Attachment 13353 Details for Bug 13807 – Kernel boot log on 2.6.24-rc6 (not working)

Kernel boot log on 2.6.24-rc6 (not working)

2.6.24-rc6-boot.log (text/plain), 35.11 KB, created by Harald Welte on 2007-12-25 02:35:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Harald Welte

Created: 2007-12-25 02:35:44 UTC

Size: 35.11 KB

patch

obsolete

>Linux version 2.6.24-rc6-git20071222 (laforge@radha.de.gnumonks.org) (gcc version 4.2.3 20071123 (prerelease) (Debian 4.2.2-4)) #1 SMP Sat Dec 22 00:18:54 CET 2007
>Command line: pci=nommconf root=/dev/md0 vga=0xf01
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cdd76000 (usable)
> BIOS-e820: 00000000cdd76000 - 00000000cde44000 (ACPI NVS)
> BIOS-e820: 00000000cde44000 - 00000000ceeca000 (usable)
> BIOS-e820: 00000000ceeca000 - 00000000ceecc000 (reserved)
> BIOS-e820: 00000000ceecc000 - 00000000cef77000 (usable)
> BIOS-e820: 00000000cef77000 - 00000000cefce000 (ACPI NVS)
> BIOS-e820: 00000000cefce000 - 00000000cefde000 (usable)
> BIOS-e820: 00000000cefde000 - 00000000cefe5000 (ACPI NVS)
> BIOS-e820: 00000000cefe5000 - 00000000cefe7000 (usable)
> BIOS-e820: 00000000cefe7000 - 00000000ceff2000 (ACPI data)
> BIOS-e820: 00000000ceff2000 - 00000000ceff3000 (usable)
> BIOS-e820: 00000000ceff3000 - 00000000cefff000 (ACPI data)
> BIOS-e820: 00000000cefff000 - 00000000cf000000 (usable)
> BIOS-e820: 00000000cf000000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
>end_pfn_map = 1228800
>DMI 2.4 present.
>ACPI: RSDP 000FE020, 0014 (r0 INTEL )
>ACPI: RSDT CEFFD038, 006C (r1 INTEL  DQ3510J       2DB       1000013)
>ACPI: FACP CEFFC000, 0074 (r1 INTEL  DQ3510J       2DB MSFT  1000013)
>ACPI: DSDT CEFF8000, 3C65 (r1 INTEL  DQ3510J       2DB MSFT  1000013)
>ACPI: FACS CEF83000, 0040
>ACPI: APIC CEFF7000, 0078 (r1 INTEL  DQ3510J       2DB MSFT  1000013)
>ACPI: WDDT CEFF6000, 0040 (r1 INTEL  DQ3510J       2DB MSFT  1000013)
>ACPI: MCFG CEFF5000, 003C (r1 INTEL  DQ3510J       2DB MSFT  1000013)
>ACPI: ASF! CEFF4000, 00A6 (r32 INTEL  DQ3510J       2DB MSFT  1000013)
>ACPI: HPET CEFF3000, 0038 (r1 INTEL  DQ3510J       2DB MSFT  1000013)
>ACPI: DMAR CEFF1000, 0128 (r1 INTEL  DQ3510J       2DB MSFT  1000013)
>ACPI: ASPT CEFF0000, 002C (r1 INTEL  DQ3510J       2DB MSFT  1000013)
>ACPI: SSDT CEFEF000, 0204 (r1 INTEL     CpuPm      2DB MSFT  1000013)
>ACPI: SSDT CEFEE000, 0175 (r1 INTEL   Cpu0Ist      2DB MSFT  1000013)
>ACPI: SSDT CEFED000, 0175 (r1 INTEL   Cpu1Ist      2DB MSFT  1000013)
>ACPI: SSDT CEFEC000, 0175 (r1 INTEL   Cpu2Ist      2DB MSFT  1000013)
>ACPI: SSDT CEFEB000, 0175 (r1 INTEL   Cpu3Ist      2DB MSFT  1000013)
>ACPI: SSDT CEFEA000, 00DD (r1 INTEL   Cpu0Cst      2DB MSFT  1000013)
>ACPI: SSDT CEFE9000, 00DD (r1 INTEL   Cpu1Cst      2DB MSFT  1000013)
>ACPI: SSDT CEFE8000, 00DD (r1 INTEL   Cpu2Cst      2DB MSFT  1000013)
>ACPI: SSDT CEFE7000, 00DD (r1 INTEL   Cpu3Cst      2DB MSFT  1000013)
>ACPI: TCPA CEF77000, 0032 (r2 INTEL  TIANO           2 MSFT  1000013)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000012c000000
>Bootmem setup node 0 0000000000000000-000000012c000000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1228800
>Movable zone start PFN for each node
>early_node_map[9] active PFN ranges
>    0:        0 ->      158
>    0:      256 ->   843126
>    0:   843332 ->   847562
>    0:   847564 ->   847735
>    0:   847822 ->   847838
>    0:   847845 ->   847847
>    0:   847858 ->   847859
>    0:   847871 ->   847872
>    0:  1048576 ->  1228800
>ACPI: PM-Timer IO Port: 0x408
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000cdd76000 - 00000000cde44000
>swsusp: Registered nosave memory region: 00000000ceeca000 - 00000000ceecc000
>swsusp: Registered nosave memory region: 00000000cef77000 - 00000000cefce000
>swsusp: Registered nosave memory region: 00000000cefde000 - 00000000cefe5000
>swsusp: Registered nosave memory region: 00000000cefe7000 - 00000000ceff2000
>swsusp: Registered nosave memory region: 00000000ceff3000 - 00000000cefff000
>swsusp: Registered nosave memory region: 00000000cf000000 - 00000000d0000000
>swsusp: Registered nosave memory region: 00000000d0000000 - 00000000f0000000
>swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f8000000
>swsusp: Registered nosave memory region: 00000000f8000000 - 00000000ffc00000
>swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000
