Attachment 104608 Details for Bug 82603 – dmesg

dmesg

pm_rpm_cursor.dmesg (text/plain), 118.67 KB, created by Guo Jinxian on 2014-08-14 08:26:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-08-14 08:26:48 UTC

Size: 118.67 KB

patch

obsolete

>[    0.000000] BIOS-e820: [mem 0x00000000cade7000-0x00000000cafe6fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000cafe7000-0x00000000caffefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012dffffff] usable
>[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>[    0.000000] SMBIOS 2.6 present.
>[    0.000000] DMI: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 080000000 mask FC0000000 write-back
>[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
>[    0.000000]   3 base 0C8000000 mask FFC000000 write-back
>[    0.000000]   4 base 0CB000000 mask FFF000000 uncachable
>[    0.000000]   5 base 100000000 mask FE0000000 write-back
>[    0.000000]   6 base 120000000 mask FF0000000 write-back
>[    0.000000]   7 base 12E000000 mask FFE000000 uncachable
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
>[    0.000000] found SMP MP-table at [mem 0x000f2110-0x000f211f] mapped at [c00f2110]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x033fffff]
>[    0.000000] Base memory trampoline at [c0096000] 96000 size 16384
>[    0.000000] reserving inaccessible SNB gfx pages
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
>[    0.000000]  [mem 0x37000000-0x373fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
>[    0.000000]  [mem 0x30000000-0x36ffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
>[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
>[    0.000000]  [mem 0x00400000-0x1fffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x20200000-0x2fffffff]
>[    0.000000]  [mem 0x20200000-0x203fffff] page 4k
>[    0.000000]  [mem 0x20400000-0x2fffffff] page 2M
>[    0.000000] BRK [0x02fc4000, 0x02fc4fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
>[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
>[    0.000000] BRK [0x02fc5000, 0x02fc5fff] PGTABLE
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x000FE300 000024 (v02 DELL  )
>[    0.000000] ACPI: XSDT 0xCAFFDE18 000064 (v01 DELL   CBX3     06222004 MSFT 00010013)
>[    0.000000] ACPI: FACP 0xCAF87D98 0000F4 (v04 DELL   CBX3     06222004 MSFT 00010013)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xCAFE4E40/0x00000000CAFE4D40, using 32-bit address (20140424/tbfadt-283)
>[    0.000000] ACPI: DSDT 0xCAF71018 007485 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
>[    0.000000] ACPI: FACS 0xCAFE4E40 000040
>[    0.000000] ACPI: APIC 0xCAFFCF18 0000CC (v02 DELL   CBX3     06222004 MSFT 00010013)
>[    0.000000] ACPI: MCFG 0xCAFE5D18 00003C (v01 DELL   SNDYBRDG 06222004 MSFT 00000097)
>[    0.000000] ACPI: HPET 0xCAFE5C98 000038 (v01 A M I   PCHHPET 06222004 AMI. 00000003)
>[    0.000000] ACPI: BOOT 0xCAFE5C18 000028 (v01 DELL   CBX3     06222004 AMI  00010013)
>[    0.000000] ACPI: SSDT 0xCAF7E018 000804 (v01 PmRef  Cpu0Ist  00003000 INTL 20090903)
>[    0.000000] ACPI: SSDT 0xCAF7D018 000996 (v01 PmRef  CpuPm    00003000 INTL 20090903)
>[    0.000000] ACPI: SLIC 0xCAF88A18 000176 (v03 DELL   CBX3     06222004 MSFT 00010013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 2360MB HIGHMEM available.
>[    0.000000] 887MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 377fe000
>[    0.000000]   low ram: 0 - 377fe000
>[    0.000000] BRK [0x02fc6000, 0x02fc6fff] PGTABLE
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
>[    0.000000]   HighMem  [mem 0x377fe000-0xcaffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
>[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
>[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
>[    0.000000]   node   0: [mem 0x40200000-0xcaa7efff]
>[    0.000000]   node   0: [mem 0xcaac3000-0xcadb6fff]
>[    0.000000]   node   0: [mem 0xcafff000-0xcaffffff]
>[    0.000000] On node 0 totalpages: 829709
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3993 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1744 pages used for memmap
>[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 4721 pages used for memmap
>[    0.000000]   HighMem zone: 602998 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] Reserving Intel graphics stolen memory at 0xcba00000-0xcf9fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: 16 Processors exceeds NR_CPUS limit of 8
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
>[    0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 13 pages/cpu @f5e04000 s30208 r0 d23040 u53248
>[    0.000000] pcpu-alloc: s30208 r0 d23040 u53248 alloc=13*4096
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 827933
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_08_14/drm-intel-nightly/da31e7c60be217316278a055dd3f91c33913270f/bzImage_i386 root=/dev/sda3 drm.debug=0xe modules_path=kernels//nightly_parents/2014_08_14/drm-intel-nightly/da31e7c60be217316278a055dd3f91c33913270f/modules_i386/lib/modules/3.16.0_drm-intel-nightly_da31e7_20140814+ kexec_jump_back_entry=0xaedec698
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Initializing HighMem for node 0 (000377fe:000cb000)
>[    0.000000] Initializing Movable for node 0 (00000000:00000000)
>[    0.000000] Memory: 3258292K/3318836K available (7158K kernel code, 497K rwdata, 3564K rodata, 20808K init, 400K bss, 60544K reserved, 2411992K highmem)
>[    0.000000] virtual kernel memory layout:
>    fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1af8000 - 0xc2f4a000   (20808 kB)
>      .data : 0xc16fdef8 - 0xc1af6580   (4065 kB)
>      .text : 0xc1000000 - 0xc16fdef8   (7159 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] NR_IRQS:2304 nr_irqs:744 16
>[    0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 3392.226 MHz processor
>[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.45 BogoMIPS (lpj=3392226)
>[    0.000178] pid_max: default: 32768 minimum: 301
>[    0.000264] ACPI: Core revision 20140424
>[    0.003480] ACPI: All ACPI Tables successfully acquired
>[    0.003646] Security Framework initialized
>[    0.003735] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.003822] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.004047] CPU: Physical Processor ID: 0
>[    0.004138] CPU: Processor Core ID: 0
>[    0.004223] mce: CPU supports 9 MCE banks
>[    0.004311] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.004318] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>tlb_flushall_shift: 6
>[    0.004694] Freeing SMP alternatives memory: 32K (c2f4a000 - c2f52000)
>[    0.004813] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.005302] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.015392] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
>[    0.015626] TSC deadline timer enabled
>[    0.015641] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
>[    0.015950] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
>[    0.016083] ... version:                3
>[    0.016165] ... bit width:              48
>[    0.016247] ... generic registers:      4
>[    0.016330] ... value mask:             0000ffffffffffff
>[    0.016413] ... max period:             0000ffffffffffff
>[    0.016497] ... fixed-purpose events:   3
>[    0.016579] ... event mask:             000000070000000f
>[    0.016844] CPU 1 irqstacks, hard=f5916000 soft=f5920000
>[    0.016845] x86: Booting SMP configuration:
>[    0.016929] .... node  #0, CPUs:      #1
>[    0.027554] Initializing CPU#1
>[    0.028162] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.030307] CPU 2 irqstacks, hard=f5932000 soft=f5934000
>[    0.030466]  #2
>[    0.040859] Initializing CPU#2
>[    0.041630] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.043777] CPU 3 irqstacks, hard=f5952000 soft=f5954000
>[    0.043935]  #3
>[    0.054328] Initializing CPU#3
>[    0.055099] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.057244] CPU 4 irqstacks, hard=f5986000 soft=f5988000
>[    0.057403]  #4
>[    0.067856] Initializing CPU#4
>[    0.068575] CPU4: Thermal LVT vector (0xfa) already installed
>[    0.070720] CPU 5 irqstacks, hard=f5992000 soft=f5994000
>[    0.070879]  #5
>[    0.081271] Initializing CPU#5
>[    0.082042] CPU5: Thermal LVT vector (0xfa) already installed
>[    0.084188] CPU 6 irqstacks, hard=f59a6000 soft=f59b8000
>[    0.084349]  #6
>[    0.094741] Initializing CPU#6
>[    0.095512] CPU6: Thermal LVT vector (0xfa) already installed
>[    0.097655] CPU 7 irqstacks, hard=f59c2000 soft=f59c4000
>[    0.097814]  #7
>[    0.108207] Initializing CPU#7
>[    0.108978] CPU7: Thermal LVT vector (0xfa) already installed
>[    0.111080] x86: Booted up 1 node, 8 CPUs
>[    0.111321] smpboot: Total of 8 processors activated (54275.61 BogoMIPS)
>[    0.116894] devtmpfs: initialized
>[    0.117230] PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes)
>[    0.117398] reboot: Dell OptiPlex 990 series board detected. Selecting PCI-method for reboots.
