Attachment 122698 Details for Bug 94813 – kernel log w drm.debug=0x6

kernel log w drm.debug=0x6

dmesg.out-1 (text/plain), 100.36 KB, created by Egbert Eich on 2016-04-04 12:03:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Egbert Eich

Created: 2016-04-04 12:03:47 UTC

Size: 100.36 KB

patch

obsolete

>[    0.000000] Linux version 4.5.0-2-default (geeko@buildhost) (gcc version 5.3.1 20151207 [gcc-5-branch revision 231355] (SUSE Linux) ) #1 SMP PREEMPT Thu Mar 24 12:22:16 UTC 2016 (ece3ff2)
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-2-default root=UUID=9426b6f8-7993-4a2e-a7f6-01483692c6bf resume=/dev/disk/by-label/SWAP splash=silent quiet showopts drm.debug=0x6
>[    0.000000] x86/fpu: Legacy x87 FPU detected.
>[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000077cfdfff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000077cfe000-0x000000007860dfff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007860e000-0x000000007870dfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007870e000-0x000000007874dfff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007874e000-0x0000000079365fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000079366000-0x0000000079c65fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x0000000079c66000-0x0000000079ffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] e820: update [mem 0x74bf2018-0x74c02057] usable ==> usable
>[    0.000000] extended physical RAM map:
>[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
>[    0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
>[    0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable
>[    0.000000] reserve setup_data: [mem 0x0000000000086000-0x000000000009ffff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
>[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000200fffff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000020100000-0x0000000074bf2017] usable
>[    0.000000] reserve setup_data: [mem 0x0000000074bf2018-0x0000000074c02057] usable
>[    0.000000] reserve setup_data: [mem 0x0000000074c02058-0x0000000077cfdfff] usable
>[    0.000000] reserve setup_data: [mem 0x0000000077cfe000-0x000000007860dfff] reserved
>[    0.000000] reserve setup_data: [mem 0x000000007860e000-0x000000007870dfff] ACPI NVS
>[    0.000000] reserve setup_data: [mem 0x000000007870e000-0x000000007874dfff] ACPI data
>[    0.000000] reserve setup_data: [mem 0x000000007874e000-0x0000000079365fff] usable
>[    0.000000] reserve setup_data: [mem 0x0000000079366000-0x0000000079c65fff] ACPI NVS
>[    0.000000] reserve setup_data: [mem 0x0000000079c66000-0x0000000079ffffff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027fffffff] usable
>[    0.000000] efi: EFI v2.31 by INSYDE Corp.
>[    0.000000] efi:  ACPI 2.0=0x7874d014  ESRT=0x77e3b918  SMBIOS=0x7860d000 
>[    0.000000] esrt: Reserving ESRT space from 0x0000000077e3b918 to 0x0000000077e3b950.
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: Acer Aspire E5-511/Aspire E5-511, BIOS V1.03 05/16/2014
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
>[    0.000000]   1 base 0FFB80000 mask FFFF80000 write-protect
>[    0.000000]   2 base 000000000 mask F80000000 write-back
>[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
>[    0.000000]   4 base 07B000000 mask FFF000000 uncachable
>[    0.000000]   5 base 07AE00000 mask FFFE00000 uncachable
>[    0.000000]   6 base 100000000 mask F00000000 write-back
>[    0.000000]   7 base 200000000 mask F80000000 write-back
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000080000] 80000 size 24576
>[    0.000000] BRK [0x0224a000, 0x0224afff] PGTABLE
>[    0.000000] BRK [0x0224b000, 0x0224bfff] PGTABLE
>[    0.000000] BRK [0x0224c000, 0x0224cfff] PGTABLE
>[    0.000000] BRK [0x0224d000, 0x0224dfff] PGTABLE
>[    0.000000] BRK [0x0224e000, 0x0224efff] PGTABLE
>[    0.000000] BRK [0x0224f000, 0x0224ffff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x3f708000-0x3fffafff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x000000007874D014 000024 (v02 ACRSYS)
>[    0.000000] ACPI: XSDT 0x000000007874D120 00009C (v01 ACRSYS ACRPRDCT 00000003      01000013)
>[    0.000000] ACPI: FACP 0x0000000078746000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
>[    0.000000] ACPI: DSDT 0x0000000078735000 00CE05 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
>[    0.000000] ACPI: FACS 0x00000000786C6000 000040
>[    0.000000] ACPI: UEFI 0x000000007874C000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
>[    0.000000] ACPI: MSDM 0x000000007874B000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
>[    0.000000] ACPI: UEFI 0x000000007874A000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
>[    0.000000] ACPI: SSDT 0x0000000078747000 002F1D (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
>[    0.000000] ACPI: HPET 0x0000000078745000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>[    0.000000] ACPI: LPIT 0x0000000078744000 000104 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>[    0.000000] ACPI: APIC 0x0000000078743000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
>[    0.000000] ACPI: MCFG 0x0000000078742000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
>[    0.000000] ACPI: SSDT 0x0000000078733000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
>[    0.000000] ACPI: SSDT 0x0000000078732000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
>[    0.000000] ACPI: SSDT 0x0000000078731000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
>[    0.000000] ACPI: SSDT 0x0000000078730000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
>[    0.000000] ACPI: FPDT 0x000000007872F000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
>[    0.000000] ACPI: BGRT 0x0000000078734000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x27ffe5000-0x27fff6fff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000006efff]
>[    0.000000]   node   0: [mem 0x0000000000070000-0x0000000000085fff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
>[    0.000000]   node   0: [mem 0x0000000020100000-0x0000000077cfdfff]
>[    0.000000]   node   0: [mem 0x000000007874e000-0x0000000079365fff]
>[    0.000000]   node   0: [mem 0x0000000079c66000-0x0000000079ffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
>[    0.000000] On node 0 totalpages: 2067252
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3972 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7663 pages used for memmap
>[    0.000000]   DMA32 zone: 490416 pages, LIFO batch:31
>[    0.000000]   Normal zone: 24576 pages used for memmap
>[    0.000000]   Normal zone: 1572864 pages, LIFO batch:31
>[    0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
>[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
>[    0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x74bf2000-0x74bf2fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x74c02000-0x74c02fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x77cfe000-0x7860dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7860e000-0x7870dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7870e000-0x7874dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79366000-0x79c65fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7a000000-0x7affffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7effffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7f000000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffb7ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
>[    0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff88027fc00000 s99096 r8192 d31976 u524288
>[    0.000000] pcpu-alloc: s99096 r8192 d31976 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2034928
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-2-default root=UUID=9426b6f8-7993-4a2e-a7f6-01483692c6bf resume=/dev/disk/by-label/SWAP splash=silent quiet showopts drm.debug=0x6
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Memory: 3938484K/8269008K available (6978K kernel code, 1179K rwdata, 5152K rodata, 1628K init, 1544K bss, 268680K reserved, 0K cma-reserved)
>[    0.000000] Preemptible hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
>[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] Maximum core-clock to bus-clock ratio: 0x1a
>[    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
>[    0.000000] TSC runs at 2163200 KHz
>[    0.000000] lapic_timer_frequency = 332800
>[    0.000000] tsc: Detected 2163.200 MHz processor
>[    0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4326.40 BogoMIPS (lpj=8652800)
>[    0.000042] pid_max: default: 32768 minimum: 301
>[    0.000070] ACPI: Core revision 20160108
>[    0.042434] ACPI: 6 ACPI AML tables successfully acquired and loaded
>
>[    0.044139] Security Framework initialized
>[    0.044153] AppArmor: AppArmor initialized
>[    0.045106] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.048617] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.050170] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.050192] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.050709] CPU: Physical Processor ID: 0
>[    0.050714] CPU: Processor Core ID: 0
>[    0.050720] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.050722] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.050732] mce: CPU supports 6 MCE banks
>[    0.050742] CPU0: Thermal monitoring handled by SMI
>[    0.050747] process: using mwait in idle threads
>[    0.050753] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
