Attachment 107040 Details for Bug 84450 – dmesg

dmesg

gem_concurrent_blit_gpuX-rcs-gpu-read-after-write-interruptible.dmesg (text/plain), 87.66 KB, created by Guo Jinxian on 2014-09-29 06:04:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-09-29 06:04:03 UTC

Size: 87.66 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.17.0-rc6_drm-intel-nightly_7101d8_20140929+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #38 SMP Mon Sep 29 11:27:08 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_09_29/drm-intel-nightly/7101d84020f63f1da7e0c5d021cdd6be4d515de5/bzImage_x86_64 root=/dev/sda3 drm.debug=0xe modules_path=kernels//nightly_parents/2014_09_29/drm-intel-nightly/7101d84020f63f1da7e0c5d021cdd6be4d515de5/modules_x86_64/lib/modules/3.17.0-rc6_drm-intel-nightly_7101d8_20140929+ kexec_jump_back_entry=0x00035e7e
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x00000000000957ff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000095800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bc6bcfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bc6bd000-0x00000000bcebcfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000bcebd000-0x00000000bcfbcfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000bcfbd000-0x00000000bcffefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013dffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.6 present.
>[    0.000000] DMI: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.22 12/22/2011
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x13e000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 080000000 mask FC0000000 write-back
>[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
>[    0.000000]   4 base 0BD800000 mask FFF800000 uncachable
>[    0.000000]   5 base 100000000 mask FC0000000 write-back
>[    0.000000]   6 base 13E000000 mask FFE000000 uncachable
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff88000008f000] 8f000 size 24576
>[    0.000000] reserving inaccessible SNB gfx pages
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x033b6000, 0x033b6fff] PGTABLE
>[    0.000000] BRK [0x033b7000, 0x033b7fff] PGTABLE
>[    0.000000] BRK [0x033b8000, 0x033b8fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x13de00000-0x13dffffff]
>[    0.000000]  [mem 0x13de00000-0x13dffffff] page 2M
>[    0.000000] BRK [0x033b9000, 0x033b9fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13ddfffff]
>[    0.000000]  [mem 0x13c000000-0x13ddfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
>[    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xbc6bcfff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0xbc5fffff] page 2M
>[    0.000000]  [mem 0xbc600000-0xbc6bcfff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xbcfff000-0xbcffffff]
>[    0.000000]  [mem 0xbcfff000-0xbcffffff] page 4k
>[    0.000000] BRK [0x033ba000, 0x033bafff] PGTABLE
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F2F60 000024 (v02 HPQOEM)
>[    0.000000] ACPI: XSDT 0x00000000BCFFE120 000074 (v01 HPQOEM SLIC-MPC 0000000F      01000013)
>[    0.000000] ACPI: FACP 0x00000000BCFFC000 0000F4 (v03 HPQOEM 161C     0000000F HP   00000001)
>[    0.000000] ACPI: DSDT 0x00000000BCFD1000 025281 (v02 HPQOEM 161C     00000001 INTL 20060912)
>[    0.000000] ACPI: FACS 0x00000000BCF97000 000040
>[    0.000000] ACPI: HPET 0x00000000BCFFB000 000038 (v01 HPQOEM 161C     00000001 HP   00000001)
>[    0.000000] ACPI: APIC 0x00000000BCFFA000 0000BC (v01 HPQOEM 161C     00000001 HP   00000001)
>[    0.000000] ACPI: MCFG 0x00000000BCFF9000 00003C (v01 HPQOEM 161C     00000001 HP   00000001)
>[    0.000000] ACPI: SSDT 0x00000000BCFCE000 000266 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
>[    0.000000] ACPI: SSDT 0x00000000BCFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
>[    0.000000] ACPI: SLIC 0x00000000BCFCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
>[    0.000000] ACPI: SSDT 0x00000000BCFCB000 000852 (v01 PmRef  Cpu0Ist  00003000 INTL 20060912)
>[    0.000000] ACPI: SSDT 0x00000000BCFCA000 0009B1 (v01 PmRef  CpuPm    00003000 INTL 20060912)
>[    0.000000] ACPI: ASF! 0x00000000BCFF8000 0000A5 (v32 HPQOEM 161C     00000001 HP   00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013dffffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13dffffff]
>[    0.000000]   NODE_DATA [mem 0x13dff9000-0x13dffcfff]
>[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880139600000-ffff88013d5fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x13dffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x00094fff]
>[    0.000000]   node   0: [mem 0x00100000-0xbc6bcfff]
>[    0.000000]   node   0: [mem 0xbcfff000-0xbcffffff]
>[    0.000000]   node   0: [mem 0x100000000-0x13dffffff]
>[    0.000000] On node 0 totalpages: 1025618
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 148 pages reserved
>[    0.000000]   DMA zone: 3988 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 11995 pages used for memmap
>[    0.000000]   DMA32 zone: 767678 pages, LIFO batch:31
>[    0.000000]   Normal zone: 3968 pages used for memmap
>[    0.000000]   Normal zone: 253952 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00095000-0x00095fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00096000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbc6bd000-0xbcebcfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcebd000-0xbcfbcfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbcfbd000-0xbcffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbf9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
>[    0.000000] e820: [mem 0xbfa00000-0xdfffffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013dc00000 s78528 r8192 d23872 u262144
>[    0.000000] pcpu-alloc: s78528 r8192 d23872 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009443
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_09_29/drm-intel-nightly/7101d84020f63f1da7e0c5d021cdd6be4d515de5/bzImage_x86_64 root=/dev/sda3 drm.debug=0xe modules_path=kernels//nightly_parents/2014_09_29/drm-intel-nightly/7101d84020f63f1da7e0c5d021cdd6be4d515de5/modules_x86_64/lib/modules/3.17.0-rc6_drm-intel-nightly_7101d8_20140929+ kexec_jump_back_entry=0x00035e7e
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3932704K/4102472K available (7720K kernel code, 894K rwdata, 3940K rodata, 23332K init, 624K bss, 169768K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:488 0
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2593.818 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.63 BogoMIPS (lpj=2593818)
>[    0.000194] pid_max: default: 32768 minimum: 301
>[    0.000293] ACPI: Core revision 20140724
>[    0.011888] ACPI: All ACPI Tables successfully acquired
>[    0.012086] Security Framework initialized
>[    0.012412] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.013527] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.014065] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.014167] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.014487] CPU: Physical Processor ID: 0
>[    0.014581] CPU: Processor Core ID: 0
>[    0.014677] mce: CPU supports 7 MCE banks
>[    0.014777] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.014785] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>[    0.015070] Freeing SMP alternatives memory: 32K (ffffffff83310000 - ffffffff83318000)
>[    0.015697] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.025800] smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (fam: 06, model: 2a, stepping: 07)
>[    0.026072] TSC deadline timer enabled
>[    0.026092] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
>[    0.026455] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
>[    0.026603] ... version:                3
>[    0.026696] ... bit width:              48
>[    0.026789] ... generic registers:      4
>[    0.026882] ... value mask:             0000ffffffffffff
>[    0.026977] ... max period:             0000ffffffffffff
>[    0.027072] ... fixed-purpose events:   3
>[    0.027167] ... event mask:             000000070000000f
>[    0.027515] x86: Booting SMP configuration:
>[    0.027610] .... node  #0, CPUs:      #1
>[    0.038872] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.041032]  #2
>[    0.052301] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.065595]  #3
>[    0.065596] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.067694] x86: Booted up 1 node, 4 CPUs
>[    0.067880] smpboot: Total of 4 processors activated (20750.54 BogoMIPS)
>[    0.070538] devtmpfs: initialized
>[    0.070933] PM: Registering ACPI NVS region [mem 0xbcebd000-0xbcfbcfff] (1048576 bytes)
>[    0.071306] xor: automatically using best checksumming function:
>[    0.081419]    avx       : 19780.000 MB/sec
>[    0.081540] RTC time:  5:51:05, date: 09/29/14
>[    0.081719] NET: Registered protocol family 16
>[    0.082005] cpuidle: using governor ladder
>[    0.082101] cpuidle: using governor menu
