under new modular X my usbmouse and my trackpoint behave weird, when switching
from X to console and back. 
when i start X the middle button of both devices produce normal double-click
events. when i switch to console and back to X, they produce double-click event
twice. this happens even when i disable the trackpoint.
after restarting X the behaviour is normal again.

this is a problem, because i have to switch to console to suspend to ram and
back to X when resuming. but it seems not to be a suspend2 problem, because the
weird behaviour is even there when switching to console and back to X without
suspending.

(the linux distribution i use is gentoo,so i filed the bug there first ...
http://bugs.gentoo.org/show_bug.cgi?id=124943)


--parts of my xorg.conf
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Mouse1" "SendCoreEvents"
        InputDevice    "Keyboard0" "CoreKeyboard"
        Option "BlankTime" "0"
        Option "StandbyTime" "0"
        Option "SuspendTime" "0"
        Option "OffTime" "5"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "PS/2"
        Option      "Device" "/dev/input/mice"
        Option      "EmulateWheel" "on"
        Option      "EmulateWheelButton" "2"
        Option      "ZAxisMapping" "4 5"
#        Option      "XAxisMapping" "6 7"
#        Option      "Emulate3Buttons" "off"
EndSection

Section "InputDevice"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
#        Option      "Emulate3Buttons" "off"
EndSection


--diff of Xorg.0.log before and after switching to console and back
(WW) I810(0): Successfully set original devices
> (II) I810(0): xf86UnbindGARTMemory: unbind key 7
> (II) I810(0): xf86UnbindGARTMemory: unbind key 0
> (II) I810(0): xf86UnbindGARTMemory: unbind key 1
> (II) I810(0): xf86UnbindGARTMemory: unbind key 3
> (II) I810(0): xf86UnbindGARTMemory: unbind key 2
> (II) I810(0): xf86UnbindGARTMemory: unbind key 4
> (II) I810(0): xf86UnbindGARTMemory: unbind key 5
> (II) I810(0): xf86UnbindGARTMemory: unbind key 6
> (WW) I810(0): Successfully set original devices (2)
> (II) I810(0): xf86BindGARTMemory: bind key 7 at 0x007df000 (pgoffset 2015)
> (II) I810(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
> (II) I810(0): xf86BindGARTMemory: bind key 1 at 0x07ffb000 (pgoffset 32763)
> (II) I810(0): xf86BindGARTMemory: bind key 3 at 0x07fea000 (pgoffset 32746)
> (II) I810(0): xf86BindGARTMemory: bind key 2 at 0x07ffa000 (pgoffset 32762)
> (II) I810(0): xf86BindGARTMemory: bind key 4 at 0x07c00000 (pgoffset 31744)
> (II) I810(0): xf86BindGARTMemory: bind key 5 at 0x07a00000 (pgoffset 31232)
> (II) I810(0): xf86BindGARTMemory: bind key 6 at 0x079f8000 (pgoffset 31224)
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/lib/xorg/modules/libddc.so
> (II) I810(0): VESA VBE DDC supported
> (II) I810(0): VESA VBE DDC Level none
> (II) I810(0): VESA VBE DDC transfer in appr. 0 sec.
> (II) I810(0): VESA VBE DDC read failed
> (II) I810(0): Display plane A is disabled and connected to Pipe A.
> (II) I810(0): Display plane B is enabled and connected to Pipe B.
> (II) I810(0): Enabling plane B.
> (II) I810(0): Display plane A is now disabled and connected to Pipe A.
> (II) I810(0): Display plane B is now enabled and connected to Pipe B.
> (II) I810(0): PIPEACONF is 0x80000000
> (II) I810(0): PIPEBCONF is 0x80000000
> (II) I810(0): Mode bandwidth is 47 Mpixel/s
> (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 126 Mbyte/s, 0
Mbyte/s
> (II) I810(0): [drm] dma control initialized, using IRQ 11
> (II) Mouse1: ps2EnableDataReporting: succeeded
> (II) Mouse0: ps2EnableDataReporting: succeeded