Attachment 13308 Details for Bug 13778 – dmesg-output

dmesg-output

nouvea-20071222-dmesg (text/plain), 27.34 KB, created by Peter Hjalmarsson on 2007-12-22 03:59:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter Hjalmarsson

Created: 2007-12-22 03:59:56 UTC

Size: 27.34 KB

patch

obsolete

>Linux version 2.6.23-gentoo-r4 (root@lillen) (gcc version 4.2.2 (Gentoo 4.2.2 p1.0)) #1 SMP PREEMPT Thu Dec 20 20:32:50 CET 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
> BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
> BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>639MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5850
>Entering add_active_range(0, 0, 393200) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   393200
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   393200
>On node 0 totalpages: 393200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 1279 pages used for memmap
>  HighMem zone: 162545 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>ACPI: RSDP 000F7800, 0014 (r0 AOpen )
>ACPI: RSDT 5FFF3000, 002C (r1 AOpen  AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 5FFF3040, 0074 (r1 AOpen  AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 5FFF30C0, 432B (r1 AOPEN  AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 5FFF0000, 0040
>ACPI: APIC 5FFF7400, 0068 (r1 AOpen  AWRDACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 390129
>Kernel command line: real_root=/dev/md2 splash=silent CONSOLE=/dev/tty1 vga=0x31B video=vesafb:mtrr:3,ywrap quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3092.888 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1549180k/1572800k available (2097k kernel code, 22296k reserved, 655k data, 300k init, 655296k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe15000 - 0xfffff000   (1960 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc03b8000 - 0xc0403000   ( 300 kB)
>      .data : 0xc030c6c9 - 0xc03b03bc   ( 655 kB)
>      .text : 0xc0100000 - 0xc030c6c9   (2097 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 6187.87 BogoMIPS (lpj=3093938)
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6184.61 BogoMIPS (lpj=3092305)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>Total of 2 processors activated (12372.48 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>NET: Registered protocol family 16
>EISA bus registered
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbc00, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 4080-40bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of mem resources: 12
>pnpacpi: exceeded the max number of mem resources: 12
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>SCSI subsystem initialized
>libata version 2.21 loaded.
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>pnp: 00:01: ioport range 0xb78-0xb7b has been reserved
>pnp: 00:01: ioport range 0xf78-0xf7b has been reserved
>pnp: 00:01: ioport range 0xa78-0xa7b has been reserved
>pnp: 00:01: ioport range 0xe78-0xe7b has been reserved
>pnp: 00:01: ioport range 0xbbc-0xbbf has been reserved
>pnp: 00:01: ioport range 0xfbc-0xfbf has been reserved
>pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:01: ioport range 0x290-0x297 has been reserved
>pnp: 00:0c: ioport range 0x4000-0x40bf could not be reserved
>pnp: 00:0e: iomem range 0xd0000-0xd3fff has been reserved
>pnp: 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved
>pnp: 00:0e: iomem range 0x5fff0000-0x5fffffff could not be reserved
>pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0e: iomem range 0x100000-0x5ffeffff could not be reserved
>pnp: 00:0e: iomem range 0x0-0x0 could not be reserved
>pnp: 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:0e: iomem range 0xfec01000-0xfed8ffff could not be reserved
>pnp: 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0e: iomem range 0xffb00000-0xffb7ffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f8000000-f9ffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: fa000000-fbffffff
>  PREFETCH window: fc000000-fc0fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 5771k freed
>Machine check exception polling timer started.
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit: initializing netlink socket (disabled)
>audit(1198325456.528:1): initialized
>highmem bounce pool size: 64 pages
>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Firmware left 0000:02:09.0 e100 interrupts enabled, disabling
>Real Time Clock Driver v1.12ac
>intel_rng: FWH not detected
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 865 Chipset.
>agpgart: AGP aperture is 128M @ 0xf0000000
>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 10240k, total 262144k
>vesafb: mode is 1280x1024x32, linelength=5120, pages=0
>vesafb: protected mode interface info at c000:f790
>vesafb: pmi: set display start = c00cf7c6, set palette = c00cf830
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2048
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 160x64
