Attachment 135792 Details for Bug 103779 – kernel dmesg with patch - second update

kernel dmesg with patch - second update

dmesg_dirty (text/plain), 92.74 KB, created by Tomasz Kazimierczak on 2017-11-29 11:52:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tomasz Kazimierczak

Created: 2017-11-29 11:52:58 UTC

Size: 92.74 KB

patch

obsolete

>[    0.000000] Linux version 4.14.0sims1-g06718a287f28-dirty (tkazimierczak@stretch64poligon) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #2 SMP Wed Nov 15 17:09:29 CET 2017
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0sims1-g06718a287f28-dirty root=UUID=9293316a-c68c-446a-8482-55da58c06e16 ro drm.debug=0xe log_bug_len=1M video=HDMI-A-1:1600x900e
>[    0.000000] x86/fpu: x87 FPU will use FXSAVE
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000793b5fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000793b6000-0x00000000793e5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000793e6000-0x00000000793f5fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000793f6000-0x00000000798ddfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000798de000-0x0000000079b63fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000079b64000-0x0000000079baefff] type 20
>[    0.000000] BIOS-e820: [mem 0x0000000079baf000-0x0000000079baffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000079bb0000-0x0000000079bf1fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000079bf2000-0x0000000079d62fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000079d63000-0x0000000079ff9fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000079ffa000-0x0000000079ffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.31 by American Megatrends
>[    0.000000] efi:  ACPI=0x793ed000  ACPI 2.0=0x793ed000  ESRT=0x79b60018  SMBIOS=0xf0560  MPS=0xfd5f0 
>[    0.000000] random: fast init done
>[    0.000000] SMBIOS 2.8 present.
>[    0.000000] DMI: AAEON GENE-BT05/GENE-BT05, BIOS V012NM10 07/20/2015
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 07A800000 mask FFF800000 uncachable
>[    0.000000]   2 base 07B000000 mask FFF000000 uncachable
>[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffffffffff240810]
>[    0.000000] esrt: Reserving ESRT space from 0x0000000079b60018 to 0x0000000079b60050.
>[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>[    0.000000] BRK [0x01a8c000, 0x01a8cfff] PGTABLE
>[    0.000000] BRK [0x01a8d000, 0x01a8dfff] PGTABLE
>[    0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE
>[    0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE
>[    0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE
>[    0.000000] BRK [0x01a91000, 0x01a91fff] PGTABLE
>[    0.000000] Secure boot could not be determined
>[    0.000000] RAMDISK: [mem 0x371b5000-0x378d1fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000793ED000 000024 (v02 ALASKA)
>[    0.000000] ACPI: XSDT 0x00000000793ED080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000793F4F30 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170728/tbfadt-603)
>[    0.000000] ACPI: DSDT 0x00000000793ED188 007DA5 (v02 ALASKA A M I    01072009 INTL 20120913)
>[    0.000000] ACPI: FACS 0x00000000798DDF80 000040
>[    0.000000] ACPI: APIC 0x00000000793F5040 000068 (v03 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x00000000793F50A8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: LPIT 0x00000000793F50F0 000104 (v01 ALASKA A M I    00000003 VLV2 0100000D)
>[    0.000000] ACPI: MCFG 0x00000000793F51F8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
>[    0.000000] ACPI: HPET 0x00000000793F5238 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
>[    0.000000] ACPI: SSDT 0x00000000793F5270 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000793F59D8 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000793F5C68 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
>[    0.000000] ACPI: UEFI 0x00000000793F5DE8 000042 (v01 ALASKA A M I    00000000      00000000)
>[    0.000000] ACPI: CSRT 0x00000000793F5E30 00014C (v00 INTEL  EDK2     00000005 INTL 20120624)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000079ffffff]
>[    0.000000]   Normal   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000003efff]
>[    0.000000]   node   0: [mem 0x0000000000040000-0x000000000009ffff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001effffff]
>[    0.000000]   node   0: [mem 0x000000001f100000-0x000000001fffffff]
>[    0.000000]   node   0: [mem 0x0000000020100000-0x00000000793b5fff]
>[    0.000000]   node   0: [mem 0x0000000079baf000-0x0000000079baffff]
>[    0.000000]   node   0: [mem 0x0000000079bf2000-0x0000000079d62fff]
>[    0.000000]   node   0: [mem 0x0000000079ffa000-0x0000000079ffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff]
>[    0.000000] On node 0 totalpages: 496332
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7744 pages used for memmap
>[    0.000000]   DMA32 zone: 492334 pages, LIFO batch:31
>[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
>[    0.000000] Reserving Intel graphics memory at 0x000000007b000000-0x000000007effffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x793b6000-0x793e5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x793e6000-0x793f5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x793f6000-0x798ddfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x798de000-0x79b63fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79b64000-0x79baefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79bb0000-0x79bf1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79d63000-0x79ff9fff]
>[    0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] percpu: Embedded 36 pages/cpu @ffff880076400000 s107032 r8192 d32232 u1048576
>[    0.000000] pcpu-alloc: s107032 r8192 d32232 u1048576 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 488498
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0sims1-g06718a287f28-dirty root=UUID=9293316a-c68c-446a-8482-55da58c06e16 ro drm.debug=0xe log_bug_len=1M video=HDMI-A-1:1600x900e
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.000000] Memory: 1886448K/1985328K available (5390K kernel code, 919K rwdata, 1864K rodata, 1152K init, 452K bss, 98880K reserved, 0K cma-reserved)
>[    0.000000] ftrace: allocating 23818 entries in 94 pages
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>[    0.000000] NR_IRQS: 4352, nr_irqs: 512, preallocated irqs: 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.004000] tsc: Detected 1333.000 MHz processor
>[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.00 BogoMIPS (lpj=5332000)
>[    0.004000] pid_max: default: 32768 minimum: 301
>[    0.004000] ACPI: Core revision 20170728
>[    0.019943] ACPI: 4 ACPI AML tables successfully acquired and loaded
>[    0.021143] Security Framework initialized
>[    0.021201] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.021222] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.021673] CPU: Physical Processor ID: 0
>[    0.021685] CPU: Processor Core ID: 0
>[    0.021695] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.021702] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.021723] mce: CPU supports 6 MCE banks
>[    0.021738] CPU0: Thermal monitoring enabled (TM1)
>[    0.021749] process: using mwait in idle threads
>[    0.021760] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
>[    0.021767] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
>[    0.022018] Freeing SMP alternatives memory: 24K
>[    0.026664] smpboot: Max logical packages: 1
>[    0.027427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.067148] TSC deadline timer enabled
>[    0.067152] smpboot: CPU0: Intel(R) Atom(TM) CPU  E3825  @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x9)
>[    0.067407] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
>[    0.067447] ... version:                3
>[    0.067454] ... bit width:              40
>[    0.067460] ... generic registers:      2
>[    0.067466] ... value mask:             000000ffffffffff
>[    0.067472] ... max period:             0000007fffffffff
>[    0.067479] ... fixed-purpose events:   3
>[    0.067485] ... event mask:             0000000700000003
>[    0.067599] Hierarchical SRCU implementation.
>[    0.068000] smp: Bringing up secondary CPUs ...
