Attachment 136088 Details for Bug 103779 – kernel dmesg without patch (clean) and with BIOS LVDS option enabled

kernel dmesg without patch (clean) and with BIOS LVDS option enabled

dmesg_clean_LVDS_enabled (text/plain), 95.32 KB, created by Tomasz Kazimierczak on 2017-12-11 17:03:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tomasz Kazimierczak

Created: 2017-12-11 17:03:42 UTC

Size: 95.32 KB

patch

obsolete

>[    0.000000] Linux version 4.14.0sims1-g06718a287f28 (tkazimierczak@stretch64poligon) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Wed Nov 15 16:14:54 CET 2017
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0sims1-g06718a287f28 root=UUID=9293316a-c68c-446a-8482-55da58c06e16 ro drm.debug=0xe log_bug_len=1M video=HDMI-A-1:1600x900e
>[    0.000000] x86/fpu: x87 FPU will use FXSAVE
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000793b3fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000793b4000-0x00000000793e3fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000793e4000-0x00000000793f3fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000793f4000-0x00000000798dbfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000798dc000-0x0000000079b61fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000079b62000-0x0000000079bacfff] type 20
>[    0.000000] BIOS-e820: [mem 0x0000000079bad000-0x0000000079badfff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000079bae000-0x0000000079beffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000079bf0000-0x0000000079d60fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000079d61000-0x0000000079ff9fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000079ffa000-0x0000000079ffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.31 by American Megatrends
>[    0.000000] efi:  ACPI=0x793eb000  ACPI 2.0=0x793eb000  ESRT=0x79b5e018  SMBIOS=0xf0560  MPS=0xfd5f0 
>[    0.000000] random: fast init done
>[    0.000000] SMBIOS 2.8 present.
>[    0.000000] DMI: AAEON GENE-BT05/GENE-BT05, BIOS GBT5AM16 11/19/2015
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 07A800000 mask FFF800000 uncachable
>[    0.000000]   2 base 07B000000 mask FFF000000 uncachable
>[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [ffffffffff240800]
>[    0.000000] esrt: Reserving ESRT space from 0x0000000079b5e018 to 0x0000000079b5e050.
>[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>[    0.000000] BRK [0x01a8c000, 0x01a8cfff] PGTABLE
>[    0.000000] BRK [0x01a8d000, 0x01a8dfff] PGTABLE
>[    0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE
>[    0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE
>[    0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE
>[    0.000000] BRK [0x01a91000, 0x01a91fff] PGTABLE
>[    0.000000] Secure boot could not be determined
>[    0.000000] RAMDISK: [mem 0x371b5000-0x378d1fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000793EB000 000024 (v02 ALASKA)
>[    0.000000] ACPI: XSDT 0x00000000793EB080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000793F2ED0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170728/tbfadt-603)
>[    0.000000] ACPI: DSDT 0x00000000793EB188 007D41 (v02 ALASKA A M I    01072009 INTL 20120913)
>[    0.000000] ACPI: FACS 0x00000000798DBF80 000040
>[    0.000000] ACPI: APIC 0x00000000793F2FE0 000068 (v03 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x00000000793F3048 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: LPIT 0x00000000793F3090 000104 (v01 ALASKA A M I    00000003 VLV2 0100000D)
>[    0.000000] ACPI: MCFG 0x00000000793F3198 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
>[    0.000000] ACPI: HPET 0x00000000793F31D8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
>[    0.000000] ACPI: SSDT 0x00000000793F3210 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000793F3978 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000793F3C08 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
>[    0.000000] ACPI: UEFI 0x00000000793F3D88 000042 (v01 ALASKA A M I    00000000      00000000)
>[    0.000000] ACPI: CSRT 0x00000000793F3DD0 00014C (v00 INTEL  EDK2     00000005 INTL 20120624)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000079ffffff]
>[    0.000000]   Normal   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000003efff]
>[    0.000000]   node   0: [mem 0x0000000000040000-0x000000000009ffff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001effffff]
>[    0.000000]   node   0: [mem 0x000000001f100000-0x000000001fffffff]
>[    0.000000]   node   0: [mem 0x0000000020100000-0x00000000793b3fff]
>[    0.000000]   node   0: [mem 0x0000000079bad000-0x0000000079badfff]
>[    0.000000]   node   0: [mem 0x0000000079bf0000-0x0000000079d60fff]
>[    0.000000]   node   0: [mem 0x0000000079ffa000-0x0000000079ffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff]
>[    0.000000] On node 0 totalpages: 496330
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7744 pages used for memmap
>[    0.000000]   DMA32 zone: 492332 pages, LIFO batch:31
>[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
>[    0.000000] Reserving Intel graphics memory at 0x000000007b000000-0x000000007effffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x793b4000-0x793e3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x793e4000-0x793f3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x793f4000-0x798dbfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x798dc000-0x79b61fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79b62000-0x79bacfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79bae000-0x79beffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79d61000-0x79ff9fff]
>[    0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] percpu: Embedded 36 pages/cpu @ffff880076400000 s107032 r8192 d32232 u1048576
>[    0.000000] pcpu-alloc: s107032 r8192 d32232 u1048576 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 488496
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0sims1-g06718a287f28 root=UUID=9293316a-c68c-446a-8482-55da58c06e16 ro drm.debug=0xe log_bug_len=1M video=HDMI-A-1:1600x900e
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.000000] Memory: 1886412K/1985320K available (5390K kernel code, 919K rwdata, 1864K rodata, 1152K init, 452K bss, 98908K reserved, 0K cma-reserved)
>[    0.000000] ftrace: allocating 23818 entries in 94 pages
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>[    0.000000] NR_IRQS: 4352, nr_irqs: 512, preallocated irqs: 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.004000] tsc: Detected 1333.000 MHz processor
>[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.00 BogoMIPS (lpj=5332000)
>[    0.004000] pid_max: default: 32768 minimum: 301
>[    0.004000] ACPI: Core revision 20170728
>[    0.019929] ACPI: 4 ACPI AML tables successfully acquired and loaded
>[    0.021090] Security Framework initialized
>[    0.021148] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.021169] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.021621] CPU: Physical Processor ID: 0
>[    0.021633] CPU: Processor Core ID: 0
>[    0.021643] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.021650] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.021671] mce: CPU supports 6 MCE banks
>[    0.021685] CPU0: Thermal monitoring enabled (TM1)
>[    0.021696] process: using mwait in idle threads
>[    0.021707] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
>[    0.021715] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
>[    0.021965] Freeing SMP alternatives memory: 24K
>[    0.026626] smpboot: Max logical packages: 1
>[    0.027396] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.067117] TSC deadline timer enabled
>[    0.067121] smpboot: CPU0: Intel(R) Atom(TM) CPU  E3825  @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x9)
>[    0.067375] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
>[    0.067416] ... version:                3
>[    0.067422] ... bit width:              40
>[    0.067428] ... generic registers:      2
>[    0.067435] ... value mask:             000000ffffffffff
>[    0.067441] ... max period:             0000007fffffffff
>[    0.067448] ... fixed-purpose events:   3
>[    0.067454] ... event mask:             0000000700000003
>[    0.067568] Hierarchical SRCU implementation.
>[    0.068000] smp: Bringing up secondary CPUs ...
