Attachment 126373 Details for Bug 97060 – dmesg kernel 4.8.0-rc4+ opregion_panel_type_quirk_2

dmesg kernel 4.8.0-rc4+ opregion_panel_type_quirk_2

kern_4.8.log (text/x-log), 113.67 KB, created by Alexey Shumitsky on 2016-09-09 12:48:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexey Shumitsky

Created: 2016-09-09 12:48:13 UTC

Size: 113.67 KB

patch

obsolete

>[    0.000000] BIOS-e820: [mem 0x0000000000094400-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ae3efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000009ae3f000-0x000000009aebefff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.6 present.
>[    0.000000] DMI: Sony Corporation VPCSE1E1E/VAIO, BIOS R2087H4 06/15/2012
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-E7FFF write-protect
>[    0.000000]   E8000-EFFFF write-combining
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 080000000 mask FE0000000 write-back
>[    0.000000]   2 base 09B000000 mask FFF000000 uncachable
>[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
>[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
>[    0.000000]   5 base 100000000 mask F00000000 write-back
>[    0.000000]   6 base 200000000 mask FC0000000 write-back
>[    0.000000]   7 base 240000000 mask FF0000000 write-back
>[    0.000000]   8 base 250000000 mask FF0000000 write-back
>[    0.000000]   9 base 25FE00000 mask FFFE00000 uncachable
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff925d800fe1b0]
>[    0.000000] Base memory trampoline at [ffff925d8008e000] 8e000 size 24576
>[    0.000000] reserving inaccessible SNB gfx pages
>[    0.000000] BRK [0x18116c000, 0x18116cfff] PGTABLE
>[    0.000000] BRK [0x18116d000, 0x18116dfff] PGTABLE
>[    0.000000] BRK [0x18116e000, 0x18116efff] PGTABLE
>[    0.000000] BRK [0x18116f000, 0x18116ffff] PGTABLE
>[    0.000000] BRK [0x181170000, 0x181170fff] PGTABLE
>[    0.000000] BRK [0x181171000, 0x181171fff] PGTABLE
>[    0.000000] BRK [0x181172000, 0x181172fff] PGTABLE
>[    0.000000] BRK [0x181173000, 0x181173fff] PGTABLE
>[    0.000000] BRK [0x181174000, 0x181174fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x33d6b000-0x35eacfff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 Sony  )
>[    0.000000] ACPI: XSDT 0x000000009AFFE120 000094 (v01 Sony   VAIO     20120615      01000013)
>[    0.000000] ACPI: FACP 0x000000009AFFC000 0000F4 (v04 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: DSDT 0x000000009AFF0000 0082C7 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: FACS 0x000000009AF6E000 000040
>[    0.000000] ACPI: FACS 0x000000009AF6E000 000040
>[    0.000000] ACPI: ASF! 0x000000009AFFD000 0000A5 (v32 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: HPET 0x000000009AFFB000 000038 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: APIC 0x000000009AFFA000 00008C (v02 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: MCFG 0x000000009AFF9000 00003C (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SLIC 0x000000009AFEF000 000176 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: WDAT 0x000000009AFEE000 000224 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFED000 000CA6 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: BOOT 0x000000009AFEB000 000028 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFE9000 00022B (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: ASPT 0x000000009AFE6000 000034 (v07 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFE5000 0007C2 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFE4000 000996 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFE2000 0011B9 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x25fdf7000-0x25fdfbfff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025fdfffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000093fff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009ae3efff]
>[    0.000000]   node   0: [mem 0x000000009afff000-0x000000009affffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025fdfffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025fdfffff]
>[    0.000000] On node 0 totalpages: 2075603
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 147 pages reserved
>[    0.000000]   DMA zone: 3987 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 9849 pages used for memmap
>[    0.000000]   DMA32 zone: 630336 pages, LIFO batch:31
>[    0.000000]   Normal zone: 22520 pages used for memmap
>[    0.000000]   Normal zone: 1441280 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00094000-0x00094fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00095000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9ae3f000-0x9aebefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
>[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 35 pages/cpu @ffff925fdfa00000 s103384 r8192 d31784 u262144
>[    0.000000] pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2043023
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-rc5+ root=UUID=ac69bfdf-b90c-42a1-b4a2-09cdb7a58f7e ro drm.debug=0xe
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 8053376K/8302412K available (6163K kernel code, 1165K rwdata, 2788K rodata, 1372K init, 928K bss, 249036K reserved, 0K cma-reserved)
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
>[    0.000000] NR_IRQS:33024 nr_irqs:488 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2394.568 MHz processor
>[    0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.13 BogoMIPS (lpj=9578272)
>[    0.000034] pid_max: default: 32768 minimum: 301
>[    0.000055] ACPI: Core revision 20160422
>[    0.007877] ACPI: 6 ACPI AML tables successfully acquired and loaded
>
>[    0.007935] Security Framework initialized
>[    0.007939] Yama: becoming mindful.
>[    0.007950] AppArmor: AppArmor initialized
>[    0.008387] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.009984] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.010702] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.010716] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.010989] CPU: Physical Processor ID: 0
>[    0.010993] CPU: Processor Core ID: 0
>[    0.011000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.011003] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.011008] mce: CPU supports 7 MCE banks
>[    0.011019] CPU0: Thermal monitoring enabled (TM1)
>[    0.011031] process: using mwait in idle threads
>[    0.011036] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>[    0.011040] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>[    0.011464] Freeing SMP alternatives memory: 24K (ffffffff8347c000 - ffffffff83482000)
>[    0.024993] ftrace: allocating 25364 entries in 100 pages
>[    0.036388] smpboot: APIC(0) Converting physical 0 to logical package 0
>[    0.036394] smpboot: Max logical packages: 4
>[    0.036470] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.036928] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.076618] TSC deadline timer enabled
>[    0.076621] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
>[    0.076630] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
>[    0.076660] core: PEBS disabled due to CPU errata, please upgrade microcode
>[    0.076665] ... version:                3
>[    0.076668] ... bit width:              48
>[    0.076671] ... generic registers:      4
>[    0.076674] ... value mask:             0000ffffffffffff
>[    0.076678] ... max period:             0000ffffffffffff
>[    0.076681] ... fixed-purpose events:   3
>[    0.076684] ... event mask:             000000070000000f
>[    0.077255] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.077366] x86: Booting SMP configuration:
>[    0.077371] .... node  #0, CPUs:      #1 #2 #3
>[    0.318749] x86: Booted up 1 node, 4 CPUs
>[    0.318758] smpboot: Total of 4 processors activated (19159.75 BogoMIPS)
>[    0.333892] devtmpfs: initialized
>[    0.333967] x86/mm: Memory block size: 128MB
>[    0.349850] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
>[    0.349944] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.365776] pinctrl core: initialized pinctrl subsystem
>[    0.381923] NET: Registered protocol family 16
>[    0.397788] cpuidle: using governor ladder
>[    0.413798] cpuidle: using governor menu
>[    0.413860] Simple Boot Flag at 0x44 set to 0x1
>[    0.413892] ACPI: bus type PCI registered
>[    0.413907] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.445960] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.445967] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.445982] PCI: Using configuration type 1 for base access
>[    0.446021] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.462011] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.511019] ACPI: Added _OSI(Module Device)
>[    0.511025] ACPI: Added _OSI(Processor Device)
>[    0.511028] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.511032] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.511233] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.514351] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.517885] ACPI: Dynamic OEM Table Load:
>[    0.517896] ACPI: SSDT 0xFFFF925FD70A6000 00067C (v01 Sony   VAIO     20120615 INTL 20100121)
>[    0.518413] ACPI: Dynamic OEM Table Load:
>[    0.518421] ACPI: SSDT 0xFFFF925FD5DD6800 000303 (v01 Sony   VAIO     20120615 INTL 20100121)
>[    0.518860] ACPI: Dynamic OEM Table Load:
>[    0.518867] ACPI: SSDT 0xFFFF925FD5C53200 000119 (v01 Sony   VAIO     20120615 INTL 20100121)
>[    0.519742] ACPI : EC: EC started
>[    1.079434] ACPI: Interpreter enabled
>[    1.079460] ACPI: (supports S0 S3 S4 S5)
>[    1.079463] ACPI: Using IOAPIC for interrupt routing
>[    1.079493] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    1.085131] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    1.085139] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    1.085182] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    1.085588] PCI host bridge to bus 0000:00
>[    1.085593] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    1.085597] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    1.085602] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    1.085608] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
>[    1.085614] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    1.085624] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
>[    1.085707] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
>[    1.085738] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    1.085770] pci 0000:00:01.0: System wakeup disabled by ACPI
>[    1.085818] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
>[    1.085827] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
>[    1.085832] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    1.085836] pci 0000:00:02.0: reg 0x20: [io  0x8000-0x803f]
>[    1.085954] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>[    1.085975] pci 0000:00:16.0: reg 0x10: [mem 0xc9404000-0xc940400f 64bit]
>[    1.086051] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    1.086129] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>[    1.086405] pci 0000:00:1a.0: reg 0x10: [mem 0xc9409000-0xc94093ff]
>[    1.088026] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    1.088074] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    1.088123] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>[    1.088141] pci 0000:00:1b.0: reg 0x10: [mem 0xc9400000-0xc9403fff 64bit]
>[    1.088214] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    1.088251] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    1.088298] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>[    1.088374] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    1.088412] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    1.088457] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
>[    1.088533] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    1.088573] pci 0000:00:1c.1: System wakeup disabled by ACPI
>[    1.088618] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
>[    1.088695] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    1.088731] pci 0000:00:1c.2: System wakeup disabled by ACPI
