Created attachment 27276 [details] [review] Xorg logfile After restarting x I only here the "beep" and then see a black screen. On my second test I disabled the DRI part and the AccelMethod in the xorg.conf and restart the X again. I could see a twinkle, then black again and the the twinkle again and so on.... xorg.conf: Section "Files" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "evdev" # Option "CorePointer" # Option "Device" "/dev/input/event5" # Option "Protocol" "auto" Option "Name" "Logitech MX Revolution" # Option "Resolution" "800" # doesn't make a difference Option "Phys" "usb-*/input0" # USB port independant Option "RelHWHEELMapTo" "Buttons 7 6" Option "RelWHEELMapTo" "Buttons 4 5" Option "Buttons" "21" Option "ButtonNumer" "21" Option "ZAxisMapping" "4 5" # Option "Emulate3Buttons" "false" EndSection Section "Device" Identifier "Radeon HD 4350" Driver "radeon" BusID "PCI:1:0:0" ##disabled in the second test Option "AccelMethod" "exa" # default shadowfb Option "DRI" # EndSection ##disabled in the second test Section "DRI" Mode 0666 EndSection # Section "Monitor" Identifier "L227W" Option "DPMS" HorizSync 30-83 VertRefresh 56-75 EndSection Section "Screen" Identifier "Default Screen" Device "Radeon HD 4350" Monitor "L227W" DefaultDepth 24 SubSection "Display" Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" "SendCoreEvents" EndSection
Does forcing any others modes work (the other 1680x1050 mode, 1024x768, 1280x1024, etc.)?
I set the display modes in the xorg.conf to 800x600 and 640x480 but same effect. Also I disabled the DRI section and restartet gdm and could see for few seconds gdm. any ideas? fixes patches? would be very cool, if i can use the raden asap :) here is the log: (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 31 22:26:24 2009 (==) Using config file: "/etc/X11/xorg.conf" (II) Module "ddc" already built-in (II) Module "i2c" already built-in XRANDR name: VGA-0 Connector: VGA CRT2: INTERNAL_KLDSCP_DAC2 DDC reg: 0x7e40 XRANDR name: DVI-0 Connector: DVI-I CRT1: INTERNAL_KLDSCP_DAC1 DFP1: INTERNAL_UNIPHY2 DDC reg: 0x7f10 Dac detection success finished output detect: 0 finished output detect: 1 finished all detect before xf86InitialConfiguration Dac detection success (II) Module "ramdac" already built-in Output UNIPHY2 transmitter setup success Blank CRTC 0 success Disable CRTC 0 success Disable CRTC memreq 0 success Blank CRTC 1 success Disable CRTC 1 success Disable CRTC memreq 1 success mc fb loc is 00ef00d0 Output CRT2 disable success Output UNIPHY2 transmitter setup success Blank CRTC 0 success Disable CRTC 0 success Disable CRTC memreq 0 success Blank CRTC 1 success Disable CRTC 1 success Disable CRTC memreq 1 success Output UNIPHY2 transmitter setup success Blank CRTC 0 success Disable CRTC 0 success Disable CRTC memreq 0 success Mode 1680x1050 - 1840 1080 9 freq: 119000000 best_freq: 119000000 best_feedback_div: 119 best_frac_feedback_div: 0 best_ref_div: 3 best_post_div: 9 Set CRTC 0 PLL success Set CRTC Timing success Set CRTC 0 Overscan success Not using RMX scaler 0 setup success Set CRTC 0 Source success crtc 0 YUV disable setup success Output UNIPHY2 transmitter setup success Output DIG1 encoder setup success Output DIG1 encoder setup success Output UNIPHY2 transmitter setup success Output UNIPHY2 transmitter setup success Output UNIPHY2 transmitter setup success Enable CRTC memreq 0 success Enable CRTC 0 success Unblank CRTC 0 success Output CRT2 disable success Blank CRTC 1 success Disable CRTC 1 success Disable CRTC memreq 1 success Output UNIPHY2 transmitter setup success Blank CRTC 0 success Disable CRTC 0 success Disable CRTC memreq 0 success Mode 1680x1050 - 1840 1080 9 freq: 119000000 best_freq: 119000000 best_feedback_div: 119 best_frac_feedback_div: 0 best_ref_div: 3 best_post_div: 9 Set CRTC 0 PLL success Set CRTC Timing success Set CRTC 0 Overscan success Not using RMX scaler 0 setup success Set CRTC 0 Source success crtc 0 YUV disable setup success Output UNIPHY2 transmitter setup success Output DIG1 encoder setup success Output DIG1 encoder setup success Output UNIPHY2 transmitter setup success Output UNIPHY2 transmitter setup success Output UNIPHY2 transmitter setup success Enable CRTC memreq 0 success Enable CRTC 0 success Unblank CRTC 0 success (EE) AIGLX error: dlopen of /usr/lib/dri/r600_dri.so failed (/usr/lib/dri/r600_dri.so: cannot open shared object file: No such file or directory) (EE) AIGLX: reverting to software rendering (EE) Configured Mouse: No device specified. (EE) PreInit returned NULL for "Configured Mouse" The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server Output UNIPHY2 transmitter setup success Blank CRTC 0 success Disable CRTC 0 success Disable CRTC memreq 0 success Blank CRTC 1 success Disable CRTC 1 success Disable CRTC memreq 1 success Enable CRTC memreq 0 success Enable CRTC 0 success Unblank CRTC 0 success AUDIT: Fri Jul 31 22:28:05 2009: 8991 X: client 4 rejected from local host (uid 0) AUDIT: Fri Jul 31 22:28:05 2009: 8991 X: client 4 rejected from local host (uid 0) AUDIT: Fri Jul 31 22:28:05 2009: 8991 X: client 4 rejected from local host (uid 0) AUDIT: Fri Jul 31 22:28:23 2009: 8991 X: client 4 rejected from local host (uid 0) AUDIT: Fri Jul 31 22:28:23 2009: 8991 X: client 4 rejected from local host (uid 0) AUDIT: Fri Jul 31 22:28:23 2009: 8991 X: client 4 rejected from local host (uid 0)
Please attach the full log. Does adding the following to your xorg.conf help? Section "Monitor" Identifier "DVI-0" Modeline "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync Option "PreferredMode" "1024x768_60.00" EndSection
Created attachment 28434 [details] Xorg log file
Hello again, Identifier "DVI-0" I switched to the name of my TFT and tried again but I get always the same error. If you need the gdm logfile I post it here, too.
