Attachment 14711 Details for Bug 14687 – lspci -vxx output

lspci -vxx output

lspci (text/plain), 30.01 KB, created by Žilvinas Valinskas on 2008-02-29 01:32:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Žilvinas Valinskas

Created: 2008-02-29 01:32:50 UTC

Size: 30.01 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information <?>
>	Kernel modules: intel-agp
>00: 86 80 a0 27 06 00 90 20 03 00 00 06 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
>
>00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 00004000-00004fff
>	Memory behind bridge: f4600000-f46fffff
>	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [88] Subsystem: Hewlett-Packard Company Unknown device 309f
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: fee0300c  Data: 4171
>	Capabilities: [a0] Express (v1) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>00: 86 80 a1 27 07 04 10 00 03 00 04 06 10 00 01 00
>10: 00 00 00 00 00 00 00 00 00 01 01 00 40 40 00 00
>20: 60 f4 60 f4 01 e0 f1 ef 00 00 00 00 00 00 00 00
>30: 00 00 00 00 88 00 00 00 00 00 00 00 0a 01 1c 00
>
>00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at f4700000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>00: 86 80 d8 27 06 00 10 00 01 00 03 04 10 00 00 00
>10: 04 00 70 f4 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
>
>00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	Memory behind bridge: f4100000-f41fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  2, PowerLimit 10.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: fee0300c  Data: 4179
>	Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 309f
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>00: 86 80 d0 27 07 04 10 00 01 00 04 06 10 00 81 00
>10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20
>20: 10 f4 10 f4 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00
>
>00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	Memory behind bridge: f4000000-f40fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  3, PowerLimit 0.160000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: fee0300c  Data: 4181
>	Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 309f
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>00: 86 80 d2 27 07 04 10 00 01 00 04 06 10 00 81 00
>10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20
>20: 00 f4 00 f4 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 04 00
>
>00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>	I/O behind bridge: 00002000-00003fff
>	Memory behind bridge: f0000000-f3ffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  4, PowerLimit 0.160000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: fee0300c  Data: 4189
>	Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 309f
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>00: 86 80 d6 27 07 04 10 00 01 00 04 06 10 00 81 00
>10: 00 00 00 00 00 00 00 00 00 04 04 00 20 30 00 00
>20: 00 f0 f0 f3 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 05 04 04 00
>
>00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 4: I/O ports at 5000 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 01 50 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
>
>00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 22
>	Region 4: I/O ports at 5020 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 21 50 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
>
>00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 18
>	Region 4: I/O ports at 5040 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 41 50 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
>
>00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 19
>	Region 4: I/O ports at 5060 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 61 50 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00
>
>00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at f4704000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>00: 86 80 cc 27 06 00 90 02 01 20 03 0c 00 00 00 00
>10: 00 40 70 f4 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
>
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=05, subordinate=09, sec-latency=32
>	Memory behind bridge: f4200000-f45fffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 309f
>00: 86 80 48 24 07 01 10 00 e1 01 04 06 00 00 01 00
>10: 00 00 00 00 00 00 00 00 00 05 09 20 f0 00 80 22
>20: 20 f4 50 f4 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 06 00
>
>00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information <?>
>	Kernel modules: intel-rng, iTCO_wdt
>00: 86 80 b9 27 07 00 10 02 01 00 01 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
>
>00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 5080 [size=16]
>	Kernel driver in use: ata_piix
>	Kernel modules: piix, ide-pci-generic, ata_piix, ata_generic, pata_acpi
>00: 86 80 df 27 05 00 80 02 01 8a 01 01 00 00 00 00
>10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
>20: 81 50 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
>
>00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01) (prog-if 01 [AHCI 1.0])