>[    0.068000] x86: Booting SMP configuration:
>[    0.068000] .... node  #0, CPUs:      #1
>[    0.068000] smp: Brought up 1 node, 2 CPUs
>[    0.068000] smpboot: Total of 2 processors activated (5332.00 BogoMIPS)
>[    0.068000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.068000] devtmpfs: initialized
>[    0.068000] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes)
>[    0.068000] PM: Registering ACPI NVS region [mem 0x793f6000-0x798ddfff] (5144576 bytes)
>[    0.068000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.068000] futex hash table entries: 512 (order: 3, 32768 bytes)
>[    0.068000] pinctrl core: initialized pinctrl subsystem
>[    0.068315] NET: Registered protocol family 16
>[    0.068781] cpuidle: using governor ladder
>[    0.068805] cpuidle: using governor menu
>[    0.068906] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.068919] ACPI: bus type PCI registered
>[    0.069067] PCI: Using configuration type 1 for base access
>[    0.069694] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.069694] ACPI: Added _OSI(Module Device)
>[    0.069694] ACPI: Added _OSI(Processor Device)
>[    0.069694] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.069694] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.084389] ACPI: Dynamic OEM Table Load:
>[    0.084417] ACPI: SSDT 0xFFFF880076341C00 0002F6 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
>[    0.085053] ACPI: Dynamic OEM Table Load:
>[    0.085074] ACPI: SSDT 0xFFFF8800761F5800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
>[    0.086477] ACPI: Dynamic OEM Table Load:
>[    0.086498] ACPI: SSDT 0xFFFF880076101E00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
>[    0.087082] ACPI: Dynamic OEM Table Load:
>[    0.087101] ACPI: SSDT 0xFFFF880076352900 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
>[    0.089351] ACPI: Interpreter enabled
>[    0.089418] ACPI: (supports S0 S3 S4 S5)
>[    0.089427] ACPI: Using IOAPIC for interrupt routing
>[    0.089527] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.090583] ACPI: Enabled 9 GPEs in block 00 to 3F
>[    0.526945] ACPI: Power Resource [USBC] (on)
>[    0.530426] ACPI: Power Resource [PLPE] (on)
>[    0.531141] ACPI: Power Resource [PLPE] (on)
>[    0.533863] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.533886] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
>[    0.534531] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
>[    0.535296] PCI host bridge to bus 0000:00
>[    0.535310] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
>[    0.535321] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
>[    0.535331] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
>[    0.535341] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.535352] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.535363] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
>[    0.535374] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
>[    0.535385] pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0822ffe window]
>[    0.535396] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.535419] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
>[    0.535727] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
>[    0.535748] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
>[    0.535764] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
>[    0.535778] pci 0000:00:02.0: reg 0x20: [io  0xe080-0xe087]
>[    0.535806] pci 0000:00:02.0: BAR 2: assigned to efifb
>[    0.536102] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501
>[    0.536129] pci 0000:00:12.0: reg 0x10: [mem 0xd0822000-0xd0822fff]
>[    0.536143] pci 0000:00:12.0: reg 0x14: [mem 0xd0821000-0xd0821fff]
>[    0.536228] pci 0000:00:12.0: PME# supported from D0 D3hot
>[    0.536484] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
>[    0.536512] pci 0000:00:13.0: reg 0x10: [io  0xe070-0xe077]
>[    0.536524] pci 0000:00:13.0: reg 0x14: [io  0xe060-0xe063]
>[    0.536536] pci 0000:00:13.0: reg 0x18: [io  0xe050-0xe057]
>[    0.536548] pci 0000:00:13.0: reg 0x1c: [io  0xe040-0xe043]
>[    0.536560] pci 0000:00:13.0: reg 0x20: [io  0xe020-0xe03f]
>[    0.536573] pci 0000:00:13.0: reg 0x24: [mem 0xd0820000-0xd08207ff]
>[    0.536633] pci 0000:00:13.0: PME# supported from D3hot
>[    0.536887] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
>[    0.536915] pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit]
>[    0.536992] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.537257] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
>[    0.537292] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
>[    0.537309] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
>[    0.537428] pci 0000:00:1a.0: PME# supported from D0 D3hot
>[    0.537728] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
>[    0.537761] pci 0000:00:1b.0: reg 0x10: [mem 0xd0814000-0xd0817fff 64bit]
>[    0.537851] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.538106] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
>[    0.538189] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.538449] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
>[    0.538532] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.538793] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
>[    0.538875] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.539135] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
>[    0.539218] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.539487] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
>[    0.539830] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
>[    0.539879] pci 0000:00:1f.3: reg 0x10: [mem 0xd081c000-0xd081c01f]
>[    0.539957] pci 0000:00:1f.3: reg 0x20: [io  0xe000-0xe01f]
>[    0.540430] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000
>[    0.540473] pci 0000:01:00.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
>[    0.540515] pci 0000:01:00.0: reg 0x18: [io  0xd000-0xd01f]
>[    0.540533] pci 0000:01:00.0: reg 0x1c: [mem 0xd0720000-0xd0723fff]
>[    0.540682] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>[    0.552045] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.552062] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
>[    0.552068] pci 0000:00:1c.0:   bridge window [mem 0xd0700000-0xd07fffff]
>[    0.552214] pci 0000:02:00.0: [8086:1539] type 00 class 0x020000
>[    0.552257] pci 0000:02:00.0: reg 0x10: [mem 0xd0600000-0xd061ffff]
>[    0.552299] pci 0000:02:00.0: reg 0x18: [io  0xc000-0xc01f]
>[    0.552317] pci 0000:02:00.0: reg 0x1c: [mem 0xd0620000-0xd0623fff]
>[    0.552466] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.564039] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.564054] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
>[    0.564060] pci 0000:00:1c.1:   bridge window [mem 0xd0600000-0xd06fffff]
>[    0.564165] pci 0000:00:1c.2: PCI bridge to [bus 03]
>[    0.564274] pci 0000:00:1c.3: PCI bridge to [bus 04]
>[    0.564315] pci_bus 0000:00: on NUMA node 0
>[    0.772778] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.773006] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.773228] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.773448] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.773670] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.773891] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.774111] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.774337] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.775241] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.775241] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.775241] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.775241] vgaarb: loaded
>[    0.775241] Registered efivars operations
>[    0.788854] PCI: Using ACPI for IRQ routing
>[    0.788866] PCI: pci_cache_line_size set to 64 bytes
>[    0.788886] pci 0000:00:12.0: can't claim BAR 0 [mem 0xd0822000-0xd0822fff]: no compatible bridge window
>[    0.788993] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
>[    0.788997] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
>[    0.789000] e820: reserve RAM buffer [mem 0x793b6000-0x7bffffff]
>[    0.789004] e820: reserve RAM buffer [mem 0x79bb0000-0x7bffffff]
>[    0.789007] e820: reserve RAM buffer [mem 0x79d63000-0x7bffffff]
>[    0.789010] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
>[    0.789316] clocksource: Switched to clocksource refined-jiffies
>[    0.813639] pnp: PnP ACPI init
>[    0.813783] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.814139] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.814155] system 00:01: [io  0x0400-0x047f] has been reserved
>[    0.814166] system 00:01: [io  0x0500-0x05fe] has been reserved
>[    0.814176] system 00:01: [io  0x0600-0x061f] has been reserved
>[    0.814197] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.814701] system 00:02: [io  0x0a00-0x0a0f] has been reserved
>[    0.814715] system 00:02: [io  0x0a10-0x0a1f] has been reserved
