Attachment 124131 Details for Bug 94628 – dmesg with drm.debug=0xe

dmesg with drm.debug=0xe

dmesg.txt (text/plain), 125.85 KB, created by JM9 on 2016-05-27 17:51:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: JM9

Created: 2016-05-27 17:51:05 UTC

Size: 125.85 KB

patch

obsolete

>[    0.000000] Linux version 4.5.4-1-ARCH (builduser@tobias) (gcc version 6.1.1 20160501 (GCC) ) #1 SMP PREEMPT Wed May 11 22:21:28 CEST 2016
>[    0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sdb2 rw resume=/dev/sdb3 no_console_suspend=1 drm.debug=0xe
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ab7efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000002ab7f000-0x000000002be7efff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000002be7f000-0x000000002bf7efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000002bf7f000-0x000000002bffefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000002bfff000-0x000000002bffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff650000-0x00000000ff66efff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008afdfffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] e820: update [mem 0x1f86d018-0x1f884457] usable ==> usable
>[    0.000000] e820: update [mem 0x1f85c018-0x1f86c057] usable ==> usable
>[    0.000000] e820: update [mem 0x1f852018-0x1f85b457] usable ==> usable
>[    0.000000] extended physical RAM map:
>[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable
>[    0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001f852017] usable
>[    0.000000] reserve setup_data: [mem 0x000000001f852018-0x000000001f85b457] usable
>[    0.000000] reserve setup_data: [mem 0x000000001f85b458-0x000000001f85c017] usable
>[    0.000000] reserve setup_data: [mem 0x000000001f85c018-0x000000001f86c057] usable
>[    0.000000] reserve setup_data: [mem 0x000000001f86c058-0x000000001f86d017] usable
>[    0.000000] reserve setup_data: [mem 0x000000001f86d018-0x000000001f884457] usable
>[    0.000000] reserve setup_data: [mem 0x000000001f884458-0x000000002ab7efff] usable
>[    0.000000] reserve setup_data: [mem 0x000000002ab7f000-0x000000002be7efff] reserved
>[    0.000000] reserve setup_data: [mem 0x000000002be7f000-0x000000002bf7efff] ACPI NVS
>[    0.000000] reserve setup_data: [mem 0x000000002bf7f000-0x000000002bffefff] ACPI data
>[    0.000000] reserve setup_data: [mem 0x000000002bfff000-0x000000002bffffff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000ff650000-0x00000000ff66efff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000008afdfffff] usable
>[    0.000000] efi: EFI v2.31 by HPQ
>[    0.000000] efi:  ACPI=0x2bffe000  ACPI 2.0=0x2bffe014  SMBIOS=0x2b32e198 
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: Hewlett-Packard HP Zbook 17 G2/2255, BIOS M70 Ver. 01.12 09/23/2015
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x8afe00 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00FF000000 mask 7FFF000000 write-protect
>[    0.000000]   1 base 0000000000 mask 7FC0000000 write-back
>[    0.000000]   2 base 0030000000 mask 7FF0000000 uncachable
>[    0.000000]   3 base 002E000000 mask 7FFE000000 uncachable
>[    0.000000]   4 base 0100000000 mask 7F00000000 write-back
>[    0.000000]   5 base 0200000000 mask 7E00000000 write-back
>[    0.000000]   6 base 0400000000 mask 7C00000000 write-back
>[    0.000000]   7 base 0800000000 mask 7F80000000 write-back
>[    0.000000]   8 base 0880000000 mask 7FC0000000 write-back
>[    0.000000]   9 base 08B0000000 mask 7FF0000000 uncachable
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0x2c000 max_arch_pfn = 0x400000000
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x01b4a000, 0x01b4afff] PGTABLE
>[    0.000000] BRK [0x01b4b000, 0x01b4bfff] PGTABLE
>[    0.000000] BRK [0x01b4c000, 0x01b4cfff] PGTABLE
>[    0.000000] BRK [0x01b4d000, 0x01b4dfff] PGTABLE
>[    0.000000] BRK [0x01b4e000, 0x01b4efff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x26512000-0x26b43fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x000000002BFFE014 000024 (v02 HPQOEM)
>[    0.000000] ACPI: XSDT 0x000000002BFFD0E8 0000B4 (v01 HPQOEM SLIC-MPC 00000001      01000013)
>[    0.000000] ACPI: FACP 0x000000002BFFB000 00010C (v05 HPQOEM 2255     00000001 HP   00000001)
>[    0.000000] ACPI: DSDT 0x000000002BFCF000 026F15 (v02 HPQOEM 2255     00000001 INTL 20130927)
>[    0.000000] ACPI: FACS 0x000000002BF66000 000040
>[    0.000000] ACPI: HPET 0x000000002BFFA000 000038 (v01 HPQOEM 2255     00000001 HP   00000001)
>[    0.000000] ACPI: APIC 0x000000002BFF9000 0000BC (v01 HPQOEM 2255     00000001 HP   00000001)
>[    0.000000] ACPI: MCFG 0x000000002BFF8000 00003C (v01 HPQOEM 2255     00000001 HP   00000001)
>[    0.000000] ACPI: TCPA 0x000000002BFF6000 000032 (v02 HPQOEM 2255     00000000 HP   00000001)
>[    0.000000] ACPI: SSDT 0x000000002BFCC000 00042C (v01 HPQOEM SataAhci 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x000000002BFCB000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SLIC 0x000000002BFCA000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
>[    0.000000] ACPI: MSDM 0x000000002BFC9000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP   00000001)
>[    0.000000] ACPI: FPDT 0x000000002BFC8000 000044 (v01 HPQOEM 2255     00000001 HP   00000001)
>[    0.000000] ACPI: BGRT 0x000000002BFC7000 000038 (v00 HPQOEM 2255     00000001 HP   00000001)
>[    0.000000] ACPI: SSDT 0x000000002BFC1000 000544 (v02 PmRef  Cpu0Ist  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x000000002BFC0000 000B8F (v02 CpuRef CpuSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x000000002BFBF000 0001D5 (v02 PmRef  LakeTiny 00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x000000002BFBE000 00092C (v02 SaSsdt SaSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x000000002BFBB000 002F5C (v02 HP     NVSGTBL  00001000 INTL 20130927)
>[    0.000000] ACPI: ASF! 0x000000002BFF7000 0000A5 (v32 HPQOEM 2255     00000001 HP   00000001)
>[    0.000000] ACPI: DMAR 0x000000002BFBA000 0000B8 (v01 INTEL  BDW      00000001 INTL 00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000008afdfffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x8afdfb000-0x8afdfefff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x00000008afdfffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009cfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000002ab7efff]
>[    0.000000]   node   0: [mem 0x000000002bfff000-0x000000002bffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x00000008afdfffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000008afdfffff]
>[    0.000000] On node 0 totalpages: 8235291
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 2670 pages used for memmap
>[    0.000000]   DMA32 zone: 170880 pages, LIFO batch:31
>[    0.000000]   Normal zone: 125944 pages used for memmap
>[    0.000000]   Normal zone: 8060416 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0x2e200000-0x4e1fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x1f852000-0x1f852fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x1f85b000-0x1f85bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x1f85c000-0x1f85cfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x1f86c000-0x1f86cfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x1f86d000-0x1f86dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x1f884000-0x1f884fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x2ab7f000-0x2be7efff]
>[    0.000000] PM: Registered nosave memory: [mem 0x2be7f000-0x2bf7efff]
>[    0.000000] PM: Registered nosave memory: [mem 0x2bf7f000-0x2bffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x2c000000-0x2e1fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x2e200000-0x4e1fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x4e200000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff64ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff650000-0xff66efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff66f000-0xffffffff]
>[    0.000000] e820: [mem 0x4e200000-0xe00f7fff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff8808afa00000 s92952 r8192 d29928 u262144
>[    0.000000] pcpu-alloc: s92952 r8192 d29928 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 8106592
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sdb2 rw resume=/dev/sdb3 no_console_suspend=1 drm.debug=0xe
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 32237996K/32941164K available (5864K kernel code, 971K rwdata, 1860K rodata, 1204K init, 1156K bss, 703168K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Preemptible hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
>[    0.000000] NR_IRQS:8448 nr_irqs:488 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2793.630 MHz processor
>[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5589.06 BogoMIPS (lpj=9312100)
>[    0.000027] pid_max: default: 32768 minimum: 301
>[    0.000032] ACPI: Core revision 20160108
>[    0.013140] ACPI: 8 ACPI AML tables successfully acquired and loaded
>
>[    0.026128] Security Framework initialized
>[    0.026131] Yama: becoming mindful.
