Attachment 124736 Details for Bug 96692 – kernel 4.6.2 boot up log

kernel 4.6.2 boot up log

kernel_boot_4.6.2.log (text/x-log), 44.78 KB, created by zhiquan.lee on 2016-06-27 04:25:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: zhiquan.lee

Created: 2016-06-27 04:25:34 UTC

Size: 44.78 KB

patch

obsolete

>Linux version 4.6.2 (gcc version 4.9.1 ) #1 SMP PREEMPT Tue Jun 21 11:55:04 CST 2016
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>Disabled fast string operations
>x86/fpu: Legacy x87 FPU detected.
>x86/fpu: Using 'eager' FPU context switches.
>e820: BIOS-provided physical RAM map:
>BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
>BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
>BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>BIOS-e820: [mem 0x0000000000100000-0x000000005f6dffff] usable
>BIOS-e820: [mem 0x000000005f6e0000-0x000000005f6e2fff] ACPI NVS
>BIOS-e820: [mem 0x000000005f6e3000-0x000000005f6effff] ACPI data
>BIOS-e820: [mem 0x000000005f6f0000-0x000000005f6fffff] reserved
>BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
>NX (Execute Disable) protection: active
>SMBIOS 2.5 present.
>DMI: IBM CORPORATION 4852526/4852526, BIOS X8KT160 04/25/2013
>e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>e820: remove [mem 0x000a0000-0x000fffff] usable
>e820: last_pfn = 0x5f6e0 max_arch_pfn = 0x1000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-through
>  D0000-EFFFF uncachable
>  F0000-FFFFF write-through
>MTRR variable ranges enabled:
>  0 base 000000000 mask FC0000000 write-back
>  1 base 040000000 mask FE0000000 write-back
>  2 base 05F800000 mask FFF800000 uncachable
>  3 base 05F700000 mask FFFF00000 uncachable
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86/PAT: PAT not supported by CPU.
>found SMP MP-table at [mem 0x000f3f80-0x000f3f8f] mapped at [c00f3f80]
>Scanning 1 areas for low memory corruption
>initial memory mapped: [mem 0x00000000-0x025fffff]
>Base memory trampoline at [c008c000] 8c000 size 16384
>BRK [0x020d7000, 0x020d7fff] PGTABLE
>BRK [0x020d8000, 0x020d8fff] PGTABLE
>BRK [0x020d9000, 0x020d9fff] PGTABLE
>BRK [0x020da000, 0x020dafff] PGTABLE
>BRK [0x020db000, 0x020dbfff] PGTABLE
>BRK [0x020dc000, 0x020dcfff] PGTABLE
>ACPI: Early table checksum verification disabled
>ACPI: RSDP 0x00000000000F8510 000014 (v00 IBM   )
>ACPI: RSDT 0x000000005F6E3000 00003C (v01 IBM    RSS      42302E31 AWRD 00000000)
>ACPI: FACP 0x000000005F6E3080 000074 (v01 IBM    RSS      42302E31 AWRD 00000000)
>ACPI: DSDT 0x000000005F6E3100 00523F (v01 IBM    AWRDACPI 00001000 MSFT 03000000)
>ACPI: FACS 0x000000005F6E0000 000040
>ACPI: HPET 0x000000005F6E83C0 000038 (v01 IBM    RSS      42302E31 AWRD 00000098)
>ACPI: MCFG 0x000000005F6E8400 00003C (v01 IBM    RSS      42302E31 AWRD 00000000)
>ACPI: APIC 0x000000005F6E8340 00005A (v01 IBM    RSS      42302E31 AWRD 00000000)
>ACPI: BOOT 0x000000005F6E8440 000028 (v01 IBM    RSS      42302E31 AWRD 00000000)
>ACPI: SLIC 0x000000005F6E8480 000176 (v01 IBM    RSS      42302E31 AWRD 00000000)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at [mem 0x0000000000000000-0x000000005f6dffff]
>NODE_DATA(0) allocated [mem 0x367eb000-0x367ecfff]
>654MB HIGHMEM available.
