Attachment 108489 Details for Bug 85497 – dmesg

dmesg

gem_userptr_blits.dmesg (text/plain), 80.73 KB, created by Guo Jinxian on 2014-10-27 05:20:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Guo Jinxian

Created: 2014-10-27 05:20:40 UTC

Size: 80.73 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.18.0-rc1_drm-intel-nightly_88a443_20141027+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #902 SMP Mon Oct 27 11:24:22 CST 2014
>[    0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_10_27/drm-intel-nightly/88a443f454a4d8f779a9bff51f2ef334f5f69372/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_10_27/drm-intel-nightly/88a443f454a4d8f779a9bff51f2ef334f5f69372/modules_x86_64/lib/modules/3.18.0-rc1_drm-intel-nightly_88a443_20141027+ acpi_rsdp=0x79518014
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000008efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000078ad8fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000078ad9000-0x00000000793d8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000793d9000-0x00000000794d8fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000794d9000-0x0000000079518fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x0000000079519000-0x0000000079ffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FF800000 mask FFF800000 write-protect
>[    0.000000]   1 base 000000000 mask FC0000000 write-back
>[    0.000000]   2 base 040000000 mask FE0000000 write-back
>[    0.000000]   3 base 060000000 mask FF0000000 write-back
>[    0.000000]   4 base 070000000 mask FF8000000 write-back
>[    0.000000]   5 base 078000000 mask FFC000000 write-back
>[    0.000000]   6 base 07B000000 mask FFF000000 uncachable
>[    0.000000]   7 base 07AE00000 mask FFFE00000 uncachable
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>[    0.000000] Base memory trampoline at [ffff880000043000] 43000 size 24576
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x033d0000, 0x033d0fff] PGTABLE
>[    0.000000] BRK [0x033d1000, 0x033d1fff] PGTABLE
>[    0.000000] BRK [0x033d2000, 0x033d2fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x79e00000-0x79ffffff]
>[    0.000000]  [mem 0x79e00000-0x79ffffff] page 2M
>[    0.000000] BRK [0x033d3000, 0x033d3fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x78000000-0x78ad8fff]
>[    0.000000]  [mem 0x78000000-0x789fffff] page 2M
>[    0.000000]  [mem 0x78a00000-0x78ad8fff] page 4k
>[    0.000000] BRK [0x033d4000, 0x033d4fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x79519000-0x79dfffff]
>[    0.000000]  [mem 0x79519000-0x795fffff] page 4k
>[    0.000000]  [mem 0x79600000-0x79dfffff] page 2M
>[    0.000000] BRK [0x033d5000, 0x033d5fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff]
>[    0.000000]  [mem 0x20100000-0x201fffff] page 4k
>[    0.000000]  [mem 0x20200000-0x77ffffff] page 2M
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x0000000079518014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000795170E8 00008C (v01 INTEL  EDK2     00000003      01000013)
>[    0.000000] ACPI: FACP 0x0000000079515000 00010C (v05 INTEL  EDK2     00000003 VLV2 0100000D)
>[    0.000000] ACPI: DSDT 0x0000000079505000 00BA5F (v02 INTEL  EDK2     00000003 VLV2 0100000D)
>[    0.000000] ACPI: FACS 0x0000000079478000 000040
>[    0.000000] ACPI: SSDT 0x0000000079516000 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20120518)
>[    0.000000] ACPI: UEFI 0x0000000079481000 000042 (v01                 00000000      00000000)
>[    0.000000] ACPI: HPET 0x0000000079514000 000038 (v01 INTEL  EDK2     00000003 VLV2 0100000D)
>[    0.000000] ACPI: LPIT 0x0000000079513000 000104 (v01 INTEL  EDK2     00000003 VLV2 0100000D)
>[    0.000000] ACPI: APIC 0x0000000079512000 000084 (v03 INTEL  EDK2     00000003 VLV2 0100000D)
>[    0.000000] ACPI: MCFG 0x0000000079511000 00003C (v01 INTEL  EDK2     00000003 VLV2 0100000D)
>[    0.000000] ACPI: SSDT 0x00000000794FF000 0007E8 (v01 INTEL  SgPch    00000003 VLV2 0100000D)
>[    0.000000] ACPI: SSDT 0x00000000794FE000 000763 (v01 PmRef  CpuPm    00003000 INTL 20120518)
>[    0.000000] ACPI: SSDT 0x00000000794FD000 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20120518)
>[    0.000000] ACPI: SSDT 0x00000000794FC000 00017A (v01 PmRef  ApTst    00003000 INTL 20120518)
>[    0.000000] ACPI: SSDT 0x00000000794FB000 0003E6 (v01 Intel_ IsctTabl 00001000 INTL 20120518)
>[    0.000000] ACPI: FPDT 0x00000000794FA000 000044 (v01 INTEL  EDK2     00000003 VLV2 0100000D)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x79ffb000-0x79ffefff]
>[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076a00000-ffff8800789fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0008efff]
>[    0.000000]   node   0: [mem 0x00090000-0x0009dfff]
>[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
>[    0.000000]   node   0: [mem 0x20100000-0x78ad8fff]
>[    0.000000]   node   0: [mem 0x79519000-0x79ffffff]
>[    0.000000] Initmem setup node 0 [mem 0x00001000-0x79ffffff]
>[    0.000000] On node 0 totalpages: 496732
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 105 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7744 pages used for memmap
>[    0.000000]   DMA32 zone: 492736 pages, LIFO batch:31
>[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
>[    0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x78ad9000-0x793d8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x793d9000-0x794d8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x794d9000-0x79518fff]
>[    0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880079c00000 s78592 r8192 d32000 u524288
>[    0.000000] pcpu-alloc: s78592 r8192 d32000 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 488819
>[    0.000000] Policy zone: DMA32
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_10_27/drm-intel-nightly/88a443f454a4d8f779a9bff51f2ef334f5f69372/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_10_27/drm-intel-nightly/88a443f454a4d8f779a9bff51f2ef334f5f69372/modules_x86_64/lib/modules/3.18.0-rc1_drm-intel-nightly_88a443_20141027+ acpi_rsdp=0x79518014
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 1916448K/1986928K available (7771K kernel code, 906K rwdata, 3952K rodata, 23368K init, 624K bss, 70480K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>[    0.000000] NR_IRQS:4352 nr_irqs:1024 0
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] Maximum core-clock to bus-clock ratio: 0xf
>[    0.000000] Resolved frequency ID: 2, frequency: 133200 KHz
>[    0.000000] TSC runs at 1998000 KHz
>[    0.000000] lapic_timer_frequency = 133200
>[    0.000000] tsc: Detected 1998.000 MHz processor
>[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3996.00 BogoMIPS (lpj=1998000)
>[    0.000014] pid_max: default: 32768 minimum: 301
>[    0.000029] ACPI: Core revision 20140828
>[    0.019348] ACPI: All ACPI Tables successfully acquired
>[    0.019409] Security Framework initialized
>[    0.019631] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.020590] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.021051] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.021068] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.021429] CPU: Physical Processor ID: 0
>[    0.021438] CPU: Processor Core ID: 0
>[    0.027332] mce: CPU supports 6 MCE banks
>[    0.027345] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.027356] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
>[    0.027356] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
>[    0.027521] Freeing SMP alternatives memory: 32K (ffffffff8332b000 - ffffffff83333000)
>[    0.028615] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.038633] smpboot: CPU0: Intel(R) Celeron(R) CPU  N2810  @ 2.00GHz (fam: 06, model: 37, stepping: 03)
>[    0.038663] TSC deadline timer enabled
>[    0.038693] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
>[    0.038714] ... version:                3
>[    0.038719] ... bit width:              40
>[    0.038723] ... generic registers:      2
>[    0.038728] ... value mask:             000000ffffffffff
>[    0.038732] ... max period:             000000ffffffffff
>[    0.038737] ... fixed-purpose events:   3
>[    0.038741] ... event mask:             0000000700000003
>[    0.039354] x86: Booting SMP configuration:
>[    0.039362] .... node  #0, CPUs:      #1
>[    0.056304] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.058464] x86: Booted up 1 node, 2 CPUs
>[    0.058477] smpboot: Total of 2 processors activated (7992.00 BogoMIPS)
