[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.0_kcloud_04fcbf_20140516+ (root@x-kcloud2) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #26 SMP Fri May 16 16:00:00 EDT 2014 [ 0.000000] Command line: BOOT_IMAGE=kernels//kcloud/04fcbfc9ac8c61fd40eb7ae9e49ba178192c81f0/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/04fcbfc9ac8c61fd40eb7ae9e49ba178192c81f0/modules_x86_64/lib/modules/3.14.0_kcloud_04fcbf_20140516+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0xda662ddb [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a7f0afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a7f0b000-0x00000000a7f28fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a7f29000-0x00000000aaf4dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aaf4e000-0x00000000ab5b5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ab5b6000-0x00000000ab7b5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00AD000000 mask 7FFF000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x031f7000, 0x031f7fff] PGTABLE [ 0.000000] BRK [0x031f8000, 0x031f8fff] PGTABLE [ 0.000000] BRK [0x031f9000, 0x031f9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff] [ 0.000000] [mem 0x14f600000-0x14f7fffff] page 2M [ 0.000000] BRK [0x031fa000, 0x031fafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff] [ 0.000000] [mem 0x14c000000-0x14f5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G [ 0.000000] [mem 0x140000000-0x14bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xa7f0afff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xa7dfffff] page 2M [ 0.000000] [mem 0xa7e00000-0xa7f0afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xa7f29000-0xaaf4dfff] [ 0.000000] [mem 0xa7f29000-0xa7ffffff] page 4k [ 0.000000] [mem 0xa8000000-0xaadfffff] page 2M [ 0.000000] [mem 0xaae00000-0xaaf4dfff] page 4k [ 0.000000] BRK [0x031fb000, 0x031fbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff] [ 0.000000] [mem 0xab7e2000-0xab7fefff] page 4k [ 0.000000] BRK [0x031fc000, 0x031fcfff] PGTABLE [ 0.000000] ACPI: RSDP 0x00000000AB7E1014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000AB7C9188 000114 (v01 INTEL BDW-ULT 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000AB7D7000 0000F4 (v05 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: DSDT 0x00000000A7F0B000 01DFE9 (v02 INTEL BDW 00000000 INTL 20130927) [ 0.000000] ACPI: FACS 0x00000000AB799000 000040 [ 0.000000] ACPI: TCPA 0x00000000AB7DF000 000032 (v02 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: UEFI 0x00000000AB79C000 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000AB7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7DD000 00004E (v01 MeSsdt MeSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: TPM2 0x00000000AB7DC000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000AB7DB000 0005B1 (v01 Intel PerfTune 00001000 INTL 20130927) [ 0.000000] ACPI: DBGP 0x00000000AB7DA000 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x00000000AB7D9000 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: LPIT 0x00000000AB7D8000 000094 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: HPET 0x00000000AB7D6000 000038 (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: APIC 0x00000000AB7D5000 0000BC (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: MCFG 0x00000000AB7D4000 00003C (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: WDAT 0x00000000AB7D3000 000104 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000AB7D2000 000250 (v01 INTEL sensrhub 00000000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CF000 002E26 (v01 INTEL PtidDevc 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CE000 000C7D (v01 INTEL Ther_Rvp 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CD000 00017F (v01 INTEL zpodd 00001000 INTL 20130927) [ 0.000000] ACPI: BOOT 0x00000000AB7CC000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000AB7CB000 00053B (v01 PmRef Cpu0Ist 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CA000 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7C2000 006F06 (v01 SaSsdt SaSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927) [ 0.000000] ACPI: PCCT 0x00000000AB7C1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7C0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: CSRT 0x00000000AB7BF000 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: DMAR 0x00000000AB7BE000 0000F0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: FPDT 0x00000000AB7BD000 000044 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: ASF! 0x00000000AB7BC000 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: BGRT 0x00000000AB7BB000 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff] [ 0.000000] NODE_DATA [mem 0x14f7fa000-0x14f7fdfff] [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x14f7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00057fff] [ 0.000000] node 0: [mem 0x00059000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xa7f0afff] [ 0.000000] node 0: [mem 0xa7f29000-0xaaf4dfff] [ 0.000000] node 0: [mem 0xab7e2000-0xab7fefff] [ 0.000000] node 0: [mem 0x100000000-0x14f7fffff] [ 0.000000] On node 0 totalpages: 1025770 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10878 pages used for memmap [ 0.000000] DMA32 zone: 696141 pages, LIFO batch:31 [ 0.000000] Normal zone: 5088 pages used for memmap [ 0.000000] Normal zone: 325632 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xad800000-0xaf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa7f0b000-0xa7f28fff] [ 0.000000] PM: Registered nosave memory: [mem 0xaaf4e000-0xab5b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab5b6000-0xab7b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014f400000 s74624 r8192 d23680 u262144 [ 0.000000] pcpu-alloc: s74624 r8192 d23680 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1009714 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//kcloud/04fcbfc9ac8c61fd40eb7ae9e49ba178192c81f0/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/04fcbfc9ac8c61fd40eb7ae9e49ba178192c81f0/modules_x86_64/lib/modules/3.14.0_kcloud_04fcbf_20140516+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0xda662ddb [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3935620K/4103080K available (7258K kernel code, 722K rwdata, 3564K rodata, 22584K init, 600K bss, 167460K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:1016 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1795.646 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.29 BogoMIPS (lpj=1795646) [ 0.000008] pid_max: default: 32768 minimum: 301 [ 0.000016] ACPI: Core revision 20140214 [ 0.030610] ACPI: All ACPI Tables successfully acquired [ 0.030638] Security Framework initialized [ 0.030935] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.031927] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.032374] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.032383] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.032608] CPU: Physical Processor ID: 0 [ 0.032611] CPU: Processor Core ID: 0 [ 0.033824] mce: CPU supports 7 MCE banks [ 0.033837] CPU0: Thermal LVT vector (0xfa) already installed [ 0.033847] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.033847] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.033847] tlb_flushall_shift: 6 [ 0.034307] Freeing SMP alternatives memory: 32K (ffffffff83158000 - ffffffff83160000) [ 0.034985] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.044985] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04) [ 0.044996] TSC deadline timer enabled [ 0.045004] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.045013] ... version: 3 [ 0.045015] ... bit width: 48 [ 0.045017] ... generic registers: 4 [ 0.045019] ... value mask: 0000ffffffffffff [ 0.045022] ... max period: 0000ffffffffffff [ 0.045024] ... fixed-purpose events: 3 [ 0.045026] ... event mask: 000000070000000f [ 0.045267] x86: Booting SMP configuration: [ 0.045270] .... node #0, CPUs: #1 [ 0.057634] CPU1: Thermal LVT vector (0xfa) already installed [ 0.059760] #2<7>[ 0.072308] CPU2: Thermal LVT vector (0xfa) already installed [ 0.086799] #3 [ 0.086799] CPU3: Thermal LVT vector (0xfa) already installed [ 0.088876] x86: Booted up 1 node, 4 CPUs [ 0.088883] smpboot: Total of 4 processors activated (14365.16 BogoMIPS) [ 0.094047] devtmpfs: initialized [ 0.094441] PM: Registering ACPI NVS region [mem 0xab5b6000-0xab7b5fff] (2097152 bytes) [ 0.094563] xor: automatically using best checksumming function: [ 0.103793] avx : 17336.000 MB/sec [ 0.103820] RTC time: 20:35:20, date: 05/16/14 [ 0.103868] NET: Registered protocol family 16 [ 0.104106] cpuidle: using governor ladder [ 0.104108] cpuidle: using governor menu [ 0.104241] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.104245] ACPI: bus type PCI registered [ 0.104278] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.104282] PCI: not using MMCONFIG [ 0.104285] PCI: Using configuration type 1 for base access [ 0.124833] raid6: sse2x1 5367 MB/s [ 0.141850] raid6: sse2x2 6597 MB/s [ 0.158866] raid6: sse2x4 7945 MB/s [ 0.175888] raid6: avx2x1 10515 MB/s [ 0.192910] raid6: avx2x2 12312 MB/s [ 0.209936] raid6: avx2x4 14410 MB/s [ 0.209939] raid6: using algorithm avx2x4 (14410 MB/s) [ 0.209941] raid6: using avx2x2 recovery algorithm [ 0.209983] ACPI: Added _OSI(Module Device) [ 0.209986] ACPI: Added _OSI(Processor Device) [ 0.209988] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.209991] ACPI: Added _OSI(Processor Aggregator Device) [ 0.223125] ACPI: Executed 18 blocks of module-level executable AML code [ 0.252112] ACPI: SSDT 0x00000000AB57CA18 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.253056] ACPI: Dynamic OEM Table Load: [ 0.253060] ACPI: SSDT 0x0000000000000000 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.258272] ACPI: SSDT 0x00000000AB57D818 000792 (v01 PmRef ApIst 00003000 INTL 20130927) [ 0.259500] ACPI: Dynamic OEM Table Load: [ 0.259504] ACPI: SSDT 0x0000000000000000 000792 (v01 PmRef ApIst 00003000 INTL 20130927) [ 0.264121] ACPI: SSDT 0x00000000AB57BD98 000119 (v01 PmRef ApCst 00003000 INTL 20130927) [ 0.265068] ACPI: Dynamic OEM Table Load: [ 0.265071] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20130927) [ 0.273422] ACPI: Interpreter enabled [ 0.273433] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 0.273443] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 0.273470] ACPI: (supports S0 S3 S4 S5) [ 0.273472] ACPI: Using IOAPIC for interrupt routing [ 0.273499] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.275904] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.286737] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.287262] ACPI: Power Resource [PG00] (on) [ 0.294388] ACPI: Power Resource [PG01] (on) [ 0.300399] ACPI: Power Resource [PG02] (on) [ 0.330548] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.331921] ACPI: Power Resource [FN00] (off) [ 0.332004] ACPI: Power Resource [FN01] (off) [ 0.332085] ACPI: Power Resource [FN02] (off) [ 0.332164] ACPI: Power Resource [FN03] (off) [ 0.332247] ACPI: Power Resource [FN04] (off) [ 0.333361] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.333370] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.333896] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.334498] PCI host bridge to bus 0000:00 [ 0.334503] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.334506] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.334510] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.334513] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.334517] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff] [ 0.334530] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.334794] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.334809] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit] [ 0.334818] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.334824] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.335075] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.335084] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit] [ 0.335359] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.335379] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit] [ 0.335460] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.335665] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.335713] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.335733] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit] [ 0.335798] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.336045] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.336063] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff] [ 0.336071] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff] [ 0.336080] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.336142] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.336349] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.336402] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.336745] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.336761] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.336769] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.336777] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.336785] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.336792] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.336800] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff] [ 0.336838] pci 0000:00:1f.2: PME# supported from D3hot [ 0.337068] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.337084] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit] [ 0.337105] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.337358] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.337387] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit] [ 0.337696] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.339797] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.339856] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.339912] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.339966] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.340020] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 0.340074] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.340128] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.340182] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.340456] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.340701] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.340812] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.340816] vgaarb: loaded [ 0.340818] vgaarb: bridge control possible 0000:00:02.0 [ 0.340899] SCSI subsystem initialized [ 0.340958] libata version 3.00 loaded. [ 0.341003] ACPI: bus type USB registered [ 0.341036] usbcore: registered new interface driver usbfs [ 0.341052] usbcore: registered new interface driver hub [ 0.341098] usbcore: registered new device driver usb [ 0.341150] pps_core: LinuxPPS API ver. 1 registered [ 0.341154] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.341167] PTP clock support registered [ 0.341257] PCI: Using ACPI for IRQ routing [ 0.347365] PCI: pci_cache_line_size set to 64 bytes [ 0.347392] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.347394] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.347396] e820: reserve RAM buffer [mem 0xa7f0b000-0xa7ffffff] [ 0.347398] e820: reserve RAM buffer [mem 0xaaf4e000-0xabffffff] [ 0.347400] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff] [ 0.347401] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff] [ 0.347519] NetLabel: Initializing [ 0.347522] NetLabel: domain hash size = 128 [ 0.347524] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.347539] NetLabel: unlabeled traffic allowed by default [ 0.347691] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.347699] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.349726] Switched to clocksource hpet [ 0.349778] pnp: PnP ACPI init [ 0.349788] ACPI: bus type PNP registered [ 0.350118] system 00:00: [io 0x06a4] has been reserved [ 0.350122] system 00:00: [io 0x06a0] has been reserved [ 0.350127] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.350265] pnp 00:01: [dma 4] [ 0.350292] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.350321] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.350439] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.350503] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.350508] system 00:04: [io 0xffff] has been reserved [ 0.350511] system 00:04: [io 0xffff] has been reserved [ 0.350514] system 00:04: [io 0xffff] has been reserved [ 0.350518] system 00:04: [io 0x1800-0x18fe] could not be reserved [ 0.350521] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.350525] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.350581] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.350626] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.350630] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.350799] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.350975] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.351700] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.351705] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.351709] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.351712] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.351716] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.351719] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved [ 0.351735] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.351739] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.351857] pnp 00:0a: Plug and Play ACPI device, IDs INT3437 (active) [ 0.352070] pnp 00:0b: unknown resource type 18 in _CRS [ 0.352074] pnp 00:0b: can't evaluate _CRS: 1 [ 0.352109] pnp 00:0b: Plug and Play ACPI device, IDs INT3432 (active) [ 0.352711] pnp 00:0c: unknown resource type 18 in _CRS [ 0.352715] pnp 00:0c: can't evaluate _CRS: 1 [ 0.352765] pnp 00:0c: Plug and Play ACPI device, IDs INT3433 (active) [ 0.353275] pnp 00:0d: unknown resource type 18 in _CRS [ 0.353279] pnp 00:0d: can't evaluate _CRS: 1 [ 0.353323] pnp 00:0d: Plug and Play ACPI device, IDs INT3435 (active) [ 0.353767] system 00:0e: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.353771] system 00:0e: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.353775] system 00:0e: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.353778] system 00:0e: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.353782] system 00:0e: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.353785] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.353789] system 00:0e: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.353792] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.353796] system 00:0e: [mem 0xff000000-0xffffffff] could not be reserved [ 0.353799] system 00:0e: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.353803] system 00:0e: [mem 0xaf810000-0xaf81ffff] has been reserved [ 0.353806] system 00:0e: [mem 0xaf800000-0xaf80ffff] has been reserved [ 0.353810] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.354105] system 00:0f: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.354109] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.354260] pnp: PnP ACPI: found 16 devices [ 0.354263] ACPI: bus type PNP unregistered [ 0.361082] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.361086] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.361090] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.361093] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xfeafffff] [ 0.361119] NET: Registered protocol family 2 [ 0.361282] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.361373] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.361444] TCP: Hash tables configured (established 32768 bind 32768) [ 0.361468] TCP: reno registered [ 0.361477] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.361495] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.361546] NET: Registered protocol family 1 [ 0.361612] RPC: Registered named UNIX socket transport module. [ 0.361616] RPC: Registered udp transport module. [ 0.361618] RPC: Registered tcp transport module. [ 0.361620] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.361629] pci 0000:00:02.0: Boot video device [ 0.361729] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.361734] pci 0000:00:14.0: PCI INT A: no GSI [ 0.361828] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.361846] PCI: CLS 0 bytes, default 64 [ 0.877964] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.877972] software IO TLB [mem 0xa3f0b000-0xa7f0b000] (64MB) mapped at [ffff8800a3f0b000-ffff8800a7f0afff] [ 0.878122] Simple Boot Flag at 0x47 set to 0x1 [ 0.878979] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.879016] audit: initializing netlink subsys (disabled) [ 0.879028] audit: type=2000 audit(1400272519.833:1): initialized [ 0.910301] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.912593] VFS: Disk quotas dquot_6.5.2 [ 0.912637] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.913516] NFS: Registering the id_resolver key type [ 0.913536] Key type id_resolver registered [ 0.913539] Key type id_legacy registered [ 0.913545] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.913717] fuse init (API version 7.23) [ 0.913832] msgmni has been set to 7686 [ 0.914063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.914070] io scheduler noop registered [ 0.914072] io scheduler deadline registered [ 0.914114] io scheduler cfq registered (default) [ 0.914202] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.914262] efifb: probing for efifb [ 0.914686] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010800000, using 8100k, total 8100k [ 0.914690] efifb: mode is 1920x1080x32, linelength=7680, pages=2032 [ 0.914692] efifb: scrolling: redraw [ 0.914695] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.921434] Console: switching to colour frame buffer device 240x67 [ 0.927728] fb0: EFI VGA frame buffer device [ 0.927856] ACPI: Fan [FAN0] (off) [ 