Attachment 138753 Details for Bug 105549 – dmesg, drm-tip with fix applied

dmesg, drm-tip with fix applied

dmesg.drm-tip.fixed (text/plain), 111.86 KB, created by Laszlo Valko on 2018-04-11 09:47:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Laszlo Valko

Created: 2018-04-11 09:47:54 UTC

Size: 111.86 KB

patch

obsolete

>[    0.000000] Linux version 4.16.0-rc7.x64-g98590826e4a4-dirty (root@store) (gcc version 7.3.0 (Gentoo 7.3.0 p1.0)) #2 SMP Wed Apr 11 11:30:56 CEST 2018
>[    0.000000] Command line: BOOT_IMAGE=kernel-4.16.0-rc7.x64-g98590826e4a4-dirty initrd=initrd-4.16.0-rc7.x64-g98590826e4a4-dirty.gz boot.dhcpvendor=net.x64 clock_utc=0 consoleblank=0 loadmodules=ahci netconsole=3514@172.17.0.210/eth0,3514@172.17.0.11/5c:ff:35:0a:9b:94 drm.debug=0xe
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
>[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
>[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b8b4bfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b8b4c000-0x00000000b8b4cfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000b8b4d000-0x00000000ca4ebfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ca4ec000-0x00000000ca532fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ca533000-0x00000000cae94fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000cae95000-0x00000000cf7fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082e7fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] random: fast init done
>[    0.000000] SMBIOS 3.1.1 present.
>[    0.000000] DMI: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x82e800 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
>[    0.000000]   1 base 00D0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00CE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00CD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] e820: last_pfn = 0xb8b4c max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fcf70-0x000fcf7f] mapped at [        (ptrval)]
>[    0.000000] Base memory trampoline at [        (ptrval)] 7f000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x20480c000, 0x20480cfff] PGTABLE
>[    0.000000] BRK [0x20480d000, 0x20480dfff] PGTABLE
>[    0.000000] BRK [0x20480e000, 0x20480efff] PGTABLE
>[    0.000000] BRK [0x20480f000, 0x20480ffff] PGTABLE
>[    0.000000] BRK [0x204810000, 0x204810fff] PGTABLE
>[    0.000000] BRK [0x204811000, 0x204811fff] PGTABLE
>[    0.000000] BRK [0x204812000, 0x204812fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x7ebb6000-0x7fffffff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000EBBD0 000024 (v02 DELL  )
>[    0.000000] ACPI: XSDT 0x00000000CA4FA0C8 000114 (v01 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000CA521F08 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: DSDT 0x00000000CA4FA270 027C92 (v02 DELL   CBX3     01072009 INTL 20160422)
>[    0.000000] ACPI: FACS 0x00000000CAE92180 000040
>[    0.000000] ACPI: UEFI 0x00000000CA523000 00063A (v01 INTEL  RstSataE 00000000 ??   00000000)
>[    0.000000] ACPI: APIC 0x00000000CA523640 0000BC (v03 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x00000000CA523700 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: FIDT 0x00000000CA523748 0000AC (v01 DELL   CBX3     01072009 AMI  00010013)
>[    0.000000] ACPI: MCFG 0x00000000CA5237F8 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
>[    0.000000] ACPI: HPET 0x00000000CA523838 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
>[    0.000000] ACPI: SSDT 0x00000000CA523870 000559 (v01 SataRe SataTabl 00001000 INTL 20160422)
>[    0.000000] ACPI: SSDT 0x00000000CA523DD0 0012E0 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
>[    0.000000] ACPI: HPET 0x00000000CA5250B0 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000CA5250E8 0007F1 (v02 INTEL  xh_OEMBD 00000000 INTL 20160422)
>[    0.000000] ACPI: UEFI 0x00000000CA5258E0 000042 (v01                 00000000      00000000)
>[    0.000000] ACPI: SSDT 0x00000000CA525928 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
>[    0.000000] ACPI: LPIT 0x00000000CA5270D8 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000CA527170 000161 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
>[    0.000000] ACPI: SSDT 0x00000000CA5272D8 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
>[    0.000000] ACPI: SSDT 0x00000000CA527578 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
>[    0.000000] ACPI: SSDT 0x00000000CA52A580 000517 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
>[    0.000000] ACPI: DBGP 0x00000000CA52AA98 000034 (v01 INTEL           00000002 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x00000000CA52AAD0 000054 (v00 INTEL           00000002 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000CA52AB28 0007AC (v02 INTEL  UsbCTabl 00001000 INTL 20160422)
>[    0.000000] ACPI: SSDT 0x00000000CA52B2D8 006B0D (v02 DptfTa DptfTabl 00001000 INTL 20160422)
>[    0.000000] ACPI: MSDM 0x00000000CA531DE8 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
>[    0.000000] ACPI: SLIC 0x00000000CA531E40 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
>[    0.000000] ACPI: NHLT 0x00000000CA531FB8 00002D (v00 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: BGRT 0x00000000CA531FE8 000038 (v00 \xfffffff3\xffffffee              01072009 AMI  00010013)
>[    0.000000] ACPI: UEFI 0x00000000CA532020 00005C (v01 INTEL  RstSataV 00000000 ??   00000000)
>[    0.000000] ACPI: TPM2 0x00000000CA532080 000034 (v03 DELL   CBX3     00000001 AMI  00000000)
>[    0.000000] ACPI: ASF! 0x00000000CA5320B8 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: DMAR 0x00000000CA532158 000110 (v01 INTEL  EDK2     00000001 INTL 00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000082e7fffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x82e7fd000-0x82e7fffff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000082e7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b8b4bfff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000082e7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000082e7fffff]
>[    0.000000] On node 0 totalpages: 8286951
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 44 pages reserved
>[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 11758 pages used for memmap
>[    0.000000]   DMA32 zone: 752460 pages, LIFO batch:31
>[    0.000000]   Normal zone: 117664 pages used for memmap
>[    0.000000]   Normal zone: 7530496 pages, LIFO batch:31
>[    0.000000] Reserved but unavailable: 101 pages
>[    0.000000] Reserving Intel graphics memory at [mem 0xcd800000-0xcf7fffff]
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] e820: [mem 0xcf800000-0xefffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s144040 r8192 d32088 u262144
>[    0.000000] pcpu-alloc: s144040 r8192 d32088 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8157421
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernel-4.16.0-rc7.x64-g98590826e4a4-dirty initrd=initrd-4.16.0-rc7.x64-g98590826e4a4-dirty.gz boot.dhcpvendor=net.x64 clock_utc=0 consoleblank=0 loadmodules=ahci netconsole=3514@172.17.0.210/eth0,3514@172.17.0.11/5c:ff:35:0a:9b:94 drm.debug=0xe
>[    0.000000] Memory: 32516568K/33147804K available (10252K kernel code, 1222K rwdata, 2760K rodata, 1540K init, 608K bss, 631236K reserved, 0K cma-reserved)
>[    0.000000] Kernel/User page tables isolation: enabled
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
>[    0.000000] spurious 8259A interrupt: IRQ7.
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] ACPI: Core revision 20180105
>[    0.000000] ACPI: 11 ACPI AML tables successfully acquired and loaded
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
>[    0.000000] hpet clockevent registered
>[    0.004000] APIC: Switch to symmetric I/O mode setup
>[    0.004000] DMAR: Host address width 39
>[    0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>[    0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
>[    0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
>[    0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
>[    0.004000] DMAR: RMRR base: 0x000000ca217000 end: 0x000000ca236fff
>[    0.004000] DMAR: RMRR base: 0x000000caff4000 end: 0x000000cb23dfff
>[    0.004000] DMAR: RMRR base: 0x000000cd000000 end: 0x000000cf7fffff
>[    0.004000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
>[    0.004000] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
>[    0.004000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
>[    0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
>[    0.004000] DMAR: DRHD: handling fault status reg 3
>[    0.004000] DMAR: [DMA Read] Request device [00:17.0] fault addr ca286000 [fault reason 06] PTE Read access is not set
>[    0.008000] DMAR-IR: Enabled IRQ remapping in xapic mode
>[    0.012000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.032000] tsc: Detected 2100.000 MHz processor
>[    0.032000] tsc: Detected 2112.000 MHz TSC
>[    0.032000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e71785e5dd, max_idle_ns: 440795244814 ns
>[    0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4224.00 BogoMIPS (lpj=8448000)
>[    0.032000] pid_max: default: 32768 minimum: 301
>[    0.032000] Security Framework initialized
>[    0.032000] Yama: becoming mindful.
>[    0.037616] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
>[    0.040221] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.040501] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.040713] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.041136] CPU: Physical Processor ID: 0
>[    0.041270] CPU: Processor Core ID: 0
>[    0.041406] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.041546] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.041694] mce: CPU supports 10 MCE banks
>[    0.041839] CPU0: Thermal monitoring enabled (TM1)
>[    0.042001] process: using mwait in idle threads
>[    0.042137] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.042275] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.042416] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
>[    0.042555] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
>[    0.042698] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
>[    0.042898] Spectre V2 : Enabling Restricted Speculation for firmware calls
>[    0.043187] Freeing SMP alternatives memory: 28K
>[    0.044063] TSC deadline timer enabled
>[    0.044067] smpboot: CPU0: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz (family: 0x6, model: 0x8e, stepping: 0xa)
>[    0.044461] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
>[    0.044817] ... version:                4
>[    0.045010] ... bit width:              48
>[    0.045200] ... generic registers:      4
>[    0.045391] ... value mask:             0000ffffffffffff
>[    0.045587] ... max period:             00007fffffffffff
>[    0.045780] ... fixed-purpose events:   3
>[    0.045972] ... event mask:             000000070000000f
>[    0.046212] Hierarchical SRCU implementation.