>[    0.050756] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
>[    0.051072] Freeing SMP alternatives memory: 28K (ffffffff820bf000 - ffffffff820c6000)
>[    0.073229] ftrace: allocating 26991 entries in 106 pages
>[    0.088419] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.128128] TSC deadline timer enabled
>[    0.128134] smpboot: CPU0: Intel(R) Pentium(R) CPU  N3530  @ 2.16GHz (family: 0x6, model: 0x37, stepping: 0x8)
>[    0.128173] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
>[    0.128188] ... version:                3
>[    0.128190] ... bit width:              40
>[    0.128192] ... generic registers:      2
>[    0.128194] ... value mask:             000000ffffffffff
>[    0.128196] ... max period:             000000ffffffffff
>[    0.128198] ... fixed-purpose events:   3
>[    0.128200] ... event mask:             0000000700000003
>[    0.164243] x86: Booting SMP configuration:
>[    0.164249] .... node  #0, CPUs:      #1
>[    0.164365] CPU1: Thermal monitoring handled by SMI
>[    0.166589] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.176265]  #2
>[    0.176348] CPU2: Thermal monitoring handled by SMI
>[    0.188274]  #3
>[    0.188357] CPU3: Thermal monitoring handled by SMI
>[    0.190426] x86: Booted up 1 node, 4 CPUs
>[    0.190432] smpboot: Total of 4 processors activated (17305.60 BogoMIPS)
>[    0.235074] node 0 initialised, 1015461 pages in 44ms
>[    0.235300] devtmpfs: initialized
>[    0.243477] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
>[    0.243482] PM: Registering ACPI NVS region [mem 0x7860e000-0x7870dfff] (1048576 bytes)
>[    0.243538] PM: Registering ACPI NVS region [mem 0x79366000-0x79c65fff] (9437184 bytes)
>[    0.244178] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.244327] pinctrl core: initialized pinctrl subsystem
>[    0.244388] RTC time: 11:16:29, date: 04/04/16
>[    0.244671] NET: Registered protocol family 16
>[    0.256329] cpuidle: using governor ladder
>[    0.268336] cpuidle: using governor menu
>[    0.268496] ACPI: bus type PCI registered
>[    0.268500] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.268654] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.268659] PCI: not using MMCONFIG
>[    0.268662] PCI: Using configuration type 1 for base access
>[    0.280597] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.281233] ACPI: Added _OSI(Module Device)
>[    0.281237] ACPI: Added _OSI(Processor Device)
>[    0.281239] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.281242] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.299728] ACPI: Dynamic OEM Table Load:
>[    0.299743] ACPI: SSDT 0xFFFF88017FCA6800 00045B (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
>[    0.301286] ACPI: Dynamic OEM Table Load:
>[    0.301297] ACPI: SSDT 0xFFFF88017FCA6000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
>[    0.303724] ACPI: Dynamic OEM Table Load:
>[    0.303735] ACPI: SSDT 0xFFFF88017EEE1000 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
>[    0.305156] ACPI: Dynamic OEM Table Load:
>[    0.305166] ACPI: SSDT 0xFFFF88017EEDD040 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
>[    0.309084] ACPI : EC: EC started
>[    0.309456] ACPI: Interpreter enabled
>[    0.309502] ACPI: (supports S0 S3 S4 S5)
>[    0.309506] ACPI: Using IOAPIC for interrupt routing
>[    0.309595] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.311063] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
>[    0.311081] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.426728] ACPI: Power Resource [USBC] (on)
>[    0.435219] ACPI: Power Resource [PLPE] (on)
>[    0.435804] ACPI: Power Resource [PLPE] (on)
>[    0.443954] ACPI: Power Resource [CLK0] (on)
>[    0.444071] ACPI: Power Resource [CLK1] (on)
>[    0.517826] ACPI: Power Resource [FN00] (off)
>[    0.519437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.519450] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.726972] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
>[    0.726975] _OSC request data: 1 1f 0
>[    0.726983] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.727014] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.728052] PCI host bridge to bus 0000:00
>[    0.728059] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
>[    0.728063] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
>[    0.728067] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
>[    0.728071] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.728075] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.728078] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
>[    0.728082] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
>[    0.728086] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
>[    0.728090] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.728103] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
>[    0.728341] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
>[    0.728356] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
>[    0.728369] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
>[    0.728380] pci 0000:00:02.0: reg 0x20: [io  0x2050-0x2057]
>[    0.728618] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
>[    0.728638] pci 0000:00:13.0: reg 0x10: [io  0x2048-0x204f]
>[    0.728648] pci 0000:00:13.0: reg 0x14: [io  0x205c-0x205f]
>[    0.728659] pci 0000:00:13.0: reg 0x18: [io  0x2040-0x2047]
>[    0.728669] pci 0000:00:13.0: reg 0x1c: [io  0x2058-0x205b]
>[    0.728679] pci 0000:00:13.0: reg 0x20: [io  0x2020-0x203f]
>[    0.728690] pci 0000:00:13.0: reg 0x24: [mem 0x9081f000-0x9081f7ff]
>[    0.728741] pci 0000:00:13.0: PME# supported from D3hot
>[    0.728942] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
>[    0.728962] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
>[    0.729028] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.729204] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.729301] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
>[    0.729326] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
>[    0.729341] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
>[    0.729449] pci 0000:00:1a.0: PME# supported from D0 D3hot
>[    0.729654] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
>[    0.729677] pci 0000:00:1b.0: reg 0x10: [mem 0x90810000-0x90813fff 64bit]
>[    0.729755] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.729954] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
>[    0.730022] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.730150] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.730239] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
>[    0.730306] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.730438] pci 0000:00:1c.1: System wakeup disabled by ACPI
>[    0.730530] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
>[    0.730795] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
>[    0.730831] pci 0000:00:1f.3: reg 0x10: [mem 0x90819000-0x9081901f]
>[    0.730913] pci 0000:00:1f.3: reg 0x20: [io  0x2000-0x201f]
>[    0.731301] pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
>[    0.731324] pci 0000:01:00.0: reg 0x10: [mem 0x90505000-0x90505fff]
>[    0.731387] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
>[    0.731479] pci 0000:01:00.0: supports D1 D2
>[    0.731483] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
>[    0.731563] pci 0000:01:00.0: System wakeup disabled by ACPI
>[    0.731656] pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
>[    0.731679] pci 0000:01:00.1: reg 0x10: [io  0x1000-0x10ff]
>[    0.731708] pci 0000:01:00.1: reg 0x18: [mem 0x90504000-0x90504fff 64bit]
>[    0.731727] pci 0000:01:00.1: reg 0x20: [mem 0x90500000-0x90503fff 64bit]
>[    0.731824] pci 0000:01:00.1: supports D1 D2
>[    0.731828] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.738874] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.738880] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.738885] pci 0000:00:1c.0:   bridge window [mem 0x90500000-0x905fffff]
>[    0.739001] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
>[    0.739029] pci 0000:02:00.0: reg 0x10: [mem 0x90400000-0x9047ffff 64bit]
>[    0.739081] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
>[    0.739158] pci 0000:02:00.0: supports D1 D2
>[    0.739162] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.739231] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    0.746873] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.746881] pci 0000:00:1c.1:   bridge window [mem 0x90400000-0x904fffff]
>[    0.800777] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.801024] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.801268] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.801512] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.801756] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.801999] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.802244] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.802488] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.806202] ACPI: Enabled 4 GPEs in block 00 to 3F
>[    0.806345] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
>[    0.806584] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.806589] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.806596] vgaarb: loaded
>[    0.806599] vgaarb: bridge control possible 0000:00:02.0
>[    0.806854] SCSI subsystem initialized
>[    0.806961] libata version 3.00 loaded.