>[    0.068000] x86: Booting SMP configuration:
>[    0.068000] .... node  #0, CPUs:      #1
>[    0.068000] smp: Brought up 1 node, 2 CPUs
>[    0.068000] smpboot: Total of 2 processors activated (5332.00 BogoMIPS)
>[    0.068000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.068000] devtmpfs: initialized
>[    0.068000] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes)
>[    0.068000] PM: Registering ACPI NVS region [mem 0x793f4000-0x798dbfff] (5144576 bytes)
>[    0.068000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.068000] futex hash table entries: 512 (order: 3, 32768 bytes)
>[    0.068000] pinctrl core: initialized pinctrl subsystem
>[    0.068307] NET: Registered protocol family 16
>[    0.068771] cpuidle: using governor ladder
>[    0.068796] cpuidle: using governor menu
>[    0.068895] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.068907] ACPI: bus type PCI registered
>[    0.069054] PCI: Using configuration type 1 for base access
>[    0.069689] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.069689] ACPI: Added _OSI(Module Device)
>[    0.069689] ACPI: Added _OSI(Processor Device)
>[    0.069689] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.069689] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.084384] ACPI: Dynamic OEM Table Load:
>[    0.084412] ACPI: SSDT 0xFFFF880076342C00 0002F6 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
>[    0.085049] ACPI: Dynamic OEM Table Load:
>[    0.085070] ACPI: SSDT 0xFFFF8800761F5800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
>[    0.086477] ACPI: Dynamic OEM Table Load:
>[    0.086498] ACPI: SSDT 0xFFFF8800760FDE00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
>[    0.087082] ACPI: Dynamic OEM Table Load:
>[    0.087101] ACPI: SSDT 0xFFFF880076353900 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
>[    0.089354] ACPI: Interpreter enabled
>[    0.089421] ACPI: (supports S0 S3 S4 S5)
>[    0.089430] ACPI: Using IOAPIC for interrupt routing
>[    0.089531] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.090587] ACPI: Enabled 9 GPEs in block 00 to 3F
>[    0.526946] ACPI: Power Resource [USBC] (on)
>[    0.530419] ACPI: Power Resource [PLPE] (on)
>[    0.531132] ACPI: Power Resource [PLPE] (on)
>[    0.533861] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.533884] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
>[    0.534529] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
>[    0.535290] PCI host bridge to bus 0000:00
>[    0.535304] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
>[    0.535315] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
>[    0.535325] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
>[    0.535335] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.535345] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.535356] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
>[    0.535367] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
>[    0.535378] pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0822ffe window]
>[    0.535389] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.535412] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
>[    0.535720] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
>[    0.535741] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
>[    0.535757] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
>[    0.535771] pci 0000:00:02.0: reg 0x20: [io  0xe080-0xe087]
>[    0.535799] pci 0000:00:02.0: BAR 2: assigned to efifb
>[    0.536096] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501
>[    0.536124] pci 0000:00:12.0: reg 0x10: [mem 0xd0822000-0xd0822fff]
>[    0.536137] pci 0000:00:12.0: reg 0x14: [mem 0xd0821000-0xd0821fff]
>[    0.536223] pci 0000:00:12.0: PME# supported from D0 D3hot
>[    0.536478] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
>[    0.536506] pci 0000:00:13.0: reg 0x10: [io  0xe070-0xe077]
>[    0.536518] pci 0000:00:13.0: reg 0x14: [io  0xe060-0xe063]
>[    0.536530] pci 0000:00:13.0: reg 0x18: [io  0xe050-0xe057]
>[    0.536542] pci 0000:00:13.0: reg 0x1c: [io  0xe040-0xe043]
>[    0.536554] pci 0000:00:13.0: reg 0x20: [io  0xe020-0xe03f]
>[    0.536566] pci 0000:00:13.0: reg 0x24: [mem 0xd0820000-0xd08207ff]
>[    0.536626] pci 0000:00:13.0: PME# supported from D3hot
>[    0.536880] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
>[    0.536909] pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit]
>[    0.536986] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.537250] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
>[    0.537285] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
>[    0.537302] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
>[    0.537422] pci 0000:00:1a.0: PME# supported from D0 D3hot
>[    0.537715] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
>[    0.537747] pci 0000:00:1b.0: reg 0x10: [mem 0xd0814000-0xd0817fff 64bit]
>[    0.537837] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.538091] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
>[    0.538175] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.538436] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
>[    0.538519] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.538781] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
>[    0.538864] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.539126] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
>[    0.539208] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.539483] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
>[    0.539824] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
>[    0.539874] pci 0000:00:1f.3: reg 0x10: [mem 0xd081c000-0xd081c01f]
>[    0.539951] pci 0000:00:1f.3: reg 0x20: [io  0xe000-0xe01f]
>[    0.540422] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000
>[    0.540465] pci 0000:01:00.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
>[    0.540508] pci 0000:01:00.0: reg 0x18: [io  0xd000-0xd01f]
>[    0.540526] pci 0000:01:00.0: reg 0x1c: [mem 0xd0720000-0xd0723fff]
>[    0.540674] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>[    0.552045] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.552061] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
>[    0.552068] pci 0000:00:1c.0:   bridge window [mem 0xd0700000-0xd07fffff]
>[    0.552214] pci 0000:02:00.0: [8086:1539] type 00 class 0x020000
>[    0.552256] pci 0000:02:00.0: reg 0x10: [mem 0xd0600000-0xd061ffff]
>[    0.552298] pci 0000:02:00.0: reg 0x18: [io  0xc000-0xc01f]
>[    0.552316] pci 0000:02:00.0: reg 0x1c: [mem 0xd0620000-0xd0623fff]
>[    0.552465] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.564039] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.564053] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
>[    0.564060] pci 0000:00:1c.1:   bridge window [mem 0xd0600000-0xd06fffff]
>[    0.564165] pci 0000:00:1c.2: PCI bridge to [bus 03]
>[    0.564274] pci 0000:00:1c.3: PCI bridge to [bus 04]
>[    0.564314] pci_bus 0000:00: on NUMA node 0
>[    0.772775] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.773004] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.773224] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.773445] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.773666] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.773886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.774106] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.774330] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.775225] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.775225] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.775225] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.775225] vgaarb: loaded
>[    0.775225] Registered efivars operations
>[    0.780403] PCI: Using ACPI for IRQ routing
>[    0.780415] PCI: pci_cache_line_size set to 64 bytes
>[    0.780436] pci 0000:00:12.0: can't claim BAR 0 [mem 0xd0822000-0xd0822fff]: no compatible bridge window
>[    0.780542] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
>[    0.780546] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
>[    0.780549] e820: reserve RAM buffer [mem 0x793b4000-0x7bffffff]
>[    0.780553] e820: reserve RAM buffer [mem 0x79bae000-0x7bffffff]
>[    0.780556] e820: reserve RAM buffer [mem 0x79d61000-0x7bffffff]
>[    0.780559] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
>[    0.780867] clocksource: Switched to clocksource refined-jiffies
>[    0.805191] pnp: PnP ACPI init
>[    0.805331] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.805689] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.805705] system 00:01: [io  0x0400-0x047f] has been reserved
>[    0.805716] system 00:01: [io  0x0500-0x05fe] has been reserved
>[    0.805726] system 00:01: [io  0x0600-0x061f] has been reserved
>[    0.805747] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.806247] system 00:02: [io  0x0a00-0x0a0f] has been reserved
>[    0.806261] system 00:02: [io  0x0a10-0x0a1f] has been reserved
>[    0.806271] system 00:02: [io  0x0a20-0x0a2f] has been reserved
>[    0.806291] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.806409] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.806564] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
>[    0.807448] pnp 00:05: [dma 3]
>[    0.807770] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
>[    0.808414] pnp 00:06: [dma 0 disabled]
>[    0.808547] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.809182] pnp 00:07: [dma 0 disabled]
>[    0.809308] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.809889] ACPI: IRQ 10 override to edge, high
>[    0.809906] pnp 00:08: [dma 0 disabled]