>[    1.088778] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
>[    1.088853] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    1.088890] pci 0000:00:1c.3: System wakeup disabled by ACPI
>[    1.088942] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>[    1.089214] pci 0000:00:1d.0: reg 0x10: [mem 0xc9408000-0xc94083ff]
>[    1.090830] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    1.090878] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    1.090925] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
>[    1.091091] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
>[    1.091107] pci 0000:00:1f.2: reg 0x10: [io  0x8088-0x808f]
>[    1.091114] pci 0000:00:1f.2: reg 0x14: [io  0x8094-0x8097]
>[    1.091122] pci 0000:00:1f.2: reg 0x18: [io  0x8080-0x8087]
>[    1.091130] pci 0000:00:1f.2: reg 0x1c: [io  0x8090-0x8093]
>[    1.091137] pci 0000:00:1f.2: reg 0x20: [io  0x8060-0x807f]
>[    1.091145] pci 0000:00:1f.2: reg 0x24: [mem 0xc9407000-0xc94077ff]
>[    1.091187] pci 0000:00:1f.2: PME# supported from D3hot
>[    1.091257] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>[    1.091272] pci 0000:00:1f.3: reg 0x10: [mem 0xc9405000-0xc94050ff 64bit]
>[    1.091292] pci 0000:00:1f.3: reg 0x20: [io  0x8040-0x805f]
>[    1.091426] pci 0000:01:00.0: [1002:6741] type 00 class 0x030000
>[    1.091442] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.091452] pci 0000:01:00.0: reg 0x18: [mem 0xc8400000-0xc841ffff 64bit]
>[    1.091459] pci 0000:01:00.0: reg 0x20: [io  0x7000-0x70ff]
>[    1.091470] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[    1.091514] pci 0000:01:00.0: supports D1 D2
>[    1.091536] pci 0000:01:00.0: System wakeup disabled by ACPI
>[    1.103369] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    1.103384] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
>[    1.103390] pci 0000:00:01.0:   bridge window [mem 0xc8400000-0xc93fffff]
>[    1.103398] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.103644] pci 0000:02:00.0: [8086:0091] type 00 class 0x028000
>[    1.103821] pci 0000:02:00.0: reg 0x10: [mem 0xc7400000-0xc7401fff 64bit]
>[    1.104506] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    1.104645] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    1.115508] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    1.115514] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
>[    1.115518] pci 0000:00:1c.0:   bridge window [mem 0xc7400000-0xc83fffff]
>[    1.115524] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
>[    1.115608] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
>[    1.115634] pci 0000:03:00.0: reg 0x10: [mem 0xc6400000-0xc6400fff]
>[    1.115805] pci 0000:03:00.0: supports D1 D2
>[    1.115806] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
>[    1.115849] pci 0000:03:00.0: System wakeup disabled by ACPI
>[    1.127399] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    1.127416] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
>[    1.127424] pci 0000:00:1c.1:   bridge window [mem 0xc6400000-0xc73fffff]
>[    1.127436] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
>[    1.127594] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
>[    1.127624] pci 0000:04:00.0: reg 0x10: [mem 0xc5400000-0xc5401fff 64bit]
>[    1.127771] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
>[    1.127813] pci 0000:04:00.0: System wakeup disabled by ACPI
>[    1.139457] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    1.139474] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>[    1.139489] pci 0000:00:1c.2:   bridge window [mem 0xc5400000-0xc63fffff]
>[    1.139495] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
>[    1.139632] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
>[    1.139712] pci 0000:05:00.0: reg 0x10: [io  0x3000-0x30ff]
>[    1.139832] pci 0000:05:00.0: reg 0x18: [mem 0xc3404000-0xc3404fff 64bit pref]
>[    1.139905] pci 0000:05:00.0: reg 0x20: [mem 0xc3400000-0xc3403fff 64bit pref]
>[    1.140291] pci 0000:05:00.0: supports D1 D2
>[    1.140292] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    1.140433] pci 0000:05:00.0: System wakeup disabled by ACPI
>[    1.151445] pci 0000:00:1c.3: PCI bridge to [bus 05]
>[    1.151462] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
>[    1.151470] pci 0000:00:1c.3:   bridge window [mem 0xc4400000-0xc53fffff]
>[    1.151482] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc43fffff 64bit pref]
>[    1.152195] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
>[    1.152257] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
>[    1.152314] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
>[    1.152371] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
>[    1.152427] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
>[    1.152485] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    1.152544] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
>[    1.152600] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
>[    1.152728] ACPI: Enabled 6 GPEs in block 00 to 3F
>[    1.152772] ACPI : EC: EC stopped
>[    1.152810] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>[    1.152814] ACPI : EC: EC started
>[    1.711998] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    1.712003] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    1.712012] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
>[    1.712018] vgaarb: loaded
>[    1.712021] vgaarb: bridge control possible 0000:01:00.0
>[    1.712024] vgaarb: no bridge control possible 0000:00:02.0
>[    1.712099] PCI: Using ACPI for IRQ routing
>[    1.718467] PCI: pci_cache_line_size set to 64 bytes
>[    1.718626] e820: reserve RAM buffer [mem 0x00094400-0x0009ffff]
>[    1.718628] e820: reserve RAM buffer [mem 0x9ae3f000-0x9bffffff]
>[    1.718629] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
>[    1.718630] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
>[    1.718732] NetLabel: Initializing
>[    1.718736] NetLabel:  domain hash size = 128
>[    1.718739] NetLabel:  protocols = UNLABELED CIPSOv4
>[    1.718759] NetLabel:  unlabeled traffic allowed by default
>[    1.718813] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    1.718821] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    1.720847] clocksource: Switched to clocksource hpet
>[    1.727729] VFS: Disk quotas dquot_6.6.0
>[    1.740883] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.756963] AppArmor: AppArmor Filesystem Enabled
>[    1.757016] pnp: PnP ACPI init
>[    1.757219] system 00:00: [io  0x0680-0x069f] has been reserved
>[    1.757225] system 00:00: [io  0x1000-0x100f] has been reserved
>[    1.757229] system 00:00: [io  0xffff] has been reserved
>[    1.757234] system 00:00: [io  0xffff] has been reserved
>[    1.757238] system 00:00: [io  0x0400-0x0453] has been reserved
>[    1.757242] system 00:00: [io  0x0458-0x047f] has been reserved
>[    1.757247] system 00:00: [io  0x0500-0x057f] has been reserved
>[    1.757252] system 00:00: [io  0x164e-0x164f] has been reserved
>[    1.757256] system 00:00: [io  0x2000] has been reserved
>[    1.757260] system 00:00: [io  0x2004] has been reserved
>[    1.757266] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.757296] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    1.757341] system 00:02: [io  0x0454-0x0457] has been reserved
>[    1.757346] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    1.757378] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
>[    1.757408] pnp 00:04: Plug and Play ACPI device, IDs SNYa001 PNP0f13 (active)
>[    1.757551] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    1.757556] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
>[    1.757560] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
>[    1.757564] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
>[    1.757569] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
>[    1.757573] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    1.757577] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
>[    1.757582] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
>[    1.757586] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    1.757590] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
>[    1.757595] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.757942] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
>[    1.757947] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
>[    1.757952] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    1.757966] pnp: PnP ACPI: found 7 devices
>[    1.764350] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    1.764360] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
>[    1.764405] pci 0000:01:00.0: BAR 6: assigned [mem 0xc8420000-0xc843ffff pref]
>[    1.764412] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    1.764416] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
>[    1.764421] pci 0000:00:01.0:   bridge window [mem 0xc8400000-0xc93fffff]
>[    1.764426] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.764434] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    1.764440] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
>[    1.764447] pci 0000:00:1c.0:   bridge window [mem 0xc7400000-0xc83fffff]
>[    1.764454] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
>[    1.764465] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    1.764471] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
>[    1.764478] pci 0000:00:1c.1:   bridge window [mem 0xc6400000-0xc73fffff]
>[    1.764485] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
>[    1.764496] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    1.764501] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>[    1.764509] pci 0000:00:1c.2:   bridge window [mem 0xc5400000-0xc63fffff]
>[    1.764515] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
>[    1.764526] pci 0000:00:1c.3: PCI bridge to [bus 05]
>[    1.764532] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
>[    1.764539] pci 0000:00:1c.3:   bridge window [mem 0xc4400000-0xc53fffff]
>[    1.764546] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc43fffff 64bit pref]
>[    1.764557] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    1.764559] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    1.764560] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    1.764561] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
>[    1.764562] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
>[    1.764564] pci_bus 0000:01: resource 1 [mem 0xc8400000-0xc93fffff]
>[    1.764565] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.764566] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
>[    1.764567] pci_bus 0000:02: resource 1 [mem 0xc7400000-0xc83fffff]
>[    1.764568] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
>[    1.764569] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
>[    1.764570] pci_bus 0000:03: resource 1 [mem 0xc6400000-0xc73fffff]
>[    1.764571] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
>[    1.764573] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
>[    1.764574] pci_bus 0000:04: resource 1 [mem 0xc5400000-0xc63fffff]
>[    1.764575] pci_bus 0000:04: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
>[    1.764576] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
>[    1.764577] pci_bus 0000:05: resource 1 [mem 0xc4400000-0xc53fffff]
>[    1.764578] pci_bus 0000:05: resource 2 [mem 0xc3400000-0xc43fffff 64bit pref]
>[    1.868860] NET: Registered protocol family 2
>[    1.884977] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    1.885115] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    1.885243] TCP: Hash tables configured (established 65536 bind 65536)
>[    1.885272] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    1.885302] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    1.885372] NET: Registered protocol family 1
>[    1.885391] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    1.936779] PCI: CLS 64 bytes, default 64
>[    1.936828] Unpacking initramfs...