>[    0.083630] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.083777] ACPI: bus type PCI registered
>[    0.083944] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.084094] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.084365] PCI: Using configuration type 1 for base access
>[    0.104577] raid6: sse2x1    7078 MB/s
>[    0.121600] raid6: sse2x2    8710 MB/s
>[    0.138619] raid6: sse2x4    9980 MB/s
>[    0.138713] raid6: using algorithm sse2x4 (9980 MB/s)
>[    0.138808] raid6: using ssse3x2 recovery algorithm
>[    0.138943] ACPI: Added _OSI(Module Device)
>[    0.139038] ACPI: Added _OSI(Processor Device)
>[    0.139131] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.139226] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.142505] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.153783] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.174928] ACPI: Dynamic OEM Table Load:
>[    0.175106] ACPI: SSDT 0xFFFF88013835F000 00074D (v01 PmRef  Cpu0Cst  00003001 INTL 20060912)
>[    0.178075] ACPI: Dynamic OEM Table Load:
>[    0.178251] ACPI: SSDT 0xFFFF880137CA8C00 000303 (v01 PmRef  ApIst    00003000 INTL 20060912)
>[    0.181957] ACPI: Dynamic OEM Table Load:
>[    0.182132] ACPI: SSDT 0xFFFF880137D3C800 000119 (v01 PmRef  ApCst    00003000 INTL 20060912)
>[    0.619380] ACPI: Interpreter enabled
>[    0.619480] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
>[    0.619710] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
>[    0.619949] ACPI: (supports S0 S3 S4 S5)
>[    0.620043] ACPI: Using IOAPIC for interrupt routing
>[    0.620164] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.621861] ACPI: Power Resource [APPR] (off)
>[    0.625955] ACPI: Power Resource [COMP] (off)
>[    0.626293] ACPI: Power Resource [LPP] (on)
>[    0.629674] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.629775] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.631389] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.632069] PCI host bridge to bus 0000:00
>[    0.632165] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.632262] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.632359] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.632457] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.632559] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff]
>[    0.632657] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
>[    0.632756] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
>[    0.632861] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
>[    0.632942] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
>[    0.632952] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
>[    0.632957] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.632961] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
>[    0.633060] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>[    0.633083] pci 0000:00:16.0: reg 0x10: [mem 0xd4824000-0xd482400f 64bit]
>[    0.633159] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.633233] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
>[    0.633251] pci 0000:00:16.3: reg 0x10: [io  0x4090-0x4097]
>[    0.633261] pci 0000:00:16.3: reg 0x14: [mem 0xd482b000-0xd482bfff]
>[    0.633400] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>[    0.633418] pci 0000:00:19.0: reg 0x10: [mem 0xd4800000-0xd481ffff]
>[    0.633427] pci 0000:00:19.0: reg 0x14: [mem 0xd482a000-0xd482afff]
>[    0.633436] pci 0000:00:19.0: reg 0x18: [io  0x4060-0x407f]
>[    0.633498] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.633535] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.633678] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>[    0.633698] pci 0000:00:1a.0: reg 0x10: [mem 0xd4829000-0xd48293ff]
>[    0.633787] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.633827] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.633966] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>[    0.633983] pci 0000:00:1b.0: reg 0x10: [mem 0xd4820000-0xd4823fff 64bit]
>[    0.634056] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.634129] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>[    0.634210] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.634284] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
>[    0.634364] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.634402] pci 0000:00:1c.1: System wakeup disabled by ACPI
>[    0.634537] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
>[    0.634617] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.634659] pci 0000:00:1c.2: System wakeup disabled by ACPI
>[    0.634795] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
>[    0.634877] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.634915] pci 0000:00:1c.3: System wakeup disabled by ACPI
>[    0.635054] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
>[    0.635134] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
>[    0.635173] pci 0000:00:1c.7: System wakeup disabled by ACPI
>[    0.635313] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>[    0.635333] pci 0000:00:1d.0: reg 0x10: [mem 0xd4828000-0xd48283ff]
>[    0.635422] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.635458] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.635595] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
>[    0.635766] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
>[    0.635784] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
>[    0.635792] pci 0000:00:1f.2: reg 0x14: [io  0x409c-0x409f]
>[    0.635800] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
>[    0.635808] pci 0000:00:1f.2: reg 0x1c: [io  0x4098-0x409b]
>[    0.635817] pci 0000:00:1f.2: reg 0x20: [io  0x4040-0x405f]
>[    0.635826] pci 0000:00:1f.2: reg 0x24: [mem 0xd4827000-0xd48277ff]
>[    0.635872] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.635995] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.636095] pci 0000:00:1c.0:   bridge window [mem 0xd4700000-0xd47fffff]
>[    0.636154] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
>[    0.636252] pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
>[    0.636256] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd3ffffff]
>[    0.636263] pci 0000:00:1c.1:   bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref]
>[    0.636347] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010
>[    0.636382] pci 0000:23:00.0: reg 0x10: [mem 0xd4600000-0xd46007ff]
>[    0.636405] pci 0000:23:00.0: reg 0x14: [mem 0xd4605000-0xd46050ff]
>[    0.636697] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000
>[    0.636729] pci 0000:23:00.1: reg 0x10: [mem 0xd4604000-0xd46040ff]
>[    0.636835] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
>[    0.637013] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501
>[    0.637045] pci 0000:23:00.2: reg 0x10: [mem 0xd4603000-0xd46030ff]
>[    0.638687] pci 0000:00:1c.2: PCI bridge to [bus 23]
>[    0.638819] pci 0000:00:1c.2:   bridge window [mem 0xd4600000-0xd46fffff]
>[    0.638826] pci 0000:00:1c.2:   bridge window [mem 0xbfd00000-0xbfdfffff 64bit pref]
>[    0.638920] pci 0000:24:00.0: [8086:0085] type 00 class 0x028000
>[    0.638970] pci 0000:24:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
>[    0.639204] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
>[    0.639245] pci 0000:24:00.0: System wakeup disabled by ACPI
>[    0.640698] pci 0000:00:1c.3: PCI bridge to [bus 24]
>[    0.640829] pci 0000:00:1c.3:   bridge window [mem 0xd4500000-0xd45fffff]
>[    0.640916] pci 0000:25:00.0: [1033:0194] type 00 class 0x0c0330
>[    0.640945] pci 0000:25:00.0: reg 0x10: [mem 0xd4400000-0xd4401fff 64bit]
>[    0.641092] pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
>[    0.642700] pci 0000:00:1c.7: PCI bridge to [bus 25]
>[    0.642832] pci 0000:00:1c.7:   bridge window [mem 0xd4400000-0xd44fffff]
>[    0.642878] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.643805] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15), disabled.
>[    0.644503] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
>[    0.645203] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15), disabled.
>[    0.645900] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
>[    0.646633] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15), disabled.
>[    0.647328] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.648063] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15), disabled.
>[    0.648755] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.649772] ACPI: Enabled 5 GPEs in block 00 to 3F
>[    0.649986] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>[    0.650160] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.650257] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.650407] vgaarb: loaded
>[    0.650499] vgaarb: bridge control possible 0000:00:02.0
>[    0.650668] SCSI subsystem initialized
>[    0.650806] libata version 3.00 loaded.
