Attachment 104923 Details for Bug 82829 – dmesg with drm.debug=0x0e of monitor with correct colors

dmesg with drm.debug=0x0e of monitor with correct colors

dmesg-correct-gamma-extracted (text/plain), 46.45 KB, created by timshel on 2014-08-19 22:08:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: timshel

Created: 2014-08-19 22:08:04 UTC

Size: 46.45 KB

patch

obsolete

>[drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0a16 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[drm:intel_detect_pch] Found LynxPoint LP PCH
>[drm] Memory usable by graphics device = 2048M
>[drm:i915_gem_gtt_init] GMADR size = 512M
>[drm:i915_gem_gtt_init] GTT stolen size = 32M
>[drm:i915_gem_gtt_init] ppgtt mode: 1
>[drm] Replacing VGA console driver
>[drm:intel_opregion_setup] graphic opregion physical addr: 0xbce45018
>[drm:intel_opregion_setup] Public ACPI methods supported
>[drm:intel_opregion_setup] SWSCI supportedd.
>[drm:swsci_setup] SWSCI BIOS requested (00200383) SBCB callbacks that are not supported (02200705)
>[drm:swsci_setup] SWSCI GBDA callbacks 00000483, SBCB callbacks 00200383
>[drm:intel_opregion_setup] ASLE supported
>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[drm] Driver supports precise vblank timestamp query.
>[drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data] DRRS supported mode is static
>[drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x8 0xa
>[drm:parse_lfp_panel_data] VBT initial LVDS value 20033c
>[drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 3, level 255
>[drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[drm:parse_driver_features] DRRS State Enabled:1
>[drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[drm:parse_ddi_port] VBT HDMI level shift for port B: 1
>[drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[drm:parse_ddi_port] VBT HDMI level shift for port C: 1
>[drm:intel_dsm_pci_probe] no _DSM method for intel device
>[drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at bda00000
>[drm:intel_display_power_get] enabling always-on
>[drm:intel_display_power_get] enabling display
>[drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
>[drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
>[drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
>[drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
>[drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
>[drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
>[drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
>[drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
>[drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
>[drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[drm:intel_modeset_init] 3 display pipes available.
>[drm:intel_ddi_pll_init] CDCLK running at 450000KHz
>[drm:intel_dp_init_connector] Adding eDP connector on port A
>[drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[drm:_edp_panel_vdd_on] Turning eDP VDD on
>[drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[drm:intel_dp_get_dpcd] Detected EDP PSR Panel.
>[drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm] VBT doesn't support DRRS
>[drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 851/851, sysfs interface registered
>[drm:intel_dp_init_connector] Adding DP connector on port B
>[drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[drm:intel_dp_init_connector] Adding DP connector on port C
>[drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2
>[drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled
>[drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
>[drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x80000000
>[drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A
>[drm:intel_modeset_readout_hw_state] [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A
>[drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:22:DP-1] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:23:HDMI-A-1] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:25:DP-2] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled
>[drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: D
>[drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 1, gmch_m: 4909083, gmch_n: 8388608, link_m: 272726, link_n: 524288, tu: 64
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
>[drm:intel_dump_crtc_timings] crtc timings: 140449 1920 1980 2016 2092 1080 1083 1088 1116, type: 0x0 flags: 0x5
>[drm:intel_dump_pipe_config] port clock: 270000
>[drm:intel_dump_pipe_config] pipe src size: 720x400
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B
>[drm:intel_dump_pipe_config] cpu_transcoder: B
>[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[drm:intel_dump_pipe_config] port clock: 0
>[drm:intel_dump_pipe_config] pipe src size: 0x0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C
>[drm:intel_dump_pipe_config] cpu_transcoder: C
>[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[drm:intel_dump_pipe_config] port clock: 0
>[drm:intel_dump_pipe_config] pipe src size: 0x0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[drm:check_crtc_state] [CRTC:5]
>[drm:check_crtc_state] [CRTC:8]
>[drm:check_crtc_state] [CRTC:11]