>[    0.117684] xor: automatically using best checksumming function:
>[    0.127782]    avx       : 25764.000 MB/sec
>[    0.127890] RTC time: 16:08:20, date: 08/14/14
>[    0.128011] NET: Registered protocol family 16
>[    0.128237] cpuidle: using governor ladder
>[    0.129587] cpuidle: using governor menu
>[    0.129755] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.129888] ACPI: bus type PCI registered
>[    0.130024] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.130159] PCI: not using MMCONFIG
>[    0.130277] PCI: PCI BIOS revision 2.10 entry at 0xfce72, last bus=3
>[    0.130363] PCI: Using configuration type 1 for base access
>[    0.130452] dmi type 0xB1 record - unknown flag
>[    0.150617] raid6: mmxx1     5781 MB/s
>[    0.167641] raid6: mmxx2     6101 MB/s
>[    0.184659] raid6: sse1x1    4863 MB/s
>[    0.201678] raid6: sse1x2    5906 MB/s
>[    0.218692] raid6: sse2x1    9796 MB/s
>[    0.235709] raid6: sse2x2   11917 MB/s
>[    0.235791] raid6: using algorithm sse2x2 (11917 MB/s)
>[    0.235875] raid6: using ssse3x1 recovery algorithm
>[    0.235989] ACPI: Added _OSI(Module Device)
>[    0.236073] ACPI: Added _OSI(Processor Device)
>[    0.236156] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.236239] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.242748] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.259098] ACPI: Dynamic OEM Table Load:
>[    0.259249] ACPI: SSDT 0xF586A000 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20090903)
>[    0.265043] ACPI: Dynamic OEM Table Load:
>[    0.265192] ACPI: SSDT 0xF5826400 000303 (v01 PmRef  ApIst    00003000 INTL 20090903)
>[    0.270965] ACPI: Dynamic OEM Table Load:
>[    0.271113] ACPI: SSDT 0xF5806E00 000119 (v01 PmRef  ApCst    00003000 INTL 20090903)
>[    0.277641] ACPI: Interpreter enabled
>[    0.277729] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
>[    0.277931] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
>[    0.278137] ACPI: (supports S0 S3 S4 S5)
>[    0.278220] ACPI: Using IOAPIC for interrupt routing
>[    0.278314] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.278664] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
>[    0.278797] PCI: Using MMCONFIG for extended config space
>[    0.278896] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.291696] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.291785] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.291942] \_SB_.PCI0:_OSC invalid UUID
>[    0.291942] _OSC request data:1 1f 0 
>[    0.291945] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.292396] PCI host bridge to bus 0000:00
>[    0.292480] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.292565] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.292651] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.292737] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.292824] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
>[    0.292912] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
>[    0.293003] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
>[    0.293067] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
>[    0.293075] pci 0000:00:02.0: reg 0x10: [mem 0xe0c00000-0xe0ffffff 64bit]
>[    0.293080] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.293083] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.293160] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>[    0.293178] pci 0000:00:16.0: reg 0x10: [mem 0xe1ab0000-0xe1ab000f 64bit]
>[    0.293237] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.293293] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
>[    0.293308] pci 0000:00:16.3: reg 0x10: [io  0x30e0-0x30e7]
>[    0.293316] pci 0000:00:16.3: reg 0x14: [mem 0xe1a90000-0xe1a90fff]
>[    0.293432] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>[    0.293448] pci 0000:00:19.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff]
>[    0.293456] pci 0000:00:19.0: reg 0x14: [mem 0xe1a80000-0xe1a80fff]
>[    0.293463] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.293520] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.302110] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.302248] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>[    0.302267] pci 0000:00:1a.0: reg 0x10: [mem 0xe1a70000-0xe1a703ff]
>[    0.302350] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.302390] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.302508] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>[    0.302523] pci 0000:00:1b.0: reg 0x10: [mem 0xe1a60000-0xe1a63fff 64bit]
>[    0.302590] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.302619] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.302739] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>[    0.302876] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.302917] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.303039] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
>[    0.303178] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.303218] pci 0000:00:1c.2: System wakeup disabled by ACPI
>[    0.303340] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>[    0.303359] pci 0000:00:1d.0: reg 0x10: [mem 0xe1a50000-0xe1a503ff]
>[    0.303442] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.303481] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.303594] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>[    0.303660] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.303776] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
>[    0.303924] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
>[    0.303941] pci 0000:00:1f.2: reg 0x10: [io  0x30d0-0x30d7]
>[    0.303949] pci 0000:00:1f.2: reg 0x14: [io  0x30c0-0x30c3]
>[    0.303956] pci 0000:00:1f.2: reg 0x18: [io  0x30b0-0x30b7]
>[    0.303963] pci 0000:00:1f.2: reg 0x1c: [io  0x30a0-0x30a3]
>[    0.303970] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.303977] pci 0000:00:1f.2: reg 0x24: [mem 0xe1a40000-0xe1a407ff]
>[    0.304017] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.304072] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>[    0.304088] pci 0000:00:1f.3: reg 0x10: [mem 0xe1a30000-0xe1a300ff 64bit]
>[    0.304106] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
>[    0.304238] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.304411] pci 0000:00:1c.2: PCI bridge to [bus 02]
>[    0.304498] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
>[    0.304503] pci 0000:00:1c.2:   bridge window [mem 0xe1000000-0xe19fffff]
>[    0.304511] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
>[    0.304573] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
>[    0.304666] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.304667] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.304669] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.304670] pci 0000:00:1e.0:   bridge window [mem 0xcfa00000-0xfeafffff] (subtractive decode)
>[    0.304672] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
>[    0.304692] pci_bus 0000:00: on NUMA node 0
>[    0.304999] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
>[    0.305614] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
>[    0.306229] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
>[    0.306840] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.307454] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15), disabled.
>[    0.308033] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.308644] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15), disabled.
>[    0.309224] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.309855] ACPI: Enabled 2 GPEs in block 00 to 3F
>[    0.310051] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.310184] vgaarb: loaded
>[    0.310268] vgaarb: bridge control possible 0000:00:02.0
>[    0.310408] SCSI subsystem initialized
>[    0.310518] libata version 3.00 loaded.
>[    0.310544] ACPI: bus type USB registered
>[    0.310643] usbcore: registered new interface driver usbfs
>[    0.310734] usbcore: registered new interface driver hub
>[    0.310831] usbcore: registered new device driver usb
>[    0.310936] pps_core: LinuxPPS API ver. 1 registered
>[    0.311020] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.311158] PTP clock support registered
>[    0.311289] PCI: Using ACPI for IRQ routing
>[    0.311373] PCI: pci_cache_line_size set to 64 bytes
>[    0.311405] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
>[    0.311406] e820: reserve RAM buffer [mem 0xcaa7f000-0xcbffffff]
>[    0.311408] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
>[    0.311409] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
>[    0.311488] NetLabel: Initializing
>[    0.311569] NetLabel:  domain hash size = 128
>[    0.311651] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.311741] NetLabel:  unlabeled traffic allowed by default
>[    0.311908] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.312285] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.314393] Switched to clocksource hpet
>[    0.316733] pnp: PnP ACPI init
>[    0.316825] ACPI: bus type PNP registered
>[    0.316977] system 00:00: [io  0x0680-0x069f] has been reserved
>[    0.317067] system 00:00: [io  0xffff] has been reserved
>[    0.317152] system 00:00: [io  0xffff] has been reserved
>[    0.317237] system 00:00: [io  0xffff] has been reserved
>[    0.317322] system 00:00: [io  0x0400-0x0453] could not be reserved
>[    0.317419] system 00:00: [io  0x0458-0x047f] has been reserved
>[    0.317505] system 00:00: [io  0x0500-0x057f] has been reserved
>[    0.317590] system 00:00: [io  0x164e-0x164f] has been reserved
>[    0.317677] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.317699] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.317732] system 00:02: [io  0x0454-0x0457] has been reserved
>[    0.317825] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.318004] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.318120] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.318211] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.318298] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.318384] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.318487] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.318573] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.318660] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.318747] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.318834] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.318922] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.319008] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.319039] system 00:05: [mem 0x20000000-0x201fffff] has been reserved
>[    0.319130] system 00:05: [mem 0x40000000-0x401fffff] has been reserved
>[    0.319218] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.319281] pnp: PnP ACPI: found 6 devices
>[    0.319364] ACPI: bus type PNP unregistered
>[    0.355833] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.355933] pci 0000:00:1c.2: PCI bridge to [bus 02]
>[    0.356020] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
>[    0.356110] pci 0000:00:1c.2:   bridge window [mem 0xe1000000-0xe19fffff]
>[    0.356200] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
>[    0.356339] pci 0000:00:1e.0: PCI bridge to [bus 03]
>[    0.356447] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.356448] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.356449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.356451] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
>[    0.356452] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
>[    0.356454] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>[    0.356455] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe19fffff]
>[    0.356456] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
>[    0.356458] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
>[    0.356459] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
>[    0.356460] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.356462] pci_bus 0000:03: resource 7 [mem 0xcfa00000-0xfeafffff]
>[    0.356463] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
>[    0.356479] NET: Registered protocol family 2
>[    0.356676] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>[    0.356770] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.356864] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.356956] TCP: reno registered
>[    0.357038] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.357125] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.357240] NET: Registered protocol family 1
>[    0.357373] RPC: Registered named UNIX socket transport module.
>[    0.357477] RPC: Registered udp transport module.
>[    0.357562] RPC: Registered tcp transport module.
>[    0.357645] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.357750] pci 0000:00:02.0: Boot video device
>[    0.358005] PCI: CLS 64 bytes, default 64
>[    0.699561] Simple Boot Flag at 0xf3 set to 0x1
>[    0.699932] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
>[    0.700661] futex hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.700795] audit: initializing netlink subsys (disabled)
>[    0.700886] audit: type=2000 audit(1408032500.682:1): initialized
>[    0.701203] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.702510] VFS: Disk quotas dquot_6.5.2
>[    0.702637] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.703127] NFS: Registering the id_resolver key type
>[    0.703217] Key type id_resolver registered
>[    0.703300] Key type id_legacy registered
>[    0.703385] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.703534] fuse init (API version 7.23)
>[    0.703703] msgmni has been set to 1652
>[    0.703971] bounce: pool size: 64 pages
>[    0.704059] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.704196] io scheduler noop registered
>[    0.704279] io scheduler deadline registered
>[    0.704401] io scheduler cfq registered (default)
>[    0.704840] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.705237] Monitor-Mwait will be used to enter C-1 state
>[    0.705240] Monitor-Mwait will be used to enter C-2 state
>[    0.705243] Monitor-Mwait will be used to enter C-3 state
>[    0.705250] ACPI: acpi_idle registered with cpuidle
>[    0.707219] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.727939] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.748803] 0000:00:16.3: ttyS1 at I/O 0x30e0 (irq = 17, base_baud = 115200) is a 16550A
>[    0.749153] Non-volatile memory driver v1.3
>[    0.749254] Linux agpgart interface v0.103
>[    0.750314] brd: module loaded
>[    0.750484] Loading iSCSI transport class v2.0-870.
>[    0.752023] iscsi: registered transport (tcp)
>[    0.752252] Adaptec aacraid driver 1.2-0[30300]-ms
>[    0.752358] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.752498] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
>[    0.752697] iscsi: registered transport (qla4xxx)
>[    0.752804] QLogic iSCSI HBA Driver
>[    0.752895] Emulex LightPulse Fibre Channel SCSI driver 10.2.8001.0.
>[    0.752981] Copyright(c) 2004-2014 Emulex.  All rights reserved.
>[    0.753149] DC390: clustering now enabled by default. If you get problems load
>[    0.753303]        with "disable_clustering=1" and report to maintainers
>[    0.753409] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.753535] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
>[    0.753717] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.753817] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.753932] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.754048] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.754242] SCSI Media Changer driver v0.25 
>[    0.754390] ahci 0000:00:1f.2: version 3.0
>[    0.754476] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
>[    0.764639] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x6 impl SATA mode
>[    0.764787] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
>[    0.767050] scsi0 : ahci
>[    0.767273] scsi1 : ahci
>[    0.767488] scsi2 : ahci
>[    0.767667] scsi3 : ahci
>[    0.767828] scsi4 : ahci
>[    0.767988] scsi5 : ahci
>[    0.768102] ata1: DUMMY
>[    0.768188] ata2: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40180 irq 40
>[    0.768320] ata3: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40200 irq 40
>[    0.768451] ata4: DUMMY
>[    0.768531] ata5: DUMMY
>[    0.768622] ata6: DUMMY
>[    0.769313] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
>[    0.769620] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    0.769968] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.770064] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.770158] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.770252] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.770349] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.770441] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.770641] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.770788] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    0.971627] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    0.971766] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:2b:cb:94:8d:17
>[    0.971899] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    0.972015] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: E041FF-0FF
>[    0.972115] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    0.972214] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    0.972320] usbcore: registered new interface driver catc
>[    0.972422] usbcore: registered new interface driver kaweth
>[    0.972529] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    0.972665] usbcore: registered new interface driver pegasus
>[    0.972782] usbcore: registered new interface driver rtl8150
>[    0.972884] usbcore: registered new interface driver asix
>[    0.972986] usbcore: registered new interface driver ax88179_178a
>[    0.973087] usbcore: registered new interface driver cdc_ether
>[    0.973188] usbcore: registered new interface driver dm9601
>[    0.973290] usbcore: registered new interface driver gl620a
>[    0.973391] usbcore: registered new interface driver net1080
>[    0.973490] usbcore: registered new interface driver plusb
>[    0.973589] usbcore: registered new interface driver rndis_host
>[    0.973692] usbcore: registered new interface driver cdc_subset
>[    0.973805] usbcore: registered new interface driver zaurus
>[    0.973911] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    0.974067] usbcore: registered new interface driver cdc_ncm
>[    0.974229] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.974324] ehci-pci: EHCI PCI platform driver
>[    0.974486] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.974601] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.974760] ehci-pci 0000:00:1a.0: debug port 2
>[    0.978753] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.978764] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1a70000
>[    0.984734] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.984866] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.984953] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.985085] usb usb1: Product: EHCI Host Controller
>[    0.985168] usb usb1: Manufacturer: Linux 3.16.0_drm-intel-nightly_da31e7_20140814+ ehci_hcd
>[    0.985301] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.985512] hub 1-0:1.0: USB hub found
>[    0.985605] hub 1-0:1.0: 3 ports detected
>[    0.985841] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.986055] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.986209] ehci-pci 0000:00:1d.0: debug port 2
>[    0.990170] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.990181] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1a50000
>[    0.995766] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.995895] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.995982] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.996114] usb usb2: Product: EHCI Host Controller
>[    0.996197] usb usb2: Manufacturer: Linux 3.16.0_drm-intel-nightly_da31e7_20140814+ ehci_hcd
>[    0.996331] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.996550] hub 2-0:1.0: USB hub found
>[    0.996652] hub 2-0:1.0: 3 ports detected
>[    0.996835] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.996936] ohci-pci: OHCI PCI platform driver
>[    0.997041] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.997173] usbcore: registered new interface driver usb-storage
>[    0.997308] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    1.000259] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.000347] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.000542] mousedev: PS/2 mouse device common for all mice
>[    1.000736] rtc_cmos 00:01: RTC can wake from S4
>[    1.000940] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    1.001056] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>[    1.001199] i2c /dev entries driver
>[    1.001303] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.001571] usbcore: registered new interface driver usbhid
>[    1.001747] usbhid: USB HID core driver
>[    1.001897] TCP: cubic registered
>[    1.001979] Initializing XFRM netlink socket
>[    1.002064] NET: Registered protocol family 17
>[    1.002162] Key type dns_resolver registered
>[    1.002495] Using IPI No-Shortcut mode
>[    1.002659] registered taskstats version 1
>[    1.003046] Btrfs loaded
>[    1.003356]   Magic number: 10:824:135
>[    1.003442] block ram0: hash matches
>[    1.003580] PM: Hibernation image not present or could not be loaded.
