Attachment 113046 Details for Bug 88919 – dmesg - kernel 3.14.31

dmesg - kernel 3.14.31

dmesg-3.14.31.log (text/plain), 122.36 KB, created by Eugene A. Shatokhin on 2015-02-02 09:13:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Eugene A. Shatokhin

Created: 2015-02-02 09:13:28 UTC

Size: 122.36 KB

patch

obsolete

>[    5.043723] ACPI: Sleep Button [SLPB]
>[    5.043808] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input10
>[    5.043866] ACPI: Lid Switch [LID]
>[    5.043929] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
>[    5.043932] ACPI: Power Button [PWRF]
>[    5.051533] wmi: Mapper loaded
>[    5.054607] [drm] Initialized drm 1.1.0 20060810
>[    5.059633] ACPI: bus type USB registered
>[    5.061071] usbcore: registered new interface driver usbfs
>[    5.062360] usbcore: registered new interface driver hub
>[    5.065050] usbcore: registered new device driver usb
>[    5.065266] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0a16 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    5.065267] [drm:intel_detect_pch], Found LynxPoint LP PCH
>[    5.070598] [drm] Memory usable by graphics device = 2048M
>[    5.072021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    5.072706] [drm:i915_gem_gtt_init], GMADR size = 256M
>[    5.072707] [drm:i915_gem_gtt_init], GTT stolen size = 32M
>[    5.072710] checking generic (c0000000 300000) vs hw (c0000000 10000000)
>[    5.072711] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver
>[    5.078575] Console: switching to colour dummy device 80x25
>[    5.079142] ehci-pci: EHCI PCI platform driver
>[    5.079965] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbbf74018
>[    5.079980] [drm:intel_opregion_setup], Public ACPI methods supported
>[    5.079984] [drm:intel_opregion_setup], SWSCI supported
>[    5.097407] [drm:swsci_setup], SWSCI BIOS requested (00200081) SBCB callbacks that are not supported (00200101)
>[    5.097421] [drm:swsci_setup], SWSCI GBDA callbacks 000000b3, SBCB callbacks 00200081
>[    5.097428] [drm:intel_opregion_setup], ASLE supported
>[    5.097547] i915 0000:00:02.0: irq 60 for MSI/MSI-X
>[    5.097559] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    5.097562] [drm] Driver supports precise vblank timestamp query.
>[    5.097566] [drm:init_vbt_defaults], Set default to SSC at 120000 kHz
>[    5.097570] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL        d
>[    5.097575] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    5.097581] [drm:parse_general_definitions], crt_ddc_bus_pin: 0
>[    5.097587] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[    5.097593] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 76300 1366 1414 1446 1578 768 770 775 806 0x8 0xa
>[    5.097598] [drm:parse_lfp_panel_data], VBT initial LVDS value 200300
>[    5.097602] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    5.097607] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[    5.097614] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    5.097622] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[    5.097630] [drm:parse_mipi], No MIPI BDB found
>[    5.097635] [drm:parse_ddi_port], Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    5.097640] [drm:parse_ddi_port], VBT HDMI level shift for port A: 0
>[    5.097643] [drm:parse_ddi_port], Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    5.097647] [drm:parse_ddi_port], VBT HDMI level shift for port B: 6
>[    5.097650] [drm:parse_ddi_port], Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    5.097654] [drm:parse_ddi_port], VBT HDMI level shift for port C: 0
>[    5.097694] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[    5.097704] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at bd200000
>[    5.097744] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    5.097757] [drm:intel_print_wm_latency], Primary WM0 latency 20 (2.0 usec)
>[    5.097760] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec)
>[    5.097764] [drm:intel_print_wm_latency], Primary WM2 latency 36 (18.0 usec)
>[    5.097767] [drm:intel_print_wm_latency], Primary WM3 latency 90 (45.0 usec)
>[    5.097771] [drm:intel_print_wm_latency], Primary WM4 latency 160 (80.0 usec)
>[    5.097775] [drm:intel_print_wm_latency], Sprite WM0 latency 20 (2.0 usec)
>[    5.097778] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec)
>[    5.097782] [drm:intel_print_wm_latency], Sprite WM2 latency 36 (18.0 usec)
>[    5.097785] [drm:intel_print_wm_latency], Sprite WM3 latency 90 (45.0 usec)
>[    5.097788] [drm:intel_print_wm_latency], Sprite WM4 latency 160 (80.0 usec)
>[    5.097792] [drm:intel_print_wm_latency], Cursor WM0 latency 20 (2.0 usec)
>[    5.097795] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec)
>[    5.097799] [drm:intel_print_wm_latency], Cursor WM2 latency 36 (18.0 usec)
>[    5.097802] [drm:intel_print_wm_latency], Cursor WM3 latency 90 (45.0 usec)
>[    5.097805] [drm:intel_print_wm_latency], Cursor WM4 latency 160 (80.0 usec)
>[    5.097810] [drm:intel_modeset_init], 3 display pipes available.
>[    5.097826] [drm:intel_ddi_pll_init], CDCLK running at 450000KHz
>[    5.098135] [drm:intel_dp_init_connector], Adding eDP connector on port A
>[    5.098186] [drm:intel_dp_i2c_init], i2c_init DPDDC-A
>[    5.098193] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[    5.098205] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    5.098355] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    5.098629] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    5.098639] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[    5.098648] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    5.098719] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    5.098725] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    5.098730] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
>[    5.098734] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
>[    5.098739] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[    5.098747] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    5.099018] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 01 00 00 01 00 02 00 00 00 00 0b 00
>[    5.099189] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d0000a, PP_OFF 0x1f407d0, PP_DIV 0x4af06
>[    5.099876] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    5.119035] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    5.119046] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    5.119079] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 937/937, sysfs interface registered
>[    5.119090] [drm:intel_dp_init_connector], Adding DP connector on port B
>[    5.119125] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[    5.121556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145000c
>[    5.121563] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    5.123989] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145000c
>[    5.123994] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    5.124067] [drm:intel_dp_init_connector], Adding DP connector on port C
>[    5.124097] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[    5.126528] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145000c
>[    5.126534] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    5.128963] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145000c
>[    5.128969] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    5.147397] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
>[    5.149359] [drm:init_status_page], render ring hws offset: 0x00000000
>[    5.154081] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
>[    5.154092] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[    5.154150] [drm:init_status_page], blitter ring hws offset: 0x00043000
>[    5.154200] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
>[    5.154282] [drm:create_default_context], Default HW context loaded
>[    5.154285] [drm:i915_gem_context_init], HW context support initialized
>[    5.154363] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
>[    5.154367] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[    5.154370] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[    5.154373] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port A using clock 0x20000000
>[    5.154379] [drm:intel_modeset_readout_hw_state], [ENCODER:9:TMDS-9] hw state readout: enabled, pipe A
>[    5.154382] [drm:intel_modeset_readout_hw_state], [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[    5.154386] [drm:intel_modeset_readout_hw_state], [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A
>[    5.154390] [drm:intel_modeset_readout_hw_state], [CONNECTOR:10:eDP-1] hw state readout: enabled
>[    5.154393] [drm:intel_modeset_readout_hw_state], [CONNECTOR:19:DP-1] hw state readout: disabled
>[    5.154396] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:HDMI-A-1] hw state readout: disabled
>[    5.154399] [drm:intel_modeset_readout_hw_state], [CONNECTOR:22:DP-2] hw state readout: disabled
>[    5.154402] [drm:intel_modeset_readout_hw_state], [CONNECTOR:23:HDMI-A-2] hw state readout: disabled
>[    5.154407] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[    5.154409] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[    5.154411] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 0
>[    5.154414] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    5.154418] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 5333756, gmch_n: 8388608, link_m: 148159, link_n: 524288, tu: 64
>[    5.154421] [drm:intel_dump_pipe_config], requested mode:
>[    5.154424] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0
>[    5.154427] [drm:intel_dump_pipe_config], adjusted mode:
>[    5.154430] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
>[    5.154433] [drm:intel_dump_crtc_timings], crtc timings: 0 1366 1414 1446 1578 768 770 775 806, type: 0x0 flags: 0x5
>[    5.154436] [drm:intel_dump_pipe_config], port clock: 0
>[    5.154438] [drm:intel_dump_pipe_config], pipe src size: 1024x768
>[    5.154441] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    5.154444] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x05560300, enabled
>[    5.154447] [drm:intel_dump_pipe_config], ips: 0
>[    5.154449] [drm:intel_dump_pipe_config], double wide: 0
>[    5.154452] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[    5.154454] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    5.154456] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    5.154459] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    5.154462] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    5.154464] [drm:intel_dump_pipe_config], requested mode:
>[    5.154467] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    5.154469] [drm:intel_dump_pipe_config], adjusted mode:
>[    5.154472] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    5.154475] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    5.154478] [drm:intel_dump_pipe_config], port clock: 0
>[    5.154480] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    5.154482] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    5.154485] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    5.154488] [drm:intel_dump_pipe_config], ips: 0
>[    5.154490] [drm:intel_dump_pipe_config], double wide: 0
>[    5.154492] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[    5.154495] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[    5.154497] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    5.154499] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    5.154502] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    5.154505] [drm:intel_dump_pipe_config], requested mode:
>[    5.154508] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    5.154510] [drm:intel_dump_pipe_config], adjusted mode:
>[    5.154513] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    5.154516] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    5.154518] [drm:intel_dump_pipe_config], port clock: 0
>[    5.154520] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    5.154523] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    5.154526] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    5.154528] [drm:intel_dump_pipe_config], ips: 0
>[    5.154530] [drm:intel_dump_pipe_config], double wide: 0