>[drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 2560, size 0xfa000
>[drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=fa000
>[drm:i915_pages_create_for_stolen] offset=0x0, size=1024000
>[drm:intel_alloc_plane_obj] plane fb obj ffff88032b237e40
>[drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + fa000
>[drm:i915_gem_setup_global_gtt] clearing unused GTT space: [fa000, 7ffff000]
>[drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[drm:i915_gem_context_init] HW context support initialized
>[drm:init_status_page] render ring hws offset: 0x7fff0000
>[drm:init_pipe_control] render ring pipe control offset: 0x0012b000
>[drm:init_status_page] bsd ring hws offset: 0x0012c000
>[drm:init_status_page] blitter ring hws offset: 0x0014d000
>[drm:init_status_page] video enhancement ring hws offset: 0x0016e000
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1]
>[drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[drm:intel_dp_probe_oui] Sink OUI: 4ce000
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 29:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 32:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 33:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 30:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1]
>[drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
>[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] disconnected
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2]
>[drm:intel_dp_detect] [CONNECTOR:25:DP-2]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2] disconnected
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[drm:drm_setup_crtcs] 
>[drm:drm_enable_connectors] connector 14 enabled? yes
>[drm:drm_enable_connectors] connector 22 enabled? yes
>[drm:drm_enable_connectors] connector 23 enabled? no
>[drm:drm_enable_connectors] connector 25 enabled? no
>[drm:drm_enable_connectors] connector 26 enabled? no
>[drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1
>[drm:intel_fb_initial_config] connector eDP-1 on pipe 65 [CRTC:5]: 1920x1080
>[drm:intel_fb_initial_config] connector DP-1 has no encoder or crtc, skipping
>[drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[drm:intel_fb_initial_config] fallback: Not all outputs enabled
>[drm:intel_fb_initial_config] Enabled: 1, detected: 2
>[drm:intel_fb_initial_config] Not using firmware configuration
>[drm:drm_target_preferred] looking for cmdline mode on connector 14
>[drm:drm_target_preferred] looking for preferred mode on connector 14
>[drm:drm_target_preferred] found mode 1920x1080
>[drm:drm_target_preferred] looking for cmdline mode on connector 22
>[drm:drm_target_preferred] looking for preferred mode on connector 22
>[drm:drm_target_preferred] found mode 1920x1200
>[drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5
>[drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 8
>[drm:intelfb_create] no BIOS fb, allocating a new one
>[drm:i915_gem_object_create_stolen] creating stolen object: size=8ca000
>[drm:i915_pages_create_for_stolen] offset=0xfa000, size=9216000
>[drm:intelfb_create] allocated 1920x1200 fb: 0x00190000, bo ffff88032abe3e40
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:5] [FB:41] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
>[drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 140100KHz
>[drm:intel_dp_compute_config] using min 1 lanes per VBT
>[drm:intel_dp_compute_config] using min 0a link bw per VBT
>[drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[drm:intel_dp_compute_config] DP link bw required 252180 available 432000
>[drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: D
>[drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 1, gmch_m: 4896849, gmch_n: 8388608, link_m: 272047, link_n: 524288, tu: 64
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[drm:intel_dump_crtc_timings] crtc timings: 140100 1920 1980 2016 2092 1080 1083 1088 1116, type: 0x48 flags: 0x9
>[drm:intel_dump_pipe_config] port clock: 270000
>[drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 1
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[drm:intel_edp_backlight_off] 
>[drm:intel_edp_panel_off] Turn eDP power off
>[drm:wait_panel_off] Wait for panel power off time
>[drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[drm:wait_panel_status] Wait complete
>[drm:intel_update_fbc] no output, disabling
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm:intel_display_power_put] disabling display
>[drm:hsw_set_power_well] Requesting to disable the power well
>[drm:intel_ddi_put_crtc_pll] Disabling WRPLL 1
>[drm:ironlake_update_primary_plane] Writing base 00190000 00000000 0 0 7680
>[drm:intel_edp_panel_on] Turn eDP power on
>[drm:wait_panel_power_cycle] Wait for panel power cycle
>[drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
>[drm:wait_panel_status] Wait complete
>[drm:wait_panel_on] Wait for panel power on
>[drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd0003
>[drm:wait_panel_status] Wait complete
>[drm:_edp_panel_vdd_on] Turning eDP VDD on
>[drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[drm:intel_dp_start_link_train] clock recovery OK
>[drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[drm:intel_edp_backlight_on] 