0.927915] ACPI: Fan [FAN1] (off) [ 0.927975] ACPI: Fan [FAN2] (off) [ 0.928033] ACPI: Fan [FAN3] (off) [ 0.928088] ACPI: Fan [FAN4] (off) [ 0.928493] Monitor-Mwait will be used to enter C-1 state [ 0.930310] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.930344] ACPI: Thermal Zone [TZ00] (45 C) [ 0.931089] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.931122] ACPI: Thermal Zone [TZ01] (45 C) [ 0.931193] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.951884] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.952444] Non-volatile memory driver v1.3 [ 0.952470] Linux agpgart interface v0.103 [ 0.953879] brd: module loaded [ 0.954011] Loading iSCSI transport class v2.0-870. [ 0.954187] iscsi: registered transport (tcp) [ 0.954285] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.954328] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.954432] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k. [ 0.954515] iscsi: registered transport (qla4xxx) [ 0.954558] QLogic iSCSI HBA Driver [ 0.954605] DC390: clustering now enabled by default. If you get problems load [ 0.954643] with "disable_clustering=1" and report to maintainers [ 0.954704] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.954769] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.954810] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.954874] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.954924] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.954924] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.955044] SCSI Media Changer driver v0.25 [ 0.955093] ahci 0000:00:1f.2: version 3.0 [ 0.955219] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X [ 0.965543] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode [ 0.965588] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.966085] scsi0 : ahci [ 0.966208] scsi1 : ahci [ 0.966307] scsi2 : ahci [ 0.966404] scsi3 : ahci [ 0.967812] ata1: DUMMY [ 0.969149] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56 [ 0.970512] ata3: DUMMY [ 0.971855] ata4: DUMMY [ 0.974232] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 0.975663] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 0.977121] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.978530] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.979971] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.981382] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.982806] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.984220] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.985778] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.987220] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X [ 1.150898] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.152321] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4 [ 1.153766] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.155237] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.156698] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 1.158151] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.159626] usbcore: registered new interface driver catc [ 1.161071] usbcore: registered new interface driver kaweth [ 1.162482] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.163920] usbcore: registered new interface driver pegasus [ 1.165364] usbcore: registered new interface driver rtl8150 [ 1.166790] usbcore: registered new interface driver asix [ 1.168192] usbcore: registered new interface driver ax88179_178a [ 1.169591] usbcore: registered new interface driver cdc_ether [ 1.170992] usbcore: registered new interface driver dm9601 [ 1.172397] usbcore: registered new interface driver gl620a [ 1.173806] usbcore: registered new interface driver net1080 [ 1.175217] usbcore: registered new interface driver plusb [ 1.176612] usbcore: registered new interface driver rndis_host [ 1.177994] usbcore: registered new interface driver cdc_subset [ 1.179358] usbcore: registered new interface driver zaurus [ 1.180709] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.182062] usbcore: registered new interface driver cdc_ncm [ 1.183471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.184796] ehci-pci: EHCI PCI platform driver [ 1.186140] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.187480] ohci-pci: OHCI PCI platform driver [ 1.188823] uhci_hcd: USB Universal Host Controller Interface driver [ 1.190268] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 1.191623] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 1.192975] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.194327] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.195729] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.195746] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X [ 1.195804] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.197128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.198444] usb usb1: Product: xHCI Host Controller [ 1.199743] usb usb1: Manufacturer: Linux 3.14.0_kcloud_04fcbf_20140516+ xhci_hcd [ 1.201054] usb usb1: SerialNumber: 0000:00:14.0 [ 1.202484] hub 1-0:1.0: USB hub found [ 1.203794] hub 1-0:1.0: 11 ports detected [ 1.208589] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.209913] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.211239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.212529] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.213808] usb usb2: Product: xHCI Host Controller [ 1.215071] usb usb2: Manufacturer: Linux 3.14.0_kcloud_04fcbf_20140516+ xhci_hcd [ 1.216339] usb usb2: SerialNumber: 0000:00:14.0 [ 1.217742] hub 2-0:1.0: USB hub found [ 1.219039] hub 2-0:1.0: 4 ports detected [ 1.221737] usbcore: registered new interface driver usb-storage [ 1.223109] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.224434] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.226191] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.227636] mousedev: PS/2 mouse device common for all mice [ 1.229090] rtc_cmos 00:05: RTC can wake from S4 [ 1.230567] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.231917] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.233254] i2c /dev entries driver [ 1.234618] hidraw: raw HID events driver (C) Jiri Kosina [ 1.236139] usbcore: registered new interface driver usbhid [ 1.237461] usbhid: USB HID core driver [ 1.238826] TCP: cubic registered [ 1.240112] Initializing XFRM netlink socket [ 1.241393] NET: Registered protocol family 17 [ 1.242681] Key type dns_resolver registered [ 1.244333] registered taskstats version 1 [ 1.246036] Btrfs loaded [ 1.247572] Magic number: 14:347:599 [ 1.248817] serial8250 serial8250: hash matches [ 1.250160] PM: Hibernation image not present or could not be loaded. [ 1.250177] Warning: unable to open an initial console. [ 1.267512] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.279426] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.280959] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133 [ 1.282244] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.283834] ata2.00: configured for UDMA/133 [ 1.285240] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BB24 D201 PQ: 0 ANSI: 5 [ 1.286788] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.286803] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.289580] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.291002] sd 