Attachment 136590 Details for Bug 91845 – dmesg from boot with: "pcie_aspm=force drm.debug=0x06" on Kernel 4.14.12

dmesg from boot with: "pcie_aspm=force drm.debug=0x06" on Kernel 4.14.12

new-kernel (text/plain), 106.16 KB, created by o.freyermuth on 2018-01-07 02:12:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: o.freyermuth

Created: 2018-01-07 02:12:08 UTC

Size: 106.16 KB

patch

obsolete

>[    0.000000] microcode: microcode updated early to revision 0x22, date = 2017-01-27
>[    0.000000] Linux version 4.14.12-gentoo (root@xmg13) (gcc version 6.4.0 (Gentoo 6.4.0 p1.1)) #1 SMP Sat Jan 6 22:40:18 CET 2018
>[    0.000000] Command line: \EFI\Gentoo\vmlinuz-4.14.12-gentoo root=UUID=77ed8441-2919-4e70-802f-2df93dad2735 ro pcie_aspm=force i915.enable_fbc=1 crashkernel=128M pcie_port_pm=off initrd=EFI\Gentoo\initramfs-4.14.12-gentoo.img drm.debug=0x06
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b80a1fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b80a2000-0x00000000b80a8fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000b80a9000-0x00000000b892dfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b892e000-0x00000000b8bedfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000b8bee000-0x00000000c8c0afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000c8c0b000-0x00000000c910afff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000c910b000-0x00000000c9632fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000c9633000-0x00000000c97aafff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000c97ab000-0x00000000c9ffefff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] e820: update [mem 0xb5d2d018-0xb5d46657] usable ==> usable
>[    0.000000] e820: update [mem 0xb5d2d018-0xb5d46657] usable ==> usable
>[    0.000000] extended physical RAM map:
>[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
>[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b5d2d017] usable
>[    0.000000] reserve setup_data: [mem 0x00000000b5d2d018-0x00000000b5d46657] usable
>[    0.000000] reserve setup_data: [mem 0x00000000b5d46658-0x00000000b80a1fff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000b80a2000-0x00000000b80a8fff] ACPI NVS
>[    0.000000] reserve setup_data: [mem 0x00000000b80a9000-0x00000000b892dfff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000b892e000-0x00000000b8bedfff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000b8bee000-0x00000000c8c0afff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000c8c0b000-0x00000000c910afff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000c910b000-0x00000000c9632fff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000c9633000-0x00000000c97aafff] ACPI NVS
>[    0.000000] reserve setup_data: [mem 0x00000000c97ab000-0x00000000c9ffefff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
>[    0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000042fdfffff] usable
>[    0.000000] efi: EFI v2.31 by American Megatrends
>[    0.000000] efi:  ESRT=0xc9f56998  ACPI 2.0=0xc973b000  ACPI=0xc973b000  SMBIOS=0xc9f56598 
>[    0.000000] random: fast init done
>[    0.000000] SMBIOS 2.8 present.
>[    0.000000] DMI: Clevo W230SD                 /powered by premamod.com, BIOS 1.03.04PM v1 07/09/2015
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
>[    0.000000]   1 base 0400000000 mask 7FE0000000 write-back
>[    0.000000]   2 base 0420000000 mask 7FF0000000 write-back
>[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
>[    0.000000]   4 base 00D0000000 mask 7FF0000000 uncachable
>[    0.000000]   5 base 00CC000000 mask 7FFC000000 uncachable
>[    0.000000]   6 base 00CB000000 mask 7FFF000000 uncachable
>[    0.000000]   7 base 042FE00000 mask 7FFFE00000 uncachable
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
>[    0.000000] esrt: Reserving ESRT space from 0x00000000c9f56998 to 0x00000000c9f569d0.
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff9ae840098000] 98000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x419d61000, 0x419d61fff] PGTABLE
>[    0.000000] BRK [0x419d62000, 0x419d62fff] PGTABLE
>[    0.000000] BRK [0x419d63000, 0x419d63fff] PGTABLE
>[    0.000000] BRK [0x419d64000, 0x419d64fff] PGTABLE
>[    0.000000] BRK [0x419d65000, 0x419d65fff] PGTABLE
>[    0.000000] BRK [0x419d66000, 0x419d66fff] PGTABLE
>[    0.000000] BRK [0x419d67000, 0x419d67fff] PGTABLE
>[    0.000000] BRK [0x419d68000, 0x419d68fff] PGTABLE
>[    0.000000] BRK [0x419d69000, 0x419d69fff] PGTABLE
>[    0.000000] BRK [0x419d6a000, 0x419d6afff] PGTABLE
>[    0.000000] BRK [0x419d6b000, 0x419d6bfff] PGTABLE
>[    0.000000] BRK [0x419d6c000, 0x419d6cfff] PGTABLE
>[    0.000000] Secure boot disabled
>[    0.000000] RAMDISK: [mem 0x7ed39000-0x7fffefff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000C973B000 000024 (v02 ALASKA)
>[    0.000000] ACPI: XSDT 0x00000000C973B0A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000C974D028 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: DSDT 0x00000000C973B1F0 011E35 (v02 ALASKA A M I    00000038 INTL 20120711)
>[    0.000000] ACPI: FACS 0x00000000C97AAF80 000040
>[    0.000000] ACPI: APIC 0x00000000C974D138 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x00000000C974D1D0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FIDT 0x00000000C974D218 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: ASF! 0x00000000C974D2B8 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: SSDT 0x00000000C974D360 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20120711)
>[    0.000000] ACPI: TPM2 0x00000000C974E2F8 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
>[    0.000000] ACPI: SSDT 0x00000000C974E330 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000C974E870 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
>[    0.000000] ACPI: MCFG 0x00000000C974F348 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
>[    0.000000] ACPI: HPET 0x00000000C974F388 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
>[    0.000000] ACPI: SSDT 0x00000000C974F3C0 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000C974F6D8 001948 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
>[    0.000000] ACPI: SSDT 0x00000000C9751020 00111A (v01 SgRef  SgPeg    00001000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000C9752140 000393 (v01 CppcTa CppcTabl 00001000 INTL 20120711)
>[    0.000000] ACPI: PCCT 0x00000000C97524D8 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000C9752548 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000C9753010 001CC4 (v01 OptRef OptTabl  00001000 INTL 20120711)
>[    0.000000] ACPI: BGRT 0x00000000C9754CD8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] Reserving 128MB of memory at 768MB for crashkernel (System RAM: 16268MB)
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000042fdfffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b80a1fff]
>[    0.000000]   node   0: [mem 0x00000000b80a9000-0x00000000b892dfff]
>[    0.000000]   node   0: [mem 0x00000000b8bee000-0x00000000c8c0afff]
>[    0.000000]   node   0: [mem 0x00000000c910b000-0x00000000c9632fff]
>[    0.000000]   node   0: [mem 0x00000000c9fff000-0x00000000c9ffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000042fdfffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042fdfffff]
>[    0.000000] On node 0 totalpages: 4164617
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 12794 pages used for memmap
>[    0.000000]   DMA32 zone: 818797 pages, LIFO batch:31
>[    0.000000]   Normal zone: 52216 pages used for memmap
>[    0.000000]   Normal zone: 3341824 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x00000000cb200000-0x00000000cf1fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 44 pages/cpu @ffff9aec6fa00000 s140184 r8192 d31848 u262144
>[    0.000000] pcpu-alloc: s140184 r8192 d31848 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4099522
>[    0.000000] Kernel command line: \EFI\Gentoo\vmlinuz-4.14.12-gentoo root=UUID=77ed8441-2919-4e70-802f-2df93dad2735 ro pcie_aspm=force i915.enable_fbc=1 crashkernel=128M pcie_port_pm=off initrd=EFI\Gentoo\initramfs-4.14.12-gentoo.img drm.debug=0x06
>[    0.000000] PCIe ASPM is forcibly enabled
>[    0.000000] Setting dangerous option i915.enable_fbc - tainting kernel
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.000000] Memory: 16035596K/16658468K available (14348K kernel code, 1729K rwdata, 5028K rodata, 1260K init, 952K bss, 622872K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Kernel/User page tables isolation: enabled
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.001000] spurious 8259A interrupt: IRQ7.
>[    0.001000] tsc: Detected 2494.478 MHz processor
>[    0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.95 BogoMIPS (lpj=2494478)
>[    0.001000] pid_max: default: 32768 minimum: 301
>[    0.001000] ACPI: Core revision 20170728
>[    0.009448] ACPI: 10 ACPI AML tables successfully acquired and loaded
>[    0.009679] Security Framework initialized
>[    0.009681] SELinux:  Initializing.
>[    0.009687] SELinux:  Starting in permissive mode
>[    0.009720] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.009747] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.009903] CPU: Physical Processor ID: 0
>[    0.009905] CPU: Processor Core ID: 0
>[    0.009910] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.009911] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.009915] mce: CPU supports 9 MCE banks
>[    0.009922] CPU0: Thermal monitoring enabled (TM1)
>[    0.009934] process: using mwait in idle threads
>[    0.009937] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>[    0.009938] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.010062] Freeing SMP alternatives memory: 36K
>[    0.012909] smpboot: Max logical packages: 2
>[    0.013260] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.023273] TSC deadline timer enabled
>[    0.023276] smpboot: CPU0: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
>[    0.023320] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
>[    0.023350] ... version:                3
>[    0.023351] ... bit width:              48
>[    0.023352] ... generic registers:      4
>[    0.023353] ... value mask:             0000ffffffffffff
>[    0.023355] ... max period:             00007fffffffffff
>[    0.023356] ... fixed-purpose events:   3
>[    0.023357] ... event mask:             000000070000000f
>[    0.023381] Hierarchical SRCU implementation.
