Attachment 124764 Details for Bug 96711 – Xorg.0.log copied after issue observed.

Xorg.0.log copied after issue observed.

Xorg.0.log (text/x-log), 32.65 KB, created by Roc Vallès Domènech on 2016-06-28 18:51:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Roc Vallès Domènech

Created: 2016-06-28 18:51:19 UTC

Size: 32.65 KB

patch

obsolete

>[    83.359] (--) Log file renamed from "/var/log/Xorg.pid-633.log" to "/var/log/Xorg.0.log"
>[    83.398] 
>X.Org X Server 1.18.3
>Release Date: 2016-04-04
>[    83.398] X Protocol Version 11, Revision 0
>[    83.398] Build Operating System: Linux 4.5.1-1-ARCH i686 
>[    83.398] Current Operating System: Linux yuuko.rvalles.net 4.6.3-1-ARCH #1 SMP PREEMPT Fri Jun 24 21:37:08 CEST 2016 i686
>[    83.398] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda2:yuuko root=/dev/mapper/yuuko-arch resume=/dev/mapper/yuuko-swap rw viafb.viafb_active_dev=LCD viafb.viafb_mode=1024x768 zswap.enabled=1 zswap.compressor=lzo resume=UUID=5507b601-3b06-469a-8834-57e12c866eef quiet
>[    83.399] Build Date: 03 June 2016  07:30:07AM
>[    83.399]  
>[    83.399] Current version of pixman: 0.34.0
>[    83.399] 	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>[    83.399] Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>[    83.399] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 27 20:23:22 2016
>[    83.540] (==) Using config directory: "/etc/X11/xorg.conf.d"
>[    83.540] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
>[    83.597] (==) No Layout section.  Using the first Screen section.
>[    83.597] (==) No screen section available. Using defaults.
>[    83.597] (**) |-->Screen "Default Screen Section" (0)
>[    83.597] (**) |   |-->Monitor "<default monitor>"
>[    83.623] (==) No device specified for screen "Default Screen Section".
>	Using the first device section listed.
>[    83.623] (**) |   |-->Device "openchrome"
>[    83.623] (==) No monitor specified for screen "Default Screen Section".
>	Using a default monitor configuration.
>[    83.623] (==) Automatically adding devices
>[    83.623] (==) Automatically enabling devices
>[    83.623] (==) Automatically adding GPU devices
>[    83.623] (==) Max clients allowed: 256, resource mask: 0x1fffff
>[    83.732] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
>[    83.732] 	Entry deleted from font path.
>[    83.732] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
>[    83.733] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
>[    83.733] 	Entry deleted from font path.
>[    83.733] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
>[    83.733] (==) FontPath set to:
>	/usr/share/fonts/misc/,
>	/usr/share/fonts/TTF/,
>	/usr/share/fonts/OTF/,
>	/usr/share/fonts/Type1/
>[    83.733] (==) ModulePath set to "/usr/lib/xorg/modules"
>[    83.733] (II) The server relies on udev to provide the list of input devices.
>	If no devices become available, reconfigure udev or disable AutoAddDevices.
>[    83.749] (II) Loader magic: 0x82a96a0
>[    83.749] (II) Module ABI versions:
>[    83.749] 	X.Org ANSI C Emulation: 0.4
>[    83.749] 	X.Org Video Driver: 20.0
>[    83.749] 	X.Org XInput driver : 22.1
>[    83.749] 	X.Org Server Extension : 9.0
>[    83.752] (++) using VT number 1
>
>[    83.752] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
>[    83.755] (--) PCI:*(0:1:0:0) 1106:3108:1071:8889 rev 1, Mem @ 0xa4000000/67108864, 0xe1000000/16777216, BIOS @ 0x????????/131072
>[    83.755] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
>[    83.756] (II) LoadModule: "glx"
>[    83.806] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>[    84.247] (II) Module glx: vendor="X.Org Foundation"
>[    84.248] 	compiled for 1.18.3, module version = 1.0.0
>[    84.248] 	ABI class: X.Org Server Extension, version 9.0
>[    84.248] (==) AIGLX enabled
>[    84.248] (II) LoadModule: "openchrome"
>[    84.865] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
>[    84.918] (II) Module openchrome: vendor="http://www.freedesktop.org/wiki/Openchrome/"
>[    84.918] 	compiled for 1.18.3, module version = 0.4.902
>[    84.918] 	Module class: X.Org Video Driver
>[    84.918] 	ABI class: X.Org Video Driver, version 20.0
>[    84.918] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
>	KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800,
>	PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700,
>	CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890,
>	P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900
>[    84.919] (!!) VIA Technologies does not support this driver in any way.