>871MB LOWMEM available.
>max_low_pfn = 367fe, highstart_pfn = 367fe
>Low memory ends at vaddr f67fe000
>High memory starts at vaddr f67fe000
>  mapped low ram: 0 - 367fe000
>  low ram: 0 - 367fe000
>Node: 0, start_pfn: 1, end_pfn: 9f
>  Setting physnode_map array to node 0 for pfns:
>  0
>Node: 0, start_pfn: 100, end_pfn: 5f6e0
>  Setting physnode_map array to node 0 for pfns:
>  0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000
>Zone ranges:
>  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>  Normal   [mem 0x0000000001000000-0x00000000367fdfff]
>  HighMem  [mem 0x00000000367fe000-0x000000005f6dffff]
>Movable zone start for each node
>Early memory node ranges
>  node   0: [mem 0x0000000000001000-0x000000000009efff]
>  node   0: [mem 0x0000000000100000-0x000000005f6dffff]
>Initmem setup node 0 [mem 0x0000000000001000-0x000000005f6dffff]
>On node 0 totalpages: 390782
>free_area_init_node: node 0, pgdat f67eb000, node_mem_map f58ff028
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3998 pages, LIFO batch:0
>  Normal zone: 2140 pages used for memmap
>  Normal zone: 219134 pages, LIFO batch:31
>  HighMem zone: 167650 pages, LIFO batch:31
>Using APIC driver default
>Reserving Intel graphics stolen memory at 0x5f800000-0x5fffffff
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>smpboot: Allowing 1 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
>PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
>e820: [mem 0x60000000-0xdfffffff] available for PCI devices
>clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
>percpu: Embedded 19 pages/cpu @f58e3000 s45196 r0 d32628 u77824
>pcpu-alloc: s45196 r0 d32628 u77824 alloc=19*4096
>pcpu-alloc: [0] 0
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 388602
>Policy zone: HighMem
>Kernel command line: console=ttyS0,115200 debug drm.debug=0xf ip=dhcp rw
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing CPU#0
>Initializing HighMem for node 0 (000367fe:0005f6e0)
>Initializing Movable for node 0 (00000000:00000000)
>Memory: 1529476K/1563128K available (10867K kernel code, 963K rwdata, 3644K rodata, 836K init, 796K bss, 33652K reserved, 0K cma-reserved, 670600K highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfebb7000 - 0xfffff000   (20768 kB)
>    pkmap   : 0xfe800000 - 0xfea00000   (2048 kB)
>    vmalloc : 0xf6ffe000 - 0xfe7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf67fe000   ( 871 MB)
>      .init : 0xc1f20000 - 0xc1ff1000   ( 836 kB)
>      .data : 0xc1a9d2e4 - 0xc1f1ee40   (4614 kB)
>      .text : 0xc1000000 - 0xc1a9d2e4   (10868 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Preemptible hierarchical RCU implementation.
>        Build-time adjustment of leaf fanout to 32.
>        RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
>RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
>NR_IRQS:16640 nr_irqs:256 16
>CPU 0 irqstacks, hard=f5438000 soft=f543a000
>Console: colour VGA+ 80x25
>console [ttyS0] enabled
>clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>hpet clockevent registered
>tsc: Fast TSC calibration using PIT
>tsc: Detected 997.514 MHz processor
>Calibrating delay loop (skipped), value calculated using timer frequency.. 1995.02 BogoMIPS (lpj=997514)
>pid_max: default: 32768 minimum: 301
>ACPI: Core revision 20160108
>ACPI: 1 ACPI AML tables successfully acquired and loaded
>
>Security Framework initialized
>Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
>Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
>Disabled fast string operations
>mce: CPU supports 5 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
>Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
>Freeing SMP alternatives memory: 44K (c1ff1000 - c1ffc000)
>ftrace: allocating 39426 entries in 78 pages
>smpboot: Max logical packages: 1
>smpboot: APIC(0) Converting physical 0 to logical package 0
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>smpboot: CPU0: Intel(R) Celeron(R) M processor         1.00GHz (family: 0x6, model: 0xd, stepping: 0x8)
>Performance Events: p6 PMU driver.