>[    5.154536] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[    5.154539] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[    5.154542] [drm:check_encoder_state], [ENCODER:18:TMDS-18]
>[    5.154545] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
>[    5.154547] [drm:check_crtc_state], [CRTC:3]
>[    5.154553] [drm:check_crtc_state], [CRTC:5]
>[    5.154555] [drm:check_crtc_state], [CRTC:7]
>[    5.154566] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[    5.154569] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[    5.154577] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    5.154582] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[    5.154586] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[    5.154590] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[    5.154593] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[    5.154596] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[    5.154599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[    5.154602] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[    5.154605] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[    5.154763] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    5.154769] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[    5.154774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[    5.154779] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[    5.154783] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[    5.154787] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[    5.154792] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[    5.154796] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[    5.154949] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    5.154953] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    5.154957] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[    5.154961] [drm:drm_setup_crtcs], 
>[    5.154964] [drm:drm_enable_connectors], connector 10 enabled? yes
>[    5.154967] [drm:drm_enable_connectors], connector 19 enabled? no
>[    5.154970] [drm:drm_enable_connectors], connector 20 enabled? no
>[    5.154973] [drm:drm_enable_connectors], connector 22 enabled? no
>[    5.154976] [drm:drm_enable_connectors], connector 23 enabled? no
>[    5.154980] [drm:drm_target_preferred], looking for cmdline mode on connector 10
>[    5.154983] [drm:drm_target_preferred], looking for preferred mode on connector 10
>[    5.154987] [drm:drm_target_preferred], found mode 1366x768
>[    5.154990] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[    5.154994] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
>[    5.154999] [drm:intelfb_create], no BIOS fb, allocating a new one
>[    5.155002] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000
>[    5.155009] [drm:i915_pages_create_for_stolen], offset=0x0, size=4227072
>[    5.155466] [drm:intelfb_create], allocated 1366x768 fb: 0x000a1000, bo ffff880135d40000
>[    5.155581] fbcon: inteldrmfb (fb0) is primary device
>[    5.155615] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.155616] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[    5.155617] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    5.155620] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    5.155622] [drm:drm_mode_debug_printmodeline], Modeline 24:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[    5.155624] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
>[    5.155625] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    5.155627] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    5.155629] [drm:connected_sink_compute_bpp], [CONNECTOR:10:eDP-1] checking for sink bpp constrains
>[    5.155630] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[    5.155633] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 76300KHz
>[    5.155634] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[    5.155635] [drm:intel_dp_compute_config], DP link bw required 137340 available 216000
>[    5.155638] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[    5.155639] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[    5.155640] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[    5.155641] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[    5.155642] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    5.155644] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64
>[    5.155644] [drm:intel_dump_pipe_config], requested mode:
>[    5.155647] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[    5.155647] [drm:intel_dump_pipe_config], adjusted mode:
>[    5.155650] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[    5.155652] [drm:intel_dump_crtc_timings], crtc timings: 76300 1366 1414 1446 1578 768 770 775 806, type: 0x48 flags: 0x9
>[    5.155653] [drm:intel_dump_pipe_config], port clock: 270000
>[    5.155654] [drm:intel_dump_pipe_config], pipe src size: 1366x768
>[    5.155655] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    5.155656] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    5.155657] [drm:intel_dump_pipe_config], ips: 1
>[    5.155658] [drm:intel_dump_pipe_config], double wide: 0
>[    5.174078] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    5.174083] [drm:ironlake_edp_backlight_off], 
>[    5.390849] [drm:ironlake_edp_panel_off], Turn eDP power off
>[    5.390854] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[    5.390859] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[    6.203527] [drm:ironlake_wait_panel_status], Wait complete
>[    6.203534] [drm:intel_update_fbc], no output, disabling
>[    6.203540] [drm:hsw_set_power_well], Requesting to disable the power well
>[    6.203563] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 5504
>[    6.203569] [drm:intel_crtc_mode_set], [ENCODER:9:TMDS-9] set [MODE:0:1366x768]
>[    6.203570] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[    6.203572] [drm:ironlake_edp_panel_on], Turn eDP power on
>[    6.203573] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    6.203577] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[    6.203578] [drm:ironlake_wait_panel_status], Wait complete
>[    6.203582] [drm:ironlake_wait_panel_on], Wait for panel power on
>[    6.203584] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
>[    6.350218] [drm:intel_print_rc6_info], Haswell: only RC6 available
>[    6.350219] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    6.356742] [drm:gen6_enable_rps], Overclocking supported. Max: 1000MHz, Overclock max: 1000MHz
>[    6.416712] [drm:ironlake_wait_panel_status], Wait complete
>[    6.417803] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    6.418249] [drm:intel_dp_start_link_train], clock recovery OK
>[    6.418991] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[    6.476629] [drm:g4x_wait_for_vblank], vblank wait timed out
>[    6.476781] [drm:ironlake_edp_backlight_on], 
>[    6.483298] [drm:intel_panel_enable_backlight], pipe A
>[    6.483301] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[    6.483306] [drm:intel_edp_psr_match_conditions], PSR disable by flag
>[    6.516607] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[    6.529935] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[    6.529938] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[    6.529940] [drm:check_encoder_state], [ENCODER:18:TMDS-18]
>[    6.529942] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
>[    6.529943] [drm:check_crtc_state], [CRTC:3]
>[    6.529948] [drm:check_crtc_state], [CRTC:5]
>[    6.529950] [drm:check_crtc_state], [CRTC:7]
>[    6.529953] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    6.529955] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    6.529957] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    6.529959] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    6.529960] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    6.529961] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    6.529966] Console: switching to colour frame buffer device 170x48
>[    6.529974] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    6.529976] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    6.529977] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    6.606026] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    6.606038] i915 0000:00:02.0: registered panic notifier
>[    6.617581] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    6.618471] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
>[    6.619301] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    6.619319] [drm:i915_gem_open], 
>[    6.619337] [drm:intel_crtc_cursor_set], cursor off
>[    6.619339] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    6.619341] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    6.619343] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    6.619344] [drm:intel_crtc_cursor_set], cursor off
>[    6.619345] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    6.619347] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    6.619349] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    6.619350] [drm:intel_crtc_cursor_set], cursor off
>[    6.619350] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    6.619352] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    6.619353] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    6.619367] [drm:i915_gem_open], 
>[    6.630319] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[3]
>[    6.630471] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    6.630478] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    6.630556] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    6.630576] xhci_hcd 0000:00:14.0: irq 61 for MSI/MSI-X
>[    6.630649] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    6.630650] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.630651] usb usb1: Product: xHCI Host Controller
>[    6.630653] usb usb1: Manufacturer: Linux 3.14.31-nrj-laptop-1rosa xhci_hcd
>[    6.630654] usb usb1: SerialNumber: 0000:00:14.0
>[    6.630799] hub 1-0:1.0: USB hub found
>[    6.630812] hub 1-0:1.0: 9 ports detected
>[    6.632058] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    6.632061] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    6.632091] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    6.632092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.632093] usb usb2: Product: xHCI Host Controller
>[    6.632094] usb usb2: Manufacturer: Linux 3.14.31-nrj-laptop-1rosa xhci_hcd
>[    6.632094] usb usb2: SerialNumber: 0000:00:14.0
>[    6.632203] hub 2-0:1.0: USB hub found
>[    6.632212] hub 2-0:1.0: 4 ports detected
>[    6.632793] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    6.632798] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
>[    6.632809] ehci-pci 0000:00:1d.0: debug port 2
>[    6.636708] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    6.636723] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
>[    6.646538] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    6.646591] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    6.646592] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.646594] usb usb3: Product: EHCI Host Controller
>[    6.646595] usb usb3: Manufacturer: Linux 3.14.31-nrj-laptop-1rosa ehci_hcd
>[    6.646596] usb usb3: SerialNumber: 0000:00:1d.0
>[    6.646763] hub 3-0:1.0: USB hub found
>[    6.646768] hub 3-0:1.0: 3 ports detected
>[    6.677808] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[3]