>[    0.650849] ACPI: bus type USB registered
>[    0.650973] usbcore: registered new interface driver usbfs
>[    0.651079] usbcore: registered new interface driver hub
>[    0.651193] usbcore: registered new device driver usb
>[    0.651320] pps_core: LinuxPPS API ver. 1 registered
>[    0.651415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.651570] PTP clock support registered
>[    0.651752] PCI: Using ACPI for IRQ routing
>[    0.658350] PCI: pci_cache_line_size set to 64 bytes
>[    0.658418] e820: reserve RAM buffer [mem 0x00095800-0x0009ffff]
>[    0.658420] e820: reserve RAM buffer [mem 0xbc6bd000-0xbfffffff]
>[    0.658421] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
>[    0.658423] e820: reserve RAM buffer [mem 0x13e000000-0x13fffffff]
>[    0.658561] NetLabel: Initializing
>[    0.658654] NetLabel:  domain hash size = 128
>[    0.658748] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.658854] NetLabel:  unlabeled traffic allowed by default
>[    0.659053] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.659502] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.661627] Switched to clocksource hpet
>[    0.664919] pnp: PnP ACPI init
>[    0.665197] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.665305] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
>[    0.665405] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.665504] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved
>[    0.665603] system 00:00: [mem 0xbfa00000-0xbfa00fff] has been reserved
>[    0.665717] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.665816] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.665915] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.666014] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.666113] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.666214] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.666329] system 00:01: [io  0xfe00-0xfe0f] has been reserved
>[    0.666434] system 00:01: [io  0xfe80-0xfe8f] has been reserved
>[    0.666532] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.666638] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.666723] system 00:02: [io  0x0200-0x027f] has been reserved
>[    0.666828] system 00:02: [io  0x1000-0x100f] has been reserved
>[    0.666926] system 00:02: [io  0xffff] has been reserved
>[    0.667023] system 00:02: [io  0xffff] has been reserved
>[    0.667120] system 00:02: [io  0x0400-0x047f] could not be reserved
>[    0.667218] system 00:02: [io  0x0500-0x057f] has been reserved
>[    0.667316] system 00:02: [io  0xef80-0xef9f] has been reserved
>[    0.667414] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.667448] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.667815] pnp 00:04: [dma 0 disabled]
>[    0.667887] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
>[    0.667924] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.667961] pnp 00:06: Plug and Play ACPI device, IDs SYN017b SYN0100 SYN0002 PNP0f13 (active)
>[    0.668326] pnp: PnP ACPI: found 7 devices
>[    0.675415] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window
>[    0.675614] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.675726] pci 0000:00:1c.0:   bridge window [mem 0xd4700000-0xd47fffff]
>[    0.675831] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
>[    0.675929] pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
>[    0.676030] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd3ffffff]
>[    0.676131] pci 0000:00:1c.1:   bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref]
>[    0.676287] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4608000-0xd460ffff pref]
>[    0.676434] pci 0000:00:1c.2: PCI bridge to [bus 23]
>[    0.676533] pci 0000:00:1c.2:   bridge window [mem 0xd4600000-0xd46fffff]
>[    0.676638] pci 0000:00:1c.2:   bridge window [mem 0xbfd00000-0xbfdfffff 64bit pref]
>[    0.676792] pci 0000:00:1c.3: PCI bridge to [bus 24]
>[    0.676892] pci 0000:00:1c.3:   bridge window [mem 0xd4500000-0xd45fffff]
>[    0.676996] pci 0000:00:1c.7: PCI bridge to [bus 25]
>[    0.677095] pci 0000:00:1c.7:   bridge window [mem 0xd4400000-0xd44fffff]
>[    0.677201] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.677203] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.677204] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.677206] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff]
>[    0.677208] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
>[    0.677210] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
>[    0.677212] pci_bus 0000:01: resource 1 [mem 0xd4700000-0xd47fffff]
>[    0.677214] pci_bus 0000:02: resource 0 [io  0x2000-0x3fff]
>[    0.677215] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff]
>[    0.677217] pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref]
>[    0.677219] pci_bus 0000:23: resource 1 [mem 0xd4600000-0xd46fffff]
>[    0.677221] pci_bus 0000:23: resource 2 [mem 0xbfd00000-0xbfdfffff 64bit pref]
>[    0.677222] pci_bus 0000:24: resource 1 [mem 0xd4500000-0xd45fffff]
>[    0.677224] pci_bus 0000:25: resource 1 [mem 0xd4400000-0xd44fffff]
>[    0.677252] NET: Registered protocol family 2
>[    0.677522] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.677760] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.677948] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.678064] TCP: reno registered
>[    0.678163] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.678275] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.678427] NET: Registered protocol family 1
>[    0.678589] RPC: Registered named UNIX socket transport module.
>[    0.678699] RPC: Registered udp transport module.
>[    0.678794] RPC: Registered tcp transport module.
>[    0.678889] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.678995] pci 0000:00:02.0: Video device with shadowed ROM
>[    0.679703] PCI: CLS 64 bytes, default 64
>[    1.057879] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.057991] software IO TLB [mem 0xb86bd000-0xbc6bd000] (64MB) mapped at [ffff8800b86bd000-ffff8800bc6bcfff]
>[    1.058412] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
>[    1.059279] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    1.059426] audit: initializing netlink subsys (disabled)
>[    1.059531] audit: type=2000 audit(1411969866.049:1): initialized
>[    1.059902] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.062292] VFS: Disk quotas dquot_6.5.2
>[    1.062426] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.063333] NFS: Registering the id_resolver key type
>[    1.063440] Key type id_resolver registered
>[    1.063535] Key type id_legacy registered
>[    1.063632] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    1.063939] fuse init (API version 7.23)
>[    1.064142] msgmni has been set to 7681
>[    1.064498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    1.066010] io scheduler noop registered
>[    1.066105] io scheduler deadline registered
>[    1.066232] io scheduler cfq registered (default)
>[    1.066567] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
>[    1.066769] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
>[    1.066990] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
>[    1.067180] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
>[    1.067261] pcieport 0000:00:1c.7: irq 28 for MSI/MSI-X
>[    1.067372] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>[    1.067476] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>[    1.067494] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
>[    1.067595] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
>[    1.067612] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
>[    1.067711] pci 0000:23:00.0: Signaling PME through PCIe PME interrupt
>[    1.067810] pci 0000:23:00.1: Signaling PME through PCIe PME interrupt
>[    1.067919] pci 0000:23:00.2: Signaling PME through PCIe PME interrupt
>[    1.068021] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
>[    1.068038] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
>[    1.068137] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
>[    1.068238] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
>[    1.068255] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
>[    1.068354] pci 0000:25:00.0: Signaling PME through PCIe PME interrupt
>[    1.068454] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
>[    1.068462] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.068888] Monitor-Mwait will be used to enter C-1 state
>[    1.068911] Monitor-Mwait will be used to enter C-2 state
>[    1.068922] ACPI: acpi_idle registered with cpuidle
>[    1.093116] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.093215] ACPI: Thermal Zone [CPUZ] (50 C)
>[    1.117884] thermal LNXTHERM:01: registered as thermal_zone1
>[    1.117999] ACPI: Thermal Zone [GFXZ] (0 C)
>[    1.134629] thermal LNXTHERM:02: registered as thermal_zone2
>[    1.134728] ACPI: Thermal Zone [EXTZ] (44 C)
>[    1.149453] thermal LNXTHERM:03: registered as thermal_zone3
>[    1.149551] ACPI: Thermal Zone [LOCZ] (40 C)
>[    1.164264] thermal LNXTHERM:04: registered as thermal_zone4
>[    1.164361] ACPI: Thermal Zone [BATZ] (32 C)
>[    1.164705] thermal LNXTHERM:05: registered as thermal_zone5
>[    1.164802] ACPI: Thermal Zone [PCHZ] (0 C)
>[    1.164964] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.185979] 0000:00:16.3: ttyS0 at I/O 0x4090 (irq = 17, base_baud = 115200) is a 16550A
>[    1.186355] Non-volatile memory driver v1.3
>[    1.186463] Linux agpgart interface v0.103
>[    1.187995] brd: module loaded
>[    1.188152] Loading iSCSI transport class v2.0-870.