>[    84.919] (!!) For support, please refer to http://www.freedesktop.org/wiki/Openchrome/.
>[    84.919] (!!) (development build, branch makepkg at revision 54de6f9)
>[    84.919] (II) CHROME(0): viaPreInit
>[    84.919] (II) CHROME(0): VIAGetRec
>[    84.919] (--) CHROME(0): Chipset: K8M800 / K8N800
>[    84.919] (--) CHROME(0): Chipset revision: 0
>[    85.083] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
>[    85.083] (II) Loading sub module "vgahw"
>[    85.083] (II) LoadModule: "vgahw"
>[    85.083] (II) Loading /usr/lib/xorg/modules/libvgahw.so
>[    85.103] (II) Module vgahw: vendor="X.Org Foundation"
>[    85.103] 	compiled for 1.18.3, module version = 0.1.0
>[    85.103] 	ABI class: X.Org Video Driver, version 20.0
>[    85.103] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB
>[    85.103] (II) CHROME(0): Entered viaMapMMIO.
>[    85.103] (--) CHROME(0): Mapping MMIO at address 0xE1000000 with size 52 KB.
>[    85.103] (--) CHROME(0): Mapping 2D Host BitBLT space at address 0xE1200000 with size 2048 KB.
>[    85.103] (--) CHROME(0): Mapping the frame buffer at address 0xA4000000 with size 65536 KB.
>[    85.104] (--) CHROME(0): Frame buffer start address: 0xb27c9000, free start: 0x0 end: 0x4000000
>[    85.104] (II) CHROME(0): Entered viaMMIOEnable.
>[    85.104] (II) CHROME(0): Exiting viaMMIOEnable.
>[    85.104] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
>[    85.104] (II) CHROME(0): Exiting viaMapMMIO.
>[    85.104] (II) CHROME(0): Creating default Display subsection in Screen section
>	"Default Screen Section" for depth/fbbpp 24/32
>[    85.104] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
>[    85.104] (==) CHROME(0): RGB weight 888
>[    85.104] (==) CHROME(0): Default visual is TrueColor
>[    85.104] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
>[    85.104] (**) CHROME(0): Option "SWCursor" "true"
>[    85.104] (**) CHROME(0): Option "NoXVDMA" "true"
>[    85.104] (==) CHROME(0): Shadow framebuffer is disabled.
>[    85.104] (==) CHROME(0): Hardware acceleration is enabled.
>[    85.104] (==) CHROME(0): Using EXA acceleration architecture.
>[    85.104] (==) CHROME(0): EXA composite acceleration enabled.
>[    85.104] (==) CHROME(0): EXA scratch area size is 4096 kB.
>[    85.104] (**) CHROME(0): Using software cursors.
>[    85.104] (==) CHROME(0): GPU virtual command queue will be enabled.
>[    85.104] (==) CHROME(0): DRI IRQ will be disabled if DRI is enabled.
>[    85.104] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
>[    85.104] (==) CHROME(0): AGP DMA will be used for 2D acceleration.
>[    85.105] (**) CHROME(0): PCI DMA will not be used for XV image transfer if DRI is enabled.
>[    85.105] (==) CHROME(0): Xv Bandwidth check is enabled.
>[    85.105] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
>[    85.105] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
>[    85.105] (==) CHROME(0): TV dotCrawl is disabled.
>[    85.105] (==) CHROME(0): TV deflicker is set to 0.
>[    85.105] (==) CHROME(0): No default TV type is set.
>[    85.105] (==) CHROME(0): No default TV output signal type is set.
>[    85.105] (==) CHROME(0): No default TV output port is set.
>[    85.105] (==) CHROME(0): Will not print VGA registers.
>[    85.105] (==) CHROME(0): Will not scan I2C buses.
>[    85.105] (II) CHROME(0): Detected MemClk 5
>[    85.105] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 5
>[    85.105] (II) CHROME(0): Detected TV standard: PAL.
>[    85.105] (II) Loading sub module "i2c"
>[    85.105] (II) LoadModule: "i2c"
>[    85.105] (II) Module "i2c" already built-in
>[    85.105] (II) CHROME(0): Entered ViaI2CInit.
>[    85.105] (II) CHROME(0): Entered ViaI2CBus1Init.