OK it seems its a radeon bug and no xorg.conf failure. I tested with a Ubuntu 9.04: Normal Boot: I see the Boot Logo hear the bootsound (holy crapy....) but then black screen. Nothing happens. I tested if some tty are available and pressed ctrl+alt+f1...f7 and get a prompt. lsmod | grep radeon shows me that the radeon is active. Boot in graphic safe mode: no problems. I can login. lsmod | grep radeon doesnt show the radeon as active. workarounds? fixes?etc?
(In reply to comment #5) > Hello again, > > Identifier "DVI-0" > > I switched to the name of my TFT and tried again but I get always the same > error. > If you need the gdm logfile I post it here, too. > You didn't set the monitor section to for DVI-0: (II) RADEON(0): Output VGA-0 using monitor section L227W (**) RADEON(0): Option "PreferredMode" "1024x768_60.00" (II) RADEON(0): I2C bus "VGA-0" initialized. (II) RADEON(0): Output DVI-0 has no monitor section It's using the monitor section for VGA-0. You need to set the identifier for your monitor to DVI-0 as I said.
Ok I updated the radeon driver here is my xorg.conf: http://mypaste.ja-s.de/1953 I tested also without a xorg.conf, but also a blackscreen and only systembeep :/ The seconand port is a VGA port so I cant test the card on the other port. btw: xserver-xorg-core is also up2date (1.6.3.901-1)
Is this still an issue with KMS or a newer version of the driver?
Hi there, I am experiencing the same issues - but I am on x86_64 AMD Radeon HD7500m/HD8500m When booting up, after splash screen I hear the login prompt but do not see the login screen. I am able to see the screen if I close the lid, let it go to sleep then wake it up. I had many of the same errors, but following some of these instructions helped clear those errors up. Now I am almost error free, but still experiencing the same issue. http://askubuntu.com/questions/465243/how-to-use-fglrx-proprietary-driver-for-dual-ati-radeon-hd-5670-crossfirex-in-ub http://askubuntu.com/questions/94272/ati-driver-issue-fglrxinfo-returning-null-display-error-xorg-conf-file-looks-f/175677#175677 Hope this helps ================= fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 7800M Series OpenGL version string: 4.3.12798 Compatibility Profile Context 13.35.1005 ================= /etc/X11/xorg.conf ------------------ Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Files" ModulePath "/usr/lib/fglrx" ModulePath "/usr/lib/xorg/modules" ModulePath "/usr/lib/dri/" EndSection ============================== /var/log/Xorg.0.log ----------------- [ 12.926] X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 12.926] X Protocol Version 11, Revision 0 [ 12.926] Build Operating System: Linux 3.2.0-61-generic x86_64 Ubuntu [ 12.926] Current Operating System: Linux Ulster 3.13.0-36-generic #63-Ubuntu SMP Wed Sep 3 21:30:07 UTC 2014 x86_64 [ 12.926] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=8c084118-427f-4a4e-89f2-bb32977d993d ro persistent splash nomodeset [ 12.926] Build Date: 30 July 2014 12:21:54AM [ 12.926] xorg-server 2:1.15.1-0ubuntu2.1 (For technical support please see http://www.ubuntu.com/support) [ 12.926] Current version of pixman: 0.30.2 [ 12.926] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 12.926] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 12.927] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 28 00:47:48 2014 [ 12.927] (==) Using config file: "/etc/X11/xorg.conf" [ 12.927] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 12.928] (==) ServerLayout "aticonfig Layout" [ 12.928] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 12.928] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 12.928] (**) | |-->Device "aticonfig-Device[0]-0" [ 12.928] (==) Automatically adding devices [ 12.928] (==) Automatically enabling devices [ 12.928] (==) Automatically adding GPU devices [ 12.928] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 12.928] Entry deleted from font path. [ 12.928] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 12.928] Entry deleted from font path. [ 12.928] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 12.928] Entry deleted from font path. [ 12.928] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 12.928] Entry deleted from font path. [ 12.928] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 12.928] Entry deleted from font path. [ 12.928] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 12.928] (**) ModulePath set to "/usr/lib/fglrx,/usr/lib/xorg/modules,/usr/lib/dri/" [ 12.928] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 12.928] (II) Loader magic: 0x7f39ccf2dd40 [ 12.928] (II) Module ABI versions: [ 12.928] X.Org ANSI C Emulation: 0.4 [ 12.928] X.Org Video Driver: 15.0 [ 12.928] X.Org XInput driver : 20.0 [ 12.928] X.Org Server Extension : 8.0 [ 12.930] (--) PCI:*(0:1:0:0) 1002:6827:103c:1852 rev 0, Mem @ 0xb0000000/268435456, 0xc2000000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072 [ 12.930] Initializing built-in extension Generic Event Extension [ 12.930] Initializing built-in extension SHAPE [ 12.930] Initializing built-in extension MIT-SHM [ 12.930] Initializing built-in extension XInputExtension [ 12.930] Initializing built-in extension XTEST [ 12.930] Initializing built-in extension BIG-REQUESTS [ 12.930] Initializing built-in extension SYNC [ 12.931] Initializing built-in extension XKEYBOARD [ 12.931] Initializing built-in extension XC-MISC [ 12.931] Initializing built-in extension SECURITY [ 12.931] Initializing built-in extension XINERAMA [ 12.931] Initializing built-in extension XFIXES [ 12.931] Initializing built-in extension RENDER [ 12.931] Initializing built-in extension RANDR [ 12.931] Initializing built-in extension COMPOSITE [ 12.931] Initializing built-in extension DAMAGE [ 12.931] Initializing built-in extension MIT-SCREEN-SAVER [ 12.931] Initializing built-in extension DOUBLE-BUFFER [ 12.931] Initializing built-in extension RECORD [ 12.931] Initializing built-in extension DPMS [ 12.931] Initializing built-in extension Present [ 12.931] Initializing built-in extension DRI3 [ 12.931] Initializing built-in extension X-Resource [ 12.931] Initializing built-in extension XVideo [ 12.931] Initializing built-in extension XVideo-MotionCompensation [ 12.931] Initializing built-in extension SELinux [ 12.931] Initializing built-in extension XFree86-VidModeExtension [ 12.931] Initializing built-in extension XFree86-DGA [ 12.931] Initializing built-in extension XFree86-DRI [ 12.931] Initializing built-in extension DRI2 [ 12.931] (II) "glx" will be loaded by default. [ 12.931] (WW) "xmir" is not to be loaded by default. Skipping. [ 12.931] (II) LoadModule: "glx" [ 12.944] (II) Loading /usr/lib/fglrx/xorg/modules/extensions/libglx.so [ 12.944] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 12.944] compiled for 6.9.0, module version = 1.0.0 [ 12.945] Loading extension GLX [ 12.945] (II) LoadModule: "fglrx" [ 12.945] (II) Loading /usr/lib/fglrx/xorg/modules/drivers/fglrx_drv.so [ 12.984] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc." [ 12.984] compiled for 1.4.99.906, module version = 13.35.5 [ 12.984] Module