>[    0.807219] PCI: Using ACPI for IRQ routing
>[    0.808641] PCI: pci_cache_line_size set to 64 bytes
>[    0.808690] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
>[    0.808694] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
>[    0.808697] e820: reserve RAM buffer [mem 0x74bf2018-0x77ffffff]
>[    0.808700] e820: reserve RAM buffer [mem 0x77cfe000-0x77ffffff]
>[    0.808703] e820: reserve RAM buffer [mem 0x79366000-0x7bffffff]
>[    0.808706] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
>[    0.808941] NetLabel: Initializing
>[    0.808944] NetLabel:  domain hash size = 128
>[    0.808946] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.808970] NetLabel:  unlabeled traffic allowed by default
>[    0.809091] clocksource: Switched to clocksource refined-jiffies
>[    0.823655] VFS: Disk quotas dquot_6.6.0
>[    0.823698] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.823882] AppArmor: AppArmor Filesystem Enabled
>[    0.823983] pnp: PnP ACPI init
>[    0.824110] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.875071] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.0 BAR 13 [io  0x1000-0x1fff]
>[    0.875144] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.875149] system 00:01: [io  0x0400-0x047f] has been reserved
>[    0.875153] system 00:01: [io  0x0500-0x05fe] has been reserved
>[    0.875158] system 00:01: [io  0x0600-0x061f] has been reserved
>[    0.875163] system 00:01: [io  0xfd60-0xfd63] has been reserved
>[    0.875168] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.875175] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.875394] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
>[    0.876590] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.876596] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
>[    0.876601] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
>[    0.876605] system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved
>[    0.876609] system 00:03: [mem 0xfed0c000-0xfed0ffff] has been reserved
>[    0.876613] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
>[    0.876617] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
>[    0.876622] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.876626] system 00:03: [mem 0xfef00000-0xfeffffff] has been reserved
>[    0.876632] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.878828] pnp: PnP ACPI: found 4 devices
>[    0.887696] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.887726] clocksource: Switched to clocksource acpi_pm
>[    0.887742] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
>[    0.887748] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
>[    0.887777] pci 0000:01:00.0: BAR 6: assigned [mem 0x90510000-0x9051ffff pref]
>[    0.887782] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.887787] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.887793] pci 0000:00:1c.0:   bridge window [mem 0x90500000-0x905fffff]
>[    0.887803] pci 0000:02:00.0: BAR 6: assigned [mem 0x90480000-0x9048ffff pref]
>[    0.887807] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.887813] pci 0000:00:1c.1:   bridge window [mem 0x90400000-0x904fffff]
>[    0.887822] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
>[    0.887826] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
>[    0.887830] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
>[    0.887833] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
>[    0.887837] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
>[    0.887841] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
>[    0.887844] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
>[    0.887848] pci_bus 0000:00: resource 11 [mem 0x80000000-0x908ffffe window]
>[    0.887851] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    0.887855] pci_bus 0000:01: resource 1 [mem 0x90500000-0x905fffff]
>[    0.887859] pci_bus 0000:02: resource 1 [mem 0x90400000-0x904fffff]
>[    0.888002] NET: Registered protocol family 2
>[    0.888404] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.888678] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.888981] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.889073] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.889146] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.889375] NET: Registered protocol family 1
>[    0.889407] pci 0000:00:02.0: Video device with shadowed ROM
>[    0.889821] PCI: CLS 64 bytes, default 64
>[    0.889926] Unpacking initramfs...
>[    2.316601] Freeing initrd memory: 9164K (ffff88003f708000 - ffff88003fffb000)
>[    2.316620] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    2.316625] software IO TLB [mem 0x70bf2000-0x74bf2000] (64MB) mapped at [ffff880070bf2000-ffff880074bf1fff]
>[    2.316886] Scanning for low memory corruption every 60 seconds
>[    2.317580] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    2.317653] audit: initializing netlink subsys (disabled)
>[    2.317687] audit: type=2000 audit(1459768591.295:1): initialized
>[    2.318538] zbud: loaded
>[    2.319159] Key type big_key registered
>[    2.320028] Key type asymmetric registered
>[    2.320035] Asymmetric key parser 'x509' registered
>[    2.320089] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    2.320174] io scheduler noop registered
>[    2.320180] io scheduler deadline registered
>[    2.320213] io scheduler cfq registered (default)
>[    2.320816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    2.320831] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    2.320886] efifb: probing for efifb
>[    2.320912] efifb: framebuffer at 0x80000000, mapped to 0xffffc90001000000, using 4128k, total 4128k
>[    2.320915] efifb: mode is 1366x768x32, linelength=5504, pages=1
>[    2.320917] efifb: scrolling: redraw
>[    2.320920] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    2.327191] Console: switching to colour frame buffer device 170x48
>[    2.333124] fb0: EFI VGA frame buffer device
>[    2.333143] intel_idle: MWAIT substates: 0x33000020
>[    2.333146] intel_idle: v0.4 model 0x37
>[    2.333149] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    2.338267] GHES: HEST is not enabled!
>[    2.338426] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
>[    2.358581] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    2.362840] hpet: number irqs doesn't agree with number of timers
>[    2.362970] Non-volatile memory driver v1.3
>[    2.363059] Linux agpgart interface v0.103
>[    2.363902] ahci 0000:00:13.0: version 3.0
>[    2.364120] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
>[    2.374289] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>[    2.374295] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso 
>[    2.374959] scsi host0: ahci
>[    2.375272] scsi host1: ahci
>[    2.375379] ata1: SATA max UDMA/133 abar m2048@0x9081f000 port 0x9081f100 irq 87
>[    2.375383] ata2: SATA max UDMA/133 abar m2048@0x9081f000 port 0x9081f180 irq 87
>[    2.375496] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    2.375499] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    2.379391] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.379943] mousedev: PS/2 mouse device common for all mice
>[    2.380826] rtc_cmos 00:00: RTC can wake from S4
>[    2.381065] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
>[    2.381095] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
>[    2.381116] Intel P-state driver initializing.
>[    2.381836] ledtrig-cpu: registered to indicate activity on CPUs
>[    2.381862] EFI Variables Facility v0.08 2004-May-17
>[    2.393006] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    2.401041] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.402323] NET: Registered protocol family 10
>[    2.404708] microcode: CPU0 sig=0x30678, pf=0x8, revision=0x815
>[    2.404875] microcode: CPU1 sig=0x30678, pf=0x8, revision=0x815
>[    2.404965] microcode: CPU2 sig=0x30678, pf=0x8, revision=0x815
>[    2.404979] microcode: CPU3 sig=0x30678, pf=0x8, revision=0x815
>[    2.405335] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    2.406205] registered taskstats version 1
>[    2.406272] zswap: loaded using pool lzo/zbud
>[    2.423952] Key type encrypted registered
>[    2.424001] AppArmor: AppArmor sha1 policy hashing enabled
>[    2.425854]   Magic number: 12:172:276
>[    2.425947] tty tty13: hash matches
>[    2.426006] acpi LPE0F28:00: hash matches
>[    2.426469] rtc_cmos 00:00: setting system clock to 2016-04-04 11:16:31 UTC (1459768591)
>[    2.427021] PM: Checking hibernation image partition /dev/disk/by-label/SWAP
>[    2.686707] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.687600] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.689316] ata1.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
>[    2.689336] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    2.689690] ata2.00: ATAPI: HL-DT-ST DVDRAM GUA0N, 1.00, max UDMA/133
>[    2.691607] ata1.00: configured for UDMA/133
>[    2.694850] ata2.00: configured for UDMA/133
>[    2.697828] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
>[    2.720424] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    2.720447] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[    2.720874] sd 0:0:0:0: [sda] Write Protect is off
>[    2.720898] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.721078] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.731539] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUA0N     1.00 PQ: 0 ANSI: 5
>[    2.809972]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12
>[    2.820541] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.820989] PM: Hibernation image not present or could not be loaded.
>[    2.833108] Freeing unused kernel memory: 1628K (ffffffff81f28000 - ffffffff820bf000)
>[    2.833126] Write protecting the kernel read-only data: 14336k
>[    2.838320] Freeing unused kernel memory: 1200K (ffff8800016d4000 - ffff880001800000)
>[    2.849237] Freeing unused kernel memory: 992K (ffff880001d08000 - ffff880001e00000)
>[    2.864757] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
>[    2.897131] random: systemd urandom read with 14 bits of entropy available
>[    2.906868] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
>[    2.907312] systemd[1]: Detected architecture x86-64.
>[    2.907319] systemd[1]: Running in initial RAM disk.
>[    2.907370] systemd[1]: Set hostname to <ltfctum>.
>[    3.188188] systemd[1]: Created slice System Slice.
>[    3.188310] systemd[1]: Reached target Slices.
>[    3.188363] systemd[1]: Reached target Timers.
>[    3.188697] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
>[    3.188852] systemd[1]: Listening on Journal Socket (/dev/log).
>[    3.188903] systemd[1]: Reached target Swap.
>[    3.189021] systemd[1]: Listening on Journal Socket.
>[    3.204502] systemd[1]: Starting Load Kernel Modules...
>[    3.206093] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
>[    3.212528] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    3.212707] scsi 1:0:0:0: Attached scsi generic sg1 type 5
>[    3.212715] systemd[1]: Starting Setup Virtual Console...
>[    3.216456] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[    3.216637] systemd[1]: Listening on udev Kernel Socket.
>[    3.218820] systemd[1]: Starting dracut cmdline hook...
>[    3.219017] systemd[1]: Listening on udev Control Socket.
>[    3.219367] systemd[1]: Listening on Journal Audit Socket.
>[    3.220944] systemd[1]: Starting Journal Service...
>[    3.221004] systemd[1]: Reached target Sockets.
>[    3.232848] systemd[1]: Started Load Kernel Modules.
>[    3.232918] audit: type=1130 audit(1459761392.301:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.233373] systemd[1]: Started Create list of required static device nodes for the current kernel.
>[    3.233414] audit: type=1130 audit(1459761392.301:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.255631] systemd[1]: Started Setup Virtual Console.