>fbcondecor: console 0 using theme 'default'
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>fbcondecor: switched decor state to 'on' on console 0
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>loop: module loaded
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
>ata1.00: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS11, max UDMA/33
>ata1.00: configured for UDMA/33
>ata2.00: ATA-7: SAMSUNG SP1203N, TL100-23, max UDMA/100
>ata2.00: 234493056 sectors, multi 16: LBA48 
>ata2.00: configured for UDMA/100
>scsi 0:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-W162C TS11 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP1203N  TL10 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 1:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e502 bmdma 0x0001e800 irq 16
>ata4: SATA max UDMA/133 cmd 0x0001e600 ctl 0x0001e702 bmdma 0x0001e808 irq 16
>ata3.00: ATA-6: WDC WD2500JD-22HBB0, 08.02D08, max UDMA/133
>ata3.00: 488397168 sectors, multi 16: LBA48 
>ata3.00: configured for UDMA/133
>ata4.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
>ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500JD-22H 08.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 2:0:0:0: [sdb] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3
>sd 3:0:0:0: [sdc] Attached SCSI disk
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:03 failed with error -16
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>EDAC MC: Ver: 2.1.0 Dec 20 2007
>EISA: Probing bus 0 at eisa.0
>Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
>ALSA device list:
>  No soundcards found.
>TCP cubic registered
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Starting balanced_irq
>Using IPI No-Shortcut mode
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 300k freed
>ata1: soft resetting port
>ata1.00: configured for UDMA/33
>ata1: EH complete
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfc100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e300
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000e100
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000e200
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>usb 5-1: new low speed USB device using uhci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input2
>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input3
>input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input4
>input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>async_tx: api initialized (async)
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  4000.000 MB/sec
>xor: using function: pIII_sse (4000.000 MB/sec)
>raid6: int32x1    757 MB/s
>raid6: int32x2    691 MB/s
>raid6: int32x4    906 MB/s
>raid6: int32x8    652 MB/s
>raid6: mmxx1     2492 MB/s
>raid6: mmxx2     2796 MB/s
>raid6: sse1x1    1484 MB/s
>raid6: sse1x2    2464 MB/s
>raid6: sse2x1    3250 MB/s
>raid6: sse2x2    3078 MB/s
>raid6: using algorithm sse2x1 (3250 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: raid10 personality registered for level 10
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdc3 ...
>md:  adding sdc3 ...
>md: sdc2 has different UUID to sdc3
>md: sdc1 has different UUID to sdc3
>md:  adding sdb3 ...
>md: sdb2 has different UUID to sdc3
>md: sdb1 has different UUID to sdc3
>md: sda1 has different UUID to sdc3
>md: created md2
>md: bind<sdb3>
>md: bind<sdc3>
>md: running: <sdc3><sdb3>
>md2: setting max_sectors to 128, segment boundary to 32767
>raid0: looking at sdc3
>raid0:   comparing sdc3(242147648) with sdc3(242147648)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sdb3
>raid0:   comparing sdb3(242147648) with sdc3(242147648)
>raid0:   EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 484295296 blocks.
>raid0 : conf->hash_spacing is 484295296 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 4 bytes for hash.
>md: considering sdc2 ...
>md:  adding sdc2 ...
>md: sdc1 has different UUID to sdc2
>md:  adding sdb2 ...
>md: sdb1 has different UUID to sdc2
>md: sda1 has different UUID to sdc2
>md: created md3
>md: bind<sdb2>
>md: bind<sdc2>
>md: running: <sdc2><sdb2>
>md3: setting max_sectors to 8192, segment boundary to 2097151
>raid0: looking at sdc2
>raid0:   comparing sdc2(1949696) with sdc2(1949696)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sdb2
>raid0:   comparing sdb2(1949696) with sdc2(1949696)
>raid0:   EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 3899392 blocks.
>raid0 : conf->hash_spacing is 3899392 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 4 bytes for hash.
>md: considering sdc1 ...
>md:  adding sdc1 ...
>md:  adding sdb1 ...
>md:  adding sda1 ...
>md: created md1
>md: bind<sda1>
>md: bind<sdb1>
>md: bind<sdc1>
>md: running: <sdc1><sdb1><sda1>
>raid1: raid set md1 active with 3 out of 3 mirrors
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with journal data mode.
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>input: Power Button (FF) as /devices/virtual/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input6