>[    1.003590] Warning: unable to open an initial console.
>[    1.073769] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.073885] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.075539] ata3.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
>[    1.075641] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.076406] ata2.00: ATAPI: PLDS DVD+/-RW DH-16ABS, PD11, max UDMA/100
>[    1.077241] ata2.00: configured for UDMA/100
>[    1.083882] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DH-16ABS PD11 PQ: 0 ANSI: 5
>[    1.085463] ata3.00: configured for UDMA/133
>[    1.109842] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.109987] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.110207] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.110273] sr 1:0:0:0: Attached scsi generic sg0 type 5
>[    1.110605] scsi 2:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
>[    1.110971] sd 2:0:0:0: Attached scsi generic sg1 type 0
>[    1.110983] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>[    1.111200] sd 2:0:0:0: [sda] Write Protect is off
>[    1.111202] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.111228] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.111672]  sda: sda1 sda2 sda3
>[    1.112131] sd 2:0:0:0: [sda] Attached SCSI disk
>[    1.114198] Freeing unused kernel memory: 20808K (c1af8000 - c2f4a000)
>[    1.136845] dracut: dracut-018-35.git20120510.fc17
>[    1.154958] udevd[1332]: starting version 182
>[    1.164147] [drm] Initialized drm 1.1.0 20060810
>[    1.164778] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    1.165074] ACPI: Power Button [PWRB]
>[    1.165253] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.165469] ACPI: Power Button [PWRF]
>[    1.167638] [drm:i915_dump_device_info] i915 device info: gen=6, pciid=0x0102 rev=0x09 flags=need_gfx_hws,has_fbc,has_hotplug,has_llc,
>[    1.167651] [drm:intel_detect_pch] Found CougarPoint PCH
>[    1.167706] [drm] Memory usable by graphics device = 2048M
>[    1.167841] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.167843] [drm:i915_gem_gtt_init] GTT stolen size = 64M
>[    1.167845] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    1.167846] [drm] Replacing VGA console driver
>[    1.169076] Console: switching to colour dummy device 80x25
>[    1.169396] [drm:intel_opregion_setup] graphic opregion physical addr: 0xcaf7a018
>[    1.169402] [drm:intel_opregion_setup] SWSCI supported
>[    1.174866] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
>[    1.174887] i915 0000:00:02.0: irq 42 for MSI/MSI-X
>[    1.174892] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.174895] [drm] Driver supports precise vblank timestamp query.
>[    1.174897] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.174899] [drm:validate_vbt] Using VBT from OpRegion: $VBT SANDYBRIDGE-D  d
>[    1.174901] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.174902] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.174904] [drm:parse_lfp_panel_data] DRRS supported mode is seamless
>[    1.174905] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.174907] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    1.174909] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    1.174910] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 0
>[    1.174912] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.174913] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.174914] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.174916] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.174921] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.174924] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at cba00000
>[    1.174925] [drm:intel_display_power_get] enabling always-on
>[    1.174951] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
>[    1.174952] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    1.174953] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    1.174955] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    1.174956] [drm:intel_print_wm_latency] Sprite WM0 latency 7 (0.7 usec)
>[    1.174957] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    1.174958] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    1.174959] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    1.174960] [drm:intel_print_wm_latency] Cursor WM0 latency 7 (0.7 usec)
>[    1.174961] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    1.174962] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    1.174963] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    1.174964] [drm:snb_wm_latency_quirk] WM latency values increased to avoid potential underruns
>[    1.174965] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec)
>[    1.174966] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    1.174967] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    1.174969] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    1.174970] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec)
>[    1.174971] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    1.174972] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    1.174973] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    1.174974] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec)
>[    1.174975] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    1.174976] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    1.174977] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    1.174978] [drm:intel_modeset_init] 2 display pipes available.
>[    1.174987] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.175297] [drm:intel_lvds_init] LVDS is not present in VBT
>[    1.175330] [drm:intel_crt_reset] pch crt adpa set to 0x80f40010
>[    1.175362] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    1.175383] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
>[    1.175454] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[    1.175470] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: enabled
>[    1.175472] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled
>[    1.175477] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 1, on 1
>[    1.175481] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
>[    1.175485] [drm:intel_modeset_readout_hw_state] [ENCODER:15:DAC-15] hw state readout: enabled, pipe A
>[    1.175487] [drm:intel_modeset_readout_hw_state] [ENCODER:16:TMDS-16] hw state readout: disabled, pipe A
>[    1.175489] [drm:intel_modeset_readout_hw_state] [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A
>[    1.175491] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:VGA-1] hw state readout: enabled
>[    1.175493] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:HDMI-A-1] hw state readout: disabled
>[    1.175496] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:DP-1] hw state readout: disabled
>[    1.175499] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe A
>[    1.175500] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.175501] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.175503] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 659903, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64
>[    1.175504] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.175506] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.175507] [drm:intel_dump_pipe_config] requested mode:
>[    1.175508] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    1.175509] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.175511] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
>[    1.175512] [drm:intel_dump_crtc_timings] crtc timings: 28200 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6
>[    1.175513] [drm:intel_dump_pipe_config] port clock: 28200
>[    1.175514] [drm:intel_dump_pipe_config] pipe src size: 720x400
>[    1.175516] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.175517] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled
>[    1.175518] [drm:intel_dump_pipe_config] ips: 0
>[    1.175519] [drm:intel_dump_pipe_config] double wide: 0
>[    1.175520] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.175521] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    1.175523] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    1.175525] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B
>[    1.175526] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.175527] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.175528] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.175529] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.175531] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.175532] [drm:intel_dump_pipe_config] requested mode:
>[    1.175533] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.175534] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.175535] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.175537] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.175538] [drm:intel_dump_pipe_config] port clock: 0
>[    1.175539] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.175540] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.175541] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.175542] [drm:intel_dump_pipe_config] ips: 0
>[    1.175543] [drm:intel_dump_pipe_config] double wide: 0
>[    1.175546] [drm:intel_connector_check_state] [CONNECTOR:14:VGA-1]
>[    1.175549] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[    1.175552] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    1.175554] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[    1.175556] [drm:check_crtc_state] [CRTC:7]
>[    1.175565] [drm:check_crtc_state] [CRTC:12]
>[    1.175566] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.175569] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.175575] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 3200, size 0x139000
>[    1.175576] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=139000
>[    1.175578] [drm:i915_pages_create_for_stolen] offset=0x0, size=1282048
>[    1.175580] [drm:intel_alloc_plane_obj] plane fb obj f4d41800
>[    1.175582] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 139000
>[    1.175583] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [139000, 7ffff000]
>[    1.177092] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    1.177333] [drm:i915_gem_context_init] HW context support initialized
>[    1.177338] [drm:init_status_page] render ring hws offset: 0x7fff2000
>[    1.177424] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00159000
>[    1.177428] [drm:init_status_page] bsd ring hws offset: 0x0015a000
>[    1.177465] [drm:init_status_page] blitter ring hws offset: 0x0017b000
>[    1.177524] [drm:gen6_check_mch_setup] Wrong MCH_SSKPD value: 0x16040307 This can cause underruns.
>[    1.177544] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:VGA-1]
>[    1.177545] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[    1.177547] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40010
>[    1.186845] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1
>[    1.186849] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.200052] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.200062] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:VGA-1] probed modes :
>[    1.200075] [drm:drm_mode_debug_printmodeline] Modeline 25:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    1.200077] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.200079] [drm:drm_mode_debug_printmodeline] Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.200081] [drm:drm_mode_debug_printmodeline] Modeline 26:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.200082] [drm:drm_mode_debug_printmodeline] Modeline 33:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.200084] [drm:drm_mode_debug_printmodeline] Modeline 34:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.200086] [drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.200087] [drm:drm_mode_debug_printmodeline] Modeline 28:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.200089] [drm:drm_mode_debug_printmodeline] Modeline 29:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.200091] [drm:drm_mode_debug_printmodeline] Modeline 30:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.200092] [drm:drm_mode_debug_printmodeline] Modeline 31:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.200093] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:HDMI-A-1]
>[    1.200095] [drm:intel_hdmi_detect] [CONNECTOR:17:HDMI-A-1]
>[    1.200297] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.200300] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.200303] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:HDMI-A-1] disconnected
>[    1.200306] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[    1.200308] [drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[    1.200312] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] disconnected
>[    1.200314] [drm:drm_setup_crtcs] 
>[    1.200317] [drm:drm_enable_connectors] connector 14 enabled? yes
>[    1.200319] [drm:drm_enable_connectors] connector 17 enabled? no
>[    1.200321] [drm:drm_enable_connectors] connector 22 enabled? no
>[    1.200324] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1
>[    1.200326] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1
>[    1.200329] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:7]: 1920x1080
>[    1.200331] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.200333] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.200343] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 7
>[    1.200345] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.200346] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    1.200348] [drm:i915_pages_create_for_stolen] offset=0x139000, size=8294400
>[    1.201212] [drm:intelfb_create] allocated 1920x1080 fb: 0x0019d000, bo f5009c00
>[    1.201301] fbcon: inteldrmfb (fb0) is primary device
>[    1.201327] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[    1.201329] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.201330] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.201331] [drm:drm_mode_debug_printmodeline] Modeline 36:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    1.201332] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
>[    1.201333] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.201334] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.201336] [drm:connected_sink_compute_bpp] [CONNECTOR:14:VGA-1] checking for sink bpp constrains
>[    1.201337] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
>[    1.201338] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    1.201338] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
>[    1.201339] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.201339] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.201341] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
>[    1.201342] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.201342] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.201343] [drm:intel_dump_pipe_config] requested mode:
>[    1.201344] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    1.201345] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.201346] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    1.201347] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
>[    1.201347] [drm:intel_dump_pipe_config] port clock: 148500
>[    1.201348] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.201349] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.201349] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.201350] [drm:intel_dump_pipe_config] ips: 0
>[    1.201350] [drm:intel_dump_pipe_config] double wide: 0
>[    1.228867] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 7
>[    1.228872] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[    1.229282] [drm:intel_update_fbc] no output, disabling
>[    1.229305] [drm:intel_get_shared_dpll] CRTC:7 dropping existing PCH DPLL A
>[    1.229306] [drm:intel_get_shared_dpll] CRTC:7 allocated PCH DPLL A
>[    1.229306] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
>[    1.229307] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
>[    1.230657] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x700
>[    1.230658] [drm:gen6_fdi_link_train] FDI train 1 done.
