[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.0_kcloud_1d7da0_20140521+ (root@x-kcloud3) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #32 SMP Wed May 21 13:11:30 EDT 2014 [ 0.000000] Command line: BOOT_IMAGE=kernels//kcloud/1d7da0e3acb333320b2440d7ccc141a5c5116b0d/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/1d7da0e3acb333320b2440d7ccc141a5c5116b0d/modules_x86_64/lib/modules/3.14.0_kcloud_1d7da0_20140521+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0x00027f7e [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a7f0afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a7f0b000-0x00000000a7f28fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a7f29000-0x00000000aaf4dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aaf4e000-0x00000000ab5b5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ab5b6000-0x00000000ab7b5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00AD000000 mask 7FFF000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x031dd000, 0x031ddfff] PGTABLE [ 0.000000] BRK [0x031de000, 0x031defff] PGTABLE [ 0.000000] BRK [0x031df000, 0x031dffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff] [ 0.000000] [mem 0x14f600000-0x14f7fffff] page 2M [ 0.000000] BRK [0x031e0000, 0x031e0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff] [ 0.000000] [mem 0x14c000000-0x14f5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G [ 0.000000] [mem 0x140000000-0x14bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xa7f0afff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xa7dfffff] page 2M [ 0.000000] [mem 0xa7e00000-0xa7f0afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xa7f29000-0xaaf4dfff] [ 0.000000] [mem 0xa7f29000-0xa7ffffff] page 4k [ 0.000000] [mem 0xa8000000-0xaadfffff] page 2M [ 0.000000] [mem 0xaae00000-0xaaf4dfff] page 4k [ 0.000000] BRK [0x031e1000, 0x031e1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff] [ 0.000000] [mem 0xab7e2000-0xab7fefff] page 4k [ 0.000000] BRK [0x031e2000, 0x031e2fff] PGTABLE [ 0.000000] ACPI: RSDP 00000000ab7e1014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 00000000ab7c9188 000114 (v01 INTEL BDW-ULT 00000000 01000013) [ 0.000000] ACPI: FACP 00000000ab7d7000 0000F4 (v05 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: DSDT 00000000a7f0b000 01DFE9 (v02 INTEL BDW 00000000 INTL 20130927) [ 0.000000] ACPI: FACS 00000000ab799000 000040 [ 0.000000] ACPI: TCPA 00000000ab7df000 000032 (v02 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: UEFI 00000000ab79c000 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 00000000ab7de000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 00000000ab7dd000 00004E (v01 MeSsdt MeSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: TPM2 00000000ab7dc000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: SSDT 00000000ab7db000 0005B1 (v01 Intel PerfTune 00001000 INTL 20130927) [ 0.000000] ACPI: DBGP 00000000ab7da000 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 00000000ab7d9000 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: LPIT 00000000ab7d8000 000094 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: HPET 00000000ab7d6000 000038 (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: APIC 00000000ab7d5000 0000BC (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: MCFG 00000000ab7d4000 00003C (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: WDAT 00000000ab7d3000 000104 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 00000000ab7d2000 000250 (v01 INTEL sensrhub 00000000 INTL 20130927) [ 0.000000] ACPI: SSDT 00000000ab7cf000 002E26 (v01 INTEL PtidDevc 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 00000000ab7ce000 000C7D (v01 INTEL Ther_Rvp 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 00000000ab7cd000 00017F (v01 INTEL zpodd 00001000 INTL 20130927) [ 0.000000] ACPI: BOOT 00000000ab7cc000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000ab7cb000 00053B (v01 PmRef Cpu0Ist 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 00000000ab7ca000 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 00000000ab7c2000 006F06 (v01 SaSsdt SaSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 00000000ab7e0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927) [ 0.000000] ACPI: PCCT 00000000ab7c1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 00000000ab7c0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: CSRT 00000000ab7bf000 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: DMAR 00000000ab7be000 0000F0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: FPDT 00000000ab7bd000 000044 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: ASF! 00000000ab7bc000 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: BGRT 00000000ab7bb000 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff] [ 0.000000] NODE_DATA [mem 0x14f7fa000-0x14f7fdfff] [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x14f7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00057fff] [ 0.000000] node 0: [mem 0x00059000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xa7f0afff] [ 0.000000] node 0: [mem 0xa7f29000-0xaaf4dfff] [ 0.000000] node 0: [mem 0xab7e2000-0xab7fefff] [ 0.000000] node 0: [mem 0x100000000-0x14f7fffff] [ 0.000000] On node 0 totalpages: 1025770 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10878 pages used for memmap [ 0.000000] DMA32 zone: 696141 pages, LIFO batch:31 [ 0.000000] Normal zone: 5088 pages used for memmap [ 0.000000] Normal zone: 325632 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa7f0b000-0xa7f28fff] [ 0.000000] PM: Registered nosave memory: [mem 0xaaf4e000-0xab5b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab5b6000-0xab7b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014f400000 s74560 r8192 d23744 u262144 [ 0.000000] pcpu-alloc: s74560 r8192 d23744 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1009714 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//kcloud/1d7da0e3acb333320b2440d7ccc141a5c5116b0d/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/1d7da0e3acb333320b2440d7ccc141a5c5116b0d/modules_x86_64/lib/modules/3.14.0_kcloud_1d7da0_20140521+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0x00027f7e [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3935724K/4103080K available (7211K kernel code, 709K rwdata, 3552K rodata, 22556K init, 596K bss, 167356K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:1016 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1795.854 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.70 BogoMIPS (lpj=1795854) [ 0.000009] pid_max: default: 32768 minimum: 301 [ 0.000017] ACPI: Core revision 20131218 [ 0.021874] ACPI: All ACPI Tables successfully acquired [ 0.021905] Security Framework initialized [ 0.022201] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.023195] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.023641] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.023650] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.023880] CPU: Physical Processor ID: 0 [ 0.023883] CPU: Processor Core ID: 0 [ 0.025101] mce: CPU supports 7 MCE banks [ 0.025113] CPU0: Thermal LVT vector (0xfa) already installed [ 0.025122] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.025122] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.025122] tlb_flushall_shift: 6 [ 0.025585] Freeing SMP alternatives memory: 32K (ffffffff8313f000 - ffffffff83147000) [ 0.026260] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.036261] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04) [ 0.036272] TSC deadline timer enabled [ 0.036280] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.036289] ... version: 3 [ 0.036291] ... bit width: 48 [ 0.036293] ... generic registers: 4 [ 0.036295] ... value mask: 0000ffffffffffff [ 0.036298] ... max period: 0000ffffffffffff [ 0.036300] ... fixed-purpose events: 3 [ 0.036302] ... event mask: 000000070000000f [ 0.036535] x86: Booting SMP configuration: [ 0.036538] .... node #0, CPUs: #1 [ 0.048910] CPU1: Thermal LVT vector (0xfa) already installed [ 0.051026] #2<7>[ 0.063602] CPU2: Thermal LVT vector (0xfa) already installed [ 0.078096] #3 [ 0.078096] CPU3: Thermal LVT vector (0xfa) already installed [ 0.080166] x86: Booted up 1 node, 4 CPUs [ 0.080172] smpboot: Total of 4 processors activated (14366.83 BogoMIPS) [ 0.085350] devtmpfs: initialized [ 0.085736] PM: Registering ACPI NVS region [mem 0xab5b6000-0xab7b5fff] (2097152 bytes) [ 0.085928] xor: automatically using best checksumming function: [ 0.095089] avx : 17380.000 MB/sec [ 0.095119] RTC time: 17:12:54, date: 05/21/14 [ 0.095160] NET: Registered protocol family 16 [ 0.095578] cpuidle: using