class: X.Org Video Driver [ 12.984] (II) Loading sub module "fglrxdrm" [ 12.984] (II) LoadModule: "fglrxdrm" [ 12.985] (II) Loading /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so [ 12.986] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 12.986] compiled for 1.4.99.906, module version = 13.35.5 [ 12.986] (II) AMD Proprietary Linux Driver Version Identifier:13.35.5 [ 12.986] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.35.1005 [ 12.986] (II) AMD Proprietary Linux Driver Build Date: Mar 12 2014 10:32:23 [ 12.986] (++) using VT number 7 [ 12.989] (WW) Falling back to old probe method for fglrx [ 13.001] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default [ 13.014] ukiDynamicMajor: found major device number 250 [ 13.014] ukiDynamicMajor: found major device number 250 [ 13.014] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 13.014] ukiOpenDevice: node name is /dev/ati/card0 [ 13.014] ukiOpenDevice: open result is 9, (OK) [ 13.592] ukiOpenByBusid: ukiOpenMinor returns 9 [ 13.592] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 13.596] (--) Chipset Supported AMD Graphics Processor (0x6827) found [ 13.596] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 13.597] (II) fglrx(0): pEnt->device->identifier=0x7f39cd19f3d0 [ 13.597] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin [ 13.597] (II) Loading sub module "vgahw" [ 13.597] (II) LoadModule: "vgahw" [ 13.600] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 13.600] (II) Module vgahw: vendor="X.Org Foundation" [ 13.600] compiled for 1.15.1, module version = 0.1.0 [ 13.600] ABI class: X.Org Video Driver, version 15.0 [ 13.601] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 13.601] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 13.601] (==) fglrx(0): Default visual is TrueColor [ 13.601] (**) fglrx(0): Option "DPMS" "true" [ 13.601] (==) fglrx(0): RGB weight 888 [ 13.601] (II) fglrx(0): Using 8 bits per RGB [ 13.601] (==) fglrx(0): Buffer Tiling is ON [ 13.601] (II) Loading sub module "fglrxdrm" [ 13.601] (II) LoadModule: "fglrxdrm" [ 13.602] (II) Loading /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so [ 13.602] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 13.602] compiled for 1.4.99.906, module version = 13.35.5 [ 13.614] ukiDynamicMajor: found major device number 250 [ 13.615] ukiDynamicMajor: found major device number 250 [ 13.615] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 13.615] ukiOpenDevice: node name is /dev/ati/card0 [ 13.615] ukiOpenDevice: open result is 11, (OK) [ 13.615] ukiOpenByBusid: ukiOpenMinor returns 11 [ 13.615] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 13.615] (**) fglrx(0): NoAccel = NO [ 13.615] (**) fglrx(0): AMD 2D Acceleration Architecture enabled [ 13.615] (--) fglrx(0): Chipset: "AMD Radeon HD 7800M Series " (Chipset = 0x6827) [ 13.615] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1852) [ 13.615] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD [ 13.615] (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000 [ 13.615] (--) fglrx(0): MMIO registers at 0xc2000000 [ 13.615] (--) fglrx(0): I/O port at 0x00004000 [ 13.615] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 13.616] (II) fglrx(0): ATIF platform detected [ 13.617] (II) fglrx(0): Battery is used [ 13.617] (II) fglrx(0): Primary V_BIOS segment is: 0xc000 [ 13.690] (II) Loading sub module "vbe" [ 13.691] (II) LoadModule: "vbe" [ 13.691] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 13.691] (II) Module vbe: vendor="X.Org Foundation" [ 13.691] compiled for 1.15.1, module version = 1.1.0 [ 13.691] ABI class: X.Org Video Driver, version 15.0 [ 13.692] (II) fglrx(0): VESA BIOS detected [ 13.692] (II) fglrx(0): VESA VBE Version 3.0 [ 13.692] (II) fglrx(0): VESA VBE Total Mem: 16384 kB [ 13.692] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS [ 13.692] (II) fglrx(0): VESA VBE OEM Software Rev: 15.21 [ 13.692] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc. [ 13.692] (II) fglrx(0): VESA VBE OEM Product: HEATHROW [ 13.692] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 [ 13.692] (II) fglrx(0): AMD Video BIOS revision 9 or later detected [ 13.692] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5 [ 13.692] (II) fglrx(0): PCIE card detected [ 13.692] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 13.692] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 13.692] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000) [ 13.692] (II) fglrx(0): RandR 1.2 support is enabled! [ 13.692] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 13.692] (II) Loading sub module "fb" [ 13.692] (II) LoadModule: "fb" [ 13.693] (II) Loading /usr/lib/xorg/modules/libfb.so [ 13.693] (II) Module fb: vendor="X.Org Foundation" [ 13.693] compiled for 1.15.1, module version = 1.0.0 [ 13.693] ABI class: X.Org ANSI C Emulation, version 0.4 [ 13.693] (II) fglrx(0): EDID Management option: EDID Management is enabled [ 13.693] (II) Loading sub module "ddc" [ 13.693] (II) LoadModule: "ddc" [ 13.693] (II) Module "ddc" already built-in [ 13.787] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0 [ 13.787] (II) fglrx(0): Output DFP1 has no monitor section [ 13.787] (II) fglrx(0): Output DFP2 has no monitor section [ 13.787] (II) fglrx(0): Output DFP3 has no monitor section [ 13.787] (II) fglrx(0): Output DFP4 has no monitor section [ 13.787] (II) fglrx(0): Output DFP5 has no monitor section [ 13.787] (II) fglrx(0): Output DFP6 has no monitor section [ 13.787] (II) fglrx(0): Output DFP7 has no monitor section [ 13.788] (II) fglrx(0): Output DFP8 has no monitor section [ 13.788] (II) fglrx(0): Output DFP9 has no monitor section [ 13.788] (II) Loading sub module "ddc" [ 13.788] (II) LoadModule: "ddc" [ 13.788] (II) Module "ddc" already built-in [ 13.788] (II) fglrx(0): Connected Display0: LVDS [ 13.788] (II) fglrx(0): Display0 EDID data --------------------------- [ 13.788] (II) fglrx(0): Manufacturer: LGD Model: 2c4 Serial#: 0 [ 13.788] (II) fglrx(0): Year: 2011 Week: 0 [ 13.788] (II) fglrx(0): EDID Version: 1.4 [ 13.788] (II) fglrx(0): Digital Display Input [ 13.788] (II) fglrx(0): 6 bits per channel [ 13.788] (II) fglrx(0): Digital interface is DisplayPort [ 13.788] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 21 [ 13.788] (II) fglrx(0): Gamma: 2.20 [ 13.788] (II) fglrx(0): No DPMS capabilities specified [ 13.788] (II) fglrx(0): Supported color encodings: RGB 4:4:4 [ 13.788] (II) fglrx(0): First detailed timing is preferred mode [ 13.788] (II) fglrx(0): Preferred mode is native pixel format and refresh rate [ 13.788] (II) fglrx(0): redX: 0.642 redY: 0.345 greenX: 0.339 greenY: 0.620 [ 13.788] (II) fglrx(0): blueX: 0.148 blueY: 0.062 whiteX: 0.313 whiteY: 0.329 [ 13.788] (II) fglrx(0): Manufacturer's mask: 0 [ 13.788] (II) fglrx(0): Supported detailed timing: [ 13.788] (II) fglrx(0): clock: 148.5 MHz Image Size: 382 x 215 mm [ 13.788] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 13.788] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 13.788] (II) fglrx(0): Supported detailed timing: [ 13.788] (II) fglrx(0): clock: 392.2 MHz