>[    0.027718] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
>[    0.032604] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.034679] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.034705] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.034978] CPU: Physical Processor ID: 0
>[    0.034980] CPU: Processor Core ID: 0
>[    0.034984] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.034984] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.034988] mce: CPU supports 9 MCE banks
>[    0.035000] CPU0: Thermal monitoring enabled (TM1)
>[    0.035008] process: using mwait in idle threads
>[    0.035011] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>[    0.035012] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.035288] Freeing SMP alternatives memory: 24K (ffffffff81a21000 - ffffffff81a27000)
>[    0.040222] ftrace: allocating 23133 entries in 91 pages
>[    0.048079] DMAR: Host address width 39
>[    0.048081] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>[    0.048086] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
>[    0.048087] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
>[    0.048090] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
>[    0.048091] DMAR: RMRR base: 0x0000002be1e000 end: 0x0000002be3dfff
>[    0.048092] DMAR: RMRR base: 0x0000002e000000 end: 0x0000004e1fffff
>[    0.048094] DMAR-IR: IOAPIC id 0 under DRHD base  0xfed91000 IOMMU 1
>[    0.048095] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
>[    0.048096] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
>[    0.048097] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
>[    0.048348] DMAR-IR: Enabled IRQ remapping in xapic mode
>[    0.048349] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.048759] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.081766] TSC deadline timer enabled
>[    0.081769] smpboot: CPU0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz (family: 0x6, model: 0x3c, stepping: 0x3)
>[    0.081786] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
>[    0.081802] ... version:                3
>[    0.081803] ... bit width:              48
>[    0.081804] ... generic registers:      4
>[    0.081805] ... value mask:             0000ffffffffffff
>[    0.081805] ... max period:             0000ffffffffffff
>[    0.081806] ... fixed-purpose events:   3
>[    0.081807] ... event mask:             000000070000000f
>[    0.111843] x86: Booting SMP configuration:
>[    0.111845] .... node  #0, CPUs:      #1
>[    0.114390] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.121873]  #2 #3 #4 #5 #6 #7
>[    0.174441] x86: Booted up 1 node, 8 CPUs
>[    0.174444] smpboot: Total of 8 processors activated (44715.50 BogoMIPS)
>[    0.181229] devtmpfs: initialized
>[    0.184669] PM: Registering ACPI NVS region [mem 0x2be7f000-0x2bf7efff] (1048576 bytes)
>[    0.184745] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
>[    0.184807] pinctrl core: initialized pinctrl subsystem
>[    0.184845] RTC time: 12:42:56, date: 05/27/16
>[    0.184938] NET: Registered protocol family 16
>[    0.197768] cpuidle: using governor ladder
>[    0.211105] cpuidle: using governor menu
>[    0.211156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.211157] ACPI: bus type PCI registered
>[    0.211158] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.211215] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.211217] PCI: not using MMCONFIG
>[    0.211218] PCI: Using configuration type 1 for base access
>[    0.211665] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.224515] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    0.224516] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.224687] ACPI: Added _OSI(Module Device)
>[    0.224688] ACPI: Added _OSI(Processor Device)
>[    0.224689] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.224690] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.232273] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.234549] ACPI: Dynamic OEM Table Load:
>[    0.234556] ACPI: SSDT 0xFFFF88088BF9BC00 0003F3 (v02 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.235149] ACPI: Dynamic OEM Table Load:
>[    0.235155] ACPI: SSDT 0xFFFF88088BF93000 0005DB (v02 PmRef  ApIst    00003000 INTL 20130927)
>[    0.235776] ACPI: Dynamic OEM Table Load:
>[    0.235781] ACPI: SSDT 0xFFFF88088BFBB000 000119 (v02 PmRef  ApCst    00003000 INTL 20130927)
>[    0.237251] ACPI : EC: EC started
>[    4.125210] ACPI: Interpreter enabled
>[    4.125230] ACPI: (supports S0 S3 S4 S5)
>[    4.125231] ACPI: Using IOAPIC for interrupt routing
>[    4.125246] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    4.125595] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    4.125606] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    4.127458] ACPI: Power Resource [APPR] (off)
>[    4.129208] ACPI: Power Resource [COMP] (off)
>[    4.129404] ACPI: Power Resource [LPP] (on)
>[    4.130142] ACPI: Power Resource [WRST] (on)
>[    4.132188] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    4.132193] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    4.133329] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    4.133330] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
>[    4.133717] PCI host bridge to bus 0000:00
>[    4.133719] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    4.133721] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    4.133722] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    4.133723] pci_bus 0000:00: root bus resource [mem 0x4e200000-0xdfffffff window]
>[    4.133724] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
>[    4.133725] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
>[    4.133726] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
>[    4.133728] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    4.133733] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
>[    4.133834] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
>[    4.133867] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    4.133971] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
>[    4.133979] pci 0000:00:02.0: reg 0x10: [mem 0xce400000-0xce7fffff 64bit]
>[    4.133984] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
>[    4.133987] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
>[    4.134107] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
>[    4.134123] pci 0000:00:14.0: reg 0x10: [mem 0xce820000-0xce82ffff 64bit]
>[    4.134182] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    4.134237] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    4.134267] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
>[    4.134283] pci 0000:00:16.0: reg 0x10: [mem 0xce838000-0xce83800f 64bit]
>[    4.134344] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    4.134423] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
>[    4.134434] pci 0000:00:16.3: reg 0x10: [io  0x60b0-0x60b7]
>[    4.134440] pci 0000:00:16.3: reg 0x14: [mem 0xce83b000-0xce83bfff]
>[    4.134568] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
>[    4.134581] pci 0000:00:19.0: reg 0x10: [mem 0xce800000-0xce81ffff]
>[    4.134589] pci 0000:00:19.0: reg 0x14: [mem 0xce83a000-0xce83afff]
>[    4.134596] pci 0000:00:19.0: reg 0x18: [io  0x6080-0x609f]
>[    4.134652] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    4.134707] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    4.134736] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
>[    4.134751] pci 0000:00:1a.0: reg 0x10: [mem 0xce836000-0xce8363ff]
>[    4.134832] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    4.134887] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    4.134917] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
>[    4.134930] pci 0000:00:1b.0: reg 0x10: [mem 0xce830000-0xce833fff 64bit]
>[    4.134987] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    4.135069] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
>[    4.135140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    4.135245] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
>[    4.135309] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
>[    4.135383] pci 0000:00:1c.6: System wakeup disabled by ACPI
>[    4.135415] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
>[    4.135431] pci 0000:00:1d.0: reg 0x10: [mem 0xce835000-0xce8353ff]
>[    4.135512] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    4.135568] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    4.135598] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
>[    4.135772] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
>[    4.135784] pci 0000:00:1f.2: reg 0x10: [io  0x60a8-0x60af]
>[    4.135791] pci 0000:00:1f.2: reg 0x14: [io  0x60bc-0x60bf]
>[    4.135798] pci 0000:00:1f.2: reg 0x18: [io  0x60a0-0x60a7]
>[    4.135804] pci 0000:00:1f.2: reg 0x1c: [io  0x60b8-0x60bb]
>[    4.135811] pci 0000:00:1f.2: reg 0x20: [io  0x6060-0x607f]
>[    4.135818] pci 0000:00:1f.2: reg 0x24: [mem 0xce834000-0xce8347ff]
>[    4.135854] pci 0000:00:1f.2: PME# supported from D3hot
>[    4.135931] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
>[    4.135945] pci 0000:00:1f.3: reg 0x10: [mem 0xce837000-0xce8370ff 64bit]
>[    4.135963] pci 0000:00:1f.3: reg 0x20: [io  0xef80-0xef9f]
>[    4.136097] pci 0000:01:00.0: [10de:11b6] type 00 class 0x030000
>[    4.136109] pci 0000:01:00.0: reg 0x10: [mem 0xcd000000-0xcdffffff]
>[    4.136120] pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref]
>[    4.136130] pci 0000:01:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref]
>[    4.136136] pci 0000:01:00.0: reg 0x24: [io  0x5000-0x507f]
>[    4.136143] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
>[    4.140325] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    4.140327] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
>[    4.140329] pci 0000:00:01.0:   bridge window [mem 0xcd000000-0xce0fffff]
>[    4.140331] pci 0000:00:01.0:   bridge window [mem 0x50000000-0x61ffffff 64bit pref]
>[    4.140381] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
>[    4.140386] pci 0000:00:1c.0:   bridge window [mem 0xb0000000-0xc60fffff]
>[    4.140391] pci 0000:00:1c.0:   bridge window [mem 0x70000000-0x91ffffff 64bit pref]
>[    4.140438] pci 0000:3b:00.0: [12d8:2404] type 01 class 0x060400
>[    4.140554] pci 0000:3b:00.0: supports D1 D2
>[    4.140555] pci 0000:3b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    4.146993] pci 0000:00:1c.6: PCI bridge to [bus 3b-5f]
>[    4.146996] pci 0000:00:1c.6:   bridge window [io  0x3000-0x4fff]
>[    4.146999] pci 0000:00:1c.6:   bridge window [mem 0xc8000000-0xcc1fffff]
>[    4.147062] pci 0000:3c:01.0: [12d8:2404] type 01 class 0x060400
>[    4.147178] pci 0000:3c:01.0: supports D1 D2
>[    4.147179] pci 0000:3c:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    4.147244] pci 0000:3c:02.0: [12d8:2404] type 01 class 0x060400
>[    4.147360] pci 0000:3c:02.0: supports D1 D2
>[    4.147361] pci 0000:3c:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    4.147424] pci 0000:3c:03.0: [12d8:2404] type 01 class 0x060400
>[    4.147540] pci 0000:3c:03.0: supports D1 D2
>[    4.147541] pci 0000:3c:03.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    4.147623] pci 0000:3b:00.0: PCI bridge to [bus 3c-5f]
>[    4.147629] pci 0000:3b:00.0:   bridge window [io  0x3000-0x4fff]
>[    4.147633] pci 0000:3b:00.0:   bridge window [mem 0xc8000000-0xcc1fffff]
>[    4.147785] pci 0000:3d:00.0: [8086:08b1] type 00 class 0x028000
>[    4.147829] pci 0000:3d:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
>[    4.148132] pci 0000:3d:00.0: PME# supported from D0 D3hot D3cold
>[    4.153762] pci 0000:3c:01.0: PCI bridge to [bus 3d]
>[    4.153771] pci 0000:3c:01.0:   bridge window [mem 0xcc100000-0xcc1fffff]
>[    4.153822] pci 0000:3c:02.0: PCI bridge to [bus 3e-5e]
>[    4.153828] pci 0000:3c:02.0:   bridge window [io  0x3000-0x4fff]
>[    4.153832] pci 0000:3c:02.0:   bridge window [mem 0xc8000000-0xcbffffff]
>[    4.153901] pci 0000:5f:00.0: [10ec:5249] type 00 class 0xff0000
>[    4.153929] pci 0000:5f:00.0: reg 0x10: [mem 0xcc000000-0xcc000fff]
>[    4.154142] pci 0000:5f:00.0: supports D1 D2
>[    4.154143] pci 0000:5f:00.0: PME# supported from D1 D2 D3hot D3cold
>[    4.160357] pci 0000:3c:03.0: PCI bridge to [bus 5f]
>[    4.160365] pci 0000:3c:03.0:   bridge window [mem 0xcc000000-0xcc0fffff]
>[    4.161171] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    4.161208] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    4.161241] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    4.161273] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    4.161306] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    4.161338] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    4.161371] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    4.161402] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    4.161658] ACPI: Enabled 7 GPEs in block 00 to 3F
>[    4.161694] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>[    4.161764] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    4.161765] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    4.161769] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
>[    4.161770] vgaarb: loaded
>[    4.161771] vgaarb: bridge control possible 0000:01:00.0
>[    4.161772] vgaarb: no bridge control possible 0000:00:02.0
>[    4.161855] PCI: Using ACPI for IRQ routing
>[    4.167652] PCI: pci_cache_line_size set to 64 bytes
>[    4.167861] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    4.167862] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
>[    4.167863] e820: reserve RAM buffer [mem 0x1f852018-0x1fffffff]
>[    4.167864] e820: reserve RAM buffer [mem 0x1f85c018-0x1fffffff]
>[    4.167865] e820: reserve RAM buffer [mem 0x1f86d018-0x1fffffff]
>[    4.167866] e820: reserve RAM buffer [mem 0x2ab7f000-0x2bffffff]
>[    4.167867] e820: reserve RAM buffer [mem 0x8afe00000-0x8afffffff]
>[    4.167947] NetLabel: Initializing
>[    4.167948] NetLabel:  domain hash size = 128
>[    4.167949] NetLabel:  protocols = UNLABELED CIPSOv4
>[    4.167957] NetLabel:  unlabeled traffic allowed by default
>[    4.167981] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    4.167985] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    4.170006] clocksource: Switched to clocksource hpet
>[    4.174420] VFS: Disk quotas dquot_6.6.0
>[    4.174433] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    4.174527] pnp: PnP ACPI init