>[    0.814726] system 00:02: [io  0x0a20-0x0a2f] has been reserved
>[    0.814746] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.814863] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.815018] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
>[    0.815905] pnp 00:05: [dma 3]
>[    0.816238] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
>[    0.816871] pnp 00:06: [dma 0 disabled]
>[    0.817007] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.817643] pnp 00:07: [dma 0 disabled]
>[    0.817769] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.818383] pnp 00:08: [dma 0 disabled]
>[    0.818511] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.819123] pnp 00:09: [dma 0 disabled]
>[    0.819247] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
>[    1.024691] system 00:0a: [mem 0xe0000000-0xefffffff] could not be reserved
>[    1.024709] system 00:0a: [mem 0xfed01000-0xfed01fff] has been reserved
>[    1.024720] system 00:0a: [mem 0xfed03000-0xfed03fff] has been reserved
>[    1.024731] system 00:0a: [mem 0xfed04000-0xfed04fff] has been reserved
>[    1.024742] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
>[    1.024755] system 00:0a: [mem 0xfed1c000-0xfed1cfff] has been reserved
>[    1.024767] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    1.024778] system 00:0a: [mem 0xfef00000-0xfeffffff] has been reserved
>[    1.024800] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.025423] pnp: PnP ACPI: found 11 devices
>[    1.034364] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    1.034406] clocksource: Switched to clocksource acpi_pm
>[    1.034465] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
>[    1.034480] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
>[    1.034492] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
>[    1.034498] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
>[    1.034503] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
>[    1.034514] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
>[    1.034520] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
>[    1.034525] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
>[    1.034561] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
>[    1.034584] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
>[    1.034599] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80400000-0x805fffff]
>[    1.034618] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
>[    1.034632] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80800000-0x809fffff]
>[    1.034651] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80a00000-0x80bfffff 64bit pref]
>[    1.034665] pci 0000:00:12.0: BAR 0: assigned [mem 0x80c00000-0x80c00fff]
>[    1.034683] pci 0000:00:1c.2: BAR 13: assigned [io  0x1000-0x1fff]
>[    1.034695] pci 0000:00:1c.3: BAR 13: assigned [io  0x2000-0x2fff]
>[    1.034711] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    1.034722] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
>[    1.034734] pci 0000:00:1c.0:   bridge window [mem 0xd0700000-0xd07fffff]
>[    1.034746] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
>[    1.034761] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    1.034771] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
>[    1.034783] pci 0000:00:1c.1:   bridge window [mem 0xd0600000-0xd06fffff]
>[    1.034795] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
>[    1.034809] pci 0000:00:1c.2: PCI bridge to [bus 03]
>[    1.034819] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
>[    1.034831] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff]
>[    1.034843] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
>[    1.034857] pci 0000:00:1c.3: PCI bridge to [bus 04]
>[    1.034867] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
>[    1.034879] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff]
>[    1.034890] pci 0000:00:1c.3:   bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
>[    1.034906] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
>[    1.034911] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
>[    1.034915] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
>[    1.034919] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
>[    1.034923] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
>[    1.034926] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
>[    1.034930] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
>[    1.034934] pci_bus 0000:00: resource 11 [mem 0x80000000-0xd0822ffe window]
>[    1.034939] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>[    1.034942] pci_bus 0000:01: resource 1 [mem 0xd0700000-0xd07fffff]
>[    1.034946] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
>[    1.034950] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
>[    1.034954] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff]
>[    1.034958] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
>[    1.034962] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
>[    1.034965] pci_bus 0000:03: resource 1 [mem 0x80400000-0x805fffff]
>[    1.034969] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
>[    1.034973] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
>[    1.034977] pci_bus 0000:04: resource 1 [mem 0x80800000-0x809fffff]
>[    1.034981] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref]
>[    1.035281] NET: Registered protocol family 2
>[    1.035629] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>[    1.035712] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
>[    1.035833] TCP: Hash tables configured (established 16384 bind 16384)
>[    1.035935] UDP hash table entries: 1024 (order: 3, 32768 bytes)
>[    1.035971] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>[    1.035971] NET: Registered protocol family 1
>[    1.035971] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    1.035971] PCI: CLS 64 bytes, default 64
>[    1.035971] Unpacking initramfs...
>[    1.328638] Freeing initrd memory: 7284K
>[    1.328822] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1336e3dbd1a, max_idle_ns: 440795236868 ns
>[    1.328882] clocksource: Switched to clocksource tsc
>[    1.329572] audit: initializing netlink subsys (disabled)
>[    1.329707] audit: type=2000 audit(1511952194.328:1): state=initialized audit_enabled=0 res=1
>[    1.330222] workingset: timestamp_bits=46 max_order=19 bucket_order=0
>[    1.331638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>[    1.331727] io scheduler noop registered
>[    1.331736] io scheduler deadline registered
>[    1.331781] io scheduler cfq registered (default)
>[    1.331790] io scheduler mq-deadline registered
>[    1.331797] io scheduler kyber registered
>[    1.333035] intel_idle: MWAIT substates: 0x3000020
>[    1.333039] intel_idle: v0.4.1 model 0x37
>[    1.333210] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    1.336972] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.357897] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.379255] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
>[    1.400610] 00:08: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 16550A
>[    1.422831] 00:09: ttyS3 at I/O 0x2e8 (irq = 10, base_baud = 115200) is a 16550A
>[    1.425516] hpet: number irqs doesn't agree with number of timers
>[    1.427221] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.427699] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.427721] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.427930] rtc_cmos 00:00: RTC can wake from S4
>[    1.429316] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
>[    1.429394] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
>[    1.429449] IR NEC protocol handler initialized
>[    1.429457] IR RC5(x/sz) protocol handler initialized
>[    1.429463] IR RC6 protocol handler initialized
>[    1.429469] IR JVC protocol handler initialized
>[    1.429475] IR Sony protocol handler initialized
>[    1.429481] IR SANYO protocol handler initialized
>[    1.429488] IR Sharp protocol handler initialized
>[    1.429494] IR MCE Keyboard/mouse protocol handler initialized
>[    1.429500] IR XMP protocol handler initialized
>[    1.429512] intel_pstate: Intel P-state driver initializing
>[    1.432214] NET: Registered protocol family 10
>[    1.433927] Segment Routing with IPv6
>[    1.434024] mip6: Mobile IPv6
>[    1.434048] NET: Registered protocol family 17
>[    1.435860] microcode: sig=0x30679, pf=0x1, revision=0x903
>[    1.436720] microcode: Microcode Update Driver: v2.2.
>[    1.436775] sched_clock: Marking stable (1436666413, 0)->(1439117818, -2451405)
>[    1.438602] registered taskstats version 1
>[    1.439947] rtc_cmos 00:00: setting system clock to 2017-11-29 10:43:14 UTC (1511952194)
>[    1.454762] Freeing unused kernel memory: 1152K
>[    1.454779] Write protecting the kernel read-only data: 8192k
>[    1.456005] Freeing unused kernel memory: 740K
>[    1.457809] Freeing unused kernel memory: 184K
>[    1.660601] SCSI subsystem initialized
>[    1.663825] libata version 3.00 loaded.