>[    2.502249] Freeing initrd memory: 34056K (ffff925db3d6b000 - ffff925db5ead000)
>[    2.502260] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    2.502265] software IO TLB [mem 0x96e3f000-0x9ae3f000] (64MB) mapped at [ffff925e16e3f000-ffff925e1ae3efff]
>[    2.502500] simple-framebuffer simple-framebuffer.0: framebuffer at 0xb0000000, 0x7e9000 bytes, mapped to 0xffffc10381000000
>[    2.502508] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
>[    2.507165] Console: switching to colour frame buffer device 240x67
>[    2.511821] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
>[    2.537127] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    2.552869] audit: initializing netlink subsys (disabled)
>[    2.552969] audit: type=2000 audit(1473432135.548:1): initialized
>[    2.553402] Initialise system trusted keyrings
>[    2.553517] workingset: timestamp_bits=40 max_order=21 bucket_order=0
>[    2.553552] zbud: loaded
>[    2.618001] Key type asymmetric registered
>[    2.618021] Asymmetric key parser 'x509' registered
>[    2.632873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>[    2.632994] io scheduler noop registered
>[    2.633012] io scheduler deadline registered
>[    2.633034] io scheduler cfq registered (default)
>[    2.633524] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    2.633552] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    2.633590] intel_idle: MWAIT substates: 0x21120
>[    2.633591] intel_idle: v0.4.1 model 0x2A
>[    2.633753] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    2.633941] GHES: HEST is not enabled!
>[    2.634014] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    2.634467] Linux agpgart interface v0.103
>[    2.634530] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
>[    2.634555] AMD IOMMUv2 functionality not available on this system
>[    2.634929] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    2.638089] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.638114] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    2.638337] mousedev: PS/2 mouse device common for all mice
>[    2.638399] rtc_cmos 00:01: RTC can wake from S4
>[    2.638585] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    2.638636] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    2.638675] intel_pstate: Intel P-state driver initializing
>[    2.639048] ledtrig-cpu: registered to indicate activity on CPUs
>[    2.657071] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    2.716973] NET: Registered protocol family 10
>[    2.733026] mip6: Mobile IPv6
>[    2.733045] NET: Registered protocol family 17
>[    2.733066] mpls_gso: MPLS GSO support
>[    2.733367] microcode: sig=0x206a7, pf=0x10, revision=0x14
>[    2.733511] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    2.733953] registered taskstats version 1
>[    2.733972] Loading compiled-in X.509 certificates
>[    2.735651] alg: No test for pkcs1pad(rsa,sha512) (pkcs1pad(rsa-generic,sha512))
>[    2.736491] Loaded X.509 cert 'Build time autogenerated kernel key: b3359c5073e04488eb70a15a75274251227ea32b'
>[    2.736543] zswap: loaded using pool lzo/zbud
>[    2.736657] AppArmor: AppArmor sha1 policy hashing enabled
>[    2.738297] rtc_cmos 00:01: setting system clock to 2016-09-09 14:42:16 UTC (1473432136)
>[    2.739571] PM: Hibernation image not present or could not be loaded.
>[    2.740591] Freeing unused kernel memory: 1372K (ffffffff83325000 - ffffffff8347c000)
>[    2.741784] Write protecting the kernel read-only data: 12288k
>[    2.743423] Freeing unused kernel memory: 2012K (ffff925f00809000 - ffff925f00a00000)
>[    2.747041] Freeing unused kernel memory: 1308K (ffff925f00cb9000 - ffff925f00e00000)
>[    2.754708] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.767258] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    2.767816] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.767843] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.768730] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.768775] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.768787] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.769120] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.769162] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.769206] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.769245] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.791532] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
>[    2.793671] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
>[    2.795662] ACPI: Lid Switch [LID0]
>[    2.797475] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    2.799237] ACPI: Power Button [PWRB]
>[    2.815390] thermal LNXTHERM:00: registered as thermal_zone0
>[    2.817149] ACPI: Thermal Zone [TZ01] (61 C)
>[    2.827107] [drm:drm_core_init] Initialized drm 1.1.0 20060810
>[    2.829089] ACPI: bus type USB registered
>[    2.831033] usbcore: registered new interface driver usbfs
>[    2.834620] usbcore: registered new interface driver hub
>[    2.836412] usbcore: registered new device driver usb
>[    2.842167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.845837] ehci-pci: EHCI PCI platform driver
>[    2.847873] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    2.853977] SCSI subsystem initialized
>[    2.858905] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 25
>[    2.860946] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    2.862874] ehci-pci 0000:00:1a.0: debug port 2
>[    2.866039] libata version 3.00 loaded.
>[    2.868682] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    2.871919] ehci-pci 0000:00:1a.0: irq 23, io mem 0xc9409000
>[    2.874075] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    2.875396] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
>[    2.877254] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc10380e76000, f0:bf:97:cf:95:26, XID 0c200000 IRQ 26
>[    2.879033] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    2.888867] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    2.890698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.892433] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.894194] usb usb1: Product: EHCI Host Controller
>[    2.895931] usb usb1: Manufacturer: Linux 4.8.0-rc5+ ehci_hcd
>[    2.897762] usb usb1: SerialNumber: 0000:00:1a.0
>[    2.899798] hub 1-0:1.0: USB hub found
>[    2.901883] hub 1-0:1.0: 2 ports detected
>[    2.904177] xhci_hcd 0000:04:00.0: xHCI Host Controller
>[    2.906042] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
>[    2.907923] xhci_hcd 0000:04:00.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000004
>[    2.909996] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.911880] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.913676] usb usb2: Product: xHCI Host Controller
>[    2.915578] usb usb2: Manufacturer: Linux 4.8.0-rc5+ xhci-hcd
>[    2.917417] usb usb2: SerialNumber: 0000:04:00.0
>[    2.917770] ahci 0000:00:1f.2: version 3.0
>[    2.918095] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    2.921251] [drm:radeon_init] radeon kernel modesetting enabled.
>[    2.921288] hub 2-0:1.0: USB hub found
>[    2.921299] hub 2-0:1.0: 2 ports detected
>[    2.921427] xhci_hcd 0000:04:00.0: xHCI Host Controller
>[    2.921431] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
>[    2.921463] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
>[    2.921489] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.921490] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.921492] usb usb3: Product: xHCI Host Controller
>[    2.921493] usb usb3: Manufacturer: Linux 4.8.0-rc5+ xhci-hcd
>[    2.921494] usb usb3: SerialNumber: 0000:04:00.0
>[    2.921629] hub 3-0:1.0: USB hub found
>[    2.921639] hub 3-0:1.0: 2 ports detected
>[    2.932900] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x11 impl RAID mode
>[    2.932903] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part apst 
>[    2.934860] scsi host0: ahci
>[    2.935298] scsi host1: ahci
>[    2.935416] scsi host2: ahci
>[    2.935522] scsi host3: ahci
>[    2.935629] scsi host4: ahci
>[    2.935740] scsi host5: ahci
>[    2.935810] ata1: SATA max UDMA/133 abar m2048@0xc9407000 port 0xc9407100 irq 32
>[    2.935811] ata2: DUMMY
>[    2.935812] ata3: DUMMY
>[    2.935813] ata4: DUMMY
>[    2.935815] ata5: SATA max UDMA/133 abar m2048@0xc9407000 port 0xc9407300 irq 32
>[    2.935816] ata6: DUMMY
>[    2.936245] [drm:intel_detect_pch] Found CougarPoint PCH
>[    2.936248] [drm:get_allowed_dc_mask] Allowed DC state mask 00
>[    2.956638] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
>[    2.958384] ATPX version 1, functions 0x00000032
>[    2.966039] CRAT table not found
>[    2.967759] Finished initializing topology ret=0
>[    2.969646] [drm:intel_device_info_dump] i915 device info: gen=6, pciid=0x0116 rev=0x09 flags=is_mobile,has_fbc,has_rc6,has_rc6p,has_gmbus_irq,has_hw_contexts,has_hotplug,has_llc,
>[    2.969788] [drm:intel_device_info_runtime_init] slice mask: 0000
>[    2.969789] [drm:intel_device_info_runtime_init] slice total: 0
>[    2.969790] [drm:intel_device_info_runtime_init] subslice total: 0
>[    2.969791] [drm:intel_device_info_runtime_init] subslice mask 0000
>[    2.969792] [drm:intel_device_info_runtime_init] subslice per slice: 0
>[    2.969793] [drm:intel_device_info_runtime_init] EU total: 0
>[    2.969794] [drm:intel_device_info_runtime_init] EU per subslice: 0
>[    2.969795] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    2.969796] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    2.969797] [drm:intel_device_info_runtime_init] has EU power gating: n
>[    2.969799] [drm:intel_sanitize_options] ppgtt mode: 1
>[    2.969800] [drm:intel_sanitize_options] use GPU sempahores? yes
>[    2.969809] [drm:i915_ggtt_probe_hw] Memory usable by graphics device = 2048M
>[    2.971538] [drm:i915_ggtt_probe_hw] GMADR size = 256M
>[    2.971540] [drm:i915_ggtt_probe_hw] GTT stolen size = 64M
>[    2.971543] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
>[    2.971544] fb: switching to inteldrmfb from simple
>[    2.973260] kfd kfd: Initialized module
>[    2.975202] Console: switching to colour dummy device 80x25
>[    2.975296] [drm:i915_kick_out_vgacon] Replacing VGA console driver
>[    2.975329] radeon 0000:01:00.0: enabling device (0000 -> 0003)
>[    2.975541] [drm:radeon_device_init] initializing kernel modesetting (TURKS 0x1002:0x6741 0x104D:0x907B 0x00).
