Attachment 123298 Details for Bug 95161 – dmesg output

dmesg output

dmesg.txt (text/plain), 111.28 KB, created by Paolo Stivanin on 2016-04-27 10:15:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paolo Stivanin

Created: 2016-04-27 10:15:26 UTC

Size: 111.28 KB

patch

obsolete

>[    0.000000] Linux version 4.6.0-rc5-mainline (polslinux@intersect) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Tue Apr 26 17:04:48 CEST 2016
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-mainline root=UUID=ee879be3-d2e6-4670-82a6-0b669fa5144c rw nvidia-drm.modeset=1 drm.debug=14 quiet
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64
>[    0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005b574fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000005b575000-0x000000005b87efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000005b87f000-0x000000005c5cdfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000005c5ce000-0x000000005c5cefff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000005c5cf000-0x000000005c618fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000005c619000-0x000000005edb5fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000005edb6000-0x000000005f730fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000005f731000-0x000000005f817fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000005f818000-0x000000005fba2fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000005fba3000-0x000000005fffefff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000005ffff000-0x000000005fffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000060000000-0x00000000600fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000495ffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 3.0 present.
>[    0.000000] DMI: Notebook                         P640RE/P640RE, BIOS 1.05.01 10/23/2015
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x496000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
>[    0.000000]   1 base 0070000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 0068000000 mask 7FF8000000 uncachable
>[    0.000000]   3 base 0064000000 mask 7FFC000000 uncachable
>[    0.000000]   4 base 0062000000 mask 7FFE000000 uncachable
>[    0.000000]   5 base 0061000000 mask 7FFF000000 uncachable
>[    0.000000]   6 base 0060800000 mask 7FFF800000 uncachable
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0x60000 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fcce0-0x000fccef] mapped at [ffff8800000fcce0]
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x01b4e000, 0x01b4efff] PGTABLE
>[    0.000000] BRK [0x01b4f000, 0x01b4ffff] PGTABLE
>[    0.000000] BRK [0x01b50000, 0x01b50fff] PGTABLE
>[    0.000000] BRK [0x01b51000, 0x01b51fff] PGTABLE
>[    0.000000] BRK [0x01b52000, 0x01b52fff] PGTABLE
>[    0.000000] BRK [0x01b53000, 0x01b53fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x36b84000-0x375b9fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
>[    0.000000] ACPI: XSDT 0x000000005F818098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x000000005F831538 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: DSDT 0x000000005F8181E8 01934F (v02 ALASKA A M I    01072009 INTL 20120913)
>[    0.000000] ACPI: FACS 0x000000005FBA2F80 000040
>[    0.000000] ACPI: APIC 0x000000005F831648 0000BC (v03 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x000000005F831708 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FIDT 0x000000005F831750 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: MCFG 0x000000005F8317F0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
>[    0.000000] ACPI: HPET 0x000000005F831830 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)
>[    0.000000] ACPI: SSDT 0x000000005F831868 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
>[    0.000000] ACPI: SSDT 0x000000005F831B80 001100 (v01 INTEL  PtidDevc 00001000 INTL 20120913)
>[    0.000000] ACPI: DBGP 0x000000005F832C80 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x000000005F832CB8 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x000000005F832D10 00061A (v02 AMI    xh_rvp11 00000000 INTL 20120913)
>[    0.000000] ACPI: SSDT 0x000000005F833330 005773 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
>[    0.000000] ACPI: UEFI 0x000000005F838AA8 000042 (v01                 00000000      00000000)
>[    0.000000] ACPI: SSDT 0x000000005F838AF0 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
>[    0.000000] ACPI: SSDT 0x000000005F839948 00009F (v02 SgRef  SgPeg    00001000 INTL 20120913)
>[    0.000000] ACPI: DMAR 0x000000005F8399E8 0000A8 (v01 INTEL  SKL      00000001 INTL 00000001)
>[    0.000000] ACPI: SSDT 0x000000005F839A90 001A81 (v01 OptRef OptTabl  00001000 INTL 20120913)
>[    0.000000] ACPI: ASF! 0x000000005F83B518 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000495ffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x495ff5000-0x495ff8fff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000495ffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000005b574fff]
>[    0.000000]   node   0: [mem 0x000000005b87f000-0x000000005c5cdfff]
>[    0.000000]   node   0: [mem 0x000000005c619000-0x000000005edb5fff]
>[    0.000000]   node   0: [mem 0x000000005f731000-0x000000005f817fff]
>[    0.000000]   node   0: [mem 0x000000005ffff000-0x000000005fffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000495ffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000495ffffff]
>[    0.000000] On node 0 totalpages: 4147939
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 5998 pages used for memmap
>[    0.000000]   DMA32 zone: 383817 pages, LIFO batch:31
>[    0.000000]   Normal zone: 58752 pages used for memmap
>[    0.000000]   Normal zone: 3760128 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0x61000000-0x68ffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x5b575000-0x5b87efff]
>[    0.000000] PM: Registered nosave memory: [mem 0x5c5ce000-0x5c5cefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x5c5cf000-0x5c618fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x5edb6000-0x5f730fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x5f818000-0x5fba2fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x5fba3000-0x5fffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x60000000-0x600fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x60100000-0x60ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x61000000-0x68ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x69000000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>[    0.000000] e820: [mem 0x69000000-0xdfffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 32 pages/cpu @ffff880495c00000 s93464 r8192 d29416 u262144
>[    0.000000] pcpu-alloc: s93464 r8192 d29416 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4083104
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-mainline root=UUID=ee879be3-d2e6-4670-82a6-0b669fa5144c rw nvidia-drm.modeset=1 drm.debug=14 quiet
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 16242148K/16591756K available (5897K kernel code, 970K rwdata, 1784K rodata, 1224K init, 1152K bss, 349608K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Preemptible hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
>[    0.000000] NR_IRQS:8448 nr_irqs:2048 16
>[    0.000000] spurious 8259A interrupt: IRQ7.
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Unable to calibrate against PIT
>[    0.000000] tsc: using HPET reference calibration
>[    0.000000] tsc: Detected 2592.235 MHz processor
>[    0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 5186.48 BogoMIPS (lpj=8640783)
>[    0.000025] pid_max: default: 32768 minimum: 301
>[    0.000029] ACPI: Core revision 20160108
>[    0.015925] ACPI Error: [_UPC] Namespace lookup failure, AE_ALREADY_EXISTS (20160108/dswload-378)
>[    0.015929] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20160108/psobject-227)
>[    0.015950] ACPI Exception: AE_ALREADY_EXISTS, (SSDT:xh_rvp11) while loading table (20160108/tbxfload-227)
>[    0.023920] ACPI Error: 1 table load failures, 7 successful (20160108/tbxfload-247)
>[    0.023935] Security Framework initialized
>[    0.023936] Yama: becoming mindful.
>[    0.024694] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.026931] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.027946] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.027958] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.028136] CPU: Physical Processor ID: 0
>[    0.028137] CPU: Processor Core ID: 0
>[    0.028140] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.028141] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.028144] mce: CPU supports 10 MCE banks
>[    0.028157] CPU0: Thermal monitoring enabled (TM1)
>[    0.028165] process: using mwait in idle threads
>[    0.028167] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.028167] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.028424] Freeing SMP alternatives memory: 24K (ffffffff81a26000 - ffffffff81a2c000)
>[    0.030174] ftrace: allocating 23430 entries in 92 pages
>[    0.037503] smpboot: Max logical packages: 2
>[    0.037505] smpboot: APIC(0) Converting physical 0 to logical package 0
>[    0.037508] DMAR: Host address width 39
>[    0.037509] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>[    0.037514] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0501e
>[    0.037572] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
>[    0.037575] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
>[    0.037576] DMAR: RMRR base: 0x0000005f4ab000 end: 0x0000005f4cafff
>[    0.037576] DMAR: RMRR base: 0x00000060800000 end: 0x00000068ffffff
>[    0.037578] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
>[    0.037579] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
>[    0.037579] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
>[    0.037580] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
>[    0.038966] DMAR-IR: Enabled IRQ remapping in xapic mode
>[    0.038967] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.042852] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.075860] TSC deadline timer enabled
>[    0.075866] smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
>[    0.075873] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
>[    0.075894] ... version:                4
>[    0.075895] ... bit width:              48
>[    0.075895] ... generic registers:      4
>[    0.075896] ... value mask:             0000ffffffffffff
>[    0.075897] ... max period:             0000ffffffffffff
>[    0.075897] ... fixed-purpose events:   3
>[    0.075898] ... event mask:             000000070000000f
>[    0.076301] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.076350] x86: Booting SMP configuration:
>[    0.076351] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
>[    0.661414] x86: Booted up 1 node, 8 CPUs
>[    0.661417] smpboot: Total of 8 processors activated (41499.14 BogoMIPS)
>[    0.667891] devtmpfs: initialized
>[    0.667930] x86/mm: Memory block size: 128MB
>[    0.669816] PM: Registering ACPI NVS region [mem 0x5b575000-0x5b87efff] (3186688 bytes)
>[    0.669839] PM: Registering ACPI NVS region [mem 0x5c5ce000-0x5c5cefff] (4096 bytes)
>[    0.669840] PM: Registering ACPI NVS region [mem 0x5f818000-0x5fba2fff] (3715072 bytes)
>[    0.669923] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
>[    0.669981] pinctrl core: initialized pinctrl subsystem
>[    0.670091] RTC time: 10:11:14, date: 04/27/16
>[    0.670172] NET: Registered protocol family 16
>[    0.680853] cpuidle: using governor ladder
>[    0.694202] cpuidle: using governor menu
>[    0.694263] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.694264] ACPI: bus type PCI registered
>[    0.694265] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.694332] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.694334] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.694344] PCI: Using configuration type 1 for base access
>[    0.707653] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    0.707655] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.707859] ACPI: Added _OSI(Module Device)
>[    0.707861] ACPI: Added _OSI(Processor Device)
>[    0.707861] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.707862] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.708772] ACPI: Executed 23 blocks of module-level executable AML code
>[    0.715904] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.719081] ACPI: Dynamic OEM Table Load:
>[    0.719086] ACPI: SSDT 0xFFFF880483792000 0005DC (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
>[    0.719838] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
>[    0.720802] ACPI: Dynamic OEM Table Load:
>[    0.720806] ACPI: SSDT 0xFFFF880483358C00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
>[    0.722040] ACPI: Dynamic OEM Table Load:
>[    0.722045] ACPI: SSDT 0xFFFF880483792800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
>[    0.722973] ACPI: Dynamic OEM Table Load:
>[    0.722976] ACPI: SSDT 0xFFFF880483341A00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
>[    0.726894] ACPI : EC: EC started
>[    0.727330] ACPI: Interpreter enabled
>[    0.727358] ACPI: (supports S0 S3 S4 S5)
>[    0.727359] ACPI: Using IOAPIC for interrupt routing
>[    0.727384] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.728875] ACPI: Power Resource [PG00] (on)
>[    0.729197] ACPI: Power Resource [PG01] (on)
>[    0.729453] ACPI: Power Resource [PG02] (on)
>[    0.739087] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.739091] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.739113] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