>[    0.024000] smp: Bringing up secondary CPUs ...
>[    0.024000] x86: Booting SMP configuration:
>[    0.024000] .... node  #0, CPUs:      #1
>[    0.025177] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.025180]  #2 #3 #4 #5 #6 #7
>[    0.033036] smp: Brought up 1 node, 8 CPUs
>[    0.033036] smpboot: Total of 8 processors activated (39911.64 BogoMIPS)
>[    0.034426] devtmpfs: initialized
>[    0.034426] PM: Registering ACPI NVS region [mem 0xb80a2000-0xb80a8fff] (28672 bytes)
>[    0.034426] PM: Registering ACPI NVS region [mem 0xc9633000-0xc97aafff] (1540096 bytes)
>[    0.034426] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.034426] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.034426] kworker/u16:0 (58) used greatest stack depth: 14176 bytes left
>[    0.034426] xor: automatically using best checksumming function   avx       
>[    0.035048] RTC time:  2:59:47, date: 01/07/18
>[    0.035115] NET: Registered protocol family 16
>[    0.035347] cpuidle: using governor ladder
>[    0.035347] cpuidle: using governor menu
>[    0.035347] Error parsing PCC subspaces from PCCT
>[    0.035347] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.035347] ACPI: bus type PCI registered
>[    0.035347] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.035347] PCI: Using configuration type 1 for base access
>[    0.035347] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.039031] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.039031] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.055000] raid6: sse2x1   gen() 10000 MB/s
>[    0.072006] raid6: sse2x1   xor()  7496 MB/s
>[    0.089012] raid6: sse2x2   gen() 12843 MB/s
>[    0.106018] raid6: sse2x2   xor()  8628 MB/s
>[    0.123021] raid6: sse2x4   gen() 15253 MB/s
>[    0.140024] raid6: sse2x4   xor() 10601 MB/s
>[    0.157030] raid6: avx2x1   gen() 19644 MB/s
>[    0.174032] raid6: avx2x1   xor() 14466 MB/s
>[    0.191040] raid6: avx2x2   gen() 23160 MB/s
>[    0.208042] raid6: avx2x2   xor() 16246 MB/s
>[    0.225049] raid6: avx2x4   gen() 27484 MB/s
>[    0.242051] raid6: avx2x4   xor() 19992 MB/s
>[    0.242053] raid6: using algorithm avx2x4 gen() 27484 MB/s
>[    0.242054] raid6: .... xor() 19992 MB/s, rmw enabled
>[    0.242056] raid6: using avx2x2 recovery algorithm
>[    0.243022] ACPI: Added _OSI(Module Device)
>[    0.243022] ACPI: Added _OSI(Processor Device)
>[    0.243022] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.243022] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.243022] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.247268] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.247663] ACPI: Dynamic OEM Table Load:
>[    0.247669] ACPI: SSDT 0xFFFF9AEC5D128800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
>[    0.247897] ACPI: Dynamic OEM Table Load:
>[    0.247902] ACPI: SSDT 0xFFFF9AEC5CA3B800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
>[    0.248158] ACPI: Dynamic OEM Table Load:
>[    0.248162] ACPI: SSDT 0xFFFF9AEC5C831600 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
>[    0.249233] ACPI: EC: EC started
>[    0.249235] ACPI: EC: interrupt blocked
>[    0.249502] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
>[    0.249505] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.249507] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
>[    0.249509] ACPI: Interpreter enabled
>[    0.249527] ACPI: (supports S0 S3 S5)
>[    0.249528] ACPI: Using IOAPIC for interrupt routing
>[    0.249553] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.249787] ACPI: Enabled 7 GPEs in block 00 to 3F
>[    0.256444] ACPI: Power Resource [NVP3] (on)
>[    0.256466] ACPI: Power Resource [NVP2] (on)
>[    0.258431] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.258437] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
>[    0.258548] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
>[    0.258802] PCI host bridge to bus 0000:00
>[    0.258805] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.258807] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.258809] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.258811] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
>[    0.258813] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
>[    0.258815] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
>[    0.258817] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
>[    0.258819] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
>[    0.258821] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
>[    0.258822] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
>[    0.258824] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
>[    0.258826] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
>[    0.258828] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
>[    0.258830] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
>[    0.258832] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
>[    0.258834] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
>[    0.258836] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.258843] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
>[    0.258916] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
>[    0.258941] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.259000] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
>[    0.259008] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
>[    0.259012] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.259015] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.259024] pci 0000:00:02.0: BAR 2: assigned to efifb
>[    0.259082] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
>[    0.259087] pci 0000:00:03.0: reg 0x10: [mem 0xf7c14000-0xf7c17fff 64bit]
>[    0.259166] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
>[    0.259185] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
>[    0.259235] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.259292] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
>[    0.259311] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1e000-0xf7c1e00f 64bit]
>[    0.259365] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.259430] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
>[    0.259448] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c1c000-0xf7c1c3ff]
>[    0.259520] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.259581] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
>[    0.259594] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
>[    0.259642] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.259701] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
>[    0.259755] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.259842] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
>[    0.259896] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.259980] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
>[    0.260036] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.260122] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
>[    0.260142] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b3ff]
>[    0.260215] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.260276] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
>[    0.260421] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
>[    0.260435] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
>[    0.260441] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
>[    0.260447] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
>[    0.260453] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
>[    0.260459] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
>[    0.260465] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c1a000-0xf7c1a7ff]
>[    0.260495] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.260550] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
>[    0.260565] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c19000-0xf7c190ff 64bit]
>[    0.260582] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
>[    0.260692] pci 0000:01:00.0: [10de:139b] type 00 class 0x030200
>[    0.260711] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
>[    0.260727] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.260742] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
>[    0.260752] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
>[    0.260763] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
>[    0.263012] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.263016] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>[    0.263018] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf60fffff]
>[    0.263021] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    0.263084] acpiphp: Slot [1] registered
>[    0.263091] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.263152] acpiphp: Slot [1-1] registered
>[    0.263228] pci 0000:03:00.0: [8086:08b1] type 00 class 0x028000
>[    0.263320] pci 0000:03:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit]
>[    0.264030] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>[    0.267051] pci 0000:00:1c.2: PCI bridge to [bus 03]
>[    0.267056] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
>[    0.267060] pci 0000:00:1c.2:   bridge window [mem 0xf7200000-0xf7bfffff]
>[    0.267064] pci 0000:00:1c.2:   bridge window [mem 0xf2b00000-0xf34fffff 64bit pref]
>[    0.267124] acpiphp: Slot [1-2] registered
>[    0.267206] pci 0000:04:00.0: [10ec:5287] type 00 class 0xff0000
>[    0.267238] pci 0000:04:00.0: reg 0x10: [mem 0xf6815000-0xf6815fff]
>[    0.267423] pci 0000:04:00.0: reg 0x30: [mem 0xf6800000-0xf680ffff pref]
>[    0.267682] pci 0000:04:00.0: supports D1 D2
>[    0.267683] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
>[    0.267834] pci 0000:04:00.1: [10ec:8168] type 00 class 0x020000
>[    0.267915] pci 0000:04:00.1: reg 0x10: [io  0xc000-0xc0ff]
>[    0.267967] pci 0000:04:00.1: reg 0x18: [mem 0xf6814000-0xf6814fff 64bit]
>[    0.268033] pci 0000:04:00.1: reg 0x20: [mem 0xf6810000-0xf6813fff 64bit]
>[    0.268335] pci 0000:04:00.1: supports D1 D2
>[    0.268336] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.271052] pci 0000:00:1c.3: PCI bridge to [bus 04]
>[    0.271057] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
>[    0.271061] pci 0000:00:1c.3:   bridge window [mem 0xf6800000-0xf71fffff]
>[    0.271066] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
>[    0.271083] pci_bus 0000:00: on NUMA node 0
>[    0.271790] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.271835] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.271878] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.271921] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.271969] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.272013] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.272055] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.272096] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.272456] ACPI: EC: interrupt unblocked
>[    0.272473] ACPI: EC: event unblocked
>[    0.272480] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.272482] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
>[    0.272526] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.272526] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.272526] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.272526] vgaarb: loaded
>[    0.272526] SCSI subsystem initialized
>[    0.272526] libata version 3.00 loaded.
>[    0.272526] ACPI: bus type USB registered
>[    0.272526] usbcore: registered new interface driver usbfs
>[    0.272526] usbcore: registered new interface driver hub
>[    0.272526] usbcore: registered new device driver usb
>[    0.272526] EDAC MC: Ver: 3.0.0
>[    0.272526] Registered efivars operations
>[    0.276036] Advanced Linux Sound Architecture Driver Initialized.