>[    6.678835] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[    6.679579] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[    6.680257] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[    6.681101] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    6.681793] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[    6.682753] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[    6.682756] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[    6.682762] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[    6.685139] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[    6.685811] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[    6.685823] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[    6.685827] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[    6.685830] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[    6.685831] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[    6.685831] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[    6.685833] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[    6.685835] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    6.685836] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[    6.685837] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[    6.686000] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    6.686001] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[    6.686002] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[    6.686003] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    6.686004] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[    6.686005] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[    6.686154] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    6.686155] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[    6.686156] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[    6.686157] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[    6.686158] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[    6.686159] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[    6.686160] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[    6.686161] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[    6.686162] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[    6.686163] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[    6.686164] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[    6.686165] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[    6.686166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[    6.686167] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[    6.686321] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    6.686322] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    6.686323] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[    6.686324] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[    6.686324] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[    6.686325] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[    6.686479] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    6.686480] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    6.686480] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[    6.686496] [drm:drm_mode_addfb], [FB:26]
>[    6.729799] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[    6.730702] PM: Marking nosave pages: [mem 0xbab7f000-0xbbffefff]
>[    6.731628] PM: Marking nosave pages: [mem 0xbc000000-0xffffffff]
>[    6.733155] PM: Basic memory bitmaps created
>[    6.756513] PM: Basic memory bitmaps freed
>[    6.757867] video LNXVIDEO:00: Restoring backlight state
>[    6.762037] PM: Starting manual resume from disk
>[    6.762871] PM: Hibernation image partition 8:1 present
>[    6.763710] PM: Looking for hibernation image.
>[    6.818477] PM: Image not found (code -22)
>[    6.819811] PM: Hibernation image not present or could not be loaded.
>[    6.839881] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
>[    6.845851] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    6.853444] usb 2-3: New USB device found, idVendor=0424, idProduct=5534
>[    6.854970] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
>[    6.856500] usb 2-3: Product: USB5534B
>[    6.857464] usb 2-3: Manufacturer: SMSC
>[    6.859166] hub 2-3:1.0: USB hub found
>[    6.860646] hub 2-3:1.0: 2 ports detected
>[    6.931184] [drm:drm_mode_addfb], [FB:26]
>[    6.931958] [drm:drm_mode_setcrtc], [CRTC:3]
>[    6.932697] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[    6.933419] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    6.934093] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
>[    6.934760] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    6.937775] [drm:ironlake_update_plane], Writing base 004A9000 00000000 0 0 5504
>[    6.952429] [drm:drm_mode_setcrtc], [CRTC:3]
>[    6.952437] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[    6.952440] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[    6.952442] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    6.952445] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    7.019761] usb 1-2: new high-speed USB device number 2 using xhci_hcd
>[    7.091877] systemd-journald[100]: Received SIGTERM
>[    7.193322] usb 1-2: New USB device found, idVendor=03f0, idProduct=7611
>[    7.193328] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    7.193331] usb 1-2: Product: Deskjet F2400 series
>[    7.193332] usb 1-2: Manufacturer: HP
>[    7.193334] usb 1-2: SerialNumber: CN9CPB522905H4
>[    7.352932] usb 1-3: new high-speed USB device number 3 using xhci_hcd
>[    7.382205] random: nonblocking pool is initialized
>[    7.526486] usb 1-3: New USB device found, idVendor=0424, idProduct=2134
>[    7.526493] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    7.526495] usb 1-3: Product: USB2134B
>[    7.526497] usb 1-3: Manufacturer: SMSC
>[    7.526833] hub 1-3:1.0: USB hub found
>[    7.526889] hub 1-3:1.0: 2 ports detected
>[    7.686015] usb 1-4: new full-speed USB device number 4 using xhci_hcd
>[    7.861852] usb 1-4: New USB device found, idVendor=0a5c, idProduct=21f1
>[    7.861857] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    7.861859] usb 1-4: Product: BCM20702A0
>[    7.861861] usb 1-4: Manufacturer: Broadcom Corp
>[    7.861863] usb 1-4: SerialNumber: B8EE658FD019
>[    7.997659] RUN systemd EFI generator
>[    7.998136] Stop write mount to EFI
>[    8.019181] usb 1-5: new full-speed USB device number 5 using xhci_hcd
>[    8.193968] usb 1-5: New USB device found, idVendor=138a, idProduct=003f
>[    8.193974] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>[    8.193976] usb 1-5: SerialNumber: 00a01cd17793
>[    8.352386] usb 1-7: new high-speed USB device number 6 using xhci_hcd
>[    8.512354] usb 1-7: New USB device found, idVendor=04f2, idProduct=b3ed
>[    8.512359] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    8.512362] usb 1-7: Product: HP HD Webcam
>[    8.512364] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
>[    8.512366] usb 1-7: SerialNumber: 200901010001
>[    8.618885] usb 3-1: new high-speed USB device number 2 using ehci-pci
>[    8.742355] usb 3-1: New USB device found, idVendor=8087, idProduct=8000
>[    8.742362] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    8.742642] hub 3-1:1.0: USB hub found
>[    8.742726] hub 3-1:1.0: 8 ports detected
>[    8.822072] usb 1-3.2: new low-speed USB device number 7 using xhci_hcd
>[    8.897943] systemd-readahead[397]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    8.920482] usb 1-3.2: New USB device found, idVendor=046d, idProduct=c024
>[    8.920487] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    8.920489] usb 1-3.2: Product: USB-PS/2 Optical Mouse
>[    8.920491] usb 1-3.2: Manufacturer: B16_b_02
>[    8.920612] usb 1-3.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   10.008181] EXT4-fs (sda1): re-mounted. Opts: acl
>[   10.036572] systemd-readahead[396]: Failed to read event: Value too large for defined data type
>[   10.084890] systemd-journald[406]: Vacuuming done, freed 0 bytes
>[   10.120436] systemd-udevd[432]: starting version 208
>[   10.183366] Adding 5916668k swap on /swap.  Priority:-1 extents:10 across:6367228k FS
>[   10.314527] Non-volatile memory driver v1.3
>[   10.814764] pps_core: LinuxPPS API ver. 1 registered
>[   10.814769] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[   10.817470] PTP clock support registered
>[   10.851885] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
>[   10.881173] Initializing HPQ6001 module
>[   10.881355] input: HP Wireless hotkeys as /devices/virtual/input/input13
>[   10.888918] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
>[   10.912794] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[   10.912799] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[   10.913033] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[   10.913052] e1000e 0000:00:19.0: irq 63 for MSI/MSI-X
>[   10.913701] ACPI: Battery Slot [BAT0] (battery present)
>[   10.913976] ACPI: AC Adapter [AC] (on-line)
>[   10.916884] hidraw: raw HID events driver (C) Jiri Kosina
>[   10.936347] usbcore: registered new interface driver usbhid
>[   10.936352] usbhid: USB HID core driver
>[   10.988631] hp_accel: laptop model unknown, using default axes configuration
>[   11.107484] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
>[   11.107493] lis3lv02d: 8 bits 3DC sensor found
>[   11.112120] e1000e 0000:00:19.0 eth0: registered PHC clock
>[   11.112127] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 6c:c2:17:7b:9c:76
>[   11.112130] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[   11.112157] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[   11.112538] HDA driver get symbol successfully from i915 module
>[   11.112548] [drm:hsw_set_power_well], Enabling power well
>[   11.112596] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
>[   11.112836] snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
>[   11.131471] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
>[   11.131548] mute LED gpio 1 polarity 0
>[   11.131807] autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
>[   11.131810]    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
>[   11.131812]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
>[   11.131813]    mono: mono_out=0x0
>[   11.131815]    inputs:
>[   11.131817]      Mic=0xc
>[   11.131819]      Internal Mic=0x11
>[   11.131820]      Line=0xf
>[   11.134004] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input17
>[   11.134145] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
>[   11.134237] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
>[   11.168221] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
>[   11.168356] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
>[   11.168434] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
>[   11.168506] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
>[   11.247117] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   11.272478] WARNING! power/level is deprecated; use power/control instead
>[   11.403926] usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7611
>[   11.403960] usbcore: registered new interface driver usblp
>[   11.404975] Bluetooth: Core ver 2.18
>[   11.404992] NET: Registered protocol family 31
>[   11.404994] Bluetooth: HCI device and connection manager initialized
>[   11.405002] Bluetooth: HCI socket layer initialized
>[   11.405005] Bluetooth: L2CAP socket layer initialized
>[   11.405016] Bluetooth: SCO socket layer initialized
>[   11.407538] usbcore: registered new interface driver btusb
>[   11.433206] media: Linux media interface: v0.10
>[   11.443950] Linux video capture interface: v2.00
>[   11.455286] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3ed)
>[   11.456519] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input22
>[   11.456594] usbcore: registered new interface driver uvcvideo
>[   11.456596] USB Video Class driver (1.1.1)
>[   11.483288] cfg80211: Calling CRDA to update world regulatory domain
>[   11.483400] rtsx_pci 0000:03:00.0: irq 66 for MSI/MSI-X
>[   11.483415] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 66
>[   11.493142] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258)
>[   11.493149] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.493153] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
>[   11.493156] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPIO) (20131218/utaddress-258)
>[   11.493159] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.493160] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
>[   11.493162] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPIO) (20131218/utaddress-258)
>[   11.493164] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20131218/utaddress-258)
>[   11.493167] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000080f (\IO_T) (20131218/utaddress-258)
>[   11.493169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.493170] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   11.568642] ACPI Warning: SystemIO range 0x000000000000ef80-0x000000000000ef9f conflicts with OpRegion 0x000000000000ef80-0x000000000000ef8f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
>[   11.568649] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.584847] wl: module license 'MIXED/Proprietary' taints kernel.