>[    3.255766] audit: type=1130 audit(1459761392.325:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.315665] tsc: Refined TSC clocksource calibration: 2166.672 MHz
>[    3.315672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f3b372a08d, max_idle_ns: 440795226328 ns
>[    3.336460] systemd[1]: Starting Create Static Device Nodes in /dev...
>[    3.337849] systemd[1]: Starting Apply Kernel Variables...
>[    3.345954] systemd[1]: Started Create Static Device Nodes in /dev.
>[    3.346130] audit: type=1130 audit(1459761392.413:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.349903] systemd[1]: Started Journal Service.
>[    3.350136] audit: type=1130 audit(1459761392.417:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.369491] audit: type=1130 audit(1459761392.437:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.378377] audit: type=1130 audit(1459761392.445:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.382246] audit: type=1130 audit(1459761392.449:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.415970] audit: type=1130 audit(1459761392.485:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.516921] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    3.518364] ACPI: Lid Switch [LID0]
>[    3.518738] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    3.519020] ACPI: Power Button [PWRB]
>[    3.519357] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    3.519601] ACPI: Sleep Button [SLPB]
>[    3.520069] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    3.520221] ACPI: Power Button [PWRF]
>[    3.527663] sdhci: Secure Digital Host Controller Interface driver
>[    3.527673] sdhci: Copyright(c) Pierre Ossman
>[    3.591301] [drm] Initialized drm 1.1.0 20060810
>[    3.604638] ACPI: bus type USB registered
>[    3.604694] usbcore: registered new interface driver usbfs
>[    3.604717] usbcore: registered new interface driver hub
>[    3.604774] usbcore: registered new device driver usb
>[    3.606500] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 88
>[    3.606969] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    3.606984] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    3.608313] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    3.608330] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    3.608569] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    3.608573] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.608576] usb usb1: Product: xHCI Host Controller
>[    3.608579] usb usb1: Manufacturer: Linux 4.5.0-2-default xhci-hcd
>[    3.608581] usb usb1: SerialNumber: 0000:00:14.0
>[    3.609869] hub 1-0:1.0: USB hub found
>[    3.609987] hub 1-0:1.0: 6 ports detected
>[    3.611092] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    3.611101] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    3.611185] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    3.611189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.611192] usb usb2: Product: xHCI Host Controller
>[    3.611194] usb usb2: Manufacturer: Linux 4.5.0-2-default xhci-hcd
>[    3.611197] usb usb2: SerialNumber: 0000:00:14.0
>[    3.611453] hub 2-0:1.0: USB hub found
>[    3.611469] hub 2-0:1.0: 1 port detected
>[    3.612992] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    3.613000] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    3.613317] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    3.619209] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0f31 rev=0x0e flags=is_mobile,need_gfx_hws,is_valleyview,has_hotplug,
>[    3.619235] [drm:intel_detect_pch] No PCH found.
>[    3.619376] [drm] Memory usable by graphics device = 2048M
>[    3.619379] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    3.619382] [drm:i915_gem_gtt_init] GTT stolen size = 64M
>[    3.619384] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    3.619387] checking generic (80000000 408000) vs hw (80000000 10000000)
>[    3.619389] fb: switching to inteldrmfb from EFI VGA
>[    3.619439] Console: switching to colour dummy device 80x25
>[    3.619558] [drm] Replacing VGA console driver
>[    3.619629] [drm:intel_opregion_setup] graphic opregion physical addr: 0x786be018
>[    3.619642] [drm:intel_opregion_setup] Public ACPI methods supported
>[    3.619644] [drm:intel_opregion_setup] ASLE supported
>[    3.619647] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    3.619820] [drm:intel_device_info_runtime_init] slice total: 0
>[    3.619823] [drm:intel_device_info_runtime_init] subslice total: 0
>[    3.619825] [drm:intel_device_info_runtime_init] subslice per slice: 0
>[    3.619827] [drm:intel_device_info_runtime_init] EU total: 0
>[    3.619829] [drm:intel_device_info_runtime_init] EU per subslice: 0
>[    3.619831] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    3.619833] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    3.619835] [drm:intel_device_info_runtime_init] has EU power gating: n
>[    3.619837] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    3.619839] [drm] Driver supports precise vblank timestamp query.
>[    3.619841] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz
>[    3.619844] [drm:intel_bios_init] VBT signature "$VBT VALLEYVIEW    ", BDB version 179
>[    3.619847] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    3.619850] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    3.619852] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    3.619856] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    3.619860] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    3.619862] [drm:parse_lfp_panel_data] VBT initial LVDS value 0
>[    3.619865] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    3.619867] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    3.619872] [drm:parse_driver_features] DRRS State Enabled:1
>[    3.619897] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    3.619913] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 65536K
>[    3.619951] [drm:intel_power_well_enable] enabling always-on
>[    3.619953] [drm:intel_power_well_enable] enabling display
>[    3.619967] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[    3.619974] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[    3.619981] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[    3.619988] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[    3.619993] [drm:intel_power_well_enable] enabling dpio-common
>[    3.623065] [drm:intel_modeset_init] 2 display pipes available.
>[    3.623147] [drm:intel_update_czclk] CZ clock rate: 333333 kHz
>[    3.623167] [drm:intel_update_cdclk] Current CD clock rate: 333333 kHz
>[    3.623170] [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
>[    3.623172] [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
>[    3.623180] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    3.623639] [drm:intel_crt_reset] crt adpa set to 0xf40000
>[    3.623768] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    3.623857] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    3.623922] [drm:intel_dp_init_connector] Adding eDP connector on port C
>[    3.624001] [drm:vlv_initial_power_sequencer_setup] initial power sequencer for port C: pipe A
>[    3.624010] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    3.624013] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    3.624015] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    3.624017] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    3.624024] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[    3.624027] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-eDP-1
>[    3.624078] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[    3.624162] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d
>[    3.624999] [drm:intel_dp_get_dpcd] DPCD: 11 0a 81 01 00 00 01 00 02 00 00 00 00 0b 00
>[    3.626396] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source no, sink no
>[    3.626764] [drm:intel_dp_print_rates] source rates: 162000, 270000
>[    3.626768] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    3.626770] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    3.626780] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[    3.636598] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.636606] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[    3.636610] [drm:intel_edp_init_connector] using pipe A for initial backlight setup
>[    3.636619] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 2450/7812
>[    3.636637] [drm:intel_dsi_init] 
>[    3.636687] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled
>[    3.636694] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: disabled
>[    3.636703] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DAC-30] hw state readout: disabled, pipe A
>[    3.636707] [drm:intel_modeset_readout_hw_state] [ENCODER:31:TMDS-31] hw state readout: disabled, pipe A
>[    3.636710] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: disabled, pipe A
>[    3.636728] [drm:intel_modeset_readout_hw_state] [ENCODER:38:TMDS-38] hw state readout: enabled, pipe A
>[    3.636731] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:eDP-1] hw state readout: enabled
>[    3.636735] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:VGA-1] hw state readout: disabled
>[    3.636739] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-1] hw state readout: disabled
>[    3.636742] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:DP-1] hw state readout: disabled
>[    3.636786] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff88003f933800 for pipe A
>[    3.636788] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    3.636791] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[    3.636793] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.636796] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 5333756, gmch_n: 8388608, link_m: 148159, link_n: 524288, tu: 64
>[    3.636799] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.636801] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.636803] [drm:intel_dump_pipe_config] requested mode:
>[    3.636807] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76299 1366 1414 1446 1610 768 771 776 790 0x40 0xa
>[    3.636809] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.636813] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76299 1366 1414 1446 1610 768 771 776 790 0x40 0xa
>[    3.636816] [drm:intel_dump_crtc_timings] crtc timings: 76299 1366 1414 1446 1610 768 771 776 790, type: 0x40 flags: 0xa
>[    3.636818] [drm:intel_dump_pipe_config] port clock: 270000
>[    3.636820] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[    3.636823] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    3.636825] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.636828] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.636830] [drm:intel_dump_pipe_config] ips: 0