>[    2.975563] [drm:radeon_device_init] register mmio base: 0xC8400000
>[    2.975568] [drm:radeon_device_init] register mmio size: 131072
>[    2.976273] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 65536K
>[    2.976282] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9af66018
>[    2.976288] [drm:intel_opregion_setup] Public ACPI methods supported
>[    2.976289] [drm:intel_opregion_setup] SWSCI supported
>[    2.990893] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
>[    2.990896] [drm:intel_opregion_setup] ASLE supported
>[    2.990896] [drm:intel_opregion_setup] ASLE extension supported
>[    2.990898] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    2.990937] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.990949] [drm:drm_vblank_init] Driver supports precise vblank timestamp query.
>[    2.990959] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    2.990961] [drm:intel_bios_init] VBT signature "$VBT SANDYBRIDGE-M  ", BDB version 161
>[    2.990963] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.990964] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    2.994878] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0)
>[    2.994881] [drm:parse_lfp_panel_data] Panel type: 12 (VBT)
>[    2.994882] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    2.994885] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    2.994888] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 144200 1920 1968 2040 2116 1080 1083 1088 1137 0x8 0xa
>[    2.994889] [drm:parse_lfp_panel_data] VBT initial LVDS value 33c
>[    2.994891] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 210 Hz, active high, min brightness 5, level 85
>[    2.994893] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    2.994895] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.994896] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    2.994898] [drm:parse_driver_features] DRRS State Enabled:0
>[    2.994899] [drm:parse_psr] No PSR BDB found.
>[    2.997910] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    2.997920] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    2.997922] vga_switcheroo: enabled
>[    2.997939] [drm:intel_update_rawclk] rawclk rate: 125000 kHz
>[    2.997943] [drm:intel_power_well_enable] enabling always-on
>[    2.998254] [drm:intel_fbc_init] Sanitized enable_fbc value: 0
>[    2.998258] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
>[    2.998259] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    2.998260] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    2.998262] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    2.998263] [drm:intel_print_wm_latency] Sprite WM0 latency 7 (0.7 usec)
>[    2.998264] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    2.998266] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    2.998267] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    2.998270] [drm:intel_print_wm_latency] Cursor WM0 latency 7 (0.7 usec)
>[    2.998271] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    2.998273] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    2.998274] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    2.998275] [drm:snb_wm_latency_quirk] WM latency values increased to avoid potential underruns
>[    2.998277] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec)
>[    2.998278] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    2.998279] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    2.998280] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    2.998282] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec)
>[    2.998283] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    2.998284] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    2.998285] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    2.998286] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec)
>[    2.998289] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    2.998290] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    2.998291] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    2.998295] [drm:intel_modeset_init] 2 display pipes available.
>[    2.998311] [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
>[    2.998314] [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
>[    2.998315] [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
>[    2.998319] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
>[    2.998330] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
>[    2.998670] [drm:intel_lvds_pps_get_hw_state] LVDS PPS:t1+t2 500 t3 500 t4 6000 t5 2300 tx 2300 divider 6249 port 0 powerdown_on_reset 1
>[    2.998990] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
>[    2.998991] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry
>[    2.999248] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
>[    2.999252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[    2.999254] [drm:intel_lvds_init] using mode from VBT: 
>[    2.999257] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 144200 1920 1968 2040 2116 1080 1083 1088 1137 0x8 0xa
>[    2.999265] [drm:intel_panel_setup_backlight] Connector LVDS-1 backlight initialized, enabled, brightness 4648/4648
>[    2.999266] [drm:intel_lvds_init] detected dual-link lvds configuration
>[    2.999291] [drm:intel_crt_reset] crt adpa set to 0xf40000
>[    2.999296] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    3.000066] [drm:intel_sdvo_read_byte] i2c transfer returned -6
>[    3.000067] [drm:intel_sdvo_init] No SDVO device found on SDVOB
>[    3.000102] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    3.000107] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B
>[    3.000130] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    3.000143] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C
>[    3.000155] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    3.000165] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 using_ssc_source 1
>[    3.000168] [drm:ironlake_init_pch_refclk] Using SSC on panel
>[    3.000586] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled
>[    3.000589] [drm:intel_modeset_readout_hw_state] [CRTC:30:pipe B] hw state readout: disabled
>[    3.000593] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1
>[    3.000598] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0
>[    3.000603] [drm:intel_modeset_readout_hw_state] [ENCODER:33:LVDS] hw state readout: enabled, pipe A
>[    3.000606] [drm:intel_modeset_readout_hw_state] [ENCODER:37:CRT] hw state readout: disabled, pipe A
>[    3.000609] [drm:intel_modeset_readout_hw_state] [ENCODER:38:HDMI B] hw state readout: disabled, pipe A
>[    3.000613] [drm:intel_modeset_readout_hw_state] [ENCODER:43:DP B] hw state readout: disabled, pipe A
>[    3.000616] [drm:intel_modeset_readout_hw_state] [ENCODER:45:HDMI C] hw state readout: disabled, pipe A
>[    3.000619] [drm:intel_modeset_readout_hw_state] [ENCODER:47:DP C] hw state readout: disabled, pipe A
>[    3.000622] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:LVDS-1] hw state readout: enabled
>[    3.000625] [drm:intel_modeset_readout_hw_state] [CONNECTOR:36:VGA-1] hw state readout: disabled
>[    3.000628] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:HDMI-A-1] hw state readout: disabled
>[    3.000631] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:DP-1] hw state readout: disabled
>[    3.000634] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:HDMI-A-2] hw state readout: disabled
>[    3.000637] [drm:intel_modeset_readout_hw_state] [CONNECTOR:48:DP-2] hw state readout: disabled
>[    3.000650] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff925fcee24800 for pipe A
>[    3.000651] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    3.000652] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[    3.000654] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 2520077, gmch_n: 8388608, link_m: 280008, link_n: 524288, tu: 64
>[    3.000656] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.000657] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.000658] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.000659] [drm:intel_dump_pipe_config] requested mode:
>[    3.000662] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 144286 1920 1968 2040 2116 1080 1083 1088 1137 0x40 0xa
>[    3.000663] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.000665] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 144286 1920 1968 2040 2116 1080 1083 1088 1137 0x40 0xa
>[    3.000667] [drm:intel_dump_crtc_timings] crtc timings: 144286 1920 1968 2040 2116 1080 1083 1088 1137, type: 0x40 flags: 0xa
>[    3.000668] [drm:intel_dump_pipe_config] port clock: 144286
>[    3.000669] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    3.000670] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    3.000672] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.000673] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    3.000674] [drm:intel_dump_pipe_config] ips: 0
>[    3.000674] [drm:intel_dump_pipe_config] double wide: 0
>[    3.000676] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x89046004, dpll_md: 0x0, fp0: 0x21009, fp1: 0x30d07
>[    3.000677] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.000678] [drm:intel_dump_pipe_config] [PLANE:23:primary A] disabled, scaler_id = 0
>[    3.000679] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0
>[    3.000680] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0
>[    3.000682] [drm:intel_dump_pipe_config] [CRTC:30:pipe B][setup_hw_state] config ffff925fcedcb000 for pipe B
>[    3.000683] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    3.000684] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    3.000686] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.000687] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.000688] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.000689] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.000690] [drm:intel_dump_pipe_config] requested mode:
>[    3.000692] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.000693] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.000694] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.000696] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.000697] [drm:intel_dump_pipe_config] port clock: 0
>[    3.000698] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    3.000699] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    3.000701] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.000702] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.000703] [drm:intel_dump_pipe_config] ips: 0
>[    3.000704] [drm:intel_dump_pipe_config] double wide: 0
>[    3.000705] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[    3.000706] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.000707] [drm:intel_dump_pipe_config] [PLANE:28:primary B] disabled, scaler_id = 0
>[    3.000709] [drm:intel_dump_pipe_config] [PLANE:29:cursor B] disabled, scaler_id = 0
>[    3.000710] [drm:intel_dump_pipe_config] [PLANE:31:sprite B] disabled, scaler_id = 0
>[    3.000718] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    3.000721] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    3.000725] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    3.000732] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff925fce862580
>[    3.000760] [drm:i915_gem_init_ggtt] clearing unused GTT space: [7e9000, 7ffff000]
>[    3.002832] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    3.003939] [drm:i915_gem_context_init] HW context support initialized
>[    3.004387] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    3.004390] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=131072
>[    3.004399] [drm:init_status_page] render ring hws offset: 0x7fde2000
>[    3.004402] [drm:i915_gem_object_create_stolen] creating stolen object: size=1000
>[    3.004404] [drm:i915_pages_create_for_stolen] offset=0x809000, size=4096
>[    3.004407] [drm:intel_engine_create_scratch] render ring pipe control offset: 0x7fffe000
>[    3.004454] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    3.004459] [drm:i915_pages_create_for_stolen] offset=0x80a000, size=131072
>[    3.004469] [drm:init_status_page] blitter ring hws offset: 0x00809000
>[    3.005005] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    3.005009] [drm:i915_pages_create_for_stolen] offset=0x82a000, size=131072
>[    3.005027] [drm:init_status_page] bsd ring hws offset: 0x0082a000
>[    3.005066] [drm:intel_guc_setup] GuC fw status: path (null), fetch NONE, load NONE
>[    3.005075] [drm:intel_init_gt_powersave] Overclocking supported, max: 1200MHz, overclock: 1200MHz
>[    3.005077] [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
>[    3.005091] [drm:gen6_check_mch_setup] Wrong MCH_SSKPD value: 0x16040307 This can cause underruns.