>[   11.584853] Disabling lock debugging due to kernel taint
>[   11.621945] wlan0: Broadcom BCM4359 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
>[   11.627346] thermal LNXTHERM:00: registered as thermal_zone0
>[   11.627352] ACPI: Thermal Zone [CPUZ] (55 C)
>[   11.725939] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
>[   11.816032] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
>[   11.816087] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
>[   11.816119] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
>[   11.816211] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   11.825735] AVX2 version of gcm_enc/dec engaged.
>[   11.858801] kvm: disabled by bios
>[   12.025337] intel_rapl: domain uncore energy ctr 3489:3489 not working, skip
>[   12.058479] kvm: disabled by bios
>[   12.137053] thermal LNXTHERM:01: registered as thermal_zone2
>[   12.137058] ACPI: Thermal Zone [GFXZ] (0 C)
>[   12.393795] thermal LNXTHERM:02: registered as thermal_zone3
>[   12.393800] ACPI: Thermal Zone [EXTZ] (38 C)
>[   12.408965] thermal LNXTHERM:03: registered as thermal_zone4
>[   12.408970] ACPI: Thermal Zone [LOCZ] (37 C)
>[   12.416735] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input23
>[   12.427211] thermal LNXTHERM:04: registered as thermal_zone5
>[   12.427216] ACPI: Thermal Zone [BATZ] (34 C)
>[   12.427649] thermal LNXTHERM:05: registered as thermal_zone6
>[   12.427653] ACPI: Thermal Zone [PCHZ] (114 C)
>[   12.740201] input: HP WMI hotkeys as /devices/virtual/input/input24
>[   12.774233] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:046D:C024.0001/input/input25
>[   12.774368] hid-generic 0003:046D:C024.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:14.0-3.2/input0
>[   12.822636] ppdev: user-space parallel port driver
>[   13.129821] iTCO_vendor_support: vendor-support=0
>[   13.130702] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[   13.130741] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[   13.130807] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>[   13.140350] cfg80211: World regulatory domain updated:
>[   13.140356] cfg80211:  DFS Master region: unset
>[   13.140358] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   13.140361] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   13.140363] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   13.140365] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[   13.140366] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm)
>[   13.140368] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm)
>[   13.140370] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
>[   13.140372] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[   13.140373] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[   13.145999] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
>[   15.940229] systemd-journald[406]: Received request to flush runtime journal from PID 1
>[   17.057922] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   17.057927] Bluetooth: BNEP filters: protocol multicast
>[   17.057935] Bluetooth: BNEP socket layer initialized
>[   17.216843] [drm:i915_gem_open], 
>[   17.242412] [drm:i915_gem_open], 
>[   17.242420] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[3]
>[   17.242605] [drm:i915_gem_open], 
>[   17.242611] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[3]
>[   17.242614] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[3]
>[   17.243005] [drm:drm_mode_addfb], [FB:27]
>[   17.243030] [drm:drm_mode_addfb], [FB:27]
>[   17.243218] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[3]
>[   17.243221] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[5] ENCODERS[3]
>[   17.243250] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   17.243254] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   17.243335] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   17.243345] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[   17.243348] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[   17.243357] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   17.243359] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   17.243368] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[   17.243370] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[   17.243378] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[   17.243379] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[   17.245631] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   17.245635] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   17.245682] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   17.245685] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   17.274484] [drm:drm_mode_addfb], [FB:27]
>[   17.274495] [drm:drm_mode_setcrtc], [CRTC:3]
>[   17.274500] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[   17.274502] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
>[   17.274505] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
>[   17.274507] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   17.278231] [drm:ironlake_update_plane], Writing base 008D1000 00000000 0 0 5632
>[   17.290643] [drm:i915_setup_compression], reserved 8650752 bytes of contiguous stolen space for FBC
>[   17.340664] [drm:gen7_enable_fbc], enabled fbc on plane A
>[   17.350643] systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 4325 (wine)
>[   18.078327] e1000e 0000:00:19.0: irq 63 for MSI/MSI-X
>[   18.180212] e1000e 0000:00:19.0: irq 63 for MSI/MSI-X
>[   18.180317] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   18.242153] NET: Registered protocol family 17
>[   19.707547] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[   19.707553] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
>[   19.707582] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   25.063500] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   25.782708] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   25.801186] Netfilter messages via NETLINK v0.30.
>[   25.804100] ctnetlink v0.93: registering with nfnetlink.
>[   26.007128] Bridge firewalling registered
>[   37.462340] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   37.462346] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[   37.462349] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[   37.462359] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   37.462363] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[   37.462365] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[   37.462368] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[   37.462370] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   37.462543] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[   37.462545] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[   37.462547] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[   37.462550] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[   37.462553] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   37.462554] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[   37.462556] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[   37.462765] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   37.462769] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   37.462771] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[   37.462777] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[   37.462780] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[   37.462782] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[   37.462786] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[   37.462790] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[   37.462796] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[   37.462801] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[   37.462970] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   37.462973] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   37.462975] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[   38.069087] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   38.069095] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[   38.069099] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[   38.069113] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   38.069118] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[   38.069122] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[   38.069126] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[   38.069129] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   38.069258] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[   38.069261] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[   38.069264] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[   38.069267] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[   38.069272] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   38.069275] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[   38.069277] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[   38.069446] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   38.069451] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   38.069455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[   38.069462] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[   38.069465] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[   38.069467] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[   38.069470] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[   38.069474] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[   38.069476] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[   38.069479] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[   38.069641] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   38.069643] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   38.069646] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[   38.069767] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   38.069789] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   38.069792] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   38.074179] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   38.074196] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   38.074199] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   38.074257] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   38.074267] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   38.074269] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   38.218934] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   38.218990] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   38.218994] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   38.219101] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   38.219119] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   38.219122] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   38.219269] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   38.219272] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   38.479810] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   38.479837] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   38.479840] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   38.479915] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   38.479931] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   38.479933] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   38.480033] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   38.480048] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   38.480050] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   38.480112] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   38.480125] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   38.480128] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   39.219617] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   39.219623] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[   39.219626] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[   39.219638] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   39.219641] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[   39.219644] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[   39.219646] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[   39.219649] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   39.219732] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[   39.219734] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[   39.219736] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[   39.219739] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[   39.219742] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   39.219743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[   39.219745] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[   39.219904] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   39.219906] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   39.219908] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[   39.219912] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[   39.219913] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[   39.219914] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[   39.219916] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[   39.219919] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[   39.219920] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[   39.219921] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[   39.220072] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   39.220073] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   39.220075] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[   41.024613] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   41.024651] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   41.024655] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   41.024787] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[   41.024802] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[   41.024804] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[   65.669607] cfg80211: Calling CRDA for country: GB
>[   65.683832] cfg80211: Regulatory domain changed to country: GB
>[   65.683835] cfg80211:  DFS Master region: unset
>[   65.683837] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   65.683838] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   65.683839] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[   65.683840] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[   65.683841] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm)
>[   65.683842] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[   78.981490] [drm:intel_crtc_cursor_set], cursor off
>[   99.013989] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 5 - cnt: 0
>[   99.014023] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[   99.014028] [drm:i915_hotplug_work_func], Connector DP-2 (pin 5) received hotplug event.