1:0:0:0: [sda] Write Protect is off [ 1.292401] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.292415] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.295321] sda: sda1 sda2 sda3 [ 1.297020] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.302899] Freeing unused kernel memory: 22584K (ffffffff81b4a000 - ffffffff83158000) [ 1.340066] dracut: dracut-018-35.git20120510.fc17 [ 1.370182] udevd[1410]: starting version 182 [ 1.387095] [drm] Initialized drm 1.1.0 20060810 [ 1.390097] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.395621] ACPI: Lid Switch [LID0] [ 1.397569] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.399390] ACPI: Power Button [PWRB] [ 1.401186] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 1.403104] ACPI: Sleep Button [SLPB] [ 1.403184] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.403340] ACPI: Power Button [PWRF] [ 1.406177] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi, [ 1.406177] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH [ 1.406642] [drm] Memory usable by graphics device = 4096M [ 1.406643] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.406644] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.406646] checking generic (b0000000 7e9000) vs hw (b0000000 10000000) [ 1.406647] fb: switching to inteldrmfb from EFI VGA [ 1.418461] Console: switching to colour dummy device 80x25 [ 1.431874] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab77b018 [ 1.431886] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.431888] [drm:intel_opregion_setup] SWSCI supported [ 1.437362] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 1.437364] [drm:intel_opregion_setup] ASLE supported [ 1.437403] i915 0000:00:02.0: irq 59 for MSI/MSI-X [ 1.437413] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.437417] [drm] Driver supports precise vblank timestamp query. [ 1.437420] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.437422] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 1.437425] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.437427] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.437429] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 1.437432] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.437435] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa [ 1.437437] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c [ 1.437440] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.437442] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.437445] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.437447] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.437449] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.437451] [drm:parse_mipi] No MIPI config BDB found [ 1.437454] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.437456] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.437458] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.437460] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 1.437461] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.437463] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 1.437512] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.437517] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000 [ 1.437520] [drm:intel_display_power_get] enabling always-on [ 1.437521] [drm:intel_display_power_get] enabling display [ 1.437525] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.437583] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.437585] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 1.437586] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 1.437588] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 1.437590] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.437591] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.437593] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 1.437595] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 1.437596] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 1.437598] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.437600] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.437601] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 1.437603] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 1.437605] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 1.437606] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.437609] [drm:intel_modeset_init] 3 display pipes available. [ 1.437625] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz [ 1.437930] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.437979] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 1.437983] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.437986] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.437988] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.437990] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.438082] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 1.438090] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.438357] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00 [ 1.438522] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.450180] random: nonblocking pool is initialized [ 1.461039] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.461040] [drm] VBT doesn't support DRRS [ 1.461075] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered [ 1.461083] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.461117] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.466359] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled [ 1.466362] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 1.466364] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled [ 1.466367] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000 [ 1.466372] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A [ 1.466374] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A [ 1.466377] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A [ 1.466380] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled [ 1.466382] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-1] hw state readout: disabled [ 1.466384] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:HDMI-A-1] hw state readout: disabled [ 1.466386] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled [ 1.466389] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A [ 1.466391] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.466392] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.466395] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.466397] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.466399] [drm:intel_dump_pipe_config] requested mode: [ 1.466402] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 1.466403] [drm:intel_dump_pipe_config] adjusted mode: [ 1.466406] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.466408] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 1.466410] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.466412] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.466414] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.466416] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.466417] [drm:intel_dump_pipe_config] ips: 0 [ 1.466418] [drm:intel_dump_pipe_config] double wide: 0 [ 1.466421] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B [ 