>[    0.739114] _OSC request data: 1 1f 0
>[    0.739116] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.739540] PCI host bridge to bus 0000:00
>[    0.739542] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.739543] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.739544] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.739545] pci_bus 0000:00: root bus resource [mem 0x69000000-0xdfffffff window]
>[    0.739546] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
>[    0.739547] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.739552] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
>[    0.739628] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
>[    0.739656] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.739733] pci 0000:00:01.0: System wakeup disabled by ACPI
>[    0.739780] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
>[    0.739786] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
>[    0.739791] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xbfffffff 64bit pref]
>[    0.739794] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.739930] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
>[    0.739945] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
>[    0.740001] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.740064] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.740091] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
>[    0.740106] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
>[    0.740227] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
>[    0.740243] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
>[    0.740304] pci 0000:00:16.0: PME# supported from D3hot
>[    0.740403] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
>[    0.740415] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
>[    0.740421] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
>[    0.740427] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
>[    0.740433] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
>[    0.740439] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
>[    0.740445] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
>[    0.740477] pci 0000:00:17.0: PME# supported from D3hot
>[    0.740566] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
>[    0.740613] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.740687] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.740723] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
>[    0.740771] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.740845] pci 0000:00:1c.5: System wakeup disabled by ACPI
>[    0.740880] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
>[    0.741049] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
>[    0.741058] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
>[    0.741179] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
>[    0.741199] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
>[    0.741227] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
>[    0.741270] pci 0000:00:1f.3: PME# supported from D3hot D3cold
>[    0.741371] pci 0000:00:1f.3: System wakeup disabled by ACPI
>[    0.741401] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
>[    0.741447] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
>[    0.741516] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
>[    0.741692] pci 0000:01:00.0: [10de:13d8] type 00 class 0x030000
>[    0.741699] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
>[    0.741706] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.741712] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
>[    0.741716] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
>[    0.741721] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
>[    0.741788] pci 0000:01:00.0: System wakeup disabled by ACPI
>[    0.747587] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.747589] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>[    0.747591] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
>[    0.747594] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
>[    0.747665] pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000
>[    0.747682] pci 0000:02:00.0: reg 0x10: [mem 0xdf215000-0xdf215fff]
>[    0.747737] pci 0000:02:00.0: reg 0x30: [mem 0xdf200000-0xdf20ffff pref]
>[    0.747813] pci 0000:02:00.0: supports D1 D2
>[    0.747814] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>[    0.747858] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    0.747894] pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000
>[    0.747911] pci 0000:02:00.1: reg 0x10: [io  0xd000-0xd0ff]
>[    0.747935] pci 0000:02:00.1: reg 0x18: [mem 0xdf214000-0xdf214fff 64bit]
>[    0.747950] pci 0000:02:00.1: reg 0x20: [mem 0xdf210000-0xdf213fff 64bit]
>[    0.748030] pci 0000:02:00.1: supports D1 D2
>[    0.748031] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.754268] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.754270] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
>[    0.754272] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
>[    0.754363] pci 0000:03:00.0: [8086:24f3] type 00 class 0x028000
>[    0.754405] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
>[    0.754592] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>[    0.754655] pci 0000:03:00.0: System wakeup disabled by ACPI
>[    0.760953] pci 0000:00:1c.5: PCI bridge to [bus 03]
>[    0.760957] pci 0000:00:1c.5:   bridge window [mem 0xdf100000-0xdf1fffff]
>[    0.761834] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.761876] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.761916] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.761956] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.761995] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.762034] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.762073] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.762112] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.762351] ACPI: Enabled 5 GPEs in block 00 to 7F
>[    0.762423] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
>[    0.762502] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.762503] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.762506] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
>[    0.762508] vgaarb: loaded
>[    0.762508] vgaarb: bridge control possible 0000:01:00.0
>[    0.762509] vgaarb: no bridge control possible 0000:00:02.0
>[    0.762586] PCI: Using ACPI for IRQ routing
>[    0.790586] PCI: pci_cache_line_size set to 64 bytes
>[    0.790652] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
>[    0.790654] e820: reserve RAM buffer [mem 0x5b575000-0x5bffffff]
>[    0.790655] e820: reserve RAM buffer [mem 0x5c5ce000-0x5fffffff]
>[    0.790656] e820: reserve RAM buffer [mem 0x5edb6000-0x5fffffff]
>[    0.790657] e820: reserve RAM buffer [mem 0x5f818000-0x5fffffff]
>[    0.790658] e820: reserve RAM buffer [mem 0x496000000-0x497ffffff]
>[    0.790739] NetLabel: Initializing
>[    0.790740] NetLabel:  domain hash size = 128
>[    0.790741] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.790748] NetLabel:  unlabeled traffic allowed by default
>[    0.790819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.790822] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
>[    0.792863] clocksource: Switched to clocksource hpet
>[    0.796641] VFS: Disk quotas dquot_6.6.0
>[    0.796659] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.796752] pnp: PnP ACPI init
>[    0.796896] system 00:00: [io  0x0680-0x069f] has been reserved
>[    0.796898] system 00:00: [io  0xffff] has been reserved
>[    0.796899] system 00:00: [io  0xffff] has been reserved
>[    0.796900] system 00:00: [io  0xffff] has been reserved
>[    0.796901] system 00:00: [io  0x1800-0x18fe] could not be reserved
>[    0.796902] system 00:00: [io  0x164e-0x164f] has been reserved
>[    0.796903] system 00:00: [io  0x3322-0x3323] has been reserved
>[    0.796905] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.796963] system 00:01: [io  0x0800-0x087f] has been reserved
>[    0.796965] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.796980] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.797004] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.797005] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.797021] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.797096] pnp 00:05: Plug and Play ACPI device, IDs SYN1219 PNP0f13 (active)
>[    0.797233] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.797234] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.797235] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.797236] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.797237] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.797239] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
>[    0.797240] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.797241] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
>[    0.797242] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.797243] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
>[    0.797244] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.797272] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
>[    0.797273] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
>[    0.797274] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
>[    0.797275] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
>[    0.797276] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
>[    0.797277] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
>[    0.797279] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
>[    0.797280] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.797466] system 00:08: [io  0xff00-0xfffe] has been reserved
>[    0.797468] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.798152] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
>[    0.798153] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
>[    0.798154] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
>[    0.798156] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.798544] pnp: PnP ACPI: found 10 devices
>[    0.807123] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.807140] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.807141] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>[    0.807144] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
>[    0.807145] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
>[    0.807148] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.807150] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
>[    0.807153] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
>[    0.807157] pci 0000:00:1c.5: PCI bridge to [bus 03]
>[    0.807160] pci 0000:00:1c.5:   bridge window [mem 0xdf100000-0xdf1fffff]
>[    0.807165] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.807166] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.807167] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.807168] pci_bus 0000:00: resource 7 [mem 0x69000000-0xdfffffff window]
>[    0.807169] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
>[    0.807170] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>[    0.807171] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
>[    0.807172] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
>[    0.807173] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>[    0.807174] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
>[    0.807175] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
>[    0.807193] NET: Registered protocol family 2
>[    0.807360] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.807506] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.807587] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.807609] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.807643] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.807691] NET: Registered protocol family 1
>[    0.807703] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.808107] PCI: CLS 0 bytes, default 64
>[    0.808132] Unpacking initramfs...
>[    0.912685] Freeing initrd memory: 10456K (ffff880036b84000 - ffff8800375ba000)
>[    0.912702] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.912704] software IO TLB [mem 0x57575000-0x5b575000] (64MB) mapped at [ffff880057575000-ffff88005b574fff]
>[    0.912809] Scanning for low memory corruption every 60 seconds
>[    0.913078] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.913343] Initialise system trusted keyring
>[    0.913668] workingset: timestamp_bits=38 max_order=22 bucket_order=0
>[    0.914733] zbud: loaded
>[    0.914916] Key type big_key registered
>[    0.915693] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
>[    0.915818] io scheduler noop registered
>[    0.915820] io scheduler deadline registered
>[    0.915859] io scheduler cfq registered (default)
>[    0.916350] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.916354] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.916361] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
>[    0.916362] vesafb: scrolling: redraw
>[    0.916363] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.916371] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
>[    1.051778] Console: switching to colour frame buffer device 240x67
>[    1.184972] fb0: VESA VGA frame buffer device
>[    1.184989] intel_idle: MWAIT substates: 0x11142120
>[    1.184990] intel_idle: v0.4.1 model 0x5E
>[    1.185269] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    1.185296] GHES: HEST is not enabled!