>[    4.174660] pnp 00:00: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:3d:00.0 BAR 0 [mem 0x00000000-0x00001fff 64bit]
>[    4.174683] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    4.174684] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
>[    4.174685] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
>[    4.174687] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
>[    4.174688] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
>[    4.174689] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    4.174691] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
>[    4.174692] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    4.174693] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    4.174694] system 00:00: [mem 0x4e210000-0x4e21ffff] has been reserved
>[    4.174696] system 00:00: [mem 0x4e200000-0x4e20ffff] has been reserved
>[    4.174699] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    4.174863] system 00:01: [io  0x0200-0x020f] has been reserved
>[    4.174864] system 00:01: [io  0x0220-0x027f] has been reserved
>[    4.174865] system 00:01: [io  0xffff] has been reserved
>[    4.174867] system 00:01: [io  0xffff] has been reserved
>[    4.174868] system 00:01: [io  0xffff] has been reserved
>[    4.174869] system 00:01: [io  0x1800-0x18fe] could not be reserved
>[    4.174870] system 00:01: [io  0xef80-0xef9f] has been reserved
>[    4.174872] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    4.174907] system 00:02: [io  0x0800-0x087f] has been reserved
>[    4.174909] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    4.174927] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    4.175218] pnp 00:04: [dma 0 disabled]
>[    4.175265] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
>[    4.175281] pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active)
>[    4.175296] pnp 00:06: Plug and Play ACPI device, IDs SYN3013 SYN0100 SYN0002 PNP0f13 (active)
>[    4.175647] pnp 00:07: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
>[    4.175672] pnp: PnP ACPI: found 8 devices
>[    4.181575] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    4.181581] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
>[    4.181596] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02-3a] add_size 1000
>[    4.181613] pci 0000:3c:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3e-5e] add_size 200000 add_align 100000
>[    4.181622] pci 0000:3c:03.0: bridge window [io  0x1000-0x0fff] to [bus 5f] add_size 1000
>[    4.181624] pci 0000:3c:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5f] add_size 200000 add_align 100000
>[    4.181634] pci 0000:3c:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    4.181635] pci 0000:3c:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    4.181636] pci 0000:3c:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    4.181638] pci 0000:3c:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    4.181639] pci 0000:3b:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3c-5f] add_size 400000 add_align 100000
>[    4.181646] pci 0000:3b:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 400000 min_align 100000
>[    4.181647] pci 0000:3b:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 400000 min_align 100000
>[    4.181648] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-5f] add_size 400000 add_align 100000
>[    4.181651] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 400000 min_align 100000
>[    4.181652] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x004fffff 64bit pref] res_to_dev_res add_size 400000 min_align 100000
>[    4.181654] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
>[    4.181655] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
>[    4.181661] pci 0000:00:1c.6: BAR 15: assigned [mem 0x4e300000-0x4e6fffff 64bit pref]
>[    4.181663] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>[    4.181665] pci 0000:01:00.0: BAR 6: assigned [mem 0xce000000-0xce07ffff pref]
>[    4.181667] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    4.181669] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
>[    4.181671] pci 0000:00:01.0:   bridge window [mem 0xcd000000-0xce0fffff]
>[    4.181673] pci 0000:00:01.0:   bridge window [mem 0x50000000-0x61ffffff 64bit pref]
>[    4.181676] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
>[    4.181679] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    4.181683] pci 0000:00:1c.0:   bridge window [mem 0xb0000000-0xc60fffff]
>[    4.181687] pci 0000:00:1c.0:   bridge window [mem 0x70000000-0x91ffffff 64bit pref]
>[    4.181693] pci 0000:3b:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 400000 min_align 100000
>[    4.181694] pci 0000:3b:00.0: res[15]=[mem 0x00100000-0x004fffff 64bit pref] res_to_dev_res add_size 400000 min_align 100000
>[    4.181696] pci 0000:3b:00.0: BAR 15: assigned [mem 0x4e300000-0x4e6fffff 64bit pref]
>[    4.181698] pci 0000:3c:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    4.181699] pci 0000:3c:02.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    4.181700] pci 0000:3c:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    4.181701] pci 0000:3c:03.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[    4.181703] pci 0000:3c:03.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
>[    4.181704] pci 0000:3c:03.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
>[    4.181705] pci 0000:3c:02.0: BAR 15: assigned [mem 0x4e300000-0x4e4fffff 64bit pref]
>[    4.181707] pci 0000:3c:03.0: BAR 15: assigned [mem 0x4e500000-0x4e6fffff 64bit pref]
>[    4.181708] pci 0000:3c:03.0: BAR 13: no space for [io  size 0x1000]
>[    4.181710] pci 0000:3c:03.0: BAR 13: failed to assign [io  size 0x1000]
>[    4.181711] pci 0000:3c:03.0: BAR 13: no space for [io  size 0x1000]
>[    4.181712] pci 0000:3c:03.0: BAR 13: failed to assign [io  size 0x1000]
>[    4.181714] pci 0000:3d:00.0: BAR 0: assigned [mem 0xcc100000-0xcc101fff 64bit]
>[    4.181811] pci 0000:3c:01.0: PCI bridge to [bus 3d]
>[    4.181817] pci 0000:3c:01.0:   bridge window [mem 0xcc100000-0xcc1fffff]
>[    4.181826] pci 0000:3c:02.0: PCI bridge to [bus 3e-5e]
>[    4.181828] pci 0000:3c:02.0:   bridge window [io  0x3000-0x4fff]
>[    4.181833] pci 0000:3c:02.0:   bridge window [mem 0xc8000000-0xcbffffff]
>[    4.181838] pci 0000:3c:02.0:   bridge window [mem 0x4e300000-0x4e4fffff 64bit pref]
>[    4.181844] pci 0000:3c:03.0: PCI bridge to [bus 5f]
>[    4.181849] pci 0000:3c:03.0:   bridge window [mem 0xcc000000-0xcc0fffff]
>[    4.181853] pci 0000:3c:03.0:   bridge window [mem 0x4e500000-0x4e6fffff 64bit pref]
>[    4.181860] pci 0000:3b:00.0: PCI bridge to [bus 3c-5f]
>[    4.181862] pci 0000:3b:00.0:   bridge window [io  0x3000-0x4fff]
>[    4.181868] pci 0000:3b:00.0:   bridge window [mem 0xc8000000-0xcc1fffff]
>[    4.181872] pci 0000:3b:00.0:   bridge window [mem 0x4e300000-0x4e6fffff 64bit pref]
>[    4.181878] pci 0000:00:1c.6: PCI bridge to [bus 3b-5f]
>[    4.181880] pci 0000:00:1c.6:   bridge window [io  0x3000-0x4fff]
>[    4.181885] pci 0000:00:1c.6:   bridge window [mem 0xc8000000-0xcc1fffff]
>[    4.181888] pci 0000:00:1c.6:   bridge window [mem 0x4e300000-0x4e6fffff 64bit pref]
>[    4.181894] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    4.181895] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    4.181896] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    4.181897] pci_bus 0000:00: resource 7 [mem 0x4e200000-0xdfffffff window]
>[    4.181899] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
>[    4.181900] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
>[    4.181901] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
>[    4.181902] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
>[    4.181903] pci_bus 0000:01: resource 1 [mem 0xcd000000-0xce0fffff]
>[    4.181904] pci_bus 0000:01: resource 2 [mem 0x50000000-0x61ffffff 64bit pref]
>[    4.181905] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>[    4.181906] pci_bus 0000:02: resource 1 [mem 0xb0000000-0xc60fffff]
>[    4.181907] pci_bus 0000:02: resource 2 [mem 0x70000000-0x91ffffff 64bit pref]
>[    4.181908] pci_bus 0000:3b: resource 0 [io  0x3000-0x4fff]
>[    4.181910] pci_bus 0000:3b: resource 1 [mem 0xc8000000-0xcc1fffff]
>[    4.181911] pci_bus 0000:3b: resource 2 [mem 0x4e300000-0x4e6fffff 64bit pref]
>[    4.181912] pci_bus 0000:3c: resource 0 [io  0x3000-0x4fff]
>[    4.181913] pci_bus 0000:3c: resource 1 [mem 0xc8000000-0xcc1fffff]
>[    4.181914] pci_bus 0000:3c: resource 2 [mem 0x4e300000-0x4e6fffff 64bit pref]
>[    4.181915] pci_bus 0000:3d: resource 1 [mem 0xcc100000-0xcc1fffff]
>[    4.181916] pci_bus 0000:3e: resource 0 [io  0x3000-0x4fff]
>[    4.181917] pci_bus 0000:3e: resource 1 [mem 0xc8000000-0xcbffffff]
>[    4.181918] pci_bus 0000:3e: resource 2 [mem 0x4e300000-0x4e4fffff 64bit pref]
>[    4.181920] pci_bus 0000:5f: resource 1 [mem 0xcc000000-0xcc0fffff]
>[    4.181921] pci_bus 0000:5f: resource 2 [mem 0x4e500000-0x4e6fffff 64bit pref]
>[    4.181942] NET: Registered protocol family 2
>[    4.182123] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>[    4.182381] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    4.182485] TCP: Hash tables configured (established 262144 bind 65536)
>[    4.182513] UDP hash table entries: 16384 (order: 7, 524288 bytes)
>[    4.182585] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
>[    4.182674] NET: Registered protocol family 1
>[    4.182685] pci 0000:00:02.0: Video device with shadowed ROM
>[    4.183242] PCI: CLS 64 bytes, default 64
>[    4.183279] Unpacking initramfs...
>[    4.267707] Freeing initrd memory: 6344K (ffff880026512000 - ffff880026b44000)
>[    4.267734] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    4.267736] software IO TLB [mem 0x22512000-0x26512000] (64MB) mapped at [ffff880022512000-ffff880026511fff]
>[    4.267782] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
>[    4.267783] hw unit of domain pp0-core 2^-14 Joules
>[    4.267784] hw unit of domain package 2^-14 Joules
>[    4.267785] hw unit of domain dram 2^-14 Joules
>[    4.267785] hw unit of domain pp1-gpu 2^-14 Joules
>[    4.267864] Scanning for low memory corruption every 60 seconds
>[    4.268090] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    4.268329] Initialise system trusted keyring
>[    4.269601] zbud: loaded
>[    4.269791] Key type big_key registered
>[    4.270028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    4.270060] io scheduler noop registered
>[    4.270063] io scheduler deadline registered
>[    4.270084] io scheduler cfq registered (default)
>[    4.271034] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
>[    4.271036] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
>[    4.271038] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
>[    4.271054] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>[    4.271057] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>[    4.271072] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
>[    4.271073] pcieport 0000:3b:00.0: Signaling PME through PCIe PME interrupt
>[    4.271074] pcieport 0000:3c:01.0: Signaling PME through PCIe PME interrupt
>[    4.271075] pci 0000:3d:00.0: Signaling PME through PCIe PME interrupt
>[    4.271076] pcieport 0000:3c:02.0: Signaling PME through PCIe PME interrupt
>[    4.271077] pcieport 0000:3c:03.0: Signaling PME through PCIe PME interrupt
>[    4.271078] pci 0000:5f:00.0: Signaling PME through PCIe PME interrupt
>[    4.271081] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
>[    4.271086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    4.271094] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
>[    4.271121] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
>[    4.271128] pciehp 0000:3c:02.0:pcie24: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
>[    4.271160] pciehp 0000:3c:02.0:pcie24: service driver pciehp loaded
>[    4.271168] pciehp 0000:3c:03.0:pcie24: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
>[    4.271200] pciehp 0000:3c:03.0:pcie24: service driver pciehp loaded
>[    4.271203] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    4.271214] efifb: probing for efifb
>[    4.271226] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90003800000, using 8100k, total 8100k
>[    4.271227] efifb: mode is 1920x1080x32, linelength=7680, pages=1
>[    4.271228] efifb: scrolling: redraw
>[    4.271229] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    4.274628] Console: switching to colour frame buffer device 240x67
>[    4.277936] fb0: EFI VGA frame buffer device
>[    4.277943] intel_idle: MWAIT substates: 0x42120
>[    4.277944] intel_idle: v0.4.1 model 0x3C
>[    4.277944] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    4.278241] GHES: HEST is not enabled!
>[    4.278300] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>[    4.278570] serial 0000:00:16.3: enabling device (0000 -> 0003)
>[    4.298980] 0000:00:16.3: ttyS0 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
>[    4.299172] Linux agpgart interface v0.103
>[    4.299767] rtc_cmos 00:03: RTC can wake from S4
>[    4.299885] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    4.299913] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    4.299924] Intel P-state driver initializing.
>[    4.300182] ledtrig-cpu: registered to indicate activity on CPUs
>[    4.301275] NET: Registered protocol family 10
>[    4.301815] NET: Registered protocol family 17
>[    4.302512] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x1c
>[    4.302529] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x1c
>[    4.302550] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x1c
>[    4.302566] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x1c
>[    4.302579] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x1c
>[    4.302601] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x1c
>[    4.302648] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x1c
>[    4.302671] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x1c
>[    4.302832] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    4.303270] registered taskstats version 1
>[    4.303312] Loading compiled-in X.509 certificates
>[    4.303392] zswap: loaded using pool lzo/zbud
>[    4.305148]   Magic number: 0:978:734
>[    4.305391] rtc_cmos 00:03: setting system clock to 2016-05-27 12:43:00 UTC (1464352980)
>[    4.305592] PM: Checking hibernation image partition /dev/sdb3
>[    4.305601] PM: Hibernation image not present or could not be loaded.