>[    1.665748] ahci 0000:00:13.0: version 3.0
>[    1.665998] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
>[    1.666949] ACPI: bus type USB registered
>[    1.667041] usbcore: registered new interface driver usbfs
>[    1.667090] usbcore: registered new interface driver hub
>[    1.667193] usbcore: registered new device driver usb
>[    1.668490] pps_core: LinuxPPS API ver. 1 registered
>[    1.668504] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    1.669218] PTP clock support registered
>[    1.670640] dca service started, version 1.12.1
>[    1.674828] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
>[    1.674844] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.676214] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x2 impl SATA mode
>[    1.676233] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso 
>[    1.682125] scsi host0: ahci
>[    1.689747] scsi host1: ahci
>[    1.689900] ata1: DUMMY
>[    1.689912] ata2: SATA max UDMA/133 abar m2048@0xd0820000 port 0xd0820180 irq 87
>[    1.690403] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.690433] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.711241] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    1.711267] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.713693] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.713712] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.713723] usb usb1: Product: xHCI Host Controller
>[    1.713732] usb usb1: Manufacturer: Linux 4.14.0sims1-g06718a287f28-dirty xhci-hcd
>[    1.713742] usb usb1: SerialNumber: 0000:00:14.0
>[    1.716230] hub 1-0:1.0: USB hub found
>[    1.716839] hub 1-0:1.0: 6 ports detected
>[    1.723067] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.723091] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.725305] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.725323] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.725334] usb usb2: Product: xHCI Host Controller
>[    1.725342] usb usb2: Manufacturer: Linux 4.14.0sims1-g06718a287f28-dirty xhci-hcd
>[    1.725352] usb usb2: SerialNumber: 0000:00:14.0
>[    1.726237] hub 2-0:1.0: USB hub found
>[    1.728240] hub 2-0:1.0: 1 port detected
>[    1.730329] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    1.939557] pps pps0: new PPS source ptp0
>[    1.939593] igb 0000:01:00.0: added PHC on eth0
>[    1.939615] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
>[    1.939640] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:07:32:32:8b:20
>[    1.939666] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
>[    1.939688] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
>[    2.009396] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.009638] ata2.00: ATA-10: 8GB SATA Flash Drive, SFPS918A, max UDMA/133
>[    2.009667] ata2.00: 15649200 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    2.010259] ata2.00: configured for UDMA/133
>[    2.011033] scsi 1:0:0:0: Direct-Access     ATA      8GB SATA Flash D 918A PQ: 0 ANSI: 5
>[    2.018620] sd 1:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
>[    2.018674] sd 1:0:0:0: [sda] Write Protect is off
>[    2.018687] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.018756] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.022474]  sda: sda1 sda2 sda3
>[    2.023501] sd 1:0:0:0: [sda] Attached SCSI disk
>[    2.056057] usb 1-4: new high-speed USB device number 2 using xhci_hcd
>[    2.204682] usb 1-4: New USB device found, idVendor=0424, idProduct=2514
>[    2.204718] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.206736] hub 1-4:1.0: USB hub found
>[    2.206835] hub 1-4:1.0: 4 ports detected
>[    2.217837] pps pps1: new PPS source ptp1
>[    2.217873] igb 0000:02:00.0: added PHC on eth1
>[    2.217894] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
>[    2.217920] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:07:32:32:8b:21
>[    2.217945] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
>[    2.217967] igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
>[    2.221416] igb 0000:02:00.0 enp2s0: renamed from eth1
>[    2.241434] igb 0000:01:00.0 enp1s0: renamed from eth0
>[    2.396443] raid6: sse2x1   gen()   571 MB/s
>[    2.464434] raid6: sse2x1   xor()  1348 MB/s
>[    2.492527] usb 1-4.2: new high-speed USB device number 3 using xhci_hcd
>[    2.532464] raid6: sse2x2   gen()   852 MB/s
>[    2.592869] usb 1-4.2: New USB device found, idVendor=1a40, idProduct=0201
>[    2.592907] usb 1-4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    2.592934] usb 1-4.2: Product: USB 2.0 Hub [MTT]
>[    2.593865] hub 1-4.2:1.0: USB hub found
>[    2.593962] hub 1-4.2:1.0: 7 ports detected
>[    2.600030] raid6: sse2x2   xor()  1591 MB/s
>[    2.668444] raid6: sse2x4   gen()  1361 MB/s
>[    2.672550] usb 1-4.4: new full-speed USB device number 4 using xhci_hcd
>[    2.736396] raid6: sse2x4   xor()  1759 MB/s
>[    2.736405] raid6: using algorithm sse2x4 gen() 1361 MB/s
>[    2.736412] raid6: .... xor() 1759 MB/s, rmw enabled
>[    2.736419] raid6: using ssse3x2 recovery algorithm
>[    2.744672] xor: measuring software checksum speed
>[    2.776183] usb 1-4.4: New USB device found, idVendor=14e1, idProduct=6000
>[    2.776221] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.776248] usb 1-4.4: Product: PenMount USB
>[    2.776268] usb 1-4.4: Manufacturer: DIALOGUE INC
>[    2.784013]    prefetch64-sse:  4170.000 MB/sec
>[    2.791011] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.795182] usbcore: registered new interface driver usbhid
>[    2.795197] usbhid: USB HID core driver
>[    2.797562] input: DIALOGUE INC PenMount USB as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:14E1:6000.0001/input/input0
>[    2.797899] hid-penmount 0003:14E1:6000.0001: input,hidraw0: USB HID v1.01 Mouse [DIALOGUE INC PenMount USB] on usb-0000:00:14.0-4.4/input0
>[    2.824384]    generic_sse:  3784.000 MB/sec
>[    2.824393] xor: using function: prefetch64-sse (4170.000 MB/sec)
>[    2.839662] Btrfs loaded, crc32c=crc32c-intel
>[    2.880314] usb 1-4.2.3: new low-speed USB device number 5 using xhci_hcd
>[    2.973003] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
>[    2.975390] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    2.985989] usb 1-4.2.3: New USB device found, idVendor=046d, idProduct=c31c
>[    2.986008] usb 1-4.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.986018] usb 1-4.2.3: Product: USB Keyboard
>[    2.986026] usb 1-4.2.3: Manufacturer: Logitech
>[    3.080121] usb 1-4.2.4: new full-speed USB device number 6 using xhci_hcd
>[    3.166033] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    3.188091] usb 1-4.2.4: New USB device found, idVendor=096e, idProduct=0807
>[    3.188117] usb 1-4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.188136] usb 1-4.2.4: Product: USB Token
>[    3.188149] usb 1-4.2.4: Manufacturer: FS
>[    3.222652] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>[    3.223046] systemd[1]: Detected architecture x86-64.
>[    3.225173] systemd[1]: Set hostname to <panel-warszawa1-238>.
>[    3.380921] systemd[1]: Listening on fsck to fsckd communication Socket.
>[    3.381463] systemd[1]: Listening on Network Service Netlink Socket.
>[    3.381805] systemd[1]: Listening on Journal Audit Socket.
>[    3.382087] systemd[1]: Listening on Journal Socket (/dev/log).
>[    3.382364] systemd[1]: Listening on Journal Socket.
>[    3.382610] systemd[1]: Listening on udev Kernel Socket.
