Attachment 102182 Details for Bug 75789 – dmesg(commit 8eb06d)

dmesg(commit 8eb06d)

dmesg_bdw_pc8_0703.txt (text/plain), 93.49 KB, created by lu hua on 2014-07-03 06:25:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: lu hua

Created: 2014-07-03 06:25:10 UTC

Size: 93.49 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.16.0-rc2_kcloud_8eb06d_20140703+ (root@x-kcloud3) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #42 SMP Thu Jul 3 13:55:15 EDT 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//kcloud/8eb06d9d9da65d25ed15c3251ee172300e982eff/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/8eb06d9d9da65d25ed15c3251ee172300e982eff/modules_x86_64/lib/modules/3.16.0-rc2_kcloud_8eb06d_20140703+ acpi_rsdp=0xab7e1014
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a84a1fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a84a2000-0x00000000a84c0fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000a84c1000-0x00000000ab1fafff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ab1fb000-0x00000000ab762fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ab763000-0x00000000ab7b5fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x03351000, 0x03351fff] PGTABLE
>[    0.000000] BRK [0x03352000, 0x03352fff] PGTABLE
>[    0.000000] BRK [0x03353000, 0x03353fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
>[    0.000000]  [mem 0x14f600000-0x14f7fffff] page 2M
>[    0.000000] BRK [0x03354000, 0x03354fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
>[    0.000000]  [mem 0x14c000000-0x14f5fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
>[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
>[    0.000000]  [mem 0x140000000-0x14bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xa84a1fff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xa83fffff] page 2M
>[    0.000000]  [mem 0xa8400000-0xa84a1fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa84c1000-0xab1fafff]
>[    0.000000]  [mem 0xa84c1000-0xa85fffff] page 4k
>[    0.000000]  [mem 0xa8600000-0xaaffffff] page 2M
>[    0.000000]  [mem 0xab000000-0xab1fafff] page 4k
>[    0.000000] BRK [0x03355000, 0x03355fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]  [mem 0xab7e2000-0xab7fefff] page 4k
>[    0.000000] BRK [0x03356000, 0x03356fff] PGTABLE
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000AB7E1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000AB7C8188 000114 (v01 INTEL  BDW-ULT  00000000      01000013)
>[    0.000000] ACPI: FACP 0x00000000AB7D7000 0000F4 (v05 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 0x00000000A84A2000 01E50D (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 0x00000000AB79D000 000040
>[    0.000000] ACPI: TCPA 0x00000000AB7DF000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 0x00000000AB7A0000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000AB7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7DD000 00004E (v01 MeSsdt MeSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 0x00000000AB7DC000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 0x00000000AB7DB000 0005B1 (v01 Intel  PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 0x00000000AB7DA000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x00000000AB7D9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 0x00000000AB7D8000 000094 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 0x00000000AB7D6000 000038 (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 0x00000000AB7D5000 0000BC (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 0x00000000AB7D4000 00003C (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 0x00000000AB7D3000 000104 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000AB7D2000 000250 (v01 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CE000 00340B (v01 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CD000 000C7D (v01 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7CC000 00017F (v01 INTEL  zpodd    00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 0x00000000AB7CB000 000028 (v01 INTEL  TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 0x00000000AB7CA000 00053B (v01 PmRef  Cpu0Ist  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7C9000 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7C1000 006F06 (v01 SaSsdt SaSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 0x00000000AB7C0000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AB7BF000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 0x00000000AB7BE000 0000C4 (v01 INTL   BDW-ULT  00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 0x00000000AB7BD000 0000F0 (v01 INTEL  BDW      00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 0x00000000AB7BC000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 0x00000000AB7BB000 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 0x00000000AB7BA000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
>[    0.000000]   NODE_DATA [mem 0x14f7fa000-0x14f7fdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x14f7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
>[    0.000000]   node   0: [mem 0x00059000-0x0009dfff]
>[    0.000000]   node   0: [mem 0x00100000-0xa84a1fff]
>[    0.000000]   node   0: [mem 0xa84c1000-0xab1fafff]
>[    0.000000]   node   0: [mem 0xab7e2000-0xab7fefff]
>[    0.000000]   node   0: [mem 0x100000000-0x14f7fffff]
>[    0.000000] On node 0 totalpages: 1026453
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10888 pages used for memmap
>[    0.000000]   DMA32 zone: 696825 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5088 pages used for memmap
>[    0.000000]   Normal zone: 325632 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xad800000-0xaf7fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 56
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa84a2000-0xa84c0fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab1fb000-0xab762fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab763000-0xab7b5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014f400000 s78336 r8192 d24064 u262144
>[    0.000000] pcpu-alloc: s78336 r8192 d24064 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1010392
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//kcloud/8eb06d9d9da65d25ed15c3251ee172300e982eff/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/8eb06d9d9da65d25ed15c3251ee172300e982eff/modules_x86_64/lib/modules/3.16.0-rc2_kcloud_8eb06d_20140703+ acpi_rsdp=0xab7e1014
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3936956K/4105812K available (7605K kernel code, 887K rwdata, 3928K rodata, 23072K init, 620K bss, 168856K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:1016 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1795.651 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.30 BogoMIPS (lpj=1795651)
>[    0.000008] pid_max: default: 32768 minimum: 301
>[    0.000016] ACPI: Core revision 20140424
>[    0.030790] ACPI: All ACPI Tables successfully acquired
>[    0.030821] Security Framework initialized
>[    0.031115] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.032116] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.032567] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032575] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.032832] CPU: Physical Processor ID: 0
>[    0.032835] CPU: Processor Core ID: 0
>[    0.034047] mce: CPU supports 7 MCE banks
>[    0.034060] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.034069] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.034069] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.034069] tlb_flushall_shift: 6
>[    0.034553] Freeing SMP alternatives memory: 32K (ffffffff832ad000 - ffffffff832b5000)
>[    0.035227] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.045227] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04)
>[    0.045237] TSC deadline timer enabled
>[    0.045263] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.045272] ... version:                3
>[    0.045274] ... bit width:              48