>[    0.276043] PCI: Using ACPI for IRQ routing
>[    0.276045] PCI: pci_cache_line_size set to 64 bytes
>[    0.276114] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.276115] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>[    0.276115] e820: reserve RAM buffer [mem 0xb5d2d018-0xb7ffffff]
>[    0.276116] e820: reserve RAM buffer [mem 0xb80a2000-0xbbffffff]
>[    0.276117] e820: reserve RAM buffer [mem 0xb892e000-0xbbffffff]
>[    0.276118] e820: reserve RAM buffer [mem 0xc8c0b000-0xcbffffff]
>[    0.276119] e820: reserve RAM buffer [mem 0xc9633000-0xcbffffff]
>[    0.276119] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
>[    0.276120] e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff]
>[    0.276196] NetLabel: Initializing
>[    0.276198] NetLabel:  domain hash size = 128
>[    0.276199] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.276211] NetLabel:  unlabeled traffic allowed by default
>[    0.276224] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.276224] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.279014] clocksource: Switched to clocksource hpet
>[    0.291044] VFS: Disk quotas dquot_6.6.0
>[    0.291063] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.291091] FS-Cache: Loaded
>[    0.291141] CacheFiles: Loaded
>[    0.292478] pnp: PnP ACPI init
>[    0.292552] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.292558] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.292683] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.292685] system 00:01: [io  0xffff] has been reserved
>[    0.292687] system 00:01: [io  0xffff] has been reserved
>[    0.292689] system 00:01: [io  0xffff] has been reserved
>[    0.292691] system 00:01: [io  0x1c00-0x1cfe] has been reserved
>[    0.292693] system 00:01: [io  0x1d00-0x1dfe] has been reserved
>[    0.292695] system 00:01: [io  0x1e00-0x1efe] has been reserved
>[    0.292696] system 00:01: [io  0x1f00-0x1ffe] has been reserved
>[    0.292698] system 00:01: [io  0x1800-0x18fe] has been reserved
>[    0.292700] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.292702] system 00:01: [io  0x3322-0x3323] has been reserved
>[    0.292706] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.292724] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.292758] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.292763] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.292782] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.292832] pnp 00:05: Plug and Play ACPI device, IDs SYN1212 PNP0f13 (active)
>[    0.292888] system 00:06: [io  0x04d0-0x04d1] has been reserved
>[    0.292893] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.293370] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.293374] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.293377] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.293379] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.293382] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.293384] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.293387] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.293389] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.293392] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
>[    0.293395] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.293397] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
>[    0.293400] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
>[    0.293406] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.293632] pnp: PnP ACPI: found 8 devices
>[    0.298167] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.298199] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.298201] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>[    0.298205] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf60fffff]
>[    0.298207] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    0.298211] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.298220] pci 0000:00:1c.2: PCI bridge to [bus 03]
>[    0.298224] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
>[    0.298228] pci 0000:00:1c.2:   bridge window [mem 0xf7200000-0xf7bfffff]
>[    0.298232] pci 0000:00:1c.2:   bridge window [mem 0xf2b00000-0xf34fffff 64bit pref]
>[    0.298238] pci 0000:00:1c.3: PCI bridge to [bus 04]
>[    0.298241] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
>[    0.298246] pci 0000:00:1c.3:   bridge window [mem 0xf6800000-0xf71fffff]
>[    0.298250] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
>[    0.298256] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.298257] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.298258] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.298259] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
>[    0.298260] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
>[    0.298261] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
>[    0.298261] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
>[    0.298262] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
>[    0.298263] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
>[    0.298264] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
>[    0.298265] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
>[    0.298266] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
>[    0.298266] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
>[    0.298267] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
>[    0.298268] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
>[    0.298269] pci_bus 0000:00: resource 19 [mem 0xcf200000-0xfeafffff window]
>[    0.298270] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>[    0.298270] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
>[    0.298271] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    0.298272] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
>[    0.298273] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf7bfffff]
>[    0.298274] pci_bus 0000:03: resource 2 [mem 0xf2b00000-0xf34fffff 64bit pref]
>[    0.298275] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
>[    0.298275] pci_bus 0000:04: resource 1 [mem 0xf6800000-0xf71fffff]
>[    0.298276] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref]
>[    0.298366] NET: Registered protocol family 2
>[    0.298466] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.298570] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.298664] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.298686] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.298712] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.298766] NET: Registered protocol family 1
>[    0.298840] RPC: Registered named UNIX socket transport module.
>[    0.298842] RPC: Registered udp transport module.
>[    0.298843] RPC: Registered tcp transport module.
>[    0.298844] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.298852] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.299233] PCI: CLS 64 bytes, default 64
>[    0.299258] Trying to unpack rootfs image as initramfs...
>[    0.548411] Freeing initrd memory: 19224K
>[    0.548455] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.548459] software IO TLB [mem 0xbef38000-0xc2f38000] (64MB) mapped at [ffff9ae8fef38000-ffff9ae902f37fff]
>[    0.548672] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[    0.548675] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    0.548676] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    0.548677] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    0.548679] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    0.549576] Scanning for low memory corruption every 60 seconds
>[    0.549610] pmd_set_huge: Cannot satisfy [mem 0xd0000000-0xd0200000] with a huge-page mapping due to MTRR override.
>[    0.549622] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x7e9000 bytes, mapped to 0xffffadbe40800000
>[    0.549625] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
>[    0.554053] Console: switching to colour frame buffer device 240x67
>[    0.558194] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
>[    0.558688] audit: initializing netlink subsys (disabled)
>[    0.558735] audit: type=2000 audit(1515293987.557:1): state=initialized audit_enabled=0 res=1
>[    0.559068] Initialise system trusted keyrings
>[    0.559088] Key type blacklist registered
>[    0.559126] workingset: timestamp_bits=46 max_order=22 bucket_order=0
>[    0.560032] zbud: loaded
>[    0.560349] FS-Cache: Netfs 'nfs' registered for caching
>[    0.560445] NFS: Registering the id_resolver key type
>[    0.560465] Key type id_resolver registered
>[    0.560480] Key type id_legacy registered
>[    0.560522] fuse init (API version 7.26)
>[    0.560666] orangefs_debugfs_init: called with debug mask: :none: :0:
>[    0.560713] orangefs_init: module version upstream loaded
>[    0.560780] ocfs2: Registered cluster interface o2cb
>[    0.560837] OCFS2 User DLM kernel interface loaded
>[    0.561035] SELinux:  Registering netfilter hooks
>[    0.563018] async_tx: api initialized (async)
>[    0.563040] Key type asymmetric registered
>[    0.563058] Asymmetric key parser 'x509' registered
>[    0.563107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.563170] io scheduler noop registered
>[    0.563188] io scheduler deadline registered
>[    0.563246] io scheduler cfq registered (default)
>[    0.563267] io scheduler mq-deadline registered
>[    0.563287] io scheduler kyber registered
>[    0.563325] io scheduler bfq registered
>[    0.563885] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.564469] Non-volatile memory driver v1.3
>[    0.564512] Linux agpgart interface v0.103
>[    0.564586] intel_idle: MWAIT substates: 0x42120
>[    0.564587] intel_idle: v0.4.1 model 0x3C
>[    0.564843] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.565426] ACPI: AC Adapter [AC] (on-line)
>[    0.565501] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>[    0.565548] ACPI: Power Button [PWRB]
>[    0.565593] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>[    0.565634] ACPI: Sleep Button [SLPB]
>[    0.565701] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
>[    0.565760] ACPI: Lid Switch [LID0]
>[    0.565805] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[    0.566839] ACPI: Power Button [PWRF]
>[    0.568195] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    0.569223] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.570185] ACPI: Thermal Zone [TZ0] (52 C)
>[    0.571629] [drm:i915_driver_load] Found LynxPoint PCH
>[    0.571632] [drm:intel_power_domains_init] Allowed DC state mask 00
>[    0.571672] [drm:intel_device_info_dump] i915 device info: platform=HASWELL gen=7 pciid=0x0416 rev=0x06
>[    0.571673] [drm:intel_device_info_dump] i915 device info: is_mobile: no
>[    0.571674] [drm:intel_device_info_dump] i915 device info: is_lp: no
>[    0.571675] [drm:intel_device_info_dump] i915 device info: is_alpha_support: no
>[    0.571676] [drm:intel_device_info_dump] i915 device info: has_64bit_reloc: no
>[    0.571677] [drm:intel_device_info_dump] i915 device info: has_aliasing_ppgtt: yes
>[    0.571677] [drm:intel_device_info_dump] i915 device info: has_csr: no
>[    0.571678] [drm:intel_device_info_dump] i915 device info: has_ddi: yes
>[    0.571679] [drm:intel_device_info_dump] i915 device info: has_dp_mst: yes
>[    0.571680] [drm:intel_device_info_dump] i915 device info: has_reset_engine: no
>[    0.571681] [drm:intel_device_info_dump] i915 device info: has_fbc: yes
>[    0.571682] [drm:intel_device_info_dump] i915 device info: has_fpga_dbg: yes
>[    0.571682] [drm:intel_device_info_dump] i915 device info: has_full_ppgtt: yes
>[    0.571683] [drm:intel_device_info_dump] i915 device info: has_full_48bit_ppgtt: no
>[    0.571684] [drm:intel_device_info_dump] i915 device info: has_gmbus_irq: yes
>[    0.571685] [drm:intel_device_info_dump] i915 device info: has_gmch_display: no
>[    0.571686] [drm:intel_device_info_dump] i915 device info: has_guc: no
>[    0.571687] [drm:intel_device_info_dump] i915 device info: has_guc_ct: no
>[    0.571687] [drm:intel_device_info_dump] i915 device info: has_hotplug: yes
>[    0.571688] [drm:intel_device_info_dump] i915 device info: has_l3_dpf: yes
>[    0.571689] [drm:intel_device_info_dump] i915 device info: has_llc: yes
>[    0.571690] [drm:intel_device_info_dump] i915 device info: has_logical_ring_contexts: no
>[    0.571705] [drm:intel_device_info_dump] i915 device info: has_overlay: no
>[    0.571705] [drm:intel_device_info_dump] i915 device info: has_pipe_cxsr: no
>[    0.571706] [drm:intel_device_info_dump] i915 device info: has_pooled_eu: no
>[    0.571707] [drm:intel_device_info_dump] i915 device info: has_psr: yes
>[    0.571708] [drm:intel_device_info_dump] i915 device info: has_rc6: yes
>[    0.571709] [drm:intel_device_info_dump] i915 device info: has_rc6p: no
>[    0.571710] [drm:intel_device_info_dump] i915 device info: has_resource_streamer: yes
>[    0.571711] [drm:intel_device_info_dump] i915 device info: has_runtime_pm: yes
>[    0.571711] [drm:intel_device_info_dump] i915 device info: has_snoop: no
>[    0.571712] [drm:intel_device_info_dump] i915 device info: unfenced_needs_alignment: no
>[    0.571723] [drm:intel_device_info_dump] i915 device info: cursor_needs_physical: no
>[    0.571724] [drm:intel_device_info_dump] i915 device info: hws_needs_physical: no
>[    0.571725] [drm:intel_device_info_dump] i915 device info: overlay_needs_physical: no
>[    0.571726] [drm:i915_driver_load] i915 device info: supports_tv: no
>[    0.571752] ACPI: Battery Slot [BAT0] (battery present)
>[    0.571779] [drm:intel_device_info_runtime_init] slice mask: 0000
>[    0.571780] [drm:intel_device_info_runtime_init] slice total: 0
>[    0.571781] [drm:intel_device_info_runtime_init] subslice total: 0
>[    0.571782] [drm:intel_device_info_runtime_init] subslice mask 0000
>[    0.571782] [drm:intel_device_info_runtime_init] subslice per slice: 0
>[    0.571783] [drm:intel_device_info_runtime_init] EU total: 0
>[    0.571784] [drm:intel_device_info_runtime_init] EU per subslice: 0
>[    0.571785] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    0.571786] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    0.571787] [drm:i915_driver_load] has EU power gating: n
>[    0.571788] [drm:i915_driver_load] ppgtt mode: 1
>[    0.571789] [drm:i915_driver_load] use GPU semaphores? yes
>[    0.571797] [drm] Memory usable by graphics device = 2048M
>[    0.571799] [drm:i915_ggtt_probe_hw] GMADR size = 256M
>[    0.571800] [drm:i915_ggtt_probe_hw] GTT stolen size = 64M
>[    0.571801] checking generic (d0000000 7e9000) vs hw (d0000000 10000000)
>[    0.571801] fb: switching to inteldrmfb from simple
>[    0.574620] Console: switching to colour dummy device 80x25
>[    0.574785] [drm] Replacing VGA console driver
>[    0.574986] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K
>[    0.574992] [drm:intel_opregion_setup] graphic opregion physical addr: 0xc978f018
>[    0.574999] [drm:intel_opregion_setup] Public ACPI methods supported
>[    0.575000] [drm:intel_opregion_setup] SWSCI supported
>[    0.581080] [drm:intel_opregion_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    0.581082] [drm:intel_opregion_setup] ASLE supported
>[    0.581083] [drm:intel_opregion_setup] ASLE extension supported
>[    0.581085] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    0.581123] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    0.581127] [drm] Driver supports precise vblank timestamp query.