>[    4.307054] Freeing unused kernel memory: 1204K (ffffffff818f4000 - ffffffff81a21000)
>[    4.307056] Write protecting the kernel read-only data: 8192k
>[    4.307255] Freeing unused kernel memory: 268K (ffff8800015bd000 - ffff880001600000)
>[    4.307624] Freeing unused kernel memory: 188K (ffff8800017d1000 - ffff880001800000)
>[    4.532923] random: systemd urandom read with 11 bits of entropy available
>[    4.535150] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>[    4.535317] systemd[1]: Detected architecture x86-64.
>[    4.535319] systemd[1]: Running in initial RAM disk.
>[    4.535322] systemd[1]: Running with unpopulated /etc.
>[    4.535363] systemd[1]: No hostname configured.
>[    4.535365] systemd[1]: Set hostname to <localhost>.
>[    4.535381] systemd[1]: Initializing machine ID from random generator.
>[    4.536555] systemd[1]: Populated /etc with preset unit settings.
>[    4.560062] systemd[1]: Reached target Timers.
>[    4.560145] systemd[1]: Listening on udev Control Socket.
>[    4.560200] systemd[1]: Listening on udev Kernel Socket.
>[    4.560244] systemd[1]: Reached target Swap.
>[    4.560282] systemd[1]: Reached target Paths.
>[    4.560336] systemd[1]: Listening on Journal Socket.
>[    4.560588] systemd[1]: Created slice system.slice.
>[    4.560890] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[    4.561423] systemd[1]: Reached target Slices.
>[    4.561503] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
>[    4.561552] systemd[1]: Listening on Journal Socket (/dev/log).
>[    4.561585] systemd[1]: Reached target Sockets.
>[    4.561795] systemd[1]: Starting Journal Service...
>[    4.562044] systemd[1]: Starting udev Coldplug all Devices...
>[    4.562470] systemd[1]: Started Create list of required static device nodes for the current kernel.
>[    4.562746] systemd[1]: Starting Create Static Device Nodes in /dev...
>[    4.563519] systemd[1]: Started Create Static Device Nodes in /dev.
>[    4.563817] systemd[1]: Starting udev Kernel Device Manager...
>[    4.565167] systemd[1]: Started udev Kernel Device Manager.
>[    4.580020] systemd[1]: Started Journal Service.
>[    4.582297] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>[    4.582301] ACPI: Sleep Button [SLPB]
>[    4.582331] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    4.582365] ACPI: Lid Switch [LID]
>[    4.582395] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    4.582396] ACPI: Power Button [PWRF]
>[    4.585849] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    4.587055] i8042: Detected active multiplexing controller, rev 1.1
>[    4.587714] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    4.587740] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    4.587756] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    4.587773] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    4.587788] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    4.590108] ACPI: bus type USB registered
>[    4.590134] usbcore: registered new interface driver usbfs
>[    4.590142] usbcore: registered new interface driver hub
>[    4.590170] usbcore: registered new device driver usb
>[    4.590267] [drm] Initialized drm 1.1.0 20060810
>[    4.590506] rtsx_pci 0000:5f:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 32
>[    4.590632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    4.590855] ehci-pci: EHCI PCI platform driver
>[    4.591023] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    4.591027] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    4.591038] ehci-pci 0000:00:1a.0: debug port 2
>[    4.592397] SCSI subsystem initialized
>[    4.593805] libata version 3.00 loaded.
>[    4.594945] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    4.594973] ehci-pci 0000:00:1a.0: irq 16, io mem 0xce836000
>[    4.603349] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    4.603478] hub 1-0:1.0: USB hub found
>[    4.603483] hub 1-0:1.0: 3 ports detected
>[    4.603718] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    4.603722] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    4.603733] ehci-pci 0000:00:1d.0: debug port 2
>[    4.607638] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    4.607653] ehci-pci 0000:00:1d.0: irq 17, io mem 0xce835000
>[    4.616716] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    4.616859] hub 2-0:1.0: USB hub found
>[    4.616863] hub 2-0:1.0: 3 ports detected
>[    4.617138] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    4.617143] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    4.618225] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    4.618229] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    4.618372] hub 3-0:1.0: USB hub found
>[    4.618390] hub 3-0:1.0: 15 ports detected
>[    4.619046] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    4.619048] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    4.619150] hub 4-0:1.0: USB hub found
>[    4.619163] hub 4-0:1.0: 6 ports detected
>[    4.619323] usb: port power management may be unreliable
>[    4.619492] ahci 0000:00:1f.2: version 3.0
>[    4.619645] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    4.619676] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
>[    4.619679] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
>[    4.633045] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    4.650618] scsi host0: ahci
>[    4.650756] scsi host1: ahci
>[    4.650983] scsi host2: ahci
>[    4.651132] scsi host3: ahci
>[    4.651267] scsi host4: ahci
>[    4.651365] scsi host5: ahci
>[    4.651400] ata1: SATA max UDMA/133 abar m2048@0xce834000 port 0xce834100 irq 34
>[    4.651403] ata2: SATA max UDMA/133 abar m2048@0xce834000 port 0xce834180 irq 34
>[    4.651405] ata3: SATA max UDMA/133 abar m2048@0xce834000 port 0xce834200 irq 34
>[    4.651408] ata4: SATA max UDMA/133 abar m2048@0xce834000 port 0xce834280 irq 34
>[    4.651409] ata5: SATA max UDMA/133 abar m2048@0xce834000 port 0xce834300 irq 34
>[    4.651410] ata6: DUMMY
>[    4.651845] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0416 rev=0x06 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    4.651860] [drm:intel_detect_pch] Found LynxPoint PCH
>[    4.651941] [drm] Memory usable by graphics device = 2048M
>[    4.651943] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    4.651944] [drm:i915_gem_gtt_init] GTT stolen size = 512M
>[    4.651945] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    4.651946] checking generic (a0000000 7e9000) vs hw (a0000000 10000000)
>[    4.651947] fb: switching to inteldrmfb from EFI VGA
>[    4.651966] Console: switching to colour dummy device 80x25
>[    4.652028] [drm] Replacing VGA console driver
>[    4.652053] [drm:intel_opregion_setup] graphic opregion physical addr: 0x2bf62018
>[    4.652058] [drm:intel_opregion_setup] Public ACPI methods supported
>[    4.652059] [drm:intel_opregion_setup] SWSCI supported
>[    4.652060] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
>[    4.656695] [drm:swsci_setup] SWSCI BIOS requested (00400081) SBCB callbacks that are not supported (00200181)
>[    4.656697] [drm:swsci_setup] SWSCI GBDA callbacks 000000b3, SBCB callbacks 00400081
>[    4.656698] [drm:intel_opregion_setup] ASLE supported
>[    4.656699] [drm:intel_opregion_setup] ASLE extension supported
>[    4.656700] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    4.656795] [drm:intel_device_info_runtime_init] slice total: 0
>[    4.656796] [drm:intel_device_info_runtime_init] subslice total: 0
>[    4.656797] [drm:intel_device_info_runtime_init] subslice per slice: 0
>[    4.656798] [drm:intel_device_info_runtime_init] EU total: 0
>[    4.656799] [drm:intel_device_info_runtime_init] EU per subslice: 0
>[    4.656800] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    4.656801] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    4.656801] [drm:intel_device_info_runtime_init] has EU power gating: n
>[    4.656803] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    4.656803] [drm] Driver supports precise vblank timestamp query.
>[    4.656805] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    4.656806] [drm:intel_bios_init] VBT signature "$VBT HASWELL        ", BDB version 184
>[    4.656807] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    4.656808] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    4.656810] [drm:parse_lfp_panel_data] DRRS supported mode is seamless
>[    4.656811] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    4.656813] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    4.656814] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    4.656816] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    4.656817] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    4.656819] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    4.656820] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    4.656821] [drm:parse_driver_features] DRRS State Enabled:0
>[    4.656823] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    4.656824] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    4.656847] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    4.656971] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    4.656976] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 524288K, usable: 523264K
>[    4.656978] [drm:intel_power_well_enable] enabling always-on
>[    4.656979] [drm:intel_power_well_enable] enabling display
>[    4.657158] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    4.657159] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
>[    4.657160] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
>[    4.657161] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
>[    4.657162] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    4.657163] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    4.657164] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
>[    4.657165] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
>[    4.657166] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
>[    4.657167] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    4.657167] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    4.657168] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
>[    4.657169] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
>[    4.657170] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
>[    4.657171] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    4.657173] [drm:intel_modeset_init] 3 display pipes available.