>[    0.058977] devtmpfs: initialized
>[    0.059502] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
>[    0.059511] PM: Registering ACPI NVS region [mem 0x793d9000-0x794d8fff] (1048576 bytes)
>[    0.059953] xor: measuring software checksum speed
>[    0.069468]    prefetch64-sse:  6968.000 MB/sec
>[    0.079496]    generic_sse:  6212.000 MB/sec
>[    0.079502] xor: using function: prefetch64-sse (6968.000 MB/sec)
>[    0.079545] RTC time:  3:30:46, date: 10/27/14
>[    0.079786] NET: Registered protocol family 16
>[    0.085526] cpuidle: using governor ladder
>[    0.091539] cpuidle: using governor menu
>[    0.091694] ACPI: bus type PCI registered
>[    0.091770] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.091780] PCI: not using MMCONFIG
>[    0.091785] PCI: Using configuration type 1 for base access
>[    0.114726] raid6: sse2x1     503 MB/s
>[    0.131768] raid6: sse2x2     613 MB/s
>[    0.148791] raid6: sse2x4    1031 MB/s
>[    0.148797] raid6: using algorithm sse2x4 (1031 MB/s)
>[    0.148802] raid6: using ssse3x2 recovery algorithm
>[    0.148916] ACPI: Added _OSI(Module Device)
>[    0.148923] ACPI: Added _OSI(Processor Device)
>[    0.148928] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.148933] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.178809] ACPI: Dynamic OEM Table Load:
>[    0.178830] ACPI: SSDT 0xFFFF880075D0E800 00045B (v01 PmRef  Cpu0Ist  00003000 INTL 20120518)
>[    0.179862] ACPI: Dynamic OEM Table Load:
>[    0.179886] ACPI: SSDT 0xFFFF880075D0F000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20120518)
>[    0.191342] ACPI: Dynamic OEM Table Load:
>[    0.191356] ACPI: SSDT 0xFFFF88007588E800 00015F (v01 PmRef  ApIst    00003000 INTL 20120518)
>[    0.197067] ACPI: Dynamic OEM Table Load:
>[    0.197080] ACPI: SSDT 0xFFFF880075EBBB40 00008D (v01 PmRef  ApCst    00003000 INTL 20120518)
>[    0.408056] ACPI: Interpreter enabled
>[    0.408071] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140828/hwxface-580)
>[    0.408085] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140828/hwxface-580)
>[    0.408120] ACPI: (supports S0 S3 S4 S5)
>[    0.408126] ACPI: Using IOAPIC for interrupt routing
>[    0.408172] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.409019] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
>[    0.409188] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.414138] ACPI: Power Resource [USBC] (on)
>[    0.414466] ACPI: Power Resource [PC05] (on)
>[    0.426053] ACPI: Power Resource [PLPE] (on)
>[    0.426358] ACPI: Power Resource [PLPE] (on)
>[    0.432901] ACPI: Power Resource [CLK0] (on)
>[    0.432989] ACPI: Power Resource [CLK1] (on)
>[    0.501384] ACPI: Power Resource [FN00] (off)
>[    0.502435] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.502451] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.502612] \_SB_.PCI0:_OSC invalid UUID
>[    0.502615] _OSC request data:1 1f 0 
>[    0.502623] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.503120] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.503191] PCI host bridge to bus 0000:00
>[    0.503200] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.503208] pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
>[    0.503215] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
>[    0.503222] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.503229] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.503236] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>[    0.503244] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
>[    0.503251] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff]
>[    0.503258] pci_bus 0000:00: root bus resource [mem 0x80000000-0x907ffffe]
>[    0.503275] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
>[    0.503448] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
>[    0.503466] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
>[    0.503480] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
>[    0.503493] pci 0000:00:02.0: reg 0x20: [io  0x2050-0x2057]
>[    0.503676] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
>[    0.503700] pci 0000:00:13.0: reg 0x10: [io  0x2048-0x204f]
>[    0.503712] pci 0000:00:13.0: reg 0x14: [io  0x205c-0x205f]
>[    0.503724] pci 0000:00:13.0: reg 0x18: [io  0x2040-0x2047]
>[    0.503735] pci 0000:00:13.0: reg 0x1c: [io  0x2058-0x205b]
>[    0.503747] pci 0000:00:13.0: reg 0x20: [io  0x2020-0x203f]
>[    0.503759] pci 0000:00:13.0: reg 0x24: [mem 0x90717000-0x907177ff]
>[    0.503816] pci 0000:00:13.0: PME# supported from D3hot
>[    0.503969] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
>[    0.503993] pci 0000:00:14.0: reg 0x10: [mem 0x90700000-0x9070ffff 64bit]
>[    0.504062] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.504157] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.504254] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
>[    0.504284] pci 0000:00:1a.0: reg 0x10: [mem 0x90600000-0x906fffff]
>[    0.504299] pci 0000:00:1a.0: reg 0x14: [mem 0x90500000-0x905fffff]
>[    0.504414] pci 0000:00:1a.0: PME# supported from D0 D3hot
>[    0.504562] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
>[    0.504589] pci 0000:00:1b.0: reg 0x10: [mem 0x90710000-0x90713fff 64bit]
>[    0.504671] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.504808] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
>[    0.504890] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.504961] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.505044] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
>[    0.505119] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.505189] pci 0000:00:1c.1: System wakeup disabled by ACPI
>[    0.505272] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
>[    0.505346] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.505416] pci 0000:00:1c.2: System wakeup disabled by ACPI
>[    0.505499] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
>[    0.505573] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.505644] pci 0000:00:1c.3: System wakeup disabled by ACPI
>[    0.505735] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
>[    0.505954] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
>[    0.505993] pci 0000:00:1f.3: reg 0x10: [mem 0x90714000-0x9071401f]
>[    0.506067] pci 0000:00:1f.3: reg 0x20: [io  0x2000-0x201f]
>[    0.506382] pci 0000:01:00.0: [8086:107d] type 00 class 0x020000
>[    0.506415] pci 0000:01:00.0: reg 0x10: [mem 0x90420000-0x9043ffff]
>[    0.506436] pci 0000:01:00.0: reg 0x14: [mem 0x90400000-0x9041ffff]
>[    0.506455] pci 0000:01:00.0: reg 0x18: [io  0x1000-0x101f]
>[    0.506621] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>[    0.506792] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.506815] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.506824] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.506830] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x904fffff]
>[    0.506915] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.506925] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>[    0.507001] pci 0000:00:1c.2: PCI bridge to [bus 03]
>[    0.507010] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>[    0.507085] pci 0000:00:1c.3: PCI bridge to [bus 04]
>[    0.507095] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
>[    0.507101] pci 0000:00:1c.3:   bridge window [mem 0x90c00000-0x90dfffff]
>[    0.507109] pci 0000:00:1c.3:   bridge window [mem 0x90e00000-0x90ffffff 64bit pref]
>[    0.508514] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.508642] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.508767] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.508900] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.509026] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.509151] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.509283] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.509413] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.511918] ACPI: Enabled 5 GPEs in block 00 to 3F
>[    0.512002] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
>[    0.512233] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.512241] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.512252] vgaarb: loaded
>[    0.512257] vgaarb: bridge control possible 0000:00:02.0
>[    0.512407] SCSI subsystem initialized
>[    0.512509] libata version 3.00 loaded.