>[    85.105] (II) CHROME(0): I2C bus "I2C Bus 1" initialized.
>[    85.105] (II) CHROME(0): Exiting ViaI2CBus1Init.
>[    85.105] (II) CHROME(0): Entered ViaI2CBus2Init.
>[    85.105] (II) CHROME(0): I2C bus "I2C Bus 2" initialized.
>[    85.105] (II) CHROME(0): Exiting ViaI2CBus2Init.
>[    85.105] (II) CHROME(0): Entered ViaI2CBus3Init.
>[    85.105] (II) CHROME(0): I2C bus "I2C Bus 3" initialized.
>[    85.105] (II) CHROME(0): Exiting ViaI2CBus3Init.
>[    85.105] (II) CHROME(0): Exiting ViaI2CInit.
>[    85.105] (II) Loading sub module "ddc"
>[    85.105] (II) LoadModule: "ddc"
>[    85.105] (II) Module "ddc" already built-in
>[    85.105] (II) CHROME(0): Entered viaOutputDetect.
>[    85.105] (II) CHROME(0): Entered viaProbePinStrapping.
>[    85.105] (II) CHROME(0): Probing VIA Technologies IGP pin strapping . . .
>[    85.105] (II) CHROME(0): SR12: 0x10
>[    85.105] (II) CHROME(0): SR13: 0x08
>[    85.105] (II) CHROME(0): A TV encoder is detected on DVP0 (Digital Video Port 0).
>[    85.105] (II) CHROME(0): 24-bit FPDP (Flat Panel Display Port) detected.
>[    85.105] (II) CHROME(0): Detected Flat Panel Type from Strapping Pins: 0
>[    85.105] (II) CHROME(0): Exiting viaProbePinStrapping.
>[    85.106] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
>[    85.106] (II) CHROME(0): Output LVDS-1 has no monitor section
>[    85.106] (II) CHROME(0): Entered via_analog_init.
>[    85.106] (II) CHROME(0): Output VGA-1 has no monitor section
>[    85.106] (II) CHROME(0): Exiting via_analog_init.
>[    85.106] (II) CHROME(0): Entered via_tv_init.
>[    85.106] (II) CHROME(0): ViaVT162xDetect
>[    85.106] (II) CHROME(0): I2C device "I2C Bus 3:VT162x" registered at address 0x40.
>[    85.108] (--) CHROME(0): Detected VIA Technologies VT1622A/VT1623 TV Encoder
>[    85.108] (II) CHROME(0): ViaVT162xInit
>[    85.108] (II) CHROME(0): Output TV-1 has no monitor section
>[    85.108] (II) CHROME(0): VT162xSave
>[    85.244] (II) CHROME(0): Exiting via_tv_init.
>[    85.244] (II) CHROME(0): Entered via_dvi_init.
>[    85.244] (--) CHROME(0): Did not find a possible external TMDS transmitter on I2C Bus 2 or I2C Bus 3.
>[    85.244] (II) CHROME(0): Exiting via_dvi_init.
>[    85.244] (II) CHROME(0): Exiting viaOutputDetect.
>[    85.244] (II) CHROME(0): Entered via_lvds_detect.
>[    85.244] (II) CHROME(0): Entered VIAGetPanelSizeFromDDCv1.
>[    85.244] (--) CHROME(0): I2C device on I2C Bus 2 does not support EDID.
>[    85.244] (II) CHROME(0): Exiting VIAGetPanelSizeFromDDCv1.
>[    85.244] (II) CHROME(0): ViaPanelGetNativeModeFromScratchPad
>[    85.244] (II) CHROME(0): Native Panel Resolution is 1024x768
>[    85.244] (--) CHROME(0): Detected Flat Panel Screen Resolution: 1024x768
>[    85.244] (II) CHROME(0): Exiting via_lvds_detect.
>[    85.244] (II) CHROME(0): Entered via_lvds_get_modes.
>[    85.244] (II) CHROME(0): Exiting via_lvds_get_modes.
>[    85.245] (II) CHROME(0): Printing probed modes for output LVDS-1
>[    85.245] (II) CHROME(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz eP)
>[    85.245] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
>[    85.245] (II) CHROME(0): I2C device "I2C Bus 1:ddc2" registered at address 0xA0.
>[    85.251] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
>[    85.251] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
>[    85.251] (II) CHROME(0): I2C device "I2C Bus 2:ddc2" registered at address 0xA0.