Image Size: 382 x 215 mm [ 13.788] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 13.788] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1964 v_border: 0 [ 13.788] (II) fglrx(0): Supported detailed timing: [ 13.788] (II) fglrx(0): clock: 396.4 MHz Image Size: 382 x 215 mm [ 13.788] (II) fglrx(0): h_active: 1920 h_sync: 1940 h_sync_end 1960 h_blank_end 2080 h_border: 0 [ 13.788] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1588 v_border: 0 [ 13.788] (II) fglrx(0): LP173WF2-TPB3 [ 13.788] (II) fglrx(0): EDID (in hex): [ 13.788] (II) fglrx(0): 00ffffffffffff0030e4c40200000000 [ 13.788] (II) fglrx(0): 0015010495261578025f35a458569e26 [ 13.788] (II) fglrx(0): 0f505400000001010101010101010101 [ 13.788] (II) fglrx(0): 010101010101023a801871382d40582c [ 13.788] (II) fglrx(0): 45007ed710000019319980a070387443 [ 13.788] (II) fglrx(0): 302035007ed710000019d39a80a07038 [ 13.788] (II) fglrx(0): fc41141435007ed710000019000000fe [ 13.788] (II) fglrx(0): 004c503137335746322d545042330047 [ 13.788] (II) fglrx(0): End of Display0 EDID data -------------------- [ 13.788] (II) fglrx(0): Dynamic Surface Resizing Enabled [ 13.790] (II) fglrx(0): EDID for output LVDS [ 13.790] (II) fglrx(0): Manufacturer: LGD Model: 2c4 Serial#: 0 [ 13.790] (II) fglrx(0): Year: 2011 Week: 0 [ 13.790] (II) fglrx(0): EDID Version: 1.4 [ 13.790] (II) fglrx(0): Digital Display Input [ 13.790] (II) fglrx(0): 6 bits per channel [ 13.790] (II) fglrx(0): Digital interface is DisplayPort [ 13.790] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 21 [ 13.790] (II) fglrx(0): Gamma: 2.20 [ 13.790] (II) fglrx(0): No DPMS capabilities specified [ 13.790] (II) fglrx(0): Supported color encodings: RGB 4:4:4 [ 13.790] (II) fglrx(0): First detailed timing is preferred mode [ 13.790] (II) fglrx(0): Preferred mode is native pixel format and refresh rate [ 13.790] (II) fglrx(0): redX: 0.642 redY: 0.345 greenX: 0.339 greenY: 0.620 [ 13.790] (II) fglrx(0): blueX: 0.148 blueY: 0.062 whiteX: 0.313 whiteY: 0.329 [ 13.790] (II) fglrx(0): Manufacturer's mask: 0 [ 13.790] (II) fglrx(0): Supported detailed timing: [ 13.790] (II) fglrx(0): clock: 148.5 MHz Image Size: 382 x 215 mm [ 13.790] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 13.790] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 13.790] (II) fglrx(0): Supported detailed timing: [ 13.790] (II) fglrx(0): clock: 392.2 MHz Image Size: 382 x 215 mm [ 13.790] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 13.790] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1964 v_border: 0 [ 13.790] (II) fglrx(0): Supported detailed timing: [ 13.790] (II) fglrx(0): clock: 396.4 MHz Image Size: 382 x 215 mm [ 13.790] (II) fglrx(0): h_active: 1920 h_sync: 1940 h_sync_end 1960 h_blank_end 2080 h_border: 0 [ 13.790] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1588 v_border: 0 [ 13.790] (II) fglrx(0): LP173WF2-TPB3 [ 13.790] (II) fglrx(0): EDID (in hex): [ 13.790] (II) fglrx(0): 00ffffffffffff0030e4c40200000000 [ 13.790] (II) fglrx(0): 0015010495261578025f35a458569e26 [ 13.790] (II) fglrx(0): 0f505400000001010101010101010101 [ 13.790] (II) fglrx(0): 010101010101023a801871382d40582c [ 13.790] (II) fglrx(0): 45007ed710000019319980a070387443 [ 13.790] (II) fglrx(0): 302035007ed710000019d39a80a07038 [ 13.790] (II) fglrx(0): fc41141435007ed710000019000000fe [ 13.790] (II) fglrx(0): 004c503137335746322d545042330047 [ 13.791] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 13.791] (II) fglrx(0): Printing DDC gathered Modelines: [ 13.791] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 13.791] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Printing probed modes for output LVDS [ 13.791] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 13.791] (II) fglrx(0): Modeline "1920x1080"x120.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "1920x1080"x96.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1680x1050"x60.0 148.50 1680 2008 2052 2200 1050 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1400x1050"x120.0 396.35 1400 1940 1960 2080 1050 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "1400x1050"x96.0 392.17 1400 1968 2000 2080 1050 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1400x1050"x60.0 148.50 1400 2008 2052 2200 1050 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1600x900"x60.0 148.50 1600 2008 2052 2200 900 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x1024"x120.0 396.35 1280 1940 1960 2080 1024 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x1024"x96.0 392.17 1280 1968 2000 2080 1024 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x1024"x60.0 148.50 1280 2008 2052 2200 1024 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1440x900"x120.0 396.35 1440 1940 1960 2080 900 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "1440x900"x96.0 392.17 1440 1968 2000 2080 900 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1440x900"x60.0 148.50 1440 2008 2052 2200 900 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x960"x120.0 396.35 1280 1940 1960 2080 960 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x960"x96.0 392.17 1280 1968 2000 2080 960 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x960"x60.0 148.50 1280 2008 2052 2200 960 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x768"x120.0 396.35 1280 1940 1960 2080 768 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x768"x96.0 392.17 1280 1968 2000 2080 768 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x768"x60.0 148.50 1280 2008 2052 2200 768 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x720"x120.0 396.35 1280 1940 1960 2080 720 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x720"x96.0 392.17 1280 1968 2000 2080 720 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1280x720"x60.0 148.50 1280 2008 2052 2200 720 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1024x768"x120.0 396.35 1024 1940 1960 2080 768 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "1024x768"x96.0 392.17 1024 1968 2000 2080 768 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1024x768"x60.0 148.50 1024 2008 2052 2200 768 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1024x600"x120.0 396.35 1024 1940 1960 2080 600 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "1024x600"x96.0 392.17 1024 1968 2000 2080 600 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "1024x600"x60.0 148.50 1024 2008 2052 2200 600 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "800x600"x120.0 396.35 800 1940 1960 2080 600 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "800x600"x96.0 392.17 800 1968 2000 2080 600 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "800x600"x60.0 148.50 800 2008 2052 2200 600 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "800x480"x120.0 396.35 800 1940 1960 2080 480 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "800x480"x96.0 392.17 800 1968 2000 2080 480 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "800x480"x60.0 148.50 800 2008 2052 2200 480 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "640x480"x120.0 396.35 640 1940 1960 2080 480 