>[   99.014031] [drm:i915_hotplug_work_func], Connector HDMI-A-2 (pin 5) received hotplug event.
>[   99.014037] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[   99.014447] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[   99.015328] [drm:intel_dp_probe_oui], Sink OUI: 000000
>[   99.015553] [drm:intel_dp_probe_oui], Branch OUI: 006037
>[   99.021650] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.182269] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.182275] [drm:intel_hpd_irq_event], [CONNECTOR:22:DP-2] status updated from disconnected to connected
>[   99.182277] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[   99.182437] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   99.182439] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   99.195537] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   99.195542] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[   99.195545] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[   99.195556] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   99.195559] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[   99.195562] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[   99.195564] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[   99.195566] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   99.195647] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[   99.195649] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[   99.195651] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[   99.195653] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[   99.195665] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   99.195667] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[   99.195668] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[   99.195863] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   99.195867] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   99.195870] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[   99.195879] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[   99.195881] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[   99.195883] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[   99.196297] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[   99.197095] [drm:intel_dp_probe_oui], Sink OUI: 000000
>[   99.197309] [drm:intel_dp_probe_oui], Branch OUI: 006037
>[   99.203200] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.365485] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.371422] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.533162] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.533176] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   99.533188] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] probed modes :
>[   99.533192] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   99.533196] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   99.533199] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[   99.533202] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[   99.533206] [drm:drm_mode_debug_printmodeline], Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   99.533209] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   99.533212] [drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   99.533215] [drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   99.533218] [drm:drm_mode_debug_printmodeline], Modeline 43:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[   99.533222] [drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   99.533225] [drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[   99.533228] [drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   99.533231] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   99.533234] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   99.533237] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[   99.533241] [drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[   99.533244] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[   99.533247] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   99.533258] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[   99.533295] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[   99.533298] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[   99.533300] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[   99.533460] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   99.533462] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   99.533465] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[   99.534507] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   99.534511] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[   99.534513] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[   99.534519] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   99.534522] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[   99.534525] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[   99.534527] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[   99.534529] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   99.534609] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[   99.534611] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[   99.534612] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[   99.534614] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[   99.534617] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   99.534618] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[   99.534619] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[   99.534788] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   99.534795] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   99.534802] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[   99.534813] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[   99.534820] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[   99.534827] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[   99.535224] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[   99.536019] [drm:intel_dp_probe_oui], Sink OUI: 000000
>[   99.536233] [drm:intel_dp_probe_oui], Branch OUI: 006037
>[   99.542182] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.707369] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.713320] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.878691] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.878705] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   99.878718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] probed modes :
>[   99.878722] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   99.878726] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   99.878729] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[   99.878732] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[   99.878735] [drm:drm_mode_debug_printmodeline], Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   99.878739] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   99.878742] [drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   99.878745] [drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   99.878748] [drm:drm_mode_debug_printmodeline], Modeline 43:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[   99.878751] [drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   99.878754] [drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[   99.878758] [drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   99.878761] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   99.878764] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   99.878767] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[   99.878770] [drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[   99.878773] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[   99.878776] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   99.878786] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[   99.878812] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[   99.878815] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[   99.878817] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[   99.878972] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   99.878974] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[   99.878976] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[   99.888440] [drm:drm_mode_addfb], [FB:46]
>[   99.888454] [drm:drm_mode_setcrtc], [CRTC:3]
>[   99.888458] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[   99.888460] [drm:intel_crtc_set_config], [CRTC:3] [FB:46] #connectors=1 (x y) (0 0)
>[   99.888463] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
>[   99.888465] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   99.895568] [drm:ironlake_update_plane], Writing base 03CDF000 00000000 0 0 10752
>[   99.907929] [drm:i915_setup_compression], reserved 22020096 bytes of contiguous stolen space for FBC
>[   99.907933] [drm:intel_update_fbc], disabling active FBC for update
>[   99.907937] [drm:ironlake_disable_fbc], disabled FBC
>[   99.913997] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   99.914005] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[   99.914008] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[   99.914019] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[   99.914023] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[   99.914026] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[   99.914028] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[   99.914030] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[   99.914129] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[   99.914131] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[   99.914132] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[   99.914135] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[   99.914139] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[   99.914140] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[   99.914142] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[   99.914309] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   99.914312] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[   99.914315] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[   99.914322] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[   99.914323] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[   99.914326] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[   99.914737] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[   99.915533] [drm:intel_dp_probe_oui], Sink OUI: 000000
>[   99.915747] [drm:intel_dp_probe_oui], Branch OUI: 006037
>[   99.921597] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[   99.957908] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  100.084284] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[  100.093663] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[  100.251981] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[  100.251995] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  100.252010] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] probed modes :
>[  100.252013] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[  100.252017] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[  100.252020] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[  100.252023] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[  100.252027] [drm:drm_mode_debug_printmodeline], Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[  100.252030] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  100.252033] [drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[  100.252036] [drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  100.252039] [drm:drm_mode_debug_printmodeline], Modeline 43:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[  100.252042] [drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[  100.252046] [drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[  100.252049] [drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[  100.252052] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[  100.252055] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[  100.252058] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[  100.252061] [drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[  100.252064] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[  100.252068] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[  100.252079] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[  100.252107] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[  100.252110] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[  100.252112] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[  100.252267] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  100.252269] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  100.252271] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[  100.260946] [drm:drm_mode_setcrtc], [CRTC:5]
>[  100.260961] [drm:drm_mode_setcrtc], [CONNECTOR:22:DP-2]
>[  100.260967] [drm:intel_crtc_set_config], [CRTC:5] [FB:46] #connectors=1 (x y) (1366 0)
>[  100.260972] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[  100.260976] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  100.260981] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  100.260987] [drm:drm_mode_debug_printmodeline], Modeline 27:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  100.260991] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=1
>[  100.260994] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  100.260998] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  100.261002] [drm:intel_modeset_stage_output_state], [CONNECTOR:22:DP-2] to [CRTC:5]
>[  100.261005] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  100.265105] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  100.265111] [drm:connected_sink_compute_bpp], [CONNECTOR:22:DP-2] checking for sink bpp constrains
>[  100.265114] [drm:intel_dp_compute_config], DP link computation with max lane count 2 max bw 0a pixel clock 108000KHz
>[  100.265120] [drm:intel_dp_compute_config], DP link bw 06 lane count 2 clock 162000 bpp 24
>[  100.265122] [drm:intel_dp_compute_config], DP link bw required 259200 available 259200
>[  100.265125] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[  100.265127] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
>[  100.265129] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  100.265131] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[  100.265133] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  100.265135] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 4194304, gmch_n: 4194304, link_m: 174762, link_n: 262144, tu: 64
>[  100.265137] [drm:intel_dump_pipe_config], requested mode:
>[  100.265140] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  100.265142] [drm:intel_dump_pipe_config], adjusted mode:
>[  100.265144] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  100.265147] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[  100.265148] [drm:intel_dump_pipe_config], port clock: 162000
>[  100.265150] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
>[  100.265152] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  100.265154] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  100.265155] [drm:intel_dump_pipe_config], ips: 0
>[  100.265157] [drm:intel_dump_pipe_config], double wide: 0
>[  100.265186] [drm:ironlake_update_plane], Writing base 03CDF000 FFFFFFFFFFFF7558 86 0 10752
>[  100.265192] [drm:intel_crtc_mode_set], [ENCODER:21:TMDS-21] set [MODE:0:]
>[  100.265194] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B
>[  100.266442] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  100.267033] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  100.267602] [drm:intel_dp_start_link_train], clock recovery OK
>[  100.274370] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[  100.341043] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[  100.341050] [drm:intel_update_fbc], unsupported config, disabling FBC
>[  100.341054] [drm:ironlake_disable_fbc], disabled FBC
>[  100.361036] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[  100.361045] [drm:intel_connector_check_state], [CONNECTOR:22:DP-2]