>[    0.045276] ... generic registers:      4
>[    0.045278] ... value mask:             0000ffffffffffff
>[    0.045281] ... max period:             0000ffffffffffff
>[    0.045283] ... fixed-purpose events:   3
>[    0.045285] ... event mask:             000000070000000f
>[    0.045594] x86: Booting SMP configuration:
>[    0.045598] .... node  #0, CPUs:      #1
>[    0.057962] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.060092]  #2<7>[    0.072490] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.086980]  #3
>[    0.086980] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.089050] x86: Booted up 1 node, 4 CPUs
>[    0.089057] smpboot: Total of 4 processors activated (14365.20 BogoMIPS)
>[    0.094245] devtmpfs: initialized
>[    0.094610] PM: Registering ACPI NVS region [mem 0xab763000-0xab7b5fff] (339968 bytes)
>[    0.094846] xor: automatically using best checksumming function:
>[    0.103996]    avx       : 17208.000 MB/sec
>[    0.104031] RTC time: 23:11:12, date: 07/01/14
>[    0.104096] NET: Registered protocol family 16
>[    0.104333] cpuidle: using governor ladder
>[    0.104337] cpuidle: using governor menu
>[    0.104458] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.104462] ACPI: bus type PCI registered
>[    0.104509] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.104513] PCI: not using MMCONFIG
>[    0.104516] PCI: Using configuration type 1 for base access
>[    0.125023] raid6: sse2x1    5195 MB/s
>[    0.142033] raid6: sse2x2    6593 MB/s
>[    0.159050] raid6: sse2x4    7917 MB/s
>[    0.176068] raid6: avx2x1   10472 MB/s
>[    0.193078] raid6: avx2x2   12316 MB/s
>[    0.210092] raid6: avx2x4   14386 MB/s
>[    0.210094] raid6: using algorithm avx2x4 (14386 MB/s)
>[    0.210097] raid6: using avx2x2 recovery algorithm
>[    0.210152] ACPI: Added _OSI(Module Device)
>[    0.210156] ACPI: Added _OSI(Processor Device)
>[    0.210159] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.210161] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.223346] ACPI: Executed 18 blocks of module-level executable AML code
>[    0.254294] ACPI: Dynamic OEM Table Load:
>[    0.254314] ACPI: SSDT 0xFFFF8801495A5800 0004AE (v01 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.259453] ACPI: Dynamic OEM Table Load:
>[    0.259472] ACPI: SSDT 0xFFFF8801495A6000 000792 (v01 PmRef  ApIst    00003000 INTL 20130927)
>[    0.264299] ACPI: Dynamic OEM Table Load:
>[    0.264315] ACPI: SSDT 0xFFFF880149B9E600 000119 (v01 PmRef  ApCst    00003000 INTL 20130927)
>[    0.273675] ACPI: Interpreter enabled
>[    0.273686] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
>[    0.273696] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
>[    0.273725] ACPI: (supports S0 S3 S4 S5)
>[    0.273727] ACPI: Using IOAPIC for interrupt routing
>[    0.273756] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.276215] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.276474] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.277005] ACPI: Power Resource [PG00] (on)
>[    0.283554] ACPI: Power Resource [PG01] (on)
>[    0.290585] ACPI: Power Resource [PG02] (on)
>[    0.321237] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
>[    0.322682] ACPI: Power Resource [FN00] (off)
>[    0.322771] ACPI: Power Resource [FN01] (off)
>[    0.322856] ACPI: Power Resource [FN02] (off)
>[    0.322938] ACPI: Power Resource [FN03] (off)
>[    0.323019] ACPI: Power Resource [FN04] (off)
>[    0.324037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.324046] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.324971] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.325306] PCI host bridge to bus 0000:00
>[    0.325310] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.325314] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.325317] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.325321] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.325324] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
>[    0.325327] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
>[    0.325330] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
>[    0.325334] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
>[    0.325337] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
>[    0.325340] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
>[    0.325343] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
>[    0.325347] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
>[    0.325350] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
>[    0.325355] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
>[    0.325359] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
>[    0.325362] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
>[    0.325368] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
>[    0.325371] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff]
>[    0.325382] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.325650] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.325665] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
>[    0.325674] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    0.325680] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.325937] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.325946] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit]
>[    0.326222] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.326242] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit]
>[    0.326304] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.326514] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.326565] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.326586] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit]
>[    0.326651] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.326902] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.326920] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff]
>[    0.326929] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff]
>[    0.326938] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.327000] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.327206] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.327262] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.327612] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.327629] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.327637] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.327645] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.327652] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.327660] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.327669] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff]
>[    0.327707] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.327943] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.327958] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit]
>[    0.327980] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.328232] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.328261] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit]
>[    0.328577] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.330958] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.331018] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.331074] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.331129] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.331183] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.331238] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.331293] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.331352] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.331929] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.332164] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.332278] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.332283] vgaarb: loaded
>[    0.332285] vgaarb: bridge control possible 0000:00:02.0
>[    0.332381] SCSI subsystem initialized
>[    0.332436] libata version 3.00 loaded.