>[    0.047151] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.047368] smp: Bringing up secondary CPUs ...
>[    0.047644] x86: Booting SMP configuration:
>[    0.047838] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
>[    0.053362] smp: Brought up 1 node, 8 CPUs
>[    0.053751] smpboot: Max logical packages: 1
>[    0.053945] smpboot: Total of 8 processors activated (33792.00 BogoMIPS)
>[    0.056867] devtmpfs: initialized
>[    0.057108] x86/mm: Memory block size: 128MB
>[    0.059603] PM: Registering ACPI NVS region [mem 0xb8b4c000-0xb8b4cfff] (4096 bytes)
>[    0.059918] PM: Registering ACPI NVS region [mem 0xca533000-0xcae94fff] (9838592 bytes)
>[    0.060257] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.060591] futex hash table entries: 2048 (order: 6, 262144 bytes)
>[    0.060874] pinctrl core: initialized pinctrl subsystem
>[    0.061207] NET: Registered protocol family 16
>[    0.061524] audit: initializing netlink subsys (disabled)
>[    0.061744] audit: type=2000 audit(1523439472.060:1): state=initialized audit_enabled=0 res=1
>[    0.062073] cpuidle: using governor ladder
>[    0.062073] ACPI: bus type PCI registered
>[    0.062073] PCI: Using configuration type 1 for base access
>[    0.064699] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.064902] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.065339] ACPI: Added _OSI(Module Device)
>[    0.065531] ACPI: Added _OSI(Processor Device)
>[    0.065724] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.065916] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.068858] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.RP04.PXSX._SB.PCI0.RP05.PXSX], AE_NOT_FOUND (20180105/dswload2-194)
>[    0.069190] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180105/psobject-252)
>[    0.069506] ACPI Error: Method parse/execution failed \_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20180105/psparse-550)
>[    0.070184] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.RP08.PXSX._SB.PCI0.RP09.PXSX], AE_NOT_FOUND (20180105/dswload2-194)
>[    0.070514] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180105/psobject-252)
>[    0.070831] ACPI Error: Method parse/execution failed \_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20180105/psparse-550)
>[    0.072570] ACPI: Executed 48 blocks of module-level executable AML code
>[    0.087049] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.097047] ACPI: Dynamic OEM Table Load:
>[    0.097248] ACPI: SSDT 0xFFFFA0158A3EE800 0005EE (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
>[    0.097727] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.098030] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
>[    0.099405] ACPI: Dynamic OEM Table Load:
>[    0.099604] ACPI: SSDT 0xFFFFA0158A3BA000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
>[    0.100060] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.100470] ACPI: Dynamic OEM Table Load:
>[    0.100665] ACPI: SSDT 0xFFFFA0158A3B86C0 0000BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
>[    0.101092] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.101408] ACPI: Dynamic OEM Table Load:
>[    0.101605] ACPI: SSDT 0xFFFFA0158A3EE000 000628 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
>[    0.102025] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.102720] ACPI: Dynamic OEM Table Load:
>[    0.102921] ACPI: SSDT 0xFFFFA0158DD06000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
>[    0.104008] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.104409] ACPI: Dynamic OEM Table Load:
>[    0.104604] ACPI: SSDT 0xFFFFA01589C0E800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
>[    0.105098] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.105507] ACPI: Dynamic OEM Table Load:
>[    0.105705] ACPI: SSDT 0xFFFFA01589C0E400 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
>[    0.106198] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.109573] ACPI: EC: EC started
>[    0.109764] ACPI: EC: interrupt blocked
>[    0.118828] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
>[    0.119025] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
>[    0.119338] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
>[    0.119651] ACPI: Interpreter enabled
>[    0.119890] ACPI: (supports S0 S3 S5)
>[    0.120002] ACPI: Using IOAPIC for interrupt routing
>[    0.120248] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.121296] ACPI: Enabled 7 GPEs in block 00 to 7F
>[    0.169187] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.RP05.PXSX.WGST], AE_NOT_FOUND (20180105/psargs-364)
>[    0.169516] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20180105/psparse-550)
>[    0.169900] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.RP05.PXSX.WGST], AE_NOT_FOUND (20180105/psargs-364)
>[    0.170224] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20180105/psparse-550)
>[    0.171331] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
>[    0.171535] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
>[    0.172211] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
>[    0.173100] PCI host bridge to bus 0000:00
>[    0.173295] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.173495] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.173694] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.174009] pci_bus 0000:00: root bus resource [mem 0xcf800000-0xefffffff window]
>[    0.174322] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
>[    0.174635] pci_bus 0000:00: root bus resource [bus 00-7e]
>[    0.174840] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
>[    0.174981] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
>[    0.174993] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit]
>[    0.175000] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.175005] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.175163] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
>[    0.175179] pci 0000:00:04.0: reg 0x10: [mem 0xef240000-0xef247fff 64bit]
>[    0.175419] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
>[    0.175442] pci 0000:00:14.0: reg 0x10: [mem 0xef230000-0xef23ffff 64bit]
>[    0.175513] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.175747] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
>[    0.175769] pci 0000:00:14.2: reg 0x10: [mem 0xef258000-0xef258fff 64bit]
>[    0.176027] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
>[    0.176290] pci 0000:00:15.0: reg 0x10: [mem 0xef257000-0xef257fff 64bit]
>[    0.177276] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
>[    0.177539] pci 0000:00:15.1: reg 0x10: [mem 0xef256000-0xef256fff 64bit]
>[    0.178461] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
>[    0.178486] pci 0000:00:16.0: reg 0x10: [mem 0xef255000-0xef255fff 64bit]
>[    0.178562] pci 0000:00:16.0: PME# supported from D3hot
>[    0.178744] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400
>[    0.178763] pci 0000:00:17.0: reg 0x10: [mem 0xef250000-0xef251fff]
>[    0.178771] pci 0000:00:17.0: reg 0x14: [mem 0xef254000-0xef2540ff]
>[    0.178779] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
>[    0.178787] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
>[    0.178795] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
>[    0.178803] pci 0000:00:17.0: reg 0x24: [mem 0xef253000-0xef2537ff]
>[    0.178847] pci 0000:00:17.0: PME# supported from D3hot
>[    0.179011] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
>[    0.179076] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.179256] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
>[    0.179320] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.179517] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
>[    0.179733] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
>[    0.179748] pci 0000:00:1f.2: reg 0x10: [mem 0xef24c000-0xef24ffff]
>[    0.179943] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
>[    0.179971] pci 0000:00:1f.3: reg 0x10: [mem 0xef248000-0xef24bfff 64bit]
>[    0.180002] pci 0000:00:1f.3: reg 0x20: [mem 0xef220000-0xef22ffff 64bit]
>[    0.180051] pci 0000:00:1f.3: PME# supported from D3hot D3cold
>[    0.180319] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
>[    0.180380] pci 0000:00:1f.4: reg 0x10: [mem 0xef252000-0xef2520ff 64bit]
>[    0.180451] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
>[    0.180673] pci 0000:00:1f.6: [8086:15d7] type 00 class 0x020000
>[    0.180698] pci 0000:00:1f.6: reg 0x10: [mem 0xef200000-0xef21ffff]
>[    0.180796] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>[    0.180996] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000
>[    0.181027] pci 0000:01:00.0: reg 0x14: [mem 0xef100000-0xef100fff]
>[    0.181146] pci 0000:01:00.0: supports D1 D2
>[    0.181147] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
>[    0.192021] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.192221] pci 0000:00:1c.0:   bridge window [mem 0xef100000-0xef1fffff]
>[    0.192573] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
>[    0.192663] pci 0000:02:00.0: reg 0x10: [mem 0xef000000-0xef001fff 64bit]
>[    0.193229] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.204305] pci 0000:00:1c.2: PCI bridge to [bus 02]
>[    0.204507] pci 0000:00:1c.2:   bridge window [mem 0xef000000-0xef0fffff]
>[    0.211260] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.211519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.211779] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.212033] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.212289] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.212543] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.212797] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.213052] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.219276] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.RP05.PXSX.WGST], AE_NOT_FOUND (20180105/psargs-364)
>[    0.219605] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20180105/psparse-550)
>[    0.220121] ACPI: EC: interrupt unblocked
>[    0.220318] ACPI: EC: event unblocked
>[    0.220530] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
>[    0.224006] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
>[    0.224577] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.224913] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.225232] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.225428] vgaarb: loaded
>[    0.225737] SCSI subsystem initialized
>[    0.225936] libata version 3.00 loaded.