>[    3.384958] systemd[1]: Created slice User and Session Slice.
>[    3.469840] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
>[    3.471187] f71882fg: Found f81866a chip at 0xa20, revision 32
>[    3.471418] f71882fg f71882fg.2592: Fan: 1 is in duty-cycle mode
>[    3.471465] f71882fg f71882fg.2592: Fan: 2 is in duty-cycle mode
>[    3.471510] f71882fg f71882fg.2592: Fan: 3 is in duty-cycle mode
>[    3.471541] f71882fg f71882fg.2592: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    3.590721] loop: module loaded
>[    3.618607] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>[    3.740957] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[    3.767415] systemd-journald[155]: Received request to flush runtime journal from PID 1
>[    3.836207] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    3.836264] ACPI: Power Button [PWRB]
>[    3.836407] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>[    3.836438] ACPI: Sleep Button [SLPB]
>[    3.836590] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[    3.836629] ACPI: Power Button [PWRF]
>[    4.010138] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    4.043530] EFI Variables Facility v0.08 2004-May-17
>[    4.076153] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.0/0003:046D:C31C.0002/input/input4
>[    4.077132] input: PC Speaker as /devices/platform/pcspkr/input/input5
>[    4.136260] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-4.2.3/input0
>[    4.136722] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.1/0003:046D:C31C.0003/input/input6
>[    4.158352] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    4.158492] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    4.158596] intel_soc_dts_thermal: request_threaded_irq ret -22
>[    4.159092] [drm:i915_driver_load [i915]] No PCH found.
>[    4.159171] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00
>[    4.159401] [drm:intel_device_info_dump [i915]] i915 device info: platform=VALLEYVIEW gen=7 pciid=0x0f31 rev=0x11
>[    4.159477] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no
>[    4.159555] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: yes
>[    4.159627] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no
>[    4.159701] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: no
>[    4.159776] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes
>[    4.159849] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no
>[    4.159922] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: no
>[    4.159998] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: no
>[    4.160071] [drm:intel_device_info_dump [i915]] i915 device info: has_reset_engine: no
>[    4.160184] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: no
>[    4.160257] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: no
>[    4.160334] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes
>[    4.160407] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: no
>[    4.160480] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: yes
>[    4.160556] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no
>[    4.160629] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no
>[    4.160702] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes
>[    4.160778] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no
>[    4.160850] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: no
>[    4.160923] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: no
>[    4.160999] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_preemption: no
>[    4.161072] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no
>[    4.161145] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no
>[    4.161221] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes
>[    4.161293] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes
>[    4.161367] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no
>[    4.161443] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: no
>[    4.161516] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes
>[    4.161589] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: yes
>[    4.161663] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no
>[    4.161736] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no
>[    4.161809] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no
>[    4.161891] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no
>[    4.161969] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no
>[    4.162046] [drm:intel_device_info_dump [i915]] i915 device info: has_ipc: no
>[    4.162189] [drm:check_for_unclaimed_mmio [i915]] GTFIFODBG = 0x0810
>[    4.165758] [drm:intel_device_info_runtime_init [i915]] slice mask: 0000
>[    4.165833] [drm:intel_device_info_runtime_init [i915]] slice total: 0
>[    4.165910] [drm:intel_device_info_runtime_init [i915]] subslice total: 0
>[    4.165983] [drm:intel_device_info_runtime_init [i915]] subslice mask 0000
>[    4.166107] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 0
>[    4.166180] [drm:intel_device_info_runtime_init [i915]] EU total: 0
>[    4.166253] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 0
>[    4.166330] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n
>[    4.166402] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n
>[    4.166475] [drm:intel_device_info_runtime_init [i915]] has EU power gating: n
>[    4.166552] [drm:intel_device_info_runtime_init [i915]] CS timestamp frequency: 12500 kHz
>[    4.166625] [drm:i915_driver_load [i915]] ppgtt mode: 1
>[    4.166698] [drm:i915_driver_load [i915]] use GPU semaphores? yes
>[    4.166753] [drm] Memory usable by graphics device = 2048M
>[    4.166849] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[    4.166926] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M
>[    4.166934] [drm] Replacing VGA console driver
>[    4.167071] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 65536K
>[    4.167169] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7987e018
>[    4.167268] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[    4.167347] [drm:intel_opregion_setup [i915]] ASLE supported
>[    4.167432] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    4.167535] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    4.167548] [drm] Driver supports precise vblank timestamp query.
>[    4.167642] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz
>[    4.167726] [drm:intel_bios_init [i915]] VBT signature "$VBT VALLEYVIEW     ", BDB version 155
>[    4.167820] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    4.167902] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[    4.167987] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-19)
>[    4.168072] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[    4.168211] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[    4.168296] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[    4.168322] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    4.168405] [drm:intel_bios_init [i915]] VBT initial LVDS value 42000300
>[    4.168488] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 0, controller 0
>[    4.168571] [drm:intel_bios_init [i915]] DRRS State Enabled:0
>[    4.168657] [drm:intel_bios_init [i915]] No PSR BDB found.
>[    4.168739] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT
>[    4.168847] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[    4.168946] [drm:intel_update_rawclk [i915]] rawclk rate: 200000 kHz
>[    4.169037] [drm:intel_power_well_enable [i915]] enabling always-on
>[    4.169112] [drm:intel_power_well_enable [i915]] enabling display
>[    4.169193] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-01
>[    4.169274] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-23
>[    4.169350] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-01
>[    4.169427] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-23
>[    4.169507] [drm:intel_power_well_enable [i915]] enabling dpio-common
>[    4.170060] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
>[    4.170145] [drm:intel_modeset_init [i915]] 2 display pipes available.