>[    1.185377] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>[    1.185928] Linux agpgart interface v0.103
>[    1.186416] rtc_cmos 00:02: RTC can wake from S4
>[    1.186822] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.186901] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.186907] Intel P-state driver initializing.
>[    1.292925] intel_pstate: HWP enabled
>[    1.292942] ledtrig-cpu: registered to indicate activity on CPUs
>[    1.294605] NET: Registered protocol family 10
>[    1.295209] NET: Registered protocol family 17
>[    1.295735] microcode: CPU0 sig=0x506e3, pf=0x20, revision=0x49
>[    1.295761] microcode: CPU1 sig=0x506e3, pf=0x20, revision=0x49
>[    1.295770] microcode: CPU2 sig=0x506e3, pf=0x20, revision=0x49
>[    1.295819] microcode: CPU3 sig=0x506e3, pf=0x20, revision=0x49
>[    1.295871] microcode: CPU4 sig=0x506e3, pf=0x20, revision=0x49
>[    1.295895] microcode: CPU5 sig=0x506e3, pf=0x20, revision=0x49
>[    1.295917] microcode: CPU6 sig=0x506e3, pf=0x20, revision=0x49
>[    1.295966] microcode: CPU7 sig=0x506e3, pf=0x20, revision=0x49
>[    1.296069] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    1.296593] registered taskstats version 1
>[    1.296628] Loading compiled-in X.509 certificates
>[    1.296659] zswap: loaded using pool lzo/zbud
>[    1.298098]   Magic number: 12:691:174
>[    1.298142] acpi device:37: hash matches
>[    1.298153] acpi device:0a: hash matches
>[    1.298471] rtc_cmos 00:02: setting system clock to 2016-04-27 10:11:15 UTC (1461751875)
>[    1.298600] PM: Hibernation image not present or could not be loaded.
>[    1.300584] Freeing unused kernel memory: 1224K (ffffffff818f4000 - ffffffff81a26000)
>[    1.300586] Write protecting the kernel read-only data: 8192k
>[    1.301291] Freeing unused kernel memory: 232K (ffff8800015c6000 - ffff880001600000)
>[    1.302475] Freeing unused kernel memory: 264K (ffff8800017be000 - ffff880001800000)
>[    1.315370] random: systemd-tmpfile urandom read with 3 bits of entropy available
>[    1.325513] nvidia: module license 'NVIDIA' taints kernel.
>[    1.325519] Disabling lock debugging due to kernel taint
>[    1.340892] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
>[    1.340993] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
>[    1.341105] nvidia-nvlink: Nvlink Core is being initialized, major device number 248
>[    1.341122] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  364.19  Tue Apr 19 14:44:55 PDT 2016
>[    1.343699] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  364.19  Tue Apr 19 14:15:03 PDT 2016
>[    1.346991] nvidia-uvm: Loaded the UVM driver in lite mode, major device number 247
>[    1.349440] [drm] Initialized drm 1.1.0 20060810
>[    1.355164] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
>[    1.357306] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    1.357353] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    1.357382] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    1.357408] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    1.357433] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    1.357471] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    1.357497] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    1.912918] tsc: Refined TSC clocksource calibration: 2591.990 MHz
>[    1.912921] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cad98bda, max_idle_ns: 440795306906 ns
>[    2.196117] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    2.433227] nvidia-modeset: Allocated GPU:0 (GPU-6fb1b386-4e3e-49ba-2f8d-b34b5afadff9) @ PCI:0000:01:00.0
>[    2.434940] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    2.435014] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    2.435092] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    2.435143] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
>[    2.471236] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.471238] [drm] No driver support for vblank timestamp query.
>[    2.471240] [drm:drm_helper_hpd_irq_event] [CONNECTOR:38:DP-1] status updated from unknown to disconnected
>[    2.500265] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
>[    3.054554] clocksource: Switched to clocksource tsc
>[    3.057179] i8042: Detected active multiplexing controller, rev 1.1
>[    3.057773] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 124
>[    3.059312] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    3.059344] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    3.059363] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    3.059389] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    3.059406] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    3.059598] ACPI: bus type USB registered
>[    3.059622] usbcore: registered new interface driver usbfs
>[    3.059631] usbcore: registered new interface driver hub
>[    3.059649] SCSI subsystem initialized
>[    3.059654] usbcore: registered new device driver usb
>[    3.060564] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    3.060569] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    3.061451] libata version 3.00 loaded.
>[    3.061654] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
>[    3.061659] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    3.061848] hub 1-0:1.0: USB hub found
>[    3.061864] hub 1-0:1.0: 16 ports detected
>[    3.064048] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    3.069579] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    3.069581] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    3.069834] hub 2-0:1.0: USB hub found
>[    3.069844] hub 2-0:1.0: 8 ports detected
>[    3.071621] usb: port power management may be unreliable
>[    3.073627] ahci 0000:00:17.0: version 3.0
>[    3.073940] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0xd impl SATA mode
>[    3.073957] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
>[    3.087676] scsi host0: ahci
>[    3.088181] scsi host1: ahci
>[    3.088559] scsi host2: ahci
>[    3.088842] scsi host3: ahci
>[    3.088940] ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 126
>[    3.088943] ata2: DUMMY
>[    3.088946] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 126
>[    3.088949] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 126
>[    3.397134] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    3.397164] ata4: SATA link down (SStatus 4 SControl 300)
>[    3.397196] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    3.398920] ata1.00: supports DRM functions and may not be fully accessible
>[    3.398958] ata3.00: supports DRM functions and may not be fully accessible
>[    3.399465] ata1.00: disabling queued TRIM support
>[    3.399473] ata1.00: ATA-9: Samsung SSD 850 EVO M.2 250GB, EMT21B6Q, max UDMA/133
>[    3.399477] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    3.399498] ata3.00: disabling queued TRIM support
>[    3.399505] ata3.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
>[    3.399509] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    3.400280] ata1.00: supports DRM functions and may not be fully accessible
>[    3.400316] ata3.00: supports DRM functions and may not be fully accessible
>[    3.400764] ata1.00: disabling queued TRIM support
>[    3.400788] ata3.00: disabling queued TRIM support
>[    3.401097] ata1.00: configured for UDMA/133
>[    3.401125] ata3.00: configured for UDMA/133
>[    3.401588] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
>[    3.429474] usb 1-8: new full-speed USB device number 2 using xhci_hcd
>[    3.440148] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
>[    3.469506] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
>[    3.469508] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
>[    3.469592] sd 2:0:0:0: [sdb] Write Protect is off
>[    3.469596] sd 0:0:0:0: [sda] Write Protect is off
>[    3.469601] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    3.469602] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    3.469630] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.469631] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.471532]  sda: sda1 sda2
>[    3.471535]  sdb: sdb1 sdb2
>[    3.472092] sd 0:0:0:0: [sda] Attached SCSI disk
>[    3.472120] sd 2:0:0:0: [sdb] Attached SCSI disk
>[    3.535297] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
>[    3.591827] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    3.626598] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>[    3.627012] systemd[1]: Detected architecture x86-64.
>[    3.627826] systemd[1]: Set hostname to <intersect>.
>[    3.689421] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    3.689997] systemd[1]: Listening on Process Core Dump Socket.
>[    3.690012] systemd[1]: Reached target Encrypted Volumes.
>[    3.690323] systemd[1]: Created slice User and Session Slice.
>[    3.690359] systemd[1]: Listening on Journal Socket (/dev/log).
>[    3.690368] systemd[1]: Reached target Login Prompts.
>[    3.690405] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
>[    3.690416] systemd[1]: Reached target Remote File Systems.
>[    3.690439] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    3.690448] systemd[1]: Reached target Swap.
>[    3.690470] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    3.690492] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    3.690511] systemd[1]: Listening on udev Kernel Socket.
>[    3.690544] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    3.690553] systemd[1]: Reached target Paths.
>[    3.690642] systemd[1]: Created slice System Slice.
>[    3.690657] systemd[1]: Reached target Slices.
>[    3.690744] systemd[1]: Created slice system-getty.slice.
>[    3.690828] systemd[1]: Created slice system-systemd\x2dfsck.slice.
>[    3.690861] systemd[1]: Listening on Journal Socket.
>[    3.699370] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[    3.699655] systemd[1]: Mounting POSIX Message Queue File System...
>[    3.700698] systemd[1]: Mounting Configuration File System...
>[    3.701014] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    3.702594] systemd[1]: Mounting Temporary Directory...
>[    3.703317] systemd[1]: Mounting Huge Pages File System...
>[    3.703355] systemd[1]: Listening on udev Control Socket.
>[    3.703636] systemd[1]: Mounting Debug File System...
>[    3.703902] systemd[1]: Starting Setup Virtual Console...
>[    3.704214] systemd[1]: Starting Apply Kernel Variables...
>[    3.706383] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
>[    3.706627] systemd[1]: Starting Journal Service...
>[    3.707374] systemd[1]: Mounted Configuration File System.
>[    3.707388] systemd[1]: Mounted Debug File System.
>[    3.707395] systemd[1]: Mounted POSIX Message Queue File System.
>[    3.707402] systemd[1]: Mounted Huge Pages File System.
>[    3.707408] systemd[1]: Mounted Temporary Directory.
>[    3.707498] systemd[1]: Started Create list of required static device nodes for the current kernel.
>[    3.707646] systemd[1]: Started Remount Root and Kernel File Systems.
>[    3.710217] systemd[1]: Started Apply Kernel Variables.
>[    3.716247] systemd[1]: Starting Load/Save Random Seed...
>[    3.717068] systemd[1]: Starting udev Coldplug all Devices...
>[    3.717409] systemd[1]: Starting Create Static Device Nodes in /dev...
>[    3.720872] systemd[1]: Started Load/Save Random Seed.
>[    3.736280] systemd[1]: Started Create Static Device Nodes in /dev.
>[    3.736672] systemd[1]: Starting udev Kernel Device Manager...
>[    3.736681] systemd[1]: Reached target Local File Systems (Pre).