>Allocating PCI resources starting at d2000000 (gap: d0000000:20000000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 30560 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 999252
>Policy zone: Normal
>Kernel command line: pci=nommconf root=/dev/md0 vga=0xf01
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against HPET
>time.c: Detected 2393.999 MHz processor.
>Console: colour VGA+ 80x50
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>------------------------
>| Locking API testsuite:
>----------------------------------------------------------------------------
>                                 | spin |wlock |rlock |mutex | wsem | rsem |
>  --------------------------------------------------------------------------
>                     A-A deadlock:failed|failed|  ok  |failed|failed|failed|
>                 A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
>             A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
>             A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
>         A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
>         A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
>         A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
>                    double unlock:  ok  |  ok  |failed|  ok  |failed|failed|
>                  initialize held:failed|failed|failed|failed|failed|failed|
>                 bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
>  --------------------------------------------------------------------------
>              recursive read-lock:             |  ok  |             |failed|
>           recursive read-lock #2:             |  ok  |             |failed|
>            mixed read-write-lock:             |failed|             |failed|
>            mixed write-read-lock:             |failed|             |failed|
>  --------------------------------------------------------------------------
>     hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
>     soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
>     hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
>     soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
>       sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
>       sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
>         hard-safe-A + irqs-on/12:failed|failed|  ok  |
>         soft-safe-A + irqs-on/12:failed|failed|  ok  |
>         hard-safe-A + irqs-on/21:failed|failed|  ok  |
>         soft-safe-A + irqs-on/21:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
>    hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
>    soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
>      hard-irq lock-inversion/123:failed|failed|  ok  |
>      soft-irq lock-inversion/123:failed|failed|  ok  |
>      hard-irq lock-inversion/132:failed|failed|  ok  |
>      soft-irq lock-inversion/132:failed|failed|  ok  |
>      hard-irq lock-inversion/213:failed|failed|  ok  |
>      soft-irq lock-inversion/213:failed|failed|  ok  |
>      hard-irq lock-inversion/231:failed|failed|  ok  |
>      soft-irq lock-inversion/231:failed|failed|  ok  |
>      hard-irq lock-inversion/312:failed|failed|  ok  |
>      soft-irq lock-inversion/312:failed|failed|  ok  |
>      hard-irq lock-inversion/321:failed|failed|  ok  |
>      soft-irq lock-inversion/321:failed|failed|  ok  |
>      hard-irq read-recursion/123:  ok  |
>      soft-irq read-recursion/123:  ok  |
>      hard-irq read-recursion/132:  ok  |
>      soft-irq read-recursion/132:  ok  |
>      hard-irq read-recursion/213:  ok  |
>      soft-irq read-recursion/213:  ok  |
>      hard-irq read-recursion/231:  ok  |
>      soft-irq read-recursion/231:  ok  |
>      hard-irq read-recursion/312:  ok  |
>      soft-irq read-recursion/312:  ok  |
>      hard-irq read-recursion/321:  ok  |
>      soft-irq read-recursion/321:  ok  |
>--------------------------------------------------------
>142 out of 218 testcases failed, as expected. |
>----------------------------------------------------
>Checking aperture...
>Memory: 3978140k/4915200k available (3848k kernel code, 132552k reserved, 1966k data, 364k init)
>Calibrating delay using timer specific routine.. 4791.37 BogoMIPS (lpj=9582749)
>Security Framework initialized
