Attachment 29968 Details for Bug 24247 – Output of dmesg

[patch] Output of dmesg

dmesg (text/plain), 32.68 KB, created by Kristian on 2009-09-30 22:55:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kristian

Created: 2009-09-30 22:55:30 UTC

Size: 32.68 KB

patch

obsolete

>Initializing cgroup subsys cpu
>Linux version 2.6.31.1 (root@kumiko) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu4) ) #1 PREEMPT Wed Sep 30 10:54:42 CEST 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffaa800 (usable)
> BIOS-e820: 000000003ffaa800 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>last_pfn = 0x3ffaa max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FC0000000 write-back
>  1 base 0FEDA0000 mask FFFFE0000 write-combining
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 7000-c000
>RAMDISK: 2fdbb000 - 2ffffd0c
>ACPI: RSDP 000fde90 00014 (v00 DELL  )
>ACPI: RSDT 3ffefbcd 00030 (v01 DELL    CPi R   27D50308 ASL  00000061)
>ACPI: FACP 3fff0400 00074 (v01 DELL    CPi R   27D50308 ASL  00000061)
>ACPI: DSDT 3fff1000 024E3 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
>ACPI: FACS 3ffff800 00040
>ACPI: APIC 3fff0c00 00068 (v01 DELL    CPi R   27D50308 ASL  00000047)
>ACPI: SSDT 3ffefbfd 001FB (v01  PmRef    CpuPm 00003000 INTL 20030522)
>ACPI: Local APIC address 0xfee00000
>135MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>  node 0 low ram: 00000000 - 377fe000
>  node 0 bootmap 00008000 - 0000ef00
>(7 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0001000000 - 00013bfd04]    TEXT DATA BSS ==> [0001000000 - 00013bfd04]
>  #2 [002fdbb000 - 002ffffd0c]          RAMDISK ==> [002fdbb000 - 002ffffd0c]
>  #3 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #4 [00013c0000 - 00013c6158]              BRK ==> [00013c0000 - 00013c6158]
>  #5 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #6 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0003ffaa
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003ffaa
>On node 0 totalpages: 261961
>free_area_init_node: node 0, pgdat c132d1b8, node_mem_map c13c7000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 272 pages used for memmap
>  HighMem zone: 34460 pages, LIFO batch:7
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>nr_irqs_gsi: 24
>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259913
>Kernel command line: BOOT_IMAGE=/usr/src/linux-2.6.31.1/arch/x86/boot/bzImage root=/dev/sda2 ro gfxpayload=1024x768 quiet
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0003ffaa)
>Memory: 1032176k/1048232k available (2237k kernel code, 15208k reserved, 1024k data, 296k init, 138928k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffa4000 - 0xfffff000   ( 364 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1330000 - 0xc137a000   ( 296 kB)
>      .data : 0xc122f7d9 - 0xc132fab4   (1024 kB)
>      .text : 0xc1000000 - 0xc122f7d9   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>NR_IRQS:288
>CPU 0 irqstacks, hard=c12fa000 soft=c12fb000
>Fast TSC calibration using PIT
>Detected 3192.122 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.24 BogoMIPS (lpj=3192122)
>Mount-cache hash table entries: 512
>Initializing cgroup subsys cpuacct
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>mce: CPU supports 4 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090521
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfcc7e, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: Enabling MCH 'Overflow' Device
>pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
>pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
>pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
>pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
>pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
>pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8fffc00-0xf8ffffff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH4 GPIO
>pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
>pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
>pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
>pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
>pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
>pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
>pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
>pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f]
>pci 0000:00:1f.5: reg 18 32bit mmio: [0xf8fff800-0xf8fff9ff]
>pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf8fff400-0xf8fff4ff]
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.5: PME# disabled
>pci 0000:00:1f.6: reg 10 io port: [0xd400-0xd4ff]
>pci 0000:00:1f.6: reg 14 io port: [0xd080-0xd0ff]
>pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.6: PME# disabled
>pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
>pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff]
>pci 0000:01:00.0: reg 18 32bit mmio: [0xfcff0000-0xfcffffff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0x80000000-0x8001ffff]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
>pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
>pci 0000:02:00.0: reg 10 32bit mmio: [0xfaffe000-0xfaffffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
>pci 0000:02:01.0: supports D1 D2
>pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:02:01.1: reg 10 32bit mmio: [0xfaffd800-0xfaffdfff]
>pci 0000:02:01.1: reg 14 32bit mmio: [0xfaff8000-0xfaffbfff]
>pci 0000:02:01.1: supports D1 D2
>pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:01.1: PME# disabled
>pci 0000:02:03.0: reg 10 32bit mmio: [0xfaff6000-0xfaff7fff]
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>cfg80211: Calling CRDA to update world regulatory domain
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:03: io resource (0x1010-0x105f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9fbff could not be reserved
>system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xcffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved
>system 00:00: iomem range 0x3fff0000-0x3fffffff has been reserved
>system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
>system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
>system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
>system 00:00: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:00: iomem range 0xfecf0000-0xfecf0fff has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:03: ioport range 0xf400-0xf4fe has been reserved
>system 00:03: ioport range 0x1080-0x10bf has been reserved
>system 00:03: ioport range 0x10c0-0x10df has been reserved
>system 00:03: ioport range 0x10e0-0x10ff has been reserved
>system 00:08: ioport range 0x900-0x97f has been reserved
>pci 0000:01:00.0: BAR 6: no parent found for of device [0x80000000-0x8001ffff]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xc000-0xcfff
>pci 0000:00:01.0:   MEM window: 0xfc000000-0xfdffffff
>pci 0000:00:01.0:   PREFETCH window: 0xe0000000-0xefffffff
>pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
>pci 0000:02:01.0:   IO window: 0x00e000-0x00e0ff
>pci 0000:02:01.0:   IO window: 0x00e400-0x00e4ff
>pci 0000:02:01.0:   PREFETCH window: 0x40000000-0x43ffffff
>pci 0000:02:01.0:   MEM window: 0x48000000-0x4bffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0xe000-0xefff
>pci 0000:00:1e.0:   MEM window: 0xfa000000-0xfbffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x43ffffff
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:02:01.0: enabling device (0000 -> 0003)
>pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
>pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
>pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfbffffff]
>pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
>pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:03: resource 0 io:  [0xe000-0xe0ff]
>pci_bus 0000:03: resource 1 io:  [0xe400-0xe4ff]
>pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff]
>pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs...
>Freeing initrd memory: 2323k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1254309294.226:1): initialized
>highmem bounce pool size: 64 pages
>msgmni has been set to 1750
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PBTN]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SBTN]
>resource map sanity check conflict: 0x3ffefe54 0x3fff002b 0x3fff0000 0x3fffffff pnp 00:00
>------------[ cut here ]------------
>WARNING: at arch/x86/mm/ioremap.c:205 __ioremap_caller+0x65/0x20b()
>Hardware name: Inspiron 9100                   