>[    0.810035] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.810613] ACPI: IRQ 10 override to edge, high
>[    0.810629] pnp 00:09: [dma 0 disabled]
>[    0.810753] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
>[    1.016688] system 00:0a: [mem 0xe0000000-0xefffffff] could not be reserved
>[    1.016705] system 00:0a: [mem 0xfed01000-0xfed01fff] has been reserved
>[    1.016719] system 00:0a: [mem 0xfed03000-0xfed03fff] has been reserved
>[    1.016731] system 00:0a: [mem 0xfed04000-0xfed04fff] has been reserved
>[    1.016741] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
>[    1.016752] system 00:0a: [mem 0xfed1c000-0xfed1cfff] has been reserved
>[    1.016764] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    1.016775] system 00:0a: [mem 0xfef00000-0xfeffffff] has been reserved
>[    1.016797] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.017416] pnp: PnP ACPI: found 11 devices
>[    1.026360] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    1.026402] clocksource: Switched to clocksource acpi_pm
>[    1.026462] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
>[    1.026477] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
>[    1.026490] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
>[    1.026496] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
>[    1.026501] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
>[    1.026512] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
>[    1.026518] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
>[    1.026523] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
>[    1.026560] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
>[    1.026582] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
>[    1.026597] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80400000-0x805fffff]
>[    1.026616] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
>[    1.026630] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80800000-0x809fffff]
>[    1.026649] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80a00000-0x80bfffff 64bit pref]
>[    1.026663] pci 0000:00:12.0: BAR 0: assigned [mem 0x80c00000-0x80c00fff]
>[    1.026681] pci 0000:00:1c.2: BAR 13: assigned [io  0x1000-0x1fff]
>[    1.026693] pci 0000:00:1c.3: BAR 13: assigned [io  0x2000-0x2fff]
>[    1.026709] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    1.026719] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
>[    1.026732] pci 0000:00:1c.0:   bridge window [mem 0xd0700000-0xd07fffff]
>[    1.026744] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
>[    1.026758] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    1.026768] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
>[    1.026780] pci 0000:00:1c.1:   bridge window [mem 0xd0600000-0xd06fffff]
>[    1.026792] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
>[    1.026806] pci 0000:00:1c.2: PCI bridge to [bus 03]
>[    1.026816] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
>[    1.026828] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff]
>[    1.026840] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
>[    1.026854] pci 0000:00:1c.3: PCI bridge to [bus 04]
>[    1.026864] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
>[    1.026876] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff]
>[    1.026888] pci 0000:00:1c.3:   bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
>[    1.026903] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
>[    1.026908] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
>[    1.026912] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
>[    1.026916] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
>[    1.026920] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
>[    1.026924] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
>[    1.026927] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
>[    1.026931] pci_bus 0000:00: resource 11 [mem 0x80000000-0xd0822ffe window]
>[    1.026936] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>[    1.026939] pci_bus 0000:01: resource 1 [mem 0xd0700000-0xd07fffff]
>[    1.026943] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
>[    1.026947] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
>[    1.026951] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff]
>[    1.026955] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
>[    1.026959] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
>[    1.026963] pci_bus 0000:03: resource 1 [mem 0x80400000-0x805fffff]
>[    1.026966] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
>[    1.026971] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
>[    1.026974] pci_bus 0000:04: resource 1 [mem 0x80800000-0x809fffff]
>[    1.026978] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref]
>[    1.027276] NET: Registered protocol family 2
>[    1.027629] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>[    1.027711] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
>[    1.027833] TCP: Hash tables configured (established 16384 bind 16384)
>[    1.027931] UDP hash table entries: 1024 (order: 3, 32768 bytes)
>[    1.027968] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>[    1.027968] NET: Registered protocol family 1
>[    1.027968] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    1.027968] PCI: CLS 64 bytes, default 64
>[    1.027968] Unpacking initramfs...
>[    1.320800] Freeing initrd memory: 7284K
>[    1.320982] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1336e3dbd1a, max_idle_ns: 440795236868 ns
>[    1.321045] clocksource: Switched to clocksource tsc
>[    1.321731] audit: initializing netlink subsys (disabled)
>[    1.321865] audit: type=2000 audit(1513011420.321:1): state=initialized audit_enabled=0 res=1
>[    1.322382] workingset: timestamp_bits=46 max_order=19 bucket_order=0
>[    1.323792] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>[    1.323884] io scheduler noop registered
>[    1.323893] io scheduler deadline registered
>[    1.323939] io scheduler cfq registered (default)
>[    1.323948] io scheduler mq-deadline registered
>[    1.323955] io scheduler kyber registered
>[    1.325185] intel_idle: MWAIT substates: 0x3000020
>[    1.325189] intel_idle: v0.4.1 model 0x37
>[    1.325361] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    1.329132] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.350058] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.371364] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
>[    1.392764] 00:08: ttyS2 at I/O 0x3e8 (irq = 10, base_baud = 115200) is a 16550A
>[    1.414911] 00:09: ttyS3 at I/O 0x2e8 (irq = 10, base_baud = 115200) is a 16550A
>[    1.417206] hpet: number irqs doesn't agree with number of timers
>[    1.418903] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.419385] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.419406] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.419611] rtc_cmos 00:00: RTC can wake from S4
>[    1.421033] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
>[    1.421089] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
>[    1.421144] IR NEC protocol handler initialized
>[    1.421152] IR RC5(x/sz) protocol handler initialized
>[    1.421159] IR RC6 protocol handler initialized
>[    1.421165] IR JVC protocol handler initialized
>[    1.421171] IR Sony protocol handler initialized
>[    1.421177] IR SANYO protocol handler initialized
>[    1.421183] IR Sharp protocol handler initialized
>[    1.421189] IR MCE Keyboard/mouse protocol handler initialized
>[    1.421196] IR XMP protocol handler initialized
>[    1.421207] intel_pstate: Intel P-state driver initializing
>[    1.423895] NET: Registered protocol family 10
>[    1.425656] Segment Routing with IPv6
>[    1.425752] mip6: Mobile IPv6
>[    1.425775] NET: Registered protocol family 17
>[    1.427530] microcode: sig=0x30679, pf=0x1, revision=0x903
>[    1.428411] microcode: Microcode Update Driver: v2.2.
>[    1.428465] sched_clock: Marking stable (1428355954, 0)->(1430759092, -2403138)
>[    1.430346] registered taskstats version 1
>[    1.431693] rtc_cmos 00:00: setting system clock to 2017-12-11 16:57:00 UTC (1513011420)
>[    1.446589] Freeing unused kernel memory: 1152K
>[    1.446606] Write protecting the kernel read-only data: 8192k
>[    1.448160] Freeing unused kernel memory: 740K
>[    1.450095] Freeing unused kernel memory: 184K
>[    1.662174] SCSI subsystem initialized
>[    1.666501] ACPI: bus type USB registered
>[    1.666610] usbcore: registered new interface driver usbfs
>[    1.666662] usbcore: registered new interface driver hub
>[    1.666779] usbcore: registered new device driver usb
>[    1.667221] pps_core: LinuxPPS API ver. 1 registered
>[    1.667236] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    1.667827] PTP clock support registered
>[    1.668421] dca service started, version 1.12.1
>[    1.671577] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.671619] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.672788] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    1.672812] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.673086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.673104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.673119] usb usb1: Product: xHCI Host Controller
>[    1.673130] usb usb1: Manufacturer: Linux 4.14.0sims1-g06718a287f28 xhci-hcd
>[    1.673144] usb usb1: SerialNumber: 0000:00:14.0
>[    1.673604] hub 1-0:1.0: USB hub found
>[    1.673651] hub 1-0:1.0: 6 ports detected
>[    1.674550] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
>[    1.674566] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.676234] libata version 3.00 loaded.