>[    0.512601] ACPI: bus type USB registered
>[    0.512665] usbcore: registered new interface driver usbfs
>[    0.512696] usbcore: registered new interface driver hub
>[    0.512726] usbcore: registered new device driver usb
>[    0.512806] pps_core: LinuxPPS API ver. 1 registered
>[    0.512812] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.512833] PTP clock support registered
>[    0.512987] PCI: Using ACPI for IRQ routing
>[    0.514491] PCI: pci_cache_line_size set to 64 bytes
>[    0.514541] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
>[    0.514545] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>[    0.514548] e820: reserve RAM buffer [mem 0x78ad9000-0x7bffffff]
>[    0.514551] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
>[    0.514780] NetLabel: Initializing
>[    0.514786] NetLabel:  domain hash size = 128
>[    0.514791] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.514814] NetLabel:  unlabeled traffic allowed by default
>[    0.514994] Switched to clocksource refined-jiffies
>[    0.521039] pnp: PnP ACPI init
>[    0.521163] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.521552] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.521563] system 00:01: [io  0x0400-0x047f] has been reserved
>[    0.521571] system 00:01: [io  0x0500-0x05fe] has been reserved
>[    0.521578] system 00:01: [io  0x0600-0x061f] has been reserved
>[    0.521587] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.521779] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.521905] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.522018] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
>[    0.522509] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.522520] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
>[    0.522528] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
>[    0.522536] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
>[    0.522543] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved
>[    0.522551] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
>[    0.522559] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
>[    0.522566] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.522574] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
>[    0.522583] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.524573] pnp: PnP ACPI: found 6 devices
>[    0.533277] Switched to clocksource acpi_pm
>[    0.533395] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
>[    0.533407] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
>[    0.533413] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
>[    0.533423] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
>[    0.533428] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
>[    0.533445] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.533450] pci 0000:00:1c.1: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    0.533455] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.533459] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    0.533464] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.533481] pci 0000:00:1c.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
>[    0.533491] pci 0000:00:1c.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
>[    0.533503] pci 0000:00:1c.1: BAR 8: no space for [mem size 0x00200000]
>[    0.533511] pci 0000:00:1c.1: BAR 8: failed to assign [mem size 0x00200000]
>[    0.533526] pci 0000:00:1c.1: BAR 9: no space for [mem size 0x00200000 64bit pref]
>[    0.533534] pci 0000:00:1c.1: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
>[    0.533545] pci 0000:00:1c.2: BAR 8: no space for [mem size 0x00200000]
>[    0.533553] pci 0000:00:1c.2: BAR 8: failed to assign [mem size 0x00200000]
>[    0.533567] pci 0000:00:1c.2: BAR 9: no space for [mem size 0x00200000 64bit pref]
>[    0.533576] pci 0000:00:1c.2: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
>[    0.533588] pci 0000:00:1c.2: BAR 8: no space for [mem size 0x00200000]
>[    0.533595] pci 0000:00:1c.2: BAR 8: failed to assign [mem size 0x00200000]
>[    0.533610] pci 0000:00:1c.2: BAR 9: no space for [mem size 0x00200000 64bit pref]
>[    0.533618] pci 0000:00:1c.2: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
>[    0.533630] pci 0000:00:1c.1: BAR 8: no space for [mem size 0x00200000]
>[    0.533637] pci 0000:00:1c.1: BAR 8: failed to assign [mem size 0x00200000]
>[    0.533652] pci 0000:00:1c.1: BAR 9: no space for [mem size 0x00200000 64bit pref]
>[    0.533660] pci 0000:00:1c.1: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
>[    0.533675] pci 0000:00:1c.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
>[    0.533684] pci 0000:00:1c.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
>[    0.533693] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.533700] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.533710] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x904fffff]
>[    0.533723] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.533755] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>[    0.533771] pci 0000:00:1c.2: PCI bridge to [bus 03]
>[    0.533778] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>[    0.533793] pci 0000:00:1c.3: PCI bridge to [bus 04]
>[    0.533800] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
>[    0.533809] pci 0000:00:1c.3:   bridge window [mem 0x90c00000-0x90dfffff]
>[    0.533818] pci 0000:00:1c.3:   bridge window [mem 0x90e00000-0x90ffffff 64bit pref]
>[    0.533831] pci_bus 0000:00: resource 4 [io  0x0000-0x006f]
>[    0.533835] pci_bus 0000:00: resource 5 [io  0x0078-0x0cf7]
>[    0.533839] pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
>[    0.533843] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
>[    0.533848] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
>[    0.533852] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
>[    0.533856] pci_bus 0000:00: resource 10 [mem 0x90c00000-0x90ffffff]
>[    0.533860] pci_bus 0000:00: resource 11 [mem 0x80000000-0x907ffffe]
>[    0.533865] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    0.533869] pci_bus 0000:01: resource 1 [mem 0x90400000-0x904fffff]
>[    0.533873] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
>[    0.533878] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
>[    0.533882] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
>[    0.533886] pci_bus 0000:04: resource 1 [mem 0x90c00000-0x90dfffff]
>[    0.533891] pci_bus 0000:04: resource 2 [mem 0x90e00000-0x90ffffff 64bit pref]
>[    0.533944] NET: Registered protocol family 2
>[    0.534274] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.534377] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
>[    0.534462] TCP: Hash tables configured (established 16384 bind 16384)
>[    0.534517] TCP: reno registered
>[    0.534531] UDP hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.534557] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.534664] NET: Registered protocol family 1
>[    0.534829] RPC: Registered named UNIX socket transport module.