>[    0.332486] ACPI: bus type USB registered
>[    0.332524] usbcore: registered new interface driver usbfs
>[    0.332540] usbcore: registered new interface driver hub
>[    0.332577] usbcore: registered new device driver usb
>[    0.332638] pps_core: LinuxPPS API ver. 1 registered
>[    0.332641] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.332656] PTP clock support registered
>[    0.332751] PCI: Using ACPI for IRQ routing
>[    0.338891] PCI: pci_cache_line_size set to 64 bytes
>[    0.338923] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.338925] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>[    0.338927] e820: reserve RAM buffer [mem 0xa84a2000-0xabffffff]
>[    0.338930] e820: reserve RAM buffer [mem 0xab1fb000-0xabffffff]
>[    0.338932] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff]
>[    0.338934] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
>[    0.339098] NetLabel: Initializing
>[    0.339101] NetLabel:  domain hash size = 128
>[    0.339103] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.339117] NetLabel:  unlabeled traffic allowed by default
>[    0.339246] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.339254] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.341289] Switched to clocksource hpet
>[    0.345212] pnp: PnP ACPI init
>[    0.345230] ACPI: bus type PNP registered
>[    0.345568] system 00:00: [io  0x06a4] has been reserved
>[    0.345575] system 00:00: [io  0x06a0] has been reserved
>[    0.345582] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.345802] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.345808] system 00:01: [io  0xffff] has been reserved
>[    0.345814] system 00:01: [io  0xffff] has been reserved
>[    0.345818] system 00:01: [io  0xffff] has been reserved
>[    0.345823] system 00:01: [io  0x1800-0x18fe] could not be reserved
>[    0.345828] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.345832] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.345896] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.345955] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.345962] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.346107] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.346256] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.346923] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.346930] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.346936] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.346941] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.346946] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.346950] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.346954] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.346958] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.348268] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.348275] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.348282] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.348294] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.348299] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.348303] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.348307] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.348310] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
>[    0.348314] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.348318] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.348321] system 00:07: [mem 0xaf810000-0xaf81ffff] has been reserved
>[    0.348325] system 00:07: [mem 0xaf800000-0xaf80ffff] has been reserved
>[    0.348329] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.348640] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.348648] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.348800] pnp: PnP ACPI: found 9 devices
>[    0.348803] ACPI: bus type PNP unregistered
>[    0.355881] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.355884] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.355886] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.355888] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
>[    0.355890] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
>[    0.355892] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
>[    0.355894] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
>[    0.355896] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
>[    0.355898] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
>[    0.355900] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
>[    0.355902] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
>[    0.355904] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
>[    0.355906] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
>[    0.355908] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
>[    0.355910] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
>[    0.355912] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
>[    0.355914] pci_bus 0000:00: resource 20 [mem 0xaf800000-0xfeafffff]
>[    0.355950] NET: Registered protocol family 2
>[    0.356154] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.356245] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.356339] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.356363] TCP: reno registered
>[    0.356376] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.356394] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.356455] NET: Registered protocol family 1
>[    0.356525] RPC: Registered named UNIX socket transport module.
>[    0.356528] RPC: Registered udp transport module.
>[    0.356530] RPC: Registered tcp transport module.
>[    0.356532] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.356544] pci 0000:00:02.0: Boot video device
>[    0.356632] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.356635] pci 0000:00:14.0: PCI INT A: no GSI
>[    0.356724] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.356742] PCI: CLS 0 bytes, default 64
>[    0.879123] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.879130] software IO TLB [mem 0xa44a2000-0xa84a2000] (64MB) mapped at [ffff8800a44a2000-ffff8800a84a1fff]
>[    0.879270] Simple Boot Flag at 0x47 set to 0x1
>[    0.880158] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.880206] audit: initializing netlink subsys (disabled)
>[    0.880217] audit: type=2000 audit(1404256272.834:1): initialized
>[    0.880450] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.882460] VFS: Disk quotas dquot_6.5.2
>[    0.882503] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.883285] NFS: Registering the id_resolver key type
>[    0.883296] Key type id_resolver registered
>[    0.883298] Key type id_legacy registered
>[    0.883306] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.883481] fuse init (API version 7.23)
>[    0.883594] msgmni has been set to 7689
>[    0.883860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.883868] io scheduler noop registered
>[    0.883873] io scheduler deadline registered
>[    0.883917] io scheduler cfq registered (default)
>[    0.884024] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.884115] efifb: probing for efifb
>[    0.884140] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010880000, using 8100k, total 8100k
>[    0.884144] efifb: mode is 1920x1080x32, linelength=7680, pages=2032
>[    0.884146] efifb: scrolling: redraw
>[    0.884150] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.890938] Console: switching to colour frame buffer device 240x67
>[    0.897208] fb0: EFI VGA frame buffer device
>[    0.897343] ACPI: Fan [FAN0] (off)
>[    0.897403] ACPI: Fan [FAN1] (off)
>[    0.897461] ACPI: Fan [FAN2] (off)
>[    0.897516] ACPI: Fan [FAN3] (off)
>[    0.897572] ACPI: Fan [FAN4] (off)
>[    0.897992] Monitor-Mwait will be used to enter C-1 state
>[    0.899813] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.899848] ACPI: Thermal Zone [TZ00] (45 C)
>[    0.900605] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.900638] ACPI: Thermal Zone [TZ01] (45 C)
>[    0.900717] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.921387] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.921928] Non-volatile memory driver v1.3
>[    0.921956] Linux agpgart interface v0.103
>[    0.923449] brd: module loaded
>[    0.923587] Loading iSCSI transport class v2.0-870.