>[    1.188440] iscsi: registered transport (tcp)
>[    1.188675] Adaptec aacraid driver 1.2-0[30300]-ms
>[    1.188794] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.188960] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
>[    1.189168] iscsi: registered transport (qla4xxx)
>[    1.189285] QLogic iSCSI HBA Driver
>[    1.189410] DC390: clustering now enabled by default. If you get problems load
>[    1.189567]        with "disable_clustering=1" and report to maintainers
>[    1.189689] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.189828] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.189953] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.190102] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.190220] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.190437] SCSI Media Changer driver v0.25 
>[    1.190588] ahci 0000:00:1f.2: version 3.0
>[    1.190751] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
>[    1.190774] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    1.201045] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl RAID mode
>[    1.201221] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
>[    1.207638] scsi host0: ahci
>[    1.207840] scsi host1: ahci
>[    1.208058] scsi host2: ahci
>[    1.208266] scsi host3: ahci
>[    1.208451] scsi host4: ahci
>[    1.208652] scsi host5: ahci
>[    1.208797] ata1: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827100 irq 29
>[    1.208944] ata2: DUMMY
>[    1.209056] ata3: DUMMY
>[    1.209148] ata4: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827280 irq 29
>[    1.209295] ata5: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827300 irq 29
>[    1.209442] ata6: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827380 irq 29
>[    1.210715] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
>[    1.211041] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.211147] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.211259] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.211365] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.211536] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.211640] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    1.211919] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.212114] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
>[    1.414692] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.414805] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e4:11:5b:3a:d7:25
>[    1.414953] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.415097] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
>[    1.415232] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.13-k
>[    1.415349] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.415474] usbcore: registered new interface driver catc
>[    1.415595] usbcore: registered new interface driver kaweth
>[    1.415701] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.415856] usbcore: registered new interface driver pegasus
>[    1.415969] usbcore: registered new interface driver rtl8150
>[    1.416084] usbcore: registered new interface driver asix
>[    1.416214] usbcore: registered new interface driver ax88179_178a
>[    1.416337] usbcore: registered new interface driver cdc_ether
>[    1.416450] usbcore: registered new interface driver dm9601
>[    1.416562] usbcore: registered new interface driver gl620a
>[    1.416674] usbcore: registered new interface driver net1080
>[    1.416786] usbcore: registered new interface driver plusb
>[    1.416900] usbcore: registered new interface driver rndis_host
>[    1.417013] usbcore: registered new interface driver cdc_subset
>[    1.417138] usbcore: registered new interface driver zaurus
>[    1.417248] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.417424] usbcore: registered new interface driver cdc_ncm
>[    1.417611] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.417715] ehci-pci: EHCI PCI platform driver
>[    1.417955] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    1.418096] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    1.418283] ehci-pci 0000:00:1a.0: debug port 2
>[    1.422280] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    1.422295] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4829000
>[    1.428193] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    1.428358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.428457] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.428605] usb usb1: Product: EHCI Host Controller
>[    1.428699] usb usb1: Manufacturer: Linux 3.17.0-rc6_drm-intel-nightly_7101d8_20140929+ ehci_hcd
>[    1.428848] usb usb1: SerialNumber: 0000:00:1a.0
>[    1.429058] hub 1-0:1.0: USB hub found
>[    1.429179] hub 1-0:1.0: 3 ports detected
>[    1.429526] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    1.429672] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.429836] ehci-pci 0000:00:1d.0: debug port 2
>[    1.433821] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    1.433826] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4828000
>[    1.439214] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.439373] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.439472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.439619] usb usb2: Product: EHCI Host Controller
>[    1.439713] usb usb2: Manufacturer: Linux 3.17.0-rc6_drm-intel-nightly_7101d8_20140929+ ehci_hcd
>[    1.439862] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.440066] hub 2-0:1.0: USB hub found
>[    1.440203] hub 2-0:1.0: 3 ports detected
>[    1.440439] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.440554] ohci-pci: OHCI PCI platform driver
>[    1.440661] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.440846] xhci_hcd 0000:25:00.0: xHCI Host Controller
>[    1.440985] xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 3
>[    1.441332] xhci_hcd 0000:25:00.0: irq 31 for MSI/MSI-X
>[    1.441336] xhci_hcd 0000:25:00.0: irq 32 for MSI/MSI-X
>[    1.441339] xhci_hcd 0000:25:00.0: irq 33 for MSI/MSI-X
>[    1.441342] xhci_hcd 0000:25:00.0: irq 34 for MSI/MSI-X
>[    1.441345] xhci_hcd 0000:25:00.0: irq 35 for MSI/MSI-X
>[    1.441466] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.441564] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.441712] usb usb3: Product: xHCI Host Controller
>[    1.441807] usb usb3: Manufacturer: Linux 3.17.0-rc6_drm-intel-nightly_7101d8_20140929+ xhci_hcd
>[    1.441956] usb usb3: SerialNumber: 0000:25:00.0
>[    1.442165] hub 3-0:1.0: USB hub found
>[    1.442286] hub 3-0:1.0: 2 ports detected
>[    1.442450] xhci_hcd 0000:25:00.0: xHCI Host Controller
>[    1.442583] xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 4
>[    1.444754] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.444863] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.445010] usb usb4: Product: xHCI Host Controller
>[    1.445105] usb usb4: Manufacturer: Linux 3.17.0-rc6_drm-intel-nightly_7101d8_20140929+ xhci_hcd
>[    1.445269] usb usb4: SerialNumber: 0000:25:00.0
>[    1.445455] hub 4-0:1.0: USB hub found
>[    1.445578] hub 4-0:1.0: 2 ports detected
>[    1.445777] usbcore: registered new interface driver usb-storage
>[    1.445933] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.448009] i8042: Detected active multiplexing controller, rev 1.1
>[    1.448875] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.448971] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    1.449089] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    1.449238] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    1.449360] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    1.449559] mousedev: PS/2 mouse device common for all mice
>[    1.449762] rtc_cmos 00:03: RTC can wake from S4
>[    1.449994] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    1.450124] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.451649] i2c /dev entries driver
>[    1.451773] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.452119] usbcore: registered new interface driver usbhid
>[    1.452281] usbhid: USB HID core driver
>[    1.452484] TCP: cubic registered
>[    1.452579] Initializing XFRM netlink socket
>[    1.452676] NET: Registered protocol family 17
>[    1.452793] Key type dns_resolver registered
>[    1.453295] registered taskstats version 1
>[    1.453856] Btrfs loaded
>[    1.454370]   Magic number: 14:66:872
>[    1.454574] PM: Hibernation image not present or could not be loaded.
>[    1.454585] Warning: unable to open an initial console.