>[    0.534838] RPC: Registered udp transport module.
>[    0.534843] RPC: Registered tcp transport module.
>[    0.534847] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.534885] pci 0000:00:02.0: Video device with shadowed ROM
>[    0.535204] PCI: CLS 64 bytes, default 64
>[    1.253804] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    1.253869] audit: initializing netlink subsys (disabled)
>[    1.253892] audit: type=2000 audit(1414380647.219:1): initialized
>[    1.254278] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.258192] VFS: Disk quotas dquot_6.5.2
>[    1.258286] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.259859] NFS: Registering the id_resolver key type
>[    1.259883] Key type id_resolver registered
>[    1.259889] Key type id_legacy registered
>[    1.259901] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    1.260292] fuse init (API version 7.23)
>[    1.260498] msgmni has been set to 3743
>[    1.261105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    1.261118] io scheduler noop registered
>[    1.261126] io scheduler deadline registered
>[    1.261197] io scheduler cfq registered (default)
>[    1.262166] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.262399] fan PNP0C0B:00: ACPI: Fan [FAN0] (off)
>[    1.264481] Monitor-Mwait will be used to enter C-1 state
>[    1.264491] Monitor-Mwait will be used to enter C-2 state
>[    1.264518] ACPI: acpi_idle registered with cpuidle
>[    1.266016] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.266025] ACPI: Thermal Zone [TZ01] (27 C)
>[    1.266126] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.286452] serial 00:02: ttyS0 at I/O 0x3f8 (irq = 3, base_baud = 115200) is a 16550A
>[    1.287256] hpet: number irqs doesn't agree with number of timers
>[    1.287385] Non-volatile memory driver v1.3
>[    1.287397] Linux agpgart interface v0.103
>[    1.290136] brd: module loaded
>[    1.290262] Loading iSCSI transport class v2.0-870.
>[    1.290555] iscsi: registered transport (tcp)
>[    1.290748] Adaptec aacraid driver 1.2-0[30300]-ms
>[    1.290812] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.290968] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k.
>[    1.291046] iscsi: registered transport (qla4xxx)
>[    1.291078] QLogic iSCSI HBA Driver
>[    1.291147] DC390: clustering now enabled by default. If you get problems load
>[    1.291154]        with "disable_clustering=1" and report to maintainers
>[    1.291216] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.291301] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.291331] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.291406] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.291452] osst :I: Tape driver with OnStream support version 0.99.4
>[    1.291452] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.291585] SCSI Media Changer driver v0.25 
>[    1.291645] ahci 0000:00:13.0: version 3.0
>[    1.291852] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
>[    1.291889] ahci 0000:00:13.0: irq 87 for MSI/MSI-X
>[    1.302822] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
>[    1.302837] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso 
>[    1.303494] scsi host0: ahci
>[    1.303733] scsi host1: ahci
>[    1.303863] ata1: SATA max UDMA/133 abar m2048@0x90717000 port 0x90717100 irq 87
>[    1.303871] ata2: DUMMY
>[    1.305596] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.710.51-0 (2014/02/10)
>[    1.305820] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.305827] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.305867] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.305873] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.305916] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.305922] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    1.306187] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.306236] e1000e 0000:01:00.0: irq 88 for MSI/MSI-X
>[    1.481318] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:15:17:0d:5f:a4
>[    1.481331] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.481425] e1000e 0000:01:00.0 eth0: MAC: 1, PHY: 4, PBA No: D28777-004
>[    1.481478] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
>[    1.481485] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.481569] usbcore: registered new interface driver catc
>[    1.481606] usbcore: registered new interface driver kaweth
>[    1.481616] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.481645] usbcore: registered new interface driver pegasus
>[    1.481677] usbcore: registered new interface driver rtl8150
>[    1.481714] usbcore: registered new interface driver asix
>[    1.481748] usbcore: registered new interface driver ax88179_178a
>[    1.481784] usbcore: registered new interface driver cdc_ether
>[    1.481815] usbcore: registered new interface driver dm9601
>[    1.481846] usbcore: registered new interface driver gl620a
>[    1.481878] usbcore: registered new interface driver net1080
>[    1.481908] usbcore: registered new interface driver plusb
>[    1.481944] usbcore: registered new interface driver rndis_host
>[    1.481976] usbcore: registered new interface driver cdc_subset
>[    1.482008] usbcore: registered new interface driver zaurus
>[    1.482040] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.482091] usbcore: registered new interface driver cdc_ncm
>[    1.482519] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.482618] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.483034] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.483059] xhci_hcd 0000:00:14.0: irq 89 for MSI/MSI-X
>[    1.483197] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.483205] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.483213] usb usb1: Product: xHCI Host Controller
>[    1.483220] usb usb1: Manufacturer: Linux 3.18.0-rc1_drm-intel-nightly_88a443_20141027+ xhci-hcd
>[    1.483228] usb usb1: SerialNumber: 0000:00:14.0
>[    1.483543] hub 1-0:1.0: USB hub found
>[    1.483563] hub 1-0:1.0: 6 ports detected
>[    1.484334] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.484437] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.484512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.484521] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.484528] usb usb2: Product: xHCI Host Controller
>[    1.484535] usb usb2: Manufacturer: Linux 3.18.0-rc1_drm-intel-nightly_88a443_20141027+ xhci-hcd
>[    1.484543] usb usb2: SerialNumber: 0000:00:14.0
>[    1.484777] hub 2-0:1.0: USB hub found
>[    1.484796] hub 2-0:1.0: 1 port detected
>[    1.485036] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.485045] ehci-pci: EHCI PCI platform driver
>[    1.485120] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.485159] ohci-pci: OHCI PCI platform driver
>[    1.485194] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.485288] usbcore: registered new interface driver usb-storage
>[    1.485362] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.485714] i8042: Warning: Keylock active
>[    1.486644] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.486657] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.486866] mousedev: PS/2 mouse device common for all mice
>[    1.487051] rtc_cmos 00:00: RTC can wake from S4
>[    1.487293] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
>[    1.487327] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
>[    1.487353] i2c /dev entries driver
>[    1.487414] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.487897] usbcore: registered new interface driver usbhid
>[    1.487903] usbhid: USB HID core driver
>[    1.488006] TCP: cubic registered
>[    1.488015] Initializing XFRM netlink socket
>[    1.488028] NET: Registered protocol family 17
>[    1.488079] Key type dns_resolver registered
>[    1.488771] registered taskstats version 1
>[    1.490006] Btrfs loaded
>[    1.490548]   Magic number: 2:846:513
>[    1.490754] PM: Hibernation image not present or could not be loaded.
>[    1.490794] Warning: unable to open an initial console.