>Info: mapping multiple BARs. Your kernel is fine.
>Modules linked in:
>Pid: 1, comm: swapper Not tainted 2.6.31.1 #1
>Call Trace:
> [<c101e0bc>] warn_slowpath_common+0x65/0x7c
> [<c1015462>] ? __ioremap_caller+0x65/0x20b
> [<c101e107>] warn_slowpath_fmt+0x24/0x27
> [<c1015462>] __ioremap_caller+0x65/0x20b
> [<c110f2b9>] ? acpi_ns_search_and_enter+0x8f/0x142
> [<c10156c4>] ioremap_nocache+0x10/0x12
> [<c12287a2>] ? acpi_os_map_memory+0x11/0x1a
> [<c12287a2>] acpi_os_map_memory+0x11/0x1a
> [<c110cc6f>] acpi_ex_system_memory_space_handler+0xf1/0x1e2
> [<c11061a5>] acpi_ev_address_space_dispatch+0x13e/0x182
> [<c110cb7e>] ? acpi_ex_system_memory_space_handler+0x0/0x1e2
> [<c1108987>] acpi_ex_load_op+0x93/0x265
> [<c11098c2>] ? acpi_ex_resolve_to_value+0x1ba/0x1c8
> [<c110b733>] ? acpi_ex_resolve_operands+0x17b/0x3f4
> [<c110b1a2>] acpi_ex_opcode_1A_1T_0R+0x20/0x44
> [<c11039ee>] acpi_ds_exec_end_op+0xd0/0x35e
> [<c1112cc2>] acpi_ps_parse_loop+0x5d3/0x719
> [<c11120e4>] acpi_ps_parse_aml+0x89/0x283
> [<c111339b>] acpi_ps_execute_method+0x197/0x250
> [<c110fc26>] acpi_ns_evaluate+0xc6/0x178
> [<c110f772>] acpi_evaluate_object+0x102/0x1f1
> [<c100edb5>] ? arch_acpi_processor_init_pdc+0x74/0x117
> [<c1355cfd>] acpi_processor_start+0x340/0x480
> [<c109f036>] ? sysfs_addrm_finish+0x15/0x1d8
> [<c109f976>] ? sysfs_do_create_link+0xbf/0x10a
> [<c10fc7cc>] acpi_start_single_object+0x1e/0x3f
> [<c10fc9d7>] acpi_device_probe+0x81/0x13a
> [<c113dd64>] driver_probe_device+0x78/0xeb
> [<c113de1a>] __driver_attach+0x43/0x5f
> [<c113d7a1>] bus_for_each_dev+0x3d/0x67
> [<c113dc3e>] driver_attach+0x14/0x16
> [<c113ddd7>] ? __driver_attach+0x0/0x5f
> [<c113d24a>] bus_add_driver+0x94/0x1be
> [<c113e047>] driver_register+0x79/0xe0
> [<c10fdd9e>] acpi_bus_register_driver+0x3a/0x3c
> [<c13488af>] acpi_processor_init+0x63/0x9b
> [<c134884c>] ? acpi_processor_init+0x0/0x9b
> [<c1001133>] _stext+0x4b/0x130
> [<c133020b>] kernel_init+0x81/0xd2
> [<c133018a>] ? kernel_init+0x0/0xd2
> [<c10030b3>] kernel_thread_helper+0x7/0x10
>---[ end trace a7919e7f17c0a725 ]---
>ACPI: SSDT 3ffefe54 001D8 (v01  PmRef  Cpu0Cst 00003001 INTL 20030522)
>processor LNXCPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (64 C)
>ACPI: Battery Slot [BAT0] (battery absent)
>intel_rng: FWH not detected
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using get_cycles().
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>serial 0000:00:1f.6: PCI INT B disabled
>loop: module loaded
>nbd: registered device at major 43
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
>yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0159]
>yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
>yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:02:01.0: TI: mfunc 0x012c1202, devctl 0x64
>ata2.00: ATAPI: Samsung CD-RW/DVD-ROM SN-324B, U102, max UDMA/33
>ata1.00: ATA-6: HTS548060M9AT00, MGBOA53A, max UDMA/100
>ata1.00: 117210240 sectors, multi 8: LBA48 
>ata2.00: configured for UDMA/33
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      HTS548060M9AT00  MGBO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: CD-ROM            SAMSUNG  CDRW/DVD SN-324B U102 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
> sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cf8, PCI irq 19
>yenta_cardbus 0000:02:01.0: Socket status: 30000086
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xfa000000 - 0xfbffffff
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
>usbmon: debugfs is not available
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8fffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31.1 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31.1 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf60
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31.1 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31.1 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bf20
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.31.1 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>NET: Registered protocol family 17
>p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>Using IPI Shortcut mode
>rtc_cmos 00:06: setting system clock to 2009-09-30 11:14:54 UTC (1254309294)