>[    1.681905] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.681930] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.682070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.682082] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.682093] usb usb2: Product: xHCI Host Controller
>[    1.682101] usb usb2: Manufacturer: Linux 4.14.0sims1-g06718a287f28 xhci-hcd
>[    1.682110] usb usb2: SerialNumber: 0000:00:14.0
>[    1.682457] hub 2-0:1.0: USB hub found
>[    1.682488] hub 2-0:1.0: 1 port detected
>[    1.683690] ahci 0000:00:13.0: version 3.0
>[    1.684397] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
>[    1.695148] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x2 impl SATA mode
>[    1.695168] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso 
>[    1.696969] scsi host0: ahci
>[    1.697362] scsi host1: ahci
>[    1.697539] ata1: DUMMY
>[    1.697554] ata2: SATA max UDMA/133 abar m2048@0xd0820000 port 0xd0820180 irq 88
>[    1.698111] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    1.948568] pps pps0: new PPS source ptp0
>[    1.948604] igb 0000:01:00.0: added PHC on eth0
>[    1.948626] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
>[    1.948652] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:07:32:32:8b:20
>[    1.948677] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
>[    1.948699] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
>[    2.016479] usb 1-4: new high-speed USB device number 2 using xhci_hcd
>[    2.016953] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.018202] ata2.00: ATA-10: 8GB SATA Flash Drive, SFPS918A, max UDMA/133
>[    2.018238] ata2.00: 15649200 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    2.020372] ata2.00: configured for UDMA/133
>[    2.020971] scsi 1:0:0:0: Direct-Access     ATA      8GB SATA Flash D 918A PQ: 0 ANSI: 5
>[    2.028607] sd 1:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
>[    2.028661] sd 1:0:0:0: [sda] Write Protect is off
>[    2.028673] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.028741] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.030887]  sda: sda1 sda2 sda3
>[    2.031925] sd 1:0:0:0: [sda] Attached SCSI disk
>[    2.170410] usb 1-4: New USB device found, idVendor=0424, idProduct=2514
>[    2.170448] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.171559] hub 1-4:1.0: USB hub found
>[    2.171650] hub 1-4:1.0: 4 ports detected
>[    2.217077] pps pps1: new PPS source ptp1
>[    2.217113] igb 0000:02:00.0: added PHC on eth1
>[    2.217135] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
>[    2.217160] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:07:32:32:8b:21
>[    2.217185] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
>[    2.217207] igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
>[    2.222650] igb 0000:01:00.0 enp1s0: renamed from eth0
>[    2.245849] igb 0000:02:00.0 enp2s0: renamed from eth1
>[    2.352436] raid6: sse2x1   gen()   557 MB/s
>[    2.420365] raid6: sse2x1   xor()  1347 MB/s
>[    2.460459] usb 1-4.2: new high-speed USB device number 3 using xhci_hcd
>[    2.488438] raid6: sse2x2   gen()   839 MB/s
>[    2.556362] raid6: sse2x2   xor()  1599 MB/s
>[    2.560713] usb 1-4.2: New USB device found, idVendor=1a40, idProduct=0201
>[    2.560752] usb 1-4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    2.560779] usb 1-4.2: Product: USB 2.0 Hub [MTT]
>[    2.561687] hub 1-4.2:1.0: USB hub found
>[    2.561809] hub 1-4.2:1.0: 7 ports detected
>[    2.624395] raid6: sse2x4   gen()  1410 MB/s
>[    2.640466] usb 1-4.4: new full-speed USB device number 4 using xhci_hcd
>[    2.692357] raid6: sse2x4   xor()  1742 MB/s
>[    2.692367] raid6: using algorithm sse2x4 gen() 1410 MB/s
>[    2.692374] raid6: .... xor() 1742 MB/s, rmw enabled
>[    2.692381] raid6: using ssse3x2 recovery algorithm
>[    2.700257] xor: measuring software checksum speed
>[    2.740354]    prefetch64-sse:  4172.000 MB/sec
>[    2.743834] usb 1-4.4: New USB device found, idVendor=14e1, idProduct=6000
>[    2.743872] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.743899] usb 1-4.4: Product: PenMount USB
>[    2.743919] usb 1-4.4: Manufacturer: DIALOGUE INC
>[    2.756443] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.762219] usbcore: registered new interface driver usbhid
>[    2.762234] usbhid: USB HID core driver
>[    2.764109] input: DIALOGUE INC PenMount USB as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:14E1:6000.0001/input/input0
>[    2.764413] hid-penmount 0003:14E1:6000.0001: input,hidraw0: USB HID v1.01 Mouse [DIALOGUE INC PenMount USB] on usb-0000:00:14.0-4.4/input0
>[    2.780354]    generic_sse:  4104.000 MB/sec
>[    2.780364] xor: using function: prefetch64-sse (4172.000 MB/sec)
>[    2.795591] Btrfs loaded, crc32c=crc32c-intel
>[    2.848081] usb 1-4.2.3: new low-speed USB device number 5 using xhci_hcd
>[    2.926294] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
>[    2.928700] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    2.954349] usb 1-4.2.3: New USB device found, idVendor=046d, idProduct=c31c
>[    2.954367] usb 1-4.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.954388] usb 1-4.2.3: Product: USB Keyboard
>[    2.954404] usb 1-4.2.3: Manufacturer: Logitech
>[    3.044061] usb 1-4.2.4: new full-speed USB device number 6 using xhci_hcd
>[    3.127616] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    3.148229] usb 1-4.2.4: New USB device found, idVendor=096e, idProduct=0807
>[    3.148253] usb 1-4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.148268] usb 1-4.2.4: Product: USB Token
>[    3.148280] usb 1-4.2.4: Manufacturer: FS
>[    3.163857] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>[    3.164288] systemd[1]: Detected architecture x86-64.
>[    3.166425] systemd[1]: Set hostname to <panel-warszawa1-238>.
>[    3.228070] usb 1-4.2.6: new high-speed USB device number 7 using xhci_hcd
>[    3.321988] systemd[1]: Reached target Swap.
>[    3.322479] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    3.322864] systemd[1]: Listening on Journal Audit Socket.
>[    3.323189] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    3.323793] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    3.324115] systemd[1]: Listening on udev Kernel Socket.
>[    3.324406] systemd[1]: Listening on Journal Socket (/dev/log).
>[    3.329552] usb 1-4.2.6: New USB device found, idVendor=125f, idProduct=312b
>[    3.329569] usb 1-4.2.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.329581] usb 1-4.2.6: Product: ADATA USB Flash Drive
>[    3.329589] usb 1-4.2.6: Manufacturer: ADATA
>[    3.329597] usb 1-4.2.6: SerialNumber: 22B2922300020684
>[    3.378815] f71882fg: Found f81866a chip at 0xa20, revision 32
>[    3.379115] f71882fg f71882fg.2592: Fan: 1 is in duty-cycle mode
>[    3.379166] f71882fg f71882fg.2592: Fan: 2 is in duty-cycle mode
>[    3.379215] f71882fg f71882fg.2592: Fan: 3 is in duty-cycle mode
>[    3.379250] f71882fg f71882fg.2592: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    3.385766] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
>[    3.521153] loop: module loaded
>[    3.551580] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>[    3.656980] usb-storage 1-4.2.6:1.0: USB Mass Storage device detected
>[    3.693292] scsi host2: usb-storage 1-4.2.6:1.0
>[    3.693535] usbcore: registered new interface driver usb-storage
>[    3.695663] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[    3.710422] systemd-journald[155]: Received request to flush runtime journal from PID 1
>[    3.781425] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    3.781495] ACPI: Power Button [PWRB]
>[    3.781645] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>[    3.781678] ACPI: Sleep Button [SLPB]
>[    3.781812] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[    3.781849] ACPI: Power Button [PWRF]
>[    3.913700] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    3.963496] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.0/0003:046D:C31C.0002/input/input4
>[    4.020675] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-4.2.3/input0
>[    4.021211] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.1/0003:046D:C31C.0003/input/input5
>[    4.031037] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>[    4.031153] input: PC Speaker as /devices/platform/pcspkr/input/input6
>[    4.044579] EFI Variables Facility v0.08 2004-May-17
>[    4.061761] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    4.061898] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    4.062002] intel_soc_dts_thermal: request_threaded_irq ret -22
>[    4.080831] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-4.2.3/input1
>[    4.143171] pstore: using zlib compression
>[    4.143218] pstore: Registered efi as persistent store backend
>[    4.143945] [drm:i915_driver_load [i915]] No PCH found.