>ACPI: Power Button (CM) [PWRB]
>ACPI: Thermal Zone [THRM] (42 C)
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 19
>8139too Fast Ethernet driver 0.9.28
>ACPI: Fan [FAN] (on)
>e100: eth0: e100_probe: addr 0xfc000000, irq 19, MAC addr 00:80:5F:D7:68:14
>ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 22 (level, low) -> IRQ 20
>eth1: RealTek RTL8139 at 0xf883e000, 00:01:80:3d:0b:bb, IRQ 20
>eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
>gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0xd300, speed 1125kHz
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 21
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>udev: renamed network interface eth1 to eth0
>udev: renamed network interface eth0_rename to eth1
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50810 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 16
>EXT3 FS on md2, internal journal
>Adding 3899384k swap on /dev/md3.  Priority:1 extents:1 across:3899384k
>w83627hf: Found W83627THF chip at 0x290
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>fbcondecor: console 1 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 1
>fbcondecor: console 0 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 0
>fbcondecor: console 2 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 2
>fbcondecor: console 3 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 3
>fbcondecor: console 4 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 4
>fbcondecor: console 5 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 5
>fbcondecor: console 6 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 6
>fbcondecor: console 7 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 7
>fbcondecor: console 8 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 8
>fbcondecor: console 9 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 9
>fbcondecor: console 10 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 10
>fbcondecor: console 11 using theme 'default'
>fbcondecor: switched decor state to 'on' on console 11
>e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth1: no IPv6 routers present
>vmmon: module license 'unspecified' taints kernel.
>/dev/vmmon[5639]: VMCI: Driver initialized.
>/dev/vmmon[5639]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[5639]: Module vmmon: initialized
>/dev/vmnet: open called by PID 5674 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth1: enabling the bridge
>bridge-eth1: up
>bridge-eth1: already up
>bridge-eth1: attached
>/dev/vmnet: open called by PID 5709 (vmnet-natd)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 5750 (vmnet-netifup)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 5760 (vmnet-netifup)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 5773 (vmnet-dhcpd)
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 5777 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>[drm] Initialized drm 1.1.0 20060810
>PCI: Unable to reserve mem region #2:10000000@e0000000 for device 0000:01:00.0
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
>[drm] Detected an NV30 generation card (0x031200a1)
>[drm] Initialized nouveau 0.0.10 20060213 on minor 0
>[drm] Used old pci detect: framebuffer loaded
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>[drm] Allocating FIFO number 0
>[drm] nouveau_fifo_alloc: initialised FIFO 0
>[drm] Allocating FIFO number 1
>[drm] nouveau_fifo_alloc: initialised FIFO 1
>[drm] PGRAPH_ERROR - nSource: PROTECTION_ERROR, nStatus: INVALID_STATE
>[drm] PGRAPH_ERROR - Ch 1/3 Class 0x0397 Mthd 0x01a4 Data 0x000017c2:0x000017c2
>[drm] PGRAPH_ERROR - nSource: PROTECTION_ERROR, nStatus: INVALID_STATE
>[drm] PGRAPH_ERROR - Ch 1/0 Class 0x0397 Mthd 0x01a4 Data 0x000017c2:0x000017c2
>vmnet8: no IPv6 routers present
>vmnet1: no IPv6 routers present
>[drm] PGRAPH_ERROR - nSource: (unknown bits 0x00400000), nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] PGRAPH_ERROR - Ch 1/0 Class 0x0397 Mthd 0x1808 Data 0x00000000:0x00000000
>[drm] nouveau_fifo_free: freeing fifo 1
>[drm:nouveau_fifo_free] *ERROR* Failed to idle channel 1 before destroy.Prepare for strangeness..
>[drm] nouveau_fifo_free: freeing fifo 0
>[drm:nouveau_fifo_free] *ERROR* Failed to idle channel 0 before destroy.Prepare for strangeness..
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>[drm] Allocating FIFO number 0
>[drm] nouveau_fifo_alloc: initialised FIFO 0
>[drm] Allocating FIFO number 1
>[drm] nouveau_fifo_alloc: initialised FIFO 1
>[drm] PGRAPH_ERROR - nSource: PROTECTION_ERROR, nStatus: INVALID_STATE
>[drm] PGRAPH_ERROR - Ch 1/3 Class 0x0397 Mthd 0x01a4 Data 0x000017c2:0x000017c2
>[drm] PGRAPH_ERROR - nSource: PROTECTION_ERROR, nStatus: INVALID_STATE
>[drm] PGRAPH_ERROR - Ch 1/0 Class 0x0397 Mthd 0x01a4 Data 0x000017c2:0x000017c2

Actions: View

Attachments on bug 13778: 13308 | 13309 | 13310

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.