>Freeing unused kernel memory: 296k freed
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>Switched to high resolution mode on CPU 0
>b44 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>fuse init (API version 7.12)
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
>b44.c:v2.0
>usb 1-4: new high speed USB device using ehci_hcd and address 2
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0f:1f:2a:47:6d
>usb 1-4: New USB device found, idVendor=04cc, idProduct=1521
>usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-4: configuration #1 chosen from 1 choice
>hub 1-4:1.0: USB hub found
>hub 1-4:1.0: 6 ports detected
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with writeback data mode.
>input: DualPoint Stick as /devices/platform/i8042/serio1/input/input4
>input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5
>usb 1-4.1: new high speed USB device using ehci_hcd and address 4
>usb 1-4.1: New USB device found, idVendor=0b95, idProduct=7720
>usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-4.1: Product: AX88772 
>usb 1-4.1: Manufacturer: ASIX Elec. Corp.
>usb 1-4.1: SerialNumber: 000001
>usb 1-4.1: configuration #1 chosen from 1 choice
>usb 1-4.6: new full speed USB device using ehci_hcd and address 5
>usb 1-4.6: New USB device found, idVendor=0451, idProduct=2046
>usb 1-4.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-4.6: configuration #1 chosen from 1 choice
>hub 1-4.6:1.0: USB hub found
>hub 1-4.6:1.0: 4 ports detected
>usb 4-2: new low speed USB device using uhci_hcd and address 2
>usb 4-2: New USB device found, idVendor=046d, idProduct=c517
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: USB Receiver
>usb 4-2: Manufacturer: Logitech
>usb 4-2: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input6
>logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
>logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input7
>logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
>usb 1-4.6.1: new low speed USB device using ehci_hcd and address 6
>usb 1-4.6.1: New USB device found, idVendor=0711, idProduct=0260
>usb 1-4.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-4.6.1: Product: USB PS/2 Keyboard - PS/2 Mouse
>usb 1-4.6.1: Manufacturer: MCT
>usb 1-4.6.1: configuration #1 chosen from 1 choice
>input: MCT USB PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.6/1-4.6.1/1-4.6.1:1.0/input/input8
>generic-usb 0003:0711:0260.0003: input: USB HID v1.00 Keyboard [MCT USB PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1d.7-4.6.1/input0
>input: MCT USB PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.6/1-4.6.1/1-4.6.1:1.1/input/input9
>generic-usb 0003:0711:0260.0004: input: USB HID v1.00 Mouse [MCT USB PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1d.7-4.6.1/input1
>usb 1-4.6.2: new full speed USB device using ehci_hcd and address 7
>usb 1-4.6.2: New USB device found, idVendor=067b, idProduct=2305
>usb 1-4.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-4.6.2: Product: IEEE-1284 Controller
>usb 1-4.6.2: Manufacturer: Prolific Technology Inc.
>usb 1-4.6.2: configuration #1 chosen from 1 choice
>usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
>usb 1-4.6.3: new full speed USB device using ehci_hcd and address 8
>usb 1-4.6.3: New USB device found, idVendor=067b, idProduct=2303
>usb 1-4.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-4.6.3: Product: USB-Serial Controller
>usb 1-4.6.3: Manufacturer: Prolific Technology Inc.
>usb 1-4.6.3: configuration #1 chosen from 1 choice
>usb 1-4.6.4: new full speed USB device using ehci_hcd and address 9
>usb 1-4.6.4: New USB device found, idVendor=0d8c, idProduct=000c
>usb 1-4.6.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-4.6.4: Product: C-Media USB Headphone Set  
>usb 1-4.6.4: configuration #1 chosen from 1 choice
>input: C-Media USB Headphone Set   as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.6/1-4.6.4/1-4.6.4:1.3/input/input10
>generic-usb 0003:0D8C:000C.0005: input: USB HID v1.00 Device [C-Media USB Headphone Set  ] on usb-0000:00:1d.7-4.6.4/input3
>udev: starting version 147
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 865 Chipset
>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon default to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFCFF0000