1.466422] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.466423] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.466426] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.466428] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.466429] [drm:intel_dump_pipe_config] requested mode: [ 1.466431] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.466433] [drm:intel_dump_pipe_config] adjusted mode: [ 1.466435] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.466437] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.466439] [drm:intel_dump_pipe_config] port clock: 0 [ 1.466440] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.466442] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.466444] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.466445] [drm:intel_dump_pipe_config] ips: 0 [ 1.466446] [drm:intel_dump_pipe_config] double wide: 0 [ 1.466448] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C [ 1.466450] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.466451] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.466453] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.466455] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.466456] [drm:intel_dump_pipe_config] requested mode: [ 1.466459] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.466460] [drm:intel_dump_pipe_config] adjusted mode: [ 1.466462] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.466465] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.466466] [drm:intel_dump_pipe_config] port clock: 0 [ 1.466467] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.466469] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.466471] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.466472] [drm:intel_dump_pipe_config] ips: 0 [ 1.466473] [drm:intel_dump_pipe_config] double wide: 0 [ 1.466479] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 1.466483] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 1.466485] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 1.466487] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 1.466489] [drm:check_crtc_state] [CRTC:5] [ 1.466495] [drm:check_crtc_state] [CRTC:8] [ 1.466498] [drm:check_crtc_state] [CRTC:11] [ 1.466503] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.466506] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.466508] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.466512] [drm:intel_alloc_plane_obj] plane fb obj ffff8800aa830600 [ 1.466514] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.466516] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.469743] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 1.469746] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 1.469748] [drm:i915_gem_context_init] HW context support initialized [ 1.469766] [drm:init_status_page] render ring hws offset: 0x007fb000 [ 1.469848] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000 [ 1.469853] [drm:init_status_page] bsd ring hws offset: 0x0081d000 [ 1.469924] [drm:init_status_page] blitter ring hws offset: 0x0083e000 [ 1.469985] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000 [ 1.470214] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] [ 1.470217] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 1.470226] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.470230] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] probed modes : [ 1.470234] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.470236] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 1.470238] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-1] [ 1.470240] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 1.470245] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:DP-1] disconnected [ 1.470247] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:HDMI-A-1] [ 1.470249] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 1.470403] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.470405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.470408] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:HDMI-A-1] disconnected [ 1.470410] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] [ 1.470411] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2] [ 1.470569] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.470571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.470573] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected [ 1.470574] [drm:drm_setup_crtcs] [ 1.470576] [drm:drm_enable_connectors] connector 14 enabled? yes [ 1.470578] [drm:drm_enable_connectors] connector 23 enabled? no [ 1.470579] [drm:drm_enable_connectors] connector 24 enabled? no [ 1.470581] [drm:drm_enable_connectors] connector 26 enabled? no [ 1.470583] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.470585] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 1.470588] [drm:intel_fb_initial_config] connector eDP-1 on pipe 65 [CRTC:5]: 1920x1080 [ 1.470589] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.470591] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.470593] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.470595] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5 [ 1.470597] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.470599] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 1.470601] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400 [ 1.471921] [drm:intelfb_create] allocated 1920x1080 fb: 0x00880000, bo ffff8800aa831680 [ 1.471999] fbcon: inteldrmfb (fb0) is primary device [ 1.472050] [drm:intel_crtc_cursor_set] cursor off [ 1.472053] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 1.472055] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.472058] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.472062] [drm:drm_mode_debug_printmodeline] Modeline 28:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.472063] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 1.472065] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 1.472068] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.472070] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains [ 1.472073] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 1.472080] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.472081] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 1.472083] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.472085] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 1.472085] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.472086] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.472088] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.472089] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.472090] [drm:intel_dump_pipe_config] requested mode: [ 1.472092] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.472093] [drm:intel_dump_pipe_config] adjusted mode: [ 1.472094] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.472097] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 1.472097] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.472098] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.472099] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.472100] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.472101] [drm:intel_dump_pipe_config] ips: 1 [ 1.472102] [drm:intel_dump_pipe_config] double wide: 0 [ 1.477348] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.477352] [drm:intel_edp_backlight_off] [ 