Xorg can't use this card with radeon driver, whereas "radeon hd 4650" (not mobility) is supported. No freeze, crash or something, simply refuses to start. Is it possible to add support for it? Using latest git (496adc4dc7cf53fc6acfecb1158f1491d5f36168). Thanks, Florian Klink
Created attachment 26999 [details] Xorg startup log with radeon driver
What are your pci ids (lspci -vn)? They may just be missing from the driver.
Sorry... here you go... -------------------------------------------------------------------------- 01:00.0 0300: 1002:9480 (prog-if 00 [VGA controller]) Subsystem: 104d:9035 Flags: bus master, fast devsel, latency 0, IRQ 32 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at d000 [size=256] Memory at d0020000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at d0000000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable+ Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: fglrx_pci Kernel modules: fglrx 01:00.1 0403: 1002:aa38 Subsystem: 104d:9035 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d0030000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable- Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel -------------------------------------------------------------------------- 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M96 [Mobility Radeon HD 4650] [1002:9480] (prog-if 00 [VGA controller]) Subsystem: Sony Corporation Device [104d:9035] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at d000 [size=256] Region 2: Memory at d0020000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at d0000000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable+ Address: 00000000fee0300c Data: 41c1 Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: fglrx_pci Kernel modules: fglrx --------------------------------------------------------------------------- 01:00.1 Audio device [0403]: ATI Technologies Inc R700 Audio Device [Radeon HD 4000 Series] [1002:aa38] Subsystem: Sony Corporation Device [104d:9035] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at d0030000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel
pushed to master and 6.12-branch: 68001981f22173ff949720055dba89291f284474 2ba11f922321076027f0a08ec5bd079871ae73f8
fixes it for me. thanks!
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.