>... version:                0
>... bit width:              32
>... generic registers:      2
>... value mask:             00000000ffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   0
>... event mask:             0000000000000003
>x86: Booted up 1 node, 1 CPUs
>smpboot: Total of 1 processors activated (1995.02 BogoMIPS)
>devtmpfs: initialized
>PM: Registering ACPI NVS region [mem 0x5f6e0000-0x5f6e2fff] (12288 bytes)
>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>xor: measuring software checksum speed
>   pIII_sse  :  2828.000 MB/sec
>   prefetch64-sse:  3124.000 MB/sec
>xor: using function: prefetch64-sse (3124.000 MB/sec)
>pinctrl core: initialized pinctrl subsystem
>NET: Registered protocol family 16
>cpuidle: using governor menu
>Simple Boot Flag at 0x34 set to 0x80
>ACPI: bus type PCI registered
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>raid6: mmxx1    gen()  1046 MB/s
>raid6: mmxx2    gen()  1207 MB/s
>raid6: sse1x1   gen()   777 MB/s
>raid6: sse1x2   gen()  1238 MB/s
>raid6: sse2x1   gen()  1371 MB/s
>raid6: sse2x1   xor()   894 MB/s
>raid6: sse2x2   gen()  1503 MB/s
>raid6: sse2x2   xor()   927 MB/s
>raid6: using algorithm sse2x2 gen() 1503 MB/s
>raid6: .... xor() 927 MB/s, rmw enabled
>raid6: using intx1 recovery algorithm
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
>pci_bus 0000:00: root bus resource [mem 0x5f700000-0xfebfffff window]
>pci_bus 0000:00: root bus resource [bus 00-ff]
>pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
>pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
>pci 0000:00:02.0: reg 0x10: [mem 0xfdf00000-0xfdf7ffff]
>pci 0000:00:02.0: reg 0x14: [io  0xff00-0xff07]
>pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:00:02.0: reg 0x1c: [mem 0xfdf80000-0xfdfbffff]
>pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
>pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x0007ffff]
>pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
>pci 0000:00:1d.0: reg 0x20: [io  0xfe00-0xfe1f]
>pci 0000:00:1d.0: System wakeup disabled by ACPI
>pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
>pci 0000:00:1d.1: reg 0x20: [io  0xfd00-0xfd1f]
>pci 0000:00:1d.1: System wakeup disabled by ACPI
>pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
>pci 0000:00:1d.2: reg 0x20: [io  0xfc00-0xfc1f]
>pci 0000:00:1d.2: System wakeup disabled by ACPI
>pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
>pci 0000:00:1d.3: reg 0x20: [io  0xfb00-0xfb1f]
>pci 0000:00:1d.3: System wakeup disabled by ACPI
>pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
>pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: System wakeup disabled by ACPI
>pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>pci 0000:00:1e.0: System wakeup disabled by ACPI
>pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
>pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0800-087f
>pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 02c0-02cf
>pci 0000:00:1f.2: [8086:2653] type 00 class 0x01018a
>pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
>pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
>pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
>pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
>pci 0000:00:1f.2: reg 0x20: [io  0xfa00-0xfa0f]
>pci 0000:00:1f.2: reg 0x24: [mem 0xfdffe000-0xfdffe3ff]
>pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
>pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
>pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
>pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
>pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
>pci 0000:01:08.0: [8086:1064] type 00 class 0x020000
>pci 0000:01:08.0: reg 0x10: [mem 0xfddff000-0xfddfffff]
>pci 0000:01:08.0: reg 0x14: [io  0xef00-0xef3f]
>pci 0000:01:08.0: supports D1 D2
>pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x5f700000-0xfebfffff window] (subtractive decode)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: Enabled 1 GPEs in block 00 to 1F
>vgaarb: setting as boot device: PCI:0000:00:02.0