>[    3.740177] systemd[1]: Started udev Coldplug all Devices.
>[    3.761932] systemd[1]: Started Journal Service.
>[    3.762600] usb 1-9: new high-speed USB device number 3 using xhci_hcd
>[    3.766194] systemd-journald[231]: Received request to flush runtime journal from PID 1
>[    3.786573] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
>[    3.786576] ACPI: Power Button [PWRB]
>[    3.786618] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
>[    3.786619] ACPI: Sleep Button [SLPB]
>[    3.786657] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
>[    3.786690] ACPI: Lid Switch [LID0]
>[    3.786724] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
>[    3.786725] ACPI: Power Button [PWRF]
>[    3.787767] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
>[    3.789147] hidraw: raw HID events driver (C) Jiri Kosina
>[    3.792455] ACPI: AC Adapter [AC] (off-line)
>[    3.792540] wmi: Mapper loaded
>[    3.796610] Bluetooth: Core ver 2.21
>[    3.796619] NET: Registered protocol family 31
>[    3.796619] Bluetooth: HCI device and connection manager initialized
>[    3.796621] Bluetooth: HCI socket layer initialized
>[    3.796623] Bluetooth: L2CAP socket layer initialized
>[    3.796626] Bluetooth: SCO socket layer initialized
>[    3.801187] Bluetooth: HCI UART driver ver 2.3
>[    3.801188] Bluetooth: HCI UART protocol H4 registered
>[    3.801188] Bluetooth: HCI UART protocol BCSP registered
>[    3.801189] Bluetooth: HCI UART protocol LL registered
>[    3.801189] Bluetooth: HCI UART protocol ATH3K registered
>[    3.801190] Bluetooth: HCI UART protocol Three-wire (H5) registered
>[    3.801209] Bluetooth: HCI UART protocol Intel registered
>[    3.801219] Bluetooth: HCI UART protocol BCM registered
>[    3.801219] Bluetooth: HCI UART protocol QCA registered
>[    3.802161] ACPI: Battery Slot [BAT0] (battery present)
>[    3.803177] thermal LNXTHERM:00: registered as thermal_zone0
>[    3.803178] ACPI: Thermal Zone [TZ0] (54 C)
>[    3.806532] random: nonblocking pool is initialized
>[    3.806745] input: PC Speaker as /devices/platform/pcspkr/input/input9
>[    3.807053] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    3.809866] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
>[    3.812126] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    3.812131] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control
>[    3.817060] r8169 0000:02:00.1 eth0: RTL8411 at 0xffffc90001c4e000, 80:fa:5b:27:73:5d, XID 1c800800 IRQ 128
>[    3.817061] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    3.821824] AVX2 version of gcm_enc/dec engaged.
>[    3.821825] AES CTR mode by8 optimization enabled
>[    3.823398] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
>[    3.823399] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    3.826438] Intel(R) Wireless WiFi driver for Linux
>[    3.826438] Copyright(c) 2003- 2015 Intel Corporation
>[    3.840587] ------------[ cut here ]------------
>[    3.840591] WARNING: CPU: 6 PID: 115 at drivers/net/wireless/intel/iwlwifi/iwl-drv.c:1065 iwl_req_fw_callback+0x112b/0x1590 [iwlwifi]
>[    3.840592] GSCAN is supported but capabilities TLV is unavailable
>[    3.840610] Modules linked in: crc32_pclmul crc32c_intel ghash_clmulni_intel iwlwifi snd_hda_intel intel_gtt i2c_algo_bit aesni_intel snd_hda_codec aes_x86_64 lrw gf128mul snd_hda_core glue_helper cfg80211 ablk_helper snd_hwdep cryptd snd_pcm rtsx_pci_ms evdev input_leds memstick led_class snd_timer r8169 mac_hid snd i2c_i801 mii mei_me soundcore psmouse mei shpchp pcspkr serio_raw thermal battery hci_uart btbcm btqca btintel bluetooth pcc_cpufreq(-) acpi_cpufreq(-) wmi i2c_hid pinctrl_sunrisepoint tpm_tis pinctrl_intel intel_lpss_acpi rfkill tpm hid ac fjes intel_lpss processor acpi_pad video button sch_fq_codel ip_tables x_tables ext4 crc16 jbd2 mbcache sd_mod ahci libahci rtsx_pci_sdmmc xhci_pci atkbd libata xhci_hcd mmc_core libps2 usbcore rtsx_pci scsi_mod usb_common i8042 serio nvidia_drm(PO)
>[    3.840613]  drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm nvidia_uvm(PO) nvidia_modeset(PO) nvidia(PO)
>[    3.840614] CPU: 6 PID: 115 Comm: kworker/6:1 Tainted: P           O    4.6.0-rc5-mainline #1
>[    3.840615] Hardware name: Notebook                         P640RE/P640RE, BIOS 1.05.01 10/23/2015
>[    3.840618] Workqueue: events request_firmware_work_func
>[    3.840620]  0000000000000286 00000000925b350b ffff880480107c18 ffffffff812e27d1
>[    3.840621]  ffff880480107c68 0000000000000000 ffff880480107c58 ffffffff8107a5ab
>[    3.840622]  00000429ffffff0f ffff88047ed77000 ffffc90002c497cc 0000000000000000
>[    3.840622] Call Trace:
>[    3.840625]  [<ffffffff812e27d1>] dump_stack+0x63/0x82
>[    3.840627]  [<ffffffff8107a5ab>] __warn+0xcb/0xf0
>[    3.840628]  [<ffffffff8107a62f>] warn_slowpath_fmt+0x5f/0x80
>[    3.840630]  [<ffffffffa1311f5b>] iwl_req_fw_callback+0x112b/0x1590 [iwlwifi]
>[    3.840631]  [<ffffffff810927ca>] ? __queue_delayed_work+0x8a/0x190
>[    3.840633]  [<ffffffff814115af>] ? devres_add+0x5f/0x70
>[    3.840635]  [<ffffffff8108ef45>] ? usermodehelper_read_unlock+0x15/0x20
>[    3.840636]  [<ffffffff814218c6>] ? _request_firmware+0x4d6/0xb40
>[    3.840638]  [<ffffffff8142214f>] request_firmware_work_func+0x3f/0x80
>[    3.840639]  [<ffffffff810936ce>] process_one_work+0x14e/0x480
>[    3.840640]  [<ffffffff81093a48>] worker_thread+0x48/0x4e0
>[    3.840640]  [<ffffffff81093a00>] ? process_one_work+0x480/0x480
>[    3.840641]  [<ffffffff81093a00>] ? process_one_work+0x480/0x480
>[    3.840643]  [<ffffffff810995a8>] kthread+0xd8/0xf0
>[    3.840645]  [<ffffffff815bdcc2>] ret_from_fork+0x22/0x40
>[    3.840646]  [<ffffffff810994d0>] ? kthread_worker_fn+0x180/0x180
>[    3.840647] ---[ end trace e9862aac99599717 ]---
>[    3.841090] iwlwifi 0000:03:00.0: loaded firmware version 21.302800.0 op_mode iwlmvm
>[    3.842496] [drm:i915_dump_device_info] i915 device info: gen=9, pciid=0x191b rev=0x06 flags=need_gfx_hws,is_skylake,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    3.842496] [drm:intel_detect_pch] Found SunrisePoint PCH
>[    3.842755] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 131072K, usable: 130048K
>[    3.842755] [drm] Memory usable by graphics device = 4096M
>[    3.842756] [drm:i915_gem_gtt_init] GMADR size = 512M
>[    3.842756] [drm:i915_gem_gtt_init] GTT stolen size = 128M
>[    3.842756] [drm:i915_gem_gtt_init] ppgtt mode: 3
>[    3.842758] checking generic (a0000000 7f0000) vs hw (a0000000 20000000)
>[    3.842758] fb: switching to inteldrmfb from VESA VGA
>[    3.864227] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
>[    3.864296] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[    3.864597] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[    3.868812] r8169 0000:02:00.1 enp2s0f1: renamed from eth0
>[    3.871779] intel_rapl: Found RAPL domain package
>[    3.871780] intel_rapl: Found RAPL domain core
>[    3.871781] intel_rapl: Found RAPL domain uncore
>[    3.871783] intel_rapl: Found RAPL domain dram
>[    3.875536] Console: switching to colour dummy device 80x25
>[    3.875589] [drm] Replacing VGA console driver
>[    3.875849] [drm:intel_opregion_setup] graphic opregion physical addr: 0x5fb8c018
>[    3.875857] [drm:intel_opregion_setup] Public ACPI methods supported
>[    3.875858] [drm:intel_opregion_setup] SWSCI supported
>[    3.881276] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    3.881278] [drm:intel_opregion_setup] ASLE supported
>[    3.881279] [drm:intel_opregion_setup] ASLE extension supported
>[    3.881280] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    3.881627] [drm:intel_device_info_runtime_init] slice total: 1
>[    3.881628] [drm:intel_device_info_runtime_init] subslice total: 3
>[    3.881629] [drm:intel_device_info_runtime_init] subslice per slice: 3
>[    3.881630] [drm:intel_device_info_runtime_init] EU total: 24
>[    3.881631] [drm:intel_device_info_runtime_init] EU per subslice: 8
>[    3.881632] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    3.881633] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    3.881634] [drm:intel_device_info_runtime_init] has EU power gating: y
>[    3.881635] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    3.881636] [drm] Driver supports precise vblank timestamp query.
>[    3.881638] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    3.881639] [drm:intel_bios_init] VBT signature "$VBT SKYLAKE        ", BDB version 196
>[    3.881669] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    3.881670] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    3.881672] [drm:parse_lfp_panel_data] DRRS supported mode is seamless
>[    3.881673] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    3.881675] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x8 0xa
>[    3.881683] [drm:parse_lfp_panel_data] VBT initial LVDS value 20033c
>[    3.881685] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 450 Hz, active high, min brightness 15, level 80
>[    3.881686] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping.