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 13.791] (II) fglrx(0): Modeline "640x480"x96.0 392.17 640 1968 2000 2080 480 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 13.791] (II) fglrx(0): Modeline "640x480"x60.0 148.50 640 2008 2052 2200 480 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 13.791] (II) fglrx(0): EDID for output DFP1 [ 13.791] (II) fglrx(0): EDID for output DFP2 [ 13.791] (II) fglrx(0): EDID for output DFP3 [ 13.792] (II) fglrx(0): EDID for output DFP4 [ 13.792] (II) fglrx(0): EDID for output DFP5 [ 13.792] (II) fglrx(0): EDID for output DFP6 [ 13.792] (II) fglrx(0): EDID for output DFP7 [ 13.792] (II) fglrx(0): EDID for output DFP8 [ 13.792] (II) fglrx(0): EDID for output DFP9 [ 13.792] (II) fglrx(0): Output LVDS connected [ 13.792] (II) fglrx(0): Output DFP1 disconnected [ 13.792] (II) fglrx(0): Output DFP2 disconnected [ 13.792] (II) fglrx(0): Output DFP3 disconnected [ 13.792] (II) fglrx(0): Output DFP4 disconnected [ 13.792] (II) fglrx(0): Output DFP5 disconnected [ 13.792] (II) fglrx(0): Output DFP6 disconnected [ 13.792] (II) fglrx(0): Output DFP7 disconnected [ 13.792] (II) fglrx(0): Output DFP8 disconnected [ 13.792] (II) fglrx(0): Output DFP9 disconnected [ 13.792] (II) fglrx(0): Using exact sizes for initial modes [ 13.792] (II) fglrx(0): Output LVDS using initial mode 1920x1080 [ 13.792] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 13.792] (II) fglrx(0): Display dimensions: (380, 210) mm [ 13.792] (II) fglrx(0): DPI set to (128, 130) [ 13.792] (II) fglrx(0): Eyefinity capable adapter detected. [ 13.792] (II) fglrx(0): Adapter AMD Radeon HD 7800M Series has 6 configurable heads and 1 displays connected. [ 13.792] (==) fglrx(0): PseudoColor visuals disabled [ 13.792] (II) Loading sub module "ramdac" [ 13.792] (II) LoadModule: "ramdac" [ 13.792] (II) Module "ramdac" already built-in [ 13.792] (==) fglrx(0): NoDRI = NO [ 13.792] (==) fglrx(0): Capabilities: 0x00000000 [ 13.792] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 13.792] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 13.792] (==) fglrx(0): UseFastTLS=0 [ 13.792] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled [ 13.792] (--) Depth 24 pixmap format is 32 bpp [ 13.805] Loading extension ATIFGLRXDRI [ 13.806] (II) fglrx(0): doing swlDriScreenInit [ 13.806] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 13.806] ukiDynamicMajor: found major device number 250 [ 13.806] ukiDynamicMajor: found major device number 250 [ 13.806] ukiDynamicMajor: found major device number 250 [ 13.806] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 13.806] ukiOpenDevice: node name is /dev/ati/card0 [ 13.806] ukiOpenDevice: open result is 12, (OK) [ 13.806] ukiOpenByBusid: ukiOpenMinor returns 12 [ 13.806] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 13.806] (II) fglrx(0): [uki] DRM interface version 1.0 [ 13.806] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" [ 13.806] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 13.806] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f39ccaf8000 [ 13.806] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 13.806] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 13.806] (II) fglrx(0): swlDriScreenInit done [ 13.806] (II) fglrx(0): Kernel Module Version Information: [ 13.806] (II) fglrx(0): Name: fglrx [ 13.806] (II) fglrx(0): Version: 13.35.5 [ 13.806] (II) fglrx(0): Date: Mar 12 2014 [ 13.806] (II) fglrx(0): Desc: AMD FireGL DRM kernel module [ 13.806] (II) fglrx(0): Kernel Module version matches driver. [ 13.806] (II) fglrx(0): Kernel Module Build Time Information: [ 13.806] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.13.0-36-generic [ 13.806] (II) fglrx(0): Build-Kernel MODVERSIONS: yes [ 13.806] (II) fglrx(0): Build-Kernel __SMP__: yes [ 13.806] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 13.806] (II) fglrx(0): [uki] register handle = 0x00004000 [ 13.807] (II) fglrx(0): DRI initialization successfull [ 13.807] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010e0000 [ 13.808] (==) fglrx(0): Backing store enabled [ 13.808] Loading extension FGLRXEXTENSION [ 13.808] (**) fglrx(0): DPMS enabled [ 13.808] (II) fglrx(0): Initialized in-driver Xinerama extension [ 13.808] (**) fglrx(0): Textured Video is enabled. [ 13.808] (II) LoadModule: "glesx" [ 13.809] (II) Loading /usr/lib/fglrx/xorg/modules/glesx.so [ 13.809] (II) Module glesx: vendor="X.Org Foundation" [ 13.809] compiled for 1.4.99.906, module version = 1.0.0 [ 13.809] Loading extension GLESX [ 13.809] (II) fglrx(0): GLESX enableFlags = 8784 [ 13.809] (II) fglrx(0): GLESX is enabled [ 13.809] (II) LoadModule: "amdxmm" [ 13.810] (II) Loading /usr/lib/fglrx/xorg/modules/amdxmm.so [ 13.810] (II) Module amdxmm: vendor="X.Org Foundation" [ 13.810] compiled for 1.4.99.906, module version = 2.0.0 [ 13.833] Loading extension AMDXVOPL [ 13.833] Loading extension AMDXVBA [ 13.834] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): [ 13.838] (II) fglrx(0): Enable composite support successfully [ 13.838] (WW) fglrx(0): Option "VendorName" is not used [ 13.838] (WW) fglrx(0): Option "ModelName" is not used [ 13.838] (II) fglrx(0): X context handle = 0x1 [ 13.838] (II) fglrx(0): [DRI] installation complete [ 13.838] (==) fglrx(0): Silken mouse enabled [ 13.838] (==) fglrx(0): Using HW cursor of display infrastructure! [ 13.839] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 13.839] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel' [ 15.452] (--) RandR disabled [ 15.461] (II) SELinux: Disabled on system [ 15.462] ukiDynamicMajor: found major device number 250 [ 15.462] ukiDynamicMajor: found major device number 250 [ 15.462] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 15.462] ukiOpenDevice: node name is /dev/ati/card0 [ 15.462] ukiOpenDevice: open result is 13, (OK) [ 15.462] ukiOpenByBusid: ukiOpenMinor returns 13 [ 15.462] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 15.487] ukiDynamicMajor: found major device number 250 [ 15.487] ukiDynamicMajor: found major device number 250 [ 15.487] ukiDynamicMajor: found major device number 250 [ 15.487] ukiOpenDevice: node name is /dev/ati/card0 [ 15.487] ukiOpenDevice: open result is 14, (OK) [ 15.487] ukiGetBusid returned 'PCI:1:0:0' [ 15.487] ukiOpenDevice: node name is /dev/ati/card1 [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: Open failed [ 15.487] ukiOpenDevice: node name is /dev/ati/card2 [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: Open failed [ 15.487] ukiOpenDevice: node name is /dev/ati/card3 [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: Open failed [ 15.487] ukiOpenDevice: node name is /dev/ati/card4 [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: Open failed [ 15.487] ukiOpenDevice: node name is /dev/ati/card5 [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: Open failed [ 15.487] ukiOpenDevice: node name is /dev/ati/card6 [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: open result is -1, (No such device) [ 15.487] ukiOpenDevice: Open failed [ 15.487] ukiOpenDevice: node name is /dev/ati/card7 [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: Open failed [ 15.488] ukiOpenDevice: node name is /dev/ati/card8 [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: Open failed [ 15.488] ukiOpenDevice: node name is /dev/ati/card9 [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: Open failed [ 15.488] ukiOpenDevice: node name is /dev/ati/card10 [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: Open failed [ 15.488] ukiOpenDevice: node name is /dev/ati/card11 [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: Open failed [ 15.488] ukiOpenDevice: node name is /dev/ati/card12 [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: Open failed [ 15.488] ukiOpenDevice: node name is /dev/ati/card13 [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: Open failed [ 15.488] ukiOpenDevice: node name is /dev/ati/card14 [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: Open failed [ 15.488] ukiOpenDevice: node name is /dev/ati/card15 [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: open result is -1, (No such device) [ 15.488] ukiOpenDevice: Open failed [ 15.488] ukiDynamicMajor: found major device number 250 [ 15.488] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 15.488] ukiOpenDevice: node name is /dev/ati/card0 [ 15.488] ukiOpenDevice: open result is 14, (OK) [ 15.488] ukiOpenByBusid: ukiOpenMinor returns 14 [ 15.488] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 15.558] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0 [ 15.559] ukiDynamicMajor: found major device number 250 [ 15.559] ukiDynamicMajor: found major device number 250 [ 15.559] ukiDynamicMajor: found major device number 250 [ 15.559] ukiOpenDevice: node name is /dev/ati/card0 [ 15.559] ukiOpenDevice: open result is 15, (OK) [ 15.559] ukiGetBusid returned 'PCI:1:0:0' [ 15.559] ukiOpenDevice: node name is /dev/ati/card1 [ 15.559] ukiOpenDevice: open result is -1, (No such device) [ 15.559] ukiOpenDevice: open result is -1, (No such device) [ 15.559] ukiOpenDevice: Open failed [ 15.559] ukiOpenDevice: node name is /dev/ati/card2 [ 15.559] ukiOpenDevice: open result is -1, (No such device) [ 15.559] ukiOpenDevice: open result is -1, (No such device) [ 15.559] ukiOpenDevice: Open failed [ 15.559] ukiOpenDevice: node name is /dev/ati/card3 [ 15.559] ukiOpenDevice: open result is -1, (No such device) [ 15.559] ukiOpenDevice: open result is -1, (No such device) [ 15.559] ukiOpenDevice: Open failed [ 15.559] ukiOpenDevice: node name is /dev/ati/card4 [ 15.559] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card5 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card6 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card7 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card8 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card9 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card10 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card11 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card12 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card13 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card14 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.560] ukiOpenDevice: Open failed [ 15.560] ukiOpenDevice: node name is /dev/ati/card15 [ 15.560] ukiOpenDevice: open result is -1, (No such device) [ 15.561] ukiOpenDevice: open result is -1, (No such device) [ 15.561] ukiOpenDevice: Open failed [ 15.561] ukiDynamicMajor: found major device number 250 [ 15.561] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 15.561] ukiOpenDevice: node name is /dev/ati/card0 [ 15.561] ukiOpenDevice: open result is 15, (OK) [ 15.561] ukiOpenByBusid: ukiOpenMinor returns 15 [ 15.561] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 15.583] (II) fglrx(0): Setting screen physical size to 508 x 285 [ 15.595] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 15.599] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 15.599] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 15.599] (II) LoadModule: "evdev" [ 15.600] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 15.601] (II) Module evdev: vendor="X.Org Foundation" [ 15.601] compiled for 1.15.0, module version = 2.8.2 [ 15.601] Module class: X.Org XInput Driver [ 15.601] ABI class: X.Org XInput driver, version 20.0 [ 15.601] (II) Using input driver 'evdev' for 'Power Button' [ 15.601] (**) Power Button: always reports core events [ 15.601] (**) evdev: Power Button: Device: "/dev/input/event2" [ 15.601] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 15.601] (--) evdev: Power Button: Found keys [ 15.601] (II) evdev: Power Button: Configuring as keyboard [ 15.601] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 15.601] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 15.601] (**) Option "xkb_rules" "evdev" [ 15.601] (**) Option "xkb_model" "pc105" [ 15.601] (**) Option "xkb_layout" "us" [ 15.602] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 15.602] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 15.602] (II) Using input driver 'evdev' for 'Video Bus' [ 15.602] (**) Video Bus: always reports core events [ 15.602] (**) evdev: Video Bus: Device: "/dev/input/event7" [ 15.602] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 15.602] (--) evdev: Video Bus: Found keys [ 15.602] (II) evdev: Video Bus: Configuring as keyboard [ 15.602] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input8/event7" [ 15.602] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 15.602] (**) Option "xkb_rules" "evdev" [ 15.602] (**) Option "xkb_model" "pc105" [ 15.602] (**) Option "xkb_layout" "us" [ 15.603] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 15.603] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 15.603] (II) Using input driver 'evdev' for 'Power Button' [ 15.603] (**) Power Button: always reports core events [ 15.603] (**) evdev: Power Button: Device: "/dev/input/event1" [ 15.603] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 15.603] (--) evdev: Power Button: Found keys [ 15.603] (II) evdev: Power Button: Configuring as keyboard [ 15.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 15.603] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 15.603] (**) Option "xkb_rules" "evdev" [ 15.603] (**) Option "xkb_model" "pc105" [ 15.603] (**) Option "xkb_layout" "us" [ 15.604] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 15.604] (II) No input driver specified, ignoring this device. [ 15.604] (II) This device may have been added with another device file. [ 15.604] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12) [ 15.604] (II) No input driver specified, ignoring this device. [ 15.604] (II) This device may have been added with another device file. [ 15.604] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event11) [ 15.604] (II) No input driver specified, ignoring this device. [ 15.605] (II) This device may have been added with another device file. [ 15.605] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event10) [ 15.605] (II) No input driver specified, ignoring this device. [ 15.605] (II) This device may have been added with another device file. [ 