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ACPI: bus type USB registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>pps_core: LinuxPPS API ver. 1 registered
>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>PTP clock support registered
>Advanced Linux Sound Architecture Driver Initialized.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
>e820: reserve RAM buffer [mem 0x5f6e0000-0x5fffffff]
>Bluetooth: Core ver 2.21
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO socket layer initialized
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>clocksource: Switched to clocksource hpet
>pnp: PnP ACPI init
>system 00:00: [io  0x04d0-0x04d1] has been reserved
>system 00:00: [io  0x0800-0x085f] has been reserved
>system 00:00: [io  0x0880-0x088f] has been reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>system 00:09: [io  0x0400-0x04bf] could not be reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
>system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
>system 00:0b: [mem 0x5f6e0000-0x5f6fffff] could not be reserved
>system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0b: [mem 0x00100000-0x5f6dffff] could not be reserved
>system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0b: [mem 0xfed13000-0xfed1dfff] has been reserved
>system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
>system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
>system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 12 devices
>clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>pci 0000:00:02.1: BAR 0: assigned [mem 0x5f700000-0x5f77ffff]
>pci 0000:00:1e.0: PCI bridge to [bus 01]
>pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
>pci_bus 0000:00: resource 8 [mem 0x5f700000-0xfebfffff window]
>pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
>pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
>pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
>pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
>pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
>pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff window]
>pci_bus 0000:01: resource 8 [mem 0x5f700000-0xfebfffff window]
>NET: Registered protocol family 2
>TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
>PCI: CLS 64 bytes, default 64
>Scanning for low memory corruption every 60 seconds
>futex hash table entries: 256 (order: 2, 16384 bytes)
>workingset: timestamp_bits=10 max_order=19 bucket_order=9
>NFS: Registering the id_resolver key type
>Key type id_resolver registered
>Key type id_legacy registered
>async_tx: api initialized (async)
>bounce: pool size: 64 pages
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>intel_idle: does not run on family 6 model 13
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
>00:05: ttyS2 at I/O 0x3e8 (irq = 5, base_baud = 115200) is a 16550A
>00:06: ttyS3 at I/O 0x2e8 (irq = 6, base_baud = 115200) is a 16550A
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>[drm:drm_pci_init]
>[drm:drm_get_pci_dev]
>[drm:drm_minor_register]
>[drm:drm_minor_register] new minor registered 64
>[drm:drm_minor_register]
>[drm:drm_minor_register] new minor registered 128
>[drm:drm_minor_register]
>[drm:drm_minor_register] new minor registered 0
>[drm:i915_dump_device_info] i915 device info: gen=3, pciid=0x2592 rev=0x04 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
>[drm:intel_detect_pch] No PCH found.
>pci 0000:00:00.0: Intel 915GM Chipset
>pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
>pci 0000:00:00.0: detected 8192K stolen memory
>[drm:i915_stolen_to_physical] GTT within stolen memory at 0x5ffc0000-0x5fffffff
>[drm:i915_stolen_to_physical] Stolen memory adjusted to 0x5f800000-0x5ffbffff
>[drm:i915_gem_init_stolen] Memory reserved for graphics device: 7936K, usable: 7936K
>[drm] Memory usable by graphics device = 256M
>[drm:i915_gem_gtt_init] GMADR size = 256M
>[drm:i915_gem_gtt_init] GTT stolen size = 7M
>[drm:i915_gem_gtt_init] ppgtt mode: 0
>[drm] Replacing VGA console driver
>Console: switching to colour dummy device 80x25
>[drm:intel_opregion_setup] graphic opregion physical addr: 0x0
>[drm:intel_opregion_setup] ACPI OpRegion not supported!