>[    4.657185] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz
>[    4.657186] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz
>[    4.657187] [drm:intel_update_max_cdclk] Max dotclock rate: 540000 kHz
>[    4.657191] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
>[    4.657537] [drm:intel_crt_reset] crt adpa set to 0xf40000
>[    4.657541] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    4.657569] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 0 t10 500 t11_t12 6000
>[    4.657570] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    4.657571] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    4.657572] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    4.657574] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    4.657591] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    4.657598] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    4.658572] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
>[    4.659425] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
>[    4.659430] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[    4.659432] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    4.659433] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    4.659447] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x186906
>[    4.664731] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    4.664732] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[    4.664737] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 4882/4882
>[    4.744591] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled
>[    4.744594] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled
>[    4.744595] [drm:intel_modeset_readout_hw_state] [CRTC:29] hw state readout: disabled
>[    4.744597] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    4.744598] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    4.744600] [drm:intel_modeset_readout_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0
>[    4.744601] [drm:intel_modeset_readout_hw_state] [ENCODER:32:DAC-32] hw state readout: disabled, pipe A
>[    4.744605] [drm:intel_modeset_readout_hw_state] [ENCODER:33:TMDS-33] hw state readout: enabled, pipe A
>[    4.744607] [drm:intel_modeset_readout_hw_state] [CONNECTOR:34:eDP-1] hw state readout: enabled
>[    4.744608] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:VGA-1] hw state readout: disabled
>[    4.744618] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff8808885e0c00 for pipe A
>[    4.744619] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    4.744620] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[    4.744621] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.744623] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
>[    4.744624] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    4.744625] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    4.744626] [drm:intel_dump_pipe_config] requested mode:
>[    4.744627] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138999 1920 1968 2000 2080 1080 1083 1088 1113 0x40 0xa
>[    4.744628] [drm:intel_dump_pipe_config] adjusted mode:
>[    4.744630] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138999 1920 1968 2000 2080 1080 1083 1088 1113 0x40 0xa
>[    4.744631] [drm:intel_dump_crtc_timings] crtc timings: 138999 1920 1968 2000 2080 1080 1083 1088 1113, type: 0x40 flags: 0xa
>[    4.744632] [drm:intel_dump_pipe_config] port clock: 270000
>[    4.744633] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    4.744634] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    4.744635] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.744636] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    4.744637] [drm:intel_dump_pipe_config] ips: 0
>[    4.744638] [drm:intel_dump_pipe_config] double wide: 0
>[    4.744639] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    4.744640] [drm:intel_dump_pipe_config] planes on this crtc
>[    4.744641] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[    4.744642] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[    4.744643] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    4.744645] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff8808885e1c00 for pipe B
>[    4.744645] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    4.744646] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    4.744647] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.744648] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.744650] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    4.744650] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    4.744651] [drm:intel_dump_pipe_config] requested mode:
>[    4.744653] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.744653] [drm:intel_dump_pipe_config] adjusted mode:
>[    4.744655] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.744656] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    4.744657] [drm:intel_dump_pipe_config] port clock: 0
>[    4.744657] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    4.744658] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    4.744659] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.744660] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    4.744661] [drm:intel_dump_pipe_config] ips: 0
>[    4.744662] [drm:intel_dump_pipe_config] double wide: 0
>[    4.744663] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    4.744663] [drm:intel_dump_pipe_config] planes on this crtc
>[    4.744664] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
>[    4.744666] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
>[    4.744667] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
>[    4.744668] [drm:intel_dump_pipe_config] [CRTC:29][setup_hw_state] config ffff8808885e2c00 for pipe C
>[    4.744669] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    4.744670] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    4.744671] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.744672] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.744673] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    4.744674] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    4.744674] [drm:intel_dump_pipe_config] requested mode:
>[    4.744676] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.744676] [drm:intel_dump_pipe_config] adjusted mode:
>[    4.744678] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.744679] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    4.744680] [drm:intel_dump_pipe_config] port clock: 0
>[    4.744680] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    4.744681] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    4.744682] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.744683] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    4.744684] [drm:intel_dump_pipe_config] ips: 0
>[    4.744685] [drm:intel_dump_pipe_config] double wide: 0
>[    4.744685] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    4.744686] [drm:intel_dump_pipe_config] planes on this crtc
>[    4.744687] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
>[    4.744688] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
>[    4.744689] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
>[    4.744693] [drm:intel_power_well_disable] disabling display
>[    4.744695] [drm:hsw_set_power_well] Requesting to disable the power well
>[    4.744698] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    4.744700] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    4.744703] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    4.744706] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880888624000
>[    4.744767] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    4.744768] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, 7ffff000]
>[    4.745760] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    4.746339] [drm:i915_gem_context_init] HW context support initialized
>[    4.746344] [drm:init_status_page] render ring hws offset: 0x007fa000
>[    4.746375] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0081b000
>[    4.746379] [drm:init_status_page] bsd ring hws offset: 0x0081c000
>[    4.746418] [drm:init_status_page] blitter ring hws offset: 0x0083d000
>[    4.746442] [drm:init_status_page] video enhancement ring hws offset: 0x0085e000
>[    4.748608] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz
>[    4.748673] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    4.748675] [drm:intel_fbdev_init_bios] found possible fb from plane A
>[    4.748676] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[    4.748676] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping
>[    4.748677] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
>[    4.748679] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    4.748680] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400)
>[    4.748681] [drm:intel_fbdev_init_bios] pipe B not active, skipping
>[    4.748682] [drm:intel_fbdev_init_bios] pipe C not active, skipping
>[    4.748683] [drm:intel_fbdev_init_bios] using BIOS fb for initial console
>[    4.748716] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:eDP-1]
>[    4.748719] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1]
>[    4.748867] [drm:intel_didl_outputs] 8 outputs detected
>[    4.749372] ACPI: Video Device [DGFX] (multi-head: yes  rom: yes  post: no)
>[    4.749601] [drm:intel_dp_probe_oui] Sink OUI: 00e04c
>[    4.749692] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input8
>[    4.750475] [drm:intel_dp_probe_oui] Branch OUI: 00e04c
>[    4.750675] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    4.750830] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
>[    4.750853] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
>[    4.751761] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:eDP-1] status updated from unknown to connected
>[    4.751778] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    4.751780] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:eDP-1] probed modes :
>[    4.751782] [drm:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 139000 1920 1968 2000 2080 1080 1083 1088 1113 0x48 0xa
>[    4.751783] [drm:drm_mode_debug_printmodeline] Modeline 36:"1920x1080" 40 92670 1920 1968 2000 2080 1080 1083 1088 1113 0x40 0xa
>[    4.751784] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:31:VGA-1]
>[    4.751785] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1
>[    4.751788] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[    4.762077] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    4.762079] [drm:intel_crt_detect] CRT not detected via hotplug
>[    4.762303] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    4.762305] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    4.762528] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    4.762531] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    4.762532] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    4.762533] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    4.763279] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    4.763280] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    4.763281] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    4.763282] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:31:VGA-1] status updated from unknown to disconnected
>[    4.763285] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:31:VGA-1] disconnected
>[    4.763301] [drm:drm_setup_crtcs] 
>[    4.763302] [drm:drm_enable_connectors] connector 34 enabled? yes
>[    4.763303] [drm:drm_enable_connectors] connector 31 enabled? no
>[    4.763305] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    4.763306] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    4.763307] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1920x1080
>[    4.763308] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    4.763310] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 21 (0,0)
>[    4.763311] [drm:intelfb_create] re-using BIOS fb
>[    4.763331] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo ffff880888624000
>[    4.763400] fbcon: inteldrmfb (fb0) is primary device
>[    4.763462] [drm:connected_sink_compute_bpp] [CONNECTOR:34:eDP-1] checking for sink bpp constrains
>[    4.763463] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18
>[    4.763465] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 139000KHz
>[    4.763466] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
>[    4.763467] [drm:intel_dp_compute_config] DP link bw required 250200 available 432000
>[    4.763468] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[    4.763470] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff880889da5000 for pipe A
>[    4.763471] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    4.763471] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[    4.763472] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.763473] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
>[    4.763474] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    4.763474] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    4.763475] [drm:intel_dump_pipe_config] requested mode:
>[    4.763476] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139000 1920 1968 2000 2080 1080 1083 1088 1113 0x48 0xa
>[    4.763477] [drm:intel_dump_pipe_config] adjusted mode:
>[    4.763478] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139000 1920 1968 2000 2080 1080 1083 1088 1113 0x48 0xa
>[    4.763479] [drm:intel_dump_crtc_timings] crtc timings: 139000 1920 1968 2000 2080 1080 1083 1088 1113, type: 0x48 flags: 0xa
>[    4.763480] [drm:intel_dump_pipe_config] port clock: 270000
>[    4.763481] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    4.763481] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    4.763482] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.763483] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    4.763483] [drm:intel_dump_pipe_config] ips: 0
>[    4.763483] [drm:intel_dump_pipe_config] double wide: 0
>[    4.763484] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    4.763484] [drm:intel_dump_pipe_config] planes on this crtc
>[    4.763486] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
>[    4.763487] [drm:intel_dump_pipe_config] 	FB:43, fb = 1920x1080 format = 0x34325258
>[    4.763487] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
>[    4.763488] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[    4.763489] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    4.763501] [drm:intel_edp_backlight_off] 
>[    4.910042] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    4.923363] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    4.960588] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    4.962593] ata1.00: supports DRM functions and may not be fully accessible
>[    4.962731] ata1.00: READ LOG DMA EXT failed, trying unqueued
>[    4.962789] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[    4.962790] ata1.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0CB6Q, max UDMA/133
>[    4.962791] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    4.963081] ata1.00: supports DRM functions and may not be fully accessible
>[    4.963118] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[    4.963120] ata1.00: configured for UDMA/133
>[    4.963327] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  CB6Q PQ: 0 ANSI: 5
>[    4.966668] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    4.966671] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling
>[    4.966679] [drm:intel_disable_pipe] disabling pipe A
>[    4.976710] usb 3-5: new full-speed USB device number 2 using xhci_hcd
>[    4.980482] [drm:edp_panel_off] Turn eDP port A panel power off
>[    4.980487] [drm:wait_panel_off] Wait for panel power off time
>[    4.980494] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000
>[    5.033252] [drm:wait_panel_status] Wait complete
>[    5.033262] [drm:intel_power_well_enable] enabling display
>[    5.033263] [drm:hsw_set_power_well] Enabling power well
>[    5.034434] hub 1-1:1.0: USB hub found
>[    5.034521] hub 1-1:1.0: 6 ports detected
>[    5.035299] [drm:edp_panel_on] Turn eDP port A panel power on
>[    5.035304] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    5.047548] hub 2-1:1.0: USB hub found
>[    5.047642] hub 2-1:1.0: 8 ports detected
>[    5.270065] tsc: Refined TSC clocksource calibration: 2793.531 MHz
>[    5.270067] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284461bc4f9, max_idle_ns: 440795228872 ns
>[    5.304788] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    5.308084] ata2.00: ATAPI: hp       DVDRW  SU208FB, HH01, max UDMA/100
>[    5.310068] usb 3-7: new high-speed USB device number 3 using xhci_hcd
>[    5.310854] ata2.00: configured for UDMA/100
>[    5.312557] scsi 1:0:0:0: CD-ROM            hp       DVDRW  SU208FB   HH01 PQ: 0 ANSI: 5
>[    5.583394] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
>[    5.603494] [drm:wait_panel_status] Wait complete
>[    5.603499] [drm:wait_panel_on] Wait for panel power on
>[    5.603502] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    5.631316] ata3: SATA link down (SStatus 0 SControl 300)
>[    5.683388] usb 3-12: new full-speed USB device number 4 using xhci_hcd
>[    5.804384] [drm:wait_panel_status] Wait complete
>[    5.804397] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    5.804404] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    5.806328] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    5.806329] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    5.806329] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    5.807789] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[    5.809541] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[    5.809626] [drm:intel_enable_pipe] enabling pipe A
>[    5.810062] [drm:intel_edp_backlight_on] 
>[    5.810063] [drm:intel_panel_enable_backlight] pipe A
>[    5.810074] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4882
>[    5.810087] [drm:intel_psr_enable] PSR not supported by this panel
>[    5.810088] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[    5.810090] [drm:set_no_fbc_reason] Disabling FBC: disabled per chip default
>[    5.826455] [drm:intel_power_well_disable] disabling display
>[    5.826456] [drm:hsw_set_power_well] Requesting to disable the power well
>[    5.826461] [drm:intel_connector_check_state] [CONNECTOR:34:eDP-1]
>[    5.826463] [drm:check_encoder_state] [ENCODER:32:DAC-32]
>[    5.826465] [drm:check_encoder_state] [ENCODER:33:TMDS-33]
>[    5.826467] [drm:check_crtc_state] [CRTC:21]
>[    5.826474] [drm:check_shared_dpll_state] WRPLL 1
>[    5.826475] [drm:check_shared_dpll_state] WRPLL 2
>[    5.826476] [drm:check_shared_dpll_state] SPLL
>[    5.826484] [drm:drm_fb_helper_hotplug_event] 
>[    5.826485] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:eDP-1]
>[    5.826486] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1]
>[    5.827373] [drm:intel_dp_probe_oui] Sink OUI: 00e04c
>[    5.828247] [drm:intel_dp_probe_oui] Branch OUI: 00e04c
>[    5.829558] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    5.829561] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:eDP-1] probed modes :
>[    5.829562] [drm:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 139000 1920 1968 2000 2080 1080 1083 1088 1113 0x48 0xa
>[    5.829563] [drm:drm_mode_debug_printmodeline] Modeline 36:"1920x1080" 40 92670 1920 1968 2000 2080 1080 1083 1088 1113 0x40 0xa
>[    5.829563] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:31:VGA-1]
>[    5.829564] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1
>[    5.829580] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    5.829580] [drm:intel_crt_detect] CRT not detected via hotplug
>[    5.829791] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    5.829791] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    5.829961] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    5.829961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    5.829962] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    5.829962] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    5.830977] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    5.830977] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    5.830977] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    5.830978] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:31:VGA-1] disconnected
>[    5.830980] [drm:drm_setup_crtcs] 
>[    5.830981] [drm:drm_enable_connectors] connector 34 enabled? yes
>[    5.830982] [drm:drm_enable_connectors] connector 31 enabled? no
>[    5.830983] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    5.830983] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    5.830984] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1920x1080
>[    5.830984] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    5.830985] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 21 (0,0)
>[    5.831023] Console: switching to colour frame buffer device 240x67
>[    5.833747] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    5.940477] ata4: SATA link down (SStatus 0 SControl 300)
>[    6.250554] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    6.252541] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    6.252594] ata5.00: supports DRM functions and may not be fully accessible
>[    6.252706] ata5.00: READ LOG DMA EXT failed, trying unqueued
>[    6.252768] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
>[    6.252769] ata5.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0CB6Q, max UDMA/133
>[    6.252770] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    6.252977] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    6.252997] ata5.00: supports DRM functions and may not be fully accessible
>[    6.253033] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
>[    6.253035] ata5.00: configured for UDMA/133
>[    6.253231] scsi 4:0:0:0: Direct-Access     ATA      Samsung SSD 840  CB6Q PQ: 0 ANSI: 5
>[    6.270085] clocksource: Switched to clocksource tsc
>[    6.282503] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    6.282526] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    6.282536] sd 0:0:0:0: [sda] Write Protect is off
>[    6.282539] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    6.282549] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    6.282572] sd 4:0:0:0: [sdb] Write Protect is off
>[    6.282574] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    6.282585] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    6.285857] sr 1:0:0:0: [sr0] scsi3-mmc drive: 47x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>[    6.285858] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    6.285922]  sdb: sdb1 sdb2 sdb3
>[    6.285928] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    6.286150] sd 4:0:0:0: [sdb] Attached SCSI disk
>[    6.353397] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[    6.356628] [drm:gen6_enable_rps] Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz
>[    6.400099]  sda: sda1 sda2
>[    6.400656] sd 0:0:0:0: [sda] Attached SCSI disk
>[    7.144113] PM: Starting manual resume from disk
>[    7.144117] PM: Hibernation image partition 8:19 present
>[    7.144118] PM: Looking for hibernation image.