>[    4.170315] [drm:intel_modeset_init [i915]] CZ clock rate: 266667 kHz
>[    4.170407] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 320000 kHz, VCO 1600000 kHz, ref 0 kHz, voltage level 2
>[    4.170493] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 400000 kHz
>[    4.170575] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 360000 kHz
>[    4.170585] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    4.171005] [drm:intel_crt_reset [i915]] crt adpa set to 0x80f40018
>[    4.171095] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
>[    4.171183] [drm:intel_dp_init_connector [i915]] using AUX B for port B (platform default)
>[    4.171279] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>[    4.171288] [drm] forcing HDMI-A-1 connector on
>[    4.171317] [drm:drm_connector_init [drm]] cmdline mode for connector HDMI-A-1 1600x900@60Hz
>[    4.171400] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (platform default)
>[    4.171495] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
>[    4.171583] [drm:intel_dp_init_connector [i915]] using AUX C for port C (platform default)
>[    4.171679] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[    4.171766] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (platform default)
>[    4.171845] [drm:intel_dsi_init [i915]] 
>[    4.171952] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
>[    4.172035] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe A] hw state readout: enabled
>[    4.172164] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x1
>[    4.172247] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:52:pipe B] hw state readout: enabled
>[    4.172333] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:54:CRT] hw state readout: enabled, pipe A
>[    4.172418] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:55:DP B] hw state readout: disabled, pipe A
>[    4.172503] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:59:HDMI B] hw state readout: disabled, pipe A
>[    4.172591] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP C] hw state readout: enabled, pipe B
>[    4.172675] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:64:HDMI C] hw state readout: disabled, pipe A
>[    4.172760] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:53:VGA-1] hw state readout: enabled
>[    4.172845] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:56:DP-1] hw state readout: disabled
>[    4.172930] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:60:HDMI-A-1] hw state readout: disabled
>[    4.177767] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:63:DP-2] hw state readout: enabled
>[    4.177857] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:65:HDMI-A-2] hw state readout: disabled
>[    4.177976] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][setup_hw_state]
>[    4.178060] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2)
>[    4.178147] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[    4.178230] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    4.178312] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    4.178334] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.178417] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    4.178437] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.178522] [drm:intel_dump_pipe_config [i915]] crtc timings: 40000 800 840 968 1056 600 601 605 628, type: 0x40 flags: 0x5
>[    4.178605] [drm:intel_dump_pipe_config [i915]] port clock: 40000, pipe src size: 800x600, pixel rate 40000
>[    4.178707] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.178789] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    4.178872] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
>[    4.178954] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    4.179054] [drm:intel_dump_pipe_config [i915]] [PLANE:27:primary A] disabled, scaler_id = 0
>[    4.179138] [drm:intel_dump_pipe_config [i915]] [PLANE:30:sprite A] disabled, scaler_id = 0
>[    4.179221] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite B] disabled, scaler_id = 0
>[    4.179305] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0
>[    4.179405] [drm:intel_dump_pipe_config [i915]] [CRTC:52:pipe B][setup_hw_state]
>[    4.179488] [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80)
>[    4.179571] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 18, dithering: 0
>[    4.179659] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 7573048, gmch_n: 8388608, link_m: 210362, link_n: 524288, tu: 64
>[    4.179741] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    4.179823] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    4.179849] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 64999 800 936 1072 1344 600 687 693 806 0x40 0x5
>[    4.179930] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    4.179950] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 64999 800 936 1072 1344 600 687 693 806 0x40 0x5
>[    4.180035] [drm:intel_dump_pipe_config [i915]] crtc timings: 64999 800 936 1072 1344 600 687 693 806, type: 0x40 flags: 0x5
>[    4.180150] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 800x600, pixel rate 64999
>[    4.180234] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.180316] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    4.180403] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0006000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
>[    4.180484] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    4.180568] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] disabled, scaler_id = 0
>[    4.180655] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite C] disabled, scaler_id = 0
>[    4.180737] [drm:intel_dump_pipe_config [i915]] [PLANE:46:sprite D] disabled, scaler_id = 0
>[    4.180821] [drm:intel_dump_pipe_config [i915]] [PLANE:49:cursor B] disabled, scaler_id = 0
>[    4.180910] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15
>[    4.180986] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15
>[    4.181061] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0
>[    4.181201] [drm:i9xx_get_initial_plane_config [i915]] pipe/plane A/0 with fb: size=800x600@32, offset=0, pitch 3200, size 0x1d4c00
>[    4.181284] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1d5000
>[    4.181402] [drm:intel_alloc_initial_plane_obj.isra.120 [i915]] initial plane fb obj ffff88005a04cc40
>[    4.181491] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
>[    4.181584] [drm:i9xx_get_initial_plane_config [i915]] pipe/plane B/1 with fb: size=800x600@32, offset=0, pitch 3200, size 0x1d4c00
>[    4.181665] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1d5000
>[    4.181745] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space
>[    4.181835] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x1
>[    4.181918] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch (null)
>[    4.181999] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch (null)
>[    4.190311] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1d6000, 80000000]
>[    4.195019] [drm:i915_ppgtt_create [i915]] Allocated pde space (2M) at GTT entry: 7fe00
>[    4.195107] [drm:i915_ppgtt_create [i915]] Adding PPGTT at offset 7fe00000
>[    4.195204] [drm:i915_gem_contexts_init [i915]] logical context support initialized
>[    4.195503] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0x001d6000
>[    4.195610] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0x7fdfd000
>[    4.195830] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0x001f7000
>[    4.196045] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0x00218000
>[    4.196230] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000
>[    4.196315] [drm:intel_init_gt_powersave [i915]] PCBR: 0x7eefa001
>[    4.196394] [drm:vlv_init_gpll_ref_freq [i915]] GPLL reference freq: 22222 kHz
>[    4.196472] [drm:intel_init_gt_powersave [i915]] DDR speed: 1066 MHz
>[    4.196553] [drm:intel_init_gt_powersave [i915]] max GPU freq: 533 MHz (207)
>[    4.196632] [drm:intel_init_gt_powersave [i915]] RPe GPU freq: 533 MHz (207)
>[    4.196710] [drm:intel_init_gt_powersave [i915]] RP1(Guar Freq) GPU freq: 533 MHz (207)
>[    4.196790] [drm:intel_init_gt_powersave [i915]] min GPU freq: 200 MHz (192)
>[    4.196899] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0
>[    4.197073] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on
>[    4.197159] [drm:intel_enable_gt_powersave [i915]] GPLL enabled? yes
>[    4.197237] [drm:intel_enable_gt_powersave [i915]] GPU status: 0x0000cf90
>[    4.197662] [drm:intel_fbdev_init [i915]] found possible fb from plane A
>[    4.197745] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
>[    4.197826] [drm:intel_fbdev_init [i915]] pipe A area: 800x600, bpp: 32, size: 1920000
>[    4.197907] [drm:intel_fbdev_init [i915]] fb big enough for plane A (1921024 >= 1920000)
>[    4.197986] [drm:intel_fbdev_init [i915]] checking plane B for BIOS fb
>[    4.198067] [drm:intel_fbdev_init [i915]] pipe B area: 800x600, bpp: 32, size: 1920000
>[    4.198146] [drm:intel_fbdev_init [i915]] fb big enough for plane B (1921024 >= 1920000)
>[    4.198226] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console
>[    4.198342] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=0
>[    4.198427] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018
>[    4.198984] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
>[    4.199298] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2
>[    4.199445] [drm] Initialized i915 1.6.0 20171109 for 0000:00:02.0 on minor 0
>[    4.199773] [drm:intel_opregion_register [i915]] 5 outputs detected
>[    4.203780] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    4.205381] acpi device:09: registered as cooling_device3
>[    4.205558] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
>[    4.205998] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-4.2.3/input1
>[    4.209806] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1
>[    4.209899] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    4.209922] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:53:VGA-1] status updated from unknown to connected
>[    4.210006] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1]
>[    4.210066] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:56:DP-1] status updated from unknown to disconnected
>[    4.210151] [drm:intel_hdmi_detect [i915]] [CONNECTOR:60:HDMI-A-1]
>[    4.212149] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.212229] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.213254] pstore: using zlib compression
>[    4.213265] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>[    4.214447] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.214472] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.216195] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.216275] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.218436] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.218454] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.218467] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] status updated from unknown to disconnected
>[    4.218550] [drm:intel_dp_detect [i915]] [CONNECTOR:63:DP-2]
>[    4.218565] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:63:DP-2] status updated from unknown to disconnected
>[    4.218646] [drm:intel_hdmi_detect [i915]] [CONNECTOR:65:HDMI-A-2]
>[    4.220160] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.220241] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.222432] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.222458] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.224226] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.224307] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.226493] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.226511] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.226528] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] status updated from unknown to disconnected