>[    1.231313] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600
>[    1.231314] [drm:gen6_fdi_link_train] FDI train 2 done.
>[    1.231315] [drm:gen6_fdi_link_train] FDI train done.
>[    1.231317] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 7
>[    1.231318] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
>[    1.233190] [drm:ironlake_update_primary_plane] Writing base 0019D000 00000000 0 0 7680
>[    1.233191] [drm:intel_update_fbc] disabled per chip default
>[    1.233194] [drm:intel_connector_check_state] [CONNECTOR:14:VGA-1]
>[    1.233197] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[    1.233198] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[    1.233200] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[    1.233201] [drm:check_crtc_state] [CRTC:7]
>[    1.233210] [drm:check_crtc_state] [CRTC:12]
>[    1.233211] [drm:check_shared_dpll_state] PCH DPLL A
>[    1.233214] [drm:check_shared_dpll_state] PCH DPLL B
>[    1.233220] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    1.233222] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    1.233223] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.233225] Console: switching to colour frame buffer device 240x67
>[    1.233232] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[    1.233233] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    1.233234] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.239083] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    1.239113] i915 0000:00:02.0: registered panic notifier
>[    1.244035] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.244212] acpi device:01: registered as cooling_device8
>[    1.244298] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    1.244409] [drm] Initialized i915 1.6.0 20140808 for 0000:00:02.0 on minor 0
>[    1.246982] dracut: Starting plymouth daemon
>[    1.251817] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[    1.251819] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    1.251820] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.262095] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[    1.262097] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    1.262098] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.287884] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.303719] parport0: PC-style at 0x378 (0x778)
>[    1.306956] ACPI Warning: 
>[    1.306983] SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140424/utaddress-258)
>[    1.307053] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.307123] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
>[    1.307217] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.307288] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
>[    1.307379] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.307445] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
>[    1.307535] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.307602] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    1.308782] ACPI Warning: 
>[    1.308805] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[    1.308806] SystemIO range 0x00003040-0x0000305f conflicts with OpRegion 0x00003040-0x0000304f (\_SB_.PCI0.SBUS.SMBI)
>[    1.308808]  (20140424/utaddress-258)
>[    1.308809] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.308961] input: PC Speaker as /devices/platform/pcspkr/input/input6
>[    1.312633] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    1.317312] iTCO_vendor_support: vendor-support=0
>[    1.317453] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    1.317505] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
>[    1.317646] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    1.317702] ppdev: user-space parallel port driver
>[    1.318479] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[    1.318481] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    1.318482] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.318818] sound hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
>[    1.319360] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
>[    1.319362] sound hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[    1.319364] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    1.319365] sound hdaudioC0D0:    mono: mono_out=0x0
>[    1.319366] sound hdaudioC0D0:    inputs:
>[    1.319368] sound hdaudioC0D0:      Rear Mic=0x19
>[    1.319369] sound hdaudioC0D0:      Front Mic=0x18
>[    1.325532] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
>[    1.325533] EXT4-fs (sda3): write access will be enabled during recovery
>[    1.347538] EXT4-fs (sda3): recovery complete
>[    1.348018] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    1.367273] dracut: Checking ext4: /dev/sda3
>[    1.369208] dracut: issuing e2fsck -a  /dev/sda3
>[    1.375294] dracut: /dev/sda3: clean, 771814/6946816 files, 8378873/27768832 blocks
>[    1.377315] dracut: Remounting /dev/sda3 with -o ro
>[    1.383691] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    1.389217] dracut: Mounted root filesystem /dev/sda3
>[    1.399040] device-mapper: uevent: version 1.0.3
>[    1.400937] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    1.402329] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.402331] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.402483] hub 1-1:1.0: USB hub found
>[    1.402576] hub 1-1:1.0: 6 ports detected
>[    1.425088]  [PCSPP,TRISTATE]
>[    1.426905] parport0: irq 7 detected
>[    1.505026] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.516341] dracut: Switching root
>[    1.565595] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    1.577183] systemd[1]: Failed to insert module 'ipv6'
>[    1.579215] systemd[1]: Set hostname to <x-sgb4>.
>[    1.582338] random: systemd urandom read with 95 bits of entropy available
>[    1.621456] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.623266] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.625369] hub 2-1:1.0: USB hub found
>[    1.627344] hub 2-1:1.0: 8 ports detected
>[    1.633841] systemd[1]: [/usr/lib/systemd/system/rtkit-daemon.service:32] Unknown lvalue 'ControlGroup' in section 'Service'
>[    1.651595] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    1.653470] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    1.655294] systemd[1]: Starting Replay Read-Ahead Data...
>[    1.659184] systemd[1]: Starting Collect Read-Ahead Data...
>[    1.661823] systemd-readahead[2453]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    1.664939] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    1.665590] systemd-readahead[2454]: Failed to create fanotify object: Function not implemented
>[    1.670531] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    1.672327] systemd[1]: Starting Delayed Shutdown Socket.
>[    1.675920] systemd[1]: Listening on Delayed Shutdown Socket.
>[    1.677659] systemd[1]: Starting Encrypted Volumes.
>[    1.681158] systemd[1]: Reached target Encrypted Volumes.
>[    1.682808] systemd[1]: Starting Journal Socket.
>[    1.686192] systemd[1]: Listening on Journal Socket.
>[    1.687813] systemd[1]: Started Create list of required static device nodes for the current kernel.
>[    1.689449] systemd[1]: Starting Create static device nodes in /dev...
>[    1.692918] systemd[1]: Mounting Debug File System...
>[    1.696421] systemd[1]: Mounting POSIX Message Queue File System...
>[    1.699927] systemd[1]: Mounting RPC Pipe File System...
>[    1.701507] tsc: Refined TSC clocksource calibration: 3392.293 MHz
>[    1.704092] usb 1-1.3: new low-speed USB device number 3 using ehci-pci
>[    1.707893] systemd[1]: Mounting RPC Pipe File System...
>[    1.711682] systemd[1]: Starting Journal Service...
>[    1.717210] systemd[1]: Started Journal Service.
>[    1.722701] random: nonblocking pool is initialized
>[    1.722834] systemd-journald[2466]: Vacuuming done, freed 0 bytes
>[    1.780578] systemd-udevd[2890]: starting version 208
>[    1.797916] usb 1-1.3: New USB device found, idVendor=413c, idProduct=2107
>[    1.797918] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.797919] usb 1-1.3: Product: Dell USB Entry Keyboard
>[    1.797921] usb 1-1.3: Manufacturer: DELL
>[    1.804657] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2107.0001/input/input7
>[    1.804762] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1a.0-1.3/input0
>[    1.812483] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[    1.812487] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    1.812488] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.836477] EXT4-fs (sda3): re-mounted. Opts: (null)
>[    1.877026] Adding 4095996k swap on /dev/sda2.  Priority:-1 extents:1 across:4095996k SS
>[    1.879608] [drm:i915_gem_open] 
>[    1.879638] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[    1.879658] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    1.879660] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.879662] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    1.879664] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    1.879665] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.879674] [drm:i915_gem_open] 
>[    1.879683] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[    1.879685] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    1.879686] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.879687] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    1.879689] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    1.879690] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    1.879701] [drm:i915_gem_open] 
>[    1.879724] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[    1.879726] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[    1.879729] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[    1.879731] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:VGA-1]
>[    1.879733] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[    1.879737] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1
>[    1.879738] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.892812] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.892823] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:VGA-1] probed modes :
>[    1.892825] [drm:drm_mode_debug_printmodeline] Modeline 25:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    1.892827] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.892829] [drm:drm_mode_debug_printmodeline] Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.892831] [drm:drm_mode_debug_printmodeline] Modeline 26:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.892833] [drm:drm_mode_debug_printmodeline] Modeline 33:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.892834] [drm:drm_mode_debug_printmodeline] Modeline 34:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.892836] [drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.892838] [drm:drm_mode_debug_printmodeline] Modeline 28:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.892839] [drm:drm_mode_debug_printmodeline] Modeline 29:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.892841] [drm:drm_mode_debug_printmodeline] Modeline 30:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.892843] [drm:drm_mode_debug_printmodeline] Modeline 31:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.892846] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[    1.898742] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[    1.898746] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:HDMI-A-1]