15.605] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8) [ 15.605] (II) No input driver specified, ignoring this device. [ 15.605] (II) This device may have been added with another device file. [ 15.605] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9) [ 15.606] (II) No input driver specified, ignoring this device. [ 15.606] (II) This device may have been added with another device file. [ 15.606] (II) config/udev: Adding input device Standard Microsystems Corp. HP Wireless Audio Adapter (/dev/input/event5) [ 15.606] (**) Standard Microsystems Corp. HP Wireless Audio Adapter: Applying InputClass "evdev keyboard catchall" [ 15.606] (II) Using input driver 'evdev' for 'Standard Microsystems Corp. HP Wireless Audio Adapter' [ 15.606] (**) Standard Microsystems Corp. HP Wireless Audio Adapter: always reports core events [ 15.606] (**) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: Device: "/dev/input/event5" [ 15.606] (--) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: Vendor 0x424 Product 0xb832 [ 15.606] (--) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: Found 1 mouse buttons [ 15.606] (--) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: Found absolute axes [ 15.606] (II) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: Forcing absolute x/y axes to exist. [ 15.606] (--) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: Found keys [ 15.606] (II) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: Forcing relative x/y axes to exist. [ 15.606] (II) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: Configuring as mouse [ 15.606] (II) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: Configuring as keyboard [ 15.606] (**) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: YAxisMapping: buttons 4 and 5 [ 15.606] (**) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 15.606] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.3/input/input6/event5" [ 15.606] (II) XINPUT: Adding extended input device "Standard Microsystems Corp. HP Wireless Audio Adapter" (type: KEYBOARD, id 9) [ 15.606] (**) Option "xkb_rules" "evdev" [ 15.606] (**) Option "xkb_model" "pc105" [ 15.606] (**) Option "xkb_layout" "us" [ 15.607] (II) evdev: Standard Microsystems Corp. HP Wireless Audio Adapter: initialized for absolute axes. [ 15.607] (**) Standard Microsystems Corp. HP Wireless Audio Adapter: (accel) keeping acceleration scheme 1 [ 15.607] (**) Standard Microsystems Corp. HP Wireless Audio Adapter: (accel) acceleration profile 0 [ 15.607] (**) Standard Microsystems Corp. HP Wireless Audio Adapter: (accel) acceleration factor: 2.000 [ 15.607] (**) Standard Microsystems Corp. HP Wireless Audio Adapter: (accel) acceleration threshold: 4 [ 15.608] (II) config/udev: Adding input device HP TrueVision HD (/dev/input/event13) [ 15.608] (**) HP TrueVision HD: Applying InputClass "evdev keyboard catchall" [ 15.608] (II) Using input driver 'evdev' for 'HP TrueVision HD' [ 15.608] (**) HP TrueVision HD: always reports core events [ 15.608] (**) evdev: HP TrueVision HD: Device: "/dev/input/event13" [ 15.608] (--) evdev: HP TrueVision HD: Vendor 0x10f1 Product 0x1a37 [ 15.608] (--) evdev: HP TrueVision HD: Found keys [ 15.608] (II) evdev: HP TrueVision HD: Configuring as keyboard [ 15.608] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input14/event13" [ 15.608] (II) XINPUT: Adding extended input device "HP TrueVision HD" (type: KEYBOARD, id 10) [ 15.608] (**) Option "xkb_rules" "evdev" [ 15.608] (**) Option "xkb_model" "pc105" [ 15.608] (**) Option "xkb_layout" "us" [ 15.609] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 15.609] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 15.609] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 15.609] (**) AT Translated Set 2 keyboard: always reports core events [ 15.609] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 15.609] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 15.609] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 15.609] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 15.609] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 15.609] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11) [ 15.609] (**) Option "xkb_rules" "evdev" [ 15.609] (**) Option "xkb_model" "pc105" [ 15.609] (**) Option "xkb_layout" "us" [ 15.610] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4) [ 15.610] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 15.610] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 15.610] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 15.610] (II) LoadModule: "synaptics" [ 15.610] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 15.610] (II) Module synaptics: vendor="X.Org Foundation" [ 15.610] compiled for 1.15.0, module version = 1.7.4 [ 15.610] Module class: X.Org XInput Driver [ 15.610] ABI class: X.Org XInput driver, version 20.0 [ 15.610] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 15.610] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 15.611] (**) Option "Device" "/dev/input/event4" [ 15.636] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property [ 15.636] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5662 (res 42) [ 15.636] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4708 (res 58) [ 15.636] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 15.636] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 15.636] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple [ 15.636] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 15.636] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" [ 15.636] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 15.636] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 15.648] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4" [ 15.648] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12) [ 15.648] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 15.648] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 15.648] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038 [ 15.648] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 15.649] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 15.649] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 15.649] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 15.649] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 15.649] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 15.649] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 15.650] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event14) [ 15.650] (II) No input driver specified, ignoring this device. [ 15.650] (II) This device may have been added with another device file. [ 15.650] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0) [ 15.650] (II) No input driver specified, ignoring this device. [ 15.650] (II) This device may have been added with another device file. [ 15.653] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event15) [ 15.653] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 15.653] (II) Using input driver 'evdev' for 'HP WMI hotkeys' [ 15.653] (**) HP WMI hotkeys: always reports core events [ 