>[    0.923782] iscsi: registered transport (tcp)
>[    0.923920] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.923980] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.924143] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
>[    0.924247] iscsi: registered transport (qla4xxx)
>[    0.924294] QLogic iSCSI HBA Driver
>[    0.924359] DC390: clustering now enabled by default. If you get problems load
>[    0.924406]        with "disable_clustering=1" and report to maintainers
>[    0.924477] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.924570] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.924621] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.924705] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.924768] osst :I: Tape driver with OnStream support version 0.99.4
>[    0.924768] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.924920] SCSI Media Changer driver v0.25 
>[    0.924994] ahci 0000:00:1f.2: version 3.0
>[    0.925131] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X
>[    0.936115] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x2 impl SATA mode
>[    0.936161] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    0.936527] scsi0 : ahci
>[    0.936658] scsi1 : ahci
>[    0.936724] ata1: DUMMY
>[    0.936742] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56
>[    0.939131] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.940553] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.942062] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.943506] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.944949] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.946385] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.947831] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.949265] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.950843] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.952335] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[    1.116471] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.117928] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4
>[    1.119401] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.120887] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    1.122354] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.123812] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.125313] usbcore: registered new interface driver catc
>[    1.126803] usbcore: registered new interface driver kaweth
>[    1.128267] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.129756] usbcore: registered new interface driver pegasus
>[    1.131245] usbcore: registered new interface driver rtl8150
>[    1.132711] usbcore: registered new interface driver asix
>[    1.134150] usbcore: registered new interface driver ax88179_178a
>[    1.135578] usbcore: registered new interface driver cdc_ether
>[    1.136993] usbcore: registered new interface driver dm9601
>[    1.138388] usbcore: registered new interface driver gl620a
>[    1.139765] usbcore: registered new interface driver net1080
>[    1.141132] usbcore: registered new interface driver plusb
>[    1.142519] usbcore: registered new interface driver rndis_host
>[    1.143899] usbcore: registered new interface driver cdc_subset
>[    1.145279] usbcore: registered new interface driver zaurus
>[    1.146664] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.148066] usbcore: registered new interface driver cdc_ncm
>[    1.149511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.150879] ehci-pci: EHCI PCI platform driver
>[    1.152265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.153634] ohci-pci: OHCI PCI platform driver
>[    1.155012] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.156467] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    1.157831] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
>[    1.159202] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.160603] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.162055] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.162072] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
>[    1.162133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.163504] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.164869] usb usb1: Product: xHCI Host Controller
>[    1.166226] usb usb1: Manufacturer: Linux 3.16.0-rc2_kcloud_8eb06d_20140703+ xhci_hcd
>[    1.167584] usb usb1: SerialNumber: 0000:00:14.0
>[    1.169062] hub 1-0:1.0: USB hub found
>[    1.170408] hub 1-0:1.0: 11 ports detected
>[    1.175401] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.176766] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.178140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.179472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.180801] usb usb2: Product: xHCI Host Controller
>[    1.182119] usb usb2: Manufacturer: Linux 3.16.0-rc2_kcloud_8eb06d_20140703+ xhci_hcd
>[    1.183459] usb usb2: SerialNumber: 0000:00:14.0
>[    1.184908] hub 2-0:1.0: USB hub found
>[    1.186222] hub 2-0:1.0: 4 ports detected
>[    1.188457] usb: failed to peer usb2-port3 and usb1-port5 by location (usb2-port3:none) (usb1-port5:usb2-port2)
>[    1.189786] usb usb2-port3: failed to peer to usb1-port5 (-16)
>[    1.191141] usb: port power management may be unreliable
>[    1.193043] usbcore: registered new interface driver usb-storage
>[    1.194442] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.195799] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.197579] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.199007] mousedev: PS/2 mouse device common for all mice
>[    1.200454] rtc_cmos 00:02: RTC can wake from S4
>[    1.201928] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.203299] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.204652] i2c /dev entries driver
>[    1.206023] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.207586] usbcore: registered new interface driver usbhid
>[    1.208911] usbhid: USB HID core driver
>[    1.210296] TCP: cubic registered
>[    1.211600] Initializing XFRM netlink socket
>[    1.212903] NET: Registered protocol family 17
>[    1.214221] Key type dns_resolver registered
>[    1.215916] registered taskstats version 1
>[    1.217652] Btrfs loaded
>[    1.219217]   Magic number: 6:138:200
>[    1.220526] acpi device:55: hash matches
>[    1.221881] PM: Hibernation image not present or could not be loaded.
>[    1.221899] Warning: unable to open an initial console.
>[    1.238366] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.243999] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.245601] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.246965] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.248625] ata2.00: configured for UDMA/133
>[    1.250109] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5
>[    1.251734] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.251773] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.254649] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.256129] sd 1:0:0:0: [sda] Write Protect is off
>[    1.257588] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.257599] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.260488]  sda: sda1 sda2 sda3
>[    1.262229] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.268511] Freeing unused kernel memory: 23072K (ffffffff81c25000 - ffffffff832ad000)
>[    1.305899] dracut: dracut-018-35.git20120510.fc17
>[    1.335441] udevd[1411]: starting version 182
>[    1.352705] [drm] Initialized drm 1.1.0 20060810
>[    1.356007] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    1.359617] ACPI: Lid Switch [LID0]
>[    1.362317] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    1.364241] ACPI: Power Button [PWRB]
>[    1.366055] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    1.367894] ACPI: Sleep Button [SLPB]
>[    1.368000] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.368053] ACPI: Power Button [PWRF]
>[    1.371497] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x07 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    1.371497] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH
>[    1.371568] [drm] Memory usable by graphics device = 4096M
>[    1.371569] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.371570] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.371571] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.371571] [drm] Replacing VGA console driver
>[    1.383211] Console: switching to colour dummy device 80x25
>[    1.383219] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
>[    1.383221] fb: switching to inteldrmfb from EFI VGA
>[    1.384280] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab795018
>[    1.384290] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.384292] [drm:intel_opregion_setup] SWSCI supported
>[    1.389942] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
>[    1.389944] [drm:intel_opregion_setup] ASLE supported
>[    1.390083] i915 0000:00:02.0: irq 59 for MSI/MSI-X
>[    1.390094] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.390098] [drm] Driver supports precise vblank timestamp query.
>[    1.390104] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.390107] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    1.390111] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.390114] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.390116] [drm:parse_lfp_panel_data] DRRS supported mode is seamless
>[    1.390120] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.390124] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    1.390126] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    1.390129] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.390131] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.390134] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.390136] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.390138] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.390141] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.390143] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.390145] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.390147] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3
>[    1.390149] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.390150] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3
>[    1.390152] [drm:parse_ddi_port] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.390154] [drm:parse_ddi_port] VBT HDMI level shift for port D: 3
>[    1.390212] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.390217] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000
>[    1.390220] [drm:intel_display_power_get] enabling always-on
>[    1.390222] [drm:intel_display_power_get] enabling display
>[    1.390226] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.390332] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.390334] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.390335] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.390337] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.390339] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.390341] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.390342] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.390344] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.390346] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.390347] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.390349] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.390351] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.390352] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.390354] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.390355] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.390358] [drm:intel_modeset_init] 3 display pipes available.