>[    1.898748] [drm:intel_hdmi_detect] [CONNECTOR:17:HDMI-A-1]
>[    1.898907] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.898909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.898910] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:HDMI-A-1] disconnected
>[    1.898914] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[    1.898915] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:HDMI-A-1]
>[    1.898916] [drm:intel_hdmi_detect] [CONNECTOR:17:HDMI-A-1]
>[    1.899072] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.899073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.899075] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:HDMI-A-1] disconnected
>[    1.899078] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[    1.899080] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[    1.899081] [drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[    1.899084] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] disconnected
>[    1.899085] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[    1.899086] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[    1.899087] [drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[    1.899089] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] disconnected
>[    1.899109] [drm:drm_mode_addfb] [FB:24]
>[    1.903527] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    1.952028] audit: type=1305 audit(1408032501.932:2): audit_pid=3387 old=0 auid=4294967295 ses=4294967295 res=1
>[    1.956490] alsactl[3404]: segfault at 0 ip 4a9502ab sp bfc10d00 error 4 in libc-2.18.so[4a908000+1b8000]
>[    2.667729] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    2.703639] Switched to clocksource tsc
>[    2.721874] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.725514] [drm:gen6_enable_rps] Overclocking supported. Max: 1350MHz, Overclock max: 1350MHz
>[    2.768581] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
>[    2.799770] systemd-journald[2466]: Received request to flush runtime journal from PID 1
>[    2.833416] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[    2.833419] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    2.833421] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    2.833423] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    2.833424] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    2.833426] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    2.890615] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[    2.890618] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    2.890619] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[    5.087863] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[    5.087904] e1000e 0000:00:19.0 em1: 10/100 speed: disabling TSO
>[   38.436931] pm_rpm: executing
>[   38.436996] [drm:i915_gem_open] 
>[   38.437280] [drm:i915_gem_open] 
>[   38.437289] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.437293] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
>[   38.437298] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   38.437301] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:VGA-1]
>[   38.437303] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1
>[   38.437306] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1
>[   38.437307] [drm:intel_crt_detect] CRT detected via hotplug
>[   38.450378] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   38.450390] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:VGA-1] probed modes :
>[   38.450395] [drm:drm_mode_debug_printmodeline] Modeline 25:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   38.450406] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   38.450407] [drm:drm_mode_debug_printmodeline] Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   38.450409] [drm:drm_mode_debug_printmodeline] Modeline 26:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   38.450411] [drm:drm_mode_debug_printmodeline] Modeline 33:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   38.450412] [drm:drm_mode_debug_printmodeline] Modeline 34:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   38.450414] [drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   38.450416] [drm:drm_mode_debug_printmodeline] Modeline 28:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   38.450417] [drm:drm_mode_debug_printmodeline] Modeline 29:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   38.450419] [drm:drm_mode_debug_printmodeline] Modeline 30:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[   38.450420] [drm:drm_mode_debug_printmodeline] Modeline 31:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   38.450425] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[   38.450441] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[   38.450442] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:HDMI-A-1]
>[   38.450443] [drm:intel_hdmi_detect] [CONNECTOR:17:HDMI-A-1]
>[   38.450642] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   38.450645] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   38.450648] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:HDMI-A-1] disconnected
>[   38.450654] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
>[   38.450656] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:HDMI-A-1]
>[   38.450658] [drm:intel_hdmi_detect] [CONNECTOR:17:HDMI-A-1]
>[   38.450820] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   38.450822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   38.450825] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:HDMI-A-1] disconnected
>[   38.450841] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[   38.450844] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[   38.450847] [drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[   38.450851] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] disconnected
>[   38.450854] [drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[   38.450864] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[   38.450865] [drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[   38.450867] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] disconnected
>[   38.450892] [drm:add_framebuffer_internal] [FB:24]
>[   38.508098] pm_rpm: starting subtest cursor
>[   38.508111] [drm:drm_mode_setcrtc] [CRTC:7]
>[   38.508114] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[   38.508116] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[   38.508118] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [NOCRTC]
>[   38.508119] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   38.508120] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   38.508121] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[   38.508123] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[   38.534067] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 7
>[   38.534075] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[   38.534488] [drm:intel_update_fbc] no output, disabling
>[   38.534491] [drm:intel_display_power_put] disabling always-on
>[   38.534496] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[   38.534499] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[   38.534501] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[   38.534503] [drm:check_crtc_state] [CRTC:7]
>[   38.534504] [drm:check_crtc_state] [CRTC:12]
>[   38.534506] [drm:check_shared_dpll_state] PCH DPLL A
>[   38.534510] [drm:check_shared_dpll_state] PCH DPLL B
>[   38.534516] [drm:drm_mode_setcrtc] [CRTC:12]
>[   38.534517] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[   38.534519] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[   38.537240] [drm:intel_runtime_suspend] Suspending device
>[   38.537251] [drm:intel_runtime_suspend] Device suspended
>[   38.634676] [drm:add_framebuffer_internal] [FB:38]
>[   38.634685] [drm:add_framebuffer_internal] [FB:39]
>[   38.634693] [drm:add_framebuffer_internal] [FB:40]
>[   38.645125] [drm:intel_runtime_resume] Resuming device
>[   38.645135] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[   38.667134] [drm:intel_runtime_resume] Device resumed
>[   38.667631] [drm:drm_mode_setcrtc] [CRTC:7]
>[   38.667634] [drm:drm_mode_setcrtc] [CONNECTOR:14:VGA-1]
>[   38.667636] [drm:intel_crtc_set_config] [CRTC:7] [FB:24] #connectors=1 (x y) (0 0)
>[   38.667637] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[   38.667639] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[   38.667640] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   38.667641] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[   38.667642] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   38.667643] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[   38.667645] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   38.667647] [drm:connected_sink_compute_bpp] [CONNECTOR:14:VGA-1] checking for sink bpp constrains
>[   38.667649] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
>[   38.667650] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[   38.667651] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
>[   38.667652] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   38.667653] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[   38.667655] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
>[   38.667657] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   38.667658] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   38.667659] [drm:intel_dump_pipe_config] requested mode:
>[   38.667661] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   38.667662] [drm:intel_dump_pipe_config] adjusted mode:
>[   38.667664] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   38.667666] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
>[   38.667667] [drm:intel_dump_pipe_config] port clock: 148500
>[   38.667668] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[   38.667669] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   38.667670] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   38.667671] [drm:intel_dump_pipe_config] ips: 0
>[   38.667672] [drm:intel_dump_pipe_config] double wide: 0
>[   38.667674] [drm:intel_display_power_get] enabling always-on
>[   38.670651] [drm:intel_get_shared_dpll] CRTC:7 allocated PCH DPLL A
>[   38.670652] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
>[   38.670653] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
>[   38.672005] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x100
>[   38.672007] [drm:gen6_fdi_link_train] FDI train 1 done.
>[   38.672663] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600
>[   38.672665] [drm:gen6_fdi_link_train] FDI train 2 done.
>[   38.672665] [drm:gen6_fdi_link_train] FDI train done.
>[   38.672668] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 7
>[   38.672670] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
>[   38.674543] [drm:ironlake_update_primary_plane] Writing base 00986000 00000000 0 0 7680
>[   38.674545] [drm:intel_update_fbc] disabled per chip default
>[   38.674548] [drm:intel_connector_check_state] [CONNECTOR:14:VGA-1]
>[   38.674551] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[   38.674554] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[   38.674556] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[   38.674558] [drm:check_crtc_state] [CRTC:7]