>[    1.613865] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.615875] ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133
>[    1.615888] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.625929] ata1.00: configured for UDMA/133
>[    1.626468] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5
>[    1.627037] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.627063] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.627239] sd 0:0:0:0: [sda] Write Protect is off
>[    1.627248] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.627308] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.629317]  sda: sda1 sda2 sda3
>[    1.630169] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.643553] Freeing unused kernel memory: 23368K (ffffffff81c59000 - ffffffff8332b000)
>[    1.709627] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
>[    1.720890] dracut: dracut-018-35.git20120510.fc17
>[    1.789911] udevd[1234]: starting version 182
>[    1.832146] [drm] Initialized drm 1.1.0 20060810
>[    1.833722] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    1.837294] ACPI: Lid Switch [LID0]
>[    1.837459] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    1.837538] ACPI: Power Button [PWRB]
>[    1.837659] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    1.837732] ACPI: Sleep Button [SLPB]
>[    1.837880] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    1.837917] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    1.837994] ACPI: Power Button [PWRF]
>[    1.856700] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0f31 rev=0x00 flags=is_mobile,need_gfx_hws,is_valleyview,has_hotplug,
>[    1.856734] [drm:intel_detect_pch] No PCH found.
>[    1.856946] [drm] Memory usable by graphics device = 2048M
>[    1.856956] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.856959] [drm:i915_gem_gtt_init] GTT stolen size = 64M
>[    1.856962] [drm:sanitize_enable_ppgtt] disabling PPGTT on pre-B3 step VLV
>[    1.856965] [drm:i915_gem_gtt_init] ppgtt mode: 0
>[    1.856967] [drm] Replacing VGA console driver
>[    1.865120] [drm:intel_opregion_setup] graphic opregion physical addr: 0x794d3018
>[    1.865144] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.865147] [drm:intel_opregion_setup] ASLE supported
>[    1.865299] i915 0000:00:02.0: irq 90 for MSI/MSI-X
>[    1.865313] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.865323] [drm] Driver supports precise vblank timestamp query.
>[    1.865330] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz
>[    1.865335] [drm:validate_vbt] Using VBT from OpRegion:  $VBT VALLEYVIEW    
>[    1.865340] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.865343] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.865347] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.865352] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.865357] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    1.865361] [drm:parse_lfp_panel_data] VBT initial LVDS value 0
>[    1.865365] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    1.865369] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.865373] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.865390] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.865403] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at 7b000000
>[    1.872940] [drm:intel_display_power_get] enabling always-on
>[    1.872946] [drm:intel_display_power_get] enabling display
>[    1.878941] [drm:intel_display_power_get] enabling dpio-tx-b-01
>[    1.884937] [drm:intel_display_power_get] enabling dpio-tx-b-23
>[    1.888967] [drm:intel_display_power_get] enabling dpio-tx-c-01
>[    1.894966] [drm:intel_display_power_get] enabling dpio-tx-c-23
>[    1.901118] [drm:intel_display_power_get] enabling dpio-common
>[    1.943261] [drm:intel_modeset_init] 2 display pipes available.
>[    1.943285] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.943710] [drm:intel_crt_reset] crt adpa set to 0xf40000
>[    1.943806] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.943873] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.944232] [drm:intel_dp_init_connector] Adding eDP connector on port C
>[    1.965102] atkbd serio0: Failed to enable keyboard on isa0060/serio0
>[    1.965230] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.968117] [drm:vlv_initial_power_sequencer_setup] initial power sequencer for port C: pipe A
>[    1.968127] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000
>[    1.968131] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.968135] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
>[    1.968138] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.968144] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05
>[    1.992151] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-eDP-1
>[    2.008022] usb 1-1: New USB device found, idVendor=0461, idProduct=0010
>[    2.008033] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.008041] usb 1-1: Product: USB Keyboard
>[    2.008047] usb 1-1: Manufacturer: NOVATEK
>[    2.008294] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.008310] usb 1-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.011329] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0461:0010.0001/input/input6
>[    2.011568] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-1/input0
>[    2.012219] [drm:intel_edp_panel_vdd_sanitize] VDD left on by BIOS, adjusting state tracking
>[    2.016499] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0461:0010.0002/input/input7
>[    2.016654] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-1/input1
>[    2.135086] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
>[    2.169664] usb 1-2: new high-speed USB device number 3 using xhci_hcd
>[    2.177160] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
>[    2.221248] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
>[    2.256887] tsc: Refined TSC clocksource calibration: 1999.999 MHz
>[    2.265334] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
>[    2.330946] [drm] failed to retrieve link info, disabling eDP
>[    2.350755] usb 1-2: New USB device found, idVendor=0b95, idProduct=772b
>[    2.350765] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.350773] usb 1-2: Product: AX88772B
>[    2.350778] usb 1-2: Manufacturer: ASIX Elec. Corp.
>[    2.350784] usb 1-2: SerialNumber: 000310
>[    2.350846] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
>[    2.350853] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
>[    2.397160] [drm:intel_dsi_init] 
>[    2.398942] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled
>[    2.398948] [drm:intel_modeset_readout_hw_state] [CRTC:13] hw state readout: disabled
>[    2.398953] [drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
>[    2.398958] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: enabled, pipe A
>[    2.398963] [drm:intel_modeset_readout_hw_state] [ENCODER:23:TMDS-23] hw state readout: disabled, pipe A
>[    2.398967] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[    2.398971] [drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: disabled
>[    2.398976] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-1] hw state readout: enabled
>[    2.398980] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:DP-1] hw state readout: disabled
>[    2.398984] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled
>[    2.398991] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A
>[    2.398994] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    2.398997] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    2.399001] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.399005] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.399009] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.399011] [drm:intel_dump_pipe_config] requested mode:
>[    2.399017] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0
>[    2.399019] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.399024] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
>[    2.399029] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x0 flags: 0x5
>[    2.399032] [drm:intel_dump_pipe_config] port clock: 148500
>[    2.399035] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    2.399038] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.399041] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.399044] [drm:intel_dump_pipe_config] ips: 0
>[    2.399047] [drm:intel_dump_pipe_config] double wide: 0
>[    2.399052] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    2.399060] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    2.399063] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    2.399069] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    2.399073] [drm:intel_dump_pipe_config] [CRTC:13][setup_hw_state] config for pipe B
>[    2.399076] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    2.399079] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    2.399083] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.399086] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.399090] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.399092] [drm:intel_dump_pipe_config] requested mode:
>[    2.399097] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.399100] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.399104] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.399108] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.399111] [drm:intel_dump_pipe_config] port clock: 0
>[    2.399114] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    2.399118] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.399121] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.399124] [drm:intel_dump_pipe_config] ips: 0
>[    2.399126] [drm:intel_dump_pipe_config] double wide: 0
>[    2.399132] [drm:intel_connector_check_state] [CONNECTOR:19:HDMI-A-1]
>[    2.399137] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[    2.399141] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    2.399145] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[    2.399148] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    2.399152] [drm:check_crtc_state] [CRTC:8]
>[    2.400965] [drm:check_crtc_state] [CRTC:13]
>[    2.400978] [drm:i9xx_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    2.400982] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    2.400992] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    2.401000] [drm:intel_alloc_plane_obj] plane fb obj ffff880002ff8000
>[    2.401007] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    2.401010] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, 7ffff000]
>[    2.403445] [drm:i915_gem_context_init] HW context support initialized
>[    2.403463] [drm:init_status_page] render ring hws offset: 0x007ec000
>[    2.403467] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    2.403472] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=131072
>[    2.404998] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0080f000
>[    2.405013] [drm:init_status_page] bsd ring hws offset: 0x00810000
>[    2.405017] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    2.405021] [drm:i915_pages_create_for_stolen] offset=0x809000, size=131072
>[    2.405073] [drm:init_status_page] blitter ring hws offset: 0x00833000
>[    2.405076] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    2.405080] [drm:i915_pages_create_for_stolen] offset=0x829000, size=131072
>[    2.405146] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000
>[    2.405151] [drm:i915_pages_create_for_stolen] offset=0x3efa000, size=24576
>[    2.407121] [drm:valleyview_init_gt_powersave] DDR speed: 1066 MHz
>[    2.409120] [drm:valleyview_init_gt_powersave] max GPU freq: 755 MHz (217)
>[    2.413126] [drm:valleyview_init_gt_powersave] RPe GPU freq: 400 MHz (201)
>[    2.415128] [drm:valleyview_init_gt_powersave] RP1(Guar Freq) GPU freq: 311 MHz (197)
>[    2.417134] [drm:valleyview_init_gt_powersave] min GPU freq: 178 MHz (191)
>[    2.421141] [drm:vlv_update_cdclk] Current CD clock rate: 320000 kHz
>[    2.421246] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[    2.421251] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[    2.421749] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>[    2.427138] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
>[    2.427338] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20140828/psargs-359)
>[    2.427354] ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP01.PEGP.DD02._BCL] (Node ffff880076454258), AE_NOT_FOUND (20140828/psparse-536)
>[    2.427492] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:00/input/input9
>[    2.429011] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[    2.429166] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.429324] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
>[    2.429463] [drm] Initialized i915 1.6.0 20141024 for 0000:00:02.0 on minor 0
>[    2.435060] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, result 0
>[    2.435066] [drm:intel_crt_detect] CRT not detected via hotplug
>[    2.435234] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    2.435239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    2.435242] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.435246] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    2.435530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    2.435534] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    2.435537] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    2.443048] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] disconnected
>[    2.443054] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1]
>[    2.443057] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
>[    2.515315] [drm:drm_detect_monitor_audio] Monitor has basic audio support
>[    2.515472] [drm:drm_edid_to_eld] ELD monitor S23C570
>[    2.515477] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[    2.515480] [drm:drm_edid_to_eld] ELD size 8, SAD count 1
>[    2.515513] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] probed modes :
>[    2.515520] [drm:drm_mode_debug_printmodeline] Modeline 29:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    2.515525] [drm:drm_mode_debug_printmodeline] Modeline 61:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    2.515530] [drm:drm_mode_debug_printmodeline] Modeline 57:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[    2.515535] [drm:drm_mode_debug_printmodeline] Modeline 39:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[    2.515541] [drm:drm_mode_debug_printmodeline] Modeline 38:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6
>[    2.515546] [drm:drm_mode_debug_printmodeline] Modeline 47:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    2.515551] [drm:drm_mode_debug_printmodeline] Modeline 36:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    2.515556] [drm:drm_mode_debug_printmodeline] Modeline 37:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[    2.515561] [drm:drm_mode_debug_printmodeline] Modeline 35:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
>[    2.515567] [drm:drm_mode_debug_printmodeline] Modeline 34:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    2.515572] [drm:drm_mode_debug_printmodeline] Modeline 30:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    2.515577] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    2.515582] [drm:drm_mode_debug_printmodeline] Modeline 31:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[    2.515588] [drm:drm_mode_debug_printmodeline] Modeline 48:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    2.515593] [drm:drm_mode_debug_printmodeline] Modeline 49:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    2.515598] [drm:drm_mode_debug_printmodeline] Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    2.515603] [drm:drm_mode_debug_printmodeline] Modeline 51:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[    2.515608] [drm:drm_mode_debug_printmodeline] Modeline 52:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    2.515614] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[    2.515619] [drm:drm_mode_debug_printmodeline] Modeline 40:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    2.515624] [drm:drm_mode_debug_printmodeline] Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    2.515629] [drm:drm_mode_debug_printmodeline] Modeline 32:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[    2.515634] [drm:drm_mode_debug_printmodeline] Modeline 63:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    2.515639] [drm:drm_mode_debug_printmodeline] Modeline 33:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    2.515645] [drm:drm_mode_debug_printmodeline] Modeline 42:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    2.515650] [drm:drm_mode_debug_printmodeline] Modeline 43:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[    2.515655] [drm:drm_mode_debug_printmodeline] Modeline 44:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[    2.515660] [drm:drm_mode_debug_printmodeline] Modeline 45:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    2.515665] [drm:drm_mode_debug_printmodeline] Modeline 64:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    2.515670] [drm:drm_mode_debug_printmodeline] Modeline 46:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    2.515674] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1]
>[    2.515677] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
>[    2.565931] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
>[    2.610020] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
>[    2.654105] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
>[    2.657690] asix 1-2:1.0 eth1: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:73:82
>[    2.698194] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
>[    2.739793] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1] disconnected
>[    2.739801] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[    2.739805] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[    2.763955] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    2.763961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.787838] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[    2.787843] [drm:drm_setup_crtcs] 
>[    2.787848] [drm:drm_enable_connectors] connector 16 enabled? no
>[    2.787852] [drm:drm_enable_connectors] connector 19 enabled? yes
>[    2.787855] [drm:drm_enable_connectors] connector 24 enabled? no