>[    4.226675] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    4.226741] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    4.226758] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1]
>[    4.226856] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1
>[    4.226943] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018
>[    4.237733] pstore: Registered efi as persistent store backend
>[    4.242204] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1
>[    4.242286] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    4.288089] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    4.288377] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes :
>[    4.288398] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5
>[    4.288418] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    4.288437] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    4.288456] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    4.288475] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    4.288495] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    4.288514] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    4.288533] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    4.288552] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[    4.288571] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    4.288590] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.288609] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    4.288628] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    4.288647] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    4.288658] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1]
>[    4.288756] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1]
>[    4.288771] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected
>[    4.288782] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1]
>[    4.288861] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1]
>[    4.291008] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.291088] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.293216] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.293241] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.295380] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.295460] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.297595] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.297617] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.297629] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] status updated from disconnected to connected
>[    4.297849] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes :
>[    4.297874] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6
>[    4.297894] [drm:drm_mode_debug_printmodeline [drm]] Modeline 88:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    4.297913] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.297932] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    4.297951] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    4.297970] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    4.297981] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2]
>[    4.298073] [drm:intel_dp_detect [i915]] [CONNECTOR:63:DP-2]
>[    4.298088] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2] disconnected
>[    4.298100] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2]
>[    4.298179] [drm:intel_hdmi_detect [i915]] [CONNECTOR:65:HDMI-A-2]
>[    4.300195] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.300277] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.302414] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.302439] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.304155] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.304236] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.306371] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.306389] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.306401] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] disconnected
>[    4.306413] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes
>[    4.306421] [drm:drm_setup_crtcs [drm_kms_helper]] connector 56 enabled? no
>[    4.306428] [drm:drm_setup_crtcs [drm_kms_helper]] connector 60 enabled? yes
>[    4.306436] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? no
>[    4.306443] [drm:drm_setup_crtcs [drm_kms_helper]] connector 65 enabled? no
>[    4.306531] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    4.306542] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 53
>[    4.306551] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 53 0
>[    4.306558] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900
>[    4.306566] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 60
>[    4.306573] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900
>[    4.306581] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
>[    4.306598] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 39 (0,0)
>[    4.306613] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 52 (0,0)
>[    4.306699] [drm:intelfb_create [i915]] BIOS fb too small (800x600), we require (1600x900), releasing it
>[    4.306778] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
>[    4.309719] [drm:intelfb_create [i915]] allocated 1600x900 fb: 0x00240000
>[    4.309938] fbcon: inteldrmfb (fb0) is primary device
>[    4.310231] [drm:intel_atomic_check [i915]] [CONNECTOR:53:VGA-1] checking for sink bpp constrains
>[    4.310314] [drm:intel_atomic_check [i915]] clamping display bpp (was 30) to default limit of 24
>[    4.310400] [drm:intel_atomic_check [i915]] hw max bpp: 30, pipe bpp: 24, dithering: 0
>[    4.310483] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][modeset]
>[    4.310566] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2)
>[    4.310651] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[    4.310733] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    4.310814] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    4.310839] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5
>[    4.310920] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    4.310940] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5
>[    4.311024] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1600 1624 1704 1800 900 901 904 1000, type: 0x48 flags: 0x5
>[    4.311110] [drm:intel_dump_pipe_config [i915]] port clock: 108000, pipe src size: 1600x900, pixel rate 108000
>[    4.311193] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.311274] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    4.311359] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
>[    4.311440] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    4.311526] [drm:intel_dump_pipe_config [i915]] [PLANE:27:primary A] FB:68, fb = 800x600 format = XR24 little-endian (0x34325258)
>[    4.311612] [drm:intel_dump_pipe_config [i915]] [PLANE:30:sprite A] disabled, scaler_id = 0
>[    4.311694] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite B] disabled, scaler_id = 0
>[    4.311776] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0
>[    4.311863] [drm:intel_atomic_check [i915]] [CONNECTOR:60:HDMI-A-1] checking for sink bpp constrains
>[    4.311945] [drm:intel_atomic_check [i915]] clamping display bpp (was 30) to default limit of 24
>[    4.312046] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output
>[    4.312207] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpp to 24 for HDMI
>[    4.312293] [drm:intel_atomic_check [i915]] hw max bpp: 30, pipe bpp: 24, dithering: 0
>[    4.312378] [drm:intel_dump_pipe_config [i915]] [CRTC:52:pipe B][modeset]
>[    4.312460] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40)
>[    4.312545] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0
>[    4.312627] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    4.312708] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    4.312732] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6
>[    4.312814] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    4.312833] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6
>[    4.312917] [drm:intel_dump_pipe_config [i915]] crtc timings: 118963 1600 1696 1864 2128 900 901 904 932, type: 0x20 flags: 0x6
>[    4.313003] [drm:intel_dump_pipe_config [i915]] port clock: 118963, pipe src size: 1600x900, pixel rate 118963
>[    4.313087] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.313169] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    4.313253] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0006000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
>[    4.313334] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    4.313419] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] FB:68, fb = 800x600 format = XR24 little-endian (0x34325258)
>[    4.313505] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite C] disabled, scaler_id = 0
>[    4.313587] [drm:intel_dump_pipe_config [i915]] [PLANE:46:sprite D] disabled, scaler_id = 0
>[    4.313669] [drm:intel_dump_pipe_config [i915]] [PLANE:49:cursor B] disabled, scaler_id = 0
>[    4.313757] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 266667 kHz, actual 266667 kHz
>[    4.313839] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1
>[    4.313978] [drm:vlv_compute_pipe_wm [i915]] primary A watermarks: PM2=100, PM5=0, DDR DVFS=0
>[    4.314104] [drm:vlv_compute_pipe_wm [i915]] primary B watermarks: PM2=100, PM5=0, DDR DVFS=0
>[    4.315888] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled)
>[    4.315988] [drm:intel_disable_pipe [i915]] disabling pipe A
>[    4.326251] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled)
>[    4.326351] [drm:intel_disable_pipe [i915]] disabling pipe B
>[    4.342178] [drm:intel_dp_link_down.isra.23 [i915]] 
>[    4.348174] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 266667 kHz, VCO 1600000 kHz, ref 0 kHz, voltage level 1
>[    4.350333] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:CRT]
>[    4.350417] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP B]
>[    4.350499] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:HDMI B]
>[    4.350581] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP C]
>[    4.350667] [drm:intel_atomic_commit_tail [i915]] [ENCODER:64:HDMI C]
>[    4.350749] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:63:DP-2]
>[    4.351073] [drm:intel_enable_pipe [i915]] enabling pipe A
>[    4.351489] [drm:intel_enable_pipe [i915]] enabling pipe B
>[    4.368313] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:53:VGA-1]
>[    4.368407] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A]
>[    4.368514] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:60:HDMI-A-1]
>[    4.368601] [drm:intel_atomic_commit_tail [i915]] [CRTC:52:pipe B]
>[    4.368659] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] 
>[    4.368666] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    4.368679] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1]
>[    4.368765] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1
>[    4.368849] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018
>[    4.386188] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1
>[    4.386269] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    4.422266] iTCO_vendor_support: vendor-support=0
>[    4.423107] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    4.423219] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
>[    4.423558] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    4.424099] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    4.424378] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    4.424394] [drm:drm_mode_prune_invalid [drm]] Not using 1280x1024 mode: VIRTUAL_Y
>[    4.424414] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    4.424430] [drm:drm_mode_prune_invalid [drm]] Not using 1280x1024 mode: VIRTUAL_Y
>[    4.424446] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes :
>[    4.424466] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5