>[    0.225940] ACPI: bus type USB registered
>[    0.226145] usbcore: registered new interface driver usbfs
>[    0.226346] usbcore: registered new interface driver hub
>[    0.226565] usbcore: registered new device driver usb
>[    0.226826] EDAC MC: Ver: 3.0.0
>[    0.227466] PCI: Using ACPI for IRQ routing
>[    0.227466] PCI: pci_cache_line_size set to 64 bytes
>[    0.227466] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
>[    0.227466] e820: reserve RAM buffer [mem 0xb8b4c000-0xbbffffff]
>[    0.227466] e820: reserve RAM buffer [mem 0x82e800000-0x82fffffff]
>[    0.227466] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    0.227466] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
>[    0.228000] clocksource: Switched to clocksource tsc-early
>[    0.236743] VFS: Disk quotas dquot_6.6.0
>[    0.236953] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.237198] pnp: PnP ACPI init
>[    0.256665] system 00:00: [io  0x0680-0x069f] has been reserved
>[    0.257198] system 00:00: [io  0xffff] has been reserved
>[    0.257398] system 00:00: [io  0xffff] has been reserved
>[    0.257927] system 00:00: [io  0xffff] has been reserved
>[    0.258124] system 00:00: [io  0x1800-0x18fe] has been reserved
>[    0.258325] system 00:00: [io  0x164e-0x164f] has been reserved
>[    0.258527] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.258663] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.258705] system 00:02: [io  0x1854-0x1857] has been reserved
>[    0.258907] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.259022] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.259296] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.259500] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.259701] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.259905] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
>[    0.260111] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.260311] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
>[    0.260516] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.260718] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
>[    0.260920] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.261124] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved
>[    0.261329] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.261374] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
>[    0.261575] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
>[    0.261777] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
>[    0.261980] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
>[    0.262182] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
>[    0.262383] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
>[    0.262586] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
>[    0.262789] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.263178] system 00:06: [io  0xff00-0xfffe] has been reserved
>[    0.263382] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.264890] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
>[    0.265095] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
>[    0.265296] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
>[    0.265498] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
>[    0.265700] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
>[    0.265904] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.316363] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.RP05.PXSX.WGST], AE_NOT_FOUND (20180105/psargs-364)
>[    0.316697] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20180105/psparse-550)
>[    0.317082] pnp: PnP ACPI: found 8 devices
>[    0.322989] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.323324] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.323523] pci 0000:00:1c.0:   bridge window [mem 0xef100000-0xef1fffff]
>[    0.323727] pci 0000:00:1c.2: PCI bridge to [bus 02]
>[    0.323924] pci 0000:00:1c.2:   bridge window [mem 0xef000000-0xef0fffff]
>[    0.324132] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.324133] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.324135] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.324136] pci_bus 0000:00: resource 7 [mem 0xcf800000-0xefffffff window]
>[    0.324137] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
>[    0.324138] pci_bus 0000:01: resource 1 [mem 0xef100000-0xef1fffff]
>[    0.324140] pci_bus 0000:02: resource 1 [mem 0xef000000-0xef0fffff]
>[    0.324311] NET: Registered protocol family 2
>[    0.324647] tcp_listen_portaddr_hash hash table entries: 16384 (order: 7, 655360 bytes)
>[    0.325122] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.325873] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>[    0.326386] TCP: Hash tables configured (established 262144 bind 65536)
>[    0.326661] UDP hash table entries: 16384 (order: 8, 1572864 bytes)
>[    0.327129] UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes)
>[    0.327587] NET: Registered protocol family 1
>[    0.327880] RPC: Registered named UNIX socket transport module.
>[    0.328083] RPC: Registered udp transport module.
>[    0.328277] RPC: Registered tcp transport module.
>[    0.328469] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.328677] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.330405] PCI: CLS 0 bytes, default 64
>[    0.330442] Trying to unpack rootfs image as initramfs...
>[    0.645404] Freeing initrd memory: 20776K
>[    0.645646] DMAR: ACPI device "device:6a" under DMAR at fed91000 as 00:15.0
>[    0.645850] DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.1
>[    0.646060] DMAR: No ATSR found
>[    0.646320] DMAR: dmar0: Using Queued invalidation
>[    0.646596] dmar0: Allocated order 8 PASID table.
>[    0.646869] DMAR: dmar1: Using Queued invalidation
>[    0.647289] DMAR: Setting RMRR:
>[    0.647553] DMAR: Setting identity map for device 0000:00:02.0 [0xcd000000 - 0xcf7fffff]
>[    0.647951] DMAR: Setting identity map for device 0000:00:14.0 [0xcaff4000 - 0xcb23dfff]
>[    0.648285] DMAR: Setting identity map for device 0000:00:14.0 [0xca217000 - 0xca236fff]
>[    0.648610] DMAR: Prepare 0-16MiB unity mapping for LPC
>[    0.648877] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
>[    0.649391] DMAR: Intel(R) Virtualization Technology for Directed I/O
>[    0.649632] iommu: Adding device 0000:00:00.0 to group 0
>[    0.649837] iommu: Adding device 0000:00:02.0 to group 1
>[    0.650039] iommu: Adding device 0000:00:04.0 to group 2
>[    0.650251] iommu: Adding device 0000:00:14.0 to group 3
>[    0.650454] iommu: Adding device 0000:00:14.2 to group 3
>[    0.650661] iommu: Adding device 0000:00:15.0 to group 4
>[    0.650864] iommu: Adding device 0000:00:15.1 to group 4
>[    0.651070] iommu: Adding device 0000:00:16.0 to group 5
>[    0.651273] iommu: Adding device 0000:00:17.0 to group 6
>[    0.651490] iommu: Adding device 0000:00:1c.0 to group 7
>[    0.651693] iommu: Adding device 0000:00:1c.2 to group 7
>[    0.651909] iommu: Adding device 0000:00:1f.0 to group 8
>[    0.652121] iommu: Adding device 0000:00:1f.2 to group 8
>[    0.652324] iommu: Adding device 0000:00:1f.3 to group 8
>[    0.652529] iommu: Adding device 0000:00:1f.4 to group 8
>[    0.652731] iommu: Adding device 0000:00:1f.6 to group 8
>[    0.652930] iommu: Adding device 0000:01:00.0 to group 7
>[    0.653127] iommu: Adding device 0000:02:00.0 to group 7
>[    0.655064] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
>[    0.655380] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    0.655577] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    0.655772] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    0.655968] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    0.656168] RAPL PMU: hw unit of domain psys 2^-14 Joules
>[    0.656474] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e71785e5dd, max_idle_ns: 440795244814 ns
>[    0.656809] clocksource: Switched to clocksource tsc
>[    0.657720] Initialise system trusted keyrings
>[    0.657947] workingset: timestamp_bits=43 max_order=23 bucket_order=0
>[    0.658395] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>[    0.658678] NFS: Registering the id_resolver key type
>[    0.658877] Key type id_resolver registered
>[    0.659070] Key type id_legacy registered
>[    0.659263] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
>[    0.659800] Key type asymmetric registered
>[    0.659994] Asymmetric key parser 'x509' registered
>[    0.660217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.660561] io scheduler noop registered
>[    0.660753] io scheduler deadline registered (default)
>[    0.660959] io scheduler cfq registered
>[    0.661148] io scheduler mq-deadline registered (default)
>[    0.661344] io scheduler kyber registered
>[    0.662015] intel_idle: MWAIT substates: 0x11142120
>[    0.662016] intel_idle: v0.4.1 model 0x8E
>[    0.662368] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.662443] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>[    0.662769] ACPI: Lid Switch [LID0]
>[    0.662989] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    0.663310] ACPI: Power Button [PBTN]
>[    0.663527] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>[    0.663848] ACPI: Sleep Button [SBTN]
>[    0.664076] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[    0.664392] ACPI: Power Button [PWRF]
>[    0.665889] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>[    0.666414] Linux agpgart interface v0.103
>[    0.667775] brd: module loaded
>[    0.669467] loop: module loaded
>[    0.669752] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    0.669950] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    0.670327] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.157880] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 8c:ec:4b:e5:92:4c
>[    1.158203] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
>[    1.158460] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
>[    1.158828] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.159032] ehci-pci: EHCI PCI platform driver
>[    1.159246] ehci-platform: EHCI generic platform driver
>[    1.159462] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.159898] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.160247] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.161667] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
>[    1.161993] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.162149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.162353] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.162668] usb usb1: Product: xHCI Host Controller
>[    1.166074] usb usb1: Manufacturer: Linux 4.16.0-rc7.x64-g98590826e4a4-dirty xhci-hcd
>[    1.166389] usb usb1: SerialNumber: 0000:00:14.0
>[    1.166775] hub 1-0:1.0: USB hub found
>[    1.166983] hub 1-0:1.0: 12 ports detected
>[    1.168233] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.168549] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.168902] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.169104] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.169417] usb usb2: Product: xHCI Host Controller
>[    1.169612] usb usb2: Manufacturer: Linux 4.16.0-rc7.x64-g98590826e4a4-dirty xhci-hcd
>[    1.169924] usb usb2: SerialNumber: 0000:00:14.0
>[    1.170307] hub 2-0:1.0: USB hub found
>[    1.170511] hub 2-0:1.0: 6 ports detected
>[    1.171546] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.171749] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.172483] i8042: Warning: Keylock active
>[    1.172975] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.173448] mousedev: PS/2 mouse device common for all mice
>[    1.174216] usbcore: registered new interface driver synaptics_usb
>[    1.174473] rtc_cmos 00:01: RTC can wake from S4
>[    1.175224] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    1.175542] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.176091] i801_smbus 0000:00:1f.4: SPD Write Disable is set
>[    1.176354] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>[    1.176736] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
>[    1.205619] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.RP05.PXSX.WGST], AE_NOT_FOUND (20180105/psargs-364)
>[    1.205952] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20180105/psparse-550)
>[    1.206505] device-mapper: uevent: version 1.0.3
>[    1.206841] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
>[    1.207162] intel_pstate: Intel P-state driver initializing
>[    1.207917] intel_pstate: HWP enabled
>[    1.208296] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.208522] usbcore: registered new interface driver usbhid
>[    1.208700] usbhid: USB HID core driver
>[    1.208902] intel_pmc_core:  initialized
>[    1.209159] NET: Registered protocol family 17
>[    1.209361] Key type dns_resolver registered
>[    1.210183] microcode: sig=0x806ea, pf=0x80, revision=0x84
>[    1.210691] microcode: Microcode Update Driver: v2.2.