>[  100.361049] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[  100.361052] [drm:check_encoder_state], [ENCODER:18:TMDS-18]
>[  100.361054] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
>[  100.361057] [drm:check_crtc_state], [CRTC:3]
>[  100.361066] [drm:check_crtc_state], [CRTC:5]
>[  100.361073] [drm:check_crtc_state], [CRTC:7]
>[  100.362699] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  100.362707] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[  100.362711] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[  100.362727] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  100.362733] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[  100.362739] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  100.362745] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[  100.362750] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  100.362894] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[  100.362897] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[  100.362899] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[  100.362903] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[  100.362907] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[  100.362909] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[  100.362912] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[  100.363077] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  100.363081] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  100.363084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[  100.363093] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[  100.363095] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[  100.363099] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[  100.363499] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[  100.364328] [drm:intel_dp_probe_oui], Sink OUI: 000000
>[  100.364553] [drm:intel_dp_probe_oui], Branch OUI: 006037
>[  100.370514] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[  100.536040] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[  100.542099] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[  100.701698] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[  100.701713] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  100.701729] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] probed modes :
>[  100.701733] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[  100.701736] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[  100.701739] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[  100.701743] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[  100.701747] [drm:drm_mode_debug_printmodeline], Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[  100.701750] [drm:drm_mode_debug_printmodeline], Modeline 40:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  100.701753] [drm:drm_mode_debug_printmodeline], Modeline 41:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[  100.701756] [drm:drm_mode_debug_printmodeline], Modeline 42:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  100.701760] [drm:drm_mode_debug_printmodeline], Modeline 43:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[  100.701763] [drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[  100.701766] [drm:drm_mode_debug_printmodeline], Modeline 45:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[  100.701769] [drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[  100.701772] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[  100.701775] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[  100.701778] [drm:drm_mode_debug_printmodeline], Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[  100.701782] [drm:drm_mode_debug_printmodeline], Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[  100.701785] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[  100.701788] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[  100.701800] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[  100.701833] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[  100.701835] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[  100.701838] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[  100.701998] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  100.702000] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  100.702003] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[  100.703754] [drm:intel_crtc_cursor_set], cursor off
>[  105.717919] [drm:intel_crtc_cursor_set], cursor off
>[  131.164055] [drm:i915_setup_compression], reserved 22020096 bytes of contiguous stolen space for FBC
>[  131.164066] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[  131.164072] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[  131.164076] [drm:check_encoder_state], [ENCODER:18:TMDS-18]
>[  131.164079] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
>[  131.164082] [drm:check_crtc_state], [CRTC:3]
>[  131.164091] [drm:check_crtc_state], [CRTC:5]
>[  131.164094] [drm:check_crtc_state], [CRTC:7]
>[  131.164112] [drm:drm_mode_setcrtc], [CRTC:5]
>[  131.164115] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[  131.164119] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=0
>[  131.164123] [drm:intel_modeset_stage_output_state], [CONNECTOR:22:DP-2] to [NOCRTC]
>[  131.164125] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  131.164128] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  131.164131] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  131.164136] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[  131.164144] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[  131.164148] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[  131.164152] [drm:check_encoder_state], [ENCODER:18:TMDS-18]
>[  131.164155] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
>[  131.164157] [drm:check_crtc_state], [CRTC:3]
>[  131.164164] [drm:check_crtc_state], [CRTC:5]
>[  131.164167] [drm:check_crtc_state], [CRTC:7]
>[  131.164795] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  131.164799] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[  131.164802] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[  131.164814] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  131.164818] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[  131.164822] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  131.164825] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[  131.164828] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  131.164947] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[  131.164949] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[  131.164951] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[  131.164954] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[  131.164958] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[  131.164960] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[  131.164962] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[  131.165167] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  131.165174] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  131.165178] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[  131.165195] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[  131.165199] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[  131.165203] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[  131.165646] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[  131.191156] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  131.213844] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  131.222611] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  131.252545] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  131.257062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[  131.257220] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[  131.257222] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[  131.257224] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[  131.257423] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  131.257427] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  131.257430] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[  131.258085] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  131.258089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[  131.258091] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[  131.258102] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  131.258105] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[  131.258109] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  131.258111] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[  131.258114] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  131.258212] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[  131.258214] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[  131.258216] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[  131.258219] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[  131.258222] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[  131.258224] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[  131.258225] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[  131.258390] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  131.258393] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  131.258395] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[  131.258399] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[  131.258401] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[  131.258403] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[  131.258810] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[  131.284277] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  131.315856] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  131.345795] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  131.350417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[  131.350445] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[  131.350449] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[  131.350452] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[  131.350697] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  131.350705] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  131.350708] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[  131.354267] [drm:intel_crtc_cursor_set], cursor off
>[  131.373573] [drm:intel_panel_get_backlight], get backlight PWM = 937
>[  131.373592] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=0/937
>[  131.373595] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  131.373623] [drm:ironlake_disable_fbc], disabled FBC
>[  131.397077] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  131.397086] [drm:ironlake_edp_backlight_off], 
>[  131.613802] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[  131.613814] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  131.613818] [drm:ironlake_edp_panel_off], Turn eDP power off
>[  131.613823] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[  131.613828] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[  132.426491] [drm:ironlake_wait_panel_status], Wait complete
>[  132.426507] [drm:intel_update_fbc], no output, disabling
>[  132.426516] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[  132.426519] [drm:check_encoder_state], [ENCODER:18:TMDS-18]
>[  132.426522] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
>[  132.426524] [drm:check_crtc_state], [CRTC:3]
>[  132.426528] [drm:check_crtc_state], [CRTC:5]
>[  132.426530] [drm:check_crtc_state], [CRTC:7]
>[  132.426555] [drm:drm_mode_setcrtc], [CRTC:3]
>[  132.426557] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[  132.426561] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
>[  132.426564] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [NOCRTC]
>[  132.426565] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  132.426567] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  132.426570] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[  132.426576] [drm:hsw_can_enable_package_c8], Not enabling PC8: power well on
>[  132.426580] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[  132.426583] [drm:check_encoder_state], [ENCODER:18:TMDS-18]
>[  132.426585] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
>[  132.426586] [drm:check_crtc_state], [CRTC:3]
>[  132.426589] [drm:check_crtc_state], [CRTC:5]
>[  132.426591] [drm:check_crtc_state], [CRTC:7]
>[  132.434716] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  132.434722] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[  132.434725] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[  132.434736] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  132.434743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[  132.434748] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  132.434750] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[  132.434754] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  132.434922] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[  132.434924] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[  132.434925] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[  132.434937] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[  132.434940] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[  132.434942] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[  132.434944] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[  132.435105] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  132.435109] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  132.435111] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[  132.435117] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[  132.435119] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[  132.435121] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[  132.435551] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[  132.461017] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  132.491947] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  132.521805] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  132.526355] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[  132.526370] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[  132.526373] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[  132.526374] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[  132.526537] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  132.526541] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  132.526543] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[  132.527484] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  132.527487] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[  132.527489] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[  132.527498] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  132.527500] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[  132.527503] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  132.527505] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[  132.527506] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  132.527585] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[  132.527586] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[  132.527587] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[  132.527590] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[  132.527592] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[  132.527593] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[  132.527595] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[  132.527786] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  132.527790] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  132.527793] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[  132.527802] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[  132.527804] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[  132.527806] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[  132.528233] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[  132.553708] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  132.585111] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  132.615095] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  132.619658] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[  132.619669] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[  132.619671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[  132.619673] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[  132.619835] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  132.619838] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  132.619841] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[  132.656101] [drm:drm_mode_addfb], [FB:26]