>[    3.005109] [drm:intel_fbdev_init_bios] found possible fb from plane A
>[    3.005110] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[    3.005110] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
>[    3.005112] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    3.005113] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400)
>[    3.005114] [drm:intel_fbdev_init_bios] pipe B not active, skipping
>[    3.005115] [drm:intel_fbdev_init_bios] using BIOS fb for initial console
>[    3.005128] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=0
>[    3.005131] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[    3.015002] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    3.015004] [drm:intel_crt_detect] CRT not detected via hotplug
>[    3.015326] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.015328] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    3.015485] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.015491] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.015492] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.015494] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.016224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.016227] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.016228] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.016231] [drm:drm_helper_hpd_irq_event] [CONNECTOR:36:VGA-1] status updated from unknown to disconnected
>[    3.016232] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[    3.016394] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.016395] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.016789] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.016792] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.016951] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.016952] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.017108] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.017113] [drm:drm_helper_hpd_irq_event] [CONNECTOR:39:HDMI-A-1] status updated from unknown to disconnected
>[    3.017115] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[    3.017120] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:DP-1] status updated from unknown to disconnected
>[    3.017121] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[    3.017284] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.017286] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.017441] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.017444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.017609] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.017611] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.017766] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.017770] [drm:drm_helper_hpd_irq_event] [CONNECTOR:46:HDMI-A-2] status updated from unknown to disconnected
>[    3.017771] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[    3.017775] [drm:drm_helper_hpd_irq_event] [CONNECTOR:48:DP-2] status updated from unknown to disconnected
>[    3.038825] ATOM BIOS: Sony
>[    3.038977] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>[    3.038983] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
>[    3.038988] [drm:radeon_bo_init] Detected VRAM RAM=1024M, BAR=256M
>[    3.038991] [drm:radeon_bo_init] RAM width 128bits DDR
>[    3.039062] [TTM] Zone  kernel: Available graphics memory: 4046074 kiB
>[    3.039065] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    3.039068] [TTM] Initializing pool allocator
>[    3.039074] [TTM] Initializing DMA pool allocator
>[    3.039095] [drm:radeon_ttm_init] radeon: 1024M of VRAM memory ready
>[    3.039098] [drm:radeon_ttm_init] radeon: 1024M of GTT memory ready.
>[    3.039111] [drm:ni_init_microcode] Loading TURKS Microcode
>[    3.039177] [drm:radeon_atombios_add_pplib_thermal_controller] Internal thermal controller without fan control
>[    3.043479] [drm:radeon_pm_init_dpm] radeon: dpm initialized
>[    3.043549] [drm:radeon_gart_init] GART: num cpu pages 262144, num gpu pages 262144
>[    3.044121] [drm:evergreen_pcie_gen2_enable] PCIE gen 2 link speeds already enabled
>[    3.046688] [drm:evergreen_pcie_gart_enable] PCIE GART of 1024M enabled (table at 0x0000000000162000).
>[    3.046802] radeon 0000:01:00.0: WB enabled
>[    3.046806] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff925fcdd1cc00
>[    3.046812] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff925fcdd1cc0c
>[    3.047562] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc10381032118
>[    3.047568] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    3.047573] [drm:drm_vblank_init] Driver supports precise vblank timestamp query.
>[    3.047578] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
>[    3.047626] radeon 0000:01:00.0: radeon: using MSI.
>[    3.047683] [drm:radeon_irq_kms_init] radeon: irq initialized.
>[    3.064218] [drm:r600_ring_test] ring test on 0 succeeded in 2 usecs
>[    3.064234] [drm:r600_dma_ring_test] ring test on 3 succeeded in 7 usecs
>[    3.240226] [drm:uvd_v1_0_ring_test] ring test on 5 succeeded in 2 usecs
>[    3.240242] [drm:uvd_v1_0_init] UVD initialized successfully.
>[    3.240513] [drm:r600_ib_test] ib test on ring 0 succeeded in 0 usecs
>[    3.240591] [drm:r600_dma_ib_test] ib test on ring 3 succeeded in 0 usecs
>[    3.251266] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.299240] ata1.00: ATA-8: TOSHIBA MK5059GSXP, GT001H, max UDMA/100
>[    3.299245] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    3.300096] ata1.00: configured for UDMA/100
>[    3.300290] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK5059GS 1H   PQ: 0 ANSI: 5
>[    3.356854] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    3.505435] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    3.505457] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.505845] hub 1-1:1.0: USB hub found
>[    3.506083] hub 1-1:1.0: 6 ports detected
>[    3.524953] tsc: Refined TSC clocksource calibration: 2394.560 MHz
>[    3.524990] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns
>[    3.602040] psmouse serio1: synaptics: queried max coordinates: x [..5508], y [..4550]
>[    3.623142] random: fast init done
>[    3.657751] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400/0x0, board id: 0, fw id: 886330
>[    3.694015] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
>[    3.752359] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    3.754733] ata5.00: ATAPI: MATSHITADVD-RAM UJ8A2AS, 1.20, max UDMA/100
>[    3.758558] ata5.00: configured for UDMA/100
>[    3.763336] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8A2AS  1.20 PQ: 0 ANSI: 5
>[    3.786691] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    3.786760] sd 0:0:0:0: [sda] Write Protect is off
>[    3.786767] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    3.786789] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.796960] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
>[    3.799941] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    3.799966] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    3.800219] sr 4:0:0:0: Attached scsi CD-ROM sr0
>[    3.882723]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>[    3.883455] sd 0:0:0:0: [sda] Attached SCSI disk
>[    3.909098] [drm:uvd_v1_0_ib_test] ib test on ring 5 succeeded
>[    3.913300] usb 1-1.2: New USB device found, idVendor=8086, idProduct=0189
>[    3.913306] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.914844] [drm:radeon_print_display_setup] Radeon Display Connectors
>[    3.926796] [drm:radeon_acpi_init] Call to ATCS verify_interface failed: -5
>[    3.926799] [drm:radeon_acpi_init] Call to ATIF verify_interface failed: -5
>[    3.926808] [drm:drm_get_pci_dev] Initialized radeon 2.47.0 20080528 for 0000:01:00.0 on minor 1
>[    3.927827] [drm:intel_backlight_device_register] Connector LVDS-1 backlight sysfs interface registered
>[    3.927927] [drm:intel_dp_connector_register] registering DPDDC-B bus for card0-DP-1
>[    3.928025] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-2
>[    3.928368] [drm:intel_didl_outputs] 8 outputs detected
>[    3.928417] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>[    3.928943] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
>[    3.929359] [drm:asle_set_backlight] bclp = 0x800000ff
>[    3.929361] [drm:asle_set_backlight] updating opregion backlight 255/255
>[    3.929364] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4648
>[    3.929658] [drm:asle_set_backlight] bclp = 0x800000ff
>[    3.929660] [drm:asle_set_backlight] updating opregion backlight 255/255
>[    3.929662] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4648
>[    3.929758] acpi LNXVIDEO:02: registered as cooling_device4
>[    3.929836] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:26/LNXVIDEO:00/input/input5
>[    3.929885] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.929902] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.929919] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.929936] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.929952] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.929968] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.929984] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.930460] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.930828] [drm:asle_set_backlight] bclp = 0x8000000f
>[    3.930831] [drm:asle_set_backlight] updating opregion backlight 15/255
>[    3.930833] [drm:intel_panel_actually_set_backlight] set backlight PWM = 273
>[    3.931127] [drm:asle_set_backlight] bclp = 0x800000ff
>[    3.931129] [drm:asle_set_backlight] updating opregion backlight 255/255
>[    3.931130] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4648
>[    3.931419] acpi device:29: registered as cooling_device5
>[    3.931768] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:09/input/input6
>[    3.931815] [drm:i915_driver_load] Initialized i915 1.6.0 20160902 for 0000:00:02.0 on minor 0
>[    3.931817] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1]
>[    3.931819] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1]
>[    3.931822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] status updated from unknown to connected
>[    3.931829] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes :
>[    3.931833] [drm:drm_mode_debug_printmodeline] Modeline 51:"1920x1080" 60 144200 1920 1968 2040 2116 1080 1083 1088 1137 0x8 0xa
>[    3.931835] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1]
>[    3.931836] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1
>[    3.931841] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    3.931842] [drm:intel_crt_detect] CRT not detected via hotplug
>[    3.931965] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    3.931978] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
>[    3.931999] ehci-pci 0000:00:1d.0: debug port 2
>[    3.932162] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.932163] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    3.932324] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.932328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.932329] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.932331] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.933132] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.933134] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.933135] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.933137] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected
>[    3.933139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1]