>[    85.254] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
>[    85.254] (--) CHROME(0): Now perform manual detection of a VGA monitor.
>[    85.254] (II) CHROME(0): EDID for output VGA-1
>[    85.254] (II) CHROME(0): VT1622DACSense
>[    85.260] (--) CHROME(0): VT162x: Nothing connected.
>[    85.260] (II) CHROME(0): EDID for output TV-1
>[    85.260] (II) CHROME(0): Output LVDS-1 connected
>[    85.260] (II) CHROME(0): Output VGA-1 disconnected
>[    85.260] (II) CHROME(0): Output TV-1 disconnected
>[    85.260] (II) CHROME(0): Using exact sizes for initial modes
>[    85.260] (II) CHROME(0): Output LVDS-1 using initial mode 1024x768 +0+0
>[    85.260] (II) CHROME(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
>[    85.260] (==) CHROME(0): DPI set to (96, 96)
>[    85.260] (II) Loading sub module "fb"
>[    85.260] (II) LoadModule: "fb"
>[    85.260] (II) Loading /usr/lib/xorg/modules/libfb.so
>[    85.281] (II) Module fb: vendor="X.Org Foundation"
>[    85.282] 	compiled for 1.18.3, module version = 1.0.0
>[    85.282] 	ABI class: X.Org ANSI C Emulation, version 0.4
>[    85.282] (II) Loading sub module "exa"
>[    85.282] (II) LoadModule: "exa"
>[    85.282] (II) Loading /usr/lib/xorg/modules/libexa.so
>[    85.285] (II) Module exa: vendor="X.Org Foundation"
>[    85.285] 	compiled for 1.18.3, module version = 2.6.0
>[    85.285] 	ABI class: X.Org Video Driver, version 20.0
>[    85.285] (--) Depth 24 pixmap format is 32 bpp
>[    85.286] (II) CHROME(0): VIAScreenInit
>[    85.286] (II) CHROME(0): Frame Buffer From (0,0) To (1024,16384)
>[    85.286] (II) CHROME(0): Using 15616 lines for offscreen memory.
>[    85.286] 3145728 bytes of Linear memory allocated at 300000, handle 142783192
>[    85.286] (II) CHROME(0): Entered umsAccelInit.
>[    85.286] 262144 bytes of Linear memory allocated at 600000, handle 142783320
>[    85.286] (II) CHROME(0): Initializing the 2D engine.
>[    85.286] (II) CHROME(0): Initializing the 3D engine.
>[    85.286] 32 bytes of Linear memory allocated at 640000, handle 142783448
>[    85.286] 32 bytes of Linear memory allocated at 640080, handle 142783576
>[    85.286] (II) CHROME(0): Exiting umsAccelInit.
>[    85.288] (II) CHROME(0): - Visuals set up
>[    85.318] (II) CHROME(0): - B & W
>[    85.326] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
>[    85.326] (II) EXA(0): Offscreen pixmap area of 63963136 bytes
>[    85.326] (II) EXA(0): Driver registered support for the following operations:
>[    85.326] (II)         Solid
>[    85.326] (II)         Copy
>[    85.326] (II)         Composite (RENDER acceleration)
>[    85.326] (II) CHROME(0): [EXA] Enabled EXA acceleration.
>[    85.326] (==) CHROME(0): Backing store enabled
>[    85.326] (II) CHROME(0): - Backing store set up
>[    85.328] (II) CHROME(0): - SW cursor set up
>[    85.328] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>[    85.335] (II) CHROME(0): - Def Color map set up
>[    85.335] (II) CHROME(0): - Palette loaded
>[    85.335] (II) CHROME(0): - Color maps etc. set up
>[    85.335] (==) CHROME(0): DPMS enabled
>[    85.335] (II) CHROME(0): - DPMS set up
>[    85.335] (II) CHROME(0): VIAEnterVT
>[    85.335] (II) CHROME(0): Entered iga1_crtc_save.
>[    85.336] (II) CHROME(0): Entered viaIGA1Save.
>[    85.336] (II) CHROME(0): Saving sequencer registers.
>[    85.336] (II) CHROME(0): Finished saving sequencer registers.
>[    85.336] (II) CHROME(0): Saving IGA1 registers.
>[    85.336] (II) CHROME(0): Finished saving IGA1 registers.
>[    85.336] (II) CHROME(0): Exiting viaIGA1Save.
>[    85.336] (II) CHROME(0): Exiting iga1_crtc_save.
>[    85.336] (II) CHROME(0): Entered iga2_crtc_save.