>[    3.636831] [drm:intel_dump_pipe_config] double wide: 0
>[    3.636834] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
>[    3.636836] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.636839] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[    3.636841] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[    3.636844] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    3.636847] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[    3.636853] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff8802762ae000 for pipe B
>[    3.636855] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    3.636857] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    3.636860] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.636863] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.636865] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.636867] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.636869] [drm:intel_dump_pipe_config] requested mode:
>[    3.636872] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.636874] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.636878] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.636881] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.636882] [drm:intel_dump_pipe_config] port clock: 0
>[    3.636884] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    3.636887] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    3.636889] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.636891] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.636893] [drm:intel_dump_pipe_config] ips: 0
>[    3.636895] [drm:intel_dump_pipe_config] double wide: 0
>[    3.636897] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[    3.636899] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.636902] [drm:intel_dump_pipe_config] STANDARD PLANE:24 plane: 1.0 idx: 4 disabled, scaler_id = 0
>[    3.636904] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 1.2 idx: 5 disabled, scaler_id = 0
>[    3.636907] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 1.1 idx: 6 disabled, scaler_id = 0
>[    3.636910] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.2 idx: 7 disabled, scaler_id = 0
>[    3.636928] [drm:vlv_get_fifo_size] Pipe A primary A FIFO size: 256
>[    3.636934] [drm:vlv_get_fifo_size] Pipe A sprite A FIFO size: 128
>[    3.636938] [drm:vlv_get_fifo_size] Pipe A sprite B FIFO size: 127
>[    3.636941] [drm:vlv_get_fifo_size] Pipe B primary B FIFO size: 256
>[    3.636945] [drm:vlv_get_fifo_size] Pipe B sprite C FIFO size: 128
>[    3.636948] [drm:vlv_get_fifo_size] Pipe B sprite D FIFO size: 127
>[    3.636952] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15
>[    3.636955] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15
>[    3.636957] [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0
>[    3.636962] [drm:intel_power_well_disable] disabling always-on
>[    3.636978] [drm:i9xx_get_initial_plane_config] pipe/plane A/0 with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000
>[    3.636982] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=408000
>[    3.636990] [drm:i915_pages_create_for_stolen] offset=0x0, size=4227072
>[    3.636999] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880276284dc0
>[    3.637010] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 408000
>[    3.637014] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [408000, 7ffff000]
>[    3.638578] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    3.647661] [drm:i915_gem_context_init] HW context support initialized
>[    3.647670] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    3.647676] [drm:i915_pages_create_for_stolen] offset=0x408000, size=131072
>[    3.647693] [drm:init_status_page] render ring hws offset: 0x00409000
>[    3.647751] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0042c000
>[    3.647755] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    3.647758] [drm:i915_pages_create_for_stolen] offset=0x428000, size=131072
>[    3.647779] [drm:init_status_page] bsd ring hws offset: 0x0042d000
>[    3.647802] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    3.647808] [drm:i915_pages_create_for_stolen] offset=0x448000, size=131072
>[    3.647823] [drm:init_status_page] blitter ring hws offset: 0x00450000
>[    3.648115] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000
>[    3.648122] [drm:i915_pages_create_for_stolen] offset=0x3efa000, size=24576
>[    3.648256] [drm:valleyview_setup_pctx] PCBR: 0x7eefa001
>[    3.648267] [drm:valleyview_init_gt_powersave] DDR speed: 1333 MHz
>[    3.650305] [drm:valleyview_init_gt_powersave] max GPU freq: 895 MHz (226)
>[    3.650325] [drm:valleyview_init_gt_powersave] RPe GPU freq: 645 MHz (214)
>[    3.652228] [drm:valleyview_init_gt_powersave] RP1(Guar Freq) GPU freq: 312 MHz (198)
>[    3.654283] [drm:valleyview_init_gt_powersave] min GPU freq: 187 MHz (192)
>[    3.654307] [drm:intel_update_cdclk] Current CD clock rate: 333333 kHz
>[    3.654422] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    3.654427] [drm:intel_fbdev_init_bios] found possible fb from plane A
>[    3.654430] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[    3.654432] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
>[    3.654435] [drm:intel_fbdev_init_bios] pipe A area: 1366x768, bpp: 32, size: 4227072
>[    3.654437] [drm:intel_fbdev_init_bios] fb big enough for plane A (4227072 >= 4227072)
>[    3.654440] [drm:intel_fbdev_init_bios] pipe B not active, skipping
>[    3.654442] [drm:intel_fbdev_init_bios] using BIOS fb for initial console
>[    3.654468] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1]
>[    3.654472] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1]
>[    3.655021] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] status updated from unknown to connected
>[    3.655042] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.655048] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes :
>[    3.655052] [drm:drm_mode_debug_printmodeline] Modeline 40:"1366x768" 60 76300 1366 1414 1446 1610 768 771 776 790 0x48 0xa
>[    3.655055] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:VGA-1]
>[    3.655058] [drm:intel_crt_detect] [CONNECTOR:29:VGA-1] force=1
>[    3.655062] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[    3.655364] [drm:intel_didl_outputs] 10 outputs detected
>[    3.657447] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.658030] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    3.659836] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
>[    3.662283] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, result 0
>[    3.662288] [drm:intel_crt_detect] CRT not detected via hotplug
>[    3.662488] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.662490] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    3.662685] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.662689] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.662691] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.662694] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.663642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.663645] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.663647] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.663652] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:VGA-1] status updated from unknown to disconnected
>[    3.663660] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:VGA-1] disconnected
>[    3.663665] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1]
>[    3.663668] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
>[    3.788449] [drm:intel_hdmi_detect] Live status not up!
>[    3.788460] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] status updated from unknown to disconnected
>[    3.788465] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] disconnected
>[    3.788471] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:DP-1]
>[    3.788474] [drm:intel_dp_detect] [CONNECTOR:37:DP-1]
>[    3.788480] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:DP-1] status updated from unknown to disconnected
>[    3.788483] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:DP-1] disconnected
>[    3.788488] [drm:drm_setup_crtcs] 
>[    3.788491] [drm:drm_enable_connectors] connector 39 enabled? yes
>[    3.788494] [drm:drm_enable_connectors] connector 29 enabled? no
>[    3.788496] [drm:drm_enable_connectors] connector 32 enabled? no
>[    3.788499] [drm:drm_enable_connectors] connector 37 enabled? no
>[    3.788509] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    3.788512] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    3.788515] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1366x768
>[    3.788517] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    3.788519] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    3.788521] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    3.788524] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 21 (0,0)
>[    3.788530] [drm:intelfb_create] re-using BIOS fb
>[    3.788552] [drm:drm_fb_helper_hotplug_event] 
>[    3.788559] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1]
>[    3.788565] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1]
>[    3.788574] [drm:intelfb_create] allocated 1366x768 fb: 0x00000000, bo ffff880276284dc0
>[    3.788684] fbcon: inteldrmfb (fb0) is primary device
>[    3.789130] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.789134] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes :
>[    3.789138] [drm:drm_mode_debug_printmodeline] Modeline 40:"1366x768" 60 76300 1366 1414 1446 1610 768 771 776 790 0x48 0xa
>[    3.789139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:VGA-1]
>[    3.789141] [drm:intel_crt_detect] [CONNECTOR:29:VGA-1] force=1
>[    3.789147] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[    3.794443] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, result 0
>[    3.794444] [drm:intel_crt_detect] CRT not detected via hotplug
>[    3.794607] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.794608] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    3.794760] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.794762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.794763] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.794765] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.795627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.795629] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.795630] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.795633] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:VGA-1] disconnected
>[    3.795636] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1]
>[    3.795637] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
>[    3.920631] usb 1-2: new high-speed USB device number 2 using xhci_hcd
>[    3.920640] [drm:intel_hdmi_detect] Live status not up!