>[    0.581130] [drm:intel_bios_init] Set default to SSC at 120000 kHz
>[    0.581132] [drm:intel_bios_init] VBT signature "$VBT HASWELL        ", BDB version 189
>[    0.581135] [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    0.581136] [drm:intel_bios_init] crt_ddc_bus_pin: 0
>[    0.583192] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0)
>[    0.583195] [drm:intel_bios_init] Panel type: 15 (VBT)
>[    0.583197] [drm:intel_bios_init] DRRS supported mode is static
>[    0.583200] [drm:intel_bios_init] Found panel mode in BIOS VBT tables:
>[    0.583202] [drm:drm_mode_debug_printmodeline] Modeline 0:"2048x1536" 0 164250 2048 2064 2080 2144 1536 1537 1538 1555 0x8 0xa
>[    0.583205] [drm:intel_bios_init] VBT backlight PWM modulation frequency 1000 Hz, active high, min brightness 26, level 80, controller 0
>[    0.583207] [drm:intel_bios_init] Found SDVO panel mode in BIOS VBT tables:
>[    0.583209] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    0.583210] [drm:intel_bios_init] No SDVO device info is found in VBT
>[    0.583212] [drm:intel_bios_init] DRRS State Enabled:0
>[    0.583214] [drm:intel_bios_init] VBT has unknown eDP link rate value 2
>[    0.583216] [drm:intel_bios_init] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    0.583218] [drm:intel_bios_init] VBT HDMI level shift for port A: 0
>[    0.583220] [drm:intel_bios_init] Port C VBT info: DP:1 HDMI:0 DVI:0 EDP:0 CRT:0
>[    0.583221] [drm:intel_bios_init] VBT HDMI level shift for port C: 3
>[    0.583223] [drm:intel_bios_init] Port D VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    0.583224] [drm:intel_bios_init] VBT HDMI level shift for port D: 6
>[    0.583234] [drm:intel_dsm_detect] no _DSM method for intel device
>[    0.583239] [drm:i915_driver_load] rawclk rate: 125000 kHz
>[    0.583244] [drm:intel_power_well_enable] enabling always-on
>[    0.583246] [drm:intel_power_well_enable] enabling display
>[    0.583251] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    0.583453] [drm:intel_fbc_init] Sanitized enable_fbc value: 1
>[    0.583456] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    0.583458] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
>[    0.583460] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
>[    0.583461] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
>[    0.583463] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    0.583465] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    0.583466] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
>[    0.583468] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
>[    0.583469] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
>[    0.583471] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    0.583473] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    0.583474] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
>[    0.583476] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
>[    0.583477] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
>[    0.583479] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    0.583482] [drm:intel_modeset_init] 3 display pipes available.
>[    0.583509] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz, VCO: 0 kHz, ref: 0 kHz
>[    0.583554] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz
>[    0.583556] [drm:intel_modeset_init] Max dotclock rate: 540000 kHz
>[    0.583864] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    0.583868] [drm:intel_dp_init_connector] using AUX A for port A (VBT)
>[    0.583878] [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
>[    0.583880] [drm:intel_pps_dump_state] vbt t1_t3 3000 t8 1000 t9 12000 t10 500 t11_t12 6000
>[    0.583882] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 300, power down delay 50, power cycle delay 600
>[    0.583884] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 100, off delay 1200
>[    0.583892] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0xbb80001, PP_OFF 0x1f40001, PP_DIV 0x186906
>[    0.583898] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    0.583906] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[    0.584327] [drm:intel_dp_read_dpcd] DPCD: 12 0a 82 41 00 00 01 00 b3 00 00 00 00 0b 00
>[    0.584716] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    0.585338] [drm:intel_dp_init_connector] EDP DPCD : 01 18 00
>[    0.588737] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    0.588739] [drm:intel_dp_init_connector] VBT doesn't support DRRS
>[    0.588747] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 306/976
>[    0.588755] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    0.588757] [drm:intel_dp_init_connector] using AUX C for port C (VBT)
>[    0.588762] [drm:intel_hdmi_init_connector] Adding HDMI connector on port D
>[    0.588764] [drm:intel_hdmi_init_connector] Using DDC pin 0x6 for port D (VBT)
>[    0.588793] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x1
>[    0.588794] [drm:intel_modeset_setup_hw_state] [CRTC:36:pipe A] hw state readout: enabled
>[    0.588796] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
>[    0.588797] [drm:intel_modeset_setup_hw_state] [CRTC:46:pipe B] hw state readout: disabled
>[    0.588799] [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
>[    0.588800] [drm:intel_modeset_setup_hw_state] [CRTC:56:pipe C] hw state readout: disabled
>[    0.588803] [drm:intel_modeset_setup_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    0.588804] [drm:intel_modeset_setup_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    0.588806] [drm:intel_modeset_setup_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0
>[    0.588807] [drm:intel_modeset_setup_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[    0.588808] [drm:intel_modeset_setup_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000001, on 1
>[    0.588809] [drm:intel_modeset_setup_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[    0.588813] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
>[    0.588815] [drm:intel_modeset_setup_hw_state] [ENCODER:57:DDI A] hw state readout: enabled, pipe A
>[    0.588816] [drm:intel_modeset_setup_hw_state] [ENCODER:67:DDI C] hw state readout: disabled, pipe A
>[    0.588818] [drm:intel_modeset_setup_hw_state] [ENCODER:69:DP-MST A] hw state readout: disabled, pipe A
>[    0.588819] [drm:intel_modeset_setup_hw_state] [ENCODER:70:DP-MST B] hw state readout: disabled, pipe B
>[    0.588820] [drm:intel_modeset_setup_hw_state] [ENCODER:71:DP-MST C] hw state readout: disabled, pipe C
>[    0.588822] [drm:intel_modeset_setup_hw_state] [ENCODER:72:DDI D] hw state readout: disabled, pipe A
>[    0.588824] [drm:intel_modeset_setup_hw_state] [CONNECTOR:58:eDP-1] hw state readout: enabled
>[    0.588826] [drm:intel_modeset_setup_hw_state] [CONNECTOR:68:DP-1] hw state readout: disabled
>[    0.588827] [drm:intel_modeset_setup_hw_state] [CONNECTOR:73:HDMI-A-1] hw state readout: disabled
>[    0.588836] [drm:intel_dump_pipe_config] [CRTC:36:pipe A][setup_hw_state]
>[    0.588837] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    0.588839] [drm:intel_dump_m_n_config.isra.49] dp m_n: lanes: 2; gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    0.588840] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.588840] [drm:intel_dump_pipe_config] requested mode:
>[    0.588842] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138779 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    0.588843] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.588844] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138779 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    0.588846] [drm:intel_dump_pipe_config] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x40 flags: 0xa
>[    0.588847] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1920x1080, pixel rate 138779
>[    0.588848] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.588849] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.588850] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    0.588850] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.588851] [drm:intel_dump_pipe_config] [PLANE:27:primary A] disabled, scaler_id = 0
>[    0.588852] [drm:intel_dump_pipe_config] [PLANE:30:sprite A] disabled, scaler_id = 0
>[    0.588853] [drm:intel_dump_pipe_config] [PLANE:33:cursor A] disabled, scaler_id = 0
>[    0.588854] [drm:intel_dump_pipe_config] [CRTC:46:pipe B][setup_hw_state]
>[    0.588855] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[    0.588856] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.588857] [drm:intel_dump_pipe_config] requested mode:
>[    0.588858] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.588859] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.588860] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.588862] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    0.588863] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    0.588864] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.588865] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.588865] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    0.588866] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.588867] [drm:intel_dump_pipe_config] [PLANE:37:primary B] disabled, scaler_id = 0
>[    0.588868] [drm:intel_dump_pipe_config] [PLANE:40:sprite B] disabled, scaler_id = 0
>[    0.588869] [drm:intel_dump_pipe_config] [PLANE:43:cursor B] disabled, scaler_id = 0
>[    0.588870] [drm:intel_dump_pipe_config] [CRTC:56:pipe C][setup_hw_state]
>[    0.588871] [drm:intel_dump_pipe_config] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[    0.588872] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.588872] [drm:intel_dump_pipe_config] requested mode:
>[    0.588874] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.588874] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.588876] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.588877] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    0.588878] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    0.588879] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.588880] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.588880] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    0.588881] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.588882] [drm:intel_dump_pipe_config] [PLANE:47:primary C] disabled, scaler_id = 0
>[    0.588883] [drm:intel_dump_pipe_config] [PLANE:50:sprite C] disabled, scaler_id = 0
>[    0.588884] [drm:intel_dump_pipe_config] [PLANE:53:cursor C] disabled, scaler_id = 0
>[    0.588885] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling
>[    0.588887] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling
>[    0.588891] [drm:intel_power_well_disable] disabling display
>[    0.588895] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    0.588897] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    0.588906] [drm:intel_alloc_initial_plane_obj.isra.81] initial plane fb obj ffff9aec5cabde40
>[    0.588916] [drm:intel_modeset_init] pipe A active planes 0x1
>[    0.588985] [drm:i915_gem_init_ggtt] clearing unused GTT space: [7ea000, 80000000]
>[    0.590027] [drm:i915_ppgtt_create] Allocated pde space (2M) at GTT entry: 7fe00
>[    0.590029] [drm:i915_ppgtt_create] Adding PPGTT at offset 7fe00000
>[    0.590032] [drm:i915_gem_contexts_init] logical context support initialized
>[    0.590210] [drm:intel_init_ring_buffer] rcs0 hws offset: 0x007ea000
>[    0.590215] [drm:intel_engine_create_scratch] rcs0 pipe control offset: 0x7fdee000
>[    0.590329] [drm:intel_init_ring_buffer] bcs0 hws offset: 0x0080b000
>[    0.590478] [drm:intel_init_ring_buffer] vcs0 hws offset: 0x0082c000
