Created attachment 14753 [details] Xorg log I have a Asus M2A-VM with onboard RS690 Radeon x1250. I downloaded radeonhd from the latest git repository. I built and installed it. When I run startx my DVI-D LCD flashes on and off. It seems to detect my hardware correctly. I don't understand why there are ? on ether side of 1250: "?1250?" (--) RADEONHD(0): Detected an RS690 on a Asus M2A-VM (II) RADEONHD(0): Mapped IO at 0x2ae4748d1000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1043 SubsystemID: 0x826d IOBaseAddress: 0xcc00 Filename: BR26529.bin BIOS Bootup Message: ATI Radeon Xpress ?1250? for Asus/M2A-VM (--) RADEONHD(0): VideoRAM: 131072 kByte Thank you for your time. -Curt
Created attachment 14754 [details] xorg.conf
Created attachment 15373 [details] New Xorg.0.log
Created attachment 15374 [details] new xorg.conf
#xrandr -q; xrandr -q --verbose Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1680 VGA_1 disconnected (normal) Identifier: 0x43 Timestamp: 62784236 Subpixel: unknown Clones: TV_SVIDEO DVI-D_1 DVI-D_2 CRTCs: 0 1 RANDR_OUTPUT_NUMBER: 1 (0x00000001) RANDR_PANING_AREA: RANDR_CONNECTOR_NUMBER: 1 (0x00000001) RANDR_CONNECTOR_TYPE: VGA RANDR_SIGNAL_FORMAT: VGA TV_SVIDEO disconnected (normal) Identifier: 0x44 Timestamp: 62784236 Subpixel: unknown Clones: VGA_1 DVI-D_1 DVI-D_2 CRTCs: 0 1 RANDR_OUTPUT_NUMBER: 1 (0x00000001) RANDR_PANING_AREA: RANDR_CONNECTOR_NUMBER: 2 (0x00000002) RANDR_CONNECTOR_TYPE: TV RANDR_SIGNAL_FORMAT: unknown DVI-D_1 disconnected (normal) Identifier: 0x45 Timestamp: 62784236 Subpixel: unknown Clones: VGA_1 TV_SVIDEO DVI-D_2 CRTCs: 0 1 RANDR_OUTPUT_NUMBER: 2 (0x00000002) RANDR_PANING_AREA: RANDR_CONNECTOR_NUMBER: 3 (0x00000003) RANDR_CONNECTOR_TYPE: DVI RANDR_SIGNAL_FORMAT: TMDS DVI-D_2 connected 1680x1050+0+0 (0x47) normal (normal) 473mm x 296mm Identifier: 0x46 Timestamp: 62784236 Subpixel: unknown Clones: VGA_1 TV_SVIDEO DVI-D_1 CRTC: 0 CRTCs: 0 1 RANDR_OUTPUT_NUMBER: 2 (0x00000002) RANDR_PANING_AREA: RANDR_CONNECTOR_NUMBER: 4 (0x00000004) RANDR_CONNECTOR_TYPE: TMDS RANDR_SIGNAL_FORMAT: TMDS 1680x1050 (0x47) 146.0MHz -HSync -VSync h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.2KHz v: height 1050 start 1053 end 1059 total 1089 clock 59.9Hz 1680x1050 (0x48) 147.0MHz -HSync +VSync h: width 1680 start 1787 end 1966 total 2252 skew 0 clock 65.3KHz v: height 1050 start 1053 end 1059 total 1089 clock 59.9Hz 1400x1050 (0x49) 156.5MHz -HSync +VSync h: width 1400 start 1499 end 1650 total 1900 skew 0 clock 82.4KHz v: height 1050 start 1053 end 1057 total 1099 clock 74.9Hz 1280x1024 (0x4a) 135.0MHz +HSync +VSync h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz 1440x900 (0x4b) 136.8MHz -HSync +VSync h: width 1440 start 1535 end 1689 total 1938 skew 0 clock 70.6KHz v: height 900 start 903 end 909 total 942 clock 74.9Hz 1440x900 (0x4c) 107.0MHz -HSync +VSync h: width 1440 start 1524 end 1675 total 1910 skew 0 clock 56.0KHz v: height 900 start 903 end 909 total 934 clock 60.0Hz 1152x864 (0x4d) 108.0MHz +HSync +VSync h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz v: height 864 start 865 end 868 total 900 clock 75.0Hz 1152x864 (0x4e) 104.8MHz -HSync +VSync h: width 1152 start 1227 end 1349 total 1546 skew 0 clock 67.8KHz v: height 864 start 867 end 871 total 905 clock 74.9Hz 1024x768 (0x4f) 78.8MHz +HSync +VSync h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz v: height 768 start 769 end 772 total 800 clock 75.1Hz 1024x768 (0x50) 75.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz v: height 768 start 771 end 777 total 806 clock 70.1Hz 1024x768 (0x51) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 832x624 (0x52) 57.3MHz -HSync -VSync h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz v: height 624 start 625 end 628 total 667 clock 74.6Hz 800x600 (0x53) 50.0MHz +HSync +VSync h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz v: height 600 start 637 end 643 total 666 clock 72.2Hz 800x600 (0x54) 49.5MHz +HSync +VSync h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz v: height 600 start 601 end 604 total 625 clock 75.0Hz 800x600 (0x55) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 800x600 (0x56) 36.0MHz +HSync +VSync h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 640x480 (0x57) 31.5MHz -HSync -VSync h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz v: height 480 start 481 end 484 total 500 clock 75.0Hz 640x480 (0x58) 31.5MHz -HSync -VSync h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz v: height 480 start 489 end 491 total 520 clock 72.8Hz 640x480 (0x59) 30.2MHz -HSync -VSync h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz v: height 480 start 483 end 486 total 525 clock 66.7Hz 640x480 (0x5a) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 60.0Hz 720x400 (0x5b) 28.3MHz -HSync +VSync h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz v: height 400 start 412 end 414 total 449 clock 70.1Hz
updating xorg version info. (I had posted that it was 7.2, which is wrong) X.Org X Server 1.4.0.90 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu5) Current Operating System: Linux georgedesktop 2.6.24-12-generic #1 SMP Wed Mar 12 22:31:43 UTC 2008 x86_64 Build Date: 13 March 2008 05:48:21PM
Can you check if this still happens with the latest git sources? Some fixes for RS690 were committed last Monday. [Reassigning to reporter for feedback]
Looks like this is a 1680x1050 mode with a 146 MHz pixel clock. Curt, could you please retest the latest GIT version of this driver? Some changes relating to RS690 went in so this problem may already be resolved.
Egbert, there has been no response from curt on this issue, so i guess we can close this one.
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.