15.653] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event15" [ 15.653] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0 [ 15.653] (--) evdev: HP WMI hotkeys: Found keys [ 15.653] (II) evdev: HP WMI hotkeys: Configuring as keyboard [ 15.653] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event15" [ 15.653] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13) [ 15.653] (**) Option "xkb_rules" "evdev" [ 15.653] (**) Option "xkb_model" "pc105" [ 15.653] (**) Option "xkb_layout" "us" [ 15.654] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event6) [ 15.654] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall" [ 15.654] (II) Using input driver 'evdev' for 'HP Wireless hotkeys' [ 15.654] (**) HP Wireless hotkeys: always reports core events [ 15.654] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event6" [ 15.654] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0 [ 15.654] (--) evdev: HP Wireless hotkeys: Found keys [ 15.654] (II) evdev: HP Wireless hotkeys: Configuring as keyboard [ 15.654] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6" [ 15.654] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 14) [ 15.654] (**) Option "xkb_rules" "evdev" [ 15.654] (**) Option "xkb_model" "pc105" [ 15.654] (**) Option "xkb_layout" "us" [ 15.660] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 16.513] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 16.513] (II) fglrx(0): Printing DDC gathered Modelines: [ 16.513] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 16.513] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 16.513] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 16.893] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 16.893] (II) fglrx(0): Printing DDC gathered Modelines: [ 16.893] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 16.893] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 16.893] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 21.271] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 21.271] (II) fglrx(0): Printing DDC gathered Modelines: [ 21.271] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 21.271] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 21.271] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 21.585] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 21.585] (II) fglrx(0): Printing DDC gathered Modelines: [ 21.585] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 21.585] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 21.585] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 21.600] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 21.956] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 21.956] (II) fglrx(0): Printing DDC gathered Modelines: [ 21.956] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 21.956] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 21.956] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 22.071] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 22.102] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 22.124] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 22.124] (II) fglrx(0): Printing DDC gathered Modelines: [ 22.124] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 22.124] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 22.124] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 22.401] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 22.401] (II) fglrx(0): Printing DDC gathered Modelines: [ 22.401] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 22.401] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 22.401] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 24.077] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm [ 36.052] (II) fglrx(0): Lid Close Received [ 36.067] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 36.067] (II) fglrx(0): Printing DDC gathered Modelines: [ 36.067] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 36.067] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 36.067] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 36.092] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 36.092] (II) fglrx(0): Printing DDC gathered Modelines: [ 36.092] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 36.092] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 36.092] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 37.812] (II) AIGLX: Suspending AIGLX clients for VT switch [ 37.813] (II) fglrx(0): Backup framebuffer data. [ 37.880] (II) fglrx(0): Backup complete. [ 39.551] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 45.896] (II) AIGLX: Resuming AIGLX clients after VT switch [ 45.899] (II) fglrx(0): Restore framebuffer data. [ 45.959] (II) fglrx(0): Restore complete. [ 48.516] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 48.516] (II) fglrx(0): Printing DDC gathered Modelines: [ 48.516] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 48.516] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 48.516] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 48.527] (II) fglrx(0): Lid Open Received [ 48.527] (II) fglrx(0): System Power Source: AC [ 48.537] (II) fglrx(0): Lid Open Received [ 48.566] [dix] couldn't enable device 12 [ 48.585] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 48.587] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 48.587] (II) fglrx(0): Printing DDC gathered Modelines: [ 48.587] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 48.587] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 48.587] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e) [ 48.591] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 48.596] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 48.603] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 48.607] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 48.613] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 48.617] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 496.910] (II) fglrx(0): EDID vendor "LGD", prod id 708 [ 496.910] (II) fglrx(0): Printing DDC gathered Modelines: [ 496.910] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz eP) [ 496.910] (II) fglrx(0): Modeline "1920x1080"x0.0 392.17 1920 1968 2000 2080 1080 1083 1088 1964 -hsync -vsync (188.5 kHz e) [ 496.911] (II) fglrx(0): Modeline "1920x1080"x0.0 396.35 1920 1940 1960 2080 1080 1083 1088 1588 -hsync -vsync (190.6 kHz e)
(In reply to comment #10) > I am experiencing the same issues You're using the fglrx / Catalyst drivers, but this bug report is about the open source radeon drivers.
moepse@mail.ru, Ubuntu 9.04 reached EOL on October 23, 2010. For more on this, please see https://wiki.ubuntu.com/Releases . If this is reproducible in a supported release, it will help immensely if you filed a new report with Ubuntu by ensuring you have the package xdiagnose installed, and that you click the Yes button for attaching additional debugging information running the following from a terminal: ubuntu-bug xorg Also, please feel free to subscribe me to it. For more on why this is helpful, please see https://wiki.ubuntu.com/ReportingBugs.
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.