Created attachment 23415 [details] [review] Xorg.0.log file for radeon driver I did a fresh install of jaunty alpha 5 x-server 1.5.99.902-7 libxrandr 1.2.99.4-2 The radeon driver (6.11.0-2) now ignores my second monitor. Second monitor works perfectly if i install radeonhd 1.2.4-2 and use OPTION "HPD" "off" The only thing added to /etc/X11/xorg.conf is virtual size to allow larger screen area.
Created attachment 23416 [details] [review] xorg.conf used with radeon
Can you attach your radeonhd log as well? Also, what connectors does your card have and what connectors do you have the monitors connected to? Finally can you attach your video bios? How to get your video bios: (as root) cd /sys/bus/pci/devices/<pci bus id of your video card>/ echo 1 > rom cat rom > /tmp/rv260.rom echo 0 > rom
Created attachment 23426 [details] rom mur@ubuntu2:/sys/bus/pci/devices/0000:01:00.0$ sudo -s root@ubuntu2:/sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0# echo 1 > rom root@ubuntu2:/sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0# cat rom > /tmp/rv260.rom root@ubuntu2:/sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0# echo 0 > rom root@ubuntu2:/sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0# ls -al /tmp/rv260.rom -rw-r--r-- 1 root root 64000 2009-03-01 20:13 /tmp/rv260.rom root@ubuntu2:/sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0# ls broken_parity_status device local_cpulist msi_bus resource0 resource4 subsystem_device vendor class enable local_cpus power resource0_wc rom subsystem_vendor config irq modalias resource resource2 subsystem uevent
Created attachment 23427 [details] [review] Radeonhd log post jaunty alpha 5 + python updates My problem has returned (i.e. both outputs are tied together). Immediately after a fresh install of jaunty alpha 5 radeonhd worked perfectly with OPTION "HPD" "off". Now after all the Python fixes, the problem has returned. mur@ubuntu2:~$ xrandr -q Screen 0: minimum 320 x 200, current 1152 x 864, maximum 2704 x 1050 VGA_1 connected 1152x864+0+0 0mm x 0mm 1152x864 60.0*+ 1360x768 59.8 1024x768 60.0 800x600 60.3 640x480 59.9 DVI-D_1 disconnected DVI-I_2/digital disconnected DVI-I_2/analog connected 1152x864+0+0 0mm x 0mm 1152x864 60.0*+ 1360x768 59.8 1024x768 60.0 800x600 60.3 640x480 59.9 mur@ubuntu2:~$ xrandr --output VGA_1 --mode 1024x768 mur@ubuntu2:~$ xrandr -q Screen 0: minimum 320 x 200, current 1152 x 864, maximum 2704 x 1050 VGA_1 connected 1024x768+0+0 0mm x 0mm 1152x864 60.0 + 1360x768 59.8 1024x768 60.0* 800x600 60.3 640x480 59.9 DVI-D_1 disconnected DVI-I_2/digital disconnected DVI-I_2/analog connected 1024x768+0+0 0mm x 0mm 1152x864 60.0 + 1360x768 59.8 1024x768 60.0* 800x600 60.3 640x480 59.9
I have two analog monitors connected to a PowerColor AX3450 256MD2-H. The primary monitor is an Daytek LCD connected to VGA_1. The secondary monitor is a Daytek CRT connected via analog adapter to DVI_2/analog. The mother board is a Sapphire PI-AM2RS690MHD board with the IGA not being used because it does not get configured. The BIOS does not allow it to be disabled. This system has 3GB of memory because I wanted to remove problems 4GB may cause. I have 4GB if testing with that will help. I have another system with a Gigabyte MA78GM-S2H that give similar results. I use it primarily with Vista64 as the RS780 works with my other HD3450. Same monitors used with it. I have 4GB of memory on this system as it is needed when I run VirtualPC for XP applications. My goal is to have three monitors functioning on Ubuntu Linux. I am using ext4. I rebuild this system from scratch every alpha release to test install issues. It was time consuming to install under jaunty alpha 2. I am willing to test with git sources if that is useful. I don't know if this problem is the driver or xrandr. Suggest and I will test it.
The question was what connectors does the PowerColor HD3450 have: 1) 9 pin VGA 2) DVI connector c/w analog pins 3) HDMI
Created attachment 23630 [details] Xorg.0.log file for radeonhd OPTION "HPD" "off" Radeonhd is working with newest updates and OPTION "HPD" "off". If I use OPTION "HPD" "swap" I get the same disconnected message for the second monitor as when I use the radeon driver. I now have DVI-D_1 available to control the second monitor and I use it instead of DVI-I_2/analog. libxrandr 1.2.99.4-2 radeon 6.11.0-5 radeonhd 1.2.4-2 mur@ubuntu2:~$ uname -a Linux ubuntu2 2.6.28-8-generic #28-Ubuntu SMP Fri Mar 6 00:09:20 UTC 2009 x86_64 GNU/Linux mur@ubuntu2:~$ xrandr Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 2704 x 1050 VGA_1 connected 1280x1024+0+0 260mm x 195mm 1280x1024 60.0*+ 1152x864 75.0 1024x768 75.1 70.1 60.0 43.5 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 60.0 720x400 87.8 70.1 DVI-D_1 connected 1280x1024+0+0 260mm x 195mm 1280x1024 60.0*+ 1152x864 75.0 1024x768 75.1 70.1 60.0 43.5 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 60.0 720x400 87.8 70.1 DVI-I_2/digital disconnected DVI-I_2/analog connected 1152x864+0+0 0mm x 0mm 1360x768 59.8 1152x864 60.0* 1024x768 60.0 800x600 60.3 640x480 59.9 mur@ubuntu2:~$ xrandr --output VGA_1 --mode 1152x864 mur@ubuntu2:~$ xrandr --output VGA_1 --right-of DVI-D_1
Created attachment 23857 [details] Xorg.0.log x-server 2:1.6.0-0ubuntu1 libxrandr 2:1.2.99.4-2 radeonhd 1.2.4+git2009031 I get the best results with Section "Device" Identifier "HD3450" Driver "radeonhd" Option "monitor-VGA_1" "Daytek LCD TV" Option "monitor-DVI-I_2/analog" "Daytek 17 inch CRT" Option "RROutputOrder" "Daytek LCD TV" Option "DRI" EndSection The Option "HPD" "off" is no longer required. My server layout section seems to be ignored.
Created attachment 23858 [details] xorg.conf
This should be fixed now in git: 6ae54d3ea023968887bf0cb0ec1be2115621d554
Confirmed Bug Fixed
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.