After activating my second TFT via xrandr I can see this in powertop: ( 59,7) <interrupt> : ATI IXP, radeon@pci:0000:01:05.0 When I switch to a console and back, everything is normal again. I'm using xorg-7.3 and xf86-video-ati-git from 20.01.08
Created attachment 13863 [details] [review] Xorg.0.log
Created attachment 13864 [details] [review] xorg.conf
jan@jan ~ $ xrandr --verbose -q Screen 0: minimum 320 x 200, current 2720 x 900, maximum 2720 x 900 VGA-0 disconnected 1440x900+1280+0 (0x78) normal (normal left inverted right x axis y axis) 0mm x 0mm Identifier: 0x4c Timestamp: 28371 Subpixel: no subpixels Clones: CRTC: 1 CRTCs: 0 1 load_detection: 0 (0x00000000) range: (0,1) 1440x900 (0x78) 106.5MHz -HSync +VSync h: width 1440 start 1528 end 1672 total 1904 skew 0 clock 55.9KHz v: height 900 start 903 end 909 total 934 clock 59.9Hz LVDS connected 1280x800+0+0 (0x4f) normal (normal left inverted right x axis y axis) 0mm x 0mm Identifier: 0x4d Timestamp: 28371 Subpixel: horizontal rgb Clones: CRTC: 0 CRTCs: 0 scaler: full backlight: 255 (0x000000ff) range: (0,255) 1280x800 (0x4f) 68.9MHz h: width 1280 start 1288 end 1336 total 1408 skew 0 clock 48.9KHz v: height 800 start 802 end 805 total 816 clock 60.0Hz 1280x800 (0x50) 83.5MHz -HSync +VSync h: width 1280 start 1344 end 1480 total 1680 skew 0 clock 49.7KHz v: height 800 start 801 end 804 total 828 clock 60.0Hz 1280x768 (0x51) 80.1MHz -HSync +VSync h: width 1280 start 1344 end 1480 total 1680 skew 0 clock 47.7KHz v: height 768 start 769 end 772 total 795 clock 60.0Hz 1280x720 (0x52) 74.5MHz -HSync +VSync h: width 1280 start 1336 end 1472 total 1664 skew 0 clock 44.8KHz v: height 720 start 721 end 724 total 746 clock 60.0Hz 1024x768 (0x53) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 800x600 (0x54) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 640x480 (0x55) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz S-video disconnected (normal left inverted right x axis y axis) Identifier: 0x4e Timestamp: 28371 Subpixel: no subpixels Clones: CRTCs: 0 1 tv_standard: ntsc tv_vertical_position: 0 (0x00000000) range: (-5,5) tv_horizontal_position: 0 (0x00000000) range: (-5,5) tv_horizontal_size: 0 (0x00000000) range: (-5,5) load_detection: 0 (0x00000000) range: (0,1)
Is this still an issue with a newer driver (6.9.0 or newer)?
nope, with F10 it's fixed. I just checked. Thanks!
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.