>[   38.674568] [drm:check_crtc_state] [CRTC:12]
>[   38.674569] [drm:check_shared_dpll_state] PCH DPLL A
>[   38.674573] [drm:check_shared_dpll_state] PCH DPLL B
>[   38.674583] [drm:add_framebuffer_internal] [FB:41]
>[   38.674596] [drm:drm_mode_setcrtc] [CRTC:7]
>[   38.674597] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
>[   38.674599] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[   38.674600] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [NOCRTC]
>[   38.674601] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   38.674602] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   38.674603] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[   38.674605] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[   38.708147] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 7
>[   38.708155] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[   38.708566] [drm:intel_update_fbc] no output, disabling
>[   38.708569] [drm:intel_display_power_put] disabling always-on
>[   38.708573] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[   38.708575] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[   38.708577] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[   38.708579] [drm:check_crtc_state] [CRTC:7]
>[   38.708581] [drm:check_crtc_state] [CRTC:12]
>[   38.708582] [drm:check_shared_dpll_state] PCH DPLL A
>[   38.708586] [drm:check_shared_dpll_state] PCH DPLL B
>[   38.708592] [drm:drm_mode_setcrtc] [CRTC:12]
>[   38.708594] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[   38.708595] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[   39.742851] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[   39.746594] [drm:gen6_enable_rps] Overclocking supported. Max: 1350MHz, Overclock max: 1350MHz
>[   39.770633] [drm:intel_runtime_suspend] Suspending device
>[   39.770648] [drm:intel_runtime_suspend] Device suspended
>[   39.810040] [drm:intel_crtc_cursor_set_obj] cursor off
>[   39.810052] [drm:add_framebuffer_internal] [FB:42]
>[   39.810059] ------------[ cut here ]------------
>[   39.810084] WARNING: CPU: 0 PID: 3911 at drivers/gpu/drm/i915/i915_gem_gtt.c:1486 gen6_ggtt_insert_entries+0xc9/0xee [i915]()
>[   39.810085] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich snd_timer mfd_core snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[   39.810098] CPU: 0 PID: 3911 Comm: pm_rpm Not tainted 3.16.0_drm-intel-nightly_da31e7_20140814+ #1394
>[   39.810099] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   39.810100]  00000000 c16f7570 00000000 c1031298 f81e79ca c2918000 ffffffff c7ede000
>[   39.810103]  c291c018 c10312b8 00000009 00000000 f81e79ca f117dc90 00000004 f87845dc
>[   39.810106]  00000000 00000000 00000000 00000001 00000001 f5abc8a0 f109b300 c2918000
>[   39.810108] Call Trace:
>[   39.810113]  [<c16f7570>] ? dump_stack+0x3e/0x4e
>[   39.810115]  [<c1031298>] ? warn_slowpath_common+0x65/0x78
>[   39.810123]  [<f81e79ca>] ? gen6_ggtt_insert_entries+0xc9/0xee [i915]
>[   39.810125]  [<c10312b8>] ? warn_slowpath_null+0xd/0x10
>[   39.810132]  [<f81e79ca>] ? gen6_ggtt_insert_entries+0xc9/0xee [i915]
>[   39.810139]  [<f81e75d1>] ? ggtt_bind_vma+0x6f/0xca [i915]
>[   39.810149]  [<f81ee779>] ? i915_gem_object_set_cache_level+0x10a/0x1d6 [i915]
>[   39.810158]  [<f81ef166>] ? i915_gem_object_pin_to_display_plane+0x6b/0x140 [i915]
>[   39.810168]  [<f8212e65>] ? intel_crtc_cursor_set_obj+0x15e/0x350 [i915]
>[   39.810176]  [<f8213161>] ? intel_cursor_plane_update+0xeb/0x106 [i915]
>[   39.810182]  [<f809b170>] ? setplane_internal+0x1bf/0x207 [drm]
>[   39.810187]  [<f809b34b>] ? drm_mode_cursor_common+0x193/0x276 [drm]
>[   39.810193]  [<f809d761>] ? drm_mode_cursor_ioctl+0x2c/0x33 [drm]
>[   39.810197]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.810202]  [<f8093dda>] ? drm_ioctl+0x233/0x35c [drm]
>[   39.810206]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.810208]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.810211]  [<c12d6ee5>] ? vsnprintf+0x78/0x25e
>[   39.810214]  [<c136be4a>] ? control_show+0x24/0x24
>[   39.810215]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.810217]  [<c12d7743>] ? sprintf+0x17/0x19
>[   39.810219]  [<c136bea4>] ? rtpm_status_show+0x5a/0x63
>[   39.810220]  [<c136645a>] ? dev_attr_show+0x10/0x32
>[   39.810224]  [<f8093ba7>] ? drm_getstats+0xe/0xe [drm]
>[   39.810227]  [<c10edddd>] ? do_vfs_ioctl+0x3fa/0x444
>[   39.810229]  [<c10e19e6>] ? vfs_read+0xe2/0x125
>[   39.810231]  [<c10ede69>] ? SyS_ioctl+0x42/0x6d
>[   39.810233]  [<c16fc428>] ? sysenter_do_call+0x12/0x12
>[   39.810235] ---[ end trace c86a0e0cf339cd12 ]---
>[   39.810236] ------------[ cut here ]------------
>[   39.810245] WARNING: CPU: 0 PID: 3911 at drivers/gpu/drm/i915/intel_uncore.c:47 assert_device_not_suspended+0x39/0x3d [i915]()
>[   39.810246] Device suspended
>[   39.810247] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich snd_timer mfd_core snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[   39.810258] CPU: 0 PID: 3911 Comm: pm_rpm Tainted: G        W     3.16.0_drm-intel-nightly_da31e7_20140814+ #1394
>[   39.810259] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   39.810259]  00000000 c16f7570 f117dc48 c1031298 f820264d c2918058 ffffffff c7ede000
>[   39.810262]  c2918000 c1031313 00000009 f117dc48 f82537bc f117dc60 f820264d f8253614
>[   39.810265]  0000002f f82537bc f8204506 00101008 00000001 c2918000 ffffffff c7ede000
>[   39.810267] Call Trace:
>[   39.810269]  [<c16f7570>] ? dump_stack+0x3e/0x4e
>[   39.810270]  [<c1031298>] ? warn_slowpath_common+0x65/0x78
>[   39.810279]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.810280]  [<c1031313>] ? warn_slowpath_fmt+0x29/0x2d
>[   39.810289]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.810297]  [<f8204506>] ? gen6_write32+0x5e/0xb6 [i915]
>[   39.810305]  [<f81e79db>] ? gen6_ggtt_insert_entries+0xda/0xee [i915]
>[   39.810312]  [<f81e75d1>] ? ggtt_bind_vma+0x6f/0xca [i915]
>[   39.810321]  [<f81ee779>] ? i915_gem_object_set_cache_level+0x10a/0x1d6 [i915]
>[   39.810330]  [<f81ef166>] ? i915_gem_object_pin_to_display_plane+0x6b/0x140 [i915]
>[   39.810340]  [<f8212e65>] ? intel_crtc_cursor_set_obj+0x15e/0x350 [i915]
>[   39.810348]  [<f8213161>] ? intel_cursor_plane_update+0xeb/0x106 [i915]
>[   39.810354]  [<f809b170>] ? setplane_internal+0x1bf/0x207 [drm]
>[   39.810358]  [<f809b34b>] ? drm_mode_cursor_common+0x193/0x276 [drm]
>[   39.810363]  [<f809d761>] ? drm_mode_cursor_ioctl+0x2c/0x33 [drm]
>[   39.810367]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.810371]  [<f8093dda>] ? drm_ioctl+0x233/0x35c [drm]
>[   39.810375]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.810376]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.810378]  [<c12d6ee5>] ? vsnprintf+0x78/0x25e
>[   39.810380]  [<c136be4a>] ? control_show+0x24/0x24
>[   39.810381]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.810383]  [<c12d7743>] ? sprintf+0x17/0x19
>[   39.810384]  [<c136bea4>] ? rtpm_status_show+0x5a/0x63
>[   39.810386]  [<c136645a>] ? dev_attr_show+0x10/0x32
>[   39.810390]  [<f8093ba7>] ? drm_getstats+0xe/0xe [drm]
>[   39.810392]  [<c10edddd>] ? do_vfs_ioctl+0x3fa/0x444
>[   39.810393]  [<c10e19e6>] ? vfs_read+0xe2/0x125
>[   39.810395]  [<c10ede69>] ? SyS_ioctl+0x42/0x6d
>[   39.810397]  [<c16fc428>] ? sysenter_do_call+0x12/0x12
>[   39.810398] ---[ end trace c86a0e0cf339cd13 ]---
>[   39.810399] ------------[ cut here ]------------
>[   39.810408] WARNING: CPU: 0 PID: 3911 at drivers/gpu/drm/i915/intel_uncore.c:47 assert_device_not_suspended+0x39/0x3d [i915]()
>[   39.810409] Device suspended
>[   39.810409] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich snd_timer mfd_core snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[   39.810420] CPU: 0 PID: 3911 Comm: pm_rpm Tainted: G        W     3.16.0_drm-intel-nightly_da31e7_20140814+ #1394
>[   39.810421] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   39.810422]  00000000 c16f7570 f117dc44 c1031298 f820264d c2918000 00101008 c2918058
>[   39.810424]  c2918054 c1031313 00000009 f117dc44 f82537bc f117dc5c f820264d f8253614
>[   39.810427]  0000002f f82537bc f820483c f820450d 00101008 00000001 c2918000 ffffffff
>[   39.810430] Call Trace:
>[   39.810431]  [<c16f7570>] ? dump_stack+0x3e/0x4e
>[   39.810433]  [<c1031298>] ? warn_slowpath_common+0x65/0x78
>[   39.810441]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.810442]  [<c1031313>] ? warn_slowpath_fmt+0x29/0x2d
>[   39.810450]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.810458]  [<f820483c>] ? gen6_read32+0x1a/0xdd [i915]
>[   39.810466]  [<f820450d>] ? gen6_write32+0x65/0xb6 [i915]
>[   39.810474]  [<f81e79e7>] ? gen6_ggtt_insert_entries+0xe6/0xee [i915]
>[   39.810481]  [<f81e75d1>] ? ggtt_bind_vma+0x6f/0xca [i915]
>[   39.810490]  [<f81ee779>] ? i915_gem_object_set_cache_level+0x10a/0x1d6 [i915]
>[   39.810498]  [<f81ef166>] ? i915_gem_object_pin_to_display_plane+0x6b/0x140 [i915]
>[   39.810507]  [<f8212e65>] ? intel_crtc_cursor_set_obj+0x15e/0x350 [i915]
>[   39.810515]  [<f8213161>] ? intel_cursor_plane_update+0xeb/0x106 [i915]
>[   39.810520]  [<f809b170>] ? setplane_internal+0x1bf/0x207 [drm]
>[   39.810525]  [<f809b34b>] ? drm_mode_cursor_common+0x193/0x276 [drm]
>[   39.810530]  [<f809d761>] ? drm_mode_cursor_ioctl+0x2c/0x33 [drm]
>[   39.810533]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.810538]  [<f8093dda>] ? drm_ioctl+0x233/0x35c [drm]
>[   39.810541]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.810543]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.810545]  [<c12d6ee5>] ? vsnprintf+0x78/0x25e
>[   39.810547]  [<c136be4a>] ? control_show+0x24/0x24
>[   39.810548]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.810550]  [<c12d7743>] ? sprintf+0x17/0x19
>[   39.810551]  [<c136bea4>] ? rtpm_status_show+0x5a/0x63
>[   39.810553]  [<c136645a>] ? dev_attr_show+0x10/0x32
>[   39.810556]  [<f8093ba7>] ? drm_getstats+0xe/0xe [drm]
>[   39.810558]  [<c10edddd>] ? do_vfs_ioctl+0x3fa/0x444
>[   39.810560]  [<c10e19e6>] ? vfs_read+0xe2/0x125
>[   39.810562]  [<c10ede69>] ? SyS_ioctl+0x42/0x6d
>[   39.810564]  [<c16fc428>] ? sysenter_do_call+0x12/0x12
>[   39.810565] ---[ end trace c86a0e0cf339cd14 ]---
>[   39.810578] [drm:add_framebuffer_internal] [FB:43]
>[   39.810584] [drm:add_framebuffer_internal] [FB:40]
>[   39.810654] ------------[ cut here ]------------
>[   39.810662] WARNING: CPU: 0 PID: 3911 at drivers/gpu/drm/i915/i915_gem_gtt.c:1486 gen6_ggtt_insert_entries+0xc9/0xee [i915]()
>[   39.810663] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich snd_timer mfd_core snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[   39.810674] CPU: 0 PID: 3911 Comm: pm_rpm Tainted: G        W     3.16.0_drm-intel-nightly_da31e7_20140814+ #1394
>[   39.810674] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   39.810675]  00000000 c16f7570 00000000 c1031298 f81e79ca c2918000 ffffffff c7fdb000
>[   39.810678]  c291c018 c10312b8 00000009 00000000 f81e79ca f117dc90 00000100 f87849dc
>[   39.810680]  00000000 00000000 00000000 00000001 00000001 f5abccc0 f109b000 c2918000
>[   39.810693] Call Trace:
>[   39.810699]  [<c16f7570>] ? dump_stack+0x3e/0x4e
>[   39.810705]  [<c1031298>] ? warn_slowpath_common+0x65/0x78
>[   39.810717]  [<f81e79ca>] ? gen6_ggtt_insert_entries+0xc9/0xee [i915]
>[   39.810723]  [<c10312b8>] ? warn_slowpath_null+0xd/0x10
>[   39.810735]  [<f81e79ca>] ? gen6_ggtt_insert_entries+0xc9/0xee [i915]