>[    3.881687] [drm:parse_driver_features] DRRS State Enabled:0
>[    3.881688] [drm:parse_edp] VBT has unknown eDP link rate value 2
>[    3.881692] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    3.881693] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    3.881694] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    3.881695] [drm:parse_ddi_port] VBT HDMI level shift for port B: 8
>[    3.881696] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    3.881697] [drm:parse_ddi_port] VBT HDMI level shift for port C: 8
>[    3.881721] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    3.881750] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    3.881752] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    3.881775] [drm:intel_power_well_enable] enabling power well 1
>[    3.881777] [drm:intel_power_well_enable] enabling MISC IO power well
>[    3.881779] [drm:intel_power_well_enable] enabling always-on
>[    3.881780] [drm:intel_power_well_enable] enabling DC off
>[    3.881781] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    3.881782] [drm:intel_power_well_enable] enabling power well 2
>[    3.881784] [drm:intel_power_well_enable] enabling DDI A/E power well
>[    3.881785] [drm:intel_power_well_enable] enabling DDI B power well
>[    3.881786] [drm:skl_set_power_well] Enabling DDI B power well
>[    3.881787] [drm:intel_power_well_enable] enabling DDI C power well
>[    3.881788] [drm:skl_set_power_well] Enabling DDI C power well
>[    3.881789] [drm:intel_power_well_enable] enabling DDI D power well
>[    3.881790] [drm:skl_set_power_well] Enabling DDI D power well
>[    3.881791] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    3.881796] [drm:intel_csr_ucode_init] Loading i915/skl_dmc_ver1.bin
>[    3.882685] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
>[    3.885924] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 2 (2.0 usec)
>[    3.885953] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 19 (19.0 usec)
>[    3.885955] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 28 (28.0 usec)
>[    3.885957] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 32 (32.0 usec)
>[    3.885958] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 63 (63.0 usec)
>[    3.885959] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 77 (77.0 usec)
>[    3.885979] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 83 (83.0 usec)
>[    3.885980] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 99 (99.0 usec)
>[    3.885982] [drm:intel_modeset_init] 3 display pipes available.
>[    3.885996] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz
>[    3.885997] [drm:intel_update_max_cdclk] Max CD clock rate: 675000 kHz
>[    3.885998] [drm:intel_update_max_cdclk] Max dotclock rate: 675000 kHz
>[    3.886320] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    3.886452] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 4000
>[    3.886454] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 200 t9 2000 t10 500 t11_t12 3000
>[    3.886473] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 400
>[    3.886474] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 20, off delay 200
>[    3.886476] [drm:intel_dp_aux_init] registering DPDDC-A bus for card1-eDP-1
>[    3.886512] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    3.886569] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    3.886965] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[    3.887256] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel.
>[    3.887257] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
>[    3.887540] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    3.887541] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    3.887542] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    3.887608] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af04
>[    3.890943] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.890945] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[    3.890990] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 130/416
>[    3.891005] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    3.891046] [drm:intel_dp_aux_init] registering DPDDC-B bus for card1-DP-2
>[    3.891122] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: enabled
>[    3.891124] [drm:intel_modeset_readout_hw_state] [CRTC:30] hw state readout: disabled
>[    3.891125] [drm:intel_modeset_readout_hw_state] [CRTC:34] hw state readout: disabled
>[    3.891127] [drm:intel_modeset_readout_hw_state] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    3.891128] [drm:intel_modeset_readout_hw_state] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    3.891129] [drm:intel_modeset_readout_hw_state] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>[    3.891133] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: enabled, pipe A
>[    3.891135] [drm:intel_modeset_readout_hw_state] [ENCODER:44:TMDS-44] hw state readout: disabled, pipe A
>[    3.891136] [drm:intel_modeset_readout_hw_state] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe A
>[    3.891136] [drm:intel_modeset_readout_hw_state] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe B
>[    3.891137] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP MST-48] hw state readout: disabled, pipe C
>[    3.891138] [drm:intel_modeset_readout_hw_state] [ENCODER:51:TMDS-51] hw state readout: disabled, pipe A
>[    3.891140] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:eDP-1] hw state readout: enabled
>[    3.891142] [drm:intel_modeset_readout_hw_state] [CONNECTOR:45:DP-2] hw state readout: disabled
>[    3.891143] [drm:intel_modeset_readout_hw_state] [CONNECTOR:49:HDMI-A-1] hw state readout: disabled
>[    3.891144] [drm:intel_modeset_readout_hw_state] [CONNECTOR:52:HDMI-A-2] hw state readout: disabled
>[    3.891151] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff8804826fe400 for pipe A
>[    3.891152] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    3.891153] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[    3.891154] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.891155] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4896849, gmch_n: 8388608, link_m: 272047, link_n: 524288, tu: 64
>[    3.891156] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.891157] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.891157] [drm:intel_dump_pipe_config] requested mode:
>[    3.891159] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 140099 1920 1980 2016 2092 1080 1083 1088 1116 0x40 0x9
>[    3.891160] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.891161] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 140099 1920 1980 2016 2092 1080 1083 1088 1116 0x40 0x9
>[    3.891162] [drm:intel_dump_crtc_timings] crtc timings: 140099 1920 1980 2016 2092 1080 1083 1088 1116, type: 0x40 flags: 0x9
>[    3.891163] [drm:intel_dump_pipe_config] port clock: 270000
>[    3.891163] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    3.891164] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    3.891165] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.891166] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    3.891167] [drm:intel_dump_pipe_config] ips: 0
>[    3.891168] [drm:intel_dump_pipe_config] double wide: 0
>[    3.891168] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[    3.891169] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.891170] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1
>[    3.891171] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    3.891172] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1
>[    3.891174] [drm:intel_dump_pipe_config] [CRTC:30][setup_hw_state] config ffff8804826fdc00 for pipe B
>[    3.891174] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    3.891175] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    3.891176] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.891177] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.891178] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.891179] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.891179] [drm:intel_dump_pipe_config] requested mode:
>[    3.891180] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.891181] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.891182] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.891183] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.891184] [drm:intel_dump_pipe_config] port clock: 0
>[    3.891185] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    3.891185] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[    3.891186] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.891187] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.891188] [drm:intel_dump_pipe_config] ips: 0
>[    3.891188] [drm:intel_dump_pipe_config] double wide: 0
>[    3.891189] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    3.891190] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.891191] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = -1
>[    3.891192] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = -1
>[    3.891192] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = -1
>[    3.891194] [drm:intel_dump_pipe_config] [CRTC:34][setup_hw_state] config ffff8804826fd000 for pipe C
>[    3.891194] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    3.891195] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    3.891196] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.891197] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.891198] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.891198] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.891199] [drm:intel_dump_pipe_config] requested mode:
>[    3.891200] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.891201] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.891202] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.891203] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.891203] [drm:intel_dump_pipe_config] port clock: 0
>[    3.891204] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    3.891205] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[    3.891206] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.891206] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.891207] [drm:intel_dump_pipe_config] ips: 0
>[    3.891208] [drm:intel_dump_pipe_config] double wide: 0
>[    3.891208] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    3.891209] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.891210] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 2.0 idx: 6 disabled, scaler_id = -1
>[    3.891211] [drm:intel_dump_pipe_config] CURSOR PLANE:33 plane: 2.3 idx: 7 disabled, scaler_id = -1
>[    3.891212] [drm:intel_dump_pipe_config] STANDARD PLANE:35 plane: 2.1 idx: 8 disabled, scaler_id = -1
>[    3.891229] [drm:intel_power_well_disable] disabling DDI D power well
>[    3.891231] [drm:skl_set_power_well] Disabling DDI D power well
>[    3.891232] [drm:intel_power_well_disable] disabling DDI C power well
>[    3.891233] [drm:skl_set_power_well] Disabling DDI C power well
>[    3.891233] [drm:intel_power_well_disable] disabling DDI B power well
>[    3.891235] [drm:skl_set_power_well] Disabling DDI B power well
>[    3.891235] [drm:intel_power_well_disable] disabling power well 2
>[    3.891239] [drm:skl_set_power_well] Disabling power well 2
>[    3.891242] [drm:skylake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    3.891243] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    3.891246] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    3.891248] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880481264000
>[    3.891478] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    3.891479] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    3.892509] [drm:i915_gem_context_init] LR context support initialized
>[    3.892516] [drm:intel_init_pipe_control] render ring pipe control offset: 0x007e9000
>[    3.892594] [drm:gen8_init_common_ring] Execlists enabled for render ring
>[    3.892633] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
>[    3.892640] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
>[    3.892645] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
>[    3.892675] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz
>[    3.892712] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    3.892714] [drm:intel_fbdev_init_bios] found possible fb from plane A
>[    3.892714] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[    3.892740] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping
>[    3.892740] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
>[    3.892741] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    3.892742] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400)
>[    3.892744] [drm:intel_fbdev_init_bios] pipe B not active, skipping
>[    3.892744] [drm:intel_fbdev_init_bios] pipe C not active, skipping
>[    3.892745] [drm:intel_fbdev_init_bios] using BIOS fb for initial console
>[    3.892857] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    3.892859] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    3.893157] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    3.893453] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    3.893799] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI
>[    3.894157] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] status updated from unknown to connected
>[    3.894164] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.894166] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    3.894168] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[    3.894169] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2]
>[    3.894170] [drm:intel_dp_detect] [CONNECTOR:45:DP-2]
>[    3.894171] [drm:intel_power_well_enable] enabling power well 2
>[    3.894172] [drm:skl_set_power_well] Enabling power well 2
>[    3.894183] [drm:intel_power_well_disable] disabling power well 2
>[    3.894187] [drm:skl_set_power_well] Disabling power well 2
>[    3.894188] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2] status updated from unknown to disconnected
>[    3.894188] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2] disconnected
>[    3.894190] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[    3.894190] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[    3.895819] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.896146] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
>[    3.896208] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20160108/video-1241)
>[    3.896210] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
>[    3.896238] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input13
>[    3.911300] Non-volatile memory driver v1.3
>[    3.915366] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: data=ordered
>[    4.030376] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    4.030685] thermal thermal_zone2: failed to read out thermal zone (-5)
>[    4.031409] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
>[    4.159138] ahci 0000:00:17.0: port does not support device sleep
>[    4.159560] ahci 0000:00:17.0: port does not support device sleep
>[    4.162614] [drm:intel_hdmi_detect] Live status not up!