>[    1.210700] sched_clock: Marking stable (1210686974, 0)->(1190145439, 20541535)
>[    1.211965] registered taskstats version 1
>[    1.212155] Loading compiled-in X.509 certificates
>[    1.213182] netpoll: netconsole: local port 3514
>[    1.213358] netpoll: netconsole: local IPv4 address 172.17.0.210
>[    1.213538] netpoll: netconsole: interface 'eth0'
>[    1.213712] netpoll: netconsole: remote port 3514
>[    1.213886] netpoll: netconsole: remote IPv4 address 172.17.0.11
>[    1.214064] netpoll: netconsole: remote ethernet address 5c:ff:35:0a:9b:94
>[    1.214244] netpoll: netconsole: device eth0 not up yet, forcing it
>[    1.504296] usb 1-5: new high-speed USB device number 2 using xhci_hcd
>[    1.678710] usb 1-5: New USB device found, idVendor=0bda, idProduct=568c
>[    1.678895] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    1.679077] usb 1-5: Product: Integrated_Webcam_HD
>[    1.679253] usb 1-5: Manufacturer: CNFGH16N4624101EF3F2
>[    1.679430] usb 1-5: SerialNumber: 200901010001
>[    1.808298] usb 1-7: new full-speed USB device number 3 using xhci_hcd
>[    1.958501] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
>[    1.958686] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.084298] usb 1-10: new full-speed USB device number 4 using xhci_hcd
>[    2.265541] usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834
>[    2.265725] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.266007] usb 1-10: Product: 5880
>[    2.266179] usb 1-10: Manufacturer: Broadcom Corp
>[    2.266356] usb 1-10: SerialNumber: 0123456789ABCD
>[    4.314501] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[    4.326013] console [netcon0] enabled
>[    4.326190] netconsole: network logging started
>[    4.326509] rtc_cmos 00:01: setting system clock to 2018-04-11 09:37:56 UTC (1523439476)
>[    4.327485] Freeing unused kernel memory: 1540K
>[    4.327663] Write protecting the kernel read-only data: 16384k
>[    4.328124] Freeing unused kernel memory: 2024K
>[    4.329621] Freeing unused kernel memory: 1336K
>[    4.332204] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    4.332385] x86/mm: Checking user space page tables
>[    4.334833] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    4.335017] rodata_test: all tests were successful
>[    4.347373] async_tx: api initialized (async)
>[    4.354038] xor: automatically using best checksumming function   avx       
>[    4.428045] raid6: sse2x1   gen() 15099 MB/s
>[    4.496045] raid6: sse2x1   xor() 11153 MB/s
>[    4.564045] raid6: sse2x2   gen() 18565 MB/s
>[    4.632045] raid6: sse2x2   xor() 12702 MB/s
>[    4.700046] raid6: sse2x4   gen() 21783 MB/s
>[    4.768051] raid6: sse2x4   xor() 13508 MB/s
>[    4.836037] raid6: avx2x1   gen() 30159 MB/s
>[    4.904037] raid6: avx2x1   xor() 21304 MB/s
>[    4.972037] raid6: avx2x2   gen() 36366 MB/s
>[    5.040037] raid6: avx2x2   xor() 23308 MB/s
>[    5.108036] raid6: avx2x4   gen() 42066 MB/s
>[    5.176036] raid6: avx2x4   xor() 25041 MB/s
>[    5.176226] raid6: using algorithm avx2x4 gen() 42066 MB/s
>[    5.176405] raid6: .... xor() 25041 MB/s, rmw enabled
>[    5.176583] raid6: using avx2x2 recovery algorithm
>[    5.195880] device-mapper: raid: Loading target version 1.13.2
>[    5.204440] ahci 0000:00:17.0: version 3.0
>[    5.204562] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
>[    5.215103] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl RAID mode
>[    5.215401] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst 
>[    5.216053] scsi host0: ahci
>[    5.216537] scsi host1: ahci
>[    5.216935] scsi host2: ahci
>[    5.217132] ata1: SATA max UDMA/133 abar m2048@0xef253000 port 0xef253100 irq 125
>[    5.217416] ata2: DUMMY
>[    5.217590] ata3: SATA max UDMA/133 abar m2048@0xef253000 port 0xef253200 irq 125
>[    5.538959] ata1: SATA link down (SStatus 4 SControl 300)
>[    5.854949] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    5.856602] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    5.856603] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    5.856896] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    5.857303] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    5.858962] ata3.00: ATA-11: SanDisk X600 M.2 2280 SATA 512GB, X6113012, max UDMA/133
>[    5.859256] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    5.861601] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    5.861602] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    5.861896] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    5.862292] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    5.864501] ata3.00: configured for UDMA/133
>[    5.866108] scsi 2:0:0:0: Direct-Access     ATA      SanDisk X600 M.2 3012 PQ: 0 ANSI: 5
>[    5.866503] sd 2:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
>[    5.866838] sd 2:0:0:0: [sda] Write Protect is off
>[    5.867019] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    5.867024] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    5.872060]  sda: sda1 sda3 sda4
>[    5.872636] sd 2:0:0:0: [sda] Attached SCSI disk
>[    5.874378] udevd[414]: starting eudev-3.2.5
>[   10.313176] random: crng init done
>[   27.121781] [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH
>[   27.121795] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB
>[   27.121814] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no)
>[   27.121831] [drm:intel_uc_init_early [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0)
>[   27.121846] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03
>[   27.122290] [drm:i915_driver_load [i915]] ppgtt mode: 3
>[   27.122321] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
>[   27.122335] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[   27.122349] [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M
>[   27.122350] [drm] VT-d active for gfx access
>[   27.122578] [drm] Replacing VGA console driver
>[   27.124968] Console: switching to colour dummy device 80x25
>[   27.125012] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = cf700047
>[   27.125028] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K
>[   27.125303] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xcae88018
>[   27.125325] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[   27.125340] [drm:intel_opregion_setup [i915]] SWSCI supported
>[   27.126278] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[   27.126292] [drm:intel_opregion_setup [i915]] ASLE supported
>[   27.126306] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[   27.126320] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[   27.126350] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[   27.126353] [drm] Driver supports precise vblank timestamp query.
>[   27.126371] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
>[   27.126391] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE        ", BDB version 212
>[   27.126407] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[   27.126422] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[   27.126747] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
>[   27.126762] [drm:intel_bios_init [i915]] Panel type: 14 (VBT)
>[   27.126776] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[   27.126791] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[   27.126795] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 148500 1920 2008 2053 2200 1080 1083 1089 1125 0x8 0xa
>[   27.126808] [drm:intel_bios_init [i915]] VBT initial LVDS value 300
>[   27.126822] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0
>[   27.126836] [drm:intel_bios_init [i915]] DRRS State Enabled:0
>[   27.126849] [drm:intel_bios_init [i915]] Skipping SDVO device mapping
>[   27.126863] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[   27.126876] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
>[   27.126889] [drm:intel_bios_init [i915]] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[   27.126902] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8
>[   27.126916] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[   27.126929] [drm:intel_bios_init [i915]] Port C has invalid DDC pin 2, reverting to defaults
>[   27.126941] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8
>[   27.126973] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[   27.126996] [drm:i915_driver_load [i915]] rawclk rate: 24000 kHz
>[   27.127011] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[   27.127027] [drm:intel_power_well_enable [i915]] enabling power well 1
>[   27.127042] [drm:intel_power_well_enable [i915]] enabling MISC IO power well
>[   27.127060] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 3
>[   27.127076] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
>[   27.127090] [drm:skl_init_cdclk [i915]] Max dotclock rate: 675000 kHz
>[   27.127115] [drm:intel_power_well_enable [i915]] enabling always-on
>[   27.127129] [drm:intel_power_well_enable [i915]] enabling DC off
>[   27.127142] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[   27.127157] [drm:intel_power_well_enable [i915]] enabling power well 2
>[   27.127159] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[   27.127175] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>[   27.127191] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
>[   27.127203] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>[   27.127215] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
>[   27.127233] [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin
>[   27.127553] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
>[   27.127609] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
>[   27.127640] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
>[   27.127652] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
>[   27.127663] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
>[   27.127674] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
>[   27.127685] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
>[   27.127715] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
>[   27.127735] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
>[   27.127754] [drm:intel_modeset_init [i915]] 3 display pipes available.