>[    1.390372] [drm:intel_ddi_pll_init] CDCLK running at 675000KHz
>[    1.390681] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.390746] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.390749] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.390753] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.390755] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.390758] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.390861] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    1.390869] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.391147] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[    1.391323] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.403266] random: nonblocking pool is initialized
>[    1.414796] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.414799] [drm] seamless DRRS supported for eDP panel.
>[    1.414836] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    1.414847] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.414887] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.420942] [drm:intel_modeset_readout_hw_state] [CRTC:6] hw state readout: enabled
>[    1.420946] [drm:intel_modeset_readout_hw_state] [CRTC:10] hw state readout: disabled
>[    1.420948] [drm:intel_modeset_readout_hw_state] [CRTC:14] hw state readout: disabled
>[    1.420951] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000
>[    1.420958] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
>[    1.420961] [drm:intel_modeset_readout_hw_state] [ENCODER:16:TMDS-16] hw state readout: enabled, pipe A
>[    1.420964] [drm:intel_modeset_readout_hw_state] [ENCODER:26:TMDS-26] hw state readout: disabled, pipe A
>[    1.420966] [drm:intel_modeset_readout_hw_state] [ENCODER:29:TMDS-29] hw state readout: disabled, pipe A
>[    1.420970] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:eDP-1] hw state readout: enabled
>[    1.420972] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:DP-1] hw state readout: disabled
>[    1.420974] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:HDMI-A-1] hw state readout: disabled
>[    1.420977] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:HDMI-A-2] hw state readout: disabled
>[    1.420981] [drm:intel_dump_pipe_config] [CRTC:6][setup_hw_state] config for pipe A
>[    1.420982] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.420984] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.420986] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.420989] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.420990] [drm:intel_dump_pipe_config] requested mode:
>[    1.420993] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    1.420995] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.420997] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.421000] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa
>[    1.421001] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.421003] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.421005] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.421007] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.421008] [drm:intel_dump_pipe_config] ips: 0
>[    1.421010] [drm:intel_dump_pipe_config] double wide: 0
>[    1.421013] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.421014] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.421018] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.421020] [drm:intel_dump_pipe_config] [CRTC:10][setup_hw_state] config for pipe B
>[    1.421022] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.421023] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.421025] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.421027] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.421029] [drm:intel_dump_pipe_config] requested mode:
>[    1.421031] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.421033] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.421035] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.421037] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.421039] [drm:intel_dump_pipe_config] port clock: 0
>[    1.421040] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.421042] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.421044] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.421045] [drm:intel_dump_pipe_config] ips: 0
>[    1.421046] [drm:intel_dump_pipe_config] double wide: 0
>[    1.421049] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.421050] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    1.421054] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    1.421056] [drm:intel_dump_pipe_config] [CRTC:14][setup_hw_state] config for pipe C
>[    1.421057] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.421058] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.421060] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.421062] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.421064] [drm:intel_dump_pipe_config] requested mode:
>[    1.421066] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.421067] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.421070] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.421072] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.421073] [drm:intel_dump_pipe_config] port clock: 0
>[    1.421075] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.421076] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.421078] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.421079] [drm:intel_dump_pipe_config] ips: 0
>[    1.421081] [drm:intel_dump_pipe_config] double wide: 0
>[    1.421091] [drm:intel_connector_check_state] [CONNECTOR:17:eDP-1]
>[    1.421096] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    1.421099] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[    1.421101] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[    1.421103] [drm:check_crtc_state] [CRTC:6]
>[    1.421115] [drm:check_crtc_state] [CRTC:10]
>[    1.421118] [drm:check_crtc_state] [CRTC:14]
>[    1.421125] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.421128] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.421133] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.421137] [drm:intel_alloc_plane_obj] plane fb obj ffff880002d24000
>[    1.421140] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.421142] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.424377] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
>[    1.424380] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
>[    1.424382] [drm:i915_gem_context_init] HW context support initialized
>[    1.424403] [drm:init_status_page] render ring hws offset: 0x007fb000
>[    1.424487] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000
>[    1.424494] [drm:init_status_page] bsd ring hws offset: 0x0081d000
>[    1.424565] [drm:init_status_page] blitter ring hws offset: 0x0083e000
>[    1.424625] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000
>[    1.424877] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1]
>[    1.424880] [drm:intel_dp_detect] [CONNECTOR:17:eDP-1]
>[    1.424889] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.424894] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1] probed modes :
>[    1.424908] [drm:drm_mode_debug_printmodeline] Modeline 18:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.424911] [drm:drm_mode_debug_printmodeline] Modeline 19:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    1.424913] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[    1.424914] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[    1.424917] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected
>[    1.424919] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1]
>[    1.424921] [drm:intel_hdmi_detect] [CONNECTOR:28:HDMI-A-1]
>[    1.425082] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    1.425084] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.425086] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] disconnected
>[    1.425087] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2]
>[    1.425089] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2]
>[    1.425244] [drm:gen8_irq_handler] *ERROR* The master control interrupt lied (SDE)!