>[  132.656121] [drm:drm_mode_setcrtc], [CRTC:3]
>[  132.656146] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[  132.656151] [drm:intel_crtc_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
>[  132.656161] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[  132.656164] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  132.656169] [drm:drm_mode_debug_printmodeline], Modeline 24:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  132.656171] [drm:drm_mode_debug_printmodeline], Modeline 27:"" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[  132.656173] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
>[  132.656176] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  132.656179] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  132.656181] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  132.656185] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  132.656190] [drm:connected_sink_compute_bpp], [CONNECTOR:10:eDP-1] checking for sink bpp constrains
>[  132.656192] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[  132.656203] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 76300KHz
>[  132.656206] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[  132.656208] [drm:intel_dp_compute_config], DP link bw required 137340 available 216000
>[  132.656212] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  132.656216] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  132.656217] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[  132.656219] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  132.656221] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  132.656223] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64
>[  132.656224] [drm:intel_dump_pipe_config], requested mode:
>[  132.656227] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[  132.656228] [drm:intel_dump_pipe_config], adjusted mode:
>[  132.656231] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  132.656233] [drm:intel_dump_crtc_timings], crtc timings: 76300 1366 1414 1446 1578 768 770 775 806, type: 0x48 flags: 0x9
>[  132.656234] [drm:intel_dump_pipe_config], port clock: 270000
>[  132.656236] [drm:intel_dump_pipe_config], pipe src size: 1024x768
>[  132.656237] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  132.656240] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00ab0000, size: 0x04000300, enabled
>[  132.656241] [drm:intel_dump_pipe_config], ips: 1
>[  132.656242] [drm:intel_dump_pipe_config], double wide: 0
>[  132.660929] [drm:ironlake_update_plane], Writing base 0480F000 00000000 0 0 4096
>[  132.660938] [drm:intel_crtc_mode_set], [ENCODER:9:TMDS-9] set [MODE:0:]
>[  132.660940] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[  132.660943] [drm:ironlake_edp_panel_on], Turn eDP power on
>[  132.660945] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  132.660949] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[  132.660951] [drm:ironlake_wait_panel_status], Wait complete
>[  132.660955] [drm:ironlake_wait_panel_on], Wait for panel power on
>[  132.660958] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
>[  132.872863] [drm:ironlake_wait_panel_status], Wait complete
>[  132.873977] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  132.874421] [drm:intel_dp_start_link_train], clock recovery OK
>[  132.875163] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[  132.932877] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  132.933067] [drm:ironlake_edp_backlight_on], 
>[  132.939481] [drm:intel_panel_enable_backlight], pipe A
>[  132.939487] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[  132.939492] [drm:intel_edp_psr_match_conditions], PSR disable by flag
>[  132.972797] [drm:i915_setup_compression], reserved 8290304 bytes of contiguous stolen space for FBC
>[  132.986123] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[  132.986128] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[  132.986130] [drm:check_encoder_state], [ENCODER:18:TMDS-18]
>[  132.986131] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
>[  132.986133] [drm:check_crtc_state], [CRTC:3]
>[  132.986139] [drm:check_crtc_state], [CRTC:5]
>[  132.986141] [drm:check_crtc_state], [CRTC:7]
>[  132.986182] [drm:intel_backlight_device_update_status], updating intel_backlight, brightness=937/937
>[  132.986184] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[  132.988193] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  132.988200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[  132.988204] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[  132.988219] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  132.988224] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[  132.988228] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  132.988231] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[  132.988234] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  132.988323] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[  132.988324] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[  132.988326] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[  132.988329] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[  132.988332] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[  132.988334] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[  132.988335] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[  132.988496] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  132.988500] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  132.988503] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[  132.988509] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[  132.988511] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[  132.988513] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[  132.988926] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[  133.014378] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  133.022804] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  133.044915] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  133.074969] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  133.079421] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[  133.079437] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[  133.079440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[  133.079442] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[  133.079652] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  133.079657] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  133.079660] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[  133.084304] [drm:intel_crtc_cursor_set], cursor off
>[  133.091803] [drm:intel_crtc_cursor_set], cursor off
>[  133.092632] [drm:drm_mode_addfb], [FB:27]
>[  133.092651] [drm:drm_mode_setcrtc], [CRTC:3]
>[  133.092659] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[  133.092664] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
>[  133.092670] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
>[  133.092673] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  133.097711] [drm:ironlake_update_plane], Writing base 03CDF000 00000000 0 0 5632
>[  133.102712] [drm:i915_setup_compression], reserved 22020096 bytes of contiguous stolen space for FBC
>[  133.102716] [drm:intel_update_fbc], disabling active FBC for update
>[  133.102718] [drm:ironlake_disable_fbc], disabled FBC
>[  133.103932] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  133.103939] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[  133.103943] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[  133.103965] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  133.103971] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[  133.103975] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  133.103979] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[  133.103982] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  133.104135] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[  133.104138] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[  133.104140] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[  133.104144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[  133.104148] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[  133.104150] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[  133.104153] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[  133.104323] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  133.104328] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  133.104330] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[  133.104337] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[  133.104339] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[  133.104342] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[  133.104775] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[  133.130460] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  133.152715] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  133.161729] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  133.191579] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  133.195985] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[  133.196007] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[  133.196010] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[  133.196013] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[  133.196175] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  133.196177] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  133.196180] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[  133.203331] [drm:drm_mode_setcrtc], [CRTC:3]
>[  133.203342] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[  133.203346] [drm:intel_crtc_set_config], [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
>[  133.203349] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  133.203353] [drm:drm_mode_debug_printmodeline], Modeline 27:"" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
>[  133.203357] [drm:drm_mode_debug_printmodeline], Modeline 26:"" 0 76300 1366 1414 1446 1578 768 770 775 806 0x0 0x9
>[  133.203359] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
>[  133.203362] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  133.203365] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  133.203369] [drm:connected_sink_compute_bpp], [CONNECTOR:10:eDP-1] checking for sink bpp constrains
>[  133.203371] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[  133.203376] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 76300KHz
>[  133.203379] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[  133.203381] [drm:intel_dp_compute_config], DP link bw required 137340 available 216000
>[  133.203385] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  133.203387] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  133.203389] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[  133.203391] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  133.203394] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  133.203396] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64
>[  133.203398] [drm:intel_dump_pipe_config], requested mode:
>[  133.203402] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 76300 1366 1414 1446 1578 768 770 775 806 0x0 0x9
>[  133.203404] [drm:intel_dump_pipe_config], adjusted mode:
>[  133.203407] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  133.203411] [drm:intel_dump_crtc_timings], crtc timings: 76300 1366 1414 1446 1578 768 770 775 806, type: 0x48 flags: 0x9
>[  133.203413] [drm:intel_dump_pipe_config], port clock: 270000
>[  133.203415] [drm:intel_dump_pipe_config], pipe src size: 1366x768
>[  133.203417] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  133.203419] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  133.203421] [drm:intel_dump_pipe_config], ips: 1
>[  133.203422] [drm:intel_dump_pipe_config], double wide: 0
>[  133.203430] [drm:ironlake_disable_fbc], disabled FBC
>[  133.235993] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  133.236002] [drm:ironlake_edp_backlight_off], 
>[  133.452786] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[  133.452798] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  133.452802] [drm:ironlake_edp_panel_off], Turn eDP power off
>[  133.452807] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[  133.452812] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[  134.225468] [drm:ironlake_wait_panel_status], Wait complete
>[  134.225486] [drm:intel_update_fbc], no output, disabling
>[  134.225518] [drm:ironlake_update_plane], Writing base 03CDF000 00000000 0 0 5632
>[  134.225525] [drm:intel_crtc_mode_set], [ENCODER:9:TMDS-9] set [MODE:0:]
>[  134.225527] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[  134.225530] [drm:ironlake_edp_panel_on], Turn eDP power on
>[  134.225533] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  134.225537] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[  134.225539] [drm:ironlake_wait_panel_status], Wait complete
>[  134.225543] [drm:ironlake_wait_panel_on], Wait for panel power on
>[  134.225547] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
>[  134.438706] [drm:ironlake_wait_panel_status], Wait complete
>[  134.439825] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  134.440271] [drm:intel_dp_start_link_train], clock recovery OK
>[  134.441014] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[  134.498658] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  134.498850] [drm:ironlake_edp_backlight_on], 
>[  134.505324] [drm:intel_panel_enable_backlight], pipe A
>[  134.505332] [drm:intel_panel_actually_set_backlight], set backlight PWM = 937
>[  134.505339] [drm:intel_edp_psr_match_conditions], PSR disable by flag
>[  134.538652] [drm:i915_setup_compression], reserved 22020096 bytes of contiguous stolen space for FBC
>[  134.551971] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[  134.551979] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[  134.551982] [drm:check_encoder_state], [ENCODER:18:TMDS-18]
>[  134.551985] [drm:check_encoder_state], [ENCODER:21:TMDS-21]
>[  134.551987] [drm:check_crtc_state], [CRTC:3]
>[  134.551995] [drm:check_crtc_state], [CRTC:5]
>[  134.551998] [drm:check_crtc_state], [CRTC:7]
>[  134.553032] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  134.553037] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[  134.553041] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[  134.553053] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  134.553057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[  134.553061] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 76300 1366 1414 1446 1578 768 770 775 806 0x48 0x9
>[  134.553064] [drm:drm_mode_debug_printmodeline], Modeline 12:"1366x768" 40 50870 1366 1414 1446 1578 768 770 775 806 0x40 0x9
>[  134.553067] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[  134.553192] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
>[  134.553194] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
>[  134.553196] [drm:intel_dp_detect], [CONNECTOR:19:DP-1]
>[  134.553200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
>[  134.553204] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[  134.553206] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1]
>[  134.553208] [drm:intel_hdmi_detect], [CONNECTOR:20:HDMI-A-1]
>[  134.553374] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  134.553378] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
>[  134.553380] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-1] disconnected
>[  134.553386] [drm:drm_mode_getconnector], [CONNECTOR:22:?]