>[    85.336] (II) CHROME(0): Entered viaIGA2Save.
>[    85.336] (II) CHROME(0): Saving IGA2 registers.
>[    85.336] (II) CHROME(0): Finished saving IGA2 registers.
>[    85.336] (II) CHROME(0): Exiting viaIGA2Save.
>[    85.336] (II) CHROME(0): Exiting iga2_crtc_save.
>[    85.336] (II) CHROME(0): VT162xSave
>[    85.469] (II) CHROME(0): Entered ViaLCDPower.
>[    85.470] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
>[    85.470] (II) CHROME(0): Exiting ViaLCDPower.
>[    85.470] (II) CHROME(0): Entered via_analog_dpms.
>[    85.470] (II) CHROME(0): ViaDisplayDisableCRT
>[    85.470] (II) CHROME(0): Exiting via_analog_dpms.
>[    85.470] (II) CHROME(0): ViaTVPower: Off.
>[    85.470] (II) CHROME(0): VT1622Power
>[    85.471] (II) CHROME(0): Entered iga1_crtc_dpms.
>[    85.471] (II) CHROME(0): Entered viaIGA1DPMSControl.
>[    85.471] (II) CHROME(0): Exiting viaIGA1DPMSControl.
>[    85.471] (II) CHROME(0): Exiting iga1_crtc_dpms.
>[    85.471] (II) CHROME(0): Entered iga2_crtc_dpms.
>[    85.471] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[    85.471] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[    85.471] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[    85.471] (II) CHROME(0): Entered viaIGA2ModeValid.
>[    85.471] (II) CHROME(0): Exiting viaIGA2ModeValid.
>[    85.471] (II) CHROME(0): Entered ViaLCDPower.
>[    85.472] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
>[    85.472] (II) CHROME(0): Exiting ViaLCDPower.
>[    85.472] (II) CHROME(0): Entered iga2_crtc_mode_set.
>[    85.472] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[    85.472] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[    85.472] (II) CHROME(0): Entered viaIGAInitCommon.
>[    85.472] (II) CHROME(0): SR15: 0xAE
>[    85.472] (II) CHROME(0): SR19: 0x7F
>[    85.472] (II) CHROME(0): SR1A: 0x48
>[    85.472] (II) CHROME(0): SR1B: 0xA0
>[    85.472] (II) CHROME(0): SR1E: 0x01
>[    85.472] (II) CHROME(0): SR2A: 0x0F
>[    85.472] (II) CHROME(0): SR2D: 0xEA
>[    85.472] (II) CHROME(0): SR2E: 0xFB
>[    85.472] (II) CHROME(0): SR3F: 0xFF
>[    85.472] (II) CHROME(0): SR65: 0x00
>[    85.472] (II) CHROME(0): CR36: 0x31
>[    85.472] (II) CHROME(0): CR6B: 0x04
>[    85.472] (II) CHROME(0): Exiting viaIGAInitCommon.
>[    85.472] (II) CHROME(0): Entered viaIGA2Init.
>[    85.472] (II) CHROME(0): SR1B: 0xA2
>[    85.472] (II) CHROME(0): SR2D: 0x2B
>[    85.472] (II) CHROME(0): CR6A: 0xC1
>[    85.472] (II) CHROME(0): CR6B: 0x04
>[    85.472] (II) CHROME(0): CR6C: 0x00
>[    85.472] (II) CHROME(0): CR79: 0xA0
>[    85.472] (II) CHROME(0): Exiting viaIGA2Init.
>[    85.472] (II) CHROME(0): Entered viaIGA2SetDisplayRegister.
>[    85.472] (II) CHROME(0): Requested Screen Mode: 1024x768
>[    85.472] (II) CHROME(0): IGA2 CrtcHTotal: 1328
>[    85.472] (II) CHROME(0): IGA2 CrtcHDisplay: 1024
>[    85.472] (II) CHROME(0): IGA2 CrtcHBlankStart: 1024
>[    85.472] (II) CHROME(0): IGA2 CrtcHBlankEnd: 1328
>[    85.472] (II) CHROME(0): IGA2 CrtcHSyncStart: 1072
>[    85.472] (II) CHROME(0): IGA2 CrtcHSyncEnd: 1176
>[    85.472] (II) CHROME(0): IGA2 CrtcVTotal: 798
>[    85.472] (II) CHROME(0): IGA2 CrtcVDisplay: 768
>[    85.472] (II) CHROME(0): IGA2 CrtcVBlankStart: 768
>[    85.472] (II) CHROME(0): IGA2 CrtcVBlankEnd: 798
>[    85.472] (II) CHROME(0): IGA2 CrtcVSyncStart: 771
>[    85.472] (II) CHROME(0): IGA2 CrtcVSyncEnd: 775
>[    85.472] (II) CHROME(0): Exiting viaIGA2SetDisplayRegister.