>[    0.590557] [drm:intel_init_ring_buffer] vecs0 hws offset: 0x0084d000
>[    0.590576] [drm:init_workarounds_ring] rcs0: Number of context specific w/a: 0
>[    0.590606] [drm:sandybridge_pcode_read] warning: pcode (read from mbox 1a) mailbox access failed for intel_init_gt_powersave: -6
>[    0.590609] [drm:intel_init_gt_powersave] Overclocking supported, max: 1150MHz, overclock: 1150MHz
>[    0.590611] [drm:intel_fbdev_init] found possible fb from plane A
>[    0.590613] [drm:intel_fbdev_init] pipe B not active or no fb, skipping
>[    0.590614] [drm:intel_fbdev_init] pipe C not active or no fb, skipping
>[    0.590615] [drm:intel_fbdev_init] checking plane A for BIOS fb
>[    0.590616] [drm:intel_fbdev_init] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    0.590618] [drm:intel_fbdev_init] fb big enough for plane A (8294400 >= 8294400)
>[    0.590619] [drm:intel_fbdev_init] pipe B not active, skipping
>[    0.590620] [drm:intel_fbdev_init] pipe C not active, skipping
>[    0.590621] [drm:intel_fbdev_init] using BIOS fb for initial console
>[    0.590633] [drm:intel_dp_detect] [CONNECTOR:58:eDP-1]
>[    0.590635] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no
>[    0.590637] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[    0.590638] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    0.590639] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    0.590848] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    0.590854] [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1
>[    0.590907] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-1
>[    0.590956] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
>[    0.591036] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    0.591093] [drm:intel_opregion_register] 3 outputs detected
>[    0.591137] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>[    0.591167] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
>[    0.591372] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:52/LNXVIDEO:00/input/input4
>[    0.591439] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    0.591636] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
>[    0.591666] [drm:drm_setup_crtcs] 
>[    0.591758] [drm:drm_helper_hpd_irq_event] [CONNECTOR:58:eDP-1] status updated from unknown to connected
>[    0.591762] [drm:intel_dp_detect] [CONNECTOR:68:DP-1]
>[    0.591766] [drm:drm_helper_hpd_irq_event] [CONNECTOR:68:DP-1] status updated from unknown to disconnected
>[    0.591780] [drm:intel_hdmi_detect] [CONNECTOR:73:HDMI-A-1]
>[    0.593022] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    0.593023] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    0.593998] brd: module loaded
>[    0.595017] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    0.595020] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    0.595240] loop: module loaded
>[    0.596562] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
>[    0.596571] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    0.596576] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
>[    0.596582] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR2) (20170728/utaddress-247)
>[    0.596588] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)
>[    0.596595] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    0.596598] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
>[    0.596604] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
>[    0.596611] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR2) (20170728/utaddress-247)
>[    0.596617] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)
>[    0.596622] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    0.596625] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
>[    0.596629] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
>[    0.596634] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR2) (20170728/utaddress-247)
>[    0.596639] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170728/utaddress-247)
>[    0.596645] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    0.596647] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    0.596749] ahci 0000:00:1f.2: version 3.0
>[    0.596868] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    0.596891] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
>[    0.596895] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
>[    0.597023] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    0.597024] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    0.599048] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    0.599052] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[    0.599055] [drm:drm_helper_hpd_irq_event] [CONNECTOR:73:HDMI-A-1] status updated from unknown to disconnected
>[    0.599064] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:eDP-1]
>[    0.599068] [drm:intel_dp_detect] [CONNECTOR:58:eDP-1]
>[    0.599071] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no
>[    0.599073] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[    0.599075] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    0.599077] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    0.599470] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    0.600130] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    0.600146] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:eDP-1] probed modes :
>[    0.600149] [drm:drm_mode_debug_printmodeline] Modeline 59:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    0.600150] [drm:drm_mode_debug_printmodeline] Modeline 60:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    0.600152] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:DP-1]
>[    0.600154] [drm:intel_dp_detect] [CONNECTOR:68:DP-1]
>[    0.600157] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:DP-1] disconnected
>[    0.600159] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-1]
>[    0.600160] [drm:intel_hdmi_detect] [CONNECTOR:73:HDMI-A-1]
>[    0.600547] scsi host0: ahci
>[    0.600639] scsi host1: ahci
>[    0.600714] scsi host2: ahci
>[    0.600798] scsi host3: ahci
>[    0.600881] scsi host4: ahci
>[    0.600964] scsi host5: ahci
>[    0.600993] ata1: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a100 irq 26
>[    0.600996] ata2: DUMMY
>[    0.600997] ata3: DUMMY
>[    0.600998] ata4: DUMMY
>[    0.601000] ata5: DUMMY
>[    0.601009] ata6: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a380 irq 26
>[    0.601079] tun: Universal TUN/TAP device driver, 1.6
>[    0.601141] VFIO - User Level meta-driver version: 0.3
>[    0.601244] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.601248] ehci-pci: EHCI PCI platform driver
>[    0.601333] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.601368] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.601380] ehci-pci 0000:00:1a.0: debug port 2
>[    0.602023] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    0.602024] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    0.604032] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    0.604034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    0.605293] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.605300] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c1c000
>[    0.606040] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    0.606042] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    0.608050] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    0.608054] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[    0.608056] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-1] disconnected
>[    0.608057] [drm:drm_setup_crtcs] connector 58 enabled? yes
>[    0.608058] [drm:drm_setup_crtcs] connector 68 enabled? no
>[    0.608059] [drm:drm_setup_crtcs] connector 73 enabled? no
>[    0.608063] [drm:intel_fb_initial_config] Not using firmware configuration
>[    0.608064] [drm:drm_setup_crtcs] looking for cmdline mode on connector 58
>[    0.608065] [drm:drm_setup_crtcs] looking for preferred mode on connector 58 0
>[    0.608066] [drm:drm_setup_crtcs] found mode 1920x1080
>[    0.608067] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[    0.608070] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0)
>[    0.608073] [drm:intelfb_create] re-using BIOS fb
>[    0.608078] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000
>[    0.608194] fbcon: inteldrmfb (fb0) is primary device
>[    0.608257] [drm:intel_atomic_check] [CONNECTOR:58:eDP-1] checking for sink bpp constrains
>[    0.608259] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 24
>[    0.608263] [drm:drm_mode_debug_printmodeline] Modeline 63:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    0.608265] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 92520KHz
>[    0.608275] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[    0.608276] [drm:intel_dp_compute_config] DP link bw required 277560 available 540000
>[    0.608279] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    0.608280] [drm:intel_dump_pipe_config] [CRTC:36:pipe A][modeset]
>[    0.608282] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    0.608284] [drm:intel_dump_m_n_config.isra.49] dp m_n: lanes: 2; gmch_m: 4311744, gmch_n: 8388608, link_m: 179656, link_n: 524288, tu: 64
>[    0.608285] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.608286] [drm:intel_dump_pipe_config] requested mode:
>[    0.608288] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    0.608288] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.608290] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    0.608292] [drm:intel_dump_pipe_config] crtc timings: 92520 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x40 flags: 0xa
>[    0.608293] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1920x1080, pixel rate 92520
>[    0.608295] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.608296] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.608297] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    0.608298] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.608300] [drm:intel_dump_pipe_config] [PLANE:27:primary A] FB:76, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[    0.608301] [drm:intel_dump_pipe_config] [PLANE:30:sprite A] disabled, scaler_id = 0
>[    0.608302] [drm:intel_dump_pipe_config] [PLANE:33:cursor A] disabled, scaler_id = 0
>[    0.608308] [drm:intel_reference_shared_dpll] using LCPLL 1350 for pipe A
>[    0.608321] [drm:intel_edp_backlight_off] 
>[    0.612090] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.612148] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.612149] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.612150] usb usb1: Product: EHCI Host Controller
>[    0.612151] usb usb1: Manufacturer: Linux 4.14.12-gentoo ehci_hcd
>[    0.612152] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.612364] hub 1-0:1.0: USB hub found
>[    0.612369] hub 1-0:1.0: 2 ports detected
>[    0.612613] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.612714] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.612737] ehci-pci 0000:00:1d.0: debug port 2
>[    0.616647] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.616655] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c1b000
>[    0.623083] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.623136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.623137] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.623138] usb usb2: Product: EHCI Host Controller
>[    0.623139] usb usb2: Manufacturer: Linux 4.14.12-gentoo ehci_hcd
>[    0.623140] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.623349] hub 2-0:1.0: USB hub found
>[    0.623354] hub 2-0:1.0: 2 ports detected