>Capability LSM initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 610 Objects with 63 Devices 156 Methods 42 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 10 Objects with 0 Devices 4 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 5 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0004) - 5 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0005) - 5 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0006) - 5 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0007) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0008) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0009) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 000A) - 1 Objects with 0 Devices 1 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>Detected 16.624 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/4 APIC 0x2
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4788.03 BogoMIPS (lpj=9576063)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>lockdep: not fixing up alternatives.
>Booting processor 2/4 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4481.70 BogoMIPS (lpj=8963401)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 2/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU2: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>lockdep: not fixing up alternatives.
>Booting processor 3/4 APIC 0x3
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4788.00 BogoMIPS (lpj=9576015)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 3/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU3: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>khelper used greatest stack depth: 6544 bytes left
>net_namespace: 144 bytes
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  8905.000 MB/sec
>xor: using function: generic_sse (8905.000 MB/sec)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>khelper used greatest stack depth: 6016 bytes left
>PCI: Using configuration type 1
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 5 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:............................................................................
>Initialized 36/42 Regions 0/0 Fields 25/25 Buffers 15/35 Packages (653 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.
>Executed 1 _INI methods requiring 0 _STA executions (examined 69 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NET: Registered protocol family 8
>NET: Registered protocol family 20
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:Host address width 36
>DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb00000
>DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb01000
>DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb02000
>DMAR:Device scope device [0000:00:03.01] not found
>DMAR:Device scope device [0000:00:03.01] not found
>DMAR:Device scope device [0000:00:03.02] not found
>DMAR:Device scope device [0000:00:03.02] not found
>DMAR:Device scope device [0000:00:03.03] not found
>DMAR:Device scope device [0000:00:03.03] not found
>DMAR:DRHD (flags: 0x00000001)base: 0x00000000feb03000
>DMAR:RMRR base: 0x00000000000e0000 end: 0x00000000000effff
>DMAR:RMRR base: 0x00000000cf600000 end: 0x00000000cfffffff
>IOMMU: Setting identity map for device 0000:00:02.0 [0xcf600000 - 0xd0000000]
>IOMMU: Setting identity map for device 0000:00:02.1 [0xcf600000 - 0xd0000000]
>IOMMU: Setting identity map for device 0000:00:1d.0 [0xe0000 - 0xf0000]
>IOMMU: Setting identity map for device 0000:00:1d.1 [0xe0000 - 0xf0000]
>IOMMU: Setting identity map for device 0000:00:1d.2 [0xe0000 - 0xf0000]
>IOMMU: Setting identity map for device 0000:00:1d.7 [0xe0000 - 0xf0000]
>IOMMU: Setting identity map for device 0000:00:1a.0 [0xe0000 - 0xf0000]
>IOMMU: Setting identity map for device 0000:00:1a.1 [0xe0000 - 0xf0000]
>IOMMU: Setting identity map for device 0000:00:1a.2 [0xe0000 - 0xf0000]
>IOMMU: Setting identity map for device 0000:00:1a.7 [0xe0000 - 0xf0000]
>IOMMU: Prepare 0-16M unity mapping for LPC
>IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000]
>DMAR:[fault reason 05] PTE Write access is not set
>PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>system 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved
>system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
>system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
>system 00:01: iomem range 0xc0000-0xdffff has been reserved
>system 00:01: iomem range 0xe0000-0xfffff could not be reserved