>[    3.920640] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] disconnected
>[    3.920645] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:DP-1]
>[    3.920650] [drm:intel_dp_detect] [CONNECTOR:37:DP-1]
>[    3.920655] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:DP-1] disconnected
>[    3.920665] [drm:drm_setup_crtcs] 
>[    3.920668] [drm:drm_enable_connectors] connector 39 enabled? yes
>[    3.920669] [drm:drm_enable_connectors] connector 29 enabled? no
>[    3.920670] [drm:drm_enable_connectors] connector 32 enabled? no
>[    3.920671] [drm:drm_enable_connectors] connector 37 enabled? no
>[    3.920674] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    3.920675] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    3.920678] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1366x768
>[    3.920679] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    3.920680] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    3.920681] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    3.920682] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 21 (0,0)
>[    3.920713] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains
>[    3.920715] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18
>[    3.920719] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 76300KHz
>[    3.920721] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[    3.920722] [drm:intel_dp_compute_config] DP link bw required 137340 available 216000
>[    3.920724] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[    3.920726] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff8802760d7000 for pipe A
>[    3.920727] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    3.920728] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[    3.920730] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.920732] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64
>[    3.920733] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.920734] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.920735] [drm:intel_dump_pipe_config] requested mode:
>[    3.920738] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1414 1446 1610 768 771 776 790 0x48 0xa
>[    3.920738] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.920741] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1414 1446 1610 768 771 776 790 0x48 0xa
>[    3.920743] [drm:intel_dump_crtc_timings] crtc timings: 76300 1366 1414 1446 1610 768 771 776 790, type: 0x48 flags: 0xa
>[    3.920744] [drm:intel_dump_pipe_config] port clock: 270000
>[    3.920745] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[    3.920746] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    3.920747] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.920748] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.920749] [drm:intel_dump_pipe_config] ips: 0
>[    3.920750] [drm:intel_dump_pipe_config] double wide: 0
>[    3.920751] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
>[    3.920752] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.920755] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
>[    3.920757] [drm:intel_dump_pipe_config] 	FB:45, fb = 1366x768 format = 0x34325258
>[    3.920757] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
>[    3.920758] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[    3.920760] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    3.920761] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[    3.920778] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[    3.932955] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[    3.949649] [drm:intel_edp_backlight_off] 
>[    4.049928] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
>[    4.049930] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    4.049932] usb 1-2: Product: USB2.0 Hub
>[    4.050473] hub 1-2:1.0: USB hub found
>[    4.050748] hub 1-2:1.0: 3 ports detected
>[    4.051446] usb: port power management may be unreliable
>[    4.153014] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    4.153347] [drm:edp_panel_off] Turn eDP port C panel power off
>[    4.153351] [drm:wait_panel_off] Wait for panel power off time
>[    4.153357] [drm:wait_panel_status] mask b0000000 value 00000000 status c0000008 control abcd0000
>[    4.164990] usb 1-4: new high-speed USB device number 3 using xhci_hcd
>[    4.185642] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040
>[    4.185645] [drm:intel_hpd_irq_handler] digital hpd port C - long
>[    4.185646] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0
>[    4.186027] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C
>[    4.193077] [drm:wait_panel_status] Wait complete
>[    4.193104] [drm:intel_disable_pipe] disabling pipe A
>[    4.201318] [drm:intel_dp_link_down] 
>[    4.261306] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[    4.262063] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[    4.262065] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    4.317973] clocksource: Switched to clocksource tsc
>[    4.346481] usb 1-4: New USB device found, idVendor=064e, idProduct=9400
>[    4.346483] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    4.346485] usb 1-4: Product: HD WebCam
>[    4.346486] usb 1-4: Manufacturer: SuYin
>[    4.346488] usb 1-4: SerialNumber: HF1019-T838-SN02-Rev0101
>[    4.365313] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
>[    4.454446] usb 1-2.1: New USB device found, idVendor=04ca, idProduct=300b
>[    4.454450] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    4.455786] PM: Starting manual resume from disk
>[    4.455790] PM: Hibernation image partition 8:4 present
>[    4.455790] PM: Looking for hibernation image.
>[    4.757944] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    4.757945] [drm:wait_panel_status] Wait complete
>[    4.757949] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[    4.757950] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled
>[    4.818062] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040
>[    4.818064] [drm:intel_hpd_irq_handler] digital hpd port C - long
>[    4.818066] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 1
>[    4.818567] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C
>[    4.842094] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[    4.846467] [drm:valleyview_enable_rps] GPLL enabled? yes
>[    4.846468] [drm:valleyview_enable_rps] GPU status: 0x0000c6d0
>[    4.846470] [drm:valleyview_enable_rps] current GPU freq: 312 MHz (198)
>[    4.846471] [drm:valleyview_enable_rps] setting GPU freq to 645 MHz (214)
>[    4.962261] [drm:edp_panel_on] Turn eDP port C panel power on
>[    4.962264] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    4.962267] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[    4.962268] [drm:wait_panel_status] Wait complete
>[    4.962270] [drm:wait_panel_on] Wait for panel power on
>[    4.962272] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[    5.122885] [drm:wait_panel_status] Wait complete
>[    5.122889] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[    5.122893] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[    5.122902] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[    5.122905] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    5.137423] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    5.137424] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    5.138266] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[    5.139375] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[    5.139560] [drm:intel_enable_pipe] enabling pipe A
>[    5.139570] [drm:intel_edp_backlight_on] 
>[    5.139571] [drm:intel_panel_enable_backlight] pipe A
>[    5.139574] [drm:intel_panel_actually_set_backlight] set backlight PWM = 2450
>[    5.139578] [drm:intel_psr_enable] PSR not supported by this panel
>[    5.156940] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[    5.156947] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=937, cursor=0 level=0 cxsr=1
>[    5.156949] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
>[    5.156961] [drm:intel_connector_check_state] [CONNECTOR:39:eDP-1]
>[    5.156966] [drm:check_encoder_state] [ENCODER:30:DAC-30]
>[    5.156969] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
>[    5.156972] [drm:check_encoder_state] [ENCODER:36:TMDS-36]
>[    5.156974] [drm:check_encoder_state] [ENCODER:38:TMDS-38]
>[    5.156978] [drm:check_crtc_state] [CRTC:21]
>[    5.159049] [drm:drm_fb_helper_hotplug_event] 
>[    5.159052] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1]
>[    5.159053] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1]
>[    5.159700] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    5.159705] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes :
>[    5.159708] [drm:drm_mode_debug_printmodeline] Modeline 40:"1366x768" 60 76300 1366 1414 1446 1610 768 771 776 790 0x48 0xa
>[    5.159709] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:VGA-1]
>[    5.159711] [drm:intel_crt_detect] [CONNECTOR:29:VGA-1] force=1
>[    5.159713] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[    5.165737] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, result 0
>[    5.165738] [drm:intel_crt_detect] CRT not detected via hotplug
>[    5.165949] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    5.165950] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    5.166152] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    5.166154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    5.166155] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    5.166156] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    5.166707] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    5.166709] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    5.166710] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    5.166711] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:VGA-1] disconnected
>[    5.166713] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1]
>[    5.166714] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
>[    5.211462] random: nonblocking pool is initialized
>[    5.294805] [drm:intel_hdmi_detect] Live status not up!
>[    5.294805] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] disconnected
>[    5.294809] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:DP-1]
>[    5.294810] [drm:intel_dp_detect] [CONNECTOR:37:DP-1]
>[    5.294814] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:DP-1] disconnected
>[    5.294823] [drm:drm_setup_crtcs] 
>[    5.294826] [drm:drm_enable_connectors] connector 39 enabled? yes
>[    5.294827] [drm:drm_enable_connectors] connector 29 enabled? no
>[    5.294828] [drm:drm_enable_connectors] connector 32 enabled? no
>[    5.294829] [drm:drm_enable_connectors] connector 37 enabled? no
>[    5.294832] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    5.294833] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    5.294836] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1366x768
>[    5.294837] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    5.294838] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    5.294839] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    5.294840] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 21 (0,0)
>[    5.295011] Console: switching to colour frame buffer device 170x48
>[    5.303847] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    5.389794] PM: Image not found (code -22)
>[    5.389799] PM: Hibernation image not present or could not be loaded.
>[    5.715418] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
>[    6.249654] systemd-journald[124]: Received SIGTERM from PID 1 (systemd).