>[    2.787858] [drm:drm_enable_connectors] connector 26 enabled? no
>[    2.787862] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    2.787865] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-1
>[    2.787868] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-1
>[    2.787873] [drm:intel_fb_initial_config] connector HDMI-A-1 on pipe A [CRTC:8]: 1920x1080
>[    2.787876] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    2.787879] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    2.787882] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 8
>[    2.787888] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    2.787892] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000
>[    2.787904] [drm:i915_pages_create_for_stolen] offset=0x849000, size=8294400
>[    2.791963] [drm:intelfb_create] allocated 1920x1080 fb: 0x00856000, bo ffff880002d96000
>[    2.792213] fbcon: inteldrmfb (fb0) is primary device
>[    2.792344] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[    2.792347] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    2.792350] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.792354] [drm:drm_mode_debug_printmodeline] Modeline 54:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    2.792356] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1
>[    2.792359] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    2.792362] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    2.792365] [drm:connected_sink_compute_bpp] [CONNECTOR:19:HDMI-A-1] checking for sink bpp constrains
>[    2.792370] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
>[    2.792372] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
>[    2.792374] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[    2.792376] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[    2.792377] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    2.792378] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    2.792381] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.792383] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.792385] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.792386] [drm:intel_dump_pipe_config] requested mode:
>[    2.792389] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    2.792390] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.792394] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    2.792397] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
>[    2.792398] [drm:intel_dump_pipe_config] port clock: 148500
>[    2.792399] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    2.792401] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.792403] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.792404] [drm:intel_dump_pipe_config] ips: 0
>[    2.792405] [drm:intel_dump_pipe_config] double wide: 0
>[    2.793735] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[    2.811774] usb 1-6: new high-speed USB device number 4 using xhci_hcd
>[    2.825920] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[    2.825923] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[    2.845953] [drm:vlv_update_cdclk] Current CD clock rate: 266667 kHz
>[    2.900058] [drm:intel_display_power_put] disabling always-on
>[    2.922107] [drm:intel_hdmi_prepare] Enabling HDMI audio on pipe A
>[    2.922110] [drm:intel_write_eld] ELD on [CONNECTOR:19:HDMI-A-1], [ENCODER:18:TMDS-18]
>[    2.922112] [drm:ironlake_write_eld] ELD on pipe A
>[    2.922113] [drm:ironlake_write_eld] ELD on port B
>[    2.922116] [drm:audio_config_hdmi_pixel_clock] Configuring HDMI audio for pixel clock 148500 (0x00090000)
>[    2.962226] [drm:g4x_check_srwm] SR watermark: display plane 114, cursor 2
>[    2.962228] [drm:g4x_check_srwm] SR watermark: display plane 225, cursor 2
>[    2.962231] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=64, cursor=2, B: plane=2, cursor=2, SR: plane=114, cursor=2
>[    2.962234] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
>[    2.962245] [drm:i9xx_update_primary_plane] Writing base 00856000 00000000 0 0 7680
>[    2.962253] [drm:intel_connector_check_state] [CONNECTOR:19:HDMI-A-1]
>[    2.962257] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[    2.962259] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[    2.962261] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[    2.962263] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[    2.962265] [drm:check_crtc_state] [CRTC:8]
>[    2.964186] [drm:check_crtc_state] [CRTC:13]
>[    2.964212] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
>[    2.964215] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[    2.964217] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    2.964227] Console: switching to colour frame buffer device 240x67
>[    2.964240] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[    2.964243] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    2.964245] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    2.976330] usb 1-6: New USB device found, idVendor=0424, idProduct=2640
>[    2.976333] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.976960] hub 1-6:1.0: USB hub found
>[    2.977036] hub 1-6:1.0: 3 ports detected
>[    2.980480] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.980556] i915 0000:00:02.0: registered panic notifier
>[    2.989644] dracut: Starting plymouth daemon
>[    3.004769] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[    3.004775] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.004778] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    3.034237] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[    3.034243] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.034246] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    3.210167] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    3.210263] EXT4-fs (sda2): write access will be enabled during recovery
>[    3.253867] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    3.254023] usb 1-6.1: new high-speed USB device number 5 using xhci_hcd
>[    3.254136] ACPI: AC Adapter [ADP1] (on-line)
>[    3.269009] Switched to clocksource tsc
>[    3.270851] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    3.270988] ACPI: Battery Slot [BAT0] (battery present)
>[    3.271115] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    3.271243] ACPI: Battery Slot [BAT1] (battery absent)
>[    3.306845] snd_hda_intel 0000:00:1b.0: irq 91 for MSI/MSI-X
>[    3.320128] ACPI Warning: SystemIO range 0x0000000000002000-0x000000000000201f conflicts with OpRegion 0x0000000000002000-0x000000000000200f (\_SB_.PCI0.SBUS.SMBI) (20140828/utaddress-258)
>[    3.320351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.325227] input: PC Speaker as /devices/platform/pcspkr/input/input11
>[    3.345509] usb 1-6.1: New USB device found, idVendor=0424, idProduct=4040
>[    3.345605] usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.345695] usb 1-6.1: Product: Ultra Fast Media Reader
>[    3.345774] usb 1-6.1: Manufacturer: Generic
>[    3.345830] usb 1-6.1: SerialNumber: 000000264001
>[    3.347024] usb-storage 1-6.1:1.0: USB Mass Storage device detected
>[    3.371216] scsi host2: usb-storage 1-6.1:1.0
>[    3.383536] EXT4-fs (sda2): recovery complete
>[    3.384151] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    3.395704] iTCO_vendor_support: vendor-support=0
>[    3.396007] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    3.396141] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
>[    3.396423] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    3.406715] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[    3.406828] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    3.406937] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    3.407015] sound hdaudioC0D0:    mono: mono_out=0x0
>[    3.407076] sound hdaudioC0D0:    inputs:
>[    3.407129] sound hdaudioC0D0:      Front Mic=0x19
>[    3.407190] sound hdaudioC0D0:      Rear Mic=0x18
>[    3.411415] sound hdaudioC0D0:      Line=0x1a
>[    3.411520] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[    3.411526] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    3.411529] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    3.494284] dracut: Checking ext4: /dev/sda2
>[    3.498761] dracut: issuing e2fsck -a  /dev/sda2
>[    3.517862] dracut: /dev/sda2: clean, 841551/13598720 files, 26976375/54372608 blocks
>[    3.523041] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro
>[    3.534823] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    3.547927] dracut: Mounted root filesystem /dev/sda2
>[    3.576932] device-mapper: uevent: version 1.0.3
>[    3.581324] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
>[    3.661441] dracut: Switching root
>[    3.729207] random: init urandom read with 69 bits of entropy available
>[    3.741565] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[    3.743550] [drm:valleyview_enable_rps] GPLL enabled? yes
>[    3.743556] [drm:valleyview_enable_rps] GPU status: 0x0000c590
>[    3.743559] [drm:valleyview_enable_rps] current GPU freq: 311 MHz (197)
>[    3.743562] [drm:valleyview_enable_rps] setting GPU freq to 400 MHz (201)
>[    3.743566] [drm:valleyview_set_rps] GPU freq request from 311 MHz (197) to 400 MHz (201)