>[    1.425261] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.425262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.425264] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected
>[    1.425265] [drm:drm_setup_crtcs] 
>[    1.425267] [drm:drm_enable_connectors] connector 17 enabled? yes
>[    1.425269] [drm:drm_enable_connectors] connector 27 enabled? no
>[    1.425270] [drm:drm_enable_connectors] connector 28 enabled? no
>[    1.425272] [drm:drm_enable_connectors] connector 30 enabled? no
>[    1.425274] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.425276] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1
>[    1.425278] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:6]: 1920x1080
>[    1.425280] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.425281] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.425283] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.425285] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 6
>[    1.425287] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.425289] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    1.425292] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400
>[    1.426225] [drm:intelfb_create] allocated 1920x1080 fb: 0x00881000, bo ffff880002d25500
>[    1.426295] fbcon: inteldrmfb (fb0) is primary device
>[    1.426341] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    1.426342] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.426344] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.426346] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.426347] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=1
>[    1.426349] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    1.426352] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.426355] [drm:connected_sink_compute_bpp] [CONNECTOR:17:eDP-1] checking for sink bpp constrains
>[    1.426358] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[    1.426359] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW
>[    1.426360] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[    1.426365] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[    1.426366] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    1.426368] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.426369] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A
>[    1.426370] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.426371] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.426372] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.426374] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    1.426375] [drm:intel_dump_pipe_config] requested mode:
>[    1.426377] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.426377] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.426379] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    1.426381] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[    1.426382] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.426383] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.426384] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.426385] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.426386] [drm:intel_dump_pipe_config] ips: 1
>[    1.426386] [drm:intel_dump_pipe_config] double wide: 0
>[    1.426403] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.426412] [drm:intel_edp_backlight_off] 
>[    1.442068] [drm:intel_edp_panel_off] Turn eDP power off
>[    1.535898] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    1.626854] [drm:wait_panel_off] Wait for panel power off time
>[    1.626857] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.681833] [drm:wait_panel_status] Wait complete
>[    1.681838] [drm:intel_update_fbc] no output, disabling
>[    1.681843] [drm:intel_display_power_put] disabling display
>[    1.681846] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.681869] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680
>[    1.681875] [drm:intel_edp_panel_on] Turn eDP power on
>[    1.681877] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.704870] usb 1-1: New USB device found, idVendor=413c, idProduct=2107
>[    1.704872] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.704873] usb 1-1: Product: Dell USB Entry Keyboard
>[    1.704874] usb 1-1: Manufacturer: DELL
>[    1.704969] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    1.708086] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:413C:2107.0001/input/input5
>[    1.708172] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-1/input0
>[    1.860784] usb 1-6: new low-speed USB device number 3 using xhci_hcd
>[    1.879763] tsc: Refined TSC clocksource calibration: 1795.845 MHz
>[    2.028083] usb 1-6: New USB device found, idVendor=046d, idProduct=c077
>[    2.028085] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.028086] usb 1-6: Product: USB Optical Mouse
>[    2.028088] usb 1-6: Manufacturer: Logitech
>[    2.028173] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.029903] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0002/input/input6
>[    2.030030] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
>[    2.227627] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    2.227629] [drm:wait_panel_status] Wait complete
>[    2.227633] [drm:wait_panel_on] Wait for panel power on
>[    2.227636] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.436560] [drm:wait_panel_status] Wait complete
>[    2.436564] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[    2.436571] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.437676] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.438154] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.438930] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.439224] [drm:intel_edp_backlight_on] 
>[    2.439228] [drm:intel_panel_enable_backlight] pipe A
>[    2.439234] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.439237] [drm:intel_edp_psr_enable] PSR not supported by this panel
>[    2.474548] [drm:intel_update_fbc] disabled per chip default
>[    2.474552] [drm:intel_connector_check_state] [CONNECTOR:17:eDP-1]
>[    2.474556] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    2.474558] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[    2.474559] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[    2.474561] [drm:check_crtc_state] [CRTC:6]
>[    2.474573] [drm:check_crtc_state] [CRTC:10]
>[    2.474574] [drm:check_crtc_state] [CRTC:14]
>[    2.474576] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    2.474578] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    2.474579] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.474581] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    2.474582] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    2.474583] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.474589] Console: switching to colour frame buffer device 240x67
>[    2.474596] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.474598] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.474599] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.482221] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.482257] i915 0000:00:02.0: registered panic notifier
>[    2.489043] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.489168] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
>[    2.489337] [drm] Initialized i915 1.6.0 20140606 for 0000:00:02.0 on minor 0
>[    2.493295] dracut: Starting plymouth daemon
>[    2.501002] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.501005] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.501007] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.511037] [drm:i915_gem_open] 
>[    2.511068] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.511072] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.511074] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.511077] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    2.511079] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    2.511081] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.511083] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    2.511085] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    2.511087] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.511098] [drm:i915_gem_open] 
>[    2.511109] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.511111] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.511113] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.511115] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    2.511117] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    2.511119] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.511120] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    2.511122] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    2.511124] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.511131] [drm:i915_gem_open] 
>[    2.511391] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.511395] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.511398] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.511401] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[    2.511404] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[    2.511407] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.511409] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[    2.511412] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[    2.511415] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.511608] dracut: error: unexpectedly disconnected from boot status daemon
>[    2.517275] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.517278] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.517279] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.582780] ACPI: AC Adapter [ADP1] (on-line)
>[    2.607417] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.607522] ACPI: Battery Slot [BAT0] (battery present)