governor ladder [ 0.095581] cpuidle: using governor menu [ 0.095713] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.095718] ACPI: bus type PCI registered [ 0.095778] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.095783] PCI: not using MMCONFIG [ 0.095785] PCI: Using configuration type 1 for base access [ 0.106019] bio: create slab at 0 [ 0.123124] raid6: sse2x1 5335 MB/s [ 0.140149] raid6: sse2x2 6621 MB/s [ 0.157166] raid6: sse2x4 7941 MB/s [ 0.174187] raid6: avx2x1 10488 MB/s [ 0.191200] raid6: avx2x2 12320 MB/s [ 0.208224] raid6: avx2x4 14417 MB/s [ 0.208226] raid6: using algorithm avx2x4 (14417 MB/s) [ 0.208229] raid6: using avx2x2 recovery algorithm [ 0.208287] ACPI: Added _OSI(Module Device) [ 0.208290] ACPI: Added _OSI(Processor Device) [ 0.208292] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.208295] ACPI: Added _OSI(Processor Aggregator Device) [ 0.220452] ACPI: Executed 18 blocks of module-level executable AML code [ 0.253441] ACPI: SSDT 00000000ab57ca18 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.254382] ACPI: Dynamic OEM Table Load: [ 0.254386] ACPI: SSDT (null) 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.259603] ACPI: SSDT 00000000ab57d818 000792 (v01 PmRef ApIst 00003000 INTL 20130927) [ 0.260615] ACPI: Dynamic OEM Table Load: [ 0.260618] ACPI: SSDT (null) 000792 (v01 PmRef ApIst 00003000 INTL 20130927) [ 0.264445] ACPI: SSDT 00000000ab57bd98 000119 (v01 PmRef ApCst 00003000 INTL 20130927) [ 0.265381] ACPI: Dynamic OEM Table Load: [ 0.265384] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20130927) [ 0.272722] ACPI: Interpreter enabled [ 0.272732] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.272741] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.272766] ACPI: (supports S0 S3 S4 S5) [ 0.272769] ACPI: Using IOAPIC for interrupt routing [ 0.272794] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.275157] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.285881] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.286626] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.287355] ACPI: Power Resource [PG00] (on) [ 0.290761] ACPI: Power Resource [PG01] (on) [ 0.296763] ACPI: Power Resource [PG02] (on) [ 0.359466] ACPI: Power Resource [FN00] (off) [ 0.359604] ACPI: Power Resource [FN01] (off) [ 0.359735] ACPI: Power Resource [FN02] (off) [ 0.359863] ACPI: Power Resource [FN03] (off) [ 0.359993] ACPI: Power Resource [FN04] (off) [ 0.361352] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.361361] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.361916] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.362534] PCI host bridge to bus 0000:00 [ 0.362539] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.362543] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.362546] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.362549] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.362557] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff] [ 0.362568] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.362849] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.362864] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit] [ 0.362873] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.362880] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.363149] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.363158] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit] [ 0.363450] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.363469] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit] [ 0.363532] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.363742] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.363810] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.363830] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit] [ 0.363895] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.364158] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.364177] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff] [ 0.364185] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff] [ 0.364194] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.364256] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.364460] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.364532] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.364902] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.364918] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.364926] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.364934] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.364942] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.364950] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.364958] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff] [ 0.364997] pci 0000:00:1f.2: PME# supported from D3hot [ 0.365245] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.365261] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit] [ 0.365282] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.365550] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.365586] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit] [ 0.365913] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.372789] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.372865] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.372922] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.372976] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.373029] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 0.373082] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.373136] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.373190] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.373493] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.373718] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.373890] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.373895] vgaarb: loaded [ 0.373897] vgaarb: bridge control possible 0000:00:02.0 [ 0.374033] SCSI subsystem initialized [ 0.374139] libata version 3.00 loaded. [ 0.374268] ACPI: bus type USB registered [ 0.374332] usbcore: registered new interface driver usbfs [ 0.374365] usbcore: registered new interface driver hub [ 0.374409] usbcore: registered new device driver usb [ 0.374508] pps_core: LinuxPPS API ver. 1 registered [ 0.374511] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.374537] PTP clock support registered [ 0.374669] PCI: Using ACPI for IRQ routing [ 0.380804] PCI: pci_cache_line_size set to 64 bytes [ 0.380830] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.380832] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.380834] e820: reserve RAM buffer [mem 0xa7f0b000-0xa7ffffff] [ 0.380836] e820: reserve RAM buffer [mem 0xaaf4e000-0xabffffff] [ 0.380838] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff] [ 0.380839] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff] [ 0.381023] NetLabel: Initializing [ 0.381026] NetLabel: domain hash size = 128 [ 0.381028] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.381043] NetLabel: unlabeled traffic allowed by default [ 0.381185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.381193] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.383221] Switched to clocksource hpet [ 0.383300] pnp: PnP ACPI init [ 0.383310] ACPI: bus type PNP registered [ 0.383640] system 00:00: [io 0x06a4] has been reserved [ 0.383644] system 00:00: [io 0x06a0] has been reserved [ 0.383649] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.383751] pnp 00:01: [dma 4] [ 0.383801] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.383859] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.384003] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.384096] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.384100] system 00:04: [io 0xffff] has been reserved [ 0.384104] system 00:04: [io 0xffff] has been reserved [ 0.384107] system 00:04: [io 0xffff] has been reserved [ 0.384110] system 00:04: [io 0x1800-0x18fe] could not be reserved [ 0.384114] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.384118] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.384198] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.384295] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.384300] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.384457] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.384609] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.385287] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.385292] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.385297] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.385301] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.385304] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.385308] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved [ 0.385311] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.385315] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.385461] pnp 00:0a: Plug and Play ACPI device, IDs INT3437 (active) [ 0.400331] pnp 00:0b: Plug and Play ACPI device, IDs INT3432 (active) [ 0.405329] pnp 00:0c: Plug and Play ACPI device, IDs INT3433 (active) [ 0.406057] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.406062] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.406066] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.406069] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.406073] system 00:0d: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.406077] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.406080] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.406084] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.406087] system 00:0d: [mem 0xff000000-0xffffffff] could not be reserved [ 0.406091] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.406094] system 00:0d: [mem 0xaf810000-0xaf81ffff] has been reserved [ 0.406098] system 00:0d: [mem 0xaf800000-0xaf80ffff] has been reserved [ 0.406102] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.406436] system 00:0e: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.406441] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.406586] pnp: PnP ACPI: found 15 devices [ 0.406589] ACPI: bus type PNP unregistered [ 0.415572] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.415575] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.415577] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.415579] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xfeafffff] [ 0.415608] NET: Registered protocol family 2 [ 0.415764] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.415853] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.415929] TCP: Hash tables configured (established 32768 bind 32768) [ 0.415953] TCP: reno registered [ 0.415962] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.415981] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.416039] NET: Registered protocol family 1 [ 0.416112] RPC: Registered named UNIX socket transport module. [ 0.416115] RPC: Registered udp transport module. [ 0.416117] RPC: Registered tcp transport module. [ 0.416120] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.416128] pci 0000:00:02.0: Boot video device [ 0.416224] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.416228] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11 [ 0.416325] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.416343] PCI: CLS 0 bytes, default 64 [ 0.929700] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.929708] software IO TLB [mem 0xa3f0b000-0xa7f0b000] (64MB) mapped at [ffff8800a3f0b000-ffff8800a7f0afff] [ 0.929857] Simple Boot Flag at 0x47 set to 0x1 [ 0.931302] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.931358] audit: initializing netlink subsys (disabled) [ 0.931370] audit: type=2000 audit(1400692374.894:1): initialized [ 0.962675] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.966174] VFS: Disk quotas dquot_6.5.2 [ 0.966256] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.967719] NFS: Registering the id_resolver key type [ 0.967729] Key type id_resolver registered [ 0.967732] Key type id_legacy registered [ 0.967736] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.968006] fuse init (API version 7.22) [ 0.968212] msgmni has been set to 7687 [ 0.968557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.968562] io scheduler noop registered [ 0.968564] io scheduler deadline registered [ 0.968626] io scheduler cfq registered (default) [ 0.968824] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.968947] efifb: probing for efifb [ 0.969370] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010880000, using 8100k, total 8100k [ 0.969374] efifb: mode is 1920x1080x32, linelength=7680, pages=2032 [ 0.969376] efifb: scrolling: redraw [ 0.969379] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.976229] Console: switching to colour frame buffer device 240x67 [ 0.982539] fb0: EFI VGA frame buffer device [ 0.982721] ACPI: Fan [FAN0] (off) [ 0.982800] ACPI: Fan [FAN1] (off) [ 0.982877] ACPI: Fan [FAN2] (off) [ 0.982954] ACPI: Fan [FAN3] (off) [ 0.983040] ACPI: Fan [FAN4] (off) [ 0.983467] Monitor-Mwait will be used to enter C-1 state [ 0.985490] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.985524] ACPI: Thermal Zone [TZ00] (46 C) [ 0.986323] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.986356] ACPI: Thermal Zone [TZ01] (46 C) [ 0.986482] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.007178] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.008048] Non-volatile memory driver v1.3 [ 1.008074] Linux agpgart interface v0.103 [ 1.010500] brd: module loaded [ 1.010855] Loading iSCSI transport class v2.0-870. [ 1.011473] iscsi: registered transport (tcp) [ 1.011652] Adaptec aacraid driver 1.2-0[30200]-ms [ 1.011722] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 1.011937] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k. [ 1.012075] iscsi: registered transport (qla4xxx) [ 1.012145] QLogic iSCSI HBA Driver [ 1.012244] DC390: clustering now enabled by default. If you get problems load [ 1.012283] with "disable_clustering=1" and report to maintainers [ 1.012402] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 1.012551] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 1.012621] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 1.012741] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1.012851] osst :I: Tape driver with OnStream support version 0.99.4 [ 1.012851] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 1.013151] SCSI Media Changer driver v0.25 [ 1.013256] ahci 0000:00:1f.2: version 3.0 [ 1.013381] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X [ 1.024029] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode [ 1.024075] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.024902] scsi0 : ahci [ 1.025083] scsi1 : ahci [ 1.025243] scsi2 : ahci [ 1.025405] scsi3 : ahci [ 1.026867] ata1: DUMMY [ 1.028214] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56 [ 1.029591] ata3: DUMMY [ 1.030934] ata4: DUMMY [ 1.034657] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 1.036052] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11) [ 1.037549] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.038965] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.040419] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.041831] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.043300] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.044718] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.046280] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.047728] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X [ 1.209250] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.210685] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4 [ 1.212137] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.213617] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.215114] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 1.216575] igb: Copyright (c) 2007-2013 Intel Corporation. [ 1.218120] usbcore: registered new interface driver zd1201 [ 1.219606] usbcore: registered new interface driver catc [ 1.221068] usbcore: registered new interface driver kaweth [ 1.222473] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.223942] usbcore: registered new interface driver pegasus [ 1.225404] usbcore: registered new interface driver rtl8150 [ 1.226848] usbcore: registered new interface driver asix [ 1.228285] usbcore: registered new interface driver ax88179_178a [ 1.229723] usbcore: registered new interface driver cdc_ether [ 1.231171] usbcore: registered new interface driver dm9601 [ 1.232615] usbcore: registered new interface driver gl620a [ 1.234066] usbcore: registered new interface driver net1080 [ 1.235499] usbcore: registered new interface driver plusb [ 1.236922] usbcore: registered new interface driver rndis_host [ 1.238323] usbcore: registered new interface driver cdc_subset [ 1.239705] usbcore: registered new interface driver zaurus [ 1.241079] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.242443] usbcore: registered new interface driver cdc_ncm [ 1.243940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.245250] ehci-pci: EHCI PCI platform driver [ 1.246634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.247962] ohci-pci: OHCI PCI platform driver [ 1.249323] uhci_hcd: USB Universal Host