>[drm:i915_driver_load] can't enable MSI
>[drm:intel_device_info_runtime_init] slice total: 0
>[drm:intel_device_info_runtime_init] subslice total: 0
>[drm:intel_device_info_runtime_init] subslice per slice: 0
>[drm:intel_device_info_runtime_init] EU total: 0
>[drm:intel_device_info_runtime_init] EU per subslice: 0
>[drm:intel_device_info_runtime_init] has slice power gating: n
>[drm:intel_device_info_runtime_init] has subslice power gating: n
>[drm:intel_device_info_runtime_init] has EU power gating: n
>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[drm] Driver supports precise vblank timestamp query.
>[drm:init_vbt_defaults] Set default to SSC at 100000 kHz
>[drm] failed to find VBIOS tables
>[drm:intel_power_well_enable] enabling always-on
>[drm:drm_irq_install] irq=16
>[drm:intel_modeset_init] 2 display pipes available.
>[drm:intel_crtc_init] swapping pipes & planes for FBC
>[drm:intel_modeset_init] pipe A sprite A init failed: -19
>[drm:intel_crtc_init] swapping pipes & planes for FBC
>[drm:intel_modeset_init] pipe B sprite B init failed: -19
>[drm:intel_update_cdclk] Current CD clock rate: 190000 kHz
>[drm:intel_update_max_cdclk] Max CD clock rate: 190000 kHz
>[drm:intel_update_max_cdclk] Max dotclock rate: 342000 kHz
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 226
>Raw EDID:
>        aa 55 03 6f 01 05 0a 90 80 70 60 50 40 30 20 10
>        00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 226
>Raw EDID:
>        aa 55 03 6f 01 05 0a 90 80 70 60 50 40 30 20 10
>        00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 226
>Raw EDID:
>        aa 55 03 6f 01 05 0a 90 80 70 60 50 40 30 20 10
>        00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 226
>Raw EDID:
>        aa 55 03 6f 01 05 0a 90 80 70 60 50 40 30 20 10
>        00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>        ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>i915 0000:00:02.0: LVDS-1: Ignoring invalid EDID block 1.
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0030 w(1)
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0030 w(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[drm:intel_lvds_init] using current (BIOS) mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1x1" 0 65143 1 1 1 1 1 1 1 1 0x0 0x0
>[drm:intel_lvds_init] detected single-link lvds configuration
>[drm:drm_sysfs_connector_add] adding "LVDS-1" to sysfs
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:get_backlight_max_vbt] default backlight frequency 200 Hz
>[drm:intel_panel_setup_backlight] Connector LVDS-1 backlight initialized, disabled, brightness 0/14843
>[drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:drm_sysfs_connector_add] adding "SVIDEO-1" to sysfs
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: enabled
>[drm:intel_modeset_readout_hw_state] [ENCODER:30:LVDS-30] hw state readout: enabled, pipe B
>[drm:intel_modeset_readout_hw_state] [ENCODER:33:DAC-33] hw state readout: disabled, pipe A
>[drm:intel_modeset_readout_hw_state] [ENCODER:35:TV-35] hw state readout: disabled, pipe A
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:29:LVDS-1] hw state readout: enabled
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:32:VGA-1] hw state readout: disabled
>[drm:intel_modeset_readout_hw_state] [CONNECTOR:34:SVIDEO-1] hw state readout: disabled
>[drm:drm_calc_timestamping_constants] crtc 28: hwmode: htotal 1344, vtotal 806, vdisplay 768
>[drm:drm_calc_timestamping_constants] crtc 28: clock 65143 kHz framedur 16629016 linedur 20631
>[drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config f48b4c00 for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: A
>[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>tsc: Refined TSC clocksource calibration: 997.499 MHz
>clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc1b8ea335, max_idle_ns: 881590512489 ns
>[drm:intel_dump_pipe_config] port clock: 0
>[drm:intel_dump_pipe_config] pipe src size: 0x0
>[drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[drm:intel_dump_pipe_config] planes on this crtc
>[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config f48b5000 for pipe B
>[drm:intel_dump_pipe_config] cpu_transcoder: B
>[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65143 1024 1234 1260 1344 768 769 773 806 0x40 0xa
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65143 1024 1234 1260 1344 768 769 773 806 0x40 0xa
>[drm:intel_dump_crtc_timings] crtc timings: 65143 1024 1234 1260 1344 768 769 773 806, type: 0x40 flags: 0xa
>[drm:intel_dump_pipe_config] port clock: 65143
>[drm:intel_dump_pipe_config] pipe src size: 1024x768
>[drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x80000668, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x98040000, dpll_md: 0x0, fp0: 0x21307, fp1: 0x31108
>[drm:intel_dump_pipe_config] planes on this crtc
>[drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.0 idx: 2 disabled, scaler_id = 0
>[drm:intel_dump_pipe_config] CURSOR PLANE:27 plane: 1.2 idx: 3 disabled, scaler_id = 0
>[drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, ffff000]
>[drm:i915_gem_context_init] fake context support initialized
>[drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[drm:i915_pages_create_for_stolen] offset=0x0, size=131072
>[drm] RC6 disabled, disabling runtime PM support
>[drm:intel_update_cdclk] Current CD clock rate: 190000 kHz
>[drm] initialized overlay support
>[drm:intel_backlight_device_register] Connector LVDS-1 backlight sysfs interface registered
>[drm:intel_fbdev_init_bios] pipe A not active or no fb, skipping
>[drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[drm:intel_fbdev_init_bios] no active fbs found, not using BIOS config
>[drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:LVDS-1]
>[drm:intel_lvds_detect] [CONNECTOR:29:LVDS-1]
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:LVDS-1] status updated from unknown to connected
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:29:LVDS-1] probed modes :
>[drm:drm_mode_debug_printmodeline] Modeline 50:"1x1" 65143000 65143 1 1 1 1 1 1 1 1 0x8 0x0
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:VGA-1]
>[drm:intel_crt_detect] [CONNECTOR:32:VGA-1] force=1
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:intel_get_load_detect_pipe] [CONNECTOR:32:VGA-1], [ENCODER:33:DAC-33]
>[drm:intel_get_load_detect_pipe] creating tmp fb for load-detection
>[drm:drm_framebuffer_reference] f48b3480: FB ID: 51 (1)
>[drm:drm_framebuffer_unreference] f48b3480: FB ID: 51 (2)
>[drm:connected_sink_compute_bpp] [CONNECTOR:32:VGA-1] checking for sink bpp constrains
>[drm:intel_modeset_pipe_config] hw max bpp: 24, pipe bpp: 24, dithering: 0
>[drm:intel_dump_pipe_config] [CRTC:25][modeset] config f48fac00 for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: A
>[drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>brd: module loaded
>[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
>[drm:intel_dump_crtc_timings] crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
>[drm:intel_dump_pipe_config] port clock: 31500
>[drm:intel_dump_pipe_config] pipe src size: 640x480
>[drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>loop: module loaded
>isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
>mpt3sas version 12.100.00.00 loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
>scsi host0: ahci
>scsi host1: ahci
>[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>scsi host2: ahci