>[    4.162622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] status updated from unknown to disconnected
>[    4.162628] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[    4.162632] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2]
>[    4.162634] [drm:intel_hdmi_detect] [CONNECTOR:52:HDMI-A-2]
>[    4.339270] [drm:intel_hdmi_detect] Live status not up!
>[    4.339274] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2] status updated from unknown to disconnected
>[    4.339276] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2] disconnected
>[    4.339294] [drm:drm_setup_crtcs] 
>[    4.339296] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    4.339296] [drm:drm_enable_connectors] connector 45 enabled? no
>[    4.339297] [drm:drm_enable_connectors] connector 49 enabled? no
>[    4.339298] [drm:drm_enable_connectors] connector 52 enabled? no
>[    4.339299] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    4.339300] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    4.339301] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    4.339302] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    4.339303] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    4.339322] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    4.339323] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    4.339325] [drm:intelfb_create] re-using BIOS fb
>[    4.339351] [drm:drm_fb_helper_hotplug_event] 
>[    4.339373] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    4.339374] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo ffff880481264000
>[    4.339377] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    4.339434] fbcon: inteldrmfb (fb0) is primary device
>[    4.365871] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    4.387533] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    4.387963] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    4.387964] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    4.387966] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[    4.387966] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2]
>[    4.387967] [drm:intel_dp_detect] [CONNECTOR:45:DP-2]
>[    4.387967] [drm:intel_power_well_enable] enabling power well 2
>[    4.387968] [drm:skl_set_power_well] Enabling power well 2
>[    4.387979] [drm:intel_power_well_disable] disabling power well 2
>[    4.387982] [drm:skl_set_power_well] Disabling power well 2
>[    4.387983] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2] disconnected
>[    4.387983] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[    4.387984] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[    4.528806] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[    4.528904] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[    4.529176] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[    4.575916] [drm:intel_hdmi_detect] Live status not up!
>[    4.575916] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[    4.575918] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2]
>[    4.575918] [drm:intel_hdmi_detect] [CONNECTOR:52:HDMI-A-2]
>[    4.662018] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[    4.662281] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[    4.682551] [drm:intel_hdmi_detect] Live status not up!
>[    4.682551] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2] disconnected
>[    4.682555] [drm:drm_setup_crtcs] 
>[    4.682574] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    4.682575] [drm:drm_enable_connectors] connector 45 enabled? no
>[    4.682575] [drm:drm_enable_connectors] connector 49 enabled? no
>[    4.682575] [drm:drm_enable_connectors] connector 52 enabled? no
>[    4.682577] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    4.682577] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    4.682578] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    4.682579] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    4.682579] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    4.682580] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    4.682580] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    4.682594] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[    4.682594] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18
>[    4.682596] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31
>[    4.682597] [drm:skl_update_scaler] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    4.682598] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 140100KHz
>[    4.682599] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
>[    4.682599] [drm:intel_dp_compute_config] DP link bw required 252180 available 432000
>[    4.682600] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[    4.682601] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88047edc4400 for pipe A
>[    4.682602] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    4.682602] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[    4.682603] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.682603] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4896849, gmch_n: 8388608, link_m: 272047, link_n: 524288, tu: 64
>[    4.682604] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    4.682604] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    4.682605] [drm:intel_dump_pipe_config] requested mode:
>[    4.682606] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[    4.682606] [drm:intel_dump_pipe_config] adjusted mode:
>[    4.682607] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[    4.682608] [drm:intel_dump_crtc_timings] crtc timings: 140100 1920 1980 2016 2092 1080 1083 1088 1116, type: 0x48 flags: 0x9
>[    4.682621] [drm:intel_dump_pipe_config] port clock: 270000
>[    4.682622] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    4.682622] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    4.682623] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.682623] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    4.682623] [drm:intel_dump_pipe_config] ips: 0
>[    4.682624] [drm:intel_dump_pipe_config] double wide: 0
>[    4.682624] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[    4.682624] [drm:intel_dump_pipe_config] planes on this crtc
>[    4.682625] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
>[    4.682626] [drm:intel_dump_pipe_config] 	FB:54, fb = 1920x1080 format = 0x34325258
>[    4.682626] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080
>[    4.682627] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    4.682628] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1
>[    4.682629] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    4.682630] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31
>[    4.682639] [drm:intel_edp_backlight_off] 
>[    4.740572] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[    4.743306] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
>[    4.761452] r8169 0000:02:00.1 enp2s0f1: link down
>[    4.761499] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
>[    4.885910] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    4.885938] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling
>[    4.885968] [drm:intel_disable_pipe] disabling pipe A
>[    4.891629] [drm:edp_panel_off] Turn eDP port A panel power off
>[    4.891651] [drm:wait_panel_off] Wait for panel power off time
>[    4.891679] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    4.944128] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[    4.944129] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    4.944130] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0
>[    4.944167] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[    4.949212] [drm:wait_panel_status] Wait complete
>[    4.949228] [drm:edp_panel_on] Turn eDP port A panel power on
>[    4.949234] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    5.005133] usbcore: registered new interface driver btusb
>[    5.006024] Bluetooth: hci0: Firmware revision 0.0 build 90 week 25 2015
>[    5.015274] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[    5.017467] psmouse serio2: synaptics: queried max coordinates: x [..5654], y [..4716]
>[    5.103281] media: Linux media interface: v0.10
>[    5.107831] Linux video capture interface: v2.00
>[    5.112781] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:066d)
>[    5.115259] uvcvideo 1-9:1.0: Entity type for entity Extension 4 was not initialized!
>[    5.115260] uvcvideo 1-9:1.0: Entity type for entity Processing 2 was not initialized!
>[    5.115261] uvcvideo 1-9:1.0: Entity type for entity Camera 1 was not initialized!
>[    5.115359] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input14
>[    5.115408] usbcore: registered new interface driver uvcvideo
>[    5.115409] USB Video Class driver (1.1.1)
>[    5.134616] psmouse serio2: synaptics: queried min coordinates: x [1326..], y [1228..]
>[    5.293148] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x0, board id: 3163, fw id: 1924066
>[    5.295989] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    5.296001] [drm:wait_panel_status] Wait complete
>[    5.296034] [drm:wait_panel_on] Wait for panel power on
>[    5.296050] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd0003
>[    5.330881] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[    5.330885] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    5.330887] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1
>[    5.330950] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[    5.337816] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
>[    5.339428] [drm] RC6 on
>[    5.342171] mousedev: PS/2 mouse device common for all mice
>[    5.496371] [drm:wait_panel_status] Wait complete
>[    5.496387] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    5.496434] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    5.497527] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    5.497529] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    5.497531] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    5.498150] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[    5.499068] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[    5.499227] [drm:skylake_pfit_enable] for crtc_state = ffff88047edc4400
>[    5.499327] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[    5.499331] [drm:intel_enable_pipe] enabling pipe A
>[    5.499340] [drm:intel_edp_backlight_on] 
>[    5.499342] [drm:intel_panel_enable_backlight] pipe A
>[    5.499381] [drm:intel_panel_actually_set_backlight] set backlight PWM = 130
>[    5.519205] [drm:intel_psr_match_conditions] PSR disable by flag
>[    5.519207] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[    5.532843] [drm:intel_connector_check_state] [CONNECTOR:37:eDP-1]
>[    5.532849] [drm:check_encoder_state] [ENCODER:36:TMDS-36]
>[    5.532852] [drm:check_encoder_state] [ENCODER:44:TMDS-44]
>[    5.532854] [drm:check_encoder_state] [ENCODER:46:DP MST-46]
>[    5.532856] [drm:check_encoder_state] [ENCODER:47:DP MST-47]
>[    5.532857] [drm:check_encoder_state] [ENCODER:48:DP MST-48]
>[    5.532858] [drm:check_encoder_state] [ENCODER:51:TMDS-51]
>[    5.532863] [drm:check_crtc_state] [CRTC:26]
>[    5.532882] [drm:check_shared_dpll_state] DPLL 1
>[    5.532884] [drm:check_shared_dpll_state] DPLL 2
>[    5.532886] [drm:check_shared_dpll_state] DPLL 3
>[    5.532939] [drm:drm_fb_helper_hotplug_event] 
>[    5.532941] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    5.532943] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    5.533283] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    5.533606] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    5.534085] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    5.534090] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    5.534094] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[    5.534096] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2]
>[    5.534097] [drm:intel_dp_detect] [CONNECTOR:45:DP-2]
>[    5.534099] [drm:intel_power_well_enable] enabling power well 2
>[    5.534102] [drm:skl_set_power_well] Enabling power well 2
>[    5.534118] [drm:intel_power_well_disable] disabling power well 2
>[    5.534126] [drm:skl_set_power_well] Disabling power well 2
>[    5.534128] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2] disconnected
>[    5.534130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[    5.534131] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[    5.639280] [drm:intel_hdmi_detect] Live status not up!
>[    5.639281] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[    5.639285] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2]
>[    5.639286] [drm:intel_hdmi_detect] [CONNECTOR:52:HDMI-A-2]
>[    5.745938] [drm:intel_hdmi_detect] Live status not up!