>[    4.424485] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    4.424503] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    4.424522] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    4.424541] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    4.424559] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    4.424578] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[    4.424596] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    4.424615] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.424633] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    4.424652] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    4.424670] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    4.424681] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1]
>[    4.424780] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1]
>[    4.424795] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected
>[    4.424805] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1]
>[    4.424887] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1]
>[    4.427030] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.427109] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.429251] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.429275] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.431417] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.431497] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.433640] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.433659] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.433882] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes :
>[    4.433904] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6
>[    4.433923] [drm:drm_mode_debug_printmodeline [drm]] Modeline 88:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    4.433942] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.433960] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    4.433979] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    4.433997] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    4.434008] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2]
>[    4.434099] [drm:intel_dp_detect [i915]] [CONNECTOR:63:DP-2]
>[    4.434114] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2] disconnected
>[    4.434125] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2]
>[    4.434204] [drm:intel_hdmi_detect [i915]] [CONNECTOR:65:HDMI-A-2]
>[    4.436163] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.436246] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.438402] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.438439] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.440156] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.440235] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.442385] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.442403] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.442416] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] disconnected
>[    4.442427] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes
>[    4.442434] [drm:drm_setup_crtcs [drm_kms_helper]] connector 56 enabled? no
>[    4.442441] [drm:drm_setup_crtcs [drm_kms_helper]] connector 60 enabled? yes
>[    4.442449] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? no
>[    4.442456] [drm:drm_setup_crtcs [drm_kms_helper]] connector 65 enabled? no
>[    4.442542] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    4.442553] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 53
>[    4.442561] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 53 0
>[    4.442567] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900
>[    4.442574] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 60
>[    4.442582] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900
>[    4.442589] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1600x900 config
>[    4.442611] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 39 (0,0)
>[    4.442623] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 52 (0,0)
>[    4.451599] Console: switching to colour frame buffer device 200x56
>[    4.492603] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    4.551251] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[    4.551439] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.551564] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.551678] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    4.551777] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    4.551899] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[    4.552108] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
>[    4.633446] snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
>[    4.633637] snd_hda_codec_generic hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.633774] snd_hda_codec_generic hdaudioC0D2:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.637661] snd_hda_codec_generic hdaudioC0D2:    mono: mono_out=0x0
>[    4.641433] snd_hda_codec_generic hdaudioC0D2:    dig-out=0x4/0x0
>[    4.645159] snd_hda_codec_generic hdaudioC0D2:    inputs:
>[    4.655043] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[    4.745876] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    5.091034] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
>[    5.108499] br0: port 1(enp2s0) entered blocking state
>[    5.108503] br0: port 1(enp2s0) entered disabled state
>[    5.108662] device enp2s0 entered promiscuous mode
>[    5.160963] IPv6: ADDRCONF(NETDEV_UP): veth0a: link is not ready
>[    5.160973] br0: port 2(veth0a) entered blocking state
>[    5.160976] br0: port 2(veth0a) entered disabled state
>[    5.161095] device veth0a entered promiscuous mode
>[    5.215100] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
>[    5.657204] IPv6: ADDRCONF(NETDEV_CHANGE): veth0a: link becomes ready
>[    5.657262] br0: port 2(veth0a) entered blocking state
>[    5.657265] br0: port 2(veth0a) entered forwarding state
>[    5.657349] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
>[    5.887498] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[    5.888223] [drm:intel_framebuffer_init [i915]] No Y tiling for legacy addfb
>[    5.888251] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
>[    5.888303] [drm:intel_framebuffer_init [i915]] Unsupported tiling 0x100000000000002!
>[    5.888320] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
>[    5.888385] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[    5.979747] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    6.069719] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[    6.308838] IPv6: ADDRCONF(NETDEV_UP): veth1a: link is not ready
>[    6.362423] IPv6: ADDRCONF(NETDEV_CHANGE): veth1a: link becomes ready
>[    6.652661] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
>[    6.688927] [drm:drm_mode_addfb2 [drm]] [FB:93]
>[    6.689074] [drm:drm_mode_setcrtc [drm]] [CRTC:39:pipe A]
>[    6.689106] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:53:VGA-1]
>[    6.702313] [drm:drm_mode_setcrtc [drm]] [CRTC:52:pipe B]
>[    6.702354] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:60:HDMI-A-1]
>[    6.760310] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
>[    6.905043] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=63, PM5=0, DDR DVFS=0
>[    6.905319] [drm:vlv_compute_pipe_wm [i915]] cursor B watermarks: PM2=63, PM5=0, DDR DVFS=0
>[    6.955510] [drm:intel_engine_cmd_parser [i915]] CMD: Rejected register 0x00002360 in command: 0x11000001 (rcs0)
>[    7.802762] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=0, PM5=0, DDR DVFS=0
>[    7.819281] [drm:vlv_compute_pipe_wm [i915]] cursor B watermarks: PM2=0, PM5=0, DDR DVFS=0
>[    7.891465] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1]
>[    7.891517] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1]
>[    7.891537] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected
>[    7.891574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2]
>[    7.891615] [drm:intel_dp_detect [i915]] [CONNECTOR:63:DP-2]
>[    7.891630] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2] disconnected
>[    7.891652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1]
>[    7.891691] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1]
>[    7.893783] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    7.893824] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    7.895915] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    7.895942] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    7.898047] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    7.898087] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    7.900119] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    7.900139] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.900362] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes :
>[    7.900385] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6
>[    7.900405] [drm:drm_mode_debug_printmodeline [drm]] Modeline 88:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    7.900424] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    7.900447] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    7.900466] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    7.900485] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    7.900590] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2]
>[    7.900636] [drm:intel_hdmi_detect [i915]] [CONNECTOR:65:HDMI-A-2]
>[    7.902941] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.902982] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.904666] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.904693] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    7.906779] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.906838] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.908718] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.908743] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.908755] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] disconnected
>[    7.908799] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1]
>[    7.908844] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1
>[    7.908893] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018
>[    7.920139] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1
>[    7.920184] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    7.959405] systemd-journald[17]: Received request to flush runtime journal from PID 1
>[    7.960113] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    7.960420] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes :
>[    7.960442] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5
>[    7.960462] [drm:drm_mode_debug_printmodeline [drm]] Modeline 102:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    7.960481] [drm:drm_mode_debug_printmodeline [drm]] Modeline 97:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    7.960500] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    7.960519] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    7.960539] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    7.960562] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    7.960581] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    7.960600] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[    7.960619] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    7.960637] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    7.960656] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    7.960675] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    7.960694] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    7.965643] [drm:drm_mode_addfb2 [drm]] [FB:66]
>[    8.116763] [drm:drm_mode_addfb2 [drm]] [FB:91]
>[    9.107379] [drm:drm_mode_addfb2 [drm]] [FB:96]
>[   27.059726] random: crng init done
>[  548.567011] perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000

Actions: View

Attachments on bug 103779: 135517 | 135518 | 135519 | 135776 | 135777 | 135778 | 135779 | 135792 | 135793 | 135794 | 135795 | 136088

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.