Controller Interface driver [ 1.250789] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 1.252126] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11 [ 1.253466] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.254830] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.256231] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.256249] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X [ 1.256306] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.257617] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.258920] usb usb1: Product: xHCI Host Controller [ 1.260206] usb usb1: Manufacturer: Linux 3.14.0_kcloud_1d7da0_20140521+ xhci_hcd [ 1.261511] usb usb1: SerialNumber: 0000:00:14.0 [ 1.262991] hub 1-0:1.0: USB hub found [ 1.264292] hub 1-0:1.0: 11 ports detected [ 1.269063] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.270414] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.271726] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.273006] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.274274] usb usb2: Product: xHCI Host Controller [ 1.275518] usb usb2: Manufacturer: Linux 3.14.0_kcloud_1d7da0_20140521+ xhci_hcd [ 1.276800] usb usb2: SerialNumber: 0000:00:14.0 [ 1.278279] hub 2-0:1.0: USB hub found [ 1.279591] hub 2-0:1.0: 4 ports detected [ 1.282382] usbcore: registered new interface driver usb-storage [ 1.283804] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.285125] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.286932] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.288422] mousedev: PS/2 mouse device common for all mice [ 1.289908] rtc_cmos 00:05: RTC can wake from S4 [ 1.291388] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.292723] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.294082] i2c /dev entries driver [ 1.295503] hidraw: raw HID events driver (C) Jiri Kosina [ 1.297588] usbcore: registered new interface driver usbhid [ 1.298897] usbhid: USB HID core driver [ 1.300318] TCP: cubic registered [ 1.301590] Initializing XFRM netlink socket [ 1.302870] NET: Registered protocol family 17 [ 1.304164] Key type dns_resolver registered [ 1.306064] registered taskstats version 1 [ 1.307718] bio: create slab at 1 [ 1.309302] Btrfs loaded [ 1.310780] Magic number: 14:542:239 [ 1.312050] fan PNP0C0B:04: hash matches [ 1.313383] PM: Hibernation image not present or could not be loaded. [ 1.313401] Warning: unable to open an initial console. [ 1.329870] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.336916] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.338461] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133 [ 1.339764] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.341372] ata2.00: configured for UDMA/133 [ 1.342808] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BB24 D201 PQ: 0 ANSI: 5 [ 1.344400] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.344512] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.347206] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.348641] sd 1:0:0:0: [sda] Write Protect is off [ 1.350042] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.350053] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.353081] sda: sda1 sda2 sda3 [ 1.354967] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.360752] Freeing unused kernel memory: 22556K (ffffffff81b38000 - ffffffff8313f000) [ 1.400007] dracut: dracut-018-35.git20120510.fc17 [ 1.431654] udevd[1414]: starting version 182 [ 1.449290] [drm] Initialized drm 1.1.0 20060810 [ 1.453187] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.455328] ACPI: Lid Switch [LID0] [ 1.457172] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 1.462175] ACPI: Power Button [PWRB] [ 1.462799] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 1.463159] ACPI: Sleep Button [SLPB] [ 1.463645] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.464032] ACPI: Power Button [PWRF] [ 1.468428] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi, [ 1.468428] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH [ 1.469305] [drm] Memory usable by graphics device = 4096M [ 1.469307] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.469308] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.469311] checking generic (b0000000 7e9000) vs hw (b0000000 10000000) [ 1.469312] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver [ 1.481840] Console: switching to colour dummy device 80x25 [ 1.496235] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab77b018 [ 1.496244] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.496246] [drm:intel_opregion_setup] SWSCI supported [ 1.501849] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 1.501851] [drm:intel_opregion_setup] ASLE supported [ 1.501891] i915 0000:00:02.0: irq 59 for MSI/MSI-X [ 1.501901] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.501904] [drm] Driver supports precise vblank timestamp query. [ 1.501908] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.501911] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 1.501914] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.501915] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.501918] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 1.501920] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.501924] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa [ 1.501926] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c [ 1.501928] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.501931] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.501934] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.501935] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.501937] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.501939] [drm:parse_mipi] No MIPI config BDB found [ 1.501942] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.501944] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.501946] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.501948] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 1.501950] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.501951] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 1.502015] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.502021] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000 [ 1.502024] [drm:intel_display_power_get] enabling always-on [ 1.502025] [drm:intel_display_power_get] enabling display [ 1.502029] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.502088] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.502089] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 1.502091] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 1.502093] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 1.502095] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.502097] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.502098] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 1.502100] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 1.502102] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 1.502103] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.502105] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.502107] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 1.502108] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 1.502110] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 1.502112] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.502114] [drm:intel_modeset_init] 3 display pipes available. [ 1.502131] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz [ 1.502436] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.502545] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 1.502547] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.502549] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.502551] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.502552] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.502686] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 1.502693] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.502965] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00 [ 1.503135] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.524711] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.524713] [drm] VBT doesn't support DRRS [ 1.524784] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered [ 1.524795] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.524895] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.530843] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled [ 1.530847] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 1.530849] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled [ 1.530852] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000 [ 1.530857] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A [ 1.530859] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A [ 1.530862] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A [ 1.530865] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled [ 1.530867] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-1] hw state readout: disabled [ 1.530869] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:HDMI-A-1] hw state readout: disabled [ 1.530871] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled [ 1.530874] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A [ 1.530876] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.530877] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.530880] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.530882] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.530884] [drm:intel_dump_pipe_config] requested mode: [ 1.530887] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 1.530888] [drm:intel_dump_pipe_config] adjusted mode: [ 1.530891] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.530894] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 1.530895] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.530897] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.530899] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.530901] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.530903] [drm:intel_dump_pipe_config] ips: 0 [ 1.530904] [drm:intel_dump_pipe_config] double wide: 0 [ 1.530906] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B [ 1.530908] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.530909] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.530911] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.530913] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.530915] [drm:intel_dump_pipe_config] requested mode: [ 1.530917] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.530919] [drm:intel_dump_pipe_config] adjusted mode: [ 1.530921] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.530923] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.530925] [drm:intel_dump_pipe_config] port clock: 0 [ 1.530926] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.530928] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.530930] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.530931] [drm:intel_dump_pipe_config] ips: 0 [ 1.530933] [drm:intel_dump_pipe_config] double wide: 0 [ 1.530935] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C [ 1.530936] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.530938] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.530940] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.530942] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.530943] [drm:intel_dump_pipe_config] requested mode: [ 1.530946] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.530947] [drm:intel_dump_pipe_config] adjusted mode: [ 1.530949] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.530952] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.530953] [drm:intel_dump_pipe_config] port clock: 0 [ 1.530954] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.530956] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.530958] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.530959] [drm:intel_dump_pipe_config] ips: 0 [ 1.530961] [drm:intel_dump_pipe_config] double wide: 0 [ 1.530967] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 1.530970] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 1.530973] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 1.530975] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 1.530976] [drm:check_crtc_state] [CRTC:5] [ 1.530983] [drm:check_crtc_state] [CRTC:8] [ 1.530986] [drm:check_crtc_state] [CRTC:11] [ 1.530991] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.530994] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.530996] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.531000] [drm:intel_alloc_plane_obj] plane fb obj ffff8800aa9be600 [ 1.531003] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.531005] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.534233] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 1.534236] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 1.534238] [drm:i915_gem_context_init] HW context support initialized [ 1.534255] [drm:init_status_page] render ring hws offset: 0x007fb000 [ 1.534336] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000 [ 1.534342] [drm:init_status_page] bsd ring hws offset: 0x0081d000 [ 1.534408] [drm:init_status_page] blitter ring hws offset: 0x0083e000 [ 1.534466] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000 [ 1.534657] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] [ 1.534660] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 1.534669] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.534673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes : [ 1.534676] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.534679] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 1.534681] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] [ 1.534683] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 1.534687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] disconnected [ 1.534689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] [ 1.534691] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 1.534846] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.534848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.534850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected [ 1.534852] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] [ 1.534854] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2] [ 1.535012] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.535013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.535015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected [ 1.535017] [drm:drm_setup_crtcs] [ 1.535019] [drm:drm_enable_connectors] connector 14 enabled? yes [ 1.535020] [drm:drm_enable_connectors] connector 23 enabled? no [ 1.535022] [drm:drm_enable_connectors] connector 24 enabled? no [ 1.535023] [drm:drm_enable_connectors] connector 26 enabled? no [ 1.535026] [drm:intel_fb_initial_config] looking for cmdline mode on connector 14 [ 1.535027] [drm:intel_fb_initial_config] looking for preferred mode on connector 14 [ 1.535029] [drm:intel_fb_initial_config] connector eDP-1 on crtc 5: 1920x1080 [ 1.535031] [drm:intel_fb_initial_config] connector 23 not enabled, skipping [ 1.535033] [drm:intel_fb_initial_config] connector 24 not enabled, skipping [ 1.535034] [drm:intel_fb_initial_config] connector 26 not enabled, skipping [ 1.535036] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5 [ 1.535038] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.535040] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 1.535043] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400 [ 1.536373] [drm:intelfb_create] allocated 1920x1080 fb: 0x00880000, bo ffff8800aa9bf680 [ 1.536489] fbcon: inteldrmfb (fb0) is primary device [ 1.536560] [drm:intel_crtc_cursor_set] cursor off [ 1.536563] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 1.536565] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.536568] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.536572] [drm:drm_mode_debug_printmodeline] Modeline 28:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.536574] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 1.536576] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 1.536579] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.536582] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains [ 1.536585] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 1.536591] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.536593] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 1.536596] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.536598] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 1.536599] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.536600] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.536602] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.536604] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.536605] [drm:intel_dump_pipe_config] requested mode: [ 1.536608] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.536609] [drm:intel_dump_pipe_config] adjusted mode: [ 1.536612] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.536615] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 