Attachment 12072 Details for Bug 12825 – dmesg

dmesg

dmesg.txt (text/plain), 18.69 KB, created by David on 2007-10-16 07:06:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David

Created: 2007-10-16 07:06:12 UTC

Size: 18.69 KB

patch

obsolete

>Linux version 2.6.22-gentoo-r8 (root@pc-david) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #1 PREEMPT Sat Sep 29 18:49:20 CEST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Entering add_active_range(0, 0, 262128) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262128
>early_node_map[1] active PFN ranges
>    0:        0 ->   262128
>On node 0 totalpages: 262128
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32497 pages, LIFO batch:7
>DMI 2.2 present.
>ACPI: RSDP 000F6D80, 0014 (r0 XPC   )
>ACPI: RSDT 3FFF3000, 002C (r1 XPC    AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FFF3040, 0074 (r1 XPC    AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FFF30C0, 4137 (r1 XPC        SN45     1000 MSFT  100000E)
>ACPI: FACS 3FFF0000, 0040
>ACPI: APIC 3FFF7200, 006E (r1 XPC    AWRDACPI 42302E31 AWRD        0)
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:8 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Built 1 zonelists.  Total pages: 260081
>Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda11 udev video=nvidiafb:1024x768-32@85 splash=silent,theme:gentoo CONSOLE=/dev/tty1 quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1603.690 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1027600k/1048512k available (2373k kernel code, 20168k reserved, 747k data, 212k init, 131008k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffaa000 - 0xfffff000   ( 340 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0410000 - 0xc0445000   ( 212 kB)
>      .data : 0xc035157c - 0xc040c424   ( 747 kB)
>      .text : 0xc0100000 - 0xc035157c   (2373 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3209.17 BogoMIPS (lpj=16045852)
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 64K (64 bytes/line)
>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>CPU: AMD Duron(tm) processor stepping 01
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb790, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: nForce2 C1 Halt Disconnect fixup
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs *18)
>ACPI: PCI Interrupt Link [APC4] (IRQs *19)
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:00: ioport range 0x4000-0x407f has been reserved
>pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
>pnp: 00:00: ioport range 0x4400-0x447f has been reserved
>pnp: 00:00: ioport range 0x4480-0x44ff has been reserved
>pnp: 00:00: ioport range 0x4200-0x427f has been reserved
>pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
>pnp: 00:01: ioport range 0x5000-0x503f has been reserved
>pnp: 00:01: ioport range 0x5100-0x513f has been reserved
>pnp: 00:02: iomem range 0xd5800-0xd7fff has been reserved
>pnp: 00:02: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:02: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:02: iomem range 0xfc000-0xfffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:08.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: eb000000-ebffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: e9000000-eaffffff
>  PREFETCH window: e4000000-e7ffffff
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 7578k freed
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>audit(1192543924.009:1): initialized
>highmem bounce pool size: 64 pages
>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
>io scheduler noop registered
>io scheduler anticipatory registered (default)
>io scheduler deadline registered
>io scheduler cfq registered
>Boot video device is 0000:03:00.0
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 16
>nvidiafb: Device ID: 10de0181 
>nvidiafb: CRTC0 analog found
>nvidiafb: CRTC1 analog not found
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>nvidiafb: EDID found from BUS2
>nvidiafb: CRTC 0 appears to have a CRT attached
>nvidiafb: Using CRT on CRTC 0
>nvidiafb: MTRR set to ON
>Console: switching to colour frame buffer device 128x48
>fbsplash: console 0 using theme 'gentoo'
>fbsplash: switched splash state to 'on' on console 0
>nvidiafb: PCI nVidia NV18 framebuffer (64MB @ 0xE4000000)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>loop: module loaded
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE2: IDE controller at PCI slot 0000:00:09.0
>NFORCE2: chipset revision 162
>NFORCE2: not 100% native mode: will probe irqs later
>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: Maxtor 6L200R0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 398297088 sectors (203928 MB) w/16384KiB Cache, CHS=24792/255/63, UDMA(133)
>hda: cache flushes supported
> hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
>hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>TCP cubic registered
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI Shortcut mode
>Freeing unused kernel memory: 212k freed
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.2: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: irq 17, io mem 0xec083000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>Initializing USB Mass Storage driver...
>usb 1-4: new high speed USB device using ehci_hcd and address 4
>usb 1-4: configuration #1 chosen from 1 choice
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 18, io mem 0xec087000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.1: irq 19, io mem 0xec082000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-2: new low speed USB device using ohci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: Logitech USB Receiver as /class/input/input1
>input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2
>input: Logitech USB Receiver as /class/input/input2
>input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-2
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>sl811: driver sl811-hcd, 19 May 2005
>ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 22 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[ec084000-ec0847ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ohci1394: fw-host0: SelfID received outside of bus reset sequence
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00301b301bb116da]
>scsi 0:0:0:0: Direct-Access     Samsung  Mighty Drive     PMAP PQ: 0 ANSI: 0 CCS
>sd 0:0:0:0: [sda] 1006592 512-byte hardware sectors (515 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] 1006592 512-byte hardware sectors (515 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI removable disk
>usb-storage: device scan complete
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>Real Time Clock Driver v1.12ac
>input: PC Speaker as /class/input/input3
>Linux agpgart interface v0.102 (c) Dave Jones
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>intel8x0_measure_ac97_clock: measured 55354 usecs
>intel8x0: clocking to 47446
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart: AGP aperture is 64M @ 0xe0000000
>Linux video capture interface: v2.00
>i2c-adapter i2c-3: nForce2 SMBus adapter at 0x5000
>i2c-adapter i2c-4: nForce2 SMBus adapter at 0x5100
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 20 (level, high) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>bttv: driver version 0.9.17 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>usbcore: registered new interface driver hci_usb
>eth0: forcedeth.c: subsystem: 01297:f541 bound to 0000:00:04.0
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:06.1[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 20
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 20
>bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 20, latency: 32, mmio: 0xeb000000
>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
>bttv0: using: Hauppauge (bt878) [card=10,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
>tveeprom 5-0050: Hauppauge model 44914, rev D147, serial# 6954337
>tveeprom 5-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
>tveeprom 5-0050: TV standards PAL(B/G) (eeprom 0x04)
>tveeprom 5-0050: audio processor is None (idx 0)
>tveeprom 5-0050: has radio
>bttv0: Hauppauge eeprom indicates model#44914
>bttv0: using tuner=28
>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>bttv0: i2c: checking for TDA9887 @ 0x86... not found
>tuner 5-0061: chip found @ 0xc2 (bt878 #0 [sw])
>tuner 5-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
>tuner 5-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bttv0: PLL: 28636363 => 35468950 .. ok
>EXT3 FS on hda11, internal journal
>it87: Found IT8712F chip at 0x290, revision 5
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>Adding 987956k swap on /dev/hda10.  Priority:-1 extents:1 across:987956k
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>[drm] Initialized drm 1.1.0 20060810
>[drm] Detected an NV17 generation card (0x018100a2)
>[drm] Initialized nouveau 0.0.10 20060213 on minor 0
>[drm] Used old pci detect: framebuffer loaded
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V3 device at 0000:03:00.0 into 4x mode
>[drm] Allocating FIFO number 0
>[drm] nouveau_fifo_alloc: initialised FIFO 0
>[drm] Allocating FIFO number 1
>[drm] nouveau_fifo_alloc: initialised FIFO 1

Actions: View

Attachments on bug 12825: 12070 | 12071 | 12072 | 12073 | 13801 | 14124 | 16218

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.