>[    3.933140] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[    3.933301] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.933302] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.933461] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.933464] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.933623] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.933625] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.933784] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.933787] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected
>[    3.933789] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1]
>[    3.933791] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[    3.933795] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected
>[    3.933797] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[    3.933798] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[    3.933957] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.933959] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.934116] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.934119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.934279] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.934280] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.934436] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.934441] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[    3.934443] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2]
>[    3.934445] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[    3.934448] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected
>[    3.934451] [drm:drm_setup_crtcs] 
>[    3.934454] [drm:drm_enable_connectors] connector 32 enabled? yes
>[    3.934455] [drm:drm_enable_connectors] connector 36 enabled? no
>[    3.934456] [drm:drm_enable_connectors] connector 39 enabled? no
>[    3.934457] [drm:drm_enable_connectors] connector 44 enabled? no
>[    3.934458] [drm:drm_enable_connectors] connector 46 enabled? no
>[    3.934459] [drm:drm_enable_connectors] connector 48 enabled? no
>[    3.934462] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
>[    3.934464] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0
>[    3.934466] [drm:intel_fb_initial_config] connector LVDS-1 on [CRTC:26:pipe A]: 1920x1080
>[    3.934467] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    3.934468] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    3.934469] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    3.934470] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    3.934471] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    3.934473] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    3.934476] [drm:intelfb_create] re-using BIOS fb
>[    3.934483] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000
>[    3.934532] [drm:drm_fb_helper_hotplug_event] 
>[    3.934534] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1]
>[    3.934535] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1]
>[    3.934540] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes :
>[    3.934543] [drm:drm_mode_debug_printmodeline] Modeline 51:"1920x1080" 60 144200 1920 1968 2040 2116 1080 1083 1088 1137 0x8 0xa
>[    3.934544] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1]
>[    3.934545] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1
>[    3.934548] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    3.934549] [drm:intel_crt_detect] CRT not detected via hotplug
>[    3.934594] fbcon: inteldrmfb (fb0) is primary device
>[    3.934715] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.934716] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    3.934874] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.934876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.934877] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.934878] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.935647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.935649] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.935650] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.935652] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected
>[    3.935654] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1]
>[    3.935655] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[    3.935815] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.935816] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.935908] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    3.935923] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc9408000
>[    3.936009] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.936011] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.936173] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.936176] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.936336] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.936341] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected
>[    3.936344] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1]
>[    3.936347] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[    3.936353] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected
>[    3.936355] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[    3.936358] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[    3.936520] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.936523] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.936684] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.936688] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.936852] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.936853] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.937008] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.937009] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[    3.937010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2]
>[    3.937011] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[    3.937014] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected
>[    3.937019] [drm:drm_setup_crtcs] 
>[    3.937032] [drm:drm_enable_connectors] connector 32 enabled? yes
>[    3.937033] [drm:drm_enable_connectors] connector 36 enabled? no
>[    3.937034] [drm:drm_enable_connectors] connector 39 enabled? no
>[    3.937035] [drm:drm_enable_connectors] connector 44 enabled? no
>[    3.937036] [drm:drm_enable_connectors] connector 46 enabled? no
>[    3.937037] [drm:drm_enable_connectors] connector 48 enabled? no
>[    3.937039] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
>[    3.937040] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0
>[    3.937042] [drm:intel_fb_initial_config] connector LVDS-1 on [CRTC:26:pipe A]: 1920x1080
>[    3.937043] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    3.937044] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    3.937044] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    3.937045] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    3.937046] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    3.937047] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    3.937073] [drm:connected_sink_compute_bpp] [CONNECTOR:32:LVDS-1] checking for sink bpp constrains
>[    3.937074] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    3.937076] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
>[    3.937077] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
>[    3.937078] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[    3.937080] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff925fcd845000 for pipe A
>[    3.937081] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    3.937081] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[    3.937082] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5040155, gmch_n: 8388608, link_m: 280008, link_n: 524288, tu: 64
>[    3.937083] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.937084] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.937085] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.937085] [drm:intel_dump_pipe_config] requested mode:
>[    3.937087] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 144200 1920 1968 2040 2116 1080 1083 1088 1137 0x8 0xa
>[    3.937088] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.937089] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 144200 1920 1968 2040 2116 1080 1083 1088 1137 0x8 0xa
>[    3.937090] [drm:intel_dump_crtc_timings] crtc timings: 144200 1920 1968 2040 2116 1080 1083 1088 1137, type: 0x8 flags: 0xa
>[    3.937091] [drm:intel_dump_pipe_config] port clock: 144200
>[    3.937091] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    3.937092] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    3.937093] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.937094] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.937094] [drm:intel_dump_pipe_config] ips: 0
>[    3.937095] [drm:intel_dump_pipe_config] double wide: 0
>[    3.937096] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x89046004, dpll_md: 0x0, fp0: 0x21009, fp1: 0x30d07
>[    3.937096] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.937099] [drm:intel_dump_pipe_config] [PLANE:23:primary A] enabled
>[    3.937100] [drm:intel_dump_pipe_config] 	FB:50, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[    3.937100] [drm:intel_dump_pipe_config] 	scaler:0 src 0x0+1920+1080 dst 0x0+1920+1080
>[    3.937101] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0
>[    3.937102] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0
>[    3.937107] [drm:ironlake_crtc_compute_clock] using SSC reference clock of 120000 kHz
>[    3.937125] [drm:intel_find_shared_dpll] [CRTC:26:pipe A] allocated PCH DPLL A
>[    3.937126] [drm:intel_reference_shared_dpll] using PCH DPLL A for pipe A
>[    3.937144] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    3.937151] [drm:intel_disable_pipe] disabling pipe A
>[    3.992929] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
>[    4.008963] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    4.009058] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>[    4.009059] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.009060] usb usb4: Product: EHCI Host Controller
>[    4.009061] usb usb4: Manufacturer: Linux 4.8.0-rc5+ ehci_hcd
>[    4.009062] usb usb4: SerialNumber: 0000:00:1d.0
>[    4.009281] hub 4-0:1.0: USB hub found
>[    4.009287] hub 4-0:1.0: 2 ports detected
>[    4.122283] usb 1-1.3: New USB device found, idVendor=05ca, idProduct=18c0
>[    4.122287] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    4.122290] usb 1-1.3: Product: USB2.0 Camera
>[    4.122293] usb 1-1.3: Manufacturer: Ricoh Company Ltd.
>[    4.234505] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 26
>[    4.234512] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[    4.234720] [drm:verify_encoder_state] [ENCODER:33:LVDS]
>[    4.234721] [drm:verify_encoder_state] [ENCODER:37:CRT]
>[    4.234724] [drm:verify_encoder_state] [ENCODER:38:HDMI B]
>[    4.234727] [drm:verify_encoder_state] [ENCODER:43:DP B]
>[    4.234729] [drm:verify_encoder_state] [ENCODER:45:HDMI C]
>[    4.234731] [drm:verify_encoder_state] [ENCODER:47:DP C]
>[    4.234734] [drm:intel_connector_verify_state] [CONNECTOR:36:VGA-1]
>[    4.234736] [drm:intel_connector_verify_state] [CONNECTOR:39:HDMI-A-1]
>[    4.234738] [drm:intel_connector_verify_state] [CONNECTOR:44:DP-1]
>[    4.234740] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-2]
>[    4.234741] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-2]
>[    4.234743] [drm:verify_single_dpll_state] PCH DPLL A
>[    4.234747] [drm:verify_single_dpll_state] PCH DPLL B
>[    4.234755] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
>[    4.235305] [drm:intel_enable_pipe] enabling pipe A
>[    4.236111] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x700
>[    4.236113] [drm:gen6_fdi_link_train] FDI train 1 done.
>[    4.236762] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600
>[    4.236763] [drm:gen6_fdi_link_train] FDI train 2 done.
>[    4.236763] [drm:gen6_fdi_link_train] FDI train done.