>[drm:intel_panel_enable_backlight] pipe A
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 851
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
>[drm:intel_update_fbc] disabled per chip default
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[drm:check_crtc_state] [CRTC:5]
>[drm:check_crtc_state] [CRTC:8]
>[drm:check_crtc_state] [CRTC:11]
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
>[drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
>[drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
>[drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[drm:connected_sink_compute_bpp] [CONNECTOR:22:DP-1] checking for sink bpp constrains
>[drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 0a pixel clock 154000KHz
>[drm:intel_dp_compute_config] DP link bw 06 lane count 4 clock 162000 bpp 24
>[drm:intel_dp_compute_config] DP link bw required 369600 available 518400
>[drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe B
>[drm:intel_dump_pipe_config] cpu_transcoder: B
>[drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 1, gmch_m: 5980766, gmch_n: 8388608, link_m: 249198, link_n: 262144, tu: 64
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:intel_dump_crtc_timings] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x48 flags: 0x9
>[drm:intel_dump_pipe_config] port clock: 162000
>[drm:intel_dump_pipe_config] pipe src size: 1920x1200
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_display_power_get] enabling display
>[drm:hsw_set_power_well] Enabling power well
>[drm:ironlake_update_primary_plane] Writing base 00190000 00000000 0 0 7680
>[drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[drm:intel_dp_start_link_train] clock recovery OK
>[drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[drm:intel_update_fbc] more than one pipe active, disabling compression
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
>[drm:intel_connector_check_state] [CONNECTOR:22:DP-1]
>[drm:check_encoder_state] [ENCODER:13:TMDS-13]
>[drm:check_encoder_state] [ENCODER:21:TMDS-21]
>[drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[drm:check_crtc_state] [CRTC:5]
>[drm:check_crtc_state] [CRTC:8]
>[drm:check_crtc_state] [CRTC:11]
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:intel_crtc_set_config] [CRTC:5] [FB:41] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[drm:i915_gem_open] 
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:5] [FB:41] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:i915_gem_open] 
>[drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1]
>[drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[drm:intel_dp_probe_oui] Sink OUI: 4ce000
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 29:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 32:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 33:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 30:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1]
>[drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1]
>[drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2]
>[drm:intel_dp_detect] [CONNECTOR:25:DP-2]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2]
>[drm:intel_dp_detect] [CONNECTOR:25:DP-2]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[drm:drm_mode_addfb] [FB:42]
>[drm:drm_mode_addfb] [FB:42]
>[drm:drm_mode_addfb] [FB:43]
>[drm:drm_mode_setcrtc] [CRTC:5]
>[drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1]
>[drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:ironlake_update_primary_plane] Writing base 00A5A000 00000000 0 0 7680
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm:drm_mode_setcrtc] [CRTC:5]
>[drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1]
>[drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:drm_mode_setcrtc] [CRTC:8]
>[drm:drm_mode_setcrtc] [CONNECTOR:22:DP-1]
>[drm:intel_crtc_set_config] [CRTC:8] [FB:43] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:ironlake_update_primary_plane] Writing base 01243000 00000000 0 0 7680
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm:drm_mode_setcrtc] [CRTC:8]
>[drm:drm_mode_setcrtc] [CONNECTOR:22:DP-1]
>[drm:intel_crtc_set_config] [CRTC:8] [FB:43] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[drm:intel_backlight_device_update_status] updating intel_backlight, brightness=851/851
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 851
>[drm:i915_gem_open] 
>[drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[drm:i915_gem_open] 
>[drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_addfb] [FB:44]
>[drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3]
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_cursor_set] cursor off
>[drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[drm:drm_mode_addfb] [FB:44]
>[drm:drm_mode_setcrtc] [CRTC:5]
>[drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1]
>[drm:intel_crtc_set_config] [CRTC:5] [FB:44] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:ironlake_update_primary_plane] Writing base 01B0D000 00000000 0 0 7680
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm:drm_mode_setcrtc] [CRTC:8]
>[drm:drm_mode_setcrtc] [CONNECTOR:22:DP-1]