>[drm:intel_dump_pipe_config] planes on this crtc
>[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>scsi host3: ahci
>ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 19
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 19
>ata4: DUMMY
>e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>[drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[drm:drm_calc_timestamping_constants] crtc 25: hwmode: htotal 832, vtotal 520, vdisplay 480
>[drm:drm_calc_timestamping_constants] crtc 25: clock 31500 kHz framedur 13734603 linedur 26412
>[drm:i9xx_get_fifo_size] FIFO size - (0x00002020) A: 32
>[drm:i9xx_get_fifo_size] FIFO size - (0x00002020) B: 32
>[drm:intel_calculate_wm] FIFO entries required for mode: 10
>[drm:intel_calculate_wm] FIFO watermark level: 20
>[drm:i9xx_update_wm] FIFO watermarks - A: 30, B: 20
>[drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[drm:i9xx_update_wm] Setting FIFO watermarks - A: 30, B: 20, C: 2, SR 1
>[drm:intel_enable_pipe] enabling pipe A
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>e100 0000:01:08.0 eth0: addr 0xfddff000, irq 20, MAC addr 00:14:5e:12:40:b1
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:intel_connector_check_state] [CONNECTOR:32:VGA-1]
>[drm:check_encoder_state] [ENCODER:30:LVDS-30]
>[drm:check_encoder_state] [ENCODER:33:DAC-33]
>[drm:check_encoder_state] [ENCODER:35:TV-35]
>[drm:check_crtc_state] [CRTC:25]
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[drm:intel_crt_load_detect] starting load-detect on CRT
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:intel_release_load_detect_pipe] [CONNECTOR:32:VGA-1], [ENCODER:33:DAC-33]
>[drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:intel_disable_pipe] disabling pipe A
>[drm:i9xx_get_fifo_size] FIFO size - (0x00002020) A: 32
>[drm:i9xx_get_fifo_size] FIFO size - (0x00002020) B: 32
>[drm:i9xx_update_wm] FIFO watermarks - A: 30, B: 30
>[drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[drm:i9xx_update_wm] Setting FIFO watermarks - A: 30, B: 30, C: 2, SR 1
>[drm:intel_connector_check_state] [CONNECTOR:32:VGA-1]
>[drm:check_encoder_state] [ENCODER:30:LVDS-30]
>[drm:check_encoder_state] [ENCODER:33:DAC-33]
>[drm:check_encoder_state] [ENCODER:35:TV-35]
>[drm:drm_property_unreference_blob] f5632900: blob ID: 52 (1)
>[drm:check_crtc_state] [CRTC:25]
>[drm:drm_framebuffer_unreference] f48b3480: FB ID: 51 (1)
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:VGA-1] status updated from unknown to disconnected
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:VGA-1] disconnected
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:SVIDEO-1]
>[drm:intel_tv_detect] [CONNECTOR:34:SVIDEO-1] force=1
>[drm:intel_get_load_detect_pipe] [CONNECTOR:34:SVIDEO-1], [ENCODER:35:TV-35]
>[drm:intel_get_load_detect_pipe] creating tmp fb for load-detection
>[drm:drm_framebuffer_reference] f494aa80: FB ID: 51 (1)
>[drm:drm_framebuffer_unreference] f494aa80: FB ID: 51 (2)
>[drm:connected_sink_compute_bpp] [CONNECTOR:34:SVIDEO-1] checking for sink bpp constrains
>[drm:intel_tv_compute_config] forcing bpc to 8 for TV
>[drm:intel_modeset_pipe_config] hw max bpp: 24, pipe bpp: 24, dithering: 0
>[drm:intel_dump_pipe_config] [CRTC:25][modeset] config f49e1800 for pipe A
>[drm:intel_dump_pipe_config] cpu_transcoder: A
>[drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[drm:intel_dump_pipe_config] requested mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>[drm:intel_dump_pipe_config] adjusted mode:
>[drm:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>[drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
>[drm:intel_dump_pipe_config] port clock: 108000
>[drm:intel_dump_pipe_config] pipe src size: 1280x1024