>[    1.473843] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.514273] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.535641] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.545384] ata1.00: ATA-8: ST9500423AS, 0001SDM5, max UDMA/133
>[    1.545515] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>[    1.589852] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.590350] ata1.00: configured for UDMA/133
>[    1.592586] scsi 0:0:0:0: Direct-Access     ATA      ST9500423AS      SDM5 PQ: 0 ANSI: 5
>[    1.593111] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>[    1.593113] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.593422] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[    1.593626] sd 0:0:0:0: [sda] Write Protect is off
>[    1.593725] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.593789] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.624113]  sda: sda1 sda2 sda3
>[    1.624584] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.731486] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.846266] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.846365] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.846814] hub 1-1:1.0: USB hub found
>[    1.847281] hub 1-1:1.0: 6 ports detected
>[    1.898516] ata4: SATA link down (SStatus 0 SControl 300)
>[    1.951522] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    2.060613] tsc: Refined TSC clocksource calibration: 2594.106 MHz
>[    2.066385] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    2.066483] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.066950] hub 2-1:1.0: USB hub found
>[    2.067219] hub 2-1:1.0: 8 ports detected
>[    2.171678] usb 3-1: new high-speed USB device number 2 using xhci_hcd
>[    2.203719] ata5: SATA link down (SStatus 0 SControl 300)
>[    2.318599] usb 3-1: New USB device found, idVendor=0b95, idProduct=7720
>[    2.318737] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.318835] usb 3-1: Product: AX88772 
>[    2.318928] usb 3-1: SerialNumber: 00CC2C
>[    2.389031] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5
>[    2.508910] ata6: SATA link down (SStatus 0 SControl 300)
>[    2.512911] Freeing unused kernel memory: 23332K (ffffffff81c47000 - ffffffff83310000)
>[    2.542714] dracut: dracut-018-35.git20120510.fc17
>[    2.566882] udevd[1306]: starting version 182
>[    2.580485] [drm] Initialized drm 1.1.0 20060810
>[    2.581376] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9
>[    2.584580] ACPI: Sleep Button [SLPB]
>[    2.584779] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
>[    2.585252] ACPI: Lid Switch [LID]
>[    2.585434] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
>[    2.585805] ACPI: Power Button [PWRF]
>[    2.589503] [drm:i915_dump_device_info] i915 device info: gen=6, pciid=0x0126 rev=0x09 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,
>[    2.589522] [drm:intel_detect_pch] Found CougarPoint PCH
>[    2.589570] [drm] Memory usable by graphics device = 2048M
>[    2.589671] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    2.589672] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    2.589673] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    2.589673] [drm] Replacing VGA console driver
>[    2.590788] Console: switching to colour dummy device 80x25
>[    2.591593] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbcf94018
>[    2.591604] [drm:intel_opregion_setup] Public ACPI methods supported
>[    2.591606] [drm:intel_opregion_setup] SWSCI supported
>[    2.596954] [drm:swsci_setup] SWSCI GBDA callbacks 000000b3, SBCB callbacks 00000081
>[    2.596963] [drm:intel_opregion_setup] ASLE supported
>[    2.597079] i915 0000:00:02.0: irq 36 for MSI/MSI-X
>[    2.597087] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.597091] [drm] Driver supports precise vblank timestamp query.
>[    2.597095] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    2.597097] [drm:validate_vbt] Using VBT from OpRegion: $VBT SANDYBRIDGE-M  d
>[    2.597100] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.597101] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    2.597103] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    2.597105] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    2.597108] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 0 107800 1600 1664 1706 1970 900 903 906 912 0x8 0xa
>[    2.597110] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
>[    2.597112] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 1500 Hz, active high, min brightness 8, level 0
>[    2.597114] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    2.597116] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.597117] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    2.597119] [drm:parse_driver_features] DRRS State Enabled:1
>[    2.597128] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    2.597134] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at bda00000
>[    2.597136] [drm:intel_display_power_get] enabling always-on
>[    2.597178] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
>[    2.597180] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    2.597183] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    2.597185] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    2.597188] [drm:intel_print_wm_latency] Sprite WM0 latency 7 (0.7 usec)
>[    2.597190] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    2.597192] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    2.597194] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    2.597196] [drm:intel_print_wm_latency] Cursor WM0 latency 7 (0.7 usec)
>[    2.597198] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    2.597199] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    2.597201] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    2.597203] [drm:snb_wm_latency_quirk] WM latency values increased to avoid potential underruns
>[    2.597205] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec)
>[    2.597207] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    2.597209] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    2.597211] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    2.597213] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec)
>[    2.597215] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    2.597217] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    2.597220] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    2.597222] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec)
>[    2.597224] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    2.597226] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    2.597228] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    2.597231] [drm:intel_modeset_init] 2 display pipes available.
>[    2.597244] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.610466] [drm:intel_lvds_init] using preferred mode from EDID: 
>[    2.610478] [drm:drm_mode_debug_printmodeline] Modeline 17:"1600x900" 60 107800 1600 1664 1706 1970 900 903 906 912 0x48 0xa
>[    2.610490] [drm:intel_lvds_init] detected dual-link lvds configuration
>[    2.610584] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 487/648, sysfs interface registered
>[    2.610632] [drm:intel_crt_reset] pch crt adpa set to 0xf40000
>[    2.610638] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    2.611122] [drm:intel_sdvo_read_byte] i2c transfer returned -6
>[    2.611125] [drm:intel_sdvo_init] No SDVO device found on SDVOB
>[    2.611185] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    2.611250] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    2.611299] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    2.611527] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    2.611568] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2
>[    2.611659] [drm:intel_dp_init_connector] Adding DP connector on port D
>[    2.611710] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-3
>[    2.611790] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0
>[    2.611794] [drm:ironlake_init_pch_refclk] Using SSC on panel
>[    2.612214] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled
>[    2.612216] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled
>[    2.612221] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 1, on 1
>[    2.612226] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
>[    2.612231] [drm:intel_modeset_readout_hw_state] [ENCODER:15:LVDS-15] hw state readout: enabled, pipe A
>[    2.612234] [drm:intel_modeset_readout_hw_state] [ENCODER:23:DAC-23] hw state readout: disabled, pipe A
>[    2.612237] [drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A
>[    2.612240] [drm:intel_modeset_readout_hw_state] [ENCODER:29:TMDS-29] hw state readout: disabled, pipe A
>[    2.612243] [drm:intel_modeset_readout_hw_state] [ENCODER:31:TMDS-31] hw state readout: disabled, pipe A
>[    2.612246] [drm:intel_modeset_readout_hw_state] [ENCODER:33:TMDS-33] hw state readout: disabled, pipe A
>[    2.612249] [drm:intel_modeset_readout_hw_state] [ENCODER:35:TMDS-35] hw state readout: disabled, pipe A
>[    2.612252] [drm:intel_modeset_readout_hw_state] [ENCODER:37:TMDS-37] hw state readout: disabled, pipe A
>[    2.612255] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:LVDS-1] hw state readout: enabled
>[    2.612258] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:VGA-1] hw state readout: disabled
>[    2.612261] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:HDMI-A-1] hw state readout: disabled
>[    2.612264] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:DP-1] hw state readout: disabled
>[    2.612266] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-2] hw state readout: disabled
>[    2.612269] [drm:intel_modeset_readout_hw_state] [CONNECTOR:34:HDMI-A-3] hw state readout: disabled
>[    2.612272] [drm:intel_modeset_readout_hw_state] [CONNECTOR:36:DP-2] hw state readout: disabled
>[    2.612275] [drm:intel_modeset_readout_hw_state] [CONNECTOR:38:DP-3] hw state readout: disabled
>[    2.612278] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A
>[    2.612279] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    2.612281] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[    2.612283] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 1883941, gmch_n: 8388608, link_m: 209326, link_n: 524288, tu: 64
>[    2.612285] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.612287] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.612288] [drm:intel_dump_pipe_config] requested mode:
>[    2.612290] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    2.612291] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.612293] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    2.612296] [drm:intel_dump_crtc_timings] crtc timings: 108214 1600 1664 1706 1970 900 903 906 912, type: 0x0 flags: 0xa
>[    2.612297] [drm:intel_dump_pipe_config] port clock: 108214
>[    2.612298] [drm:intel_dump_pipe_config] pipe src size: 720x400
>[    2.612300] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.612302] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x06400384, enabled
>[    2.612303] [drm:intel_dump_pipe_config] ips: 0
>[    2.612304] [drm:intel_dump_pipe_config] double wide: 0
>[    2.612306] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    2.612309] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    2.612310] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    2.612313] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    2.612315] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B