>[drm:intel_crtc_set_config] [CRTC:8] [FB:44] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:ironlake_update_primary_plane] Writing base 01B0D000 00000000 0 0 7680
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm:drm_mode_setcrtc] [CRTC:11]
>[drm:intel_crtc_set_config] [CRTC:11] [NOFB]
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1]
>[drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[drm:_edp_panel_vdd_on] Turning eDP VDD on
>[drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[drm:intel_dp_probe_oui] Sink OUI: 4ce000
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 29:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 32:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 33:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 30:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1]
>[drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2]
>[drm:intel_dp_detect] [CONNECTOR:25:DP-2]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1]
>[drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[drm:intel_dp_probe_oui] Sink OUI: 4ce000
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 29:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 32:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 33:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 30:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[drm:intel_dp_probe_oui] Sink OUI: 4ce000
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:intel_dp_detect] [CONNECTOR:25:DP-2]
>[drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1]
>[drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] disconnected
>[drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
>[drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2]
>[drm:intel_dp_detect] [CONNECTOR:25:DP-2]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:intel_backlight_device_update_status] updating intel_backlight, brightness=426/851
>[drm:intel_panel_actually_set_backlight] set backlight PWM = 426
>[drm:intel_crtc_cursor_set] cursor off
>[drm:intel_crtc_cursor_set] cursor off
>[drm:drm_mode_addfb] [FB:42]
>[drm:drm_mode_setcrtc] [CRTC:5]
>[drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1]
>[drm:intel_crtc_set_config] [CRTC:5] [FB:42] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:ironlake_update_primary_plane] Writing base 041DA000 00000000 0 0 15360
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm:drm_mode_setcrtc] [CRTC:8]
>[drm:drm_mode_setcrtc] [CONNECTOR:22:DP-1]
>[drm:intel_crtc_set_config] [CRTC:8] [FB:42] #connectors=1 (x y) (0 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:ironlake_update_primary_plane] Writing base 041DA000 00000000 0 0 15360
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm:intel_crtc_cursor_set] cursor off
>[drm:drm_mode_setcrtc] [CRTC:8]
>[drm:drm_mode_setcrtc] [CONNECTOR:22:DP-1]
>[drm:intel_crtc_set_config] [CRTC:8] [FB:42] #connectors=1 (x y) (1920 0)
>[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1
>[drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
>[drm:intel_modeset_stage_output_state] [CONNECTOR:22:DP-1] to [CRTC:8]
>[drm:ironlake_update_primary_plane] Writing base 041DA000 FFFFFFFFFFFF2E00 0 0 15360
>[drm:intel_edp_psr_match_conditions] PSR disable by flag
>[drm:i915_gem_open] 
>[drm:i915_gem_context_create_ioctl] HW context 1 created
>[drm:i915_gem_open] 
>[drm:i915_gem_context_create_ioctl] HW context 1 created
>[drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1]
>[drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
>[drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[drm:drm_mode_getconnector] [CONNECTOR:14:?]
>[drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1]
>[drm:intel_dp_detect] [CONNECTOR:22:DP-1]
>[drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[drm:intel_dp_probe_oui] Sink OUI: 4ce000
>[drm:intel_dp_probe_oui] Branch OUI: 000000
>[drm:drm_edid_to_eld] ELD: no CEA Extension found
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 29:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[drm:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 32:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 33:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 30:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 38:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_getconnector] [CONNECTOR:22:?]
>[drm:drm_mode_getconnector] [CONNECTOR:23:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1]
>[drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:25:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2]
>[drm:intel_dp_detect] [CONNECTOR:25:DP-2]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:DP-2] disconnected
>[drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[drm:drm_mode_addfb] [FB:43]
>[drm:drm_mode_addfb] [FB:44]
>[drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[drm:i915_gem_open] 
>[drm:i915_gem_context_create_ioctl] HW context 1 created
>[drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[drm:intel_crtc_cursor_set] cursor off

Actions: View

Attachments on bug 82829: 104922 | 104923 | 104924 | 104925 | 104926

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.