>[   39.810746]  [<f81e75d1>] ? ggtt_bind_vma+0x6f/0xca [i915]
>[   39.810759]  [<f81ee779>] ? i915_gem_object_set_cache_level+0x10a/0x1d6 [i915]
>[   39.810772]  [<f81ef166>] ? i915_gem_object_pin_to_display_plane+0x6b/0x140 [i915]
>[   39.810786]  [<f8212e65>] ? intel_crtc_cursor_set_obj+0x15e/0x350 [i915]
>[   39.810799]  [<f8213161>] ? intel_cursor_plane_update+0xeb/0x106 [i915]
>[   39.810806]  [<f809b170>] ? setplane_internal+0x1bf/0x207 [drm]
>[   39.810810]  [<f809b34b>] ? drm_mode_cursor_common+0x193/0x276 [drm]
>[   39.810816]  [<f809d761>] ? drm_mode_cursor_ioctl+0x2c/0x33 [drm]
>[   39.810822]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.810828]  [<f8093dda>] ? drm_ioctl+0x233/0x35c [drm]
>[   39.810835]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.810837]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.810840]  [<c12d6ee5>] ? vsnprintf+0x78/0x25e
>[   39.810843]  [<c136be4a>] ? control_show+0x24/0x24
>[   39.810845]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.810848]  [<c12d7743>] ? sprintf+0x17/0x19
>[   39.810850]  [<c136bea4>] ? rtpm_status_show+0x5a/0x63
>[   39.810852]  [<c136645a>] ? dev_attr_show+0x10/0x32
>[   39.810858]  [<f8093ba7>] ? drm_getstats+0xe/0xe [drm]
>[   39.810861]  [<c10edddd>] ? do_vfs_ioctl+0x3fa/0x444
>[   39.810864]  [<c10e19e6>] ? vfs_read+0xe2/0x125
>[   39.810868]  [<c10ede69>] ? SyS_ioctl+0x42/0x6d
>[   39.810871]  [<c16fc428>] ? sysenter_do_call+0x12/0x12
>[   39.810872] ---[ end trace c86a0e0cf339cd15 ]---
>[   39.810873] ------------[ cut here ]------------
>[   39.810885] WARNING: CPU: 0 PID: 3911 at drivers/gpu/drm/i915/intel_uncore.c:47 assert_device_not_suspended+0x39/0x3d [i915]()
>[   39.810886] Device suspended
>[   39.810888] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich snd_timer mfd_core snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[   39.810904] CPU: 0 PID: 3911 Comm: pm_rpm Tainted: G        W     3.16.0_drm-intel-nightly_da31e7_20140814+ #1394
>[   39.810906] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   39.810907]  00000000 c16f7570 f117dc48 c1031298 f820264d c2918058 ffffffff c7fdb000
>[   39.810911]  c2918000 c1031313 00000009 f117dc48 f82537bc f117dc60 f820264d f8253614
>[   39.810915]  0000002f f82537bc f8204506 00101008 00000001 c2918000 ffffffff c7fdb000
>[   39.810919] Call Trace:
>[   39.810922]  [<c16f7570>] ? dump_stack+0x3e/0x4e
>[   39.810924]  [<c1031298>] ? warn_slowpath_common+0x65/0x78
>[   39.810938]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.810940]  [<c1031313>] ? warn_slowpath_fmt+0x29/0x2d
>[   39.810954]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.810967]  [<f8204506>] ? gen6_write32+0x5e/0xb6 [i915]
>[   39.810981]  [<f81e79db>] ? gen6_ggtt_insert_entries+0xda/0xee [i915]
>[   39.810993]  [<f81e75d1>] ? ggtt_bind_vma+0x6f/0xca [i915]
>[   39.811007]  [<f81ee779>] ? i915_gem_object_set_cache_level+0x10a/0x1d6 [i915]
>[   39.811020]  [<f81ef166>] ? i915_gem_object_pin_to_display_plane+0x6b/0x140 [i915]
>[   39.811036]  [<f8212e65>] ? intel_crtc_cursor_set_obj+0x15e/0x350 [i915]
>[   39.811050]  [<f8213161>] ? intel_cursor_plane_update+0xeb/0x106 [i915]
>[   39.811063]  [<f809b170>] ? setplane_internal+0x1bf/0x207 [drm]
>[   39.811072]  [<f809b34b>] ? drm_mode_cursor_common+0x193/0x276 [drm]
>[   39.811080]  [<f809d761>] ? drm_mode_cursor_ioctl+0x2c/0x33 [drm]
>[   39.811088]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.811097]  [<f8093dda>] ? drm_ioctl+0x233/0x35c [drm]
>[   39.811105]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.811112]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.811118]  [<c12d6ee5>] ? vsnprintf+0x78/0x25e
>[   39.811125]  [<c136be4a>] ? control_show+0x24/0x24
>[   39.811131]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.811136]  [<c12d7743>] ? sprintf+0x17/0x19
>[   39.811138]  [<c136bea4>] ? rtpm_status_show+0x5a/0x63
>[   39.811139]  [<c136645a>] ? dev_attr_show+0x10/0x32
>[   39.811145]  [<f8093ba7>] ? drm_getstats+0xe/0xe [drm]
>[   39.811148]  [<c10edddd>] ? do_vfs_ioctl+0x3fa/0x444
>[   39.811151]  [<c10e19e6>] ? vfs_read+0xe2/0x125
>[   39.811154]  [<c10ede69>] ? SyS_ioctl+0x42/0x6d
>[   39.811157]  [<c16fc428>] ? sysenter_do_call+0x12/0x12
>[   39.811159] ---[ end trace c86a0e0cf339cd16 ]---
>[   39.811160] ------------[ cut here ]------------
>[   39.811174] WARNING: CPU: 0 PID: 3911 at drivers/gpu/drm/i915/intel_uncore.c:47 assert_device_not_suspended+0x39/0x3d [i915]()
>[   39.811176] Device suspended
>[   39.811177] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich snd_timer mfd_core snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[   39.811194] CPU: 0 PID: 3911 Comm: pm_rpm Tainted: G        W     3.16.0_drm-intel-nightly_da31e7_20140814+ #1394
>[   39.811196] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   39.811197]  00000000 c16f7570 f117dc44 c1031298 f820264d c2918000 00101008 c2918058
>[   39.811202]  c2918054 c1031313 00000009 f117dc44 f82537bc f117dc5c f820264d f8253614
>[   39.811206]  0000002f f82537bc f820483c f820450d 00101008 00000001 c2918000 ffffffff
>[   39.811210] Call Trace:
>[   39.811213]  [<c16f7570>] ? dump_stack+0x3e/0x4e
>[   39.811215]  [<c1031298>] ? warn_slowpath_common+0x65/0x78
>[   39.811228]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.811231]  [<c1031313>] ? warn_slowpath_fmt+0x29/0x2d
>[   39.811244]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.811257]  [<f820483c>] ? gen6_read32+0x1a/0xdd [i915]
>[   39.811269]  [<f820450d>] ? gen6_write32+0x65/0xb6 [i915]
>[   39.811282]  [<f81e79e7>] ? gen6_ggtt_insert_entries+0xe6/0xee [i915]
>[   39.811294]  [<f81e75d1>] ? ggtt_bind_vma+0x6f/0xca [i915]
>[   39.811307]  [<f81ee779>] ? i915_gem_object_set_cache_level+0x10a/0x1d6 [i915]
>[   39.811321]  [<f81ef166>] ? i915_gem_object_pin_to_display_plane+0x6b/0x140 [i915]
>[   39.811340]  [<f8212e65>] ? intel_crtc_cursor_set_obj+0x15e/0x350 [i915]
>[   39.811353]  [<f8213161>] ? intel_cursor_plane_update+0xeb/0x106 [i915]
>[   39.811363]  [<f809b170>] ? setplane_internal+0x1bf/0x207 [drm]
>[   39.811371]  [<f809b34b>] ? drm_mode_cursor_common+0x193/0x276 [drm]
>[   39.811378]  [<f809d761>] ? drm_mode_cursor_ioctl+0x2c/0x33 [drm]
>[   39.811384]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.811391]  [<f8093dda>] ? drm_ioctl+0x233/0x35c [drm]
>[   39.811397]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.811400]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.811403]  [<c12d6ee5>] ? vsnprintf+0x78/0x25e
>[   39.811406]  [<c136be4a>] ? control_show+0x24/0x24
>[   39.811408]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.811411]  [<c12d7743>] ? sprintf+0x17/0x19
>[   39.811413]  [<c136bea4>] ? rtpm_status_show+0x5a/0x63
>[   39.811416]  [<c136645a>] ? dev_attr_show+0x10/0x32
>[   39.811422]  [<f8093ba7>] ? drm_getstats+0xe/0xe [drm]
>[   39.811425]  [<c10edddd>] ? do_vfs_ioctl+0x3fa/0x444
>[   39.811428]  [<c10e19e6>] ? vfs_read+0xe2/0x125
>[   39.811431]  [<c10ede69>] ? SyS_ioctl+0x42/0x6d
>[   39.811439]  [<c16fc428>] ? sysenter_do_call+0x12/0x12
>[   39.811443] ---[ end trace c86a0e0cf339cd17 ]---
>[   39.811727] ------------[ cut here ]------------
>[   39.811736] WARNING: CPU: 0 PID: 3911 at drivers/gpu/drm/i915/intel_uncore.c:47 assert_device_not_suspended+0x39/0x3d [i915]()
>[   39.811738] Device suspended
>[   39.811738] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich snd_timer mfd_core snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[   39.811749] CPU: 0 PID: 3911 Comm: pm_rpm Tainted: G        W     3.16.0_drm-intel-nightly_da31e7_20140814+ #1394
>[   39.811750] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   39.811751]  00000000 c16f7570 f117dc94 c1031298 f820264d c2918058 f109b000 f4cf8800
>[   39.811754]  c2918000 c1031313 00000009 f117dc94 f82537bc f117dcac f820264d f8253614
>[   39.811757]  0000002f f82537bc f8204506 00100000 00000000 00000000 f109b000 f4cf8800
>[   39.811760] Call Trace:
>[   39.811762]  [<c16f7570>] ? dump_stack+0x3e/0x4e
>[   39.811763]  [<c1031298>] ? warn_slowpath_common+0x65/0x78
>[   39.811771]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.811773]  [<c1031313>] ? warn_slowpath_fmt+0x29/0x2d
>[   39.811781]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.811789]  [<f8204506>] ? gen6_write32+0x5e/0xb6 [i915]
>[   39.811798]  [<f81ecf16>] ? i915_gem_write_fence+0xad/0x458 [i915]
>[   39.811807]  [<f81ed2f2>] ? i915_gem_object_update_fence+0x31/0xa4 [i915]
>[   39.811814]  [<f81ed3db>] ? i915_gem_object_put_fence+0x76/0x89 [i915]
>[   39.811823]  [<f8212e95>] ? intel_crtc_cursor_set_obj+0x18e/0x350 [i915]
>[   39.811832]  [<f8213161>] ? intel_cursor_plane_update+0xeb/0x106 [i915]
>[   39.811837]  [<f809b170>] ? setplane_internal+0x1bf/0x207 [drm]
>[   39.811841]  [<f809b34b>] ? drm_mode_cursor_common+0x193/0x276 [drm]
>[   39.811847]  [<f809d761>] ? drm_mode_cursor_ioctl+0x2c/0x33 [drm]
>[   39.811851]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.811855]  [<f8093dda>] ? drm_ioctl+0x233/0x35c [drm]
>[   39.811858]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.811860]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.811863]  [<c12d6ee5>] ? vsnprintf+0x78/0x25e
>[   39.811865]  [<c136be4a>] ? control_show+0x24/0x24
>[   39.811866]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.811868]  [<c12d7743>] ? sprintf+0x17/0x19
>[   39.811869]  [<c136bea4>] ? rtpm_status_show+0x5a/0x63
>[   39.811871]  [<c136645a>] ? dev_attr_show+0x10/0x32
>[   39.811874]  [<f8093ba7>] ? drm_getstats+0xe/0xe [drm]
>[   39.811876]  [<c10edddd>] ? do_vfs_ioctl+0x3fa/0x444
>[   39.811878]  [<c10e19e6>] ? vfs_read+0xe2/0x125
>[   39.811881]  [<c10ede69>] ? SyS_ioctl+0x42/0x6d
>[   39.811883]  [<c16fc428>] ? sysenter_do_call+0x12/0x12
>[   39.811884] ---[ end trace c86a0e0cf339cd18 ]---
>[   39.811885] ------------[ cut here ]------------
>[   39.811894] WARNING: CPU: 0 PID: 3911 at drivers/gpu/drm/i915/intel_uncore.c:47 assert_device_not_suspended+0x39/0x3d [i915]()
>[   39.811895] Device suspended
>[   39.811895] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich snd_timer mfd_core snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[   39.811907] CPU: 0 PID: 3911 Comm: pm_rpm Tainted: G        W     3.16.0_drm-intel-nightly_da31e7_20140814+ #1394
>[   39.811908] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   39.811908]  00000000 c16f7570 f117dc90 c1031298 f820264d c2918000 00100000 c2918058
>[   39.811911]  c2918054 c1031313 00000009 f117dc90 f82537bc f117dca8 f820264d f8253614
>[   39.811914]  0000002f f82537bc f820483c f820450d 00100000 00000000 00000000 f109b000
>[   39.811916] Call Trace:
>[   39.811918]  [<c16f7570>] ? dump_stack+0x3e/0x4e
>[   39.811920]  [<c1031298>] ? warn_slowpath_common+0x65/0x78
>[   39.811928]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.811929]  [<c1031313>] ? warn_slowpath_fmt+0x29/0x2d
>[   39.811937]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.811946]  [<f820483c>] ? gen6_read32+0x1a/0xdd [i915]
>[   39.811953]  [<f820450d>] ? gen6_write32+0x65/0xb6 [i915]
>[   39.811962]  [<f81ecf21>] ? i915_gem_write_fence+0xb8/0x458 [i915]
>[   39.811970]  [<f81ed2f2>] ? i915_gem_object_update_fence+0x31/0xa4 [i915]
>[   39.811978]  [<f81ed3db>] ? i915_gem_object_put_fence+0x76/0x89 [i915]
>[   39.811987]  [<f8212e95>] ? intel_crtc_cursor_set_obj+0x18e/0x350 [i915]
>[   39.811996]  [<f8213161>] ? intel_cursor_plane_update+0xeb/0x106 [i915]
>[   39.812001]  [<f809b170>] ? setplane_internal+0x1bf/0x207 [drm]