>[    7.144290] PM: Image not found (code -22)
>[    7.144292] PM: Hibernation image not present or could not be loaded.
>[    7.268926] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
>[    7.355802] systemd-journald[86]: Received SIGTERM from PID 1 (systemd).
>[    7.620366] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    7.830356] EXT4-fs (sdb2): re-mounted. Opts: data=ordered
>[    7.958920] FS-Cache: Loaded
>[    7.973718] RPC: Registered named UNIX socket transport module.
>[    7.973718] RPC: Registered udp transport module.
>[    7.973718] RPC: Registered tcp transport module.
>[    7.973719] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    7.991776] FS-Cache: Netfs 'nfs' registered for caching
>[    8.053027] ACPI: AC Adapter [AC] (on-line)
>[    8.069166] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
>[    8.073153] Initializing HPQ6001 module
>[    8.075244] systemd-journald[252]: Received request to flush runtime journal from PID 1
>[    8.092859] ACPI: Battery Slot [BAT0] (battery present)
>[    8.092917] ACPI: Battery Slot [BAT1] (battery absent)
>[    8.092972] input: HP Wireless hotkeys as /devices/virtual/input/input10
>[    8.093243] wmi: Mapper loaded
>[    8.111895] thermal LNXTHERM:00: registered as thermal_zone0
>[    8.111897] ACPI: Thermal Zone [CPUZ] (50 C)
>[    8.117244] hp_accel: laptop model unknown, using default axes configuration
>[    8.133237] tpm_tis 00:07: 1.2 TPM (device-id 0x1A, rev-id 16)
>[    8.218008] EDAC MC: Ver: 3.0.0
>[    8.224232] EDAC ie31200: No ECC support
>[    8.224306] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    8.231920] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=244/4882
>[    8.231922] [drm:intel_panel_actually_set_backlight] set backlight PWM = 244
>[    8.247204] lis3lv02d: 8 bits 3DC sensor found
>[    8.252010] pps_core: LinuxPPS API ver. 1 registered
>[    8.252012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    8.254807] PTP clock support registered
>[    8.269655] media: Linux media interface: v0.10
>[    8.273700] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    8.273701] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    8.273846] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    8.296705] Linux video capture interface: v2.00
>[    8.310695] Bluetooth: Core ver 2.21
>[    8.310706] NET: Registered protocol family 31
>[    8.310707] Bluetooth: HCI device and connection manager initialized
>[    8.310709] Bluetooth: HCI socket layer initialized
>[    8.310711] Bluetooth: L2CAP socket layer initialized
>[    8.310714] Bluetooth: SCO socket layer initialized
>[    8.320404] usbcore: registered new interface driver btusb
>[    8.327596] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b477)
>[    8.328688] uvcvideo 3-7:1.0: Entity type for entity Extension 5 was not initialized!
>[    8.328691] uvcvideo 3-7:1.0: Entity type for entity Extension 2 was not initialized!
>[    8.328692] uvcvideo 3-7:1.0: Entity type for entity Processing 3 was not initialized!
>[    8.328693] uvcvideo 3-7:1.0: Entity type for entity Camera 1 was not initialized!
>[    8.328736] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input11
>[    8.328765] usbcore: registered new interface driver uvcvideo
>[    8.328765] USB Video Class driver (1.1.1)
>[    8.332637] Bluetooth: hci0: read Intel version: 370710018002030d00
>[    8.354912] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
>[    8.379559] thermal LNXTHERM:01: registered as thermal_zone1
>[    8.379562] ACPI: Thermal Zone [GFXZ] (47 C)
>[    8.395205] Intel(R) Wireless WiFi driver for Linux
>[    8.395207] Copyright(c) 2003- 2015 Intel Corporation
>[    8.395405] iwlwifi 0000:3d:00.0: enabling device (0000 -> 0002)
>[    8.395975] iwlwifi 0000:3d:00.0: Direct firmware load for iwlwifi-7260-17.ucode failed with error -2
>[    8.414484] iwlwifi 0000:3d:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
>[    8.423728] parport_pc 00:04: reported by Plug and Play ACPI
>[    8.423797] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
>[    8.439754] iwlwifi 0000:3d:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
>[    8.439956] iwlwifi 0000:3d:00.0: L1 Enabled - LTR Enabled
>[    8.440479] iwlwifi 0000:3d:00.0: L1 Enabled - LTR Enabled
>[    8.476261] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    8.476264] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 38:63:bb:ca:bd:1b
>[    8.476265] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    8.476293] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    8.476376] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
>[    8.480399] random: nonblocking pool is initialized
>[    8.493496] input: PC Speaker as /devices/platform/pcspkr/input/input12
>[    8.493929] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    8.497866] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3228: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    8.497869] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    8.497871] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>[    8.497872] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    8.497873] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    8.497875] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
>[    8.497877] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
>[    8.504538] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
>[    8.505229] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
>[    8.505286] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
>[    8.532641] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
>[    8.541518] AVX2 version of gcm_enc/dec engaged.
>[    8.541521] AES CTR mode by8 optimization enabled
>[    8.582142] Adding 33203200k swap on /dev/sdb3.  Priority:-1 extents:1 across:33203200k SSFS
>[    8.597788] intel_rapl: Found RAPL domain package
>[    8.597791] intel_rapl: Found RAPL domain core
>[    8.597793] intel_rapl: Found RAPL domain uncore
>[    8.597794] intel_rapl: Found RAPL domain dram
>[    8.623633] ppdev: user-space parallel port driver
>[    8.624739] e1000e 0000:00:19.0 enp0s25: renamed from eth0
>[    8.625508] iTCO_vendor_support: vendor-support=0
>[    8.625902] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    8.625926] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[    8.625971] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    8.629651] input: HP WMI hotkeys as /devices/virtual/input/input18
>[    8.656922] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    8.657846] iwlwifi 0000:3d:00.0 wlp61s0: renamed from wlan0
>[    8.776568] thermal LNXTHERM:02: registered as thermal_zone3
>[    8.776570] ACPI: Thermal Zone [EXTZ] (85 C)
>[    8.836532] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    8.836541] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    9.161656] thermal LNXTHERM:03: registered as thermal_zone4
>[    9.161659] ACPI: Thermal Zone [LOCZ] (85 C)
>[    9.545882] thermal LNXTHERM:04: registered as thermal_zone5
>[    9.545886] ACPI: Thermal Zone [BATZ] (31 C)
>[    9.546150] thermal LNXTHERM:05: registered as thermal_zone6
>[    9.546152] ACPI: Thermal Zone [PCHZ] (0 C)
>[    9.570001] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input19
>[    9.586052] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input14
>[   10.299972] mousedev: PS/2 mouse device common for all mice
>[   11.084120] psmouse serio3: synaptics: queried max coordinates: x [..5660], y [..4730]
>[   11.116924] psmouse serio3: synaptics: queried min coordinates: x [1324..], y [1248..]
>[   11.174314] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26800/0x0, board id: 2706, fw id: 1486004
>[   11.210578] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input20
>[   29.078915] [drm:i915_gem_open] 
>[   29.078928] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   29.122522] [drm:i915_gem_open] 
>[   29.158679] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   29.160241] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   29.160250] [drm:drm_mode_addfb2] [FB:44]
>[   29.160384] [drm:internal_framebuffer_create] could not create framebuffer
>[   29.160386] [drm:internal_framebuffer_create] could not create framebuffer
>[   29.160392] [drm:drm_mode_addfb2] [FB:44]
>[   29.160480] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   29.160482] [drm:drm_mode_getresources] [CRTC:21:crtc-0]
>[   29.160483] [drm:drm_mode_getresources] [CRTC:25:crtc-1]
>[   29.160484] [drm:drm_mode_getresources] [CRTC:29:crtc-2]
>[   29.160485] [drm:drm_mode_getresources] [ENCODER:32:DAC-32]
>[   29.160486] [drm:drm_mode_getresources] [ENCODER:33:TMDS-33]
>[   29.160487] [drm:drm_mode_getresources] [CONNECTOR:34:eDP-1]
>[   29.160488] [drm:drm_mode_getresources] [CONNECTOR:31:VGA-1]
>[   29.160489] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[   29.160545] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
>[   29.160574] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
>[   29.172749] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   29.172764] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   29.219592] [drm:drm_mode_addfb2] [FB:44]
>[   29.314509] [drm:drm_mode_setcrtc] [CRTC:21:crtc-0]
>[   29.314514] [drm:drm_mode_setcrtc] [CONNECTOR:34:eDP-1]
>[   29.491822] [drm:i915_gem_open] 
>[   29.515110] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[   30.836531] [drm:i915_gem_open] 
>[   31.172160] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
>[   31.172165] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:eDP-1]
>[   31.172166] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1]
>[   31.172177] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   31.172185] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   31.173061] [drm:intel_dp_probe_oui] Sink OUI: 00e04c
>[   31.173920] [drm:intel_dp_probe_oui] Branch OUI: 00e04c
>[   31.175185] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   31.175198] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:eDP-1] probed modes :
>[   31.175201] [drm:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 139000 1920 1968 2000 2080 1080 1083 1088 1113 0x48 0xa
>[   31.175203] [drm:drm_mode_debug_printmodeline] Modeline 36:"1920x1080" 40 92670 1920 1968 2000 2080 1080 1083 1088 1113 0x40 0xa
>[   31.175206] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
>[   31.175352] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   31.175354] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:31:VGA-1]
>[   31.175355] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1
>[   31.175364] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   31.175365] [drm:intel_crt_detect] CRT not detected via hotplug
>[   31.175527] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   31.175528] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   31.175686] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   31.175687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   31.175689] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   31.175690] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   31.176714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   31.176716] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   31.176717] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   31.176718] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:31:VGA-1] disconnected
>[   34.179367] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[   34.179381] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   64.930845] PM: Hibernation mode set to 'platform'
>[   70.532453] PM: Syncing filesystems ... done.