>[    7.381620] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
>[    8.171430] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[    8.171439] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   10.926449] audit_printk_skb: 87 callbacks suppressed
>[   10.926454] audit: type=1130 audit(1459761399.980:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=haveged comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   10.926485] audit: type=1131 audit(1459761399.980:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=haveged comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   10.927300] audit: type=1130 audit(1459761399.980:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   10.927327] audit: type=1131 audit(1459761399.980:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   10.927860] audit: type=1130 audit(1459761399.984:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   10.927888] audit: type=1131 audit(1459761399.984:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   10.929335] audit: type=1130 audit(1459761399.984:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   10.929368] audit: type=1131 audit(1459761399.984:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   11.048141] audit: type=1130 audit(1459761400.104:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dm-event comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   11.068736] audit: type=1130 audit(1459761400.124:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-root-symlink comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   11.752590] EXT4-fs (sda7): re-mounted. Opts: acl,user_xattr
>[   11.988573] systemd-journald[366]: Received request to flush runtime journal from PID 1
>[   13.885592] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   14.741361] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
>[   14.784592] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   16.105966] audit_printk_skb: 45 callbacks suppressed
>[   16.105972] audit: type=1130 audit(1459761405.152:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   16.229257] audit: type=1325 audit(1459761405.276:63): table=mangle family=10 entries=0
>[   16.229287] audit: type=1325 audit(1459761405.276:63): table=mangle family=10 entries=0
>[   16.229371] audit: type=1300 audit(1459761405.276:63): arch=c000003e syscall=313 success=yes exit=0 a0=3 a1=41a218 a2=0 a3=3 items=0 ppid=350 pid=427 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
>[   16.229385] audit: type=1327 audit(1459761405.276:63): proctitle=6D6F6470726F6265006970367461626C655F6D616E676C65
>[   16.446279] input: PC Speaker as /devices/platform/pcspkr/input/input6
>[   16.450609] wmi: Mapper loaded
>[   16.749272] ACPI: AC Adapter [ACAD] (on-line)
>[   16.877849] [Firmware Bug]: No valid trip found
>[   16.901513] audit: type=1325 audit(1459761405.944:64): table=filter family=2 entries=0
>[   16.901534] audit: type=1325 audit(1459761405.944:64): table=filter family=2 entries=0
>[   16.901602] audit: type=1300 audit(1459761405.944:64): arch=c000003e syscall=313 success=yes exit=0 a0=0 a1=41a218 a2=0 a3=0 items=0 ppid=64 pid=546 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
>[   16.901615] audit: type=1327 audit(1459761405.944:64): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
>[   17.151241] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   17.199666] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
>[   17.213284] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=7000/7812
>[   17.213289] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7000
>[   17.214234] audit: type=1130 audit(1459761406.260:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   17.325565] ACPI Warning: SystemIO range 0x0000000000002000-0x000000000000201F conflicts with OpRegion 0x0000000000002000-0x000000000000200F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
>[   17.325576] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   18.842080] acer_wmi: Acer Laptop ACPI-WMI Extras
>[   18.842161] acer_wmi: Function bitmap for Communication Button: 0x801
>[   18.844386] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
>[   18.844526] input: Acer WMI hotkeys as /devices/virtual/input/input7
>[   18.846563] input: Acer BMA150 accelerometer as /devices/virtual/input/input8
>[   18.979730] input: SYN1B7E:01 06CB:2970 Touchpad as /devices/platform/80860F41:02/i2c-8/i2c-SYN1B7E:01/0018:06CB:2970.0001/input/input9
>[   18.979940] hid-multitouch 0018:06CB:2970.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN1B7E:01 06CB:2970] on i2c-SYN1B7E:01
>[   19.077400] Bluetooth: Core ver 2.21
>[   19.077435] NET: Registered protocol family 31
>[   19.077438] Bluetooth: HCI device and connection manager initialized
>[   19.077444] Bluetooth: HCI socket layer initialized
>[   19.077451] Bluetooth: L2CAP socket layer initialized
>[   19.077461] Bluetooth: SCO socket layer initialized
>[   19.121942] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[   19.121961] r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
>[   19.130069] r8169 0000:01:00.1 eth0: RTL8411 at 0xffffc90000e9e000, f8:a9:63:a8:8a:4d, XID 1c800800 IRQ 92
>[   19.130075] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[   19.131843] r8169 0000:01:00.1 enp1s0f1: renamed from eth0
>[   19.209150] [Firmware Bug]: battery: (dis)charge rate invalid.
>[   19.209158] ACPI: Battery Slot [BAT1] (battery present)
>[   19.374246] Bluetooth: HCI UART driver ver 2.3
>[   19.374252] Bluetooth: HCI UART protocol H4 registered
>[   19.374254] Bluetooth: HCI UART protocol BCSP registered
>[   19.374256] Bluetooth: HCI UART protocol LL registered
>[   19.374258] Bluetooth: HCI UART protocol ATH3K registered
>[   19.374260] Bluetooth: HCI UART protocol Three-wire (H5) registered
>[   19.374310] Bluetooth: HCI UART protocol Intel registered
>[   19.374335] Bluetooth: HCI UART protocol BCM registered
>[   19.374338] Bluetooth: HCI UART protocol QCA registered
>[   19.490674] intel_soc_dts_thermal: request_threaded_irq ret -22
>[   19.522156] intel_soc_dts_thermal: request_threaded_irq ret -22
>[   19.566175] intel_soc_dts_thermal: request_threaded_irq ret -22
>[   19.614320] intel_soc_dts_thermal: request_threaded_irq ret -22
>[   19.658896] iTCO_vendor_support: vendor-support=0
>[   19.690189] intel_rapl: Found RAPL domain package
>[   19.690195] intel_rapl: Found RAPL domain core
>[   19.925668] device-mapper: uevent: version 1.0.3
>[   19.926130] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
>[   20.064045] ath: phy0: WB335 2-ANT card detected
>[   20.064051] ath: phy0: Set BT/WLAN RX diversity capability
>[   20.070568] ath: phy0: Enable LNA combining
>[   20.071670] ath: phy0: ASPM enabled: 0x42
>[   20.071673] ath: EEPROM regdomain: 0x65
>[   20.071675] ath: EEPROM indicates we should expect a direct regpair map
>[   20.071678] ath: Country alpha2 being used: 00
>[   20.071680] ath: Regpair used: 0x65
>[   20.323504] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[   20.324003] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90001500000, irq=17
>[   20.343663] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[   20.363195] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
>[   20.440570] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[   20.440665] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
>[   20.440904] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   21.318399] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[   21.318406] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   21.318409] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[   21.318412] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[   21.318414] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[   21.318418] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
>[   21.389469] usbcore: registered new interface driver btusb
>[   21.560769] Linux video capture interface: v2.00
>[   21.690253] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>[   21.690377] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[   22.706493] usbcore: registered new interface driver ath3k
>[   22.795407] uvcvideo: Found UVC 1.00 device HD WebCam (064e:9400)
>[   22.799837] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input13
>[   22.799966] usbcore: registered new interface driver uvcvideo
>[   22.799969] USB Video Class driver (1.1.1)
>[   22.842534] usb 1-2.1: USB disconnect, device number 4
>[   23.043235] usb 1-2.1: new full-speed USB device number 5 using xhci_hcd
>[   23.132563] usb 1-2.1: New USB device found, idVendor=04ca, idProduct=300b
>[   23.132569] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[   23.286130] audit_printk_skb: 45 callbacks suppressed
>[   23.286135] audit: type=1325 audit(1459761410.160:71): table=filter family=10 entries=4
>[   23.286169] audit: type=1300 audit(1459761410.160:71): arch=c000003e syscall=54 success=yes exit=0 a0=5 a1=29 a2=40 a3=118ceb0 items=0 ppid=350 pid=630 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-batch" exe="/usr/sbin/ip6tables-batch" key=(null)
>[   23.286184] audit: type=1327 audit(1459761410.160:71): proctitle=2F7573722F7362696E2F6970367461626C65732D6261746368002F746D702F537553456669726577616C6C325F6970367461626C65732E75384A72504A366D
>[   23.286267] audit: type=1325 audit(1459761412.320:72): table=mangle family=10 entries=6
>[   23.286290] audit: type=1300 audit(1459761412.320:72): arch=c000003e syscall=54 success=yes exit=0 a0=7 a1=29 a2=40 a3=118c490 items=0 ppid=350 pid=630 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-batch" exe="/usr/sbin/ip6tables-batch" key=(null)
>[   23.286298] audit: type=1327 audit(1459761412.320:72): proctitle=2F7573722F7362696E2F6970367461626C65732D6261746368002F746D702F537553456669726577616C6C325F6970367461626C65732E75384A72504A366D
>[   23.286344] audit: type=1325 audit(1459761412.320:73): table=raw family=10 entries=3
>[   23.286363] audit: type=1300 audit(1459761412.320:73): arch=c000003e syscall=54 success=yes exit=0 a0=8 a1=29 a2=40 a3=1187310 items=0 ppid=350 pid=630 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-batch" exe="/usr/sbin/ip6tables-batch" key=(null)
>[   23.286371] audit: type=1327 audit(1459761412.320:73): proctitle=2F7573722F7362696E2F6970367461626C65732D6261746368002F746D702F537553456669726577616C6C325F6970367461626C65732E75384A72504A366D
>[   24.246110] audit: type=1130 audit(1459761413.280:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=SuSEfirewall2_init comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   24.274206] Adding 4197372k swap on /dev/sda4.  Priority:-1 extents:1 across:4197372k FS
>[   26.894581] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[   26.989164] SGI XFS with ACLs, security attributes, realtime, no debug enabled
>[   27.896565] XFS (sda6): Mounting V5 Filesystem
>[   28.104061] XFS (sda8): Mounting V5 Filesystem
>[   28.617493] audit_printk_skb: 21 callbacks suppressed