>[    2.612316] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    2.612317] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    2.612319] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.612321] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.612322] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.612323] [drm:intel_dump_pipe_config] requested mode:
>[    2.612325] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.612326] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.612328] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.612330] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.612331] [drm:intel_dump_pipe_config] port clock: 0
>[    2.612333] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    2.612334] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.612336] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.612337] [drm:intel_dump_pipe_config] ips: 0
>[    2.612338] [drm:intel_dump_pipe_config] double wide: 0
>[    2.612342] [drm:intel_connector_check_state] [CONNECTOR:14:LVDS-1]
>[    2.612351] [drm:check_encoder_state] [ENCODER:15:LVDS-15]
>[    2.612353] [drm:check_encoder_state] [ENCODER:23:DAC-23]
>[    2.612356] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    2.612359] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[    2.612361] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
>[    2.612364] [drm:check_encoder_state] [ENCODER:33:TMDS-33]
>[    2.612367] [drm:check_encoder_state] [ENCODER:35:TMDS-35]
>[    2.612369] [drm:check_encoder_state] [ENCODER:37:TMDS-37]
>[    2.612372] [drm:check_crtc_state] [CRTC:8]
>[    2.612385] [drm:check_crtc_state] [CRTC:12]
>[    2.612386] [drm:check_shared_dpll_state] PCH DPLL A
>[    2.612391] [drm:check_shared_dpll_state] PCH DPLL B
>[    2.612398] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 4096, size 0x190000
>[    2.612400] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=190000
>[    2.612404] [drm:i915_pages_create_for_stolen] offset=0x0, size=1638400
>[    2.612408] [drm:intel_alloc_plane_obj] plane fb obj ffff880002bd0000
>[    2.612411] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 190000
>[    2.612413] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [190000, 7ffff000]
>[    2.614544] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    2.614933] [drm:i915_gem_context_init] HW context support initialized
>[    2.614939] [drm:init_status_page] render ring hws offset: 0x7fff2000
>[    2.616976] [drm:intel_init_pipe_control] render ring pipe control offset: 0x001b0000
>[    2.616992] [drm:init_status_page] bsd ring hws offset: 0x001b1000
>[    2.617073] [drm:init_status_page] blitter ring hws offset: 0x001d2000
>[    2.617148] [drm:gen6_check_mch_setup] Wrong MCH_SSKPD value: 0x16040307 This can cause underruns.
>[    2.617193] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:LVDS-1]
>[    2.617195] [drm:intel_lvds_detect] [CONNECTOR:14:LVDS-1]
>[    2.617206] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:LVDS-1] probed modes :
>[    2.617209] [drm:drm_mode_debug_printmodeline] Modeline 17:"1600x900" 60 107800 1600 1664 1706 1970 900 903 906 912 0x48 0xa
>[    2.617211] [drm:drm_mode_debug_printmodeline] Modeline 18:"1600x900" 40 71870 1600 1664 1706 1970 900 903 906 912 0x40 0xa
>[    2.617213] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:VGA-1]
>[    2.617215] [drm:intel_crt_detect] [CONNECTOR:22:VGA-1] force=1
>[    2.617219] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[    2.625862] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.626942] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    2.626945] [drm:intel_crt_detect] CRT not detected via hotplug
>[    2.627125] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    2.627128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    2.627130] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.627131] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    2.627513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    2.627515] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    2.627516] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    2.627518] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:VGA-1] disconnected
>[    2.627520] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-1]
>[    2.627522] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-1]
>[    2.627682] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    2.627684] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.627685] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-1] disconnected
>[    2.627687] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:DP-1]
>[    2.627688] [drm:intel_dp_detect] [CONNECTOR:30:DP-1]
>[    2.627692] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:DP-1] disconnected
>[    2.627693] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-2]
>[    2.627694] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-2]
>[    2.627853] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    2.627854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.627856] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-2] disconnected
>[    2.627857] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:HDMI-A-3]
>[    2.627858] [drm:intel_hdmi_detect] [CONNECTOR:34:HDMI-A-3]
>[    2.628015] [drm:asle_set_backlight] bclp = 0x8000000d
>[    2.628017] [drm:asle_set_backlight] updating opregion backlight 13/255
>[    2.628020] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    2.628021] [drm:intel_panel_actually_set_backlight] set backlight PWM = 33
>[    2.628024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    2.628027] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:HDMI-A-3] disconnected
>[    2.628029] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:DP-2]
>[    2.628030] [drm:intel_dp_detect] [CONNECTOR:36:DP-2]
>[    2.628034] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:DP-2] disconnected
>[    2.628036] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:DP-3]
>[    2.628037] [drm:intel_dp_detect] [CONNECTOR:38:DP-3]
>[    2.628040] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:DP-3] disconnected
>[    2.628041] [drm:drm_setup_crtcs] 
>[    2.628043] [drm:drm_enable_connectors] connector 14 enabled? yes
>[    2.628044] [drm:drm_enable_connectors] connector 22 enabled? no
>[    2.628045] [drm:drm_enable_connectors] connector 25 enabled? no
>[    2.628046] [drm:drm_enable_connectors] connector 30 enabled? no
>[    2.628048] [drm:drm_enable_connectors] connector 32 enabled? no
>[    2.628049] [drm:drm_enable_connectors] connector 34 enabled? no
>[    2.628050] [drm:drm_enable_connectors] connector 36 enabled? no
>[    2.628051] [drm:drm_enable_connectors] connector 38 enabled? no
>[    2.628053] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
>[    2.628054] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1
>[    2.628056] [drm:intel_fb_initial_config] connector LVDS-1 on pipe A [CRTC:8]: 1600x900
>[    2.628058] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    2.628059] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    2.628060] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    2.628062] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    2.628063] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping
>[    2.628064] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    2.628065] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping
>[    2.628067] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 8
>[    2.628069] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    2.628071] [drm:i915_gem_object_create_stolen] creating stolen object: size=57f000
>[    2.628076] [drm:i915_pages_create_for_stolen] offset=0x190000, size=5763072
>[    2.628202] [drm:asle_set_backlight] bclp = 0x800000f5
>[    2.628214] [drm:asle_set_backlight] updating opregion backlight 245/255
>[    2.628216] [drm:intel_panel_actually_set_backlight] set backlight PWM = 622
>[    2.628289] acpi device:0b: registered as cooling_device4
>[    2.628423] asix 3-1:1.0 eth1: register 'asix' at usb-0000:25:00.0-1, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:90:99
>[    2.628429] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
>[    2.628663] [drm] Initialized i915 1.6.0 20140919 for 0000:00:02.0 on minor 0
>[    2.629079] [drm:intelfb_create] allocated 1600x900 fb: 0x001f4000, bo ffff8800b83e4000
>[    2.629194] fbcon: inteldrmfb (fb0) is primary device
>[    2.629246] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[    2.629249] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    2.629251] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.629254] [drm:drm_mode_debug_printmodeline] Modeline 40:"1600x900" 60 107800 1600 1664 1706 1970 900 903 906 912 0x48 0xa
>[    2.629256] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1
>[    2.629258] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[    2.629261] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    2.629263] [drm:connected_sink_compute_bpp] [CONNECTOR:14:LVDS-1] checking for sink bpp constrains
>[    2.629265] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
>[    2.629268] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1
>[    2.629269] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[    2.629271] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[    2.629272] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    2.629273] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[    2.629275] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3767883, gmch_n: 4194304, link_m: 209326, link_n: 524288, tu: 64
>[    2.629277] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.629279] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.629280] [drm:intel_dump_pipe_config] requested mode:
>[    2.629282] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 107800 1600 1664 1706 1970 900 903 906 912 0x48 0xa
>[    2.629284] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.629287] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 107800 1600 1664 1706 1970 900 903 906 912 0x48 0xa
>[    2.629289] [drm:intel_dump_crtc_timings] crtc timings: 107800 1600 1664 1706 1970 900 903 906 912, type: 0x48 flags: 0xa
>[    2.629290] [drm:intel_dump_pipe_config] port clock: 107800
>[    2.629291] [drm:intel_dump_pipe_config] pipe src size: 1600x900
>[    2.629293] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.629294] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.629295] [drm:intel_dump_pipe_config] ips: 0
>[    2.629296] [drm:intel_dump_pipe_config] double wide: 0
>[    2.629310] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    2.691203] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
>[    2.778356] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c
>[    2.778358] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>[    2.778359] usb 1-1.1: SerialNumber: 00a06237368b
>[    2.851418] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
>[    2.877159] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 8
>[    2.877164] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[    2.877576] [drm:intel_update_fbc] no output, disabling
>[    2.877583] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz
>[    2.877608] [drm:intel_get_shared_dpll] CRTC:8 dropping existing PCH DPLL A
>[    2.877609] [drm:intel_get_shared_dpll] CRTC:8 allocated PCH DPLL A
>[    2.877610] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
>[    2.877611] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
>[    2.878972] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x700
>[    2.878974] [drm:gen6_fdi_link_train] FDI train 1 done.