>[drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[drm:intel_dump_pipe_config] ips: 0
>[drm:intel_dump_pipe_config] double wide: 0
>[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[drm:intel_dump_pipe_config] planes on this crtc
>[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 0.1 idx: 1 disabled, scaler_id = 0
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata1.00: ATA-8: WD1602ABYS-23B7A0    39M4507 42C0462IBM, 02.03B05, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>[drm:drm_calc_timestamping_constants] crtc 25: hwmode: htotal 1712, vtotal 1104, vdisplay 1024
>[drm:drm_calc_timestamping_constants] crtc 25: clock 108000 kHz framedur 17500444 linedur 15851
>[drm:i9xx_get_fifo_size] FIFO size - (0x00002020) A: 32
>[drm:i9xx_get_fifo_size] FIFO size - (0x00002020) B: 32
>[drm:intel_calculate_wm] FIFO entries required for mode: 34
>[drm:intel_calculate_wm] FIFO watermark level: -4
>[drm:i9xx_update_wm] FIFO watermarks - A: 30, B: 8
>[drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[drm:i9xx_update_wm] Setting FIFO watermarks - A: 30, B: 8, C: 2, SR 1
>[drm:intel_enable_pipe] enabling pipe A
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>clocksource: Switched to clocksource tsc
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:intel_connector_check_state] [CONNECTOR:34:SVIDEO-1]
>[drm:check_encoder_state] [ENCODER:30:LVDS-30]
>[drm:check_encoder_state] [ENCODER:33:DAC-33]
>[drm:check_encoder_state] [ENCODER:35:TV-35]
>[drm:check_crtc_state] [CRTC:25]
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:intel_tv_detect_type] TV detected: c0c37, 7f0000aa
>[drm:intel_tv_detect_type] Unrecognised TV connection
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:intel_release_load_detect_pipe] [CONNECTOR:34:SVIDEO-1], [ENCODER:35:TV-35]
>[drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
>[drm:vblank_disable_fn] disabling vblank on crtc 0
>[drm:intel_disable_pipe] disabling pipe A
>[drm:i9xx_get_fifo_size] FIFO size - (0x00002020) A: 32
>[drm:i9xx_get_fifo_size] FIFO size - (0x00002020) B: 32
>[drm:i9xx_update_wm] FIFO watermarks - A: 30, B: 30
>[drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[drm:i9xx_update_wm] Setting FIFO watermarks - A: 30, B: 30, C: 2, SR 1
>[drm:intel_connector_check_state] [CONNECTOR:34:SVIDEO-1]
>[drm:check_encoder_state] [ENCODER:30:LVDS-30]
>[drm:check_encoder_state] [ENCODER:33:DAC-33]
>[drm:check_encoder_state] [ENCODER:35:TV-35]
>[drm:drm_property_unreference_blob] f487ce80: blob ID: 52 (1)
>[drm:check_crtc_state] [CRTC:25]
>[drm:drm_framebuffer_unreference] f494aa80: FB ID: 51 (1)
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:SVIDEO-1] status updated from unknown to disconnected
>[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:SVIDEO-1] disconnected
>[drm:drm_setup_crtcs]
>[drm:drm_enable_connectors] connector 29 enabled? yes
>[drm:drm_enable_connectors] connector 32 enabled? no
>[drm:drm_enable_connectors] connector 34 enabled? no
>[drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
>[drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0
>[drm:intel_fb_initial_config] connector LVDS-1 on pipe B [CRTC:28]: 1x1
>[drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[drm:intel_fb_initial_config] connector SVIDEO-1 not enabled, skipping
>[drm:drm_setup_crtcs] desired mode 1x1 set on crtc 28 (0,0)
>[drm:intelfb_create] no BIOS fb, allocating a new one
>[drm:i915_gem_object_create_stolen] creating stolen object: size=1000
>[drm:i915_pages_create_for_stolen] offset=0x20000, size=4096
>[drm:intelfb_create] allocated 1x1 fb: 0x00021000, bo f48aa280

Actions: View

Attachments on bug 96692: 124735 | 124736 | 124737

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.