>[   39.812006]  [<f809b34b>] ? drm_mode_cursor_common+0x193/0x276 [drm]
>[   39.812011]  [<f809d761>] ? drm_mode_cursor_ioctl+0x2c/0x33 [drm]
>[   39.812015]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.812019]  [<f8093dda>] ? drm_ioctl+0x233/0x35c [drm]
>[   39.812023]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.812025]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.812027]  [<c12d6ee5>] ? vsnprintf+0x78/0x25e
>[   39.812029]  [<c136be4a>] ? control_show+0x24/0x24
>[   39.812030]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.812032]  [<c12d7743>] ? sprintf+0x17/0x19
>[   39.812034]  [<c136bea4>] ? rtpm_status_show+0x5a/0x63
>[   39.812035]  [<c136645a>] ? dev_attr_show+0x10/0x32
>[   39.812039]  [<f8093ba7>] ? drm_getstats+0xe/0xe [drm]
>[   39.812041]  [<c10edddd>] ? do_vfs_ioctl+0x3fa/0x444
>[   39.812043]  [<c10e19e6>] ? vfs_read+0xe2/0x125
>[   39.812045]  [<c10ede69>] ? SyS_ioctl+0x42/0x6d
>[   39.812047]  [<c16fc428>] ? sysenter_do_call+0x12/0x12
>[   39.812048] ---[ end trace c86a0e0cf339cd19 ]---
>[   39.812050] ------------[ cut here ]------------
>[   39.812059] WARNING: CPU: 0 PID: 3911 at drivers/gpu/drm/i915/intel_uncore.c:47 assert_device_not_suspended+0x39/0x3d [i915]()
>[   39.812059] Device suspended
>[   39.812061] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich snd_timer mfd_core snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[   39.812071] CPU: 0 PID: 3911 Comm: pm_rpm Tainted: G        W     3.16.0_drm-intel-nightly_da31e7_20140814+ #1394
>[   39.812072] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   39.812073]  00000000 c16f7570 f117dc94 c1031298 f820264d c2918058 f109b000 f4cf8800
>[   39.812075]  c2918000 c1031313 00000009 f117dc94 f82537bc f117dcac f820264d f8253614
>[   39.812079]  0000002f f82537bc f8204506 00100004 00000000 00100004 f109b000 f4cf8800
>[   39.812082] Call Trace:
>[   39.812083]  [<c16f7570>] ? dump_stack+0x3e/0x4e
>[   39.812084]  [<c1031298>] ? warn_slowpath_common+0x65/0x78
>[   39.812092]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.812094]  [<c1031313>] ? warn_slowpath_fmt+0x29/0x2d
>[   39.812102]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.812110]  [<f8204506>] ? gen6_write32+0x5e/0xb6 [i915]
>[   39.812118]  [<f81ecffc>] ? i915_gem_write_fence+0x193/0x458 [i915]
>[   39.812127]  [<f81ed2f2>] ? i915_gem_object_update_fence+0x31/0xa4 [i915]
>[   39.812134]  [<f81ed3db>] ? i915_gem_object_put_fence+0x76/0x89 [i915]
>[   39.812144]  [<f8212e95>] ? intel_crtc_cursor_set_obj+0x18e/0x350 [i915]
>[   39.812152]  [<f8213161>] ? intel_cursor_plane_update+0xeb/0x106 [i915]
>[   39.812158]  [<f809b170>] ? setplane_internal+0x1bf/0x207 [drm]
>[   39.812162]  [<f809b34b>] ? drm_mode_cursor_common+0x193/0x276 [drm]
>[   39.812167]  [<f809d761>] ? drm_mode_cursor_ioctl+0x2c/0x33 [drm]
>[   39.812170]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.812174]  [<f8093dda>] ? drm_ioctl+0x233/0x35c [drm]
>[   39.812179]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.812180]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.812182]  [<c12d6ee5>] ? vsnprintf+0x78/0x25e
>[   39.812184]  [<c136be4a>] ? control_show+0x24/0x24
>[   39.812185]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.812187]  [<c12d7743>] ? sprintf+0x17/0x19
>[   39.812188]  [<c136bea4>] ? rtpm_status_show+0x5a/0x63
>[   39.812190]  [<c136645a>] ? dev_attr_show+0x10/0x32
>[   39.812194]  [<f8093ba7>] ? drm_getstats+0xe/0xe [drm]
>[   39.812196]  [<c10edddd>] ? do_vfs_ioctl+0x3fa/0x444
>[   39.812198]  [<c10e19e6>] ? vfs_read+0xe2/0x125
>[   39.812200]  [<c10ede69>] ? SyS_ioctl+0x42/0x6d
>[   39.812202]  [<c16fc428>] ? sysenter_do_call+0x12/0x12
>[   39.812203] ---[ end trace c86a0e0cf339cd1a ]---
>[   39.812204] ------------[ cut here ]------------
>[   39.812212] WARNING: CPU: 0 PID: 3911 at drivers/gpu/drm/i915/intel_uncore.c:47 assert_device_not_suspended+0x39/0x3d [i915]()
>[   39.812214] Device suspended
>[   39.812214] Modules linked in: dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev dcdbas serio_raw pcspkr i2c_i801 snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm lpc_ich snd_timer mfd_core snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
>[   39.812225] CPU: 0 PID: 3911 Comm: pm_rpm Tainted: G        W     3.16.0_drm-intel-nightly_da31e7_20140814+ #1394
>[   39.812226] Hardware name: Dell Inc. OptiPlex 990/0DXWW6, BIOS A02 02/26/2011
>[   39.812226]  00000000 c16f7570 f117dc90 c1031298 f820264d c2918000 00100004 c2918058
>[   39.812229]  c2918054 c1031313 00000009 f117dc90 f82537bc f117dca8 f820264d f8253614
>[   39.812232]  0000002f f82537bc f820483c f820450d 00100004 00000000 00100004 f109b000
>[   39.812235] Call Trace:
>[   39.812236]  [<c16f7570>] ? dump_stack+0x3e/0x4e
>[   39.812238]  [<c1031298>] ? warn_slowpath_common+0x65/0x78
>[   39.812245]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.812247]  [<c1031313>] ? warn_slowpath_fmt+0x29/0x2d
>[   39.812255]  [<f820264d>] ? assert_device_not_suspended+0x39/0x3d [i915]
>[   39.812263]  [<f820483c>] ? gen6_read32+0x1a/0xdd [i915]
>[   39.812271]  [<f820450d>] ? gen6_write32+0x65/0xb6 [i915]
>[   39.812280]  [<f81ed005>] ? i915_gem_write_fence+0x19c/0x458 [i915]
>[   39.812288]  [<f81ed2f2>] ? i915_gem_object_update_fence+0x31/0xa4 [i915]
>[   39.812296]  [<f81ed3db>] ? i915_gem_object_put_fence+0x76/0x89 [i915]
>[   39.812305]  [<f8212e95>] ? intel_crtc_cursor_set_obj+0x18e/0x350 [i915]
>[   39.812313]  [<f8213161>] ? intel_cursor_plane_update+0xeb/0x106 [i915]
>[   39.812319]  [<f809b170>] ? setplane_internal+0x1bf/0x207 [drm]
>[   39.812323]  [<f809b34b>] ? drm_mode_cursor_common+0x193/0x276 [drm]
>[   39.812328]  [<f809d761>] ? drm_mode_cursor_ioctl+0x2c/0x33 [drm]
>[   39.812332]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.812336]  [<f8093dda>] ? drm_ioctl+0x233/0x35c [drm]
>[   39.812340]  [<f809d735>] ? drm_mode_setcrtc+0x405/0x405 [drm]
>[   39.812342]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.812343]  [<c12d6ee5>] ? vsnprintf+0x78/0x25e
>[   39.812345]  [<c136be4a>] ? control_show+0x24/0x24
>[   39.812347]  [<c136644a>] ? dev_driver_string+0x26/0x26
>[   39.812348]  [<c12d7743>] ? sprintf+0x17/0x19
>[   39.812350]  [<c136bea4>] ? rtpm_status_show+0x5a/0x63
>[   39.812352]  [<c136645a>] ? dev_attr_show+0x10/0x32
>[   39.812356]  [<f8093ba7>] ? drm_getstats+0xe/0xe [drm]
>[   39.812358]  [<c10edddd>] ? do_vfs_ioctl+0x3fa/0x444
>[   39.812359]  [<c10e19e6>] ? vfs_read+0xe2/0x125
>[   39.812361]  [<c10ede69>] ? SyS_ioctl+0x42/0x6d
>[   39.812363]  [<c16fc428>] ? sysenter_do_call+0x12/0x12
>[   39.812364] ---[ end trace c86a0e0cf339cd1b ]---
>[   39.812371] [drm:intel_crtc_cursor_set_obj] cursor off
>[   39.822638] [drm:intel_runtime_resume] Resuming device
>[   39.822641] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
>[   39.844645] [drm:intel_runtime_resume] Device resumed
>[   39.845151] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[   39.845152] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[   39.845153] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
>[   39.845153] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[   39.845154] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[   39.845155] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[   39.845156] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[   39.845157] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   39.845158] [drm:connected_sink_compute_bpp] [CONNECTOR:14:VGA-1] checking for sink bpp constrains
>[   39.845159] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
>[   39.845160] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[   39.845161] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
>[   39.845161] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   39.845162] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[   39.845163] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
>[   39.845164] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   39.845165] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   39.845165] [drm:intel_dump_pipe_config] requested mode:
>[   39.845167] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   39.845167] [drm:intel_dump_pipe_config] adjusted mode:
>[   39.845168] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   39.845170] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
>[   39.845170] [drm:intel_dump_pipe_config] port clock: 148500
>[   39.845171] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[   39.845171] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   39.845172] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   39.845173] [drm:intel_dump_pipe_config] ips: 0
>[   39.845173] [drm:intel_dump_pipe_config] double wide: 0
>[   39.845174] [drm:intel_display_power_get] enabling always-on
>[   39.845196] [drm:intel_get_shared_dpll] CRTC:7 allocated PCH DPLL A
>[   39.845196] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
>[   39.845197] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
>[   39.846551] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x100
>[   39.846552] [drm:gen6_fdi_link_train] FDI train 1 done.
>[   39.847207] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600
>[   39.847208] [drm:gen6_fdi_link_train] FDI train 2 done.
>[   39.847209] [drm:gen6_fdi_link_train] FDI train done.
>[   39.847211] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 7
>[   39.847212] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
>[   39.849084] [drm:ironlake_update_primary_plane] Writing base 0019D000 00000000 0 0 7680
>[   39.849086] [drm:intel_update_fbc] disabled per chip default
>[   39.849088] [drm:intel_connector_check_state] [CONNECTOR:14:VGA-1]
>[   39.849091] [drm:check_encoder_state] [ENCODER:15:DAC-15]
>[   39.849093] [drm:check_encoder_state] [ENCODER:16:TMDS-16]
>[   39.849094] [drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[   39.849096] [drm:check_crtc_state] [CRTC:7]
>[   39.849105] [drm:check_crtc_state] [CRTC:12]
>[   39.849106] [drm:check_shared_dpll_state] PCH DPLL A
>[   39.849109] [drm:check_shared_dpll_state] PCH DPLL B
>[   39.849112] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[   39.849113] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[   39.849114] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[   39.849117] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[   39.849118] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   39.849119] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[   39.849127] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[   39.849128] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   39.849128] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[   39.855079] [drm:intel_crtc_set_config] [CRTC:7] [FB:37] #connectors=1 (x y) (0 0)
>[   39.855081] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   39.855083] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[   39.855084] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[   39.855085] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[   39.855087] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [CRTC:7]
>[   41.743817] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[   41.747516] [drm:gen6_enable_rps] Overclocking supported. Max: 1350MHz, Overclock max: 1350MHz

Actions: View

Attachments on bug 82603: 104608

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.