>[    2.607623] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.607713] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.607866] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.607955] ACPI: Battery Slot [BAT2] (battery absent)
>[    2.609159] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    2.609227] EXT4-fs (sda2): write access will be enabled during recovery
>[    2.621330] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    2.621546] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
>[    2.621709] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.622873] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    2.623215] [drm:intel_display_power_get] enabling display
>[    2.623289] [drm:hsw_set_power_well] Enabling power well
>[    2.623751] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
>[    2.625671] EXT4-fs (sda2): recovery complete
>[    2.627064] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    2.630420] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    2.671321] iTCO_vendor_support: vendor-support=0
>[    2.671593] ppdev: user-space parallel port driver
>[    2.676543] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    2.676548] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    2.676550] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    2.676695] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    2.676734] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.676900] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.697367] dracut: Checking ext4: /dev/sda2
>[    2.699706] dracut: issuing e2fsck -a  /dev/sda2
>[    2.709484] dracut: /dev/sda2: clean, 854401/13598720 files, 26473471/54372608 blocks
>[    2.712101] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro
>[    2.724848] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    2.730685] dracut: Mounted root filesystem /dev/sda2
>[    2.743392] device-mapper: uevent: version 1.0.3
>[    2.745753] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.751454] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.770573] dracut: Switching root
>[    2.834653] init: ureadahead main process (2718) terminated with status 5
>[    2.879419] Switched to clocksource tsc
>[    2.932488] systemd-udevd[2828]: starting version 204
>[    3.089817] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    3.089821] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    3.089823] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    3.095962] systemd-udevd[3476]: could not open moddep file '/lib/modules/3.16.0-rc2_kcloud_8eb06d_20140703+/modules.dep.bin'
>[    3.106601] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    3.106941] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    3.106944] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    3.123170] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    3.123174] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    3.123176] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    3.151413] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.153367] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.191006] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    3.191010] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    3.191013] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    3.199454] Adding 16440316k swap on /dev/sda3.  Priority:-1 extents:1 across:16440316k SS
>[    3.231821] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    3.263011] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.265353] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.336027] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.341789] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.418327] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
>[    3.427887] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    3.432086] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    3.438985] init: failsafe main process (3737) killed by TERM signal
>[    3.553355] init: avahi-cups-reload main process (3850) terminated with status 1
>[    3.631940] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
>[    3.701242] e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
>[    3.802098] e1000e 0000:00:19.0: irq 62 for MSI/MSI-X
>[    3.853225] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[    3.853229] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[    3.853231] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[    3.863680] init: lightdm main process (4001) terminated with status 1
>[    3.869550] init: plymouth-ready (started) main process (3571) terminated with status 1
>[    4.394852] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    4.394863] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    6.512740] e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[    8.721841] init: failsafe-x main process (4087) terminated with status 127
>[   63.657485] usb 1-6: USB disconnect, device number 3
>[   65.176979] usb 1-6: new low-speed USB device number 4 using xhci_hcd
>[   65.344300] usb 1-6: New USB device found, idVendor=046d, idProduct=c077
>[   65.344303] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   65.344305] usb 1-6: Product: USB Optical Mouse
>[   65.344307] usb 1-6: Manufacturer: Logitech
>[   65.344395] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   65.346135] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0003/input/input9
>[   65.346295] hid-generic 0003:046D:C077.0003: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
>[  125.339218] usb 1-6: USB disconnect, device number 4
>[  126.858779] usb 1-6: new low-speed USB device number 5 using xhci_hcd
>[  127.026033] usb 1-6: New USB device found, idVendor=046d, idProduct=c077
>[  127.026037] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  127.026039] usb 1-6: Product: USB Optical Mouse
>[  127.026041] usb 1-6: Manufacturer: Logitech
>[  127.026132] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  127.027993] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0004/input/input10
>[  127.028128] hid-generic 0003:046D:C077.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
>[  129.028632] [drm:i915_gem_open] 
>[  129.028663] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[  129.028667] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  129.028669] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  129.028672] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[  129.028674] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[  129.028676] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  129.028678] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[  129.028680] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[  129.028682] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  129.028691] [drm:i915_gem_open] 
>[  129.029002] [drm:i915_gem_open] 
>[  129.029027] [drm:i915_gem_open] 
>[  129.029085] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[3]
>[  129.029102] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[3]
>[  129.029115] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[  129.029118] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1]
>[  129.029123] [drm:intel_dp_detect] [CONNECTOR:17:eDP-1]
>[  129.029138] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[  129.029144] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1] probed modes :
>[  129.029150] [drm:drm_mode_debug_printmodeline] Modeline 18:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  129.029155] [drm:drm_mode_debug_printmodeline] Modeline 19:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[  129.029159] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[  129.029209] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[  129.029212] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[  129.029215] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[  129.029222] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected
>[  129.029226] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[  129.029229] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1]
>[  129.029231] [drm:intel_dp_detect] [CONNECTOR:27:DP-1]
>[  129.029237] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected
>[  129.029266] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
>[  129.029269] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1]
>[  129.029273] [drm:intel_hdmi_detect] [CONNECTOR:28:HDMI-A-1]
>[  129.029439] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  129.029442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  129.029444] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] disconnected
>[  129.029446] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
>[  129.029448] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1]
>[  129.029450] [drm:intel_hdmi_detect] [CONNECTOR:28:HDMI-A-1]
>[  129.029607] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  129.029609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  129.029611] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] disconnected
>[  129.029630] [drm:drm_mode_getconnector] [CONNECTOR:30:?]
>[  129.029631] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2]
>[  129.029633] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2]
>[  129.029794] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  129.029796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[  129.029797] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected
>[  129.029799] [drm:drm_mode_getconnector] [CONNECTOR:30:?]
>[  129.029801] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2]
>[  129.029803] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2]
>[  129.029957] [drm:gen8_irq_handler] *ERROR* The master control interrupt lied (SDE)!