>[    2.879630] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600
>[    2.879631] [drm:gen6_fdi_link_train] FDI train 2 done.
>[    2.879631] [drm:gen6_fdi_link_train] FDI train done.
>[    2.879633] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 8
>[    2.879634] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
>[    2.943003] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c077
>[    2.943008] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.943024] usb 2-1.2: Product: USB Optical Mouse
>[    2.943027] usb 2-1.2: Manufacturer: Logitech
>[    2.945450] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C077.0001/input/input13
>[    2.945574] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
>[    3.018416] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
>[    3.061449] Switched to clocksource tsc
>[    3.241215] usb 2-1.4: New USB device found, idVendor=1bcf, idProduct=2805
>[    3.241220] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.241224] usb 2-1.4: Product: HP HD Webcam [Fixed]
>[    3.241227] usb 2-1.4: Manufacturer: DCPME029I2D3HW
>[    3.289114] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400, board id: 1623, fw id: 790122
>[    3.314429] [drm:intel_panel_enable_backlight] pipe A
>[    3.314436] [drm:intel_panel_actually_set_backlight] set backlight PWM = 622
>[    3.314948] [drm:ironlake_update_primary_plane] Writing base 001F4000 00000000 0 0 6400
>[    3.314950] [drm:intel_update_fbc] disabled per chip default
>[    3.314954] [drm:intel_connector_check_state] [CONNECTOR:14:LVDS-1]
>[    3.314963] [drm:check_encoder_state] [ENCODER:15:LVDS-15]
>[    3.314965] [drm:check_encoder_state] [ENCODER:23:DAC-23]
>[    3.314967] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
>[    3.314968] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[    3.314970] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
>[    3.314972] [drm:check_encoder_state] [ENCODER:33:TMDS-33]
>[    3.314973] [drm:check_encoder_state] [ENCODER:35:TMDS-35]
>[    3.314974] [drm:check_encoder_state] [ENCODER:37:TMDS-37]
>[    3.314976] [drm:check_crtc_state] [CRTC:8]
>[    3.314987] [drm:check_crtc_state] [CRTC:12]
>[    3.314988] [drm:check_shared_dpll_state] PCH DPLL A
>[    3.314992] [drm:check_shared_dpll_state] PCH DPLL B
>[    3.315004] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    3.315006] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    3.315007] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[    3.315013] Console: switching to colour frame buffer device 200x56
>[    3.315022] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[    3.315023] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.315025] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[    3.321063] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    3.321101] i915 0000:00:02.0: registered panic notifier
>[    3.334215] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
>[    3.414513] Linux video capture interface: v2.00
>[    3.415340] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (1bcf:2805)
>[    3.433226] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input14
>[    3.433365] usbcore: registered new interface driver uvcvideo
>[    3.433412] USB Video Class driver (1.1.1)
>[    3.435692] dracut: Starting plymouth daemon
>[    3.441782] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[    3.441786] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.441788] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[    3.452743] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[    3.452747] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.452749] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[    3.486655] usb 2-1.8: new full-speed USB device number 5 using ehci-pci
>[    3.539759] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    3.539991] ACPI: AC Adapter [AC] (on-line)
>[    3.569070] parport_pc 00:04: reported by Plug and Play ACPI
>[    3.571442] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
>[    3.577560] snd_hda_intel 0000:00:1b.0: irq 37 for MSI/MSI-X
>[    3.580851] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
>[    3.581459] usb 2-1.8: New USB device found, idVendor=058f, idProduct=9540
>[    3.581461] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.581462] usb 2-1.8: Product: EMV Smartcard Reader
>[    3.581463] usb 2-1.8: Manufacturer: Generic
>[    3.588194] input: PC Speaker as /devices/platform/pcspkr/input/input15
>[    3.596486] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.596762] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    3.596768] ACPI: Battery Slot [BAT0] (battery present)
>[    3.596870] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    3.596876] ACPI: Battery Slot [BAT1] (battery absent)
>[    3.597327] wmi: Mapper loaded
>[    3.608548] ppdev: user-space parallel port driver
>[    3.613493] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
>[    3.616055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.618242] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
>[    3.618243] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.618247] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
>[    3.618248] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.618249] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    3.618295] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[    3.618300] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.618302] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[    3.618997] iTCO_vendor_support: vendor-support=0
>[    3.619124] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    3.619160] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
>[    3.619439] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    3.630347] sound hdaudioC0D0: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
>[    3.630349] sound hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
>[    3.630351] sound hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
>[    3.630353] sound hdaudioC0D0:    mono: mono_out=0x0
>[    3.630354] sound hdaudioC0D0:    inputs:
>[    3.630356] sound hdaudioC0D0:      Mic=0xc
>[    3.630358] sound hdaudioC0D0:      Internal Mic=0x11
>[    3.630359] sound hdaudioC0D0:      Line=0xf
>[    3.633637] firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
>[    3.706018] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    3.709370] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    3.710639] [drm:gen6_enable_rps] Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz
>[    4.135172] firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400
>[    4.143441] dracut: Checking ext4: /dev/sda3
>[    4.145751] dracut: issuing e2fsck -a  /dev/sda3
>[    4.172167] random: nonblocking pool is initialized
>[    4.359529] dracut: /dev/sda3: clean, 654674/30269440 files, 10330277/121070080 blocks
>[    4.362041] dracut: Remounting /dev/sda3 with -o ro
>[    4.425390] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    4.507416] dracut: Mounted root filesystem /dev/sda3
>[    4.588917] device-mapper: uevent: version 1.0.3
>[    4.591137] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    4.764803] dracut: Switching root
>[    5.486125] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    5.639116] systemd[1]: Failed to insert module 'ipv6'
>[    5.653860] systemd[1]: Set hostname to <x-hnr9>.
>[    6.087807] LVM: Logical Volume autoactivation enabled.
>[    6.089928] LVM: Activation generator successfully completed.
>[    6.905604] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
>[    6.907772] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    6.909905] systemd[1]: Starting Syslog Socket.