>[    0.623490] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.623494] ohci-pci: OHCI PCI platform driver
>[    0.623505] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.623633] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.623732] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    0.624821] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    0.624825] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    0.624892] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.624893] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.624894] usb usb3: Product: xHCI Host Controller
>[    0.624895] usb usb3: Manufacturer: Linux 4.14.12-gentoo xhci-hcd
>[    0.624896] usb usb3: SerialNumber: 0000:00:14.0
>[    0.625047] hub 3-0:1.0: USB hub found
>[    0.625061] hub 3-0:1.0: 14 ports detected
>[    0.626446] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.626521] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    0.626579] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    0.626580] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.626581] usb usb4: Product: xHCI Host Controller
>[    0.626581] usb usb4: Manufacturer: Linux 4.14.12-gentoo xhci-hcd
>[    0.626582] usb usb4: SerialNumber: 0000:00:14.0
>[    0.626688] hub 4-0:1.0: USB hub found
>[    0.626707] hub 4-0:1.0: 6 ports detected
>[    0.627129] usbcore: registered new interface driver uas
>[    0.627157] usbcore: registered new interface driver usb-storage
>[    0.627194] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SENM] at 0x60,0x64 irq 1,12
>[    0.909450] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.909737] ata1.00: supports DRM functions and may not be fully accessible
>[    0.910943] ata1.00: ATA-10: Crucial_CT500MX200SSD3, MU04, max UDMA/133
>[    0.910944] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    0.914872] ata1.00: supports DRM functions and may not be fully accessible
>[    0.919773] ata1.00: configured for UDMA/133
>[    0.938040] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    0.946039] usb 3-6: new full-speed USB device number 2 using xhci_hcd
>[    0.946054] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.066477] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
>[    1.066479] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.066636] hub 1-1:1.0: USB hub found
>[    1.066726] hub 1-1:1.0: 6 ports detected
>[    1.074380] usb 3-6: New USB device found, idVendor=046d, idProduct=c52b
>[    1.074381] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.074382] usb 3-6: Product: USB Receiver
>[    1.074383] usb 3-6: Manufacturer: Logitech
>[    1.074506] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
>[    1.074507] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.074728] hub 2-1:1.0: USB hub found
>[    1.074837] hub 2-1:1.0: 8 ports detected
>[    1.157021] i8042: Detected active multiplexing controller, rev 1.1
>[    1.159038] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.159041] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    1.159081] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    1.159094] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    1.159117] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    1.159205] mousedev: PS/2 mouse device common for all mice
>[    1.159418] usbcore: registered new interface driver synaptics_usb
>[    1.159429] rtc_cmos 00:02: RTC can wake from S4
>[    1.159562] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.159583] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.159593] i2c /dev entries driver
>[    1.159986] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    1.161065] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    1.161084] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[    1.161180] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    1.161235] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
>[    1.161418] device-mapper: uevent: version 1.0.3
>[    1.161474] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
>[    1.161585] device-mapper: multipath round-robin: version 1.2.0 loaded
>[    1.161586] device-mapper: multipath queue-length: version 0.2.0 loaded
>[    1.161587] device-mapper: multipath service-time: version 0.3.0 loaded
>[    1.161595] device-mapper: raid: Loading target version 1.13.0
>[    1.161722] EDAC ie31200: No ECC support
>[    1.161763] intel_pstate: Intel P-state driver initializing
>[    1.162188] ledtrig-cpu: registered to indicate activity on CPUs
>[    1.162523] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
>[    1.162732] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    1.162754] EFI Variables Facility v0.08 2004-May-17
>[    1.169639] pstore: using zlib compression
>[    1.169645] pstore: Registered efi as persistent store backend
>[    1.169809] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.174538] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2
>[    1.189097] usb 3-7: new full-speed USB device number 3 using xhci_hcd
>[    1.278178] usbcore: registered new interface driver usbhid
>[    1.278179] usbhid: USB HID core driver
>[    1.278272] alienware_wmi: alienware-wmi: No known WMI GUID found
>[    1.278700] usbcore: registered new interface driver snd-usb-audio
>[    1.278733] Netfilter messages via NETLINK v0.30.
>[    1.278737] nfnl_acct: registering with nfnetlink.
>[    1.278916] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
>[    1.278997] ctnetlink v0.93: registering with nfnetlink.
>[    1.279079] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
>[    1.279083] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
>[    1.279142] xt_time: kernel timezone is -0000
>[    1.279144] ip_set: protocol 6
>[    1.279301] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.279954] arp_tables: arp_tables: (C) 2002 David S. Miller
>[    1.280116] Initializing XFRM netlink socket
>[    1.280289] NET: Registered protocol family 10
>[    1.286812] Segment Routing with IPv6
>[    1.286850] mip6: Mobile IPv6
>[    1.286873] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    1.287102] input: Logitech M705 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input11
>[    1.287357] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-6:1
>[    1.287757] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
>[    1.288130] NET: Registered protocol family 17
>[    1.288278] Key type dns_resolver registered
>[    1.289086] microcode: sig=0x306c3, pf=0x10, revision=0x22
>[    1.289215] microcode: Microcode Update Driver: v2.2.
>[    1.289226] sched_clock: Marking stable (1289209538, 0)->(1303005236, -13795698)
>[    1.289425] registered taskstats version 1
>[    1.289431] Loading compiled-in X.509 certificates
>[    1.289451] zswap: loaded using pool lzo/zbud
>[    1.289800] Btrfs loaded, crc32c=crc32c-intel
>[    1.291614] Key type encrypted registered
>[    1.292050]   Magic number: 2:146:965
>[    1.292204] rtc_cmos 00:02: setting system clock to 2018-01-07 02:59:48 UTC (1515293988)
>[    1.292261] ALSA device list:
>[    1.292262]   No soundcards found.
>[    1.316364] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc
>[    1.316368] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.431057] usb 3-8: new high-speed USB device number 4 using xhci_hcd
>[    1.567058] tsc: Refined TSC clocksource calibration: 2494.225 MHz
>[    1.567070] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ea95b09, max_idle_ns: 440795287034 ns
>[    1.610546] usb 3-8: New USB device found, idVendor=5986, idProduct=055c
>[    1.610549] usb 3-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    1.610551] usb 3-8: Product: BisonCam, NB Pro
>[    1.610553] usb 3-8: Manufacturer: Generic
>[    1.610554] usb 3-8: SerialNumber: 200901010001
>[    1.695098] [drm:intel_enable_gt_powersave] Enabling RC6 states: RC6 on
>[    1.695113] [drm:sandybridge_pcode_read] warning: pcode (read from mbox 5) mailbox access failed for intel_enable_gt_powersave: -6
>[    1.823031] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.823037] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling
>[    1.823051] [drm:intel_disable_pipe] disabling pipe A
>[    1.839572] [drm:intel_edp_panel_off] Turn eDP port A panel power off
>[    1.839578] [drm:intel_edp_panel_off] Wait for panel power off time
>[    1.839589] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000000
>[    1.840248] [drm:ilk_hpd_irq_handler] hotplug event received, stat 0x08000000, dig 0x00000011, pins 0x00000010
>[    1.840253] [drm:intel_hpd_irq_handler] digital hpd port A - short
>[    1.840271] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short
>[    1.890256] [drm:wait_panel_status] Wait complete
>[    1.890271] [drm:intel_disable_shared_dpll] disable LCPLL 1350 (active 1, on? 1) for crtc 36
>[    1.890273] [drm:intel_disable_shared_dpll] disabling LCPLL 1350
>[    1.890283] [drm:intel_atomic_commit_tail] [ENCODER:57:DDI A]
>[    1.890291] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    1.890294] [drm:intel_atomic_commit_tail] [ENCODER:67:DDI C]
>[    1.890298] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.890301] [drm:intel_atomic_commit_tail] [ENCODER:69:DP-MST A]
>[    1.890304] [drm:intel_atomic_commit_tail] [ENCODER:70:DP-MST B]
>[    1.890307] [drm:intel_atomic_commit_tail] [ENCODER:71:DP-MST C]
>[    1.890310] [drm:intel_atomic_commit_tail] [ENCODER:72:DDI D]
>[    1.890312] [drm:verify_single_dpll_state.isra.75] WRPLL 1
>[    1.890316] [drm:verify_single_dpll_state.isra.75] WRPLL 2
>[    1.890318] [drm:verify_single_dpll_state.isra.75] SPLL
>[    1.890321] [drm:verify_single_dpll_state.isra.75] LCPLL 810
>[    1.890323] [drm:verify_single_dpll_state.isra.75] LCPLL 1350
>[    1.890324] [drm:verify_single_dpll_state.isra.75] LCPLL 2700
>[    1.890328] [drm:intel_enable_shared_dpll] enable LCPLL 1350 (active 1, on? 0) for crtc 36
>[    1.890330] [drm:intel_enable_shared_dpll] enabling LCPLL 1350
>[    1.891669] [drm:ilk_hpd_irq_handler] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010
>[    1.891674] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    1.891677] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0
>[    2.356025] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680]
>[    2.505581] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
>[    2.527094] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000
>[    2.527100] [drm:wait_panel_status] Wait complete
>[    2.527109] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008
>[    2.527113] [drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled
>[    2.545716] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input13
>[    2.575392] clocksource: Switched to clocksource tsc
>[    2.651897] [drm:ilk_hpd_irq_handler] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010
>[    2.651904] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    2.651907] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 1
>[    2.831561] [drm:intel_dp_read_dpcd] DPCD: 12 0a 82 41 00 00 01 00 b3 00 00 00 00 0b 00
>[    2.831570] [drm:edp_panel_on] Turn eDP port A panel power on
>[    2.831577] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    2.831590] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000008
>[    2.831596] [drm:wait_panel_status] Wait complete
>[    2.831602] [drm:edp_panel_on] Wait for panel power on
>[    2.831613] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 0000000b
>[    3.132454] [drm:wait_panel_status] Wait complete
>[    3.132886] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[    3.132900] [drm:i915_hotplug_work_func] running encoder hotplug functions
>[    3.132910] [drm:i915_hotplug_work_func] Connector eDP-1 (pin 4) received hotplug event.