1.536616] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.536617] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.536619] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.536620] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.536621] [drm:intel_dump_pipe_config] ips: 1 [ 1.536621] [drm:intel_dump_pipe_config] double wide: 0 [ 1.551828] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.551834] [drm:intel_edp_backlight_off] [ 1.567978] [drm:intel_edp_panel_off] Turn eDP power off [ 1.621820] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 1.752757] [drm:wait_panel_off] Wait for panel power off time [ 1.752760] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1.789084] usb 1-1: New USB device found, idVendor=046d, idProduct=c077 [ 1.789086] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.789087] usb 1-1: Product: USB Optical Mouse [ 1.789089] usb 1-1: Manufacturer: Logitech [ 1.789208] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.791071] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0001/input/input5 [ 1.791262] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0 [ 1.807736] [drm:wait_panel_status] Wait complete [ 1.807740] [drm:intel_update_fbc] no output, disabling [ 1.807745] [drm:intel_display_power_put] disabling display [ 1.807746] [drm:hsw_set_power_well] Requesting to disable the power well [ 1.807758] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680 [ 1.807762] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080] [ 1.807763] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A [ 1.807766] [drm:intel_edp_panel_on] Turn eDP power on [ 1.807768] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.930695] tsc: Refined TSC clocksource calibration: 1795.845 MHz [ 1.943700] usb 1-5: new low-speed USB device number 3 using xhci_hcd [ 2.112561] usb 1-5: New USB device found, idVendor=413c, idProduct=2107 [ 2.112564] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.112565] usb 1-5: Product: Dell USB Entry Keyboard [ 2.112566] usb 1-5: Manufacturer: DELL [ 2.112687] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.115850] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:413C:2107.0002/input/input6 [ 2.115984] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-5/input0 [ 2.353546] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 2.397522] [drm:wait_panel_status] Wait complete [ 2.397525] [drm:wait_panel_on] Wait for panel power on [ 2.397528] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 2.606446] [drm:wait_panel_status] Wait complete [ 2.606449] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 2.606455] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 2.607534] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.607990] [drm:intel_dp_start_link_train] clock recovery OK [ 2.608748] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 2.608952] [drm:intel_edp_backlight_on] [ 2.608956] [drm:intel_panel_enable_backlight] pipe A [ 2.608960] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 2.608963] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 2.628438] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 2.628441] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 2.628445] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 2.628446] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 2.628448] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 2.628449] [drm:check_crtc_state] [CRTC:5] [ 2.628456] [drm:check_crtc_state] [CRTC:8] [ 2.628457] [drm:check_crtc_state] [CRTC:11] [ 2.628459] [drm:intel_crtc_cursor_set] cursor off [ 2.628460] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.628462] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.628463] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.628464] [drm:intel_crtc_cursor_set] cursor off [ 2.628465] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.628466] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.628468] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.628472] Console: switching to colour frame buffer device 240x67 [ 2.628478] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.628480] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.628481] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.635978] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.636012] i915 0000:00:02.0: registered panic notifier [ 2.642908] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.643568] acpi device:17: registered as cooling_device9 [ 2.643740] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 2.644083] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.648487] dracut: Starting plymouth daemon [ 2.656699] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.656702] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.656704] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.666789] [drm:i915_gem_open] [ 2.666815] [drm:intel_crtc_cursor_set] cursor off [ 2.666818] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.666822] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.666825] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.666827] [drm:intel_crtc_cursor_set] cursor off [ 2.666829] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.666831] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.666833] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.666834] [drm:intel_crtc_cursor_set] cursor off [ 2.666836] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.666838] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.666840] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.666850] [drm:i915_gem_open] [ 2.666859] [drm:intel_crtc_cursor_set] cursor off [ 2.666861] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.666863] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.666865] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.666867] [drm:intel_crtc_cursor_set] cursor off [ 2.666868] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.666870] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.666872] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.666873] [drm:intel_crtc_cursor_set] cursor off [ 2.666875] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.666877] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.666879] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.666885] [drm:i915_gem_open] [ 2.667132] [drm:intel_crtc_cursor_set] cursor off [ 2.667136] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.667140] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.667143] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.667145] [drm:intel_crtc_cursor_set] cursor off [ 2.667147] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.667150] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.667153] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.667156] [drm:intel_crtc_cursor_set] cursor off [ 2.667158] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.667161] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.667164] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.667357] dracut: error: unexpectedly disconnected from boot status daemon [ 2.673424] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.673427] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.673429] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.740888] ACPI: AC Adapter [ADP1] (on-line) [ 2.759990] ppdev: user-space parallel port driver [ 2.763378] ACPI: Battery Slot [BAT0] (battery present) [ 2.763469] ACPI: Battery Slot [BAT1] (battery absent) [ 2.763578] ACPI: Battery Slot [BAT2] (battery absent) [ 2.781494] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258) [ 2.781666] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.781773] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258) [ 2.781938] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258) [ 2.782102] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.782205] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258) [ 2.782396] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258) [ 2.782561] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\_PR_.IO_D) (20131218/utaddress-258) [ 2.782729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.782832] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.786474] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.787148] iTCO_vendor_support: vendor-support=0 [ 2.787344] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 2.787381] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 2.787789] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.801400] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module [ 2.801405] [drm:intel_display_power_get] enabling display [ 2.801410] [drm:hsw_set_power_well] Enabling power well [ 2.801450] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X [ 2.801510] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 2.803871] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258) [ 2.806147] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.810103] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 2.834842] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 2.834846] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.834848] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.848618] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.850901] EXT4-fs (sda2): write access will be enabled during recovery [ 2.869571] EXT4-fs (sda2): recovery complete [ 2.872046] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.897338] dracut: Checking ext4: /dev/sda2 [ 2.899741] dracut: issuing e2fsck -a /dev/sda2 [ 2.911007] dracut: /dev/sda2: clean, 690687/13598720 files, 22867332/54372608 blocks [ 2.913683] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro [ 2.926188] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 2.930359] Switched to clocksource tsc [ 2.932507] dracut: Mounted root filesystem /dev/sda2 [ 2.944754] device-mapper: uevent: version 1.0.3 [ 2.947197] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.968964] dracut: Switching root [ 3.002676] random: init urandom read with 85 bits of entropy available [ 3.038404] init: ureadahead main process (2704) terminated with status 5 [ 3.137004] systemd-udevd[2814]: starting version 204 [ 3.196064] random: nonblocking pool is initialized [ 3.282292] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 3.282297] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.282300] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.301001] systemd-udevd[3407]: could not open moddep file '/lib/modules/3.14.0_kcloud_1d7da0_20140521+/modules.dep.bin' [ 3.303357] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.307965] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.317672] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 3.317676] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.317679] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.329299] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 3.329303] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.329305] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.370705] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 3.370710] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.370713] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.384618] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.385882] Adding 16440316k swap on /dev/sda3. Priority:-1 extents:1 across:16440316k SS [ 3.386861] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.425991] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 3.509290] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.512548] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.572817] init: failsafe main process (3714) killed by TERM signal [ 3.587616] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory [ 3.596044] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.601893] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.733253] init: avahi-cups-reload main process (3843) terminated with status 1 [ 3.797582] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 3.948138] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X [ 4.048961] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X [ 4.128522] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 4.128527] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 4.128530] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 4.138854] init: lightdm main process (3986) terminated with status 1 [ 4.145130] init: plymouth-ready (started) main process (3545) terminated with status 1 [ 4.505766] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 4.505776] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 5.571971] e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 5.571975] e1000e 0000:00:19.0 eth3: 10/100 speed: disabling TSO [ 8.932390] init: failsafe-x main process (4209) terminated with status 127 [ 32.730355] [drm:i915_gem_open] [ 32.730381] [drm:intel_crtc_cursor_set] cursor off [ 32.730385] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 32.730389] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 32.730392] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 32.730394] [drm:intel_crtc_cursor_set] cursor off [ 32.730396] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 32.730398] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 32.730400] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 32.730402] [drm:intel_crtc_cursor_set] cursor off [ 32.730403] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 32.730405] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 32.730407] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 32.730416] [drm:i915_gem_open] [ 32.730713] [drm:i915_gem_open] [ 32.730732] [drm:i915_gem_open] [ 32.730787] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[3] [ 32.730799] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[3] [ 32.730811] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 32.730815] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] [ 32.730820] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 32.730833] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 32.730840] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes : [ 32.730846] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 32.730851] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 32.730856] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 32.730898] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 32.730901] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] [ 32.730905] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 32.730910] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] disconnected [ 32.730913] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 32.730916] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] [ 32.730919] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 32.730924] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] disconnected [ 32.730941] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 32.730943] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] [ 32.730945] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 32.731104] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 32.731106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 32.731108] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected [ 32.731110] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 32.731112] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] [ 32.731114] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 32.731267] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 32.731269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 32.731271] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected [ 32.731286] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 32.731288] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] [ 32.731290] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2] [ 32.731448] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 32.731449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 32.731451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected [ 32.731453] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 32.731455] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] [ 32.731456] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2] [ 32.731615] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 32.731623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 32.731631] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected [ 32.733804] [drm:drm_mode_setcrtc] [CRTC:5] [ 32.733808] [drm:intel_crtc_set_config] [CRTC:5] [NOFB] [ 32.733812] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0 [ 32.733814] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [NOCRTC] [ 32.733816] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 32.733818] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 32.733820] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 32.733823] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [ 32.765590] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 32.765597] [drm:intel_edp_backlight_off] [ 32.781590] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 32.781597] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 32.781750] [drm:intel_edp_panel_off] Turn eDP power off [ 32.966521] [drm:wait_panel_off] Wait for panel power off time [ 32.966526] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 