>[    6.914018] systemd[1]: Listening on Syslog Socket.
>[    6.916046] systemd[1]: Starting Collect Read-Ahead Data...
>[    6.920420] systemd[1]: Starting Replay Read-Ahead Data...
>[    6.924714] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>[    6.928711] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    6.930697] systemd[1]: Starting Delayed Shutdown Socket.
>[    6.934605] systemd[1]: Listening on Delayed Shutdown Socket.
>[    6.936642] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>[    6.939267] systemd-readahead[2623]: Failed to create fanotify object: Function not implemented
>[    6.939410] systemd-readahead[2624]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    6.944563] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    6.946425] systemd[1]: Starting Encrypted Volumes.
>[    6.949970] systemd[1]: Reached target Encrypted Volumes.
>[    6.951766] systemd[1]: Starting Journal Socket.
>[    6.955286] systemd[1]: Listening on Journal Socket.
>[    6.957054] systemd[1]: Mounting Huge Pages File System...
>[    6.960813] systemd[1]: Mounting Debug File System...
>[    6.964535] systemd[1]: Starting Journal Service...
>[    6.970169] systemd[1]: Started Journal Service.
>[    6.972112] systemd[1]: Starting udev Kernel Socket.
>[    6.975625] systemd[1]: Listening on udev Kernel Socket.
>[    6.977384] systemd[1]: Starting udev Control Socket.
>[    6.980809] systemd[1]: Listening on udev Control Socket.
>[    6.982565] systemd[1]: Starting udev Coldplug all Devices...
>[    6.986327] systemd[1]: Mounting POSIX Message Queue File System...
>[    6.990034] systemd[1]: Starting Create static device nodes in /dev...
>[    6.993750] systemd[1]: Starting LVM2 metadata daemon socket.
>[    6.997151] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    6.998809] systemd[1]: Starting Device-mapper event daemon FIFOs.
>[    7.002119] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    7.003835] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    7.007621] systemd[1]: Expecting device dev-disk-by\x2duuid-14ea2c79\x2d5fc9\x2d4225\x2d9a78\x2d9338f73d5674.device...
>[    7.011200] systemd[1]: Mounting Temporary Directory...
>[    7.234646] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    7.236802] systemd[1]: Expecting device dev-disk-by\x2duuid-12eb7ede\x2dd8ad\x2d4941\x2d9a92\x2d2dbf5cbd808b.device...
>[    7.242794] systemd[1]: Started Replay Read-Ahead Data.
>[    7.244751] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
>[    7.248750] systemd[1]: Started Collect Read-Ahead Data.
>[    7.294857] systemd[1]: Starting Load legacy module configuration...
>[    7.299037] systemd[1]: Started File System Check on Root Device.
>[    7.300942] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    7.418221] systemd[1]: Starting Apply Kernel Variables...
>[    7.442863] systemd[1]: Started Load Kernel Modules.
>[    7.444720] systemd[1]: Mounted Configuration File System.
>[    7.446511] systemd[1]: Mounting FUSE Control File System...
>[    7.450371] systemd[1]: Starting Setup Virtual Console...
>[    7.557193] systemd[1]: Started Set Up Additional Binary Formats.
>[    8.106728] systemd-journald[2628]: Vacuuming done, freed 0 bytes
>[    8.294989] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[    8.294992] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    8.294994] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[    8.304838] EXT4-fs (sda3): re-mounted. Opts: (null)
>[    8.708068] systemd-udevd[3594]: starting version 204
>[    9.769352] e1000e 0000:00:19.0 enp0s25: renamed from eth0
>[    9.780751] systemd-udevd[3610]: renamed network interface eth0 to enp0s25
>[    9.827760] asix 3-1:1.0 enp37s0u1: renamed from eth1
>[    9.832777] systemd-udevd[3600]: renamed network interface eth1 to enp37s0u1
>[   12.104174] Adding 2047996k swap on /dev/sda2.  Priority:-1 extents:1 across:2047996k 
>[   14.349846] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[   14.539320] audit: type=1305 audit(1411969879.520:2): audit_pid=3657 old=0 auid=4294967295 ses=4294967295 res=1
>[   14.599953] alsactl[3673]: segfault at 1 ip 0000003289c4888d sp 00007fff3dd11460 error 4 in libc-2.17.so[3289c00000+1b5000]
>[   17.767085] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
>[   17.868041] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
>[   18.673302] asix 3-1:1.0 enp37s0u1: link down
>[   20.244721] asix 3-1:1.0 enp37s0u1: link up, 100Mbps, full-duplex, lpa 0x43E1
>[   21.763598] systemd-journald[2628]: Received request to flush runtime journal from PID 1
>[   21.966488] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[   21.966491] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   21.966493] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[   53.061352] gem_concurrent_blit: executing
>[   53.061475] [drm:i915_gem_open] 
>[   53.061796] [drm:i915_gem_open] 
>[   53.097268] gem_concurrent_blit: starting subtest gpuX-rcs-gpu-read-after-write-interruptible
>[   59.750395] [drm] stuck on render ring
>[   59.751174] [drm] GPU HANG: ecode 0:0x85fffffc, in gem_concurrent_ [4101], reason: Ring hung, action: reset
>[   59.751239] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[   59.751307] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[   59.751384] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[   59.751462] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[   59.751530] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[   59.751621] [drm:i915_error_work_func] resetting chip
>[   59.753390] [drm:init_status_page] render ring hws offset: 0x7fff2000
>[   59.753406] [drm:init_status_page] bsd ring hws offset: 0x001b1000
>[   59.753417] [drm:init_status_page] blitter ring hws offset: 0x001d2000
>[   59.753443] [drm:ironlake_update_primary_plane] Writing base 001F4000 00000000 0 0 6400
>[   59.894697] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[   59.894704] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   59.894706] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[   59.894709] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[   59.894711] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[   59.894713] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[   61.751945] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[   61.755735] [drm:gen6_enable_rps] Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz
>[   63.171957] usb 2-1.2: USB disconnect, device number 3
>[   64.629779] usb 2-1.2: new low-speed USB device number 6 using ehci-pci
>[   64.720351] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c077
>[   64.720451] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   64.720494] usb 2-1.2: Product: USB Optical Mouse
>[   64.720523] usb 2-1.2: Manufacturer: Logitech
>[   64.722861] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C077.0002/input/input16
>[   64.723156] hid-generic 0003:046D:C077.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
>[   64.785452] gem_concurrent_blit: executing
>[   64.785548] [drm:i915_gem_open] 
>[   64.785880] [drm:i915_gem_open] 
>[   64.820909] gem_concurrent_blit: starting subtest gpuX-rcs-gpu-read-after-write
>[   70.757621] [drm] stuck on render ring
>[   70.758402] [drm] GPU HANG: ecode 0:0x85fffffc, in gem_concurrent_ [4135], reason: Ring hung, action: reset
>[   70.758518] [drm:i915_error_work_func] resetting chip
>[   70.760607] [drm:init_status_page] render ring hws offset: 0x7fff2000
>[   70.760624] [drm:init_status_page] bsd ring hws offset: 0x001b1000
>[   70.760636] [drm:init_status_page] blitter ring hws offset: 0x001d2000
>[   70.760663] [drm:ironlake_update_primary_plane] Writing base 001F4000 00000000 0 0 6400
>[   70.839120] [drm:intel_crtc_set_config] [CRTC:8] [FB:41] #connectors=1 (x y) (0 0)
>[   70.839127] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   70.839129] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[   70.839132] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[   70.839134] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[   70.839135] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
>[   72.759149] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[   72.762918] [drm:gen6_enable_rps] Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz

Actions: View

Attachments on bug 84450: 107040 | 107048

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.