>[   28.617499] audit: type=1130 audit(1459761417.644:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2dlabel-SUSE132 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   28.811002] audit: type=1130 audit(1459761417.836:83): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2dlabel-HOMEBASIS comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   28.930311] audit: type=1131 audit(1459761417.956:84): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   29.371495] XFS (sda6): Ending clean mount
>[   29.811196] XFS (sda9): Mounting V5 Filesystem
>[   30.474458] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[   30.478516] audit: type=1130 audit(1459761419.500:85): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2dlabel-HOME421 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   30.878029] audit: type=1130 audit(1459761419.900:86): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2dlabel-SUSE421 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   31.673432] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: acl,user_xattr
>[   31.947903] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: acl,user_xattr
>[   32.406179] XFS (sda9): Ending clean mount
>[   33.333883] audit: type=1130 audit(1459761422.352:87): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   34.192177] XFS (sda8): Ending clean mount
>[   34.256290] audit: type=1130 audit(1459761423.272:88): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   34.400828] audit: type=1130 audit(1459761423.416:89): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   34.400863] audit: type=1131 audit(1459761423.416:90): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   34.462921] audit: type=1130 audit(1459761423.480:91): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   34.479555] audit: type=1130 audit(1459761423.496:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   34.598690] audit: type=1305 audit(1459761423.616:93): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
>[   34.598713] audit: type=1305 audit(1459761423.616:94): audit_pid=896 old=0 auid=4294967295 ses=4294967295 res=1
>[   36.520623] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   36.520628] Bluetooth: BNEP filters: protocol multicast
>[   36.520635] Bluetooth: BNEP socket layer initialized
>[   43.527414] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[   43.546808] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[   43.549810] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
>[   44.015004] r8169 0000:01:00.1 enp1s0f1: link down
>[   44.015080] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
>[   44.425393] NET: Registered protocol family 17
>[   44.470458] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[   45.380849] wlp2s0: authenticate with 9c:c7:a6:0a:1f:4a
>[   45.392859] wlp2s0: send auth to 9c:c7:a6:0a:1f:4a (try 1/3)
>[   45.397011] wlp2s0: authenticated
>[   45.399516] wlp2s0: associate with 9c:c7:a6:0a:1f:4a (try 1/3)
>[   45.406185] wlp2s0: RX AssocResp from 9c:c7:a6:0a:1f:4a (capab=0x431 status=0 aid=2)
>[   45.406292] wlp2s0: associated
>[   45.406371] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[   45.412036] ath: EEPROM regdomain: 0x8114
>[   45.412042] ath: EEPROM indicates we should expect a country code
>[   45.412045] ath: doing EEPROM country->regdmn map search
>[   45.412047] ath: country maps to regdmn code: 0x37
>[   45.412049] ath: Country alpha2 being used: DE
>[   45.412051] ath: Regpair used: 0x37
>[   45.412053] ath: regdomain 0x8114 dynamically updated by country IE
>[   47.464663] SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:1acf:5eff:fe84:2a9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=418 TC=0 HOPLIMIT=255 FLOWLBL=574839 PROTO=UDP SPT=5353 DPT=5353 LEN=378 
>[   47.466527] SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:1acf:5eff:fe84:2a9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=249 TC=0 HOPLIMIT=255 FLOWLBL=574839 PROTO=UDP SPT=5353 DPT=5353 LEN=209 
>[   47.715260] SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:1acf:5eff:fe84:2a9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=418 TC=0 HOPLIMIT=255 FLOWLBL=574839 PROTO=UDP SPT=5353 DPT=5353 LEN=378 
>[   47.966017] SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:1acf:5eff:fe84:2a9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=418 TC=0 HOPLIMIT=255 FLOWLBL=574839 PROTO=UDP SPT=5353 DPT=5353 LEN=378 
>[   48.167427] SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:1acf:5eff:fe84:2a9c DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=388 TC=0 HOPLIMIT=255 FLOWLBL=574839 PROTO=UDP SPT=5353 DPT=5353 LEN=348 
>[   49.526916] [drm:i915_gem_open] 
>[   49.919306] [drm:i915_gem_open] 
>[   49.919338] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
>[   49.919939] [drm:i915_gem_open] 
>[   49.919966] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
>[   49.919973] [drm:drm_mode_getresources] [CRTC:21:crtc-0]
>[   49.919975] [drm:drm_mode_getresources] [CRTC:26:crtc-1]
>[   49.919977] [drm:drm_mode_getresources] [ENCODER:30:DAC-30]
>[   49.919979] [drm:drm_mode_getresources] [ENCODER:31:TMDS-31]
>[   49.919981] [drm:drm_mode_getresources] [ENCODER:36:TMDS-36]
>[   49.919983] [drm:drm_mode_getresources] [ENCODER:38:TMDS-38]
>[   49.919986] [drm:drm_mode_getresources] [CONNECTOR:39:eDP-1]
>[   49.919988] [drm:drm_mode_getresources] [CONNECTOR:29:VGA-1]
>[   49.919990] [drm:drm_mode_getresources] [CONNECTOR:32:HDMI-A-1]
>[   49.919992] [drm:drm_mode_getresources] [CONNECTOR:37:DP-1]
>[   49.919994] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
>[   49.943016] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
>[   49.943045] [drm:drm_mode_addfb2] [FB:47]
>[   49.945529] [drm:internal_framebuffer_create] could not create framebuffer
>[   49.945552] [drm:internal_framebuffer_create] could not create framebuffer
>[   49.945586] [drm:drm_mode_addfb2] [FB:47]
>[   49.945704] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
>[   49.945711] [drm:drm_mode_getresources] [CRTC:21:crtc-0]
>[   49.945713] [drm:drm_mode_getresources] [CRTC:26:crtc-1]
>[   49.945716] [drm:drm_mode_getresources] [ENCODER:30:DAC-30]
>[   49.945718] [drm:drm_mode_getresources] [ENCODER:31:TMDS-31]
>[   49.945720] [drm:drm_mode_getresources] [ENCODER:36:TMDS-36]
>[   49.945722] [drm:drm_mode_getresources] [ENCODER:38:TMDS-38]
>[   49.945724] [drm:drm_mode_getresources] [CONNECTOR:39:eDP-1]
>[   49.945726] [drm:drm_mode_getresources] [CONNECTOR:29:VGA-1]
>[   49.945728] [drm:drm_mode_getresources] [CONNECTOR:32:HDMI-A-1]
>[   49.945730] [drm:drm_mode_getresources] [CONNECTOR:37:DP-1]
>[   49.945732] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
>[   49.945837] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[   49.945859] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[   49.958577] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[   49.958597] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[   49.958662] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   49.958671] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   49.958735] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   49.958744] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   50.166076] [drm:drm_mode_addfb2] [FB:47]
>[   51.108513] [drm:drm_mode_setcrtc] [CRTC:21:crtc-0]
>[   51.108526] [drm:drm_mode_setcrtc] [CONNECTOR:39:eDP-1]
>[   51.108569] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[   51.108592] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[   51.961714] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[   51.961722] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1]
>[   51.961725] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1]
>[   51.961736] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   51.961741] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   51.962206] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   51.962212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes :
>[   51.962217] [drm:drm_mode_debug_printmodeline] Modeline 40:"1366x768" 60 76300 1366 1414 1446 1610 768 771 776 790 0x48 0xa
>[   51.962224] [drm:drm_mode_getconnector] [CONNECTOR:39:?]
>[   51.962551] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   51.962555] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:DP-1]
>[   51.962557] [drm:intel_dp_detect] [CONNECTOR:37:DP-1]
>[   51.962562] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:DP-1] disconnected
>[   51.962570] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   51.962572] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1]
>[   51.962575] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
>[   52.090163] [drm:intel_hdmi_detect] Live status not up!
>[   52.090188] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] disconnected
>[   52.090253] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
>[   52.090269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:VGA-1]
>[   52.090283] [drm:intel_crt_detect] [CONNECTOR:29:VGA-1] force=1
>[   52.090300] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[   52.096033] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, result 0
>[   52.096050] [drm:intel_crt_detect] CRT not detected via hotplug
>[   52.096513] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   52.096531] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   52.096994] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   52.097019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   52.097032] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   52.097044] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   52.097695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   52.097709] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   52.097719] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   52.097735] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:VGA-1] disconnected
>[   53.810072] [drm:i915_gem_open] 
>[   53.897796] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[   53.903070] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[   54.974757] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   54.974785] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   66.815969] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[   66.882724] [drm:drm_mode_addfb2] [FB:44]
>[   67.015193] [drm:drm_mode_addfb2] [FB:48]
>[  278.305363] SFW2-INext-ACC-TCP IN=wlp2s0 OUT= MAC=18:cf:5e:84:2a:9c:e0:cb:4e:cd:d7:b6:86:dd SRC=2001:0980:64c7:0001:0000:0000:0001:0037 DST=2001:0980:64c7:0001:1acf:5eff:fe84:2a9c LEN=80 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=TCP SPT=44319 DPT=22 WINDOW=28800 RES=0x00 SYN URGP=0 OPT (020405A00402080A00332D2E0000000001030307) 
>[  282.738609] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation

Actions: View

Attachments on bug 94813: 122698

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.