>[    4.236767] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 1, on? 0) for crtc 26
>[    4.236767] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
>[    4.336878] usb 4-1: new high-speed USB device number 2 using ehci-pci
>[    4.485268] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
>[    4.485273] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    4.485525] hub 4-1:1.0: USB hub found
>[    4.485623] hub 4-1:1.0: 8 ports detected
>[    4.549139] clocksource: Switched to clocksource tsc
>[    4.773008] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
>[    4.837108] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on RC6p off RC6pp off
>[    4.837112] [drm:sandybridge_pcode_write] warning: pcode (write) mailbox access failed: -75
>[    4.837113] [drm:gen6_enable_rps] Failed to set the min frequency
>[    4.884451] usb 4-1.2: New USB device found, idVendor=24ae, idProduct=6000
>[    4.884455] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    4.884458] usb 4-1.2: Product: Rapoo Wireless Audio
>[    4.884461] usb 4-1.2: Manufacturer: Rapoo
>[    4.890223] hidraw: raw HID events driver (C) Jiri Kosina
>[    4.893341] usbcore: registered new interface driver usbhid
>[    4.893342] usbhid: USB HID core driver
>[    4.895434] input: Rapoo Rapoo Wireless Audio as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.3/0003:24AE:6000.0001/input/input7
>[    4.914926] [drm:intel_panel_enable_backlight] pipe A
>[    4.914934] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4648
>[    4.940296] [drm:intel_connector_verify_state] [CONNECTOR:32:LVDS-1]
>[    4.940302] [drm:verify_crtc_state] [CRTC:26:pipe A]
>[    4.940316] [drm:verify_single_dpll_state] PCH DPLL A
>[    4.940330] [drm:drm_fb_helper_hotplug_event] 
>[    4.940331] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1]
>[    4.940343] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1]
>[    4.940347] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes :
>[    4.940349] [drm:drm_mode_debug_printmodeline] Modeline 51:"1920x1080" 60 144200 1920 1968 2040 2116 1080 1083 1088 1137 0x8 0xa
>[    4.940350] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1]
>[    4.940351] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1
>[    4.940354] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    4.940355] [drm:intel_crt_detect] CRT not detected via hotplug
>[    4.940688] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    4.940689] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    4.940909] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    4.940917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    4.940920] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    4.940923] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    4.941657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    4.941657] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    4.941658] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    4.941659] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected
>[    4.941660] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1]
>[    4.941661] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[    4.941991] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.941991] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.942331] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.942332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.942643] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.942643] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.942850] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.942855] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected
>[    4.942859] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1]
>[    4.942862] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[    4.942869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected
>[    4.942871] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[    4.942873] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[    4.943199] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.943200] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.943533] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.943535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.943869] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.943869] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.944230] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.944232] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[    4.944233] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2]
>[    4.944234] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[    4.944236] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected
>[    4.944240] [drm:drm_setup_crtcs] 
>[    4.944241] [drm:drm_enable_connectors] connector 32 enabled? yes
>[    4.944242] [drm:drm_enable_connectors] connector 36 enabled? no
>[    4.944242] [drm:drm_enable_connectors] connector 39 enabled? no
>[    4.944243] [drm:drm_enable_connectors] connector 44 enabled? no
>[    4.944244] [drm:drm_enable_connectors] connector 46 enabled? no
>[    4.944244] [drm:drm_enable_connectors] connector 48 enabled? no
>[    4.944246] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
>[    4.944247] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0
>[    4.944248] [drm:intel_fb_initial_config] connector LVDS-1 on [CRTC:26:pipe A]: 1920x1080
>[    4.944249] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    4.944249] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    4.944250] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    4.944250] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    4.944251] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    4.944252] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    4.953031] hid-generic 0003:24AE:6000.0001: input,hidraw0: USB HID v1.00 Device [Rapoo Rapoo Wireless Audio] on usb-0000:00:1d.0-1.2/input3
>[    4.956861] Console: switching to colour frame buffer device 240x67
>[    4.968850] usb 4-1.3: new full-speed USB device number 4 using ehci-pci
>[    4.994822] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    5.079745] usb 4-1.3: New USB device found, idVendor=24ae, idProduct=2001
>[    5.079776] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    5.079802] usb 4-1.3: Product: RAPOO 5G Wireless Device
>[    5.079832] usb 4-1.3: Manufacturer: RAPOO
>[    5.081352] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:24AE:2001.0002/input/input8
>[    5.141200] hid-generic 0003:24AE:2001.0002: input,hidraw1: USB HID v1.01 Keyboard [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:1d.0-1.3/input0
>[    5.145419] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:24AE:2001.0003/input/input9
>[    5.204984] hid-generic 0003:24AE:2001.0003: input,hiddev0,hidraw2: USB HID v1.01 Mouse [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:1d.0-1.3/input1
>[    5.477286] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[    6.653332] random: crng init done
>[    6.782490] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
>[    7.501748] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
>[    7.503231] systemd[1]: Detected architecture x86-64.
>[    7.579705] systemd[1]: Set hostname to <alexeys-VPCSE1E1E>.
>[   10.954341] systemd[1]: Reached target Encrypted Volumes.
>[   10.957454] systemd[1]: Created slice System Slice.
>[   10.960411] systemd[1]: Listening on Journal Socket.
>[   10.977117] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[   10.980530] systemd[1]: Starting Uncomplicated firewall...
>[   10.983892] systemd[1]: Started Read required files in advance.
>[   10.987236] systemd[1]: Listening on udev Control Socket.
>[   12.540388] systemd[1]: Started Journal Service.
>[   13.495492] lp: driver loaded but no devices found
>[   14.170272] ppdev: user-space parallel port driver
>[   28.375187] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,user_xattr
>[   28.812816] systemd-journald[818]: Received request to flush runtime journal from PID 1
>[   29.297109] audit: type=1305 audit(1473424963.058:2): audit_pid=1227 old=0 auid=4294967295 ses=4294967295 res=1
>[   29.384599] ACPI: AC Adapter [ADP1] (off-line)
>[   29.959815] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255)
>[   29.959821] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   29.959823] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
>[   29.959826] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160422/utaddress-255)
>[   29.959828] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   29.959829] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
>[   29.959831] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160422/utaddress-255)
>[   29.959833] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   29.959834] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
>[   29.959836] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160422/utaddress-255)
>[   29.959838] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   29.959838] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   30.098467] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   30.194788] [drm:asle_set_backlight] bclp = 0x8000004b
>[   30.194791] [drm:asle_set_backlight] updating opregion backlight 75/255
>[   30.194793] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1367
>[   30.233107] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input10
>[   30.233159] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input11
>[   30.239778] sony_laptop: handle 0x014b: keyboard backlight setup already done for 0x0143
>[   30.239779] sony_laptop: couldn't set up keyboard backlight function (-16)
>[   30.241666] sony_laptop: SNC setup done.
>[   30.332610] ACPI: Battery Slot [BAT1] (battery present)
>[   30.332674] ACPI: Battery Slot [BAT2] (battery absent)
>[   30.480060] [drm:asle_set_backlight] bclp = 0x8000005d
>[   30.480062] [drm:asle_set_backlight] updating opregion backlight 93/255
>[   30.480065] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1695
>[   30.481286] Intel(R) Wireless WiFi driver for Linux
>[   30.481287] Copyright(c) 2003- 2015 Intel Corporation
>[   30.481483] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
>[   30.838993] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
>[   30.838994] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
>[   30.838995] RAPL PMU: hw unit of domain package 2^-16 Joules
>[   30.838995] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
>[   30.858984] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[   30.859024] sr 4:0:0:0: Attached scsi generic sg1 type 5
>[   31.149847] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
>[   31.998827] AVX version of gcm_enc/dec engaged.
>[   31.998828] AES CTR mode by8 optimization enabled
>[   32.879847] intel_rapl: Found RAPL domain package
>[   32.879849] intel_rapl: Found RAPL domain core
>[   32.879850] intel_rapl: Found RAPL domain uncore
>[   32.879856] intel_rapl: RAPL package 0 domain package locked by BIOS
>[   33.424974] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
>[   33.424977] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
>[   33.424978] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>[   33.424980] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
>[   33.427076] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>[   33.581919] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[   34.135769] Bluetooth: Core ver 2.21
>[   34.135787] NET: Registered protocol family 31
>[   34.135788] Bluetooth: HCI device and connection manager initialized
>[   34.135792] Bluetooth: HCI socket layer initialized
>[   34.135794] Bluetooth: L2CAP socket layer initialized
>[   34.135801] Bluetooth: SCO socket layer initialized
>[   34.181879] Adding 4106236k swap on /dev/sda6.  Priority:-1 extents:1 across:4106236k FS
>[   34.548895] media: Linux media interface: v0.10
>[   34.884672] Linux video capture interface: v2.00
>[   34.925069] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   34.929793] usbcore: registered new interface driver snd-usb-audio
>[   34.963365] snd_hda_codec_realtek hdaudioC0D0: ALC275: SKU not ready 0x411111f0
>[   34.963589] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC275: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[   34.963592] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   34.963594] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>[   34.963595] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[   34.963596] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[   34.963598] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
>[   35.061136] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[   35.307298] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[   35.308803] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>[   35.309002] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
>[   35.309101] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
>[   35.573737] usbcore: registered new interface driver btusb
>[   35.748984] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05ca:18c0)
>[   35.750765] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!