>[    4.144025] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00
>[    4.146008] [drm:intel_device_info_dump [i915]] i915 device info: platform=VALLEYVIEW gen=7 pciid=0x0f31 rev=0x11
>[    4.146084] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no
>[    4.146158] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: yes
>[    4.146231] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no
>[    4.146303] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: no
>[    4.146376] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes
>[    4.146449] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no
>[    4.146522] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: no
>[    4.146595] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: no
>[    4.146667] [drm:intel_device_info_dump [i915]] i915 device info: has_reset_engine: no
>[    4.146740] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: no
>[    4.146813] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: no
>[    4.146885] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes
>[    4.146974] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: no
>[    4.147047] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: yes
>[    4.147119] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no
>[    4.147192] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no
>[    4.147265] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes
>[    4.147338] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no
>[    4.147410] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: no
>[    4.147483] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: no
>[    4.147556] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_preemption: no
>[    4.147628] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no
>[    4.147701] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no
>[    4.147774] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes
>[    4.147846] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes
>[    4.147919] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no
>[    4.147992] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: no
>[    4.148065] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes
>[    4.148181] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: yes
>[    4.148254] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no
>[    4.148327] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no
>[    4.148400] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no
>[    4.148472] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no
>[    4.148545] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no
>[    4.148618] [drm:intel_device_info_dump [i915]] i915 device info: has_ipc: no
>[    4.154143] [drm:check_for_unclaimed_mmio [i915]] GTFIFODBG = 0x0810
>[    4.154447] [drm:intel_device_info_runtime_init [i915]] slice mask: 0000
>[    4.154521] [drm:intel_device_info_runtime_init [i915]] slice total: 0
>[    4.154593] [drm:intel_device_info_runtime_init [i915]] subslice total: 0
>[    4.154666] [drm:intel_device_info_runtime_init [i915]] subslice mask 0000
>[    4.154739] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 0
>[    4.154812] [drm:intel_device_info_runtime_init [i915]] EU total: 0
>[    4.154885] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 0
>[    4.154957] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n
>[    4.155030] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n
>[    4.155102] [drm:intel_device_info_runtime_init [i915]] has EU power gating: n
>[    4.155175] [drm:intel_device_info_runtime_init [i915]] CS timestamp frequency: 12500 kHz
>[    4.155248] [drm:i915_driver_load [i915]] ppgtt mode: 1
>[    4.155320] [drm:i915_driver_load [i915]] use GPU semaphores? yes
>[    4.155344] [drm] Memory usable by graphics device = 2048M
>[    4.155437] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[    4.155515] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M
>[    4.155519] [drm] Replacing VGA console driver
>[    4.155654] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 65536K
>[    4.155748] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7987c018
>[    4.155854] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[    4.155933] [drm:intel_opregion_setup [i915]] ASLE supported
>[    4.156015] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    4.160214] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    4.160230] [drm] Driver supports precise vblank timestamp query.
>[    4.160337] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz
>[    4.160421] [drm:intel_bios_init [i915]] VBT signature "$VBT VALLEYVIEW     ", BDB version 155
>[    4.160505] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    4.160587] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[    4.160671] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-19)
>[    4.160753] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[    4.160834] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[    4.160918] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[    4.160941] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    4.161023] [drm:intel_bios_init [i915]] VBT initial LVDS value 42300300
>[    4.161107] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 0, controller 0
>[    4.161189] [drm:intel_bios_init [i915]] DRRS State Enabled:0
>[    4.161286] [drm:intel_bios_init [i915]] No PSR BDB found.
>[    4.161369] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT
>[    4.162457] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[    4.162560] [drm:intel_update_rawclk [i915]] rawclk rate: 200000 kHz
>[    4.162649] [drm:intel_power_well_enable [i915]] enabling always-on
>[    4.162723] [drm:intel_power_well_enable [i915]] enabling display
>[    4.162804] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-01
>[    4.162881] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-23
>[    4.162958] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-01
>[    4.163034] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-23
>[    4.163111] [drm:intel_power_well_enable [i915]] enabling dpio-common
>[    4.163665] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
>[    4.163750] [drm:intel_modeset_init [i915]] 2 display pipes available.
>[    4.168397] [drm:intel_modeset_init [i915]] CZ clock rate: 266667 kHz
>[    4.168492] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 320000 kHz, VCO 1600000 kHz, ref 0 kHz, voltage level 2
>[    4.168575] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 400000 kHz
>[    4.168671] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 360000 kHz
>[    4.168682] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    4.170046] [drm:intel_crt_reset [i915]] crt adpa set to 0x80f40018
>[    4.170141] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
>[    4.170226] [drm:intel_dp_init_connector [i915]] using AUX B for port B (platform default)
>[    4.170324] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>[    4.170333] [drm] forcing HDMI-A-1 connector on
>[    4.170365] [drm:drm_connector_init [drm]] cmdline mode for connector HDMI-A-1 1600x900@60Hz
>[    4.170446] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (platform default)
>[    4.170543] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port C
>[    4.170628] [drm:intel_dp_init_connector [i915]] using AUX C for port C (platform default)
>[    4.170717] [drm:intel_dp_pps_init [i915]] initial power sequencer for port C: pipe B
>[    4.170802] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    4.170883] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    4.170964] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
>[    4.171043] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200
>[    4.171127] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[    4.175153] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on
>[    4.175241] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[    4.177327] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 01 00 03 01 81 00 01 00 00 08 00 00
>[    4.179133] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 00-60-37 dev-ID 3460N1 HW-rev 1.1 SW-rev 1.1 quirks 0x0000
>[    4.184488] [drm:intel_dp_init_connector [i915]] eDP DPCD: 01 85 01
>[    4.197546] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    4.197689] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
>[    4.197772] [drm:intel_dp_init_connector [i915]] using pipe B for initial backlight setup
>[    4.197856] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 50000/50000
>[    4.197943] [drm:intel_dsi_init [i915]] 
>[    4.198052] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
>[    4.198136] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe A] hw state readout: enabled
>[    4.198230] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x1
>[    4.198312] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:52:pipe B] hw state readout: enabled
>[    4.198398] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:54:CRT] hw state readout: enabled, pipe A
>[    4.198482] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:55:DP B] hw state readout: disabled, pipe A
>[    4.198567] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:59:HDMI B] hw state readout: disabled, pipe A
>[    4.198655] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP C] hw state readout: enabled, pipe B
>[    4.198764] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:63:eDP-1] hw state readout: enabled
>[    4.198866] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:53:VGA-1] hw state readout: enabled
>[    4.198966] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:56:DP-1] hw state readout: disabled
>[    4.199065] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:60:HDMI-A-1] hw state readout: disabled
>[    4.199195] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][setup_hw_state]
>[    4.199294] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2)
>[    4.199394] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[    4.199492] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    4.199587] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    4.199625] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.199707] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    4.199743] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.199835] [drm:intel_dump_pipe_config [i915]] crtc timings: 40000 800 840 968 1056 600 601 605 628, type: 0x40 flags: 0x5
>[    4.199933] [drm:intel_dump_pipe_config [i915]] port clock: 40000, pipe src size: 800x600, pixel rate 40000
>[    4.200031] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.200191] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    4.200294] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
>[    4.200387] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    4.200488] [drm:intel_dump_pipe_config [i915]] [PLANE:27:primary A] disabled, scaler_id = 0
>[    4.200581] [drm:intel_dump_pipe_config [i915]] [PLANE:30:sprite A] disabled, scaler_id = 0
>[    4.200675] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite B] disabled, scaler_id = 0