>[    3.134002] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    3.134008] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    3.134012] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    3.134017] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1
>[    3.134661] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[    3.134666] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    3.134670] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    3.135305] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[    3.135311] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    3.135315] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    3.135946] [drm:intel_dp_start_link_train] clock recovery OK
>[    3.135953] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS2
>[    3.136895] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[    3.136900] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    3.136904] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1
>[    3.137839] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[    3.137845] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    3.137849] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1
>[    3.138783] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful
>[    3.138790] [drm:intel_dp_start_link_train] [CONNECTOR:58:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
>[    3.138874] [drm:intel_enable_pipe] enabling pipe A
>[    3.139052] [drm:intel_edp_backlight_on] 
>[    3.139059] [drm:intel_panel_enable_backlight] pipe A
>[    3.139071] [drm:intel_panel_actually_set_backlight] set backlight PWM = 306
>[    3.239033] [drm:intel_psr_enable] PSR not supported by this panel
>[    3.239036] [drm:intel_enable_ddi] Panel doesn't support DRRS
>[    3.239046] [drm:intel_fbc_enable] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[    3.239049] [drm:intel_fbc_enable] Enabling FBC on pipe A
>[    3.264040] [drm:verify_connector_state.isra.74] [CONNECTOR:58:eDP-1]
>[    3.264052] [drm:intel_atomic_commit_tail] [CRTC:36:pipe A]
>[    3.264070] [drm:verify_single_dpll_state.isra.75] LCPLL 1350
>[    3.301338] Console: switching to colour frame buffer device 240x67
>[    3.301344] [drm:intel_dp_detect] [CONNECTOR:58:eDP-1]
>[    3.301346] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no
>[    3.301348] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[    3.301349] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    3.301351] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    3.301736] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    3.425655] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    3.425694] [drm:drm_fb_helper_hotplug_event] 
>[    3.425705] [drm:drm_setup_crtcs] 
>[    3.425708] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:eDP-1]
>[    3.425711] [drm:intel_dp_detect] [CONNECTOR:58:eDP-1]
>[    3.425714] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no
>[    3.425716] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[    3.425717] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    3.425719] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    3.425813] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT500MX2 MU04 PQ: 0 ANSI: 5
>[    3.425968] ata1.00: Enabling discard_zeroes_data
>[    3.426012] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    3.426046] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    3.426047] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[    3.426061] sd 0:0:0:0: [sda] Write Protect is off
>[    3.426063] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    3.426088] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.426107] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    3.426230] ata1.00: Enabling discard_zeroes_data
>[    3.426751] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.426764] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:eDP-1] probed modes :
>[    3.426767] [drm:drm_mode_debug_printmodeline] Modeline 59:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[    3.426768] [drm:drm_mode_debug_printmodeline] Modeline 60:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[    3.426769] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:DP-1]
>[    3.426771] [drm:intel_dp_detect] [CONNECTOR:68:DP-1]
>[    3.426774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:DP-1] disconnected
>[    3.426775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-1]
>[    3.426777] [drm:intel_hdmi_detect] [CONNECTOR:73:HDMI-A-1]
>[    3.427556]  sda: sda1 sda2 sda3 sda4 sda5
>[    3.427964] ata1.00: Enabling discard_zeroes_data
>[    3.427987] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    3.427999] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    3.428401] sd 0:0:0:0: [sda] Attached SCSI disk
>[    3.430021] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[    3.430024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    3.432009] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    3.432010] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[    3.434017] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[    3.434020] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[    3.434021] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-1] disconnected
>[    3.434023] [drm:drm_setup_crtcs] connector 58 enabled? yes
>[    3.434023] [drm:drm_setup_crtcs] connector 68 enabled? no
>[    3.434024] [drm:drm_setup_crtcs] connector 73 enabled? no
>[    3.434037] [drm:intel_fb_initial_config] Not using firmware configuration
>[    3.434038] [drm:drm_setup_crtcs] looking for cmdline mode on connector 58
>[    3.434039] [drm:drm_setup_crtcs] looking for preferred mode on connector 58 0
>[    3.434039] [drm:drm_setup_crtcs] found mode 1920x1080
>[    3.434040] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
>[    3.434042] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0)
>[    3.733440] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    3.735385] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    3.735387] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    3.736743] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    3.738062] ata6.00: supports DRM functions and may not be fully accessible
>[    3.740051] ata6.00: ATA-10: Crucial_CT500MX200SSD3, MU04, max UDMA/133
>[    3.741489] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    3.746943] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    3.746945] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    3.748320] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    3.749729] ata6.00: supports DRM functions and may not be fully accessible
>[    3.756111] ata6.00: configured for UDMA/133
>[    3.757866] scsi 5:0:0:0: Direct-Access     ATA      Crucial_CT500MX2 MU04 PQ: 0 ANSI: 5
>[    3.759606] ata6.00: Enabling discard_zeroes_data
>[    3.759635] sd 5:0:0:0: Attached scsi generic sg1 type 0
>[    3.762945] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    3.764582] sd 5:0:0:0: [sdb] 4096-byte physical blocks
>[    3.766220] sd 5:0:0:0: [sdb] Write Protect is off
>[    3.767840] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    3.767861] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.769333] ata6.00: Enabling discard_zeroes_data
>[    3.772277]  sdb: sdb1
>[    3.773818] ata6.00: Enabling discard_zeroes_data
>[    3.775035] sd 5:0:0:0: [sdb] Attached SCSI disk
>[    3.777295] Freeing unused kernel memory: 1260K
>[    3.778375] Write protecting the kernel read-only data: 22528k
>[    3.779999] Freeing unused kernel memory: 2016K
>[    3.783403] Freeing unused kernel memory: 1116K
>[    3.789095] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    3.790343] x86/mm: Checking user space page tables
>[    3.795712] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    3.845571] dracut: dracut-046
>[    4.027905] rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002)
>[    4.041678] BTRFS: device label Gentoo devid 1 transid 264144 /dev/sdb1
>[    4.053191] systemd-udevd (2370) used greatest stack depth: 13888 bytes left
>[    4.055114] systemd-udevd (2421) used greatest stack depth: 13616 bytes left
>[    4.068958] BTRFS info (device sdb1): use zlib compression
>[    4.070320] BTRFS info (device sdb1): enabling ssd optimizations
>[    4.071422] BTRFS info (device sdb1): disk space caching is enabled
>[    4.072491] BTRFS info (device sdb1): has skinny extents
>[    4.236415] mount (2999) used greatest stack depth: 12912 bytes left
>[    4.335233] dracut: Mounted root filesystem /dev/sdb1
>[    4.383707] dracut: Switching root
>[    4.509431] init-early.sh (3103) used greatest stack depth: 11856 bytes left
>[    6.430993] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    6.431003] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[    6.676036] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
>[    6.697213] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    6.698973] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    6.699078] snd_hda_intel 0000:00:03.0: Applying patch firmware 'hda-jack-retask.fw'
>[    6.699249] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
>[    6.699334] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'hda-jack-retask.fw'
>[    6.701101] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
>[    6.701229] r8169 0000:04:00.1 eth0: RTL8411 at 0xffffadbe400c9000, xx:xx:xx:xx:xx:xx, XID 1c800800 IRQ 29
>[    6.701230] r8169 0000:04:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    6.709559] [drm:intel_power_well_enable] enabling display
>[    6.714603] AVX2 version of gcm_enc/dec engaged.