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 1275
>	Region 0: I/O ports at 13f0 [size=8]
>	Region 1: I/O ports at 15f4 [size=4]
>	Region 2: I/O ports at 1370 [size=8]
>	Region 3: I/O ports at 1574 [size=4]
>	Region 4: I/O ports at 50b0 [size=16]
>	Region 5: Memory at f4705000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>		Address: fee0300c  Data: 41a9
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ahci
>	Kernel modules: ahci
>00: 86 80 c5 27 07 04 b0 02 01 01 06 01 00 00 00 00
>10: f1 13 00 00 f5 15 00 00 71 13 00 00 75 15 00 00
>20: b1 50 00 00 00 50 70 f4 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00
>
>01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility X1600] (prog-if 00 [VGA controller])
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
>	Region 1: I/O ports at 4000 [size=256]
>	Region 2: Memory at f4600000 (32-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>00: 02 10 c5 71 07 00 10 00 00 00 00 03 10 00 00 00
>10: 08 00 00 e0 01 40 00 00 00 00 60 f4 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
>
>02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express (rev 21)
>	Subsystem: Hewlett-Packard Company Unknown device 309f
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 1273
>	Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data <?>
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
>		Address: 00000000fee0100c  Data: 41b9
>	Capabilities: [d0] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Kernel driver in use: tg3
>	Kernel modules: tg3
>00: e4 14 fd 16 06 04 10 00 21 00 00 02 10 00 00 00
>10: 04 00 10 f4 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 07 00 00 00 3c 10 9f 30
>30: 00 00 00 00 48 00 00 00 00 00 00 00 0a 01 00 00
>
>03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
>	Subsystem: Hewlett-Packard Company Compaq 6710b
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 1274
>	Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0300c  Data: 41b1
>	Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
>			ClockPM+ Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Kernel driver in use: iwl3945
>	Kernel modules: iwl3945
>00: 86 80 22 42 06 04 10 00 02 00 80 02 10 00 00 00
>10: 00 00 00 f4 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 5c 13
>30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00
>
>05:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
>	Subsystem: Hewlett-Packard Company nx9420
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 168, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=05, secondary=06, subordinate=09, sec-latency=176
>	Memory window 0: 88000000-8bfff000 (prefetchable)
>	Memory window 1: 8c000000-8ffff000
>	I/O window 0: 00001400-000014ff
>	I/O window 1: 00001800-000018ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>	Kernel driver in use: yenta_cardbus
>	Kernel modules: yenta_socket
>00: 4c 10 39 80 07 00 10 02 00 00 07 06 10 a8 82 00
>10: 00 00 20 f4 a0 00 00 02 05 06 09 b0 00 00 00 88
>20: 00 f0 ff 8b 00 00 00 8c 00 f0 ff 8f 00 14 00 00
>30: fc 14 00 00 00 18 00 00 fc 18 00 00 0b 01 c0 05
>40: 3c 10 9f 30 01 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>05:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
>	Subsystem: Hewlett-Packard Company nx9420
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 19
>	Region 0: Memory at f4201000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at f4204000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>00: 4c 10 3a 80 06 00 10 02 00 10 00 0c 10 40 80 00
>10: 00 10 20 f4 00 40 20 f4 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 02 04
>
>05:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
>	Subsystem: Hewlett-Packard Company nx9420
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	Region 0: Memory at f4208000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: tifm_7xx1
>	Kernel modules: tifm_7xx1
>00: 4c 10 3b 80 06 00 10 02 00 00 80 01 10 40 80 00
>10: 00 80 20 f4 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 07 04
>
>05:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
>	Subsystem: Hewlett-Packard Company nx9420
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin C routed to IRQ 22
>	Region 0: Memory at f4209000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: sdhci
>	Kernel modules: sdhci
>00: 4c 10 3c 80 06 00 10 02 00 00 05 08 10 40 80 00
>10: 00 90 20 f4 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 03 07 04
>
>05:06.4 Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller
>	Subsystem: Hewlett-Packard Company nx9420
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at f420a000 (32-bit, non-prefetchable) [size=4K]
>	Region 1: Memory at f420b000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: 4c 10 3d 80 02 00 10 02 00 00 80 07 00 00 80 00
>10: 00 a0 20 f4 00 b0 20 f4 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 9f 30
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 00 00
>

Actions: View

Attachments on bug 14687: 14589 | 14709 | 14710 | 14711

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.