>[   70.606756] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[   70.608110] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[   70.608112] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
>[   70.608113] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[   70.608116] PM: Marking nosave pages: [mem 0x1f852000-0x1f852fff]
>[   70.608117] PM: Marking nosave pages: [mem 0x1f85b000-0x1f85cfff]
>[   70.608117] PM: Marking nosave pages: [mem 0x1f86c000-0x1f86dfff]
>[   70.608118] PM: Marking nosave pages: [mem 0x1f884000-0x1f884fff]
>[   70.608119] PM: Marking nosave pages: [mem 0x2ab7f000-0x2bffefff]
>[   70.608179] PM: Marking nosave pages: [mem 0x2c000000-0xffffffff]
>[   70.609405] PM: Basic memory bitmaps created
>[   70.609441] PM: Preallocating image memory... done (allocated 273635 pages)
>[   71.024975] PM: Allocated 1094540 kbytes in 0.41 seconds (2669.60 MB/s)
>[   71.024977] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[   71.115427] parport_pc 00:04: disabled
>[   71.115620] [drm:intel_power_well_enable] enabling display
>[   71.115625] [drm:hsw_set_power_well] Enabling power well
>[   71.115928] [drm:connected_sink_compute_bpp] [CONNECTOR:34:eDP-1] checking for sink bpp constrains
>[   71.115931] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18
>[   71.115934] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 139000KHz
>[   71.115936] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
>[   71.115937] [drm:intel_dp_compute_config] DP link bw required 250200 available 432000
>[   71.115939] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[   71.115941] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff880880c43800 for pipe A
>[   71.115942] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[   71.115942] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   71.115944] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   71.115945] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
>[   71.115946] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   71.115947] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   71.115948] [drm:intel_dump_pipe_config] requested mode:
>[   71.115950] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139000 1920 1968 2000 2080 1080 1083 1088 1113 0x48 0xa
>[   71.115951] [drm:intel_dump_pipe_config] adjusted mode:
>[   71.115952] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139000 1920 1968 2000 2080 1080 1083 1088 1113 0x48 0xa
>[   71.115954] [drm:intel_dump_crtc_timings] crtc timings: 139000 1920 1968 2000 2080 1080 1083 1088 1113, type: 0x48 flags: 0xa
>[   71.115954] [drm:intel_dump_pipe_config] port clock: 270000
>[   71.115955] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[   71.115956] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[   71.115957] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   71.115958] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   71.115959] [drm:intel_dump_pipe_config] ips: 0
>[   71.115960] [drm:intel_dump_pipe_config] double wide: 0
>[   71.115961] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   71.115962] [drm:intel_dump_pipe_config] planes on this crtc
>[   71.115963] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
>[   71.115964] [drm:intel_dump_pipe_config] 	FB:43, fb = 1920x1080 format = 0x34325258
>[   71.115966] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 1920x1080 dst (0, 0) 1920x1080
>[   71.115967] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[   71.115968] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[   71.115983] [drm:intel_edp_backlight_off] 
>[   71.318529] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[   71.318546] [drm:intel_disable_pipe] disabling pipe A
>[   71.330144] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   71.330155] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   71.330600] [drm:edp_panel_off] Turn eDP port A panel power off
>[   71.330604] [drm:wait_panel_off] Wait for panel power off time
>[   71.330607] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[   71.390846] [drm:wait_panel_status] Wait complete
>[   71.390866] [drm:intel_connector_check_state] [CONNECTOR:34:eDP-1]
>[   71.390869] [drm:check_encoder_state] [ENCODER:32:DAC-32]
>[   71.390871] [drm:check_encoder_state] [ENCODER:33:TMDS-33]
>[   71.390872] [drm:check_crtc_state] [CRTC:21]
>[   71.390875] [drm:check_shared_dpll_state] WRPLL 1
>[   71.390876] [drm:check_shared_dpll_state] WRPLL 2
>[   71.390877] [drm:check_shared_dpll_state] SPLL
>[   71.394067] [drm:intel_power_well_disable] disabling display
>[   71.394070] [drm:hsw_set_power_well] Requesting to disable the power well
>[   71.394071] [drm:intel_power_well_disable] disabling always-on
>[   71.394126] PM: freeze of devices complete after 367.869 msecs
>[   71.394128] hibernation debug: Waiting for 5 seconds.
>[   76.463771] usb usb3: root hub lost power or was reset
>[   76.463774] usb usb4: root hub lost power or was reset
>[   76.463779] usb usb1: root hub lost power or was reset
>[   76.463848] usb usb2: root hub lost power or was reset
>[   76.465185] [drm:intel_opregion_setup] graphic opregion physical addr: 0x2bf62018
>[   76.465200] [drm:intel_opregion_setup] Public ACPI methods supported
>[   76.465201] [drm:intel_opregion_setup] SWSCI supported
>[   76.467663] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[   76.467722] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[   76.470363] [drm:swsci_setup] SWSCI BIOS requested (00400081) SBCB callbacks that are not supported (00200181)
>[   76.470365] [drm:swsci_setup] SWSCI GBDA callbacks 000000b3, SBCB callbacks 00400081
>[   76.470365] [drm:intel_opregion_setup] ASLE supported
>[   76.470366] [drm:intel_opregion_setup] ASLE extension supported
>[   76.470367] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[   76.474833] sd 0:0:0:0: [sda] Starting disk
>[   76.474840] sd 4:0:0:0: [sdb] Starting disk
>[   76.545265] [drm:intel_power_well_enable] enabling always-on
>[   76.545276] [drm:intel_power_well_disable] disabling always-on
>[   76.545281] [drm:intel_crt_reset] crt adpa set to 0xf40000
>[   76.547493] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz
>[   76.547544] [drm:intel_power_well_enable] enabling always-on
>[   76.547546] [drm:intel_power_well_disable] disabling always-on
>[   76.547547] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: disabled
>[   76.547549] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled
>[   76.547550] [drm:intel_modeset_readout_hw_state] [CRTC:29] hw state readout: disabled
>[   76.547551] [drm:intel_power_well_enable] enabling always-on
>[   76.547552] [drm:intel_power_well_disable] disabling always-on
>[   76.547553] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[   76.547554] [drm:intel_power_well_enable] enabling always-on
>[   76.547555] [drm:intel_power_well_disable] disabling always-on
>[   76.547556] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[   76.547557] [drm:intel_power_well_enable] enabling always-on
>[   76.547558] [drm:intel_power_well_disable] disabling always-on
>[   76.547558] [drm:intel_modeset_readout_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0
>[   76.547560] [drm:intel_power_well_enable] enabling always-on
>[   76.547561] [drm:intel_power_well_disable] disabling always-on
>[   76.547562] [drm:intel_modeset_readout_hw_state] [ENCODER:32:DAC-32] hw state readout: disabled, pipe A
>[   76.547563] [drm:intel_power_well_enable] enabling always-on
>[   76.547564] [drm:intel_power_well_disable] disabling always-on
>[   76.547565] [drm:intel_modeset_readout_hw_state] [ENCODER:33:TMDS-33] hw state readout: disabled, pipe A
>[   76.547566] [drm:intel_power_well_enable] enabling always-on
>[   76.547567] [drm:intel_power_well_disable] disabling always-on
>[   76.547568] [drm:intel_modeset_readout_hw_state] [CONNECTOR:34:eDP-1] hw state readout: disabled
>[   76.547569] [drm:intel_power_well_enable] enabling always-on
>[   76.547570] [drm:intel_power_well_disable] disabling always-on
>[   76.547571] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:VGA-1] hw state readout: disabled
>[   76.547574] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff880880c43800 for pipe A
>[   76.547575] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   76.547576] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   76.547577] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   76.547578] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   76.547579] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   76.547580] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   76.547581] [drm:intel_dump_pipe_config] requested mode:
>[   76.547583] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   76.547584] [drm:intel_dump_pipe_config] adjusted mode:
>[   76.547586] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   76.547587] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   76.547588] [drm:intel_dump_pipe_config] port clock: 0
>[   76.547589] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   76.547590] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[   76.547591] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   76.547592] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   76.547593] [drm:intel_dump_pipe_config] ips: 0
>[   76.547593] [drm:intel_dump_pipe_config] double wide: 0
>[   76.547595] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   76.547595] [drm:intel_dump_pipe_config] planes on this crtc
>[   76.547597] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
>[   76.547598] [drm:intel_dump_pipe_config] 	FB:43, fb = 1920x1080 format = 0x34325258
>[   76.547600] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
>[   76.547601] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[   76.547602] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[   76.547603] ------------[ cut here ]------------
>[   76.547626] WARNING: CPU: 3 PID: 140 at drivers/gpu/drm/i915/intel_uncore.c:599 hsw_unclaimed_reg_debug+0x6a/0x90 [i915]()
>[   76.547627] Unclaimed register detected after reading register 0x70008
>[   76.547628] Modules linked in: mousedev joydev arc4 iTCO_wdt iTCO_vendor_support hp_wmi sparse_keymap mxm_wmi ppdev intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd snd_hda_codec_realtek input_leds snd_hda_codec_generic psmouse serio_raw pcspkr i2c_i801 iwlmvm mac80211 tpm_infineon iwlwifi rtsx_pci_ms memstick cfg80211 snd_hda_intel snd_hda_codec lpc_ich snd_hda_core snd_hwdep snd_pcm uvcvideo btusb snd_timer snd videobuf2_vmalloc btrtl btbcm videobuf2_memops videobuf2_v4l2 btintel soundcore bluetooth videobuf2_core videodev rfkill e1000e media ptp pps_core mei_me shpchp ie31200_edac mei edac_core hp_accel led_class lis3lv02d input_polldev
>[   76.547661]  parport_pc thermal tpm_tis evdev wmi hp_wireless parport tpm fjes mac_hid battery ac processor sch_fq_codel nfs lockd grace sunrpc fscache acpi_call(O) ip_tables x_tables ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod rtsx_pci_sdmmc mmc_core atkbd libps2 ahci libahci i915 libata i2c_algo_bit drm_kms_helper xhci_pci scsi_mod syscopyarea ehci_pci sysfillrect xhci_hcd sysimgblt fb_sys_fops ehci_hcd rtsx_pci drm usbcore usb_common intel_gtt i8042 serio video button
>[   76.547688] CPU: 3 PID: 140 Comm: kworker/u16:6 Tainted: G           O    4.5.4-1-ARCH #1
>[   76.547689] Hardware name: Hewlett-Packard HP Zbook 17 G2/2255, BIOS M70 Ver. 01.12 09/23/2015
>[   76.547694] Workqueue: events_unbound async_run_entry_fn
>[   76.547695]  0000000000000086 0000000080228bc7 ffff8808885f7b58 ffffffff812dd982
>[   76.547697]  ffff8808885f7ba0 ffffffffa032bc18 ffff8808885f7b90 ffffffff81079042
>[   76.547699]  ffff880888600000 ffff880888600080 0000000000000000 0000000000000206
>[   76.547701] Call Trace:
>[   76.547706]  [<ffffffff812dd982>] dump_stack+0x63/0x81
>[   76.547711]  [<ffffffff81079042>] warn_slowpath_common+0x82/0xc0
>[   76.547713]  [<ffffffff810790dc>] warn_slowpath_fmt+0x5c/0x80
>[   76.547723]  [<ffffffffa02998da>] hsw_unclaimed_reg_debug+0x6a/0x90 [i915]
>[   76.547731]  [<ffffffffa029d125>] gen6_read32+0xd5/0x200 [i915]
>[   76.547740]  [<ffffffffa02a0c20>] ? hsw_write64+0x1b0/0x1b0 [i915]
>[   76.547750]  [<ffffffffa02c516f>] intel_modeset_setup_hw_state+0x6df/0xe40 [i915]
>[   76.547760]  [<ffffffffa02c893f>] intel_display_resume+0xff/0x150 [i915]
>[   76.547767]  [<ffffffffa02411d4>] i915_drm_resume+0xd4/0x170 [i915]
>[   76.547773]  [<ffffffffa0241295>] i915_pm_resume+0x25/0x30 [i915]
>[   76.547776]  [<ffffffff81324ab9>] pci_pm_restore+0x79/0xb0
>[   76.547778]  [<ffffffff81324a40>] ? pci_pm_suspend_noirq+0x180/0x180
>[   76.547780]  [<ffffffff81414c1f>] dpm_run_callback+0x4f/0x170
>[   76.547782]  [<ffffffff814151f3>] device_resume+0xd3/0x1f0
>[   76.547784]  [<ffffffff8141532d>] async_resume+0x1d/0x50
>[   76.547786]  [<ffffffff810999b8>] async_run_entry_fn+0x48/0x150
>[   76.547788]  [<ffffffff81091285>] process_one_work+0x1e5/0x480
>[   76.547790]  [<ffffffff81091568>] worker_thread+0x48/0x4e0
>[   76.547792]  [<ffffffff81091520>] ? process_one_work+0x480/0x480
>[   76.547794]  [<ffffffff810971f8>] kthread+0xd8/0xf0
>[   76.547795]  [<ffffffff81097120>] ? kthread_worker_fn+0x170/0x170
>[   76.547798]  [<ffffffff815b59ff>] ret_from_fork+0x3f/0x70
>[   76.547799]  [<ffffffff81097120>] ? kthread_worker_fn+0x170/0x170
>[   76.547800] ---[ end trace bc19c79f66a2f246 ]---
>[   76.547802] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff880880c44400 for pipe B
>[   76.547803] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   76.547804] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   76.547805] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   76.547806] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   76.547807] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   76.547808] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   76.547809] [drm:intel_dump_pipe_config] requested mode:
>[   76.547810] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   76.547811] [drm:intel_dump_pipe_config] adjusted mode:
>[   76.547812] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   76.547814] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   76.547814] [drm:intel_dump_pipe_config] port clock: 0
>[   76.547815] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   76.547816] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[   76.547817] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   76.547818] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   76.547819] [drm:intel_dump_pipe_config] ips: 0
>[   76.547820] [drm:intel_dump_pipe_config] double wide: 0
>[   76.547821] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   76.547822] [drm:intel_dump_pipe_config] planes on this crtc
>[   76.547823] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
>[   76.547824] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
>[   76.547825] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
>[   76.547827] [drm:intel_dump_pipe_config] [CRTC:29][setup_hw_state] config ffff880880c40c00 for pipe C
>[   76.547827] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   76.547828] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   76.547829] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   76.547830] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   76.547831] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   76.547832] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   76.547833] [drm:intel_dump_pipe_config] requested mode:
>[   76.547834] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   76.547835] [drm:intel_dump_pipe_config] adjusted mode:
>[   76.547836] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   76.547838] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   76.547838] [drm:intel_dump_pipe_config] port clock: 0
>[   76.547839] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   76.547840] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[   76.547841] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   76.547842] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   76.547843] [drm:intel_dump_pipe_config] ips: 0
>[   76.547844] [drm:intel_dump_pipe_config] double wide: 0
>[   76.547844] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   76.547845] [drm:intel_dump_pipe_config] planes on this crtc
>[   76.547846] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
>[   76.547847] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
>[   76.547848] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
>[   76.547856] [drm:connected_sink_compute_bpp] [CONNECTOR:34:eDP-1] checking for sink bpp constrains
>[   76.547857] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18
>[   76.547860] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 139000KHz
>[   76.547862] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
>[   76.547863] [drm:intel_dp_compute_config] DP link bw required 250200 available 432000
>[   76.547865] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[   76.547866] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff880880c45400 for pipe A
>[   76.547867] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[   76.547868] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   76.547869] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   76.547870] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4858402, gmch_n: 8388608, link_m: 269911, link_n: 524288, tu: 64
>[   76.547871] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   76.547872] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   76.547873] [drm:intel_dump_pipe_config] requested mode:
>[   76.547874] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139000 1920 1968 2000 2080 1080 1083 1088 1113 0x48 0xa
>[   76.547875] [drm:intel_dump_pipe_config] adjusted mode:
>[   76.547877] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 139000 1920 1968 2000 2080 1080 1083 1088 1113 0x48 0xa
>[   76.547878] [drm:intel_dump_crtc_timings] crtc timings: 139000 1920 1968 2000 2080 1080 1083 1088 1113, type: 0x48 flags: 0xa
>[   76.547879] [drm:intel_dump_pipe_config] port clock: 270000
>[   76.547880] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[   76.547881] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[   76.547882] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   76.547882] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   76.547883] [drm:intel_dump_pipe_config] ips: 0
>[   76.547884] [drm:intel_dump_pipe_config] double wide: 0
>[   76.547885] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   76.547886] [drm:intel_dump_pipe_config] planes on this crtc
>[   76.547887] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
>[   76.547888] [drm:intel_dump_pipe_config] 	FB:43, fb = 1920x1080 format = 0x34325258
>[   76.547889] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
>[   76.547890] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[   76.547891] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[   76.547901] [drm:intel_power_well_enable] enabling always-on
>[   76.547902] [drm:intel_power_well_enable] enabling display
>[   76.547904] [drm:hsw_set_power_well] Enabling power well
>[   76.549988] [drm:edp_panel_on] Turn eDP port A panel power on
>[   76.549997] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[   76.550002] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[   76.550004] [drm:wait_panel_status] Wait complete
>[   76.550008] [drm:wait_panel_on] Wait for panel power on
>[   76.550010] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[   76.568493] pciehp 0000:3c:03.0:pcie24: Device 0000:5f:00.0 already exists at 0000:5f:00, cannot hot-add
>[   76.568499] pciehp 0000:3c:03.0:pcie24: Cannot add device at 0000:5f:00
>[   76.761734] [drm:wait_panel_status] Wait complete
>[   76.761743] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   76.761751] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   76.762185] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
>[   76.763659] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[   76.763660] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[   76.763661] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[   76.765064] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[   76.766766] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[   76.766804] [drm:intel_enable_pipe] enabling pipe A
>[   76.767224] [drm:intel_edp_backlight_on] 
>[   76.767226] [drm:intel_panel_enable_backlight] pipe A
>[   76.767231] [drm:intel_panel_actually_set_backlight] set backlight PWM = 244
>[   76.768340] [drm:intel_psr_enable] PSR not supported by this panel
>[   76.768342] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[   76.778378] usb 1-1: reset high-speed USB device number 2 using ehci-pci
>[   76.783651] [drm:intel_power_well_disable] disabling display
>[   76.783654] [drm:hsw_set_power_well] Requesting to disable the power well
>[   76.783656] [drm:intel_power_well_enable] enabling display
>[   76.783657] [drm:hsw_set_power_well] Enabling power well
>[   76.785019] [drm:intel_power_well_disable] disabling display
>[   76.785024] [drm:hsw_set_power_well] Requesting to disable the power well
>[   76.785026] [drm:intel_power_well_enable] enabling display
>[   76.785028] [drm:hsw_set_power_well] Enabling power well
>[   76.785037] usb 2-1: reset high-speed USB device number 2 using ehci-pci
>[   76.787100] [drm:intel_power_well_disable] disabling display
>[   76.787105] [drm:hsw_set_power_well] Requesting to disable the power well
>[   76.787111] [drm:intel_connector_check_state] [CONNECTOR:31:VGA-1]
>[   76.787114] [drm:intel_connector_check_state] [CONNECTOR:34:eDP-1]
>[   76.787116] [drm:check_encoder_state] [ENCODER:32:DAC-32]
>[   76.787118] [drm:check_encoder_state] [ENCODER:33:TMDS-33]
>[   76.787119] [drm:check_crtc_state] [CRTC:21]
>[   76.787127] [drm:check_crtc_state] [CRTC:25]
>[   76.787128] [drm:check_crtc_state] [CRTC:29]
>[   76.787129] [drm:check_shared_dpll_state] WRPLL 1
>[   76.787130] [drm:check_shared_dpll_state] WRPLL 2
>[   76.787132] [drm:check_shared_dpll_state] SPLL
>[   76.787147] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1]
>[   76.788006] [drm:intel_dp_probe_oui] Sink OUI: 00e04c
>[   76.788854] [drm:intel_dp_probe_oui] Branch OUI: 00e04c
>[   76.790101] [drm:drm_helper_hpd_irq_event] [CONNECTOR:34:eDP-1] status updated from connected to connected
>[   76.790102] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=0
>[   76.790109] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[   76.799860] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   76.799862] [drm:intel_crt_detect] CRT not detected via hotplug
>[   76.800065] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   76.800067] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   76.800258] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   76.800259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   76.800260] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   76.800262] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   76.801163] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   76.801164] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   76.801165] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   76.801166] [drm:drm_helper_hpd_irq_event] [CONNECTOR:31:VGA-1] status updated from disconnected to disconnected
>[   76.801352] [drm:intel_didl_outputs] 8 outputs detected
>[   76.805144] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[   76.805205] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[   76.805270] ata3: SATA link down (SStatus 0 SControl 300)
>[   76.805287] ata4: SATA link down (SStatus 0 SControl 300)
>[   76.805303] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[   76.805514] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[   76.805562] ata5.00: supports DRM functions and may not be fully accessible
>[   76.805655] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
>[   76.805810] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[   76.805835] ata5.00: supports DRM functions and may not be fully accessible
>[   76.805872] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
>[   76.805875] ata5.00: configured for UDMA/133
>[   76.807226] ata1.00: supports DRM functions and may not be fully accessible
>[   76.807344] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[   76.807536] ata1.00: supports DRM functions and may not be fully accessible
>[   76.807569] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[   76.807572] ata1.00: configured for UDMA/133
>[   76.812854] ata2.00: configured for UDMA/100
>[   76.851790] usb 3-5: reset full-speed USB device number 2 using xhci_hcd
>[   77.185109] usb 3-7: reset high-speed USB device number 3 using xhci_hcd
>[   77.518455] usb 3-12: reset full-speed USB device number 4 using xhci_hcd
>[   77.715256] rtc_cmos 00:03: System wakeup disabled by ACPI
>[   77.715902] parport_pc 00:04: activated
>[   77.827565] PM: restore of devices complete after 1363.945 msecs
>[   77.827597] usb 3-12:1.0: rebind failed: -517
>[   77.827598] usb 3-12:1.1: rebind failed: -517
>[   77.827767] PM: Image restored successfully.
>[   77.827818] PM: Basic memory bitmaps freed
>[   77.827819] Restarting tasks ... done.
>[   77.842354] Bluetooth: hci0: read Intel version: 370710018002030d55
>[   77.842358] Bluetooth: hci0: Intel device is already patched. patch num: 55
>[   77.922103] [drm:drm_mode_setcrtc] [CRTC:21:crtc-0]
>[   77.922109] [drm:drm_mode_setcrtc] [CONNECTOR:34:eDP-1]
>[   77.932923] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
>[   77.932928] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:eDP-1]
>[   77.932930] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1]
>[   77.933787] [drm:intel_dp_probe_oui] Sink OUI: 00e04c
>[   77.934632] [drm:intel_dp_probe_oui] Branch OUI: 00e04c
>[   77.935887] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   77.935891] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:eDP-1] probed modes :
>[   77.935894] [drm:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 139000 1920 1968 2000 2080 1080 1083 1088 1113 0x48 0xa
>[   77.935896] [drm:drm_mode_debug_printmodeline] Modeline 36:"1920x1080" 40 92670 1920 1968 2000 2080 1080 1083 1088 1113 0x40 0xa
>[   77.935899] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
>[   77.936001] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[   77.936003] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:31:VGA-1]
>[   77.936004] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1
>[   77.936008] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   77.936009] [drm:intel_crt_detect] CRT not detected via hotplug
>[   77.936171] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   77.936172] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   77.936328] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   77.936330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   77.936331] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   77.936332] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   77.937062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   77.937063] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   77.937064] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   77.937066] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:31:VGA-1] disconnected
>[   78.333758] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[   78.337046] [drm:gen6_enable_rps] Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz
>[   80.005006] psmouse serio3: synaptics: queried max coordinates: x [..5660], y [..4730]
>[   80.038521] psmouse serio3: synaptics: queried min coordinates: x [1324..], y [1248..]
>[   80.944992] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[   80.945005] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007

Actions: View

Attachments on bug 94628: 124131

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.