>[   27.127823] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 3
>[   27.128149] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
>[   27.128170] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT)
>[   27.128225] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
>[   27.128240] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[   27.128254] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
>[   27.128276] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200
>[   27.128335] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[   27.128374] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[   27.128435] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   27.128857] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 41 00 00 01 00 02 02 06 00 00 0b 00
>[   27.129255] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[   27.129729] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
>[   27.129883] [drm:intel_dp_init_connector [i915]] eDP DPCD: 01 12 47
>[   27.133334] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   27.133335] [drm:drm_add_display_info] non_desktop set to 0
>[   27.133343] [drm:drm_add_display_info] non_desktop set to 0
>[   27.133364] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
>[   27.133412] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 7500/7500
>[   27.133439] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>[   27.133456] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
>[   27.133478] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
>[   27.133494] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT)
>[   27.133516] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[   27.133531] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (platform default)
>[   27.133559] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0
>[   27.133577] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0
>[   27.133594] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x0
>[   27.133611] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:41:pipe A] hw state readout: enabled
>[   27.133628] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[   27.133644] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[   27.133660] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[   27.133675] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:55:pipe B] hw state readout: disabled
>[   27.133692] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0
>[   27.133707] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0
>[   27.133721] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0
>[   27.133736] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:69:pipe C] hw state readout: disabled
>[   27.133751] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1
>[   27.133766] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[   27.133780] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[   27.133795] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>[   27.133812] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:70:DDI A] hw state readout: enabled, pipe A
>[   27.133827] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:79:DDI B] hw state readout: disabled, pipe A
>[   27.133841] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:84:DDI C] hw state readout: disabled, pipe A
>[   27.133855] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:86:DP-MST A] hw state readout: disabled, pipe A
>[   27.133869] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:87:DP-MST B] hw state readout: disabled, pipe B
>[   27.133883] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:88:DP-MST C] hw state readout: disabled, pipe C
>[   27.133898] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:71:eDP-1] hw state readout: enabled
>[   27.133913] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:80:HDMI-A-1] hw state readout: disabled
>[   27.133927] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:85:DP-1] hw state readout: disabled
>[   27.133942] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:90:HDMI-A-2] hw state readout: disabled
>[   27.133963] [drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][setup_hw_state]
>[   27.133980] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[   27.133996] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0
>[   27.134011] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 5288318, gmch_n: 8388608, link_m: 293795, link_n: 524288, tu: 64
>[   27.134027] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   27.134042] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   27.134044] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 151299 1920 1968 2000 2212 1080 1083 1089 1140 0x40 0x9
>[   27.134059] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   27.134060] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 151299 1920 1968 2000 2212 1080 1083 1089 1140 0x40 0x9
>[   27.134075] [drm:intel_dump_pipe_config [i915]] crtc timings: 151299 1920 1968 2000 2212 1080 1083 1089 1140, type: 0x40 flags: 0x9
>[   27.134090] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 720x400, pixel rate 151299
>[   27.134105] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[   27.134119] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[   27.134134] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   27.134148] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[   27.134161] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   27.134176] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
>[   27.134190] [drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
>[   27.134203] [drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
>[   27.134217] [drm:intel_dump_pipe_config [i915]] [CRTC:55:pipe B][setup_hw_state]
>[   27.134231] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[   27.134245] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[   27.134259] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   27.134273] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   27.134275] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   27.134288] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   27.134290] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   27.134304] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   27.134318] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[   27.134332] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[   27.134346] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   27.134360] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   27.134374] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[   27.134387] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   27.134401] [drm:intel_dump_pipe_config [i915]] [PLANE:42:plane 1B] disabled, scaler_id = -1
>[   27.134415] [drm:intel_dump_pipe_config [i915]] [PLANE:47:plane 2B] disabled, scaler_id = -1
>[   27.134428] [drm:intel_dump_pipe_config [i915]] [PLANE:52:cursor B] disabled, scaler_id = -1
>[   27.134442] [drm:intel_dump_pipe_config [i915]] [CRTC:69:pipe C][setup_hw_state]
>[   27.134456] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[   27.134470] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[   27.134483] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   27.134497] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   27.134498] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   27.134512] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   27.134513] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   27.134527] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   27.134541] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[   27.134555] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1
>[   27.134569] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   27.134582] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   27.134596] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[   27.134610] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   27.134624] [drm:intel_dump_pipe_config [i915]] [PLANE:56:plane 1C] disabled, scaler_id = -1
>[   27.134637] [drm:intel_dump_pipe_config [i915]] [PLANE:61:plane 2C] disabled, scaler_id = -1
>[   27.134651] [drm:intel_dump_pipe_config [i915]] [PLANE:66:cursor C] disabled, scaler_id = -1
>[   27.134690] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
>[   27.134707] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
>[   27.134723] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well
>[   27.134738] [drm:intel_power_well_disable [i915]] disabling power well 2
>[   27.134766] [drm:intel_wopcm_init [i915]] Calculated GuC WOPCM Region: [16KiB, 1008KiB)
>[   27.135077] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000]
>[   27.136496] [drm:i915_gem_contexts_init [i915]] logical context support initialized
>[   27.136518] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0xfffff000
>[   27.136595] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0xfffcf000
>[   27.136637] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0xfffc8000
>[   27.136675] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0xfffc1000
>[   27.136714] [drm:intel_engine_init_common [i915]] vecs0 hws offset: 0xfffba000
>[   27.136831] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 15
>[   27.137406] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping
>[   27.137424] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
>[   27.137440] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
>[   27.137456] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
>[   27.137757] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
>[   27.137783] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
>[   27.137848] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-1
>[   27.137881] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
>[   27.137975] [drm:intel_opregion_register [i915]] 4 outputs detected
>[   27.152250] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[   27.152921] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[   27.152999] i915 device info: pciid=0x5917 rev=0x07 platform=KABYLAKE gen=9
>[   27.153001] [drm:drm_setup_crtcs] 
>[   27.153002] i915 device info: is_mobile: no
>[   27.153004] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1]
>[   27.153005] i915 device info: is_lp: no
>[   27.153026] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
>[   27.153027] i915 device info: is_alpha_support: no
>[   27.153027] i915 device info: has_64bit_reloc: yes
>[   27.153047] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   27.153065] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   27.153066] i915 device info: has_aliasing_ppgtt: yes
>[   27.153067] i915 device info: has_csr: yes
>[   27.153084] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   27.153085] i915 device info: has_ddi: yes
>[   27.153085] i915 device info: has_dp_mst: yes
>[   27.153086] i915 device info: has_reset_engine: yes
>[   27.153086] i915 device info: has_fbc: yes
>[   27.153087] i915 device info: has_fpga_dbg: yes
>[   27.153087] i915 device info: has_full_ppgtt: yes
>[   27.153088] i915 device info: has_full_48bit_ppgtt: yes
>[   27.153088] i915 device info: has_gmch_display: no
>[   27.153089] i915 device info: has_guc: yes
>[   27.153089] i915 device info: has_guc_ct: no
>[   27.153090] i915 device info: has_hotplug: yes
>[   27.153090] i915 device info: has_l3_dpf: no
>[   27.153091] i915 device info: has_llc: yes
>[   27.153091] i915 device info: has_logical_ring_contexts: yes
>[   27.153092] i915 device info: has_logical_ring_elsq: no
>[   27.153092] i915 device info: has_logical_ring_preemption: yes
>[   27.153093] i915 device info: has_overlay: no
>[   27.153093] i915 device info: has_pooled_eu: no
>[   27.153094] i915 device info: has_psr: yes
>[   27.153094] i915 device info: has_rc6: yes
>[   27.153094] i915 device info: has_rc6p: no
>[   27.153095] i915 device info: has_resource_streamer: yes
>[   27.153095] i915 device info: has_runtime_pm: yes
>[   27.153096] i915 device info: has_snoop: no
>[   27.153097] i915 device info: unfenced_needs_alignment: no
>[   27.153097] i915 device info: cursor_needs_physical: no
>[   27.153098] i915 device info: hws_needs_physical: no
>[   27.153098] i915 device info: overlay_needs_physical: no
>[   27.153098] i915 device info: supports_tv: no
>[   27.153099] i915 device info: has_ipc: yes
>[   27.153100] i915 device info: slice total: 1, mask=0001
>[   27.153100] i915 device info: subslice total: 3
>[   27.153101] i915 device info: slice0: 3 subslices, mask=0007
>[   27.153102] i915 device info: slice1: 0 subslices, mask=0000
>[   27.153102] i915 device info: slice2: 0 subslices, mask=0000
>[   27.153103] i915 device info: EU total: 24
>[   27.153104] i915 device info: EU per subslice: 8
>[   27.153104] i915 device info: has slice power gating: no
>[   27.153104] i915 device info: has subslice power gating: no
>[   27.153105] i915 device info: has EU power gating: yes
>[   27.153105] i915 device info: CS timestamp frequency: 12000 kHz
>[   27.153467] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[   27.153757] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] status updated from unknown to connected
>[   27.153759] [drm:drm_add_display_info] non_desktop set to 0
>[   27.153761] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   27.153762] [drm:drm_add_display_info] non_desktop set to 0