1.493498] [drm:intel_edp_panel_off] Turn eDP power off [ 1.561334] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 1.678276] [drm:wait_panel_off] Wait for panel power off time [ 1.678280] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1.728661] usb 1-1: New USB device found, idVendor=046d, idProduct=c077 [ 1.728663] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.728664] usb 1-1: Product: USB Optical Mouse [ 1.728666] usb 1-1: Manufacturer: Logitech [ 1.728753] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.730622] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0001/input/input5 [ 1.730755] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0 [ 1.733255] [drm:wait_panel_status] Wait complete [ 1.733259] [drm:intel_update_fbc] no output, disabling [ 1.733264] [drm:intel_display_power_put] disabling display [ 1.733265] [drm:hsw_set_power_well] Requesting to disable the power well [ 1.733276] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680 [ 1.733283] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080] [ 1.733284] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A [ 1.733286] [drm:intel_edp_panel_on] Turn eDP power on [ 1.733289] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.879237] tsc: Refined TSC clocksource calibration: 1795.845 MHz [ 1.883214] usb 1-5: new low-speed USB device number 3 using xhci_hcd [ 2.052051] usb 1-5: New USB device found, idVendor=413c, idProduct=2107 [ 2.052052] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.052054] usb 1-5: Product: Dell USB Entry Keyboard [ 2.052055] usb 1-5: Manufacturer: DELL [ 2.052146] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.055272] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:413C:2107.0002/input/input6 [ 2.055364] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-5/input0 [ 2.279059] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 2.279061] [drm:wait_panel_status] Wait complete [ 2.279064] [drm:wait_panel_on] Wait for panel power on [ 2.279066] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 2.487980] [drm:wait_panel_status] Wait complete [ 2.487983] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 2.487989] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 2.489062] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.489518] [drm:intel_dp_start_link_train] clock recovery OK [ 2.490276] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 2.490480] [drm:intel_edp_backlight_on] [ 2.490484] [drm:intel_panel_enable_backlight] pipe A [ 2.490488] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 2.490491] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 2.509972] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 2.509976] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 2.509979] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 2.509981] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 2.509982] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 2.509983] [drm:check_crtc_state] [CRTC:5] [ 2.509989] [drm:check_crtc_state] [CRTC:8] [ 2.509990] [drm:check_crtc_state] [CRTC:11] [ 2.509992] [drm:intel_crtc_cursor_set] cursor off [ 2.509993] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.509995] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.509997] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.509998] [drm:intel_crtc_cursor_set] cursor off [ 2.509999] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.510000] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.510001] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.510005] Console: switching to colour frame buffer device 240x67 [ 2.510012] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.510013] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.510015] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.517507] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.517541] i915 0000:00:02.0: registered panic notifier [ 2.524450] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.525058] acpi device:16: registered as cooling_device9 [ 2.525220] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 2.525415] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.529564] dracut: Starting plymouth daemon [ 2.537149] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.537153] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.537155] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.547043] [drm:i915_gem_open] [ 2.547068] [drm:intel_crtc_cursor_set] cursor off [ 2.547071] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.547075] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.547078] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.547080] [drm:intel_crtc_cursor_set] cursor off [ 2.547081] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.547083] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.547085] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.547087] [drm:intel_crtc_cursor_set] cursor off [ 2.547089] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.547091] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.547092] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.547102] [drm:i915_gem_open] [ 2.547110] [drm:intel_crtc_cursor_set] cursor off [ 2.547112] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.547114] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.547116] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.547118] [drm:intel_crtc_cursor_set] cursor off [ 2.547119] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.547121] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.547123] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.547124] [drm:intel_crtc_cursor_set] cursor off [ 2.547126] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.547128] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.547129] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.547136] [drm:i915_gem_open] [ 2.547386] [drm:intel_crtc_cursor_set] cursor off [ 2.547391] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.547394] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.547397] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.547400] [drm:intel_crtc_cursor_set] cursor off [ 2.547402] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.547405] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.547408] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.547410] [drm:intel_crtc_cursor_set] cursor off [ 2.547412] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.547415] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.547418] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.547574] dracut: error: unexpectedly disconnected from boot status daemon [ 2.553196] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.553199] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.553201] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.613881] ACPI: AC Adapter [ADP1] (on-line) [ 2.640168] ACPI: Battery Slot [BAT0] (battery present) [ 2.640271] ACPI: Battery Slot [BAT1] (battery absent) [ 2.640434] ACPI: Battery Slot [BAT2] (battery absent) [ 2.652238] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 2.652444] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258) [ 2.652621] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.652781] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.653127] [drm:intel_display_power_get] enabling