vendor "BNQ", prod id 30344 [ 261.728] (II) intel(0): Using EDID range info for horizontal sync [ 261.728] (II) intel(0): Using EDID range info for vertical refresh [ 261.728] (II) intel(0): Printing DDC gathered Modelines: [ 261.728] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 261.728] (II) intel(0): Modeline "640x350"x0.0 25.17 640 656 752 800 350 387 389 449 +hsync -vsync (31.5 kHz e) [ 261.728] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 261.728] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 261.728] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 261.728] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 261.728] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 261.728] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 261.728] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 261.728] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 261.728] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 261.728] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 261.728] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 261.728] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 261.728] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 261.728] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 261.728] (II) intel(0): Modeline "1280x1024"x76.0 141.82 1280 1376 1512 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz e) [ 261.728] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz e) [ 261.782] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 262.053] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 270.345] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 270.626] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 270.897] (II) XKB: reuse xkmfile /var/lib/xkb/server-095B7959759E4B169CF2219AE005994AD38D585B.xkm [ 270.930] (II) XKB: reuse xkmfile /var/lib/xkb/server-095B7959759E4B169CF2219AE005994AD38D585B.xkm [ 270.976] (II) XKB: reuse xkmfile /var/lib/xkb/server-3781FECB9CB8D26EE03343DB2C93394EA704B98F.xkm [ 271.183] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 271.360] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 271.646] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 272.395] (II) XKB: generating xkmfile /var/lib/xkb/server-6AE5D63520F86A8BC3268922894FD7F96F15C9A1.xkm [ 286.905] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 288.976] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 289.263] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 289.560] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 289.859] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 290.152] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 290.448] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 290.741] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 291.029] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 291.299] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 291.589] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 291.877] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 292.151] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 292.445] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 293.080] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 293.357] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 293.649] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 293.937] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 294.230] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 295.798] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 296.074] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 296.353] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 296.631] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 296.925] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 297.202] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 297.481] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 297.762] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 298.042] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 298.340] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 298.638] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 298.934] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 299.225] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 299.497] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 300.174] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 300.449] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 300.729] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 301.005] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 301.286] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 301.589] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 301.919] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 302.193] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 302.468] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 302.741] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 303.030] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 303.326] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 303.615] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 303.894] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 304.182] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 304.457] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 304.733] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 305.009] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 305.288] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 305.561] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 305.833] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 306.109] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 306.389] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 306.665] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 306.845] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 307.250] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 307.529] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 307.801] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 308.004] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 308.381] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 308.686] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 308.968] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 309.250] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 309.545] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 309.841] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 310.118] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 310.393] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 310.687] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 310.975] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 311.250] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 311.530] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 311.829] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 312.109] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 312.388] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 312.692] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 312.891] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 313.260] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 313.540] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 313.842] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 314.116] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 314.431] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 314.730] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 315.043] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 315.343] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 315.645] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 315.923] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 316.198] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 316.493] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 316.805] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 317.081] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 317.358] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 317.634] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 317.915] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 318.209] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 318.509] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 318.785] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 319.072] (II) intel(0): switch to mode 1280x1024@76.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none