>[   27.153777] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] probed modes :
>[   27.153779] [drm:drm_mode_debug_printmodeline] Modeline 72:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9
>[   27.153781] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9
>[   27.153782] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
>[   27.153800] [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
>[   27.167598] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   27.167614] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   27.167892] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   27.167907] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   27.167909] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] status updated from unknown to connected
>[   27.167911] [drm:drm_add_display_info] non_desktop set to 0
>[   27.167915] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   27.167916] [drm:drm_add_display_info] non_desktop set to 0
>[   27.168020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] probed modes :
>[   27.168021] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   27.168023] [drm:drm_mode_debug_printmodeline] Modeline 95:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[   27.168024] [drm:drm_mode_debug_printmodeline] Modeline 102:"1400x1050" 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9
>[   27.168026] [drm:drm_mode_debug_printmodeline] Modeline 99:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[   27.168027] [drm:drm_mode_debug_printmodeline] Modeline 108:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   27.168028] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   27.168030] [drm:drm_mode_debug_printmodeline] Modeline 97:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[   27.168031] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
>[   27.168033] [drm:drm_mode_debug_printmodeline] Modeline 98:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   27.168034] [drm:drm_mode_debug_printmodeline] Modeline 101:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[   27.168035] [drm:drm_mode_debug_printmodeline] Modeline 109:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   27.168036] [drm:drm_mode_debug_printmodeline] Modeline 110:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   27.168038] [drm:drm_mode_debug_printmodeline] Modeline 111:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[   27.168039] [drm:drm_mode_debug_printmodeline] Modeline 112:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   27.168040] [drm:drm_mode_debug_printmodeline] Modeline 103:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   27.168042] [drm:drm_mode_debug_printmodeline] Modeline 104:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   27.168043] [drm:drm_mode_debug_printmodeline] Modeline 105:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   27.168044] [drm:drm_mode_debug_printmodeline] Modeline 106:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   27.168046] [drm:drm_mode_debug_printmodeline] Modeline 107:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   27.168047] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:DP-1]
>[   27.168064] [drm:intel_dp_detect [i915]] [CONNECTOR:85:DP-1]
>[   27.168081] [drm:intel_power_well_enable [i915]] enabling power well 2
>[   27.169030] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 01 00 03 01 81 00 00 00 00 00 00 00
>[   27.170783] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   27.170799] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   27.170814] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   27.171712] [drm:drm_dp_read_desc] DP branch: OUI 00-e0-4c dev-ID  HW-rev 0.0 SW-rev 1.0 quirks 0x0000
>[   27.171727] [drm:intel_dp_detect [i915]] Sink is not MST capable
>[   27.179477] [drm:intel_power_well_disable [i915]] disabling power well 2
>[   27.179483] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:DP-1] status updated from unknown to connected
>[   27.179484] [drm:drm_add_display_info] non_desktop set to 0
>[   27.179485] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   27.179486] [drm:drm_add_display_info] non_desktop set to 0
>[   27.179540] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:DP-1] probed modes :
>[   27.179542] [drm:drm_mode_debug_printmodeline] Modeline 114:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   27.179543] [drm:drm_mode_debug_printmodeline] Modeline 115:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[   27.179545] [drm:drm_mode_debug_printmodeline] Modeline 122:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
>[   27.179546] [drm:drm_mode_debug_printmodeline] Modeline 119:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[   27.179547] [drm:drm_mode_debug_printmodeline] Modeline 128:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   27.179549] [drm:drm_mode_debug_printmodeline] Modeline 116:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   27.179550] [drm:drm_mode_debug_printmodeline] Modeline 117:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[   27.179551] [drm:drm_mode_debug_printmodeline] Modeline 120:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
>[   27.179553] [drm:drm_mode_debug_printmodeline] Modeline 118:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   27.179554] [drm:drm_mode_debug_printmodeline] Modeline 121:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[   27.179555] [drm:drm_mode_debug_printmodeline] Modeline 129:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   27.179557] [drm:drm_mode_debug_printmodeline] Modeline 130:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   27.179558] [drm:drm_mode_debug_printmodeline] Modeline 131:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[   27.179559] [drm:drm_mode_debug_printmodeline] Modeline 132:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   27.179561] [drm:drm_mode_debug_printmodeline] Modeline 123:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   27.179562] [drm:drm_mode_debug_printmodeline] Modeline 124:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   27.179563] [drm:drm_mode_debug_printmodeline] Modeline 125:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   27.179565] [drm:drm_mode_debug_printmodeline] Modeline 126:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   27.179566] [drm:drm_mode_debug_printmodeline] Modeline 127:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   27.179567] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:HDMI-A-2]
>[   27.179586] [drm:intel_hdmi_detect [i915]] [CONNECTOR:90:HDMI-A-2]
>[   27.179881] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   27.179896] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   27.180164] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   27.180179] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   27.180194] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   27.180209] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[   27.182851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   27.182866] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[   27.183158] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   27.183171] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   27.183375] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   27.183391] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   27.183392] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:HDMI-A-2] status updated from unknown to disconnected
>[   27.183394] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:HDMI-A-2] disconnected
>[   27.183395] [drm:drm_setup_crtcs] connector 71 enabled? yes
>[   27.183396] [drm:drm_setup_crtcs] connector 80 enabled? yes
>[   27.183397] [drm:drm_setup_crtcs] connector 85 enabled? yes
>[   27.183398] [drm:drm_setup_crtcs] connector 90 enabled? no
>[   27.183415] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[   27.183417] [drm:drm_setup_crtcs] looking for cmdline mode on connector 71
>[   27.183418] [drm:drm_setup_crtcs] looking for preferred mode on connector 71 0
>[   27.183419] [drm:drm_setup_crtcs] found mode 1920x1080
>[   27.183420] [drm:drm_setup_crtcs] looking for cmdline mode on connector 80
>[   27.183421] [drm:drm_setup_crtcs] looking for preferred mode on connector 80 0
>[   27.183422] [drm:drm_setup_crtcs] found mode 1920x1080
>[   27.183423] [drm:drm_setup_crtcs] looking for cmdline mode on connector 85
>[   27.183423] [drm:drm_setup_crtcs] looking for preferred mode on connector 85 0
>[   27.183424] [drm:drm_setup_crtcs] found mode 1920x1080
>[   27.183425] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[   27.183429] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 41 (0,0)
>[   27.183431] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 55 (0,0)
>[   27.183432] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 69 (0,0)
>[   27.183449] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
>[   27.184287] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00040000
>[   27.184309] fbcon: inteldrmfb (fb0) is primary device
>[   27.184361] [drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
>[   27.184378] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 18
>[   27.184381] [drm:drm_mode_debug_printmodeline] Modeline 75:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9
>[   27.184399] [drm:skl_update_scaler [i915]] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
>[   27.184416] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 151300KHz
>[   27.184433] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
>[   27.184448] [drm:intel_dp_compute_config [i915]] DP link bw required 340425 available 540000
>[   27.184466] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[   27.184483] [drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
>[   27.184500] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[   27.184516] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1
>[   27.184532] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 5288318, gmch_n: 8388608, link_m: 293795, link_n: 524288, tu: 64
>[   27.184547] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   27.184562] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   27.184564] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9
>[   27.184578] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   27.184580] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9
>[   27.184595] [drm:intel_dump_pipe_config [i915]] crtc timings: 151300 1920 1968 2000 2212 1080 1083 1089 1140, type: 0x48 flags: 0x9
>[   27.184609] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 151300
>[   27.184623] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[   27.184638] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   27.184652] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   27.184666] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[   27.184680] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   27.184694] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
>[   27.184709] [drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
>[   27.184723] [drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
>[   27.184739] [drm:intel_atomic_check [i915]] [CONNECTOR:80:HDMI-A-1] checking for sink bpp constrains
>[   27.184755] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[   27.184773] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output
>[   27.184790] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpp to 24 for HDMI
>[   27.184806] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[   27.184822] [drm:intel_dump_pipe_config [i915]] [CRTC:55:pipe B][modeset]
>[   27.184838] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40)
>[   27.184853] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0
>[   27.184868] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   27.184882] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   27.184884] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   27.184898] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   27.184899] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   27.184914] [drm:intel_dump_pipe_config [i915]] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
>[   27.184928] [drm:intel_dump_pipe_config [i915]] port clock: 148500, pipe src size: 1920x1080, pixel rate 148500
>[   27.184942] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[   27.184956] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   27.184970] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   27.184984] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[   27.184998] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   27.185012] [drm:intel_dump_pipe_config [i915]] [PLANE:42:plane 1B] disabled, scaler_id = -1
>[   27.185026] [drm:intel_dump_pipe_config [i915]] [PLANE:47:plane 2B] disabled, scaler_id = -1
>[   27.185040] [drm:intel_dump_pipe_config [i915]] [PLANE:52:cursor B] disabled, scaler_id = -1
>[   27.185056] [drm:intel_atomic_check [i915]] [CONNECTOR:85:DP-1] checking for sink bpp constrains
>[   27.185072] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[   27.185090] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 148500KHz
>[   27.185107] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[   27.185123] [drm:intel_dp_compute_config [i915]] DP link bw required 445500 available 540000