display [ 2.653132] [drm:hsw_set_power_well] Enabling power well [ 2.653168] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X [ 2.654330] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 2.655508] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.655578] EXT4-fs (sda2): write access will be enabled during recovery [ 2.671102] iTCO_vendor_support: vendor-support=0 [ 2.671320] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.671408] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 2.671657] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.676165] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.676169] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.676172] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.689189] ppdev: user-space parallel port driver [ 2.730951] EXT4-fs (sda2): recovery complete [ 2.733221] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.750916] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.760734] dracut: Checking ext4: /dev/sda2 [ 2.762955] dracut: issuing e2fsck -a /dev/sda2 [ 2.779793] dracut: /dev/sda2: clean, 709555/13598720 files, 22370560/54372608 blocks [ 2.782690] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro [ 2.800518] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 2.806102] dracut: Mounted root filesystem /dev/sda2 [ 2.818708] device-mapper: uevent: version 1.0.3 [ 2.820964] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.847655] dracut: Switching root [ 2.878866] Switched to clocksource tsc [ 2.915006] init: ureadahead main process (2747) terminated with status 5 [ 3.017269] systemd-udevd[2857]: starting version 204 [ 3.105122] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 3.105127] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.105130] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.183441] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 3.183445] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.183448] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.193211] systemd-udevd[3503]: could not open moddep file '/lib/modules/3.14.0_kcloud_04fcbf_20140516+/modules.dep.bin' [ 3.245605] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.247754] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.278652] Adding 16440316k swap on /dev/sda3. Priority:-1 extents:1 across:16440316k SS [ 3.285103] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.288278] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.299358] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 3.374079] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.377387] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.438904] init: failsafe main process (3755) killed by TERM signal [ 3.456289] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory [ 3.463047] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.467175] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.630911] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 3.739703] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X [ 3.803355] init: avahi-cups-reload main process (3898) terminated with status 1 [ 3.840534] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X [ 3.900123] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 3.900127] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.900129] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.910607] init: lightdm main process (4041) terminated with status 1 [ 3.916560] init: plymouth-ready (started) main process (3544) terminated with status 1 [ 4.442272] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 4.442282] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 6.766053] e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 6.766058] e1000e 0000:00:19.0 eth3: 10/100 speed: disabling TSO [ 8.783811] init: failsafe-x main process (4258) terminated with status 127 [ 63.657796] usb 1-1: USB disconnect, device number 2 [ 65.175421] usb 1-1: new low-speed USB device number 4 using xhci_hcd [ 65.342607] usb 1-1: New USB device found, idVendor=046d, idProduct=c077 [ 65.342610] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 65.342612] usb 1-1: Product: USB Optical Mouse [ 65.342614] usb 1-1: Manufacturer: Logitech [ 65.342710] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 65.344561] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0003/input/input9 [ 65.344711] hid-generic 0003:046D:C077.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0 [ 80.736859] [drm:i915_gem_open] [ 80.736886] [drm:intel_crtc_cursor_set] cursor off [ 80.736890] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 80.736894] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 80.736897] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 80.736899] [drm:intel_crtc_cursor_set] cursor off [ 80.736901] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 80.736903] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 80.736905] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 80.736907] [drm:intel_crtc_cursor_set] cursor off [ 80.736908] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 80.736910] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 80.736912] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 80.736921] [drm:i915_gem_open] [ 80.737219] [drm:i915_gem_open] [ 80.737237] [drm:i915_gem_open] [ 116.708136] [drm:intel_crtc_cursor_set] cursor off [ 116.708143] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 116.708149] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 116.708153] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 116.708157] [drm:intel_crtc_cursor_set] cursor off [ 116.708159] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 116.708162] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 116.708166] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 116.708169] [drm:intel_crtc_cursor_set] cursor off [ 116.708171] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 116.708174] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 116.708177] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 125.323526] usb 1-1: USB disconnect, device number 4 [ 126.841229] usb 1-1: new low-speed USB device number 5 using xhci_hcd [ 127.008544] usb 1-1: New USB device found, idVendor=046d, idProduct=c077 [ 127.008547] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 127.008549] usb 1-1: Product: USB Optical Mouse [ 127.008551] usb 1-1: Manufacturer: Logitech [ 127.008637] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 127.010305] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0004/input/input10 [ 127.010435] hid-generic 0003:046D:C077.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0 [ 187.005259] usb 1-1: USB disconnect, device number 5 [ 188.522026] usb 1-1: new low-speed USB device number 6 using xhci_hcd [ 188.689279] usb 1-1: New USB device found, idVendor=046d, idProduct=c077 [ 188.689283] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 188.689285] usb 1-1: Product: USB Optical Mouse [ 188.689287] usb 1-1: Manufacturer: Logitech [ 188.689373] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 188.691157] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0005/input/input11 [ 188.691300] hid-generic 0003:046D:C077.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0