>[    4.200769] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0
>[    4.200881] [drm:intel_dump_pipe_config [i915]] [CRTC:52:pipe B][setup_hw_state]
>[    4.200980] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[    4.201075] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 18, dithering: 0
>[    4.201178] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 2271914, gmch_n: 8388608, link_m: 126217, link_n: 524288, tu: 64
>[    4.201277] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    4.201371] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    4.201404] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 64999 1024 1048 1184 1344 768 771 777 806 0x40 0x5
>[    4.201487] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    4.201522] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 64999 1024 1048 1184 1344 768 771 777 806 0x40 0x5
>[    4.201607] [drm:intel_dump_pipe_config [i915]] crtc timings: 64999 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0x5
>[    4.201708] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 800x600, pixel rate 64999
>[    4.201805] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0xa0000000, ratios: 0x0c800c80, lvds border: 0x00000000
>[    4.201902] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    4.201999] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0006000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
>[    4.202095] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    4.202192] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] disabled, scaler_id = 0
>[    4.202291] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite C] disabled, scaler_id = 0
>[    4.202384] [drm:intel_dump_pipe_config [i915]] [PLANE:46:sprite D] disabled, scaler_id = 0
>[    4.202478] [drm:intel_dump_pipe_config [i915]] [PLANE:49:cursor B] disabled, scaler_id = 0
>[    4.202581] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15
>[    4.202671] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15
>[    4.202760] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0
>[    4.212023] [drm:i9xx_get_initial_plane_config [i915]] pipe/plane A/0 with fb: size=800x600@32, offset=0, pitch 3200, size 0x1d4c00
>[    4.212147] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1d5000
>[    4.212283] [drm:intel_alloc_initial_plane_obj.isra.120 [i915]] initial plane fb obj ffff88007793fc40
>[    4.212392] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
>[    4.212497] [drm:i9xx_get_initial_plane_config [i915]] pipe/plane B/1 with fb: size=800x600@32, offset=0, pitch 3200, size 0x1d4c00
>[    4.212594] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1d5000
>[    4.212689] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space
>[    4.212794] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x1
>[    4.212895] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch (null)
>[    4.212989] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch (null)
>[    4.229013] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1d6000, 80000000]
>[    4.241532] [drm:i915_ppgtt_create [i915]] Allocated pde space (2M) at GTT entry: 7fe00
>[    4.241646] [drm:i915_ppgtt_create [i915]] Adding PPGTT at offset 7fe00000
>[    4.241754] [drm:i915_gem_contexts_init [i915]] logical context support initialized
>[    4.248687] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0x001d6000
>[    4.248792] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0x7fdfd000
>[    4.253986] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0x001f7000
>[    4.258659] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0x00218000
>[    4.258786] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000
>[    4.258884] [drm:intel_init_gt_powersave [i915]] PCBR: 0x7eefa001
>[    4.258975] [drm:vlv_init_gpll_ref_freq [i915]] GPLL reference freq: 22222 kHz
>[    4.259067] [drm:intel_init_gt_powersave [i915]] DDR speed: 1066 MHz
>[    4.259159] [drm:intel_init_gt_powersave [i915]] max GPU freq: 533 MHz (207)
>[    4.259249] [drm:intel_init_gt_powersave [i915]] RPe GPU freq: 533 MHz (207)
>[    4.259342] [drm:intel_init_gt_powersave [i915]] RP1(Guar Freq) GPU freq: 533 MHz (207)
>[    4.259433] [drm:intel_init_gt_powersave [i915]] min GPU freq: 200 MHz (192)
>[    4.259561] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0
>[    4.259763] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on
>[    4.259848] [drm:intel_enable_gt_powersave [i915]] GPLL enabled? yes
>[    4.259923] [drm:intel_enable_gt_powersave [i915]] GPU status: 0x0000cf90
>[    4.262781] [drm:intel_fbdev_init [i915]] found possible fb from plane A
>[    4.262863] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
>[    4.262946] [drm:intel_fbdev_init [i915]] pipe A area: 800x600, bpp: 32, size: 1920000
>[    4.263026] [drm:intel_fbdev_init [i915]] fb big enough for plane A (1921024 >= 1920000)
>[    4.263105] [drm:intel_fbdev_init [i915]] checking plane B for BIOS fb
>[    4.263185] [drm:intel_fbdev_init [i915]] fb not wide enough for plane B (4096 vs 3200)
>[    4.263264] [drm:intel_fbdev_init [i915]] BIOS fb not suitable for all pipes, not using
>[    4.263381] [drm:intel_dp_detect [i915]] [CONNECTOR:63:eDP-1]
>[    4.263465] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000
>[    4.263546] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    4.263625] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    4.264297] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 00-60-37 dev-ID 3460N1 HW-rev 1.1 SW-rev 1.1 quirks 0x0000
>[    4.265220] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:63:eDP-1] status updated from unknown to connected
>[    4.265317] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=0
>[    4.265402] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018
>[    4.269245] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
>[    4.269344] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-eDP-1
>[    4.271442] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
>[    4.272633] [drm] Initialized i915 1.6.0 20171109 for 0000:00:02.0 on minor 0
>[    4.272962] [drm:intel_opregion_register [i915]] 4 outputs detected
>[    4.275636] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1
>[    4.275718] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    4.275735] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:53:VGA-1] status updated from unknown to connected
>[    4.275817] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1]
>[    4.275832] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:56:DP-1] status updated from unknown to disconnected
>[    4.275913] [drm:intel_hdmi_detect [i915]] [CONNECTOR:60:HDMI-A-1]
>[    4.278046] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.278127] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.279990] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    4.280162] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.280185] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.282319] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.282400] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.284138] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.284157] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.284186] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] status updated from unknown to disconnected
>[    4.287464] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
>[    4.288560] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    4.288613] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    4.288627] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:eDP-1]
>[    4.288711] [drm:intel_dp_detect [i915]] [CONNECTOR:63:eDP-1]
>[    4.288796] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000
>[    4.288876] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    4.288956] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    4.289658] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 00-60-37 dev-ID 3460N1 HW-rev 1.1 SW-rev 1.1 quirks 0x0000
>[    4.290679] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    4.290740] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:eDP-1] probed modes :
>[    4.290762] [drm:drm_mode_debug_printmodeline [drm]] Modeline 64:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
>[    4.290773] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1]
>[    4.290869] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1
>[    4.290954] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018
>[    4.292151] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1
>[    4.292233] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    4.331138] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    4.331426] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes :
>[    4.331448] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5
>[    4.331467] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    4.331486] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    4.331506] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    4.331525] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    4.331544] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    4.331563] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    4.331582] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    4.331601] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[    4.331620] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    4.331640] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.331659] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    4.331678] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    4.331697] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    4.331708] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1]
>[    4.331803] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1]
>[    4.331818] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected
>[    4.331829] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1]
>[    4.331908] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1]
>[    4.334049] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.334130] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.336167] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.336193] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.338339] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.338421] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.340177] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.340197] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    4.340209] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] status updated from disconnected to connected
>[    4.340429] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes :
>[    4.340453] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6
>[    4.340472] [drm:drm_mode_debug_printmodeline [drm]] Modeline 90:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    4.340491] [drm:drm_mode_debug_printmodeline [drm]] Modeline 88:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.340510] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    4.340529] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    4.340548] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    4.340558] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? yes