>[   27.185140] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[   27.185157] [drm:intel_dump_pipe_config [i915]] [CRTC:69:pipe C][modeset]
>[   27.185173] [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80)
>[   27.185188] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 24, dithering: 0
>[   27.185203] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
>[   27.185218] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   27.185232] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   27.185234] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   27.185248] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   27.185249] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   27.185264] [drm:intel_dump_pipe_config [i915]] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
>[   27.185278] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 148500
>[   27.185292] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1
>[   27.185306] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   27.185320] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   27.185334] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[   27.185348] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   27.185361] [drm:intel_dump_pipe_config [i915]] [PLANE:56:plane 1C] disabled, scaler_id = -1
>[   27.185375] [drm:intel_dump_pipe_config [i915]] [PLANE:61:plane 2C] disabled, scaler_id = -1
>[   27.185389] [drm:intel_dump_pipe_config [i915]] [PLANE:66:cursor C] disabled, scaler_id = -1
>[   27.185405] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
>[   27.185421] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
>[   27.185440] [drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
>[   27.185456] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
>[   27.185475] [drm:intel_find_shared_dpll [i915]] [CRTC:55:pipe B] allocated DPLL 1
>[   27.185490] [drm:intel_reference_shared_dpll [i915]] using DPLL 1 for pipe B
>[   27.185506] [drm:intel_find_shared_dpll [i915]] [CRTC:69:pipe C] allocated DPLL 2
>[   27.185521] [drm:intel_reference_shared_dpll [i915]] using DPLL 2 for pipe C
>[   27.185549] [drm:intel_edp_backlight_off [i915]] 
>[   27.392188] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[   27.392236] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling
>[   27.392269] [drm:intel_disable_pipe [i915]] disabling pipe A
>[   27.400345] [drm:intel_edp_panel_off.part.30 [i915]] Turn eDP port A panel power off
>[   27.400385] [drm:intel_edp_panel_off.part.30 [i915]] Wait for panel power off time
>[   27.400455] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control abcd0000
>[   27.452196] [drm:wait_panel_status [i915]] Wait complete
>[   27.452230] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
>[   27.452250] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 41
>[   27.452267] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
>[   27.452282] [drm:intel_power_well_enable [i915]] enabling power well 2
>[   27.452306] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
>[   27.452330] [drm:intel_disable_sagv [i915]] Disabling the SAGV
>[   27.452355] [drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
>[   27.452371] [drm:intel_atomic_commit_tail [i915]] [ENCODER:79:DDI B]
>[   27.452386] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DDI C]
>[   27.452401] [drm:intel_atomic_commit_tail [i915]] [ENCODER:86:DP-MST A]
>[   27.452415] [drm:intel_atomic_commit_tail [i915]] [ENCODER:87:DP-MST B]
>[   27.452429] [drm:intel_atomic_commit_tail [i915]] [ENCODER:88:DP-MST C]
>[   27.452444] [drm:verify_single_dpll_state.isra.45 [i915]] DPLL 0
>[   27.452459] [drm:verify_single_dpll_state.isra.45 [i915]] DPLL 1
>[   27.452474] [drm:verify_single_dpll_state.isra.45 [i915]] DPLL 2
>[   27.452488] [drm:verify_single_dpll_state.isra.45 [i915]] DPLL 3
>[   27.452506] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 41
>[   27.452521] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
>[   27.452546] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[   27.452568] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[   27.452911] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[   27.452931] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[   27.452949] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
>[   27.453005] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[   28.064360] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000
>[   28.064384] [drm:wait_panel_status [i915]] Wait complete
>[   28.064421] [drm:edp_panel_on [i915]] Wait for panel power on
>[   28.064489] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 0000000a control abcd0003
>[   28.161931] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[   28.161950] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[   28.161968] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
>[   28.162028] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[   28.267101] [drm:wait_panel_status [i915]] Wait complete
>[   28.267121] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>[   28.267152] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[   28.267214] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   28.268278] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[   28.268294] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[   28.268309] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[   28.268324] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[   28.268925] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[   28.268941] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[   28.269840] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[   28.269856] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
>[   28.270219] [drm:intel_enable_pipe [i915]] enabling pipe A
>[   28.270240] [drm:intel_edp_backlight_on [i915]] 
>[   28.270257] [drm:intel_panel_enable_backlight [i915]] pipe A
>[   28.270325] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500
>[   28.276039] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS
>[   28.276059] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[   28.276075] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
>[   28.287052] [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 2, on? 0) for crtc 55
>[   28.287068] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1
>[   28.287159] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
>[   28.287385] [drm:intel_enable_pipe [i915]] enabling pipe B
>[   28.287812] [drm:intel_enable_shared_dpll [i915]] enable DPLL 2 (active 4, on? 0) for crtc 69
>[   28.287828] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 2
>[   28.287918] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>[   28.289761] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[   28.289777] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[   28.289793] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[   28.289808] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[   28.291190] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[   28.291205] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[   28.292884] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[   28.293208] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:85:DP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
>[   28.293851] [drm:intel_enable_pipe [i915]] enabling pipe C
>[   28.293873] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS
>[   28.310676] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:71:eDP-1]
>[   28.310697] [drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
>[   28.310722] [drm:verify_single_dpll_state.isra.45 [i915]] DPLL 0
>[   28.310748] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:80:HDMI-A-1]
>[   28.310766] [drm:intel_atomic_commit_tail [i915]] [CRTC:55:pipe B]
>[   28.310789] [drm:verify_single_dpll_state.isra.45 [i915]] DPLL 1
>[   28.310815] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:85:DP-1]
>[   28.310833] [drm:intel_atomic_commit_tail [i915]] [CRTC:69:pipe C]
>[   28.310855] [drm:verify_single_dpll_state.isra.45 [i915]] DPLL 2
>[   28.310885] Console: switching to colour frame buffer device 240x67
>[   28.329593] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[   28.344116] [drm:drm_fb_helper_hotplug_event.part.26] 
>[   28.344117] [drm:drm_setup_crtcs] 
>[   28.344119] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1]
>[   28.344140] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
>[   28.344177] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   28.344188] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   28.344195] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   28.344588] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[   28.344877] [drm:drm_add_display_info] non_desktop set to 0
>[   28.344879] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   28.344879] [drm:drm_add_display_info] non_desktop set to 0
>[   28.344894] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] probed modes :
>[   28.344896] [drm:drm_mode_debug_printmodeline] Modeline 72:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9
>[   28.344898] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9
>[   28.344899] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
>[   28.344908] [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
>[   28.358582] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   28.358589] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   28.358858] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   28.358873] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   28.358874] [drm:drm_add_display_info] non_desktop set to 0
>[   28.358876] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   28.358876] [drm:drm_add_display_info] non_desktop set to 0
>[   28.358974] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] probed modes :
>[   28.358976] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   28.358977] [drm:drm_mode_debug_printmodeline] Modeline 95:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[   28.358979] [drm:drm_mode_debug_printmodeline] Modeline 102:"1400x1050" 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9
>[   28.358980] [drm:drm_mode_debug_printmodeline] Modeline 99:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[   28.358982] [drm:drm_mode_debug_printmodeline] Modeline 108:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   28.358983] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   28.358984] [drm:drm_mode_debug_printmodeline] Modeline 97:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[   28.358986] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
>[   28.358987] [drm:drm_mode_debug_printmodeline] Modeline 98:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   28.358988] [drm:drm_mode_debug_printmodeline] Modeline 101:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[   28.358990] [drm:drm_mode_debug_printmodeline] Modeline 109:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   28.358991] [drm:drm_mode_debug_printmodeline] Modeline 110:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   28.358992] [drm:drm_mode_debug_printmodeline] Modeline 111:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[   28.358994] [drm:drm_mode_debug_printmodeline] Modeline 112:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   28.358995] [drm:drm_mode_debug_printmodeline] Modeline 103:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   28.358996] [drm:drm_mode_debug_printmodeline] Modeline 104:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   28.358998] [drm:drm_mode_debug_printmodeline] Modeline 105:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   28.358999] [drm:drm_mode_debug_printmodeline] Modeline 106:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   28.359000] [drm:drm_mode_debug_printmodeline] Modeline 107:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   28.359001] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:DP-1]
>[   28.359010] [drm:intel_dp_detect [i915]] [CONNECTOR:85:DP-1]
>[   28.359944] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 01 00 03 01 81 00 00 00 00 00 00 00
>[   28.361686] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   28.361693] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   28.361700] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   28.362597] [drm:drm_dp_read_desc] DP branch: OUI 00-e0-4c dev-ID  HW-rev 0.0 SW-rev 1.0 quirks 0x0000
>[   28.362604] [drm:intel_dp_detect [i915]] Sink is not MST capable
>[   28.370326] [drm:drm_add_display_info] non_desktop set to 0
>[   28.370327] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   28.370327] [drm:drm_add_display_info] non_desktop set to 0
>[   28.370380] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:DP-1] probed modes :
>[   28.370382] [drm:drm_mode_debug_printmodeline] Modeline 114:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   28.370383] [drm:drm_mode_debug_printmodeline] Modeline 115:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[   28.370385] [drm:drm_mode_debug_printmodeline] Modeline 122:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