>system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
>system 00:06: ioport range 0x500-0x53f has been reserved
>system 00:06: ioport range 0x400-0x47f has been reserved
>system 00:06: ioport range 0x680-0x6ff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: 1000-1fff
>  MEM window: e0100000-e01fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: e0000000-e00fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 20
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 18336k freed
>Initializing RT-Tester: OK
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>async_tx: api initialized (async)
>io scheduler noop registered
>io scheduler anticipatory registered (default)
>io scheduler deadline registered
>io scheduler cfq registered
>assign_interrupt_mode Found MSI capability
>sage repeated 4 times
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
>e1000e: Copyright (c) 1999-2007 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:9b:ab:6e
>0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Loading iSCSI transport class v2.0-724.
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425100 irq 374
>ata2: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425180 irq 374
>ata3: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425200 irq 374
>ata4: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425280 irq 374
>ata5: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425300 irq 374
>ata6: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425380 irq 374
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
>ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
>ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: Optiarc DVD RW AD-7191S, 1.00, max UDMA/100
>ata3.00: configured for UDMA/100
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb4 < sdb5 sdb6 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7191S  1.00 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe0425c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0425800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 18, io base 0x000020e0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020c0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 17, io base 0x000020a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb 2-2: new high speed USB device using ehci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>usb 2-3: new high speed USB device using ehci_hcd and address 3
>usb 2-3: configuration #1 chosen from 1 choice
>hub 2-3:1.0: USB hub found
>hub 2-3:1.0: 4 ports detected
>usb 2-4: new high speed USB device using ehci_hcd and address 4
>usb 2-4: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver libusual
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: linear personality registered for level -1
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>md: raid10 personality registered for level 10
>raid6: int64x1   2100 MB/s
>raid6: int64x2   2925 MB/s
>raid6: int64x4   2693 MB/s
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>raid6: int64x8   2134 MB/s
>raid6: sse2x1    3832 MB/s
>raid6: sse2x2    4489 MB/s
>usb 3-1: configuration #1 chosen from 1 choice
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 3 ports detected
>raid6: sse2x4    7197 MB/s
>raid6: using algorithm sse2x4 (7197 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>usb 5-2: new full speed USB device using uhci_hcd and address 2
>usb 5-2: configuration #1 chosen from 1 choice
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 4 ports detected
>usb 2-2.1: new low speed USB device using ehci_hcd and address 5
>usb 2-2.1: configuration #1 chosen from 1 choice
>usb 2-2.2: new low speed USB device using ehci_hcd and address 6
>usb 2-2.2: configuration #1 chosen from 1 choice
>usb 2-3.4: new high speed USB device using ehci_hcd and address 7
>usb 2-3.4: configuration #1 chosen from 1 choice
>hub 2-3.4:1.0: USB hub found
>hub 2-3.4:1.0: 4 ports detected
>usb 3-1.1: new full speed USB device using uhci_hcd and address 3
>usb 3-1.1: configuration #1 chosen from 1 choice
>usb 5-2.1: new full speed USB device using uhci_hcd and address 3
>usb 5-2.1: configuration #1 chosen from 1 choice
>usb 5-2.2: new full speed USB device using uhci_hcd and address 4
>usb 5-2.2: configuration #1 chosen from 1 choice
>usb 5-2.3: new full speed USB device using uhci_hcd and address 5