>[    4.340566] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes
>[    4.340573] [drm:drm_setup_crtcs [drm_kms_helper]] connector 56 enabled? no
>[    4.340581] [drm:drm_setup_crtcs [drm_kms_helper]] connector 60 enabled? yes
>[    4.340676] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    4.340687] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 63
>[    4.340695] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 63 0
>[    4.340703] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1024x768
>[    4.340711] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 53
>[    4.340718] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 53 0
>[    4.340726] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900
>[    4.340733] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 60
>[    4.340741] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900
>[    4.340748] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
>[    4.340769] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 39 (0,0)
>[    4.340780] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 52 (0,0)
>[    4.340863] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
>[    4.343731] [drm:intelfb_create [i915]] allocated 1600x900 fb: 0x00240000
>[    4.345256] fbcon: inteldrmfb (fb0) is primary device
>[    4.345573] [drm:intel_atomic_check [i915]] [CONNECTOR:53:VGA-1] checking for sink bpp constrains
>[    4.345656] [drm:intel_atomic_check [i915]] clamping display bpp (was 30) to default limit of 24
>[    4.345741] [drm:intel_atomic_check [i915]] hw max bpp: 30, pipe bpp: 24, dithering: 0
>[    4.345825] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][modeset]
>[    4.345907] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2)
>[    4.345989] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[    4.346071] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    4.346152] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    4.346174] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5
>[    4.346256] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    4.346275] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5
>[    4.346360] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1600 1624 1704 1800 900 901 904 1000, type: 0x48 flags: 0x5
>[    4.346443] [drm:intel_dump_pipe_config [i915]] port clock: 108000, pipe src size: 1600x900, pixel rate 108000
>[    4.346526] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.346608] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    4.346690] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
>[    4.346772] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    4.346858] [drm:intel_dump_pipe_config [i915]] [PLANE:27:primary A] FB:70, fb = 800x600 format = XR24 little-endian (0x34325258)
>[    4.346941] [drm:intel_dump_pipe_config [i915]] [PLANE:30:sprite A] disabled, scaler_id = 0
>[    4.347023] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite B] disabled, scaler_id = 0
>[    4.347105] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0
>[    4.347191] [drm:intel_atomic_check [i915]] [CONNECTOR:60:HDMI-A-1] checking for sink bpp constrains
>[    4.347273] [drm:intel_atomic_check [i915]] clamping display bpp (was 30) to default limit of 24
>[    4.347373] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output
>[    4.347452] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpp to 24 for HDMI
>[    4.347535] [drm:intel_atomic_check [i915]] hw max bpp: 30, pipe bpp: 24, dithering: 0
>[    4.347618] [drm:intel_dump_pipe_config [i915]] [CRTC:52:pipe B][modeset]
>[    4.347701] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40)
>[    4.347783] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0
>[    4.347864] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    4.347945] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    4.347966] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6
>[    4.348047] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    4.348110] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6
>[    4.348198] [drm:intel_dump_pipe_config [i915]] crtc timings: 118963 1600 1696 1864 2128 900 901 904 932, type: 0x20 flags: 0x6
>[    4.348280] [drm:intel_dump_pipe_config [i915]] port clock: 118963, pipe src size: 1600x900, pixel rate 118963
>[    4.348363] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.348445] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    4.348528] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0006000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
>[    4.348609] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    4.348695] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] FB:70, fb = 800x600 format = XR24 little-endian (0x34325258)
>[    4.348778] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite C] disabled, scaler_id = 0
>[    4.348860] [drm:intel_dump_pipe_config [i915]] [PLANE:46:sprite D] disabled, scaler_id = 0
>[    4.348943] [drm:intel_dump_pipe_config [i915]] [PLANE:49:cursor B] disabled, scaler_id = 0
>[    4.349032] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 266667 kHz, actual 266667 kHz
>[    4.349114] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1
>[    4.349253] [drm:vlv_compute_pipe_wm [i915]] primary A watermarks: PM2=100, PM5=0, DDR DVFS=0
>[    4.349379] [drm:vlv_compute_pipe_wm [i915]] primary B watermarks: PM2=100, PM5=0, DDR DVFS=0
>[    4.350681] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled)
>[    4.350782] [drm:intel_disable_pipe [i915]] disabling pipe A
>[    4.358193] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled)
>[    4.358286] [drm:intel_edp_backlight_off [i915]] 
>[    4.394830] iTCO_vendor_support: vendor-support=0
>[    4.397176] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    4.397279] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
>[    4.398255] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    4.438973] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[    4.438978] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.438981] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.438984] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    4.438987] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    4.438991] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[    4.438994] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
>[    4.506164] snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
>[    4.506169] snd_hda_codec_generic hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.506172] snd_hda_codec_generic hdaudioC0D2:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    4.506175] snd_hda_codec_generic hdaudioC0D2:    mono: mono_out=0x0
>[    4.506178] snd_hda_codec_generic hdaudioC0D2:    dig-out=0x4/0x0
>[    4.506180] snd_hda_codec_generic hdaudioC0D2:    inputs:
>[    4.510310] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[    4.564167] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[    4.564534] [drm:intel_edp_panel_off.part.32 [i915]] Turn eDP port C panel power off
>[    4.564615] [drm:intel_edp_panel_off.part.32 [i915]] Wait for panel power off time
>[    4.564701] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status e0000003 control abcd0000
>[    4.596154] [drm:wait_panel_status [i915]] Wait complete
>[    4.596251] [drm:intel_disable_pipe [i915]] disabling pipe B
>[    4.610186] [drm:i9xx_crtc_disable [i915]] disabling pfit, current: 0xa0000000
>[    4.610271] [drm:intel_dp_link_down.isra.23 [i915]] 
>[    4.668167] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 266667 kHz, VCO 1600000 kHz, ref 0 kHz, voltage level 1
>[    4.670482] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:CRT]
>[    4.670566] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP B]
>[    4.670648] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:HDMI B]
>[    4.670730] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP C]
>[    4.670816] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:63:eDP-1]
>[    4.671148] [drm:intel_enable_pipe [i915]] enabling pipe A
>[    4.671574] [drm:intel_enable_pipe [i915]] enabling pipe B
>[    4.688494] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:53:VGA-1]
>[    4.688649] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A]
>[    4.688821] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:60:HDMI-A-1]
>[    4.688966] [drm:intel_atomic_commit_tail [i915]] [CRTC:52:pipe B]
>[    4.689044] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] 
>[    4.689056] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    4.689076] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:eDP-1]
>[    4.689217] [drm:intel_dp_detect [i915]] [CONNECTOR:63:eDP-1]
>[    4.689355] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000
>[    4.689489] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    4.689622] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    4.689761] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on
>[    4.689894] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[    4.708584] scsi 2:0:0:0: Direct-Access     ADATA    USB Flash Drive  1.00 PQ: 0 ANSI: 6
>[    4.709328] sd 2:0:0:0: Attached scsi generic sg1 type 0
>[    4.709687] sd 2:0:0:0: [sdb] 15433728 512-byte logical blocks: (7.90 GB/7.36 GiB)
>[    4.709887] sd 2:0:0:0: [sdb] Write Protect is off
>[    4.709891] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
>[    4.710066] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
>[    4.711899]  sdb: sdb1 sdb2
>[    4.713122] sd 2:0:0:0: [sdb] Attached SCSI removable disk
>[    5.216734] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000
>[    5.216936] [drm:wait_panel_status [i915]] Wait complete
>[    5.217140] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[    5.217338] [drm:edp_panel_vdd_on [i915]] eDP port C panel power wasn't enabled
>[    5.425470] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 00-60-37 dev-ID 3460N1 HW-rev 1.1 SW-rev 1.1 quirks 0x0000
>[    5.426530] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    5.426668] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:eDP-1] probed modes :
>[    5.426718] [drm:drm_mode_debug_printmodeline [drm]] Modeline 64:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
>[    5.426742] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1]
>[    5.426966] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1
>[    5.427176] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018
>[    5.439569] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1
>[    5.439769] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    5.482249] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    5.482887] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    5.482927] [drm:drm_mode_prune_invalid [drm]] Not using 1280x1024 mode: VIRTUAL_Y
>[    5.482977] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    5.483016] [drm:drm_mode_prune_invalid [drm]] Not using 1280x1024 mode: VIRTUAL_Y
>[    5.483054] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes :
>[    5.483101] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5
>[    5.483148] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    5.483195] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    5.483242] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    5.483289] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    5.483335] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    5.483382] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[    5.483428] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    5.483474] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    5.483521] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    5.483567] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    5.483614] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    5.483638] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1]
>[    5.483860] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1]
>[    5.483892] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected
>[    5.483916] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1]
>[    5.484118] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1]
>[    5.486846] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    5.487043] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    5.489719] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    5.489772] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    5.492446] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    5.492643] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    5.495293] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    5.495329] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    5.495866] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes :
>[    5.495919] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6
>[    5.495966] [drm:drm_mode_debug_printmodeline [drm]] Modeline 90:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    5.496013] [drm:drm_mode_debug_printmodeline [drm]] Modeline 88:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    5.496123] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    5.496170] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    5.496217] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    5.496238] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? yes
>[    5.496257] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes
>[    5.496274] [drm:drm_setup_crtcs [drm_kms_helper]] connector 56 enabled? no
>[    5.496292] [drm:drm_setup_crtcs [drm_kms_helper]] connector 60 enabled? yes
>[    5.496516] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    5.496541] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 63
>[    5.496560] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 63 0
>[    5.496578] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1024x768
>[    5.496595] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 53
>[    5.496613] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 53 0
>[    5.496630] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900
>[    5.496647] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 60
>[    5.496664] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900
>[    5.496683] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1600x900 config
>[    5.496736] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 39 (0,0)
>[    5.496764] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 52 (0,0)
>[    5.505643] Console: switching to colour frame buffer device 200x56
>[    5.546797] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    5.588182] broadcast[232]: segfault at ffffffffb5d1db98 ip 00007efd8d563f52 sp 00007fffcbcf66e0 error 5 in libudev.so.1.6.5[7efd8d55f000+1f000]
>[    5.692892] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    6.028292] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
>[    6.028319] br0: port 1(enp2s0) entered blocking state
>[    6.028321] br0: port 1(enp2s0) entered disabled state
>[    6.028752] device enp2s0 entered promiscuous mode
>[    6.180553] IPv6: ADDRCONF(NETDEV_UP): veth0a: link is not ready
>[    6.180569] br0: port 2(veth0a) entered blocking state
>[    6.180571] br0: port 2(veth0a) entered disabled state
>[    6.180962] device veth0a entered promiscuous mode
>[    6.232079] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
>[    6.327107] IPv6: ADDRCONF(NETDEV_CHANGE): veth0a: link becomes ready
>[    6.330838] br0: port 2(veth0a) entered blocking state
>[    6.334436] br0: port 2(veth0a) entered forwarding state
>[    6.340452] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
>[    6.584661] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
>[    6.593616] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    6.597448] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
>[    6.726309] [drm:drm_mode_addfb2 [drm]] [FB:71]
>[    6.727018] [drm:intel_framebuffer_init [i915]] No Y tiling for legacy addfb
>[    6.727042] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
>[    6.727094] [drm:intel_framebuffer_init [i915]] Unsupported tiling 0x100000000000002!
>[    6.727111] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
>[    6.727175] [drm:drm_mode_addfb2 [drm]] [FB:71]
>[    6.917671] IPv6: ADDRCONF(NETDEV_UP): veth1a: link is not ready
>[    6.935744] [drm:drm_mode_addfb2 [drm]] [FB:71]
>[    6.944766] IPv6: ADDRCONF(NETDEV_CHANGE): veth1a: link becomes ready
>[    7.399439] [drm:drm_mode_addfb2 [drm]] [FB:95]
>[    7.399587] [drm:drm_mode_setcrtc [drm]] [CRTC:39:pipe A]
>[    7.399618] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:53:VGA-1]
>[    7.405735] [drm:drm_mode_setcrtc [drm]] [CRTC:52:pipe B]
>[    7.405776] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:60:HDMI-A-1]
>[    7.608195] [drm:intel_engine_cmd_parser [i915]] CMD: Rejected register 0x00002360 in command: 0x11000001 (rcs0)
>[    7.621088] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=63, PM5=0, DDR DVFS=0
>[    7.621402] [drm:vlv_compute_pipe_wm [i915]] cursor B watermarks: PM2=63, PM5=0, DDR DVFS=0
>[    8.439165] systemd-journald[18]: Received request to flush runtime journal from PID 1
>[    8.571893] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=0, PM5=0, DDR DVFS=0
>[    8.572411] [drm:vlv_compute_pipe_wm [i915]] cursor B watermarks: PM2=0, PM5=0, DDR DVFS=0
>[    8.650118] [drm:drm_mode_addfb2 [drm]] [FB:92]
>[    8.672125] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off
>[    8.672178] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
>[    8.752636] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:eDP-1]
>[    8.752684] [drm:intel_dp_detect [i915]] [CONNECTOR:63:eDP-1]
>[    8.752729] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000
>[    8.752768] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    8.752807] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    8.752851] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on
>[    8.752890] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[    9.280812] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000
>[    9.280916] [drm:wait_panel_status [i915]] Wait complete
>[    9.281018] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[    9.281115] [drm:edp_panel_vdd_on [i915]] eDP port C panel power wasn't enabled
>[    9.489419] [drm:drm_dp_read_desc [drm_kms_helper]] DP branch: OUI 00-60-37 dev-ID 3460N1 HW-rev 1.1 SW-rev 1.1 quirks 0x0000
>[    9.490485] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    9.490622] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:eDP-1] probed modes :
>[    9.490674] [drm:drm_mode_debug_printmodeline [drm]] Modeline 64:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
>[    9.491984] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1]
>[    9.492095] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1]
>[    9.492229] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected
>[    9.492290] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1]
>[    9.492391] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1]
>[    9.494574] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    9.494670] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    9.496212] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    9.496267] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    9.498453] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    9.498549] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    9.500096] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    9.500114] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    9.500334] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes :
>[    9.500359] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6
>[    9.500379] [drm:drm_mode_debug_printmodeline [drm]] Modeline 90:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    9.500398] [drm:drm_mode_debug_printmodeline [drm]] Modeline 88:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    9.500417] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    9.500436] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    9.500455] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    9.500559] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1]
>[    9.500610] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1
>[    9.500666] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018
>[    9.507068] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1
>[    9.507109] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    9.552594] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    9.553307] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes :
>[    9.553359] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5
>[    9.553408] [drm:drm_mode_debug_printmodeline [drm]] Modeline 105:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    9.553457] [drm:drm_mode_debug_printmodeline [drm]] Modeline 100:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    9.553505] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    9.553553] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    9.553601] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    9.553648] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    9.553696] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    9.553744] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[    9.553791] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    9.553839] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    9.553886] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    9.553934] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    9.553981] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   10.180326] [drm:drm_mode_addfb2 [drm]] [FB:69]
>[   10.255042] [drm:drm_mode_addfb2 [drm]] [FB:98]
>[   12.512607] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off
>[   12.512715] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
>[   17.001054] random: crng init done

Actions: View

Attachments on bug 103779: 135517 | 135518 | 135519 | 135776 | 135777 | 135778 | 135779 | 135792 | 135793 | 135794 | 135795 | 136088

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.