>[    85.472] (II) CHROME(0): ViaSetSecondaryFIFO
>[    85.472] (II) CHROME(0): ViaSetDotclock to 0x04704d
>[    85.472] (II) CHROME(0): ViaSetUseExternalClock
>[    85.472] (II) CHROME(0): Entered viaIGA2DisplayChannel.
>[    85.472] (II) CHROME(0): IGA2 Display Channel: On
>[    85.472] (II) CHROME(0): Exiting viaIGA2DisplayChannel.
>[    85.472] (II) CHROME(0): Entered viaIGA2SetFBStartingAddress.
>[    85.472] (II) CHROME(0): Base Address: 0x0
>[    85.472] (II) CHROME(0): DRI Base Address: 0x60000
>[    85.472] (II) CHROME(0): CR62: 0x00
>[    85.472] (II) CHROME(0): CR63: 0x00
>[    85.472] (II) CHROME(0): CR64: 0x0C
>[    85.472] (II) CHROME(0): CRA3: 0x00
>[    85.472] (II) CHROME(0): Exiting viaIGA2SetFBStartingAddress.
>[    85.472] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[    85.472] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[    85.472] (II) CHROME(0): Exiting iga2_crtc_mode_set.
>[    85.472] (II) CHROME(0): VIALoadRgbLut
>[    85.472] (II) CHROME(0): Entered ViaLCDPower.
>[    85.473] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
>[    85.473] (II) CHROME(0): Exiting ViaLCDPower.
>[    85.473] (II) CHROME(0): Entered via_analog_dpms.
>[    85.473] (II) CHROME(0): ViaDisplayDisableCRT
>[    85.473] (II) CHROME(0): Exiting via_analog_dpms.
>[    85.473] (II) CHROME(0): ViaTVPower: Off.
>[    85.473] (II) CHROME(0): VT1622Power
>[    85.474] (II) CHROME(0): Entered iga1_crtc_dpms.
>[    85.474] (II) CHROME(0): Entered viaIGA1DPMSControl.
>[    85.474] (II) CHROME(0): Exiting viaIGA1DPMSControl.
>[    85.474] (II) CHROME(0): Exiting iga1_crtc_dpms.
>[    85.474] DRM memory allocation failed -6
>[    85.474] 635904 bytes of Linear memory allocated at 641000, handle 142809560
>[    85.484] (II) CHROME(0): Benchmarking video copy.  Less time is better.
>[    85.506] (--) CHROME(0): Timed   libc YUV420 copy... 17596765. Throughput: 60.7 MiB/s.
>[    85.526] (--) CHROME(0): Timed kernel YUV420 copy... 16946942. Throughput: 63.0 MiB/s.
>[    85.547] (--) CHROME(0): Timed    SSE YUV420 copy... 16875895. Throughput: 63.3 MiB/s.
>[    85.567] (--) CHROME(0): Timed    MMX YUV420 copy... 16943113. Throughput: 63.0 MiB/s.
>[    85.587] (--) CHROME(0): Timed 3DNow! YUV420 copy... 16952463. Throughput: 63.0 MiB/s.
>[    85.608] (--) CHROME(0): Timed   MMX2 YUV420 copy... 16873546. Throughput: 63.3 MiB/s.
>[    85.608] Freed 6557696 (pool 4)
>[    85.608] (--) CHROME(0): Using MMX2 YUV42X copy for video.
>[    85.608] (WW) CHROME(0): [XvMC] Cannot use XvMC without DRI!
>[    85.608] (WW) CHROME(0): Option "AccelMethod" is not used
>[    85.608] (II) CHROME(0): - Done
>[    85.608] (--) RandR disabled
>[    85.659] (II) AIGLX: Screen 0 is not DRI2 capable
>[    85.659] (EE) AIGLX: reverting to software rendering
>[    88.589] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>[    88.592] (II) AIGLX: Loaded and initialized swrast
>[    88.592] (II) GLX: Initialized DRISWRAST GL provider for screen 0
>[    88.593] (II) CHROME(0): Setting screen physical size to 270 x 203
>[    88.593] (II) CHROME(0): Entered via_xf86crtc_resize.