>[  129.030020] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  129.030026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[  129.030033] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected
>[  129.032240] [drm:drm_mode_setcrtc] [CRTC:6]
>[  129.032242] [drm:intel_crtc_set_config] [CRTC:6] [NOFB]
>[  129.032245] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=0
>[  129.032247] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [NOCRTC]
>[  129.032248] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  129.032250] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  129.032252] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[  129.032255] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[  129.041996] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  129.042004] [drm:intel_edp_backlight_off] 
>[  129.057972] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  129.057980] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  129.058144] [drm:intel_edp_panel_off] Turn eDP power off
>[  129.242918] [drm:wait_panel_off] Wait for panel power off time
>[  129.242924] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  129.297895] [drm:wait_panel_status] Wait complete
>[  129.297906] [drm:intel_update_fbc] no output, disabling
>[  129.297914] [drm:intel_display_power_put] disabling always-on
>[  129.297920] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[  129.297922] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[  129.297924] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[  129.297926] [drm:check_crtc_state] [CRTC:6]
>[  129.297929] [drm:check_crtc_state] [CRTC:10]
>[  129.297932] [drm:check_crtc_state] [CRTC:14]
>[  129.297939] [drm:drm_mode_setcrtc] [CRTC:10]
>[  129.297941] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[  129.297944] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[  129.297947] [drm:drm_mode_setcrtc] [CRTC:14]
>[  129.297948] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[  129.297951] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[  130.042674] [drm:intel_display_power_put] disabling display
>[  130.042679] [drm:hsw_set_power_well] Requesting to disable the power well
>[  130.042704] [drm:intel_runtime_suspend] Suspending device
>[  130.042745] [drm:hsw_enable_pc8] Enabling package C8+
>[  130.050624] [drm:intel_runtime_suspend] Device suspended
>[  187.012950] usb 1-6: USB disconnect, device number 5
>[  188.532586] usb 1-6: new low-speed USB device number 6 using xhci_hcd
>[  188.699770] usb 1-6: New USB device found, idVendor=046d, idProduct=c077
>[  188.699773] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  188.699775] usb 1-6: Product: USB Optical Mouse
>[  188.699777] usb 1-6: Manufacturer: Logitech
>[  188.699869] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  188.701760] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0005/input/input11
>[  188.701907] hid-generic 0003:046D:C077.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
>[  248.702680] usb 1-6: USB disconnect, device number 6
>[  249.330328] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[  249.330330] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[  249.330332] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=0
>[  249.330333] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[  249.330334] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  249.330335] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[  249.330336] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[  249.330338] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  249.330341] [drm:connected_sink_compute_bpp] [CONNECTOR:17:eDP-1] checking for sink bpp constrains
>[  249.330344] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz
>[  249.330345] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW
>[  249.330346] [drm:intel_dp_compute_config] using min 06 link bw per VBT
>[  249.330351] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24
>[  249.330352] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[  249.330354] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[  249.330356] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A
>[  249.330356] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  249.330357] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[  249.330359] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  249.330360] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[  249.330361] [drm:intel_dump_pipe_config] requested mode:
>[  249.330364] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  249.330364] [drm:intel_dump_pipe_config] adjusted mode:
>[  249.330366] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[  249.330368] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa
>[  249.330369] [drm:intel_dump_pipe_config] port clock: 270000
>[  249.330370] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[  249.330371] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  249.330372] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  249.330373] [drm:intel_dump_pipe_config] ips: 1
>[  249.330374] [drm:intel_dump_pipe_config] double wide: 0
>[  249.340721] [drm:intel_runtime_resume] Resuming device
>[  249.342692] [drm:hsw_disable_pc8] Disabling package C8+
>[  249.356757] [drm:intel_runtime_resume] Device resumed
>[  249.356759] [drm:intel_display_power_get] enabling always-on
>[  249.356784] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680
>[  249.356793] [drm:intel_edp_panel_on] Turn eDP power on
>[  249.356796] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  249.356800] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[  249.356802] [drm:wait_panel_status] Wait complete
>[  249.356806] [drm:wait_panel_on] Wait for panel power on
>[  249.356809] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[  249.565611] [drm:wait_panel_status] Wait complete
>[  249.565615] [drm:_edp_panel_vdd_on] Turning eDP VDD on
>[  249.565622] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  249.566697] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[  249.567155] [drm:intel_dp_start_link_train] clock recovery OK
>[  249.567914] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[  249.568199] [drm:intel_edp_backlight_on] 
>[  249.568205] [drm:intel_panel_enable_backlight] pipe A
>[  249.568211] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[  249.568214] [drm:intel_edp_psr_enable] PSR not supported by this panel
>[  249.603597] [drm:intel_update_fbc] disabled per chip default
>[  249.603602] [drm:intel_connector_check_state] [CONNECTOR:17:eDP-1]
>[  249.603606] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[  249.603608] [drm:check_encoder_state] [ENCODER:26:TMDS-26]
>[  249.603609] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[  249.603611] [drm:check_crtc_state] [CRTC:6]
>[  249.603623] [drm:check_crtc_state] [CRTC:10]
>[  249.603624] [drm:check_crtc_state] [CRTC:14]
>[  249.603626] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[  249.603628] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[  249.603629] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  249.603630] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[  249.603632] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[  249.603633] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  249.603637] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[  249.603639] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  249.603640] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  249.603649] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[  249.603650] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  249.603651] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  249.611050] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
>[  249.611053] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0
>[  249.611055] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  249.611057] [drm:intel_crtc_set_config] [CRTC:10] [NOFB]
>[  249.611059] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0
>[  249.611061] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  249.611062] [drm:intel_crtc_set_config] [CRTC:14] [NOFB]
>[  249.611064] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0
>[  249.611066] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6]
>[  250.222384] usb 1-6: new low-speed USB device number 7 using xhci_hcd
>[  250.389699] usb 1-6: New USB device found, idVendor=046d, idProduct=c077
>[  250.389702] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  250.389704] usb 1-6: Product: USB Optical Mouse
>[  250.389706] usb 1-6: Manufacturer: Logitech
>[  250.389803] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  250.391560] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0006/input/input12
>[  250.391706] hid-generic 0003:046D:C077.0006: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
>[  250.662328] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  252.569520] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[  252.569528] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  310.384417] usb 1-6: USB disconnect, device number 7
>[  311.904183] usb 1-6: new low-speed USB device number 8 using xhci_hcd
>[  312.071434] usb 1-6: New USB device found, idVendor=046d, idProduct=c077
>[  312.071437] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  312.071439] usb 1-6: Product: USB Optical Mouse
>[  312.071441] usb 1-6: Manufacturer: Logitech
>[  312.071528] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[  312.073313] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0007/input/input13
>[  312.073474] hid-generic 0003:046D:C077.0007: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0

Actions: View

Attachments on bug 75789: 95144 | 100073 | 102041 | 102182 | 102227

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.