33.021499] [drm:wait_panel_status] Wait complete [ 33.021505] [drm:intel_update_fbc] no output, disabling [ 33.021511] [drm:intel_display_power_put] disabling always-on [ 33.021516] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 33.021518] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 33.021520] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 33.021522] [drm:check_crtc_state] [CRTC:5] [ 33.021525] [drm:check_crtc_state] [CRTC:8] [ 33.021527] [drm:check_crtc_state] [CRTC:11] [ 33.021532] [drm:drm_mode_setcrtc] [CRTC:8] [ 33.021534] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 33.021536] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 33.021539] [drm:drm_mode_setcrtc] [CRTC:11] [ 33.021541] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 33.021543] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 33.744291] [drm:intel_display_power_put] disabling display [ 33.744296] [drm:hsw_set_power_well] Requesting to disable the power well [ 33.744319] ------------[ cut here ]------------ [ 33.744334] WARNING: CPU: 0 PID: 4 at drivers/gpu/drm/i915/i915_drv.c:974 intel_runtime_suspend+0x3d/0x148 [i915]() [ 33.744336] Modules linked in: dm_mod snd_hda_codec_hdmi pcspkr i2c_i801 iTCO_wdt iTCO_vendor_support snd_hda_intel lpc_ich snd_hda_codec mfd_core snd_hwdep snd_pcm snd_timer snd soundcore battery ppdev parport_pc parport ac acpi_cpufreq i915 video button drm_kms_helper drm [ 33.744353] CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.14.0_kcloud_1d7da0_20140521+ #32 [ 33.744358] Workqueue: pm pm_runtime_work [ 33.744359] 0000000000000006 ffffffff816fd068 0000000000000000 ffffffff81033e44 [ 33.744362] ffffffffa0060507 ffff880145538000 ffff8800aaa9b000 ffff88014a333dd8 [ 33.744365] 0000000000000000 ffffffffa0060507 ffff880149839898 ffffffffa00c7230 [ 33.744368] Call Trace: [ 33.744373] [] ? dump_stack+0x41/0x51 [ 33.744377] [] ? warn_slowpath_common+0x6f/0x84 [ 33.744387] [] ? intel_runtime_suspend+0x3d/0x148 [i915] [ 33.744397] [] ? intel_runtime_suspend+0x3d/0x148 [i915] [ 33.744401] [] ? pci_pm_runtime_suspend+0x57/0x109 [ 33.744405] [] ? __rpm_callback+0x27/0x4a [ 33.744409] [] ? rpm_callback+0x4b/0x6b [ 33.744412] [] ? rpm_suspend+0x2aa/0x3f1 [ 33.744416] [] ? e1000_watchdog_task+0x747/0x756 [ 33.744418] [] ? pm_runtime_work+0x6d/0x77 [ 33.744422] [] ? process_one_work+0x1c1/0x2ca [ 33.744425] [] ? worker_thread+0x1c9/0x2ad [ 33.744428] [] ? rescuer_thread+0x259/0x259 [ 33.744432] [] ? kthread+0xca/0xd2 [ 33.744435] [] ? kthread_create_on_node+0x15d/0x15d [ 33.744439] [] ? ret_from_fork+0x7c/0xb0 [ 33.744442] [] ? kthread_create_on_node+0x15d/0x15d [ 33.744444] ---[ end trace 576d21341dcef210 ]--- [ 33.744454] pci_pm_runtime_suspend(): intel_runtime_suspend+0x0/0x148 [i915] returns -19 [ 33.822034] [drm:intel_crtc_cursor_set] cursor off [ 33.822036] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 33.822037] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 33.822039] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0 [ 33.822040] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 33.822042] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 33.822042] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 33.822043] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 33.822045] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 33.822047] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains [ 33.822050] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 33.822055] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 33.822056] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 33.822058] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 33.822060] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 33.822060] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 33.822061] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 33.822063] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 33.822064] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 33.822065] [drm:intel_dump_pipe_config] requested mode: [ 33.822068] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 33.822068] [drm:intel_dump_pipe_config] adjusted mode: [ 33.822070] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 33.822072] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 33.822073] [drm:intel_dump_pipe_config] port clock: 270000 [ 33.822074] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 33.822075] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 33.822077] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 33.822077] [drm:intel_dump_pipe_config] ips: 1 [ 33.822078] [drm:intel_dump_pipe_config] double wide: 0 [ 33.822081] [drm:intel_display_power_get] enabling always-on [ 33.822093] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680 [ 33.822096] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080] [ 33.822098] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A [ 33.822099] [drm:intel_edp_panel_on] Turn eDP power on [ 33.822102] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 33.822105] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 33.822107] [drm:wait_panel_status] Wait complete [ 33.822110] [drm:wait_panel_on] Wait for panel power on [ 33.822113] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 34.030135] [drm:wait_panel_status] Wait complete [ 34.030138] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 34.030144] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 34.031205] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 34.031652] [drm:intel_dp_start_link_train] clock recovery OK [ 34.032399] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 34.032598] [drm:intel_edp_backlight_on] [ 34.032602] [drm:intel_panel_enable_backlight] pipe A [ 34.032607] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 34.032609] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 34.052125] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 34.052129] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 34.052132] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 34.052133] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 34.052135] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 34.052136] [drm:check_crtc_state] [CRTC:5] [ 34.052142] [drm:check_crtc_state] [CRTC:8] [ 34.052143] [drm:check_crtc_state] [CRTC:11] [ 34.052146] [drm:intel_crtc_cursor_set] cursor off [ 34.052147] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 34.052148] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 34.052150] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 34.052151] [drm:intel_crtc_cursor_set] cursor off [ 34.052152] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 34.052153] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 34.052154] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 34.052157] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 34.052159] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 34.052160] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 34.052169] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 34.052170] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 34.052171] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 34.059268] [drm:intel_crtc_cursor_set] cursor off [ 34.059273] [drm:intel_crtc_set_config] [CRTC:5] [FB:29] #connectors=1 (x y) (0 0) [ 34.059275] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 34.059278] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 34.059280] [drm:intel_crtc_cursor_set] cursor off [ 34.059282] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 34.059284] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 34.059286] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 34.059287] [drm:intel_crtc_cursor_set] cursor off [ 34.059289] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 34.059291] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 34.059293] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 35.782506] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 35.782513] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 61.770011] usb 1-1: USB disconnect, device number 2 [ 63.289615] usb 1-1: new low-speed USB device number 4 using xhci_hcd [ 63.456909] usb 1-1: New USB device found, idVendor=046d, idProduct=c077 [ 63.456913] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 63.456915] usb 1-1: Product: USB Optical Mouse [ 63.456917] usb 1-1: Manufacturer: Logitech [ 63.457044] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 63.458920] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0003/input/input9 [ 63.459126] hid-generic 0003:046D:C077.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0