>[    88.593] (II) CHROME(0): Now attempting to resize the screen . . .
>[    88.593] (II) CHROME(0): It was determined that there is no need to resize the screen.
>[    88.593] (II) CHROME(0): Exiting via_xf86crtc_resize.
>[    89.628] (II) config/udev: Adding input device Power Button (/dev/input/event4)
>[    89.628] (**) Power Button: Applying InputClass "evdev keyboard catchall"
>[    89.628] (**) Power Button: Applying InputClass "system-keyboard"
>[    89.628] (II) LoadModule: "evdev"
>[    89.628] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>[    89.699] (II) Module evdev: vendor="X.Org Foundation"
>[    89.699] 	compiled for 1.18.3, module version = 2.10.3
>[    89.699] 	Module class: X.Org XInput Driver
>[    89.699] 	ABI class: X.Org XInput driver, version 22.1
>[    89.699] (II) Using input driver 'evdev' for 'Power Button'
>[    89.699] (**) Power Button: always reports core events
>[    89.699] (**) evdev: Power Button: Device: "/dev/input/event4"
>[    89.699] (--) evdev: Power Button: Vendor 0 Product 0x1
>[    89.699] (--) evdev: Power Button: Found keys
>[    89.699] (II) evdev: Power Button: Configuring as keyboard
>[    89.699] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
>[    89.699] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
>[    89.699] (**) Option "xkb_rules" "evdev"
>[    89.699] (**) Option "xkb_layout" "es"
>[    89.807] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
>[    89.808] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
>[    89.808] (**) Video Bus: Applying InputClass "system-keyboard"
>[    89.808] (II) Using input driver 'evdev' for 'Video Bus'
>[    89.808] (**) Video Bus: always reports core events
>[    89.808] (**) evdev: Video Bus: Device: "/dev/input/event5"
>[    89.808] (--) evdev: Video Bus: Vendor 0 Product 0x6
>[    89.808] (--) evdev: Video Bus: Found keys
>[    89.808] (II) evdev: Video Bus: Configuring as keyboard
>[    89.808] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/LNXVIDEO:00/input/input9/event5"
>[    89.808] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
>[    89.808] (**) Option "xkb_rules" "evdev"
>[    89.808] (**) Option "xkb_layout" "es"
>[    89.811] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
>[    89.811] (II) No input driver specified, ignoring this device.
>[    89.811] (II) This device may have been added with another device file.
>[    89.812] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
>[    89.812] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
>[    89.812] (**) Sleep Button: Applying InputClass "system-keyboard"
>[    89.812] (II) Using input driver 'evdev' for 'Sleep Button'
>[    89.812] (**) Sleep Button: always reports core events
>[    89.812] (**) evdev: Sleep Button: Device: "/dev/input/event3"
>[    89.813] (--) evdev: Sleep Button: Vendor 0 Product 0x3
>[    89.813] (--) evdev: Sleep Button: Found keys
>[    89.813] (II) evdev: Sleep Button: Configuring as keyboard
>[    89.813] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
>[    89.813] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
>[    89.813] (**) Option "xkb_rules" "evdev"
>[    89.813] (**) Option "xkb_layout" "es"
>[    89.815] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
>[    89.816] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
>[    89.816] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
>[    89.816] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
>[    89.816] (**) AT Translated Set 2 keyboard: always reports core events
>[    89.816] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
>[    89.816] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
>[    89.816] (--) evdev: AT Translated Set 2 keyboard: Found keys
>[    89.816] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
>[    89.816] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
>[    89.816] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
>[    89.816] (**) Option "xkb_rules" "evdev"
>[    89.816] (**) Option "xkb_layout" "es"
>[    89.819] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
>[    89.819] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
>[    89.819] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
>[    89.819] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
>[    89.819] (II) LoadModule: "synaptics"
>[    89.819] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
>[    89.841] (II) Module synaptics: vendor="X.Org Foundation"
>[    89.841] 	compiled for 1.18.3, module version = 1.8.99
>[    89.841] 	Module class: X.Org XInput Driver
>[    89.841] 	ABI class: X.Org XInput driver, version 22.1
>[    89.842] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
>[    89.842] (**) SynPS/2 Synaptics TouchPad: always reports core events
>[    89.842] (**) Option "Device" "/dev/input/event6"
>[    89.860] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 85)
>[    89.860] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 94)
>[    89.860] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
>[    89.860] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
>[    89.860] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
>[    89.860] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
>[    89.860] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
>[    89.860] (**) SynPS/2 Synaptics TouchPad: always reports core events
>[    89.880] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event6"
>[    89.882] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
>[    89.882] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
>[    89.882] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
>[    89.882] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
>[    89.883] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
>[    89.883] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
>[    89.883] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
>[    89.883] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
>[    89.883] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
>[    89.884] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
>[    89.884] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
>[    89.886] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
>[    89.886] (II) No input driver specified, ignoring this device.