>[    5.745939] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2] disconnected
>[    5.745949] [drm:drm_setup_crtcs] 
>[    5.745953] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    5.745954] [drm:drm_enable_connectors] connector 45 enabled? no
>[    5.745956] [drm:drm_enable_connectors] connector 49 enabled? no
>[    5.745957] [drm:drm_enable_connectors] connector 52 enabled? no
>[    5.745960] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    5.745962] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    5.745965] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    5.745966] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    5.745968] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    5.745969] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    5.745971] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    5.746009] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    5.746230] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    5.746235] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    5.746238] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 1
>[    5.746412] Console: switching to colour frame buffer device 240x67
>[    5.746440] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    5.753532] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    5.755500] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    5.769452] [drm:intel_power_well_enable] enabling power well 2
>[    5.769455] [drm:skl_set_power_well] Enabling power well 2
>[    5.790614] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line
>[    5.790617] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[    5.790618] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    5.790619] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    5.790620] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
>[    5.790621] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    5.790622] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[    5.790623] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
>[    5.797559] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=36/416
>[    5.797562] [drm:intel_panel_actually_set_backlight] set backlight PWM = 58
>[    5.804429] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
>[    5.804906] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
>[    5.804966] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
>[    5.805021] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
>[    5.805090] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
>[    5.805146] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
>[    5.805206] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
>[    5.805242] [drm:intel_power_well_disable] disabling power well 2
>[    5.805248] [drm:skl_set_power_well] Disabling power well 2
>[    5.827897] [drm:drm_mode_getresources] CRTC[4] CONNECTORS[1] ENCODERS[2]
>[    5.864055] [drm:i915_gem_open] 
>[    5.864123] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[    5.864229] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    5.886205] [drm:i915_gem_open] 
>[    5.905247] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[    5.967782] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[    5.967806] [drm:drm_mode_addfb2] [FB:55]
>[    5.968140] [drm:internal_framebuffer_create] could not create framebuffer
>[    5.968143] [drm:drm_mode_addfb2] [FB:55]
>[    5.968148] [drm:drm_mode_addfb2] [FB:55]
>[    5.968191] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[    5.968193] [drm:drm_mode_getresources] [CRTC:26:crtc-0]
>[    5.968193] [drm:drm_mode_getresources] [CRTC:30:crtc-1]
>[    5.968194] [drm:drm_mode_getresources] [CRTC:34:crtc-2]
>[    5.968195] [drm:drm_mode_getresources] [ENCODER:36:TMDS-36]
>[    5.968195] [drm:drm_mode_getresources] [ENCODER:44:TMDS-44]
>[    5.968196] [drm:drm_mode_getresources] [ENCODER:46:DP MST-46]
>[    5.968197] [drm:drm_mode_getresources] [ENCODER:47:DP MST-47]
>[    5.968198] [drm:drm_mode_getresources] [ENCODER:48:DP MST-48]
>[    5.968198] [drm:drm_mode_getresources] [ENCODER:51:TMDS-51]
>[    5.968199] [drm:drm_mode_getresources] [CONNECTOR:37:eDP-1]
>[    5.968200] [drm:drm_mode_getresources] [CONNECTOR:45:DP-2]
>[    5.968200] [drm:drm_mode_getresources] [CONNECTOR:49:HDMI-A-1]
>[    5.968201] [drm:drm_mode_getresources] [CONNECTOR:52:HDMI-A-2]
>[    5.968201] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[    5.968256] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[    5.968263] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[    5.979167] [drm:drm_mode_getconnector] [CONNECTOR:45:?]
>[    5.979186] [drm:drm_mode_getconnector] [CONNECTOR:45:?]
>[    5.979225] [drm:drm_mode_getconnector] [CONNECTOR:49:?]
>[    5.979227] [drm:drm_mode_getconnector] [CONNECTOR:49:?]
>[    5.979247] [drm:drm_mode_getconnector] [CONNECTOR:52:?]
>[    5.979248] [drm:drm_mode_getconnector] [CONNECTOR:52:?]
>[    6.001310] [drm:drm_mode_addfb2] [FB:55]
>[    6.075877] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[    6.075899] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[    6.075913] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    6.177919] [drm:i915_gem_open] 
>[    6.252152] [drm:i915_gem_open] 
>[    6.272869] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    6.275859] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[    6.391773] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[    6.391778] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    6.391781] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    6.392104] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    6.392410] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    6.392853] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    6.392856] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    6.392860] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[    6.392866] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[    6.393072] [drm:drm_mode_getconnector] [CONNECTOR:45:?]
>[    6.393075] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2]
>[    6.393076] [drm:intel_dp_detect] [CONNECTOR:45:DP-2]
>[    6.393079] [drm:intel_power_well_enable] enabling power well 2
>[    6.393082] [drm:skl_set_power_well] Enabling power well 2
>[    6.393095] [drm:intel_power_well_disable] disabling power well 2
>[    6.393101] [drm:skl_set_power_well] Disabling power well 2
>[    6.393103] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2] disconnected
>[    6.393107] [drm:drm_mode_getconnector] [CONNECTOR:49:?]
>[    6.393109] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[    6.393111] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[    6.499200] [drm:intel_hdmi_detect] Live status not up!
>[    6.499211] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[    6.499257] [drm:drm_mode_getconnector] [CONNECTOR:52:?]
>[    6.499263] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2]
>[    6.499266] [drm:intel_hdmi_detect] [CONNECTOR:52:HDMI-A-2]
>[    6.605845] [drm:intel_hdmi_detect] Live status not up!
>[    6.605856] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2] disconnected
>[    6.608462] [drm:i915_gem_open] 
>[    6.620575] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    6.621466] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[    6.622212] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    7.057043] [drm:intel_power_well_enable] enabling power well 2
>[    7.057052] [drm:skl_set_power_well] Enabling power well 2
>[    7.062940] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    7.069209] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    7.072126] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    7.079145] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    7.081817] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    7.089165] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    7.091858] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    7.099144] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    7.102019] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    7.109164] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    7.111789] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    7.119141] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    7.121830] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    7.129164] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    7.132042] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    7.139140] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    7.141770] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    7.149160] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    7.315524] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[    7.889878] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[    8.085458] [drm:drm_mode_addfb2] [FB:57]
>[    8.122917] [drm:drm_mode_addfb2] [FB:59]
>[    8.137777] [drm:drm_mode_addfb2] [FB:60]
>[    8.299145] [drm:intel_power_well_disable] disabling power well 2
>[    8.299170] [drm:skl_set_power_well] Disabling power well 2
>[    8.395592] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    8.395637] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    8.395641] [drm:intel_power_well_disable] disabling DC off
>[    8.395648] [drm:skl_enable_dc6] Enabling DC6
>[    8.395652] [drm:gen9_set_dc_state] Setting DC state from 00 to 02
>[    8.477650] wlp3s0: authenticate with ec:08:6b:20:0e:b4
>[    8.487285] wlp3s0: send auth to ec:08:6b:20:0e:b4 (try 1/3)
>[    8.494847] wlp3s0: authenticated
>[    8.498817] wlp3s0: associate with ec:08:6b:20:0e:b4 (try 1/3)
>[    8.502483] wlp3s0: RX AssocResp from ec:08:6b:20:0e:b4 (capab=0x431 status=0 aid=2)
>[    8.514159] wlp3s0: associated
>[    8.514210] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[   11.648162] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[   11.650657] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[   11.650715] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[   11.677984] [drm:drm_mode_getresources] CRTC[4] CONNECTORS[1] ENCODERS[2]
>[   11.721158] [drm:i915_gem_open] 
>[   11.721231] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[   11.727210] [drm:i915_gem_open] 
>[   11.729862] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[   11.766528] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[   11.766537] [drm:drm_mode_addfb2] [FB:53]
>[   11.766848] [drm:internal_framebuffer_create] could not create framebuffer
>[   11.766851] [drm:drm_mode_addfb2] [FB:53]
>[   11.766855] [drm:drm_mode_addfb2] [FB:53]
>[   11.766879] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[   11.766881] [drm:drm_mode_getresources] [CRTC:26:crtc-0]
>[   11.766882] [drm:drm_mode_getresources] [CRTC:30:crtc-1]
>[   11.766882] [drm:drm_mode_getresources] [CRTC:34:crtc-2]
>[   11.766883] [drm:drm_mode_getresources] [ENCODER:36:TMDS-36]
>[   11.766884] [drm:drm_mode_getresources] [ENCODER:44:TMDS-44]
>[   11.766885] [drm:drm_mode_getresources] [ENCODER:46:DP MST-46]
>[   11.766885] [drm:drm_mode_getresources] [ENCODER:47:DP MST-47]
>[   11.766886] [drm:drm_mode_getresources] [ENCODER:48:DP MST-48]
>[   11.766886] [drm:drm_mode_getresources] [ENCODER:51:TMDS-51]
>[   11.766887] [drm:drm_mode_getresources] [CONNECTOR:37:eDP-1]
>[   11.766888] [drm:drm_mode_getresources] [CONNECTOR:45:DP-2]
>[   11.766889] [drm:drm_mode_getresources] [CONNECTOR:49:HDMI-A-1]
>[   11.766889] [drm:drm_mode_getresources] [CONNECTOR:52:HDMI-A-2]
>[   11.766890] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6]
>[   11.766944] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   11.766950] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   11.778616] [drm:drm_mode_getconnector] [CONNECTOR:45:?]
>[   11.778641] [drm:drm_mode_getconnector] [CONNECTOR:45:?]
>[   11.778676] [drm:drm_mode_getconnector] [CONNECTOR:49:?]
>[   11.778678] [drm:drm_mode_getconnector] [CONNECTOR:49:?]
>[   11.778698] [drm:drm_mode_getconnector] [CONNECTOR:52:?]
>[   11.778700] [drm:drm_mode_getconnector] [CONNECTOR:52:?]