>[    3.797823] init: ureadahead main process (2396) terminated with status 5
>[    4.129703] systemd-udevd[2505]: starting version 204
>[    4.376416] scsi 2:0:0:0: Direct-Access     Generic  Ultra HS-COMBO   2.01 PQ: 0 ANSI: 0
>[    4.377379] sd 2:0:0:0: Attached scsi generic sg1 type 0
>[    4.379943] sd 2:0:0:0: [sdb] Attached SCSI removable disk
>[    4.450513] e1000e 0000:01:00.0 eth2: renamed from eth0
>[    4.548218] systemd-udevd[3003]: could not open moddep file '/lib/modules/3.18.0-rc1_drm-intel-nightly_88a443_20141027+/modules.dep.bin'
>[    4.624948] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[    4.624954] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    4.624958] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    4.640989] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[    4.640995] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    4.640998] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    4.681168] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[    4.681174] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    4.681178] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    4.819389] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[    4.819396] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    4.819420] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    4.863137] Adding 16440316k swap on /dev/sda3.  Priority:-1 extents:1 across:16440316k SS
>[    4.900135] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    4.906266] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    4.970734] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    5.095439] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    5.101331] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    5.163777] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    5.169842] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    5.359082] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    5.372974] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    5.770571] init: idmapd-mounting (/lib/modules/3.18.0-rc1_drm-intel-nightly_f2bcbc_20141021+) main process (3138) killed by TERM signal
>[    5.815671] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory
>[    5.984940] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
>[    6.211490] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
>[    6.233067] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
>[    6.281925] init: failsafe main process (3262) killed by TERM signal
>[    6.517258] init: statd-mounting (/lib/modules/3.18.0-rc1_drm-intel-nightly_f2bcbc_20141021+) main process (3139) killed by TERM signal
>[    6.786759] random: nonblocking pool is initialized
>[    6.912135] init: avahi-cups-reload main process (3497) terminated with status 1
>[    7.134015] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
>[    7.769120] asix 1-2:1.0 eth1: link down
>[    7.943279] e1000e 0000:01:00.0: irq 88 for MSI/MSI-X
>[    8.011195] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[    8.011201] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[    8.011204] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[    8.031723] init: lightdm main process (3599) terminated with status 1
>[    8.044020] e1000e 0000:01:00.0: irq 88 for MSI/MSI-X
>[    8.080145] init: plymouth-ready (startup) main process (2393) terminated with status 1
>[    8.177748] init: plymouth-stop pre-start process (3711) terminated with status 1
>[    9.565562] asix 1-2:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
>[   12.674798] init: failsafe-x main process (3978) terminated with status 1
>[  602.260216] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  602.286169] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  602.286172] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[  602.294175] [drm:intel_display_power_put] disabling dpio-common
>[  602.306197] [drm:intel_display_power_put] disabling dpio-tx-c-23
>[  602.318220] [drm:intel_display_power_put] disabling dpio-tx-c-01
>[  602.330243] [drm:intel_display_power_put] disabling dpio-tx-b-23
>[  602.342270] [drm:intel_display_power_put] disabling dpio-tx-b-01
>[  602.354290] [drm:intel_display_power_put] disabling display
>[  602.366320] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[  602.366322] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[  602.366324] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[  602.366326] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[  602.366327] [drm:check_crtc_state] [CRTC:8]
>[  602.366329] [drm:check_crtc_state] [CRTC:13]
>[ 5896.897523] gem_userptr_blits: executing
>[ 5896.897691] [drm:i915_gem_open] 
>[ 5896.898218] [drm:i915_gem_open] 
>[ 5896.899387] gem_userptr_blits: starting subtest dmabuf-sync
>[ 5896.899435] [drm:i915_gem_open] 
>[ 5896.900827] [drm:i915_gem_open] 
>[ 5896.907829] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[ 5896.907839] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
>[ 5896.907844] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[ 5896.907850] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[ 5896.907855] [drm:connected_sink_compute_bpp] [CONNECTOR:19:HDMI-A-1] checking for sink bpp constrains
>[ 5896.907862] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
>[ 5896.907865] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
>[ 5896.907870] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
>[ 5896.907873] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[ 5896.907876] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[ 5896.907879] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[ 5896.907883] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[ 5896.907887] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[ 5896.907891] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[ 5896.907894] [drm:intel_dump_pipe_config] requested mode:
>[ 5896.907899] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[ 5896.907902] [drm:intel_dump_pipe_config] adjusted mode:
>[ 5896.907907] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[ 5896.907912] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
>[ 5896.907915] [drm:intel_dump_pipe_config] port clock: 148500
>[ 5896.907918] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[ 5896.907921] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[ 5896.907925] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[ 5896.907928] [drm:intel_dump_pipe_config] ips: 0
>[ 5896.907931] [drm:intel_dump_pipe_config] double wide: 0
>[ 5896.911398] [drm:intel_display_power_get] enabling display
>[ 5896.919416] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[ 5896.931435] [drm:intel_display_power_get] enabling dpio-tx-b-01
>[ 5896.943595] [drm:intel_display_power_get] enabling dpio-tx-b-23
>[ 5896.955617] [drm:intel_display_power_get] enabling dpio-tx-c-01
>[ 5896.967641] [drm:intel_display_power_get] enabling dpio-tx-c-23
>[ 5896.979664] [drm:intel_display_power_get] enabling dpio-common
>[ 5897.013735] [drm:intel_hdmi_prepare] Enabling HDMI audio on pipe A
>[ 5897.013742] [drm:intel_write_eld] ELD on [CONNECTOR:19:HDMI-A-1], [ENCODER:18:TMDS-18]
>[ 5897.013746] [drm:ironlake_write_eld] ELD on pipe A
>[ 5897.013749] [drm:ironlake_write_eld] ELD on port B
>[ 5897.013753] [drm:audio_config_hdmi_pixel_clock] Configuring HDMI audio for pixel clock 148500 (0x00090000)
>[ 5897.053855] [drm:g4x_check_srwm] SR watermark: display plane 114, cursor 2
>[ 5897.053861] [drm:g4x_check_srwm] SR watermark: display plane 225, cursor 2
>[ 5897.053865] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=64, cursor=2, B: plane=2, cursor=2, SR: plane=114, cursor=2
>[ 5897.053870] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
>[ 5897.053884] [drm:i9xx_update_primary_plane] Writing base 00856000 00000000 0 0 7680
>[ 5897.053895] [drm:intel_connector_check_state] [CONNECTOR:19:HDMI-A-1]
>[ 5897.053901] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[ 5897.053905] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[ 5897.053909] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[ 5897.053913] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[ 5897.053916] [drm:check_crtc_state] [CRTC:8]
>[ 5897.055682] [drm:check_crtc_state] [CRTC:13]
>[ 5897.055690] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
>[ 5897.055696] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[ 5897.055700] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[ 5904.855051] gem_userptr_blits: executing
>[ 5904.855226] [drm:i915_gem_open] 
>[ 5904.855704] [drm:i915_gem_open] 
>[ 5904.855906] gem_userptr_blits: starting subtest dmabuf-unsync
>[ 5904.855955] [drm:i915_gem_open] 
>[ 5904.857369] [drm:i915_gem_open] 
>[ 5904.861527] [drm:intel_crtc_set_config] [CRTC:8] [FB:55] #connectors=1 (x y) (0 0)
>[ 5904.861538] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[ 5904.861543] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]
>[ 5904.861548] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
>[ 5904.861552] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[ 5904.861556] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:HDMI-A-1] to [CRTC:8]

Actions: View

Attachments on bug 85497: 108489

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.