>[    89.886] (II) This device may have been added with another device file.
>[    89.900] (II) CHROME(0): Entered iga2_crtc_dpms.
>[    89.900] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[    89.900] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[    89.900] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[    89.900] (II) CHROME(0): Entered ViaLCDPower.
>[    89.901] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
>[    89.901] (II) CHROME(0): Exiting ViaLCDPower.
>[  1072.654] (II) CHROME(0): Entered iga2_crtc_dpms.
>[  1072.654] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[  1072.654] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[  1072.654] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[  1072.654] (II) CHROME(0): Entered ViaLCDPower.
>[  1072.655] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
>[  1072.655] (II) CHROME(0): Exiting ViaLCDPower.
>[  1072.655] (II) CHROME(0): Entered ViaLCDPower.
>[  1072.655] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
>[  1072.655] (II) CHROME(0): Exiting ViaLCDPower.
>[  1072.655] (II) CHROME(0): Entered iga2_crtc_dpms.
>[  1072.655] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[  1072.656] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[  1072.656] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[  1072.656] (II) CHROME(0): Entered ViaLCDPower.
>[  1072.656] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
>[  1072.656] (II) CHROME(0): Exiting ViaLCDPower.
>[  1072.656] (II) CHROME(0): Entered iga2_crtc_dpms.
>[  1072.656] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[  1072.656] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[  1072.656] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[  2221.932] (II) CHROME(0): Entered iga2_crtc_dpms.
>[  2221.932] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[  2221.932] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[  2221.932] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[  2221.932] (II) CHROME(0): Entered ViaLCDPower.
>[  2221.933] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
>[  2221.933] (II) CHROME(0): Exiting ViaLCDPower.
>[  2221.933] (II) CHROME(0): Entered iga2_crtc_dpms.
>[  2221.933] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[  2221.933] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[  2221.933] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[  2221.933] (II) CHROME(0): Entered ViaLCDPower.
>[  2221.934] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
>[  2221.934] (II) CHROME(0): Exiting ViaLCDPower.
>[  2821.995] (II) CHROME(0): Entered iga2_crtc_dpms.
>[  2821.995] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[  2821.995] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[  2821.995] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[  2821.995] (II) CHROME(0): Entered ViaLCDPower.
>[  2821.996] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
>[  2821.996] (II) CHROME(0): Exiting ViaLCDPower.
>[  2821.996] (II) CHROME(0): Entered ViaLCDPower.
>[  2821.996] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
>[  2821.996] (II) CHROME(0): Exiting ViaLCDPower.
>[  2821.996] (II) CHROME(0): Entered iga2_crtc_dpms.
>[  2821.996] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[  2821.996] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[  2821.996] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[  2821.996] (II) CHROME(0): Entered ViaLCDPower.
>[  2821.997] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
>[  2821.997] (II) CHROME(0): Exiting ViaLCDPower.
>[  2821.997] (II) CHROME(0): Entered iga2_crtc_dpms.
>[  2821.997] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[  2821.997] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[  2821.997] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[  2978.306] (II) CHROME(0): Entered iga2_crtc_dpms.
>[  2978.306] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[  2978.306] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[  2978.306] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[  2978.306] (II) CHROME(0): Entered ViaLCDPower.
>[  2978.307] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
>[  2978.307] (II) CHROME(0): Exiting ViaLCDPower.
>[  2978.307] (II) CHROME(0): Entered iga2_crtc_dpms.
>[  2978.307] (II) CHROME(0): Entered viaIGA2DisplayOutput.
>[  2978.307] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
>[  2978.307] (II) CHROME(0): Exiting iga2_crtc_dpms.
>[  2978.307] (II) CHROME(0): Entered ViaLCDPower.
>[  2978.308] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
>[  2978.308] (II) CHROME(0): Exiting ViaLCDPower.

Actions: View

Attachments on bug 96711: 124764 | 124847

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.