>[   11.789626] [drm:drm_mode_addfb2] [FB:53]
>[   11.858023] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[   11.858035] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[   11.858061] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[   11.861452] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[   12.007670] [drm:i915_gem_open] 
>[   12.053070] [drm:i915_gem_open] 
>[   12.062275] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[   12.063100] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[   12.124817] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   12.124820] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[   12.124821] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[   12.124823] [drm:intel_power_well_enable] enabling DC off
>[   12.124826] [drm:gen9_set_dc_state] Setting DC state from 02 to 00
>[   12.124838] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   12.124883] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   12.125190] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[   12.125490] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[   12.125924] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   12.125926] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[   12.125928] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 140100 1920 1980 2016 2092 1080 1083 1088 1116 0x48 0x9
>[   12.125931] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   12.126071] [drm:drm_mode_getconnector] [CONNECTOR:45:?]
>[   12.126072] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2]
>[   12.126073] [drm:intel_dp_detect] [CONNECTOR:45:DP-2]
>[   12.126074] [drm:intel_power_well_enable] enabling power well 2
>[   12.126076] [drm:skl_set_power_well] Enabling power well 2
>[   12.126090] [drm:intel_power_well_disable] disabling power well 2
>[   12.126102] [drm:skl_set_power_well] Disabling power well 2
>[   12.126103] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-2] disconnected
>[   12.126107] [drm:drm_mode_getconnector] [CONNECTOR:49:?]
>[   12.126108] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[   12.126109] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[   12.231911] [drm:intel_hdmi_detect] Live status not up!
>[   12.231919] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[   12.231948] [drm:drm_mode_getconnector] [CONNECTOR:52:?]
>[   12.231952] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2]
>[   12.231955] [drm:intel_hdmi_detect] [CONNECTOR:52:HDMI-A-2]
>[   12.338651] [drm:intel_hdmi_detect] Live status not up!
>[   12.338662] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:HDMI-A-2] disconnected
>[   12.342209] [drm:i915_gem_open] 
>[   12.363715] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[   12.365661] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[   12.367584] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[   12.421689] fuse init (API version 7.24)
>[   12.512866] [drm:intel_power_well_enable] enabling power well 2
>[   12.512871] [drm:skl_set_power_well] Enabling power well 2
>[   12.518963] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[   12.525383] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[   12.528220] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[   12.535363] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[   12.538135] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[   12.545295] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[   12.548025] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[   12.555361] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[   12.558175] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[   12.565360] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[   12.568106] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[   12.575292] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[   12.578022] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[   12.585359] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[   12.588172] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[   12.595290] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[   12.597958] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[   12.605356] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[   12.706661] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[   13.373490] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[   13.545371] [drm:drm_mode_addfb2] [FB:61]
>[   13.750067] [drm:drm_mode_addfb2] [FB:63]
>[   13.808810] [drm:drm_mode_addfb2] [FB:64]
>[   14.027127] [drm:i915_gem_open] 
>[   14.128333] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[   14.128400] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   14.338523] [drm:intel_power_well_disable] disabling power well 2
>[   14.338534] [drm:skl_set_power_well] Disabling power well 2
>[   14.338535] [drm:intel_power_well_disable] disabling DC off
>[   14.338538] [drm:skl_enable_dc6] Enabling DC6
>[   14.338539] [drm:gen9_set_dc_state] Setting DC state from 00 to 02
>[   16.351957] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[   34.575610] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[   46.515092] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[   46.562178] ------------[ cut here ]------------
>[   46.562226] WARNING: CPU: 5 PID: 818 at drivers/gpu/drm/i915/intel_uncore.c:649 __unclaimed_reg_debug+0x80/0x90 [i915]
>[   46.562231] Unclaimed register detected after reading register 0x65f10
>[   46.562233] Modules linked in: fuse sha256_ssse3 sha256_generic hmac drbg ansi_cprng ctr ccm snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev mousedev uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev media btusb btrtl arc4 nvram msr intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp iwlmvm kvm_intel mxm_wmi kvm mac80211 irqbypass crct10dif_pclmul crc32_pclmul i915 crc32c_intel ghash_clmulni_intel iwlwifi snd_hda_intel intel_gtt i2c_algo_bit aesni_intel snd_hda_codec aes_x86_64 lrw gf128mul snd_hda_core glue_helper cfg80211 ablk_helper snd_hwdep cryptd snd_pcm rtsx_pci_ms evdev input_leds memstick led_class snd_timer r8169 mac_hid snd i2c_i801 mii mei_me soundcore psmouse mei shpchp pcspkr serio_raw thermal battery hci_uart btbcm btqca
>[   46.562330]  btintel bluetooth wmi i2c_hid pinctrl_sunrisepoint tpm_tis pinctrl_intel intel_lpss_acpi rfkill tpm hid ac fjes intel_lpss processor acpi_pad video button sch_fq_codel ip_tables x_tables ext4 crc16 jbd2 mbcache sd_mod ahci libahci rtsx_pci_sdmmc xhci_pci atkbd libata xhci_hcd mmc_core libps2 usbcore rtsx_pci scsi_mod usb_common i8042 serio nvidia_drm(PO) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm nvidia_uvm(PO) nvidia_modeset(PO) nvidia(PO)
>[   46.562391] CPU: 5 PID: 818 Comm: alsa-sink-ALC89 Tainted: P        W  O    4.6.0-rc5-mainline #1
>[   46.562394] Hardware name: Notebook                         P640RE/P640RE, BIOS 1.05.01 10/23/2015
>[   46.562398]  0000000000000086 00000000fd0536c9 ffff88046ca877b8 ffffffff812e27d1
>[   46.562405]  ffff88046ca87808 0000000000000000 ffff88046ca877f8 ffffffff8107a5ab
>[   46.562411]  00000289854ccd48 0000000000000000 0000000000000001 0000000000065f10
>[   46.562417] Call Trace:
>[   46.562427]  [<ffffffff812e27d1>] dump_stack+0x63/0x82
>[   46.562434]  [<ffffffff8107a5ab>] __warn+0xcb/0xf0
>[   46.562438]  [<ffffffff8107a62f>] warn_slowpath_fmt+0x5f/0x80
>[   46.562446]  [<ffffffff81490ce8>] ? pci_conf1_write+0xb8/0xf0
>[   46.562479]  [<ffffffffa13aa220>] __unclaimed_reg_debug+0x80/0x90 [i915]
>[   46.562510]  [<ffffffffa13aacce>] gen9_read32+0x33e/0x3b0 [i915]
>[   46.562544]  [<ffffffffa13b4c99>] i915_audio_component_codec_wake_override+0x39/0xb0 [i915]
>[   46.562553]  [<ffffffffa104dcbf>] snd_hdac_set_codec_wakeup+0x3f/0xa0 [snd_hda_core]
>[   46.562559]  [<ffffffffa119a578>] azx_runtime_resume+0x1a8/0x1d0 [snd_hda_intel]
>[   46.562566]  [<ffffffff8132a1eb>] pci_pm_runtime_resume+0x7b/0xa0
>[   46.562572]  [<ffffffff8132a170>] ? pci_restore_standard_config+0x40/0x40
>[   46.562578]  [<ffffffff81417cd2>] __rpm_callback+0x32/0x70
>[   46.562584]  [<ffffffff8132a170>] ? pci_restore_standard_config+0x40/0x40
>[   46.562588]  [<ffffffff81417d34>] rpm_callback+0x24/0x80
>[   46.562593]  [<ffffffff8132a170>] ? pci_restore_standard_config+0x40/0x40
>[   46.562598]  [<ffffffff81419149>] rpm_resume+0x4a9/0x6c0
>[   46.562606]  [<ffffffff810e006b>] ? rcu_report_unblock_qs_rnp+0x2b/0x90
>[   46.562611]  [<ffffffff81418ff5>] rpm_resume+0x355/0x6c0
>[   46.562617]  [<ffffffff8141939f>] __pm_runtime_resume+0x3f/0x60
>[   46.562624]  [<ffffffffa1047ec3>] snd_hdac_power_up+0x13/0x20 [snd_hda_core]
>[   46.562634]  [<ffffffffa11bf0e1>] azx_pcm_open+0x1d1/0x390 [snd_hda_codec]
>[   46.562644]  [<ffffffffa10bbf7b>] snd_pcm_open_substream+0x7b/0x130 [snd_pcm]
>[   46.562652]  [<ffffffffa10bc0e7>] snd_pcm_open+0xb7/0x240 [snd_pcm]
>[   46.562660]  [<ffffffff810a382d>] ? ttwu_do_activate.constprop.39+0x5d/0x70
>[   46.562666]  [<ffffffff810a46a0>] ? wake_up_q+0x70/0x70
>[   46.562674]  [<ffffffffa10bc324>] snd_pcm_playback_open+0x44/0x70 [snd_pcm]
>[   46.562681]  [<ffffffffa0fe8451>] snd_open+0xb1/0x180 [snd]
>[   46.562688]  [<ffffffff811f9cbe>] chrdev_open+0xae/0x1d0
>[   46.562695]  [<ffffffff811f293f>] do_dentry_open+0x1ff/0x300
>[   46.562700]  [<ffffffff811f9c10>] ? cdev_put+0x30/0x30
>[   46.562706]  [<ffffffff811f39d6>] vfs_open+0x56/0x60
>[   46.562711]  [<ffffffff81203234>] path_openat+0x4f4/0x1160
>[   46.562717]  [<ffffffff81205231>] do_filp_open+0x91/0x100
>[   46.562724]  [<ffffffff8121479c>] ? mntput_no_expire+0x2c/0x1b0
>[   46.562729]  [<ffffffff81212167>] ? __alloc_fd+0xc7/0x190
>[   46.562735]  [<ffffffff811f3d7f>] do_sys_open+0x13f/0x210
>[   46.562741]  [<ffffffff811f3e6e>] SyS_open+0x1e/0x20
>[   46.562748]  [<ffffffff815bdab2>] entry_SYSCALL_64_fastpath+0x1a/0xa4
>[   46.562752] ---[ end trace e9862aac99599718 ]---
>[   47.732292] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[   48.601499] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)

Actions: View

Attachments on bug 95161: 123298

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.