>[  134.553388] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
>[  134.553390] [drm:intel_dp_detect], [CONNECTOR:22:DP-2]
>[  134.553804] [drm:intel_dp_get_dpcd], DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 8f 00 00
>[  134.579267] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  134.588625] [drm:gen7_enable_fbc], enabled fbc on plane A
>[  134.610742] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  134.640706] [drm:intel_dp_aux_native_read] *ERROR* too many retries, giving up
>[  134.645214] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected
>[  134.645229] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
>[  134.645232] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
>[  134.645235] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
>[  134.645445] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  134.645450] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  134.645453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
>[  136.355101] [drm:intel_crtc_cursor_set], cursor off
>[  164.036091] [drm:i915_gem_open], 
>[  164.125567] [drm:i915_gem_context_create_ioctl], HW context 1 created
>[  164.126522] [drm:i915_gem_context_destroy_ioctl], HW context 1 destroyed
>[  166.304284] fuse init (API version 7.22)
>[  229.551831] [drm:intel_crtc_cursor_set], cursor off
>[  250.205739] [drm:intel_crtc_cursor_set], cursor off
>[  288.307691] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
>[  288.307699] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
>[  288.307700] parport 0x378: You gave this address, but there is probably no parallel port there!
>[  288.307723] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>[  288.413027] lp0: using parport0 (polling).
>[  288.413031] lp0: console ready
>[  288.527378] console [lp0] disabled
>[  288.527384] console [lp0] disabled
>[  288.533322] ------------[ cut here ]------------
>[  288.533334] WARNING: CPU: 1 PID: 9626 at fs/sysfs/group.c:216 sysfs_remove_group+0x99/0xa0()
>[  288.533336] sysfs group ffffffff81ca7a20 not found for kobject 'parport0'
>[  288.533337] Modules linked in: parport_pc(-) fuse xt_LOG xt_recent iptable_nat nf_nat_ipv4 xt_comment ipt_REJECT xt_addrtype bridge stp llc xt_mark iptable_mangle xt_tcpudp xt_CT iptable_raw xt_multiport nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_nat_tftp nf_nat_snmp_basic nf_conntrack_snmp nf_nat_sip nf_nat_pptp nf_nat_proto_gre nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat_amanda ts_kmp nf_conntrack_amanda nf_nat nf_conntrack_sane nf_conntrack_tftp nf_conntrack_sip nf_conntrack_proto_udplite nf_conntrack_proto_sctp nf_conntrack_pptp nf_conntrack_proto_gre nf_conntrack_netlink nfnetlink nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack iptable_filter ip_tables x_tables af_packet bnep rtsx_pci_sdmmc mmc_core rtsx_pci_ms memstick iTCO_wdt
>[  288.533385]  iTCO_vendor_support ppdev hid_generic hp_wmi sparse_keymap intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode joydev wl(PO) serio_raw i2c_i801 lpc_ich rtsx_pci cfg80211 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media btusb bluetooth usblp 6lowpan_iphc rfkill shpchp thermal parport snd_hda_codec_idt snd_hda_codec_hdmi snd_hda_codec_generic tpm_infineon hp_accel lis3lv02d snd_hda_intel input_polldev snd_hda_codec usbhid hid snd_hwdep e1000e snd_pcm ac battery tpm_tis tpm hp_wireless intel_smartconnect mei_me mei snd_timer processor ptp pps_core snd soundcore evdev nvram ehci_pci ehci_hcd xhci_hcd usbcore usb_common
>[  288.533445]  i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video button dm_mirror dm_region_hash dm_log dm_mod binfmt_misc ipv6 autofs4 [last unloaded: lp]
>[  288.533460] CPU: 1 PID: 9626 Comm: rmmod Tainted: P           O 3.14.31-nrj-laptop-1rosa #1
>[  288.533462] Hardware name: Hewlett-Packard HP EliteBook 820 G1/1991, BIOS L71 Ver. 01.30 12/09/2014
>[  288.533465]  0000000000000009 ffff880088f59d20 ffffffff81666bf1 ffff880088f59d68
>[  288.533468]  ffff880088f59d58 ffffffff81068edd 0000000000000000 ffffffff81ca7a20
>[  288.533472]  ffff88008a732810 00007fff3324704d 0000000000000000 ffff880088f59db8
>[  288.533476] Call Trace:
>[  288.533483]  [<ffffffff81666bf1>] dump_stack+0x4d/0x6f
>[  288.533487]  [<ffffffff81068edd>] warn_slowpath_common+0x7d/0xa0
>[  288.533490]  [<ffffffff81068f4c>] warn_slowpath_fmt+0x4c/0x50
>[  288.533494]  [<ffffffff8122a2e8>] ? kernfs_find_and_get_ns+0x48/0x60
>[  288.533497]  [<ffffffff81228e19>] sysfs_remove_group+0x99/0xa0
>[  288.533502]  [<ffffffff814bece3>] dpm_sysfs_remove+0x43/0x50
>[  288.533506]  [<ffffffff814b4875>] device_del+0x45/0x1d0
>[  288.533509]  [<ffffffff814b4a1e>] device_unregister+0x1e/0x70
>[  288.533511]  [<ffffffff814b4aec>] device_destroy+0x3c/0x50
>[  288.533519]  [<ffffffffa0435061>] pp_detach+0x21/0x30 [ppdev]
>[  288.533527]  [<ffffffffa03915ae>] parport_remove_port+0x3e/0x180 [parport]
>[  288.533532]  [<ffffffffa0eadc5a>] parport_pc_unregister_port+0x2a/0x1b0 [parport_pc]
>[  288.533536]  [<ffffffffa0eb1242>] parport_pc_exit+0x75/0xe33 [parport_pc]
>[  288.533540]  [<ffffffff810e48e4>] SyS_delete_module+0x144/0x1e0
>[  288.533544]  [<ffffffff8166e158>] ? page_fault+0x28/0x30
>[  288.533548]  [<ffffffff81675cfd>] system_call_fastpath+0x1a/0x1f
>[  288.533550] ---[ end trace bf97846913c76a72 ]---
>[  288.561207] lp: driver loaded but no devices found
>[  288.589877] ppa: Version 2.07 (for Linux 2.4.x)
>[  288.618645] Uniform Multi-Platform E-IDE driver
>[  288.628683] ide-cd driver 5.00
>[  288.636765] ide-gd driver 1.18
>[  288.665202] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[  288.682494] sd 0:0:0:0: Attached scsi generic sg0 type 0

Actions: View

Attachments on bug 88919: 113046 | 113047 | 113048 | 113049 | 113146 | 114322 | 114323 | 119481 | 119482 | 119483

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.