>usb 5-2.3: configuration #1 chosen from 1 choice
>usb 5-2.4: new full speed USB device using uhci_hcd and address 6
>usb 5-2.4: configuration #1 chosen from 1 choice
>usb 2-3.4.2: new full speed USB device using ehci_hcd and address 8
>usb 2-3.4.2: configuration #1 chosen from 1 choice
>hub 2-3.4.2:1.0: USB hub found
>hub 2-3.4.2:1.0: 4 ports detected
>usb 2-3.4.2.1: new full speed USB device using ehci_hcd and address 9
>usb 2-3.4.2.1: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.1/2-2.1:1.0/input/input0
>input: USB HID v1.00 Keyboard [Darfon USB Combo Keyboard] on usb-0000:00:1d.7-2.1
>input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.1/2-2.1:1.1/input/input1
>input: USB HID v1.00 Device [Darfon USB Combo Keyboard] on usb-0000:00:1d.7-2.1
>input: USB Mouse               as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.2/2-2.2:1.0/input/input2
>input: USB HID v1.10 Mouse [USB Mouse              ] on usb-0000:00:1d.7-2.2
>input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input3
>input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1a.0-1.1
>input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input4
>input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1a.0-1.1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
>Freeing unused kernel memory: 364k freed
>Write protecting the kernel read-only data: 1552k
>busybox used greatest stack depth: 5880 bytes left
>exe used greatest stack depth: 5560 bytes left
>NET: Registered protocol family 1
>exe used greatest stack depth: 5352 bytes left
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI: Processor [CPU3] (supports 8 throttling states)
>modprobe used greatest stack depth: 5064 bytes left
>cdrom_id used greatest stack depth: 4664 bytes left
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sr 2:0:0:0: Attached scsi generic sg2 type 5
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>scsi6 : pata_marvell
>scsi7 : pata_marvell
>ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
>ata8: DUMMY
>BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 
>ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[e0000000-e00007ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
>md: md0 stopped.
>md: bind<sdb6>
>md: bind<sda6>
>raid1: raid set md0 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>sed used greatest stack depth: 3728 bytes left
>check-ptp-camer used greatest stack depth: 3456 bytes left
>Real Time Clock Driver v1.12ac
>agpgart: Detected an Intel Q35 Chipset.
>agpgart: Detected 6140K stolen memory.
>DMAR:[fault reason 05] PTE Write access is not set
>sage repeated 118 times
>agpgart: AGP aperture is 256M @ 0xd0000000
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>input: Power Button (FF) as /devices/virtual/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /devices/virtual/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 18
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
>pl2303 5-2.1:1.0: pl2303 converter detected
>usb 5-2.1: pl2303 converter now attached to ttyUSB0
>pl2303 5-2.2:1.0: pl2303 converter detected
>usb 5-2.2: pl2303 converter now attached to ttyUSB1
>pl2303 5-2.3:1.0: pl2303 converter detected
>usb 5-2.3: pl2303 converter now attached to ttyUSB2
>pl2303 5-2.4:1.0: pl2303 converter detected
>usb 5-2.4: pl2303 converter now attached to ttyUSB3
>usbcore: registered new interface driver pl2303
>drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>ALSA sound/pci/hda/hda_intel.c:727: codec_mask = 0x4
>hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>Adding 15631204k swap on /dev/sda5.  Priority:-1 extents:1 across:15631204k
>EXT3 FS on md0, internal journal
>coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.2: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.3: Using undocumented features, absolute temperature might be wrong!
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NET: Registered protocol family 17
>0000:00:19.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>lp: driver loaded but no devices found
>ppdev: user-space parallel port driver
>]: restarted
>DMAR:[fault reason 05] PTE Write access is not set
>sage repeated 375 times
>

Actions: View

Attachments on bug 13807: 13339 | 13340 | 13341 | 13342 | 13343 | 13344 | 13345 | 13351 | 13352 | 13353

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.