>[   35.750768] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
>[   35.750770] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
>[   35.750850] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input16
>[   35.750917] usbcore: registered new interface driver uvcvideo
>[   35.750918] USB Video Class driver (1.1.1)
>[   35.833795] [drm:radeon_atif_handler] event, device_class = battery, type = 0x81
>[   35.833964] [drm:radeon_atif_handler] event, device_class = battery, type = 0x80
>[   35.834048] [drm:radeon_atif_handler] event, device_class = battery, type = 0x81
>[   35.834081] [drm:radeon_atif_handler] event, device_class = battery, type = 0x80
>[   36.866184] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   36.866185] Bluetooth: BNEP filters: protocol multicast
>[   36.866189] Bluetooth: BNEP socket layer initialized
>[   39.975765] [drm:i915_gem_open] 
>[   40.284164] [drm:evergreen_pcie_gen2_enable] PCIE gen 2 link speeds already enabled
>[   40.288215] [drm:evergreen_pcie_gart_enable] PCIE GART of 1024M enabled (table at 0x0000000000162000).
>[   40.288307] radeon 0000:01:00.0: WB enabled
>[   40.288309] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff925fcdd1cc00
>[   40.288311] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff925fcdd1cc0c
>[   40.289072] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc10381032118
>[   40.289336] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   40.289337] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   40.289338] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   40.289339] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   40.289340] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   40.289341] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   40.305333] [drm:r600_ring_test] ring test on 0 succeeded in 2 usecs
>[   40.305345] [drm:r600_dma_ring_test] ring test on 3 succeeded in 7 usecs
>[   40.481285] [drm:uvd_v1_0_ring_test] ring test on 5 succeeded in 2 usecs
>[   40.481293] [drm:uvd_v1_0_init] UVD initialized successfully.
>[   40.481378] [drm:r600_ib_test] ib test on ring 0 succeeded in 0 usecs
>[   40.481456] [drm:r600_dma_ib_test] ib test on ring 3 succeeded in 0 usecs
>[   41.156961] [drm:uvd_v1_0_ib_test] ib test on ring 5 succeeded
>[   41.169061] [drm:i915_gem_open] 
>[   41.174912] [drm:i915_gem_open] 
>[   41.191593] [drm:i915_gem_open] 
>[   41.191629] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1]
>[   41.191630] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1]
>[   41.191634] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes :
>[   41.191636] [drm:drm_mode_debug_printmodeline] Modeline 51:"1920x1080" 60 144200 1920 1968 2040 2116 1080 1083 1088 1137 0x8 0xa
>[   41.191642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1]
>[   41.191643] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1
>[   41.191647] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   41.191647] [drm:intel_crt_detect] CRT not detected via hotplug
>[   41.191942] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   41.191945] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   41.192096] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   41.192098] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   41.192099] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   41.192100] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   41.192821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   41.192822] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   41.192823] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   41.192824] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected
>[   41.192828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1]
>[   41.192829] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[   41.192986] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   41.192987] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   41.193142] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   41.193142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   41.193292] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   41.193293] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   41.193442] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   41.193444] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected
>[   41.193447] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1]
>[   41.193448] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[   41.193452] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected
>[   41.193454] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[   41.193455] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[   41.193605] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   41.193606] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   41.193761] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   41.193762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   41.193911] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   41.193912] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   41.194062] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   41.194063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[   41.194065] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2]
>[   41.194066] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[   41.194069] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected
>[   44.443580] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   44.444865] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>[   44.451418] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>[   44.451514] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
>[   44.735999] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>[   44.742570] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>[   44.742666] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
>[   44.827261] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   44.830916] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   45.188865] r8169 0000:05:00.0 eth0: link down
>[   45.188929] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   45.772960] [drm:i915_gem_open] 
>[   46.293050] [drm:i915_gem_open] 
>[   46.335949] [drm:i915_gem_open] 
>[   46.365940] [drm:drm_mode_addfb2] [FB:52]
>[   46.372787] [drm:drm_internal_framebuffer_create] could not create framebuffer
>[   46.372793] [drm:drm_internal_framebuffer_create] could not create framebuffer
>[   46.372804] [drm:drm_mode_addfb2] [FB:52]
>[   46.389668] [drm:i915_gem_open] 
>[   46.389699] [drm:i915_gem_open] 
>[   46.842084] [drm:drm_mode_addfb2] [FB:52]
>[   47.009761] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   47.475880] [drm:drm_mode_setcrtc] [CRTC:26:pipe A]
>[   47.475886] [drm:drm_mode_setcrtc] [CONNECTOR:32:LVDS-1]
>[   47.492786] [drm:drm_mode_setcrtc] [CRTC:34:crtc-0]
>[   47.492789] [drm:drm_crtc_helper_set_config] 
>[   47.492790] [drm:drm_crtc_helper_set_config] [CRTC:34:crtc-0] [NOFB]
>[   47.493021] [drm:drm_mode_setcrtc] [CRTC:36:crtc-1]
>[   47.493022] [drm:drm_crtc_helper_set_config] 
>[   47.493023] [drm:drm_crtc_helper_set_config] [CRTC:36:crtc-1] [NOFB]
>[   47.493125] [drm:drm_mode_setcrtc] [CRTC:38:crtc-2]
>[   47.493126] [drm:drm_crtc_helper_set_config] 
>[   47.493127] [drm:drm_crtc_helper_set_config] [CRTC:38:crtc-2] [NOFB]
>[   47.493228] [drm:drm_mode_setcrtc] [CRTC:40:crtc-3]
>[   47.493229] [drm:drm_crtc_helper_set_config] 
>[   47.493229] [drm:drm_crtc_helper_set_config] [CRTC:40:crtc-3] [NOFB]
>[   47.493331] [drm:drm_mode_setcrtc] [CRTC:42:crtc-4]
>[   47.493332] [drm:drm_crtc_helper_set_config] 
>[   47.493333] [drm:drm_crtc_helper_set_config] [CRTC:42:crtc-4] [NOFB]
>[   47.493434] [drm:drm_mode_setcrtc] [CRTC:44:crtc-5]
>[   47.493435] [drm:drm_crtc_helper_set_config] 
>[   47.493436] [drm:drm_crtc_helper_set_config] [CRTC:44:crtc-5] [NOFB]
>[   48.286793] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   48.389916] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1]
>[   48.389918] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1]
>[   48.389924] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes :
>[   48.389927] [drm:drm_mode_debug_printmodeline] Modeline 51:"1920x1080" 60 144200 1920 1968 2040 2116 1080 1083 1088 1137 0x8 0xa
>[   48.390073] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1]
>[   48.390074] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[   48.390080] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected
>[   48.390085] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2]
>[   48.390086] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[   48.390088] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected
>[   48.390091] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1]
>[   48.390092] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[   48.390547] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   48.390549] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   48.390886] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   48.390889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   48.391114] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   48.391116] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   48.391266] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   48.391269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected
>[   48.391277] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[   48.391279] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[   48.391430] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   48.391431] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   48.391580] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   48.391582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   48.391732] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   48.391733] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   48.391882] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   48.391884] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[   48.391888] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1]
>[   48.391890] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1
>[   48.391894] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   48.391895] [drm:intel_crt_detect] CRT not detected via hotplug
>[   48.392045] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   48.392046] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   48.392201] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   48.392204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   48.392206] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   48.392209] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   48.392939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   48.392942] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   48.392943] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   48.392945] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected
>[   48.432305] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   48.622479] Ebtables v2.0 registered
>[   49.089625] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
>[   49.224123] tun: Universal TUN/TAP device driver, 1.6
>[   49.224126] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[   49.280930] virbr0: port 1(virbr0-nic) entered blocking state
>[   49.280932] virbr0: port 1(virbr0-nic) entered disabled state
>[   49.281015] device virbr0-nic entered promiscuous mode
>[   49.707044] [drm:i915_gem_open] 
>[   49.788823] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
>[   50.346061] wlan0: authenticate with 94:0c:6d:ee:6f:08
>[   50.349380] wlan0: send auth to 94:0c:6d:ee:6f:08 (try 1/3)
>[   50.351772] wlan0: authenticated
>[   50.351871] wlan0: waiting for beacon from 94:0c:6d:ee:6f:08
>[   50.424731] wlan0: associate with 94:0c:6d:ee:6f:08 (try 1/3)
>[   50.428433] wlan0: RX AssocResp from 94:0c:6d:ee:6f:08 (capab=0x431 status=0 aid=3)
>[   50.448500] wlan0: associated
>[   50.448535] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   50.578834] fuse init (API version 7.25)
>[   50.894208] Guest personality initialized and is inactive
>[   50.894453] VMCI host device registered (name=vmci, major=10, minor=57)
>[   50.894454] Initialized host personality
>[   50.951275] NET: Registered protocol family 40
>[   51.038477] virbr0: port 1(virbr0-nic) entered blocking state
>[   51.038481] virbr0: port 1(virbr0-nic) entered listening state
>[   52.459421] virbr0: port 1(virbr0-nic) entered disabled state
>[   54.374918] device virbr0-nic left promiscuous mode
>[   54.374945] virbr0: port 1(virbr0-nic) entered disabled state
>[   60.930376] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   60.930875] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   60.937941] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   60.938376] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   60.959693] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   60.959934] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   60.988958] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   60.989331] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   61.762652] Bluetooth: RFCOMM TTY layer initialized
>[   61.762659] Bluetooth: RFCOMM socket layer initialized
>[   61.762663] Bluetooth: RFCOMM ver 1.11

Actions: View

Attachments on bug 97060: 125278 | 125279 | 126227 | 126228 | 126251 | 126254 | 126255 | 126312 | 126373 | 126415

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.