>[   28.370386] [drm:drm_mode_debug_printmodeline] Modeline 119:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[   28.370387] [drm:drm_mode_debug_printmodeline] Modeline 128:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   28.370389] [drm:drm_mode_debug_printmodeline] Modeline 116:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   28.370390] [drm:drm_mode_debug_printmodeline] Modeline 117:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[   28.370391] [drm:drm_mode_debug_printmodeline] Modeline 120:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
>[   28.370393] [drm:drm_mode_debug_printmodeline] Modeline 118:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   28.370394] [drm:drm_mode_debug_printmodeline] Modeline 121:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[   28.370395] [drm:drm_mode_debug_printmodeline] Modeline 129:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   28.370397] [drm:drm_mode_debug_printmodeline] Modeline 130:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   28.370398] [drm:drm_mode_debug_printmodeline] Modeline 131:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[   28.370399] [drm:drm_mode_debug_printmodeline] Modeline 132:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   28.370401] [drm:drm_mode_debug_printmodeline] Modeline 123:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   28.370402] [drm:drm_mode_debug_printmodeline] Modeline 124:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   28.370403] [drm:drm_mode_debug_printmodeline] Modeline 125:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   28.370404] [drm:drm_mode_debug_printmodeline] Modeline 126:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   28.370406] [drm:drm_mode_debug_printmodeline] Modeline 127:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   28.370407] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:HDMI-A-2]
>[   28.370414] [drm:intel_hdmi_detect [i915]] [CONNECTOR:90:HDMI-A-2]
>[   28.370700] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   28.370707] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   28.370903] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   28.370918] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   28.370925] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   28.370932] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[   28.373571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   28.373578] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[   28.373790] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   28.373797] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   28.373993] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   28.374009] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   28.374010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:HDMI-A-2] disconnected
>[   28.374012] [drm:drm_setup_crtcs] connector 71 enabled? yes
>[   28.374013] [drm:drm_setup_crtcs] connector 80 enabled? yes
>[   28.374014] [drm:drm_setup_crtcs] connector 85 enabled? yes
>[   28.374014] [drm:drm_setup_crtcs] connector 90 enabled? no
>[   28.374023] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[   28.374024] [drm:drm_setup_crtcs] looking for cmdline mode on connector 71
>[   28.374025] [drm:drm_setup_crtcs] looking for preferred mode on connector 71 0
>[   28.374026] [drm:drm_setup_crtcs] found mode 1920x1080
>[   28.374027] [drm:drm_setup_crtcs] looking for cmdline mode on connector 80
>[   28.374028] [drm:drm_setup_crtcs] looking for preferred mode on connector 80 0
>[   28.374029] [drm:drm_setup_crtcs] found mode 1920x1080
>[   28.374030] [drm:drm_setup_crtcs] looking for cmdline mode on connector 85
>[   28.374031] [drm:drm_setup_crtcs] looking for preferred mode on connector 85 0
>[   28.374031] [drm:drm_setup_crtcs] found mode 1920x1080
>[   28.374032] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
>[   28.374037] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 41 (0,0)
>[   28.374038] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 55 (0,0)
>[   28.374039] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 69 (0,0)
>[   28.387910] [drm:drm_fb_helper_hotplug_event.part.26] 
>[   28.387911] [drm:drm_setup_crtcs] 
>[   28.387913] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1]
>[   28.387920] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
>[   28.387928] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   28.387935] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   28.387942] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   28.388320] [drm:drm_dp_read_desc] DP sink: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[   28.388606] [drm:drm_add_display_info] non_desktop set to 0
>[   28.388607] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   28.388608] [drm:drm_add_display_info] non_desktop set to 0
>[   28.388621] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:eDP-1] probed modes :
>[   28.388622] [drm:drm_mode_debug_printmodeline] Modeline 72:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9
>[   28.388624] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9
>[   28.388625] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
>[   28.388632] [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
>[   28.402415] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   28.402422] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   28.402690] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   28.402705] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   28.402706] [drm:drm_add_display_info] non_desktop set to 0
>[   28.402707] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   28.402708] [drm:drm_add_display_info] non_desktop set to 0
>[   28.402802] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] probed modes :
>[   28.402804] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   28.402805] [drm:drm_mode_debug_printmodeline] Modeline 95:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[   28.402806] [drm:drm_mode_debug_printmodeline] Modeline 102:"1400x1050" 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9
>[   28.402808] [drm:drm_mode_debug_printmodeline] Modeline 99:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[   28.402809] [drm:drm_mode_debug_printmodeline] Modeline 108:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   28.402810] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   28.402812] [drm:drm_mode_debug_printmodeline] Modeline 97:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[   28.402813] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
>[   28.402814] [drm:drm_mode_debug_printmodeline] Modeline 98:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   28.402816] [drm:drm_mode_debug_printmodeline] Modeline 101:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[   28.402817] [drm:drm_mode_debug_printmodeline] Modeline 109:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   28.402818] [drm:drm_mode_debug_printmodeline] Modeline 110:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   28.402820] [drm:drm_mode_debug_printmodeline] Modeline 111:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[   28.402821] [drm:drm_mode_debug_printmodeline] Modeline 112:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   28.402822] [drm:drm_mode_debug_printmodeline] Modeline 103:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   28.402824] [drm:drm_mode_debug_printmodeline] Modeline 104:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   28.402825] [drm:drm_mode_debug_printmodeline] Modeline 105:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   28.402826] [drm:drm_mode_debug_printmodeline] Modeline 106:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   28.402828] [drm:drm_mode_debug_printmodeline] Modeline 107:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   28.402829] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:DP-1]
>[   28.402836] [drm:intel_dp_detect [i915]] [CONNECTOR:85:DP-1]
>[   28.403770] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 01 00 03 01 81 00 00 00 00 00 00 00
>[   28.405511] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   28.405517] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[   28.405524] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[   28.406421] [drm:drm_dp_read_desc] DP branch: OUI 00-e0-4c dev-ID  HW-rev 0.0 SW-rev 1.0 quirks 0x0000
>[   28.406428] [drm:intel_dp_detect [i915]] Sink is not MST capable
>[   28.414148] [drm:drm_add_display_info] non_desktop set to 0
>[   28.414149] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   28.414150] [drm:drm_add_display_info] non_desktop set to 0
>[   28.414202] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:DP-1] probed modes :
>[   28.414203] [drm:drm_mode_debug_printmodeline] Modeline 114:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[   28.414205] [drm:drm_mode_debug_printmodeline] Modeline 115:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[   28.414206] [drm:drm_mode_debug_printmodeline] Modeline 122:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
>[   28.414207] [drm:drm_mode_debug_printmodeline] Modeline 119:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[   28.414209] [drm:drm_mode_debug_printmodeline] Modeline 128:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   28.414210] [drm:drm_mode_debug_printmodeline] Modeline 116:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   28.414211] [drm:drm_mode_debug_printmodeline] Modeline 117:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[   28.414213] [drm:drm_mode_debug_printmodeline] Modeline 120:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
>[   28.414214] [drm:drm_mode_debug_printmodeline] Modeline 118:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   28.414216] [drm:drm_mode_debug_printmodeline] Modeline 121:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[   28.414217] [drm:drm_mode_debug_printmodeline] Modeline 129:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   28.414218] [drm:drm_mode_debug_printmodeline] Modeline 130:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   28.414220] [drm:drm_mode_debug_printmodeline] Modeline 131:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[   28.414221] [drm:drm_mode_debug_printmodeline] Modeline 132:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   28.414222] [drm:drm_mode_debug_printmodeline] Modeline 123:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   28.414224] [drm:drm_mode_debug_printmodeline] Modeline 124:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[   28.414225] [drm:drm_mode_debug_printmodeline] Modeline 125:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   28.414226] [drm:drm_mode_debug_printmodeline] Modeline 126:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   28.414227] [drm:drm_mode_debug_printmodeline] Modeline 127:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   28.414229] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:HDMI-A-2]
>[   28.414236] [drm:intel_hdmi_detect [i915]] [CONNECTOR:90:HDMI-A-2]
>[   28.414520] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   28.414527] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   28.414724] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   28.414738] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   28.414745] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   28.414753] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[   28.417390] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   28.417397] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[   28.417609] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   28.417616] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   28.417812] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   28.417827] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   28.417829] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:90:HDMI-A-2] disconnected
>[   28.417830] [drm:drm_setup_crtcs] connector 71 enabled? yes
>[   28.417831] [drm:drm_setup_crtcs] connector 80 enabled? yes
>[   28.417832] [drm:drm_setup_crtcs] connector 85 enabled? yes
>[   28.417833] [drm:drm_setup_crtcs] connector 90 enabled? no
>[   28.417840] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[   28.417842] [drm:drm_setup_crtcs] looking for cmdline mode on connector 71
>[   28.417843] [drm:drm_setup_crtcs] looking for preferred mode on connector 71 0
>[   28.417844] [drm:drm_setup_crtcs] found mode 1920x1080
>[   28.417845] [drm:drm_setup_crtcs] looking for cmdline mode on connector 80
>[   28.417846] [drm:drm_setup_crtcs] looking for preferred mode on connector 80 0
>[   28.417846] [drm:drm_setup_crtcs] found mode 1920x1080
>[   28.417847] [drm:drm_setup_crtcs] looking for cmdline mode on connector 85
>[   28.417848] [drm:drm_setup_crtcs] looking for preferred mode on connector 85 0
>[   28.417849] [drm:drm_setup_crtcs] found mode 1920x1080
>[   28.417850] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
>[   28.417854] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 41 (0,0)
>[   28.417855] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 55 (0,0)
>[   28.417856] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 69 (0,0)
>[   31.452300] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[   31.452355] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007

Actions: View

Attachments on bug 105549: 138152 | 138168 | 138401 | 138705 | 138711 | 138749 | 138750 | 138753 | 138754 | 138885 | 138895

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.