Attachment 13077 Details for Bug 13615 – dmesg

dmesg

out.log (text/plain), 19.55 KB, created by Colin.Joe on 2007-12-12 18:24:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Colin.Joe

Created: 2007-12-12 18:24:39 UTC

Size: 19.55 KB

patch

obsolete

>Linux version 2.6.22-rc5 (root@x-g965) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 SMP Mon Jun 18 22:05:33 CST 2007
>Command line: ro root=LABEL=/ rhgb 
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f651c00 (usable)
> BIOS-e820: 000000003f651c00 - 000000003f653c00 (ACPI NVS)
> BIOS-e820: 000000003f655c00 - 000000003f657c00 (ACPI data)
> BIOS-e820: 000000003f657c00 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 155) 0 entries of 3200 used
>Entering add_active_range(0, 256, 259665) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FEBF0, 0024 (r2 DELL  )
>ACPI: XSDT 000FD085, 005C (r1 DELL    B8K           14 ASL        61)
>ACPI: FACP 000FD19D, 00F4 (r3 DELL    B8K           14 ASL        61)
>ACPI: DSDT FFFD7B02, 33A4 (r1   DELL    dt_ex     1000 INTL 20050624)
>ACPI: FACS 3F651C00, 0040
>ACPI: SSDT FFFDAFC7, 00AC (r1   DELL    st_ex     1000 INTL 20050624)
>ACPI: APIC 000FD291, 0092 (r1 DELL    B8K           14 ASL        61)
>ACPI: BOOT 000FD323, 0028 (r1 DELL    B8K           14 ASL        61)
>ACPI: MCFG 000FD34B, 003E (r1 DELL    B8K           14 ASL        61)
>ACPI: HPET 000FD389, 0038 (r1 DELL    B8K           14 ASL        61)
>ACPI: SLIC 000FD3C1, 0176 (r1 DELL    B8K           14 ASL        61)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003f651000
>Entering add_active_range(0, 0, 155) 0 entries of 3200 used
>Entering add_active_range(0, 256, 259665) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003f651000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      155
>    0:      256 ->   259665
>On node 0 totalpages: 259564
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1633 pages reserved
>  DMA zone: 2306 pages, LIFO batch:0
>  DMA32 zone: 3494 pages used for memmap
>  DMA32 zone: 252075 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009b000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>SMP: Allowing 8 CPUs, 6 hotplug CPUs
>PERCPU: Allocating 37616 bytes of per cpu data
>Built 1 zonelists.  Total pages: 254381
>Kernel command line: ro root=LABEL=/ rhgb 
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2659.997 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>Memory: 1016004k/1038660k available (3377k kernel code, 22252k reserved, 1890k data, 328k init)
>Calibrating delay using timer specific routine.. 5324.77 BogoMIPS (lpj=10649541)
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 8312451
>Detected 8.312 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5320.23 BogoMIPS (lpj=10640461)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>             Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>migration_cost=497
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: Please test with "acpi_osi=!Linux"
>Please send dmidecode to linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 2.21 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>pnp: 00:01: ioport range 0x800-0x85f has been reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
>pnp: 00:06: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:06: iomem range 0x100000-0xffffff could not be reserved
>pnp: 00:06: iomem range 0x1000000-0x3f651bff could not be reserved
>pnp: 00:06: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:07: ioport range 0x100-0x1fe has been reserved
>pnp: 00:07: ioport range 0x200-0x277 has been reserved
>pnp: 00:07: ioport range 0x280-0x2e7 has been reserved
>pnp: 00:07: ioport range 0x2e8-0x2ef has been reserved
>pnp: 00:07: ioport range 0x2f0-0x2f7 has been reserved
>pnp: 00:07: ioport range 0x2f8-0x2ff has been reserved
>pnp: 00:07: ioport range 0x300-0x377 has been reserved
>pnp: 00:07: ioport range 0x380-0x3bb has been reserved
>pnp: 00:07: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dfc00000-dfcfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: dfb00000-dfbfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 858k freed
>Simple Boot Flag at 0x7a set to 0x80
>Total HugeTLB memory allocated, 0
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>input: Power Button (FF) as /class/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input1
>ACPI: Power Button (CM) [VBTN]
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>loop: module loaded
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:cb:ed:69
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>netconsole: not configured, aborting
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
>megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
>ahci 0000:00:1f.2: version 2.2
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
>ahci 0000:00:1f.2: nr_ports (6) and implemented port map (0x33) don't match
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x33 impl RAID mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc200001d4100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0
>ata2: SATA max UDMA/133 cmd 0xffffc200001d4180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 cmd 0xffffc200001d4300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0
>ata6: SATA max UDMA/133 cmd 0xffffc200001d4380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ata_hpa_resize 1: sectors = 156250000, hpa_sectors = 156250000
>ata1.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
>ata1.00: 156250000 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: ata_hpa_resize 1: sectors = 156250000, hpa_sectors = 156250000
>ata1.00: configured for UDMA/133
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: _NEC DVD+/-RW ND-3650A, 105C, max UDMA/33
>ata2.00: configured for UDMA/33
>ata5: SATA link down (SStatus 4 SControl 300)
>ata6: SATA link down (SStatus 4 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: CD-ROM            _NEC     DVD+-RW ND-3650A 105C PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>Fusion MPT base driver 3.04.04
>Copyright (c) 1999-2007 LSI Logic Corporation
>Fusion MPT SPI Host driver 3.04.04
>Fusion MPT SAS Host driver 3.04.04
>ieee1394: raw1394: /dev/raw1394 device initialized
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdfddac00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 7-2: new low speed USB device using uhci_hcd and address 2
>usb 7-2: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>input: ATEN ATEN  CS-1716/08/04 as /class/input/input2
>input: USB HID v1.10 Keyboard [ATEN ATEN  CS-1716/08/04] on usb-0000:00:1d.2-2
>input: ATEN ATEN  CS-1716/08/04 as /class/input/input3
>input: USB HID v1.10 Mouse [ATEN ATEN  CS-1716/08/04] on usb-0000:00:1d.2-2
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>oprofile: using NMI interrupt.
>TCP cubic registered
>NET: Registered protocol family 1
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>Freeing unused kernel memory: 328k freed
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>agpgart: Detected an Intel 965G Chipset.
>agpgart: intel-agp: IGD detected
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2096472k swap on /dev/sda3.  Priority:-1 extents:1 across:2096472k
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
>e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>i2c /dev entries driver
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.12.0 20070209 on minor 0
>mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
>mtrr: no MTRR for c0000000,10000000 found
>mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining

Actions: View

Attachments on bug 13615: 13056 | 13057 | 13077

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.