>[drm] register mmio size: 65536
>[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
>[drm] Clocks initialized !
>[drm] Generation 2 PCI interface, using max accessible memory
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 128bits DDR
>[drm] radeon: 2 quad pipes, 1 z pipes initialized.
>agpgart-intel 0000:00:00.0: AGP 3.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V3 device into 4x mode
>radeon 0000:01:00.0: putting AGP V3 device into 4x mode
>[drm] radeon: VRAM 256M
>[drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
>[drm] radeon: GTT 128M
>[drm] radeon: GTT from 0xF0000000 to 0xF7FFFFFF
>[drm] radeon: irq initialized.
>[TTM] TTM available graphics memory: 505 MiB
>[TTM] TTM available object memory: 437 MiB
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 128M of GTT memory ready.
>[drm] radeon: cp idle (0x10000C03)
>[drm] Loading R400 Microcode
>[drm] radeon: ring at 0x00000000F0000000
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] DFP table revision: 4
>[drm] Panel ID String: 
>[drm] Panel Size 0x0
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DVI-I
>[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_DAC2
>[drm]     DFP1: INTERNAL_TMDS1
>[drm] Connector 1:
>[drm]   VGA
>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC1
>[drm] Connector 2:
>[drm]   LVDS
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_LVDS
>i2c-adapter i2c-0: unable to read EDID block.
>radeon 0000:01:00.0: DVI-I-1: no EDID data
>eth1: register 'asix' at usb-0000:00:1d.7-4.1, ASIX AX88772 USB 2.0 Ethernet, 00:05:1b:00:04:40
>usbcore: registered new interface driver asix
>[drm] fb mappable at 0xE0040000
>[drm] vram apper at 0xE0000000
>[drm] size 3145728
>[drm] fb depth is 24
>[drm]    pitch is 4096
>[drm] DAC-8: set mode 1024x768 17
>Console: switching to colour frame buffer device 128x48
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] radeon: kernel modesetting successfully initialized.
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>Adding 1959888k swap on /dev/sda1.  Priority:-1 extents:1 across:1959888k 
>EXT3 FS on sda2, internal journal
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>divide error: 0000 [#1] PREEMPT 
>last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0/resource
>Modules linked in: cpufreq_powersave radeon ttm drm asix dcdbas i2c_algo_bit intel_agp usbnet agpgart b44 ssb mii fuse
>
>Pid: 2220, comm: Xorg Tainted: G        W  (2.6.31.1 #1) Inspiron 9100                   
>EIP: 0060:[<f81f7e02>] EFLAGS: 00013246 CPU: 0
>EIP is at radeon_crtc_scaling_mode_fixup+0xce/0x171 [radeon]
>EAX: 00000006 EBX: f6b6e000 ECX: 00000000 EDX: 00000000
>ESI: 00000000 EDI: 00000000 EBP: f6b05c7c ESP: f6b05c64
> DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
>Process Xorg (pid: 2220, ti=f6b05000 task=f6a31880 task.ti=f6b05000)
>Stack:
> 00300000 00000000 00000006 f823e23c f73c565c f6b6e0e8 f6b05c84 f81f3a73
><0> f6b05d8c f80aa8b1 00000000 00000000 00000010 00000000 f823e23c f73c5660
><0> efd31e00 f73c5400 efd31400 f6b6e000 efd31300 efd31300 00000017 dededede
>Call Trace:
> [<f81f3a73>] ? radeon_crtc_mode_fixup+0x8/0xa [radeon]
> [<f80aa8b1>] ? drm_crtc_helper_set_mode+0x149/0x341 [drm]
> [<f80aaf65>] ? drm_crtc_helper_set_config+0x446/0x5a9 [drm]
> [<f80a8e0d>] ? drm_mode_object_find+0x45/0x4d [drm]
> [<f80a9907>] ? drm_mode_setcrtc+0x241/0x262 [drm]
> [<f80a13be>] ? drm_ioctl+0x1ef/0x27c [drm]
> [<f80a96c6>] ? drm_mode_setcrtc+0x0/0x262 [drm]
> [<c1048821>] ? unlock_page+0x3d/0x40
> [<c1072171>] ? vfs_ioctl+0x57/0x71
> [<c10726a4>] ? do_vfs_ioctl+0x46c/0x4aa
> [<c105838d>] ? handle_mm_fault+0x1fe/0x495
> [<c1072710>] ? sys_ioctl+0x2e/0x48
> [<c1002874>] ? sysenter_do_call+0x12/0x26
>Code: 00 00 c1 e7 0c 89 55 e8 c7 45 ec 00 00 00 00 8b 45 e8 8b 55 ec 0f a4 c2 0d c1 e0 0d 89 55 f0 89 c1 31 f6 85 d2 74 0b 89 d0 31 d2 <f7> f7 89 55 f0 89 c6 8b 55 f0 89 c8 f7 f7 89 f2 89 c6 89 d7 83 
>EIP: [<f81f7e02>] radeon_crtc_scaling_mode_fixup+0xce/0x171 [radeon] SS:ESP 0068:f6b05c64
>---[ end trace a7919e7f17c0a727 ]---

Actions: View | Splinter Review

Attachments on bug 24247: 29968 | 29969 | 29970 | 29971

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.