>[    6.714605] AES CTR mode by8 optimization enabled
>[    6.720649] snd_hda_codec_via hdaudioC1D0: autoconfig for VT1802: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
>[    6.720652] snd_hda_codec_via hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    6.720654] snd_hda_codec_via hdaudioC1D0:    hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
>[    6.720655] snd_hda_codec_via hdaudioC1D0:    mono: mono_out=0x0
>[    6.720656] snd_hda_codec_via hdaudioC1D0:    inputs:
>[    6.720657] snd_hda_codec_via hdaudioC1D0:      Internal Mic=0x30
>[    6.720659] snd_hda_codec_via hdaudioC1D0:      Mic=0x2b
>[    6.728262] [drm:i915_audio_component_get_eld] Not valid for port B
>[    6.728265] [drm:i915_audio_component_get_eld] Not valid for port B
>[    6.728266] [drm:i915_audio_component_get_eld] Not valid for port B
>[    6.728268] [drm:i915_audio_component_get_eld] Not valid for port C
>[    6.728270] [drm:i915_audio_component_get_eld] Not valid for port C
>[    6.728271] [drm:i915_audio_component_get_eld] Not valid for port C
>[    6.728273] [drm:i915_audio_component_get_eld] Not valid for port D
>[    6.728274] [drm:i915_audio_component_get_eld] Not valid for port D
>[    6.728276] [drm:i915_audio_component_get_eld] Not valid for port D
>[    6.729120] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
>[    6.729817] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
>[    6.729866] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
>[    6.730228] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
>[    6.730284] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
>[    6.730336] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
>[    6.730391] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
>[    6.730449] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
>[    6.730676] [drm:intel_power_well_disable] disabling display
>[    6.758806] Intel(R) Wireless WiFi driver for Linux
>[    6.758807] Copyright(c) 2003- 2015 Intel Corporation
>[    6.758889] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
>[    6.770753] iwlwifi 0000:03:00.0: loaded firmware version 17.608620.0 op_mode iwlmvm
>[    6.875548] intel_rapl: Found RAPL domain package
>[    6.875549] intel_rapl: Found RAPL domain core
>[    6.875550] intel_rapl: Found RAPL domain uncore
>[    6.875551] intel_rapl: Found RAPL domain dram
>[    6.886643] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
>[    6.904771] iwlwifi 0000:03:00.0: base HW address: ac:fd:ce:de:e1:58
>[    7.090311] [drm:intel_power_well_enable] enabling display
>[    7.092576] [drm:i915_audio_component_get_eld] Not valid for port B
>[    7.092578] [drm:i915_audio_component_get_eld] Not valid for port B
>[    7.092579] [drm:i915_audio_component_get_eld] Not valid for port B
>[    7.092581] [drm:i915_audio_component_get_eld] Not valid for port C
>[    7.092582] [drm:i915_audio_component_get_eld] Not valid for port C
>[    7.092583] [drm:i915_audio_component_get_eld] Not valid for port C
>[    7.092584] [drm:i915_audio_component_get_eld] Not valid for port D
>[    7.092586] [drm:i915_audio_component_get_eld] Not valid for port D
>[    7.092587] [drm:i915_audio_component_get_eld] Not valid for port D
>[    7.128223] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    7.500881] media: Linux media interface: v0.10
>[    7.512553] Linux video capture interface: v2.00
>[    7.535395] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:055c)
>[    7.537802] uvcvideo 3-8:1.0: Entity type for entity Extension 4 was not initialized!
>[    7.537804] uvcvideo 3-8:1.0: Entity type for entity Processing 2 was not initialized!
>[    7.537805] uvcvideo 3-8:1.0: Entity type for entity Camera 1 was not initialized!
>[    7.537860] input: BisonCam, NB Pro: BisonCam, NB  as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input24
>[    7.537919] usbcore: registered new interface driver uvcvideo
>[    7.537920] USB Video Class driver (1.1.1)
>[    7.824153] Bluetooth: Core ver 2.22
>[    7.824168] NET: Registered protocol family 31
>[    7.824169] Bluetooth: HCI device and connection manager initialized
>[    7.824171] Bluetooth: HCI socket layer initialized
>[    7.824172] Bluetooth: L2CAP socket layer initialized
>[    7.824177] Bluetooth: SCO socket layer initialized
>[    7.837480] usbcore: registered new interface driver btusb
>[    7.850962] Bluetooth: hci0: read Intel version: 3707100180012d0d27
>[    7.850963] Bluetooth: hci0: Intel device is already patched. patch num: 27
>[    8.376729] BTRFS info (device sdb1): disk space caching is enabled
>[   10.099106] zram: Added device: zram0
>[   10.099234] zram: Added device: zram1
>[   10.099344] zram: Added device: zram2
>[   10.116075] zram0: detected capacity change from 0 to 4294967296
>[   10.151686] Adding 4194300k swap on /dev/zram0.  Priority:16383 extents:1 across:4194300k SSDscFS
>[   10.166386] zram1: detected capacity change from 0 to 25769803776
>[   10.598429] zram2: detected capacity change from 0 to 25769803776
>[   11.472845] NetworkManager (8702) used greatest stack depth: 11488 bytes left
>[   11.769383] 8021q: 802.1Q VLAN Support v1.8
>[   11.775714] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   11.788276] r8169 0000:04:00.1 eth0: link down
>[   11.788331] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   11.788395] IPv6: ADDRCONF(NETDEV_UP): eth0.165: link is not ready
>[   11.788465] IPv6: ADDRCONF(NETDEV_UP): eth0.4092: link is not ready
>[   11.794838] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   12.057582] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   12.343018] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   12.355212] IPv6: ADDRCONF(NETDEV_UP): eth0.165: link is not ready
>[   12.355992] IPv6: ADDRCONF(NETDEV_UP): eth0.4092: link is not ready
>[   12.433939] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   14.113997] [drm:drm_mode_addfb2] [FB:77]
>[   14.162019] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:eDP-1]
>[   14.162023] [drm:intel_dp_detect] [CONNECTOR:58:eDP-1]
>[   14.162026] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no
>[   14.162029] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[   14.162030] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[   14.162031] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[   14.162035] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   14.162043] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[   14.162434] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[   14.163084] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   14.163098] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:eDP-1] probed modes :
>[   14.163100] [drm:drm_mode_debug_printmodeline] Modeline 59:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   14.163102] [drm:drm_mode_debug_printmodeline] Modeline 60:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[   14.163157] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:DP-1]
>[   14.163160] [drm:intel_dp_detect] [CONNECTOR:68:DP-1]
>[   14.163163] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:DP-1] disconnected
>[   14.163187] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-1]
>[   14.163188] [drm:intel_hdmi_detect] [CONNECTOR:73:HDMI-A-1]
>[   14.164991] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[   14.164993] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[   14.167001] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[   14.167005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[   14.169490] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[   14.169493] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[   14.170419] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   14.170420] Bluetooth: BNEP filters: protocol multicast
>[   14.170423] Bluetooth: BNEP socket layer initialized
>[   14.170993] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[   14.170998] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   14.171003] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-1] disconnected
>[   14.171145] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:eDP-1]
>[   14.171149] [drm:intel_dp_detect] [CONNECTOR:58:eDP-1]
>[   14.171152] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no
>[   14.171154] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[   14.171165] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[   14.171166] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[   14.171557] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[   14.172218] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   14.172232] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:eDP-1] probed modes :
>[   14.172234] [drm:drm_mode_debug_printmodeline] Modeline 59:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa
>[   14.172235] [drm:drm_mode_debug_printmodeline] Modeline 60:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa
>[   14.172964] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:DP-1]
>[   14.172969] [drm:intel_dp_detect] [CONNECTOR:68:DP-1]
>[   14.172973] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:68:DP-1] disconnected
>[   14.173012] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-1]
>[   14.173016] [drm:intel_hdmi_detect] [CONNECTOR:73:HDMI-A-1]
>[   14.175003] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[   14.175005] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[   14.176998] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
>[   14.177002] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[   14.179002] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[   14.179004] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry
>[   14.180991] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
>[   14.180994] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   14.180996] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:HDMI-A-1] disconnected
>[   14.563929] [drm:drm_mode_addfb2] [FB:79]
>[   14.563938] [drm:drm_mode_setcrtc] [CRTC:36:pipe A]
>[   14.563946] [drm:drm_mode_setcrtc] [CONNECTOR:58:eDP-1]
>[   14.613917] [drm:drm_mode_setcrtc] [CRTC:46:pipe B]
>[   14.613963] [drm:drm_mode_setcrtc] [CRTC:56:pipe C]
>[   15.745684] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   16.357154] bbswitch: loading out-of-tree module taints kernel.
>[   16.357439] bbswitch: version 0.8
>[   16.357443] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
>[   16.357447] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
>[   16.357457] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
>[   16.357531] bbswitch: detected an Optimus _DSM function
>[   16.357542] pci 0000:01:00.0: enabling device (0006 -> 0007)
>[   16.357590] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
>[   16.359824] bbswitch: disabling discrete graphics
>[   16.417217] [drm:drm_mode_addfb2] [FB:80]
>[   16.438837] [drm:drm_mode_addfb2] [FB:82]
>[   16.463848] [drm:drm_mode_addfb2] [FB:79]
>[   16.488865] [drm:drm_mode_addfb2] [FB:80]
>[   16.513827] [drm:drm_mode_addfb2] [FB:79]
>[   16.538861] [drm:drm_mode_addfb2] [FB:80]
>[   16.563816] [drm:drm_mode_addfb2] [FB:79]
>[   16.588829] [drm:drm_mode_addfb2] [FB:80]
>[   16.613813] [drm:drm_mode_addfb2] [FB:79]
>[   16.638819] [drm:drm_mode_addfb2] [FB:80]
>[   16.838385] random: crng init done
>[   16.884728] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[   16.951184] [drm:drm_mode_addfb2] [FB:79]
>[   17.183022] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[   17.183030] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[   17.476783] [drm:drm_mode_addfb2] [FB:80]
>[   18.002503] [drm:drm_mode_addfb2] [FB:79]
>[   18.507238] [drm:drm_mode_addfb2] [FB:80]
>[   19.006638] [drm:drm_mode_addfb2] [FB:79]

Actions: View

Attachments on bug 91845: 118043 | 118044 | 136590 | 141529 | 141530

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.